Nortel-Magellan-Passport-IpVrrpMIB

File: Nortel-Magellan-Passport-IpVrrpMIB.mib (29751 bytes)

Imported modules

RFC-1212 RFC1155-SMI Nortel-Magellan-Passport-UsefulDefinitionsMIB
Nortel-Magellan-Passport-StandardTextualConventionsMIB Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-IpMIB
Nortel-Magellan-Passport-VirtualRouterMIB

Imported symbols

OBJECT-TYPE IpAddress passportMIBs
DisplayString StorageType RowStatus
Integer32 MacAddress Unsigned32
NonReplicated Link vrIpIndex
vrPpIpPortIndex vrIp vrPpIpPort
vrIndex vrPpIndex

Defined Types

VrPpIpPortVrrpRowStatusEntry  
SEQUENCE    
  vrPpIpPortVrrpRowStatus RowStatus
  vrPpIpPortVrrpComponentName DisplayString
  vrPpIpPortVrrpStorageType StorageType
  vrPpIpPortVrrpIndex Integer32

VrPpIpPortVrrpProvEntry  
SEQUENCE    
  vrPpIpPortVrrpPriority Unsigned32
  vrPpIpPortVrrpAdvertInterval Unsigned32
  vrPpIpPortVrrpLinkToCriticalIp Link

VrPpIpPortVrrpOperEntry  
SEQUENCE    
  vrPpIpPortVrrpVirtualRouterState INTEGER
  vrPpIpPortVrrpVirtualRouterPhysicalAddress MacAddress

VrPpIpPortVrrpAdminControlEntry  
SEQUENCE    
  vrPpIpPortVrrpSnmpAdminStatus INTEGER

VrPpIpPortVrrpOperStatusEntry  
SEQUENCE    
  vrPpIpPortVrrpSnmpOperStatus INTEGER

VrPpIpPortVrrpStateEntry  
SEQUENCE    
  vrPpIpPortVrrpAdminState INTEGER
  vrPpIpPortVrrpOperationalState INTEGER
  vrPpIpPortVrrpUsageState INTEGER

VrPpIpPortVrrpIpAddressesEntry  
SEQUENCE    
  vrPpIpPortVrrpIpAddressesValue IpAddress
  vrPpIpPortVrrpIpAddressesRowStatus RowStatus

VrPpIpPortCriticalIpRowStatusEntry  
SEQUENCE    
  vrPpIpPortCriticalIpRowStatus RowStatus
  vrPpIpPortCriticalIpComponentName DisplayString
  vrPpIpPortCriticalIpStorageType StorageType
  vrPpIpPortCriticalIpIndex Integer32

VrPpIpPortCriticalIpProvEntry  
SEQUENCE    
  vrPpIpPortCriticalIpLinkToVrrp Link

VrIpIpVrrpRowStatusEntry  
SEQUENCE    
  vrIpIpVrrpRowStatus RowStatus
  vrIpIpVrrpComponentName DisplayString
  vrIpIpVrrpStorageType StorageType
  vrIpIpVrrpIndex NonReplicated

VrIpIpVrrpAdminControlEntry  
SEQUENCE    
  vrIpIpVrrpSnmpAdminStatus INTEGER

VrIpIpVrrpOperStatusEntry  
SEQUENCE    
  vrIpIpVrrpSnmpOperStatus INTEGER

VrIpIpVrrpStateEntry  
SEQUENCE    
  vrIpIpVrrpAdminState INTEGER
  vrIpIpVrrpOperationalState INTEGER
  vrIpIpVrrpUsageState INTEGER

Defined Values

ipVrrpMIB 1.3.6.1.4.1.562.2.4.2.161
OBJECT IDENTIFIER    

vrPpIpPortVrrp 1.3.6.1.4.1.562.2.4.1.100.3.5.17
OBJECT IDENTIFIER    

vrPpIpPortVrrpRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.5.17.1
This entry controls the addition and deletion of vrPpIpPortVrrp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortVrrpRowStatusEntry

vrPpIpPortVrrpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.17.1.1
A single entry in the table represents a single vrPpIpPortVrrp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortVrrpRowStatusEntry  

vrPpIpPortVrrpRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.17.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpPortVrrp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrPpIpPortVrrpComponentName 1.3.6.1.4.1.562.2.4.1.100.3.5.17.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpPortVrrpStorageType 1.3.6.1.4.1.562.2.4.1.100.3.5.17.1.1.4
This variable represents the storage type value for the vrPpIpPortVrrp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpPortVrrpIndex 1.3.6.1.4.1.562.2.4.1.100.3.5.17.1.1.10
This variable represents the index for the vrPpIpPortVrrp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..255  

vrPpIpPortVrrpProvTable 1.3.6.1.4.1.562.2.4.1.100.3.5.17.2
This group contains the provisionable attributes for the IpVrrpPort component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortVrrpProvEntry

vrPpIpPortVrrpProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.17.2.1
An entry in the vrPpIpPortVrrpProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortVrrpProvEntry  

vrPpIpPortVrrpPriority 1.3.6.1.4.1.562.2.4.1.100.3.5.17.2.1.1
This attribute specifies the priority of the IpVrrpPort in Master election. Value of 0 (zero) is reserved for Master router to indicate it is releasing responsibility for the virtual router. The value of 255 (decimal) is reserved fro the router that owns the IP addresses associated with the IpVrrpPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

vrPpIpPortVrrpAdvertInterval 1.3.6.1.4.1.562.2.4.1.100.3.5.17.2.1.3
This attribute specifies the time interval between ADVERTIMSEMENTS (seconds). Default is 1 second.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

vrPpIpPortVrrpLinkToCriticalIp 1.3.6.1.4.1.562.2.4.1.100.3.5.17.2.1.5
This attribute specifies the ip interface this IpVrrpPort is linked to. When the ip interface it is linked to is down, the vrrp component should go down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

vrPpIpPortVrrpOperTable 1.3.6.1.4.1.562.2.4.1.100.3.5.17.13
This group contains operational attributes for an IpVrrpPort component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortVrrpOperEntry

vrPpIpPortVrrpOperEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.17.13.1
An entry in the vrPpIpPortVrrpOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortVrrpOperEntry  

vrPpIpPortVrrpVirtualRouterState 1.3.6.1.4.1.562.2.4.1.100.3.5.17.13.1.1
This attribute indicates the state of this IpVrrpPort. It will be one the three states: initialize, backup and master.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initialize(0), backup(1), master(2)  

vrPpIpPortVrrpVirtualRouterPhysicalAddress 1.3.6.1.4.1.562.2.4.1.100.3.5.17.13.1.2
This attributes indicates the Mac address of the IpVrrpPort. The address is 00 00 5e 00 01 vrrpId
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress Size(6)  

vrPpIpPortVrrpAdminControlTable 1.3.6.1.4.1.562.2.4.1.100.3.5.17.30
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortVrrpAdminControlEntry

vrPpIpPortVrrpAdminControlEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.17.30.1
An entry in the vrPpIpPortVrrpAdminControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortVrrpAdminControlEntry  

vrPpIpPortVrrpSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.17.30.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrPpIpPortVrrpOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.5.17.31
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortVrrpOperStatusEntry

vrPpIpPortVrrpOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.17.31.1
An entry in the vrPpIpPortVrrpOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortVrrpOperStatusEntry  

vrPpIpPortVrrpSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.17.31.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrPpIpPortVrrpStateTable 1.3.6.1.4.1.562.2.4.1.100.3.5.17.32
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortVrrpStateEntry

vrPpIpPortVrrpStateEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.17.32.1
An entry in the vrPpIpPortVrrpStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortVrrpStateEntry  

vrPpIpPortVrrpAdminState 1.3.6.1.4.1.562.2.4.1.100.3.5.17.32.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrPpIpPortVrrpOperationalState 1.3.6.1.4.1.562.2.4.1.100.3.5.17.32.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrPpIpPortVrrpUsageState 1.3.6.1.4.1.562.2.4.1.100.3.5.17.32.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrPpIpPortVrrpIpAddressesTable 1.3.6.1.4.1.562.2.4.1.100.3.5.17.700
This attribute specifies one or more IP addresses associated with this IpVrrpPort.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortVrrpIpAddressesEntry

vrPpIpPortVrrpIpAddressesEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.17.700.1
An entry in the vrPpIpPortVrrpIpAddressesTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortVrrpIpAddressesEntry  

vrPpIpPortVrrpIpAddressesValue 1.3.6.1.4.1.562.2.4.1.100.3.5.17.700.1.1
This variable represents both the value and the index for the vrPpIpPortVrrpIpAddressesTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrPpIpPortVrrpIpAddressesRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.17.700.1.2
This variable is used to control the addition and deletion of individual values of the vrPpIpPortVrrpIpAddressesTable.
Status: mandatory Access: write-only
OBJECT-TYPE    
  RowStatus  

vrPpIpPortCriticalIp 1.3.6.1.4.1.562.2.4.1.100.3.5.18
OBJECT IDENTIFIER    

vrPpIpPortCriticalIpRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.5.18.1
This entry controls the addition and deletion of vrPpIpPortCriticalIp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortCriticalIpRowStatusEntry

vrPpIpPortCriticalIpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.18.1.1
A single entry in the table represents a single vrPpIpPortCriticalIp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortCriticalIpRowStatusEntry  

vrPpIpPortCriticalIpRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.18.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpPortCriticalIp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrPpIpPortCriticalIpComponentName 1.3.6.1.4.1.562.2.4.1.100.3.5.18.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpPortCriticalIpStorageType 1.3.6.1.4.1.562.2.4.1.100.3.5.18.1.1.4
This variable represents the storage type value for the vrPpIpPortCriticalIp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpPortCriticalIpIndex 1.3.6.1.4.1.562.2.4.1.100.3.5.18.1.1.10
This variable represents the index for the vrPpIpPortCriticalIp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..255  

vrPpIpPortCriticalIpProvTable 1.3.6.1.4.1.562.2.4.1.100.3.5.18.24
This group contains the provisionable attributes for the CriticalIp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortCriticalIpProvEntry

vrPpIpPortCriticalIpProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.18.24.1
An entry in the vrPpIpPortCriticalIpProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortCriticalIpProvEntry  

vrPpIpPortCriticalIpLinkToVrrp 1.3.6.1.4.1.562.2.4.1.100.3.5.18.24.1.1
This attribute defines which IpVrrpPort this CriticalIp interface belongs to. When this interface goes down, the IpVrrpPort that this Critical Ip interface is associated with is inactive and can not be elected as master.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

vrIpIpVrrp 1.3.6.1.4.1.562.2.4.1.100.6.25
OBJECT IDENTIFIER    

vrIpIpVrrpRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.25.1
This entry controls the addition and deletion of vrIpIpVrrp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpIpVrrpRowStatusEntry

vrIpIpVrrpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.25.1.1
A single entry in the table represents a single vrIpIpVrrp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpIpVrrpRowStatusEntry  

vrIpIpVrrpRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.25.1.1.1
This variable is used as the basis for SNMP naming of vrIpIpVrrp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpIpVrrpComponentName 1.3.6.1.4.1.562.2.4.1.100.6.25.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpIpVrrpStorageType 1.3.6.1.4.1.562.2.4.1.100.6.25.1.1.4
This variable represents the storage type value for the vrIpIpVrrp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpIpVrrpIndex 1.3.6.1.4.1.562.2.4.1.100.6.25.1.1.10
This variable represents the index for the vrIpIpVrrp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpIpVrrpAdminControlTable 1.3.6.1.4.1.562.2.4.1.100.6.25.30
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpIpVrrpAdminControlEntry

vrIpIpVrrpAdminControlEntry 1.3.6.1.4.1.562.2.4.1.100.6.25.30.1
An entry in the vrIpIpVrrpAdminControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpIpVrrpAdminControlEntry  

vrIpIpVrrpSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.6.25.30.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpIpVrrpOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.25.31
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpIpVrrpOperStatusEntry

vrIpIpVrrpOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.25.31.1
An entry in the vrIpIpVrrpOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpIpVrrpOperStatusEntry  

vrIpIpVrrpSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.6.25.31.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpIpVrrpStateTable 1.3.6.1.4.1.562.2.4.1.100.6.25.32
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpIpVrrpStateEntry

vrIpIpVrrpStateEntry 1.3.6.1.4.1.562.2.4.1.100.6.25.32.1
An entry in the vrIpIpVrrpStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpIpVrrpStateEntry  

vrIpIpVrrpAdminState 1.3.6.1.4.1.562.2.4.1.100.6.25.32.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrIpIpVrrpOperationalState 1.3.6.1.4.1.562.2.4.1.100.6.25.32.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpIpVrrpUsageState 1.3.6.1.4.1.562.2.4.1.100.6.25.32.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

ipVrrpGroup 1.3.6.1.4.1.562.2.4.2.161.1
OBJECT IDENTIFIER    

ipVrrpGroupBG 1.3.6.1.4.1.562.2.4.2.161.1.7
OBJECT IDENTIFIER    

ipVrrpGroupBG00 1.3.6.1.4.1.562.2.4.2.161.1.7.1
OBJECT IDENTIFIER    

ipVrrpGroupBG00A 1.3.6.1.4.1.562.2.4.2.161.1.7.1.2
OBJECT IDENTIFIER    

ipVrrpCapabilities 1.3.6.1.4.1.562.2.4.2.161.3
OBJECT IDENTIFIER    

ipVrrpCapabilitiesBG 1.3.6.1.4.1.562.2.4.2.161.3.7
OBJECT IDENTIFIER    

ipVrrpCapabilitiesBG00 1.3.6.1.4.1.562.2.4.2.161.3.7.1
OBJECT IDENTIFIER    

ipVrrpCapabilitiesBG00A 1.3.6.1.4.1.562.2.4.2.161.3.7.1.2
OBJECT IDENTIFIER