Nortel-MsCarrier-MscPassport-AtmIispMIB

File: Nortel-MsCarrier-MscPassport-AtmIispMIB.mib (176933 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB Nortel-MsCarrier-MscPassport-AtmCoreMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs Counter32
DisplayString StorageType RowStatus
Gauge32 Integer32 Unsigned32
Hex NonReplicated HexString
AsciiStringIndex mscAtmIf mscAtmIfVptIndex
mscAtmIfVpt mscAtmIfIndex

Defined Types

MscAtmIfIispRowStatusEntry  
SEQUENCE    
  mscAtmIfIispRowStatus RowStatus
  mscAtmIfIispComponentName DisplayString
  mscAtmIfIispStorageType StorageType
  mscAtmIfIispIndex NonReplicated

MscAtmIfIispProvEntry  
SEQUENCE    
  mscAtmIfIispVersion INTEGER
  mscAtmIfIispSide INTEGER
  mscAtmIfIispSoftPvcRetryPeriod Unsigned32
  mscAtmIfIispSoftPvpAndPvcRetryPeriod Unsigned32
  mscAtmIfIispSoftPvpAndPvcHoldOffTime Unsigned32

MscAtmIfIispAcctOptEntry  
SEQUENCE    
  mscAtmIfIispAccountCollection OCTET STRING
  mscAtmIfIispAccountConnectionType INTEGER
  mscAtmIfIispAccountClass Unsigned32
  mscAtmIfIispServiceExchange Unsigned32

MscAtmIfIispSigRowStatusEntry  
SEQUENCE    
  mscAtmIfIispSigRowStatus RowStatus
  mscAtmIfIispSigComponentName DisplayString
  mscAtmIfIispSigStorageType StorageType
  mscAtmIfIispSigIndex NonReplicated

MscAtmIfIispSigProvEntry  
SEQUENCE    
  mscAtmIfIispSigVci Unsigned32
  mscAtmIfIispSigAddressConversion INTEGER
  mscAtmIfIispSigOperatingMode INTEGER

MscAtmIfIispSigStateEntry  
SEQUENCE    
  mscAtmIfIispSigAdminState INTEGER
  mscAtmIfIispSigOperationalState INTEGER
  mscAtmIfIispSigUsageState INTEGER

MscAtmIfIispSigOperEntry  
SEQUENCE    
  mscAtmIfIispSigLastTxCauseCode Unsigned32
  mscAtmIfIispSigLastTxDiagCode Hex
  mscAtmIfIispSigLastRxCauseCode Unsigned32
  mscAtmIfIispSigLastRxDiagCode Hex

MscAtmIfIispSigStatsEntry  
SEQUENCE    
  mscAtmIfIispSigCurrentConnections Counter32
  mscAtmIfIispSigPeakConnections Gauge32
  mscAtmIfIispSigSuccessfulConnections Counter32
  mscAtmIfIispSigFailedConnections Counter32
  mscAtmIfIispSigTxPdus Counter32
  mscAtmIfIispSigRxPdus Counter32
  mscAtmIfIispSigCurrentPmpConnections Gauge32
  mscAtmIfIispSigPeakPmpConnections Gauge32
  mscAtmIfIispSigSuccessfulPmpConnections Counter32
  mscAtmIfIispSigFailedPmpConnections Counter32
  mscAtmIfIispSigNewCurrentConnections Gauge32

MscAtmIfIispSigVcdRowStatusEntry  
SEQUENCE    
  mscAtmIfIispSigVcdRowStatus RowStatus
  mscAtmIfIispSigVcdComponentName DisplayString
  mscAtmIfIispSigVcdStorageType StorageType
  mscAtmIfIispSigVcdIndex NonReplicated

MscAtmIfIispSigVcdProvEntry  
SEQUENCE    
  mscAtmIfIispSigVcdTrafficDescType INTEGER
  mscAtmIfIispSigVcdAtmServiceCategory INTEGER
  mscAtmIfIispSigVcdWeight Unsigned32
  mscAtmIfIispSigVcdQosClass INTEGER
  mscAtmIfIispSigVcdTrafficShaping INTEGER
  mscAtmIfIispSigVcdUnshapedTransmitQueueing INTEGER
  mscAtmIfIispSigVcdUsageParameterControl INTEGER

MscAtmIfIispSigVcdTdpEntry  
SEQUENCE    
  mscAtmIfIispSigVcdTdpIndex Integer32
  mscAtmIfIispSigVcdTdpValue Unsigned32

MscAtmIfIispAddrRowStatusEntry  
SEQUENCE    
  mscAtmIfIispAddrRowStatus RowStatus
  mscAtmIfIispAddrComponentName DisplayString
  mscAtmIfIispAddrStorageType StorageType
  mscAtmIfIispAddrAddressIndex AsciiStringIndex
  mscAtmIfIispAddrAddressTypeIndex INTEGER

MscAtmIfIispAddrOperEntry  
SEQUENCE    
  mscAtmIfIispAddrScope INTEGER
  mscAtmIfIispAddrReachability INTEGER

MscAtmIfIispAddrTermSPRowStatusEntry  
SEQUENCE    
  mscAtmIfIispAddrTermSPRowStatus RowStatus
  mscAtmIfIispAddrTermSPComponentName DisplayString
  mscAtmIfIispAddrTermSPStorageType StorageType
  mscAtmIfIispAddrTermSPIndex NonReplicated

MscAtmIfIispAddrPnniInfoRowStatusEntry  
SEQUENCE    
  mscAtmIfIispAddrPnniInfoRowStatus RowStatus
  mscAtmIfIispAddrPnniInfoComponentName DisplayString
  mscAtmIfIispAddrPnniInfoStorageType StorageType
  mscAtmIfIispAddrPnniInfoIndex NonReplicated

MscAtmIfIispAddrPnniInfoProvEntry  
SEQUENCE    
  mscAtmIfIispAddrPnniInfoScope INTEGER
  mscAtmIfIispAddrPnniInfoReachability INTEGER

MscAtmIfIispCallingAScrRowStatusEntry  
SEQUENCE    
  mscAtmIfIispCallingAScrRowStatus RowStatus
  mscAtmIfIispCallingAScrComponentName DisplayString
  mscAtmIfIispCallingAScrStorageType StorageType
  mscAtmIfIispCallingAScrIndex NonReplicated

MscAtmIfIispCallingAScrProvEntry  
SEQUENCE    
  mscAtmIfIispCallingAScrAdminStatus INTEGER
  mscAtmIfIispCallingAScrDefaultInsertionAddress HexString

MscAtmIfIispCallingAScrStatEntry  
SEQUENCE    
  mscAtmIfIispCallingAScrAcceptedCalls Counter32
  mscAtmIfIispCallingAScrRejectedCalls Counter32
  mscAtmIfIispCallingAScrUnmatchedCalls Counter32

MscAtmIfIispCallingAScrAddrRowStatusEntry  
SEQUENCE    
  mscAtmIfIispCallingAScrAddrRowStatus RowStatus
  mscAtmIfIispCallingAScrAddrComponentName DisplayString
  mscAtmIfIispCallingAScrAddrStorageType StorageType
  mscAtmIfIispCallingAScrAddrAddressIndex AsciiStringIndex
  mscAtmIfIispCallingAScrAddrAddressActionIndex INTEGER

MscAtmIfIispCalledAScrRowStatusEntry  
SEQUENCE    
  mscAtmIfIispCalledAScrRowStatus RowStatus
  mscAtmIfIispCalledAScrComponentName DisplayString
  mscAtmIfIispCalledAScrStorageType StorageType
  mscAtmIfIispCalledAScrIndex NonReplicated

MscAtmIfIispCalledAScrProvEntry  
SEQUENCE    
  mscAtmIfIispCalledAScrAdminStatus INTEGER

MscAtmIfIispCalledAScrStatEntry  
SEQUENCE    
  mscAtmIfIispCalledAScrAcceptedCalls Counter32
  mscAtmIfIispCalledAScrRejectedCalls Counter32
  mscAtmIfIispCalledAScrUnmatchedCalls Counter32

MscAtmIfIispCalledAScrAddrRowStatusEntry  
SEQUENCE    
  mscAtmIfIispCalledAScrAddrRowStatus RowStatus
  mscAtmIfIispCalledAScrAddrComponentName DisplayString
  mscAtmIfIispCalledAScrAddrStorageType StorageType
  mscAtmIfIispCalledAScrAddrAddressIndex AsciiStringIndex
  mscAtmIfIispCalledAScrAddrAddressActionIndex INTEGER

MscAtmIfVptIispRowStatusEntry  
SEQUENCE    
  mscAtmIfVptIispRowStatus RowStatus
  mscAtmIfVptIispComponentName DisplayString
  mscAtmIfVptIispStorageType StorageType
  mscAtmIfVptIispIndex NonReplicated

MscAtmIfVptIispProvEntry  
SEQUENCE    
  mscAtmIfVptIispVersion INTEGER
  mscAtmIfVptIispSide INTEGER
  mscAtmIfVptIispSoftPvcRetryPeriod Unsigned32
  mscAtmIfVptIispSoftPvpAndPvcRetryPeriod Unsigned32
  mscAtmIfVptIispSoftPvpAndPvcHoldOffTime Unsigned32

MscAtmIfVptIispAcctOptEntry  
SEQUENCE    
  mscAtmIfVptIispAccountCollection OCTET STRING
  mscAtmIfVptIispAccountConnectionType INTEGER
  mscAtmIfVptIispAccountClass Unsigned32
  mscAtmIfVptIispServiceExchange Unsigned32

