Nortel-MsCarrier-MscPassport-FrTraceRcvrMIB

File: Nortel-MsCarrier-MscPassport-FrTraceRcvrMIB.mib (70269 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB Nortel-MsCarrier-MscPassport-TraceBaseMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs RowPointer
DisplayString StorageType RowStatus
Integer32 Unsigned32 AsciiString
Hex NonReplicated HexString
EnterpriseDateAndTime DigitString mscTraceIndex
mscTraceRcvr mscTraceSessionIndex mscTraceRcvrIndex
mscTraceSession

Defined Types

MscTraceRcvrFrRowStatusEntry  
SEQUENCE    
  mscTraceRcvrFrRowStatus RowStatus
  mscTraceRcvrFrComponentName DisplayString
  mscTraceRcvrFrStorageType StorageType
  mscTraceRcvrFrIndex NonReplicated

MscTraceRcvrFrDnaRowStatusEntry  
SEQUENCE    
  mscTraceRcvrFrDnaRowStatus RowStatus
  mscTraceRcvrFrDnaComponentName DisplayString
  mscTraceRcvrFrDnaStorageType StorageType
  mscTraceRcvrFrDnaIndex NonReplicated

MscTraceRcvrFrDnaAddressEntry  
SEQUENCE    
  mscTraceRcvrFrDnaNumberingPlanIndicator INTEGER
  mscTraceRcvrFrDnaDataNetworkAddress DigitString

MscTraceRcvrFrDnaOutgoingOptionsEntry  
SEQUENCE    
  mscTraceRcvrFrDnaOutCalls INTEGER
  mscTraceRcvrFrDnaOutDefaultPriority INTEGER
  mscTraceRcvrFrDnaOutIntl INTEGER
  mscTraceRcvrFrDnaOutDefaultPathReliability INTEGER
  mscTraceRcvrFrDnaOutPathReliabilityOverRide INTEGER
  mscTraceRcvrFrDnaOutPathReliabilitySignal INTEGER
  mscTraceRcvrFrDnaOutAccess INTEGER

MscTraceRcvrFrDnaIncomingOptionsEntry  
SEQUENCE    
  mscTraceRcvrFrDnaIncCalls INTEGER

MscTraceRcvrFrDnaCallOptionsEntry  
SEQUENCE    
  mscTraceRcvrFrDnaPacketSizes OCTET STRING
  mscTraceRcvrFrDnaDefaultRecvFrmNetworkPacketSize INTEGER
  mscTraceRcvrFrDnaDefaultSendToNetworkPacketSize INTEGER
  mscTraceRcvrFrDnaCugFormat INTEGER

MscTraceRcvrFrDnaCugRowStatusEntry  
SEQUENCE    
  mscTraceRcvrFrDnaCugRowStatus RowStatus
  mscTraceRcvrFrDnaCugComponentName DisplayString
  mscTraceRcvrFrDnaCugStorageType StorageType
  mscTraceRcvrFrDnaCugIndex Integer32

MscTraceRcvrFrDnaCugCugOptionsEntry  
SEQUENCE    
  mscTraceRcvrFrDnaCugType INTEGER
  mscTraceRcvrFrDnaCugDnic DigitString
  mscTraceRcvrFrDnaCugInterlockCode Unsigned32
  mscTraceRcvrFrDnaCugPreferential INTEGER
  mscTraceRcvrFrDnaCugOutCalls INTEGER
  mscTraceRcvrFrDnaCugIncCalls INTEGER
  mscTraceRcvrFrDnaCugPrivileged INTEGER

MscTraceRcvrFrDcRowStatusEntry  
SEQUENCE    
  mscTraceRcvrFrDcRowStatus RowStatus
  mscTraceRcvrFrDcComponentName DisplayString
  mscTraceRcvrFrDcStorageType StorageType
  mscTraceRcvrFrDcIndex NonReplicated

MscTraceRcvrFrDcOptionsEntry  
SEQUENCE    
  mscTraceRcvrFrDcRemoteNpi INTEGER
  mscTraceRcvrFrDcRemoteDna DigitString
  mscTraceRcvrFrDcType INTEGER
  mscTraceRcvrFrDcUserData HexString

MscTraceSessionFrRowStatusEntry  
SEQUENCE    
  mscTraceSessionFrRowStatus RowStatus
  mscTraceSessionFrComponentName DisplayString
  mscTraceSessionFrStorageType StorageType
  mscTraceSessionFrIndex NonReplicated

MscTraceSessionFrVcRowStatusEntry  
SEQUENCE    
  mscTraceSessionFrVcRowStatus RowStatus
  mscTraceSessionFrVcComponentName DisplayString
  mscTraceSessionFrVcStorageType StorageType
  mscTraceSessionFrVcIndex NonReplicated

MscTraceSessionFrVcCadEntry  
SEQUENCE    
  mscTraceSessionFrVcType INTEGER
  mscTraceSessionFrVcState INTEGER
  mscTraceSessionFrVcPreviousState INTEGER
  mscTraceSessionFrVcDiagnosticCode Unsigned32
  mscTraceSessionFrVcPreviousDiagnosticCode Unsigned32
  mscTraceSessionFrVcCalledNpi INTEGER
  mscTraceSessionFrVcCalledDna DigitString
  mscTraceSessionFrVcCalledLcn Unsigned32
  mscTraceSessionFrVcCallingNpi INTEGER
  mscTraceSessionFrVcCallingDna DigitString
  mscTraceSessionFrVcCallingLcn Unsigned32
  mscTraceSessionFrVcAccountingEnabled INTEGER
  mscTraceSessionFrVcFastSelectCall INTEGER
  mscTraceSessionFrVcPathReliability INTEGER
  mscTraceSessionFrVcAccountingEnd INTEGER
  mscTraceSessionFrVcPriority INTEGER
  mscTraceSessionFrVcSegmentSize Unsigned32
  mscTraceSessionFrVcMaxSubnetPktSize Unsigned32
  mscTraceSessionFrVcRcosToNetwork INTEGER
  mscTraceSessionFrVcRcosFromNetwork INTEGER
  mscTraceSessionFrVcEmissionPriorityToNetwork INTEGER
  mscTraceSessionFrVcEmissionPriorityFromNetwork INTEGER
  mscTraceSessionFrVcDataPath AsciiString

MscTraceSessionFrVcIntdEntry  
SEQUENCE    
  mscTraceSessionFrVcCallReferenceNumber Hex
  mscTraceSessionFrVcElapsedTimeTillNow Unsigned32
  mscTraceSessionFrVcSegmentsRx Unsigned32
  mscTraceSessionFrVcSegmentsSent Unsigned32
  mscTraceSessionFrVcStartTime EnterpriseDateAndTime
  mscTraceSessionFrVcCallReferenceNumberDecimal Unsigned32

MscTraceSessionFrVcFrdEntry  
SEQUENCE    
  mscTraceSessionFrVcFrmCongestedToSubnet Unsigned32
  mscTraceSessionFrVcCannotForwardToSubnet Unsigned32
  mscTraceSessionFrVcNotDataXferToSubnet Unsigned32
  mscTraceSessionFrVcOutOfRangeFrmFromSubnet Unsigned32
  mscTraceSessionFrVcCombErrorsFromSubnet Unsigned32
  mscTraceSessionFrVcDuplicatesFromSubnet Unsigned32
  mscTraceSessionFrVcNotDataXferFromSubnet Unsigned32
  mscTraceSessionFrVcFrmLossTimeouts Unsigned32
  mscTraceSessionFrVcOoSeqByteCntExceeded Unsigned32
  mscTraceSessionFrVcPeakOoSeqPktCount Unsigned32
  mscTraceSessionFrVcPeakOoSeqFrmForwarded Unsigned32
  mscTraceSessionFrVcSendSequenceNumber Unsigned32
  mscTraceSessionFrVcPktRetryTimeouts Unsigned32
  mscTraceSessionFrVcPeakRetryQueueSize Unsigned32
  mscTraceSessionFrVcSubnetRecoveries Unsigned32
  mscTraceSessionFrVcOoSeqPktCntExceeded Unsigned32
  mscTraceSessionFrVcPeakOoSeqByteCount Unsigned32

MscTraceSessionFrVcDmepEntry  
SEQUENCE    
  mscTraceSessionFrVcDmepValue RowPointer

Defined Values

frTraceRcvrMIB 1.3.6.1.4.1.562.36.2.2.139
OBJECT IDENTIFIER    

mscTraceRcvrFr 1.3.6.1.4.1.562.36.2.1.106.2.3
OBJECT IDENTIFIER    

mscTraceRcvrFrRowStatusTable 1.3.6.1.4.1.562.36.2.1.106.2.3.1
This entry controls the addition and deletion of mscTraceRcvrFr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTraceRcvrFrRowStatusEntry

mscTraceRcvrFrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.106.2.3.1.1
A single entry in the table represents a single mscTraceRcvrFr component.
OBJECT-TYPE    
  MscTraceRcvrFrRowStatusEntry  

mscTraceRcvrFrRowStatus 1.3.6.1.4.1.562.36.2.1.106.2.3.1.1.1
This variable is used as the basis for SNMP naming of mscTraceRcvrFr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscTraceRcvrFrComponentName 1.3.6.1.4.1.562.36.2.1.106.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscTraceRcvrFrStorageType 1.3.6.1.4.1.562.36.2.1.106.2.3.1.1.4
This variable represents the storage type value for the mscTraceRcvrFr tables.
OBJECT-TYPE    
  StorageType  

mscTraceRcvrFrIndex 1.3.6.1.4.1.562.36.2.1.106.2.3.1.1.10
This variable represents the index for the mscTraceRcvrFr tables.
OBJECT-TYPE    
  NonReplicated  

mscTraceRcvrFrDna 1.3.6.1.4.1.562.36.2.1.106.2.3.2
OBJECT IDENTIFIER    

mscTraceRcvrFrDnaRowStatusTable 1.3.6.1.4.1.562.36.2.1.106.2.3.2.1
This entry controls the addition and deletion of mscTraceRcvrFrDna components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTraceRcvrFrDnaRowStatusEntry

mscTraceRcvrFrDnaRowStatusEntry 1.3.6.1.4.1.562.36.2.1.106.2.3.2.1.1
A single entry in the table represents a single mscTraceRcvrFrDna component.
OBJECT-TYPE    
  MscTraceRcvrFrDnaRowStatusEntry  

mscTraceRcvrFrDnaRowStatus 1.3.6.1.4.1.562.36.2.1.106.2.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscTraceRcvrFrDna components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscTraceRcvrFrDnaComponentName 1.3.6.1.4.1.562.36.2.1.106.2.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscTraceRcvrFrDnaStorageType 1.3.6.1.4.1.562.36.2.1.106.2.3.2.1.1.4
This variable represents the storage type value for the mscTraceRcvrFrDna tables.
OBJECT-TYPE    
  StorageType  

mscTraceRcvrFrDnaIndex 1.3.6.1.4.1.562.36.2.1.106.2.3.2.1.1.10
This variable represents the index for the mscTraceRcvrFrDna tables.
OBJECT-TYPE    
  NonReplicated  

mscTraceRcvrFrDnaAddressTable 1.3.6.1.4.1.562.36.2.1.106.2.3.2.10
This group contains attributes common to all Dnas. This group is composed of two attributes which define a Dna. These attributes are used to interpret the format of the address digits.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTraceRcvrFrDnaAddressEntry

mscTraceRcvrFrDnaAddressEntry 1.3.6.1.4.1.562.36.2.1.106.2.3.2.10.1
An entry in the mscTraceRcvrFrDnaAddressTable.
OBJECT-TYPE    
  MscTraceRcvrFrDnaAddressEntry  

mscTraceRcvrFrDnaNumberingPlanIndicator 1.3.6.1.4.1.562.36.2.1.106.2.3.2.10.1.1
This attribute specifies the Numbering Plan Indicator (NPI) of the Dna that is entered. The address may belong to an E.164 or X.121 plan.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscTraceRcvrFrDnaDataNetworkAddress 1.3.6.1.4.1.562.36.2.1.106.2.3.2.10.1.2
The Dna attribute contains digits which form a unique identifier for the calling end of the trace connection. Dna digits are selected and assigned by network operators. The maximum Dna length is 15 digits.
OBJECT-TYPE    
  DigitString Size(1..15)  

mscTraceRcvrFrDnaOutgoingOptionsTable 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11
This group defines the call options for outgoing calls.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTraceRcvrFrDnaOutgoingOptionsEntry

mscTraceRcvrFrDnaOutgoingOptionsEntry 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1
An entry in the mscTraceRcvrFrDnaOutgoingOptionsTable.
OBJECT-TYPE    
  MscTraceRcvrFrDnaOutgoingOptionsEntry  

mscTraceRcvrFrDnaOutCalls 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.1
This attribute specifies that outgoing calls (from the DTE to the network) can be made using this particular Dna component.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

mscTraceRcvrFrDnaOutDefaultPriority 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.7
If this attribute is set to normal, then the default priority for outgoing calls (from the DTE to the network) using this particular Dna is normal priority when the priority is not specified in the call. If this attribute is set to high then the default priority for outgoing calls using this particular Dna is high priority.
OBJECT-TYPE    
  INTEGER normal(0), high(1)  

mscTraceRcvrFrDnaOutIntl 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.8
This attribute specifies that outgoing international calls (from the DTE to the network) can be made using this particular Dna. This attribute also controls access to another numbering plan, and specifies that cross-numbering plan calls are allowed.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

mscTraceRcvrFrDnaOutDefaultPathReliability 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.14
This attribute specifies the default reliability class of routing for all calls (from the DTE to the network) using this particular Dna. The chosen default reliability class of routing normally applies to all packets (including the call packets) travelling into the network. A value of high specifies that packets are to be overflowed or retransmitted at various routing levels. Typically high reliability results in duplication and disordering of packets in the network, when errors are detected or during link congestion. The VC handles the duplication and disordering to ensure that packets are delivered to the interface in the proper sequence and without duplication.
OBJECT-TYPE    
  INTEGER high(0), normal(1)  

mscTraceRcvrFrDnaOutPathReliabilityOverRide 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.15
This attribute specifies that the called end of the connection will not use the calling end provisioning data for reliability class of routing to override the provisioning data at the called end.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscTraceRcvrFrDnaOutPathReliabilitySignal 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.16
This attribute specifies that reliability routing signaling is not used.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

mscTraceRcvrFrDnaOutAccess 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.17
This attribute is an extension of the Closed User Group (CUG) facility. If this attribute is set to a value of allowed, it specifies that outgoing calls (from the DTE to the network) to the open (non- CUG) part of the network are permitted. It also permits outgoing calls to interfaces that have Incoming Access capabilities. If set to a value of disallowed, then such calls cannot be made using this Dna (the calls will be cleared by the local DCE). This attribute corresponds to the ITU-T 'Closed User Group with Outgoing Access' feature.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

mscTraceRcvrFrDnaIncomingOptionsTable 1.3.6.1.4.1.562.36.2.1.106.2.3.2.12
This group defines the call options for incoming calls.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTraceRcvrFrDnaIncomingOptionsEntry

mscTraceRcvrFrDnaIncomingOptionsEntry 1.3.6.1.4.1.562.36.2.1.106.2.3.2.12.1
An entry in the mscTraceRcvrFrDnaIncomingOptionsTable.
OBJECT-TYPE    
  MscTraceRcvrFrDnaIncomingOptionsEntry  

mscTraceRcvrFrDnaIncCalls 1.3.6.1.4.1.562.36.2.1.106.2.3.2.12.1.1
This attribute specifies that incoming calls (from the network to the DTE) cannot be made to this Dna.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

mscTraceRcvrFrDnaCallOptionsTable 1.3.6.1.4.1.562.36.2.1.106.2.3.2.13
The CallOptions group defines additional options for calls which are not specific to the direction of the call.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTraceRcvrFrDnaCallOptionsEntry

mscTraceRcvrFrDnaCallOptionsEntry 1.3.6.1.4.1.562.36.2.1.106.2.3.2.13.1
An entry in the mscTraceRcvrFrDnaCallOptionsTable.
OBJECT-TYPE    
  MscTraceRcvrFrDnaCallOptionsEntry  

mscTraceRcvrFrDnaPacketSizes 1.3.6.1.4.1.562.36.2.1.106.2.3.2.13.1.2
This attribute specifies the allowable packet sizes supported for calls using this Dna. Description of bits: n16(0) n32(1) n64(2) n128(3) n256(4) n512(5) n1024(6) n2048(7) n4096(8)
OBJECT-TYPE    
  OCTET STRING Size(2)  

mscTraceRcvrFrDnaDefaultRecvFrmNetworkPacketSize 1.3.6.1.4.1.562.36.2.1.106.2.3.2.13.1.3
This attribute specifies the default local receive packet size from network to DTE for calls using this particular Dna.
OBJECT-TYPE    
  INTEGER n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

mscTraceRcvrFrDnaDefaultSendToNetworkPacketSize 1.3.6.1.4.1.562.36.2.1.106.2.3.2.13.1.4
This attribute specifies the default local send packet size from DTE to network for all calls using this particular Dna.
OBJECT-TYPE    
  INTEGER n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

mscTraceRcvrFrDnaCugFormat 1.3.6.1.4.1.562.36.2.1.106.2.3.2.13.1.10
This attribute specifies the format to signal CUG indices as basic or extended. A basic CUG index format is two digits long. An extended CUG index format is four digits long.
OBJECT-TYPE    
  INTEGER basic(0), extended(1)  

mscTraceRcvrFrDnaCug 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2
OBJECT IDENTIFIER    

mscTraceRcvrFrDnaCugRowStatusTable 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.1
This entry controls the addition and deletion of mscTraceRcvrFrDnaCug components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTraceRcvrFrDnaCugRowStatusEntry

mscTraceRcvrFrDnaCugRowStatusEntry 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.1.1
A single entry in the table represents a single mscTraceRcvrFrDnaCug component.
OBJECT-TYPE    
  MscTraceRcvrFrDnaCugRowStatusEntry  

mscTraceRcvrFrDnaCugRowStatus 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscTraceRcvrFrDnaCug components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscTraceRcvrFrDnaCugComponentName 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscTraceRcvrFrDnaCugStorageType 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.1.1.4
This variable represents the storage type value for the mscTraceRcvrFrDnaCug tables.
OBJECT-TYPE    
  StorageType  

mscTraceRcvrFrDnaCugIndex 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.1.1.10
This variable represents the index for the mscTraceRcvrFrDnaCug tables.
OBJECT-TYPE    
  Integer32 1..1  

mscTraceRcvrFrDnaCugCugOptionsTable 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10
Attributes in this group define ClosedUserGroup options associated with interlockCode. Dnas with the same CUG (interlockCode) can make calls within this group. Various combinations of attributes are defined under this option which permit or prevent calls in the same CUG group.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTraceRcvrFrDnaCugCugOptionsEntry

mscTraceRcvrFrDnaCugCugOptionsEntry 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10.1
An entry in the mscTraceRcvrFrDnaCugCugOptionsTable.
OBJECT-TYPE    
  MscTraceRcvrFrDnaCugCugOptionsEntry  

mscTraceRcvrFrDnaCugType 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10.1.1
This attribute specifies the CUG type as either national or international. A national CUG has significance within the local network only. An international CUG has significance across network boundaries.
OBJECT-TYPE    
  INTEGER national(0), international(1)  

mscTraceRcvrFrDnaCugDnic 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10.1.2
This attribute specifies the Data Network ID Code of the network that is administering the international CUG. This attribute is not used for a national CUG and should be left at its default value. The dnic value is not an arbitrary number. It is assigned by international agreement and controlled by ITU-T.
OBJECT-TYPE    
  DigitString Size(4)  

mscTraceRcvrFrDnaCugInterlockCode 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10.1.3
This attribute specifies a numeric identifier of a national or international closed user group. It is an arbitrary number. This attribute may also be called CUG in some descriptions. Dnas defined with this number can only make calls to Dnas defined with the same interlockCode.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscTraceRcvrFrDnaCugPreferential 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10.1.4
This attribute specifies that this Cug is to be used on all outgoing calls to the Frame Relay trace receiver.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscTraceRcvrFrDnaCugOutCalls 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10.1.5
This attribute specifies that outgoing calls (from the DTE into the network) can be made using this particular Cug.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

mscTraceRcvrFrDnaCugIncCalls 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10.1.6
This attribute specifies that incoming calls (from the network to the DTE) cannot be accepted using this Cug.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

mscTraceRcvrFrDnaCugPrivileged 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10.1.7
This attribute specifies that this Cug is privileged. For a call between two closed user group Dnas to connect, at least one Dna must have a privileged Cug.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscTraceRcvrFrDc 1.3.6.1.4.1.562.36.2.1.106.2.3.3
OBJECT IDENTIFIER    

mscTraceRcvrFrDcRowStatusTable 1.3.6.1.4.1.562.36.2.1.106.2.3.3.1
This entry controls the addition and deletion of mscTraceRcvrFrDc components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTraceRcvrFrDcRowStatusEntry

mscTraceRcvrFrDcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.106.2.3.3.1.1
A single entry in the table represents a single mscTraceRcvrFrDc component.
OBJECT-TYPE    
  MscTraceRcvrFrDcRowStatusEntry  

mscTraceRcvrFrDcRowStatus 1.3.6.1.4.1.562.36.2.1.106.2.3.3.1.1.1
This variable is used as the basis for SNMP naming of mscTraceRcvrFrDc components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscTraceRcvrFrDcComponentName 1.3.6.1.4.1.562.36.2.1.106.2.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscTraceRcvrFrDcStorageType 1.3.6.1.4.1.562.36.2.1.106.2.3.3.1.1.4
This variable represents the storage type value for the mscTraceRcvrFrDc tables.
OBJECT-TYPE    
  StorageType  

mscTraceRcvrFrDcIndex 1.3.6.1.4.1.562.36.2.1.106.2.3.3.1.1.10
This variable represents the index for the mscTraceRcvrFrDc tables.
OBJECT-TYPE    
  NonReplicated  

mscTraceRcvrFrDcOptionsTable 1.3.6.1.4.1.562.36.2.1.106.2.3.3.10
The Options group defines attributes associated with the SVC direct call.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTraceRcvrFrDcOptionsEntry

mscTraceRcvrFrDcOptionsEntry 1.3.6.1.4.1.562.36.2.1.106.2.3.3.10.1
An entry in the mscTraceRcvrFrDcOptionsTable.
OBJECT-TYPE    
  MscTraceRcvrFrDcOptionsEntry  

mscTraceRcvrFrDcRemoteNpi 1.3.6.1.4.1.562.36.2.1.106.2.3.3.10.1.3
This attribute indicates the numbering plan used for the remoteDna.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscTraceRcvrFrDcRemoteDna 1.3.6.1.4.1.562.36.2.1.106.2.3.3.10.1.4
This attribute specifies the Data Network Address of the remote end of the connection. This is the DNA of the Frame Relay trace receiver which will receive the trace data.
OBJECT-TYPE    
  DigitString Size(1..15)  

mscTraceRcvrFrDcType 1.3.6.1.4.1.562.36.2.1.106.2.3.3.10.1.6
This attribute specifies the type of call as switched. For a switched call, no information is defined at the remote end about the local end of the connection.
OBJECT-TYPE    
  INTEGER switched(0), permanentMaster(1), permanentSlave(2), permanentBackupSlave(3)  

mscTraceRcvrFrDcUserData 1.3.6.1.4.1.562.36.2.1.106.2.3.3.10.1.8
This attribute contains the user data. It is a 0 to 16 byte length string which is appended to the call request packet that is presented to the called (destination) DTE.
OBJECT-TYPE    
  HexString Size(0..16)  

mscTraceSessionFr 1.3.6.1.4.1.562.36.2.1.106.3.3
OBJECT IDENTIFIER    

mscTraceSessionFrRowStatusTable 1.3.6.1.4.1.562.36.2.1.106.3.3.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscTraceSessionFr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTraceSessionFrRowStatusEntry

mscTraceSessionFrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.106.3.3.1.1
A single entry in the table represents a single mscTraceSessionFr component.
OBJECT-TYPE    
  MscTraceSessionFrRowStatusEntry  

mscTraceSessionFrRowStatus 1.3.6.1.4.1.562.36.2.1.106.3.3.1.1.1
This variable is used as the basis for SNMP naming of mscTraceSessionFr components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscTraceSessionFrComponentName 1.3.6.1.4.1.562.36.2.1.106.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscTraceSessionFrStorageType 1.3.6.1.4.1.562.36.2.1.106.3.3.1.1.4
This variable represents the storage type value for the mscTraceSessionFr tables.
OBJECT-TYPE    
  StorageType  

mscTraceSessionFrIndex 1.3.6.1.4.1.562.36.2.1.106.3.3.1.1.10
This variable represents the index for the mscTraceSessionFr tables.
OBJECT-TYPE    
  NonReplicated  

mscTraceSessionFrVc 1.3.6.1.4.1.562.36.2.1.106.3.3.2
OBJECT IDENTIFIER    

mscTraceSessionFrVcRowStatusTable 1.3.6.1.4.1.562.36.2.1.106.3.3.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscTraceSessionFrVc components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTraceSessionFrVcRowStatusEntry

mscTraceSessionFrVcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.106.3.3.2.1.1
A single entry in the table represents a single mscTraceSessionFrVc component.
OBJECT-TYPE    
  MscTraceSessionFrVcRowStatusEntry  

mscTraceSessionFrVcRowStatus 1.3.6.1.4.1.562.36.2.1.106.3.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscTraceSessionFrVc components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscTraceSessionFrVcComponentName 1.3.6.1.4.1.562.36.2.1.106.3.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscTraceSessionFrVcStorageType 1.3.6.1.4.1.562.36.2.1.106.3.3.2.1.1.4
This variable represents the storage type value for the mscTraceSessionFrVc tables.
OBJECT-TYPE    
  StorageType  

mscTraceSessionFrVcIndex 1.3.6.1.4.1.562.36.2.1.106.3.3.2.1.1.10
This variable represents the index for the mscTraceSessionFrVc tables.
OBJECT-TYPE    
  NonReplicated  

mscTraceSessionFrVcCadTable 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTraceSessionFrVcCadEntry

mscTraceSessionFrVcCadEntry 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1
An entry in the mscTraceSessionFrVcCadTable.
OBJECT-TYPE    
  MscTraceSessionFrVcCadEntry  

mscTraceSessionFrVcType 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.1
This attribute displays the type of call, pvc,svc,spvc or frf10spvc.
OBJECT-TYPE    
  INTEGER svc(0), pvc(1), spvc(2), frf10spvc(3)  

mscTraceSessionFrVcState 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.2
This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4.
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

mscTraceSessionFrVcPreviousState 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.3
This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing.
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

mscTraceSessionFrVcDiagnosticCode 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.4
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
OBJECT-TYPE    
  Unsigned32 0..255  

mscTraceSessionFrVcPreviousDiagnosticCode 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.5
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
OBJECT-TYPE    
  Unsigned32 0..255  

mscTraceSessionFrVcCalledNpi 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.6
This attribute displays the Numbering Plan Indicator (NPI) of the called end.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscTraceSessionFrVcCalledDna 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.7
This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection.
OBJECT-TYPE    
  DigitString Size(1..15)  

mscTraceSessionFrVcCalledLcn 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.8
This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscTraceSessionFrVcCallingNpi 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.9
This attribute displays the Numbering Plan Indicator (NPI) of the calling end.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscTraceSessionFrVcCallingDna 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.10
This attribute displays the Data Network Address (Dna) of the calling end.
OBJECT-TYPE    
  DigitString Size(1..15)  

mscTraceSessionFrVcCallingLcn 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.11
This attribute displays the Logical Channel Number of the calling end.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscTraceSessionFrVcAccountingEnabled 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.12
This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options.
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

mscTraceSessionFrVcFastSelectCall 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.13
This attribute displays that this is a fast select call.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscTraceSessionFrVcPathReliability 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.19
This attribute displays the path reliability.
OBJECT-TYPE    
  INTEGER high(0), normal(1)  

mscTraceSessionFrVcAccountingEnd 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.20
This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record.
OBJECT-TYPE    
  INTEGER callingEnd(0), calledEnd(1)  

mscTraceSessionFrVcPriority 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.21
This attribute displays whether the call is a normal or a high priority call.
OBJECT-TYPE    
  INTEGER normal(0), high(1)  

mscTraceSessionFrVcSegmentSize 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.22
This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received.
OBJECT-TYPE    
  Unsigned32 0..4096  

mscTraceSessionFrVcMaxSubnetPktSize 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.27
This attribute indicates the maximum packet size allowed on the Vc.
OBJECT-TYPE    
  Unsigned32 0..4096  

mscTraceSessionFrVcRcosToNetwork 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.28
This attribute indicates the routing metric routing class of service to the network.
OBJECT-TYPE    
  INTEGER throughput(0), delay(1), multimedia(2)  

mscTraceSessionFrVcRcosFromNetwork 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.29
This attribute displays the routing metric Routing Class of Service from the Network.
OBJECT-TYPE    
  INTEGER throughput(0), delay(1), multimedia(2)  

mscTraceSessionFrVcEmissionPriorityToNetwork 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.30
This attribute displays the network internal emission priotity to the network.
OBJECT-TYPE    
  INTEGER normal(0), high(1), interrupting(2)  

mscTraceSessionFrVcEmissionPriorityFromNetwork 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.31
This attribute displays the network internal emission priotity from the network.
OBJECT-TYPE    
  INTEGER normal(0), high(1), interrupting(2)  

mscTraceSessionFrVcDataPath 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.32
This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attribute can be different from the provisioned value. If the connection is using dprsOnly data path, the string dprsOnly is displayed. (dynamic packet routing system) If the connection is using dprsMcsOnly data path, the string dprsMcsOnly is displayed. If the connection is using dprsMcsFirst data path, the string dprsMcsFirst is displayed.
OBJECT-TYPE    
  AsciiString Size(0..32)  

mscTraceSessionFrVcIntdTable 1.3.6.1.4.1.562.36.2.1.106.3.3.2.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTraceSessionFrVcIntdEntry

mscTraceSessionFrVcIntdEntry 1.3.6.1.4.1.562.36.2.1.106.3.3.2.11.1
An entry in the mscTraceSessionFrVcIntdTable.
OBJECT-TYPE    
  MscTraceSessionFrVcIntdEntry  

mscTraceSessionFrVcCallReferenceNumber 1.3.6.1.4.1.562.36.2.1.106.3.3.2.11.1.1
This attribute is obsolete. It is replaced by the callReferenceNumber attribute to display the call reference number in decimal. The SNMP reference for the callReferenceNumber attribute is callReferenceNumberDecimal.
OBJECT-TYPE    
  Hex 0..16777215  

mscTraceSessionFrVcElapsedTimeTillNow 1.3.6.1.4.1.562.36.2.1.106.3.3.2.11.1.2
This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started.
OBJECT-TYPE    
  Unsigned32 0..16777215  

mscTraceSessionFrVcSegmentsRx 1.3.6.1.4.1.562.36.2.1.106.3.3.2.11.1.3
This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state.
OBJECT-TYPE    
  Unsigned32 0..16777215  

mscTraceSessionFrVcSegmentsSent 1.3.6.1.4.1.562.36.2.1.106.3.3.2.11.1.4
This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet.
OBJECT-TYPE    
  Unsigned32 0..16777215  

mscTraceSessionFrVcStartTime 1.3.6.1.4.1.562.36.2.1.106.3.3.2.11.1.5
This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes.
OBJECT-TYPE    
  EnterpriseDateAndTime Size(0|19)  

mscTraceSessionFrVcCallReferenceNumberDecimal 1.3.6.1.4.1.562.36.2.1.106.3.3.2.11.1.7
This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscTraceSessionFrVcFrdTable 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods. Frame Relay Vc uses a best effort data packet delivery protocol and a different packet segmentation and combination methods from the General Vc. The Frame Relay Vc uses the same call setup and control mechanism (e.g. the support of non-flow control data packets) as in a General Vc. Most General Vc statistics and internal variables are used in a Frame Relay Vc and are displayed by software developers
OBJECT-TYPE    
  SEQUENCE OF  
    MscTraceSessionFrVcFrdEntry

mscTraceSessionFrVcFrdEntry 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1
An entry in the mscTraceSessionFrVcFrdTable.
OBJECT-TYPE    
  MscTraceSessionFrVcFrdEntry  

mscTraceSessionFrVcFrmCongestedToSubnet 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.2
This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be discarded. The discard reasons include insufficient memory for splitting the frame into smaller subnet packet size.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscTraceSessionFrVcCannotForwardToSubnet 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.3
This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link discarded due to failure in forwarding a packet from Vc into the subnet.- This attribute is increased when packet forwarding fails to forward a packet into the subnet. If a frame is split into multiple subnet packets and a partial packet has to be discarded, all subsequent partial packets that have not yet been delivered to the subnet will be discarded as well.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscTraceSessionFrVcNotDataXferToSubnet 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.4
This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscTraceSessionFrVcOutOfRangeFrmFromSubnet 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.5
This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscTraceSessionFrVcCombErrorsFromSubnet 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.6
This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs when the subnet discards packets and thus this statistics can be used to guest the number of subnet packets that are not delivered to the Vc. It cannot be used as an actual measure because some subnet packets may have been delivered to Vc but have to be discarded because these are partial packets to a frame in which some other partial packets have not been properly delivered to Vc
OBJECT-TYPE    
  Unsigned32 0..5000  

mscTraceSessionFrVcDuplicatesFromSubnet 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.7
This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible for the subnet to retransmit packets. When packets are out-of-sequenced and copies of the same packets arrive, then this attribute is increased.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscTraceSessionFrVcNotDataXferFromSubnet 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.8
This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscTraceSessionFrVcFrmLossTimeouts 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.9
This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in the subnet.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscTraceSessionFrVcOoSeqByteCntExceeded 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.10
This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscTraceSessionFrVcPeakOoSeqPktCount 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.11
This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscTraceSessionFrVcPeakOoSeqFrmForwarded 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.12
This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued in an out-of-sequenced queue, waiting for a packet with the expected sequence number to come. When that packet arrives, this attribute records the maximum number of packets that were out-of-sequenced, but now have become in-sequenced. The statistics is used to measure expected queue size due to normal subnet packet disorder (not due to subnet packet discard). Current implementation also uses this statistics to set a maximum size for the out-of-sequenced queue.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscTraceSessionFrVcSendSequenceNumber 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.13
This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscTraceSessionFrVcPktRetryTimeouts 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.15
This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have been discarded in the subnet.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscTraceSessionFrVcPeakRetryQueueSize 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.16
This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records the largest body of unacknowledged packets.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscTraceSessionFrVcSubnetRecoveries 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.17
This attribute displays the number of successful Vc recovery attempts.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscTraceSessionFrVcOoSeqPktCntExceeded 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.19
This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count.
OBJECT-TYPE    
  Unsigned32 0..255  

mscTraceSessionFrVcPeakOoSeqByteCount 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.20
This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc.
OBJECT-TYPE    
  Unsigned32 0..50000  

mscTraceSessionFrVcDmepTable 1.3.6.1.4.1.562.36.2.1.106.3.3.2.417
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly data path, this attribute is empty. If the connection is using dprsMcsOnly or dprsMcsFirst data path, this attribute displays component name of the dprsMcsEndPoint.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTraceSessionFrVcDmepEntry

mscTraceSessionFrVcDmepEntry 1.3.6.1.4.1.562.36.2.1.106.3.3.2.417.1
An entry in the mscTraceSessionFrVcDmepTable.
OBJECT-TYPE    
  MscTraceSessionFrVcDmepEntry  

mscTraceSessionFrVcDmepValue 1.3.6.1.4.1.562.36.2.1.106.3.3.2.417.1.1
This variable represents both the value and the index for the mscTraceSessionFrVcDmepTable.
OBJECT-TYPE    
  RowPointer  

frTraceRcvrGroup 1.3.6.1.4.1.562.36.2.2.139.1
OBJECT IDENTIFIER    

frTraceRcvrGroupCA 1.3.6.1.4.1.562.36.2.2.139.1.1
OBJECT IDENTIFIER    

frTraceRcvrGroupCA02 1.3.6.1.4.1.562.36.2.2.139.1.1.3
OBJECT IDENTIFIER    

frTraceRcvrGroupCA02A 1.3.6.1.4.1.562.36.2.2.139.1.1.3.2
OBJECT IDENTIFIER    

frTraceRcvrCapabilities 1.3.6.1.4.1.562.36.2.2.139.3
OBJECT IDENTIFIER    

frTraceRcvrCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.139.3.1
OBJECT IDENTIFIER    

frTraceRcvrCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.139.3.1.3
OBJECT IDENTIFIER    

frTraceRcvrCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.139.3.1.3.2
OBJECT IDENTIFIER