Nortel-Magellan-Passport-TrunksMIB

File: Nortel-Magellan-Passport-TrunksMIB.mib (87542 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE components passportMIBs
Counter32 DisplayString StorageType
RowStatus PassportCounter64 InterfaceIndex
Gauge32 Integer32 Unsigned32
AsciiString NonReplicated FixedPoint1

Defined Types

TrkRowStatusEntry  
SEQUENCE    
  trkRowStatus RowStatus
  trkComponentName DisplayString
  trkStorageType StorageType
  trkIndex Integer32

TrkIfEntryEntry  
SEQUENCE    
  trkIfAdminStatus INTEGER
  trkIfIndex InterfaceIndex

TrkProvEntry  
SEQUENCE    
  trkExpectedRemoteNodeName AsciiString
  trkRemoteValidationAction INTEGER
  trkMaximumExpectedRoundTripDelay Unsigned32
  trkIdleTimeOut Unsigned32

TrkOverridesEntry  
SEQUENCE    
  trkOverrideTransmitSpeed Gauge32
  trkOldOverrideRoundTripDelay Gauge32
  trkOverrideRoundTripUsec FixedPoint1

TrkStateEntry  
SEQUENCE    
  trkAdminState INTEGER
  trkOperationalState INTEGER
  trkUsageState INTEGER
  trkAvailabilityStatus OCTET STRING
  trkProceduralStatus OCTET STRING
  trkControlStatus OCTET STRING
  trkAlarmStatus OCTET STRING
  trkStandbyStatus INTEGER
  trkUnknownStatus INTEGER

TrkOperStatusEntry  
SEQUENCE    
  trkSnmpOperStatus INTEGER

TrkOperEntry  
SEQUENCE    
  trkRemoteComponentName AsciiString

TrkTransportEntry  
SEQUENCE    
  trkMeasuredSpeedToIf Gauge32
  trkMeasuredRoundTripDelay Gauge32
  trkMaxTxUnit Gauge32
  trkMeasuredRoundTripDelayUsec FixedPoint1

TrkStatsEntry  
SEQUENCE    
  trkAreYouThereModeEntries Counter32
  trkPktFromIf PassportCounter64
  trkTrunkPktFromIf Counter32
  trkTrunkPktToIf Counter32
  trkDiscardUnforward PassportCounter64
  trkDiscardTrunkPktFromIf Counter32
  trkIntPktFromIf PassportCounter64
  trkDiscardIntUnforward PassportCounter64
  trkStagingAttempts Counter32
  trkDiscardTrunkPktToIf Counter32
  trkUtilization Gauge32

TrkSpeedReportingEntry  
SEQUENCE    
  trkSpeedReportingHoldOff Unsigned32
  trkLowSpeedAlarmThreshold Unsigned32
  trkHighSpeedAlarmThreshold Unsigned32

TrkSpdThEntry  
SEQUENCE    
  trkSpdThValue Integer32
  trkSpdThRowStatus RowStatus

TrkPktBpEntry  
SEQUENCE    
  trkPktBpIndex INTEGER
  trkPktBpValue PassportCounter64

TrkDiscBpEntry  
SEQUENCE    
  trkDiscBpIndex INTEGER
  trkDiscBpValue PassportCounter64

TrkOctBpEntry  
SEQUENCE    
  trkOctBpIndex INTEGER
  trkOctBpValue PassportCounter64

TrkPorsStatsRowStatusEntry  
SEQUENCE    
  trkPorsStatsRowStatus RowStatus
  trkPorsStatsComponentName DisplayString
  trkPorsStatsStorageType StorageType
  trkPorsStatsIndex NonReplicated

TrkPorsStatsOperEntry  
SEQUENCE    
  trkPorsStatsPorsNormPktFromIf PassportCounter64
  trkPorsStatsPorsNormDiscUnforwardFromIf PassportCounter64
  trkPorsStatsPorsNormOctetFromIf PassportCounter64
  trkPorsStatsPorsIntPktFromIf PassportCounter64
  trkPorsStatsPorsIntDiscUnforwardFromIf PassportCounter64
  trkPorsStatsPorsIntOctetFromIf PassportCounter64

TrkPorsStatsPktBpEntry  
SEQUENCE    
  trkPorsStatsPktBpEpIndex INTEGER
  trkPorsStatsPktBpDpIndex INTEGER
  trkPorsStatsPktBpValue PassportCounter64

TrkPorsStatsDiscBpEntry  
SEQUENCE    
  trkPorsStatsDiscBpEpIndex INTEGER
  trkPorsStatsDiscBpDpIndex INTEGER
  trkPorsStatsDiscBpValue PassportCounter64

TrkPorsStatsOctBpEntry  
SEQUENCE    
  trkPorsStatsOctBpEpIndex INTEGER
  trkPorsStatsOctBpDpIndex INTEGER
  trkPorsStatsOctBpValue PassportCounter64

TrkFwdStatsRowStatusEntry  
SEQUENCE    
  trkFwdStatsRowStatus RowStatus
  trkFwdStatsComponentName DisplayString
  trkFwdStatsStorageType StorageType
  trkFwdStatsIndex NonReplicated

TrkFwdStatsOperEntry  
SEQUENCE    
  trkFwdStatsFwdPktFromIf PassportCounter64
  trkFwdStatsFwdDiscUnforwardFromIf PassportCounter64
  trkFwdStatsFwdOctetFromIf PassportCounter64

TrkVnsStatsRowStatusEntry  
SEQUENCE    
  trkVnsStatsRowStatus RowStatus
  trkVnsStatsComponentName DisplayString
  trkVnsStatsStorageType StorageType
  trkVnsStatsIndex NonReplicated

TrkVnsStatsOperEntry  
SEQUENCE    
  trkVnsStatsVnsPktFromIf PassportCounter64
  trkVnsStatsVnsDiscUnforwardFromIf PassportCounter64
  trkVnsStatsVnsOctetFromIf PassportCounter64

TrkVnsStatsPktBpEntry  
SEQUENCE    
  trkVnsStatsPktBpEpIndex INTEGER
  trkVnsStatsPktBpDpIndex INTEGER
  trkVnsStatsPktBpValue PassportCounter64

TrkVnsStatsDiscBpEntry  
SEQUENCE    
  trkVnsStatsDiscBpEpIndex INTEGER
  trkVnsStatsDiscBpDpIndex INTEGER
  trkVnsStatsDiscBpValue PassportCounter64

TrkVnsStatsOctBpEntry  
SEQUENCE    
  trkVnsStatsOctBpEpIndex INTEGER
  trkVnsStatsOctBpDpIndex INTEGER
  trkVnsStatsOctBpValue PassportCounter64

TrkDprsStatsRowStatusEntry  
SEQUENCE    
  trkDprsStatsRowStatus RowStatus
  trkDprsStatsComponentName DisplayString
  trkDprsStatsStorageType StorageType
  trkDprsStatsIndex NonReplicated

TrkDprsStatsPktBpEntry  
SEQUENCE    
  trkDprsStatsPktBpEpIndex INTEGER
  trkDprsStatsPktBpDpIndex INTEGER
  trkDprsStatsPktBpValue PassportCounter64

TrkDprsStatsDiscBpEntry  
SEQUENCE    
  trkDprsStatsDiscBpEpIndex INTEGER
  trkDprsStatsDiscBpDpIndex INTEGER
  trkDprsStatsDiscBpValue PassportCounter64

TrkDprsStatsOctBpEntry  
SEQUENCE    
  trkDprsStatsOctBpEpIndex INTEGER
  trkDprsStatsOctBpDpIndex INTEGER
  trkDprsStatsOctBpValue PassportCounter64

Defined Values

trunksMIB 1.3.6.1.4.1.562.2.4.2.43
OBJECT IDENTIFIER    

trk 1.3.6.1.4.1.562.2.4.1.60
OBJECT IDENTIFIER    

trkRowStatusTable 1.3.6.1.4.1.562.2.4.1.60.1
This entry controls the addition and deletion of trk components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkRowStatusEntry

trkRowStatusEntry 1.3.6.1.4.1.562.2.4.1.60.1.1
A single entry in the table represents a single trk component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkRowStatusEntry  

trkRowStatus 1.3.6.1.4.1.562.2.4.1.60.1.1.1
This variable is used as the basis for SNMP naming of trk components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

trkComponentName 1.3.6.1.4.1.562.2.4.1.60.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

trkStorageType 1.3.6.1.4.1.562.2.4.1.60.1.1.4
This variable represents the storage type value for the trk tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

trkIndex 1.3.6.1.4.1.562.2.4.1.60.1.1.10
This variable represents the index for the trk tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

trkIfEntryTable 1.3.6.1.4.1.562.2.4.1.60.100
This group contains the provisionable attributes for the ifEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkIfEntryEntry

trkIfEntryEntry 1.3.6.1.4.1.562.2.4.1.60.100.1
An entry in the trkIfEntryTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkIfEntryEntry  

trkIfAdminStatus 1.3.6.1.4.1.562.2.4.1.60.100.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

trkIfIndex 1.3.6.1.4.1.562.2.4.1.60.100.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex 1..65535  

trkProvTable 1.3.6.1.4.1.562.2.4.1.60.101
This group of attributes provides the parameters used by the layer 3 Trunk to Trunk staging protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkProvEntry

trkProvEntry 1.3.6.1.4.1.562.2.4.1.60.101.1
An entry in the trkProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkProvEntry  

trkExpectedRemoteNodeName 1.3.6.1.4.1.562.2.4.1.60.101.1.1
This attribute specifies the expected node name of the module to which this Trunk is connected. Once entered, the node name must correspond to the Mod nodeName attribute of the remote node. The Trunk end points exchange their node name through the Trunk staging protocol. The staged value is validated and the remoteValidationAction will be executed for those values not matching the value supplied for this attribute. If this attribute is an empty string, then the comparison is always successful.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..12)  

trkRemoteValidationAction 1.3.6.1.4.1.562.2.4.1.60.101.1.2
This attribute specifies the action to be taken if there is a mismatch between the expectedRemoteNodeName attribute and the value received from the remote end. The remoteValidationAction determines the action when a value is supplied to the expectedRemoteNodeName attribute. If this attribute is provisioned to continue then upon an unsuccessful validation staging continues, otherwise, if disable is set then the Trunk does not continue to stage but, attempts to stage again after a one minute time out. All unsuccessful validation when the expectedRemoteNodeName has been set result in the generation of an alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER continue(0), disable(1)  

trkMaximumExpectedRoundTripDelay 1.3.6.1.4.1.562.2.4.1.60.101.1.3
This is the maximum round trip delay value used by the Trunk staging protocol, in conjunction with measuredSpeedToIf, to determine if it has taken too long to successfully stage with a remote Trunk. The value specified must be larger than the measuredRoundTripDelay or the Trunk may not successfully stage.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1500  

trkIdleTimeOut 1.3.6.1.4.1.562.2.4.1.60.101.1.4
This attribute specifies the Trunk protocol idle time out duration in units of seconds. If the local Trunk does not receive any packets from the link for the period specified by this attribute, the Trunk enters Are You There (AYT) mode for up to two seconds. If the Trunk does not receive any packets from the remote during the AYT mode it will restage; otherwise, it exits AYT mode and continues to provide service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 2..30  

trkOverridesTable 1.3.6.1.4.1.562.2.4.1.60.102
Theses attribute comprise the set of provisionable override parameters supported by both the Trunk and DpnGateway components. The attributes are used when reporting operational attributes (used for metric calculations) to the routing system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkOverridesEntry

trkOverridesEntry 1.3.6.1.4.1.562.2.4.1.60.102.1
An entry in the trkOverridesTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkOverridesEntry  

trkOverrideTransmitSpeed 1.3.6.1.4.1.562.2.4.1.60.102.1.1
This is the overridden value of link speed (bit/s) that, if staged successfully with the remote, is reported to the routing system for metric calculations. A zero indicates that an override value has not been provided and that only the measured value will be reported to the routing system. If this value is changed on a Trunk or DpnGateway that is enabled, the LOCK and UNLOCK commands must be issued to the component to restage the override with the remote.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge32 0 | 1000..4294967295  

trkOldOverrideRoundTripDelay 1.3.6.1.4.1.562.2.4.1.60.102.1.2
This is the overridden value of link delay (ms) that, if staged successfully with the remote, is reported to the routing system for metric calculations. A zero indicates that an override value has not been provided and that only the measured value will be reported to the routing system. If this value is changed on a Trunk or DpnGateway that is enabled, the LOCK and UNLOCK commands must be issued to the component to restage the override with the remote.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Gauge32 0..1500  

trkOverrideRoundTripUsec 1.3.6.1.4.1.562.2.4.1.60.102.1.3
This is the overridden value of link delay (ms) that, if staged successfully with the remote, is reported to the routing system for metric calculations. A zero indicates that an override value has not been provided and that only the measured value will be reported to the routing system. If this value is changed on a Trunk or DpnGateway that is enabled, the LOCK and UNLOCK commands must be issued to the component to restage the override with the remote.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FixedPoint1 0..15000  

trkStateTable 1.3.6.1.4.1.562.2.4.1.60.103
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkStateEntry

trkStateEntry 1.3.6.1.4.1.562.2.4.1.60.103.1
An entry in the trkStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkStateEntry  

trkAdminState 1.3.6.1.4.1.562.2.4.1.60.103.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

trkOperationalState 1.3.6.1.4.1.562.2.4.1.60.103.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

trkUsageState 1.3.6.1.4.1.562.2.4.1.60.103.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

trkAvailabilityStatus 1.3.6.1.4.1.562.2.4.1.60.103.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

trkProceduralStatus 1.3.6.1.4.1.562.2.4.1.60.103.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

trkControlStatus 1.3.6.1.4.1.562.2.4.1.60.103.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

trkAlarmStatus 1.3.6.1.4.1.562.2.4.1.60.103.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

trkStandbyStatus 1.3.6.1.4.1.562.2.4.1.60.103.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

trkUnknownStatus 1.3.6.1.4.1.562.2.4.1.60.103.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

trkOperStatusTable 1.3.6.1.4.1.562.2.4.1.60.104
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkOperStatusEntry

trkOperStatusEntry 1.3.6.1.4.1.562.2.4.1.60.104.1
An entry in the trkOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkOperStatusEntry  

trkSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.60.104.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

trkOperTable 1.3.6.1.4.1.562.2.4.1.60.105
This is the group of operational attributes supported by the Trunk.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkOperEntry

trkOperEntry 1.3.6.1.4.1.562.2.4.1.60.105.1
An entry in the trkOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkOperEntry  

trkRemoteComponentName 1.3.6.1.4.1.562.2.4.1.60.105.1.1
This attribute is the component name of the remote end which it has supplied through the Trunk staging protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..27)  

trkTransportTable 1.3.6.1.4.1.562.2.4.1.60.106
This group of attributes contains the set of operational parameters measured and maintained by both the Trunk and DpnGateway components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkTransportEntry

trkTransportEntry 1.3.6.1.4.1.562.2.4.1.60.106.1
An entry in the trkTransportTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkTransportEntry  

trkMeasuredSpeedToIf 1.3.6.1.4.1.562.2.4.1.60.106.1.1
This attribute indicates the current 'transmittable' bandwidth of the underlying facility. For a Trunk with a Unack subcomponent, and a DpnGateway with a Utp subcomponent, if a serial port is used, the value is the measured transmit speed of the port; if a channelized port (E1/DS1) is used, the value is the measured transmit speed of the Channel. For a Trunk with an AtmAccess subcomponent, the value is calculated by converting the VCC transmit cell rate to an equivalent bit rate. The VCC transmit cell rate is determined based on the vccReportingBw attribute of the Trunk AtmAccess component. If vccReportingBw has a value of pcr and attribute bwElastic of AtmAccess has a value of no, the peak cell rate (PCR) of the VCC, defined in txTrafficDescParm of AtmIf Vcc Vcd, is used. If vccReportingBw has a value of pcr and attribute bwElastic of AtmAccess has a value of yes, the minimum of the PCR, defined in txTrafficDescParm of AtmIf Vcc Vcd, and the current cell rate (CCR) of the VCC is used. If vccReportingBw has a value of acr, the best measurement of the actual cell rate (ACR) of the VCC is used, which is the minimum of the PCR, the CCR and the actual shaping rate (ASR). For a DpnGateway with a FrAccess subcomponent, the value indicates the committedInformationRate of FrAccess FrMuxSetup. A value of zero is displayed when the underlying facility is disabled or the current 'transmittable' bandwidth is unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

trkMeasuredRoundTripDelay 1.3.6.1.4.1.562.2.4.1.60.106.1.2
This attribute indicates the measured Round Trip Delay (msec) discovered with the remote through the Trunk and DpnGateway staging protocols. The value includes emission, propagation, and queuing delays. A 512 byte data packet is used to perform the measurement. A value of zero is displayed when the link is disabled or the measured Round Trip Delay is unknown.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Gauge32 0..1500  

trkMaxTxUnit 1.3.6.1.4.1.562.2.4.1.60.106.1.3
This is the maximum transmission unit (byte size) that is supported by the Trunk or DpnGateway component. This size includes the data and routing headers. A value of zero indicates the MTU has not yet been determined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..65535  

trkMeasuredRoundTripDelayUsec 1.3.6.1.4.1.562.2.4.1.60.106.1.4
This attribute indicates the measured Round Trip Delay (msec) discovered with the remote through the Trunk and DpnGateway staging protocols. The value includes emission, propagation, and queuing delays. A 512 byte data packet is used to perform the measurement. A value of zero is displayed when the link is disabled or the measured Round Trip Delay is unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  FixedPoint1 0..15000  

trkStatsTable 1.3.6.1.4.1.562.2.4.1.60.107
These attributes comprise the statistics collected by the Trunk component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkStatsEntry

trkStatsEntry 1.3.6.1.4.1.562.2.4.1.60.107.1
An entry in the trkStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkStatsEntry  

trkAreYouThereModeEntries 1.3.6.1.4.1.562.2.4.1.60.107.1.1
This attribute counts the number of times that the component has entered Are You There mode. This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

trkPktFromIf 1.3.6.1.4.1.562.2.4.1.60.107.1.2
This attribute counts the number of packets received from the remote module. It does not include the packets received from the interrupting queue. This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkTrunkPktFromIf 1.3.6.1.4.1.562.2.4.1.60.107.1.3
This attribute counts the number of internal trunk protocol packets (including those from the interrupting queue) received from the remote module. These packets are forwarded to the Trunk component. This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

trkTrunkPktToIf 1.3.6.1.4.1.562.2.4.1.60.107.1.4
This attribute counts the number of internal trunk protocol packets (including those through the interrupting queue) transmitted to the remote module. This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

trkDiscardUnforward 1.3.6.1.4.1.562.2.4.1.60.107.1.5
This attribute counts the number of packets received from the remote module that have been discarded. It does not include the packets received from the interrupting queue that have been discarded. This counter wraps around to zero when the maximum value is exceeded. Two main reasons that cause this counter to increase are: (1) the remote protocol is not compatible with the local protocol stack or, (2) the packet cannot be forwarded due to a recent loss of connectivity or due to congestion.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkDiscardTrunkPktFromIf 1.3.6.1.4.1.562.2.4.1.60.107.1.6
This attribute counts the number of internal trunk protocol packets (including those on the interrupting queue) received from the remote module that have been discarded. This counter wraps around to zero when the maximum value is exceeded. The three main reasons that cause this counter to increase are: (1) the two Trunks are not synchronized, (2) the remote trunk protocol is not the same version as the local protocol, and (3) the remote trunk has restaged.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

trkIntPktFromIf 1.3.6.1.4.1.562.2.4.1.60.107.1.7
This attribute counts the number of packets received on the interrupting queue from the remote module. This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkDiscardIntUnforward 1.3.6.1.4.1.562.2.4.1.60.107.1.8
This attribute counts the number of packets received on the interrupting queue from the remote module that have been discarded. This counter wraps around to zero when the maximum value is exceeded. Two main reasons that cause this counter to increment are: (1) the remote protocol is not compatible to the local protocol stack and, (2) the packet cannot be forwarded due to either a recent loss of connectivity or due to congestion.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkStagingAttempts 1.3.6.1.4.1.562.2.4.1.60.107.1.9
This attribute counts the number of times that the staging protocol has attempted to stage with the remote module. This counter wraps around to zero when the maximum value is exceeded. The main reason that causes this counter to increment is that the local hardware is up but, the local protocol cannot stage with the remote protocol due to a faulty connection. If the value is zero, then the local hardware has never enabled successfully.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

trkDiscardTrunkPktToIf 1.3.6.1.4.1.562.2.4.1.60.107.1.10
This attribute counts the number of internal trunk protocol packets (including those through the interrupting queue) that have been discarded before being transmitted to the remote module. This counter wraps around to zero when the maximum value is exceeded. The main reason that causes this counter to increment is that the trunk can not get sufficient resources to create an internal trunk protocol packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

trkUtilization 1.3.6.1.4.1.562.2.4.1.60.107.1.11
This attribute indicates the average trunk utilization. For a Trunk/n with an Unack subcomponent, the value is the link receive utilization. It is calculated every minute by comparing the number of octets received from the remote module against the value of the Trunk/n measuredSpeedToIf. Since the trunk application solely owns the physical link, the maximum link utilization is 100%. For a Trunk/n with an AtmAccess subcomponent, the value is the VCC(s) transmit utilization. It is calculated every 30 seconds by comparing the number of cells transmitted by AtmIf Vcc(s) against the value of the Trunk/n measuredSpeedToIf. The VCCs include the trunk VCC indicated by atmConnection of Trunk/n AtmAccess and the PORS SPO (Short Path Oriented) multiplexing VCC if applicable. The PORS SPO multiplexing VCC only applies to a Trunk/n with subcomponents Pa AtmAccess, where the mode of AtmAccess is multiplexing, and the AtmAccess is linked to a second VCC indicated by atmConnection of Pa AtmAccess. Since the trunk application shares a physical link with other applications, the VCCs utilization can exceed 100%, and the value 200% is chosen as the maximum calculated utilization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..200  

trkSpeedReportingTable 1.3.6.1.4.1.562.2.4.1.60.109
This group of provisionable attributes provides the ability to disable or enable the generation of speed change alarms by the Trunk component. It also provides the ability to disable or enable the Dynamic Speed Reporting mechanism.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkSpeedReportingEntry

trkSpeedReportingEntry 1.3.6.1.4.1.562.2.4.1.60.109.1
An entry in the trkSpeedReportingTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkSpeedReportingEntry  

trkSpeedReportingHoldOff 1.3.6.1.4.1.562.2.4.1.60.109.1.2
This attribute specifies the hold off time for reporting speed increases. When the measuredSpeedToIf reaches a level specified by the speedReportingThresholds attribute, the value specifies the duration (in units of seconds) for which the measuredSpeedToIf must maintain that level before it will be reported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1200  

trkLowSpeedAlarmThreshold 1.3.6.1.4.1.562.2.4.1.60.109.1.3
This attribute specifies the lower end of the range of normal speeds for this Trunk. If the measuredSpeedToIf drops below this value the Trunk component generates a SET alarm. When the measuredSpeedToIf reaches or exceeds the value of this attribute, the Trunk component will generate a CLEAR alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..4294967295  

trkHighSpeedAlarmThreshold 1.3.6.1.4.1.562.2.4.1.60.109.1.4
This attribute specifies the upper end of the range of normal speeds for this Trunk. If the measuredSpeedToIf exceeds this value the Trunk component generates a SET alarm. When the measuredSpeedToIf returns to or falls below the value of this attribute, the Trunk component will generate a CLEAR alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4294967295  

trkSpdThTable 1.3.6.1.4.1.562.2.4.1.60.318
This attribute controls the behavior of the Dynamic Speed Reporting mechanism. If its value is empty then the mechanism is disabled and neither increases nor decreases are reported. Otherwise, the attribute may contain up to seven threshold levels which are used to control the reporting of speed increases. Speed decreases are always reported immediately. If the measuredSpeedToIf increases such that it reaches one of the threshold levels which is greater than the last reported speed, the Trunk starts the speedReportingHoldOff timer. If the speed remains above this threshold until the timer expires, the Trunk component then reports the measuredSpeedToIf; otherwise the increase is not reported.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkSpdThEntry

trkSpdThEntry 1.3.6.1.4.1.562.2.4.1.60.318.1
An entry in the trkSpdThTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkSpdThEntry  

trkSpdThValue 1.3.6.1.4.1.562.2.4.1.60.318.1.1
This variable represents both the value and the index for the trkSpdThTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Integer32 0..268435455  

trkSpdThRowStatus 1.3.6.1.4.1.562.2.4.1.60.318.1.2
This variable is used to control the addition and deletion of individual values of the trkSpdThTable.
Status: mandatory Access: write-only
OBJECT-TYPE    
  RowStatus  

trkPktBpTable 1.3.6.1.4.1.562.2.4.1.60.368
This attribute counts the number of packets received by the Trunk. It is a vector indexed by the emission priorities (ep0, ep1, and ep2) of the packets. The highest emission priority is ep0. These counters wrap around to zero when the maximum value is exceeded.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkPktBpEntry

trkPktBpEntry 1.3.6.1.4.1.562.2.4.1.60.368.1
An entry in the trkPktBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkPktBpEntry  

trkPktBpIndex 1.3.6.1.4.1.562.2.4.1.60.368.1.1
This variable represents the trkPktBpTable specific index for the trkPktBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

trkPktBpValue 1.3.6.1.4.1.562.2.4.1.60.368.1.2
This variable represents an individual value for the trkPktBpTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkDiscBpTable 1.3.6.1.4.1.562.2.4.1.60.369
This attribute counts the number of packets received from the remote module that have been discarded. It is a vector indexed by the emission priorities (ep0, ep1 and ep2) of the packets. The highest emission priority is ep0. These counters wrap around to zero when the maximum value is exceeded. Two main reasons that cause this counter to increment are: (1) the remote protocol is not compatible to the local protocol stack and, (2) the packet cannot be forwarded due to either a recent loss of connectivity or due to congestion. DESCRIPTION
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkDiscBpEntry

trkDiscBpEntry 1.3.6.1.4.1.562.2.4.1.60.369.1
An entry in the trkDiscBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkDiscBpEntry  

trkDiscBpIndex 1.3.6.1.4.1.562.2.4.1.60.369.1.1
This variable represents the trkDiscBpTable specific index for the trkDiscBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

trkDiscBpValue 1.3.6.1.4.1.562.2.4.1.60.369.1.2
This variable represents an individual value for the trkDiscBpTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkOctBpTable 1.3.6.1.4.1.562.2.4.1.60.370
This attribute counts the octets coming from the remote module which are received by the Trunk. It is a vector indexed by the emission priorities (ep0, ep1 and ep2) of the packets. The highest emission priority is ep0. These counters wrap around to zero when the maximum value is exceeded.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkOctBpEntry

trkOctBpEntry 1.3.6.1.4.1.562.2.4.1.60.370.1
An entry in the trkOctBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkOctBpEntry  

trkOctBpIndex 1.3.6.1.4.1.562.2.4.1.60.370.1.1
This variable represents the trkOctBpTable specific index for the trkOctBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

trkOctBpValue 1.3.6.1.4.1.562.2.4.1.60.370.1.2
This variable represents an individual value for the trkOctBpTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkPorsStats 1.3.6.1.4.1.562.2.4.1.60.6
OBJECT IDENTIFIER    

trkPorsStatsRowStatusTable 1.3.6.1.4.1.562.2.4.1.60.6.1
This entry controls the addition and deletion of trkPorsStats components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkPorsStatsRowStatusEntry

trkPorsStatsRowStatusEntry 1.3.6.1.4.1.562.2.4.1.60.6.1.1
A single entry in the table represents a single trkPorsStats component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkPorsStatsRowStatusEntry  

trkPorsStatsRowStatus 1.3.6.1.4.1.562.2.4.1.60.6.1.1.1
This variable is used as the basis for SNMP naming of trkPorsStats components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

trkPorsStatsComponentName 1.3.6.1.4.1.562.2.4.1.60.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

trkPorsStatsStorageType 1.3.6.1.4.1.562.2.4.1.60.6.1.1.4
This variable represents the storage type value for the trkPorsStats tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

trkPorsStatsIndex 1.3.6.1.4.1.562.2.4.1.60.6.1.1.10
This variable represents the index for the trkPorsStats tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

trkPorsStatsOperTable 1.3.6.1.4.1.562.2.4.1.60.6.10
This operational group provides the PORS Trunks interrupting and normal traffic statistics for operator console display.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkPorsStatsOperEntry

trkPorsStatsOperEntry 1.3.6.1.4.1.562.2.4.1.60.6.10.1
An entry in the trkPorsStatsOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkPorsStatsOperEntry  

trkPorsStatsPorsNormPktFromIf 1.3.6.1.4.1.562.2.4.1.60.6.10.1.1
This attribute counts the number of normal priority packets received on the PORS Trunk normal priority queue. This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkPorsStatsPorsNormDiscUnforwardFromIf 1.3.6.1.4.1.562.2.4.1.60.6.10.1.2
This attribute counts the number of normal priority packets discarded from the PORS Trunk normal priority queue. This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkPorsStatsPorsNormOctetFromIf 1.3.6.1.4.1.562.2.4.1.60.6.10.1.3
This attribute counts the number of normal priority bytes received on the PORS Trunk normal priority queue.This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkPorsStatsPorsIntPktFromIf 1.3.6.1.4.1.562.2.4.1.60.6.10.1.4
This attribute counts the number of interrupting priority packets received on the PORS Trunk interrupting priority queue. This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkPorsStatsPorsIntDiscUnforwardFromIf 1.3.6.1.4.1.562.2.4.1.60.6.10.1.5
This attribute counts the number of interrupting priority packets discarded from the PORS Trunk interrupting priority queue. This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkPorsStatsPorsIntOctetFromIf 1.3.6.1.4.1.562.2.4.1.60.6.10.1.6
This attribute counts the number of interrupting priority bytes received on the PORS Trunk interrupting priority queue. This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkPorsStatsPktBpTable 1.3.6.1.4.1.562.2.4.1.60.6.371
This attribute counts the number of PORS packets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkPorsStatsPktBpEntry

trkPorsStatsPktBpEntry 1.3.6.1.4.1.562.2.4.1.60.6.371.1
An entry in the trkPorsStatsPktBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkPorsStatsPktBpEntry  

trkPorsStatsPktBpEpIndex 1.3.6.1.4.1.562.2.4.1.60.6.371.1.1
This variable represents the next to last index for the trkPorsStatsPktBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

trkPorsStatsPktBpDpIndex 1.3.6.1.4.1.562.2.4.1.60.6.371.1.2
This variable represents the final index for the trkPorsStatsPktBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

trkPorsStatsPktBpValue 1.3.6.1.4.1.562.2.4.1.60.6.371.1.3
This variable represents an individual value for the trkPorsStatsPktBpTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkPorsStatsDiscBpTable 1.3.6.1.4.1.562.2.4.1.60.6.372
This attribute counts the number of PORS packets received from the remote module that have been discarded. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkPorsStatsDiscBpEntry

trkPorsStatsDiscBpEntry 1.3.6.1.4.1.562.2.4.1.60.6.372.1
An entry in the trkPorsStatsDiscBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkPorsStatsDiscBpEntry  

trkPorsStatsDiscBpEpIndex 1.3.6.1.4.1.562.2.4.1.60.6.372.1.1
This variable represents the next to last index for the trkPorsStatsDiscBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

trkPorsStatsDiscBpDpIndex 1.3.6.1.4.1.562.2.4.1.60.6.372.1.2
This variable represents the final index for the trkPorsStatsDiscBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

trkPorsStatsDiscBpValue 1.3.6.1.4.1.562.2.4.1.60.6.372.1.3
This variable represents an individual value for the trkPorsStatsDiscBpTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkPorsStatsOctBpTable 1.3.6.1.4.1.562.2.4.1.60.6.373
This attribute counts the number of PORS octets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkPorsStatsOctBpEntry

trkPorsStatsOctBpEntry 1.3.6.1.4.1.562.2.4.1.60.6.373.1
An entry in the trkPorsStatsOctBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkPorsStatsOctBpEntry  

trkPorsStatsOctBpEpIndex 1.3.6.1.4.1.562.2.4.1.60.6.373.1.1
This variable represents the next to last index for the trkPorsStatsOctBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

trkPorsStatsOctBpDpIndex 1.3.6.1.4.1.562.2.4.1.60.6.373.1.2
This variable represents the final index for the trkPorsStatsOctBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

trkPorsStatsOctBpValue 1.3.6.1.4.1.562.2.4.1.60.6.373.1.3
This variable represents an individual value for the trkPorsStatsOctBpTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkFwdStats 1.3.6.1.4.1.562.2.4.1.60.7
OBJECT IDENTIFIER    

trkFwdStatsRowStatusTable 1.3.6.1.4.1.562.2.4.1.60.7.1
This entry controls the addition and deletion of trkFwdStats components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkFwdStatsRowStatusEntry

trkFwdStatsRowStatusEntry 1.3.6.1.4.1.562.2.4.1.60.7.1.1
A single entry in the table represents a single trkFwdStats component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkFwdStatsRowStatusEntry  

trkFwdStatsRowStatus 1.3.6.1.4.1.562.2.4.1.60.7.1.1.1
This variable is used as the basis for SNMP naming of trkFwdStats components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

trkFwdStatsComponentName 1.3.6.1.4.1.562.2.4.1.60.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

trkFwdStatsStorageType 1.3.6.1.4.1.562.2.4.1.60.7.1.1.4
This variable represents the storage type value for the trkFwdStats tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

trkFwdStatsIndex 1.3.6.1.4.1.562.2.4.1.60.7.1.1.10
This variable represents the index for the trkFwdStats tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

trkFwdStatsOperTable 1.3.6.1.4.1.562.2.4.1.60.7.10
This operational group counts the Trunk or DpnGateway packet forwarding traffic statistics for operator console display.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkFwdStatsOperEntry

trkFwdStatsOperEntry 1.3.6.1.4.1.562.2.4.1.60.7.10.1
An entry in the trkFwdStatsOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkFwdStatsOperEntry  

trkFwdStatsFwdPktFromIf 1.3.6.1.4.1.562.2.4.1.60.7.10.1.1
This attribute counts the number of forwarding packets received by the Trunk or DpnGateway. This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkFwdStatsFwdDiscUnforwardFromIf 1.3.6.1.4.1.562.2.4.1.60.7.10.1.2
This attribute counts the number of forwarding packets discarded by the Trunk or DpnGateway. This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkFwdStatsFwdOctetFromIf 1.3.6.1.4.1.562.2.4.1.60.7.10.1.3
This attribute counts the number of forwarding bytes received by the Trunk or DpnGateway. This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkVnsStats 1.3.6.1.4.1.562.2.4.1.60.8
OBJECT IDENTIFIER    

trkVnsStatsRowStatusTable 1.3.6.1.4.1.562.2.4.1.60.8.1
This entry controls the addition and deletion of trkVnsStats components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkVnsStatsRowStatusEntry

trkVnsStatsRowStatusEntry 1.3.6.1.4.1.562.2.4.1.60.8.1.1
A single entry in the table represents a single trkVnsStats component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkVnsStatsRowStatusEntry  

trkVnsStatsRowStatus 1.3.6.1.4.1.562.2.4.1.60.8.1.1.1
This variable is used as the basis for SNMP naming of trkVnsStats components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

trkVnsStatsComponentName 1.3.6.1.4.1.562.2.4.1.60.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

trkVnsStatsStorageType 1.3.6.1.4.1.562.2.4.1.60.8.1.1.4
This variable represents the storage type value for the trkVnsStats tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

trkVnsStatsIndex 1.3.6.1.4.1.562.2.4.1.60.8.1.1.10
This variable represents the index for the trkVnsStats tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

trkVnsStatsOperTable 1.3.6.1.4.1.562.2.4.1.60.8.10
This operational group counts the Trunk virtual network traffic statistics for operator console display.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkVnsStatsOperEntry

trkVnsStatsOperEntry 1.3.6.1.4.1.562.2.4.1.60.8.10.1
An entry in the trkVnsStatsOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkVnsStatsOperEntry  

trkVnsStatsVnsPktFromIf 1.3.6.1.4.1.562.2.4.1.60.8.10.1.1
This attribute counts the number of virtual network packets received by a Trunk component handling virtual network traffic. This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkVnsStatsVnsDiscUnforwardFromIf 1.3.6.1.4.1.562.2.4.1.60.8.10.1.2
This attribute counts the number of virtual network packets discarded by a Trunk component handling virtual network traffic. This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkVnsStatsVnsOctetFromIf 1.3.6.1.4.1.562.2.4.1.60.8.10.1.3
This attribute counts the number of virtual network bytes received by a Trunk component handling virtual network traffic. This counter wraps around to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkVnsStatsPktBpTable 1.3.6.1.4.1.562.2.4.1.60.8.377
This attribute counts the number of Virtual Network packets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkVnsStatsPktBpEntry

trkVnsStatsPktBpEntry 1.3.6.1.4.1.562.2.4.1.60.8.377.1
An entry in the trkVnsStatsPktBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkVnsStatsPktBpEntry  

trkVnsStatsPktBpEpIndex 1.3.6.1.4.1.562.2.4.1.60.8.377.1.1
This variable represents the next to last index for the trkVnsStatsPktBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

trkVnsStatsPktBpDpIndex 1.3.6.1.4.1.562.2.4.1.60.8.377.1.2
This variable represents the final index for the trkVnsStatsPktBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

trkVnsStatsPktBpValue 1.3.6.1.4.1.562.2.4.1.60.8.377.1.3
This variable represents an individual value for the trkVnsStatsPktBpTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkVnsStatsDiscBpTable 1.3.6.1.4.1.562.2.4.1.60.8.378
This attribute counts the number of Virtual Network packets received from the remote module that have been discarded by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkVnsStatsDiscBpEntry

trkVnsStatsDiscBpEntry 1.3.6.1.4.1.562.2.4.1.60.8.378.1
An entry in the trkVnsStatsDiscBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkVnsStatsDiscBpEntry  

trkVnsStatsDiscBpEpIndex 1.3.6.1.4.1.562.2.4.1.60.8.378.1.1
This variable represents the next to last index for the trkVnsStatsDiscBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

trkVnsStatsDiscBpDpIndex 1.3.6.1.4.1.562.2.4.1.60.8.378.1.2
This variable represents the final index for the trkVnsStatsDiscBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

trkVnsStatsDiscBpValue 1.3.6.1.4.1.562.2.4.1.60.8.378.1.3
This variable represents an individual value for the trkVnsStatsDiscBpTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkVnsStatsOctBpTable 1.3.6.1.4.1.562.2.4.1.60.8.379
This attribute counts the number of Virtual Network octets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkVnsStatsOctBpEntry

trkVnsStatsOctBpEntry 1.3.6.1.4.1.562.2.4.1.60.8.379.1
An entry in the trkVnsStatsOctBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkVnsStatsOctBpEntry  

trkVnsStatsOctBpEpIndex 1.3.6.1.4.1.562.2.4.1.60.8.379.1.1
This variable represents the next to last index for the trkVnsStatsOctBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

trkVnsStatsOctBpDpIndex 1.3.6.1.4.1.562.2.4.1.60.8.379.1.2
This variable represents the final index for the trkVnsStatsOctBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

trkVnsStatsOctBpValue 1.3.6.1.4.1.562.2.4.1.60.8.379.1.3
This variable represents an individual value for the trkVnsStatsOctBpTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkDprsStats 1.3.6.1.4.1.562.2.4.1.60.10
OBJECT IDENTIFIER    

trkDprsStatsRowStatusTable 1.3.6.1.4.1.562.2.4.1.60.10.1
This entry controls the addition and deletion of trkDprsStats components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkDprsStatsRowStatusEntry

trkDprsStatsRowStatusEntry 1.3.6.1.4.1.562.2.4.1.60.10.1.1
A single entry in the table represents a single trkDprsStats component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkDprsStatsRowStatusEntry  

trkDprsStatsRowStatus 1.3.6.1.4.1.562.2.4.1.60.10.1.1.1
This variable is used as the basis for SNMP naming of trkDprsStats components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

trkDprsStatsComponentName 1.3.6.1.4.1.562.2.4.1.60.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

trkDprsStatsStorageType 1.3.6.1.4.1.562.2.4.1.60.10.1.1.4
This variable represents the storage type value for the trkDprsStats tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

trkDprsStatsIndex 1.3.6.1.4.1.562.2.4.1.60.10.1.1.10
This variable represents the index for the trkDprsStats tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

trkDprsStatsPktBpTable 1.3.6.1.4.1.562.2.4.1.60.10.374
This attribute counts the number of DPRS packets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkDprsStatsPktBpEntry

trkDprsStatsPktBpEntry 1.3.6.1.4.1.562.2.4.1.60.10.374.1
An entry in the trkDprsStatsPktBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkDprsStatsPktBpEntry  

trkDprsStatsPktBpEpIndex 1.3.6.1.4.1.562.2.4.1.60.10.374.1.1
This variable represents the next to last index for the trkDprsStatsPktBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

trkDprsStatsPktBpDpIndex 1.3.6.1.4.1.562.2.4.1.60.10.374.1.2
This variable represents the final index for the trkDprsStatsPktBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

trkDprsStatsPktBpValue 1.3.6.1.4.1.562.2.4.1.60.10.374.1.3
This variable represents an individual value for the trkDprsStatsPktBpTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkDprsStatsDiscBpTable 1.3.6.1.4.1.562.2.4.1.60.10.375
This attribute counts the number of DPRS packets received from the remote module that have been discarded by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkDprsStatsDiscBpEntry

trkDprsStatsDiscBpEntry 1.3.6.1.4.1.562.2.4.1.60.10.375.1
An entry in the trkDprsStatsDiscBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkDprsStatsDiscBpEntry  

trkDprsStatsDiscBpEpIndex 1.3.6.1.4.1.562.2.4.1.60.10.375.1.1
This variable represents the next to last index for the trkDprsStatsDiscBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

trkDprsStatsDiscBpDpIndex 1.3.6.1.4.1.562.2.4.1.60.10.375.1.2
This variable represents the final index for the trkDprsStatsDiscBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

trkDprsStatsDiscBpValue 1.3.6.1.4.1.562.2.4.1.60.10.375.1.3
This variable represents an individual value for the trkDprsStatsDiscBpTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trkDprsStatsOctBpTable 1.3.6.1.4.1.562.2.4.1.60.10.376
This attribute counts the number of DPRS octets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrkDprsStatsOctBpEntry

trkDprsStatsOctBpEntry 1.3.6.1.4.1.562.2.4.1.60.10.376.1
An entry in the trkDprsStatsOctBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrkDprsStatsOctBpEntry  

trkDprsStatsOctBpEpIndex 1.3.6.1.4.1.562.2.4.1.60.10.376.1.1
This variable represents the next to last index for the trkDprsStatsOctBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

trkDprsStatsOctBpDpIndex 1.3.6.1.4.1.562.2.4.1.60.10.376.1.2
This variable represents the final index for the trkDprsStatsOctBpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

trkDprsStatsOctBpValue 1.3.6.1.4.1.562.2.4.1.60.10.376.1.3
This variable represents an individual value for the trkDprsStatsOctBpTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

trunksGroup 1.3.6.1.4.1.562.2.4.2.43.1
OBJECT IDENTIFIER    

trunksGroupBE 1.3.6.1.4.1.562.2.4.2.43.1.5
OBJECT IDENTIFIER    

trunksGroupBE00 1.3.6.1.4.1.562.2.4.2.43.1.5.1
OBJECT IDENTIFIER    

trunksGroupBE00A 1.3.6.1.4.1.562.2.4.2.43.1.5.1.2
OBJECT IDENTIFIER    

trunksCapabilities 1.3.6.1.4.1.562.2.4.2.43.3
OBJECT IDENTIFIER    

trunksCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.43.3.5
OBJECT IDENTIFIER    

trunksCapabilitiesBE00 1.3.6.1.4.1.562.2.4.2.43.3.5.1
OBJECT IDENTIFIER    

trunksCapabilitiesBE00A 1.3.6.1.4.1.562.2.4.2.43.3.5.1.2
OBJECT IDENTIFIER