MscAtmIfVptIispVProvEntry  
SEQUENCE    
  mscAtmIfVptIispVpci Unsigned32

MscAtmIfVptIispSigRowStatusEntry  
SEQUENCE    
  mscAtmIfVptIispSigRowStatus RowStatus
  mscAtmIfVptIispSigComponentName DisplayString
  mscAtmIfVptIispSigStorageType StorageType
  mscAtmIfVptIispSigIndex NonReplicated

MscAtmIfVptIispSigProvEntry  
SEQUENCE    
  mscAtmIfVptIispSigVci Unsigned32
  mscAtmIfVptIispSigAddressConversion INTEGER
  mscAtmIfVptIispSigOperatingMode INTEGER

MscAtmIfVptIispSigStateEntry  
SEQUENCE    
  mscAtmIfVptIispSigAdminState INTEGER
  mscAtmIfVptIispSigOperationalState INTEGER
  mscAtmIfVptIispSigUsageState INTEGER

MscAtmIfVptIispSigOperEntry  
SEQUENCE    
  mscAtmIfVptIispSigLastTxCauseCode Unsigned32
  mscAtmIfVptIispSigLastTxDiagCode Hex
  mscAtmIfVptIispSigLastRxCauseCode Unsigned32
  mscAtmIfVptIispSigLastRxDiagCode Hex

MscAtmIfVptIispSigStatsEntry  
SEQUENCE    
  mscAtmIfVptIispSigCurrentConnections Counter32
  mscAtmIfVptIispSigPeakConnections Gauge32
  mscAtmIfVptIispSigSuccessfulConnections Counter32
  mscAtmIfVptIispSigFailedConnections Counter32
  mscAtmIfVptIispSigTxPdus Counter32
  mscAtmIfVptIispSigRxPdus Counter32
  mscAtmIfVptIispSigCurrentPmpConnections Gauge32
  mscAtmIfVptIispSigPeakPmpConnections Gauge32
  mscAtmIfVptIispSigSuccessfulPmpConnections Counter32
  mscAtmIfVptIispSigFailedPmpConnections Counter32
  mscAtmIfVptIispSigNewCurrentConnections Gauge32

MscAtmIfVptIispSigVcdRowStatusEntry  
SEQUENCE    
  mscAtmIfVptIispSigVcdRowStatus RowStatus
  mscAtmIfVptIispSigVcdComponentName DisplayString
  mscAtmIfVptIispSigVcdStorageType StorageType
  mscAtmIfVptIispSigVcdIndex NonReplicated

MscAtmIfVptIispSigVcdProvEntry  
SEQUENCE    
  mscAtmIfVptIispSigVcdTrafficDescType INTEGER
  mscAtmIfVptIispSigVcdAtmServiceCategory INTEGER
  mscAtmIfVptIispSigVcdWeight Unsigned32
  mscAtmIfVptIispSigVcdQosClass INTEGER
  mscAtmIfVptIispSigVcdTrafficShaping INTEGER
  mscAtmIfVptIispSigVcdUnshapedTransmitQueueing INTEGER
  mscAtmIfVptIispSigVcdUsageParameterControl INTEGER

MscAtmIfVptIispSigVcdTdpEntry  
SEQUENCE    
  mscAtmIfVptIispSigVcdTdpIndex Integer32
  mscAtmIfVptIispSigVcdTdpValue Unsigned32

MscAtmIfVptIispAddrRowStatusEntry  
SEQUENCE    
  mscAtmIfVptIispAddrRowStatus RowStatus
  mscAtmIfVptIispAddrComponentName DisplayString
  mscAtmIfVptIispAddrStorageType StorageType
  mscAtmIfVptIispAddrAddressIndex AsciiStringIndex
  mscAtmIfVptIispAddrAddressTypeIndex INTEGER

MscAtmIfVptIispAddrOperEntry  
SEQUENCE    
  mscAtmIfVptIispAddrScope INTEGER
  mscAtmIfVptIispAddrReachability INTEGER

MscAtmIfVptIispAddrTermSPRowStatusEntry  
SEQUENCE    
  mscAtmIfVptIispAddrTermSPRowStatus RowStatus
  mscAtmIfVptIispAddrTermSPComponentName DisplayString
  mscAtmIfVptIispAddrTermSPStorageType StorageType
  mscAtmIfVptIispAddrTermSPIndex NonReplicated

MscAtmIfVptIispAddrPnniInfoRowStatusEntry  
SEQUENCE    
  mscAtmIfVptIispAddrPnniInfoRowStatus RowStatus
  mscAtmIfVptIispAddrPnniInfoComponentName DisplayString
  mscAtmIfVptIispAddrPnniInfoStorageType StorageType
  mscAtmIfVptIispAddrPnniInfoIndex NonReplicated

MscAtmIfVptIispAddrPnniInfoProvEntry  
SEQUENCE    
  mscAtmIfVptIispAddrPnniInfoScope INTEGER
  mscAtmIfVptIispAddrPnniInfoReachability INTEGER

MscAtmIfVptIispCallingAScrRowStatusEntry  
SEQUENCE    
  mscAtmIfVptIispCallingAScrRowStatus RowStatus
  mscAtmIfVptIispCallingAScrComponentName DisplayString
  mscAtmIfVptIispCallingAScrStorageType StorageType
  mscAtmIfVptIispCallingAScrIndex NonReplicated

MscAtmIfVptIispCallingAScrProvEntry  
SEQUENCE    
  mscAtmIfVptIispCallingAScrAdminStatus INTEGER
  mscAtmIfVptIispCallingAScrDefaultInsertionAddress HexString

MscAtmIfVptIispCallingAScrStatEntry  
SEQUENCE    
  mscAtmIfVptIispCallingAScrAcceptedCalls Counter32
  mscAtmIfVptIispCallingAScrRejectedCalls Counter32
  mscAtmIfVptIispCallingAScrUnmatchedCalls Counter32

MscAtmIfVptIispCallingAScrAddrRowStatusEntry  
SEQUENCE    
  mscAtmIfVptIispCallingAScrAddrRowStatus RowStatus
  mscAtmIfVptIispCallingAScrAddrComponentName DisplayString
  mscAtmIfVptIispCallingAScrAddrStorageType StorageType
  mscAtmIfVptIispCallingAScrAddrAddressIndex AsciiStringIndex
  mscAtmIfVptIispCallingAScrAddrAddressActionIndex INTEGER

MscAtmIfVptIispCalledAScrRowStatusEntry  
SEQUENCE    
  mscAtmIfVptIispCalledAScrRowStatus RowStatus
  mscAtmIfVptIispCalledAScrComponentName DisplayString
  mscAtmIfVptIispCalledAScrStorageType StorageType
  mscAtmIfVptIispCalledAScrIndex NonReplicated

MscAtmIfVptIispCalledAScrProvEntry  
SEQUENCE    
  mscAtmIfVptIispCalledAScrAdminStatus INTEGER

MscAtmIfVptIispCalledAScrStatEntry  
SEQUENCE    
  mscAtmIfVptIispCalledAScrAcceptedCalls Counter32
  mscAtmIfVptIispCalledAScrRejectedCalls Counter32
  mscAtmIfVptIispCalledAScrUnmatchedCalls Counter32

MscAtmIfVptIispCalledAScrAddrRowStatusEntry  
SEQUENCE    
  mscAtmIfVptIispCalledAScrAddrRowStatus RowStatus
  mscAtmIfVptIispCalledAScrAddrComponentName DisplayString
  mscAtmIfVptIispCalledAScrAddrStorageType StorageType
  mscAtmIfVptIispCalledAScrAddrAddressIndex AsciiStringIndex
  mscAtmIfVptIispCalledAScrAddrAddressActionIndex INTEGER

Defined Values

atmIispMIB 1.3.6.1.4.1.562.36.2.2.70
OBJECT IDENTIFIER    

mscAtmIfIisp 1.3.6.1.4.1.562.36.2.1.114.7
OBJECT IDENTIFIER    

mscAtmIfIispRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.7.1
This entry controls the addition and deletion of mscAtmIfIisp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispRowStatusEntry

mscAtmIfIispRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.7.1.1
A single entry in the table represents a single mscAtmIfIisp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispRowStatusEntry  

mscAtmIfIispRowStatus 1.3.6.1.4.1.562.36.2.1.114.7.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfIisp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfIispComponentName 1.3.6.1.4.1.562.36.2.1.114.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfIispStorageType 1.3.6.1.4.1.562.36.2.1.114.7.1.1.4
This variable represents the storage type value for the mscAtmIfIisp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfIispIndex 1.3.6.1.4.1.562.36.2.1.114.7.1.1.10
This variable represents the index for the mscAtmIfIisp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfIispProvTable 1.3.6.1.4.1.562.36.2.1.114.7.10
This group contains the provisionable attributes for the Iisp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispProvEntry

mscAtmIfIispProvEntry 1.3.6.1.4.1.562.36.2.1.114.7.10.1
An entry in the mscAtmIfIispProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispProvEntry  

mscAtmIfIispVersion 1.3.6.1.4.1.562.36.2.1.114.7.10.1.1
This attribute indicates which specification the IISP interface complies with. The options are iisp10Sig30 which refers to IISP version 1.0 with 3.0 signalling and iisp10Sig31 which refers to IISP version 1.0 with 3.1 signalling. If this attribute is changed, all switched Vcc components in this interface are cleared due to the fact that the two versions are incompatible.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER iisp10Sig30(2), iisp10Sig31(3)  

mscAtmIfIispSide 1.3.6.1.4.1.562.36.2.1.114.7.10.1.2
This attribute indicates which side the interface is, user or network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER networkSide(0), userSide(1)  

mscAtmIfIispSoftPvcRetryPeriod 1.3.6.1.4.1.562.36.2.1.114.7.10.1.3
This attribute specifies the time to wait between call set up retries. The resolution is to the nearest 10 seconds. This attribute has been obsoleted and is replaced by the softPvpAndPvcRetryPeriod attribute.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 20..999999  

mscAtmIfIispSoftPvpAndPvcRetryPeriod 1.3.6.1.4.1.562.36.2.1.114.7.10.1.4
This attribute specifies the time to wait between soft PVP or soft PVC call setup retries. The resolution is to the nearest 10 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 20..999999  

mscAtmIfIispSoftPvpAndPvcHoldOffTime 1.3.6.1.4.1.562.36.2.1.114.7.10.1.5
This attribute specifies how long to hold off retries following a release or the connection. The resolution is to the nearest 50 ms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 50..20000  

mscAtmIfIispAcctOptTable 1.3.6.1.4.1.562.36.2.1.114.7.11
This group contains the provisionable attributes for accounting.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispAcctOptEntry

mscAtmIfIispAcctOptEntry 1.3.6.1.4.1.562.36.2.1.114.7.11.1
An entry in the mscAtmIfIispAcctOptTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispAcctOptEntry  

mscAtmIfIispAccountCollection 1.3.6.1.4.1.562.36.2.1.114.7.11.1.1
This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit, or force. If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts). If none of the reasons is present, then accounting will be suppressed. The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscAtmIfIispAccountConnectionType 1.3.6.1.4.1.562.36.2.1.114.7.11.1.2
This attribute specifies whether accounting records generated by this interface should be marked as originating, terminating or intermediate. This attribute, in combination with the direction of the call, determines the value of attribute connPointType of the accounting record and may be used by downstream accounting processes to correlate the records. If the value is origTerm then records generated for incoming calls will be marked as originating and records generated for outgoing calls will be marked as terminating. If the value is intermediate then records generated for all calls will be marked as intermediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER origTerm(0), intermediate(1)  

mscAtmIfIispAccountClass 1.3.6.1.4.1.562.36.2.1.114.7.11.1.3
This attribute specifies the accounting class associated with the interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingServiceType or calledServiceType as appropriate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfIispServiceExchange 1.3.6.1.4.1.562.36.2.1.114.7.11.1.4
This attribute specifies the data service exchange associated with this interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingDse or calledDse as appropriate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfIispSig 1.3.6.1.4.1.562.36.2.1.114.7.3
OBJECT IDENTIFIER    

mscAtmIfIispSigRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.7.3.1
This entry controls the addition and deletion of mscAtmIfIispSig components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispSigRowStatusEntry

mscAtmIfIispSigRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.7.3.1.1
A single entry in the table represents a single mscAtmIfIispSig component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispSigRowStatusEntry  

mscAtmIfIispSigRowStatus 1.3.6.1.4.1.562.36.2.1.114.7.3.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfIispSig components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAtmIfIispSigComponentName 1.3.6.1.4.1.562.36.2.1.114.7.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfIispSigStorageType 1.3.6.1.4.1.562.36.2.1.114.7.3.1.1.4
This variable represents the storage type value for the mscAtmIfIispSig tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfIispSigIndex 1.3.6.1.4.1.562.36.2.1.114.7.3.1.1.10
This variable represents the index for the mscAtmIfIispSig tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfIispSigProvTable 1.3.6.1.4.1.562.36.2.1.114.7.3.10
This attribute group contains the provisionable attributes for the Signalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispSigProvEntry

mscAtmIfIispSigProvEntry 1.3.6.1.4.1.562.36.2.1.114.7.3.10.1
An entry in the mscAtmIfIispSigProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispSigProvEntry  

mscAtmIfIispSigVci 1.3.6.1.4.1.562.36.2.1.114.7.3.10.1.1
This attribute specifies the signalling channel number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAtmIfIispSigAddressConversion 1.3.6.1.4.1.562.36.2.1.114.7.3.10.1.2
This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), nativeE164(1), nsap(2)  

mscAtmIfIispSigOperatingMode 1.3.6.1.4.1.562.36.2.1.114.7.3.10.1.3
This attribute specifies the operating mode of the signaling channel. provisionedOnly indicates that only SPVCs and SPVPs are supported on the interface and SVCs are not supported. This value is permitted only on UNI interfaces. normal indicates that SVCs, SPVCs, and SPVPs are supported on the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), provisionedOnly(1)  

mscAtmIfIispSigStateTable 1.3.6.1.4.1.562.36.2.1.114.7.3.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispSigStateEntry

mscAtmIfIispSigStateEntry 1.3.6.1.4.1.562.36.2.1.114.7.3.11.1
An entry in the mscAtmIfIispSigStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispSigStateEntry  

mscAtmIfIispSigAdminState 1.3.6.1.4.1.562.36.2.1.114.7.3.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscAtmIfIispSigOperationalState 1.3.6.1.4.1.562.36.2.1.114.7.3.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAtmIfIispSigUsageState 1.3.6.1.4.1.562.36.2.1.114.7.3.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscAtmIfIispSigOperTable 1.3.6.1.4.1.562.36.2.1.114.7.3.12
This attribute contains the operational attributes for the AtmSignalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispSigOperEntry

mscAtmIfIispSigOperEntry 1.3.6.1.4.1.562.36.2.1.114.7.3.12.1
An entry in the mscAtmIfIispSigOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispSigOperEntry  

mscAtmIfIispSigLastTxCauseCode 1.3.6.1.4.1.562.36.2.1.114.7.3.12.1.1
This attribute indicates the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfIispSigLastTxDiagCode 1.3.6.1.4.1.562.36.2.1.114.7.3.12.1.2
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

mscAtmIfIispSigLastRxCauseCode 1.3.6.1.4.1.562.36.2.1.114.7.3.12.1.3
This attribute contains the cause code in the last received signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfIispSigLastRxDiagCode 1.3.6.1.4.1.562.36.2.1.114.7.3.12.1.4
This attribute contains the diagnostic code in the last received signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

mscAtmIfIispSigStatsTable 1.3.6.1.4.1.562.36.2.1.114.7.3.13
This attribute group contains the statistics associated with the AtmSignalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispSigStatsEntry

mscAtmIfIispSigStatsEntry 1.3.6.1.4.1.562.36.2.1.114.7.3.13.1
An entry in the mscAtmIfIispSigStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispSigStatsEntry  

mscAtmIfIispSigCurrentConnections 1.3.6.1.4.1.562.36.2.1.114.7.3.13.1.1
This attribute indicates the total number of currently active connections.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfIispSigPeakConnections 1.3.6.1.4.1.562.36.2.1.114.7.3.13.1.2
This attribute indicates the high water mark of active point-to- point and point-to-multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfIispSigSuccessfulConnections 1.3.6.1.4.1.562.36.2.1.114.7.3.13.1.3
This attribute counts the total number of switched point-to- point and point-to-multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfIispSigFailedConnections 1.3.6.1.4.1.562.36.2.1.114.7.3.13.1.4
This attribute counts the total number of switched connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfIispSigTxPdus 1.3.6.1.4.1.562.36.2.1.114.7.3.13.1.5
This attribute counts the number of transmitted signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfIispSigRxPdus 1.3.6.1.4.1.562.36.2.1.114.7.3.13.1.6
This attribute counts the number of received signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfIispSigCurrentPmpConnections 1.3.6.1.4.1.562.36.2.1.114.7.3.13.1.7
This attribute indicates the number of currently active point-to- multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfIispSigPeakPmpConnections 1.3.6.1.4.1.562.36.2.1.114.7.3.13.1.8
This attribute indicates the high water mark of active point-to- multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfIispSigSuccessfulPmpConnections 1.3.6.1.4.1.562.36.2.1.114.7.3.13.1.9
This attribute counts the total number of switched point-to- multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfIispSigFailedPmpConnections 1.3.6.1.4.1.562.36.2.1.114.7.3.13.1.10
This attribute counts the number of switched point-to- multipoint connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfIispSigNewCurrentConnections 1.3.6.1.4.1.562.36.2.1.114.7.3.13.1.11
This attribute indicates the total number of currently active point-to- point and point-to-multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfIispSigVcd 1.3.6.1.4.1.562.36.2.1.114.7.3.2
OBJECT IDENTIFIER    

mscAtmIfIispSigVcdRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.7.3.2.1
This entry controls the addition and deletion of mscAtmIfIispSigVcd components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispSigVcdRowStatusEntry

mscAtmIfIispSigVcdRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.7.3.2.1.1
A single entry in the table represents a single mscAtmIfIispSigVcd component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispSigVcdRowStatusEntry  

mscAtmIfIispSigVcdRowStatus 1.3.6.1.4.1.562.36.2.1.114.7.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfIispSigVcd components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfIispSigVcdComponentName 1.3.6.1.4.1.562.36.2.1.114.7.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfIispSigVcdStorageType 1.3.6.1.4.1.562.36.2.1.114.7.3.2.1.1.4
This variable represents the storage type value for the mscAtmIfIispSigVcd tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfIispSigVcdIndex 1.3.6.1.4.1.562.36.2.1.114.7.3.2.1.1.10
This variable represents the index for the mscAtmIfIispSigVcd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfIispSigVcdProvTable 1.3.6.1.4.1.562.36.2.1.114.7.3.2.10
This group contains the provisionable traffic attributes for a control channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispSigVcdProvEntry

mscAtmIfIispSigVcdProvEntry 1.3.6.1.4.1.562.36.2.1.114.7.3.2.10.1
An entry in the mscAtmIfIispSigVcdProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispSigVcdProvEntry  

mscAtmIfIispSigVcdTrafficDescType 1.3.6.1.4.1.562.36.2.1.114.7.3.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

mscAtmIfIispSigVcdAtmServiceCategory 1.3.6.1.4.1.562.36.2.1.114.7.3.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

mscAtmIfIispSigVcdWeight 1.3.6.1.4.1.562.36.2.1.114.7.3.2.10.1.4
This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic VPTs. When the value is set to sameAsCa, the weight is determined by the weight policy attribute under the CA service category component for all but standard VPT VCCs. For standard VPT VCCs, the weight is determined by the VCC's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the weight policy of this connection relative to other connections. For all but standard VPT VCCs, weight policy determines the proportion of transit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard VPT VCCs, weight policy determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the VPT. When the value is set to upToQueueLimit, the weight policy is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..4095 | 65535  

mscAtmIfIispSigVcdQosClass 1.3.6.1.4.1.562.36.2.1.114.7.3.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

mscAtmIfIispSigVcdTrafficShaping 1.3.6.1.4.1.562.36.2.1.114.7.3.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

mscAtmIfIispSigVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.36.2.1.114.7.3.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

mscAtmIfIispSigVcdUsageParameterControl 1.3.6.1.4.1.562.36.2.1.114.7.3.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

mscAtmIfIispSigVcdTdpTable 1.3.6.1.4.1.562.36.2.1.114.7.3.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispSigVcdTdpEntry

mscAtmIfIispSigVcdTdpEntry 1.3.6.1.4.1.562.36.2.1.114.7.3.2.387.1
An entry in the mscAtmIfIispSigVcdTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispSigVcdTdpEntry  

mscAtmIfIispSigVcdTdpIndex 1.3.6.1.4.1.562.36.2.1.114.7.3.2.387.1.1
This variable represents the mscAtmIfIispSigVcdTdpTable specific index for the mscAtmIfIispSigVcdTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..5  

mscAtmIfIispSigVcdTdpValue 1.3.6.1.4.1.562.36.2.1.114.7.3.2.387.1.2
This variable represents an individual value for the mscAtmIfIispSigVcdTdpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscAtmIfIispAddr 1.3.6.1.4.1.562.36.2.1.114.7.4
OBJECT IDENTIFIER    

mscAtmIfIispAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.7.4.1
This entry controls the addition and deletion of mscAtmIfIispAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispAddrRowStatusEntry

mscAtmIfIispAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.7.4.1.1
A single entry in the table represents a single mscAtmIfIispAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispAddrRowStatusEntry  

mscAtmIfIispAddrRowStatus 1.3.6.1.4.1.562.36.2.1.114.7.4.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfIispAddr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfIispAddrComponentName 1.3.6.1.4.1.562.36.2.1.114.7.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfIispAddrStorageType 1.3.6.1.4.1.562.36.2.1.114.7.4.1.1.4
This variable represents the storage type value for the mscAtmIfIispAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfIispAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.114.7.4.1.1.10
This variable represents an index for the mscAtmIfIispAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..40)  

mscAtmIfIispAddrAddressTypeIndex 1.3.6.1.4.1.562.36.2.1.114.7.4.1.1.11
This variable represents an index for the mscAtmIfIispAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER primary(0), alternate(1), default(3)  

mscAtmIfIispAddrOperTable 1.3.6.1.4.1.562.36.2.1.114.7.4.10
This attribute group contains the operational attributes for the Address component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispAddrOperEntry

mscAtmIfIispAddrOperEntry 1.3.6.1.4.1.562.36.2.1.114.7.4.10.1
An entry in the mscAtmIfIispAddrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispAddrOperEntry  

mscAtmIfIispAddrScope 1.3.6.1.4.1.562.36.2.1.114.7.4.10.1.1
This attribute indicates the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy. If no PnniInfo subcomponent has been provisioned, then the scope will default to the level of this node in the PNNI hierarchy. If this node does not participate in a PNNI hierarchy, then this attribute will have the value of -1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..104  

mscAtmIfIispAddrReachability 1.3.6.1.4.1.562.36.2.1.114.7.4.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

mscAtmIfIispAddrTermSP 1.3.6.1.4.1.562.36.2.1.114.7.4.2
OBJECT IDENTIFIER    

mscAtmIfIispAddrTermSPRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.7.4.2.1
This entry controls the addition and deletion of mscAtmIfIispAddrTermSP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispAddrTermSPRowStatusEntry

mscAtmIfIispAddrTermSPRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.7.4.2.1.1
A single entry in the table represents a single mscAtmIfIispAddrTermSP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispAddrTermSPRowStatusEntry  

mscAtmIfIispAddrTermSPRowStatus 1.3.6.1.4.1.562.36.2.1.114.7.4.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfIispAddrTermSP components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfIispAddrTermSPComponentName 1.3.6.1.4.1.562.36.2.1.114.7.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfIispAddrTermSPStorageType 1.3.6.1.4.1.562.36.2.1.114.7.4.2.1.1.4
This variable represents the storage type value for the mscAtmIfIispAddrTermSP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfIispAddrTermSPIndex 1.3.6.1.4.1.562.36.2.1.114.7.4.2.1.1.10
This variable represents the index for the mscAtmIfIispAddrTermSP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfIispAddrPnniInfo 1.3.6.1.4.1.562.36.2.1.114.7.4.3
OBJECT IDENTIFIER    

mscAtmIfIispAddrPnniInfoRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.7.4.3.1
This entry controls the addition and deletion of mscAtmIfIispAddrPnniInfo components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispAddrPnniInfoRowStatusEntry

mscAtmIfIispAddrPnniInfoRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.7.4.3.1.1
A single entry in the table represents a single mscAtmIfIispAddrPnniInfo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispAddrPnniInfoRowStatusEntry  

mscAtmIfIispAddrPnniInfoRowStatus 1.3.6.1.4.1.562.36.2.1.114.7.4.3.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfIispAddrPnniInfo components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfIispAddrPnniInfoComponentName 1.3.6.1.4.1.562.36.2.1.114.7.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfIispAddrPnniInfoStorageType 1.3.6.1.4.1.562.36.2.1.114.7.4.3.1.1.4
This variable represents the storage type value for the mscAtmIfIispAddrPnniInfo tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfIispAddrPnniInfoIndex 1.3.6.1.4.1.562.36.2.1.114.7.4.3.1.1.10
This variable represents the index for the mscAtmIfIispAddrPnniInfo tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfIispAddrPnniInfoProvTable 1.3.6.1.4.1.562.36.2.1.114.7.4.3.10
This attribute group contains the provisioned attributes relating to PNNI for a PnniInfo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispAddrPnniInfoProvEntry

mscAtmIfIispAddrPnniInfoProvEntry 1.3.6.1.4.1.562.36.2.1.114.7.4.3.10.1
An entry in the mscAtmIfIispAddrPnniInfoProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispAddrPnniInfoProvEntry  

mscAtmIfIispAddrPnniInfoScope 1.3.6.1.4.1.562.36.2.1.114.7.4.3.10.1.1
This attribute specifies the scope of the ATM address, which is the highest level up to which this address will be advertised in the PNNI hierarchy. The scope must be set to a value numerically less than or equal to the level of the lowest level peer group containing this node. Setting the scope to 0 will cause the address to be advertised globally within this PNNI routing domain.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1..104  

mscAtmIfIispAddrPnniInfoReachability 1.3.6.1.4.1.562.36.2.1.114.7.4.3.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

mscAtmIfIispCallingAScr 1.3.6.1.4.1.562.36.2.1.114.7.5
OBJECT IDENTIFIER    

mscAtmIfIispCallingAScrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.7.5.1
This entry controls the addition and deletion of mscAtmIfIispCallingAScr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispCallingAScrRowStatusEntry

mscAtmIfIispCallingAScrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.7.5.1.1
A single entry in the table represents a single mscAtmIfIispCallingAScr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispCallingAScrRowStatusEntry  

mscAtmIfIispCallingAScrRowStatus 1.3.6.1.4.1.562.36.2.1.114.7.5.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfIispCallingAScr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfIispCallingAScrComponentName 1.3.6.1.4.1.562.36.2.1.114.7.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfIispCallingAScrStorageType 1.3.6.1.4.1.562.36.2.1.114.7.5.1.1.4
This variable represents the storage type value for the mscAtmIfIispCallingAScr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfIispCallingAScrIndex 1.3.6.1.4.1.562.36.2.1.114.7.5.1.1.10
This variable represents the index for the mscAtmIfIispCallingAScr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfIispCallingAScrProvTable 1.3.6.1.4.1.562.36.2.1.114.7.5.10
This attribute group contains the provisionable attributes for the CallingAScr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispCallingAScrProvEntry

mscAtmIfIispCallingAScrProvEntry 1.3.6.1.4.1.562.36.2.1.114.7.5.10.1
An entry in the mscAtmIfIispCallingAScrProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispCallingAScrProvEntry  

mscAtmIfIispCallingAScrAdminStatus 1.3.6.1.4.1.562.36.2.1.114.7.5.10.1.1
This attribute specifies whether the calling address screening feature is enabled or disabled. If enabled, incoming SVC calls are screened against provisioned addresses. If enabled and the calling address in the ATM SVC call request is provisioned to be accepted, the call is accepted or rejected according to the action specified for that address. If the value is enabled, and the calling address in the address request is not provisioned, the call is rejected If the value is disabled, no calling address screening is performed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

mscAtmIfIispCallingAScrDefaultInsertionAddress 1.3.6.1.4.1.562.36.2.1.114.7.5.10.1.2
This attribute specifies the address to be inserted into the SVC connection request if adminStatus is enabled and the connection request does not contain a calling address. If the adminStatus attribute is enabled and this attribute is empty, all incoming SVC calls which do not contain a calling address are rejected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..20)  

mscAtmIfIispCallingAScrStatTable 1.3.6.1.4.1.562.36.2.1.114.7.5.11
This attribute group contains statistics related to the incoming SVC call requests received while the adminStatus attribute is set to enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispCallingAScrStatEntry

mscAtmIfIispCallingAScrStatEntry 1.3.6.1.4.1.562.36.2.1.114.7.5.11.1
An entry in the mscAtmIfIispCallingAScrStatTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispCallingAScrStatEntry  

mscAtmIfIispCallingAScrAcceptedCalls 1.3.6.1.4.1.562.36.2.1.114.7.5.11.1.1
This attribute counts the incoming SVC calls which were accepted because the address specified in the call request matched a provisioned ATM address and the associated action was accept. When the counter exceeds the maximum, it wraps to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfIispCallingAScrRejectedCalls 1.3.6.1.4.1.562.36.2.1.114.7.5.11.1.2
This attribute counts the incoming SVC calls which were rejected because the address specified in the call request matched a provisioned ATM address, but the associated action was reject. When the counter exceeds the maximum, it wraps to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfIispCallingAScrUnmatchedCalls 1.3.6.1.4.1.562.36.2.1.114.7.5.11.1.3
This attribute counts the incoming SVC calls which were rejected because none of the provisioned ATM addresses matched the applicable address in the incoming SVC call request. When the counter exceeds the maximum, it wraps to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfIispCallingAScrAddr 1.3.6.1.4.1.562.36.2.1.114.7.5.2
OBJECT IDENTIFIER    

mscAtmIfIispCallingAScrAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.7.5.2.1
This entry controls the addition and deletion of mscAtmIfIispCallingAScrAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispCallingAScrAddrRowStatusEntry

mscAtmIfIispCallingAScrAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.7.5.2.1.1
A single entry in the table represents a single mscAtmIfIispCallingAScrAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispCallingAScrAddrRowStatusEntry  

mscAtmIfIispCallingAScrAddrRowStatus 1.3.6.1.4.1.562.36.2.1.114.7.5.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfIispCallingAScrAddr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfIispCallingAScrAddrComponentName 1.3.6.1.4.1.562.36.2.1.114.7.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfIispCallingAScrAddrStorageType 1.3.6.1.4.1.562.36.2.1.114.7.5.2.1.1.4
This variable represents the storage type value for the mscAtmIfIispCallingAScrAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfIispCallingAScrAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.114.7.5.2.1.1.10
This variable represents an index for the mscAtmIfIispCallingAScrAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..40)  

mscAtmIfIispCallingAScrAddrAddressActionIndex 1.3.6.1.4.1.562.36.2.1.114.7.5.2.1.1.11
This variable represents an index for the mscAtmIfIispCallingAScrAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER accept(0), reject(1)  

mscAtmIfIispCalledAScr 1.3.6.1.4.1.562.36.2.1.114.7.6
OBJECT IDENTIFIER    

mscAtmIfIispCalledAScrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.7.6.1
This entry controls the addition and deletion of mscAtmIfIispCalledAScr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispCalledAScrRowStatusEntry

mscAtmIfIispCalledAScrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.7.6.1.1
A single entry in the table represents a single mscAtmIfIispCalledAScr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispCalledAScrRowStatusEntry  

mscAtmIfIispCalledAScrRowStatus 1.3.6.1.4.1.562.36.2.1.114.7.6.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfIispCalledAScr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfIispCalledAScrComponentName 1.3.6.1.4.1.562.36.2.1.114.7.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfIispCalledAScrStorageType 1.3.6.1.4.1.562.36.2.1.114.7.6.1.1.4
This variable represents the storage type value for the mscAtmIfIispCalledAScr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfIispCalledAScrIndex 1.3.6.1.4.1.562.36.2.1.114.7.6.1.1.10
This variable represents the index for the mscAtmIfIispCalledAScr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfIispCalledAScrProvTable 1.3.6.1.4.1.562.36.2.1.114.7.6.10
This attribute group contains the provisionable attributes for the CalledAScr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispCalledAScrProvEntry

mscAtmIfIispCalledAScrProvEntry 1.3.6.1.4.1.562.36.2.1.114.7.6.10.1
An entry in the mscAtmIfIispCalledAScrProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispCalledAScrProvEntry  

mscAtmIfIispCalledAScrAdminStatus 1.3.6.1.4.1.562.36.2.1.114.7.6.10.1.1
This attribute specifies whether the called address screening feature is enabled or disabled. If the value is enabled, incoming SVC calls will be screened against provisioned called addresses. If the value is enabled and the called address in the ATM SVC call request has been provisioned, the call is accepted or rejected according to the action specified for that address. If the value is enabled and the called address in the call request is not provisioned, the call is rejected. If the value is disabled, no called address screening is performed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

mscAtmIfIispCalledAScrStatTable 1.3.6.1.4.1.562.36.2.1.114.7.6.11
This attribute group contains statistics related to the incoming SVC call requests received while the adminStatus attribute is set to enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispCalledAScrStatEntry

mscAtmIfIispCalledAScrStatEntry 1.3.6.1.4.1.562.36.2.1.114.7.6.11.1
An entry in the mscAtmIfIispCalledAScrStatTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispCalledAScrStatEntry  

mscAtmIfIispCalledAScrAcceptedCalls 1.3.6.1.4.1.562.36.2.1.114.7.6.11.1.1
This attribute counts the incoming SVC calls which were accepted because the address specified in the call request matched a provisioned ATM address and the associated action was accept. When the counter exceeds the maximum, it wraps to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfIispCalledAScrRejectedCalls 1.3.6.1.4.1.562.36.2.1.114.7.6.11.1.2
This attribute counts the incoming SVC calls which were rejected because the address specified in the call request matched a provisioned ATM address, but the associated action was reject. When the counter exceeds the maximum, it wraps to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfIispCalledAScrUnmatchedCalls 1.3.6.1.4.1.562.36.2.1.114.7.6.11.1.3
This attribute counts the incoming SVC calls which were rejected because none of the provisioned ATM addresses matched the applicable address in the incoming SVC call request. When the counter exceeds the maximum, it wraps to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfIispCalledAScrAddr 1.3.6.1.4.1.562.36.2.1.114.7.6.2
OBJECT IDENTIFIER    

mscAtmIfIispCalledAScrAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.7.6.2.1
This entry controls the addition and deletion of mscAtmIfIispCalledAScrAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfIispCalledAScrAddrRowStatusEntry

mscAtmIfIispCalledAScrAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.7.6.2.1.1
A single entry in the table represents a single mscAtmIfIispCalledAScrAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfIispCalledAScrAddrRowStatusEntry  

mscAtmIfIispCalledAScrAddrRowStatus 1.3.6.1.4.1.562.36.2.1.114.7.6.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfIispCalledAScrAddr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfIispCalledAScrAddrComponentName 1.3.6.1.4.1.562.36.2.1.114.7.6.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfIispCalledAScrAddrStorageType 1.3.6.1.4.1.562.36.2.1.114.7.6.2.1.1.4
This variable represents the storage type value for the mscAtmIfIispCalledAScrAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfIispCalledAScrAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.114.7.6.2.1.1.10
This variable represents an index for the mscAtmIfIispCalledAScrAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..40)  

mscAtmIfIispCalledAScrAddrAddressActionIndex 1.3.6.1.4.1.562.36.2.1.114.7.6.2.1.1.11
This variable represents an index for the mscAtmIfIispCalledAScrAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER accept(0), reject(1)  

mscAtmIfVptIisp 1.3.6.1.4.1.562.36.2.1.114.9.6
OBJECT IDENTIFIER    

mscAtmIfVptIispRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.6.1
This entry controls the addition and deletion of mscAtmIfVptIisp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispRowStatusEntry

mscAtmIfVptIispRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.1.1
A single entry in the table represents a single mscAtmIfVptIisp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispRowStatusEntry  

mscAtmIfVptIispRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.6.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptIisp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptIispComponentName 1.3.6.1.4.1.562.36.2.1.114.9.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptIispStorageType 1.3.6.1.4.1.562.36.2.1.114.9.6.1.1.4
This variable represents the storage type value for the mscAtmIfVptIisp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVptIispIndex 1.3.6.1.4.1.562.36.2.1.114.9.6.1.1.10
This variable represents the index for the mscAtmIfVptIisp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptIispProvTable 1.3.6.1.4.1.562.36.2.1.114.9.6.10
This group contains the provisionable attributes for the Iisp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispProvEntry

mscAtmIfVptIispProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.10.1
An entry in the mscAtmIfVptIispProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispProvEntry  

mscAtmIfVptIispVersion 1.3.6.1.4.1.562.36.2.1.114.9.6.10.1.1
This attribute indicates which specification the IISP interface complies with. The options are iisp10Sig30 which refers to IISP version 1.0 with 3.0 signalling and iisp10Sig31 which refers to IISP version 1.0 with 3.1 signalling. If this attribute is changed, all switched Vcc components in this interface are cleared due to the fact that the two versions are incompatible.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER iisp10Sig30(2), iisp10Sig31(3)  

mscAtmIfVptIispSide 1.3.6.1.4.1.562.36.2.1.114.9.6.10.1.2
This attribute indicates which side the interface is, user or network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER networkSide(0), userSide(1)  

mscAtmIfVptIispSoftPvcRetryPeriod 1.3.6.1.4.1.562.36.2.1.114.9.6.10.1.3
This attribute specifies the time to wait between call set up retries. The resolution is to the nearest 10 seconds. This attribute has been obsoleted and is replaced by the softPvpAndPvcRetryPeriod attribute.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 20..999999  

mscAtmIfVptIispSoftPvpAndPvcRetryPeriod 1.3.6.1.4.1.562.36.2.1.114.9.6.10.1.4
This attribute specifies the time to wait between soft PVP or soft PVC call setup retries. The resolution is to the nearest 10 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 20..999999  

mscAtmIfVptIispSoftPvpAndPvcHoldOffTime 1.3.6.1.4.1.562.36.2.1.114.9.6.10.1.5
This attribute specifies how long to hold off retries following a release or the connection. The resolution is to the nearest 50 ms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 50..20000  

mscAtmIfVptIispAcctOptTable 1.3.6.1.4.1.562.36.2.1.114.9.6.11
This group contains the provisionable attributes for accounting.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispAcctOptEntry

mscAtmIfVptIispAcctOptEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.11.1
An entry in the mscAtmIfVptIispAcctOptTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispAcctOptEntry  

mscAtmIfVptIispAccountCollection 1.3.6.1.4.1.562.36.2.1.114.9.6.11.1.1
This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit, or force. If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts). If none of the reasons is present, then accounting will be suppressed. The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscAtmIfVptIispAccountConnectionType 1.3.6.1.4.1.562.36.2.1.114.9.6.11.1.2
This attribute specifies whether accounting records generated by this interface should be marked as originating, terminating or intermediate. This attribute, in combination with the direction of the call, determines the value of attribute connPointType of the accounting record and may be used by downstream accounting processes to correlate the records. If the value is origTerm then records generated for incoming calls will be marked as originating and records generated for outgoing calls will be marked as terminating. If the value is intermediate then records generated for all calls will be marked as intermediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER origTerm(0), intermediate(1)  

mscAtmIfVptIispAccountClass 1.3.6.1.4.1.562.36.2.1.114.9.6.11.1.3
This attribute specifies the accounting class associated with the interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingServiceType or calledServiceType as appropriate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVptIispServiceExchange 1.3.6.1.4.1.562.36.2.1.114.9.6.11.1.4
This attribute specifies the data service exchange associated with this interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingDse or calledDse as appropriate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVptIispVProvTable 1.3.6.1.4.1.562.36.2.1.114.9.6.12
This group contains the provisionable attributes for the Iisp component which are specific to virtual IISP interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispVProvEntry

mscAtmIfVptIispVProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.12.1
An entry in the mscAtmIfVptIispVProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispVProvEntry  

mscAtmIfVptIispVpci 1.3.6.1.4.1.562.36.2.1.114.9.6.12.1.1
This attribute specifies the Virtual Path Connection Identifier (VPCI) to be used between this signalling entity and its peer. The VPCI of the peer virtual IISP must have the same value for switched connections to be set up across the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVptIispSig 1.3.6.1.4.1.562.36.2.1.114.9.6.3
OBJECT IDENTIFIER    

mscAtmIfVptIispSigRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.6.3.1
This entry controls the addition and deletion of mscAtmIfVptIispSig components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispSigRowStatusEntry

mscAtmIfVptIispSigRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.3.1.1
A single entry in the table represents a single mscAtmIfVptIispSig component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispSigRowStatusEntry  

mscAtmIfVptIispSigRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.6.3.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptIispSig components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptIispSigComponentName 1.3.6.1.4.1.562.36.2.1.114.9.6.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptIispSigStorageType 1.3.6.1.4.1.562.36.2.1.114.9.6.3.1.1.4
This variable represents the storage type value for the mscAtmIfVptIispSig tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVptIispSigIndex 1.3.6.1.4.1.562.36.2.1.114.9.6.3.1.1.10
This variable represents the index for the mscAtmIfVptIispSig tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptIispSigProvTable 1.3.6.1.4.1.562.36.2.1.114.9.6.3.10
This attribute group contains the provisionable attributes for the Signalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispSigProvEntry

mscAtmIfVptIispSigProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.3.10.1
An entry in the mscAtmIfVptIispSigProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispSigProvEntry  

mscAtmIfVptIispSigVci 1.3.6.1.4.1.562.36.2.1.114.9.6.3.10.1.1
This attribute specifies the signalling channel number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAtmIfVptIispSigAddressConversion 1.3.6.1.4.1.562.36.2.1.114.9.6.3.10.1.2
This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), nativeE164(1), nsap(2)  

mscAtmIfVptIispSigOperatingMode 1.3.6.1.4.1.562.36.2.1.114.9.6.3.10.1.3
This attribute specifies the operating mode of the signaling channel. provisionedOnly indicates that only SPVCs and SPVPs are supported on the interface and SVCs are not supported. This value is permitted only on UNI interfaces. normal indicates that SVCs, SPVCs, and SPVPs are supported on the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), provisionedOnly(1)  

mscAtmIfVptIispSigStateTable 1.3.6.1.4.1.562.36.2.1.114.9.6.3.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispSigStateEntry

mscAtmIfVptIispSigStateEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.3.11.1
An entry in the mscAtmIfVptIispSigStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispSigStateEntry  

mscAtmIfVptIispSigAdminState 1.3.6.1.4.1.562.36.2.1.114.9.6.3.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscAtmIfVptIispSigOperationalState 1.3.6.1.4.1.562.36.2.1.114.9.6.3.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAtmIfVptIispSigUsageState 1.3.6.1.4.1.562.36.2.1.114.9.6.3.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscAtmIfVptIispSigOperTable 1.3.6.1.4.1.562.36.2.1.114.9.6.3.12
This attribute contains the operational attributes for the AtmSignalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispSigOperEntry

mscAtmIfVptIispSigOperEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.3.12.1
An entry in the mscAtmIfVptIispSigOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispSigOperEntry  

mscAtmIfVptIispSigLastTxCauseCode 1.3.6.1.4.1.562.36.2.1.114.9.6.3.12.1.1
This attribute indicates the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVptIispSigLastTxDiagCode 1.3.6.1.4.1.562.36.2.1.114.9.6.3.12.1.2
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

mscAtmIfVptIispSigLastRxCauseCode 1.3.6.1.4.1.562.36.2.1.114.9.6.3.12.1.3
This attribute contains the cause code in the last received signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVptIispSigLastRxDiagCode 1.3.6.1.4.1.562.36.2.1.114.9.6.3.12.1.4
This attribute contains the diagnostic code in the last received signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

mscAtmIfVptIispSigStatsTable 1.3.6.1.4.1.562.36.2.1.114.9.6.3.13
This attribute group contains the statistics associated with the AtmSignalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispSigStatsEntry

mscAtmIfVptIispSigStatsEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.3.13.1
An entry in the mscAtmIfVptIispSigStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispSigStatsEntry  

mscAtmIfVptIispSigCurrentConnections 1.3.6.1.4.1.562.36.2.1.114.9.6.3.13.1.1
This attribute indicates the total number of currently active connections.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfVptIispSigPeakConnections 1.3.6.1.4.1.562.36.2.1.114.9.6.3.13.1.2
This attribute indicates the high water mark of active point-to- point and point-to-multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfVptIispSigSuccessfulConnections 1.3.6.1.4.1.562.36.2.1.114.9.6.3.13.1.3
This attribute counts the total number of switched point-to- point and point-to-multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfVptIispSigFailedConnections 1.3.6.1.4.1.562.36.2.1.114.9.6.3.13.1.4
This attribute counts the total number of switched connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfVptIispSigTxPdus 1.3.6.1.4.1.562.36.2.1.114.9.6.3.13.1.5
This attribute counts the number of transmitted signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfVptIispSigRxPdus 1.3.6.1.4.1.562.36.2.1.114.9.6.3.13.1.6
This attribute counts the number of received signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfVptIispSigCurrentPmpConnections 1.3.6.1.4.1.562.36.2.1.114.9.6.3.13.1.7
This attribute indicates the number of currently active point-to- multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfVptIispSigPeakPmpConnections 1.3.6.1.4.1.562.36.2.1.114.9.6.3.13.1.8
This attribute indicates the high water mark of active point-to- multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfVptIispSigSuccessfulPmpConnections 1.3.6.1.4.1.562.36.2.1.114.9.6.3.13.1.9
This attribute counts the total number of switched point-to- multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfVptIispSigFailedPmpConnections 1.3.6.1.4.1.562.36.2.1.114.9.6.3.13.1.10
This attribute counts the number of switched point-to- multipoint connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfVptIispSigNewCurrentConnections 1.3.6.1.4.1.562.36.2.1.114.9.6.3.13.1.11
This attribute indicates the total number of currently active point-to- point and point-to-multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfVptIispSigVcd 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2
OBJECT IDENTIFIER    

mscAtmIfVptIispSigVcdRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.1
This entry controls the addition and deletion of mscAtmIfVptIispSigVcd components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispSigVcdRowStatusEntry

mscAtmIfVptIispSigVcdRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.1.1
A single entry in the table represents a single mscAtmIfVptIispSigVcd component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispSigVcdRowStatusEntry  

mscAtmIfVptIispSigVcdRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptIispSigVcd components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptIispSigVcdComponentName 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptIispSigVcdStorageType 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.1.1.4
This variable represents the storage type value for the mscAtmIfVptIispSigVcd tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVptIispSigVcdIndex 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.1.1.10
This variable represents the index for the mscAtmIfVptIispSigVcd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptIispSigVcdProvTable 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.10
This group contains the provisionable traffic attributes for a control channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispSigVcdProvEntry

mscAtmIfVptIispSigVcdProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.10.1
An entry in the mscAtmIfVptIispSigVcdProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispSigVcdProvEntry  

mscAtmIfVptIispSigVcdTrafficDescType 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

mscAtmIfVptIispSigVcdAtmServiceCategory 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

mscAtmIfVptIispSigVcdWeight 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.10.1.4
This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic VPTs. When the value is set to sameAsCa, the weight is determined by the weight policy attribute under the CA service category component for all but standard VPT VCCs. For standard VPT VCCs, the weight is determined by the VCC's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the weight policy of this connection relative to other connections. For all but standard VPT VCCs, weight policy determines the proportion of transit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard VPT VCCs, weight policy determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the VPT. When the value is set to upToQueueLimit, the weight policy is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..4095 | 65535  

mscAtmIfVptIispSigVcdQosClass 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

mscAtmIfVptIispSigVcdTrafficShaping 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

mscAtmIfVptIispSigVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

mscAtmIfVptIispSigVcdUsageParameterControl 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

mscAtmIfVptIispSigVcdTdpTable 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispSigVcdTdpEntry

mscAtmIfVptIispSigVcdTdpEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.387.1
An entry in the mscAtmIfVptIispSigVcdTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispSigVcdTdpEntry  

mscAtmIfVptIispSigVcdTdpIndex 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.387.1.1
This variable represents the mscAtmIfVptIispSigVcdTdpTable specific index for the mscAtmIfVptIispSigVcdTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..5  

mscAtmIfVptIispSigVcdTdpValue 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.387.1.2
This variable represents an individual value for the mscAtmIfVptIispSigVcdTdpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscAtmIfVptIispAddr 1.3.6.1.4.1.562.36.2.1.114.9.6.4
OBJECT IDENTIFIER    

mscAtmIfVptIispAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.6.4.1
This entry controls the addition and deletion of mscAtmIfVptIispAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispAddrRowStatusEntry

mscAtmIfVptIispAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.4.1.1
A single entry in the table represents a single mscAtmIfVptIispAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispAddrRowStatusEntry  

mscAtmIfVptIispAddrRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.6.4.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptIispAddr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptIispAddrComponentName 1.3.6.1.4.1.562.36.2.1.114.9.6.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptIispAddrStorageType 1.3.6.1.4.1.562.36.2.1.114.9.6.4.1.1.4
This variable represents the storage type value for the mscAtmIfVptIispAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVptIispAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.114.9.6.4.1.1.10
This variable represents an index for the mscAtmIfVptIispAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..40)  

mscAtmIfVptIispAddrAddressTypeIndex 1.3.6.1.4.1.562.36.2.1.114.9.6.4.1.1.11
This variable represents an index for the mscAtmIfVptIispAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER primary(0), alternate(1), default(3)  

mscAtmIfVptIispAddrOperTable 1.3.6.1.4.1.562.36.2.1.114.9.6.4.10
This attribute group contains the operational attributes for the Address component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispAddrOperEntry

mscAtmIfVptIispAddrOperEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.4.10.1
An entry in the mscAtmIfVptIispAddrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispAddrOperEntry  

mscAtmIfVptIispAddrScope 1.3.6.1.4.1.562.36.2.1.114.9.6.4.10.1.1
This attribute indicates the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy. If no PnniInfo subcomponent has been provisioned, then the scope will default to the level of this node in the PNNI hierarchy. If this node does not participate in a PNNI hierarchy, then this attribute will have the value of -1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..104  

mscAtmIfVptIispAddrReachability 1.3.6.1.4.1.562.36.2.1.114.9.6.4.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

mscAtmIfVptIispAddrTermSP 1.3.6.1.4.1.562.36.2.1.114.9.6.4.2
OBJECT IDENTIFIER    

mscAtmIfVptIispAddrTermSPRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.6.4.2.1
This entry controls the addition and deletion of mscAtmIfVptIispAddrTermSP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispAddrTermSPRowStatusEntry

mscAtmIfVptIispAddrTermSPRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.4.2.1.1
A single entry in the table represents a single mscAtmIfVptIispAddrTermSP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispAddrTermSPRowStatusEntry  

mscAtmIfVptIispAddrTermSPRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.6.4.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptIispAddrTermSP components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptIispAddrTermSPComponentName 1.3.6.1.4.1.562.36.2.1.114.9.6.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptIispAddrTermSPStorageType 1.3.6.1.4.1.562.36.2.1.114.9.6.4.2.1.1.4
This variable represents the storage type value for the mscAtmIfVptIispAddrTermSP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVptIispAddrTermSPIndex 1.3.6.1.4.1.562.36.2.1.114.9.6.4.2.1.1.10
This variable represents the index for the mscAtmIfVptIispAddrTermSP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptIispAddrPnniInfo 1.3.6.1.4.1.562.36.2.1.114.9.6.4.3
OBJECT IDENTIFIER    

mscAtmIfVptIispAddrPnniInfoRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.6.4.3.1
This entry controls the addition and deletion of mscAtmIfVptIispAddrPnniInfo components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispAddrPnniInfoRowStatusEntry

mscAtmIfVptIispAddrPnniInfoRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.4.3.1.1
A single entry in the table represents a single mscAtmIfVptIispAddrPnniInfo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispAddrPnniInfoRowStatusEntry  

mscAtmIfVptIispAddrPnniInfoRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.6.4.3.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptIispAddrPnniInfo components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptIispAddrPnniInfoComponentName 1.3.6.1.4.1.562.36.2.1.114.9.6.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptIispAddrPnniInfoStorageType 1.3.6.1.4.1.562.36.2.1.114.9.6.4.3.1.1.4
This variable represents the storage type value for the mscAtmIfVptIispAddrPnniInfo tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVptIispAddrPnniInfoIndex 1.3.6.1.4.1.562.36.2.1.114.9.6.4.3.1.1.10
This variable represents the index for the mscAtmIfVptIispAddrPnniInfo tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptIispAddrPnniInfoProvTable 1.3.6.1.4.1.562.36.2.1.114.9.6.4.3.10
This attribute group contains the provisioned attributes relating to PNNI for a PnniInfo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispAddrPnniInfoProvEntry

mscAtmIfVptIispAddrPnniInfoProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.4.3.10.1
An entry in the mscAtmIfVptIispAddrPnniInfoProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispAddrPnniInfoProvEntry  

mscAtmIfVptIispAddrPnniInfoScope 1.3.6.1.4.1.562.36.2.1.114.9.6.4.3.10.1.1
This attribute specifies the scope of the ATM address, which is the highest level up to which this address will be advertised in the PNNI hierarchy. The scope must be set to a value numerically less than or equal to the level of the lowest level peer group containing this node. Setting the scope to 0 will cause the address to be advertised globally within this PNNI routing domain.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1..104  

mscAtmIfVptIispAddrPnniInfoReachability 1.3.6.1.4.1.562.36.2.1.114.9.6.4.3.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

mscAtmIfVptIispCallingAScr 1.3.6.1.4.1.562.36.2.1.114.9.6.5
OBJECT IDENTIFIER    

mscAtmIfVptIispCallingAScrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.6.5.1
This entry controls the addition and deletion of mscAtmIfVptIispCallingAScr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispCallingAScrRowStatusEntry

mscAtmIfVptIispCallingAScrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.5.1.1
A single entry in the table represents a single mscAtmIfVptIispCallingAScr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispCallingAScrRowStatusEntry  

mscAtmIfVptIispCallingAScrRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.6.5.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptIispCallingAScr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptIispCallingAScrComponentName 1.3.6.1.4.1.562.36.2.1.114.9.6.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptIispCallingAScrStorageType 1.3.6.1.4.1.562.36.2.1.114.9.6.5.1.1.4
This variable represents the storage type value for the mscAtmIfVptIispCallingAScr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVptIispCallingAScrIndex 1.3.6.1.4.1.562.36.2.1.114.9.6.5.1.1.10
This variable represents the index for the mscAtmIfVptIispCallingAScr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptIispCallingAScrProvTable 1.3.6.1.4.1.562.36.2.1.114.9.6.5.10
This attribute group contains the provisionable attributes for the CallingAScr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispCallingAScrProvEntry

mscAtmIfVptIispCallingAScrProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.5.10.1
An entry in the mscAtmIfVptIispCallingAScrProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispCallingAScrProvEntry  

mscAtmIfVptIispCallingAScrAdminStatus 1.3.6.1.4.1.562.36.2.1.114.9.6.5.10.1.1
This attribute specifies whether the calling address screening feature is enabled or disabled. If enabled, incoming SVC calls are screened against provisioned addresses. If enabled and the calling address in the ATM SVC call request is provisioned to be accepted, the call is accepted or rejected according to the action specified for that address. If the value is enabled, and the calling address in the address request is not provisioned, the call is rejected If the value is disabled, no calling address screening is performed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

mscAtmIfVptIispCallingAScrDefaultInsertionAddress 1.3.6.1.4.1.562.36.2.1.114.9.6.5.10.1.2
This attribute specifies the address to be inserted into the SVC connection request if adminStatus is enabled and the connection request does not contain a calling address. If the adminStatus attribute is enabled and this attribute is empty, all incoming SVC calls which do not contain a calling address are rejected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..20)  

mscAtmIfVptIispCallingAScrStatTable 1.3.6.1.4.1.562.36.2.1.114.9.6.5.11
This attribute group contains statistics related to the incoming SVC call requests received while the adminStatus attribute is set to enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispCallingAScrStatEntry

mscAtmIfVptIispCallingAScrStatEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.5.11.1
An entry in the mscAtmIfVptIispCallingAScrStatTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispCallingAScrStatEntry  

mscAtmIfVptIispCallingAScrAcceptedCalls 1.3.6.1.4.1.562.36.2.1.114.9.6.5.11.1.1
This attribute counts the incoming SVC calls which were accepted because the address specified in the call request matched a provisioned ATM address and the associated action was accept. When the counter exceeds the maximum, it wraps to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfVptIispCallingAScrRejectedCalls 1.3.6.1.4.1.562.36.2.1.114.9.6.5.11.1.2
This attribute counts the incoming SVC calls which were rejected because the address specified in the call request matched a provisioned ATM address, but the associated action was reject. When the counter exceeds the maximum, it wraps to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfVptIispCallingAScrUnmatchedCalls 1.3.6.1.4.1.562.36.2.1.114.9.6.5.11.1.3
This attribute counts the incoming SVC calls which were rejected because none of the provisioned ATM addresses matched the applicable address in the incoming SVC call request. When the counter exceeds the maximum, it wraps to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfVptIispCallingAScrAddr 1.3.6.1.4.1.562.36.2.1.114.9.6.5.2
OBJECT IDENTIFIER    

mscAtmIfVptIispCallingAScrAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.6.5.2.1
This entry controls the addition and deletion of mscAtmIfVptIispCallingAScrAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispCallingAScrAddrRowStatusEntry

mscAtmIfVptIispCallingAScrAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.5.2.1.1
A single entry in the table represents a single mscAtmIfVptIispCallingAScrAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispCallingAScrAddrRowStatusEntry  

mscAtmIfVptIispCallingAScrAddrRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.6.5.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptIispCallingAScrAddr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptIispCallingAScrAddrComponentName 1.3.6.1.4.1.562.36.2.1.114.9.6.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptIispCallingAScrAddrStorageType 1.3.6.1.4.1.562.36.2.1.114.9.6.5.2.1.1.4
This variable represents the storage type value for the mscAtmIfVptIispCallingAScrAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVptIispCallingAScrAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.114.9.6.5.2.1.1.10
This variable represents an index for the mscAtmIfVptIispCallingAScrAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..40)  

mscAtmIfVptIispCallingAScrAddrAddressActionIndex 1.3.6.1.4.1.562.36.2.1.114.9.6.5.2.1.1.11
This variable represents an index for the mscAtmIfVptIispCallingAScrAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER accept(0), reject(1)  

mscAtmIfVptIispCalledAScr 1.3.6.1.4.1.562.36.2.1.114.9.6.6
OBJECT IDENTIFIER    

mscAtmIfVptIispCalledAScrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.6.6.1
This entry controls the addition and deletion of mscAtmIfVptIispCalledAScr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispCalledAScrRowStatusEntry

mscAtmIfVptIispCalledAScrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.6.1.1
A single entry in the table represents a single mscAtmIfVptIispCalledAScr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispCalledAScrRowStatusEntry  

mscAtmIfVptIispCalledAScrRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.6.6.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptIispCalledAScr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptIispCalledAScrComponentName 1.3.6.1.4.1.562.36.2.1.114.9.6.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptIispCalledAScrStorageType 1.3.6.1.4.1.562.36.2.1.114.9.6.6.1.1.4
This variable represents the storage type value for the mscAtmIfVptIispCalledAScr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVptIispCalledAScrIndex 1.3.6.1.4.1.562.36.2.1.114.9.6.6.1.1.10
This variable represents the index for the mscAtmIfVptIispCalledAScr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptIispCalledAScrProvTable 1.3.6.1.4.1.562.36.2.1.114.9.6.6.10
This attribute group contains the provisionable attributes for the CalledAScr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispCalledAScrProvEntry

mscAtmIfVptIispCalledAScrProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.6.10.1
An entry in the mscAtmIfVptIispCalledAScrProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispCalledAScrProvEntry  

mscAtmIfVptIispCalledAScrAdminStatus 1.3.6.1.4.1.562.36.2.1.114.9.6.6.10.1.1
This attribute specifies whether the called address screening feature is enabled or disabled. If the value is enabled, incoming SVC calls will be screened against provisioned called addresses. If the value is enabled and the called address in the ATM SVC call request has been provisioned, the call is accepted or rejected according to the action specified for that address. If the value is enabled and the called address in the call request is not provisioned, the call is rejected. If the value is disabled, no called address screening is performed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

mscAtmIfVptIispCalledAScrStatTable 1.3.6.1.4.1.562.36.2.1.114.9.6.6.11
This attribute group contains statistics related to the incoming SVC call requests received while the adminStatus attribute is set to enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispCalledAScrStatEntry

mscAtmIfVptIispCalledAScrStatEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.6.11.1
An entry in the mscAtmIfVptIispCalledAScrStatTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispCalledAScrStatEntry  

mscAtmIfVptIispCalledAScrAcceptedCalls 1.3.6.1.4.1.562.36.2.1.114.9.6.6.11.1.1
This attribute counts the incoming SVC calls which were accepted because the address specified in the call request matched a provisioned ATM address and the associated action was accept. When the counter exceeds the maximum, it wraps to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfVptIispCalledAScrRejectedCalls 1.3.6.1.4.1.562.36.2.1.114.9.6.6.11.1.2
This attribute counts the incoming SVC calls which were rejected because the address specified in the call request matched a provisioned ATM address, but the associated action was reject. When the counter exceeds the maximum, it wraps to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfVptIispCalledAScrUnmatchedCalls 1.3.6.1.4.1.562.36.2.1.114.9.6.6.11.1.3
This attribute counts the incoming SVC calls which were rejected because none of the provisioned ATM addresses matched the applicable address in the incoming SVC call request. When the counter exceeds the maximum, it wraps to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscAtmIfVptIispCalledAScrAddr 1.3.6.1.4.1.562.36.2.1.114.9.6.6.2
OBJECT IDENTIFIER    

mscAtmIfVptIispCalledAScrAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.6.6.2.1
This entry controls the addition and deletion of mscAtmIfVptIispCalledAScrAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptIispCalledAScrAddrRowStatusEntry

mscAtmIfVptIispCalledAScrAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.6.6.2.1.1
A single entry in the table represents a single mscAtmIfVptIispCalledAScrAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscAtmIfVptIispCalledAScrAddrRowStatusEntry  

mscAtmIfVptIispCalledAScrAddrRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.6.6.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptIispCalledAScrAddr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptIispCalledAScrAddrComponentName 1.3.6.1.4.1.562.36.2.1.114.9.6.6.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptIispCalledAScrAddrStorageType 1.3.6.1.4.1.562.36.2.1.114.9.6.6.2.1.1.4
This variable represents the storage type value for the mscAtmIfVptIispCalledAScrAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscAtmIfVptIispCalledAScrAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.114.9.6.6.2.1.1.10
This variable represents an index for the mscAtmIfVptIispCalledAScrAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..40)  

mscAtmIfVptIispCalledAScrAddrAddressActionIndex 1.3.6.1.4.1.562.36.2.1.114.9.6.6.2.1.1.11
This variable represents an index for the mscAtmIfVptIispCalledAScrAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER accept(0), reject(1)  

atmIispGroup 1.3.6.1.4.1.562.36.2.2.70.1
OBJECT IDENTIFIER    

atmIispGroupCA 1.3.6.1.4.1.562.36.2.2.70.1.1
OBJECT IDENTIFIER    

atmIispGroupCA02 1.3.6.1.4.1.562.36.2.2.70.1.1.3
OBJECT IDENTIFIER    

atmIispGroupCA02A 1.3.6.1.4.1.562.36.2.2.70.1.1.3.2
OBJECT IDENTIFIER    

atmIispCapabilities 1.3.6.1.4.1.562.36.2.2.70.3
OBJECT IDENTIFIER    

atmIispCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.70.3.1
OBJECT IDENTIFIER    

atmIispCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.70.3.1.3
OBJECT IDENTIFIER    

atmIispCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.70.3.1.3.2
OBJECT IDENTIFIER    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor