Nortel-MsCarrier-MscPassport-FraDpnTrunksMIB

File: Nortel-MsCarrier-MscPassport-FraDpnTrunksMIB.mib (38524 bytes)

Imported modules

RFC-1212	Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB	Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB	Nortel-MsCarrier-MscPassport-DpnTrunksMIB

Imported symbols

OBJECT-TYPE	mscPassportMIBs	Counter32
RowPointer	DisplayString	StorageType
RowStatus	Gauge32	Unsigned32
NonReplicated	Link	mscDpnGateIndex
mscDpnGate

Defined Types

MscDpnGateFrAccessRowStatusEntry
SEQUENCE
	mscDpnGateFrAccessRowStatus	RowStatus
	mscDpnGateFrAccessComponentName	DisplayString
	mscDpnGateFrAccessStorageType	StorageType
	mscDpnGateFrAccessIndex	NonReplicated

MscDpnGateFrAccessProvEntry
SEQUENCE
	mscDpnGateFrAccessMaximumErroredInterval	Unsigned32
	mscDpnGateFrAccessReceiveErrorSensitivity	Unsigned32

MscDpnGateFrAccessStateEntry
SEQUENCE
	mscDpnGateFrAccessAdminState	INTEGER
	mscDpnGateFrAccessOperationalState	INTEGER
	mscDpnGateFrAccessUsageState	INTEGER
	mscDpnGateFrAccessAvailabilityStatus	OCTET STRING
	mscDpnGateFrAccessProceduralStatus	OCTET STRING
	mscDpnGateFrAccessControlStatus	OCTET STRING
	mscDpnGateFrAccessAlarmStatus	OCTET STRING
	mscDpnGateFrAccessStandbyStatus	INTEGER
	mscDpnGateFrAccessUnknownStatus	INTEGER

MscDpnGateFrAccessOpEntry
SEQUENCE
	mscDpnGateFrAccessRoundTripDelay	Gauge32

MscDpnGateFrAccessStatsEntry
SEQUENCE
	mscDpnGateFrAccessReceivedBytesFromIf	Counter32
	mscDpnGateFrAccessLostFramesFromIf	Counter32
	mscDpnGateFrAccessDiscardBadFromIf	Counter32
	mscDpnGateFrAccessDiscardExcessToIf	Counter32

MscDpnGateFrAccessFrMuxSetupRowStatusEntry
SEQUENCE
	mscDpnGateFrAccessFrMuxSetupRowStatus	RowStatus
	mscDpnGateFrAccessFrMuxSetupComponentName	DisplayString
	mscDpnGateFrAccessFrMuxSetupStorageType	StorageType
	mscDpnGateFrAccessFrMuxSetupIndex	NonReplicated

MscDpnGateFrAccessFrMuxSetupTrafficDescrEntry
SEQUENCE
	mscDpnGateFrAccessFrMuxSetupCommittedInformationRate	Unsigned32
	mscDpnGateFrAccessFrMuxSetupCommittedBurstSize	Unsigned32
	mscDpnGateFrAccessFrMuxSetupMaximumFrameSize	Unsigned32

MscDpnGateFrAccessFrMuxSetupDlciCompNameOpEntry
SEQUENCE
	mscDpnGateFrAccessFrMuxSetupDlciCompName	RowPointer

MscDpnGateFrAccessFrMuxSetupPvcSetupRowStatusEntry
SEQUENCE
	mscDpnGateFrAccessFrMuxSetupPvcSetupRowStatus	RowStatus
	mscDpnGateFrAccessFrMuxSetupPvcSetupComponentName	DisplayString
	mscDpnGateFrAccessFrMuxSetupPvcSetupStorageType	StorageType
	mscDpnGateFrAccessFrMuxSetupPvcSetupIndex	NonReplicated

MscDpnGateFrAccessFrMuxSetupPvcSetupProvEntry
SEQUENCE
	mscDpnGateFrAccessFrMuxSetupPvcSetupDlciName	Link

