Nortel-MsCarrier-MscPassport-AtmNetworkingMIB

File: Nortel-MsCarrier-MscPassport-AtmNetworkingMIB.mib (198145 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB Nortel-MsCarrier-MscPassport-AtmCoreMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs mscComponents
Counter32 RowPointer DisplayString
StorageType RowStatus Gauge32
Integer32 Unsigned32 AsciiString
NonReplicated HexString FixedPoint1
AsciiStringIndex IntegerSequence mscAtmIfVptVcc
mscAtmIfVccIndex mscAtmIfVptIndex mscAtmIfVcc
mscAtmIfVpcIndex mscAtmIfVpc mscAtmIfVptVccIndex
mscAtmIfIndex

Defined Types

MscARtgRowStatusEntry  
SEQUENCE    
  mscARtgRowStatus RowStatus
  mscARtgComponentName DisplayString
  mscARtgStorageType StorageType
  mscARtgIndex NonReplicated

MscARtgStatsEntry  
SEQUENCE    
  mscARtgRoutingAttempts Counter32
  mscARtgFailedRoutingAttempts Counter32

MscARtgDnaRowStatusEntry  
SEQUENCE    
  mscARtgDnaRowStatus RowStatus
  mscARtgDnaComponentName DisplayString
  mscARtgDnaStorageType StorageType
  mscARtgDnaIndex AsciiStringIndex

MscARtgDnaDestInfoRowStatusEntry  
SEQUENCE    
  mscARtgDnaDestInfoRowStatus RowStatus
  mscARtgDnaDestInfoComponentName DisplayString
  mscARtgDnaDestInfoStorageType StorageType
  mscARtgDnaDestInfoIndex Integer32

MscARtgDnaDestInfoOperEntry  
SEQUENCE    
  mscARtgDnaDestInfoType INTEGER
  mscARtgDnaDestInfoScope INTEGER
  mscARtgDnaDestInfoStdComponentName RowPointer
  mscARtgDnaDestInfoReachability INTEGER

MscARtgPnniRowStatusEntry  
SEQUENCE    
  mscARtgPnniRowStatus RowStatus
  mscARtgPnniComponentName DisplayString
  mscARtgPnniStorageType StorageType
  mscARtgPnniIndex NonReplicated

MscARtgPnniProvEntry  
SEQUENCE    
  mscARtgPnniNodeAddressPrefix HexString
  mscARtgPnniDefaultScope Unsigned32
  mscARtgPnniDomain AsciiString
  mscARtgPnniRestrictTransit INTEGER
  mscARtgPnniMaxAlternateRoutesOnCrankback Unsigned32

MscARtgPnniPglParmsEntry  
SEQUENCE    
  mscARtgPnniPglInitTime Unsigned32
  mscARtgPnniOverrideDelay Unsigned32
  mscARtgPnniReElectionInterval Unsigned32

MscARtgPnniHlParmsEntry  
SEQUENCE    
  mscARtgPnniHelloHoldDown FixedPoint1
  mscARtgPnniHelloInterval Unsigned32
  mscARtgPnniHelloInactivityFactor Unsigned32

MscARtgPnniPtseParmsEntry  
SEQUENCE    
  mscARtgPnniPtseHoldDown FixedPoint1
  mscARtgPnniPtseRefreshInterval Unsigned32
  mscARtgPnniPtseLifetimeFactor Unsigned32
  mscARtgPnniRequestRxmtInterval Unsigned32
  mscARtgPnniPeerDelayedAckInterval FixedPoint1

MscARtgPnniThreshParmsEntry  
SEQUENCE    
  mscARtgPnniAvcrMt Unsigned32
  mscARtgPnniAvcrPm Unsigned32

MscARtgPnniOperEntry  
SEQUENCE    
  mscARtgPnniTopologyMemoryExhaustion INTEGER

MscARtgPnniStatsEntry  
SEQUENCE    
  mscARtgPnniSuccessfulRoutingAttempts Counter32
  mscARtgPnniFailedRoutingAttempts Counter32
  mscARtgPnniAlternateRoutingAttempts Counter32

MscARtgPnniOptMetricEntry  
SEQUENCE    
  mscARtgPnniOptMetricIndex INTEGER
  mscARtgPnniOptMetricValue INTEGER

MscARtgPnniRfRowStatusEntry  
SEQUENCE    
  mscARtgPnniRfRowStatus RowStatus
  mscARtgPnniRfComponentName DisplayString
  mscARtgPnniRfStorageType StorageType
  mscARtgPnniRfIndex NonReplicated

MscARtgPnniRfCriteriaEntry  
SEQUENCE    
  mscARtgPnniRfDestinationAddress HexString
  mscARtgPnniRfMaxRoutes Unsigned32
  mscARtgPnniRfTxTrafficDescType INTEGER
  mscARtgPnniRfRxTrafficDescType INTEGER
  mscARtgPnniRfAtmServiceCategory INTEGER
  mscARtgPnniRfFwdQosClass INTEGER
  mscARtgPnniRfBwdQosClass INTEGER
  mscARtgPnniRfBearerClassBbc INTEGER
  mscARtgPnniRfTransferCapabilityBbc INTEGER
  mscARtgPnniRfClippingBbc INTEGER
  mscARtgPnniRfBestEffort INTEGER
  mscARtgPnniRfOptimizationMetric INTEGER

MscARtgPnniRfRxTdpEntry  
SEQUENCE    
  mscARtgPnniRfRxTdpIndex Integer32
  mscARtgPnniRfRxTdpValue Unsigned32

MscARtgPnniRfTxTdpEntry  
SEQUENCE    
  mscARtgPnniRfTxTdpIndex Integer32
  mscARtgPnniRfTxTdpValue Unsigned32

MscARtgPnniRfFqpEntry  
SEQUENCE    
  mscARtgPnniRfFqpIndex INTEGER
  mscARtgPnniRfFqpValue Unsigned32

MscARtgPnniRfBqpEntry  
SEQUENCE    
  mscARtgPnniRfBqpIndex INTEGER
  mscARtgPnniRfBqpValue Unsigned32

MscARtgPnniCfgNodeRowStatusEntry  
SEQUENCE    
  mscARtgPnniCfgNodeRowStatus RowStatus
  mscARtgPnniCfgNodeComponentName DisplayString
  mscARtgPnniCfgNodeStorageType StorageType
  mscARtgPnniCfgNodeIndex Integer32

MscARtgPnniCfgNodeProvEntry  
SEQUENCE    
  mscARtgPnniCfgNodeNodeId HexString
  mscARtgPnniCfgNodePeerGroupId HexString

MscARtgPnniCfgNodeOperEntry  
SEQUENCE    
  mscARtgPnniCfgNodeNodeAddress HexString
  mscARtgPnniCfgNodeOpNodeId HexString
  mscARtgPnniCfgNodeOpPeerGroupId HexString
  mscARtgPnniCfgNodeNumNeighbors Unsigned32
  mscARtgPnniCfgNodeNumRccs Unsigned32
  mscARtgPnniCfgNodeCurrentLeadershipPriority Unsigned32
  mscARtgPnniCfgNodePglElectionState INTEGER

MscARtgPnniCfgNodeSAddrRowStatusEntry  
SEQUENCE    
  mscARtgPnniCfgNodeSAddrRowStatus RowStatus
  mscARtgPnniCfgNodeSAddrComponentName DisplayString
  mscARtgPnniCfgNodeSAddrStorageType StorageType
  mscARtgPnniCfgNodeSAddrAddressIndex HexString
  mscARtgPnniCfgNodeSAddrPrefixLengthIndex Integer32
  mscARtgPnniCfgNodeSAddrReachabilityIndex INTEGER

MscARtgPnniCfgNodeSAddrProvEntry  
SEQUENCE    
  mscARtgPnniCfgNodeSAddrSuppress INTEGER

MscARtgPnniCfgNodeSAddrOperEntry  
SEQUENCE    
  mscARtgPnniCfgNodeSAddrState INTEGER
  mscARtgPnniCfgNodeSAddrScope INTEGER

MscARtgPnniCfgNodeNbrRowStatusEntry  
SEQUENCE    
  mscARtgPnniCfgNodeNbrRowStatus RowStatus
  mscARtgPnniCfgNodeNbrComponentName DisplayString
  mscARtgPnniCfgNodeNbrStorageType StorageType
  mscARtgPnniCfgNodeNbrIndex HexString

MscARtgPnniCfgNodeNbrOperEntry  
SEQUENCE    
  mscARtgPnniCfgNodeNbrPeerState INTEGER

MscARtgPnniCfgNodeNbrStatsEntry  
SEQUENCE    
  mscARtgPnniCfgNodeNbrPtspRx Counter32
  mscARtgPnniCfgNodeNbrPtspTx Counter32
  mscARtgPnniCfgNodeNbrPtseRx Counter32
  mscARtgPnniCfgNodeNbrPtseTx Counter32
  mscARtgPnniCfgNodeNbrPtseReqRx Counter32
  mscARtgPnniCfgNodeNbrPtseReqTx Counter32
  mscARtgPnniCfgNodeNbrPtseAcksRx Counter32
  mscARtgPnniCfgNodeNbrPtseAcksTx Counter32
  mscARtgPnniCfgNodeNbrDbSummariesRx Counter32
  mscARtgPnniCfgNodeNbrDbSummariesTx Counter32
  mscARtgPnniCfgNodeNbrBadPtspRx Counter32
  mscARtgPnniCfgNodeNbrBadPtseRx Counter32
  mscARtgPnniCfgNodeNbrBadPtseReqRx Counter32
  mscARtgPnniCfgNodeNbrBadPtseAckRx Counter32
  mscARtgPnniCfgNodeNbrBadDbSummariesRx Counter32

MscARtgPnniCfgNodeNbrRccListEntry  
SEQUENCE    
  mscARtgPnniCfgNodeNbrRccListValue RowPointer

MscARtgPnniCfgNodeDefSAddrRowStatusEntry  
SEQUENCE    
  mscARtgPnniCfgNodeDefSAddrRowStatus RowStatus
  mscARtgPnniCfgNodeDefSAddrComponentName DisplayString
  mscARtgPnniCfgNodeDefSAddrStorageType StorageType
  mscARtgPnniCfgNodeDefSAddrIndex NonReplicated

MscARtgPnniCfgNodeDefSAddrDefAddrEntry  
SEQUENCE    
  mscARtgPnniCfgNodeDefSAddrAddress HexString

MscARtgPnniCfgNodeDefSAddrOperEntry  
SEQUENCE    
  mscARtgPnniCfgNodeDefSAddrState INTEGER
  mscARtgPnniCfgNodeDefSAddrScope INTEGER

MscARtgPnniTopRowStatusEntry  
SEQUENCE    
  mscARtgPnniTopRowStatus RowStatus
  mscARtgPnniTopComponentName DisplayString
  mscARtgPnniTopStorageType StorageType
  mscARtgPnniTopIndex Integer32

MscARtgPnniTopOperEntry  
SEQUENCE    
  mscARtgPnniTopPtsesInDatabase Gauge32
  mscARtgPnniTopPglNodeId HexString
  mscARtgPnniTopActiveParentNodeId HexString
  mscARtgPnniTopPreferredPglNodeId HexString

MscARtgPnniTopNodeRowStatusEntry  
SEQUENCE    
  mscARtgPnniTopNodeRowStatus RowStatus
  mscARtgPnniTopNodeComponentName DisplayString
  mscARtgPnniTopNodeStorageType StorageType
  mscARtgPnniTopNodeIndex HexString

MscARtgPnniTopNodeAddrRowStatusEntry  
SEQUENCE    
  mscARtgPnniTopNodeAddrRowStatus RowStatus
  mscARtgPnniTopNodeAddrComponentName DisplayString
  mscARtgPnniTopNodeAddrStorageType StorageType
  mscARtgPnniTopNodeAddrAddressIndex HexString
  mscARtgPnniTopNodeAddrPrefixLengthIndex Integer32
  mscARtgPnniTopNodeAddrReachabilityIndex INTEGER

MscARtgPnniTopNodeAddrOperEntry  
SEQUENCE    
  mscARtgPnniTopNodeAddrScope Unsigned32

MscARtgPnniTopNodeLinkRowStatusEntry  
SEQUENCE    
  mscARtgPnniTopNodeLinkRowStatus RowStatus
  mscARtgPnniTopNodeLinkComponentName DisplayString
  mscARtgPnniTopNodeLinkStorageType StorageType
  mscARtgPnniTopNodeLinkIndex Integer32

MscARtgPnniTopNodeLinkOperEntry  
SEQUENCE    
  mscARtgPnniTopNodeLinkRemoteNodeId HexString
  mscARtgPnniTopNodeLinkRemotePortId Unsigned32

MscARtgPnniPortRowStatusEntry  
SEQUENCE    
  mscARtgPnniPortRowStatus RowStatus
  mscARtgPnniPortComponentName DisplayString
  mscARtgPnniPortStorageType StorageType
  mscARtgPnniPortIndex Integer32

MscARtgPnniPortOperEntry  
SEQUENCE    
  mscARtgPnniPortStdComponentName RowPointer

MscAtmCRRowStatusEntry  
SEQUENCE    
  mscAtmCRRowStatus RowStatus
  mscAtmCRComponentName DisplayString
  mscAtmCRStorageType StorageType
  mscAtmCRIndex NonReplicated

MscAtmCRProvEntry  
SEQUENCE    
  mscAtmCRNodeAddress AsciiString

MscAtmCRStatsEntry  
SEQUENCE    
  mscAtmCRCallsRouted Counter32
  mscAtmCRCallsFailed Counter32

MscAtmCRDnaRowStatusEntry  
SEQUENCE    
  mscAtmCRDnaRowStatus RowStatus
  mscAtmCRDnaComponentName DisplayString
  mscAtmCRDnaStorageType StorageType
  mscAtmCRDnaIndex AsciiStringIndex

MscAtmCRDnaDestinationNameEntry  
SEQUENCE    
  mscAtmCRDnaDestinationNameValue RowPointer

MscAtmIfVpcSrcRowStatusEntry  
SEQUENCE    
  mscAtmIfVpcSrcRowStatus RowStatus
  mscAtmIfVpcSrcComponentName DisplayString
  mscAtmIfVpcSrcStorageType StorageType
  mscAtmIfVpcSrcIndex NonReplicated

MscAtmIfVpcSrcProvEntry  
SEQUENCE    
  mscAtmIfVpcSrcCallingAddress HexString
  mscAtmIfVpcSrcCalledAddress HexString
  mscAtmIfVpcSrcCalledVpi Unsigned32

MscAtmIfVpcSrcOperEntry  
SEQUENCE    
  mscAtmIfVpcSrcState INTEGER
  mscAtmIfVpcSrcRetryCount Counter32
  mscAtmIfVpcSrcLastFailureCauseCode Unsigned32
  mscAtmIfVpcSrcLastFailureDiagCode AsciiString

MscAtmIfVpcRpRowStatusEntry  
SEQUENCE    
  mscAtmIfVpcRpRowStatus RowStatus
  mscAtmIfVpcRpComponentName DisplayString
  mscAtmIfVpcRpStorageType StorageType
  mscAtmIfVpcRpIndex NonReplicated

MscAtmIfVpcRpOperEntry  
SEQUENCE    
  mscAtmIfVpcRpNextHop RowPointer

MscAtmIfVpcRpNextHopsEntry  
SEQUENCE    
  mscAtmIfVpcRpNextHopsValue RowPointer

MscAtmIfVpcDstRowStatusEntry  
SEQUENCE    
  mscAtmIfVpcDstRowStatus RowStatus
  mscAtmIfVpcDstComponentName DisplayString
  mscAtmIfVpcDstStorageType StorageType
  mscAtmIfVpcDstIndex NonReplicated

MscAtmIfVpcDstOperEntry  
SEQUENCE    
  mscAtmIfVpcDstCalledAddress HexString
  mscAtmIfVpcDstCallingAddress AsciiString
  mscAtmIfVpcDstCallingVpi AsciiString

MscAtmIfVccSrcRowStatusEntry  
SEQUENCE    
  mscAtmIfVccSrcRowStatus RowStatus
  mscAtmIfVccSrcComponentName DisplayString
  mscAtmIfVccSrcStorageType StorageType
  mscAtmIfVccSrcIndex NonReplicated

MscAtmIfVccSrcProvEntry  
SEQUENCE    
  mscAtmIfVccSrcRemoteAddress HexString
  mscAtmIfVccSrcRemoteVpiVci IntegerSequence
  mscAtmIfVccSrcCallingAddress HexString
  mscAtmIfVccSrcCalledAddress HexString
  mscAtmIfVccSrcCalledVpiVci IntegerSequence

MscAtmIfVccSrcOperEntry  
SEQUENCE    
  mscAtmIfVccSrcState INTEGER
  mscAtmIfVccSrcRetryCount Counter32
  mscAtmIfVccSrcLastFailureCauseCode Unsigned32
  mscAtmIfVccSrcLastFailureDiagCode AsciiString

MscAtmIfVccEpRowStatusEntry  
SEQUENCE    
  mscAtmIfVccEpRowStatus RowStatus
  mscAtmIfVccEpComponentName DisplayString
  mscAtmIfVccEpStorageType StorageType
  mscAtmIfVccEpIndex NonReplicated

MscAtmIfVccEpOperEntry  
SEQUENCE    
  mscAtmIfVccEpApplicationName RowPointer

MscAtmIfVccRpRowStatusEntry  
SEQUENCE    
  mscAtmIfVccRpRowStatus RowStatus
  mscAtmIfVccRpComponentName DisplayString
  mscAtmIfVccRpStorageType StorageType
  mscAtmIfVccRpIndex NonReplicated

MscAtmIfVccRpOperEntry  
SEQUENCE    
  mscAtmIfVccRpNextHop RowPointer

MscAtmIfVccRpNextHopsEntry  
SEQUENCE    
  mscAtmIfVccRpNextHopsValue RowPointer

MscAtmIfVccDstRowStatusEntry  
SEQUENCE    
  mscAtmIfVccDstRowStatus RowStatus
  mscAtmIfVccDstComponentName DisplayString
  mscAtmIfVccDstStorageType StorageType
  mscAtmIfVccDstIndex NonReplicated

MscAtmIfVccDstOperEntry  
SEQUENCE    
  mscAtmIfVccDstCalledAddress HexString
  mscAtmIfVccDstCallingAddress AsciiString
  mscAtmIfVccDstCallingVpiVci AsciiString

MscAtmIfVptVccSrcRowStatusEntry  
SEQUENCE    
  mscAtmIfVptVccSrcRowStatus RowStatus
  mscAtmIfVptVccSrcComponentName DisplayString
  mscAtmIfVptVccSrcStorageType StorageType
  mscAtmIfVptVccSrcIndex NonReplicated

MscAtmIfVptVccSrcProvEntry  
SEQUENCE    
  mscAtmIfVptVccSrcRemoteAddress HexString
  mscAtmIfVptVccSrcRemoteVpiVci IntegerSequence
  mscAtmIfVptVccSrcCallingAddress HexString
  mscAtmIfVptVccSrcCalledAddress HexString
  mscAtmIfVptVccSrcCalledVpiVci IntegerSequence

MscAtmIfVptVccSrcOperEntry  
SEQUENCE    
  mscAtmIfVptVccSrcState INTEGER
  mscAtmIfVptVccSrcRetryCount Counter32
  mscAtmIfVptVccSrcLastFailureCauseCode Unsigned32
  mscAtmIfVptVccSrcLastFailureDiagCode AsciiString

MscAtmIfVptVccEpRowStatusEntry  
SEQUENCE    
  mscAtmIfVptVccEpRowStatus RowStatus
  mscAtmIfVptVccEpComponentName DisplayString
  mscAtmIfVptVccEpStorageType StorageType
  mscAtmIfVptVccEpIndex NonReplicated

MscAtmIfVptVccEpOperEntry  
SEQUENCE    
  mscAtmIfVptVccEpApplicationName RowPointer

MscAtmIfVptVccRpRowStatusEntry  
SEQUENCE    
  mscAtmIfVptVccRpRowStatus RowStatus
  mscAtmIfVptVccRpComponentName DisplayString
  mscAtmIfVptVccRpStorageType StorageType
  mscAtmIfVptVccRpIndex NonReplicated

MscAtmIfVptVccRpOperEntry  
SEQUENCE    
  mscAtmIfVptVccRpNextHop RowPointer

MscAtmIfVptVccRpNextHopsEntry  
SEQUENCE    
  mscAtmIfVptVccRpNextHopsValue RowPointer

MscAtmIfVptVccDstRowStatusEntry  
SEQUENCE    
  mscAtmIfVptVccDstRowStatus RowStatus
  mscAtmIfVptVccDstComponentName DisplayString
  mscAtmIfVptVccDstStorageType StorageType
  mscAtmIfVptVccDstIndex NonReplicated

MscAtmIfVptVccDstOperEntry  
SEQUENCE    
  mscAtmIfVptVccDstCalledAddress HexString
  mscAtmIfVptVccDstCallingAddress AsciiString
  mscAtmIfVptVccDstCallingVpiVci AsciiString

Defined Values

atmNetworkingMIB 1.3.6.1.4.1.562.36.2.2.42
OBJECT IDENTIFIER    

mscARtg 1.3.6.1.4.1.562.36.2.1.95
OBJECT IDENTIFIER    

mscARtgRowStatusTable 1.3.6.1.4.1.562.36.2.1.95.1
This entry controls the addition and deletion of mscARtg components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgRowStatusEntry

mscARtgRowStatusEntry 1.3.6.1.4.1.562.36.2.1.95.1.1
A single entry in the table represents a single mscARtg component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgRowStatusEntry  

mscARtgRowStatus 1.3.6.1.4.1.562.36.2.1.95.1.1.1
This variable is used as the basis for SNMP naming of mscARtg components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscARtgComponentName 1.3.6.1.4.1.562.36.2.1.95.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscARtgStorageType 1.3.6.1.4.1.562.36.2.1.95.1.1.4
This variable represents the storage type value for the mscARtg tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscARtgIndex 1.3.6.1.4.1.562.36.2.1.95.1.1.10
This variable represents the index for the mscARtg tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscARtgStatsTable 1.3.6.1.4.1.562.36.2.1.95.10
This group contains the statistical operational attributes of an ARtg component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgStatsEntry

mscARtgStatsEntry 1.3.6.1.4.1.562.36.2.1.95.10.1
An entry in the mscARtgStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgStatsEntry  

mscARtgRoutingAttempts 1.3.6.1.4.1.562.36.2.1.95.10.1.1
This attribute counts the total number of calls routed. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgFailedRoutingAttempts 1.3.6.1.4.1.562.36.2.1.95.10.1.2
This attribute counts the total number of calls which were not successfully routed.The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgDna 1.3.6.1.4.1.562.36.2.1.95.2
OBJECT IDENTIFIER    

mscARtgDnaRowStatusTable 1.3.6.1.4.1.562.36.2.1.95.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscARtgDna components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgDnaRowStatusEntry

mscARtgDnaRowStatusEntry 1.3.6.1.4.1.562.36.2.1.95.2.1.1
A single entry in the table represents a single mscARtgDna component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgDnaRowStatusEntry  

mscARtgDnaRowStatus 1.3.6.1.4.1.562.36.2.1.95.2.1.1.1
This variable is used as the basis for SNMP naming of mscARtgDna components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscARtgDnaComponentName 1.3.6.1.4.1.562.36.2.1.95.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscARtgDnaStorageType 1.3.6.1.4.1.562.36.2.1.95.2.1.1.4
This variable represents the storage type value for the mscARtgDna tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscARtgDnaIndex 1.3.6.1.4.1.562.36.2.1.95.2.1.1.10
This variable represents the index for the mscARtgDna tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..40)  

mscARtgDnaDestInfo 1.3.6.1.4.1.562.36.2.1.95.2.2
OBJECT IDENTIFIER    

mscARtgDnaDestInfoRowStatusTable 1.3.6.1.4.1.562.36.2.1.95.2.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscARtgDnaDestInfo components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgDnaDestInfoRowStatusEntry

mscARtgDnaDestInfoRowStatusEntry 1.3.6.1.4.1.562.36.2.1.95.2.2.1.1
A single entry in the table represents a single mscARtgDnaDestInfo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgDnaDestInfoRowStatusEntry  

mscARtgDnaDestInfoRowStatus 1.3.6.1.4.1.562.36.2.1.95.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscARtgDnaDestInfo components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscARtgDnaDestInfoComponentName 1.3.6.1.4.1.562.36.2.1.95.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscARtgDnaDestInfoStorageType 1.3.6.1.4.1.562.36.2.1.95.2.2.1.1.4
This variable represents the storage type value for the mscARtgDnaDestInfo tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscARtgDnaDestInfoIndex 1.3.6.1.4.1.562.36.2.1.95.2.2.1.1.10
This variable represents the index for the mscARtgDnaDestInfo tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..50  

mscARtgDnaDestInfoOperTable 1.3.6.1.4.1.562.36.2.1.95.2.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes for the DestInfo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgDnaDestInfoOperEntry

mscARtgDnaDestInfoOperEntry 1.3.6.1.4.1.562.36.2.1.95.2.2.10.1
An entry in the mscARtgDnaDestInfoOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgDnaDestInfoOperEntry  

mscARtgDnaDestInfoType 1.3.6.1.4.1.562.36.2.1.95.2.2.10.1.1
This attribute indicates the type of the address at the destination interface. Provisioned addresses are assigned a type of primary or alternate; ATM routing will try primary routes and then the alternate routes if none of the primary routes succeed. The type registered is used for dynamic addresses registered through ILMI. The type default is used for Soft PVC addresses. The type ebr indicates addresses used by Edge Based Rerouting.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER primary(0), alternate(1), registered(2), default(3), ebr(4)  

mscARtgDnaDestInfoScope 1.3.6.1.4.1.562.36.2.1.95.2.2.10.1.2
This attribute indicates the highest level (meaning the lowest level number) in the hierarchy that the address will be advertised to. A value of -1 indicates that the scope is not applicable since this node has not been configured as a PNNI node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..104  

mscARtgDnaDestInfoStdComponentName 1.3.6.1.4.1.562.36.2.1.95.2.2.10.1.3
This attribute represents a component name of the interface through which the address can be reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

mscARtgDnaDestInfoReachability 1.3.6.1.4.1.562.36.2.1.95.2.2.10.1.4
This attribute indicates whether the address is internal or exterior.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

mscARtgPnni 1.3.6.1.4.1.562.36.2.1.95.3
OBJECT IDENTIFIER    

mscARtgPnniRowStatusTable 1.3.6.1.4.1.562.36.2.1.95.3.1
This entry controls the addition and deletion of mscARtgPnni components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniRowStatusEntry

mscARtgPnniRowStatusEntry 1.3.6.1.4.1.562.36.2.1.95.3.1.1
A single entry in the table represents a single mscARtgPnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniRowStatusEntry  

mscARtgPnniRowStatus 1.3.6.1.4.1.562.36.2.1.95.3.1.1.1
This variable is used as the basis for SNMP naming of mscARtgPnni components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscARtgPnniComponentName 1.3.6.1.4.1.562.36.2.1.95.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscARtgPnniStorageType 1.3.6.1.4.1.562.36.2.1.95.3.1.1.4
This variable represents the storage type value for the mscARtgPnni tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscARtgPnniIndex 1.3.6.1.4.1.562.36.2.1.95.3.1.1.10
This variable represents the index for the mscARtgPnni tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscARtgPnniProvTable 1.3.6.1.4.1.562.36.2.1.95.3.10
This group contains the generic provisionable attributes of a Pnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniProvEntry

mscARtgPnniProvEntry 1.3.6.1.4.1.562.36.2.1.95.3.10.1
An entry in the mscARtgPnniProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniProvEntry  

mscARtgPnniNodeAddressPrefix 1.3.6.1.4.1.562.36.2.1.95.3.10.1.1
This attribute specifies the ATM address of this node. It allows the default node address to be overridden. If this attribute is set to the null string, then the default node address prefix is assumed, and computed as follows: the value provisioned for the ModuleData component's nodePrefix attribute, followed by a unique MAC address (6 octets).
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..19)  

mscARtgPnniDefaultScope 1.3.6.1.4.1.562.36.2.1.95.3.10.1.2
This attribute specifies the default PNNI scope for ATM addresses associated with this node. The PNNI scope determines the level to which the address will be advertised within the PNNI routing domain. A provisioned Addr component may override the default scope in a PnniInfo subcomponent. A value of 0 means that all addresses which do not have provisioned scopes will be advertised globally within the PNNI routing domain. The value specified must be numerically smaller than or equal to that of the lowest level at which this node is configured in the PNNI hierarchy.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..104  

mscARtgPnniDomain 1.3.6.1.4.1.562.36.2.1.95.3.10.1.3
This attribute specifies the routing domain name. This attribute should be set identically for all nodes in the same routing domain.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(1..32)  

mscARtgPnniRestrictTransit 1.3.6.1.4.1.562.36.2.1.95.3.10.1.4
This attribute specifies if the node should restrict tandeming of SVCs. If this attribute is set to true, then other lowest level nodes in the PNNI hierarchy will avoid traversing this node during route computation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscARtgPnniMaxAlternateRoutesOnCrankback 1.3.6.1.4.1.562.36.2.1.95.3.10.1.5
This attribute specifies the number of alternate routing attempts before a call requiring crank back is rejected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..20  

mscARtgPnniPglParmsTable 1.3.6.1.4.1.562.36.2.1.95.3.11
This group contains the provisionable attributes for the peer group leader election timer parameters of a Pnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniPglParmsEntry

mscARtgPnniPglParmsEntry 1.3.6.1.4.1.562.36.2.1.95.3.11.1
An entry in the mscARtgPnniPglParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniPglParmsEntry  

mscARtgPnniPglInitTime 1.3.6.1.4.1.562.36.2.1.95.3.11.1.1
This attribute specifies how long this node will delay advertising its choice of preferred peer group leader after having initialized operation and reached the full peer state with at least one neighbor in the peer group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

mscARtgPnniOverrideDelay 1.3.6.1.4.1.562.36.2.1.95.3.11.1.2
This attribute specifies how long a node will wait for itself to be declared the preferred peer group leader by unanimous agreement among its peers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

mscARtgPnniReElectionInterval 1.3.6.1.4.1.562.36.2.1.95.3.11.1.3
This attribute specifies how long this node will wait after losing connectivity to the current peer group leader before re-starting the process of electing a new peer group leader.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

mscARtgPnniHlParmsTable 1.3.6.1.4.1.562.36.2.1.95.3.12
This group contains the default provisionable Hello protocol parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniHlParmsEntry

mscARtgPnniHlParmsEntry 1.3.6.1.4.1.562.36.2.1.95.3.12.1
An entry in the mscARtgPnniHlParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniHlParmsEntry  

mscARtgPnniHelloHoldDown 1.3.6.1.4.1.562.36.2.1.95.3.12.1.1
This attribute is used to limit the rate at which this node sends out Hello packets. Specifically, it specifies the default minimum amount of time between successive Hellos used by routing control channels on this node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FixedPoint1 1..655350  

mscARtgPnniHelloInterval 1.3.6.1.4.1.562.36.2.1.95.3.12.1.2
This attribute specifies the default duration of the Hello Timer in seconds for routing control channels on this node. Every helloInterval seconds, this node will send out a Hello packet to the neighbor node, subject to the helloHoldDown timer having expired at least once since the last Hello packet was sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

mscARtgPnniHelloInactivityFactor 1.3.6.1.4.1.562.36.2.1.95.3.12.1.3
This attribute specifies the default number of Hello intervals allowed to pass without receiving a Hello from the neighbor node, before an attempt is made to re-stage, for routing control channels on this node. The hello inactivity timer is enabled in the oneWayInside, twoWayInside, oneWayOutside, twoWayOutside and commonOutside (see the helloState attribute on the Rcc component for a description of these states). Note that the value for the Hello interval used in the calculation is the one specified in the Hello packet from the neighbor node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

mscARtgPnniPtseParmsTable 1.3.6.1.4.1.562.36.2.1.95.3.13
This group contains the provisionable attributes for the PTSE timer values of a Pnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniPtseParmsEntry

mscARtgPnniPtseParmsEntry 1.3.6.1.4.1.562.36.2.1.95.3.13.1
An entry in the mscARtgPnniPtseParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniPtseParmsEntry  

mscARtgPnniPtseHoldDown 1.3.6.1.4.1.562.36.2.1.95.3.13.1.1
This attribute is used to limit the rate at which this node sends out PTSE packets. Specifically, it specifies the minimum amount of time in seconds that this node must wait between sending successive PTSE packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FixedPoint1 1..655350  

mscARtgPnniPtseRefreshInterval 1.3.6.1.4.1.562.36.2.1.95.3.13.1.2
This attribute specifies the duration of the PTSE Timer. Every ptseRefreshInterval seconds, this node will send out a self- originated PTSE packet to the neighbor node, subject to the ptseHoldDown timer having expired at least once since the last PTSE packet was sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 300..65535  

mscARtgPnniPtseLifetimeFactor 1.3.6.1.4.1.562.36.2.1.95.3.13.1.3
This attribute specifies the lifetime multiplier. The result of multiplying the ptseRefreshInterval by this value is used as the initial lifetime that this node places into PTSEs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 101..1000  

mscARtgPnniRequestRxmtInterval 1.3.6.1.4.1.562.36.2.1.95.3.13.1.4
This attribute specifies the period between retransmissions of unacknowledged Database Summary packets, PTSE Request packets and PTSPs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

mscARtgPnniPeerDelayedAckInterval 1.3.6.1.4.1.562.36.2.1.95.3.13.1.5
This attribute specifies the minimum amount of time between transmissions of delayed PTSE acknowledgment packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FixedPoint1 1..655350  

mscARtgPnniThreshParmsTable 1.3.6.1.4.1.562.36.2.1.95.3.14
This group contains the provisionable attributes for the change thresholds of a ARtg Pnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniThreshParmsEntry

mscARtgPnniThreshParmsEntry 1.3.6.1.4.1.562.36.2.1.95.3.14.1
An entry in the mscARtgPnniThreshParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniThreshParmsEntry  

mscARtgPnniAvcrMt 1.3.6.1.4.1.562.36.2.1.95.3.14.1.1
This attribute when multiplied by the Maximum Cell Rate specifies the minimum threshold used in the algorithms that determine significant change for average cell rate parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..99  

mscARtgPnniAvcrPm 1.3.6.1.4.1.562.36.2.1.95.3.14.1.2
This attribute when multiplied by the current Available Cell Rate specifies the threshold used in the algorithms that determine significant change for AvCR parameters. If the resulting threshold is lower than minimum threshold, minimum threshold will be used. Increasing the value of the attribute increases the range of insignificance and reduces the amount of PTSP flooding due to changes in resource availability.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..99  

mscARtgPnniOperTable 1.3.6.1.4.1.562.36.2.1.95.3.15
This group contains the generic operational attributes of an ARtg Pnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniOperEntry

mscARtgPnniOperEntry 1.3.6.1.4.1.562.36.2.1.95.3.15.1
An entry in the mscARtgPnniOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniOperEntry  

mscARtgPnniTopologyMemoryExhaustion 1.3.6.1.4.1.562.36.2.1.95.3.15.1.2
This attribute indicates if the topology database is overloaded. A node goes into a database overload state when it fails to store the complete topology database due to insufficient memory in the node. A node in this state performs resynchronization periodically by restarting all its Neighbor Peer Finite State Machines. The node will stay in this state until it synchronizes with all of its neighbors without any overload problems. When this attribute is set an alarm will be issued.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscARtgPnniStatsTable 1.3.6.1.4.1.562.36.2.1.95.3.16
This group contains the statistical operational attributes of a ARtg Pnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniStatsEntry

mscARtgPnniStatsEntry 1.3.6.1.4.1.562.36.2.1.95.3.16.1
An entry in the mscARtgPnniStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniStatsEntry  

mscARtgPnniSuccessfulRoutingAttempts 1.3.6.1.4.1.562.36.2.1.95.3.16.1.1
This attribute counts successful PNNI routing attempts. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniFailedRoutingAttempts 1.3.6.1.4.1.562.36.2.1.95.3.16.1.2
This attribute counts failed PNNI routing attempts. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniAlternateRoutingAttempts 1.3.6.1.4.1.562.36.2.1.95.3.16.1.3
This attribute counts successful PNNI alternate routing attempts. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniOptMetricTable 1.3.6.1.4.1.562.36.2.1.95.3.386
This attribute is a vector that specifies the optimization metric for each ATM service category. The optimization metric is used during Generic Connection Admission Control (GCAC) route computation. Setting the value to cdv for a particular service category will cause GCAC to optimize for cell delay variation on call setups requiring that service category. Setting the value to maxCtd for a particular service category will cause GCAC to optimize for maximum cell transfer delay on call setups requiring that service category. Setting the value to aw for a particular service category will cause GCAC to optimize for administrative weight on call setups requiring that service category.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniOptMetricEntry

mscARtgPnniOptMetricEntry 1.3.6.1.4.1.562.36.2.1.95.3.386.1
An entry in the mscARtgPnniOptMetricTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniOptMetricEntry  

mscARtgPnniOptMetricIndex 1.3.6.1.4.1.562.36.2.1.95.3.386.1.1
This variable represents the mscARtgPnniOptMetricTable specific index for the mscARtgPnniOptMetricTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER cbr(1), rtVbr(2), nrtVbr(3), ubr(4)  

mscARtgPnniOptMetricValue 1.3.6.1.4.1.562.36.2.1.95.3.386.1.2
This variable represents an individual value for the mscARtgPnniOptMetricTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cdv(0), maxCtd(1), aw(2)  

mscARtgPnniRf 1.3.6.1.4.1.562.36.2.1.95.3.2
OBJECT IDENTIFIER    

mscARtgPnniRfRowStatusTable 1.3.6.1.4.1.562.36.2.1.95.3.2.1
This entry controls the addition and deletion of mscARtgPnniRf components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniRfRowStatusEntry

mscARtgPnniRfRowStatusEntry 1.3.6.1.4.1.562.36.2.1.95.3.2.1.1
A single entry in the table represents a single mscARtgPnniRf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniRfRowStatusEntry  

mscARtgPnniRfRowStatus 1.3.6.1.4.1.562.36.2.1.95.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscARtgPnniRf components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscARtgPnniRfComponentName 1.3.6.1.4.1.562.36.2.1.95.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscARtgPnniRfStorageType 1.3.6.1.4.1.562.36.2.1.95.3.2.1.1.4
This variable represents the storage type value for the mscARtgPnniRf tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscARtgPnniRfIndex 1.3.6.1.4.1.562.36.2.1.95.3.2.1.1.10
This variable represents the index for the mscARtgPnniRf tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscARtgPnniRfCriteriaTable 1.3.6.1.4.1.562.36.2.1.95.3.2.10
This group contains the attributes specifying the routing criteria for the route computation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniRfCriteriaEntry

mscARtgPnniRfCriteriaEntry 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1
An entry in the mscARtgPnniRfCriteriaTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniRfCriteriaEntry  

mscARtgPnniRfDestinationAddress 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.1
This attribute specifies the destination NSAP address to be used for the computation. If this attribute specifies an invalid address then no routes will be found.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(1..20)  

mscARtgPnniRfMaxRoutes 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.2
This attribute specifies a ceiling on the number of routes to be computed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

mscARtgPnniRfTxTrafficDescType 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.3
This attribute specifies the type of traffic management which is applied to the transmit direction as defined in the ATM Forum. The txTrafficDescType determines the number and meaning of the parameters in the txTrafficDescParm attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8)  

mscARtgPnniRfRxTrafficDescType 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.5
This attribute specifies the type of traffic management which is applied to the receive direction of this connection as defined in the ATM Forum. The rxTrafficDescType determines the number and meaning of the parameters in the rxTrafficDescParm attribute When sameAsTx is selected, the rxTrafficDescType as well as the rxTrafficDescParm are taken from the transmit values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), sameAsTx(15)  

mscARtgPnniRfAtmServiceCategory 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.6
This attribute specifies the ATM service category for both directions of the connection. If this attribute is set to derivedFromBBC, the Broadband Bearer Capability (BBC) and bestEffort attributes are used to determine the atmServiceCategory of this connection. If this attribute is set to other than derivedFromBBC, the value of this attribute is used to override the provisioned BBC IE parameters. In those cases, the BBC attributes are not used. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. VBR real time service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. VBR non-real time service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3), derivedFromBBC(15)  

mscARtgPnniRfFwdQosClass 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.10
This attribute specifies the quality of service for the forward direction for this connection. Class 1 supports a QOS that will meet Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that will meet Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that will meet Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that will meet Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

mscARtgPnniRfBwdQosClass 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.11
This attribute specifies the quality of service for the backward direction for this connection. Class 1 supports a QOS that will meet Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that will meet Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that will meet Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that will meet Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters. The sameAsFwd selection sets the backward quality of service to be the same as the forward quality of service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), sameAsFwd(15)  

mscARtgPnniRfBearerClassBbc 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.12
This attribute specifies the bearer capability. It is one of the Broadband Bearer Capability (BBC) attributes. The purpose of the BBC information element is to indicate a requested broadband connection-oriented bearer service to be provided by the network. The value derivedFromServiceCategory specifies that the actual value which is used for this connection is derived from the value of the atmServiceCategory. Either, this attribute must be set to derivedFromServiceCategory, or the atmServiceCategory attribute must be set to derivedFromBBC, but not both. Class a service is a connection-oriented, constant bit rate ATM transport service. Class a service has end to end timing requirements and may require stringent cell loss, cell delay and cell delay variation performance.When a is set, the user is requesting more than an ATM only service. The network may look at the AAL to provide interworking based upon its contents. Class c service is a connection-oriented, variable bit rate ATM transport service. Class c service has no end-to-end timing requirements. When c is set, the user is requesting more than an ATM only service. The network interworking function may look at the AAL and provide service based on it. Class x service is a connection-oriented ATM transport service where the AAL, trafficType (vbr or cbr) and timing requirements are user defined (that is, transparent to the network).When x is set the user is requesting an ATM only service from the network. In this case, the network shall not process any higher layer protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER a(1), c(3), x(16), derivedFromServiceCategory(31)  

mscARtgPnniRfTransferCapabilityBbc 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.13
This attribute specifies the transfer capability for this connection. Uni 3.0/3.1 traffic type and end-to-end timing parameters are mapped into this parameter as follows: 0 : NoIndication, NoIndication 1 : NoIndication, yes 2 : NoIndication, no 5 : CBR, yes 8 : VBR, NoIndication 9 : VBR, yes 10: VBR, no NotApplicable specifies that the user does not want to specify the transfer capability. The CBR traffic type refers to traffic offered on services such as a constant bit rate video service or a circuit emulation. The VBR traffic type refers to traffic offered on services such as packetized audio and video, or data. The value NoIndication for traffic type is used if the user has not set the traffic type; this is also the case for end-to-end timing. The value yes for end-to-end timing indicates that end-to-end timing is required. The value no for end-to-end timing indicates that end-to-end timing is not required. The value derivedFromServiceCategory specifies that the actual value which is used for this connection is derived from the value of the atmServiceCategory. Either, this attribute must be set to derivedFromServiceCategory, or the atmServiceCategory attribute must be set to derivedFromBBC, but not both.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n5(5), n8(8), n9(9), n10(10), notApplicable(30), derivedFromServiceCategory(31)  

mscARtgPnniRfClippingBbc 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.14
This attribute specifies the value for the clipping susceptibility parameter in the BBC IE. This attribute is only used for SPVC connections. It is one of the Broadband Bearer Capability attributes. Clipping is an impairment in which the first fraction of a second of information to be transferred is lost. It occurs after a call is answered and before an associated connection is switched through.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscARtgPnniRfBestEffort 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.15
This attribute specifies the value of the best effort parameter in the ATM Traffic Descriptor IE. It is one of the Broadband Bearer Capability attributes. The value indicated implies that the quality of service for this connection is not guaranteed. The value notIndicated implies that the quality of service for this connection is guaranteed. The value derivedFromServiceCategory specifies that the actual value which is used for this connection is derived from the value of the atmServiceCategory. Either, this attribute must be set to derivedFromServiceCategory, or the atmServiceCategory attribute must be set to derivedFromBBC, but not both. DESCRIPTION
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER indicated(0), notIndicated(1), derivedFromServiceCategory(15)  

mscARtgPnniRfOptimizationMetric 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.16
This attribute specifies the optimization metric to be used in the route computation; one of cell delay variation (cdv), maximum cell transfer delay (maxCtd), or administrative weight (aw).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cdv(0), maxCtd(1), aw(2)  

mscARtgPnniRfRxTdpTable 1.3.6.1.4.1.562.36.2.1.95.3.2.388
This attribute is a vector of four traffic parameters whose meanings are defined by the rxTrafficDescType attribute. The values of peak cell rate (PCR) and sustained cell rate (SCR) are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. The value of CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for usage parameter control (UPC). When rxTrafficDescType is 1 or 2, all of the parameters must be set to zero (unused). When rxTrafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic. Parameter 1 must be non-zero. Parameters 2 and 3 must be set to zero (unused). When rxTrafficDescType is 4, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell discard. Parameters 1 and 2 must be non-zero. Parameter 3 must be set to zero (unused). Parameter 1 must be greater than or equal to parameter 2. When rxTrafficDescType is 5, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell tagging. Parameters 1 and 2 must be non-zero. Parameter 3 must be set to zero (unused). Parameter 1 must be greater than or equal to parameter 2. When rxTrafficDescType is a 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic. Parameters 1, 2 and 3 must be non- zero. Parameter 1 must be greater than or equal to Parameter 2. When rxTrafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic. Parameters 1, 2 and 3 must be non- zero. Parameter 1 must be greater than or equal to parameter 2. When rxTrafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic. Parameter 1, 2 and 3 must be non- zero. Parameter 1 must be greater than or equal to parameter 2. When rxTrafficDescType is any value from 3 through 8, parameter 4 represents the CDVT. If this value is zero, the CDVT is taken from the ConnectionAdministrator defaults for the particular atmServiceCategory of this connection. When rxTrafficDescriptorType is 3 through 8, there are certain extreme combinations of rxTrafficDescParm which are outside the capabilities of the UPC hardware. To calculate the limits, use the following formulae: I1 = 1 000 000 000 / PCR L1 = CDVT * 1000 I2 = 1 000 000 000 / SCR L2 = CDVT + (MBS - 1) * (I2 - I1) I1 and I2 must be less than or equal to 335 523 840. I1 + L1 must be less than or equal to 1 342 156 800. I2 + L2 must be less than or equal to 1 342 156 800. Note that I2 and L2 only apply when the rxTrafficDescriptorType is 6 through 8. If the values of I1, L1, I2 or L2 are closer to the limits described above, a further restriction applies. Specifically, if either: I1 > 41 940 480 or I2 > 41 940 480 or I1 + L1 > 167 769 600 or I2 + L2 > 167 769 600 then both I1 and I2 must be greater than 20 480. Parameter 5 of the rxTrafficDescParm is always unused. If the rxTrafficDescType is sameAsTx, the values in this attribute will be taken from the txTrafficDescParm.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniRfRxTdpEntry

mscARtgPnniRfRxTdpEntry 1.3.6.1.4.1.562.36.2.1.95.3.2.388.1
An entry in the mscARtgPnniRfRxTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniRfRxTdpEntry  

mscARtgPnniRfRxTdpIndex 1.3.6.1.4.1.562.36.2.1.95.3.2.388.1.1
This variable represents the mscARtgPnniRfRxTdpTable specific index for the mscARtgPnniRfRxTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..5  

mscARtgPnniRfRxTdpValue 1.3.6.1.4.1.562.36.2.1.95.3.2.388.1.2
This variable represents an individual value for the mscARtgPnniRfRxTdpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscARtgPnniRfTxTdpTable 1.3.6.1.4.1.562.36.2.1.95.3.2.389
This attribute is a vector of five traffic parameters whose meanings are defined by the txTrafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When txTrafficDescType is 1 or 2, all of the parameters must be set to zero. When txTrafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When txTrafficDescType is 4, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic with cell discard; parameter 2 represents the PCR for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be greater than or equal to parameter 2. Parameters 1 and 2 must be non-zero. Parameter 3 must be zero. When txTrafficDescType is 5, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic with cell tagging; parameter 2 represents the PCR for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be greater than or equal to parameter 2. Parameters 1 and 2 must be non-zero. Parameter 3 must be zero. When txTrafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5, must either be zero (unused) or greater than or equal to parameter 2. When txTrafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5, must either be zero (unused) or greater than or equal to parameter 2. When txTrafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5, must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For txTrafficDescType 3, 4 and 5, the transmit traffic will be shaped at the next rate less than the PCR. For txTrafficDescType 6, 7 and 8, the transmit traffic will be shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic will be shaped at the next rate above the PCR.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniRfTxTdpEntry

mscARtgPnniRfTxTdpEntry 1.3.6.1.4.1.562.36.2.1.95.3.2.389.1
An entry in the mscARtgPnniRfTxTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniRfTxTdpEntry  

mscARtgPnniRfTxTdpIndex 1.3.6.1.4.1.562.36.2.1.95.3.2.389.1.1
This variable represents the mscARtgPnniRfTxTdpTable specific index for the mscARtgPnniRfTxTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..5  

mscARtgPnniRfTxTdpValue 1.3.6.1.4.1.562.36.2.1.95.3.2.389.1.2
This variable represents an individual value for the mscARtgPnniRfTxTdpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscARtgPnniRfFqpTable 1.3.6.1.4.1.562.36.2.1.95.3.2.390
This attribute is a vector of three elements that specify the quality of service parameters for the forward direction for this connection. This attribute is used for SPVC connections. The cdv element specifies the acceptable peak-to-peak Cell Delay Variation (CDV) of real-time connections (CBR, and rt-VBR). It is signalled through the extended QoS information element. The ctd specifies the acceptable maximum Cell Transfer Delay (maxCtd) of real-time connections (CBR, and rt-VBR). It is signalled through the end to end transit delay information element. The clr specifies the acceptable Cell Loss Ratio (CLR) of CBR, rt- VBR, and nrt-VBR connections. It is signalled through the extended QoS information element.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniRfFqpEntry

mscARtgPnniRfFqpEntry 1.3.6.1.4.1.562.36.2.1.95.3.2.390.1
An entry in the mscARtgPnniRfFqpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniRfFqpEntry  

mscARtgPnniRfFqpIndex 1.3.6.1.4.1.562.36.2.1.95.3.2.390.1.1
This variable represents the mscARtgPnniRfFqpTable specific index for the mscARtgPnniRfFqpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER cdv(0), ctd(1), clr(2)  

mscARtgPnniRfFqpValue 1.3.6.1.4.1.562.36.2.1.95.3.2.390.1.2
This variable represents an individual value for the mscARtgPnniRfFqpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscARtgPnniRfBqpTable 1.3.6.1.4.1.562.36.2.1.95.3.2.393
This attribute is a vector of three elements that specify the quality of service parameters for the backward direction for this connection. This attribute is used for SPVC connections. The cdv element specifies the acceptable peak-to-peak Cell Delay Variation (CDV) of real-time connections (CBR, and rt-VBR). It is signalled through the extended QoS information element. The ctd specifies the acceptable maximum Cell Transfer Delay (maxCtd) of real-time connections (CBR, and rt-VBR). It is signalled through the end to end transit delay information element. The clr specifies the acceptable Cell Loss Ratio (CLR) of CBR, rt- VBR, and nrt-VBR connections. It is signalled through the extended QoS information element.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniRfBqpEntry

mscARtgPnniRfBqpEntry 1.3.6.1.4.1.562.36.2.1.95.3.2.393.1
An entry in the mscARtgPnniRfBqpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniRfBqpEntry  

mscARtgPnniRfBqpIndex 1.3.6.1.4.1.562.36.2.1.95.3.2.393.1.1
This variable represents the mscARtgPnniRfBqpTable specific index for the mscARtgPnniRfBqpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER cdv(0), ctd(1), clr(2)  

mscARtgPnniRfBqpValue 1.3.6.1.4.1.562.36.2.1.95.3.2.393.1.2
This variable represents an individual value for the mscARtgPnniRfBqpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscARtgPnniCfgNode 1.3.6.1.4.1.562.36.2.1.95.3.3
OBJECT IDENTIFIER    

mscARtgPnniCfgNodeRowStatusTable 1.3.6.1.4.1.562.36.2.1.95.3.3.1
This entry controls the addition and deletion of mscARtgPnniCfgNode components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniCfgNodeRowStatusEntry

mscARtgPnniCfgNodeRowStatusEntry 1.3.6.1.4.1.562.36.2.1.95.3.3.1.1
A single entry in the table represents a single mscARtgPnniCfgNode component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniCfgNodeRowStatusEntry  

mscARtgPnniCfgNodeRowStatus 1.3.6.1.4.1.562.36.2.1.95.3.3.1.1.1
This variable is used as the basis for SNMP naming of mscARtgPnniCfgNode components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscARtgPnniCfgNodeComponentName 1.3.6.1.4.1.562.36.2.1.95.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscARtgPnniCfgNodeStorageType 1.3.6.1.4.1.562.36.2.1.95.3.3.1.1.4
This variable represents the storage type value for the mscARtgPnniCfgNode tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscARtgPnniCfgNodeIndex 1.3.6.1.4.1.562.36.2.1.95.3.3.1.1.10
This variable represents the index for the mscARtgPnniCfgNode tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..104  

mscARtgPnniCfgNodeProvTable 1.3.6.1.4.1.562.36.2.1.95.3.3.10
This group contains the provisionable attributes of a ConfiguredNode component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniCfgNodeProvEntry

mscARtgPnniCfgNodeProvEntry 1.3.6.1.4.1.562.36.2.1.95.3.3.10.1
An entry in the mscARtgPnniCfgNodeProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniCfgNodeProvEntry  

mscARtgPnniCfgNodeNodeId 1.3.6.1.4.1.562.36.2.1.95.3.3.10.1.2
This attribute specifies the node id of the configured node. If this attribute is set to null, then the node id is computed as follows: If this is the lowest configured node, then the node id is computed as the level (one octet), followed by the integer value 160 (one octet), followed by the node address (20 octets). If this is not the lowest configured node, then the node id is computed as the level (one octet), followed by the 14 octet peer group id of the child peer group which the LGN represents, followed by the ESI specified in the node address (6 octets), followed by the integer value 0 (one octet).
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..22)  

mscARtgPnniCfgNodePeerGroupId 1.3.6.1.4.1.562.36.2.1.95.3.3.10.1.3
This attribute allows the peer group id of the Logical Group Node (LGN) to be set. The peer group id is specified by 28 hex digits where the first octet represents the level of the node and the remaining 13 octets form the End System Address. If this attribute is set to the null string then the peer group id is computed as follows: The peer group id for a lowest level node is computed to be the node's level (one octet), followed by the first bits of the node's address, followed by zero or more padding 0 bits. The peer group id for an LGN is computed to be the LGN's level (one octet), followed by the first bits of the id of the peer group which this LGN represents.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..14)  

mscARtgPnniCfgNodeOperTable 1.3.6.1.4.1.562.36.2.1.95.3.3.11
This group contains the generic operational attributes of a ConfiguredNode component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniCfgNodeOperEntry

mscARtgPnniCfgNodeOperEntry 1.3.6.1.4.1.562.36.2.1.95.3.3.11.1
An entry in the mscARtgPnniCfgNodeOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniCfgNodeOperEntry  

mscARtgPnniCfgNodeNodeAddress 1.3.6.1.4.1.562.36.2.1.95.3.3.11.1.1
This attribute indicates the address of the node at this level. At the lowest level, the nodeAddress is determined by the value of the nodeAddressPrefix attribute for the ARtg Pnni component followed by the level of this CfgNode. For LGNs, the nodeAddress is the same as the nodeAddress of the node at the lowest level, with the selector field set to the level of the peer group containing the LGN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(20)  

mscARtgPnniCfgNodeOpNodeId 1.3.6.1.4.1.562.36.2.1.95.3.3.11.1.2
This attribute indicates the node id of the node at this level. The default node id is computed as follows: If this is the lowest level node, then the default node id is computed as the level (one octet), followed by the integer value 160 (one octet), followed by the node address (20 octets). If this is not the lowest level node, then the default node id is computed as the level (one octet), followed by the 14 octet peer group id of the child peer group which the LGN represents, followed by the ESI specified in the node address (6 octets), followed by the integer value 0 (one octet).
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(22)  

mscARtgPnniCfgNodeOpPeerGroupId 1.3.6.1.4.1.562.36.2.1.95.3.3.11.1.3
This attribute indicates the peer group id of the node at this level. The value is determined by the provisioned peerGroupId attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(14)  

mscARtgPnniCfgNodeNumNeighbors 1.3.6.1.4.1.562.36.2.1.95.3.3.11.1.4
This attribute indicates the number of PNNI nodes which are neighbors of this node at this level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscARtgPnniCfgNodeNumRccs 1.3.6.1.4.1.562.36.2.1.95.3.3.11.1.5
This attribute indicates the number of Routing Control Channels to this node's neighbors at this level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscARtgPnniCfgNodeCurrentLeadershipPriority 1.3.6.1.4.1.562.36.2.1.95.3.3.11.1.6
This attribute indicates the leadership priority of the node that this node believes should be the peer group leader at this point in time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..205  

mscARtgPnniCfgNodePglElectionState 1.3.6.1.4.1.562.36.2.1.95.3.3.11.1.7
This attribute indicates the current state of the peer group leader election process. The following are the possible values for this attribute: starting: the initial state of the state machine. awaiting: the node has started the Hello Finite State Machine on at least one link, and no peer has been found yet. awaitingFull: no database synchronization process has been completed yet but at least one neighboring peer has been found. initialDelay: Database synchronization has been completed with at least one neighboring peer. The node must wait pglInitTime second before it can select and advertise its preferred Peer Group Leader (PGL). calculating: the node is in the process of calculating what its new choice for preferred PGL will be. operNotPgl: a non PGL node is in the process of determining which node has the highest priority to be PGL by examining PTSEs sent by other nodes. operPgl: a PGL node is in the process of determining if another node has a higher priority than itself by examining PTSEs sent by other nodes. awaitUnanimity: the node has chosen itself as PGL. If the node has been elected unanimously, it generates a Unanimity event. It waits for unanimity or expiration of the overrideDelay timer before declaring itself peer group leader. hungElection: the node has chosen itself as PGL with less than 2/3 of the other nodes advertising it as their preferred PGL. In this case either this node should change its choice of preferred PGL, or the other nodes are going to accept it as PGL. awaitReElection: the node has lost connectivity to the current PGL. The connectivity must be reestablished before the reElectionInterval timer fires, otherwise the election is redone.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER starting(0), awaiting(1), awaitingFull(2), initialDelay(3), calculating(4), operNotPgl(5), operPgl(6), awaitUnanimity(7), hungElection(8), awaitReElection(9)  

mscARtgPnniCfgNodeSAddr 1.3.6.1.4.1.562.36.2.1.95.3.3.2
OBJECT IDENTIFIER    

mscARtgPnniCfgNodeSAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.95.3.3.2.1
This entry controls the addition and deletion of mscARtgPnniCfgNodeSAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniCfgNodeSAddrRowStatusEntry

mscARtgPnniCfgNodeSAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.95.3.3.2.1.1
A single entry in the table represents a single mscARtgPnniCfgNodeSAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniCfgNodeSAddrRowStatusEntry  

mscARtgPnniCfgNodeSAddrRowStatus 1.3.6.1.4.1.562.36.2.1.95.3.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscARtgPnniCfgNodeSAddr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscARtgPnniCfgNodeSAddrComponentName 1.3.6.1.4.1.562.36.2.1.95.3.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscARtgPnniCfgNodeSAddrStorageType 1.3.6.1.4.1.562.36.2.1.95.3.3.2.1.1.4
This variable represents the storage type value for the mscARtgPnniCfgNodeSAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscARtgPnniCfgNodeSAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.95.3.3.2.1.1.10
This variable represents an index for the mscARtgPnniCfgNodeSAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HexString Size(19)  

mscARtgPnniCfgNodeSAddrPrefixLengthIndex 1.3.6.1.4.1.562.36.2.1.95.3.3.2.1.1.11
This variable represents an index for the mscARtgPnniCfgNodeSAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..152  

mscARtgPnniCfgNodeSAddrReachabilityIndex 1.3.6.1.4.1.562.36.2.1.95.3.3.2.1.1.12
This variable represents an index for the mscARtgPnniCfgNodeSAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

mscARtgPnniCfgNodeSAddrProvTable 1.3.6.1.4.1.562.36.2.1.95.3.3.2.10
This group contains the provisionable attributes of a SummaryAddress component. A summary address is an abbreviation of a set of addresses, represented by an address prefix that all of the summarized addresses have in common. A suppressed summary address is used to suppress the advertisement of addresses which match this prefix, regardless of scope.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniCfgNodeSAddrProvEntry

mscARtgPnniCfgNodeSAddrProvEntry 1.3.6.1.4.1.562.36.2.1.95.3.3.2.10.1
An entry in the mscARtgPnniCfgNodeSAddrProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniCfgNodeSAddrProvEntry  

mscARtgPnniCfgNodeSAddrSuppress 1.3.6.1.4.1.562.36.2.1.95.3.3.2.10.1.2
This attribute specifies whether or not the address should be suppressed. If this attribute is set to true, then all addresses matching that prefix will not be advertised above this level.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscARtgPnniCfgNodeSAddrOperTable 1.3.6.1.4.1.562.36.2.1.95.3.3.2.11
This group contains the operational attributes of a SummaryAddress component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniCfgNodeSAddrOperEntry

mscARtgPnniCfgNodeSAddrOperEntry 1.3.6.1.4.1.562.36.2.1.95.3.3.2.11.1
An entry in the mscARtgPnniCfgNodeSAddrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniCfgNodeSAddrOperEntry  

mscARtgPnniCfgNodeSAddrState 1.3.6.1.4.1.562.36.2.1.95.3.3.2.11.1.1
This attribute indicates the state of the address: one of advertising, suppressing or inactive. inactive: the summary address has been configured but is not suppressing or summarizing any ATM addresses. suppressing: the summary address has suppressed at least one ATM address on the node. advertising: the summary address is summarizing at least one ATM address on the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER advertising(0), suppressing(1), inactive(2)  

mscARtgPnniCfgNodeSAddrScope 1.3.6.1.4.1.562.36.2.1.95.3.3.2.11.1.2
This attribute indicates the scope of the summary address. The scope corresponds to the scope of the underlying summarized address with the highest advertised scope. A value of -1 means the scope is unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..104  

mscARtgPnniCfgNodeNbr 1.3.6.1.4.1.562.36.2.1.95.3.3.3
OBJECT IDENTIFIER    

mscARtgPnniCfgNodeNbrRowStatusTable 1.3.6.1.4.1.562.36.2.1.95.3.3.3.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscARtgPnniCfgNodeNbr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniCfgNodeNbrRowStatusEntry

mscARtgPnniCfgNodeNbrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.95.3.3.3.1.1
A single entry in the table represents a single mscARtgPnniCfgNodeNbr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniCfgNodeNbrRowStatusEntry  

mscARtgPnniCfgNodeNbrRowStatus 1.3.6.1.4.1.562.36.2.1.95.3.3.3.1.1.1
This variable is used as the basis for SNMP naming of mscARtgPnniCfgNodeNbr components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscARtgPnniCfgNodeNbrComponentName 1.3.6.1.4.1.562.36.2.1.95.3.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscARtgPnniCfgNodeNbrStorageType 1.3.6.1.4.1.562.36.2.1.95.3.3.3.1.1.4
This variable represents the storage type value for the mscARtgPnniCfgNodeNbr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscARtgPnniCfgNodeNbrIndex 1.3.6.1.4.1.562.36.2.1.95.3.3.3.1.1.10
This variable represents the index for the mscARtgPnniCfgNodeNbr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HexString Size(22)  

mscARtgPnniCfgNodeNbrOperTable 1.3.6.1.4.1.562.36.2.1.95.3.3.3.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of a Neighbor component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniCfgNodeNbrOperEntry

mscARtgPnniCfgNodeNbrOperEntry 1.3.6.1.4.1.562.36.2.1.95.3.3.3.10.1
An entry in the mscARtgPnniCfgNodeNbrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniCfgNodeNbrOperEntry  

mscARtgPnniCfgNodeNbrPeerState 1.3.6.1.4.1.562.36.2.1.95.3.3.3.10.1.2
This attribute indicates the state of the routing database exchange with the peer node. npDown: there are no active links (i.e. in the twoWayInside Hello state) to the neighboring peer. negotiating: the first step in creating an adjacency between the two neighboring peers; this step determines which node is the master, and what the initial DS sequence number will be. exchanging: the node describes its topology database by sending Database Summary packets to the neighboring peer. loading: a full sequence of Database Summary packets has been exchanged with the neighboring peer, and the required PTSEs are requested and at least one has not yet been received. full: All PTSEs known to be available have been received from the neighboring peer. At this point the all ports leading to the neighbor node will be flooded in PTSEs within the peer group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER npDown(0), negotiating(1), exchanging(2), loading(3), full(4)  

mscARtgPnniCfgNodeNbrStatsTable 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the statistical operational attributes of a Neighbor component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniCfgNodeNbrStatsEntry

mscARtgPnniCfgNodeNbrStatsEntry 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11.1
An entry in the mscARtgPnniCfgNodeNbrStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniCfgNodeNbrStatsEntry  

mscARtgPnniCfgNodeNbrPtspRx 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11.1.1
This attribute counts the PNNI Topology State Packets received from the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniCfgNodeNbrPtspTx 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11.1.2
This attribute counts the total number of PTSPs send to the neighbor node.The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniCfgNodeNbrPtseRx 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11.1.3
This attribute counts the total number of PTSEs received from the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniCfgNodeNbrPtseTx 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11.1.4
This attribute counts the total number of PTSEs sent to the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniCfgNodeNbrPtseReqRx 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11.1.5
This attribute counts the total number of PTSE requests received from the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniCfgNodeNbrPtseReqTx 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11.1.6
This attribute counts the total number of PTSE requests sent to the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniCfgNodeNbrPtseAcksRx 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11.1.7
This attribute counts the total number of PTSE acknowledgments received from the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniCfgNodeNbrPtseAcksTx 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11.1.8
This attribute counts the total number of PTSE acknowledgments sent to the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniCfgNodeNbrDbSummariesRx 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11.1.9
This attribute counts the number of database summary packets received from the neighbor. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniCfgNodeNbrDbSummariesTx 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11.1.10
This attribute counts the number of database summary packets transmitted to the neighbor. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniCfgNodeNbrBadPtspRx 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11.1.11
This attribute counts the total number of invalid PTSP packets received from the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniCfgNodeNbrBadPtseRx 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11.1.12
This attribute counts the total number of invalid PTSE packets received to the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniCfgNodeNbrBadPtseReqRx 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11.1.13
This attribute counts the total number of invalid PTSE requests received from the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniCfgNodeNbrBadPtseAckRx 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11.1.14
This attribute counts the total number of invalid PTSE acknowledgments received from the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniCfgNodeNbrBadDbSummariesRx 1.3.6.1.4.1.562.36.2.1.95.3.3.3.11.1.15
This attribute counts the total number of invalid database summary packets received from the neighbor. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscARtgPnniCfgNodeNbrRccListTable 1.3.6.1.4.1.562.36.2.1.95.3.3.3.385
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the component names of all Routing Control Channels to the neighbor PNNI node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniCfgNodeNbrRccListEntry

mscARtgPnniCfgNodeNbrRccListEntry 1.3.6.1.4.1.562.36.2.1.95.3.3.3.385.1
An entry in the mscARtgPnniCfgNodeNbrRccListTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniCfgNodeNbrRccListEntry  

mscARtgPnniCfgNodeNbrRccListValue 1.3.6.1.4.1.562.36.2.1.95.3.3.3.385.1.1
This variable represents both the value and the index for the mscARtgPnniCfgNodeNbrRccListTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

mscARtgPnniCfgNodeDefSAddr 1.3.6.1.4.1.562.36.2.1.95.3.3.4
OBJECT IDENTIFIER    

mscARtgPnniCfgNodeDefSAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.95.3.3.4.1
This entry controls the addition and deletion of mscARtgPnniCfgNodeDefSAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniCfgNodeDefSAddrRowStatusEntry

mscARtgPnniCfgNodeDefSAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.95.3.3.4.1.1
A single entry in the table represents a single mscARtgPnniCfgNodeDefSAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniCfgNodeDefSAddrRowStatusEntry  

mscARtgPnniCfgNodeDefSAddrRowStatus 1.3.6.1.4.1.562.36.2.1.95.3.3.4.1.1.1
This variable is used as the basis for SNMP naming of mscARtgPnniCfgNodeDefSAddr components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscARtgPnniCfgNodeDefSAddrComponentName 1.3.6.1.4.1.562.36.2.1.95.3.3.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscARtgPnniCfgNodeDefSAddrStorageType 1.3.6.1.4.1.562.36.2.1.95.3.3.4.1.1.4
This variable represents the storage type value for the mscARtgPnniCfgNodeDefSAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscARtgPnniCfgNodeDefSAddrIndex 1.3.6.1.4.1.562.36.2.1.95.3.3.4.1.1.10
This variable represents the index for the mscARtgPnniCfgNodeDefSAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscARtgPnniCfgNodeDefSAddrDefAddrTable 1.3.6.1.4.1.562.36.2.1.95.3.3.4.10
This group contains the operational attributes of a DefSummaryAddress component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniCfgNodeDefSAddrDefAddrEntry

mscARtgPnniCfgNodeDefSAddrDefAddrEntry 1.3.6.1.4.1.562.36.2.1.95.3.3.4.10.1
An entry in the mscARtgPnniCfgNodeDefSAddrDefAddrTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniCfgNodeDefSAddrDefAddrEntry  

mscARtgPnniCfgNodeDefSAddrAddress 1.3.6.1.4.1.562.36.2.1.95.3.3.4.10.1.1
This attribute indicates the default summary address of the node at this level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(13)  

mscARtgPnniCfgNodeDefSAddrOperTable 1.3.6.1.4.1.562.36.2.1.95.3.3.4.11
This group contains the operational attributes of a SummaryAddress component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniCfgNodeDefSAddrOperEntry

mscARtgPnniCfgNodeDefSAddrOperEntry 1.3.6.1.4.1.562.36.2.1.95.3.3.4.11.1
An entry in the mscARtgPnniCfgNodeDefSAddrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniCfgNodeDefSAddrOperEntry  

mscARtgPnniCfgNodeDefSAddrState 1.3.6.1.4.1.562.36.2.1.95.3.3.4.11.1.1
This attribute indicates the state of the address: one of advertising, suppressing or inactive. inactive: the summary address has been configured but is not suppressing or summarizing any ATM addresses. suppressing: the summary address has suppressed at least one ATM address on the node. advertising: the summary address is summarizing at least one ATM address on the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER advertising(0), suppressing(1), inactive(2)  

mscARtgPnniCfgNodeDefSAddrScope 1.3.6.1.4.1.562.36.2.1.95.3.3.4.11.1.2
This attribute indicates the scope of the summary address. The scope corresponds to the scope of the underlying summarized address with the highest advertised scope. A value of -1 means the scope is unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..104  

mscARtgPnniTop 1.3.6.1.4.1.562.36.2.1.95.3.4
OBJECT IDENTIFIER    

mscARtgPnniTopRowStatusTable 1.3.6.1.4.1.562.36.2.1.95.3.4.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscARtgPnniTop components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniTopRowStatusEntry

mscARtgPnniTopRowStatusEntry 1.3.6.1.4.1.562.36.2.1.95.3.4.1.1
A single entry in the table represents a single mscARtgPnniTop component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniTopRowStatusEntry  

mscARtgPnniTopRowStatus 1.3.6.1.4.1.562.36.2.1.95.3.4.1.1.1
This variable is used as the basis for SNMP naming of mscARtgPnniTop components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscARtgPnniTopComponentName 1.3.6.1.4.1.562.36.2.1.95.3.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscARtgPnniTopStorageType 1.3.6.1.4.1.562.36.2.1.95.3.4.1.1.4
This variable represents the storage type value for the mscARtgPnniTop tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscARtgPnniTopIndex 1.3.6.1.4.1.562.36.2.1.95.3.4.1.1.10
This variable represents the index for the mscARtgPnniTop tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..104  

mscARtgPnniTopOperTable 1.3.6.1.4.1.562.36.2.1.95.3.4.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of a Topology component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniTopOperEntry

mscARtgPnniTopOperEntry 1.3.6.1.4.1.562.36.2.1.95.3.4.10.1
An entry in the mscARtgPnniTopOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniTopOperEntry  

mscARtgPnniTopPtsesInDatabase 1.3.6.1.4.1.562.36.2.1.95.3.4.10.1.1
This attribute indicates the number of PTSEs in storage in this node's topology database for this level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscARtgPnniTopPglNodeId 1.3.6.1.4.1.562.36.2.1.95.3.4.10.1.2
This attribute indicates the node id of the peer group leader. If this attribute is empty, it indicates the Peer Group Level node id is unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(0..22)  

mscARtgPnniTopActiveParentNodeId 1.3.6.1.4.1.562.36.2.1.95.3.4.10.1.3
This attribute indicates the node identifier being used by the LGN representing this peer group at the next higher level peer group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(0..22)  

mscARtgPnniTopPreferredPglNodeId 1.3.6.1.4.1.562.36.2.1.95.3.4.10.1.4
This attribute represents the node in database with the highest Peer Group Level (PGL) priority. If this attribute is empty, it indicates the preferred PGL node id is unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(0..22)  

mscARtgPnniTopNode 1.3.6.1.4.1.562.36.2.1.95.3.4.2
OBJECT IDENTIFIER    

mscARtgPnniTopNodeRowStatusTable 1.3.6.1.4.1.562.36.2.1.95.3.4.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscARtgPnniTopNode components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniTopNodeRowStatusEntry

mscARtgPnniTopNodeRowStatusEntry 1.3.6.1.4.1.562.36.2.1.95.3.4.2.1.1
A single entry in the table represents a single mscARtgPnniTopNode component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniTopNodeRowStatusEntry  

mscARtgPnniTopNodeRowStatus 1.3.6.1.4.1.562.36.2.1.95.3.4.2.1.1.1
This variable is used as the basis for SNMP naming of mscARtgPnniTopNode components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscARtgPnniTopNodeComponentName 1.3.6.1.4.1.562.36.2.1.95.3.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscARtgPnniTopNodeStorageType 1.3.6.1.4.1.562.36.2.1.95.3.4.2.1.1.4
This variable represents the storage type value for the mscARtgPnniTopNode tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscARtgPnniTopNodeIndex 1.3.6.1.4.1.562.36.2.1.95.3.4.2.1.1.10
This variable represents the index for the mscARtgPnniTopNode tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HexString Size(22)  

mscARtgPnniTopNodeAddr 1.3.6.1.4.1.562.36.2.1.95.3.4.2.2
OBJECT IDENTIFIER    

mscARtgPnniTopNodeAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.95.3.4.2.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscARtgPnniTopNodeAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniTopNodeAddrRowStatusEntry

mscARtgPnniTopNodeAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.95.3.4.2.2.1.1
A single entry in the table represents a single mscARtgPnniTopNodeAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniTopNodeAddrRowStatusEntry  

mscARtgPnniTopNodeAddrRowStatus 1.3.6.1.4.1.562.36.2.1.95.3.4.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscARtgPnniTopNodeAddr components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscARtgPnniTopNodeAddrComponentName 1.3.6.1.4.1.562.36.2.1.95.3.4.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscARtgPnniTopNodeAddrStorageType 1.3.6.1.4.1.562.36.2.1.95.3.4.2.2.1.1.4
This variable represents the storage type value for the mscARtgPnniTopNodeAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscARtgPnniTopNodeAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.95.3.4.2.2.1.1.10
This variable represents an index for the mscARtgPnniTopNodeAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HexString Size(19)  

mscARtgPnniTopNodeAddrPrefixLengthIndex 1.3.6.1.4.1.562.36.2.1.95.3.4.2.2.1.1.11
This variable represents an index for the mscARtgPnniTopNodeAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..152  

mscARtgPnniTopNodeAddrReachabilityIndex 1.3.6.1.4.1.562.36.2.1.95.3.4.2.2.1.1.12
This variable represents an index for the mscARtgPnniTopNodeAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

mscARtgPnniTopNodeAddrOperTable 1.3.6.1.4.1.562.36.2.1.95.3.4.2.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute group contains the operational attributes for the Address component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniTopNodeAddrOperEntry

mscARtgPnniTopNodeAddrOperEntry 1.3.6.1.4.1.562.36.2.1.95.3.4.2.2.10.1
An entry in the mscARtgPnniTopNodeAddrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniTopNodeAddrOperEntry  

mscARtgPnniTopNodeAddrScope 1.3.6.1.4.1.562.36.2.1.95.3.4.2.2.10.1.1
This attribute specifies the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..104  


mscARtgPnniTopNodeLinkRowStatusTable 1.3.6.1.4.1.562.36.2.1.95.3.4.2.3.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscARtgPnniTopNodeLink components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniTopNodeLinkRowStatusEntry

mscARtgPnniTopNodeLinkRowStatusEntry 1.3.6.1.4.1.562.36.2.1.95.3.4.2.3.1.1
A single entry in the table represents a single mscARtgPnniTopNodeLink component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniTopNodeLinkRowStatusEntry  

mscARtgPnniTopNodeLinkRowStatus 1.3.6.1.4.1.562.36.2.1.95.3.4.2.3.1.1.1
This variable is used as the basis for SNMP naming of mscARtgPnniTopNodeLink components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscARtgPnniTopNodeLinkComponentName 1.3.6.1.4.1.562.36.2.1.95.3.4.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscARtgPnniTopNodeLinkStorageType 1.3.6.1.4.1.562.36.2.1.95.3.4.2.3.1.1.4
This variable represents the storage type value for the mscARtgPnniTopNodeLink tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscARtgPnniTopNodeLinkIndex 1.3.6.1.4.1.562.36.2.1.95.3.4.2.3.1.1.10
This variable represents the index for the mscARtgPnniTopNodeLink tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..268435455  

mscARtgPnniTopNodeLinkOperTable 1.3.6.1.4.1.562.36.2.1.95.3.4.2.3.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of a Link component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniTopNodeLinkOperEntry

mscARtgPnniTopNodeLinkOperEntry 1.3.6.1.4.1.562.36.2.1.95.3.4.2.3.10.1
An entry in the mscARtgPnniTopNodeLinkOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniTopNodeLinkOperEntry  

mscARtgPnniTopNodeLinkRemoteNodeId 1.3.6.1.4.1.562.36.2.1.95.3.4.2.3.10.1.1
This attribute indicates the id of the node at the far end of this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(22)  

mscARtgPnniTopNodeLinkRemotePortId 1.3.6.1.4.1.562.36.2.1.95.3.4.2.3.10.1.2
This attribute indicates the node's port id at the far end of this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscARtgPnniPort 1.3.6.1.4.1.562.36.2.1.95.3.5
OBJECT IDENTIFIER    

mscARtgPnniPortRowStatusTable 1.3.6.1.4.1.562.36.2.1.95.3.5.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscARtgPnniPort components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniPortRowStatusEntry

mscARtgPnniPortRowStatusEntry 1.3.6.1.4.1.562.36.2.1.95.3.5.1.1
A single entry in the table represents a single mscARtgPnniPort component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniPortRowStatusEntry  

mscARtgPnniPortRowStatus 1.3.6.1.4.1.562.36.2.1.95.3.5.1.1.1
This variable is used as the basis for SNMP naming of mscARtgPnniPort components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscARtgPnniPortComponentName 1.3.6.1.4.1.562.36.2.1.95.3.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscARtgPnniPortStorageType 1.3.6.1.4.1.562.36.2.1.95.3.5.1.1.4
This variable represents the storage type value for the mscARtgPnniPort tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscARtgPnniPortIndex 1.3.6.1.4.1.562.36.2.1.95.3.5.1.1.10
This variable represents the index for the mscARtgPnniPort tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..268435455  

mscARtgPnniPortOperTable 1.3.6.1.4.1.562.36.2.1.95.3.5.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of a Port component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscARtgPnniPortOperEntry

mscARtgPnniPortOperEntry 1.3.6.1.4.1.562.36.2.1.95.3.5.10.1
An entry in the mscARtgPnniPortOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscARtgPnniPortOperEntry  

mscARtgPnniPortStdComponentName 1.3.6.1.4.1.562.36.2.1.95.3.5.10.1.1
This attribute indicates the component name of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

mscAtmCR 1.3.6.1.4.1.562.36.2.1.113
OBJECT IDENTIFIER    

mscAtmCRRowStatusTable 1.3.6.1.4.1.562.36.2.1.113.1
This entry controls the addition and deletion of mscAtmCR components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmCRRowStatusEntry

mscAtmCRRowStatusEntry 1.3.6.1.4.1.562.36.2.1.113.1.1
A single entry in the table represents a single mscAtmCR component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmCRRowStatusEntry  

mscAtmCRRowStatus 1.3.6.1.4.1.562.36.2.1.113.1.1.1
This variable is used as the basis for SNMP naming of mscAtmCR components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmCRComponentName 1.3.6.1.4.1.562.36.2.1.113.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmCRStorageType 1.3.6.1.4.1.562.36.2.1.113.1.1.4
This variable represents the storage type value for the mscAtmCR tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmCRIndex 1.3.6.1.4.1.562.36.2.1.113.1.1.10
This variable represents the index for the mscAtmCR tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmCRProvTable 1.3.6.1.4.1.562.36.2.1.113.10
This group represents the provisioned attributes for the AtmCallRouter component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmCRProvEntry

mscAtmCRProvEntry 1.3.6.1.4.1.562.36.2.1.113.10.1
An entry in the mscAtmCRProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmCRProvEntry  

mscAtmCRNodeAddress 1.3.6.1.4.1.562.36.2.1.113.10.1.1
This attribute specifies the NSAP address prefix used for ILMI purposes.
Status: obsolete Access: read-write
OBJECT-TYPE    
  AsciiString Size(26)  

mscAtmCRStatsTable 1.3.6.1.4.1.562.36.2.1.113.11
This group represents the operational attributes for the AtmCallRouter component.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmCRStatsEntry

mscAtmCRStatsEntry 1.3.6.1.4.1.562.36.2.1.113.11.1
An entry in the mscAtmCRStatsTable.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  MscAtmCRStatsEntry  

mscAtmCRCallsRouted 1.3.6.1.4.1.562.36.2.1.113.11.1.1
This attribute counts the total number of calls routed.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmCRCallsFailed 1.3.6.1.4.1.562.36.2.1.113.11.1.2
This attribute specifies the number of calls that failed to route.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmCRDna 1.3.6.1.4.1.562.36.2.1.113.2
OBJECT IDENTIFIER    

mscAtmCRDnaRowStatusTable 1.3.6.1.4.1.562.36.2.1.113.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAtmCRDna components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmCRDnaRowStatusEntry

mscAtmCRDnaRowStatusEntry 1.3.6.1.4.1.562.36.2.1.113.2.1.1
A single entry in the table represents a single mscAtmCRDna component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmCRDnaRowStatusEntry  

mscAtmCRDnaRowStatus 1.3.6.1.4.1.562.36.2.1.113.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmCRDna components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAtmCRDnaComponentName 1.3.6.1.4.1.562.36.2.1.113.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmCRDnaStorageType 1.3.6.1.4.1.562.36.2.1.113.2.1.1.4
This variable represents the storage type value for the mscAtmCRDna tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmCRDnaIndex 1.3.6.1.4.1.562.36.2.1.113.2.1.1.10
This variable represents the index for the mscAtmCRDna tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..40)  

mscAtmCRDnaDestinationNameTable 1.3.6.1.4.1.562.36.2.1.113.2.289
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates which components have this address provisioned or dynamically registered via ILMI.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmCRDnaDestinationNameEntry

mscAtmCRDnaDestinationNameEntry 1.3.6.1.4.1.562.36.2.1.113.2.289.1
An entry in the mscAtmCRDnaDestinationNameTable.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  MscAtmCRDnaDestinationNameEntry  

mscAtmCRDnaDestinationNameValue 1.3.6.1.4.1.562.36.2.1.113.2.289.1.1
This variable represents both the value and the index for the mscAtmCRDnaDestinationNameTable.
Status: obsolete Access: read-only
OBJECT-TYPE    
  RowPointer  

mscAtmIfVpcSrc 1.3.6.1.4.1.562.36.2.1.114.4.6
OBJECT IDENTIFIER    

mscAtmIfVpcSrcRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.4.6.1
This entry controls the addition and deletion of mscAtmIfVpcSrc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVpcSrcRowStatusEntry

mscAtmIfVpcSrcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.4.6.1.1
A single entry in the table represents a single mscAtmIfVpcSrc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVpcSrcRowStatusEntry  

mscAtmIfVpcSrcRowStatus 1.3.6.1.4.1.562.36.2.1.114.4.6.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVpcSrc components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfVpcSrcComponentName 1.3.6.1.4.1.562.36.2.1.114.4.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVpcSrcStorageType 1.3.6.1.4.1.562.36.2.1.114.4.6.1.1.4
This variable represents the storage type value for the mscAtmIfVpcSrc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVpcSrcIndex 1.3.6.1.4.1.562.36.2.1.114.4.6.1.1.10
This variable represents the index for the mscAtmIfVpcSrc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVpcSrcProvTable 1.3.6.1.4.1.562.36.2.1.114.4.6.10
This attribute group contains the provisionable attributes of the AtmIf/n Vpc/vpi SrcPvp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVpcSrcProvEntry

mscAtmIfVpcSrcProvEntry 1.3.6.1.4.1.562.36.2.1.114.4.6.10.1
An entry in the mscAtmIfVpcSrcProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVpcSrcProvEntry  

mscAtmIfVpcSrcCallingAddress 1.3.6.1.4.1.562.36.2.1.114.4.6.10.1.1
This attribute specifies the calling address of the soft PVP. If it is a null string, then the calling address is the address of the current interface (that is, where the soft PVC originates).
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..20)  

mscAtmIfVpcSrcCalledAddress 1.3.6.1.4.1.562.36.2.1.114.4.6.10.1.2
This attribute specifies the called (remote) address of the soft PVP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(20)  

mscAtmIfVpcSrcCalledVpi 1.3.6.1.4.1.562.36.2.1.114.4.6.10.1.3
This attribute specifies the called VPI of the soft PVP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4095  

mscAtmIfVpcSrcOperTable 1.3.6.1.4.1.562.36.2.1.114.4.6.11
This attribute group contains the operational attributes associated with the SrcPvp or SrcPvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVpcSrcOperEntry

mscAtmIfVpcSrcOperEntry 1.3.6.1.4.1.562.36.2.1.114.4.6.11.1
An entry in the mscAtmIfVpcSrcOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVpcSrcOperEntry  

mscAtmIfVpcSrcState 1.3.6.1.4.1.562.36.2.1.114.4.6.11.1.1
This attribute indicates the state of the soft PVP or soft PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(0), inactive(1)  

mscAtmIfVpcSrcRetryCount 1.3.6.1.4.1.562.36.2.1.114.4.6.11.1.2
This attribute indicates the number of failed attempts to set up the soft PVP or soft PVC since the last time the connection failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfVpcSrcLastFailureCauseCode 1.3.6.1.4.1.562.36.2.1.114.4.6.11.1.3
This attribute contains the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages. The default value for this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVpcSrcLastFailureDiagCode 1.3.6.1.4.1.562.36.2.1.114.4.6.11.1.4
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to NULL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..8)  

mscAtmIfVpcRp 1.3.6.1.4.1.562.36.2.1.114.4.7
OBJECT IDENTIFIER    

mscAtmIfVpcRpRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.4.7.1
This entry controls the addition and deletion of mscAtmIfVpcRp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVpcRpRowStatusEntry

mscAtmIfVpcRpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.4.7.1.1
A single entry in the table represents a single mscAtmIfVpcRp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVpcRpRowStatusEntry  

mscAtmIfVpcRpRowStatus 1.3.6.1.4.1.562.36.2.1.114.4.7.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVpcRp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAtmIfVpcRpComponentName 1.3.6.1.4.1.562.36.2.1.114.4.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVpcRpStorageType 1.3.6.1.4.1.562.36.2.1.114.4.7.1.1.4
This variable represents the storage type value for the mscAtmIfVpcRp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVpcRpIndex 1.3.6.1.4.1.562.36.2.1.114.4.7.1.1.10
This variable represents the index for the mscAtmIfVpcRp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVpcRpOperTable 1.3.6.1.4.1.562.36.2.1.114.4.7.10
This attribute group contains the operational attributes for the AtmRelayPoint component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVpcRpOperEntry

mscAtmIfVpcRpOperEntry 1.3.6.1.4.1.562.36.2.1.114.4.7.10.1
An entry in the mscAtmIfVpcRpOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVpcRpOperEntry  

mscAtmIfVpcRpNextHop 1.3.6.1.4.1.562.36.2.1.114.4.7.10.1.1
This attribute indicates the component name of the Rp component with which this Rp component is associated.
Status: obsolete Access: read-only
OBJECT-TYPE    
  RowPointer  

mscAtmIfVpcRpNextHopsTable 1.3.6.1.4.1.562.36.2.1.114.4.7.430
This attribute indicates the component name(s) of the Rp component(s) with which this Rp component is associated. This attribute can have more than one component name only when the Vcc distributionType is pointToMultipoint and the callDirection is fromLink.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVpcRpNextHopsEntry

mscAtmIfVpcRpNextHopsEntry 1.3.6.1.4.1.562.36.2.1.114.4.7.430.1
An entry in the mscAtmIfVpcRpNextHopsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVpcRpNextHopsEntry  

mscAtmIfVpcRpNextHopsValue 1.3.6.1.4.1.562.36.2.1.114.4.7.430.1.1
This variable represents both the value and the index for the mscAtmIfVpcRpNextHopsTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

mscAtmIfVpcDst 1.3.6.1.4.1.562.36.2.1.114.4.8
OBJECT IDENTIFIER    

mscAtmIfVpcDstRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.4.8.1
This entry controls the addition and deletion of mscAtmIfVpcDst components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVpcDstRowStatusEntry

mscAtmIfVpcDstRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.4.8.1.1
A single entry in the table represents a single mscAtmIfVpcDst component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVpcDstRowStatusEntry  

mscAtmIfVpcDstRowStatus 1.3.6.1.4.1.562.36.2.1.114.4.8.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVpcDst components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAtmIfVpcDstComponentName 1.3.6.1.4.1.562.36.2.1.114.4.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVpcDstStorageType 1.3.6.1.4.1.562.36.2.1.114.4.8.1.1.4
This variable represents the storage type value for the mscAtmIfVpcDst tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVpcDstIndex 1.3.6.1.4.1.562.36.2.1.114.4.8.1.1.10
This variable represents the index for the mscAtmIfVpcDst tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVpcDstOperTable 1.3.6.1.4.1.562.36.2.1.114.4.8.10
This attribute group contains the operational attributes for the AtmIf/n Vpc/vpi DstPvp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVpcDstOperEntry

mscAtmIfVpcDstOperEntry 1.3.6.1.4.1.562.36.2.1.114.4.8.10.1
An entry in the mscAtmIfVpcDstOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVpcDstOperEntry  

mscAtmIfVpcDstCalledAddress 1.3.6.1.4.1.562.36.2.1.114.4.8.10.1.1
This attribute indicates the called address of the soft PVP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(20)  

mscAtmIfVpcDstCallingAddress 1.3.6.1.4.1.562.36.2.1.114.4.8.10.1.2
This attribute indicates the calling (remote) address of the soft PVP. If the address in not known, then the value of this address is Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(7..40)  

mscAtmIfVpcDstCallingVpi 1.3.6.1.4.1.562.36.2.1.114.4.8.10.1.3
This attribute represents the calling (remote) VPI of the soft PVP. If the VPI value is not known, the attribute value is set to Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..7)  

mscAtmIfVccSrc 1.3.6.1.4.1.562.36.2.1.114.5.8
OBJECT IDENTIFIER    

mscAtmIfVccSrcRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.5.8.1
This entry controls the addition and deletion of mscAtmIfVccSrc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVccSrcRowStatusEntry

mscAtmIfVccSrcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.5.8.1.1
A single entry in the table represents a single mscAtmIfVccSrc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVccSrcRowStatusEntry  

mscAtmIfVccSrcRowStatus 1.3.6.1.4.1.562.36.2.1.114.5.8.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVccSrc components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfVccSrcComponentName 1.3.6.1.4.1.562.36.2.1.114.5.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVccSrcStorageType 1.3.6.1.4.1.562.36.2.1.114.5.8.1.1.4
This variable represents the storage type value for the mscAtmIfVccSrc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVccSrcIndex 1.3.6.1.4.1.562.36.2.1.114.5.8.1.1.10
This variable represents the index for the mscAtmIfVccSrc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVccSrcProvTable 1.3.6.1.4.1.562.36.2.1.114.5.8.10
This attribute group contains the provisionable attributes of the SourcePvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVccSrcProvEntry

mscAtmIfVccSrcProvEntry 1.3.6.1.4.1.562.36.2.1.114.5.8.10.1
An entry in the mscAtmIfVccSrcProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVccSrcProvEntry  

mscAtmIfVccSrcRemoteAddress 1.3.6.1.4.1.562.36.2.1.114.5.8.10.1.1
This attribute represents the remote address of the soft PVC.
Status: obsolete Access: read-write
OBJECT-TYPE    
  HexString Size(20)  

mscAtmIfVccSrcRemoteVpiVci 1.3.6.1.4.1.562.36.2.1.114.5.8.10.1.2
This attribute represents the remote VPI and VCI of the soft PVC.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IntegerSequence Size(3..9)  

mscAtmIfVccSrcCallingAddress 1.3.6.1.4.1.562.36.2.1.114.5.8.10.1.3
This attribute represents the calling address of the soft PVC. If it is a null string, then the calling address is the address of the current interface (that is, where the soft PVC originates).
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..20)  

mscAtmIfVccSrcCalledAddress 1.3.6.1.4.1.562.36.2.1.114.5.8.10.1.4
This attribute represents the called (remote) address of the soft PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(20)  

mscAtmIfVccSrcCalledVpiVci 1.3.6.1.4.1.562.36.2.1.114.5.8.10.1.5
This attribute represents the remote VPI and VCI of the soft PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IntegerSequence Size(3..10)  

mscAtmIfVccSrcOperTable 1.3.6.1.4.1.562.36.2.1.114.5.8.11
This attribute group contains the operational attributes associated with the SrcPvp or SrcPvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVccSrcOperEntry

mscAtmIfVccSrcOperEntry 1.3.6.1.4.1.562.36.2.1.114.5.8.11.1
An entry in the mscAtmIfVccSrcOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVccSrcOperEntry  

mscAtmIfVccSrcState 1.3.6.1.4.1.562.36.2.1.114.5.8.11.1.1
This attribute indicates the state of the soft PVP or soft PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(0), inactive(1)  

mscAtmIfVccSrcRetryCount 1.3.6.1.4.1.562.36.2.1.114.5.8.11.1.2
This attribute indicates the number of failed attempts to set up the soft PVP or soft PVC since the last time the connection failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfVccSrcLastFailureCauseCode 1.3.6.1.4.1.562.36.2.1.114.5.8.11.1.3
This attribute contains the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages. The default value for this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVccSrcLastFailureDiagCode 1.3.6.1.4.1.562.36.2.1.114.5.8.11.1.4
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to NULL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..8)  

mscAtmIfVccEp 1.3.6.1.4.1.562.36.2.1.114.5.9
OBJECT IDENTIFIER    

mscAtmIfVccEpRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.5.9.1
This entry controls the addition and deletion of mscAtmIfVccEp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVccEpRowStatusEntry

mscAtmIfVccEpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.5.9.1.1
A single entry in the table represents a single mscAtmIfVccEp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVccEpRowStatusEntry  

mscAtmIfVccEpRowStatus 1.3.6.1.4.1.562.36.2.1.114.5.9.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVccEp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAtmIfVccEpComponentName 1.3.6.1.4.1.562.36.2.1.114.5.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVccEpStorageType 1.3.6.1.4.1.562.36.2.1.114.5.9.1.1.4
This variable represents the storage type value for the mscAtmIfVccEp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVccEpIndex 1.3.6.1.4.1.562.36.2.1.114.5.9.1.1.10
This variable represents the index for the mscAtmIfVccEp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVccEpOperTable 1.3.6.1.4.1.562.36.2.1.114.5.9.10
This attribute group contains the operational attributes for the AtmEndPoint component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVccEpOperEntry

mscAtmIfVccEpOperEntry 1.3.6.1.4.1.562.36.2.1.114.5.9.10.1
An entry in the mscAtmIfVccEpOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVccEpOperEntry  

mscAtmIfVccEpApplicationName 1.3.6.1.4.1.562.36.2.1.114.5.9.10.1.1
This attribute indicates the component name associated with the application associated with the switched VCC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

mscAtmIfVccRp 1.3.6.1.4.1.562.36.2.1.114.5.10
OBJECT IDENTIFIER    

mscAtmIfVccRpRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.5.10.1
This entry controls the addition and deletion of mscAtmIfVccRp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVccRpRowStatusEntry

mscAtmIfVccRpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.5.10.1.1
A single entry in the table represents a single mscAtmIfVccRp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVccRpRowStatusEntry  

mscAtmIfVccRpRowStatus 1.3.6.1.4.1.562.36.2.1.114.5.10.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVccRp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAtmIfVccRpComponentName 1.3.6.1.4.1.562.36.2.1.114.5.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVccRpStorageType 1.3.6.1.4.1.562.36.2.1.114.5.10.1.1.4
This variable represents the storage type value for the mscAtmIfVccRp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVccRpIndex 1.3.6.1.4.1.562.36.2.1.114.5.10.1.1.10
This variable represents the index for the mscAtmIfVccRp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVccRpOperTable 1.3.6.1.4.1.562.36.2.1.114.5.10.10
This attribute group contains the operational attributes for the AtmRelayPoint component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVccRpOperEntry

mscAtmIfVccRpOperEntry 1.3.6.1.4.1.562.36.2.1.114.5.10.10.1
An entry in the mscAtmIfVccRpOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVccRpOperEntry  

mscAtmIfVccRpNextHop 1.3.6.1.4.1.562.36.2.1.114.5.10.10.1.1
This attribute indicates the component name of the Rp component with which this Rp component is associated.
Status: obsolete Access: read-only
OBJECT-TYPE    
  RowPointer  

mscAtmIfVccRpNextHopsTable 1.3.6.1.4.1.562.36.2.1.114.5.10.430
This attribute indicates the component name(s) of the Rp component(s) with which this Rp component is associated. This attribute can have more than one component name only when the Vcc distributionType is pointToMultipoint and the callDirection is fromLink.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVccRpNextHopsEntry

mscAtmIfVccRpNextHopsEntry 1.3.6.1.4.1.562.36.2.1.114.5.10.430.1
An entry in the mscAtmIfVccRpNextHopsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVccRpNextHopsEntry  

mscAtmIfVccRpNextHopsValue 1.3.6.1.4.1.562.36.2.1.114.5.10.430.1.1
This variable represents both the value and the index for the mscAtmIfVccRpNextHopsTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

mscAtmIfVccDst 1.3.6.1.4.1.562.36.2.1.114.5.11
OBJECT IDENTIFIER    

mscAtmIfVccDstRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.5.11.1
This entry controls the addition and deletion of mscAtmIfVccDst components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVccDstRowStatusEntry

mscAtmIfVccDstRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.5.11.1.1
A single entry in the table represents a single mscAtmIfVccDst component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVccDstRowStatusEntry  

mscAtmIfVccDstRowStatus 1.3.6.1.4.1.562.36.2.1.114.5.11.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVccDst components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAtmIfVccDstComponentName 1.3.6.1.4.1.562.36.2.1.114.5.11.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVccDstStorageType 1.3.6.1.4.1.562.36.2.1.114.5.11.1.1.4
This variable represents the storage type value for the mscAtmIfVccDst tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVccDstIndex 1.3.6.1.4.1.562.36.2.1.114.5.11.1.1.10
This variable represents the index for the mscAtmIfVccDst tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVccDstOperTable 1.3.6.1.4.1.562.36.2.1.114.5.11.10
This attribute group contains the operational attributes for the DestinationPvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVccDstOperEntry

mscAtmIfVccDstOperEntry 1.3.6.1.4.1.562.36.2.1.114.5.11.10.1
An entry in the mscAtmIfVccDstOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVccDstOperEntry  

mscAtmIfVccDstCalledAddress 1.3.6.1.4.1.562.36.2.1.114.5.11.10.1.3
This attribute represents the called address of the soft PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(20)  

mscAtmIfVccDstCallingAddress 1.3.6.1.4.1.562.36.2.1.114.5.11.10.1.4
This attribute represents the remote address of the soft PVC. If the address in not known, then the value of this address is Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(7..40)  

mscAtmIfVccDstCallingVpiVci 1.3.6.1.4.1.562.36.2.1.114.5.11.10.1.5
This attribute represents the remote VPI and VCI of the soft PVC. If the VPI and VCI values are not known, this attribute is set to Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(7..9)  

mscAtmIfVptVccSrc 1.3.6.1.4.1.562.36.2.1.114.9.20.8
OBJECT IDENTIFIER    

mscAtmIfVptVccSrcRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.20.8.1
This entry controls the addition and deletion of mscAtmIfVptVccSrc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptVccSrcRowStatusEntry

mscAtmIfVptVccSrcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.20.8.1.1
A single entry in the table represents a single mscAtmIfVptVccSrc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptVccSrcRowStatusEntry  

mscAtmIfVptVccSrcRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.20.8.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptVccSrc components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptVccSrcComponentName 1.3.6.1.4.1.562.36.2.1.114.9.20.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptVccSrcStorageType 1.3.6.1.4.1.562.36.2.1.114.9.20.8.1.1.4
This variable represents the storage type value for the mscAtmIfVptVccSrc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVptVccSrcIndex 1.3.6.1.4.1.562.36.2.1.114.9.20.8.1.1.10
This variable represents the index for the mscAtmIfVptVccSrc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptVccSrcProvTable 1.3.6.1.4.1.562.36.2.1.114.9.20.8.10
This attribute group contains the provisionable attributes of the SourcePvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptVccSrcProvEntry

mscAtmIfVptVccSrcProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.20.8.10.1
An entry in the mscAtmIfVptVccSrcProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptVccSrcProvEntry  

mscAtmIfVptVccSrcRemoteAddress 1.3.6.1.4.1.562.36.2.1.114.9.20.8.10.1.1
This attribute represents the remote address of the soft PVC.
Status: obsolete Access: read-write
OBJECT-TYPE    
  HexString Size(20)  

mscAtmIfVptVccSrcRemoteVpiVci 1.3.6.1.4.1.562.36.2.1.114.9.20.8.10.1.2
This attribute represents the remote VPI and VCI of the soft PVC.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IntegerSequence Size(3..9)  

mscAtmIfVptVccSrcCallingAddress 1.3.6.1.4.1.562.36.2.1.114.9.20.8.10.1.3
This attribute represents the calling address of the soft PVC. If it is a null string, then the calling address is the address of the current interface (that is, where the soft PVC originates).
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..20)  

mscAtmIfVptVccSrcCalledAddress 1.3.6.1.4.1.562.36.2.1.114.9.20.8.10.1.4
This attribute represents the called (remote) address of the soft PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(20)  

mscAtmIfVptVccSrcCalledVpiVci 1.3.6.1.4.1.562.36.2.1.114.9.20.8.10.1.5
This attribute represents the remote VPI and VCI of the soft PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IntegerSequence Size(3..10)  

mscAtmIfVptVccSrcOperTable 1.3.6.1.4.1.562.36.2.1.114.9.20.8.11
This attribute group contains the operational attributes associated with the SrcPvp or SrcPvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptVccSrcOperEntry

mscAtmIfVptVccSrcOperEntry 1.3.6.1.4.1.562.36.2.1.114.9.20.8.11.1
An entry in the mscAtmIfVptVccSrcOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptVccSrcOperEntry  

mscAtmIfVptVccSrcState 1.3.6.1.4.1.562.36.2.1.114.9.20.8.11.1.1
This attribute indicates the state of the soft PVP or soft PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(0), inactive(1)  

mscAtmIfVptVccSrcRetryCount 1.3.6.1.4.1.562.36.2.1.114.9.20.8.11.1.2
This attribute indicates the number of failed attempts to set up the soft PVP or soft PVC since the last time the connection failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfVptVccSrcLastFailureCauseCode 1.3.6.1.4.1.562.36.2.1.114.9.20.8.11.1.3
This attribute contains the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages. The default value for this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVptVccSrcLastFailureDiagCode 1.3.6.1.4.1.562.36.2.1.114.9.20.8.11.1.4
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to NULL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..8)  

mscAtmIfVptVccEp 1.3.6.1.4.1.562.36.2.1.114.9.20.9
OBJECT IDENTIFIER    

mscAtmIfVptVccEpRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.20.9.1
This entry controls the addition and deletion of mscAtmIfVptVccEp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptVccEpRowStatusEntry

mscAtmIfVptVccEpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.20.9.1.1
A single entry in the table represents a single mscAtmIfVptVccEp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptVccEpRowStatusEntry  

mscAtmIfVptVccEpRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.20.9.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptVccEp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptVccEpComponentName 1.3.6.1.4.1.562.36.2.1.114.9.20.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptVccEpStorageType 1.3.6.1.4.1.562.36.2.1.114.9.20.9.1.1.4
This variable represents the storage type value for the mscAtmIfVptVccEp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVptVccEpIndex 1.3.6.1.4.1.562.36.2.1.114.9.20.9.1.1.10
This variable represents the index for the mscAtmIfVptVccEp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptVccEpOperTable 1.3.6.1.4.1.562.36.2.1.114.9.20.9.10
This attribute group contains the operational attributes for the AtmEndPoint component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptVccEpOperEntry

mscAtmIfVptVccEpOperEntry 1.3.6.1.4.1.562.36.2.1.114.9.20.9.10.1
An entry in the mscAtmIfVptVccEpOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptVccEpOperEntry  

mscAtmIfVptVccEpApplicationName 1.3.6.1.4.1.562.36.2.1.114.9.20.9.10.1.1
This attribute indicates the component name associated with the application associated with the switched VCC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

mscAtmIfVptVccRp 1.3.6.1.4.1.562.36.2.1.114.9.20.10
OBJECT IDENTIFIER    

mscAtmIfVptVccRpRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.20.10.1
This entry controls the addition and deletion of mscAtmIfVptVccRp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptVccRpRowStatusEntry

mscAtmIfVptVccRpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.20.10.1.1
A single entry in the table represents a single mscAtmIfVptVccRp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptVccRpRowStatusEntry  

mscAtmIfVptVccRpRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.20.10.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptVccRp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptVccRpComponentName 1.3.6.1.4.1.562.36.2.1.114.9.20.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptVccRpStorageType 1.3.6.1.4.1.562.36.2.1.114.9.20.10.1.1.4
This variable represents the storage type value for the mscAtmIfVptVccRp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVptVccRpIndex 1.3.6.1.4.1.562.36.2.1.114.9.20.10.1.1.10
This variable represents the index for the mscAtmIfVptVccRp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptVccRpOperTable 1.3.6.1.4.1.562.36.2.1.114.9.20.10.10
This attribute group contains the operational attributes for the AtmRelayPoint component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptVccRpOperEntry

mscAtmIfVptVccRpOperEntry 1.3.6.1.4.1.562.36.2.1.114.9.20.10.10.1
An entry in the mscAtmIfVptVccRpOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptVccRpOperEntry  

mscAtmIfVptVccRpNextHop 1.3.6.1.4.1.562.36.2.1.114.9.20.10.10.1.1
This attribute indicates the component name of the Rp component with which this Rp component is associated.
Status: obsolete Access: read-only
OBJECT-TYPE    
  RowPointer  

mscAtmIfVptVccRpNextHopsTable 1.3.6.1.4.1.562.36.2.1.114.9.20.10.430
This attribute indicates the component name(s) of the Rp component(s) with which this Rp component is associated. This attribute can have more than one component name only when the Vcc distributionType is pointToMultipoint and the callDirection is fromLink.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptVccRpNextHopsEntry

mscAtmIfVptVccRpNextHopsEntry 1.3.6.1.4.1.562.36.2.1.114.9.20.10.430.1
An entry in the mscAtmIfVptVccRpNextHopsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptVccRpNextHopsEntry  

mscAtmIfVptVccRpNextHopsValue 1.3.6.1.4.1.562.36.2.1.114.9.20.10.430.1.1
This variable represents both the value and the index for the mscAtmIfVptVccRpNextHopsTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

mscAtmIfVptVccDst 1.3.6.1.4.1.562.36.2.1.114.9.20.11
OBJECT IDENTIFIER    

mscAtmIfVptVccDstRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.20.11.1
This entry controls the addition and deletion of mscAtmIfVptVccDst components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptVccDstRowStatusEntry

mscAtmIfVptVccDstRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.20.11.1.1
A single entry in the table represents a single mscAtmIfVptVccDst component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptVccDstRowStatusEntry  

mscAtmIfVptVccDstRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.20.11.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptVccDst components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptVccDstComponentName 1.3.6.1.4.1.562.36.2.1.114.9.20.11.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptVccDstStorageType 1.3.6.1.4.1.562.36.2.1.114.9.20.11.1.1.4
This variable represents the storage type value for the mscAtmIfVptVccDst tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVptVccDstIndex 1.3.6.1.4.1.562.36.2.1.114.9.20.11.1.1.10
This variable represents the index for the mscAtmIfVptVccDst tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptVccDstOperTable 1.3.6.1.4.1.562.36.2.1.114.9.20.11.10
This attribute group contains the operational attributes for the DestinationPvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptVccDstOperEntry

mscAtmIfVptVccDstOperEntry 1.3.6.1.4.1.562.36.2.1.114.9.20.11.10.1
An entry in the mscAtmIfVptVccDstOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptVccDstOperEntry  

mscAtmIfVptVccDstCalledAddress 1.3.6.1.4.1.562.36.2.1.114.9.20.11.10.1.3
This attribute represents the called address of the soft PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(20)  

mscAtmIfVptVccDstCallingAddress 1.3.6.1.4.1.562.36.2.1.114.9.20.11.10.1.4
This attribute represents the remote address of the soft PVC. If the address in not known, then the value of this address is Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(7..40)  

mscAtmIfVptVccDstCallingVpiVci 1.3.6.1.4.1.562.36.2.1.114.9.20.11.10.1.5
This attribute represents the remote VPI and VCI of the soft PVC. If the VPI and VCI values are not known, this attribute is set to Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(7..9)  

atmNetworkingGroup 1.3.6.1.4.1.562.36.2.2.42.1
OBJECT IDENTIFIER    

atmNetworkingGroupCA 1.3.6.1.4.1.562.36.2.2.42.1.1
OBJECT IDENTIFIER    

atmNetworkingGroupCA02 1.3.6.1.4.1.562.36.2.2.42.1.1.3
OBJECT IDENTIFIER    

atmNetworkingGroupCA02A 1.3.6.1.4.1.562.36.2.2.42.1.1.3.2
OBJECT IDENTIFIER    

atmNetworkingCapabilities 1.3.6.1.4.1.562.36.2.2.42.3
OBJECT IDENTIFIER    

atmNetworkingCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.42.3.1
OBJECT IDENTIFIER    

atmNetworkingCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.42.3.1.3
OBJECT IDENTIFIER    

atmNetworkingCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.42.3.1.3.2
OBJECT IDENTIFIER