Nortel-Magellan-Passport-X25DteMIB
File:
Nortel-Magellan-Passport-X25DteMIB.mib (149832 bytes)
Imported modules
Imported symbols
Defined Types
X25DteRowStatusEntry |
|
SEQUENCE |
|
|
|
|
x25DteRowStatus |
RowStatus |
|
|
x25DteComponentName |
DisplayString |
|
|
x25DteStorageType |
StorageType |
|
|
x25DteIndex |
Integer32 |
|
X25DteCidDataEntry |
|
SEQUENCE |
|
|
|
|
x25DteCustomerIdentifier |
Unsigned32 |
|
X25DteIfEntry |
|
SEQUENCE |
|
|
|
|
x25DteInterfaceMode |
INTEGER |
|
|
x25DteMaxActiveChannels |
Unsigned32 |
|
|
x25DteNumberOfPLcn |
Unsigned32 |
|
|
x25DtePacketSequencing |
INTEGER |
|
|
x25DteT20RestartTimer |
Unsigned32 |
|
|
x25DteT21CallTimer |
Unsigned32 |
|
|
x25DteT22ResetTimer |
Unsigned32 |
|
|
x25DteT23ClearTimer |
Unsigned32 |
|
X25DteLcnCEntry |
|
SEQUENCE |
|
|
|
|
x25DteLowestILChannelNumber |
Unsigned32 |
|
|
x25DteHighestILChannelNumber |
Unsigned32 |
|
|
x25DteLowestTLChannelNumber |
Unsigned32 |
|
|
x25DteHighestTLChannelNumber |
Unsigned32 |
|
|
x25DteLowestOLChannelNumber |
Unsigned32 |
|
|
x25DteHighestOLChannelNumber |
Unsigned32 |
|
X25DteDcpEntry |
|
SEQUENCE |
|
|
|
|
x25DteInPacketSize |
Unsigned32 |
|
|
x25DteOutPacketSize |
Unsigned32 |
|
|
x25DteInWindowSize |
Unsigned32 |
|
|
x25DteOutWindowSize |
Unsigned32 |
|
|
x25DteAcceptReverseCharging |
INTEGER |
|
|
x25DteProposeReverseCharging |
INTEGER |
|
|
x25DteOutThroughputClassSize |
INTEGER |
|
|
x25DteInThroughputClassSize |
INTEGER |
|
|
x25DteCugIndex |
AsciiString |
|
|
x25DteCugoaIndex |
AsciiString |
|
|
x25DteChargingInformation |
INTEGER |
|
|
x25DteRpoa |
AsciiString |
|
|
x25DteTrnstDlySlctnAInd |
Unsigned32 |
|
|
x25DteCallingNetworkFax |
HexString |
|
|
x25DteCalledNetworkFax |
HexString |
|
|
x25DteCallUserData |
HexString |
|
X25DteIfEntryEntry |
|
SEQUENCE |
|
|
|
|
x25DteIfAdminStatus |
INTEGER |
|
|
x25DteIfIndex |
InterfaceIndex |
|
X25DteStateEntry |
|
SEQUENCE |
|
|
|
|
x25DteAdminState |
INTEGER |
|
|
x25DteOperationalState |
INTEGER |
|
|
x25DteUsageState |
INTEGER |
|
X25DteOperStatusEntry |
|
SEQUENCE |
|
|
|
|
x25DteSnmpOperStatus |
INTEGER |
|
X25DteOpEntry |
|
SEQUENCE |
|
|
|
|
x25DteInterfaceState |
INTEGER |
|
X25DteStatsEntry |
|
SEQUENCE |
|
|
|
|
x25DteInCalls |
Counter32 |
|
|
x25DteInCallRefusals |
Counter32 |
|
|
x25DteInPrvdrInitiatedClrs |
Counter32 |
|
|
x25DteInRmtInitiatedRsts |
Counter32 |
|
|
x25DteInPrvdrInitiatedRsts |
Counter32 |
|
|
x25DteInRestarts |
Counter32 |
|
|
x25DteInDataPackets |
Counter32 |
|
|
x25DteInPktsAcusdOfPrtclErr |
Counter32 |
|
|
x25DteInInterruptPackets |
Counter32 |
|
|
x25DteOutCallAttempts |
Counter32 |
|
|
x25DteOutCallFailures |
Counter32 |
|
|
x25DteOutInterruptPackets |
Counter32 |
|
|
x25DteOutDataPackets |
Counter32 |
|
|
x25DteOutActiveChannels |
Counter32 |
|
|
x25DteInActiveChannels |
Counter32 |
|
|
x25DteTwowayActiveChannels |
Counter32 |
|
|
x25DteT20RestartTimeouts |
Counter32 |
|
|
x25DteT21CallTimeouts |
Counter32 |
|
|
x25DteT22ResetTimeouts |
Counter32 |
|
|
x25DteT23ClearTimeouts |
Counter32 |
|
X25DtePeerRowStatusEntry |
|
SEQUENCE |
|
|
|
|
x25DtePeerRowStatus |
RowStatus |
|
|
x25DtePeerComponentName |
DisplayString |
|
|
x25DtePeerStorageType |
StorageType |
|
|
x25DtePeerIndex |
Integer32 |
|
X25DtePeerIfEntry |
|
SEQUENCE |
|
|
|
|
x25DtePeerEncAddressType |
INTEGER |
|
|
x25DtePeerEncAddress |
AsciiString |
|
|
x25DtePeerX25Address |
DigitString |
|
|
x25DtePeerLinkToRemoteGroup |
Link |
|
X25DtePeerCpEntry |
|
SEQUENCE |
|
|
|
|
x25DtePeerInPacketSize |
Unsigned32 |
|
|
x25DtePeerOutPacketSize |
Unsigned32 |
|
|
x25DtePeerInWindowSize |
Unsigned32 |
|
|
x25DtePeerOutWindowSize |
Unsigned32 |
|
|
x25DtePeerAcceptReverseCharging |
INTEGER |
|
|
x25DtePeerProposeReverseCharging |
INTEGER |
|
|
x25DtePeerOutThroughputClassSize |
INTEGER |
|
|
x25DtePeerInThroughputClassSize |
INTEGER |
|
|
x25DtePeerCugIndex |
AsciiString |
|
|
x25DtePeerCugoaIndex |
AsciiString |
|
|
x25DtePeerNetworkUserIdentifier |
HexString |
|
|
x25DtePeerChargingInformation |
INTEGER |
|
|
x25DtePeerRpoa |
AsciiString |
|
|
x25DtePeerTrnstDlySlctnAInd |
Unsigned32 |
|
|
x25DtePeerCallingNetworkFax |
HexString |
|
|
x25DtePeerCalledNetworkFax |
HexString |
|
|
x25DtePeerCallUserData |
HexString |
|
X25DtePeerPEncEntry |
|
SEQUENCE |
|
|
|
|
x25DtePeerPEncIndex |
Integer32 |
|
|
x25DtePeerPEncValue |
INTEGER |
|
|
x25DtePeerPEncRowStatus |
RowStatus |
|
X25DtePeerLcnEntry |
|
SEQUENCE |
|
|
|
|
x25DtePeerLcnValue |
Integer32 |
|
X25DtePLcnRowStatusEntry |
|
SEQUENCE |
|
|
|
|
x25DtePLcnRowStatus |
RowStatus |
|
|
x25DtePLcnComponentName |
DisplayString |
|
|
x25DtePLcnStorageType |
StorageType |
|
|
x25DtePLcnIndex |
Integer32 |
|
X25DtePLcnProvEntry |
|
SEQUENCE |
|
|
|
|
x25DtePLcnEncAddressType |
INTEGER |
|
|
x25DtePLcnEncAddress |
AsciiString |
|
|
x25DtePLcnProtocolEncType |
INTEGER |
|
|
x25DtePLcnLinkToRemoteGroup |
Link |
|
|
x25DtePLcnInPacketSize |
Unsigned32 |
|
|
x25DtePLcnOutPacketSize |
Unsigned32 |
|
|
x25DtePLcnInWindowSize |
Unsigned32 |
|
|
x25DtePLcnOutWindowSize |
Unsigned32 |
|
X25DteLcnRowStatusEntry |
|
SEQUENCE |
|
|
|
|
x25DteLcnRowStatus |
RowStatus |
|
|
x25DteLcnComponentName |
DisplayString |
|
|
x25DteLcnStorageType |
StorageType |
|
|
x25DteLcnIndex |
Integer32 |
|
X25DteLcnStateEntry |
|
SEQUENCE |
|
|
|
|
x25DteLcnAdminState |
INTEGER |
|
|
x25DteLcnOperationalState |
INTEGER |
|
|
x25DteLcnUsageState |
INTEGER |
|
X25DteLcnCpEntry |
|
SEQUENCE |
|
|
|
|
x25DteLcnInPacketSize |
Unsigned32 |
|
|
x25DteLcnOutPacketSize |
Unsigned32 |
|
|
x25DteLcnInWindowSize |
Unsigned32 |
|
|
x25DteLcnOutWindowSize |
Unsigned32 |
|
|
x25DteLcnProposeReverseCharging |
INTEGER |
|
|
x25DteLcnFastSelect |
INTEGER |
|
|
x25DteLcnOutThroughputClassSize |
INTEGER |
|
|
x25DteLcnInThroughputClassSize |
INTEGER |
|
|
x25DteLcnCugIndex |
AsciiString |
|
|
x25DteLcnCugoaIndex |
AsciiString |
|
|
x25DteLcnNetworkUserIdentifier |
HexString |
|
|
x25DteLcnChargingInformation |
INTEGER |
|
|
x25DteLcnRpoa |
AsciiString |
|
|
x25DteLcnTrnstDlySlctnAInd |
Unsigned32 |
|
|
x25DteLcnCallingNetworkFax |
HexString |
|
|
x25DteLcnCalledNetworkFax |
HexString |
|
|
x25DteLcnCallUserData |
HexString |
|
X25DteLcnLcnStatusEntry |
|
SEQUENCE |
|
|
|
|
x25DteLcnStatus |
INTEGER |
|
|
x25DteLcnCallDirection |
INTEGER |
|
|
x25DteLcnCalledAddress |
DigitString |
|
|
x25DteLcnCallingAddress |
DigitString |
|
|
x25DteLcnOriginalCalledAddress |
DigitString |
|
X25DteLcnStatsEntry |
|
SEQUENCE |
|
|
|
|
x25DteLcnInUknownProtocols |
Counter32 |
|
|
x25DteLcnInDataOctets |
Counter32 |
|
|
x25DteLcnInDataPackets |
Counter32 |
|
|
x25DteLcnInRmtInitiatedRsts |
Counter32 |
|
|
x25DteLcnInPrvdrInitiatedRsts |
Counter32 |
|
|
x25DteLcnInInterruptPackets |
Counter32 |
|
|
x25DteLcnOutDataOctets |
Counter32 |
|
|
x25DteLcnOutDataPackets |
Counter32 |
|
|
x25DteLcnOutInterruptPackets |
Counter32 |
|
|
x25DteLcnT22ResetTimeouts |
Counter32 |
|
X25DteLapbRowStatusEntry |
|
SEQUENCE |
|
|
|
|
x25DteLapbRowStatus |
RowStatus |
|
|
x25DteLapbComponentName |
DisplayString |
|
|
x25DteLapbStorageType |
StorageType |
|
|
x25DteLapbIndex |
NonReplicated |
|
X25DteLapbCpEntry |
|
SEQUENCE |
|
|
|
|
x25DteLapbStationType |
INTEGER |
|
|
x25DteLapbFrameSequencing |
INTEGER |
|
|
x25DteLapbN1FrameSize |
Unsigned32 |
|
|
x25DteLapbKWindowSize |
Unsigned32 |
|
|
x25DteLapbN2TransmitLimit |
Unsigned32 |
|
|
x25DteLapbT1AckTimer |
Unsigned32 |
|
|
x25DteLapbT2AckDelayTimer |
Unsigned32 |
|
|
x25DteLapbT4IdleProbeTimer |
Unsigned32 |
|
|
x25DteLapbActionInitiate |
INTEGER |
|
|
x25DteLapbActionRecvDM |
INTEGER |
|
|
x25DteLapbTxQDegradeThreshold |
Unsigned32 |
|
|
x25DteLapbTxQResetThreshold |
Unsigned32 |
|
X25DteLapbStateEntry |
|
SEQUENCE |
|
|
|
|
x25DteLapbAdminState |
INTEGER |
|
|
x25DteLapbOperationalState |
INTEGER |
|
|
x25DteLapbUsageState |
INTEGER |
|
X25DteLapbStatusEntry |
|
SEQUENCE |
|
|
|
|
x25DteLapbCurrentState |
INTEGER |
|
|
x25DteLapbLastStateChangeReason |
INTEGER |
|
|
x25DteLapbFrmrTransmit |
HexString |
|
|
x25DteLapbFrmrReceive |
HexString |
|
|
x25DteLapbCurrentQueueSize |
Unsigned32 |
|
X25DteLapbStatsEntry |
|
SEQUENCE |
|
|
|
|
x25DteLapbStateChanges |
Counter32 |
|
|
x25DteLapbRemoteBusy |
Counter32 |
|
|
x25DteLapbTransmitRejectFrames |
Counter32 |
|
|
x25DteLapbReceiveRejectFrames |
Counter32 |
|
|
x25DteLapbT1AckTimeout |
Counter32 |
|
X25DteLapbFramerRowStatusEntry |
|
SEQUENCE |
|
|
|
|
x25DteLapbFramerRowStatus |
RowStatus |
|
|
x25DteLapbFramerComponentName |
DisplayString |
|
|
x25DteLapbFramerStorageType |
StorageType |
|
|
x25DteLapbFramerIndex |
NonReplicated |
|
X25DteLapbFramerProvEntry |
|
SEQUENCE |
|
|
|
|
x25DteLapbFramerInterfaceName |
Link |
|
X25DteLapbFramerLinkEntry |
|
SEQUENCE |
|
|
|
|
x25DteLapbFramerFlagsBetweenFrames |
Unsigned32 |
|
X25DteLapbFramerStateEntry |
|
SEQUENCE |
|
|
|
|
x25DteLapbFramerAdminState |
INTEGER |
|
|
x25DteLapbFramerOperationalState |
INTEGER |
|
|
x25DteLapbFramerUsageState |
INTEGER |
|
X25DteLapbFramerStatsEntry |
|
SEQUENCE |
|
|
|
|
x25DteLapbFramerFrmToIf |
Counter32 |
|
|
x25DteLapbFramerFrmFromIf |
Counter32 |
|
|
x25DteLapbFramerOctetFromIf |
Counter32 |
|
|
x25DteLapbFramerAborts |
Counter32 |
|
|
x25DteLapbFramerCrcErrors |
Counter32 |
|
|
x25DteLapbFramerLrcErrors |
Counter32 |
|
|
x25DteLapbFramerNonOctetErrors |
Counter32 |
|
|
x25DteLapbFramerOverruns |
Counter32 |
|
|
x25DteLapbFramerUnderruns |
Counter32 |
|
X25DteLapbFramerUtilEntry |
|
SEQUENCE |
|
|
|
|
x25DteLapbFramerNormPrioLinkUtilToIf |
Gauge32 |
|
|
x25DteLapbFramerNormPrioLinkUtilFromIf |
Gauge32 |
|
X25DtePleRowStatusEntry |
|
SEQUENCE |
|
|
|
|
x25DtePleRowStatus |
RowStatus |
|
|
x25DtePleComponentName |
DisplayString |
|
|
x25DtePleStorageType |
StorageType |
|
|
x25DtePleIndex |
NonReplicated |
|
X25DtePleProvEntry |
|
SEQUENCE |
|
|
|
|
x25DtePleInactivityTimer |
Unsigned32 |
|
X25DtePleOpEntry |
|
SEQUENCE |
|
|
|
|
x25DtePleEncAddrToX25LkupFlrs |
Unsigned32 |
|
|
x25DtePleLastFailedEncAddr |
HexString |
|
|
x25DtePleX25AddrToEncLkupFlrs |
Unsigned32 |
|
|
x25DtePleLastFailedX25Addr |
DigitString |
|
X25DteRgRowStatusEntry |
|
SEQUENCE |
|
|
|
|
x25DteRgRowStatus |
RowStatus |
|
|
x25DteRgComponentName |
DisplayString |
|
|
x25DteRgStorageType |
StorageType |
|
|
x25DteRgIndex |
Integer32 |
|
X25DteRgIfEntryEntry |
|
SEQUENCE |
|
|
|
|
x25DteRgIfAdminStatus |
INTEGER |
|
|
x25DteRgIfIndex |
InterfaceIndex |
|
X25DteRgProvEntry |
|
SEQUENCE |
|
|
|
|
x25DteRgLinkToProtocolPort |
Link |
|
|
x25DteRgLocalAddress |
DigitString |
|
|
x25DteRgMtuSize |
Unsigned32 |
|
X25DteRgStateEntry |
|
SEQUENCE |
|
|
|
|
x25DteRgAdminState |
INTEGER |
|
|
x25DteRgOperationalState |
INTEGER |
|
|
x25DteRgUsageState |
INTEGER |
|
X25DteRgOperStatusEntry |
|
SEQUENCE |
|
|
|
|
x25DteRgSnmpOperStatus |
INTEGER |
|
X25DteRgLTPlcnEntry |
|
SEQUENCE |
|
|
|
|
x25DteRgLTPlcnValue |
Link |
|
|
x25DteRgLTPlcnRowStatus |
RowStatus |
|
X25DteRgLtPeerEntry |
|
SEQUENCE |
|
|
|
|
x25DteRgLtPeerValue |
Link |
|
|
x25DteRgLtPeerRowStatus |
RowStatus |
|
X25DteRgLcnEntry |
|
SEQUENCE |
|
|
|
|
x25DteRgLcnValue |
Integer32 |
|
Defined Values
x25DteMIB |
1.3.6.1.4.1.562.2.4.2.48 |
OBJECT IDENTIFIER |
|
|
|
x25Dte |
1.3.6.1.4.1.562.2.4.1.90 |
OBJECT IDENTIFIER |
|
|
|
x25DteRowStatusTable |
1.3.6.1.4.1.562.2.4.1.90.1 |
This entry controls the addition and deletion of
x25Dte components. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteRowStatusEntry |
|
x25DteRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.90.1.1 |
A single entry in the table represents a single
x25Dte component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteRowStatusEntry |
|
|
x25DteRowStatus |
1.3.6.1.4.1.562.2.4.1.90.1.1.1 |
This variable is used as the basis for SNMP naming of
x25Dte components.
These components can be added and deleted. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
x25DteComponentName |
1.3.6.1.4.1.562.2.4.1.90.1.1.2 |
This variable provides the component's string name for
use with the ASCII Console Interface |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
x25DteStorageType |
1.3.6.1.4.1.562.2.4.1.90.1.1.4 |
This variable represents the storage type value for the
x25Dte tables. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
StorageType |
|
|
x25DteIndex |
1.3.6.1.4.1.562.2.4.1.90.1.1.10 |
This variable represents the index for the x25Dte tables. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..65535 |
|
x25DteCidDataTable |
1.3.6.1.4.1.562.2.4.1.90.20 |
This group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteCidDataEntry |
|
x25DteCidDataEntry |
1.3.6.1.4.1.562.2.4.1.90.20.1 |
An entry in the x25DteCidDataTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteCidDataEntry |
|
|
x25DteCustomerIdentifier |
1.3.6.1.4.1.562.2.4.1.90.20.1.1 |
This attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0 | 1..8191 |
|
x25DteIfTable |
1.3.6.1.4.1.562.2.4.1.90.21 |
This group provides the administrative set of parameters for the
X.25 interface. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteIfEntry |
|
x25DteIfEntry |
1.3.6.1.4.1.562.2.4.1.90.21.1 |
An entry in the x25DteIfTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteIfEntry |
|
|
x25DteInterfaceMode |
1.3.6.1.4.1.562.2.4.1.90.21.1.1 |
This attribute specifies the packet mode in which the X.25 interface
operates. When this attribute is set to dte, interface on the other side
of the physical link must be configured as a dce. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
dte(1), dce(2) |
|
x25DteMaxActiveChannels |
1.3.6.1.4.1.562.2.4.1.90.21.1.2 |
This attribute specifies the maximum number of channels that can
be active on this interface including the Permanent Lcns and the
Switched Lcns. In total maxActiveChannel will determine the
maximum number of Lcn components which may exist at a given
time. This should be set to a value greater or equal to the
numberOfPLcn provisioned. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..4095 |
|
x25DteNumberOfPLcn |
1.3.6.1.4.1.562.2.4.1.90.21.1.3 |
This attribute specifies the number of Permanent Logical Channels
that are supported on this X.25 interface (that is, the number of
PermLcn components that may be provisioned at this interface).
The PermLcn components use channel numbers starting from 1 and
up to lowestILChannelNumber.
A value of 0 for this attribute indicates that no Permanent Logical
channels are supported on this X.25 interface. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..4095 |
|
x25DtePacketSequencing |
1.3.6.1.4.1.562.2.4.1.90.21.1.4 |
This attribute specifies the sequence numbering of packets for the
X.25 interface. The value of this attribute must be the same as the
packet sequencing configured at the X.25 interface on the other side
of the physical link. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
modulo8(1), modulo128(2) |
|
x25DteT20RestartTimer |
1.3.6.1.4.1.562.2.4.1.90.21.1.5 |
This attribute provides the period in milliseconds within which a
restart request packet should be confirmed. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1000..65536000 |
|
x25DteT21CallTimer |
1.3.6.1.4.1.562.2.4.1.90.21.1.6 |
This attribute provides the period in milliseconds within which a
call request packet should be confirmed. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1000..65536000 |
|
x25DteT22ResetTimer |
1.3.6.1.4.1.562.2.4.1.90.21.1.7 |
This attribute provides the period in milliseconds within which a
reset request packet should be confirmed. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1000..65536000 |
|
x25DteT23ClearTimer |
1.3.6.1.4.1.562.2.4.1.90.21.1.8 |
This attribute provides the period in milliseconds within which a
clear request packet should be confirmed. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1000..65536000 |
|
x25DteLcnCTable |
1.3.6.1.4.1.562.2.4.1.90.22 |
This group contains the provisionable attributes for the Logical
Channel configuration of the X.25 Interface. The logical channel
range table is ordered as follows:
Permanent Logical Channels(PLC),
One-way Incoming Channels (IC),
Two-way Channels(TC) and
One-way Outgoing Channels (OC),
in a consecutive manner. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteLcnCEntry |
|
x25DteLcnCEntry |
1.3.6.1.4.1.562.2.4.1.90.22.1 |
An entry in the x25DteLcnCTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLcnCEntry |
|
|
x25DteLowestILChannelNumber |
1.3.6.1.4.1.562.2.4.1.90.22.1.1 |
This attribute specifies the lowest Lcn number of the One-way
Incoming Channel range for this X.25 interface. The value for this
attribute must be greater than the numberOfPLcn attribute. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..4095 |
|
x25DteHighestILChannelNumber |
1.3.6.1.4.1.562.2.4.1.90.22.1.2 |
This attribute specifies the highest Lcn number of the One-way
Incoming Channel range for this X.25 interface. A value of 0
indicates that there are no channels in this range. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..4095 |
|
x25DteLowestTLChannelNumber |
1.3.6.1.4.1.562.2.4.1.90.22.1.3 |
This attribute specifies the lowest Lcn number of the Two-way
Channel range for this X.25 interface. The value for this attribute
must be greater than the highestILChannelNumber attribute. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..4095 |
|
x25DteHighestTLChannelNumber |
1.3.6.1.4.1.562.2.4.1.90.22.1.4 |
This attribute specifies the highest Lcn number of the Two-way
Channel range for this X.25 interface. A value of 0 indicates that
there are no channels in this range. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..4095 |
|
x25DteLowestOLChannelNumber |
1.3.6.1.4.1.562.2.4.1.90.22.1.5 |
This attribute specifies the lowest Lcn number of the One-way
Outgoing Channel range for this X.25 interface. The value for this
attribute must be greater than the highestTLChannelNumber
attribute. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..4095 |
|
x25DteHighestOLChannelNumber |
1.3.6.1.4.1.562.2.4.1.90.22.1.6 |
This attribute specifies the highest Lcn number of the One-way
Outgoing Channel range for this X.25 interface. A value of 0
indicates that there are no channels in this range. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..4095 |
|
x25DteDcpTable |
1.3.6.1.4.1.562.2.4.1.90.23 |
This group contains the provisionable attributes giving the default
call parameters used by all the logical channels during call setup. It
is possible that different default call parameters will be used for a
particular call, based on the Peer component for the given call. The
actual call parameters operational for a given call are found in the
Lcn component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteDcpEntry |
|
x25DteDcpEntry |
1.3.6.1.4.1.562.2.4.1.90.23.1 |
An entry in the x25DteDcpTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteDcpEntry |
|
|
x25DteInPacketSize |
1.3.6.1.4.1.562.2.4.1.90.23.1.1 |
This attribute specifies the maximum receive packet size in octets
for the X.25 interface. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096 |
|
x25DteOutPacketSize |
1.3.6.1.4.1.562.2.4.1.90.23.1.2 |
This attribute specifies the maximum transmit packet size in octets
for the X.25 interface. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096 |
|
x25DteInWindowSize |
1.3.6.1.4.1.562.2.4.1.90.23.1.3 |
This attribute specifies the maximum receive window size for the
X.25 interface. A window size greater than 7 is only valid when the
packetSequencing attribute is set to modulo128. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..127 |
|
x25DteOutWindowSize |
1.3.6.1.4.1.562.2.4.1.90.23.1.4 |
This attribute specifies the maximum transmit window size for the
X.25 interface. A window size greater than 7 is only valid when the
packetSequencing is set to modulo128. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..127 |
|
x25DteAcceptReverseCharging |
1.3.6.1.4.1.562.2.4.1.90.23.1.5 |
This attribute specifies whether local end will accept or refuse
charges for a call. A value of neverAccept is only used at the X.25
interface level and indicates that this interface will never accept
reverse charging (that is no Peer component can override this
parameter, allowing reverse charged calls to be accepted). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
accept(2), refuse(3), neverAccept(4) |
|
x25DteProposeReverseCharging |
1.3.6.1.4.1.562.2.4.1.90.23.1.6 |
This attribute specifies whether local/reverse charging is signalled
in the call request packet. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
reverse(2), local(3) |
|
x25DteOutThroughputClassSize |
1.3.6.1.4.1.562.2.4.1.90.23.1.8 |
This attribute specifies the value of the transmit throughput class to
be negotiated. A value of notSpecified means the facility is not
signalled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17) |
|
x25DteInThroughputClassSize |
1.3.6.1.4.1.562.2.4.1.90.23.1.9 |
This attribute specifies the value of the receive throughput class to
be negotiated. A value of notSpecified means the facility is not
signalled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17) |
|
x25DteCugIndex |
1.3.6.1.4.1.562.2.4.1.90.23.1.10 |
This attribute specifies the index of the Closed User Group facility
to signal. The index consists of two or four octets each representing
a digit in the range of 0 to 9. A value of null (empty string) at the
X.25 interface means no CUG facility is signalled. If a cugIndex is
provisioned to be signalled, the cugoaIndex attribute must be null. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
AsciiString |
Size(0..4) |
|
x25DteCugoaIndex |
1.3.6.1.4.1.562.2.4.1.90.23.1.11 |
This attribute specifies the index of the Close User Group with
Outgoing Access facility to signal. The index consists of two or four
octets each representing a digit in the range of 0 to 9. A value of
null (empty string) at the X.25 interface means no CUGOA facility
is signalled. If a cugoaIndex is provisioned to be signalled, the
cugIndex attribute must be null. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
AsciiString |
Size(0..4) |
|
x25DteRpoa |
1.3.6.1.4.1.562.2.4.1.90.23.1.14 |
This attribute specifies the value of the RPOA facility to signal in a
call request packet. The value of null (empty string) at the X.25
interface means no RPOA facility is signalled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
AsciiString |
Size(0..108) |
|
x25DteTrnstDlySlctnAInd |
1.3.6.1.4.1.562.2.4.1.90.23.1.15 |
This attribute specifies the value of the Transit Delay Selection and
Indication facility to signal in a call request packet. A value of
65536 at the X.25 interface level means no TDSAI facility is
signalled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65536 |
|
x25DteCallingNetworkFax |
1.3.6.1.4.1.562.2.4.1.90.23.1.24 |
This attribute specifies the Calling Network facilities to be signalled
in a call request packet. A value of null (empty string) at the X.25
interface means no facilities are signalled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HexString |
Size(0..108) |
|
x25DteCalledNetworkFax |
1.3.6.1.4.1.562.2.4.1.90.23.1.25 |
This attribute specifies the called network facilities to be signalled
in a call request packet. A value of null (empty string) at the X.25
interface means no facilities are signalled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HexString |
Size(0..108) |
|
x25DteCallUserData |
1.3.6.1.4.1.562.2.4.1.90.23.1.26 |
This attribute specifies the user data to be signalled in the call
request packet. A value of null (empty string) means no user data is
signalled. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HexString |
Size(0..128) |
|
x25DteIfEntryTable |
1.3.6.1.4.1.562.2.4.1.90.24 |
This group contains the provisionable attributes for the ifEntry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteIfEntryEntry |
|
x25DteIfEntryEntry |
1.3.6.1.4.1.562.2.4.1.90.24.1 |
An entry in the x25DteIfEntryTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteIfEntryEntry |
|
|
x25DteIfAdminStatus |
1.3.6.1.4.1.562.2.4.1.90.24.1.1 |
The desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
up(1), down(2), testing(3) |
|
x25DteIfIndex |
1.3.6.1.4.1.562.2.4.1.90.24.1.2 |
This is the index for the IfEntry. Its value is automatically initialized
during the provisioning process. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
InterfaceIndex |
1..65535 |
|
x25DteStateTable |
1.3.6.1.4.1.562.2.4.1.90.25 |
This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteStateEntry |
|
x25DteStateEntry |
1.3.6.1.4.1.562.2.4.1.90.25.1 |
An entry in the x25DteStateTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteStateEntry |
|
|
x25DteAdminState |
1.3.6.1.4.1.562.2.4.1.90.25.1.1 |
This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
x25DteOperationalState |
1.3.6.1.4.1.562.2.4.1.90.25.1.2 |
This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
x25DteUsageState |
1.3.6.1.4.1.562.2.4.1.90.25.1.3 |
This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
idle(0), active(1), busy(2) |
|
x25DteOperStatusTable |
1.3.6.1.4.1.562.2.4.1.90.26 |
This group includes the Operational Status attribute. This attribute
defines the current operational state of this component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteOperStatusEntry |
|
x25DteOperStatusEntry |
1.3.6.1.4.1.562.2.4.1.90.26.1 |
An entry in the x25DteOperStatusTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteOperStatusEntry |
|
|
x25DteSnmpOperStatus |
1.3.6.1.4.1.562.2.4.1.90.26.1.1 |
The current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
up(1), down(2), testing(3) |
|
x25DteOpTable |
1.3.6.1.4.1.562.2.4.1.90.27 |
This group contains the operational status of the X.25 interface. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteOpEntry |
|
x25DteOpEntry |
1.3.6.1.4.1.562.2.4.1.90.27.1 |
An entry in the x25DteOpTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteOpEntry |
|
|
x25DteInterfaceState |
1.3.6.1.4.1.562.2.4.1.90.27.1.1 |
This attribute specifies the state of the interface. The notReady
state, is the initial state of the service, when it is being initialized.
The localRestarting state is entered when a Restart packet is sent to
the link and the interface is waiting for a response. The
remoteRestarting state is entered when a Restart packet is received
from the link, and is being processed. In ready state, the service is
operational and ready to provide service. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notReady(0), localRestarting(1), remoteRestarting(2), ready(3) |
|
x25DteStatsTable |
1.3.6.1.4.1.562.2.4.1.90.28 |
This component contains the statistics for the X.25 interface. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteStatsEntry |
|
x25DteStatsEntry |
1.3.6.1.4.1.562.2.4.1.90.28.1 |
An entry in the x25DteStatsTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteStatsEntry |
|
|
x25DteInCalls |
1.3.6.1.4.1.562.2.4.1.90.28.1.1 |
This attribute counts the number of call packets received from link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteInCallRefusals |
1.3.6.1.4.1.562.2.4.1.90.28.1.2 |
This attribute counts the number of calls received from the link
which have been cleared. This includes calls cleared by the X.25
interface and calls cleared by the higher level. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteInPrvdrInitiatedClrs |
1.3.6.1.4.1.562.2.4.1.90.28.1.3 |
This attribute counts the number of clear packets received from the
link with a cause code other than DTE initiated. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteInRmtInitiatedRsts |
1.3.6.1.4.1.562.2.4.1.90.28.1.4 |
This attribute counts the number of reset packets received from the
link with the cause code DTE initiated. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteInPrvdrInitiatedRsts |
1.3.6.1.4.1.562.2.4.1.90.28.1.5 |
This attribute counts the number of reset packets received from the
link with the cause code other than DTE initiated. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteInRestarts |
1.3.6.1.4.1.562.2.4.1.90.28.1.6 |
This attribute counts the number of restart packets received from the
link while the service is in ready state. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteInDataPackets |
1.3.6.1.4.1.562.2.4.1.90.28.1.7 |
This attribute counts the number of data packets received from link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteInPktsAcusdOfPrtclErr |
1.3.6.1.4.1.562.2.4.1.90.28.1.8 |
This attribute counts the number of clear, reset, restart and
diagnostic packets received from link containing a procedure error
cause code. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteInInterruptPackets |
1.3.6.1.4.1.562.2.4.1.90.28.1.9 |
This attributes counts the number of interrupt packets received from
link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteOutCallAttempts |
1.3.6.1.4.1.562.2.4.1.90.28.1.10 |
This attribute counts the number of call packets sent from this
interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteOutCallFailures |
1.3.6.1.4.1.562.2.4.1.90.28.1.11 |
This attribute counts the number of call attempts from this interface
that failed. This includes calls that were cleared because of
restrictive fast select. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteOutInterruptPackets |
1.3.6.1.4.1.562.2.4.1.90.28.1.12 |
This attribute counts the number of interrupt packets sent to the
link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteOutDataPackets |
1.3.6.1.4.1.562.2.4.1.90.28.1.13 |
This attribute counts the number of data packets sent to the link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteOutActiveChannels |
1.3.6.1.4.1.562.2.4.1.90.28.1.14 |
This attribute indicates the number of One-way Outgoing Channels
that are currently in use. This counter includes the call requests that
have not been accepted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteInActiveChannels |
1.3.6.1.4.1.562.2.4.1.90.28.1.15 |
This attribute indicates number of One-way Incoming Channels that
are currently active. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteTwowayActiveChannels |
1.3.6.1.4.1.562.2.4.1.90.28.1.16 |
This attribute indicates the number of Two-way Channels that are in
use. This includes call requests sent but not yet accepted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteT20RestartTimeouts |
1.3.6.1.4.1.562.2.4.1.90.28.1.17 |
This attribute counts the number of times the T20 restart timer has
expired. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteT21CallTimeouts |
1.3.6.1.4.1.562.2.4.1.90.28.1.18 |
This attribute counts the number of times the T21 call timer has
expired. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteT22ResetTimeouts |
1.3.6.1.4.1.562.2.4.1.90.28.1.19 |
This attribute counts the number of times the T22 reset timer has
expired. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteT23ClearTimeouts |
1.3.6.1.4.1.562.2.4.1.90.28.1.20 |
This attribute counts the number of times the T23 clear timer has
expired. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DtePeer |
1.3.6.1.4.1.562.2.4.1.90.2 |
OBJECT IDENTIFIER |
|
|
|
x25DtePeerRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.90.2.1.1 |
A single entry in the table represents a single
x25DtePeer component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DtePeerRowStatusEntry |
|
|
x25DtePeerRowStatus |
1.3.6.1.4.1.562.2.4.1.90.2.1.1.1 |
This variable is used as the basis for SNMP naming of
x25DtePeer components.
These components can be added and deleted. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
x25DtePeerComponentName |
1.3.6.1.4.1.562.2.4.1.90.2.1.1.2 |
This variable provides the component's string name for
use with the ASCII Console Interface |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
x25DtePeerStorageType |
1.3.6.1.4.1.562.2.4.1.90.2.1.1.4 |
This variable represents the storage type value for the
x25DtePeer tables. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
StorageType |
|
|
x25DtePeerIndex |
1.3.6.1.4.1.562.2.4.1.90.2.1.1.10 |
This variable represents the index for the x25DtePeer tables. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..4095 |
|
x25DtePeerIfTable |
1.3.6.1.4.1.562.2.4.1.90.2.10 |
This group provides the administrative set of parameters for the
Peer interface. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DtePeerIfEntry |
|
x25DtePeerIfEntry |
1.3.6.1.4.1.562.2.4.1.90.2.10.1 |
An entry in the x25DtePeerIfTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DtePeerIfEntry |
|
|
x25DtePeerEncAddressType |
1.3.6.1.4.1.562.2.4.1.90.2.10.1.1 |
This attribute specifies the encapsulation type for the address of the
remote host with which this Peer component allows
communication. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ip(204) |
|
x25DtePeerEncAddress |
1.3.6.1.4.1.562.2.4.1.90.2.10.1.2 |
This attribute specifies the encapsulation address of the remote host
with which this Peer component allows communication. This
address must correspond with the encapsulation address type. Thus
in the case of IP, it will contain a IP address. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
AsciiString |
Size(0..128) |
|
x25DtePeerX25Address |
1.3.6.1.4.1.562.2.4.1.90.2.10.1.3 |
This attribute specifies the X.25 address that identifies the remote
host with which this Peer component allows communication. The
remote X.25 interface could be subdivided through the use of
RemoteGroup components; in which case this x25Address is the
X.25 address of the destination's RemoteGroup (not to be confused
with the RemoteGroup indicated by the linkToRemoteGroup
attribute of THIS Peer component). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DigitString |
Size(1..15) |
|
x25DtePeerLinkToRemoteGroup |
1.3.6.1.4.1.562.2.4.1.90.2.10.1.4 |
This is a link to a RemoteGroup component. The RemoteGroup
components logically divide up the X.25 Interface such that a
number of Protocol Ports (and consequently a number of Virtual
Routers) may share the same X.25 Interface into a Wide Area
Network. In particular, the remote host identified by this Peer
component is designated as belonging to the RemoteGroup linked
by this attribute. The set of all Peer components and PermLcn
components which link to a given RemoteGroup determine the
subset of remote hosts which are accessible to a particular Protocol
Port (and ultimately a Virtual Router). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Link |
|
|
x25DtePeerCpTable |
1.3.6.1.4.1.562.2.4.1.90.2.12 |
This group contains the call parameters used to establish a call to/
from the remote host identified by this Peer component |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DtePeerCpEntry |
|
x25DtePeerCpEntry |
1.3.6.1.4.1.562.2.4.1.90.2.12.1 |
An entry in the x25DtePeerCpTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DtePeerCpEntry |
|
|
x25DtePeerInPacketSize |
1.3.6.1.4.1.562.2.4.1.90.2.12.1.1 |
This attribute specifies the default maximum receive packet size in
octets. A setting of 0 indicates the inPacketSize setting for the X.25
interface (in X25Dte component) is used during call setup to the
remote host identified by this Peer component. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0 | 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096 |
|
x25DtePeerOutPacketSize |
1.3.6.1.4.1.562.2.4.1.90.2.12.1.2 |
This attribute specifies the default maximum transmit packet size in
octets. A setting of 0 indicates the outPacketSize setting for the
X.25 interface (in the X25Dte component) is used during call setup
to the remote host identified by this Peer component. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0 | 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096 |
|
x25DtePeerInWindowSize |
1.3.6.1.4.1.562.2.4.1.90.2.12.1.3 |
This attribute specifies the default receive window size. A window
size of 0 indicates the inWindowSize setting for the X.25 interface
(in the X25Dte component) is used during call setup to the remote
host identified by this Peer component. A window size greater than
7 is only valid when the packetSequencing attribute of the X25Dte
component is set to modulo128. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..127 |
|
x25DtePeerOutWindowSize |
1.3.6.1.4.1.562.2.4.1.90.2.12.1.4 |
This attribute specifies the default transmit window size. A window
size of 0 indicates the outWindowSize setting for the X.25 interface
is used during call setup to the Peer identified by this component. A
window size greater than 7 is only valid when the packetSequencing
attribute of the X25Dte component is set to modulo128. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..127 |
|
x25DtePeerAcceptReverseCharging |
1.3.6.1.4.1.562.2.4.1.90.2.12.1.5 |
This attribute specifies whether the local end will accept or refuse
charges for a call from the remote host identified by this Peer
component. A value of default indicates the use of the
acceptReverseCharging value from the X25Dte component. If the
value at the X25Dte level is neverAccept, a value of accept in this
Peer component will be ignored because no reverse charge calls are
to be accepted by this X.25 Dte. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
default(1), accept(2), refuse(3) |
|
x25DtePeerProposeReverseCharging |
1.3.6.1.4.1.562.2.4.1.90.2.12.1.6 |
This attribute specifies whether local/reverse charging is signalled
in a call request packet. A value of default indicates the use of the
value from the proposeReverseCharging attribute of the X25Dte
component. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
default(1), reverse(2), local(3) |
|
x25DtePeerOutThroughputClassSize |
1.3.6.1.4.1.562.2.4.1.90.2.12.1.8 |
This attribute specifies the value of the transmit throughput class to
be negotiated. A value of default indicates the use of the value from
the outThroughputClassSize attribute of the X25Dte component. A
value of notSpecified means the facility is not signalled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17), default(18) |
|
x25DtePeerInThroughputClassSize |
1.3.6.1.4.1.562.2.4.1.90.2.12.1.9 |
This attribute specifies the value of the receive throughput class to
be negotiated. A value of default indicates the use of the value from
the inThroughputClassSize attribute of the X25Dte component. A
value of notSpecified means the facility is not signalled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17), default(18) |
|
x25DtePeerCugIndex |
1.3.6.1.4.1.562.2.4.1.90.2.12.1.10 |
This attribute specifies the index of the Closed User Group facility
to signal. A value of 'DEF' indicates the use of the value from the
cugIndex attribute of the X25Dte component. A value of null
(empty string) indicates no CUG facility is to be signalled. If a
cugIndex is provisioned to be signalled, the cugoaIndex attribute
must be null. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
AsciiString |
Size(0..4) |
|
x25DtePeerCugoaIndex |
1.3.6.1.4.1.562.2.4.1.90.2.12.1.11 |
This attribute specifies the index of the Closed User Group with
Outgoing Access facility to signal. A value of 'DEF' indicates the
use of the value from the cugoaIndex attribute of the X25Dte
component. A value of null (empty string) indicates no CUGOA
facility is to be signalled. If a cugoaIndex is provisioned to be
signalled, the cugIndex attribute must be null. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
AsciiString |
Size(0..4) |
|
x25DtePeerNetworkUserIdentifier |
1.3.6.1.4.1.562.2.4.1.90.2.12.1.12 |
This attribute specifies the Network User Identifier facility to signal.
A value of null (empty string) indicates no NUI facility is to be
signalled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HexString |
Size(0..108) |
|
x25DtePeerRpoa |
1.3.6.1.4.1.562.2.4.1.90.2.12.1.14 |
This attribute specifies the RPOA facility to signal in a call request
packet. A value of 'DEF' indicates the use of the value from the
rpoa attribute of the X25Dte component. A value of null (empty
string) indicates no RPOA facility is to be signalled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
AsciiString |
Size(0..108) |
|
x25DtePeerTrnstDlySlctnAInd |
1.3.6.1.4.1.562.2.4.1.90.2.12.1.15 |
This attribute specifies the value of the Transit Delay Selection and
Indication facility to signal in a call request packet. A value of
65536 indicates no facility is signalled. A value of 65537 indicates
the use of the value from the trnstDlySlctnAInd attribute of the
X25Dte component. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65537 |
|
x25DtePeerCallingNetworkFax |
1.3.6.1.4.1.562.2.4.1.90.2.12.1.24 |
This attribute specifies the Calling Network facilities to signal in a
call request packet. The facilities are encoded here exactly as they
are encoded in the call packet. These facilities do not include the
marker facility code. A value of null (empty string) indicates the
callingNetworkFax from the X25Dte are to be signalled. If that
value is also null, no Calling Network Facilities are signalled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HexString |
Size(0..108) |
|
x25DtePeerCalledNetworkFax |
1.3.6.1.4.1.562.2.4.1.90.2.12.1.25 |
This attribute specifies the Called Network facilities to signal in a
call request packet. The facilities are encoded here exactly as they
are encoded in the call packet. These facilities do not include the
marker facility code. A value of null (empty string) indicates the
calledNetworkFax from the X25Dte are to be signalled. If that value
is also null, no Called Network Facilities are signalled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HexString |
Size(0..108) |
|
x25DtePeerCallUserData |
1.3.6.1.4.1.562.2.4.1.90.2.12.1.26 |
This attribute specifies the user data to signal in a call request
packet. A value of null (empty string) indicates that the
callUserData from the X25Dte is to be signalled. If callUserData of
the X25Dte component is also null and protocolEncType of this
Peer has the value IP, H.CC will be signalled as the call user data of
a call request packet. Thus for IP encapsulation according to
RFC1356, both the callUserData from the Peer and X25Dte
components must be null and the protocolEncType set to IP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HexString |
Size(0..128) |
|
x25DtePeerPEncTable |
1.3.6.1.4.1.562.2.4.1.90.2.208 |
Each instance of this replicated attribute describes an encapsulation
method permitted for encapsulating the protocol data units (PDUs)
of an upper layer protocol when communicating with the remote
host identified by this Peer component. The index of a given
replicated instance of this attribute represents the relative priority of
the encapsulation method specified by the given attribute instance.
An attribute with index '1' has the highest priority, so the
encapsulation method described by it will be the first one attempted
when signalling a call to the link. If the protocolEncType is set to
IP to encapsulate IP traffic according to RFC1356, the
callUserData for this Peer component and the X25Dte component
must both be null, so that H.CC will be signalled as the call user
data of the call request. This indicates that the protocol
encapsulation type of IP is to be used for the channel.
A call received from the link will be accepted as long as the
encapsulation method indicated in the call user data of the incoming
call packet is included in one of these replicated attributes. (This
presupposes that the incoming call has been directed to the
RemoteGroup to which this Peer is linked through the
linkToRemoteGroup attribute.) |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DtePeerPEncEntry |
|
x25DtePeerPEncEntry |
1.3.6.1.4.1.562.2.4.1.90.2.208.1 |
An entry in the x25DtePeerPEncTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DtePeerPEncEntry |
|
|
x25DtePeerPEncIndex |
1.3.6.1.4.1.562.2.4.1.90.2.208.1.1 |
This variable represents the index for the x25DtePeerPEncTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..1 |
|
x25DtePeerPEncValue |
1.3.6.1.4.1.562.2.4.1.90.2.208.1.2 |
This variable represents an individual value for the
x25DtePeerPEncTable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ip(204) |
|
x25DtePeerPEncRowStatus |
1.3.6.1.4.1.562.2.4.1.90.2.208.1.3 |
This variable is used to control the addition and deletion
of individual values of the x25DtePeerPEncTable. |
Status: mandatory |
Access: write-only |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
x25DtePeerLcnTable |
1.3.6.1.4.1.562.2.4.1.90.2.209 |
This attribute specifies the local logical channel numbers (Lcn) in
use for the X.25 calls to the remote host identified by this Peer
component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DtePeerLcnEntry |
|
x25DtePeerLcnEntry |
1.3.6.1.4.1.562.2.4.1.90.2.209.1 |
An entry in the x25DtePeerLcnTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DtePeerLcnEntry |
|
|
x25DtePeerLcnValue |
1.3.6.1.4.1.562.2.4.1.90.2.209.1.1 |
This variable represents both the value and the index for the
x25DtePeerLcnTable. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..4095 |
|
x25DtePLcn |
1.3.6.1.4.1.562.2.4.1.90.3 |
OBJECT IDENTIFIER |
|
|
|
x25DtePLcnRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.90.3.1.1 |
A single entry in the table represents a single
x25DtePLcn component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DtePLcnRowStatusEntry |
|
|
x25DtePLcnRowStatus |
1.3.6.1.4.1.562.2.4.1.90.3.1.1.1 |
This variable is used as the basis for SNMP naming of
x25DtePLcn components.
These components can be added and deleted. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
x25DtePLcnComponentName |
1.3.6.1.4.1.562.2.4.1.90.3.1.1.2 |
This variable provides the component's string name for
use with the ASCII Console Interface |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
x25DtePLcnStorageType |
1.3.6.1.4.1.562.2.4.1.90.3.1.1.4 |
This variable represents the storage type value for the
x25DtePLcn tables. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
StorageType |
|
|
x25DtePLcnIndex |
1.3.6.1.4.1.562.2.4.1.90.3.1.1.10 |
This variable represents the index for the x25DtePLcn tables. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..4095 |
|
x25DtePLcnProvTable |
1.3.6.1.4.1.562.2.4.1.90.3.10 |
This group contains the provisionable parameters for the permanent
logical channels (PLcns) on the X.25 interface (corresponding to
Permanent Virtual Circuits (PVCs) provisioned on the Wide Area
Network). |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DtePLcnProvEntry |
|
x25DtePLcnProvEntry |
1.3.6.1.4.1.562.2.4.1.90.3.10.1 |
An entry in the x25DtePLcnProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DtePLcnProvEntry |
|
|
x25DtePLcnEncAddressType |
1.3.6.1.4.1.562.2.4.1.90.3.10.1.1 |
This attribute specifies the encapsulation type for the address of the
remote host with which this Peer component allows
communication. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(0), ip(204) |
|
x25DtePLcnEncAddress |
1.3.6.1.4.1.562.2.4.1.90.3.10.1.2 |
This attribute specifies the encapsulation address of the remote host
with which this PermLcn component defines a connection |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
AsciiString |
Size(0..128) |
|
x25DtePLcnProtocolEncType |
1.3.6.1.4.1.562.2.4.1.90.3.10.1.3 |
This attribute specifies the encapsulation method to use when
exchanging protocol data units (PDUs) over this channel. IP and
Null protocolEncTypes are as defined in RFC1356.
NscNull is an encapsulation method for carrying IP datagrams
which requires removing 3 padding octets of zeroes and the
protocol identifier H.CC from the front of each data packet received
from the link in order to obtain the PDU. PDUs sent to the link are
propounded by a the protocol identifier H.CC. NscNull should only
be set when the remote host is following this same encapsulation
method. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
null(0), ip(204), nscNull(257) |
|
x25DtePLcnLinkToRemoteGroup |
1.3.6.1.4.1.562.2.4.1.90.3.10.1.4 |
This attribute specifies the link to the RemoteGroup, indicating the
RemoteGroup component with which this PermLcn component is
associated. The RemoteGroup components logically divide up the
X.25 Interface such that a number of Protocol Ports (and
consequently a number of Virtual Routers) may share the same
X.25 Interface into a Wide Area Network. In particular, the remote
host identified by this PermLcn component is designated as
belonging to the RemoteGroup linked by this attribute. The set of all
PermLcn and Peer components which link to a given RemoteGroup
determine the subset of remote hosts which are accessible to a
particular Protocol Port (and ultimately a Virtual Router). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Link |
|
|
x25DtePLcnInPacketSize |
1.3.6.1.4.1.562.2.4.1.90.3.10.1.5 |
This attribute specifies the maximum receive packet size in octets. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096 |
|
x25DtePLcnOutPacketSize |
1.3.6.1.4.1.562.2.4.1.90.3.10.1.6 |
This attribute specifies the maximum transmit packet size in octets. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096 |
|
x25DtePLcnInWindowSize |
1.3.6.1.4.1.562.2.4.1.90.3.10.1.7 |
This attribute specifies the maximum receive window size. A
inWindowSize greater than 7 is only valid when the
packetSequencing attribute of the X25Dte component is set to
modulo128. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..127 |
|
x25DtePLcnOutWindowSize |
1.3.6.1.4.1.562.2.4.1.90.3.10.1.8 |
This attribute specifies the maximum transmit window size. A
outWindowSize greater than 7 is only valid when the
packetSequencing attribute of the X25Dte component is set to
modulo128. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..127 |
|
x25DteLcn |
1.3.6.1.4.1.562.2.4.1.90.4 |
OBJECT IDENTIFIER |
|
|
|
x25DteLcnRowStatusTable |
1.3.6.1.4.1.562.2.4.1.90.4.1 |
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
x25DteLcn components. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteLcnRowStatusEntry |
|
x25DteLcnRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.90.4.1.1 |
A single entry in the table represents a single
x25DteLcn component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLcnRowStatusEntry |
|
|
x25DteLcnRowStatus |
1.3.6.1.4.1.562.2.4.1.90.4.1.1.1 |
This variable is used as the basis for SNMP naming of
x25DteLcn components.
These components cannot be added nor deleted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
x25DteLcnComponentName |
1.3.6.1.4.1.562.2.4.1.90.4.1.1.2 |
This variable provides the component's string name for
use with the ASCII Console Interface |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
x25DteLcnStorageType |
1.3.6.1.4.1.562.2.4.1.90.4.1.1.4 |
This variable represents the storage type value for the
x25DteLcn tables. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
StorageType |
|
|
x25DteLcnIndex |
1.3.6.1.4.1.562.2.4.1.90.4.1.1.10 |
This variable represents the index for the x25DteLcn tables. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..4095 |
|
x25DteLcnStateTable |
1.3.6.1.4.1.562.2.4.1.90.4.10 |
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteLcnStateEntry |
|
x25DteLcnStateEntry |
1.3.6.1.4.1.562.2.4.1.90.4.10.1 |
An entry in the x25DteLcnStateTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLcnStateEntry |
|
|
x25DteLcnAdminState |
1.3.6.1.4.1.562.2.4.1.90.4.10.1.1 |
This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
x25DteLcnOperationalState |
1.3.6.1.4.1.562.2.4.1.90.4.10.1.2 |
This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
x25DteLcnUsageState |
1.3.6.1.4.1.562.2.4.1.90.4.10.1.3 |
This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
idle(0), active(1), busy(2) |
|
x25DteLcnCpTable |
1.3.6.1.4.1.562.2.4.1.90.4.11 |
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the call parameters that are in use for this
logical channel. For a PVC only the packet size and the window
size attributes are meaningful. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteLcnCpEntry |
|
x25DteLcnCpEntry |
1.3.6.1.4.1.562.2.4.1.90.4.11.1 |
An entry in the x25DteLcnCpTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLcnCpEntry |
|
|
x25DteLcnInPacketSize |
1.3.6.1.4.1.562.2.4.1.90.4.11.1.1 |
This attribute indicates the maximum receive packet size in octets. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096 |
|
x25DteLcnOutPacketSize |
1.3.6.1.4.1.562.2.4.1.90.4.11.1.2 |
This attribute indicates the maximum transmit packet size in octets. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096 |
|
x25DteLcnInWindowSize |
1.3.6.1.4.1.562.2.4.1.90.4.11.1.3 |
This attribute indicates the receive window size. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..127 |
|
x25DteLcnOutWindowSize |
1.3.6.1.4.1.562.2.4.1.90.4.11.1.4 |
This attribute indicates the transmit window size. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..127 |
|
x25DteLcnProposeReverseCharging |
1.3.6.1.4.1.562.2.4.1.90.4.11.1.5 |
Specifies whether local/reverse charging was negotiated for this
logical channel. To determine which end of the channel is paying
for the call, this attribute must be examined in combination with the
callDirection attribute. For example, if this attribute is set to reverse
and the callDirection attribute indicates incoming, it means the
incoming call signalled reverse charging, so the local end of the
channel is being charged. On the other, if the value of this attribute
is reverse and the callDirection is outgoing, it means that the call
request sent to the link signalled reverse charging; so the remote end
is charged. Similarly, a value of local must also be interpreted in
combination with the callDirection to determine which end is being
charged. If the value of the callDirection attribute is plcn, the
proposeReverseCharging attribute is meaningless. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
reverse(2), local(3) |
|
x25DteLcnFastSelect |
1.3.6.1.4.1.562.2.4.1.90.4.11.1.6 |
This attribute indicates whether the fast select was used in
establishing this logical channel. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unrestricted(3), restricted(4), no(5) |
|
x25DteLcnOutThroughputClassSize |
1.3.6.1.4.1.562.2.4.1.90.4.11.1.7 |
This attribute specifies the transmit throughput class. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17) |
|
x25DteLcnInThroughputClassSize |
1.3.6.1.4.1.562.2.4.1.90.4.11.1.8 |
This attribute specifies the receive throughput class. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17) |
|
x25DteLcnCugIndex |
1.3.6.1.4.1.562.2.4.1.90.4.11.1.9 |
This attribute indicates the index of the Closed User Group facility
used in establishing this logical channel. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AsciiString |
Size(0..4) |
|
x25DteLcnCugoaIndex |
1.3.6.1.4.1.562.2.4.1.90.4.11.1.10 |
This attribute indicates the index of the Closed User Group with
Outgoing Access facility used in establishing this logical channel. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AsciiString |
Size(0..4) |
|
x25DteLcnNetworkUserIdentifier |
1.3.6.1.4.1.562.2.4.1.90.4.11.1.11 |
Specifies the Network User Identifier used for this logical channel. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HexString |
Size(0..108) |
|
x25DteLcnRpoa |
1.3.6.1.4.1.562.2.4.1.90.4.11.1.13 |
This attribute indicates the RPOA facility which was signalled in
establishing this logical channel. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AsciiString |
Size(0..108) |
|
x25DteLcnTrnstDlySlctnAInd |
1.3.6.1.4.1.562.2.4.1.90.4.11.1.14 |
This attribute indicates the Transit Delay Selection and Indication
value used for this logical channel. A value of 65536 means no
facility was signalled. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65536 |
|
x25DteLcnCallingNetworkFax |
1.3.6.1.4.1.562.2.4.1.90.4.11.1.23 |
This attribute indicates the Calling Network facilities which were
signalled in the call packet. A value of null (empty string) means no
calling network facilities were signalled. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HexString |
Size(0..108) |
|
x25DteLcnCalledNetworkFax |
1.3.6.1.4.1.562.2.4.1.90.4.11.1.24 |
This attribute indicates the called network facilities which were
signalled in the call packet. A value of null (empty string) means no
called network facilities were signalled. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HexString |
Size(0..108) |
|
x25DteLcnCallUserData |
1.3.6.1.4.1.562.2.4.1.90.4.11.1.25 |
This attribute indicates the user data which was signalled in the call
packet. A value of null (empty string) means no user data was
signalled. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HexString |
Size(0..128) |
|
x25DteLcnLcnStatusTable |
1.3.6.1.4.1.562.2.4.1.90.4.12 |
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the status for an X.25 Logical Channel. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteLcnLcnStatusEntry |
|
x25DteLcnLcnStatusEntry |
1.3.6.1.4.1.562.2.4.1.90.4.12.1 |
An entry in the x25DteLcnLcnStatusTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLcnLcnStatusEntry |
|
|
x25DteLcnStatus |
1.3.6.1.4.1.562.2.4.1.90.4.12.1.1 |
This attribute indicates the current state of the logical channel. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
closed(2), calling(3), dataTransfer(4), clearing(5), resetting(7) |
|
x25DteLcnCallDirection |
1.3.6.1.4.1.562.2.4.1.90.4.12.1.3 |
This attribute indicates the direction of the call that caused the
establishment of this channel. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
incoming(1), outgoing(2), permanentLcn(3) |
|
x25DteLcnCalledAddress |
1.3.6.1.4.1.562.2.4.1.90.4.12.1.4 |
This attribute indicates the called X.25 address to which the call is
established. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DigitString |
Size(0..15) |
|
x25DteLcnCallingAddress |
1.3.6.1.4.1.562.2.4.1.90.4.12.1.5 |
This attribute indicates the calling X.25 address from which the call
originated |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DigitString |
Size(0..15) |
|
x25DteLcnOriginalCalledAddress |
1.3.6.1.4.1.562.2.4.1.90.4.12.1.6 |
This attribute indicates the X.25 address of the originally called
DTE to which the call was attempted. This could be different from
the value of the calledAddress attribute in the case where the
original call was redirected. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DigitString |
Size(0..15) |
|
x25DteLcnStatsTable |
1.3.6.1.4.1.562.2.4.1.90.4.13 |
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational statistics for an X.25 Logical
Channel. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteLcnStatsEntry |
|
x25DteLcnStatsEntry |
1.3.6.1.4.1.562.2.4.1.90.4.13.1 |
An entry in the x25DteLcnStatsTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLcnStatsEntry |
|
|
x25DteLcnInUknownProtocols |
1.3.6.1.4.1.562.2.4.1.90.4.13.1.1 |
This attribute counts the number packets received from link which
were discareded because of an unkown or unsupported protocols. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLcnInDataOctets |
1.3.6.1.4.1.562.2.4.1.90.4.13.1.2 |
This attribute counts the number of octets of user data received from
the link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLcnInDataPackets |
1.3.6.1.4.1.562.2.4.1.90.4.13.1.3 |
This attribute counts the number of data packets received from the
link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLcnInRmtInitiatedRsts |
1.3.6.1.4.1.562.2.4.1.90.4.13.1.4 |
This attribute counts the number of reset packets, with a cause code
of 'DTE initiated', which were received from the link |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLcnInPrvdrInitiatedRsts |
1.3.6.1.4.1.562.2.4.1.90.4.13.1.5 |
This attribute counts the number of reset packets, with a cause code
other than 'DTE initiated', which were received from the link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLcnInInterruptPackets |
1.3.6.1.4.1.562.2.4.1.90.4.13.1.6 |
This attribute counts the number of interrupt packets received from
the link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLcnOutDataOctets |
1.3.6.1.4.1.562.2.4.1.90.4.13.1.7 |
This attribute counts the number of octets of user data sent to the
link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLcnOutDataPackets |
1.3.6.1.4.1.562.2.4.1.90.4.13.1.8 |
This attribute counts the number of data packets sent to link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLcnOutInterruptPackets |
1.3.6.1.4.1.562.2.4.1.90.4.13.1.9 |
This attribute counts the number of interrupt packets sent to link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLcnT22ResetTimeouts |
1.3.6.1.4.1.562.2.4.1.90.4.13.1.10 |
This attribute counts the number of times the t22 reset timer has
expired. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLapb |
1.3.6.1.4.1.562.2.4.1.90.5 |
OBJECT IDENTIFIER |
|
|
|
x25DteLapbRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.90.5.1.1 |
A single entry in the table represents a single
x25DteLapb component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLapbRowStatusEntry |
|
|
x25DteLapbRowStatus |
1.3.6.1.4.1.562.2.4.1.90.5.1.1.1 |
This variable is used as the basis for SNMP naming of
x25DteLapb components.
These components cannot be added nor deleted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
x25DteLapbComponentName |
1.3.6.1.4.1.562.2.4.1.90.5.1.1.2 |
This variable provides the component's string name for
use with the ASCII Console Interface |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
x25DteLapbStorageType |
1.3.6.1.4.1.562.2.4.1.90.5.1.1.4 |
This variable represents the storage type value for the
x25DteLapb tables. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
StorageType |
|
|
x25DteLapbIndex |
1.3.6.1.4.1.562.2.4.1.90.5.1.1.10 |
This variable represents the index for the x25DteLapb tables. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NonReplicated |
|
|
x25DteLapbCpTable |
1.3.6.1.4.1.562.2.4.1.90.5.10 |
X25Dte/n Lapb
This group contains the set of configuration parameters for the
LAPB interface. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteLapbCpEntry |
|
x25DteLapbCpEntry |
1.3.6.1.4.1.562.2.4.1.90.5.10.1 |
An entry in the x25DteLapbCpTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLapbCpEntry |
|
|
x25DteLapbStationType |
1.3.6.1.4.1.562.2.4.1.90.5.10.1.1 |
This attribute specifies the DCE or the DTE role of operation for the
LAPB interface. Changing this attribute will cause the lapb link to
Reset. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
dte(1), dce(2) |
|
x25DteLapbFrameSequencing |
1.3.6.1.4.1.562.2.4.1.90.5.10.1.2 |
This attribute specifies the modulo of the frame sequence
numbering of the LAPB interface. Changing this attribute will cause
the lapb link to Reset. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
modulo8(1), modulo128(2) |
|
x25DteLapbN1FrameSize |
1.3.6.1.4.1.562.2.4.1.90.5.10.1.3 |
This attribute specifies the maximum frame size in bits that can be
transmitted or received. This value must be greater than or equal to
the maximum packet size across the interface(in bits)+ max level 3
header size(in bits)+ max level 2 header size(in bits)+ crc in bits.
(max Pkt size + -------------> 4096*8
max level 3 header size + ---> 4*8
level 2 header size + --------> 5*8
crc -------------------> 2*8) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
40..32856 |
|
x25DteLapbKWindowSize |
1.3.6.1.4.1.562.2.4.1.90.5.10.1.4 |
This attribute specifies the window size. This is the maximum
number of unacknowledged sequenced frames that may be
outstanding from or to this interface at any one time. A window size
of greater than 7 is only valid when the sequence numbering of
frames is modulo 128. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..127 |
|
x25DteLapbN2TransmitLimit |
1.3.6.1.4.1.562.2.4.1.90.5.10.1.5 |
This attribute specifies the maximum number of times a frame can
be transmitted before appropriate recovery action is taken. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..20 |
|
x25DteLapbT1AckTimer |
1.3.6.1.4.1.562.2.4.1.90.5.10.1.6 |
This attribute specifies the period in milliseconds within which an
acknowledgment of a sent frame must be received. The value set for
t1 ack timer must be less than the value set for the t4 idle probe
timer. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1000..10000 |
|
x25DteLapbT2AckDelayTimer |
1.3.6.1.4.1.562.2.4.1.90.5.10.1.7 |
This attribute specifies the maximum period in milliseconds
permissible to wait before sending an acknowledgment for a
received in sequenced I-frame. A value of 0 means there will be no
delay in acknowledgment. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..10000 |
|
x25DteLapbT4IdleProbeTimer |
1.3.6.1.4.1.562.2.4.1.90.5.10.1.8 |
This attribute specifies the time period in milliseconds the link will
be permitted to remain idle (that is, no frames are exchanged on the
data link). Upon expiry of this timer, LAPB will poll its peer for
status. The value set for t4 idle probe timer must be greater than the
value set for the t1 ack timer. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1000..65535000 |
|
x25DteLapbActionInitiate |
1.3.6.1.4.1.562.2.4.1.90.5.10.1.9 |
This attribute specifies the action to be taken by the LAPB interface
to initiate link setup. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
sendSABM(1), sendDM(3), none(4) |
|
x25DteLapbActionRecvDM |
1.3.6.1.4.1.562.2.4.1.90.5.10.1.10 |
This attribute specifies the action to be taken by the LAPB interface
when it receives a DM response. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
sendSABM(1) |
|
x25DteLapbTxQDegradeThreshold |
1.3.6.1.4.1.562.2.4.1.90.5.10.1.11 |
This attribute specifies the threshold of the number of higher layer
packets queued, beyond which LAPB should initiate a service
degrade alarm. A value of 65536 means no threshold. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..65536 |
|
x25DteLapbTxQResetThreshold |
1.3.6.1.4.1.562.2.4.1.90.5.10.1.12 |
This attribute specifies the threshold of the number of higher layer
packets queued, beyond which LAPB should initiate an overload
alarm and reset the link. A value of 65536 means no threshold. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..65536 |
|
x25DteLapbStateTable |
1.3.6.1.4.1.562.2.4.1.90.5.11 |
This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteLapbStateEntry |
|
x25DteLapbStateEntry |
1.3.6.1.4.1.562.2.4.1.90.5.11.1 |
An entry in the x25DteLapbStateTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLapbStateEntry |
|
|
x25DteLapbAdminState |
1.3.6.1.4.1.562.2.4.1.90.5.11.1.1 |
This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
x25DteLapbOperationalState |
1.3.6.1.4.1.562.2.4.1.90.5.11.1.2 |
This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
x25DteLapbUsageState |
1.3.6.1.4.1.562.2.4.1.90.5.11.1.3 |
This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
idle(0), active(1), busy(2) |
|
x25DteLapbStatusEntry |
1.3.6.1.4.1.562.2.4.1.90.5.12.1 |
An entry in the x25DteLapbStatusTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLapbStatusEntry |
|
|
x25DteLapbCurrentState |
1.3.6.1.4.1.562.2.4.1.90.5.12.1.1 |
This attribute specifies the current state of the LAPB interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disconnected(1), linkSetup(2), frameReject(3), disconnectRequest(4), informationTransfer(5), waitingAck(7) |
|
x25DteLapbLastStateChangeReason |
1.3.6.1.4.1.562.2.4.1.90.5.12.1.2 |
This attribute specifies the reason for the most recent state change. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notStarted(1), abmEntered(2), abmeEntered(3), abmReset(4), abmeReset(5), dmReceived(6), dmSent(7), discReceived(8), discSent(9), frmrReceived(10), frmrSent(11), n2TimeOut(12), other(13) |
|
x25DteLapbFrmrTransmit |
1.3.6.1.4.1.562.2.4.1.90.5.12.1.3 |
This attribute specifies the Information field of the FRMR most
recently sent. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HexString |
Size(0..7) |
|
x25DteLapbFrmrReceive |
1.3.6.1.4.1.562.2.4.1.90.5.12.1.4 |
This attribute specifies the Information field of the FRMR most
recently received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HexString |
Size(0..7) |
|
x25DteLapbCurrentQueueSize |
1.3.6.1.4.1.562.2.4.1.90.5.12.1.5 |
This attribute specifies the number of packets on the lapb transmit
queue. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..4294967295 |
|
x25DteLapbStatsEntry |
1.3.6.1.4.1.562.2.4.1.90.5.13.1 |
An entry in the x25DteLapbStatsTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLapbStatsEntry |
|
|
x25DteLapbStateChanges |
1.3.6.1.4.1.562.2.4.1.90.5.13.1.1 |
This attribute counts the number of times LAPB state has changed.
Refer to the attribute 'linkState' for the set of possible states. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLapbRemoteBusy |
1.3.6.1.4.1.562.2.4.1.90.5.13.1.2 |
This attribute counts the number of times transmission of an I-frame
was un-successful due to a perceived remote busy condition
(window closed or remote busy). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLapbReceiveRejectFrames |
1.3.6.1.4.1.562.2.4.1.90.5.13.1.4 |
This attribute counts the number of REJ frames received by the
interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLapbT1AckTimeout |
1.3.6.1.4.1.562.2.4.1.90.5.13.1.5 |
This attribute counts the number of times the T1 timer has expired. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLapbFramerRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.90.5.2.1.1 |
A single entry in the table represents a single
x25DteLapbFramer component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLapbFramerRowStatusEntry |
|
|
x25DteLapbFramerRowStatus |
1.3.6.1.4.1.562.2.4.1.90.5.2.1.1.1 |
This variable is used as the basis for SNMP naming of
x25DteLapbFramer components.
These components cannot be added nor deleted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
x25DteLapbFramerComponentName |
1.3.6.1.4.1.562.2.4.1.90.5.2.1.1.2 |
This variable provides the component's string name for
use with the ASCII Console Interface |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
x25DteLapbFramerStorageType |
1.3.6.1.4.1.562.2.4.1.90.5.2.1.1.4 |
This variable represents the storage type value for the
x25DteLapbFramer tables. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
StorageType |
|
|
x25DteLapbFramerIndex |
1.3.6.1.4.1.562.2.4.1.90.5.2.1.1.10 |
This variable represents the index for the x25DteLapbFramer tables. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NonReplicated |
|
|
x25DteLapbFramerProvTable |
1.3.6.1.4.1.562.2.4.1.90.5.2.10 |
This group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning
data is contained in other provisionable Framer groups. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteLapbFramerProvEntry |
|
x25DteLapbFramerProvEntry |
1.3.6.1.4.1.562.2.4.1.90.5.2.10.1 |
An entry in the x25DteLapbFramerProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLapbFramerProvEntry |
|
|
x25DteLapbFramerInterfaceName |
1.3.6.1.4.1.562.2.4.1.90.5.2.10.1.1 |
This attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Link |
|
|
x25DteLapbFramerLinkEntry |
1.3.6.1.4.1.562.2.4.1.90.5.2.11.1 |
An entry in the x25DteLapbFramerLinkTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLapbFramerLinkEntry |
|
|
x25DteLapbFramerFlagsBetweenFrames |
1.3.6.1.4.1.562.2.4.1.90.5.2.11.1.4 |
This attribute defines the number of flags that are inserted between
frames sent to the link interface. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..16 |
|
x25DteLapbFramerStateTable |
1.3.6.1.4.1.562.2.4.1.90.5.2.12 |
This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteLapbFramerStateEntry |
|
x25DteLapbFramerStateEntry |
1.3.6.1.4.1.562.2.4.1.90.5.2.12.1 |
An entry in the x25DteLapbFramerStateTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLapbFramerStateEntry |
|
|
x25DteLapbFramerAdminState |
1.3.6.1.4.1.562.2.4.1.90.5.2.12.1.1 |
This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
x25DteLapbFramerOperationalState |
1.3.6.1.4.1.562.2.4.1.90.5.2.12.1.2 |
This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
x25DteLapbFramerUsageState |
1.3.6.1.4.1.562.2.4.1.90.5.2.12.1.3 |
This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
idle(0), active(1), busy(2) |
|
x25DteLapbFramerStatsEntry |
1.3.6.1.4.1.562.2.4.1.90.5.2.13.1 |
An entry in the x25DteLapbFramerStatsTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLapbFramerStatsEntry |
|
|
x25DteLapbFramerFrmToIf |
1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.1 |
The number of frames transmitted to the link interface by Framer.
Note: This does not include the number of frames transmitted
directly to the hardware queue, thus bypassing the Framer
component. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLapbFramerFrmFromIf |
1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.2 |
The number of frames received from the link interface by Framer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLapbFramerOctetFromIf |
1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.3 |
The number of bytes received from the link interface by Framer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLapbFramerAborts |
1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.4 |
This attribute is the total number of aborts received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLapbFramerCrcErrors |
1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.5 |
This attribute is the total number of frames with CRC errors,
occurring in the receive direction from the link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLapbFramerLrcErrors |
1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.6 |
This attribute is the total number of frames with LRC errors,
occurring in the Tx link prior to transmission onto the link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLapbFramerNonOctetErrors |
1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.7 |
This attribute is the total number of frames that were non octet
aligned. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLapbFramerOverruns |
1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.8 |
This attribute is the total number of frames received from the link
for which overruns occurred. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLapbFramerUnderruns |
1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.9 |
This attribute is the total number of frames transmitted to the link
for which underruns occurred. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
x25DteLapbFramerUtilEntry |
1.3.6.1.4.1.562.2.4.1.90.5.2.14.1 |
An entry in the x25DteLapbFramerUtilTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteLapbFramerUtilEntry |
|
|
x25DteLapbFramerNormPrioLinkUtilToIf |
1.3.6.1.4.1.562.2.4.1.90.5.2.14.1.1 |
This attribute is the utilization of the normal and high priority data
traffic (interruptable traffic) sent to the link as a percentage of the
available bandwidth on the link. Note that this includes traffic with
Transfer Priorities of 0, 6 and 9 and/or Emission Priority of 2 and 3.
The utilization is the average for the last minute. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
0..100 |
|
x25DteLapbFramerNormPrioLinkUtilFromIf |
1.3.6.1.4.1.562.2.4.1.90.5.2.14.1.3 |
This attribute is the utilization of the normal and high priority data
traffic (interruptable traffic) received from the link as a percentage
of the available bandwidth on the link. Note that this includes traffic
with Transfer Priorities (TP) of 0, 6 or 9 and/or Emission Priority of
2 and 3. The utilization is the average for the last minute. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
0..100 |
|
x25DtePle |
1.3.6.1.4.1.562.2.4.1.90.6 |
OBJECT IDENTIFIER |
|
|
|
x25DtePleRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.90.6.1.1 |
A single entry in the table represents a single
x25DtePle component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DtePleRowStatusEntry |
|
|
x25DtePleRowStatus |
1.3.6.1.4.1.562.2.4.1.90.6.1.1.1 |
This variable is used as the basis for SNMP naming of
x25DtePle components.
These components cannot be added nor deleted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
x25DtePleComponentName |
1.3.6.1.4.1.562.2.4.1.90.6.1.1.2 |
This variable provides the component's string name for
use with the ASCII Console Interface |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
x25DtePleStorageType |
1.3.6.1.4.1.562.2.4.1.90.6.1.1.4 |
This variable represents the storage type value for the
x25DtePle tables. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
StorageType |
|
|
x25DtePleIndex |
1.3.6.1.4.1.562.2.4.1.90.6.1.1.10 |
This variable represents the index for the x25DtePle tables. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NonReplicated |
|
|
x25DtePleProvTable |
1.3.6.1.4.1.562.2.4.1.90.6.10 |
This group contains the provisionable attributes relevant to an
interface used to carry Multiprotocol Interconnect traffic over X.25. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DtePleProvEntry |
|
x25DtePleProvEntry |
1.3.6.1.4.1.562.2.4.1.90.6.10.1 |
An entry in the x25DtePleProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DtePleProvEntry |
|
|
x25DtePleInactivityTimer |
1.3.6.1.4.1.562.2.4.1.90.6.10.1.1 |
This attribute specifies the period in milliseconds this interface will
keep an idle connection open before closing it. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65536000 |
|
x25DtePleOpTable |
1.3.6.1.4.1.562.2.4.1.90.6.11 |
This group contains the Operational attributes relevant to an
interface used to carry Multiprotocol Interconnect traffic over X.25. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DtePleOpEntry |
|
x25DtePleOpEntry |
1.3.6.1.4.1.562.2.4.1.90.6.11.1 |
An entry in the x25DtePleOpTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DtePleOpEntry |
|
|
x25DtePleEncAddrToX25LkupFlrs |
1.3.6.1.4.1.562.2.4.1.90.6.11.1.1 |
This attribute indicates the number of times a translation attempt
from an Encapsulation address to an X.25 address failed to find a
corresponding X.25 address. Such a failure could occur when a
Protocol Port, linked to a RemoteGroup via the linkToProtocolPort
attribute of the RemoteGroup, requests through the software that a
X.25 call be established to a particular Encapsulation address. If the
RemoteGroup does not have a Peer component linked in its
linkToPeer attribute list, with the encAddress attribute equal to the
Encapsulation address specified, this counter will be incremented,
because the corresponding Peer component needed to establish an
X.25 connection was not found. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..4294967295 |
|
x25DtePleLastFailedEncAddr |
1.3.6.1.4.1.562.2.4.1.90.6.11.1.2 |
This attribute indicates the last Encapsulation address for which no
corresponding X.25 address was found and thus caused
encAddressToX25LkupFlrs to be incremented. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HexString |
Size(2..128) |
|
x25DtePleX25AddrToEncLkupFlrs |
1.3.6.1.4.1.562.2.4.1.90.6.11.1.4 |
This attribute indicates the number of times a translation attempt
from an X.25 address to an Encapsulation address failed to find a
corresponding Encapsulation address. Such a failure could occur
when a incoming call received from the link by the X.25 DTE is
directed to a specific RemoteGroup because the called address
matches the localAddress attribute of the RemoteGroup component.
If the RemoteGroup component does not have a Peer component
linked in its linkToPeer attribute list, with the x25Address attribute
equal to the calling address from the incoming call packet, there is
no appropriate Peer component, so the call is cleared and this
counter is incremented. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..4294967295 |
|
x25DtePleLastFailedX25Addr |
1.3.6.1.4.1.562.2.4.1.90.6.11.1.5 |
This field specifies the last X.25 address that caused
x25AddressToEncLkupFlrs to be incremented. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DigitString |
Size(0..15) |
|
x25DteRg |
1.3.6.1.4.1.562.2.4.1.90.7 |
OBJECT IDENTIFIER |
|
|
|
x25DteRgRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.90.7.1.1 |
A single entry in the table represents a single
x25DteRg component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteRgRowStatusEntry |
|
|
x25DteRgRowStatus |
1.3.6.1.4.1.562.2.4.1.90.7.1.1.1 |
This variable is used as the basis for SNMP naming of
x25DteRg components.
These components can be added and deleted. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
x25DteRgComponentName |
1.3.6.1.4.1.562.2.4.1.90.7.1.1.2 |
This variable provides the component's string name for
use with the ASCII Console Interface |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
x25DteRgStorageType |
1.3.6.1.4.1.562.2.4.1.90.7.1.1.4 |
This variable represents the storage type value for the
x25DteRg tables. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
StorageType |
|
|
x25DteRgIndex |
1.3.6.1.4.1.562.2.4.1.90.7.1.1.10 |
This variable represents the index for the x25DteRg tables. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..1023 |
|
x25DteRgIfEntryTable |
1.3.6.1.4.1.562.2.4.1.90.7.10 |
This group contains the provisionable attributes for the ifEntry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteRgIfEntryEntry |
|
x25DteRgIfEntryEntry |
1.3.6.1.4.1.562.2.4.1.90.7.10.1 |
An entry in the x25DteRgIfEntryTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteRgIfEntryEntry |
|
|
x25DteRgIfAdminStatus |
1.3.6.1.4.1.562.2.4.1.90.7.10.1.1 |
The desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
up(1), down(2), testing(3) |
|
x25DteRgIfIndex |
1.3.6.1.4.1.562.2.4.1.90.7.10.1.2 |
This is the index for the IfEntry. Its value is automatically initialized
during the provisioning process. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
InterfaceIndex |
1..65535 |
|
x25DteRgProvTable |
1.3.6.1.4.1.562.2.4.1.90.7.11 |
This group contains the provisionable attributes of the
RemoteGroup component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteRgProvEntry |
|
x25DteRgProvEntry |
1.3.6.1.4.1.562.2.4.1.90.7.11.1 |
An entry in the x25DteRgProvTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteRgProvEntry |
|
|
x25DteRgLinkToProtocolPort |
1.3.6.1.4.1.562.2.4.1.90.7.11.1.1 |
This attribute contains a protocol port component name. The
attribute associates the application with a protocol port. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Link |
|
|
x25DteRgLocalAddress |
1.3.6.1.4.1.562.2.4.1.90.7.11.1.2 |
This attribute contains the unique X.25 address which identifies this
RemoteGroup. It should correspond to the called address in X.25
incoming call packets which are to be directed to this
RemoteGroup. This allows calls received from the link to be
directed to the appropriate RemoteGroup based on the called
address in the X.25 call packet. The RemoteGroup components
allow the X.25 interface to be shared amongst a number of Protocol
Ports (and ultimately Virtual Routers) because each RemoteGroup
is coupled with a specific ProtocolPort through its
linkToProtocolPort attribute. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DigitString |
Size(1..15) |
|
x25DteRgMtuSize |
1.3.6.1.4.1.562.2.4.1.90.7.11.1.3 |
This attribute specifies the Maximum Transmit Unit (MTU); that is,
the size of the largest datagram (in octets) which can be sent/
received on the interface. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
576..9188 |
|
x25DteRgStateTable |
1.3.6.1.4.1.562.2.4.1.90.7.12 |
This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteRgStateEntry |
|
x25DteRgStateEntry |
1.3.6.1.4.1.562.2.4.1.90.7.12.1 |
An entry in the x25DteRgStateTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteRgStateEntry |
|
|
x25DteRgAdminState |
1.3.6.1.4.1.562.2.4.1.90.7.12.1.1 |
This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
x25DteRgOperationalState |
1.3.6.1.4.1.562.2.4.1.90.7.12.1.2 |
This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
x25DteRgUsageState |
1.3.6.1.4.1.562.2.4.1.90.7.12.1.3 |
This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
idle(0), active(1), busy(2) |
|
x25DteRgOperStatusTable |
1.3.6.1.4.1.562.2.4.1.90.7.13 |
This group includes the Operational Status attribute. This attribute
defines the current operational state of this component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteRgOperStatusEntry |
|
x25DteRgOperStatusEntry |
1.3.6.1.4.1.562.2.4.1.90.7.13.1 |
An entry in the x25DteRgOperStatusTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteRgOperStatusEntry |
|
|
x25DteRgSnmpOperStatus |
1.3.6.1.4.1.562.2.4.1.90.7.13.1.1 |
The current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
up(1), down(2), testing(3) |
|
x25DteRgLTPlcnTable |
1.3.6.1.4.1.562.2.4.1.90.7.210 |
This attribute is a list of links to PermLcn components. The set of
all Peer and PermLcn components which link to a given
RemoteGroup determine the subset of remote hosts which are
accessible to a particular Protocol Port (and ultimately a Virtual
Router). |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteRgLTPlcnEntry |
|
x25DteRgLTPlcnEntry |
1.3.6.1.4.1.562.2.4.1.90.7.210.1 |
An entry in the x25DteRgLTPlcnTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteRgLTPlcnEntry |
|
|
x25DteRgLTPlcnValue |
1.3.6.1.4.1.562.2.4.1.90.7.210.1.1 |
This variable represents both the value and the index for the
x25DteRgLTPlcnTable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Link |
|
|
x25DteRgLTPlcnRowStatus |
1.3.6.1.4.1.562.2.4.1.90.7.210.1.2 |
This variable is used to control the addition and deletion
of individual values of the x25DteRgLTPlcnTable. |
Status: mandatory |
Access: write-only |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
x25DteRgLtPeerTable |
1.3.6.1.4.1.562.2.4.1.90.7.211 |
This attribute gives a list of links to Peer components. The set of all
Peer and PermLcn components which link to a given RemoteGroup
determine the subset of remote hosts which are accessible to a
particular Protocol Port (and ultimately a Virtual Router). |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteRgLtPeerEntry |
|
x25DteRgLtPeerEntry |
1.3.6.1.4.1.562.2.4.1.90.7.211.1 |
An entry in the x25DteRgLtPeerTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteRgLtPeerEntry |
|
|
x25DteRgLtPeerValue |
1.3.6.1.4.1.562.2.4.1.90.7.211.1.1 |
This variable represents both the value and the index for the
x25DteRgLtPeerTable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Link |
|
|
x25DteRgLtPeerRowStatus |
1.3.6.1.4.1.562.2.4.1.90.7.211.1.2 |
This variable is used to control the addition and deletion
of individual values of the x25DteRgLtPeerTable. |
Status: mandatory |
Access: write-only |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
x25DteRgLcnTable |
1.3.6.1.4.1.562.2.4.1.90.7.212 |
This attribute lists the Lcn components for the X25Dte, which
belong to this RemoteGroup. There is an Lcn component listed here
for every lcn connection belonging to this RemoteGroup. The lcns
were established using either a Peer component linked to this
RemoteGroup (in response to a switched call) or using a PermLcn
component linked to this RemoteGroup (a permanent connection). |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
X25DteRgLcnEntry |
|
x25DteRgLcnEntry |
1.3.6.1.4.1.562.2.4.1.90.7.212.1 |
An entry in the x25DteRgLcnTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
X25DteRgLcnEntry |
|
|
x25DteRgLcnValue |
1.3.6.1.4.1.562.2.4.1.90.7.212.1.1 |
This variable represents both the value and the index for the
x25DteRgLcnTable. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..4095 |
|
x25DteGroup |
1.3.6.1.4.1.562.2.4.2.48.1 |
OBJECT IDENTIFIER |
|
|
|