Nortel-MsCarrier-MscPassport-BaseShelfMIB

File: Nortel-MsCarrier-MscPassport-BaseShelfMIB.mib (121550 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs mscComponents
RowPointer DisplayString StorageType
RowStatus Gauge32 Integer32
Unsigned32 AsciiString Hex
NonReplicated Link ExtendedAsciiString

Defined Types

MscShelfRowStatusEntry  
SEQUENCE    
  mscShelfRowStatus RowStatus
  mscShelfComponentName DisplayString
  mscShelfStorageType StorageType
  mscShelfIndex NonReplicated

MscShelfProvEntry  
SEQUENCE    
  mscShelfCommentText AsciiString

MscShelfOperEntry  
SEQUENCE    
  mscShelfBusOperatingMode INTEGER
  mscShelfHardwareFailures OCTET STRING
  mscShelfNumberOfSlots Unsigned32
  mscShelfShelfType INTEGER
  mscShelfBackplaneOperatingMode INTEGER

MscShelfCardRowStatusEntry  
SEQUENCE    
  mscShelfCardRowStatus RowStatus
  mscShelfCardComponentName DisplayString
  mscShelfCardStorageType StorageType
  mscShelfCardIndex Integer32

MscShelfCardProvEntry  
SEQUENCE    
  mscShelfCardCardType INTEGER
  mscShelfCardSparingConnection INTEGER
  mscShelfCardCommentText AsciiString

MscShelfCardStateEntry  
SEQUENCE    
  mscShelfCardAdminState INTEGER
  mscShelfCardOperationalState INTEGER
  mscShelfCardUsageState INTEGER
  mscShelfCardAvailabilityStatus OCTET STRING
  mscShelfCardProceduralStatus OCTET STRING
  mscShelfCardControlStatus OCTET STRING
  mscShelfCardAlarmStatus OCTET STRING
  mscShelfCardStandbyStatus INTEGER
  mscShelfCardUnknownStatus INTEGER

MscShelfCardOperEntry  
SEQUENCE    
  mscShelfCardCurrentLP RowPointer
  mscShelfCardFailureCause INTEGER
  mscShelfCardSelfTestFault INTEGER
  mscShelfCardSparingConnectionStatus INTEGER
  mscShelfCardHardwareAlarm INTEGER

MscShelfCardPropEntry  
SEQUENCE    
  mscShelfCardInsertedCardType INTEGER
  mscShelfCardPmRevisionCode AsciiString
  mscShelfCardImRevisionCode AsciiString
  mscShelfCardSerialNumber AsciiString
  mscShelfCardActiveFirmwareVersion AsciiString
  mscShelfCardInactiveFirmwareVersion AsciiString
  mscShelfCardProductCode AsciiString

MscShelfCardUtilEntry  
SEQUENCE    
  mscShelfCardTimeInterval Unsigned32
  mscShelfCardCpuUtil Gauge32
  mscShelfCardCpuUtilAvg Gauge32
  mscShelfCardCpuUtilAvgMin Gauge32
  mscShelfCardCpuUtilAvgMax Gauge32
  mscShelfCardMsgBlockUsage Gauge32
  mscShelfCardMsgBlockUsageAvg Gauge32
  mscShelfCardMsgBlockUsageAvgMin Gauge32
  mscShelfCardMsgBlockUsageAvgMax Gauge32
  mscShelfCardLocalMsgBlockUsage Gauge32
  mscShelfCardLocalMsgBlockUsageAvg Gauge32
  mscShelfCardLocalMsgBlockUsageMin Gauge32
  mscShelfCardLocalMsgBlockUsageMax Gauge32

MscShelfCardCapEntry  
SEQUENCE    
  mscShelfCardMsgBlockCapacity Unsigned32
  mscShelfCardLocalMsgBlockCapacity Unsigned32

MscShelfCardConfiguredLPsEntry  
SEQUENCE    
  mscShelfCardConfiguredLPsValue Link

MscShelfCardMemoryCapacityEntry  
SEQUENCE    
  mscShelfCardMemoryCapacityIndex INTEGER
  mscShelfCardMemoryCapacityValue Unsigned32

MscShelfCardMemoryUsageEntry  
SEQUENCE    
  mscShelfCardMemoryUsageIndex INTEGER
  mscShelfCardMemoryUsageValue Gauge32

MscShelfCardMemoryUsageAvgEntry  
SEQUENCE    
  mscShelfCardMemoryUsageAvgIndex INTEGER
  mscShelfCardMemoryUsageAvgValue Gauge32

MscShelfCardMemoryUsageAvgMinEntry  
SEQUENCE    
  mscShelfCardMemoryUsageAvgMinIndex INTEGER
  mscShelfCardMemoryUsageAvgMinValue Gauge32

MscShelfCardMemoryUsageAvgMaxEntry  
SEQUENCE    
  mscShelfCardMemoryUsageAvgMaxIndex INTEGER
  mscShelfCardMemoryUsageAvgMaxValue Gauge32

MscShelfCardCurrentLpEntry  
SEQUENCE    
  mscShelfCardCurrentLpValue RowPointer

MscShelfCardTestRowStatusEntry  
SEQUENCE    
  mscShelfCardTestRowStatus RowStatus
  mscShelfCardTestComponentName DisplayString
  mscShelfCardTestStorageType StorageType
  mscShelfCardTestIndex NonReplicated

MscShelfCardTestStateEntry  
SEQUENCE    
  mscShelfCardTestAdminState INTEGER
  mscShelfCardTestOperationalState INTEGER
  mscShelfCardTestUsageState INTEGER

MscShelfCardTestSetupEntry  
SEQUENCE    
  mscShelfCardTestTargetCard Unsigned32
  mscShelfCardTestFrmTypes OCTET STRING
  mscShelfCardTestFrmPriorities OCTET STRING
  mscShelfCardTestFrmPatternType INTEGER
  mscShelfCardTestCustomizedPattern Hex
  mscShelfCardTestDuration Unsigned32

MscShelfCardTestResultsEntry  
SEQUENCE    
  mscShelfCardTestElapsedTime Unsigned32
  mscShelfCardTestTimeRemaining Unsigned32
  mscShelfCardTestCauseOfTermination INTEGER

MscShelfCardTestSizeEntry  
SEQUENCE    
  mscShelfCardTestSizeIndex INTEGER
  mscShelfCardTestSizeValue Unsigned32

MscShelfCardTestLoadingFrmDataEntry  
SEQUENCE    
  mscShelfCardTestLoadingFrmDataResultsIndex INTEGER
  mscShelfCardTestLoadingFrmDataPriorityIndex INTEGER
  mscShelfCardTestLoadingFrmDataValue Unsigned32

MscShelfCardTestVerificationFrmDataEntry  
SEQUENCE    
  mscShelfCardTestVerificationFrmDataResultsIndex INTEGER
  mscShelfCardTestVerificationFrmDataPriorityIndex INTEGER
  mscShelfCardTestVerificationFrmDataValue Unsigned32

MscShelfCardDiagRowStatusEntry  
SEQUENCE    
  mscShelfCardDiagRowStatus RowStatus
  mscShelfCardDiagComponentName DisplayString
  mscShelfCardDiagStorageType StorageType
  mscShelfCardDiagIndex NonReplicated

MscShelfCardDiagTrapDataRowStatusEntry  
SEQUENCE    
  mscShelfCardDiagTrapDataRowStatus RowStatus
  mscShelfCardDiagTrapDataComponentName DisplayString
  mscShelfCardDiagTrapDataStorageType StorageType
  mscShelfCardDiagTrapDataIndex NonReplicated

MscShelfCardDiagTrapDataLineRowStatusEntry  
SEQUENCE    
  mscShelfCardDiagTrapDataLineRowStatus RowStatus
  mscShelfCardDiagTrapDataLineComponentName DisplayString
  mscShelfCardDiagTrapDataLineStorageType StorageType
  mscShelfCardDiagTrapDataLineIndex Integer32

MscShelfCardDiagTrapDataLineOperEntry  
SEQUENCE    
  mscShelfCardDiagTrapDataLineData ExtendedAsciiString

MscShelfCardDiagRecErrRowStatusEntry  
SEQUENCE    
  mscShelfCardDiagRecErrRowStatus RowStatus
  mscShelfCardDiagRecErrComponentName DisplayString
  mscShelfCardDiagRecErrStorageType StorageType
  mscShelfCardDiagRecErrIndex NonReplicated

MscShelfCardDiagRecErrLineRowStatusEntry  
SEQUENCE    
  mscShelfCardDiagRecErrLineRowStatus RowStatus
  mscShelfCardDiagRecErrLineComponentName DisplayString
  mscShelfCardDiagRecErrLineStorageType StorageType
  mscShelfCardDiagRecErrLineIndex Integer32

MscShelfCardDiagRecErrLineOperEntry  
SEQUENCE    
  mscShelfCardDiagRecErrLineData ExtendedAsciiString

MscShelfCardDcardRowStatusEntry  
SEQUENCE    
  mscShelfCardDcardRowStatus RowStatus
  mscShelfCardDcardComponentName DisplayString
  mscShelfCardDcardStorageType StorageType
  mscShelfCardDcardIndex Integer32

MscShelfCardDcardDcardOperEntry  
SEQUENCE    
  mscShelfCardDcardType INTEGER
  mscShelfCardDcardMemorySize Unsigned32
  mscShelfCardDcardProductCode AsciiString

MscModRowStatusEntry  
SEQUENCE    
  mscModRowStatus RowStatus
  mscModComponentName DisplayString
  mscModStorageType StorageType
  mscModIndex NonReplicated

MscModProvEntry  
SEQUENCE    
  mscModNodeId Unsigned32
  mscModNodeName AsciiString
  mscModNamsId Unsigned32
  mscModRegionId Unsigned32
  mscModNodePrefix AsciiString

MscModNodePrefixesEntry  
SEQUENCE    
  mscModNodePrefixesIndex Integer32
  mscModNodePrefixesValue AsciiString

MscModAlternatePorsPrefixesEntry  
SEQUENCE    
  mscModAlternatePorsPrefixesIndex Integer32
  mscModAlternatePorsPrefixesValue AsciiString

Defined Values

baseShelfMIB 1.3.6.1.4.1.562.36.2.2.146
OBJECT IDENTIFIER    

mscShelf 1.3.6.1.4.1.562.36.2.1.13
OBJECT IDENTIFIER    

mscShelfRowStatusTable 1.3.6.1.4.1.562.36.2.1.13.1
This entry controls the addition and deletion of mscShelf components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfRowStatusEntry

mscShelfRowStatusEntry 1.3.6.1.4.1.562.36.2.1.13.1.1
A single entry in the table represents a single mscShelf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfRowStatusEntry  

mscShelfRowStatus 1.3.6.1.4.1.562.36.2.1.13.1.1.1
This variable is used as the basis for SNMP naming of mscShelf components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscShelfComponentName 1.3.6.1.4.1.562.36.2.1.13.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscShelfStorageType 1.3.6.1.4.1.562.36.2.1.13.1.1.4
This variable represents the storage type value for the mscShelf tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscShelfIndex 1.3.6.1.4.1.562.36.2.1.13.1.1.10
This variable represents the index for the mscShelf tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscShelfProvTable 1.3.6.1.4.1.562.36.2.1.13.10
This group contains the provisionable attributes for the Shelf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfProvEntry

mscShelfProvEntry 1.3.6.1.4.1.562.36.2.1.13.10.1
An entry in the mscShelfProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfProvEntry  

mscShelfCommentText 1.3.6.1.4.1.562.36.2.1.13.10.1.1
This is an arbitrary string that can be used to specify the location of the module. It is not used by the system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..80)  

mscShelfOperTable 1.3.6.1.4.1.562.36.2.1.13.11
This group contains the operational attributes for the Shelf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfOperEntry

mscShelfOperEntry 1.3.6.1.4.1.562.36.2.1.13.11.1
An entry in the mscShelfOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfOperEntry  

mscShelfBusOperatingMode 1.3.6.1.4.1.562.36.2.1.13.11.1.1
This attribute indicates the current backplane bus operating mode: noBus No bus is in service now. singleBusX The shelf is running on bus X only. singleBusY The shelf is running on bus Y only. dualBus The shelf is running on bus X and bus Y.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER noBus(0), singleBusX(1), singleBusY(2), dualBus(3)  

mscShelfHardwareFailures 1.3.6.1.4.1.562.36.2.1.13.11.1.2
This attribute indicates which type of components have failed.The hardware's fault detection system can report the following kinds of component failures: card, power converter, cooling unit, terminator card, fan, input power feed or fabric card failures. card - The passport card has failed. powerConverter - The power converter has failed. coolingUnit - The cooling unit has failed. terminatorCard - The terminator card has failed. The following types only apply to fabric-based shelf: fan - The fan has failed. inputPowerFeed - The input power feed has failed. fabricCard - The fabric card has failed. macAddressCard - Mac address card has failed. alarmBitsCard - Alarm bit card has failed. Description of bits: card(0) powerConverter(1) coolingUnit(2) terminatorCard(3) fan(4) powerSupply(5) fabricCard(6) macAddressCard(7) alarmBitsCard(8)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

mscShelfNumberOfSlots 1.3.6.1.4.1.562.36.2.1.13.11.1.3
This attribute specifies the number of slots for this shelf.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..16  

mscShelfShelfType 1.3.6.1.4.1.562.36.2.1.13.11.1.5
This attribute displays the shelf type: busBasedShelf - bus based backplane shelf. fabricBasedShelf - fabric base backplane shelf.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER busBasedShelf(0), fabricBasedShelf(1)  

mscShelfBackplaneOperatingMode 1.3.6.1.4.1.562.36.2.1.13.11.1.7
This attribute indicates the current backplane operating mode. On the fabric-based shelf: noFabric - No fabric is in service now. singleFabricX - The shelf is running on fabric X only. singleFabricY - The shelf is running on fabric Y only. dualFabric - The shelf is running on fabric X and fabric Y. On the bus-based shelf: noBus - No bus is in service now. singleBusX - The shelf is running on bus X only. singleBusY - The shelf is running on bus Y only. dualBus - The shelf is running on bus X and bus Y
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noBus(0), singleBusX(1), singleBusY(2), dualBus(3), noFabric(4), singleFabricX(5), singleFabricY(6), dualFabric(7)  

mscShelfCard 1.3.6.1.4.1.562.36.2.1.13.2
OBJECT IDENTIFIER    

mscShelfCardRowStatusTable 1.3.6.1.4.1.562.36.2.1.13.2.1
This entry controls the addition and deletion of mscShelfCard components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardRowStatusEntry

mscShelfCardRowStatusEntry 1.3.6.1.4.1.562.36.2.1.13.2.1.1
A single entry in the table represents a single mscShelfCard component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardRowStatusEntry  

mscShelfCardRowStatus 1.3.6.1.4.1.562.36.2.1.13.2.1.1.1
This variable is used as the basis for SNMP naming of mscShelfCard components. These components can be added.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscShelfCardComponentName 1.3.6.1.4.1.562.36.2.1.13.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscShelfCardStorageType 1.3.6.1.4.1.562.36.2.1.13.2.1.1.4
This variable represents the storage type value for the mscShelfCard tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscShelfCardIndex 1.3.6.1.4.1.562.36.2.1.13.2.1.1.10
This variable represents the index for the mscShelfCard tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..15  

mscShelfCardProvTable 1.3.6.1.4.1.562.36.2.1.13.2.10
This group contains the provisionable attributes for the Card component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardProvEntry

mscShelfCardProvEntry 1.3.6.1.4.1.562.36.2.1.13.2.10.1
An entry in the mscShelfCardProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardProvEntry  