Defined Values

fraDpnTrunksMIB		1.3.6.1.4.1.562.36.2.2.68
OBJECT IDENTIFIER

mscDpnGateFrAccess		1.3.6.1.4.1.562.36.2.1.61.4
OBJECT IDENTIFIER

mscDpnGateFrAccessRowStatusTable		1.3.6.1.4.1.562.36.2.1.61.4.1
This entry controls the addition and deletion of mscDpnGateFrAccess components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscDpnGateFrAccessRowStatusEntry

mscDpnGateFrAccessRowStatusEntry		1.3.6.1.4.1.562.36.2.1.61.4.1.1
A single entry in the table represents a single mscDpnGateFrAccess component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscDpnGateFrAccessRowStatusEntry

mscDpnGateFrAccessRowStatus		1.3.6.1.4.1.562.36.2.1.61.4.1.1.1
This variable is used as the basis for SNMP naming of mscDpnGateFrAccess components. These components can be added and deleted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

mscDpnGateFrAccessComponentName		1.3.6.1.4.1.562.36.2.1.61.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscDpnGateFrAccessStorageType		1.3.6.1.4.1.562.36.2.1.61.4.1.1.4
This variable represents the storage type value for the mscDpnGateFrAccess tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscDpnGateFrAccessIndex		1.3.6.1.4.1.562.36.2.1.61.4.1.1.10
This variable represents the index for the mscDpnGateFrAccess tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

mscDpnGateFrAccessProvTable		1.3.6.1.4.1.562.36.2.1.61.4.10
This group of provisionable attributes contains the parameters used by Unacknowledged, Utp, and FrAccess for monitoring link quality.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscDpnGateFrAccessProvEntry

mscDpnGateFrAccessProvEntry		1.3.6.1.4.1.562.36.2.1.61.4.10.1
An entry in the mscDpnGateFrAccessProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscDpnGateFrAccessProvEntry

mscDpnGateFrAccessMaximumErroredInterval		1.3.6.1.4.1.562.36.2.1.61.4.10.1.1
This attribute specifies the interval time over which the error threshold (as specified by receiveErrorSensitivity) must be continuously exceeded before the Unacknowledged, Utp, or FrAccess component can be degraded. Once the error interval count exceeds the provisioned value, the Unacknowledged, Utp, or FrAccess component issues an alarm indicating that link quality has degraded, and it disables its parent component. The exception to this is a value of zero, the default, which indicates that the mechanism is completely disabled.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0 \| 1..15

mscDpnGateFrAccessReceiveErrorSensitivity		1.3.6.1.4.1.562.36.2.1.61.4.10.1.2
This attribute is the allowable error rate beyond which the Unacknowledged, Utp, or FrAccess component can be degraded if it persists for a duration longer than the maximumErrorInterval. The threshold is expressed as a percentage of number of errored frames in the last interval per number of frames received in the last interval. The exception to this is a value of zero, which indicates that the mechanism is completely disabled. The configurable values are: 0 = the mechanism is completely disabled 1 = 1/(21) 2 = 1/(22) 3 = 1/(23) : 10 = 1/(210)
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0 \| 1..10

mscDpnGateFrAccessStateTable		1.3.6.1.4.1.562.36.2.1.61.4.11
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscDpnGateFrAccessStateEntry

mscDpnGateFrAccessStateEntry		1.3.6.1.4.1.562.36.2.1.61.4.11.1
An entry in the mscDpnGateFrAccessStateTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscDpnGateFrAccessStateEntry

mscDpnGateFrAccessAdminState		1.3.6.1.4.1.562.36.2.1.61.4.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	locked(0), unlocked(1), shuttingDown(2)

mscDpnGateFrAccessOperationalState		1.3.6.1.4.1.562.36.2.1.61.4.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

mscDpnGateFrAccessUsageState		1.3.6.1.4.1.562.36.2.1.61.4.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	idle(0), active(1), busy(2)

mscDpnGateFrAccessAvailabilityStatus		1.3.6.1.4.1.562.36.2.1.61.4.11.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

mscDpnGateFrAccessProceduralStatus		1.3.6.1.4.1.562.36.2.1.61.4.11.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

mscDpnGateFrAccessControlStatus		1.3.6.1.4.1.562.36.2.1.61.4.11.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

mscDpnGateFrAccessAlarmStatus		1.3.6.1.4.1.562.36.2.1.61.4.11.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

mscDpnGateFrAccessStandbyStatus		1.3.6.1.4.1.562.36.2.1.61.4.11.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hotStandby(0), coldStandby(1), providingService(2), notSet(15)

mscDpnGateFrAccessUnknownStatus		1.3.6.1.4.1.562.36.2.1.61.4.11.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

mscDpnGateFrAccessOpTable		1.3.6.1.4.1.562.36.2.1.61.4.12
This group of attributes contains the set of LTP operational parameters measured and maintained by this component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscDpnGateFrAccessOpEntry

mscDpnGateFrAccessOpEntry		1.3.6.1.4.1.562.36.2.1.61.4.12.1
An entry in the mscDpnGateFrAccessOpTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscDpnGateFrAccessOpEntry

mscDpnGateFrAccessRoundTripDelay		1.3.6.1.4.1.562.36.2.1.61.4.12.1.1
This is the measured Round Trip Delay (ms) discovered with the remote through the LTP staging protocol. The value includes emission, propagation, and queuing delays. A 2 byte control frame is used to perform the measurement. A value of zero is displayed when the link is disabled or the measured Round Trip Delay is unknown.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge32	0..1500

mscDpnGateFrAccessStatsTable		1.3.6.1.4.1.562.36.2.1.61.4.13
This group contains the operational statistics for FrAccess.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscDpnGateFrAccessStatsEntry

mscDpnGateFrAccessStatsEntry		1.3.6.1.4.1.562.36.2.1.61.4.13.1
An entry in the mscDpnGateFrAccessStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscDpnGateFrAccessStatsEntry

mscDpnGateFrAccessReceivedBytesFromIf		1.3.6.1.4.1.562.36.2.1.61.4.13.1.1
This attribute counts the number of bytes received by FrAccess in information frames. When the maximum count is reached the count wraps to zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscDpnGateFrAccessLostFramesFromIf		1.3.6.1.4.1.562.36.2.1.61.4.13.1.2
This attribute counts the frames lost in the direction from interface, the loss of which is detected based on the sequence number mechanism. The reason for a loss may be the congestion-related loss in the external frame relay network, or errors/congestion developing in the FrMux service. When FrMux statistics do not show errors/congestion developing internally in FrMux, then the losses visible through this statistic should be attributed to the external frame relay network. When the maximum count is reached the count wraps to zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscDpnGateFrAccessDiscardBadFromIf		1.3.6.1.4.1.562.36.2.1.61.4.13.1.3
This attribute counts the number of frames discarded in the direction 'from interface', because they are unknown to the FrAccess protocol. When the maximum count is reached the count wraps to zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscDpnGateFrAccessDiscardExcessToIf		1.3.6.1.4.1.562.36.2.1.61.4.13.1.4
This attribute counts the number of frames discarded in the direction 'to interface' because of congestion on the transmit queue. When the maximum count is reached the count wraps to zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscDpnGateFrAccessFrMuxSetup		1.3.6.1.4.1.562.36.2.1.61.4.2
OBJECT IDENTIFIER

mscDpnGateFrAccessFrMuxSetupRowStatusTable		1.3.6.1.4.1.562.36.2.1.61.4.2.1
This entry controls the addition and deletion of mscDpnGateFrAccessFrMuxSetup components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscDpnGateFrAccessFrMuxSetupRowStatusEntry