mscShelfCardCardType 1.3.6.1.4.1.562.36.2.1.13.2.10.1.1
This is the type of card expected in this slot. Specifying a card type here has the effect of configuring a card to run in this slot. A value of none means that no card is configured to run in this slot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cP(0), v11(1), v35(2), dS1(3), dS1V(4), dS3(5), e1(6), e1V(7), e3(8), none(9), n1pFddiMultiMode(10), n4pTokenRing(11), n6pEth10BaseT(12), dS1C(13), e1C(14), n3pE3Atm(15), n3pDS3Atm(16), n3pOC3MmAtm(17), n3pOC3SmAtm(19), n3pE1Atm(20), n3pDS1Atm(21), j2MV(22), n4pEthAui(23), n1pFddiSingleMode(24), n1pDS1V(25), n1pE1V(26), n2pJ6MAtm(27), hSSI(33), n8pDS1(34), cFP1(35), dEV1(36), cFP2(37), dEV2(38), n4pDS1Aal1(39), n4pE1Aal1(40), n1pDS3C(41), ilsForwarder(42), n8pDS1Atm(43), n8pE1Atm(44), n1pE1Mvp(45), n1pDS1Mvp(46), n1pTTC2mMvp(47), n1pDS3cAal(51), n2pDS3cAal(52), n12mVspAal(53), n2pEth100BaseT(54), n2pOC3MmAtm2(55), n2pOC3SmAtm2(56), n3pDS3Atm2(57), n3pE3Atm2(58), cPeD(59), cPeE(60), n4pOC3SmIrAtm(61), n4pOC3MmAtm(62), n12pDS3Atm(63), n12pE3Atm(64), n1pOC12SmLrAtm(65), n1pE1Mvpe(66), n1pDS1Mvpe(67), n1pTTC2mMvpe(68), n32pDS1Msa(69), n32pDS1MsaMt(70), n32pDS1MsaMtp(71), n32pDS1MsaSt(72), n32pDS1MsaStp(73), n32pE1Aal(74), n1pOC48SmSrAtm(75), n4pDS3Ch(76), n4pDS3ChAtm(77), n1pSTM1ChSmIr(78), n1pSTM1ChSmIrAtm(79), n4pOC12SmIrAtm(80), n4pOC12SmLrAtm(81), n12mPcusp(82), n32pE1Msa(84), n32pE1MsaMt(85), n32pE1MsaMtp(86), n32pE1MsaSt(87), n32pE1MsaStp(88)  

mscShelfCardSparingConnection 1.3.6.1.4.1.562.36.2.1.13.2.10.1.2
This attribute contains the identification of the 1 for N sparing panel group of connectors to which the card is connected. This identification should coincide with the label located on the sparing panel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notApplicable(0), mainA(1), mainB(2), mainC(3), mainD(4), mainE(5), mainF(6), spare(16)  

mscShelfCardCommentText 1.3.6.1.4.1.562.36.2.1.13.2.10.1.4
This is an arbitrary string that can be used to specify the location of the sparing panel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..80)  

mscShelfCardStateTable 1.3.6.1.4.1.562.36.2.1.13.2.11
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardStateEntry

mscShelfCardStateEntry 1.3.6.1.4.1.562.36.2.1.13.2.11.1
An entry in the mscShelfCardStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardStateEntry  

mscShelfCardAdminState 1.3.6.1.4.1.562.36.2.1.13.2.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscShelfCardOperationalState 1.3.6.1.4.1.562.36.2.1.13.2.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscShelfCardUsageState 1.3.6.1.4.1.562.36.2.1.13.2.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscShelfCardAvailabilityStatus 1.3.6.1.4.1.562.36.2.1.13.2.11.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

mscShelfCardProceduralStatus 1.3.6.1.4.1.562.36.2.1.13.2.11.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscShelfCardControlStatus 1.3.6.1.4.1.562.36.2.1.13.2.11.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscShelfCardAlarmStatus 1.3.6.1.4.1.562.36.2.1.13.2.11.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscShelfCardStandbyStatus 1.3.6.1.4.1.562.36.2.1.13.2.11.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscShelfCardUnknownStatus 1.3.6.1.4.1.562.36.2.1.13.2.11.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscShelfCardOperTable 1.3.6.1.4.1.562.36.2.1.13.2.12
This group contains the operational attributes that reflect the current status of the card.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardOperEntry

mscShelfCardOperEntry 1.3.6.1.4.1.562.36.2.1.13.2.12.1
An entry in the mscShelfCardOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardOperEntry  

mscShelfCardCurrentLP 1.3.6.1.4.1.562.36.2.1.13.2.12.1.1
This is the component name of the LP currently running on this card.
Status: obsolete Access: read-only
OBJECT-TYPE    
  RowPointer  

mscShelfCardFailureCause 1.3.6.1.4.1.562.36.2.1.13.2.12.1.2
This attribute indicates why the card has failed. This attribute is meaningful when the OSI AvailabilityStatus attribute is set to failed. none - The card is operational. wrongCardType - The wrong card type has been inserted. notConfigured - The card is not configured. cannotLoadSoftware - The card can not load software. failedSelfTests - The card failed itself test. notResponding - The card is not responding. backplaneConnectivityProblem - The card is not properly connected to the backplane. unsupportedPecCode - The card is with unsupported PEC code is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), wrongCardType(1), notConfigured(2), cannotLoadSoftware(3), failedSelfTests(4), notResponding(5), backplaneConnectivityProblem(6), unsupportedPecCode(7)  

mscShelfCardSelfTestFault 1.3.6.1.4.1.562.36.2.1.13.2.12.1.3
This attribute indicates the result of the processor card's self-tests that were performed when it initially came up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0)  

mscShelfCardSparingConnectionStatus 1.3.6.1.4.1.562.36.2.1.13.2.12.1.4
This attribute indicates if the control signal received from a 1forN sparing panel or a 1for1 sparing panel is properly terminated. notApplicable - The card is not provisioned as part of a sparing configuration, and is not connected to any sparing panel. 1for1Ok -The card is provisioned correctly for 1for1 sparing and is connected to the active relay of a 1for1 sparing panel. 1forNOk -The card is provisioned correctly for either 1for1 or 1forN sparing and is connected to either the standby or active relay of a 1forN sparing panel. unconfirmed -The card is provisioned as part of a sparing configuration, but its connection status cannot be determined. To determine if the card is connected to a sparing panel, perform a switchover of the LP to see if the card will grab a relay when it is active. If the card has grabbed the relay, the sparing connection status should change from, unconfirmed, to 1for1Ok and the LED on the sparing panel corresponfing to that relay should be illuminated. Please note: Performing the switchover will disrupt traffic on the other card and this test should be conducted when no traffic is running on the active card. notConnected - The card is provisioned as part of a sparing configuration, but is not connected to a sparing panel. Remedial Action: Check the cable connectivity between the card and the sparing panel. incorrectlyConnected - The card is provisioned as part of a sparing configuration, but is connected to the wrong port on a 1forN panel, or is connected to a 1for1 sparing panel while configured for 1forN. Remedial Action: Connect the cable to the port that was specified by the sparingConnection attribute. inconsistentlyConnected - The card is provisioned as part of a 1forN sparing configuration, but is connected to a sparing panel which is not the same as the other cards sharing the same spare card. Remedial Action: Ensure all cards that share the same spare card are connected to the same sparing panel. This value is also used to indicate that two sparing panels with the same sparing panel IDs are being used by cards on the same shelf. Remedial Action: Replace one of the sparing panels with another panel that has a different sparing panel ID. Sparing panel IDs are assigned at the time of manufacture and cannot be changed by the user.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), n1for1Ok(1), n1forNOk(2), unconfirmed(3), notConnected(4), incorrectlyConnected(5), inconsistentlyConnected(6)  

mscShelfCardHardwareAlarm 1.3.6.1.4.1.562.36.2.1.13.2.12.1.5
This attribute indicates whether and why the card is generating a hardware alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), batteryFeedFailure(1)  

mscShelfCardPropTable 1.3.6.1.4.1.562.36.2.1.13.2.13
This group contains the operational attributes that specify the fixed characteristics of the card.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardPropEntry

mscShelfCardPropEntry 1.3.6.1.4.1.562.36.2.1.13.2.13.1
An entry in the mscShelfCardPropTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardPropEntry  

mscShelfCardInsertedCardType 1.3.6.1.4.1.562.36.2.1.13.2.13.1.1
This attribute indicates the type of card that is currently inserted in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER cP(0), v11(1), v35(2), dS1(3), dS1V(4), dS3(5), e1(6), e1V(7), e3(8), none(9), n1pFddiMultiMode(10), n4pTokenRing(11), n6pEth10BaseT(12), dS1C(13), e1C(14), n3pE3Atm(15), n3pDS3Atm(16), n3pOC3MmAtm(17), n1pOC3MmAtm(18), n3pOC3SmAtm(19), n3pE1Atm(20), n3pDS1Atm(21), j2MV(22), n4pEthAui(23), n1pFddiSingleMode(24), n1pDS1V(25), n1pE1V(26), n2pJ6MAtm(27), hSSI(33), n8pDS1(34), cFP1(35), dEV1(36), cFP2(37), dEV2(38), n4pDS1Aal1(39), n4pE1Aal1(40), n1pDS3C(41), ilsForwarder(42), n8pDS1Atm(43), n8pE1Atm(44), n1pE1Mvp(45), n1pDS1Mvp(46), n1pTTC2mMvp(47), n1pDS3cAal(51), n2pDS3cAal(52), n12mVspAal(53), n2pEth100BaseT(54), n2pOC3MmAtm2(55), n2pOC3SmAtm2(56), n3pDS3Atm2(57), n3pE3Atm2(58), cPeD(59), cPeE(60), n4pOC3SmIrAtm(61), n4pOC3MmAtm(62), n12pDS3Atm(63), n12pE3Atm(64), n1pOC12SmLrAtm(65), n1pE1Mvpe(66), n1pDS1Mvpe(67), n1pTTC2mMvpe(68), n32pDS1Msa(69), n32pDS1MsaMt(70), n32pDS1MsaMtp(71), n32pDS1MsaSt(72), n32pDS1MsaStp(73), n32pE1Aal(74), n1pOC48SmSrAtm(75), n4pDS3Ch(76), n4pDS3ChAtm(77), n1pSTM1ChSmIr(78), n1pSTM1ChSmIrAtm(79), n4pOC12SmIrAtm(80), n4pOC12SmLrAtm(81), n12mPcusp(82), n32pE1Msa(84), n32pE1MsaMt(85), n32pE1MsaMtp(86), n32pE1MsaSt(87), n32pE1MsaStp(88)  

mscShelfCardPmRevisionCode 1.3.6.1.4.1.562.36.2.1.13.2.13.1.2
This attribute indicates the hardware revision level of the Processor Module (PM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..16)  

mscShelfCardImRevisionCode 1.3.6.1.4.1.562.36.2.1.13.2.13.1.3
This attribute indicates the hardware revision level of the Interface Module (IM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..16)  

mscShelfCardSerialNumber 1.3.6.1.4.1.562.36.2.1.13.2.13.1.4
This attribute indicates the processor card's serial number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..16)  

mscShelfCardActiveFirmwareVersion 1.3.6.1.4.1.562.36.2.1.13.2.13.1.5
This attribute indicates the firmware version of the currently active flash memory bank.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..16)  

mscShelfCardInactiveFirmwareVersion 1.3.6.1.4.1.562.36.2.1.13.2.13.1.6
This attribute indicates the firmware version of the currently inactive flash memory bank.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..16)  

mscShelfCardProductCode 1.3.6.1.4.1.562.36.2.1.13.2.13.1.7
This attribute indicates the product ordering code and release of the card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..12)  

mscShelfCardUtilTable 1.3.6.1.4.1.562.36.2.1.13.2.14
This group contains the operational attributes that specify the processor's utilization levels. When this group exists for an LP component, the attributes are representative of the active card.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardUtilEntry

mscShelfCardUtilEntry 1.3.6.1.4.1.562.36.2.1.13.2.14.1
An entry in the mscShelfCardUtilTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardUtilEntry  

mscShelfCardTimeInterval 1.3.6.1.4.1.562.36.2.1.13.2.14.1.1
This attribute indicates the time period (in minutes) for which the average, minimum and maximum utilization values are calculated. This attribute is reset to 0 every 15 minutes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..15  

mscShelfCardCpuUtil 1.3.6.1.4.1.562.36.2.1.13.2.14.1.2
This attribute indicates an approximation of the current processor utilization level (expressed as a percentage).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

mscShelfCardCpuUtilAvg 1.3.6.1.4.1.562.36.2.1.13.2.14.1.3
This attribute indicates an average processor utilization level over the specified time period, timeInterval. This average is calculated based on one minute CPU utilization averages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

mscShelfCardCpuUtilAvgMin 1.3.6.1.4.1.562.36.2.1.13.2.14.1.4
This attribute indicates the minimum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

mscShelfCardCpuUtilAvgMax 1.3.6.1.4.1.562.36.2.1.13.2.14.1.5
This attribute indicates the maximum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

mscShelfCardMsgBlockUsage 1.3.6.1.4.1.562.36.2.1.13.2.14.1.6
This attribute indicates the processor's current shared message block memory utilization. If there is no shared memory on the card, this attribute indicates 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscShelfCardMsgBlockUsageAvg 1.3.6.1.4.1.562.36.2.1.13.2.14.1.7
This attribute indicates the processor's average memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscShelfCardMsgBlockUsageAvgMin 1.3.6.1.4.1.562.36.2.1.13.2.14.1.8
This attribute indicates the processor's minimum memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscShelfCardMsgBlockUsageAvgMax 1.3.6.1.4.1.562.36.2.1.13.2.14.1.9
This attribute indicates the processor's maximum memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscShelfCardLocalMsgBlockUsage 1.3.6.1.4.1.562.36.2.1.13.2.14.1.10
This attribute indicates the processor's current memory utilization of message blocks which are used for local messaging on the card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscShelfCardLocalMsgBlockUsageAvg 1.3.6.1.4.1.562.36.2.1.13.2.14.1.11
This attribute indicates the processor's average memory utilization of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, localMsgBlockUsage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscShelfCardLocalMsgBlockUsageMin 1.3.6.1.4.1.562.36.2.1.13.2.14.1.12
This attribute indicates the processor's minimum memory utilization of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, localMsgBlockUsage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscShelfCardLocalMsgBlockUsageMax 1.3.6.1.4.1.562.36.2.1.13.2.14.1.13
This attribute indicates the processor's maximum memory utilization of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, localMsgBlockUsage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscShelfCardCapTable 1.3.6.1.4.1.562.36.2.1.13.2.15
This group contains the operational attributes that specify the processor's capacity levels. When this group exists for an LP component, the attributes are representative of the active Card.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardCapEntry

mscShelfCardCapEntry 1.3.6.1.4.1.562.36.2.1.13.2.15.1
An entry in the mscShelfCardCapTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardCapEntry  

mscShelfCardMsgBlockCapacity 1.3.6.1.4.1.562.36.2.1.13.2.15.1.1
This attribute indicates the processor card's shared message block memory capacity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscShelfCardLocalMsgBlockCapacity 1.3.6.1.4.1.562.36.2.1.13.2.15.1.2
This attribute indicates the processor card's local message block memory capacity. These message blocks are used for local messaging on the card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscShelfCardConfiguredLPsTable 1.3.6.1.4.1.562.36.2.1.13.2.243
This is a read-only attribute that shows which LPs are currently configured to run on this card (it is the opposite side of the LP component's mainCard and spareCard link attributes). Note that there is only one case where more than one LP can be configured to run on a card. This is when the card is configured as an N+1 spare. If this is not the case, the card is configured as a main card or as a 1for1 spare, only one LP can appear in this list.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardConfiguredLPsEntry

mscShelfCardConfiguredLPsEntry 1.3.6.1.4.1.562.36.2.1.13.2.243.1
An entry in the mscShelfCardConfiguredLPsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardConfiguredLPsEntry  

mscShelfCardConfiguredLPsValue 1.3.6.1.4.1.562.36.2.1.13.2.243.1.1
This variable represents both the value and the index for the mscShelfCardConfiguredLPsTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Link  

mscShelfCardMemoryCapacityTable 1.3.6.1.4.1.562.36.2.1.13.2.244
This attribute indicates the processor card's memory capacity for each type of memory.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardMemoryCapacityEntry

mscShelfCardMemoryCapacityEntry 1.3.6.1.4.1.562.36.2.1.13.2.244.1
An entry in the mscShelfCardMemoryCapacityTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardMemoryCapacityEntry  

mscShelfCardMemoryCapacityIndex 1.3.6.1.4.1.562.36.2.1.13.2.244.1.1
This variable represents the mscShelfCardMemoryCapacityTable specific index for the mscShelfCardMemoryCapacityTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER fastRam(0), normalRam(1), sharedRam(2)  

mscShelfCardMemoryCapacityValue 1.3.6.1.4.1.562.36.2.1.13.2.244.1.2
This variable represents an individual value for the mscShelfCardMemoryCapacityTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscShelfCardMemoryUsageTable 1.3.6.1.4.1.562.36.2.1.13.2.245
This attribute indicates the processor's current memory utilization for each type of memory.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardMemoryUsageEntry

mscShelfCardMemoryUsageEntry 1.3.6.1.4.1.562.36.2.1.13.2.245.1
An entry in the mscShelfCardMemoryUsageTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardMemoryUsageEntry  

mscShelfCardMemoryUsageIndex 1.3.6.1.4.1.562.36.2.1.13.2.245.1.1
This variable represents the mscShelfCardMemoryUsageTable specific index for the mscShelfCardMemoryUsageTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER fastRam(0), normalRam(1), sharedRam(2)  

mscShelfCardMemoryUsageValue 1.3.6.1.4.1.562.36.2.1.13.2.245.1.2
This variable represents an individual value for the mscShelfCardMemoryUsageTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscShelfCardMemoryUsageAvgTable 1.3.6.1.4.1.562.36.2.1.13.2.276
This attribute indicates the processor's average memory utilization for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardMemoryUsageAvgEntry

mscShelfCardMemoryUsageAvgEntry 1.3.6.1.4.1.562.36.2.1.13.2.276.1
An entry in the mscShelfCardMemoryUsageAvgTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardMemoryUsageAvgEntry  

mscShelfCardMemoryUsageAvgIndex 1.3.6.1.4.1.562.36.2.1.13.2.276.1.1
This variable represents the mscShelfCardMemoryUsageAvgTable specific index for the mscShelfCardMemoryUsageAvgTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER fastRam(0), normalRam(1), sharedRam(2)  

mscShelfCardMemoryUsageAvgValue 1.3.6.1.4.1.562.36.2.1.13.2.276.1.2
This variable represents an individual value for the mscShelfCardMemoryUsageAvgTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscShelfCardMemoryUsageAvgMinTable 1.3.6.1.4.1.562.36.2.1.13.2.277
This attribute indicates the processor's minimum memory utilization for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardMemoryUsageAvgMinEntry

mscShelfCardMemoryUsageAvgMinEntry 1.3.6.1.4.1.562.36.2.1.13.2.277.1
An entry in the mscShelfCardMemoryUsageAvgMinTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardMemoryUsageAvgMinEntry  

mscShelfCardMemoryUsageAvgMinIndex 1.3.6.1.4.1.562.36.2.1.13.2.277.1.1
This variable represents the mscShelfCardMemoryUsageAvgMinTable specific index for the mscShelfCardMemoryUsageAvgMinTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER fastRam(0), normalRam(1), sharedRam(2)  

mscShelfCardMemoryUsageAvgMinValue 1.3.6.1.4.1.562.36.2.1.13.2.277.1.2
This variable represents an individual value for the mscShelfCardMemoryUsageAvgMinTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscShelfCardMemoryUsageAvgMaxTable 1.3.6.1.4.1.562.36.2.1.13.2.278
This attribute indicates the processor's maximum memory utilization for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardMemoryUsageAvgMaxEntry

mscShelfCardMemoryUsageAvgMaxEntry 1.3.6.1.4.1.562.36.2.1.13.2.278.1
An entry in the mscShelfCardMemoryUsageAvgMaxTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardMemoryUsageAvgMaxEntry  

mscShelfCardMemoryUsageAvgMaxIndex 1.3.6.1.4.1.562.36.2.1.13.2.278.1.1
This variable represents the mscShelfCardMemoryUsageAvgMaxTable specific index for the mscShelfCardMemoryUsageAvgMaxTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER fastRam(0), normalRam(1), sharedRam(2)  

mscShelfCardMemoryUsageAvgMaxValue 1.3.6.1.4.1.562.36.2.1.13.2.278.1.2
This variable represents an individual value for the mscShelfCardMemoryUsageAvgMaxTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscShelfCardCurrentLpTable 1.3.6.1.4.1.562.36.2.1.13.2.406
This attribute indicates which LPs are currently associated with this card. A card configured as a 1forN spare may be associated with more than one LP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardCurrentLpEntry

mscShelfCardCurrentLpEntry 1.3.6.1.4.1.562.36.2.1.13.2.406.1
An entry in the mscShelfCardCurrentLpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardCurrentLpEntry  

mscShelfCardCurrentLpValue 1.3.6.1.4.1.562.36.2.1.13.2.406.1.1
This variable represents both the value and the index for the mscShelfCardCurrentLpTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

mscShelfCardTest 1.3.6.1.4.1.562.36.2.1.13.2.3
OBJECT IDENTIFIER    

mscShelfCardTestRowStatusTable 1.3.6.1.4.1.562.36.2.1.13.2.3.1
This entry controls the addition and deletion of mscShelfCardTest components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardTestRowStatusEntry

mscShelfCardTestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.13.2.3.1.1
A single entry in the table represents a single mscShelfCardTest component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardTestRowStatusEntry  

mscShelfCardTestRowStatus 1.3.6.1.4.1.562.36.2.1.13.2.3.1.1.1
This variable is used as the basis for SNMP naming of mscShelfCardTest components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscShelfCardTestComponentName 1.3.6.1.4.1.562.36.2.1.13.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscShelfCardTestStorageType 1.3.6.1.4.1.562.36.2.1.13.2.3.1.1.4
This variable represents the storage type value for the mscShelfCardTest tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscShelfCardTestIndex 1.3.6.1.4.1.562.36.2.1.13.2.3.1.1.10
This variable represents the index for the mscShelfCardTest tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscShelfCardTestStateTable 1.3.6.1.4.1.562.36.2.1.13.2.3.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardTestStateEntry

mscShelfCardTestStateEntry 1.3.6.1.4.1.562.36.2.1.13.2.3.10.1
An entry in the mscShelfCardTestStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardTestStateEntry  

mscShelfCardTestAdminState 1.3.6.1.4.1.562.36.2.1.13.2.3.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscShelfCardTestOperationalState 1.3.6.1.4.1.562.36.2.1.13.2.3.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscShelfCardTestUsageState 1.3.6.1.4.1.562.36.2.1.13.2.3.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscShelfCardTestSetupTable 1.3.6.1.4.1.562.36.2.1.13.2.3.11
This attribute group contains the attributes that govern the operation of a card test. These attributes cannot be changed while a card test is running.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardTestSetupEntry

mscShelfCardTestSetupEntry 1.3.6.1.4.1.562.36.2.1.13.2.3.11.1
An entry in the mscShelfCardTestSetupTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardTestSetupEntry  

mscShelfCardTestTargetCard 1.3.6.1.4.1.562.36.2.1.13.2.3.11.1.1
This attribute specifies the slot number of the card to which frames are sent during the card test. There is no single default value for this attributeit defaults to the slot number of the Test component's own card and must be changed to a different value before the test can be started.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

mscShelfCardTestFrmTypes 1.3.6.1.4.1.562.36.2.1.13.2.3.11.1.2
This attribute specifies the types of frames that are sent during the card test. It must contain at least one of the following values. loading: A set of 'loading frames' is circulated between the Test component and the Test component on the target card as rapidly as possible. This frame type should be selected when the test is intended to verify the operation of the cards and the backplane buses under a specified load. verification: A single 'verification frame' is transmitted to the Test component on the target card; when the frame is returned, its contents are verified and the next verification frame in the series is transmitted. This frame type should be selected when the test is intended to verify that frames are not being corrupted as they pass from card to card. Description of bits: loading(0) verification(1)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscShelfCardTestFrmPriorities 1.3.6.1.4.1.562.36.2.1.13.2.3.11.1.3
This attribute specifies the priorities of the frames that are sent during the card test. It must contain at least one of the following values. lowPriority: Low priority frames are sent. highPriority: High priority frames are sent. Description of bits: lowPriority(0) highPriority(1)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscShelfCardTestFrmPatternType 1.3.6.1.4.1.562.36.2.1.13.2.3.11.1.4
This attribute specifies the bit sequence to fill the frames used in the card test. It must contain one of the following values. ccitt32kBitPattern: a pseudo-random sequence of 32 Kbit is used ccitt8MBitPattern: a pseudo-random sequence of 8 Mbit is used customizedPattern: the pattern defined by the customizedPattern attribute is used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

mscShelfCardTestCustomizedPattern 1.3.6.1.4.1.562.36.2.1.13.2.3.11.1.5
This attribute specifies a 32 bit sequence used to fill frames when the framePatternType attribute has a value of customizedPattern. The default value gives a pattern of alternating 0 and 1 bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Hex 0..4294967295  

mscShelfCardTestDuration 1.3.6.1.4.1.562.36.2.1.13.2.3.11.1.6
This attribute specifies the maximum length of time that the card test is allowed to run. The value is expressed in minutes. The maximum allowed value permits the card test to be run for up to 30 days.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..43200  

mscShelfCardTestResultsTable 1.3.6.1.4.1.562.36.2.1.13.2.3.12
This attribute group contains the results of the card test that is currently running; if no test is running, the attribute group contains the results of the most recently completed card test. The attributes of the Results group are reset to their inital values whenever a card test is started or any attribute of the Setup group is set.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardTestResultsEntry

mscShelfCardTestResultsEntry 1.3.6.1.4.1.562.36.2.1.13.2.3.12.1
An entry in the mscShelfCardTestResultsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardTestResultsEntry  

mscShelfCardTestElapsedTime 1.3.6.1.4.1.562.36.2.1.13.2.3.12.1.1
This attribute records the length of time that the card test has been running.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..43200  

mscShelfCardTestTimeRemaining 1.3.6.1.4.1.562.36.2.1.13.2.3.12.1.2
This attribute records the maximum length of time that the card test will continue to run before stopping.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..43200  

mscShelfCardTestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.13.2.3.12.1.3
This attribute records the reason the card test ended. It contains one of the following values: neverStarted: the card test has not been started. testRunning: the card test is currently running. testTimeExpired: the card test ran for the specified duration. stoppedByOperator: a Stop command was issued. targetFailed: the target card became non-operational. becameActive: the source card became the active card for some LP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER neverStarted(0), testRunning(1), testTimeExpired(2), stoppedByOperator(3), targetFailed(4), becameActive(5)  

mscShelfCardTestSizeTable 1.3.6.1.4.1.562.36.2.1.13.2.3.253
This attribute specifies for each priority level the number of data bytes in each frame sent during the card test. (The value specified does not include the 4-byte header that is automatically added to a frame when it is transmitted over the backplane.)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardTestSizeEntry

mscShelfCardTestSizeEntry 1.3.6.1.4.1.562.36.2.1.13.2.3.253.1
An entry in the mscShelfCardTestSizeTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardTestSizeEntry  

mscShelfCardTestSizeIndex 1.3.6.1.4.1.562.36.2.1.13.2.3.253.1.1
This variable represents the mscShelfCardTestSizeTable specific index for the mscShelfCardTestSizeTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER lowPriority(0), highPriority(1)  

mscShelfCardTestSizeValue 1.3.6.1.4.1.562.36.2.1.13.2.3.253.1.2
This variable represents an individual value for the mscShelfCardTestSizeTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 16..16000  

mscShelfCardTestLoadingFrmDataTable 1.3.6.1.4.1.562.36.2.1.13.2.3.254
This attribute records information about the loading frames that have been transmitted to the Test component on the target card. The following data is shown for each priority level: the number of frames that have been transmitted, the number of frames that were not returned successfully. The attribute's value wraps to zero when they exceed the maximum permitted value. Note: A loading frame is considered to have been successfully returned even if it contains bit errors. Frame error statistics are recorded in the verificationFrmData attribute.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardTestLoadingFrmDataEntry

mscShelfCardTestLoadingFrmDataEntry 1.3.6.1.4.1.562.36.2.1.13.2.3.254.1
An entry in the mscShelfCardTestLoadingFrmDataTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardTestLoadingFrmDataEntry  

mscShelfCardTestLoadingFrmDataResultsIndex 1.3.6.1.4.1.562.36.2.1.13.2.3.254.1.1
This variable represents the next to last index for the mscShelfCardTestLoadingFrmDataTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER framesSent(0), framesLost(1)  

mscShelfCardTestLoadingFrmDataPriorityIndex 1.3.6.1.4.1.562.36.2.1.13.2.3.254.1.2
This variable represents the final index for the mscShelfCardTestLoadingFrmDataTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER low(0), high(1)  

mscShelfCardTestLoadingFrmDataValue 1.3.6.1.4.1.562.36.2.1.13.2.3.254.1.3
This variable represents an individual value for the mscShelfCardTestLoadingFrmDataTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscShelfCardTestVerificationFrmDataTable 1.3.6.1.4.1.562.36.2.1.13.2.3.255
This attribute records information about the verification frames that have been transmitted to the Test component on the target card. The following data is shown for each priority level: the number of frames that have been tested, the number of frames that had incorrect bits when returned. The attribute's values wrap around to zero when they exceed the maximum permitted value. Note: Verification frames that are not returned at all, or are returned too late, are considered 'lost' and are not counted in either of the above values. Frame loss statistics are recorded in the loadingFrmData attribute.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardTestVerificationFrmDataEntry

mscShelfCardTestVerificationFrmDataEntry 1.3.6.1.4.1.562.36.2.1.13.2.3.255.1
An entry in the mscShelfCardTestVerificationFrmDataTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardTestVerificationFrmDataEntry  

mscShelfCardTestVerificationFrmDataResultsIndex 1.3.6.1.4.1.562.36.2.1.13.2.3.255.1.1
This variable represents the next to last index for the mscShelfCardTestVerificationFrmDataTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER framesTested(0), framesBad(1)  

mscShelfCardTestVerificationFrmDataPriorityIndex 1.3.6.1.4.1.562.36.2.1.13.2.3.255.1.2
This variable represents the final index for the mscShelfCardTestVerificationFrmDataTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER low(0), high(1)  

mscShelfCardTestVerificationFrmDataValue 1.3.6.1.4.1.562.36.2.1.13.2.3.255.1.3
This variable represents an individual value for the mscShelfCardTestVerificationFrmDataTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscShelfCardDiag 1.3.6.1.4.1.562.36.2.1.13.2.4
OBJECT IDENTIFIER    

mscShelfCardDiagRowStatusTable 1.3.6.1.4.1.562.36.2.1.13.2.4.1
This entry controls the addition and deletion of mscShelfCardDiag components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardDiagRowStatusEntry

mscShelfCardDiagRowStatusEntry 1.3.6.1.4.1.562.36.2.1.13.2.4.1.1
A single entry in the table represents a single mscShelfCardDiag component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardDiagRowStatusEntry  

mscShelfCardDiagRowStatus 1.3.6.1.4.1.562.36.2.1.13.2.4.1.1.1
This variable is used as the basis for SNMP naming of mscShelfCardDiag components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscShelfCardDiagComponentName 1.3.6.1.4.1.562.36.2.1.13.2.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscShelfCardDiagStorageType 1.3.6.1.4.1.562.36.2.1.13.2.4.1.1.4
This variable represents the storage type value for the mscShelfCardDiag tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscShelfCardDiagIndex 1.3.6.1.4.1.562.36.2.1.13.2.4.1.1.10
This variable represents the index for the mscShelfCardDiag tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscShelfCardDiagTrapData 1.3.6.1.4.1.562.36.2.1.13.2.4.2
OBJECT IDENTIFIER    

mscShelfCardDiagTrapDataRowStatusTable 1.3.6.1.4.1.562.36.2.1.13.2.4.2.1
This entry controls the addition and deletion of mscShelfCardDiagTrapData components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardDiagTrapDataRowStatusEntry

mscShelfCardDiagTrapDataRowStatusEntry 1.3.6.1.4.1.562.36.2.1.13.2.4.2.1.1
A single entry in the table represents a single mscShelfCardDiagTrapData component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardDiagTrapDataRowStatusEntry  

mscShelfCardDiagTrapDataRowStatus 1.3.6.1.4.1.562.36.2.1.13.2.4.2.1.1.1
This variable is used as the basis for SNMP naming of mscShelfCardDiagTrapData components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscShelfCardDiagTrapDataComponentName 1.3.6.1.4.1.562.36.2.1.13.2.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscShelfCardDiagTrapDataStorageType 1.3.6.1.4.1.562.36.2.1.13.2.4.2.1.1.4
This variable represents the storage type value for the mscShelfCardDiagTrapData tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscShelfCardDiagTrapDataIndex 1.3.6.1.4.1.562.36.2.1.13.2.4.2.1.1.10
This variable represents the index for the mscShelfCardDiagTrapData tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscShelfCardDiagTrapDataLine 1.3.6.1.4.1.562.36.2.1.13.2.4.2.2
OBJECT IDENTIFIER    

mscShelfCardDiagTrapDataLineRowStatusTable 1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscShelfCardDiagTrapDataLine components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardDiagTrapDataLineRowStatusEntry

mscShelfCardDiagTrapDataLineRowStatusEntry 1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.1.1
A single entry in the table represents a single mscShelfCardDiagTrapDataLine component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardDiagTrapDataLineRowStatusEntry  

mscShelfCardDiagTrapDataLineRowStatus 1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscShelfCardDiagTrapDataLine components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscShelfCardDiagTrapDataLineComponentName 1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscShelfCardDiagTrapDataLineStorageType 1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.1.1.4
This variable represents the storage type value for the mscShelfCardDiagTrapDataLine tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscShelfCardDiagTrapDataLineIndex 1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.1.1.10
This variable represents the index for the mscShelfCardDiagTrapDataLine tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..500  

mscShelfCardDiagTrapDataLineOperTable 1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute group contains operational attributes for one line of trap data or recoverable error report.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardDiagTrapDataLineOperEntry

mscShelfCardDiagTrapDataLineOperEntry 1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.10.1
An entry in the mscShelfCardDiagTrapDataLineOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardDiagTrapDataLineOperEntry  

mscShelfCardDiagTrapDataLineData 1.3.6.1.4.1.562.36.2.1.13.2.4.2.2.10.1.1
This attribute contains one line of trap data or recoverable error report.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ExtendedAsciiString Size(0..512)  

mscShelfCardDiagRecErr 1.3.6.1.4.1.562.36.2.1.13.2.4.3
OBJECT IDENTIFIER    

mscShelfCardDiagRecErrRowStatusTable 1.3.6.1.4.1.562.36.2.1.13.2.4.3.1
This entry controls the addition and deletion of mscShelfCardDiagRecErr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardDiagRecErrRowStatusEntry

mscShelfCardDiagRecErrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.13.2.4.3.1.1
A single entry in the table represents a single mscShelfCardDiagRecErr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardDiagRecErrRowStatusEntry  

mscShelfCardDiagRecErrRowStatus 1.3.6.1.4.1.562.36.2.1.13.2.4.3.1.1.1
This variable is used as the basis for SNMP naming of mscShelfCardDiagRecErr components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscShelfCardDiagRecErrComponentName 1.3.6.1.4.1.562.36.2.1.13.2.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscShelfCardDiagRecErrStorageType 1.3.6.1.4.1.562.36.2.1.13.2.4.3.1.1.4
This variable represents the storage type value for the mscShelfCardDiagRecErr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscShelfCardDiagRecErrIndex 1.3.6.1.4.1.562.36.2.1.13.2.4.3.1.1.10
This variable represents the index for the mscShelfCardDiagRecErr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscShelfCardDiagRecErrLine 1.3.6.1.4.1.562.36.2.1.13.2.4.3.2
OBJECT IDENTIFIER    

mscShelfCardDiagRecErrLineRowStatusTable 1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscShelfCardDiagRecErrLine components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardDiagRecErrLineRowStatusEntry

mscShelfCardDiagRecErrLineRowStatusEntry 1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.1.1
A single entry in the table represents a single mscShelfCardDiagRecErrLine component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardDiagRecErrLineRowStatusEntry  

mscShelfCardDiagRecErrLineRowStatus 1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscShelfCardDiagRecErrLine components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscShelfCardDiagRecErrLineComponentName 1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscShelfCardDiagRecErrLineStorageType 1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.1.1.4
This variable represents the storage type value for the mscShelfCardDiagRecErrLine tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscShelfCardDiagRecErrLineIndex 1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.1.1.10
This variable represents the index for the mscShelfCardDiagRecErrLine tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..500  

mscShelfCardDiagRecErrLineOperTable 1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute group contains operational attributes for one line of trap data or recoverable error report.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardDiagRecErrLineOperEntry

mscShelfCardDiagRecErrLineOperEntry 1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.10.1
An entry in the mscShelfCardDiagRecErrLineOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardDiagRecErrLineOperEntry  

mscShelfCardDiagRecErrLineData 1.3.6.1.4.1.562.36.2.1.13.2.4.3.2.10.1.1
This attribute contains one line of trap data or recoverable error report.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ExtendedAsciiString Size(0..512)  

mscShelfCardDcard 1.3.6.1.4.1.562.36.2.1.13.2.16
OBJECT IDENTIFIER    

mscShelfCardDcardRowStatusTable 1.3.6.1.4.1.562.36.2.1.13.2.16.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscShelfCardDcard components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardDcardRowStatusEntry

mscShelfCardDcardRowStatusEntry 1.3.6.1.4.1.562.36.2.1.13.2.16.1.1
A single entry in the table represents a single mscShelfCardDcard component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardDcardRowStatusEntry  

mscShelfCardDcardRowStatus 1.3.6.1.4.1.562.36.2.1.13.2.16.1.1.1
This variable is used as the basis for SNMP naming of mscShelfCardDcard components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscShelfCardDcardComponentName 1.3.6.1.4.1.562.36.2.1.13.2.16.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscShelfCardDcardStorageType 1.3.6.1.4.1.562.36.2.1.13.2.16.1.1.4
This variable represents the storage type value for the mscShelfCardDcard tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscShelfCardDcardIndex 1.3.6.1.4.1.562.36.2.1.13.2.16.1.1.10
This variable represents the index for the mscShelfCardDcard tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..15  

mscShelfCardDcardDcardOperTable 1.3.6.1.4.1.562.36.2.1.13.2.16.17
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of the DaughterCard component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscShelfCardDcardDcardOperEntry

mscShelfCardDcardDcardOperEntry 1.3.6.1.4.1.562.36.2.1.13.2.16.17.1
An entry in the mscShelfCardDcardDcardOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscShelfCardDcardDcardOperEntry  

mscShelfCardDcardType 1.3.6.1.4.1.562.36.2.1.13.2.16.17.1.1
This attributes indicates the type of a daugher card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), ram(1), aqm(2), pqc(3), aqmpqc(4), processor(5)  

mscShelfCardDcardMemorySize 1.3.6.1.4.1.562.36.2.1.13.2.16.17.1.2
This attribute indicates the memory size in megabytes of the daughter card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscShelfCardDcardProductCode 1.3.6.1.4.1.562.36.2.1.13.2.16.17.1.3
This attribute indicates the product equipment code of the daughter card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..12)  

mscMod 1.3.6.1.4.1.562.36.2.1.16
OBJECT IDENTIFIER    

mscModRowStatusTable 1.3.6.1.4.1.562.36.2.1.16.1
This entry controls the addition and deletion of mscMod components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscModRowStatusEntry

mscModRowStatusEntry 1.3.6.1.4.1.562.36.2.1.16.1.1
A single entry in the table represents a single mscMod component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscModRowStatusEntry  

mscModRowStatus 1.3.6.1.4.1.562.36.2.1.16.1.1.1
This variable is used as the basis for SNMP naming of mscMod components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscModComponentName 1.3.6.1.4.1.562.36.2.1.16.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscModStorageType 1.3.6.1.4.1.562.36.2.1.16.1.1.4
This variable represents the storage type value for the mscMod tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscModIndex 1.3.6.1.4.1.562.36.2.1.16.1.1.10
This variable represents the index for the mscMod tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscModProvTable 1.3.6.1.4.1.562.36.2.1.16.10
Mod Provisionable This group provides attributes that are used by internal and external systems to identify the module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscModProvEntry

mscModProvEntry 1.3.6.1.4.1.562.36.2.1.16.10.1
An entry in the mscModProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscModProvEntry  

mscModNodeId 1.3.6.1.4.1.562.36.2.1.16.10.1.1
The nodeId is a number that uniquely identifies a Magellan Passport module in a Passport network. Changing the value of the nodeId will cause the node to restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4095  

mscModNodeName 1.3.6.1.4.1.562.36.2.1.16.10.1.2
The nodeName is a 12 character ASCII string that is unique to every Passport module in a Passport network. This name is the component instance value of EM - the root of the Passport component hierarchy. It has, therefore, the same restriction and behaviour as any ascii string instance value, e.g., it is converted to upper case. Note that the EM component is typically suppressed on output. Changing the value of the nodeName will cause the node to restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(1..12)  

mscModNamsId 1.3.6.1.4.1.562.36.2.1.16.10.1.3
This attribute stores the Network Administration (Nams) Identifier associated with the Passport node. It must be unique across the entire network of Passport nodes supporting the transport of DPN traffic as well as all RMs and AMs in the network. The namsId must be set when a DpnAddressPlan component is configured on an Passport node. The namsId is used in the accounting record, statistics record and in time change accounting record and identifies nodes in these records. The Nams Id is to be assigned by the network administrator. Value 49151 indicates that no Nams Id was assigned to the module. Changing the value of the namsId will cause the node to restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 256..49151  

mscModRegionId 1.3.6.1.4.1.562.36.2.1.16.10.1.4
This attribute identifies the Topology Region to which the node belongs. Nodes will only exchange topological information with connected nodes in the same region. The default value of 0 indicates that no regionId has been assigned to the module. A module using the default regionId belongs to the same region as the first neighbour which stages with it using a non- zero regionId. If another neighbour tries to stage using a different non-zero regionId, the trunk will not be allowed to come up. Changing the value of the regionId will NOT cause the node to restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..126  

mscModNodePrefix 1.3.6.1.4.1.562.36.2.1.16.10.1.5
This attribute specifies an NSAP prefix which is distributed to all other Passport nodes within a Topology region and by which this node can be identified. This prefix is used by PORS, PNNI routing, and Data Shunts. PORS calls that use NSAP addressing (for example, CES) will look for the node with the longest NSAP prefix that matches the called party address. The NSAP prefixes that PORS matches against are the nodePrefix and the alternatePorsPrefixes. PNNI forms the default value of the nodeAddressPrefix under the AtmPnni component with this NSAP prefix followed by a unique MAC address. Data Shunts uses the nodePrefix to form an NSAP address that is registered with the Networking API. This NSAP address is used to identify this node when establishing a Data Shunt. The value entered must be 26 characters long. All characters must be hexadecimal with the following restrictions: - the first two characters must be either '39', '45', or '47' - if the first two characters are '45', the 18th character must be an 'f' or an 'F'
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..26)  

mscModNodePrefixesTable 1.3.6.1.4.1.562.36.2.1.16.338
This attribute specifies five different NSAP prefixes which are distributed to all other Passport nodes within a Topology region and by which this node can be identified. PORS calls that use NSAP addressing (for example, CES) will look for the node with the longest NSAP prefix that matches the called party address. The default value of the nodeAddressPrefix under the AtmPnni component is formed by the first NSAP prefix followed by a unique MAC address. Each NSAP prefix may contain 40 hexadecimal characters with the exception of the first prefix which has a maximum length of 26 chracacters. This attribute was never deployed and will be removed prior to Gate 2..
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscModNodePrefixesEntry

mscModNodePrefixesEntry 1.3.6.1.4.1.562.36.2.1.16.338.1
An entry in the mscModNodePrefixesTable.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  MscModNodePrefixesEntry  

mscModNodePrefixesIndex 1.3.6.1.4.1.562.36.2.1.16.338.1.1
This variable represents the mscModNodePrefixesTable specific index for the mscModNodePrefixesTable.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4  

mscModNodePrefixesValue 1.3.6.1.4.1.562.36.2.1.16.338.1.2
This variable represents an individual value for the mscModNodePrefixesTable.
Status: obsolete Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..40)  

mscModAlternatePorsPrefixesTable 1.3.6.1.4.1.562.36.2.1.16.405
This attribute specifies four NSAP prefixes which are distributed to all other Passport nodes within a Topology region and by which this node can be identified. These prefixes are used by PORS. PORS calls that use NSAP addressing (for example, CES) will look for the node with the longest NSAP prefix that matches the called party address. The NSAP prefixes that PORS matches against are the alternatePorsPrefixes and the nodePrefix. These prefixes may contain up to 40 hexadecimal characters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscModAlternatePorsPrefixesEntry

mscModAlternatePorsPrefixesEntry 1.3.6.1.4.1.562.36.2.1.16.405.1
An entry in the mscModAlternatePorsPrefixesTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscModAlternatePorsPrefixesEntry  

mscModAlternatePorsPrefixesIndex 1.3.6.1.4.1.562.36.2.1.16.405.1.1
This variable represents the mscModAlternatePorsPrefixesTable specific index for the mscModAlternatePorsPrefixesTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..3  

mscModAlternatePorsPrefixesValue 1.3.6.1.4.1.562.36.2.1.16.405.1.2
This variable represents an individual value for the mscModAlternatePorsPrefixesTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..40)  

baseShelfGroup 1.3.6.1.4.1.562.36.2.2.146.1
OBJECT IDENTIFIER    

baseShelfGroupCA 1.3.6.1.4.1.562.36.2.2.146.1.1
OBJECT IDENTIFIER    

baseShelfGroupCA02 1.3.6.1.4.1.562.36.2.2.146.1.1.3
OBJECT IDENTIFIER    

baseShelfGroupCA02A 1.3.6.1.4.1.562.36.2.2.146.1.1.3.2
OBJECT IDENTIFIER    

baseShelfCapabilities 1.3.6.1.4.1.562.36.2.2.146.3
OBJECT IDENTIFIER    

baseShelfCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.146.3.1
OBJECT IDENTIFIER    

baseShelfCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.146.3.1.3
OBJECT IDENTIFIER    

baseShelfCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.146.3.1.3.2
OBJECT IDENTIFIER