mscDpnGateFrAccessFrMuxSetupRowStatusEntry		1.3.6.1.4.1.562.36.2.1.61.4.2.1.1
A single entry in the table represents a single mscDpnGateFrAccessFrMuxSetup component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscDpnGateFrAccessFrMuxSetupRowStatusEntry

mscDpnGateFrAccessFrMuxSetupRowStatus		1.3.6.1.4.1.562.36.2.1.61.4.2.1.1.1
This variable is used as the basis for SNMP naming of mscDpnGateFrAccessFrMuxSetup components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

mscDpnGateFrAccessFrMuxSetupComponentName		1.3.6.1.4.1.562.36.2.1.61.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscDpnGateFrAccessFrMuxSetupStorageType		1.3.6.1.4.1.562.36.2.1.61.4.2.1.1.4
This variable represents the storage type value for the mscDpnGateFrAccessFrMuxSetup tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscDpnGateFrAccessFrMuxSetupIndex		1.3.6.1.4.1.562.36.2.1.61.4.2.1.1.10
This variable represents the index for the mscDpnGateFrAccessFrMuxSetup tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

mscDpnGateFrAccessFrMuxSetupTrafficDescrTable		1.3.6.1.4.1.562.36.2.1.61.4.2.10
This group contains the provisionable attributes for the application of which this FrMuxSetup is a subcomponent. The parameters are used for maximum frame size checking and traffic shaping and are to be passed over to FrMux Dlci associated with the application. The attributes in this group are defined in T1.606 Addendum 1.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscDpnGateFrAccessFrMuxSetupTrafficDescrEntry

mscDpnGateFrAccessFrMuxSetupTrafficDescrEntry		1.3.6.1.4.1.562.36.2.1.61.4.2.10.1
An entry in the mscDpnGateFrAccessFrMuxSetupTrafficDescrTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscDpnGateFrAccessFrMuxSetupTrafficDescrEntry

mscDpnGateFrAccessFrMuxSetupCommittedInformationRate		1.3.6.1.4.1.562.36.2.1.61.4.2.10.1.1
This attribute specifies, in bit/s, the committed information rate (CIR) to which the traffic transmitted towards the interface is shaped. The minimum value is 4800 bit/s.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	4800..2048000

mscDpnGateFrAccessFrMuxSetupCommittedBurstSize		1.3.6.1.4.1.562.36.2.1.61.4.2.10.1.2
THIS ATTRIBUTE IS NOT BEING USED.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Unsigned32	0..2048000

mscDpnGateFrAccessFrMuxSetupMaximumFrameSize		1.3.6.1.4.1.562.36.2.1.61.4.2.10.1.3
This attribute specifies the maximum number of octets which may be included in the information field. The frame relay header and CRC octets are not included in this definition. This attribute corresponds to the dN1 parameter described in the Vendor Forum Specification.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	1..4096

mscDpnGateFrAccessFrMuxSetupDlciCompNameOpTable		1.3.6.1.4.1.562.36.2.1.61.4.2.11
This group contains the component name of the Dlci which carries the traffic for this application.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscDpnGateFrAccessFrMuxSetupDlciCompNameOpEntry

mscDpnGateFrAccessFrMuxSetupDlciCompNameOpEntry		1.3.6.1.4.1.562.36.2.1.61.4.2.11.1
An entry in the mscDpnGateFrAccessFrMuxSetupDlciCompNameOpTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscDpnGateFrAccessFrMuxSetupDlciCompNameOpEntry

mscDpnGateFrAccessFrMuxSetupDlciCompName		1.3.6.1.4.1.562.36.2.1.61.4.2.11.1.1
This attribute specifies the component name of the Dlci with which the application using this FrMuxSetup component is associated. The name is a string FrMux/n Dlci/m. For a PVC this is the same component name as provisioned under the subcomponent FrMuxPvcSetup.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowPointer

mscDpnGateFrAccessFrMuxSetupPvcSetup		1.3.6.1.4.1.562.36.2.1.61.4.2.2
OBJECT IDENTIFIER

mscDpnGateFrAccessFrMuxSetupPvcSetupRowStatusTable		1.3.6.1.4.1.562.36.2.1.61.4.2.2.1
This entry controls the addition and deletion of mscDpnGateFrAccessFrMuxSetupPvcSetup components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscDpnGateFrAccessFrMuxSetupPvcSetupRowStatusEntry

mscDpnGateFrAccessFrMuxSetupPvcSetupRowStatusEntry		1.3.6.1.4.1.562.36.2.1.61.4.2.2.1.1
A single entry in the table represents a single mscDpnGateFrAccessFrMuxSetupPvcSetup component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscDpnGateFrAccessFrMuxSetupPvcSetupRowStatusEntry

mscDpnGateFrAccessFrMuxSetupPvcSetupRowStatus		1.3.6.1.4.1.562.36.2.1.61.4.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscDpnGateFrAccessFrMuxSetupPvcSetup components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

mscDpnGateFrAccessFrMuxSetupPvcSetupComponentName		1.3.6.1.4.1.562.36.2.1.61.4.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscDpnGateFrAccessFrMuxSetupPvcSetupStorageType		1.3.6.1.4.1.562.36.2.1.61.4.2.2.1.1.4
This variable represents the storage type value for the mscDpnGateFrAccessFrMuxSetupPvcSetup tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscDpnGateFrAccessFrMuxSetupPvcSetupIndex		1.3.6.1.4.1.562.36.2.1.61.4.2.2.1.1.10
This variable represents the index for the mscDpnGateFrAccessFrMuxSetupPvcSetup tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

mscDpnGateFrAccessFrMuxSetupPvcSetupProvTable		1.3.6.1.4.1.562.36.2.1.61.4.2.2.10
This group contains provisionable attributes for setting up a Dlci associated with the application using the FrMuxSetup component. The Dlci is of the PVC type.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscDpnGateFrAccessFrMuxSetupPvcSetupProvEntry

mscDpnGateFrAccessFrMuxSetupPvcSetupProvEntry		1.3.6.1.4.1.562.36.2.1.61.4.2.2.10.1
An entry in the mscDpnGateFrAccessFrMuxSetupPvcSetupProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscDpnGateFrAccessFrMuxSetupPvcSetupProvEntry

mscDpnGateFrAccessFrMuxSetupPvcSetupDlciName		1.3.6.1.4.1.562.36.2.1.61.4.2.2.10.1.1
This attribute is the link to the Dlci which is associated with the application using the FrMuxSetup component.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Link

fraDpnTrunksGroup		1.3.6.1.4.1.562.36.2.2.68.1
OBJECT IDENTIFIER

fraDpnTrunksGroupCA		1.3.6.1.4.1.562.36.2.2.68.1.1
OBJECT IDENTIFIER

fraDpnTrunksGroupCA02		1.3.6.1.4.1.562.36.2.2.68.1.1.3
OBJECT IDENTIFIER

fraDpnTrunksGroupCA02A		1.3.6.1.4.1.562.36.2.2.68.1.1.3.2
OBJECT IDENTIFIER

fraDpnTrunksCapabilities		1.3.6.1.4.1.562.36.2.2.68.3
OBJECT IDENTIFIER

fraDpnTrunksCapabilitiesCA		1.3.6.1.4.1.562.36.2.2.68.3.1
OBJECT IDENTIFIER

fraDpnTrunksCapabilitiesCA02		1.3.6.1.4.1.562.36.2.2.68.3.1.3
OBJECT IDENTIFIER

fraDpnTrunksCapabilitiesCA02A		1.3.6.1.4.1.562.36.2.2.68.3.1.3.2
OBJECT IDENTIFIER

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor