Nortel-Magellan-Passport-IpMIB

File: Nortel-Magellan-Passport-IpMIB.mib (588324 bytes)

Imported modules

RFC-1212 RFC1155-SMI Nortel-Magellan-Passport-UsefulDefinitionsMIB
Nortel-Magellan-Passport-StandardTextualConventionsMIB Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-VirtualRouterMIB

Imported symbols

OBJECT-TYPE TimeTicks IpAddress
passportMIBs Counter32 PhysAddress
Gauge32 RowPointer DisplayString
StorageType RowStatus AreaID
InterfaceIndex RouterID Integer32
Unsigned32 AsciiString DashedHexString
NonReplicated HexString EnterpriseDateAndTime
Link AsciiStringIndex vrIndex
vrPpIndex vrPp vr

Defined Types

VrPpIpPortRowStatusEntry  
SEQUENCE    
  vrPpIpPortRowStatus RowStatus
  vrPpIpPortComponentName DisplayString
  vrPpIpPortStorageType StorageType
  vrPpIpPortIndex NonReplicated

VrPpIpPortProvEntry  
SEQUENCE    
  vrPpIpPortMaxTxUnit Unsigned32
  vrPpIpPortArpStatus INTEGER
  vrPpIpPortProxyArpStatus INTEGER
  vrPpIpPortArpNoLearn INTEGER
  vrPpIpPortSendRedirect INTEGER
  vrPpIpPortMulticastStatus INTEGER
  vrPpIpPortRelayAddress IpAddress
  vrPpIpPortRelayBroadcast INTEGER
  vrPpIpPortLinkModel INTEGER
  vrPpIpPortLanModel INTEGER
  vrPpIpPortEncap INTEGER
  vrPpIpPortIcmpMaskReply INTEGER
  vrPpIpPortDirectedBroadcast INTEGER
  vrPpIpPortAssignedQos Unsigned32
  vrPpIpPortAllowMcastMacDest INTEGER
  vrPpIpPortCosPolicyAssignment Link
  vrPpIpPortMcastDomain Unsigned32
  vrPpIpPortMcastPolicyAssignment Link

VrPpIpPortSresProvEntry  
SEQUENCE    
  vrPpIpPortSourceRouteEndStationSupport INTEGER

VrPpIpPortAdminControlEntry  
SEQUENCE    
  vrPpIpPortSnmpAdminStatus INTEGER

VrPpIpPortOperEntry  
SEQUENCE    
  vrPpIpPortMediaType INTEGER
  vrPpIpPortOperMtu Unsigned32
  vrPpIpPortOperArpStatus INTEGER
  vrPpIpPortOperMulticastStatus INTEGER
  vrPpIpPortOperEncap INTEGER
  vrPpIpPortOperCosPolicyAssignment RowPointer

VrPpIpPortRelayBcOperEntry  
SEQUENCE    
  vrPpIpPortRelayAddressCount Counter32
  vrPpIpPortRelayBcCount Counter32

VrPpIpPortStateEntry  
SEQUENCE    
  vrPpIpPortAdminState INTEGER
  vrPpIpPortOperationalState INTEGER
  vrPpIpPortUsageState INTEGER

VrPpIpPortOperStatusEntry  
SEQUENCE    
  vrPpIpPortSnmpOperStatus INTEGER

VrPpIpPortLogicalIfRowStatusEntry  
SEQUENCE    
  vrPpIpPortLogicalIfRowStatus RowStatus
  vrPpIpPortLogicalIfComponentName DisplayString
  vrPpIpPortLogicalIfStorageType StorageType
  vrPpIpPortLogicalIfAddressIndex IpAddress

VrPpIpPortLogicalIfProvEntry  
SEQUENCE    
  vrPpIpPortLogicalIfNetMask IpAddress
  vrPpIpPortLogicalIfBroadcastAddress IpAddress
  vrPpIpPortLogicalIfLinkDestinationAddress IpAddress
  vrPpIpPortLogicalIfLinkToPimSmCandidateRp Link
  vrPpIpPortLogicalIfLinkToPimSmCandidateBsr Link

VrPpIpPortLogicalIfLinkToMulStaticGpEntry  
SEQUENCE    
  vrPpIpPortLogicalIfLinkToMulStaticGpValue Link
  vrPpIpPortLogicalIfLinkToMulStaticGpRowStatus RowStatus

VrPpIpPortLogicalIfOspfIfRowStatusEntry  
SEQUENCE    
  vrPpIpPortLogicalIfOspfIfRowStatus RowStatus
  vrPpIpPortLogicalIfOspfIfComponentName DisplayString
  vrPpIpPortLogicalIfOspfIfStorageType StorageType
  vrPpIpPortLogicalIfOspfIfIndex NonReplicated

VrPpIpPortLogicalIfOspfIfProvEntry  
SEQUENCE    
  vrPpIpPortLogicalIfOspfIfAreaId AreaID
  vrPpIpPortLogicalIfOspfIfIfType INTEGER
  vrPpIpPortLogicalIfOspfIfSnmpAdminStatus INTEGER
  vrPpIpPortLogicalIfOspfIfRtrPriority Unsigned32
  vrPpIpPortLogicalIfOspfIfTransitDelay Unsigned32
  vrPpIpPortLogicalIfOspfIfRetransInterval Unsigned32
  vrPpIpPortLogicalIfOspfIfHelloInterval Unsigned32
  vrPpIpPortLogicalIfOspfIfRtrDeadInterval Unsigned32
  vrPpIpPortLogicalIfOspfIfPollInterval Unsigned32
  vrPpIpPortLogicalIfOspfIfAuthKey HexString
  vrPpIpPortLogicalIfOspfIfMulticastForwarding INTEGER

VrPpIpPortLogicalIfOspfIfOperEntry  
SEQUENCE    
  vrPpIpPortLogicalIfOspfIfState INTEGER
  vrPpIpPortLogicalIfOspfIfDesignatedRouter IpAddress
  vrPpIpPortLogicalIfOspfIfBackupDesignatedRouter IpAddress
  vrPpIpPortLogicalIfOspfIfEvents Counter32

VrPpIpPortLogicalIfOspfIfMetricEntry  
SEQUENCE    
  vrPpIpPortLogicalIfOspfIfMetric Unsigned32

VrPpIpPortLogicalIfOspfIfTOSRowStatusEntry  
SEQUENCE    
  vrPpIpPortLogicalIfOspfIfTOSRowStatus RowStatus
  vrPpIpPortLogicalIfOspfIfTOSComponentName DisplayString
  vrPpIpPortLogicalIfOspfIfTOSStorageType StorageType
  vrPpIpPortLogicalIfOspfIfTOSMetricTosIndex Integer32

VrPpIpPortLogicalIfOspfIfTOSProvEntry  
SEQUENCE    
  vrPpIpPortLogicalIfOspfIfTOSTosMetric Unsigned32

VrPpIpPortLogicalIfOspfIfNbrRowStatusEntry  
SEQUENCE    
  vrPpIpPortLogicalIfOspfIfNbrRowStatus RowStatus
  vrPpIpPortLogicalIfOspfIfNbrComponentName DisplayString
  vrPpIpPortLogicalIfOspfIfNbrStorageType StorageType
  vrPpIpPortLogicalIfOspfIfNbrAddressIndex IpAddress

VrPpIpPortLogicalIfOspfIfNbrProvEntry  
SEQUENCE    
  vrPpIpPortLogicalIfOspfIfNbrPriority Unsigned32

VrPpIpPortLogicalIfOspfIfNbrOperEntry  
SEQUENCE    
  vrPpIpPortLogicalIfOspfIfNbrRtrId RouterID
  vrPpIpPortLogicalIfOspfIfNbrOptions Unsigned32
  vrPpIpPortLogicalIfOspfIfNbrState INTEGER
  vrPpIpPortLogicalIfOspfIfNbrEvents Counter32
  vrPpIpPortLogicalIfOspfIfNbrLsRetransQlen Gauge32
  vrPpIpPortLogicalIfOspfIfNbrExchangeStatus INTEGER
  vrPpIpPortLogicalIfOspfIfNbrPermanance INTEGER

VrPpIpPortLogicalIfRipIfRowStatusEntry  
SEQUENCE    
  vrPpIpPortLogicalIfRipIfRowStatus RowStatus
  vrPpIpPortLogicalIfRipIfComponentName DisplayString
  vrPpIpPortLogicalIfRipIfStorageType StorageType
  vrPpIpPortLogicalIfRipIfIndex NonReplicated

VrPpIpPortLogicalIfRipIfProvEntry  
SEQUENCE    
  vrPpIpPortLogicalIfRipIfSnmpAdminStatus INTEGER
  vrPpIpPortLogicalIfRipIfMetric Unsigned32
  vrPpIpPortLogicalIfRipIfSilentFlag INTEGER
  vrPpIpPortLogicalIfRipIfPoisonReverseFlag INTEGER
  vrPpIpPortLogicalIfRipIfFlashUpdateFlag INTEGER
  vrPpIpPortLogicalIfRipIfNetworkRouteStatus INTEGER
  vrPpIpPortLogicalIfRipIfDefaultRouteMetric Unsigned32
  vrPpIpPortLogicalIfRipIfAcceptDefault INTEGER
  vrPpIpPortLogicalIfRipIfIfConfSend INTEGER
  vrPpIpPortLogicalIfRipIfIfConfReceive INTEGER

VrPpIpPortLogicalIfRipIfStatEntry  
SEQUENCE    
  vrPpIpPortLogicalIfRipIfIfBadPacketRcv Unsigned32
  vrPpIpPortLogicalIfRipIfIfBadRouteRcv Unsigned32
  vrPpIpPortLogicalIfRipIfIfTriggeredUpdates Unsigned32

VrPpIpPortLogicalIfRipIfNbrRowStatusEntry  
SEQUENCE    
  vrPpIpPortLogicalIfRipIfNbrRowStatus RowStatus
  vrPpIpPortLogicalIfRipIfNbrComponentName DisplayString
  vrPpIpPortLogicalIfRipIfNbrStorageType StorageType
  vrPpIpPortLogicalIfRipIfNbrIndex IpAddress

VrPpIpPortLogicalIfIgmpIfRowStatusEntry  
SEQUENCE    
  vrPpIpPortLogicalIfIgmpIfRowStatus RowStatus
  vrPpIpPortLogicalIfIgmpIfComponentName DisplayString
  vrPpIpPortLogicalIfIgmpIfStorageType StorageType
  vrPpIpPortLogicalIfIgmpIfIndex NonReplicated

VrPpIpPortLogicalIfIgmpIfProvEntry  
SEQUENCE    
  vrPpIpPortLogicalIfIgmpIfVersion INTEGER
  vrPpIpPortLogicalIfIgmpIfQueryInterval Unsigned32
  vrPpIpPortLogicalIfIgmpIfQueryMaxRespTime Unsigned32

VrPpIpPortLogicalIfIgmpIfOperEntry  
SEQUENCE    
  vrPpIpPortLogicalIfIgmpIfQuerier IpAddress
  vrPpIpPortLogicalIfIgmpIfWrongVersionQuery Counter32
  vrPpIpPortLogicalIfIgmpIfJoins Counter32
  vrPpIpPortLogicalIfIgmpIfGroups Gauge32
  vrPpIpPortLogicalIfIgmpIfQuerierExpiryTime Unsigned32

VrPpIpPortLogicalIfPimSmIfRowStatusEntry  
SEQUENCE    
  vrPpIpPortLogicalIfPimSmIfRowStatus RowStatus
  vrPpIpPortLogicalIfPimSmIfComponentName DisplayString
  vrPpIpPortLogicalIfPimSmIfStorageType StorageType
  vrPpIpPortLogicalIfPimSmIfIndex NonReplicated

VrPpIpPortLogicalIfPimSmIfProvEntry  
SEQUENCE    
  vrPpIpPortLogicalIfPimSmIfHelloInterval Unsigned32

VrPpIpPortLogicalIfPimSmIfOperEntry  
SEQUENCE    
  vrPpIpPortLogicalIfPimSmIfDesignatedRouter IpAddress

VrPpIpPortNsRowStatusEntry  
SEQUENCE    
  vrPpIpPortNsRowStatus RowStatus
  vrPpIpPortNsComponentName DisplayString
  vrPpIpPortNsStorageType StorageType
  vrPpIpPortNsIndex NonReplicated

VrPpIpPortNsProvEntry  
SEQUENCE    
  vrPpIpPortNsIncomingFilter AsciiString
  vrPpIpPortNsOutgoingFilter AsciiString

VrPpIpPortBootpPRowStatusEntry  
SEQUENCE    
  vrPpIpPortBootpPRowStatus RowStatus
  vrPpIpPortBootpPComponentName DisplayString
  vrPpIpPortBootpPStorageType StorageType
  vrPpIpPortBootpPIndex NonReplicated

VrPpIpPortBootpPProvEntry  
SEQUENCE    
  vrPpIpPortBootpPRelayForwardStatus INTEGER
  vrPpIpPortBootpPBootpLogicalInterface IpAddress

VrPpIpPortBootpPAdminControlEntry  
SEQUENCE    
  vrPpIpPortBootpPSnmpAdminStatus INTEGER

VrPpIpPortBootpPOperStatusEntry  
SEQUENCE    
  vrPpIpPortBootpPSnmpOperStatus INTEGER

VrPpIpPortBootpPStateEntry  
SEQUENCE    
  vrPpIpPortBootpPAdminState INTEGER
  vrPpIpPortBootpPOperationalState INTEGER
  vrPpIpPortBootpPUsageState INTEGER

VrPpIpPortBootpPStatsEntry  
SEQUENCE    
  vrPpIpPortBootpPInRequests Counter32
  vrPpIpPortBootpPInReplies Counter32
  vrPpIpPortBootpPOutRequests Counter32
  vrPpIpPortBootpPOutReplies Counter32
  vrPpIpPortBootpPInRequestErrors Counter32
  vrPpIpPortBootpPInReplyErrors Counter32

VrPpIpPortBootpPAddrEntry  
SEQUENCE    
  vrPpIpPortBootpPAddrValue IpAddress
  vrPpIpPortBootpPAddrRowStatus RowStatus

VrIpRowStatusEntry  
SEQUENCE    
  vrIpRowStatus RowStatus
  vrIpComponentName DisplayString
  vrIpStorageType StorageType
  vrIpIndex NonReplicated

VrIpProvEntry  
SEQUENCE    
  vrIpForwarding INTEGER
  vrIpDefaultTtl Unsigned32
  vrIpCosPolicyAssignment Link

VrIpStatsEntry  
SEQUENCE    
  vrIpInReceives Counter32
  vrIpInHdrErrors Counter32
  vrIpInAddrErrors Counter32
  vrIpForwDatagrams Counter32
  vrIpInUnknownProtos Counter32
  vrIpInDiscards Counter32
  vrIpInDelivers Counter32
  vrIpOutRequests Counter32
  vrIpOutDiscards Counter32
  vrIpOutNoRoutes Counter32
  vrIpReasmTimeOut Unsigned32
  vrIpReasmReqds Counter32
  vrIpReasmOks Counter32
  vrIpReasmFails Counter32
  vrIpFragOks Counter32
  vrIpFragFails Counter32
  vrIpFragCreates Counter32
  vrIpRoutingDiscards Counter32

VrIpAdminControlEntry  
SEQUENCE    
  vrIpSnmpAdminStatus INTEGER

VrIpStateEntry  
SEQUENCE    
  vrIpAdminState INTEGER
  vrIpOperationalState INTEGER
  vrIpUsageState INTEGER

VrIpOperStatusEntry  
SEQUENCE    
  vrIpSnmpOperStatus INTEGER

VrIpCtsEntry  
SEQUENCE    
  vrIpCtsIndex Integer32
  vrIpCtsValue Unsigned32

VrIpFwdRowStatusEntry  
SEQUENCE    
  vrIpFwdRowStatus RowStatus
  vrIpFwdComponentName DisplayString
  vrIpFwdStorageType StorageType
  vrIpFwdDestAddressIndex IpAddress
  vrIpFwdDestMaskIndex IpAddress
  vrIpFwdTypeOfServiceIndex Integer32
  vrIpFwdGatewayIndex IpAddress

VrIpFwdOperEntry  
SEQUENCE    
  vrIpFwdIfIndex InterfaceIndex
  vrIpFwdType INTEGER
  vrIpFwdProtocol INTEGER
  vrIpFwdAge Gauge32
  vrIpFwdProtocolPortName RowPointer
  vrIpFwdNextHopAs Unsigned32
  vrIpFwdMetric INTEGER

VrIpRdbRowStatusEntry  
SEQUENCE    
  vrIpRdbRowStatus RowStatus
  vrIpRdbComponentName DisplayString
  vrIpRdbStorageType StorageType
  vrIpRdbDestAddressIndex IpAddress
  vrIpRdbDestMaskIndex IpAddress
  vrIpRdbProtocolIndex INTEGER
  vrIpRdbGatewayIndex IpAddress

VrIpRdbOperEntry  
SEQUENCE    
  vrIpRdbMetric INTEGER
  vrIpRdbPreference Unsigned32
  vrIpRdbAge Gauge32

VrIpIfRowStatusEntry  
SEQUENCE    
  vrIpIfRowStatus RowStatus
  vrIpIfComponentName DisplayString
  vrIpIfStorageType StorageType
  vrIpIfInterfaceAddressIndex IpAddress

VrIpIfOperEntry  
SEQUENCE    
  vrIpIfInterfaceMask IpAddress
  vrIpIfStatus INTEGER
  vrIpIfPPName AsciiString
  vrIpIfMediaType INTEGER
  vrIpIfHardwareAddress DashedHexString
  vrIpIfMtu Unsigned32
  vrIpIfBroadcastAddress IpAddress
  vrIpIfNcHardwareAddress DashedHexString

VrIpEgpRowStatusEntry  
SEQUENCE    
  vrIpEgpRowStatus RowStatus
  vrIpEgpComponentName DisplayString
  vrIpEgpStorageType StorageType
  vrIpEgpIndex NonReplicated

VrIpEgpProvEntry  
SEQUENCE    
  vrIpEgpAsId Unsigned32
  vrIpEgpDefaultHelloInterval Unsigned32
  vrIpEgpDefaultPollInterval Unsigned32
  vrIpEgpMaxNatNets Unsigned32
  vrIpEgpMaxBufferSize Unsigned32

VrIpEgpStatsEntry  
SEQUENCE    
  vrIpEgpInMsgs Counter32
  vrIpEgpInErrorMsgs Counter32
  vrIpEgpOutErrorMsgs Counter32
  vrIpEgpInErrors Counter32
  vrIpEgpOutMsgs Counter32
  vrIpEgpOutErrors Counter32

VrIpEgpStateEntry  
SEQUENCE    
  vrIpEgpAdminState INTEGER
  vrIpEgpOperationalState INTEGER
  vrIpEgpUsageState INTEGER

VrIpEgpAdminControlEntry  
SEQUENCE    
  vrIpEgpSnmpAdminStatus INTEGER

VrIpEgpOperStatusEntry  
SEQUENCE    
  vrIpEgpSnmpOperStatus INTEGER

VrIpEgpNbrRowStatusEntry  
SEQUENCE    
  vrIpEgpNbrRowStatus RowStatus
  vrIpEgpNbrComponentName DisplayString
  vrIpEgpNbrStorageType StorageType
  vrIpEgpNbrNeighborAddressIndex IpAddress

VrIpEgpNbrProvEntry  
SEQUENCE    
  vrIpEgpNbrAsId Unsigned32
  vrIpEgpNbrMode INTEGER
  vrIpEgpNbrGenerateDefaultRoute INTEGER
  vrIpEgpNbrDefaultRouteMetric Unsigned32
  vrIpEgpNbrDefaultMetric Unsigned32
  vrIpEgpNbrHelloInterval Unsigned32
  vrIpEgpNbrPollInterval Unsigned32

VrIpEgpNbrOperEntry  
SEQUENCE    
  vrIpEgpNbrState INTEGER
  vrIpEgpNbrInMsgs Counter32
  vrIpEgpNbrInErrors Counter32
  vrIpEgpNbrOutMsgs Counter32
  vrIpEgpNbrOutErrors Counter32
  vrIpEgpNbrInErrorMsgs Counter32
  vrIpEgpNbrOutErrorMsgs Counter32
  vrIpEgpNbrStateUps Counter32
  vrIpEgpNbrStateDowns Counter32
  vrIpEgpNbrEventTrigger INTEGER

VrIpEgpImportRowStatusEntry  
SEQUENCE    
  vrIpEgpImportRowStatus RowStatus
  vrIpEgpImportComponentName DisplayString
  vrIpEgpImportStorageType StorageType
  vrIpEgpImportIndex Integer32

VrIpEgpImportProvEntry  
SEQUENCE    
  vrIpEgpImportUsageFlag INTEGER
  vrIpEgpImportImportMetric Unsigned32
  vrIpEgpImportNbrAsId Unsigned32

VrIpEgpImportNetRowStatusEntry  
SEQUENCE    
  vrIpEgpImportNetRowStatus RowStatus
  vrIpEgpImportNetComponentName DisplayString
  vrIpEgpImportNetStorageType StorageType
  vrIpEgpImportNetIndex Integer32

VrIpEgpImportNetProvEntry  
SEQUENCE    
  vrIpEgpImportNetIpAddress IpAddress

VrIpEgpExportRowStatusEntry  
SEQUENCE    
  vrIpEgpExportRowStatus RowStatus
  vrIpEgpExportComponentName DisplayString
  vrIpEgpExportStorageType StorageType
  vrIpEgpExportIndex Integer32

VrIpEgpExportProvEntry  
SEQUENCE    
  vrIpEgpExportAdvertiseStatus INTEGER
  vrIpEgpExportExportMetric Unsigned32
  vrIpEgpExportProtocol INTEGER
  vrIpEgpExportRipInterface IpAddress
  vrIpEgpExportRipNeighbor IpAddress
  vrIpEgpExportInEgpAsId Unsigned32
  vrIpEgpExportOspfTag Unsigned32
  vrIpEgpExportOutAutonomousSystem Unsigned32

VrIpEgpExportNetRowStatusEntry  
SEQUENCE    
  vrIpEgpExportNetRowStatus RowStatus
  vrIpEgpExportNetComponentName DisplayString
  vrIpEgpExportNetStorageType StorageType
  vrIpEgpExportNetIndex Integer32

VrIpEgpExportNetProvEntry  
SEQUENCE    
  vrIpEgpExportNetIpAddress IpAddress

VrIpOspfRowStatusEntry  
SEQUENCE    
  vrIpOspfRowStatus RowStatus
  vrIpOspfComponentName DisplayString
  vrIpOspfStorageType StorageType
  vrIpOspfIndex NonReplicated

VrIpOspfProvEntry  
SEQUENCE    
  vrIpOspfRouterId RouterID
  vrIpOspfSnmpAdminStatus INTEGER
  vrIpOspfAsBdrRtrStatus INTEGER
  vrIpOspfTosSupport INTEGER
  vrIpOspfExtLsdbLimit INTEGER
  vrIpOspfMulticastForward Unsigned32
  vrIpOspfMigrateRip INTEGER
  vrIpOspfGenerateDefaultRouteMetric INTEGER

VrIpOspfOperEntry  
SEQUENCE    
  vrIpOspfVersionNumber Unsigned32
  vrIpOspfAreaBdrRtrStatus INTEGER
  vrIpOspfExternLsaCount Gauge32
  vrIpOspfExternLsaChecksumSum Unsigned32
  vrIpOspfOriginateNewLsas Counter32
  vrIpOspfRxNewLsas Counter32

VrIpOspfStateEntry  
SEQUENCE    
  vrIpOspfAdminState INTEGER
  vrIpOspfOperationalState INTEGER
  vrIpOspfUsageState INTEGER

VrIpOspfOperStatusEntry  
SEQUENCE    
  vrIpOspfSnmpOperStatus INTEGER

VrIpOspfAreaRowStatusEntry  
SEQUENCE    
  vrIpOspfAreaRowStatus RowStatus
  vrIpOspfAreaComponentName DisplayString
  vrIpOspfAreaStorageType StorageType
  vrIpOspfAreaAreaIdIndex IpAddress

VrIpOspfAreaProvEntry  
SEQUENCE    
  vrIpOspfAreaAuthType INTEGER
  vrIpOspfAreaImportAsExtern INTEGER
  vrIpOspfAreaAreaSummary INTEGER

VrIpOspfAreaOperEntry  
SEQUENCE    
  vrIpOspfAreaSpfRuns Counter32
  vrIpOspfAreaAreaBdrRtrCount Gauge32
  vrIpOspfAreaAsBdrRtrCount Gauge32
  vrIpOspfAreaLsaCount Gauge32
  vrIpOspfAreaAreaLsaCksumSum Unsigned32

VrIpOspfStubRowStatusEntry  
SEQUENCE    
  vrIpOspfStubRowStatus RowStatus
  vrIpOspfStubComponentName DisplayString
  vrIpOspfStubStorageType StorageType
  vrIpOspfStubAreaIdIndex IpAddress
  vrIpOspfStubTosIndex Integer32

VrIpOspfStubProvEntry  
SEQUENCE    
  vrIpOspfStubMetric Unsigned32
  vrIpOspfStubMetricType INTEGER
  vrIpOspfStubAdvertiseDefault INTEGER

VrIpOspfAggregateRowStatusEntry  
SEQUENCE    
  vrIpOspfAggregateRowStatus RowStatus
  vrIpOspfAggregateComponentName DisplayString
  vrIpOspfAggregateStorageType StorageType
  vrIpOspfAggregateAreaIdIndex IpAddress
  vrIpOspfAggregateLsdbTypeIndex INTEGER
  vrIpOspfAggregateAggregateNetIndex IpAddress
  vrIpOspfAggregateAggregateMaskIndex IpAddress

VrIpOspfAggregateProvEntry  
SEQUENCE    
  vrIpOspfAggregateEffect INTEGER

VrIpOspfHostRowStatusEntry  
SEQUENCE    
  vrIpOspfHostRowStatus RowStatus
  vrIpOspfHostComponentName DisplayString
  vrIpOspfHostStorageType StorageType
  vrIpOspfHostAddressIndex IpAddress
  vrIpOspfHostTosIndex Integer32

VrIpOspfHostProvEntry  
SEQUENCE    
  vrIpOspfHostAreaId AreaID
  vrIpOspfHostMetric Unsigned32

VrIpOspfVirtIfRowStatusEntry  
SEQUENCE    
  vrIpOspfVirtIfRowStatus RowStatus
  vrIpOspfVirtIfComponentName DisplayString
  vrIpOspfVirtIfStorageType StorageType
  vrIpOspfVirtIfAreaIdIndex IpAddress
  vrIpOspfVirtIfNbrRouterIdIndex IpAddress

VrIpOspfVirtIfProvEntry  
SEQUENCE    
  vrIpOspfVirtIfTransitDelay Unsigned32
  vrIpOspfVirtIfRetransInterval Unsigned32
  vrIpOspfVirtIfHelloInterval Unsigned32
  vrIpOspfVirtIfRtrDeadInterval Unsigned32
  vrIpOspfVirtIfAuthKey HexString

VrIpOspfVirtIfOperEntry  
SEQUENCE    
  vrIpOspfVirtIfState INTEGER
  vrIpOspfVirtIfEvents Counter32

VrIpOspfExportRowStatusEntry  
SEQUENCE    
  vrIpOspfExportRowStatus RowStatus
  vrIpOspfExportComponentName DisplayString
  vrIpOspfExportStorageType StorageType
  vrIpOspfExportIndex Integer32

VrIpOspfExportProvEntry  
SEQUENCE    
  vrIpOspfExportAdvertiseStatus INTEGER
  vrIpOspfExportMetric INTEGER
  vrIpOspfExportProtocol INTEGER
  vrIpOspfExportRipInterface IpAddress
  vrIpOspfExportRipNeighbor IpAddress
  vrIpOspfExportEgpAsId Unsigned32
  vrIpOspfExportTag Unsigned32
  vrIpOspfExportExtLsaMetricType INTEGER
  vrIpOspfExportBgpAsId Unsigned32
  vrIpOspfExportBgpPeerIp IpAddress

VrIpOspfExportNetListRowStatusEntry  
SEQUENCE    
  vrIpOspfExportNetListRowStatus RowStatus
  vrIpOspfExportNetListComponentName DisplayString
  vrIpOspfExportNetListStorageType StorageType
  vrIpOspfExportNetListIndex Integer32

VrIpOspfExportNetListProvEntry  
SEQUENCE    
  vrIpOspfExportNetListIpAddress IpAddress
  vrIpOspfExportNetListIpMask IpAddress

VrIpOspfVirtNbrRowStatusEntry  
SEQUENCE    
  vrIpOspfVirtNbrRowStatus RowStatus
  vrIpOspfVirtNbrComponentName DisplayString
  vrIpOspfVirtNbrStorageType StorageType
  vrIpOspfVirtNbrAreaIdIndex IpAddress
  vrIpOspfVirtNbrNbrRouterIdIndex IpAddress

VrIpOspfVirtNbrOperEntry  
SEQUENCE    
  vrIpOspfVirtNbrNbrIpAddress IpAddress
  vrIpOspfVirtNbrOptions Unsigned32
  vrIpOspfVirtNbrState INTEGER
  vrIpOspfVirtNbrEvents Counter32
  vrIpOspfVirtNbrLsRetransQlen Gauge32
  vrIpOspfVirtNbrExchangeStatus INTEGER

VrIpOspfNbrRowStatusEntry  
SEQUENCE    
  vrIpOspfNbrRowStatus RowStatus
  vrIpOspfNbrComponentName DisplayString
  vrIpOspfNbrStorageType StorageType
  vrIpOspfNbrAddressIndex IpAddress
  vrIpOspfNbrAddressLessIndex Integer32

VrIpOspfNbrOperEntry  
SEQUENCE    
  vrIpOspfNbrRtrId IpAddress
  vrIpOspfNbrOptions Unsigned32
  vrIpOspfNbrPriority Unsigned32
  vrIpOspfNbrState INTEGER
  vrIpOspfNbrEvents Counter32
  vrIpOspfNbrLsRetransQlen Gauge32
  vrIpOspfNbrNbmaNbrStatus INTEGER
  vrIpOspfNbrExchangeStatus INTEGER
  vrIpOspfNbrPermanence INTEGER

VrIpOspfLsdbRowStatusEntry  
SEQUENCE    
  vrIpOspfLsdbRowStatus RowStatus
  vrIpOspfLsdbComponentName DisplayString
  vrIpOspfLsdbStorageType StorageType
  vrIpOspfLsdbAreaIdIndex IpAddress
  vrIpOspfLsdbLsdbTypeIndex Integer32
  vrIpOspfLsdbLsIdIndex IpAddress
  vrIpOspfLsdbRouterIdIndex IpAddress

VrIpOspfLsdbOperEntry  
SEQUENCE    
  vrIpOspfLsdbSequence Unsigned32
  vrIpOspfLsdbAge Gauge32
  vrIpOspfLsdbChecksum Unsigned32
  vrIpOspfLsdbAdvertisement HexString

VrIpOspfExtLsdbRowStatusEntry  
SEQUENCE    
  vrIpOspfExtLsdbRowStatus RowStatus
  vrIpOspfExtLsdbComponentName DisplayString
  vrIpOspfExtLsdbStorageType StorageType
  vrIpOspfExtLsdbLsdbTypeIndex Integer32
  vrIpOspfExtLsdbLsIdIndex IpAddress
  vrIpOspfExtLsdbRouterIdIndex IpAddress

VrIpOspfExtLsdbOperEntry  
SEQUENCE    
  vrIpOspfExtLsdbSequence Unsigned32
  vrIpOspfExtLsdbAge Gauge32
  vrIpOspfExtLsdbChecksum Unsigned32
  vrIpOspfExtLsdbAdvertisement HexString

VrIpRipRowStatusEntry  
SEQUENCE    
  vrIpRipRowStatus RowStatus
  vrIpRipComponentName DisplayString
  vrIpRipStorageType StorageType
  vrIpRipIndex NonReplicated

VrIpRipProvEntry  
SEQUENCE    
  vrIpRipMigrateRip INTEGER
  vrIpRipRfc1058MetricUsage INTEGER
  vrIpRipGenerateDiscardRoute INTEGER
  vrIpRipRipUpdate INTEGER
  vrIpRipRipTimeout INTEGER
  vrIpRipGarbageCollectTimer INTEGER

VrIpRipStateEntry  
SEQUENCE    
  vrIpRipAdminState INTEGER
  vrIpRipOperationalState INTEGER
  vrIpRipUsageState INTEGER

VrIpRipAdminControlEntry  
SEQUENCE    
  vrIpRipSnmpAdminStatus INTEGER

VrIpRipOperStatusEntry  
SEQUENCE    
  vrIpRipSnmpOperStatus INTEGER

VrIpRipOperEntry  
SEQUENCE    
  vrIpRipRouteChangesMade Counter32
  vrIpRipQueryResponses Counter32

VrIpRipImportRowStatusEntry  
SEQUENCE    
  vrIpRipImportRowStatus RowStatus
  vrIpRipImportComponentName DisplayString
  vrIpRipImportStorageType StorageType
  vrIpRipImportIndex Integer32

VrIpRipImportProvEntry  
SEQUENCE    
  vrIpRipImportUsageFlag INTEGER
  vrIpRipImportImportMetric Unsigned32
  vrIpRipImportNeighbor IpAddress
  vrIpRipImportInterface IpAddress

VrIpRipImportNetRowStatusEntry  
SEQUENCE    
  vrIpRipImportNetRowStatus RowStatus
  vrIpRipImportNetComponentName DisplayString
  vrIpRipImportNetStorageType StorageType
  vrIpRipImportNetIndex Integer32

VrIpRipImportNetProvEntry  
SEQUENCE    
  vrIpRipImportNetIpAddress IpAddress
  vrIpRipImportNetIpMask IpAddress

VrIpRipExportRowStatusEntry  
SEQUENCE    
  vrIpRipExportRowStatus RowStatus
  vrIpRipExportComponentName DisplayString
  vrIpRipExportStorageType StorageType
  vrIpRipExportIndex Integer32

VrIpRipExportProvEntry  
SEQUENCE    
  vrIpRipExportAdvertiseStatus INTEGER
  vrIpRipExportExportMetric Unsigned32
  vrIpRipExportProtocol INTEGER
  vrIpRipExportRipInterface IpAddress
  vrIpRipExportEgpAsId Unsigned32
  vrIpRipExportOspfTag Unsigned32
  vrIpRipExportOutInterface IpAddress
  vrIpRipExportBgpAsId Unsigned32

VrIpRipExportNetRowStatusEntry  
SEQUENCE    
  vrIpRipExportNetRowStatus RowStatus
  vrIpRipExportNetComponentName DisplayString
  vrIpRipExportNetStorageType StorageType
  vrIpRipExportNetIndex Integer32

VrIpRipExportNetProvEntry  
SEQUENCE    
  vrIpRipExportNetIpAddress IpAddress
  vrIpRipExportNetIpMask IpAddress

VrIpStaticRowStatusEntry  
SEQUENCE    
  vrIpStaticRowStatus RowStatus
  vrIpStaticComponentName DisplayString
  vrIpStaticStorageType StorageType
  vrIpStaticIndex NonReplicated

VrIpStaticStateEntry  
SEQUENCE    
  vrIpStaticAdminState INTEGER
  vrIpStaticOperationalState INTEGER
  vrIpStaticUsageState INTEGER

VrIpStaticRouteRowStatusEntry  
SEQUENCE    
  vrIpStaticRouteRowStatus RowStatus
  vrIpStaticRouteComponentName DisplayString
  vrIpStaticRouteStorageType StorageType
  vrIpStaticRouteDestAddressIndex IpAddress
  vrIpStaticRouteDestMaskIndex IpAddress
  vrIpStaticRouteTypeOfServiceIndex Integer32

VrIpStaticRouteProvEntry  
SEQUENCE    
  vrIpStaticRoutePreferredOver INTEGER

VrIpStaticRouteNhRowStatusEntry  
SEQUENCE    
  vrIpStaticRouteNhRowStatus RowStatus
  vrIpStaticRouteNhComponentName DisplayString
  vrIpStaticRouteNhStorageType StorageType
  vrIpStaticRouteNhIndex IpAddress

VrIpStaticRouteNhProvEntry  
SEQUENCE    
  vrIpStaticRouteNhMetric INTEGER

VrIpStaticDiscardRowStatusEntry  
SEQUENCE    
  vrIpStaticDiscardRowStatus RowStatus
  vrIpStaticDiscardComponentName DisplayString
  vrIpStaticDiscardStorageType StorageType
  vrIpStaticDiscardDestAddressIndex IpAddress
  vrIpStaticDiscardDestMaskIndex IpAddress

VrIpNsRowStatusEntry  
SEQUENCE    
  vrIpNsRowStatus RowStatus
  vrIpNsComponentName DisplayString
  vrIpNsStorageType StorageType
  vrIpNsIndex NonReplicated

VrIpNsProvEntry  
SEQUENCE    
  vrIpNsFirstFilter AsciiString
  vrIpNsLocalInFilter AsciiString
  vrIpNsLocalOutFilter AsciiString
  vrIpNsLastFilter AsciiString

VrIpNsApplyRowStatusEntry  
SEQUENCE    
  vrIpNsApplyRowStatus RowStatus
  vrIpNsApplyComponentName DisplayString
  vrIpNsApplyStorageType StorageType
  vrIpNsApplyIndex Integer32

VrIpNsApplyProvisionedEntry  
SEQUENCE    
  vrIpNsApplyFilter AsciiString
  vrIpNsApplyIpAddress1 IpAddress
  vrIpNsApplyIpMask1 IpAddress
  vrIpNsApplyIpAddress2 IpAddress
  vrIpNsApplyIpMask2 IpAddress
  vrIpNsApplyDirection INTEGER

VrIpArpRowStatusEntry  
SEQUENCE    
  vrIpArpRowStatus RowStatus
  vrIpArpComponentName DisplayString
  vrIpArpStorageType StorageType
  vrIpArpIndex NonReplicated

VrIpArpProvEntry  
SEQUENCE    
  vrIpArpAutoRefresh INTEGER
  vrIpArpAutoRefreshTimeout Unsigned32

VrIpArpHostRowStatusEntry  
SEQUENCE    
  vrIpArpHostRowStatus RowStatus
  vrIpArpHostComponentName DisplayString
  vrIpArpHostStorageType StorageType
  vrIpArpHostHostAddressIndex IpAddress

VrIpArpHostProvEntry  
SEQUENCE    
  vrIpArpHostPhysAddress PhysAddress
  vrIpArpHostMaxTxUnit Unsigned32
  vrIpArpHostPermanentVirtualCircuitNumber Unsigned32
  vrIpArpHostEncap INTEGER

VrIpArpHostOperEntry  
SEQUENCE    
  vrIpArpHostOperMaxTxUnit Unsigned32
  vrIpArpHostOperEncap INTEGER

VrIpArpDynHostRowStatusEntry  
SEQUENCE    
  vrIpArpDynHostRowStatus RowStatus
  vrIpArpDynHostComponentName DisplayString
  vrIpArpDynHostStorageType StorageType
  vrIpArpDynHostHostAddressIndex IpAddress
  vrIpArpDynHostCosIndex INTEGER

VrIpArpDynHostOperEntry  
SEQUENCE    
  vrIpArpDynHostPhysAddress PhysAddress
  vrIpArpDynHostMaxTxUnit Unsigned32
  vrIpArpDynHostEncapsulationType INTEGER
  vrIpArpDynHostPermanentVirtualCircuitNumber Unsigned32
  vrIpArpDynHostIfIndex InterfaceIndex
  vrIpArpDynHostType INTEGER
  vrIpArpDynHostNcPhysAddress PhysAddress

VrIpIcmpRowStatusEntry  
SEQUENCE    
  vrIpIcmpRowStatus RowStatus
  vrIpIcmpComponentName DisplayString
  vrIpIcmpStorageType StorageType
  vrIpIcmpIndex NonReplicated

VrIpIcmpProvEntry  
SEQUENCE    
  vrIpIcmpSendRedirect INTEGER
  vrIpIcmpSendHostUnreachable INTEGER

VrIpIcmpStatsEntry  
SEQUENCE    
  vrIpIcmpInMsgs Counter32
  vrIpIcmpInErrors Counter32
  vrIpIcmpInDestUnreachs Counter32
  vrIpIcmpInTimeExcds Counter32
  vrIpIcmpInParmProbs Counter32
  vrIpIcmpInSrcQuenchs Counter32
  vrIpIcmpInRedirects Counter32
  vrIpIcmpInEchos Counter32
  vrIpIcmpInEchoReps Counter32
  vrIpIcmpInTimestamps Counter32
  vrIpIcmpInTimestampReps Counter32
  vrIpIcmpInAddrMasks Counter32
  vrIpIcmpInAddrMaskReps Counter32
  vrIpIcmpOutMsgs Counter32
  vrIpIcmpOutErrors Counter32
  vrIpIcmpOutDestUnreachs Counter32
  vrIpIcmpOutTimeExcds Counter32
  vrIpIcmpOutParmProbs Counter32
  vrIpIcmpOutSrcQuenchs Counter32
  vrIpIcmpOutRedirects Counter32
  vrIpIcmpOutEchos Counter32
  vrIpIcmpOutEchoReps Counter32
  vrIpIcmpOutTimestamps Counter32
  vrIpIcmpOutTimestampReps Counter32
  vrIpIcmpOutAddrMasks Counter32
  vrIpIcmpOutAddrMaskReps Counter32
  vrIpIcmpInRtrAdvs Counter32
  vrIpIcmpInRtrSolicits Counter32
  vrIpIcmpOutRtrAdvs Counter32
  vrIpIcmpOutRtrSolicits Counter32

VrIpRelayBCRowStatusEntry  
SEQUENCE    
  vrIpRelayBCRowStatus RowStatus
  vrIpRelayBCComponentName DisplayString
  vrIpRelayBCStorageType StorageType
  vrIpRelayBCIndex NonReplicated

VrIpRelayBCProvEntry  
SEQUENCE    
  vrIpRelayBCRelayStatus INTEGER
  vrIpRelayBCRelayNdStatus INTEGER

VrIpRelayBCOperEntry  
SEQUENCE    
  vrIpRelayBCRelayNdCount Counter32

VrIpRelayBCPortRowStatusEntry  
SEQUENCE    
  vrIpRelayBCPortRowStatus RowStatus
  vrIpRelayBCPortComponentName DisplayString
  vrIpRelayBCPortStorageType StorageType
  vrIpRelayBCPortPortNumIndex Integer32

VrIpRelayBCPortOperEntry  
SEQUENCE    
  vrIpRelayBCPortRelayBcUdpCount Counter32

VrIpUdpRowStatusEntry  
SEQUENCE    
  vrIpUdpRowStatus RowStatus
  vrIpUdpComponentName DisplayString
  vrIpUdpStorageType StorageType
  vrIpUdpIndex NonReplicated

VrIpUdpStatsEntry  
SEQUENCE    
  vrIpUdpInDatagrams Counter32
  vrIpUdpNoPorts Counter32
  vrIpUdpInErrors Counter32
  vrIpUdpOutDatagrams Counter32

VrIpUdpListenEntryRowStatusEntry  
SEQUENCE    
  vrIpUdpListenEntryRowStatus RowStatus
  vrIpUdpListenEntryComponentName DisplayString
  vrIpUdpListenEntryStorageType StorageType
  vrIpUdpListenEntryLocalAddressIndex IpAddress
  vrIpUdpListenEntryLocalPortIndex Integer32

VrIpTcpRowStatusEntry  
SEQUENCE    
  vrIpTcpRowStatus RowStatus
  vrIpTcpComponentName DisplayString
  vrIpTcpStorageType StorageType
  vrIpTcpIndex NonReplicated

VrIpTcpStatsEntry  
SEQUENCE    
  vrIpTcpRToAlgorithm INTEGER
  vrIpTcpRToMin Unsigned32
  vrIpTcpRToMax Unsigned32
  vrIpTcpMaxConn INTEGER
  vrIpTcpActiveOpens Counter32
  vrIpTcpPassiveOpens Counter32
  vrIpTcpAttemptFails Counter32
  vrIpTcpEstabResets Counter32
  vrIpTcpCurrEstab Gauge32
  vrIpTcpInSegs Counter32
  vrIpTcpOutSegs Counter32
  vrIpTcpRetransSegs Counter32
  vrIpTcpInErrs Counter32
  vrIpTcpOutRsts Counter32

VrIpTcpTcpEntryRowStatusEntry  
SEQUENCE    
  vrIpTcpTcpEntryRowStatus RowStatus
  vrIpTcpTcpEntryComponentName DisplayString
  vrIpTcpTcpEntryStorageType StorageType
  vrIpTcpTcpEntryLocalAddressIndex IpAddress
  vrIpTcpTcpEntryLocalPortIndex Integer32
  vrIpTcpTcpEntryRemoteAddressIndex IpAddress
  vrIpTcpTcpEntryRemotePortIndex Integer32

VrIpTcpTcpEntryOperEntry  
SEQUENCE    
  vrIpTcpTcpEntryState INTEGER

VrIpBootpRowStatusEntry  
SEQUENCE    
  vrIpBootpRowStatus RowStatus
  vrIpBootpComponentName DisplayString
  vrIpBootpStorageType StorageType
  vrIpBootpIndex NonReplicated

VrIpBootpAdminControlEntry  
SEQUENCE    
  vrIpBootpSnmpAdminStatus INTEGER

VrIpBootpProvEntry  
SEQUENCE    
  vrIpBootpHopDiscardThreshold Unsigned32

VrIpBootpStateEntry  
SEQUENCE    
  vrIpBootpAdminState INTEGER
  vrIpBootpOperationalState INTEGER
  vrIpBootpUsageState INTEGER

VrIpBootpOperStatusEntry  
SEQUENCE    
  vrIpBootpSnmpOperStatus INTEGER

VrIpBootpPpERowStatusEntry  
SEQUENCE    
  vrIpBootpPpERowStatus RowStatus
  vrIpBootpPpEComponentName DisplayString
  vrIpBootpPpEStorageType StorageType
  vrIpBootpPpEIndex AsciiStringIndex

VrIpBootpPpEOperEntry  
SEQUENCE    
  vrIpBootpPpEStatus INTEGER

VrIpBootpPpEStatsEntry  
SEQUENCE    
  vrIpBootpPpEInRequests Counter32
  vrIpBootpPpEInReplies Counter32
  vrIpBootpPpEOutRequests Counter32
  vrIpBootpPpEOutReplies Counter32
  vrIpBootpPpEInRequestErrors Counter32
  vrIpBootpPpEInReplyErrors Counter32

VrIpCacheRowStatusEntry  
SEQUENCE    
  vrIpCacheRowStatus RowStatus
  vrIpCacheComponentName DisplayString
  vrIpCacheStorageType StorageType
  vrIpCacheIndex Integer32

VrIpCacheStateEntry  
SEQUENCE    
  vrIpCacheAdminState INTEGER
  vrIpCacheOperationalState INTEGER
  vrIpCacheUsageState INTEGER

VrIpCacheOperEntry  
SEQUENCE    
  vrIpCacheEntriesFree Unsigned32
  vrIpCacheTotalLookups Unsigned32
  vrIpCacheLookupMisses Counter32
  vrIpCacheCacheTableMaxEntries Unsigned32

VrIpTunnelRowStatusEntry  
SEQUENCE    
  vrIpTunnelRowStatus RowStatus
  vrIpTunnelComponentName DisplayString
  vrIpTunnelStorageType StorageType
  vrIpTunnelIndex NonReplicated

VrIpTunnelStateEntry  
SEQUENCE    
  vrIpTunnelAdminState INTEGER
  vrIpTunnelOperationalState INTEGER
  vrIpTunnelUsageState INTEGER

VrIpTunnelSepRowStatusEntry  
SEQUENCE    
  vrIpTunnelSepRowStatus RowStatus
  vrIpTunnelSepComponentName DisplayString
  vrIpTunnelSepStorageType StorageType
  vrIpTunnelSepIndex Integer32

VrIpTunnelSepIfEntryEntry  
SEQUENCE    
  vrIpTunnelSepIfAdminStatus INTEGER
  vrIpTunnelSepIfIndex InterfaceIndex

VrIpTunnelSepMpEntry  
SEQUENCE    
  vrIpTunnelSepLinkToProtocolPort Link

VrIpTunnelSepProvEntry  
SEQUENCE    
  vrIpTunnelSepEncapType INTEGER
  vrIpTunnelSepSourceAddress IpAddress
  vrIpTunnelSepDestinationAddress IpAddress

VrIpTunnelSepOperEntry  
SEQUENCE    
  vrIpTunnelSepPathMtu Unsigned32

VrIpMcastRowStatusEntry  
SEQUENCE    
  vrIpMcastRowStatus RowStatus
  vrIpMcastComponentName DisplayString
  vrIpMcastStorageType StorageType
  vrIpMcastIndex NonReplicated

VrIpMcastAdminControlEntry  
SEQUENCE    
  vrIpMcastSnmpAdminStatus INTEGER

VrIpMcastStateEntry  
SEQUENCE    
  vrIpMcastAdminState INTEGER
  vrIpMcastOperationalState INTEGER
  vrIpMcastUsageState INTEGER

VrIpMcastOperStatusEntry  
SEQUENCE    
  vrIpMcastSnmpOperStatus INTEGER

VrIpMcastCtsEntry  
SEQUENCE    
  vrIpMcastCtsIndex Integer32
  vrIpMcastCtsValue Unsigned32

VrIpMcastIgmpRowStatusEntry  
SEQUENCE    
  vrIpMcastIgmpRowStatus RowStatus
  vrIpMcastIgmpComponentName DisplayString
  vrIpMcastIgmpStorageType StorageType
  vrIpMcastIgmpIndex NonReplicated

VrIpMcastIgmpAdminControlEntry  
SEQUENCE    
  vrIpMcastIgmpSnmpAdminStatus INTEGER

VrIpMcastIgmpStateEntry  
SEQUENCE    
  vrIpMcastIgmpAdminState INTEGER
  vrIpMcastIgmpOperationalState INTEGER
  vrIpMcastIgmpUsageState INTEGER

VrIpMcastIgmpOperStatusEntry  
SEQUENCE    
  vrIpMcastIgmpSnmpOperStatus INTEGER

VrIpMcastIgmpGcRowStatusEntry  
SEQUENCE    
  vrIpMcastIgmpGcRowStatus RowStatus
  vrIpMcastIgmpGcComponentName DisplayString
  vrIpMcastIgmpGcStorageType StorageType
  vrIpMcastIgmpGcGAddrIndex IpAddress
  vrIpMcastIgmpGcDomainIndex Integer32
  vrIpMcastIgmpGcProtocolportStringIndex AsciiStringIndex

VrIpMcastIgmpGcOperEntry  
SEQUENCE    
  vrIpMcastIgmpGcUpTime EnterpriseDateAndTime
  vrIpMcastIgmpGcExpiryTime EnterpriseDateAndTime
  vrIpMcastIgmpGcLastReporter IpAddress
  vrIpMcastIgmpGcVersion1HostTimer Unsigned32

VrIpMcastStaticRowStatusEntry  
SEQUENCE    
  vrIpMcastStaticRowStatus RowStatus
  vrIpMcastStaticComponentName DisplayString
  vrIpMcastStaticStorageType StorageType
  vrIpMcastStaticIndex NonReplicated

VrIpMcastStaticStateEntry  
SEQUENCE    
  vrIpMcastStaticAdminState INTEGER
  vrIpMcastStaticOperationalState INTEGER
  vrIpMcastStaticUsageState INTEGER

VrIpMcastStaticRouteRowStatusEntry  
SEQUENCE    
  vrIpMcastStaticRouteRowStatus RowStatus
  vrIpMcastStaticRouteComponentName DisplayString
  vrIpMcastStaticRouteStorageType StorageType
  vrIpMcastStaticRouteGAddrIndex IpAddress
  vrIpMcastStaticRouteDomainIndex Integer32

VrIpMcastStaticRouteOifsEntry  
SEQUENCE    
  vrIpMcastStaticRouteOifsValue Link
  vrIpMcastStaticRouteOifsRowStatus RowStatus

VrIpMcastPgRowStatusEntry  
SEQUENCE    
  vrIpMcastPgRowStatus RowStatus
  vrIpMcastPgComponentName DisplayString
  vrIpMcastPgStorageType StorageType
  vrIpMcastPgIndex AsciiStringIndex

VrIpMcastPgProvEntry  
SEQUENCE    
  vrIpMcastPgAction INTEGER

VrIpMcastPgLinkToPolicyUserEntry  
SEQUENCE    
  vrIpMcastPgLinkToPolicyUserValue Link
  vrIpMcastPgLinkToPolicyUserRowStatus RowStatus

VrIpMcastPgGrpRowStatusEntry  
SEQUENCE    
  vrIpMcastPgGrpRowStatus RowStatus
  vrIpMcastPgGrpComponentName DisplayString
  vrIpMcastPgGrpStorageType StorageType
  vrIpMcastPgGrpGAddrIndex IpAddress
  vrIpMcastPgGrpGMaskIndex IpAddress

VrIpMcastDomainRowStatusEntry  
SEQUENCE    
  vrIpMcastDomainRowStatus RowStatus
  vrIpMcastDomainComponentName DisplayString
  vrIpMcastDomainStorageType StorageType
  vrIpMcastDomainIndex Integer32

VrIpMcastDomainOperEntry  
SEQUENCE    
  vrIpMcastDomainProtocolActive INTEGER

VrIpMcastFwdRowStatusEntry  
SEQUENCE    
  vrIpMcastFwdRowStatus RowStatus
  vrIpMcastFwdComponentName DisplayString
  vrIpMcastFwdStorageType StorageType
  vrIpMcastFwdGAddrIndex IpAddress
  vrIpMcastFwdDomainIndex Integer32
  vrIpMcastFwdSrcAddrIndex IpAddress
  vrIpMcastFwdSrcMaskIndex IpAddress

VrIpMcastFwdOperEntry  
SEQUENCE    
  vrIpMcastFwdAge Unsigned32
  vrIpMcastFwdInProtocolPortName RowPointer
  vrIpMcastFwdProtocol INTEGER
  vrIpMcastFwdReversePathForwardingNeighbor IpAddress
  vrIpMcastFwdFlags AsciiString

VrIpMcastFwdOifRowStatusEntry  
SEQUENCE    
  vrIpMcastFwdOifRowStatus RowStatus
  vrIpMcastFwdOifComponentName DisplayString
  vrIpMcastFwdOifStorageType StorageType
  vrIpMcastFwdOifOutIfAddressIndex IpAddress
  vrIpMcastFwdOifConnectionIndex Integer32

VrIpMcastFwdOifOperEntry  
SEQUENCE    
  vrIpMcastFwdOifIfIndex InterfaceIndex
  vrIpMcastFwdOifProtocol INTEGER
  vrIpMcastFwdOifAge Unsigned32
  vrIpMcastFwdOifOutProtocolPortName RowPointer

VrIpMcastCacheStatsRowStatusEntry  
SEQUENCE    
  vrIpMcastCacheStatsRowStatus RowStatus
  vrIpMcastCacheStatsComponentName DisplayString
  vrIpMcastCacheStatsStorageType StorageType
  vrIpMcastCacheStatsIndex Integer32

VrIpMcastCacheStatsStateEntry  
SEQUENCE    
  vrIpMcastCacheStatsAdminState INTEGER
  vrIpMcastCacheStatsOperationalState INTEGER
  vrIpMcastCacheStatsUsageState INTEGER

VrIpMcastCacheStatsOperEntry  
SEQUENCE    
  vrIpMcastCacheStatsEntriesFree Unsigned32
  vrIpMcastCacheStatsTotalLookups Unsigned32
  vrIpMcastCacheStatsLookupMisses Counter32
  vrIpMcastCacheStatsCacheTableMaxEntries Unsigned32

VrIpMcastPimSmRowStatusEntry  
SEQUENCE    
  vrIpMcastPimSmRowStatus RowStatus
  vrIpMcastPimSmComponentName DisplayString
  vrIpMcastPimSmStorageType StorageType
  vrIpMcastPimSmIndex NonReplicated

VrIpMcastPimSmAdminControlEntry  
SEQUENCE    
  vrIpMcastPimSmSnmpAdminStatus INTEGER

VrIpMcastPimSmStateEntry  
SEQUENCE    
  vrIpMcastPimSmAdminState INTEGER
  vrIpMcastPimSmOperationalState INTEGER
  vrIpMcastPimSmUsageState INTEGER

VrIpMcastPimSmOperStatusEntry  
SEQUENCE    
  vrIpMcastPimSmSnmpOperStatus INTEGER

VrIpMcastPimSmDomainRowStatusEntry  
SEQUENCE    
  vrIpMcastPimSmDomainRowStatus RowStatus
  vrIpMcastPimSmDomainComponentName DisplayString
  vrIpMcastPimSmDomainStorageType StorageType
  vrIpMcastPimSmDomainIndex Integer32

VrIpMcastPimSmDomainProvEntry  
SEQUENCE    
  vrIpMcastPimSmDomainJoinPruneInterval Unsigned32
  vrIpMcastPimSmDomainSptJoinThreshold Unsigned32

VrIpMcastPimSmDomainOperEntry  
SEQUENCE    
  vrIpMcastPimSmDomainBsrAddress IpAddress
  vrIpMcastPimSmDomainBsrExpiryTimer TimeTicks

VrIpMcastPimSmDomainStatsEntry  
SEQUENCE    
  vrIpMcastPimSmDomainTxBsrMsg Counter32
  vrIpMcastPimSmDomainRxBsrMsg Counter32
  vrIpMcastPimSmDomainTxCRpAdvMsg Counter32
  vrIpMcastPimSmDomainRxCRpAdvMsg Counter32
  vrIpMcastPimSmDomainTxHelloMsg Counter32
  vrIpMcastPimSmDomainRxHelloMsg Counter32
  vrIpMcastPimSmDomainTxRegisterMsg Counter32
  vrIpMcastPimSmDomainRxRegisterMsg Counter32
  vrIpMcastPimSmDomainTxRegisterStopMsg Counter32
  vrIpMcastPimSmDomainRxRegisterStopMsg Counter32
  vrIpMcastPimSmDomainTxAssertMsg Counter32
  vrIpMcastPimSmDomainRxAssertMsg Counter32
  vrIpMcastPimSmDomainTxJPMsg Counter32
  vrIpMcastPimSmDomainRxJPMsg Counter32
  vrIpMcastPimSmDomainDiscardBsrMsg Counter32
  vrIpMcastPimSmDomainDiscardCRpAdvMsg Counter32
  vrIpMcastPimSmDomainDiscardHelloMsg Counter32
  vrIpMcastPimSmDomainDiscardRegisterMsg Counter32
  vrIpMcastPimSmDomainDiscardRegisterStopMsg Counter32
  vrIpMcastPimSmDomainDiscardAssertMsg Counter32
  vrIpMcastPimSmDomainDiscardJPMsg Counter32

VrIpMcastPimSmDomainCRpRowStatusEntry  
SEQUENCE    
  vrIpMcastPimSmDomainCRpRowStatus RowStatus
  vrIpMcastPimSmDomainCRpComponentName DisplayString
  vrIpMcastPimSmDomainCRpStorageType StorageType
  vrIpMcastPimSmDomainCRpIndex NonReplicated

VrIpMcastPimSmDomainCRpProvEntry  
SEQUENCE    
  vrIpMcastPimSmDomainCRpCandidateRpAddress Link
  vrIpMcastPimSmDomainCRpCandidateRpPreference INTEGER

VrIpMcastPimSmDomainCRpGrpRowStatusEntry  
SEQUENCE    
  vrIpMcastPimSmDomainCRpGrpRowStatus RowStatus
  vrIpMcastPimSmDomainCRpGrpComponentName DisplayString
  vrIpMcastPimSmDomainCRpGrpStorageType StorageType
  vrIpMcastPimSmDomainCRpGrpGrpAddressIndex IpAddress
  vrIpMcastPimSmDomainCRpGrpGrpMaskIndex IpAddress

VrIpMcastPimSmDomainRpSetRowStatusEntry  
SEQUENCE    
  vrIpMcastPimSmDomainRpSetRowStatus RowStatus
  vrIpMcastPimSmDomainRpSetComponentName DisplayString
  vrIpMcastPimSmDomainRpSetStorageType StorageType
  vrIpMcastPimSmDomainRpSetGrpAddressIndex IpAddress
  vrIpMcastPimSmDomainRpSetGrpMaskIndex IpAddress
  vrIpMcastPimSmDomainRpSetRpAddressIndex IpAddress

VrIpMcastPimSmDomainRpSetOperEntry  
SEQUENCE    
  vrIpMcastPimSmDomainRpSetRpSetHoldTime Unsigned32
  vrIpMcastPimSmDomainRpSetRpSetExpiryTime TimeTicks
  vrIpMcastPimSmDomainRpSetRpSetPriority INTEGER

VrIpMcastPimSmDomainCBsrRowStatusEntry  
SEQUENCE    
  vrIpMcastPimSmDomainCBsrRowStatus RowStatus
  vrIpMcastPimSmDomainCBsrComponentName DisplayString
  vrIpMcastPimSmDomainCBsrStorageType StorageType
  vrIpMcastPimSmDomainCBsrIndex NonReplicated

VrIpMcastPimSmDomainCBsrProvEntry  
SEQUENCE    
  vrIpMcastPimSmDomainCBsrCandidateBsrAddress Link
  vrIpMcastPimSmDomainCBsrCandidateBsrPreference INTEGER

VrIpMcastPimNbrRowStatusEntry  
SEQUENCE    
  vrIpMcastPimNbrRowStatus RowStatus
  vrIpMcastPimNbrComponentName DisplayString
  vrIpMcastPimNbrStorageType StorageType
  vrIpMcastPimNbrNbrAddressIndex IpAddress
  vrIpMcastPimNbrDomainIndex Integer32

VrIpMcastPimNbrOperEntry  
SEQUENCE    
  vrIpMcastPimNbrIfIndex InterfaceIndex
  vrIpMcastPimNbrUpTime TimeTicks
  vrIpMcastPimNbrExpiryTimer TimeTicks

Defined Values

ipMIB 1.3.6.1.4.1.562.2.4.2.27
OBJECT IDENTIFIER    

vrPpIpPort 1.3.6.1.4.1.562.2.4.1.100.3.5
OBJECT IDENTIFIER    

vrPpIpPortRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.5.1
This entry controls the addition and deletion of vrPpIpPort components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortRowStatusEntry

vrPpIpPortRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.1.1
A single entry in the table represents a single vrPpIpPort component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortRowStatusEntry  

vrPpIpPortRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpPort components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrPpIpPortComponentName 1.3.6.1.4.1.562.2.4.1.100.3.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpPortStorageType 1.3.6.1.4.1.562.2.4.1.100.3.5.1.1.4
This variable represents the storage type value for the vrPpIpPort tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpPortIndex 1.3.6.1.4.1.562.2.4.1.100.3.5.1.1.10
This variable represents the index for the vrPpIpPort tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrPpIpPortProvTable 1.3.6.1.4.1.562.2.4.1.100.3.5.10
This group contains provisionable attributes for IP ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortProvEntry

vrPpIpPortProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1
An entry in the vrPpIpPortProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortProvEntry  

vrPpIpPortMaxTxUnit 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.2
This attribute specifies the IP MTU (Maximum Transmission Unit) supported by this IpPort. The specified MTU must be within the valid range for the IpPort media type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..0 | 576..18944  

vrPpIpPortArpStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.3
This attribute specifies whether ARP is enabled or disabled on this IpPort. If auto is specified, an appropriate value will be selected based on the IpPort media type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), auto(3)  

vrPpIpPortProxyArpStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.4
This attribute specifies whether Proxy ARP is enabled or disabled for this IpPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrPpIpPortArpNoLearn 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.5
This attribute specifies whether or not dynamic host entries will be installed in the ARP table when ARP packets are received on this IpPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrPpIpPortSendRedirect 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.6
This attribute specifies whether or not ICMP host redirects will be sent out this IpPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrPpIpPortMulticastStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.7
This attribute specifies whether or not IP multicast packets can be sent out this IpPort. If auto is specified, an appropriate value will be selected based on the IpPort media type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), auto(3)  

vrPpIpPortRelayAddress 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.8
This attribute specifies a relay broadcast address for this IpPort. Each packet, received on this IpPort, meeting the relay broadcast criteria will be forwarded to the specified relay broadcast address. An relay address of all zero's indicates no relay broadcast address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrPpIpPortRelayBroadcast 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.9
This attribute specifies how packets, received on other IpPorts, meeting the relay broadcast criteria, will be forwarded out this IpPort. The three options are described as follows: enabled: packets will be forwarded out this IpPort. disabled: packets will not be forwarded out this IpPort. auto: packets will be forwarded out this IpPort only when the bridge state is forwarding.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), auto(3)  

vrPpIpPortLinkModel 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.10
This attribute specifies the link model to use when the media type for this IpPort is PPP (Point to Point Protocol). A value of localAreaNetwork causes IP to treat this IpPort like a LAN. A value of pointToPoint causes IP to treat this IpPort like two directly connected IP hosts. A value of loopback causes IP to treat this IpPort similar to a point-to-point, but the destination and source points are the same providing an always up interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER localAreaNetwork(1), pointToPoint(2), loopback(5)  

vrPpIpPortLanModel 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.11
This attribute specifies the lan model to use for this IpPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER localAreaNetwork(1), nonBroadcastMultipleAccess(2)  

vrPpIpPortEncap 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.12
This attribute specifies the encapsulation type to be used when sending packets out this IpPort. If auto is specified, an appropriate value is selected based on the IpPort media type. The values ieee8023 and ethernet can only be specified if the media type is ethernet. Otherwise, auto must be specified. For ethernet media type, the default encapsulation is ethernet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ieee8023(1), ethernet(2), auto(3)  

vrPpIpPortIcmpMaskReply 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.13
This attribute specifies whether or not replies will be generated in response to ICMP Address Mask Requests received on this IpPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrPpIpPortDirectedBroadcast 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.14
This attribute specifies whether or not directed broadcast to physical broadcast translation is enabled for incoming traffic on this IpPort. The IP router requirement (RFC1812) says this translation should be enabled; however, in some network environments, setting this attribute to disabled may prevent operational problem such as broadcast storms. Note that in some configuration, setting this attribute to disabled may cause Bootp to fail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrPpIpPortAssignedQos 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.15
This attribute specifies the initial Class of Service (CoS) given to each packet received on the IpPort. The CoS value n is used to select Vr/ QosP/n. which determines the QualityofService-Profile to be used when the packet is forwarded. The intial CoS given to a packet by the assignedQoS attribute may be overriden under certain circumstances (see the description of the Vr Qosp component, the cosPolicyAssignment attribute on the IpPort and Ip components, and the ipCos attribute on any of the frameRelayDte staticDlci, frameRelayDte dynamicDlciDefaults, and atmMpe atmConnection components).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3  

vrPpIpPortAllowMcastMacDest 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.16
This attribute specifies whether a multicast destination MAC address is valid on this IpPort or not. Enabling it is non-standard. It can be used for applications such as transparent server backup. Multicast destination MAC address is only supported on LAN media.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrPpIpPortCosPolicyAssignment 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.17
This attribute specifies the CosPolicyGroup component this IpPort component is using. Assigning a particular policy group to the IpPort may override the effect of the assignedQos; this depends on the actual policies provisioned under the policy group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

vrPpIpPortMcastDomain 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.18
This attribute specifies the multicast domain index which all traffic coming in from this IpPort use. The numerical value of this attribute selects Vr/ Ip Mcast Domain/n.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3  

vrPpIpPortMcastPolicyAssignment 1.3.6.1.4.1.562.2.4.1.100.3.5.10.1.19
This attribute specifies the policyGroup component that this IpPort component is using.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

vrPpIpPortSresProvTable 1.3.6.1.4.1.562.2.4.1.100.3.5.11
This group contains the provisioned attributes for SourceRouteEndStation support.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortSresProvEntry

vrPpIpPortSresProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.11.1
An entry in the vrPpIpPortSresProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortSresProvEntry  

vrPpIpPortSourceRouteEndStationSupport 1.3.6.1.4.1.562.2.4.1.100.3.5.11.1.1
This attribute is used to enable or disable support for SourceRouteEndStation (Sres). If set to enable, Sres will be supported on this protocol on this ProtocolPort (Pp). If set to disable, it will not be supported. An Sres component must be provisioned under the VirtualRouter if this attribute is set to enable. If this attribute is set to enable and this Pp has its linkToMedia attribute set, it must be linked to a LanApplication (La) that has its Framer interfaceName linked to a Fddi or TokenRing component.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

vrPpIpPortAdminControlTable 1.3.6.1.4.1.562.2.4.1.100.3.5.12
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortAdminControlEntry

vrPpIpPortAdminControlEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.12.1
An entry in the vrPpIpPortAdminControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortAdminControlEntry  

vrPpIpPortSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.12.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrPpIpPortOperTable 1.3.6.1.4.1.562.2.4.1.100.3.5.13
This group contains operational attributes for an IpPort.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortOperEntry

vrPpIpPortOperEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.13.1
An entry in the vrPpIpPortOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortOperEntry  

vrPpIpPortMediaType 1.3.6.1.4.1.562.2.4.1.100.3.5.13.1.1
This attribute indicates the media type of this IpPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ethernet(1), fddi(2), tokenRing(3), ppp(4), vcpEther(5), vcpToken(6), vns(7), x25(8), frameRelay(9), clusterBridge(10), smds(11), invalid(12), atmMpeVcEncap(13), atmMpeLlcEncap(14), lecEther(15), lecToken(16), tunnel(17), virtual(18)  

vrPpIpPortOperMtu 1.3.6.1.4.1.562.2.4.1.100.3.5.13.1.2
This attribute indicates the current operational IP MTU for this IpPort. Note that this value may be different than the provisioned maxTxUnit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..0 | 576..18944  

vrPpIpPortOperArpStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.13.1.3
This attribute indicates the current operational ARP status. If the provisioned arpStatus is set to auto, then the IP application automatically determines the operArpStatus based on the IpPort media type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrPpIpPortOperMulticastStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.13.1.4
This attribute indicates the current operational Multicast status. If the provisioned multicastStatus is set to auto, then the IP application automatically determines the operMulticastStatus based on the IpPort media type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrPpIpPortOperEncap 1.3.6.1.4.1.562.2.4.1.100.3.5.13.1.5
This attribute indicates the current operational encapsulation type. If the provisioned encap is set to auto, then the IP application automatically determines the operEncap based on the IpPort media type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ieee8023(1), ethernet(2), notApplicable(3)  

vrPpIpPortOperCosPolicyAssignment 1.3.6.1.4.1.562.2.4.1.100.3.5.13.1.433
This attribute specifies the CosPolicyGroup component this IpPort component is using.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

vrPpIpPortRelayBcOperTable 1.3.6.1.4.1.562.2.4.1.100.3.5.14
This group contains operational attributes for an IpPort's RelayBc counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortRelayBcOperEntry

vrPpIpPortRelayBcOperEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.14.1
An entry in the vrPpIpPortRelayBcOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortRelayBcOperEntry  

vrPpIpPortRelayAddressCount 1.3.6.1.4.1.562.2.4.1.100.3.5.14.1.1
This attribute indicates the number of frames received on this IpPort which were forwarded to the provisioned relayAddress for this port. This counter wraps to zero when it reaches it's maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpPortRelayBcCount 1.3.6.1.4.1.562.2.4.1.100.3.5.14.1.2
This attribute indicates the number of frames received on this port which were forwarded to the broadcastAddress on other IpPorts. This counter is incremented once for every frame received on this port regardless of how many other ports it was sent on. This counter wraps to zero when it reaches it's maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpPortStateTable 1.3.6.1.4.1.562.2.4.1.100.3.5.15
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortStateEntry

vrPpIpPortStateEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.15.1
An entry in the vrPpIpPortStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortStateEntry  

vrPpIpPortAdminState 1.3.6.1.4.1.562.2.4.1.100.3.5.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrPpIpPortOperationalState 1.3.6.1.4.1.562.2.4.1.100.3.5.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrPpIpPortUsageState 1.3.6.1.4.1.562.2.4.1.100.3.5.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrPpIpPortOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.5.16
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortOperStatusEntry

vrPpIpPortOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.16.1
An entry in the vrPpIpPortOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortOperStatusEntry  

vrPpIpPortSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.16.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrPpIpPortLogicalIf 1.3.6.1.4.1.562.2.4.1.100.3.5.2
OBJECT IDENTIFIER    

vrPpIpPortLogicalIfRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.1
This entry controls the addition and deletion of vrPpIpPortLogicalIf components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfRowStatusEntry

vrPpIpPortLogicalIfRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.1.1
A single entry in the table represents a single vrPpIpPortLogicalIf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfRowStatusEntry  

vrPpIpPortLogicalIfRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.2.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIf components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrPpIpPortLogicalIfComponentName 1.3.6.1.4.1.562.2.4.1.100.3.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpPortLogicalIfStorageType 1.3.6.1.4.1.562.2.4.1.100.3.5.2.1.1.4
This variable represents the storage type value for the vrPpIpPortLogicalIf tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpPortLogicalIfAddressIndex 1.3.6.1.4.1.562.2.4.1.100.3.5.2.1.1.10
This variable represents the index for the vrPpIpPortLogicalIf tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrPpIpPortLogicalIfProvTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.10
This group contains attributes required to define an IpLogicalIf.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfProvEntry

vrPpIpPortLogicalIfProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.10.1
An entry in the vrPpIpPortLogicalIfProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfProvEntry  

vrPpIpPortLogicalIfNetMask 1.3.6.1.4.1.562.2.4.1.100.3.5.2.10.1.1
This attribute specifies the subnet mask for this IpLogicalIf. This attribute must be specified because the IP application will not automatically provide a default value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrPpIpPortLogicalIfBroadcastAddress 1.3.6.1.4.1.562.2.4.1.100.3.5.2.10.1.2
This attribute specifies the broadcast address for this IpLogicalIf. This attribute is ignored if the IpPort mediaType is ppp (Point to Point Protocol). If the value is 0.0.0.0, the actual broadcast address will be derived from the IP address of this LogicalIf and the netmask attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrPpIpPortLogicalIfLinkDestinationAddress 1.3.6.1.4.1.562.2.4.1.100.3.5.2.10.1.3
This attribute specifies the address for the link destination for this IpLogicalIf. This attribute is only required if the IpPort media type is PPP (Point to Point Protocol).
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrPpIpPortLogicalIfLinkToPimSmCandidateRp 1.3.6.1.4.1.562.2.4.1.100.3.5.2.10.1.4
This attribute specifies a link to the CandidateRendezvousPoint component which uses this logicalIf as it's RendezvousPoint (Rp).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

vrPpIpPortLogicalIfLinkToPimSmCandidateBsr 1.3.6.1.4.1.562.2.4.1.100.3.5.2.10.1.5
This attribute specifies a link to the CandidateBootstrapRouter component which uses this logicalIf as it's BootstrapRouter Interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

vrPpIpPortLogicalIfLinkToMulStaticGpTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.706
This attribute specifies a link to the component InwStaticRouteEntry which uses this logicalIf as it's OutInterface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfLinkToMulStaticGpEntry

vrPpIpPortLogicalIfLinkToMulStaticGpEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.706.1
An entry in the vrPpIpPortLogicalIfLinkToMulStaticGpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfLinkToMulStaticGpEntry  

vrPpIpPortLogicalIfLinkToMulStaticGpValue 1.3.6.1.4.1.562.2.4.1.100.3.5.2.706.1.1
This variable represents both the value and the index for the vrPpIpPortLogicalIfLinkToMulStaticGpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

vrPpIpPortLogicalIfLinkToMulStaticGpRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.2.706.1.2
This variable is used to control the addition and deletion of individual values of the vrPpIpPortLogicalIfLinkToMulStaticGpTable.
Status: mandatory Access: write-only
OBJECT-TYPE    
  RowStatus  

vrPpIpPortLogicalIfOspfIf 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2
OBJECT IDENTIFIER    

vrPpIpPortLogicalIfOspfIfRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.1
This entry controls the addition and deletion of vrPpIpPortLogicalIfOspfIf components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfOspfIfRowStatusEntry

vrPpIpPortLogicalIfOspfIfRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.1.1
A single entry in the table represents a single vrPpIpPortLogicalIfOspfIf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfOspfIfRowStatusEntry  

vrPpIpPortLogicalIfOspfIfRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIfOspfIf components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrPpIpPortLogicalIfOspfIfComponentName 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpPortLogicalIfOspfIfStorageType 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.1.1.4
This variable represents the storage type value for the vrPpIpPortLogicalIfOspfIf tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpPortLogicalIfOspfIfIndex 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.1.1.10
This variable represents the index for the vrPpIpPortLogicalIfOspfIf tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrPpIpPortLogicalIfOspfIfProvTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.10
This group of attributes identifies a provisionable set of attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfOspfIfProvEntry

vrPpIpPortLogicalIfOspfIfProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.10.1
An entry in the vrPpIpPortLogicalIfOspfIfProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfOspfIfProvEntry  

vrPpIpPortLogicalIfOspfIfAreaId 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.10.1.1
The area Id this Ospf interface belongs to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AreaID  

vrPpIpPortLogicalIfOspfIfIfType 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.10.1.2
This attribute indicates the type of this Ospf interface. This interface type does not necessarily correlate with the type of the interface set on the logicalIf entry under IpPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER broadcast(1), nbma(2), pointToPoint(3), loopback(5)  

vrPpIpPortLogicalIfOspfIfSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.10.1.3
The administrative status of this Ospf interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2)  

vrPpIpPortLogicalIfOspfIfRtrPriority 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.10.1.4
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular protocol port. In the event of a tie in this value, routers will use their routerId as a tie breaker.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

vrPpIpPortLogicalIfOspfIfTransitDelay 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.10.1.5
The estimated number of seconds it takes to transmit a link-state update packet over this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..3600  

vrPpIpPortLogicalIfOspfIfRetransInterval 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.10.1.6
The number of seconds between link-state advertisements retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..3600  

vrPpIpPortLogicalIfOspfIfHelloInterval 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.10.1.7
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..3600  

vrPpIpPortLogicalIfOspfIfRtrDeadInterval 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.10.1.8
The number of seconds that a router's hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the helloIntereval. This value must be the same for all routers attached to a common network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..3600  

vrPpIpPortLogicalIfOspfIfPollInterval 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.10.1.9
The largest time interval, in seconds, between the hello packets sent to an inactive non-broadcast multi-access neighbor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..3600  

vrPpIpPortLogicalIfOspfIfAuthKey 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.10.1.10
The Authentication Key. If the value of the attribute authType of an AreaEntry is simplePassword, and the authKey length is shorter than 8 octets, then the value of authKey will be left adjusted zero-filled to 8 octets.
Status: mandatory Access: write-only
OBJECT-TYPE    
  HexString Size(1..8)  

vrPpIpPortLogicalIfOspfIfMulticastForwarding 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.10.1.12
The way multicasts should be forwarded on this interface; non forwarded, forwarded as data-link multicasts, or forwarded as data-link unicasts. Data-link multicasting is not meaningful on point-to-point and NBMA(No Broadcast Multi Access) interfaces, and setting this attribute to blocked effectively disables all multicast forwarding.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER blocked(1)  

vrPpIpPortLogicalIfOspfIfOperTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.11
This group of attributes identifies operational state that this interface is performing.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfOspfIfOperEntry

vrPpIpPortLogicalIfOspfIfOperEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.11.1
An entry in the vrPpIpPortLogicalIfOspfIfOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfOspfIfOperEntry  

vrPpIpPortLogicalIfOspfIfState 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.11.1.1
The state of the OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7)  

vrPpIpPortLogicalIfOspfIfDesignatedRouter 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.11.1.2
The Ip address of the designated router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vrPpIpPortLogicalIfOspfIfBackupDesignatedRouter 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.11.1.3
The Ip address of the backup designated router
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vrPpIpPortLogicalIfOspfIfEvents 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.11.1.4
The number of times this OSPF interface has changed its state or an error has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpPortLogicalIfOspfIfMetricTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.12
This group contains the operational metric attribute of this interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfOspfIfMetricEntry

vrPpIpPortLogicalIfOspfIfMetricEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.12.1
An entry in the vrPpIpPortLogicalIfOspfIfMetricTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfOspfIfMetricEntry  

vrPpIpPortLogicalIfOspfIfMetric 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.12.1.1
This attribute indicates the metric being used by this OspfIf. The metric is derived in one of two ways: 1. If there is a TypeOfService component provisioned under this OspfIf component, then the value of the metric attribute is copied from the provisionable attribute tosMetric. 2. Otherwise, the metric is computed based on the interface speed. If the interface speed is greater than 100 Mbit/s, then the metric is 1. If the interface speed is less than 100 Mbit/s, then the metric is 100 Mbit/s divided by the interface speed. If the interface speed is unknown, then it is treated as 1.54 Mbit/s during the calculation. The value of interface speed is available by displaying the ifSpeed attribute of the corresponding IfTableEntry component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrPpIpPortLogicalIfOspfIfTOS 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.2
OBJECT IDENTIFIER    

vrPpIpPortLogicalIfOspfIfTOSRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.2.1
This entry controls the addition and deletion of vrPpIpPortLogicalIfOspfIfTOS components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfOspfIfTOSRowStatusEntry

vrPpIpPortLogicalIfOspfIfTOSRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.2.1.1
A single entry in the table represents a single vrPpIpPortLogicalIfOspfIfTOS component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfOspfIfTOSRowStatusEntry  

vrPpIpPortLogicalIfOspfIfTOSRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.2.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIfOspfIfTOS components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrPpIpPortLogicalIfOspfIfTOSComponentName 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpPortLogicalIfOspfIfTOSStorageType 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.2.1.1.4
This variable represents the storage type value for the vrPpIpPortLogicalIfOspfIfTOS tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpPortLogicalIfOspfIfTOSMetricTosIndex 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.2.1.1.10
This variable represents the index for the vrPpIpPortLogicalIfOspfIfTOS tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..0  

vrPpIpPortLogicalIfOspfIfTOSProvTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.2.10
Identifies a provisionable set of attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfOspfIfTOSProvEntry

vrPpIpPortLogicalIfOspfIfTOSProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.2.10.1
An entry in the vrPpIpPortLogicalIfOspfIfTOSProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfOspfIfTOSProvEntry  

vrPpIpPortLogicalIfOspfIfTOSTosMetric 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.2.10.1.1
The metric using this typeOfService on this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

vrPpIpPortLogicalIfOspfIfNbr 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3
OBJECT IDENTIFIER    

vrPpIpPortLogicalIfOspfIfNbrRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.1
This entry controls the addition and deletion of vrPpIpPortLogicalIfOspfIfNbr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfOspfIfNbrRowStatusEntry

vrPpIpPortLogicalIfOspfIfNbrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.1.1
A single entry in the table represents a single vrPpIpPortLogicalIfOspfIfNbr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfOspfIfNbrRowStatusEntry  

vrPpIpPortLogicalIfOspfIfNbrRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIfOspfIfNbr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrPpIpPortLogicalIfOspfIfNbrComponentName 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpPortLogicalIfOspfIfNbrStorageType 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.1.1.4
This variable represents the storage type value for the vrPpIpPortLogicalIfOspfIfNbr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpPortLogicalIfOspfIfNbrAddressIndex 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.1.1.10
This variable represents the index for the vrPpIpPortLogicalIfOspfIfNbr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrPpIpPortLogicalIfOspfIfNbrProvTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.10
Identifies a group of Provisionable attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfOspfIfNbrProvEntry

vrPpIpPortLogicalIfOspfIfNbrProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.10.1
An entry in the vrPpIpPortLogicalIfOspfIfNbrProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfOspfIfNbrProvEntry  

vrPpIpPortLogicalIfOspfIfNbrPriority 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.10.1.1
The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network. The higher the number, the better are the chances of being a designated router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

vrPpIpPortLogicalIfOspfIfNbrOperTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.11
Contains the Operational set of attributes for the Neighbor.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfOspfIfNbrOperEntry

vrPpIpPortLogicalIfOspfIfNbrOperEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.11.1
An entry in the vrPpIpPortLogicalIfOspfIfNbrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfOspfIfNbrOperEntry  

vrPpIpPortLogicalIfOspfIfNbrRtrId 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.11.1.1
An Ip Address uniquely identifying the neighboring router in the Autonomous System.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RouterID  

vrPpIpPortLogicalIfOspfIfNbrOptions 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.11.1.2
A bit mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information, if zero, it is a stub area. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; i.e., that it implements OSPF Multicast Routing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..15  

vrPpIpPortLogicalIfOspfIfNbrState 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.11.1.3
The state of the relationship with this neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)  

vrPpIpPortLogicalIfOspfIfNbrEvents 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.11.1.4
The number of times this neighbor relationship has changed state, or an error has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpPortLogicalIfOspfIfNbrLsRetransQlen 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.11.1.5
The current length of the Retransmission queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

vrPpIpPortLogicalIfOspfIfNbrExchangeStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.11.1.6
Indicates the exchange status for a neighbor Entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER master(1), slave(2)  

vrPpIpPortLogicalIfOspfIfNbrPermanance 1.3.6.1.4.1.562.2.4.1.100.3.5.2.2.3.11.1.9
This attribute displays how the neighbor became an entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER permanent(1), dynamic(2)  

vrPpIpPortLogicalIfRipIf 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3
OBJECT IDENTIFIER    

vrPpIpPortLogicalIfRipIfRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.1
This entry controls the addition and deletion of vrPpIpPortLogicalIfRipIf components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfRipIfRowStatusEntry

vrPpIpPortLogicalIfRipIfRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.1.1
A single entry in the table represents a single vrPpIpPortLogicalIfRipIf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfRipIfRowStatusEntry  

vrPpIpPortLogicalIfRipIfRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIfRipIf components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrPpIpPortLogicalIfRipIfComponentName 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpPortLogicalIfRipIfStorageType 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.1.1.4
This variable represents the storage type value for the vrPpIpPortLogicalIfRipIf tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpPortLogicalIfRipIfIndex 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.1.1.10
This variable represents the index for the vrPpIpPortLogicalIfRipIf tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrPpIpPortLogicalIfRipIfProvTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.10
This group contains the provisionable attributes of the RipIf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfRipIfProvEntry

vrPpIpPortLogicalIfRipIfProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.10.1
An entry in the vrPpIpPortLogicalIfRipIfProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfRipIfProvEntry  

vrPpIpPortLogicalIfRipIfSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.10.1.1
Identifies the administrative status of this RipInterface. Setting this value to disabled will have the effect of rendering it inactive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2)  

vrPpIpPortLogicalIfRipIfMetric 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.10.1.2
This attribute is the RIP metric for this logical interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..16  

vrPpIpPortLogicalIfRipIfSilentFlag 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.10.1.3
If the value of this attribute is set to true, the protocol will only listen to RIP updates, If set to false, then Rip will listen and send RIP updates.This attribute has been migrated to ifConfSend.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

vrPpIpPortLogicalIfRipIfPoisonReverseFlag 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.10.1.4
If the value of this attribute is set to true, then poison reverse algorithm is used when sending out the updates otherwise use split horizon only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

vrPpIpPortLogicalIfRipIfFlashUpdateFlag 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.10.1.5
This attribute when set to true will send updates when updates are received; otherwise RIP will wait till the next update period.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

vrPpIpPortLogicalIfRipIfNetworkRouteStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.10.1.6
This attribute determines what type of network routes will be sent and whether a default route will be generated for this RipInterface. Generated default routes will not go into the routing table, but are sent in the updates going out on the interface. The possible values for this attribute are: naturalNetWithOutDefaultRoute - This value will cause normal RIP network routes to be put in the update. This means that the address of logicalIf pertaining to this RipInterface knowledge is taken into account in determining if the subnetted network or the natural network is sent for any route going into this update. naturalNetWithDefaultRoute - Selecting this value will cause a default route to be generated with the value of the metric selected for the attribute defaultRouteMetric. defaultRouteOnly - Selection of this value causes the default route to be generated with the value of the metric selected for the attribute defaultRouteMetric. NOTE: No other routes will go in the update. subnetsOnly - selection of this value will cause only subnet information to be put in the update. No default routes will be generated or passed on. Only subnetted routes that are part of the same subnetted network that this logicalInterface is on will be put in the update. NOTE: this also effects receiving of updates on this interface. Only subnetted routes that are part of the same subnetted network that this logicalInterface is on will be accepted on a received RIP update on this RipInterface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER naturalNetWithOutDefaultRoute(1), naturalNetWithDefaultRoute(2), defaultRouteOnly(3), subnetsOnly(4)  

vrPpIpPortLogicalIfRipIfDefaultRouteMetric 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.10.1.7
This attribute identifies the metric value for the default route. This value is only used if the attribute networkRouteStatus is configured with a value of either naturalNetWithDefaultRoute or defaultRouteOnly
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..16  

vrPpIpPortLogicalIfRipIfAcceptDefault 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.10.1.8
If this attribute is set to true, then accept the default route from this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

vrPpIpPortLogicalIfRipIfIfConfSend 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.10.1.12
This attribute identifies what the router sends on this RipIf. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates according to RFC 1058. ripVersion2 implies multicasting RIP-2 updates.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER doNotSend(1), ripVersion1(2), rip1Compatible(3), ripVersion2(4)  

vrPpIpPortLogicalIfRipIfIfConfReceive 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.10.1.13
This attribute identifies which version of RIP updates are to be accepted on this RipIf. Note that rip2 and rip1OrRip2 implies reception of multicast packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rip1(1), rip2(2), rip1OrRip2(3), doNotReceive(4)  

vrPpIpPortLogicalIfRipIfStatTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.11
This group contains operational attributes of the RipIf component. These attributes are statistical data corresponding to the RIP-2 standard MIB (rfc 1724) rip2Status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfRipIfStatEntry

vrPpIpPortLogicalIfRipIfStatEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.11.1
An entry in the vrPpIpPortLogicalIfRipIfStatTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfRipIfStatEntry  

vrPpIpPortLogicalIfRipIfIfBadPacketRcv 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.11.1.1
This attribute counts the number of RIP response packets recieved by the RIP process which were subsequently discarded for any reason.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrPpIpPortLogicalIfRipIfIfBadRouteRcv 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.11.1.2
This attribute counts how many routes, in valid RIP packets, were ignored for any reason.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrPpIpPortLogicalIfRipIfIfTriggeredUpdates 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.11.1.3
This attribute counts the number of triggered updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrPpIpPortLogicalIfRipIfNbr 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.2
OBJECT IDENTIFIER    

vrPpIpPortLogicalIfRipIfNbrRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.2.1
This entry controls the addition and deletion of vrPpIpPortLogicalIfRipIfNbr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfRipIfNbrRowStatusEntry

vrPpIpPortLogicalIfRipIfNbrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.2.1.1
A single entry in the table represents a single vrPpIpPortLogicalIfRipIfNbr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfRipIfNbrRowStatusEntry  

vrPpIpPortLogicalIfRipIfNbrRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.2.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIfRipIfNbr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrPpIpPortLogicalIfRipIfNbrComponentName 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpPortLogicalIfRipIfNbrStorageType 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.2.1.1.4
This variable represents the storage type value for the vrPpIpPortLogicalIfRipIfNbr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpPortLogicalIfRipIfNbrIndex 1.3.6.1.4.1.562.2.4.1.100.3.5.2.3.2.1.1.10
This variable represents the index for the vrPpIpPortLogicalIfRipIfNbr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrPpIpPortLogicalIfIgmpIf 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5
OBJECT IDENTIFIER    

vrPpIpPortLogicalIfIgmpIfRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.1
This entry controls the addition and deletion of vrPpIpPortLogicalIfIgmpIf components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfIgmpIfRowStatusEntry

vrPpIpPortLogicalIfIgmpIfRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.1.1
A single entry in the table represents a single vrPpIpPortLogicalIfIgmpIf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfIgmpIfRowStatusEntry  

vrPpIpPortLogicalIfIgmpIfRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIfIgmpIf components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrPpIpPortLogicalIfIgmpIfComponentName 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpPortLogicalIfIgmpIfStorageType 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.1.1.4
This variable represents the storage type value for the vrPpIpPortLogicalIfIgmpIf tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpPortLogicalIfIgmpIfIndex 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.1.1.10
This variable represents the index for the vrPpIpPortLogicalIfIgmpIf tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrPpIpPortLogicalIfIgmpIfProvTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.10
This group contains the provisionable attributes for the InwIpIgmpIf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfIgmpIfProvEntry

vrPpIpPortLogicalIfIgmpIfProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.10.1
An entry in the vrPpIpPortLogicalIfIgmpIfProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfIgmpIfProvEntry  

vrPpIpPortLogicalIfIgmpIfVersion 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.10.1.1
This attribute specifies the IGMP protocol version running on this interface. v2 is the only supported version at this time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER v2(2)  

vrPpIpPortLogicalIfIgmpIfQueryInterval 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.10.1.2
This attribute specifies the frequency at which IGMP Host-Query packets are transmitted on this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..3600  

vrPpIpPortLogicalIfIgmpIfQueryMaxRespTime 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.10.1.3
This attribute specifies the maximum query response time advertised in IGMPv2 queries on this interface. The number of seconds represented by the queryMaxRespTime must be less than the Query Interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..3600  

vrPpIpPortLogicalIfIgmpIfOperTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.11
This group contains the operational attributes of InwIpIgmpIf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfIgmpIfOperEntry

vrPpIpPortLogicalIfIgmpIfOperEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.11.1
An entry in the vrPpIpPortLogicalIfIgmpIfOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfIgmpIfOperEntry  

vrPpIpPortLogicalIfIgmpIfQuerier 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.11.1.2
This attribute indicates the address of the IGMP Querier on the IP subnet to which this interface is attached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vrPpIpPortLogicalIfIgmpIfWrongVersionQuery 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.11.1.3
This attribute indicates the number of queries received whose IGMP version does not match that configured for this interface. IGMP requires that all routers on a LAN be configured to run the same version of IGMP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpPortLogicalIfIgmpIfJoins 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.11.1.4
This attribute indicates the number of times a group membership has been added on this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpPortLogicalIfIgmpIfGroups 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.11.1.5
This attribute indicates the current number of entries for this interface in the cache table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4292967295  

vrPpIpPortLogicalIfIgmpIfQuerierExpiryTime 1.3.6.1.4.1.562.2.4.1.100.3.5.2.5.11.1.6
This attribute indicates the amount of time remaining before the other querier present timer expires. If the local system is the querier, the value of this object is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..3600  

vrPpIpPortLogicalIfPimSmIf 1.3.6.1.4.1.562.2.4.1.100.3.5.2.6
OBJECT IDENTIFIER    

vrPpIpPortLogicalIfPimSmIfRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.6.1
This entry controls the addition and deletion of vrPpIpPortLogicalIfPimSmIf components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfPimSmIfRowStatusEntry

vrPpIpPortLogicalIfPimSmIfRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.6.1.1
A single entry in the table represents a single vrPpIpPortLogicalIfPimSmIf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfPimSmIfRowStatusEntry  

vrPpIpPortLogicalIfPimSmIfRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.2.6.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIfPimSmIf components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrPpIpPortLogicalIfPimSmIfComponentName 1.3.6.1.4.1.562.2.4.1.100.3.5.2.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpPortLogicalIfPimSmIfStorageType 1.3.6.1.4.1.562.2.4.1.100.3.5.2.6.1.1.4
This variable represents the storage type value for the vrPpIpPortLogicalIfPimSmIf tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpPortLogicalIfPimSmIfIndex 1.3.6.1.4.1.562.2.4.1.100.3.5.2.6.1.1.10
This variable represents the index for the vrPpIpPortLogicalIfPimSmIf tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrPpIpPortLogicalIfPimSmIfProvTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.6.10
This group contains the provisionable attributes for the InwIpPimSmIf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfPimSmIfProvEntry

vrPpIpPortLogicalIfPimSmIfProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.6.10.1
An entry in the vrPpIpPortLogicalIfPimSmIfProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfPimSmIfProvEntry  

vrPpIpPortLogicalIfPimSmIfHelloInterval 1.3.6.1.4.1.562.2.4.1.100.3.5.2.6.10.1.1
This attribute specifies the frequency at which PIM-SM hello messages are transmitted on this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..3600  

vrPpIpPortLogicalIfPimSmIfOperTable 1.3.6.1.4.1.562.2.4.1.100.3.5.2.6.11
This group contains the operational attributes for the InwIpPimSmIf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortLogicalIfPimSmIfOperEntry

vrPpIpPortLogicalIfPimSmIfOperEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.2.6.11.1
An entry in the vrPpIpPortLogicalIfPimSmIfOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortLogicalIfPimSmIfOperEntry  

vrPpIpPortLogicalIfPimSmIfDesignatedRouter 1.3.6.1.4.1.562.2.4.1.100.3.5.2.6.11.1.1
This attribute indicates the Designated Router on this PIM-SM interface. For point-to-point interfaces(wan media), this attribute has the value 0.0.0.0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vrPpIpPortNs 1.3.6.1.4.1.562.2.4.1.100.3.5.3
OBJECT IDENTIFIER    

vrPpIpPortNsRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.5.3.1
This entry controls the addition and deletion of vrPpIpPortNs components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortNsRowStatusEntry

vrPpIpPortNsRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.3.1.1
A single entry in the table represents a single vrPpIpPortNs component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortNsRowStatusEntry  

vrPpIpPortNsRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.3.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpPortNs components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrPpIpPortNsComponentName 1.3.6.1.4.1.562.2.4.1.100.3.5.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpPortNsStorageType 1.3.6.1.4.1.562.2.4.1.100.3.5.3.1.1.4
This variable represents the storage type value for the vrPpIpPortNs tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpPortNsIndex 1.3.6.1.4.1.562.2.4.1.100.3.5.3.1.1.10
This variable represents the index for the vrPpIpPortNs tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrPpIpPortNsProvTable 1.3.6.1.4.1.562.2.4.1.100.3.5.3.10
This group contains the attributes required by NetSentry to be applied to all IP packets going through this IpPort.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortNsProvEntry

vrPpIpPortNsProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.3.10.1
An entry in the vrPpIpPortNsProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortNsProvEntry  

vrPpIpPortNsIncomingFilter 1.3.6.1.4.1.562.2.4.1.100.3.5.3.10.1.1
An ASCII string which provides the name of the NetSentry filter which will be applied to all IP datagrams arriving from this IpPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

vrPpIpPortNsOutgoingFilter 1.3.6.1.4.1.562.2.4.1.100.3.5.3.10.1.2
An ASCII string which provides the name of NetSentry filter which will be applied to all IP datagrams sent to this IpPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

vrPpIpPortBootpP 1.3.6.1.4.1.562.2.4.1.100.3.5.4
OBJECT IDENTIFIER    

vrPpIpPortBootpPRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.5.4.1
This entry controls the addition and deletion of vrPpIpPortBootpP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortBootpPRowStatusEntry

vrPpIpPortBootpPRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.4.1.1
A single entry in the table represents a single vrPpIpPortBootpP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortBootpPRowStatusEntry  

vrPpIpPortBootpPRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.4.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpPortBootpP components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrPpIpPortBootpPComponentName 1.3.6.1.4.1.562.2.4.1.100.3.5.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpPortBootpPStorageType 1.3.6.1.4.1.562.2.4.1.100.3.5.4.1.1.4
This variable represents the storage type value for the vrPpIpPortBootpP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpPortBootpPIndex 1.3.6.1.4.1.562.2.4.1.100.3.5.4.1.1.10
This variable represents the index for the vrPpIpPortBootpP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrPpIpPortBootpPProvTable 1.3.6.1.4.1.562.2.4.1.100.3.5.4.10
This group contains provisionable attributes for the BootpPort component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortBootpPProvEntry

vrPpIpPortBootpPProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.4.10.1
An entry in the vrPpIpPortBootpPProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortBootpPProvEntry  

vrPpIpPortBootpPRelayForwardStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.4.10.1.2
This attribute controls how BOOTP request packets, received on another port, will be flooded out this port. If relayForwardStatus is enabled, BOOTP requests received on another port will be broadcast out this port. When relayForwardStatus is disabled, BOOTP requests will not be broadcast out this port. If auto is used, the bridge spanning tree database is used to determine if BOOTP requests should be broadcast out this port. Note that when using enabled, it is possible to create misconfigurations which will result in broadcast storms. When using this feature with multiple routers, make sure there are no broadcast forwarding loops. Using auto with bridge spanning tree is safer to use if the network is running bridge spanning tree. Note that for auto to have effect, bridge spanning tree must be running on the corresponding VirtualRouter ProtocolPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), auto(3)  

vrPpIpPortBootpPBootpLogicalInterface 1.3.6.1.4.1.562.2.4.1.100.3.5.4.10.1.3
This attribute identifies the logical interface whose address is to be the GIADDR of this BOOTP port. If not set, the address of the first logical port is chosen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrPpIpPortBootpPAdminControlTable 1.3.6.1.4.1.562.2.4.1.100.3.5.4.11
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortBootpPAdminControlEntry

vrPpIpPortBootpPAdminControlEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.4.11.1
An entry in the vrPpIpPortBootpPAdminControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortBootpPAdminControlEntry  

vrPpIpPortBootpPSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.4.11.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrPpIpPortBootpPOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.5.4.12
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortBootpPOperStatusEntry

vrPpIpPortBootpPOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.4.12.1
An entry in the vrPpIpPortBootpPOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortBootpPOperStatusEntry  

vrPpIpPortBootpPSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.4.12.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrPpIpPortBootpPStateTable 1.3.6.1.4.1.562.2.4.1.100.3.5.4.13
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortBootpPStateEntry

vrPpIpPortBootpPStateEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.4.13.1
An entry in the vrPpIpPortBootpPStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortBootpPStateEntry  

vrPpIpPortBootpPAdminState 1.3.6.1.4.1.562.2.4.1.100.3.5.4.13.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrPpIpPortBootpPOperationalState 1.3.6.1.4.1.562.2.4.1.100.3.5.4.13.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrPpIpPortBootpPUsageState 1.3.6.1.4.1.562.2.4.1.100.3.5.4.13.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrPpIpPortBootpPStatsTable 1.3.6.1.4.1.562.2.4.1.100.3.5.4.14
This group contains BootpPortEntry component statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortBootpPStatsEntry

vrPpIpPortBootpPStatsEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.4.14.1
An entry in the vrPpIpPortBootpPStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortBootpPStatsEntry  

vrPpIpPortBootpPInRequests 1.3.6.1.4.1.562.2.4.1.100.3.5.4.14.1.1
This attribute counts the total number of BOOTP Request messages received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpPortBootpPInReplies 1.3.6.1.4.1.562.2.4.1.100.3.5.4.14.1.2
This attribute counts the total number of BOOTP Reply messages received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpPortBootpPOutRequests 1.3.6.1.4.1.562.2.4.1.100.3.5.4.14.1.3
This attribute counts total the number of BOOTP Request messages broadcast out on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpPortBootpPOutReplies 1.3.6.1.4.1.562.2.4.1.100.3.5.4.14.1.4
This attribute counts the total number of BOOTP Reply messages sent out on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpPortBootpPInRequestErrors 1.3.6.1.4.1.562.2.4.1.100.3.5.4.14.1.5
This attribute counts the number of BOOTP Request messages received on this port but not forwarded due to an error. An error occurs if the BOOTP hop limit has been exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpPortBootpPInReplyErrors 1.3.6.1.4.1.562.2.4.1.100.3.5.4.14.1.6
This attribute counts the number of BOOTP Reply messages received on this port but not forwarded due to an error. An error occurs if the giaddr field in the BOOTP reply does not match an IP address assigned to this VirtualRouter, or if the output IpPort for the BOOTP reply is not provisioned for BOOTP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpPortBootpPAddrTable 1.3.6.1.4.1.562.2.4.1.100.3.5.4.290
This attribute identifies a list of relay addresses. When a BOOTP request message is received on this port, the request will be forwarded to the IP addresses provisioned in relayAddress. Note that BOOTP requests are also broadcast out all other BootpPort's according to the relayForwardStatus of the outgoing port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpPortBootpPAddrEntry

vrPpIpPortBootpPAddrEntry 1.3.6.1.4.1.562.2.4.1.100.3.5.4.290.1
An entry in the vrPpIpPortBootpPAddrTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpPortBootpPAddrEntry  

vrPpIpPortBootpPAddrValue 1.3.6.1.4.1.562.2.4.1.100.3.5.4.290.1.1
This variable represents both the value and the index for the vrPpIpPortBootpPAddrTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrPpIpPortBootpPAddrRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.5.4.290.1.2
This variable is used to control the addition and deletion of individual values of the vrPpIpPortBootpPAddrTable.
Status: mandatory Access: write-only
OBJECT-TYPE    
  RowStatus  

vrIp 1.3.6.1.4.1.562.2.4.1.100.6
OBJECT IDENTIFIER    

vrIpRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.1
This entry controls the addition and deletion of vrIp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRowStatusEntry

vrIpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.1.1
A single entry in the table represents a single vrIp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRowStatusEntry  

vrIpRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.1.1.1
This variable is used as the basis for SNMP naming of vrIp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpComponentName 1.3.6.1.4.1.562.2.4.1.100.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpStorageType 1.3.6.1.4.1.562.2.4.1.100.6.1.1.4
This variable represents the storage type value for the vrIp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpIndex 1.3.6.1.4.1.562.2.4.1.100.6.1.1.10
This variable represents the index for the vrIp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpProvTable 1.3.6.1.4.1.562.2.4.1.100.6.100
This group contains global attributes for IP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpProvEntry

vrIpProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.100.1
An entry in the vrIpProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpProvEntry  

vrIpForwarding 1.3.6.1.4.1.562.2.4.1.100.6.100.1.2
This attribute indicates whether or not this VR is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this VR
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER gateway(1)  

vrIpDefaultTtl 1.3.6.1.4.1.562.2.4.1.100.6.100.1.3
This attribute is the default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a Time- To-Live value is not supplied by the transport layer protocol. The value of this attribute deviates from the MIB requirement that it will always have a value of 255.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 255..255  

vrIpCosPolicyAssignment 1.3.6.1.4.1.562.2.4.1.100.6.100.1.4
This attribute specifies the default cosPolicyGroup component that is associated with the IpPort of every protocol port on the vrirtual router. An individual IpPort can override this default using its own cosPolicyAssignment attribute. If this attribute is empty, CoS policy groups are assigned to only those IP ports where the cosPolicyAssignment attribute under the IpPort component is non-empty.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

vrIpStatsTable 1.3.6.1.4.1.562.2.4.1.100.6.101
This is the GROUP holding the struct which contains statistical attributes for IP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpStatsEntry

vrIpStatsEntry 1.3.6.1.4.1.562.2.4.1.100.6.101.1
An entry in the vrIpStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpStatsEntry  

vrIpInReceives 1.3.6.1.4.1.562.2.4.1.100.6.101.1.1
This is the number of input datagrams received from the interfaces, including those received in error . inReceives wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpInHdrErrors 1.3.6.1.4.1.562.2.4.1.100.6.101.1.2
The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc. inHdrErrors wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpInAddrErrors 1.3.6.1.4.1.562.2.4.1.100.6.101.1.3
The number of input datagrams discarded due to errors such as invalid address, unsupported address class. inAddrErrors wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpForwDatagrams 1.3.6.1.4.1.562.2.4.1.100.6.101.1.4
The number of input datagrams for which this router was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. forwDatagrams wraps to zero if reaches it's maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpInUnknownProtos 1.3.6.1.4.1.562.2.4.1.100.6.101.1.5
The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol inUnknownProtos wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpInDiscards 1.3.6.1.4.1.562.2.4.1.100.6.101.1.6
The number of input datagrams for which no problems were encountered to prevent their continued processing, but which were discarded due to the lack of buffers. This does not include any datagram discarded while awaiting for re-assembly. inDiscards wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpInDelivers 1.3.6.1.4.1.562.2.4.1.100.6.101.1.7
The number of input datagrams successfully delivered to IP user- protocols (including ICMP). inDelivers wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpOutRequests 1.3.6.1.4.1.562.2.4.1.100.6.101.1.8
The number of datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. This sum does not include datagrams counted in ForwDatagrams. outRequests wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpOutDiscards 1.3.6.1.4.1.562.2.4.1.100.6.101.1.9
The number of outbound datagrams that were discarded due to the lack of buffers. This sum also includes datagrams counted in forwDatagrams if any such packets met the discard criterion. outDiscards wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpOutNoRoutes 1.3.6.1.4.1.562.2.4.1.100.6.101.1.10
The number of outbound datagrams discarded because no route could be found to transmit them to their destination. This counter includes any datagrams counted in forwDatagrams. outNoRoutes wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpReasmTimeOut 1.3.6.1.4.1.562.2.4.1.100.6.101.1.11
The maximum number of seconds, which received fragments are held while they are awaiting reassembly at this gateway.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5  

vrIpReasmReqds 1.3.6.1.4.1.562.2.4.1.100.6.101.1.12
The number of the IP fragments received by this gateway which needed to be reassembled. reasmReqds wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpReasmOks 1.3.6.1.4.1.562.2.4.1.100.6.101.1.13
The number of IP fragments successfully reassembled by this gateway. reasmOks wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpReasmFails 1.3.6.1.4.1.562.2.4.1.100.6.101.1.14
The number of times this gateway is unabled to assemble IP-fragments for whatever reasons. reasmFails wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpFragOks 1.3.6.1.4.1.562.2.4.1.100.6.101.1.15
The number of IP datagrams that have been successfully fragmented by this gateway. fragOks wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpFragFails 1.3.6.1.4.1.562.2.4.1.100.6.101.1.16
The number of IP-fragments that have been discarded because they needed to be fragmented but could not be. For example, their Don't Fragment flag was set. fragFails wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpFragCreates 1.3.6.1.4.1.562.2.4.1.100.6.101.1.17
This number of IP fragments that have been generated as a result of fragmentation by this gateway. fragCreates wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpRoutingDiscards 1.3.6.1.4.1.562.2.4.1.100.6.101.1.18
The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free -up buffer space for other routing entries. In this implementation, this number is always zero because IP never deletes a valid routing entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpAdminControlTable 1.3.6.1.4.1.562.2.4.1.100.6.102
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpAdminControlEntry

vrIpAdminControlEntry 1.3.6.1.4.1.562.2.4.1.100.6.102.1
An entry in the vrIpAdminControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpAdminControlEntry  

vrIpSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.6.102.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpStateTable 1.3.6.1.4.1.562.2.4.1.100.6.104
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpStateEntry

vrIpStateEntry 1.3.6.1.4.1.562.2.4.1.100.6.104.1
An entry in the vrIpStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpStateEntry  

vrIpAdminState 1.3.6.1.4.1.562.2.4.1.100.6.104.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrIpOperationalState 1.3.6.1.4.1.562.2.4.1.100.6.104.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpUsageState 1.3.6.1.4.1.562.2.4.1.100.6.104.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrIpOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.107
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOperStatusEntry

vrIpOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.107.1
An entry in the vrIpOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOperStatusEntry  

vrIpSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.6.107.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpCtsTable 1.3.6.1.4.1.562.2.4.1.100.6.394
This attribute specifies the maximum number of entries that can exist in the IP local cache table on each LP. This attribute provides a way to control the resources allocated to the IP cache tables. The default cache table size is 3000 for an FP and 100 for a CP, is used if this attribute is not specified explicitly. The attribute value must be multiple of 100.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpCtsEntry

vrIpCtsEntry 1.3.6.1.4.1.562.2.4.1.100.6.394.1
An entry in the vrIpCtsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpCtsEntry  

vrIpCtsIndex 1.3.6.1.4.1.562.2.4.1.100.6.394.1.1
This variable represents the vrIpCtsTable specific index for the vrIpCtsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..15  

vrIpCtsValue 1.3.6.1.4.1.562.2.4.1.100.6.394.1.2
This variable represents an individual value for the vrIpCtsTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 100..8000  

vrIpFwd 1.3.6.1.4.1.562.2.4.1.100.6.3
OBJECT IDENTIFIER    

vrIpFwdRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.3.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpFwd components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpFwdRowStatusEntry

vrIpFwdRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.3.1.1
A single entry in the table represents a single vrIpFwd component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpFwdRowStatusEntry  

vrIpFwdRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.3.1.1.1
This variable is used as the basis for SNMP naming of vrIpFwd components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpFwdComponentName 1.3.6.1.4.1.562.2.4.1.100.6.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpFwdStorageType 1.3.6.1.4.1.562.2.4.1.100.6.3.1.1.4
This variable represents the storage type value for the vrIpFwd tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpFwdDestAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.3.1.1.10
This variable represents an index for the vrIpFwd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpFwdDestMaskIndex 1.3.6.1.4.1.562.2.4.1.100.6.3.1.1.11
This variable represents an index for the vrIpFwd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpFwdTypeOfServiceIndex 1.3.6.1.4.1.562.2.4.1.100.6.3.1.1.12
This variable represents an index for the vrIpFwd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..31  

vrIpFwdGatewayIndex 1.3.6.1.4.1.562.2.4.1.100.6.3.1.1.13
This variable represents an index for the vrIpFwd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpFwdOperTable 1.3.6.1.4.1.562.2.4.1.100.6.3.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Identifies a group of operational attributes associated with each entry in the Forward Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpFwdOperEntry

vrIpFwdOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.3.10.1
An entry in the vrIpFwdOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpFwdOperEntry  

vrIpFwdIfIndex 1.3.6.1.4.1.562.2.4.1.100.6.3.10.1.1
This attribute specifies the SNMP index associated with the protocol port represented by the attribute protocolPortName, which identifies the local interface through which the next hop of this route should be reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex 1..65535  

vrIpFwdType 1.3.6.1.4.1.562.2.4.1.100.6.3.10.1.2
Specifies the type of the route,
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notDefined(1), invalid(2), localInterface(3), remoteDestination(4)  

vrIpFwdProtocol 1.3.6.1.4.1.562.2.4.1.100.6.3.10.1.3
This Attribute identifies the routing mechanism by which this route was learned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), isIs(9), esIs(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14), idpr(15)  

vrIpFwdAge 1.3.6.1.4.1.562.2.4.1.100.6.3.10.1.4
This attribute specifies the number of seconds since this route was last updated or otherwise determined to be correct.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

vrIpFwdProtocolPortName 1.3.6.1.4.1.562.2.4.1.100.6.3.10.1.5
Indicates the name of the protocol port by which the next hop of this route should be reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

vrIpFwdNextHopAs 1.3.6.1.4.1.562.2.4.1.100.6.3.10.1.7
This attribute specifies the Autonomous System number of the Next Hop. If unknown or not relevant to the protocol indicated by the attribute protocol, the value should be zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..429467295  

vrIpFwdMetric 1.3.6.1.4.1.562.2.4.1.100.6.3.10.1.8
This attribute specifies the primary routing metric for this route. The semantics of this metric are determined by the routing protocol specified by the value of the attribute protocol. If this metric is not used, its value should be set to -1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..65535  

vrIpRdb 1.3.6.1.4.1.562.2.4.1.100.6.4
OBJECT IDENTIFIER    

vrIpRdbRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.4.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpRdb components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRdbRowStatusEntry

vrIpRdbRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.4.1.1
A single entry in the table represents a single vrIpRdb component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRdbRowStatusEntry  

vrIpRdbRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.4.1.1.1
This variable is used as the basis for SNMP naming of vrIpRdb components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpRdbComponentName 1.3.6.1.4.1.562.2.4.1.100.6.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpRdbStorageType 1.3.6.1.4.1.562.2.4.1.100.6.4.1.1.4
This variable represents the storage type value for the vrIpRdb tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpRdbDestAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.4.1.1.10
This variable represents an index for the vrIpRdb tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpRdbDestMaskIndex 1.3.6.1.4.1.562.2.4.1.100.6.4.1.1.11
This variable represents an index for the vrIpRdb tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpRdbProtocolIndex 1.3.6.1.4.1.562.2.4.1.100.6.4.1.1.12
This variable represents an index for the vrIpRdb tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER bogus(1), local(2), remote(3), special(4), ospf(5), ospfExternal(6), ospfType3Discard(7), ospfType7Discard(8), rip(9), ripDiscard(10), egp(11), bgpExternal(12), bgpInternal(13), bgpAggrDiscard(14), redistrib(15)  

vrIpRdbGatewayIndex 1.3.6.1.4.1.562.2.4.1.100.6.4.1.1.13
This variable represents an index for the vrIpRdb tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpRdbOperTable 1.3.6.1.4.1.562.2.4.1.100.6.4.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Identifies a group of operational attributes associated with each entry in the routing database.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRdbOperEntry

vrIpRdbOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.4.10.1
An entry in the vrIpRdbOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRdbOperEntry  

vrIpRdbMetric 1.3.6.1.4.1.562.2.4.1.100.6.4.10.1.1
This attribute specifies the primary routing metric for this route. The semantics of this metric are determined by the routing protocol specified by the value of the index to this entry protocol. If this metric is not used, its value should be set to -1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..65535  

vrIpRdbPreference 1.3.6.1.4.1.562.2.4.1.100.6.4.10.1.2
This attribute specifies the the preference value of this particular entry. The value of this attribute affects the way the routeEntries in this database are selected for installing it in the forwardingTable. The lower the preference value of this entry, the higher are the chances that this entry will be selected to install in the ForwardTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

vrIpRdbAge 1.3.6.1.4.1.562.2.4.1.100.6.4.10.1.3
This attribute specifies the number of seconds since this route was last updated or otherwise determined to be correct.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

vrIpIf 1.3.6.1.4.1.562.2.4.1.100.6.5
OBJECT IDENTIFIER    

vrIpIfRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.5.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpIf components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpIfRowStatusEntry

vrIpIfRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.5.1.1
A single entry in the table represents a single vrIpIf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpIfRowStatusEntry  

vrIpIfRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.5.1.1.1
This variable is used as the basis for SNMP naming of vrIpIf components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpIfComponentName 1.3.6.1.4.1.562.2.4.1.100.6.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpIfStorageType 1.3.6.1.4.1.562.2.4.1.100.6.5.1.1.4
This variable represents the storage type value for the vrIpIf tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpIfInterfaceAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.5.1.1.10
This variable represents the index for the vrIpIf tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpIfOperTable 1.3.6.1.4.1.562.2.4.1.100.6.5.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Identifies a group of operational attributes associated with each entry in the Ip interface table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpIfOperEntry

vrIpIfOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.5.10.1
An entry in the vrIpIfOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpIfOperEntry  

vrIpIfInterfaceMask 1.3.6.1.4.1.562.2.4.1.100.6.5.10.1.1
This attribute indicates the mask for this interface entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vrIpIfStatus 1.3.6.1.4.1.562.2.4.1.100.6.5.10.1.2
This attribute specifies the status of the provisioned Ip logicalInterface entry. A value of disabled is used when the parent components Vr, Ip or ipPort is in a disabled state. A value of up is used when the interface is in an operational state. A state of down is used if the media associated with this interface is not ready or disabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), disabled(3)  

vrIpIfPPName 1.3.6.1.4.1.562.2.4.1.100.6.5.10.1.3
Indicates the name of the protocol port this logicalIfEntry belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..23)  

vrIpIfMediaType 1.3.6.1.4.1.562.2.4.1.100.6.5.10.1.4
This attribute indicates the media type of interface. When the interface is down, a value of none indicates the media stays down from the beginning. When the interface is down, a value of some valid media type indicates the media is brought down after it was up. Otherwise, when the interface is up or disabled, this attribute should reflect the proper media type of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), tokenRing(2), ethernet(3), fddi(4), x25(5), frameRelay(6), ppp(7), clusterBridge(8), virtualLink(9), vcpEther(10), vcpToken(11), vns(12), smds(13), atmMpeVcEncap(14), atmMpeLlcEncap(15), lecEther(16), lecToken(17), tunnel(18), virtual(19)  

vrIpIfHardwareAddress 1.3.6.1.4.1.562.2.4.1.100.6.5.10.1.5
This attribute specifies the hardware address of the media in canonical form if applicable. The non-canonical version of this address is indicated in ncHardwareAddress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DashedHexString Size(0..8)  

vrIpIfMtu 1.3.6.1.4.1.562.2.4.1.100.6.5.10.1.6
This attribute specifies the maximum transmission unit applicable for this logicalInterface. A value of 0 is used for the interfaces where all the necessary information is not available to compute the mtu applicable for this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..0 | 576..18944  

vrIpIfBroadcastAddress 1.3.6.1.4.1.562.2.4.1.100.6.5.10.1.7
This attribute indicates the destination IP address to be used by any application which needs to broadcast on this interface. The value is determined by the corresponding LogicalIf component's broadcastAddress attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vrIpIfNcHardwareAddress 1.3.6.1.4.1.562.2.4.1.100.6.5.10.1.8
This attribute is the non-canonical version of hardwareAddress. This attribute is not displayed for interfaces on non-LAN media.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DashedHexString Size(0..8)  

vrIpEgp 1.3.6.1.4.1.562.2.4.1.100.6.6
OBJECT IDENTIFIER    

vrIpEgpRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.6.1
This entry controls the addition and deletion of vrIpEgp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpRowStatusEntry

vrIpEgpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.1.1
A single entry in the table represents a single vrIpEgp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpRowStatusEntry  

vrIpEgpRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.6.1.1.1
This variable is used as the basis for SNMP naming of vrIpEgp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpEgpComponentName 1.3.6.1.4.1.562.2.4.1.100.6.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpEgpStorageType 1.3.6.1.4.1.562.2.4.1.100.6.6.1.1.4
This variable represents the storage type value for the vrIpEgp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpEgpIndex 1.3.6.1.4.1.562.2.4.1.100.6.6.1.1.10
This variable represents the index for the vrIpEgp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpEgpProvTable 1.3.6.1.4.1.562.2.4.1.100.6.6.10
This group contains the provisionable attributes for the EGP component
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpProvEntry

vrIpEgpProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.10.1
An entry in the vrIpEgpProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpProvEntry  

vrIpEgpAsId 1.3.6.1.4.1.562.2.4.1.100.6.6.10.1.2
The autonomous system identifier for this EGP entity. The value of this asId can not be equal to the value of EgpNeighborEntry asId.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

vrIpEgpDefaultHelloInterval 1.3.6.1.4.1.562.2.4.1.100.6.6.10.1.3
This attribute is used to configure the default hello interval for each neighbor. This attribute's value is used by the application for each EgpNeighbor whose helloInterval has not been set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 30..900  

vrIpEgpDefaultPollInterval 1.3.6.1.4.1.562.2.4.1.100.6.6.10.1.4
This attribute is used to configure the default polling interval for the EGP Neighbor. This attribute's value is used by the application for each EgpNeighbor whose pollInterval has not been set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 120..3600  

vrIpEgpMaxNatNets 1.3.6.1.4.1.562.2.4.1.100.6.6.10.1.5
This attribute is used to configure the maximum number of external natural networks this virtual router will be advertising via EGP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

vrIpEgpMaxBufferSize 1.3.6.1.4.1.562.2.4.1.100.6.6.10.1.6
This attribute specifies the maximum buffer size (in 1024 byte memory blocks) to be used for an EGP update to be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 2..16  

vrIpEgpStatsTable 1.3.6.1.4.1.562.2.4.1.100.6.6.11
These set of attributes identifies the statistics for the EGP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpStatsEntry

vrIpEgpStatsEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.11.1
An entry in the vrIpEgpStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpStatsEntry  

vrIpEgpInMsgs 1.3.6.1.4.1.562.2.4.1.100.6.6.11.1.1
Identifies the number of EGP messages received without error. This counter will wraparound once the value reaches the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpEgpInErrorMsgs 1.3.6.1.4.1.562.2.4.1.100.6.6.11.1.2
Identifies the sum of EGP error messages from all the neighbors. This counter will wraparound once the value reaches the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpEgpOutErrorMsgs 1.3.6.1.4.1.562.2.4.1.100.6.6.11.1.3
Indicates the sum of Egp error messages sent to all the neighbors. This counter will wraparound once the value reaches the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpEgpInErrors 1.3.6.1.4.1.562.2.4.1.100.6.6.11.1.4
Identifies the number of EGP messages that proved to be in error. This counter will wraparound once the value reaches the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpEgpOutMsgs 1.3.6.1.4.1.562.2.4.1.100.6.6.11.1.5
The total number of locally generated EGP messages. This counter will wraparound once the value reaches the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpEgpOutErrors 1.3.6.1.4.1.562.2.4.1.100.6.6.11.1.6
The number of EGP messages that were locally generated but were not sent out due to resource limitations within an EGP entity.This counter will wraparound once the value reaches the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpEgpStateTable 1.3.6.1.4.1.562.2.4.1.100.6.6.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpStateEntry

vrIpEgpStateEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.12.1
An entry in the vrIpEgpStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpStateEntry  

vrIpEgpAdminState 1.3.6.1.4.1.562.2.4.1.100.6.6.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrIpEgpOperationalState 1.3.6.1.4.1.562.2.4.1.100.6.6.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpEgpUsageState 1.3.6.1.4.1.562.2.4.1.100.6.6.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrIpEgpAdminControlTable 1.3.6.1.4.1.562.2.4.1.100.6.6.13
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpAdminControlEntry

vrIpEgpAdminControlEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.13.1
An entry in the vrIpEgpAdminControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpAdminControlEntry  

vrIpEgpSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.6.6.13.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpEgpOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.6.16
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpOperStatusEntry

vrIpEgpOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.16.1
An entry in the vrIpEgpOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpOperStatusEntry  

vrIpEgpSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.6.6.16.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpEgpNbr 1.3.6.1.4.1.562.2.4.1.100.6.6.2
OBJECT IDENTIFIER    

vrIpEgpNbrRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.6.2.1
This entry controls the addition and deletion of vrIpEgpNbr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpNbrRowStatusEntry

vrIpEgpNbrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.2.1.1
A single entry in the table represents a single vrIpEgpNbr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpNbrRowStatusEntry  

vrIpEgpNbrRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.6.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpEgpNbr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpEgpNbrComponentName 1.3.6.1.4.1.562.2.4.1.100.6.6.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpEgpNbrStorageType 1.3.6.1.4.1.562.2.4.1.100.6.6.2.1.1.4
This variable represents the storage type value for the vrIpEgpNbr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpEgpNbrNeighborAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.6.2.1.1.10
This variable represents the index for the vrIpEgpNbr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpEgpNbrProvTable 1.3.6.1.4.1.562.2.4.1.100.6.6.2.10
This group of attributes identify the provisionable attributes for this EGP neighbor.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpNbrProvEntry

vrIpEgpNbrProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.2.10.1
An entry in the vrIpEgpNbrProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpNbrProvEntry  

vrIpEgpNbrAsId 1.3.6.1.4.1.562.2.4.1.100.6.6.2.10.1.1
The autonomous system identifier of this EGP peer. The value of this neighbor's asId should not be equal to the asId value of Egp entity
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

vrIpEgpNbrMode 1.3.6.1.4.1.562.2.4.1.100.6.6.2.10.1.2
This attribute will indicate whether this neighbor is being configured as an active or passive neighbor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), passive(2)  

vrIpEgpNbrGenerateDefaultRoute 1.3.6.1.4.1.562.2.4.1.100.6.6.2.10.1.3
This attribute distinguishes whether or not the default route should be generated. This route is put in the EGP update along with the normal EGP update routes when updates are sent to this EGP neighbor
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

vrIpEgpNbrDefaultRouteMetric 1.3.6.1.4.1.562.2.4.1.100.6.6.2.10.1.4
This attribute identifies the Metric to be used for propagating the 'Default Route'. The value of defaultRouteMetric is used only in the case where the value of the attribute generateDefaultRoute is set to yes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

vrIpEgpNbrDefaultMetric 1.3.6.1.4.1.562.2.4.1.100.6.6.2.10.1.5
This attribute identifies the default metric value for routes that are exported to this EgpNeighbor. This value is used when exporting routes to this neighbor and no Export policy applies a different metric.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

vrIpEgpNbrHelloInterval 1.3.6.1.4.1.562.2.4.1.100.6.6.2.10.1.6
This attribute identifies the interval in seconds, between EGP hello command retransmissions. This is the P1 timer in the RFC904. This value may change in operation due to negotiations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 30..120  

vrIpEgpNbrPollInterval 1.3.6.1.4.1.562.2.4.1.100.6.6.2.10.1.7
This attribute identifies the interval in seconds, between EGP poll command retransmissions. This is the P2 timer in the RFC904. This value may change in operation due to negotiations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 120..480  

vrIpEgpNbrOperTable 1.3.6.1.4.1.562.2.4.1.100.6.6.2.11
This group of attributes identifies the operational set of attributes for the NeighborEntry component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpNbrOperEntry

vrIpEgpNbrOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.2.11.1
An entry in the vrIpEgpNbrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpNbrOperEntry  

vrIpEgpNbrState 1.3.6.1.4.1.562.2.4.1.100.6.6.2.11.1.1
This attribute describes the state of the local system with respect to this entry's EGP Neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), acquisition(2), down(3), up(4), cease(5)  

vrIpEgpNbrInMsgs 1.3.6.1.4.1.562.2.4.1.100.6.6.2.11.1.2
The number of EGP messages received without error from the EGP peer. This counter will wraparound once the value reaches the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpEgpNbrInErrors 1.3.6.1.4.1.562.2.4.1.100.6.6.2.11.1.3
The number of messages received from this EGP peer that proved to be in error. This counter will wraparound once the value reaches the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpEgpNbrOutMsgs 1.3.6.1.4.1.562.2.4.1.100.6.6.2.11.1.4
The number of locally generated EGP messages for this EGP peer. This counter will wraparound once the value reaches the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpEgpNbrOutErrors 1.3.6.1.4.1.562.2.4.1.100.6.6.2.11.1.5
The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity.This counter will wraparound once the value reaches the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpEgpNbrInErrorMsgs 1.3.6.1.4.1.562.2.4.1.100.6.6.2.11.1.6
The number of EGP-defined error messages received from this EGP peer.This counter will wraparound once the value reaches the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpEgpNbrOutErrorMsgs 1.3.6.1.4.1.562.2.4.1.100.6.6.2.11.1.7
The number of EGP-defined error messages sent to this EGP peer.This counter will wraparound once the value reaches the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpEgpNbrStateUps 1.3.6.1.4.1.562.2.4.1.100.6.6.2.11.1.8
The number of EGP state transitions to the UP state with this EGP peer. This counter will wraparound once the value reaches the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpEgpNbrStateDowns 1.3.6.1.4.1.562.2.4.1.100.6.6.2.11.1.9
The number of EGP state transitions from the UP state to any other state with this EGP peer. This counter will wraparound once the value reaches the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpEgpNbrEventTrigger 1.3.6.1.4.1.562.2.4.1.100.6.6.2.11.1.10
This attribute is used to control the state of the Neighbor. It is not allowed to change. This attribute from SNMP perspective deviates from MIB that it is made READONLY.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER start(1), stop(2)  

vrIpEgpImport 1.3.6.1.4.1.562.2.4.1.100.6.6.3
OBJECT IDENTIFIER    

vrIpEgpImportRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.6.3.1
This entry controls the addition and deletion of vrIpEgpImport components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpImportRowStatusEntry

vrIpEgpImportRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.3.1.1
A single entry in the table represents a single vrIpEgpImport component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpImportRowStatusEntry  

vrIpEgpImportRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.6.3.1.1.1
This variable is used as the basis for SNMP naming of vrIpEgpImport components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpEgpImportComponentName 1.3.6.1.4.1.562.2.4.1.100.6.6.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpEgpImportStorageType 1.3.6.1.4.1.562.2.4.1.100.6.6.3.1.1.4
This variable represents the storage type value for the vrIpEgpImport tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpEgpImportIndex 1.3.6.1.4.1.562.2.4.1.100.6.6.3.1.1.10
This variable represents the index for the vrIpEgpImport tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

vrIpEgpImportProvTable 1.3.6.1.4.1.562.2.4.1.100.6.6.3.10
These set of attributes describe the provisionable attributes for the import component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpImportProvEntry

vrIpEgpImportProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.3.10.1
An entry in the vrIpEgpImportProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpImportProvEntry  

vrIpEgpImportUsageFlag 1.3.6.1.4.1.562.2.4.1.100.6.6.3.10.1.1
This flag will determine whether or not EGP will use or ignore information in updates received. If the attribute nbrAsId is not specified or any of the NetworkList components are not added, then this attribute when set to ignore will ignore all incoming information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER use(1), ignore(2)  

vrIpEgpImportImportMetric 1.3.6.1.4.1.562.2.4.1.100.6.6.3.10.1.2
This attribute is used to set the metric value to be included in the routing table for any routes sent because this particular import instance was it's 'best match' policy. However this attribute is not a selection key. It should not use or ignore a particular metric value. If the value for this attribute is not specified, then the metric value received in an Egp update will be used. Note: When setting this value, caution should be taken to set the metric value in all relevant Import components to make sure that all matching policies for a given route have the same metric set. This will insure that there are no situations where a specific metric was desired, but doesn't get used in the update because the 'best match' policy for that situation did not set the metric parameter. If the attribute usageFlag for this import policy is set to ignore, then the importMetric value will be ignored by the application. The importMetric value is not used to select which routes to use or ignore but is used to set the metric value for the routes being imported. A value of zero indicates that the metric received in the update will be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

vrIpEgpImportNbrAsId 1.3.6.1.4.1.562.2.4.1.100.6.6.3.10.1.3
The autonomous system Id this import policy will apply to. Note: The Valid value of an asId is from 1 to 65,535. This attribute's value when set to 0 will be ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

vrIpEgpImportNet 1.3.6.1.4.1.562.2.4.1.100.6.6.3.2
OBJECT IDENTIFIER    

vrIpEgpImportNetRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.6.3.2.1
This entry controls the addition and deletion of vrIpEgpImportNet components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpImportNetRowStatusEntry

vrIpEgpImportNetRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.3.2.1.1
A single entry in the table represents a single vrIpEgpImportNet component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpImportNetRowStatusEntry  

vrIpEgpImportNetRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.6.3.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpEgpImportNet components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpEgpImportNetComponentName 1.3.6.1.4.1.562.2.4.1.100.6.6.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpEgpImportNetStorageType 1.3.6.1.4.1.562.2.4.1.100.6.6.3.2.1.1.4
This variable represents the storage type value for the vrIpEgpImportNet tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpEgpImportNetIndex 1.3.6.1.4.1.562.2.4.1.100.6.6.3.2.1.1.10
This variable represents the index for the vrIpEgpImportNet tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

vrIpEgpImportNetProvTable 1.3.6.1.4.1.562.2.4.1.100.6.6.3.2.10
This group identifies attributes for the NetworkList component for which the import policy will be applied to
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpImportNetProvEntry

vrIpEgpImportNetProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.3.2.10.1
An entry in the vrIpEgpImportNetProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpImportNetProvEntry  

vrIpEgpImportNetIpAddress 1.3.6.1.4.1.562.2.4.1.100.6.6.3.2.10.1.1
This attribute identifies the IP address that needs to be matched against in this network list for the Import policy to be applied to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpEgpExport 1.3.6.1.4.1.562.2.4.1.100.6.6.4
OBJECT IDENTIFIER    

vrIpEgpExportRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.6.4.1
This entry controls the addition and deletion of vrIpEgpExport components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpExportRowStatusEntry

vrIpEgpExportRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.4.1.1
A single entry in the table represents a single vrIpEgpExport component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpExportRowStatusEntry  

vrIpEgpExportRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.6.4.1.1.1
This variable is used as the basis for SNMP naming of vrIpEgpExport components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpEgpExportComponentName 1.3.6.1.4.1.562.2.4.1.100.6.6.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpEgpExportStorageType 1.3.6.1.4.1.562.2.4.1.100.6.6.4.1.1.4
This variable represents the storage type value for the vrIpEgpExport tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpEgpExportIndex 1.3.6.1.4.1.562.2.4.1.100.6.6.4.1.1.10
This variable represents the index for the vrIpEgpExport tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

vrIpEgpExportProvTable 1.3.6.1.4.1.562.2.4.1.100.6.6.4.10
This group contains all the provisioned attributes for the Export component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpExportProvEntry

vrIpEgpExportProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.4.10.1
An entry in the vrIpEgpExportProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpExportProvEntry  

vrIpEgpExportAdvertiseStatus 1.3.6.1.4.1.562.2.4.1.100.6.6.4.10.1.1
This attribute specifies if the routes that match this export policy are advertised (send) or not advertised (block).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER send(1), block(2)  

vrIpEgpExportExportMetric 1.3.6.1.4.1.562.2.4.1.100.6.6.4.10.1.2
This attribute specifies the metric to be used on the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of exportMetric is ignored. The exportMetric value is not used to select which routes to block or send, but rather the metric value advertised for the routes. A value of 0 indicates that the metric associated with the route in the forwarding table is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

vrIpEgpExportProtocol 1.3.6.1.4.1.562.2.4.1.100.6.6.4.10.1.3
This attribute specifies the routes to which this export policy applies based on the routing protocol of how the routes are learned. If it is set to all, this export policy applies to all routes in the forwarding table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER all(1), egp(2), rip(3), ospfInternal(4), ospfExternal(5), staticLocal(6), staticRemote(7)  

vrIpEgpExportRipInterface 1.3.6.1.4.1.562.2.4.1.100.6.6.4.10.1.4
This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP interface from which the routes are learned. This attribute can only be non zero when the protocol is set to rip. The value of 0.0.0.0 implies any RIP interface on the same virtual router; otherwise the value of this attribute must match the interface address of a LogicalIf that has a RipIf on the same virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpEgpExportRipNeighbor 1.3.6.1.4.1.562.2.4.1.100.6.6.4.10.1.5
This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP neighbor of which the routes are learned from. This attribute can only be non zero when the protocol is set to rip. The value of 0.0.0.0 implies any RIP neighbor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpEgpExportInEgpAsId 1.3.6.1.4.1.562.2.4.1.100.6.6.4.10.1.6
This attribute specifies the EGP learned routes to which this export policy applies, based on the EGP autonomous system identifier of which the routes are learned from. This attribute can only be non zero when protocol is set to egp. The value of 0 implies any EGP autonomous system; otherwise the value of this attribute must match the asId of an EGP neighbor on the same virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

vrIpEgpExportOspfTag 1.3.6.1.4.1.562.2.4.1.100.6.6.4.10.1.7
This attribute specifies the OSPF learned external routes to which this export policy applies, based on the learned OSPF tag of the routes. This attribute can only be set to a non default value when protocol is set to ospfExternal. The value of 4294967295 implies any tag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpEgpExportOutAutonomousSystem 1.3.6.1.4.1.562.2.4.1.100.6.6.4.10.1.8
This attribute specifies the EGP autonomous system to which routes are exported to as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of outAutonomousSystem is ignored. The outAutonomousSystem value is not used to select which routes to block or send but where to export the routes. A value of 0 indicates that the routes are exported to all EGP autonomous systems of which the virtual router is a neighbor. Otherwise, the value of this attribute must match the asId of an EGP neighbor on the same virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

vrIpEgpExportNet 1.3.6.1.4.1.562.2.4.1.100.6.6.4.2
OBJECT IDENTIFIER    

vrIpEgpExportNetRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.6.4.2.1
This entry controls the addition and deletion of vrIpEgpExportNet components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpExportNetRowStatusEntry

vrIpEgpExportNetRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.4.2.1.1
A single entry in the table represents a single vrIpEgpExportNet component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpExportNetRowStatusEntry  

vrIpEgpExportNetRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.6.4.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpEgpExportNet components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpEgpExportNetComponentName 1.3.6.1.4.1.562.2.4.1.100.6.6.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpEgpExportNetStorageType 1.3.6.1.4.1.562.2.4.1.100.6.6.4.2.1.1.4
This variable represents the storage type value for the vrIpEgpExportNet tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpEgpExportNetIndex 1.3.6.1.4.1.562.2.4.1.100.6.6.4.2.1.1.10
This variable represents the index for the vrIpEgpExportNet tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

vrIpEgpExportNetProvTable 1.3.6.1.4.1.562.2.4.1.100.6.6.4.2.10
This group identifies the set of provisionable attributes for the ExportNetworkList component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpEgpExportNetProvEntry

vrIpEgpExportNetProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.6.4.2.10.1
An entry in the vrIpEgpExportNetProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpEgpExportNetProvEntry  

vrIpEgpExportNetIpAddress 1.3.6.1.4.1.562.2.4.1.100.6.6.4.2.10.1.1
This attribute identifies the 32 bit IP address to match against.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpOspf 1.3.6.1.4.1.562.2.4.1.100.6.7
OBJECT IDENTIFIER    

vrIpOspfRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.7.1
This entry controls the addition and deletion of vrIpOspf components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfRowStatusEntry

vrIpOspfRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.1.1
A single entry in the table represents a single vrIpOspf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfRowStatusEntry  

vrIpOspfRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.1.1.1
This variable is used as the basis for SNMP naming of vrIpOspf components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpOspfComponentName 1.3.6.1.4.1.562.2.4.1.100.6.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpOspfStorageType 1.3.6.1.4.1.562.2.4.1.100.6.7.1.1.4
This variable represents the storage type value for the vrIpOspf tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpOspfIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.1.1.10
This variable represents the index for the vrIpOspf tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpOspfProvTable 1.3.6.1.4.1.562.2.4.1.100.6.7.100
This group of attributes are used to configure the OSPF component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfProvEntry

vrIpOspfProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.100.1
An entry in the vrIpOspfProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfProvEntry  

vrIpOspfRouterId 1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.1
This attribute is an Ip Address that uniquely identifies the router in the autonomous system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RouterID  

vrIpOspfSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.2
The administrative status of the OSPF Component in this Virtual Router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpOspfAsBdrRtrStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.3
This attribute is a flag to note whether this router is an autonomous system border router. If this router is configured to export any routes learned from other than OSPF-internal protocol, this attribute should be configured as autonomous system border router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

vrIpOspfTosSupport 1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.4
The router's support for type-of-service routing. Only one value will be allowed. This is a deviation from supporting the MIB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(2)  

vrIpOspfExtLsdbLimit 1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.5
The maximum number of external link-state entries that can be stored in the link-state database. If the value is -1, then there is no limit, that is the maximum number of external OSPF routes that this autonomous system border router will originate. It will begin to flush LSA(Link State Advertisement)s, if an ASBR might receive bursts of external routes (for example, a regional network), then the parameter should be configured to a reasonable level. If there are less than two thousand routes and large bursts are unlikely, then the default should be adequate. This parameter will not affect the number of external OSPF routes a router will store in it's database.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1..2147483647  

vrIpOspfMulticastForward 1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.6
A bit mask indicating the limits on Network Layer Multicast(class D) forwarding. It is represented as a sum of the following: if intra-Area forwarding is permitted, 1; else 0 if inter-Area forwarding is permitted 2; else 0 if inter-AS forwarding is permitted, 4; else 0 Only the value of 0 is being supported and this is a MIB deviation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..0  

vrIpOspfMigrateRip 1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.7
This Attribute sets the preference level of OSPF-internal routes to be less preferred than RIP. This Parameter should only be used when starting migration of network from RIP to OSPF. When ready to cutover to OSPF, set this attribute disabled and run under normal preferences. All OSPF routers in the Autonomous System should be running with migraterip enabled or with migraterip disabled to prevent routing loops. It is important that the changeover period from RIP to OSPF be performed quickly on all OSPF routers so that no routing loops are formed. These routing loops could be caused by conflicts in the internal RIP and OSPF databases.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrIpOspfGenerateDefaultRouteMetric 1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.8
If this router is configured as an autonomous system border router, then this attribute causes the default route to be generated with a metric value equal to generateDefaultRouteMetric value. This route is put in the OSPF update along with the normal update routes when updates are sent to the neighbors. No default route will be generated if the value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1..65535  

vrIpOspfOperTable 1.3.6.1.4.1.562.2.4.1.100.6.7.101
These group of attributes identifies the operational attributes for this OSPF Component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfOperEntry

vrIpOspfOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.101.1
An entry in the vrIpOspfOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfOperEntry  

vrIpOspfVersionNumber 1.3.6.1.4.1.562.2.4.1.100.6.7.101.1.1
The Current Version number of the OSPF Protocol. (2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 2..2  

vrIpOspfAreaBdrRtrStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.101.1.2
This attribute is used to specify whether this router is configured as an area border router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

vrIpOspfExternLsaCount 1.3.6.1.4.1.562.2.4.1.100.6.7.101.1.3
The number of external (LS type 5) link-state advertisements in the link- state database.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

vrIpOspfExternLsaChecksumSum 1.3.6.1.4.1.562.2.4.1.100.6.7.101.1.4
The 32-bit unsigned sum of the LS checksums of the external link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpOspfOriginateNewLsas 1.3.6.1.4.1.562.2.4.1.100.6.7.101.1.5
The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpOspfRxNewLsas 1.3.6.1.4.1.562.2.4.1.100.6.7.101.1.6
The number of link-state advertisements received determined to be new instantiations. This number does not include newer instantiations of self- originated link-state advertisements.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpOspfStateTable 1.3.6.1.4.1.562.2.4.1.100.6.7.102
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfStateEntry

vrIpOspfStateEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.102.1
An entry in the vrIpOspfStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfStateEntry  

vrIpOspfAdminState 1.3.6.1.4.1.562.2.4.1.100.6.7.102.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrIpOspfOperationalState 1.3.6.1.4.1.562.2.4.1.100.6.7.102.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpOspfUsageState 1.3.6.1.4.1.562.2.4.1.100.6.7.102.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrIpOspfOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.7.105
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfOperStatusEntry

vrIpOspfOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.105.1
An entry in the vrIpOspfOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfOperStatusEntry  

vrIpOspfSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.105.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpOspfArea 1.3.6.1.4.1.562.2.4.1.100.6.7.2
OBJECT IDENTIFIER    

vrIpOspfAreaRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.7.2.1
This entry controls the addition and deletion of vrIpOspfArea components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfAreaRowStatusEntry

vrIpOspfAreaRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.2.1.1
A single entry in the table represents a single vrIpOspfArea component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfAreaRowStatusEntry  

vrIpOspfAreaRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpOspfArea components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpOspfAreaComponentName 1.3.6.1.4.1.562.2.4.1.100.6.7.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpOspfAreaStorageType 1.3.6.1.4.1.562.2.4.1.100.6.7.2.1.1.4
This variable represents the storage type value for the vrIpOspfArea tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpOspfAreaAreaIdIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.2.1.1.10
This variable represents the index for the vrIpOspfArea tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpOspfAreaProvTable 1.3.6.1.4.1.562.2.4.1.100.6.7.2.10
This group describes the set of provisionable attributes for the AreaEntry Component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfAreaProvEntry

vrIpOspfAreaProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.2.10.1
An entry in the vrIpOspfAreaProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfAreaProvEntry  

vrIpOspfAreaAuthType 1.3.6.1.4.1.562.2.4.1.100.6.7.2.10.1.1
The authentication type specified for this area.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), simplePassword(1)  

vrIpOspfAreaImportAsExtern 1.3.6.1.4.1.562.2.4.1.100.6.7.2.10.1.2
The area's support for importing AS external link-state advertisements. For backbone area (that is, areaId 0.0.0.0), this attribute must be set to importExternal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER importExternal(1), importNoExternal(2), importNssa(3)  

vrIpOspfAreaAreaSummary 1.3.6.1.4.1.562.2.4.1.100.6.7.2.10.1.3
This variable controls the import of summary LSAs into stub areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub areas. It will rely entirely on its default route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAreaSummary(1), sendAreaSummary(2)  

vrIpOspfAreaOperTable 1.3.6.1.4.1.562.2.4.1.100.6.7.2.11
This group of attributes describes the Operational set of attributes for the AreaEntry component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfAreaOperEntry

vrIpOspfAreaOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.2.11.1
An entry in the vrIpOspfAreaOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfAreaOperEntry  

vrIpOspfAreaSpfRuns 1.3.6.1.4.1.562.2.4.1.100.6.7.2.11.1.1
The number of times that the intra-area route table has been calculated using this area's link-state database since the protocol became operational.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpOspfAreaAreaBdrRtrCount 1.3.6.1.4.1.562.2.4.1.100.6.7.2.11.1.2
The total number of area border routers reachable within this area. This is initially zero, and is calculated in each Shortest Path First Pass.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

vrIpOspfAreaAsBdrRtrCount 1.3.6.1.4.1.562.2.4.1.100.6.7.2.11.1.3
The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each Shortest Path First Pass.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

vrIpOspfAreaLsaCount 1.3.6.1.4.1.562.2.4.1.100.6.7.2.11.1.4
The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

vrIpOspfAreaAreaLsaCksumSum 1.3.6.1.4.1.562.2.4.1.100.6.7.2.11.1.5
The 32-bit unsigned sum of the link-state advertisement's LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpOspfStub 1.3.6.1.4.1.562.2.4.1.100.6.7.3
OBJECT IDENTIFIER    

vrIpOspfStubRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.7.3.1
This entry controls the addition and deletion of vrIpOspfStub components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfStubRowStatusEntry

vrIpOspfStubRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.3.1.1
A single entry in the table represents a single vrIpOspfStub component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfStubRowStatusEntry  

vrIpOspfStubRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.3.1.1.1
This variable is used as the basis for SNMP naming of vrIpOspfStub components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpOspfStubComponentName 1.3.6.1.4.1.562.2.4.1.100.6.7.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpOspfStubStorageType 1.3.6.1.4.1.562.2.4.1.100.6.7.3.1.1.4
This variable represents the storage type value for the vrIpOspfStub tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpOspfStubAreaIdIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.3.1.1.10
This variable represents an index for the vrIpOspfStub tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpOspfStubTosIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.3.1.1.11
This variable represents an index for the vrIpOspfStub tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..0  

vrIpOspfStubProvTable 1.3.6.1.4.1.562.2.4.1.100.6.7.3.10
These set of attributes explain the provisionable group for the StubAreaEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfStubProvEntry

vrIpOspfStubProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.3.10.1
An entry in the vrIpOspfStubProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfStubProvEntry  

vrIpOspfStubMetric 1.3.6.1.4.1.562.2.4.1.100.6.7.3.10.1.1
The metric value applied at the indicated type of service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4294967295  

vrIpOspfStubMetricType 1.3.6.1.4.1.562.2.4.1.100.6.7.3.10.1.2
This type of the metric advertised as a default route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ospfMetric(1), comparableCost(2), nonComparable(3)  

vrIpOspfStubAdvertiseDefault 1.3.6.1.4.1.562.2.4.1.100.6.7.3.10.1.3
This attribute determines whether or not the default routing information will be advertised, depending on other criterion. Setting this value to no can prevent advertising default routing information. If the value of the attribute is set to yes, then the value of the attribute importAsExtern for that particular AreaEntry should be set to importNssa.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

vrIpOspfAggregate 1.3.6.1.4.1.562.2.4.1.100.6.7.5
OBJECT IDENTIFIER    

vrIpOspfAggregateRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.7.5.1
This entry controls the addition and deletion of vrIpOspfAggregate components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfAggregateRowStatusEntry

vrIpOspfAggregateRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.5.1.1
A single entry in the table represents a single vrIpOspfAggregate component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfAggregateRowStatusEntry  

vrIpOspfAggregateRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.5.1.1.1
This variable is used as the basis for SNMP naming of vrIpOspfAggregate components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpOspfAggregateComponentName 1.3.6.1.4.1.562.2.4.1.100.6.7.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpOspfAggregateStorageType 1.3.6.1.4.1.562.2.4.1.100.6.7.5.1.1.4
This variable represents the storage type value for the vrIpOspfAggregate tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpOspfAggregateAreaIdIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.5.1.1.10
This variable represents an index for the vrIpOspfAggregate tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpOspfAggregateLsdbTypeIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.5.1.1.11
This variable represents an index for the vrIpOspfAggregate tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER summaryLink(3), nssaExternalLink(7)  

vrIpOspfAggregateAggregateNetIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.5.1.1.12
This variable represents an index for the vrIpOspfAggregate tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpOspfAggregateAggregateMaskIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.5.1.1.13
This variable represents an index for the vrIpOspfAggregate tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpOspfAggregateProvTable 1.3.6.1.4.1.562.2.4.1.100.6.7.5.10
Identifies a group of provisionable attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfAggregateProvEntry

vrIpOspfAggregateProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.5.10.1
An entry in the vrIpOspfAggregateProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfAggregateProvEntry  

vrIpOspfAggregateEffect 1.3.6.1.4.1.562.2.4.1.100.6.7.5.10.1.1
This attribute determines whether or not the routing information will be advertised, depending on other criterion. Setting this value to doNotAdvertiseMatching can prevent advertising routing information for the address and mask values specified as the indices for this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER advertiseMatching(1), doNotAdvertiseMatching(2), invalid(3)  

vrIpOspfHost 1.3.6.1.4.1.562.2.4.1.100.6.7.6
OBJECT IDENTIFIER    

vrIpOspfHostRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.7.6.1
This entry controls the addition and deletion of vrIpOspfHost components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfHostRowStatusEntry

vrIpOspfHostRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.6.1.1
A single entry in the table represents a single vrIpOspfHost component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfHostRowStatusEntry  

vrIpOspfHostRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.6.1.1.1
This variable is used as the basis for SNMP naming of vrIpOspfHost components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpOspfHostComponentName 1.3.6.1.4.1.562.2.4.1.100.6.7.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpOspfHostStorageType 1.3.6.1.4.1.562.2.4.1.100.6.7.6.1.1.4
This variable represents the storage type value for the vrIpOspfHost tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpOspfHostAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.6.1.1.10
This variable represents an index for the vrIpOspfHost tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpOspfHostTosIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.6.1.1.11
This variable represents an index for the vrIpOspfHost tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..0  

vrIpOspfHostProvTable 1.3.6.1.4.1.562.2.4.1.100.6.7.6.10
Provisionable set of attributes for the Host entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfHostProvEntry

vrIpOspfHostProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.6.10.1
An entry in the vrIpOspfHostProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfHostProvEntry  

vrIpOspfHostAreaId 1.3.6.1.4.1.562.2.4.1.100.6.7.6.10.1.1
This is an Ip address for the Host Entry that indicates the area it belongs to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AreaID  

vrIpOspfHostMetric 1.3.6.1.4.1.562.2.4.1.100.6.7.6.10.1.2
The metric to be advertised.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

vrIpOspfVirtIf 1.3.6.1.4.1.562.2.4.1.100.6.7.7
OBJECT IDENTIFIER    

vrIpOspfVirtIfRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.7.7.1
This entry controls the addition and deletion of vrIpOspfVirtIf components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfVirtIfRowStatusEntry

vrIpOspfVirtIfRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.7.1.1
A single entry in the table represents a single vrIpOspfVirtIf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfVirtIfRowStatusEntry  

vrIpOspfVirtIfRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.7.1.1.1
This variable is used as the basis for SNMP naming of vrIpOspfVirtIf components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpOspfVirtIfComponentName 1.3.6.1.4.1.562.2.4.1.100.6.7.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpOspfVirtIfStorageType 1.3.6.1.4.1.562.2.4.1.100.6.7.7.1.1.4
This variable represents the storage type value for the vrIpOspfVirtIf tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpOspfVirtIfAreaIdIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.7.1.1.10
This variable represents an index for the vrIpOspfVirtIf tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpOspfVirtIfNbrRouterIdIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.7.1.1.11
This variable represents an index for the vrIpOspfVirtIf tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpOspfVirtIfProvTable 1.3.6.1.4.1.562.2.4.1.100.6.7.7.10
This group of attributes provide provisioning data for the VirtIfEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfVirtIfProvEntry

vrIpOspfVirtIfProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.7.10.1
An entry in the vrIpOspfVirtIfProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfVirtIfProvEntry  

vrIpOspfVirtIfTransitDelay 1.3.6.1.4.1.562.2.4.1.100.6.7.7.10.1.1
The estimated number of seconds it takes to transmit a link-state update packet over this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..3600  

vrIpOspfVirtIfRetransInterval 1.3.6.1.4.1.562.2.4.1.100.6.7.7.10.1.2
The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value would be well over the expected round-trip time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..3600  

vrIpOspfVirtIfHelloInterval 1.3.6.1.4.1.562.2.4.1.100.6.7.7.10.1.3
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..3600  

vrIpOspfVirtIfRtrDeadInterval 1.3.6.1.4.1.562.2.4.1.100.6.7.7.10.1.4
The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..3600  

vrIpOspfVirtIfAuthKey 1.3.6.1.4.1.562.2.4.1.100.6.7.7.10.1.5
If authentication type is simple password, the password for this virtual circuit. If the value of the attribute is not set, then this attribute is ignored by the application. If the value of this attribute is set, then the value of the attribute authType under this particular Area should be set to simplePassword, otherwise the application will ignore this authentication key.
Status: mandatory Access: write-only
OBJECT-TYPE    
  HexString Size(1..8)  

vrIpOspfVirtIfOperTable 1.3.6.1.4.1.562.2.4.1.100.6.7.7.11
Represents a group of operational attributes for the VirtIfEntry component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfVirtIfOperEntry

vrIpOspfVirtIfOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.7.11.1
An entry in the vrIpOspfVirtIfOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfVirtIfOperEntry  

vrIpOspfVirtIfState 1.3.6.1.4.1.562.2.4.1.100.6.7.7.11.1.1
The state of the OSPF virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), pointToPoint(4)  

vrIpOspfVirtIfEvents 1.3.6.1.4.1.562.2.4.1.100.6.7.7.11.1.2
The number of state changes or error events on the virtual link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpOspfExport 1.3.6.1.4.1.562.2.4.1.100.6.7.8
OBJECT IDENTIFIER    

vrIpOspfExportRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.7.8.1
This entry controls the addition and deletion of vrIpOspfExport components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfExportRowStatusEntry

vrIpOspfExportRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.8.1.1
A single entry in the table represents a single vrIpOspfExport component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfExportRowStatusEntry  

vrIpOspfExportRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.8.1.1.1
This variable is used as the basis for SNMP naming of vrIpOspfExport components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpOspfExportComponentName 1.3.6.1.4.1.562.2.4.1.100.6.7.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpOspfExportStorageType 1.3.6.1.4.1.562.2.4.1.100.6.7.8.1.1.4
This variable represents the storage type value for the vrIpOspfExport tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpOspfExportIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.8.1.1.10
This variable represents the index for the vrIpOspfExport tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

vrIpOspfExportProvTable 1.3.6.1.4.1.562.2.4.1.100.6.7.8.10
This Group contains all the Provisioned attributes for the Export Component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfExportProvEntry

vrIpOspfExportProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.8.10.1
An entry in the vrIpOspfExportProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfExportProvEntry  

vrIpOspfExportAdvertiseStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.8.10.1.1
This attribute specifies if the routes that match this export policy are advertised (send) or not advertised (block).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER send(1), block(2)  

vrIpOspfExportMetric 1.3.6.1.4.1.562.2.4.1.100.6.7.8.10.1.2
This attribute specifies the metric to be used on the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of metric is ignored. The metric value is not used to select which routes to block or send, but rather the metric value advertised for the routes. A value of -1 indicates that the metric associated with the route in the forwarding table is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1..16777215  

vrIpOspfExportProtocol 1.3.6.1.4.1.562.2.4.1.100.6.7.8.10.1.3
This attribute specifies the routes to which this export policy applies based on the routing protocol of how the routes are learned. If it is set to all, this export policy applies to all routes in the forwarding table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER all(1), egp(2), rip(3), staticLocal(6), staticRemote(7), bgpExternal(9)  

vrIpOspfExportRipInterface 1.3.6.1.4.1.562.2.4.1.100.6.7.8.10.1.4
This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP interface from which the routes are learned. This attribute can only be non zero when the protocol is set to rip. The value of 0.0.0.0 implies any RIP interface on the same virtual router; otherwise the value of this attribute must match the interface address of a LogicalIf that has a RipIf on the same virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpOspfExportRipNeighbor 1.3.6.1.4.1.562.2.4.1.100.6.7.8.10.1.5
This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP neighbor of which the routes are learned from. This attribute can only be non zero when the protocol is set to rip. The value of 0.0.0.0 implies any RIP neighbor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpOspfExportEgpAsId 1.3.6.1.4.1.562.2.4.1.100.6.7.8.10.1.6
This attribute specifies the EGP learned routes to which this export policy applies, based on the EGP autonomous system identifier of which the routes are learned from. This attribute can only be non zero when protocol is set to egp. The value of 0 implies any EGP autonomous system; otherwise the value of this attribute must match the asId of an EGP neighbor on the same virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

vrIpOspfExportTag 1.3.6.1.4.1.562.2.4.1.100.6.7.8.10.1.7
This attribute specifies the OSPF tag to be used on the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of tag is ignored. The tag value is not used to select which routes to block or send, but rather the tag value advertised for the routes. A value of 4294967295 indicates that the tag associated with the route in the forwarding table is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpOspfExportExtLsaMetricType 1.3.6.1.4.1.562.2.4.1.100.6.7.8.10.1.8
This attribute specifies the metric type in the OSPF external link state advertisement of the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of extLsaMetricType is ignored. The extLsaMetricType value is not used to select which routes to block or send, but rather the metric value advertised for the routes. The value useProtocolDefault indicates the metric type is automatically chosen based on the routing protocol which the route was learned from.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER useProtocolDefault(0), type1(1), type2(2)  

vrIpOspfExportBgpAsId 1.3.6.1.4.1.562.2.4.1.100.6.7.8.10.1.9
This key attribute specifies the bgp AS from which a bgp route is learned from. This key is used only if the protocol is bgpExternal. bgpAsId of value 0 mathces all ASs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

vrIpOspfExportBgpPeerIp 1.3.6.1.4.1.562.2.4.1.100.6.7.8.10.1.10
This key attribute specifies the bgp peer where the routes were learned from. bgpPeerIp of 0 matches all bgp peers. This attribute is used as a key when protocol is set to bgpInternal or bgpExternal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpOspfExportNetList 1.3.6.1.4.1.562.2.4.1.100.6.7.8.2
OBJECT IDENTIFIER    

vrIpOspfExportNetListRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.7.8.2.1
This entry controls the addition and deletion of vrIpOspfExportNetList components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfExportNetListRowStatusEntry

vrIpOspfExportNetListRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.8.2.1.1
A single entry in the table represents a single vrIpOspfExportNetList component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfExportNetListRowStatusEntry  

vrIpOspfExportNetListRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.8.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpOspfExportNetList components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpOspfExportNetListComponentName 1.3.6.1.4.1.562.2.4.1.100.6.7.8.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpOspfExportNetListStorageType 1.3.6.1.4.1.562.2.4.1.100.6.7.8.2.1.1.4
This variable represents the storage type value for the vrIpOspfExportNetList tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpOspfExportNetListIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.8.2.1.1.10
This variable represents the index for the vrIpOspfExportNetList tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

vrIpOspfExportNetListProvTable 1.3.6.1.4.1.562.2.4.1.100.6.7.8.2.10
This group identifies the set of provisionable attributes for the ExportNetworkList component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfExportNetListProvEntry

vrIpOspfExportNetListProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.8.2.10.1
An entry in the vrIpOspfExportNetListProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfExportNetListProvEntry  

vrIpOspfExportNetListIpAddress 1.3.6.1.4.1.562.2.4.1.100.6.7.8.2.10.1.1
This attribute identifies the 32 bit IP address to match against.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpOspfExportNetListIpMask 1.3.6.1.4.1.562.2.4.1.100.6.7.8.2.10.1.2
This attribute is the IP Mask to be used with the IP Address to match against.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpOspfVirtNbr 1.3.6.1.4.1.562.2.4.1.100.6.7.9
OBJECT IDENTIFIER    

vrIpOspfVirtNbrRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.7.9.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpOspfVirtNbr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfVirtNbrRowStatusEntry

vrIpOspfVirtNbrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.9.1.1
A single entry in the table represents a single vrIpOspfVirtNbr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfVirtNbrRowStatusEntry  

vrIpOspfVirtNbrRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.9.1.1.1
This variable is used as the basis for SNMP naming of vrIpOspfVirtNbr components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpOspfVirtNbrComponentName 1.3.6.1.4.1.562.2.4.1.100.6.7.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpOspfVirtNbrStorageType 1.3.6.1.4.1.562.2.4.1.100.6.7.9.1.1.4
This variable represents the storage type value for the vrIpOspfVirtNbr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpOspfVirtNbrAreaIdIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.9.1.1.10
This variable represents an index for the vrIpOspfVirtNbr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpOspfVirtNbrNbrRouterIdIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.9.1.1.11
This variable represents an index for the vrIpOspfVirtNbr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpOspfVirtNbrOperTable 1.3.6.1.4.1.562.2.4.1.100.6.7.9.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group identifies a set of operational attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfVirtNbrOperEntry

vrIpOspfVirtNbrOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.9.10.1
An entry in the vrIpOspfVirtNbrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfVirtNbrOperEntry  

vrIpOspfVirtNbrNbrIpAddress 1.3.6.1.4.1.562.2.4.1.100.6.7.9.10.1.1
Indicates the Ip address this interface this virtual neighbor is using.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vrIpOspfVirtNbrOptions 1.3.6.1.4.1.562.2.4.1.100.6.7.9.10.1.2
A bit mask corresponding to the neighbor's options field. Bit 1, if set indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; i.e., that it implements OSPF Multicast Routing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

vrIpOspfVirtNbrState 1.3.6.1.4.1.562.2.4.1.100.6.7.9.10.1.3
The state of the virtual neighbor relationship.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), attempt(2), init(3), twoWay(4), exchange(5), exchangeStatrt(6), loading(7), full(8)  

vrIpOspfVirtNbrEvents 1.3.6.1.4.1.562.2.4.1.100.6.7.9.10.1.4
The number of times this virtual link has changed its state, or an error has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpOspfVirtNbrLsRetransQlen 1.3.6.1.4.1.562.2.4.1.100.6.7.9.10.1.5
The current length of the Retransmission queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

vrIpOspfVirtNbrExchangeStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.9.10.1.6
Indicates the exchange status of the entry in this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER master(1), slave(2)  

vrIpOspfNbr 1.3.6.1.4.1.562.2.4.1.100.6.7.10
OBJECT IDENTIFIER    

vrIpOspfNbrRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.7.10.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpOspfNbr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfNbrRowStatusEntry

vrIpOspfNbrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.10.1.1
A single entry in the table represents a single vrIpOspfNbr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfNbrRowStatusEntry  

vrIpOspfNbrRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.10.1.1.1
This variable is used as the basis for SNMP naming of vrIpOspfNbr components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpOspfNbrComponentName 1.3.6.1.4.1.562.2.4.1.100.6.7.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpOspfNbrStorageType 1.3.6.1.4.1.562.2.4.1.100.6.7.10.1.1.4
This variable represents the storage type value for the vrIpOspfNbr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpOspfNbrAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.10.1.1.10
This variable represents an index for the vrIpOspfNbr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpOspfNbrAddressLessIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.10.1.1.11
This variable represents an index for the vrIpOspfNbr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0  

vrIpOspfNbrOperTable 1.3.6.1.4.1.562.2.4.1.100.6.7.10.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group identifies the operational set of attributes for the NeighborEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfNbrOperEntry

vrIpOspfNbrOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.10.10.1
An entry in the vrIpOspfNbrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfNbrOperEntry  

vrIpOspfNbrRtrId 1.3.6.1.4.1.562.2.4.1.100.6.7.10.10.1.1
An Ip Address that uniquely identifies the neighboring router in the autonomous system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vrIpOspfNbrOptions 1.3.6.1.4.1.562.2.4.1.100.6.7.10.10.1.2
A bit mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information, if zero, it is a stub area. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; i.e., that it implements OSPF Multicast Routing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

vrIpOspfNbrPriority 1.3.6.1.4.1.562.2.4.1.100.6.7.10.10.1.3
The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

vrIpOspfNbrState 1.3.6.1.4.1.562.2.4.1.100.6.7.10.10.1.4
The state of the relationship with this neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)  

vrIpOspfNbrEvents 1.3.6.1.4.1.562.2.4.1.100.6.7.10.10.1.5
The number of times this neighbor relationship has changed state, or an error has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpOspfNbrLsRetransQlen 1.3.6.1.4.1.562.2.4.1.100.6.7.10.10.1.6
The current length of the Retransmission queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

vrIpOspfNbrNbmaNbrStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.10.10.1.7
This attribute describes the status of the entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

vrIpOspfNbrExchangeStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.10.10.1.8
Indicates the exchange status for a neighbor entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER master(1), slave(2)  

vrIpOspfNbrPermanence 1.3.6.1.4.1.562.2.4.1.100.6.7.10.10.1.11
This attribute displays how the neighbor became an entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(1), permanent(2)  

vrIpOspfLsdb 1.3.6.1.4.1.562.2.4.1.100.6.7.11
OBJECT IDENTIFIER    

vrIpOspfLsdbRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.7.11.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpOspfLsdb components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfLsdbRowStatusEntry

vrIpOspfLsdbRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.11.1.1
A single entry in the table represents a single vrIpOspfLsdb component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfLsdbRowStatusEntry  

vrIpOspfLsdbRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.11.1.1.1
This variable is used as the basis for SNMP naming of vrIpOspfLsdb components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpOspfLsdbComponentName 1.3.6.1.4.1.562.2.4.1.100.6.7.11.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpOspfLsdbStorageType 1.3.6.1.4.1.562.2.4.1.100.6.7.11.1.1.4
This variable represents the storage type value for the vrIpOspfLsdb tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpOspfLsdbAreaIdIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.11.1.1.10
This variable represents an index for the vrIpOspfLsdb tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpOspfLsdbLsdbTypeIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.11.1.1.11
This variable represents an index for the vrIpOspfLsdb tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..7  

vrIpOspfLsdbLsIdIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.11.1.1.12
This variable represents an index for the vrIpOspfLsdb tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpOspfLsdbRouterIdIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.11.1.1.13
This variable represents an index for the vrIpOspfLsdb tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpOspfLsdbOperTable 1.3.6.1.4.1.562.2.4.1.100.6.7.11.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group describes the Operational set of attributes for the LsdbEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfLsdbOperEntry

vrIpOspfLsdbOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.11.10.1
An entry in the vrIpOspfLsdbOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfLsdbOperEntry  

vrIpOspfLsdbSequence 1.3.6.1.4.1.562.2.4.1.100.6.7.11.10.1.1
A signed 32-bit integer, used to detect old and duplicate LSAs. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpOspfLsdbAge 1.3.6.1.4.1.562.2.4.1.100.6.7.11.10.1.2
The age of the Link State Advertisement in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..3600  

vrIpOspfLsdbChecksum 1.3.6.1.4.1.562.2.4.1.100.6.7.11.10.1.3
The checksum of the complete contents of the advertisement, excepting the age field. The checksum used is the Fletcher checksum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpOspfLsdbAdvertisement 1.3.6.1.4.1.562.2.4.1.100.6.7.11.10.1.4
The entire LSA including its header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(1..1024)  

vrIpOspfExtLsdb 1.3.6.1.4.1.562.2.4.1.100.6.7.12
OBJECT IDENTIFIER    

vrIpOspfExtLsdbRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.7.12.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpOspfExtLsdb components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfExtLsdbRowStatusEntry

vrIpOspfExtLsdbRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.12.1.1
A single entry in the table represents a single vrIpOspfExtLsdb component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfExtLsdbRowStatusEntry  

vrIpOspfExtLsdbRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.7.12.1.1.1
This variable is used as the basis for SNMP naming of vrIpOspfExtLsdb components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpOspfExtLsdbComponentName 1.3.6.1.4.1.562.2.4.1.100.6.7.12.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpOspfExtLsdbStorageType 1.3.6.1.4.1.562.2.4.1.100.6.7.12.1.1.4
This variable represents the storage type value for the vrIpOspfExtLsdb tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpOspfExtLsdbLsdbTypeIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.12.1.1.10
This variable represents an index for the vrIpOspfExtLsdb tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..7  

vrIpOspfExtLsdbLsIdIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.12.1.1.11
This variable represents an index for the vrIpOspfExtLsdb tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpOspfExtLsdbRouterIdIndex 1.3.6.1.4.1.562.2.4.1.100.6.7.12.1.1.12
This variable represents an index for the vrIpOspfExtLsdb tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpOspfExtLsdbOperTable 1.3.6.1.4.1.562.2.4.1.100.6.7.12.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group describes the operational set of attributes for the ExtLsdbEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpOspfExtLsdbOperEntry

vrIpOspfExtLsdbOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.7.12.10.1
An entry in the vrIpOspfExtLsdbOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpOspfExtLsdbOperEntry  

vrIpOspfExtLsdbSequence 1.3.6.1.4.1.562.2.4.1.100.6.7.12.10.1.1
A signed 32-bit integer, used to detect old and duplicate LSAs. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpOspfExtLsdbAge 1.3.6.1.4.1.562.2.4.1.100.6.7.12.10.1.2
The age of the Link State Advertisement in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..3600  

vrIpOspfExtLsdbChecksum 1.3.6.1.4.1.562.2.4.1.100.6.7.12.10.1.3
The checksum of the complete contents of the advertisement, excepting the age field. The checksum used is the Fletcher checksum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpOspfExtLsdbAdvertisement 1.3.6.1.4.1.562.2.4.1.100.6.7.12.10.1.4
The entire LSA including its header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(1..36)  

vrIpRip 1.3.6.1.4.1.562.2.4.1.100.6.8
OBJECT IDENTIFIER    

vrIpRipRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.8.1
This entry controls the addition and deletion of vrIpRip components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRipRowStatusEntry

vrIpRipRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.8.1.1
A single entry in the table represents a single vrIpRip component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRipRowStatusEntry  

vrIpRipRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.8.1.1.1
This variable is used as the basis for SNMP naming of vrIpRip components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpRipComponentName 1.3.6.1.4.1.562.2.4.1.100.6.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpRipStorageType 1.3.6.1.4.1.562.2.4.1.100.6.8.1.1.4
This variable represents the storage type value for the vrIpRip tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpRipIndex 1.3.6.1.4.1.562.2.4.1.100.6.8.1.1.10
This variable represents the index for the vrIpRip tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpRipProvTable 1.3.6.1.4.1.562.2.4.1.100.6.8.10
This group contains the provisionable attributes for the RIP component
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRipProvEntry

vrIpRipProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.8.10.1
An entry in the vrIpRipProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRipProvEntry  

vrIpRipMigrateRip 1.3.6.1.4.1.562.2.4.1.100.6.8.10.1.2
This attribute sets the preference level of OSPF-internal routes to be less preferred than RIP. Note: This parameter should only be used when starting migration of network from RIP to OSPF. When ready to cutover to OSPF, set this attribute value to disabled and run under normal preferences. All OSPF routers in the Autonomous System should be running with migrateRip enabled or with migrateRip disabled to prevent routing loops. It is important that the changeover period from RIP to OSPF be performed quickly on all OSPF routers so that no routing loops are formed. These routing loops could be caused by conflicts in the internal RIP and OSPF databases.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrIpRipRfc1058MetricUsage 1.3.6.1.4.1.562.2.4.1.100.6.8.10.1.3
This attribute determines the metric usage for this RIP instance. This flag is used to determine the way metrics are incremented. RFC1058 way : Sending Update: This is to use the metric for the route from the routing table as the advertised metric to be sent for that route. Nothing is ever added to this value from the sending side. The only special case handling is that if the route being advertised is the network route of a directly connectednetwork, the metric in the routing table will be zero. Then the RipIf interface metric for the interface being advertised is used as the advertise metric. If the interface being advertised is not a Rip interface, then metric value of 1 is used. Receiving Update: Add receiving interface's RIP metric to the metric for the route in the received advertisement and install the result in the receiver's routing table as the metric for that route. Older way: Sending Updates: Add the out going interfaces rip metric to the metric for a route in the routing table to form the metric to be advertised for that route. Receiving Updates: The metric received in the advertisement for a route is put directly in the routing table as the metric for that route. Note: It is recommended that, all the routers in this autonomous system should be following the rfc1058 metric system. Setting this flag to disabled will have the effect of running the RIP with old metric incrementing system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrIpRipGenerateDiscardRoute 1.3.6.1.4.1.562.2.4.1.100.6.8.10.1.4
This attribute when set to yes will add network disacrd routes to the routing and forwarding table for the subnetted interfaces that are running RIP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

vrIpRipRipUpdate 1.3.6.1.4.1.562.2.4.1.100.6.8.10.1.5
This attribute sets the interval for sending updates bewteen RIP neighbours. Set this attribute with a value less than that of the timeout and garbage collect timers. The ripUpdate timer starts when a route comes up and when updates are received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 15..500  

vrIpRipRipTimeout 1.3.6.1.4.1.562.2.4.1.100.6.8.10.1.6
This attribute sets the RIP timeout interval. If this timer expires, the route is no longer valid. The ripTimeout timer starts when a route comes up and when updates are received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 15..500  

vrIpRipGarbageCollectTimer 1.3.6.1.4.1.562.2.4.1.100.6.8.10.1.7
This attribute sets the interval between a route's timeout expiring and the deletion of that route's information from the routing table. The garbage collect timer starts when the ripTimeout period expires.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 15..500  

vrIpRipStateTable 1.3.6.1.4.1.562.2.4.1.100.6.8.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRipStateEntry

vrIpRipStateEntry 1.3.6.1.4.1.562.2.4.1.100.6.8.11.1
An entry in the vrIpRipStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRipStateEntry  

vrIpRipAdminState 1.3.6.1.4.1.562.2.4.1.100.6.8.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrIpRipOperationalState 1.3.6.1.4.1.562.2.4.1.100.6.8.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpRipUsageState 1.3.6.1.4.1.562.2.4.1.100.6.8.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrIpRipAdminControlTable 1.3.6.1.4.1.562.2.4.1.100.6.8.12
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRipAdminControlEntry

vrIpRipAdminControlEntry 1.3.6.1.4.1.562.2.4.1.100.6.8.12.1
An entry in the vrIpRipAdminControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRipAdminControlEntry  

vrIpRipSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.6.8.12.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpRipOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.8.15
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRipOperStatusEntry

vrIpRipOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.8.15.1
An entry in the vrIpRipOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRipOperStatusEntry  

vrIpRipSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.6.8.15.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpRipOperTable 1.3.6.1.4.1.562.2.4.1.100.6.8.16
This group defines a set of operational attributes belonging to the RIP component. It corresponds to the rip2Globals table in the RIP-2 standard MIB.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRipOperEntry

vrIpRipOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.8.16.1
An entry in the vrIpRipOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRipOperEntry  

vrIpRipRouteChangesMade 1.3.6.1.4.1.562.2.4.1.100.6.8.16.1.1
This attribute counts the route changes made to the IP Route Database by Rip. This does not include the refresh of the route's age.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpRipQueryResponses 1.3.6.1.4.1.562.2.4.1.100.6.8.16.1.2
This attribute counts the responses sent to RIP queries from other systems.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpRipImport 1.3.6.1.4.1.562.2.4.1.100.6.8.2
OBJECT IDENTIFIER    

vrIpRipImportRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.8.2.1
This entry controls the addition and deletion of vrIpRipImport components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRipImportRowStatusEntry

vrIpRipImportRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.8.2.1.1
A single entry in the table represents a single vrIpRipImport component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRipImportRowStatusEntry  

vrIpRipImportRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.8.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpRipImport components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpRipImportComponentName 1.3.6.1.4.1.562.2.4.1.100.6.8.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpRipImportStorageType 1.3.6.1.4.1.562.2.4.1.100.6.8.2.1.1.4
This variable represents the storage type value for the vrIpRipImport tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpRipImportIndex 1.3.6.1.4.1.562.2.4.1.100.6.8.2.1.1.10
This variable represents the index for the vrIpRipImport tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

vrIpRipImportProvTable 1.3.6.1.4.1.562.2.4.1.100.6.8.2.10
This is the group of provisionable attributes for the XXXX Import Subcomponent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRipImportProvEntry

vrIpRipImportProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.8.2.10.1
An entry in the vrIpRipImportProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRipImportProvEntry  

vrIpRipImportUsageFlag 1.3.6.1.4.1.562.2.4.1.100.6.8.2.10.1.1
This flag when set to ignore indicates the routes that are not used and if set to use, indicates the routes which are used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER use(1), ignore(2)  

vrIpRipImportImportMetric 1.3.6.1.4.1.562.2.4.1.100.6.8.2.10.1.2
This attribute is used to override the default import metric for the RIP protocol. This value is not used to select which routes to use or ignore, rather it is the metric to be used in the routing table for the routes imported for this import policy. A value of zero indicates that the metric received in the update will be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..16  

vrIpRipImportNeighbor 1.3.6.1.4.1.562.2.4.1.100.6.8.2.10.1.3
This attribute indicates the IP Address of the neighbor this policy will apply to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpRipImportInterface 1.3.6.1.4.1.562.2.4.1.100.6.8.2.10.1.4
This attribute specifies the RIP interface to which this import policy applies. The value of 0.0.0.0 implies any RIP interface on the virtual router; otherwise the value of this attribute must match the interface address of a LogicalIf that has a RipIf on the same virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpRipImportNet 1.3.6.1.4.1.562.2.4.1.100.6.8.2.2
OBJECT IDENTIFIER    

vrIpRipImportNetRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.8.2.2.1
This entry controls the addition and deletion of vrIpRipImportNet components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRipImportNetRowStatusEntry

vrIpRipImportNetRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.8.2.2.1.1
A single entry in the table represents a single vrIpRipImportNet component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRipImportNetRowStatusEntry  

vrIpRipImportNetRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.8.2.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpRipImportNet components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpRipImportNetComponentName 1.3.6.1.4.1.562.2.4.1.100.6.8.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpRipImportNetStorageType 1.3.6.1.4.1.562.2.4.1.100.6.8.2.2.1.1.4
This variable represents the storage type value for the vrIpRipImportNet tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpRipImportNetIndex 1.3.6.1.4.1.562.2.4.1.100.6.8.2.2.1.1.10
This variable represents the index for the vrIpRipImportNet tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

vrIpRipImportNetProvTable 1.3.6.1.4.1.562.2.4.1.100.6.8.2.2.10
This group contains attributes for the XXXX NetworkList component for the Import Policy to be applied to
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRipImportNetProvEntry

vrIpRipImportNetProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.8.2.2.10.1
An entry in the vrIpRipImportNetProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRipImportNetProvEntry  

vrIpRipImportNetIpAddress 1.3.6.1.4.1.562.2.4.1.100.6.8.2.2.10.1.1
This attribute specifies the IP address that needs to be matched against in this network list for the Import Policy to be applied to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpRipImportNetIpMask 1.3.6.1.4.1.562.2.4.1.100.6.8.2.2.10.1.2
This attribute specifies the IP mask for the attribute ipAddress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpRipExport 1.3.6.1.4.1.562.2.4.1.100.6.8.3
OBJECT IDENTIFIER    

vrIpRipExportRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.8.3.1
This entry controls the addition and deletion of vrIpRipExport components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRipExportRowStatusEntry

vrIpRipExportRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.8.3.1.1
A single entry in the table represents a single vrIpRipExport component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRipExportRowStatusEntry  

vrIpRipExportRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.8.3.1.1.1
This variable is used as the basis for SNMP naming of vrIpRipExport components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpRipExportComponentName 1.3.6.1.4.1.562.2.4.1.100.6.8.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpRipExportStorageType 1.3.6.1.4.1.562.2.4.1.100.6.8.3.1.1.4
This variable represents the storage type value for the vrIpRipExport tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpRipExportIndex 1.3.6.1.4.1.562.2.4.1.100.6.8.3.1.1.10
This variable represents the index for the vrIpRipExport tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

vrIpRipExportProvTable 1.3.6.1.4.1.562.2.4.1.100.6.8.3.10
This group contains all the provisioned attributes for the Export component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRipExportProvEntry

vrIpRipExportProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.8.3.10.1
An entry in the vrIpRipExportProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRipExportProvEntry  

vrIpRipExportAdvertiseStatus 1.3.6.1.4.1.562.2.4.1.100.6.8.3.10.1.1
This attribute specifies if the routes that match this export policy are advertised (send) or not advertised (block).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER send(1), block(2)  

vrIpRipExportExportMetric 1.3.6.1.4.1.562.2.4.1.100.6.8.3.10.1.2
This attribute specifies the metric to be used on the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of exportMetric is ignored. The exportMetric value is not used to select which routes to block or send, but rather the metric value advertised for the routes. A value of 0 indicates that the metric associated with the route in the forwarding table is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..16  

vrIpRipExportProtocol 1.3.6.1.4.1.562.2.4.1.100.6.8.3.10.1.3
This attribute specifies the routes to which this export policy applies based on the routing protocol of how the routes are learned. If it is set to all, this export policy applies to all routes in the forwarding table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER all(1), egp(2), rip(3), ospfInternal(4), ospfExternal(5), staticLocal(6), staticRemote(7), bgpInternal(8), bgpExternal(9)  

vrIpRipExportRipInterface 1.3.6.1.4.1.562.2.4.1.100.6.8.3.10.1.4
This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP interface from which the routes are learned. This attribute can only be non zero when the protocol is set to rip. The value of 0.0.0.0 implies any RIP interface on the same virtual router; otherwise the value of this attribute must match the interface address of a LogicalIf that has a RipIf on the same virtual router. DESCRIPTION
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpRipExportEgpAsId 1.3.6.1.4.1.562.2.4.1.100.6.8.3.10.1.5
This attribute specifies the EGP learned routes to which this export policy applies, based on the EGP autonomous system identifier of which the routes are learned from. This attribute can only be non zero when protocol is set to egp. The value of 0 implies any EGP autonomous system; otherwise the value of this attribute must match the asId of an EGP neighbor on the same virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65536  

vrIpRipExportOspfTag 1.3.6.1.4.1.562.2.4.1.100.6.8.3.10.1.6
This attribute specifies the OSPF learned external routes to which this export policy applies, based on the learned OSPF tag of the routes. This attribute can only be set to a non default value when protocol is set to ospfExternal. The default value of 4294967295 implies any tag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpRipExportOutInterface 1.3.6.1.4.1.562.2.4.1.100.6.8.3.10.1.7
This attribute specifies the RIP interface on the virtual router which routes are exported onto as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of outInterface is ignored. The outInterface value is not used to select which routes to block or send, but rather where to export the routes. A value of 0.0.0.0 indicates that the routes are exported to all RIP interfaces on the virtual router. Otherwise, the value of this attribute must match the interface address of a LogicalIf that has a RipIf on the same virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpRipExportBgpAsId 1.3.6.1.4.1.562.2.4.1.100.6.8.3.10.1.8
This key attribute specifies the BGP AS from which the routes are learned. This key will be used only when the protocol is set to bgpExternal. bgpAsId of 0 matches all BGP ASs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

vrIpRipExportNet 1.3.6.1.4.1.562.2.4.1.100.6.8.3.2
OBJECT IDENTIFIER    

vrIpRipExportNetRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.8.3.2.1
This entry controls the addition and deletion of vrIpRipExportNet components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRipExportNetRowStatusEntry

vrIpRipExportNetRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.8.3.2.1.1
A single entry in the table represents a single vrIpRipExportNet component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRipExportNetRowStatusEntry  

vrIpRipExportNetRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.8.3.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpRipExportNet components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpRipExportNetComponentName 1.3.6.1.4.1.562.2.4.1.100.6.8.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpRipExportNetStorageType 1.3.6.1.4.1.562.2.4.1.100.6.8.3.2.1.1.4
This variable represents the storage type value for the vrIpRipExportNet tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpRipExportNetIndex 1.3.6.1.4.1.562.2.4.1.100.6.8.3.2.1.1.10
This variable represents the index for the vrIpRipExportNet tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

vrIpRipExportNetProvTable 1.3.6.1.4.1.562.2.4.1.100.6.8.3.2.10
This group identifies the set of Provisionable attributes for the ExportNetworkList component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRipExportNetProvEntry

vrIpRipExportNetProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.8.3.2.10.1
An entry in the vrIpRipExportNetProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRipExportNetProvEntry  

vrIpRipExportNetIpAddress 1.3.6.1.4.1.562.2.4.1.100.6.8.3.2.10.1.1
This attribute identifies the 32 bit IP address to match against.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpRipExportNetIpMask 1.3.6.1.4.1.562.2.4.1.100.6.8.3.2.10.1.2
This attribute is the IP Mask to be used with the IP Address to match against.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpStatic 1.3.6.1.4.1.562.2.4.1.100.6.9
OBJECT IDENTIFIER    

vrIpStaticRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.9.1
This entry controls the addition and deletion of vrIpStatic components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpStaticRowStatusEntry

vrIpStaticRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.9.1.1
A single entry in the table represents a single vrIpStatic component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpStaticRowStatusEntry  

vrIpStaticRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.9.1.1.1
This variable is used as the basis for SNMP naming of vrIpStatic components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpStaticComponentName 1.3.6.1.4.1.562.2.4.1.100.6.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpStaticStorageType 1.3.6.1.4.1.562.2.4.1.100.6.9.1.1.4
This variable represents the storage type value for the vrIpStatic tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpStaticIndex 1.3.6.1.4.1.562.2.4.1.100.6.9.1.1.10
This variable represents the index for the vrIpStatic tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpStaticStateTable 1.3.6.1.4.1.562.2.4.1.100.6.9.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpStaticStateEntry

vrIpStaticStateEntry 1.3.6.1.4.1.562.2.4.1.100.6.9.10.1
An entry in the vrIpStaticStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpStaticStateEntry  

vrIpStaticAdminState 1.3.6.1.4.1.562.2.4.1.100.6.9.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrIpStaticOperationalState 1.3.6.1.4.1.562.2.4.1.100.6.9.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpStaticUsageState 1.3.6.1.4.1.562.2.4.1.100.6.9.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrIpStaticRoute 1.3.6.1.4.1.562.2.4.1.100.6.9.2
OBJECT IDENTIFIER    

vrIpStaticRouteRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.9.2.1
This entry controls the addition and deletion of vrIpStaticRoute components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpStaticRouteRowStatusEntry

vrIpStaticRouteRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.9.2.1.1
A single entry in the table represents a single vrIpStaticRoute component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpStaticRouteRowStatusEntry  

vrIpStaticRouteRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.9.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpStaticRoute components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpStaticRouteComponentName 1.3.6.1.4.1.562.2.4.1.100.6.9.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpStaticRouteStorageType 1.3.6.1.4.1.562.2.4.1.100.6.9.2.1.1.4
This variable represents the storage type value for the vrIpStaticRoute tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpStaticRouteDestAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.9.2.1.1.10
This variable represents an index for the vrIpStaticRoute tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpStaticRouteDestMaskIndex 1.3.6.1.4.1.562.2.4.1.100.6.9.2.1.1.11
This variable represents an index for the vrIpStaticRoute tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpStaticRouteTypeOfServiceIndex 1.3.6.1.4.1.562.2.4.1.100.6.9.2.1.1.12
This variable represents an index for the vrIpStaticRoute tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..0  

vrIpStaticRouteProvTable 1.3.6.1.4.1.562.2.4.1.100.6.9.2.10
This group contains a provisionable set of attributes for the static route entry component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpStaticRouteProvEntry

vrIpStaticRouteProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.9.2.10.1
An entry in the vrIpStaticRouteProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpStaticRouteProvEntry  

vrIpStaticRoutePreferredOver 1.3.6.1.4.1.562.2.4.1.100.6.9.2.10.1.12
This attribute indicates the preference of the static route in comparison with the OSPF route. intOspf means that the static route is chosen over the OSPF internal route, while extOspf means that the OSPF internal route is chosen over the static route. The default static route preference is set to extOspf .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER intOspf(5), extOspf(72)  

vrIpStaticRouteNh 1.3.6.1.4.1.562.2.4.1.100.6.9.2.2
OBJECT IDENTIFIER    

vrIpStaticRouteNhRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.9.2.2.1
This entry controls the addition and deletion of vrIpStaticRouteNh components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpStaticRouteNhRowStatusEntry

vrIpStaticRouteNhRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.9.2.2.1.1
A single entry in the table represents a single vrIpStaticRouteNh component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpStaticRouteNhRowStatusEntry  

vrIpStaticRouteNhRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.9.2.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpStaticRouteNh components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpStaticRouteNhComponentName 1.3.6.1.4.1.562.2.4.1.100.6.9.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpStaticRouteNhStorageType 1.3.6.1.4.1.562.2.4.1.100.6.9.2.2.1.1.4
This variable represents the storage type value for the vrIpStaticRouteNh tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpStaticRouteNhIndex 1.3.6.1.4.1.562.2.4.1.100.6.9.2.2.1.1.10
This variable represents the index for the vrIpStaticRouteNh tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpStaticRouteNhProvTable 1.3.6.1.4.1.562.2.4.1.100.6.9.2.2.10
This group contains a provisionable set of attributes for the Static RouteEntry NextHop component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpStaticRouteNhProvEntry

vrIpStaticRouteNhProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.9.2.2.10.1
An entry in the vrIpStaticRouteNhProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpStaticRouteNhProvEntry  

vrIpStaticRouteNhMetric 1.3.6.1.4.1.562.2.4.1.100.6.9.2.2.10.1.1
This attribute specifies the primary routing metric for this NextHop.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1..65535  

vrIpStaticDiscard 1.3.6.1.4.1.562.2.4.1.100.6.9.3
OBJECT IDENTIFIER    

vrIpStaticDiscardRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.9.3.1
This entry controls the addition and deletion of vrIpStaticDiscard components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpStaticDiscardRowStatusEntry

vrIpStaticDiscardRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.9.3.1.1
A single entry in the table represents a single vrIpStaticDiscard component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpStaticDiscardRowStatusEntry  

vrIpStaticDiscardRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.9.3.1.1.1
This variable is used as the basis for SNMP naming of vrIpStaticDiscard components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpStaticDiscardComponentName 1.3.6.1.4.1.562.2.4.1.100.6.9.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpStaticDiscardStorageType 1.3.6.1.4.1.562.2.4.1.100.6.9.3.1.1.4
This variable represents the storage type value for the vrIpStaticDiscard tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpStaticDiscardDestAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.9.3.1.1.10
This variable represents an index for the vrIpStaticDiscard tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpStaticDiscardDestMaskIndex 1.3.6.1.4.1.562.2.4.1.100.6.9.3.1.1.11
This variable represents an index for the vrIpStaticDiscard tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpNs 1.3.6.1.4.1.562.2.4.1.100.6.10
OBJECT IDENTIFIER    

vrIpNsRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.10.1
This entry controls the addition and deletion of vrIpNs components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpNsRowStatusEntry

vrIpNsRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.10.1.1
A single entry in the table represents a single vrIpNs component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpNsRowStatusEntry  

vrIpNsRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.10.1.1.1
This variable is used as the basis for SNMP naming of vrIpNs components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpNsComponentName 1.3.6.1.4.1.562.2.4.1.100.6.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpNsStorageType 1.3.6.1.4.1.562.2.4.1.100.6.10.1.1.4
This variable represents the storage type value for the vrIpNs tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpNsIndex 1.3.6.1.4.1.562.2.4.1.100.6.10.1.1.10
This variable represents the index for the vrIpNs tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpNsProvTable 1.3.6.1.4.1.562.2.4.1.100.6.10.10
This group contains provisionable attributes for the NetSentry component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpNsProvEntry

vrIpNsProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.10.10.1
An entry in the vrIpNsProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpNsProvEntry  

vrIpNsFirstFilter 1.3.6.1.4.1.562.2.4.1.100.6.10.10.1.1
The firstFilter is the first filter point which affects all IP packets before they have been examined in any way for their origin and destination. The most common use of a firstFilter point is to collect statistis for all packets arriving at the route on any interface, before any subsequent filter processing changes their direction or disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

vrIpNsLocalInFilter 1.3.6.1.4.1.562.2.4.1.100.6.10.10.1.2
The localInFilter is the second filter point which uses by network administrator to perform a common action on all IP packets that physically arrive over a specific logical interface, regardless of the packet's stated source or destination. Typical uses for a localInFilter include verifying that known Ethernet media source addresses match known IP addresses, or confirming that the IP packet source addresses of received IP packet fall within a narrow range.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

vrIpNsLocalOutFilter 1.3.6.1.4.1.562.2.4.1.100.6.10.10.1.3
The localOutFilter is the third filter point which applies to any IP packet that will be transmitted from the router to the medium associated with the interface, regardless of its source, destination, or what type of decision was made to cause the datagram to be transmitted on this interface. localOutFilter generally used to ensure that certain paterns of traffic do not enter the network or reach a second IP router on that network. For example, localOutFilter can be used as the exclusion of all IP packets above a certain security classification, or collecting statistics on the amount of IP fragments performed on an outgoing interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

vrIpNsLastFilter 1.3.6.1.4.1.562.2.4.1.100.6.10.10.1.4
lastFilter is the fourth and last filter point to be excecuted after all other routing and filtering decisions have been made on the IP packet, and transmission of the information is imminent. lastFilter is generally used to collect statistics on traffic after all previous control and routing decisions have been made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

vrIpNsApply 1.3.6.1.4.1.562.2.4.1.100.6.10.2
OBJECT IDENTIFIER    

vrIpNsApplyRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.10.2.1
This entry controls the addition and deletion of vrIpNsApply components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpNsApplyRowStatusEntry

vrIpNsApplyRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.10.2.1.1
A single entry in the table represents a single vrIpNsApply component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpNsApplyRowStatusEntry  

vrIpNsApplyRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.10.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpNsApply components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpNsApplyComponentName 1.3.6.1.4.1.562.2.4.1.100.6.10.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpNsApplyStorageType 1.3.6.1.4.1.562.2.4.1.100.6.10.2.1.1.4
This variable represents the storage type value for the vrIpNsApply tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpNsApplyIndex 1.3.6.1.4.1.562.2.4.1.100.6.10.2.1.1.10
This variable represents the index for the vrIpNsApply tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

vrIpNsApplyProvisionedTable 1.3.6.1.4.1.562.2.4.1.100.6.10.2.10
The instance of provisioned information relating to a filter application to IP packet.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpNsApplyProvisionedEntry

vrIpNsApplyProvisionedEntry 1.3.6.1.4.1.562.2.4.1.100.6.10.2.10.1
An entry in the vrIpNsApplyProvisionedTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpNsApplyProvisionedEntry  

vrIpNsApplyFilter 1.3.6.1.4.1.562.2.4.1.100.6.10.2.10.1.1
The name of the filter to be applied to packet matching the conditions in this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

vrIpNsApplyIpAddress1 1.3.6.1.4.1.562.2.4.1.100.6.10.2.10.1.2
The first IP address used to compare.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpNsApplyIpMask1 1.3.6.1.4.1.562.2.4.1.100.6.10.2.10.1.3
The first netmask associated with ipAddress1 used to compare.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpNsApplyIpAddress2 1.3.6.1.4.1.562.2.4.1.100.6.10.2.10.1.4
This second IP address used to compare.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpNsApplyIpMask2 1.3.6.1.4.1.562.2.4.1.100.6.10.2.10.1.5
This second netmask associated with ipAddress2 used to compare.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpNsApplyDirection 1.3.6.1.4.1.562.2.4.1.100.6.10.2.10.1.6
Indicates the direction a packet must be moving between the first and second apply list entries in order for the entries to match. First 'to' second, first 'from' second, or first 'tofrom' second (either direction).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER to(1), from(2), tofrom(3)  

vrIpArp 1.3.6.1.4.1.562.2.4.1.100.6.11
OBJECT IDENTIFIER    

vrIpArpRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.11.1
This entry controls the addition and deletion of vrIpArp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpArpRowStatusEntry

vrIpArpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.11.1.1
A single entry in the table represents a single vrIpArp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpArpRowStatusEntry  

vrIpArpRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.11.1.1.1
This variable is used as the basis for SNMP naming of vrIpArp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpArpComponentName 1.3.6.1.4.1.562.2.4.1.100.6.11.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpArpStorageType 1.3.6.1.4.1.562.2.4.1.100.6.11.1.1.4
This variable represents the storage type value for the vrIpArp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpArpIndex 1.3.6.1.4.1.562.2.4.1.100.6.11.1.1.10
This variable represents the index for the vrIpArp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpArpProvTable 1.3.6.1.4.1.562.2.4.1.100.6.11.10
The ARP refresh feature allows the router to periodically verify ARP table entries. Whenever the router updates an ARP entry, or creates a new entry, a timeout value is assigned to the entry. When the timeout for an entry expires, the router will send a unicast ARP request to the currently-known physical address. If an ARP response comes back, the entry will be assigned a new timeout. If, however, the host has gone away or been assigned a new physical address, the host will not respond to the unicast ARP, and the entry will be removed from the ARP table. The new physical address will be discovered through the normal ARP mechanism when the next communication is attempted to the host.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpArpProvEntry

vrIpArpProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.11.10.1
An entry in the vrIpArpProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpArpProvEntry  

vrIpArpAutoRefresh 1.3.6.1.4.1.562.2.4.1.100.6.11.10.1.1
This attribute is used to enable or disable the ARP refresh feature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrIpArpAutoRefreshTimeout 1.3.6.1.4.1.562.2.4.1.100.6.11.10.1.2
This attribute defines the timeout value, in minutes, which is assigned to updated ARP entries, or newly created ARP entries. The range for the timeout is 1 minute to 1440 minutes (24 hours).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1440  

vrIpArpHost 1.3.6.1.4.1.562.2.4.1.100.6.11.2
OBJECT IDENTIFIER    

vrIpArpHostRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.11.2.1
This entry controls the addition and deletion of vrIpArpHost components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpArpHostRowStatusEntry

vrIpArpHostRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.11.2.1.1
A single entry in the table represents a single vrIpArpHost component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpArpHostRowStatusEntry  

vrIpArpHostRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.11.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpArpHost components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpArpHostComponentName 1.3.6.1.4.1.562.2.4.1.100.6.11.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpArpHostStorageType 1.3.6.1.4.1.562.2.4.1.100.6.11.2.1.1.4
This variable represents the storage type value for the vrIpArpHost tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpArpHostHostAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.11.2.1.1.10
This variable represents the index for the vrIpArpHost tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpArpHostProvTable 1.3.6.1.4.1.562.2.4.1.100.6.11.2.10
This group contains the provisionable attributes of the HostEntry component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpArpHostProvEntry

vrIpArpHostProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.11.2.10.1
An entry in the vrIpArpHostProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpArpHostProvEntry  

vrIpArpHostPhysAddress 1.3.6.1.4.1.562.2.4.1.100.6.11.2.10.1.1
This attribute identifies the physical address of the host being defined. The value for this attribute should only be specified for media types supporting physical addresses (eg. ethernet, fddi, tokenRing etc.)
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress Size(0..8)  

vrIpArpHostMaxTxUnit 1.3.6.1.4.1.562.2.4.1.100.6.11.2.10.1.2
Specify the maximum transmit unit (MTU) size that can be accepted by the host. If this value is not specified, the value for the media interface is used. The specified MTU must be less than or equal to the interface's MTU size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..0 | 576..18944  

vrIpArpHostPermanentVirtualCircuitNumber 1.3.6.1.4.1.562.2.4.1.100.6.11.2.10.1.3
Specify a permanent virtual circuit number to the remote host on X.25 or frame relay media. The value for this attribute can only be specified for X.25 or frame relay media.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4095  

vrIpArpHostEncap 1.3.6.1.4.1.562.2.4.1.100.6.11.2.10.1.4
Specify the encapsulation type for the host. The value for this attribute should only be specified for the hosts on the ethernet media. If a value of auto is specified, the application based on the media will determine the proper applicable encapsulation type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ieee8023(1), ethernet(2), auto(3)  

vrIpArpHostOperTable 1.3.6.1.4.1.562.2.4.1.100.6.11.2.11
This group contains the operational attributes of the HostEntry component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpArpHostOperEntry

vrIpArpHostOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.11.2.11.1
An entry in the vrIpArpHostOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpArpHostOperEntry  

vrIpArpHostOperMaxTxUnit 1.3.6.1.4.1.562.2.4.1.100.6.11.2.11.1.4
This attribute indicates the operational value of the maximum transmission unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..0 | 576..18944  

vrIpArpHostOperEncap 1.3.6.1.4.1.562.2.4.1.100.6.11.2.11.1.5
This attribute indicates the operational encapsulation type. if the value of the attribute encap is set to auto, then the application will determine the encapsulation type based on the media being used and assigns the appropriate value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ieee8023(1), ethernet(2), notApplicable(3)  

vrIpArpDynHost 1.3.6.1.4.1.562.2.4.1.100.6.11.3
OBJECT IDENTIFIER    

vrIpArpDynHostRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.11.3.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpArpDynHost components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpArpDynHostRowStatusEntry

vrIpArpDynHostRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.11.3.1.1
A single entry in the table represents a single vrIpArpDynHost component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpArpDynHostRowStatusEntry  

vrIpArpDynHostRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.11.3.1.1.1
This variable is used as the basis for SNMP naming of vrIpArpDynHost components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpArpDynHostComponentName 1.3.6.1.4.1.562.2.4.1.100.6.11.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpArpDynHostStorageType 1.3.6.1.4.1.562.2.4.1.100.6.11.3.1.1.4
This variable represents the storage type value for the vrIpArpDynHost tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpArpDynHostHostAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.11.3.1.1.10
This variable represents an index for the vrIpArpDynHost tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpArpDynHostCosIndex 1.3.6.1.4.1.562.2.4.1.100.6.11.3.1.1.11
This variable represents an index for the vrIpArpDynHost tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), notApplicable(4)  

vrIpArpDynHostOperTable 1.3.6.1.4.1.562.2.4.1.100.6.11.3.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of the DynHostEntry component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpArpDynHostOperEntry

vrIpArpDynHostOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.11.3.10.1
An entry in the vrIpArpDynHostOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpArpDynHostOperEntry  

vrIpArpDynHostPhysAddress 1.3.6.1.4.1.562.2.4.1.100.6.11.3.10.1.1
This attribute indicates the physical address of the host in canonical form.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress Size(0..8)  

vrIpArpDynHostMaxTxUnit 1.3.6.1.4.1.562.2.4.1.100.6.11.3.10.1.3
This attribute indicates the maximum MTU size that can be accepted by the host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..0 | 576..18944  

vrIpArpDynHostEncapsulationType 1.3.6.1.4.1.562.2.4.1.100.6.11.3.10.1.4
This attribute indicates the encapsulation type of the host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ieee8023(1), ethernet(2), notApplicable(3)  

vrIpArpDynHostPermanentVirtualCircuitNumber 1.3.6.1.4.1.562.2.4.1.100.6.11.3.10.1.5
This attribute indicates the permanent virtual circuit number to the remote host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4095  

vrIpArpDynHostIfIndex 1.3.6.1.4.1.562.2.4.1.100.6.11.3.10.1.6
This attribute indicates the ifIndex of the protocol port that is associated with this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex 1..65535  

vrIpArpDynHostType 1.3.6.1.4.1.562.2.4.1.100.6.11.3.10.1.7
This attribute indicates how this entry was learned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pending(1), invalid(2), dynamic(3), static(4)  

vrIpArpDynHostNcPhysAddress 1.3.6.1.4.1.562.2.4.1.100.6.11.3.10.1.8
This attribute indicates the physical address of the host in non-canonical form. This attribute is not displayed for hosts on non-LAN media.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress Size(0..8)  

vrIpIcmp 1.3.6.1.4.1.562.2.4.1.100.6.12
OBJECT IDENTIFIER    

vrIpIcmpRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.12.1
This entry controls the addition and deletion of vrIpIcmp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpIcmpRowStatusEntry

vrIpIcmpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.12.1.1
A single entry in the table represents a single vrIpIcmp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpIcmpRowStatusEntry  

vrIpIcmpRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.12.1.1.1
This variable is used as the basis for SNMP naming of vrIpIcmp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpIcmpComponentName 1.3.6.1.4.1.562.2.4.1.100.6.12.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpIcmpStorageType 1.3.6.1.4.1.562.2.4.1.100.6.12.1.1.4
This variable represents the storage type value for the vrIpIcmp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpIcmpIndex 1.3.6.1.4.1.562.2.4.1.100.6.12.1.1.10
This variable represents the index for the vrIpIcmp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpIcmpProvTable 1.3.6.1.4.1.562.2.4.1.100.6.12.10
This group holds provisioned attributes for ICMP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpIcmpProvEntry

vrIpIcmpProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.12.10.1
An entry in the vrIpIcmpProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpIcmpProvEntry  

vrIpIcmpSendRedirect 1.3.6.1.4.1.562.2.4.1.100.6.12.10.1.1
This attribute specifies whether an ICMP redirect will be sent. If enabled, the router may send an ICMP redirect if a an Ip packet is being routed out the same logicalInterface as it was received on. The router will only send host ICMP redirects. If disabled, the router will never send a ICMP redirect.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrIpIcmpSendHostUnreachable 1.3.6.1.4.1.562.2.4.1.100.6.12.10.1.2
This attribute specifies whether host unreachable will be sent or not.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrIpIcmpStatsTable 1.3.6.1.4.1.562.2.4.1.100.6.12.11
This group holds statistics for ICMP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpIcmpStatsEntry

vrIpIcmpStatsEntry 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1
An entry in the vrIpIcmpStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpIcmpStatsEntry  

vrIpIcmpInMsgs 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.1
This attribute indicates the number of ICMP messages received by this gateway. This number includes inErrors. inMsgs wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpInErrors 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.2
This attribute indicates the number of ICMP messages received by this gateway but determined as having ICMP specific errors such as bad ICMP checksums or bad length. inErrors wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpInDestUnreachs 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.3
This attribute indicates the number of ICMP destination unreachable messages received by this gateway. inDestUnreachs wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpInTimeExcds 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.4
This attribute indicates the number of ICMP time exceeded messages received by this gateway. inTimeExcds wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpInParmProbs 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.5
This attribute indicates the number of ICMP parameter problem messages received by this gateway. inParmProbs wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpInSrcQuenchs 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.6
This attribute indicates the number of ICMP source quench messages received by this gateway. inSrcQuenchs wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpInRedirects 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.7
This attribute indicates the number of ICMP redirect messages received by this gateway. inRedirects wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpInEchos 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.8
This attribute indicates the number of ICMP echo request messages received by this gateway. inEchos wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpInEchoReps 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.9
This attribute indicates the number of ICMP echo reply messages received by this gateway. inEchoReps wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpInTimestamps 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.10
This attribute indicates the number of ICMP timestamp request messages received by this gateway. inTimeStamps wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpInTimestampReps 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.11
This attribute indicates the number of ICMP timestamp reply messages received by this gateway. inTimeStampReps wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpInAddrMasks 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.12
This attribute indicates the number of ICMP address mask request messages received by this gateway. inAddrMasks wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpInAddrMaskReps 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.13
This attribute indicates the number of ICMP address mask reply messages received by this gateway. inAddrMaskReps wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpOutMsgs 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.14
This attribute indicates the number of ICMP messages which this gateway attempted to send. This number includes outErrors. outMsgs wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpOutErrors 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.15
This attribute indicates the number of ICMP messages which this gateway did not send due to problems discovered within ICMP such as a lack of buffers. outErrors does not included errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. outErrors wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpOutDestUnreachs 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.16
This attribute indicates the number of ICMP destination unreachable messages sent by this gateway. outDestUnreachs wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpOutTimeExcds 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.17
This attribute indicates the number of ICMP time exceeded messages sent by this gateway. outTimeExcds wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpOutParmProbs 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.18
This attribute indicates the number of ICMP parameter problem messages sent by this gateway. outParmProbs wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpOutSrcQuenchs 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.19
This attribute indicates the number of ICMP source quench messages sent by this gateway. ourSrcQuench wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpOutRedirects 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.20
This attribute indicates the number of ICMP redirect messages sent by this gateway. outRedirects wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpOutEchos 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.21
This attribute indicates the number of ICMP echo request messages sent by this gateway. outEchos wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpOutEchoReps 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.22
This attribute indicates the number of ICMP echo reply messages sent by this gateway. outEchoReps wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpOutTimestamps 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.23
This attribute indicates the number of ICMP timestamp request messages sent by this gateway. outTimeStamps wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpOutTimestampReps 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.24
This attribute indicates the number of ICMP timestamp reply messages sent by this gateway. outTimeStampReps wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpOutAddrMasks 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.25
This attribute indicates the number of ICMP address mask request messages sent by this gateway. outAddrMasks wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpOutAddrMaskReps 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.26
This attribute indicates the number of ICMP address mask reply message sent by this gateway. outAddrMaskReps wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpInRtrAdvs 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.27
This attribute indicates the number of ICMP router advertisement messages received by this gateway. inRtrAdvs wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpInRtrSolicits 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.28
This attribute indicates the number of ICMP router solicitation messages received by this gateway. inRtrSolicits wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpOutRtrAdvs 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.29
This attribute indicates the number of ICMP router advertisement messages sent by this gateway. outRtrAdvs wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpIcmpOutRtrSolicits 1.3.6.1.4.1.562.2.4.1.100.6.12.11.1.30
This attribute indicates the number of ICMP router solicitation messages sent by this gateway. outRtrSolicits wraps to zero if it reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpRelayBC 1.3.6.1.4.1.562.2.4.1.100.6.13
OBJECT IDENTIFIER    

vrIpRelayBCRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.13.1
This entry controls the addition and deletion of vrIpRelayBC components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRelayBCRowStatusEntry

vrIpRelayBCRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.13.1.1
A single entry in the table represents a single vrIpRelayBC component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRelayBCRowStatusEntry  

vrIpRelayBCRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.13.1.1.1
This variable is used as the basis for SNMP naming of vrIpRelayBC components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpRelayBCComponentName 1.3.6.1.4.1.562.2.4.1.100.6.13.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpRelayBCStorageType 1.3.6.1.4.1.562.2.4.1.100.6.13.1.1.4
This variable represents the storage type value for the vrIpRelayBC tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpRelayBCIndex 1.3.6.1.4.1.562.2.4.1.100.6.13.1.1.10
This variable represents the index for the vrIpRelayBC tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpRelayBCProvTable 1.3.6.1.4.1.562.2.4.1.100.6.13.10
This group contains global configuration attributes for the Relay Broadcast component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRelayBCProvEntry

vrIpRelayBCProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.13.10.1
An entry in the vrIpRelayBCProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRelayBCProvEntry  

vrIpRelayBCRelayStatus 1.3.6.1.4.1.562.2.4.1.100.6.13.10.1.1
Specifies whether or not IP will forward IP broadcast packets that were received as Link-Layer broadcasts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrIpRelayBCRelayNdStatus 1.3.6.1.4.1.562.2.4.1.100.6.13.10.1.2
Specifies whether or not IP will forward broadcast packets whose protocol is Sun ND.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrIpRelayBCOperTable 1.3.6.1.4.1.562.2.4.1.100.6.13.11
This group contains RelayBroadcast component statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRelayBCOperEntry

vrIpRelayBCOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.13.11.1
An entry in the vrIpRelayBCOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRelayBCOperEntry  

vrIpRelayBCRelayNdCount 1.3.6.1.4.1.562.2.4.1.100.6.13.11.1.1
Indicates the number of Sun ND packets received by this router which were forwarded. relayNdCount wraps to zero if reached its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpRelayBCPort 1.3.6.1.4.1.562.2.4.1.100.6.13.2
OBJECT IDENTIFIER    

vrIpRelayBCPortRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.13.2.1
This entry controls the addition and deletion of vrIpRelayBCPort components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRelayBCPortRowStatusEntry

vrIpRelayBCPortRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.13.2.1.1
A single entry in the table represents a single vrIpRelayBCPort component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRelayBCPortRowStatusEntry  

vrIpRelayBCPortRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.13.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpRelayBCPort components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpRelayBCPortComponentName 1.3.6.1.4.1.562.2.4.1.100.6.13.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpRelayBCPortStorageType 1.3.6.1.4.1.562.2.4.1.100.6.13.2.1.1.4
This variable represents the storage type value for the vrIpRelayBCPort tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpRelayBCPortPortNumIndex 1.3.6.1.4.1.562.2.4.1.100.6.13.2.1.1.10
This variable represents the index for the vrIpRelayBCPort tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..268435455  

vrIpRelayBCPortOperTable 1.3.6.1.4.1.562.2.4.1.100.6.13.2.10
This group contains statistics related to InwPortEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpRelayBCPortOperEntry

vrIpRelayBCPortOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.13.2.10.1
An entry in the vrIpRelayBCPortOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpRelayBCPortOperEntry  

vrIpRelayBCPortRelayBcUdpCount 1.3.6.1.4.1.562.2.4.1.100.6.13.2.10.1.1
Indicates the number of forwarded packets with this destination UDP port number. relayBcUdpCount wraps to zero if reached its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpUdp 1.3.6.1.4.1.562.2.4.1.100.6.14
OBJECT IDENTIFIER    

vrIpUdpRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.14.1
This entry controls the addition and deletion of vrIpUdp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpUdpRowStatusEntry

vrIpUdpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.14.1.1
A single entry in the table represents a single vrIpUdp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpUdpRowStatusEntry  

vrIpUdpRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.14.1.1.1
This variable is used as the basis for SNMP naming of vrIpUdp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpUdpComponentName 1.3.6.1.4.1.562.2.4.1.100.6.14.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpUdpStorageType 1.3.6.1.4.1.562.2.4.1.100.6.14.1.1.4
This variable represents the storage type value for the vrIpUdp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpUdpIndex 1.3.6.1.4.1.562.2.4.1.100.6.14.1.1.10
This variable represents the index for the vrIpUdp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpUdpStatsTable 1.3.6.1.4.1.562.2.4.1.100.6.14.10
This group holds statictics for UDP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpUdpStatsEntry

vrIpUdpStatsEntry 1.3.6.1.4.1.562.2.4.1.100.6.14.10.1
An entry in the vrIpUdpStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpUdpStatsEntry  

vrIpUdpInDatagrams 1.3.6.1.4.1.562.2.4.1.100.6.14.10.1.1
The number of UDP datagrams delivered to UDP users. inDatagrams wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpUdpNoPorts 1.3.6.1.4.1.562.2.4.1.100.6.14.10.1.2
The number of UDP datagrams received for which there was no application at the destination port. noPorts wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpUdpInErrors 1.3.6.1.4.1.562.2.4.1.100.6.14.10.1.3
The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. inErrors wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpUdpOutDatagrams 1.3.6.1.4.1.562.2.4.1.100.6.14.10.1.4
The number of UDP datagrams sent from this gateway. outDatagrams wraps to zero if reaches its maximum defined value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpUdpListenEntry 1.3.6.1.4.1.562.2.4.1.100.6.14.2
OBJECT IDENTIFIER    

vrIpUdpListenEntryRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.14.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpUdpListenEntry components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpUdpListenEntryRowStatusEntry

vrIpUdpListenEntryRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.14.2.1.1
A single entry in the table represents a single vrIpUdpListenEntry component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpUdpListenEntryRowStatusEntry  

vrIpUdpListenEntryRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.14.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpUdpListenEntry components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpUdpListenEntryComponentName 1.3.6.1.4.1.562.2.4.1.100.6.14.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpUdpListenEntryStorageType 1.3.6.1.4.1.562.2.4.1.100.6.14.2.1.1.4
This variable represents the storage type value for the vrIpUdpListenEntry tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpUdpListenEntryLocalAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.14.2.1.1.10
This variable represents an index for the vrIpUdpListenEntry tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpUdpListenEntryLocalPortIndex 1.3.6.1.4.1.562.2.4.1.100.6.14.2.1.1.11
This variable represents an index for the vrIpUdpListenEntry tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

vrIpTcp 1.3.6.1.4.1.562.2.4.1.100.6.15
OBJECT IDENTIFIER    

vrIpTcpRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.15.1
This entry controls the addition and deletion of vrIpTcp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpTcpRowStatusEntry

vrIpTcpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.15.1.1
A single entry in the table represents a single vrIpTcp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpTcpRowStatusEntry  

vrIpTcpRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.15.1.1.1
This variable is used as the basis for SNMP naming of vrIpTcp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpTcpComponentName 1.3.6.1.4.1.562.2.4.1.100.6.15.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpTcpStorageType 1.3.6.1.4.1.562.2.4.1.100.6.15.1.1.4
This variable represents the storage type value for the vrIpTcp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpTcpIndex 1.3.6.1.4.1.562.2.4.1.100.6.15.1.1.10
This variable represents the index for the vrIpTcp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpTcpStatsTable 1.3.6.1.4.1.562.2.4.1.100.6.15.10
This group contains statistics for TCP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpTcpStatsEntry

vrIpTcpStatsEntry 1.3.6.1.4.1.562.2.4.1.100.6.15.10.1
An entry in the vrIpTcpStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpTcpStatsEntry  

vrIpTcpRToAlgorithm 1.3.6.1.4.1.562.2.4.1.100.6.15.10.1.1
Indicate which algorithm was used to calculate the timeout value used for retransmitting unackowledged octet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), constant(2), rsre(3), vanJacobson(4)  

vrIpTcpRToMin 1.3.6.1.4.1.562.2.4.1.100.6.15.10.1.2
Indicate the minimum value, measured in milliseconds, allowed for retransmission timeout.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpTcpRToMax 1.3.6.1.4.1.562.2.4.1.100.6.15.10.1.3
Indicates the maximun value, measured in milliseconds, allowed for retransmission timeout.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpTcpMaxConn 1.3.6.1.4.1.562.2.4.1.100.6.15.10.1.4
Limit on number of connections the TCP can support. The value is always -1 which indicates that the number of connections supported is dynamic (limited by memory in the system).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1  

vrIpTcpActiveOpens 1.3.6.1.4.1.562.2.4.1.100.6.15.10.1.5
The number of times TCP connections have made a direct transition to the synSent state from the closed state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpTcpPassiveOpens 1.3.6.1.4.1.562.2.4.1.100.6.15.10.1.6
The number of times TCP connections have made a direct transition to the synRcvd state from the listen state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpTcpAttemptFails 1.3.6.1.4.1.562.2.4.1.100.6.15.10.1.7
The number of times TCP connections have made a direct transition to the closed state from either the synSent state or the synRcvd state, plus the number of times TCP connections have made a direct transition to the listen state from the synRcvd state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpTcpEstabResets 1.3.6.1.4.1.562.2.4.1.100.6.15.10.1.8
The number of times TCP connections have made a direct transition to the closed state from either the established state or the closedWait state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpTcpCurrEstab 1.3.6.1.4.1.562.2.4.1.100.6.15.10.1.9
The number of TCP connections for which the current state is either established or closedWait.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

vrIpTcpInSegs 1.3.6.1.4.1.562.2.4.1.100.6.15.10.1.10
The number of segments received, including those received in error. This count includes segments received on currently established connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpTcpOutSegs 1.3.6.1.4.1.562.2.4.1.100.6.15.10.1.11
The number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpTcpRetransSegs 1.3.6.1.4.1.562.2.4.1.100.6.15.10.1.12
The number of segments retransmitted that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpTcpInErrs 1.3.6.1.4.1.562.2.4.1.100.6.15.10.1.13
Total number of segments received in error, for example bad TCP checksum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpTcpOutRsts 1.3.6.1.4.1.562.2.4.1.100.6.15.10.1.14
Number of TCP segments sent containing the RST flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpTcpTcpEntry 1.3.6.1.4.1.562.2.4.1.100.6.15.2
OBJECT IDENTIFIER    

vrIpTcpTcpEntryRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.15.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpTcpTcpEntry components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpTcpTcpEntryRowStatusEntry

vrIpTcpTcpEntryRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.15.2.1.1
A single entry in the table represents a single vrIpTcpTcpEntry component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpTcpTcpEntryRowStatusEntry  

vrIpTcpTcpEntryRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.15.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpTcpTcpEntry components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpTcpTcpEntryComponentName 1.3.6.1.4.1.562.2.4.1.100.6.15.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpTcpTcpEntryStorageType 1.3.6.1.4.1.562.2.4.1.100.6.15.2.1.1.4
This variable represents the storage type value for the vrIpTcpTcpEntry tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpTcpTcpEntryLocalAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.15.2.1.1.10
This variable represents an index for the vrIpTcpTcpEntry tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpTcpTcpEntryLocalPortIndex 1.3.6.1.4.1.562.2.4.1.100.6.15.2.1.1.11
This variable represents an index for the vrIpTcpTcpEntry tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

vrIpTcpTcpEntryRemoteAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.15.2.1.1.12
This variable represents an index for the vrIpTcpTcpEntry tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpTcpTcpEntryRemotePortIndex 1.3.6.1.4.1.562.2.4.1.100.6.15.2.1.1.13
This variable represents an index for the vrIpTcpTcpEntry tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

vrIpTcpTcpEntryOperTable 1.3.6.1.4.1.562.2.4.1.100.6.15.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains columnar entries for each end-point on the TCP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpTcpTcpEntryOperEntry

vrIpTcpTcpEntryOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.15.2.10.1
An entry in the vrIpTcpTcpEntryOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpTcpTcpEntryOperEntry  

vrIpTcpTcpEntryState 1.3.6.1.4.1.562.2.4.1.100.6.15.2.10.1.1
This attribute reflects the current state of this Tcp connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER closed(1), listen(2), synSent(3), synReceived(4), established(5), closeWait(6), finWait1(7), closing(8), lastAck(9), finWait2(10), timeWait(11), delete(12)  

vrIpBootp 1.3.6.1.4.1.562.2.4.1.100.6.16
OBJECT IDENTIFIER    

vrIpBootpRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.16.1
This entry controls the addition and deletion of vrIpBootp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpBootpRowStatusEntry

vrIpBootpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.16.1.1
A single entry in the table represents a single vrIpBootp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpBootpRowStatusEntry  

vrIpBootpRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.16.1.1.1
This variable is used as the basis for SNMP naming of vrIpBootp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpBootpComponentName 1.3.6.1.4.1.562.2.4.1.100.6.16.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpBootpStorageType 1.3.6.1.4.1.562.2.4.1.100.6.16.1.1.4
This variable represents the storage type value for the vrIpBootp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpBootpIndex 1.3.6.1.4.1.562.2.4.1.100.6.16.1.1.10
This variable represents the index for the vrIpBootp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpBootpAdminControlTable 1.3.6.1.4.1.562.2.4.1.100.6.16.10
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpBootpAdminControlEntry

vrIpBootpAdminControlEntry 1.3.6.1.4.1.562.2.4.1.100.6.16.10.1
An entry in the vrIpBootpAdminControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpBootpAdminControlEntry  

vrIpBootpSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.6.16.10.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpBootpProvTable 1.3.6.1.4.1.562.2.4.1.100.6.16.11
This group contains provisionable attributes for the BootpRelayAgent component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpBootpProvEntry

vrIpBootpProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.16.11.1
An entry in the vrIpBootpProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpBootpProvEntry  

vrIpBootpHopDiscardThreshold 1.3.6.1.4.1.562.2.4.1.100.6.16.11.1.1
BOOTP packets contain a 'hops' field which is used to limit the number of relay agents that can process the packet (each relay agent increments the 'hops' field by one). This attribute is used by the relay agent to determine when to discard a BOOTP packet. If the 'hops' field exceeds the hopDiscardThreshold the BOOTP packet will be discarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 2..16  

vrIpBootpStateTable 1.3.6.1.4.1.562.2.4.1.100.6.16.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpBootpStateEntry

vrIpBootpStateEntry 1.3.6.1.4.1.562.2.4.1.100.6.16.12.1
An entry in the vrIpBootpStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpBootpStateEntry  

vrIpBootpAdminState 1.3.6.1.4.1.562.2.4.1.100.6.16.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrIpBootpOperationalState 1.3.6.1.4.1.562.2.4.1.100.6.16.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpBootpUsageState 1.3.6.1.4.1.562.2.4.1.100.6.16.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrIpBootpOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.16.13
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpBootpOperStatusEntry

vrIpBootpOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.16.13.1
An entry in the vrIpBootpOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpBootpOperStatusEntry  

vrIpBootpSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.6.16.13.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpBootpPpE 1.3.6.1.4.1.562.2.4.1.100.6.16.2
OBJECT IDENTIFIER    

vrIpBootpPpERowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.16.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpBootpPpE components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpBootpPpERowStatusEntry

vrIpBootpPpERowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.16.2.1.1
A single entry in the table represents a single vrIpBootpPpE component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpBootpPpERowStatusEntry  

vrIpBootpPpERowStatus 1.3.6.1.4.1.562.2.4.1.100.6.16.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpBootpPpE components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpBootpPpEComponentName 1.3.6.1.4.1.562.2.4.1.100.6.16.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpBootpPpEStorageType 1.3.6.1.4.1.562.2.4.1.100.6.16.2.1.1.4
This variable represents the storage type value for the vrIpBootpPpE tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpBootpPpEIndex 1.3.6.1.4.1.562.2.4.1.100.6.16.2.1.1.10
This variable represents the index for the vrIpBootpPpE tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..20)  

vrIpBootpPpEOperTable 1.3.6.1.4.1.562.2.4.1.100.6.16.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains BootpPortEntry component operational data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpBootpPpEOperEntry

vrIpBootpPpEOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.16.2.10.1
An entry in the vrIpBootpPpEOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpBootpPpEOperEntry  

vrIpBootpPpEStatus 1.3.6.1.4.1.562.2.4.1.100.6.16.2.10.1.1
This attribute indicates the status of the provisioned BootpPortEntry component. A value of disabled is used when the parent components, Vr, Ip, IpPort, or BootpRelayAgent is in a disabled state. A value of up is used when the BootpPortEntry is in an operational state. A state of down is used if the media associated with the BootpPortEntry is not ready or disabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), disabled(3)  

vrIpBootpPpEStatsTable 1.3.6.1.4.1.562.2.4.1.100.6.16.2.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains BootpPortEntry component statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpBootpPpEStatsEntry

vrIpBootpPpEStatsEntry 1.3.6.1.4.1.562.2.4.1.100.6.16.2.11.1
An entry in the vrIpBootpPpEStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpBootpPpEStatsEntry  

vrIpBootpPpEInRequests 1.3.6.1.4.1.562.2.4.1.100.6.16.2.11.1.1
This attribute counts the total number of BOOTP Request messages received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpBootpPpEInReplies 1.3.6.1.4.1.562.2.4.1.100.6.16.2.11.1.2
This attribute counts the total number of BOOTP Reply messages received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpBootpPpEOutRequests 1.3.6.1.4.1.562.2.4.1.100.6.16.2.11.1.3
This attribute counts total the number of BOOTP Request messages broadcast out on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpBootpPpEOutReplies 1.3.6.1.4.1.562.2.4.1.100.6.16.2.11.1.4
This attribute counts the total number of BOOTP Reply messages sent out on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpBootpPpEInRequestErrors 1.3.6.1.4.1.562.2.4.1.100.6.16.2.11.1.5
This attribute counts the number of BOOTP Request messages received on this port but not forwarded due to an error. An error occurs if the BOOTP hop limit has been exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpBootpPpEInReplyErrors 1.3.6.1.4.1.562.2.4.1.100.6.16.2.11.1.6
This attribute counts the number of BOOTP Reply messages received on this port but not forwarded due to an error. An error occurs if the giaddr field in the BOOTP reply does not match an IP address assigned to this VirtualRouter, or if the output IpPort for the BOOTP reply is not provisioned for BOOTP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpCache 1.3.6.1.4.1.562.2.4.1.100.6.17
OBJECT IDENTIFIER    

vrIpCacheRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.17.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpCache components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpCacheRowStatusEntry

vrIpCacheRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.17.1.1
A single entry in the table represents a single vrIpCache component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpCacheRowStatusEntry  

vrIpCacheRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.17.1.1.1
This variable is used as the basis for SNMP naming of vrIpCache components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpCacheComponentName 1.3.6.1.4.1.562.2.4.1.100.6.17.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpCacheStorageType 1.3.6.1.4.1.562.2.4.1.100.6.17.1.1.4
This variable represents the storage type value for the vrIpCache tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpCacheIndex 1.3.6.1.4.1.562.2.4.1.100.6.17.1.1.10
This variable represents the index for the vrIpCache tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..15  

vrIpCacheStateTable 1.3.6.1.4.1.562.2.4.1.100.6.17.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpCacheStateEntry

vrIpCacheStateEntry 1.3.6.1.4.1.562.2.4.1.100.6.17.10.1
An entry in the vrIpCacheStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpCacheStateEntry  

vrIpCacheAdminState 1.3.6.1.4.1.562.2.4.1.100.6.17.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrIpCacheOperationalState 1.3.6.1.4.1.562.2.4.1.100.6.17.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpCacheUsageState 1.3.6.1.4.1.562.2.4.1.100.6.17.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrIpCacheOperTable 1.3.6.1.4.1.562.2.4.1.100.6.17.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group houses all the operational attributes of an Ip cache table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpCacheOperEntry

vrIpCacheOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.17.11.1
An entry in the vrIpCacheOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpCacheOperEntry  

vrIpCacheEntriesFree 1.3.6.1.4.1.562.2.4.1.100.6.17.11.1.3
This attribute is indicative of the number of free Ip cache table entries. A consistently high value for this attribute indicates that there is a resource surplus of the memory requirements for cache table. This surplus could be utilized elsewhere if needed by adjusting the cacheTableMaxEntries under the Ip component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..8000  

vrIpCacheTotalLookups 1.3.6.1.4.1.562.2.4.1.100.6.17.11.1.4
This attribute indicates the total number of local cache lookups. It wraps around to 0 when it reaches the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpCacheLookupMisses 1.3.6.1.4.1.562.2.4.1.100.6.17.11.1.5
This attribute indicates the total number of local cache lookup misses. It wraps around to 0 when it reaches the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpCacheCacheTableMaxEntries 1.3.6.1.4.1.562.2.4.1.100.6.17.11.1.395
This attribute indicates the current maximum number of entries that can exist in the IP local cache table on each LP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..8000  

vrIpTunnel 1.3.6.1.4.1.562.2.4.1.100.6.18
OBJECT IDENTIFIER    

vrIpTunnelRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.18.1
This entry controls the addition and deletion of vrIpTunnel components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpTunnelRowStatusEntry

vrIpTunnelRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.18.1.1
A single entry in the table represents a single vrIpTunnel component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpTunnelRowStatusEntry  

vrIpTunnelRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.18.1.1.1
This variable is used as the basis for SNMP naming of vrIpTunnel components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpTunnelComponentName 1.3.6.1.4.1.562.2.4.1.100.6.18.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpTunnelStorageType 1.3.6.1.4.1.562.2.4.1.100.6.18.1.1.4
This variable represents the storage type value for the vrIpTunnel tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpTunnelIndex 1.3.6.1.4.1.562.2.4.1.100.6.18.1.1.10
This variable represents the index for the vrIpTunnel tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpTunnelStateTable 1.3.6.1.4.1.562.2.4.1.100.6.18.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpTunnelStateEntry

vrIpTunnelStateEntry 1.3.6.1.4.1.562.2.4.1.100.6.18.10.1
An entry in the vrIpTunnelStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpTunnelStateEntry  

vrIpTunnelAdminState 1.3.6.1.4.1.562.2.4.1.100.6.18.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrIpTunnelOperationalState 1.3.6.1.4.1.562.2.4.1.100.6.18.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpTunnelUsageState 1.3.6.1.4.1.562.2.4.1.100.6.18.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrIpTunnelSep 1.3.6.1.4.1.562.2.4.1.100.6.18.2
OBJECT IDENTIFIER    

vrIpTunnelSepRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.18.2.1
This entry controls the addition and deletion of vrIpTunnelSep components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpTunnelSepRowStatusEntry

vrIpTunnelSepRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.18.2.1.1
A single entry in the table represents a single vrIpTunnelSep component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpTunnelSepRowStatusEntry  

vrIpTunnelSepRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.18.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpTunnelSep components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpTunnelSepComponentName 1.3.6.1.4.1.562.2.4.1.100.6.18.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpTunnelSepStorageType 1.3.6.1.4.1.562.2.4.1.100.6.18.2.1.1.4
This variable represents the storage type value for the vrIpTunnelSep tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpTunnelSepIndex 1.3.6.1.4.1.562.2.4.1.100.6.18.2.1.1.10
This variable represents the index for the vrIpTunnelSep tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..63  

vrIpTunnelSepIfEntryTable 1.3.6.1.4.1.562.2.4.1.100.6.18.2.10
This group contains the provisionable attributes for the ifEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpTunnelSepIfEntryEntry

vrIpTunnelSepIfEntryEntry 1.3.6.1.4.1.562.2.4.1.100.6.18.2.10.1
An entry in the vrIpTunnelSepIfEntryTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpTunnelSepIfEntryEntry  

vrIpTunnelSepIfAdminStatus 1.3.6.1.4.1.562.2.4.1.100.6.18.2.10.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpTunnelSepIfIndex 1.3.6.1.4.1.562.2.4.1.100.6.18.2.10.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex 1..65535  

vrIpTunnelSepMpTable 1.3.6.1.4.1.562.2.4.1.100.6.18.2.11
This group contains the base provisioning data for the media base component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpTunnelSepMpEntry

vrIpTunnelSepMpEntry 1.3.6.1.4.1.562.2.4.1.100.6.18.2.11.1
An entry in the vrIpTunnelSepMpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpTunnelSepMpEntry  

vrIpTunnelSepLinkToProtocolPort 1.3.6.1.4.1.562.2.4.1.100.6.18.2.11.1.1
This attribute specifies the ProtocolPort to which this interface is linked to. The protocol port is the logical interface to the network. The protocol port component describes the logical characteristics of this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

vrIpTunnelSepProvTable 1.3.6.1.4.1.562.2.4.1.100.6.18.2.12
This group contains the provisionable attributes for the StaticEndPoint component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpTunnelSepProvEntry

vrIpTunnelSepProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.18.2.12.1
An entry in the vrIpTunnelSepProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpTunnelSepProvEntry  

vrIpTunnelSepEncapType 1.3.6.1.4.1.562.2.4.1.100.6.18.2.12.1.1
There are two types of encapsulation techniques for IP tunnel, IP in IP (RFC 2003) and GRE over IP (RFC 1701). This attributes specifies the encapsulation type of the IP tunnel. It defaults to ipInIp. ipInIp: As defined in RFC 2003, it can be used to encapsulated IP and IP payload only. If IP is the only type of payload to be encapsulated by the tunnel, this type of encapsulation is recommended as it requires less processing and uses less bandwidth. greIp: As defined in RFC 1701, it can be used to encapsulate IP or IPX payload. To encapsulate IPX payload, this encapsulation type must be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ipInIp(0), greIp(1)  

vrIpTunnelSepSourceAddress 1.3.6.1.4.1.562.2.4.1.100.6.18.2.12.1.2
This attribute specifies the IP address of the local end of the tunnel. The source address must be an address in the shared domain, and it must equal to an interface address on its own Virtual Router (under Vr/ Pp/ IpPort LogicalIf/). However, it must not be the interface address of the linked protocol port's IpPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpTunnelSepDestinationAddress 1.3.6.1.4.1.562.2.4.1.100.6.18.2.12.1.3
This attribute specifies the IP address of the far end of the tunnel. It must not match any of the IP interface addresses on this Virtual Router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrIpTunnelSepOperTable 1.3.6.1.4.1.562.2.4.1.100.6.18.2.14
This group contains the operational status attributes of the StaticEndPoint component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpTunnelSepOperEntry

vrIpTunnelSepOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.18.2.14.1
An entry in the vrIpTunnelSepOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpTunnelSepOperEntry  

vrIpTunnelSepPathMtu 1.3.6.1.4.1.562.2.4.1.100.6.18.2.14.1.1
This attribute indicates the latest learned Path MTU of the tunnel. MTU is the maximum transmission unit of an arbitrary internet path. When a large amount of IP datagrams are to be transmitted, it is usually preferable that the datagrams be of the largest size that does not require fragmentation anywhere along the path from the source to the destination. This datagram size is referred to as the Path MTU (PMTU), and it is equal to the minimum of the MTUs of each hop in the path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..0 | 576..18944  

vrIpMcast 1.3.6.1.4.1.562.2.4.1.100.6.26
OBJECT IDENTIFIER    

vrIpMcastRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.1
This entry controls the addition and deletion of vrIpMcast components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastRowStatusEntry

vrIpMcastRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.1.1
A single entry in the table represents a single vrIpMcast component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastRowStatusEntry  

vrIpMcastRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcast components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpMcastComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.1.1.4
This variable represents the storage type value for the vrIpMcast tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.1.1.10
This variable represents the index for the vrIpMcast tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpMcastAdminControlTable 1.3.6.1.4.1.562.2.4.1.100.6.26.100
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastAdminControlEntry

vrIpMcastAdminControlEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.100.1
An entry in the vrIpMcastAdminControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastAdminControlEntry  

vrIpMcastSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.100.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpMcastStateTable 1.3.6.1.4.1.562.2.4.1.100.6.26.103
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastStateEntry

vrIpMcastStateEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.103.1
An entry in the vrIpMcastStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastStateEntry  

vrIpMcastAdminState 1.3.6.1.4.1.562.2.4.1.100.6.26.103.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrIpMcastOperationalState 1.3.6.1.4.1.562.2.4.1.100.6.26.103.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpMcastUsageState 1.3.6.1.4.1.562.2.4.1.100.6.26.103.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrIpMcastOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.104
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastOperStatusEntry

vrIpMcastOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.104.1
An entry in the vrIpMcastOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastOperStatusEntry  

vrIpMcastSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.104.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpMcastCtsTable 1.3.6.1.4.1.562.2.4.1.100.6.26.701
This attribute specifies the maximum number of entries supported in the IP Multicast cache table on each LP. The default is 100 for a CP and 200 for an FP. The value must be multiple of 100.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastCtsEntry

vrIpMcastCtsEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.701.1
An entry in the vrIpMcastCtsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastCtsEntry  

vrIpMcastCtsIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.701.1.1
This variable represents the vrIpMcastCtsTable specific index for the vrIpMcastCtsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..15  

vrIpMcastCtsValue 1.3.6.1.4.1.562.2.4.1.100.6.26.701.1.2
This variable represents an individual value for the vrIpMcastCtsTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 100..500  

vrIpMcastIgmp 1.3.6.1.4.1.562.2.4.1.100.6.26.2
OBJECT IDENTIFIER    

vrIpMcastIgmpRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.2.1
This entry controls the addition and deletion of vrIpMcastIgmp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastIgmpRowStatusEntry

vrIpMcastIgmpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.2.1.1
A single entry in the table represents a single vrIpMcastIgmp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastIgmpRowStatusEntry  

vrIpMcastIgmpRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastIgmp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpMcastIgmpComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastIgmpStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.2.1.1.4
This variable represents the storage type value for the vrIpMcastIgmp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastIgmpIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.2.1.1.10
This variable represents the index for the vrIpMcastIgmp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpMcastIgmpAdminControlTable 1.3.6.1.4.1.562.2.4.1.100.6.26.2.10
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastIgmpAdminControlEntry

vrIpMcastIgmpAdminControlEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.2.10.1
An entry in the vrIpMcastIgmpAdminControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastIgmpAdminControlEntry  

vrIpMcastIgmpSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.2.10.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpMcastIgmpStateTable 1.3.6.1.4.1.562.2.4.1.100.6.26.2.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastIgmpStateEntry

vrIpMcastIgmpStateEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.2.12.1
An entry in the vrIpMcastIgmpStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastIgmpStateEntry  

vrIpMcastIgmpAdminState 1.3.6.1.4.1.562.2.4.1.100.6.26.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrIpMcastIgmpOperationalState 1.3.6.1.4.1.562.2.4.1.100.6.26.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpMcastIgmpUsageState 1.3.6.1.4.1.562.2.4.1.100.6.26.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrIpMcastIgmpOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.2.13
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastIgmpOperStatusEntry

vrIpMcastIgmpOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.2.13.1
An entry in the vrIpMcastIgmpOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastIgmpOperStatusEntry  

vrIpMcastIgmpSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.2.13.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpMcastIgmpGc 1.3.6.1.4.1.562.2.4.1.100.6.26.2.2
OBJECT IDENTIFIER    

vrIpMcastIgmpGcRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.2.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpMcastIgmpGc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastIgmpGcRowStatusEntry

vrIpMcastIgmpGcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.2.2.1.1
A single entry in the table represents a single vrIpMcastIgmpGc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastIgmpGcRowStatusEntry  

vrIpMcastIgmpGcRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.2.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastIgmpGc components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpMcastIgmpGcComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastIgmpGcStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.2.2.1.1.4
This variable represents the storage type value for the vrIpMcastIgmpGc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastIgmpGcGAddrIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.2.2.1.1.10
This variable represents an index for the vrIpMcastIgmpGc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpMcastIgmpGcDomainIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.2.2.1.1.11
This variable represents an index for the vrIpMcastIgmpGc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..3  

vrIpMcastIgmpGcProtocolportStringIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.2.2.1.1.12
This variable represents an index for the vrIpMcastIgmpGc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..20)  

vrIpMcastIgmpGcOperTable 1.3.6.1.4.1.562.2.4.1.100.6.26.2.2.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of the CacheEntry component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastIgmpGcOperEntry

vrIpMcastIgmpGcOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.2.2.11.1
An entry in the vrIpMcastIgmpGcOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastIgmpGcOperEntry  

vrIpMcastIgmpGcUpTime 1.3.6.1.4.1.562.2.4.1.100.6.26.2.2.11.1.1
This attribute indicates the time elapsed since this entry was created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  EnterpriseDateAndTime Size(0|19)  

vrIpMcastIgmpGcExpiryTime 1.3.6.1.4.1.562.2.4.1.100.6.26.2.2.11.1.2
This attribute indicates the minimum amount of time reamining before this entry will be aged out.
Status: mandatory Access: read-only
OBJECT-TYPE    
  EnterpriseDateAndTime Size(0|8)  

vrIpMcastIgmpGcLastReporter 1.3.6.1.4.1.562.2.4.1.100.6.26.2.2.11.1.3
This attribute indicates the IP address of the source of the last membership report received for this IP Multicast group address on this interface. If no membership report has been received, this attribute has the value 0.0.0.0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vrIpMcastIgmpGcVersion1HostTimer 1.3.6.1.4.1.562.2.4.1.100.6.26.2.2.11.1.4
This attribute indicates the time remaining until the local router will assume that there are no longer any IGMPv1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is reset to the group membership timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpMcastStatic 1.3.6.1.4.1.562.2.4.1.100.6.26.3
OBJECT IDENTIFIER    

vrIpMcastStaticRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.3.1
This entry controls the addition and deletion of vrIpMcastStatic components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastStaticRowStatusEntry

vrIpMcastStaticRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.3.1.1
A single entry in the table represents a single vrIpMcastStatic component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastStaticRowStatusEntry  

vrIpMcastStaticRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.3.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastStatic components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpMcastStaticComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastStaticStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.3.1.1.4
This variable represents the storage type value for the vrIpMcastStatic tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastStaticIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.3.1.1.10
This variable represents the index for the vrIpMcastStatic tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpMcastStaticStateTable 1.3.6.1.4.1.562.2.4.1.100.6.26.3.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastStaticStateEntry

vrIpMcastStaticStateEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.3.10.1
An entry in the vrIpMcastStaticStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastStaticStateEntry  

vrIpMcastStaticAdminState 1.3.6.1.4.1.562.2.4.1.100.6.26.3.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrIpMcastStaticOperationalState 1.3.6.1.4.1.562.2.4.1.100.6.26.3.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpMcastStaticUsageState 1.3.6.1.4.1.562.2.4.1.100.6.26.3.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrIpMcastStaticRoute 1.3.6.1.4.1.562.2.4.1.100.6.26.3.2
OBJECT IDENTIFIER    

vrIpMcastStaticRouteRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.3.2.1
This entry controls the addition and deletion of vrIpMcastStaticRoute components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastStaticRouteRowStatusEntry

vrIpMcastStaticRouteRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.3.2.1.1
A single entry in the table represents a single vrIpMcastStaticRoute component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastStaticRouteRowStatusEntry  

vrIpMcastStaticRouteRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.3.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastStaticRoute components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpMcastStaticRouteComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastStaticRouteStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.3.2.1.1.4
This variable represents the storage type value for the vrIpMcastStaticRoute tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastStaticRouteGAddrIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.3.2.1.1.10
This variable represents an index for the vrIpMcastStaticRoute tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpMcastStaticRouteDomainIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.3.2.1.1.11
This variable represents an index for the vrIpMcastStaticRoute tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..3  

vrIpMcastStaticRouteOifsTable 1.3.6.1.4.1.562.2.4.1.100.6.26.3.2.705
This attribute specifies a list of links to logicalInterfaces representing the outgoing interfaces for this multicast static route entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastStaticRouteOifsEntry

vrIpMcastStaticRouteOifsEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.3.2.705.1
An entry in the vrIpMcastStaticRouteOifsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastStaticRouteOifsEntry  

vrIpMcastStaticRouteOifsValue 1.3.6.1.4.1.562.2.4.1.100.6.26.3.2.705.1.1
This variable represents both the value and the index for the vrIpMcastStaticRouteOifsTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

vrIpMcastStaticRouteOifsRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.3.2.705.1.2
This variable is used to control the addition and deletion of individual values of the vrIpMcastStaticRouteOifsTable.
Status: mandatory Access: write-only
OBJECT-TYPE    
  RowStatus  

vrIpMcastPg 1.3.6.1.4.1.562.2.4.1.100.6.26.4
OBJECT IDENTIFIER    

vrIpMcastPgRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.4.1
This entry controls the addition and deletion of vrIpMcastPg components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPgRowStatusEntry

vrIpMcastPgRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.4.1.1
A single entry in the table represents a single vrIpMcastPg component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPgRowStatusEntry  

vrIpMcastPgRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.4.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastPg components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpMcastPgComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastPgStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.4.1.1.4
This variable represents the storage type value for the vrIpMcastPg tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastPgIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.4.1.1.10
This variable represents the index for the vrIpMcastPg tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..20)  

vrIpMcastPgProvTable 1.3.6.1.4.1.562.2.4.1.100.6.26.4.10
This group contains the provisionable attributes for the PolicyGroup component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPgProvEntry

vrIpMcastPgProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.4.10.1
An entry in the vrIpMcastPgProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPgProvEntry  

vrIpMcastPgAction 1.3.6.1.4.1.562.2.4.1.100.6.26.4.10.1.1
This attribute specifies the action to be taken if a join request is received for any of the multicast group addresses configured as part of this policy. The default action is to deny the join request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER deny(1), allow(2)  

vrIpMcastPgLinkToPolicyUserTable 1.3.6.1.4.1.562.2.4.1.100.6.26.4.704
This attribute specifies a list of IpPorts on which this policy group is applied.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPgLinkToPolicyUserEntry

vrIpMcastPgLinkToPolicyUserEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.4.704.1
An entry in the vrIpMcastPgLinkToPolicyUserTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPgLinkToPolicyUserEntry  

vrIpMcastPgLinkToPolicyUserValue 1.3.6.1.4.1.562.2.4.1.100.6.26.4.704.1.1
This variable represents both the value and the index for the vrIpMcastPgLinkToPolicyUserTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

vrIpMcastPgLinkToPolicyUserRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.4.704.1.2
This variable is used to control the addition and deletion of individual values of the vrIpMcastPgLinkToPolicyUserTable.
Status: mandatory Access: write-only
OBJECT-TYPE    
  RowStatus  

vrIpMcastPgGrp 1.3.6.1.4.1.562.2.4.1.100.6.26.4.2
OBJECT IDENTIFIER    

vrIpMcastPgGrpRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.4.2.1
This entry controls the addition and deletion of vrIpMcastPgGrp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPgGrpRowStatusEntry

vrIpMcastPgGrpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.4.2.1.1
A single entry in the table represents a single vrIpMcastPgGrp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPgGrpRowStatusEntry  

vrIpMcastPgGrpRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.4.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastPgGrp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpMcastPgGrpComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastPgGrpStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.4.2.1.1.4
This variable represents the storage type value for the vrIpMcastPgGrp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastPgGrpGAddrIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.4.2.1.1.10
This variable represents an index for the vrIpMcastPgGrp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpMcastPgGrpGMaskIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.4.2.1.1.11
This variable represents an index for the vrIpMcastPgGrp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpMcastDomain 1.3.6.1.4.1.562.2.4.1.100.6.26.5
OBJECT IDENTIFIER    

vrIpMcastDomainRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.5.1
This entry controls the addition and deletion of vrIpMcastDomain components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastDomainRowStatusEntry

vrIpMcastDomainRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.5.1.1
A single entry in the table represents a single vrIpMcastDomain component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastDomainRowStatusEntry  

vrIpMcastDomainRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.5.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastDomain components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpMcastDomainComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastDomainStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.5.1.1.4
This variable represents the storage type value for the vrIpMcastDomain tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastDomainIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.5.1.1.10
This variable represents the index for the vrIpMcastDomain tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..3  

vrIpMcastDomainOperTable 1.3.6.1.4.1.562.2.4.1.100.6.26.5.11
This group contains the operational attributes for the Domain component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastDomainOperEntry

vrIpMcastDomainOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.5.11.1
An entry in the vrIpMcastDomainOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastDomainOperEntry  

vrIpMcastDomainProtocolActive 1.3.6.1.4.1.562.2.4.1.100.6.26.5.11.1.1
This attribute indicates the multicast protocol active in this domain.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), pimSm(1), pimDm(2), local(3), dvmrp(4)  

vrIpMcastFwd 1.3.6.1.4.1.562.2.4.1.100.6.26.6
OBJECT IDENTIFIER    

vrIpMcastFwdRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.6.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpMcastFwd components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastFwdRowStatusEntry

vrIpMcastFwdRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.6.1.1
A single entry in the table represents a single vrIpMcastFwd component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastFwdRowStatusEntry  

vrIpMcastFwdRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.6.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastFwd components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpMcastFwdComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastFwdStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.6.1.1.4
This variable represents the storage type value for the vrIpMcastFwd tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastFwdGAddrIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.6.1.1.10
This variable represents an index for the vrIpMcastFwd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpMcastFwdDomainIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.6.1.1.11
This variable represents an index for the vrIpMcastFwd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..3  

vrIpMcastFwdSrcAddrIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.6.1.1.12
This variable represents an index for the vrIpMcastFwd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpMcastFwdSrcMaskIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.6.1.1.13
This variable represents an index for the vrIpMcastFwd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpMcastFwdOperTable 1.3.6.1.4.1.562.2.4.1.100.6.26.6.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes associated with a multicast forwarding entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastFwdOperEntry

vrIpMcastFwdOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.6.10.1
An entry in the vrIpMcastFwdOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastFwdOperEntry  

vrIpMcastFwdAge 1.3.6.1.4.1.562.2.4.1.100.6.26.6.10.1.2
This attribute indicates the number of seconds since this route was last updated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpMcastFwdInProtocolPortName 1.3.6.1.4.1.562.2.4.1.100.6.26.6.10.1.3
This attribute indicates the name of the (incoming) protocol port from which the route was learned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

vrIpMcastFwdProtocol 1.3.6.1.4.1.562.2.4.1.100.6.26.6.10.1.4
This attribute indicates the multicast routing protocol via which this multicast forwarding entry was learned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), local(2), netmgmt(3), dvmrp(4), mospf(5), pimSparseDense(6), cbt(7), pimSparse(8), pimDense(9), igmponly(10)  

vrIpMcastFwdReversePathForwardingNeighbor 1.3.6.1.4.1.562.2.4.1.100.6.26.6.10.1.5
This attribute indicates the address of the upstream neighbor (RPF neighbor) from which IP datagrams from these sources to this multicast address are received, or 0.0.0.0 if the upstream is unknown (e.g., in CBT).
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vrIpMcastFwdFlags 1.3.6.1.4.1.562.2.4.1.100.6.26.6.10.1.703
This attribute indicates information concerning the forwarding entry. In particular, the flag information indicates wildcard, SPT, RPT, and Reg entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(3..20)  

vrIpMcastFwdOif 1.3.6.1.4.1.562.2.4.1.100.6.26.6.2
OBJECT IDENTIFIER    

vrIpMcastFwdOifRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.6.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpMcastFwdOif components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastFwdOifRowStatusEntry

vrIpMcastFwdOifRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.6.2.1.1
A single entry in the table represents a single vrIpMcastFwdOif component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastFwdOifRowStatusEntry  

vrIpMcastFwdOifRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.6.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastFwdOif components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpMcastFwdOifComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.6.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastFwdOifStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.6.2.1.1.4
This variable represents the storage type value for the vrIpMcastFwdOif tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastFwdOifOutIfAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.6.2.1.1.10
This variable represents an index for the vrIpMcastFwdOif tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpMcastFwdOifConnectionIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.6.2.1.1.11
This variable represents an index for the vrIpMcastFwdOif tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

vrIpMcastFwdOifOperTable 1.3.6.1.4.1.562.2.4.1.100.6.26.6.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes for the InwIpOutInterface component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastFwdOifOperEntry

vrIpMcastFwdOifOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.6.2.10.1
An entry in the vrIpMcastFwdOifOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastFwdOifOperEntry  

vrIpMcastFwdOifIfIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.6.2.10.1.2
This attribute indicates the ifIndex value of this outgoing interface entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex 1..65535  

vrIpMcastFwdOifProtocol 1.3.6.1.4.1.562.2.4.1.100.6.26.6.2.10.1.3
This attribute indicates the multicast routing protocol via which this multicast forwarding outinterface entry was learned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), local(2), netmgmt(3), dvmrp(4), mospf(5), pimSparseDense(6), cbt(7), pimSparse(8), pimDense(9), igmponly(10)  

vrIpMcastFwdOifAge 1.3.6.1.4.1.562.2.4.1.100.6.26.6.2.10.1.4
This attribute indicates the number of seconds since this route was last updated
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpMcastFwdOifOutProtocolPortName 1.3.6.1.4.1.562.2.4.1.100.6.26.6.2.10.1.702
This attribute indicates the name of the protocol port by which the next hop of this route should be reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

vrIpMcastCacheStats 1.3.6.1.4.1.562.2.4.1.100.6.26.8
OBJECT IDENTIFIER    

vrIpMcastCacheStatsRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.8.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpMcastCacheStats components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastCacheStatsRowStatusEntry

vrIpMcastCacheStatsRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.8.1.1
A single entry in the table represents a single vrIpMcastCacheStats component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastCacheStatsRowStatusEntry  

vrIpMcastCacheStatsRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.8.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastCacheStats components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpMcastCacheStatsComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastCacheStatsStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.8.1.1.4
This variable represents the storage type value for the vrIpMcastCacheStats tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastCacheStatsIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.8.1.1.10
This variable represents the index for the vrIpMcastCacheStats tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..15  

vrIpMcastCacheStatsStateTable 1.3.6.1.4.1.562.2.4.1.100.6.26.8.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastCacheStatsStateEntry

vrIpMcastCacheStatsStateEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.8.10.1
An entry in the vrIpMcastCacheStatsStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastCacheStatsStateEntry  

vrIpMcastCacheStatsAdminState 1.3.6.1.4.1.562.2.4.1.100.6.26.8.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrIpMcastCacheStatsOperationalState 1.3.6.1.4.1.562.2.4.1.100.6.26.8.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpMcastCacheStatsUsageState 1.3.6.1.4.1.562.2.4.1.100.6.26.8.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrIpMcastCacheStatsOperTable 1.3.6.1.4.1.562.2.4.1.100.6.26.8.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group houses all the operational attributes of an Ip cache table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastCacheStatsOperEntry

vrIpMcastCacheStatsOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.8.11.1
An entry in the vrIpMcastCacheStatsOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastCacheStatsOperEntry  

vrIpMcastCacheStatsEntriesFree 1.3.6.1.4.1.562.2.4.1.100.6.26.8.11.1.3
This attribute is indicative of the number of free Ip cache table entries. A consistently high value for this attribute indicates that there is a resource surplus of the memory requirements for cache table. This surplus could be utilized elsewhere if needed by adjusting the cacheTableMaxEntries under the Ip component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..8000  

vrIpMcastCacheStatsTotalLookups 1.3.6.1.4.1.562.2.4.1.100.6.26.8.11.1.4
This attribute indicates the total number of local cache lookups. It wraps around to 0 when it reaches the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpMcastCacheStatsLookupMisses 1.3.6.1.4.1.562.2.4.1.100.6.26.8.11.1.5
This attribute indicates the total number of local cache lookup misses. It wraps around to 0 when it reaches the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastCacheStatsCacheTableMaxEntries 1.3.6.1.4.1.562.2.4.1.100.6.26.8.11.1.395
This attribute indicates the current maximum number of entries that can exist in the IP local cache table on each LP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..8000  

vrIpMcastPimSm 1.3.6.1.4.1.562.2.4.1.100.6.26.9
OBJECT IDENTIFIER    

vrIpMcastPimSmRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.9.1
This entry controls the addition and deletion of vrIpMcastPimSm components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimSmRowStatusEntry

vrIpMcastPimSmRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.9.1.1
A single entry in the table represents a single vrIpMcastPimSm component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimSmRowStatusEntry  

vrIpMcastPimSmRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.9.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastPimSm components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpMcastPimSmComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastPimSmStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.9.1.1.4
This variable represents the storage type value for the vrIpMcastPimSm tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastPimSmIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.9.1.1.10
This variable represents the index for the vrIpMcastPimSm tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpMcastPimSmAdminControlTable 1.3.6.1.4.1.562.2.4.1.100.6.26.9.10
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimSmAdminControlEntry

vrIpMcastPimSmAdminControlEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.9.10.1
An entry in the vrIpMcastPimSmAdminControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimSmAdminControlEntry  

vrIpMcastPimSmSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.9.10.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpMcastPimSmStateTable 1.3.6.1.4.1.562.2.4.1.100.6.26.9.13
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimSmStateEntry

vrIpMcastPimSmStateEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.9.13.1
An entry in the vrIpMcastPimSmStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimSmStateEntry  

vrIpMcastPimSmAdminState 1.3.6.1.4.1.562.2.4.1.100.6.26.9.13.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrIpMcastPimSmOperationalState 1.3.6.1.4.1.562.2.4.1.100.6.26.9.13.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpMcastPimSmUsageState 1.3.6.1.4.1.562.2.4.1.100.6.26.9.13.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrIpMcastPimSmOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.9.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimSmOperStatusEntry

vrIpMcastPimSmOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.9.14.1
An entry in the vrIpMcastPimSmOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimSmOperStatusEntry  

vrIpMcastPimSmSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.9.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpMcastPimSmDomain 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2
OBJECT IDENTIFIER    

vrIpMcastPimSmDomainRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.1
This entry controls the addition and deletion of vrIpMcastPimSmDomain components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimSmDomainRowStatusEntry

vrIpMcastPimSmDomainRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.1.1
A single entry in the table represents a single vrIpMcastPimSmDomain component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimSmDomainRowStatusEntry  

vrIpMcastPimSmDomainRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastPimSmDomain components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpMcastPimSmDomainComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastPimSmDomainStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.1.1.4
This variable represents the storage type value for the vrIpMcastPimSmDomain tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastPimSmDomainIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.1.1.10
This variable represents the index for the vrIpMcastPimSmDomain tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..3  

vrIpMcastPimSmDomainProvTable 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.10
This group contains the provisionable attributes of the Domain component under the PimSm component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimSmDomainProvEntry

vrIpMcastPimSmDomainProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.10.1
An entry in the vrIpMcastPimSmDomainProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimSmDomainProvEntry  

vrIpMcastPimSmDomainJoinPruneInterval 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.10.1.1
This attribute specifies the frequency at which PIM Join/Prune messages are transmitted on this PIM interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 5..4292967295  

vrIpMcastPimSmDomainSptJoinThreshold 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.10.1.2
The attribute specifies the threshold at which the last-hop router joins the shortest-path tree. If 0 is selected then the router immediately joins the shortest path tree upon receipt of the first data packet. If infinity is selected then the router never joins the shortest path tree. VALUES ( 1 = infinity )
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1  

vrIpMcastPimSmDomainOperTable 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.11
This group contains the operational attributes of the Domain component under the PimSm component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimSmDomainOperEntry

vrIpMcastPimSmDomainOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.11.1
An entry in the vrIpMcastPimSmDomainOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimSmDomainOperEntry  

vrIpMcastPimSmDomainBsrAddress 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.11.1.1
This attribute indicates the IP address of the bootstrap router (BSR) for this PIM domain.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vrIpMcastPimSmDomainBsrExpiryTimer 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.11.1.2
This attribute indicates the minimum time remaining before the bootstrap router in this domain will be declared down.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

vrIpMcastPimSmDomainStatsTable 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12
This group contains the statistics attributes of the Domain component under the PimSm component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimSmDomainStatsEntry

vrIpMcastPimSmDomainStatsEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1
An entry in the vrIpMcastPimSmDomainStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimSmDomainStatsEntry  

vrIpMcastPimSmDomainTxBsrMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.1
This attribute counts the Bootstrap Message transmitted by the bootstrap router (BSR) for this pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainRxBsrMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.2
This attribute counts the Bootstrap Message received by this pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainTxCRpAdvMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.3
This attribute counts the Candidate-RP advertisement Message transmitted by the configured CRp for this pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainRxCRpAdvMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.4
This attribute counts the Candidate-RP advertisement Message received by the bootstrap router (BSR) for this pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainTxHelloMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.5
This attribute counts the Hello Message transmitted from PimIf belonging to this pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainRxHelloMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.6
This attribute counts the Hello Message received from pimif belonging to this pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainTxRegisterMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.7
This attribute counts the Register Message transmitted by the Designated Router (DR) for this pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainRxRegisterMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.8
This attribute counts the Register Message received by the RP for this pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainTxRegisterStopMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.9
This attribute counts the RegisterStop Message transmitted by the RP for this pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainRxRegisterStopMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.10
This attribute counts the RegisterStop Message received by the Designated router (DR) for this pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainTxAssertMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.11
This attribute counts the assert Message transmitted from this pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainRxAssertMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.12
This attribute counts the Assert Message received by this pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainTxJPMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.13
This attribute counts the JP Message transmitted for this pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainRxJPMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.14
This attribute counts the JP Message received by this pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainDiscardBsrMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.17
This attribute counts the Bootstrap Message discarded by this pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainDiscardCRpAdvMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.18
This attribute counts the Candidate-RP advertisement Message discarded by the bootstrap router (BSR) for this pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainDiscardHelloMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.19
This attribute counts the Hello Message discarded if it is not destined for us. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainDiscardRegisterMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.20
This attribute counts the Register Message discarded if we are not RP for this Pim domain. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainDiscardRegisterStopMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.21
This attribute counts the RegisterStop Message discarded. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainDiscardAssertMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.22
This attribute counts the Assert Message discarded if we are not expecting it. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainDiscardJPMsg 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.12.1.23
This attribute counts the JP Message discarded by this pim domain if it is not destined for us. This counter wraps to zero when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpMcastPimSmDomainCRp 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2
OBJECT IDENTIFIER    

vrIpMcastPimSmDomainCRpRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.1
This entry controls the addition and deletion of vrIpMcastPimSmDomainCRp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimSmDomainCRpRowStatusEntry

vrIpMcastPimSmDomainCRpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.1.1
A single entry in the table represents a single vrIpMcastPimSmDomainCRp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimSmDomainCRpRowStatusEntry  

vrIpMcastPimSmDomainCRpRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastPimSmDomainCRp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpMcastPimSmDomainCRpComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastPimSmDomainCRpStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.1.1.4
This variable represents the storage type value for the vrIpMcastPimSmDomainCRp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastPimSmDomainCRpIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.1.1.10
This variable represents the index for the vrIpMcastPimSmDomainCRp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpMcastPimSmDomainCRpProvTable 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.10
This group specifies all the attributes for component CandidateRendezvousPoint.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimSmDomainCRpProvEntry

vrIpMcastPimSmDomainCRpProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.10.1
An entry in the vrIpMcastPimSmDomainCRpProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimSmDomainCRpProvEntry  

vrIpMcastPimSmDomainCRpCandidateRpAddress 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.10.1.1
This attribute specifies a link to a logical interface component which specifies an IP address to be used as the local identifier in CRP advertisement messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

vrIpMcastPimSmDomainCRpCandidateRpPreference 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.10.1.2
This attribute specifies the preference value to be used in CRP advertisement messages. Lower values indicate higher preference.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

vrIpMcastPimSmDomainCRpGrp 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.2
OBJECT IDENTIFIER    

vrIpMcastPimSmDomainCRpGrpRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.2.1
This entry controls the addition and deletion of vrIpMcastPimSmDomainCRpGrp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimSmDomainCRpGrpRowStatusEntry

vrIpMcastPimSmDomainCRpGrpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.2.1.1
A single entry in the table represents a single vrIpMcastPimSmDomainCRpGrp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimSmDomainCRpGrpRowStatusEntry  

vrIpMcastPimSmDomainCRpGrpRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastPimSmDomainCRpGrp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpMcastPimSmDomainCRpGrpComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastPimSmDomainCRpGrpStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.2.1.1.4
This variable represents the storage type value for the vrIpMcastPimSmDomainCRpGrp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastPimSmDomainCRpGrpGrpAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.2.1.1.10
This variable represents an index for the vrIpMcastPimSmDomainCRpGrp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpMcastPimSmDomainCRpGrpGrpMaskIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.2.2.1.1.11
This variable represents an index for the vrIpMcastPimSmDomainCRpGrp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpMcastPimSmDomainRpSet 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.3
OBJECT IDENTIFIER    

vrIpMcastPimSmDomainRpSetRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.3.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpMcastPimSmDomainRpSet components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimSmDomainRpSetRowStatusEntry

vrIpMcastPimSmDomainRpSetRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.3.1.1
A single entry in the table represents a single vrIpMcastPimSmDomainRpSet component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimSmDomainRpSetRowStatusEntry  

vrIpMcastPimSmDomainRpSetRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.3.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastPimSmDomainRpSet components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpMcastPimSmDomainRpSetComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastPimSmDomainRpSetStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.3.1.1.4
This variable represents the storage type value for the vrIpMcastPimSmDomainRpSet tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastPimSmDomainRpSetGrpAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.3.1.1.10
This variable represents an index for the vrIpMcastPimSmDomainRpSet tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpMcastPimSmDomainRpSetGrpMaskIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.3.1.1.11
This variable represents an index for the vrIpMcastPimSmDomainRpSet tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpMcastPimSmDomainRpSetRpAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.3.1.1.12
This variable represents an index for the vrIpMcastPimSmDomainRpSet tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpMcastPimSmDomainRpSetOperTable 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.3.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes for a candidate RP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimSmDomainRpSetOperEntry

vrIpMcastPimSmDomainRpSetOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.3.11.1
An entry in the vrIpMcastPimSmDomainRpSetOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimSmDomainRpSetOperEntry  

vrIpMcastPimSmDomainRpSetRpSetHoldTime 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.3.11.1.1
This attribute indicates the holdtime of a Candidate-RP. If the local router is not the BSR, this value is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

vrIpMcastPimSmDomainRpSetRpSetExpiryTime 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.3.11.1.2
This attribute indicates the minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

vrIpMcastPimSmDomainRpSetRpSetPriority 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.3.11.1.3
This attribute indicates the priority advertised by BSR for this CRP. If the local router is the BSR, this value specifies the priority advertised by CRP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

vrIpMcastPimSmDomainCBsr 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.4
OBJECT IDENTIFIER    

vrIpMcastPimSmDomainCBsrRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.4.1
This entry controls the addition and deletion of vrIpMcastPimSmDomainCBsr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimSmDomainCBsrRowStatusEntry

vrIpMcastPimSmDomainCBsrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.4.1.1
A single entry in the table represents a single vrIpMcastPimSmDomainCBsr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimSmDomainCBsrRowStatusEntry  

vrIpMcastPimSmDomainCBsrRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.4.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastPimSmDomainCBsr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpMcastPimSmDomainCBsrComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastPimSmDomainCBsrStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.4.1.1.4
This variable represents the storage type value for the vrIpMcastPimSmDomainCBsr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastPimSmDomainCBsrIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.4.1.1.10
This variable represents the index for the vrIpMcastPimSmDomainCBsr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpMcastPimSmDomainCBsrProvTable 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.4.10
This group contains all the provisionable attributes for component CandidateBootstrapRouter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimSmDomainCBsrProvEntry

vrIpMcastPimSmDomainCBsrProvEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.4.10.1
An entry in the vrIpMcastPimSmDomainCBsrProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimSmDomainCBsrProvEntry  

vrIpMcastPimSmDomainCBsrCandidateBsrAddress 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.4.10.1.1
This attribute specifies a link to a logical interface component which specifies an IP address to use as the local system identifier in bootstrap messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

vrIpMcastPimSmDomainCBsrCandidateBsrPreference 1.3.6.1.4.1.562.2.4.1.100.6.26.9.2.4.10.1.2
This attribute specifies the preference value used in bootstrap messages. Higher values indicate higher priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

vrIpMcastPimNbr 1.3.6.1.4.1.562.2.4.1.100.6.26.10
OBJECT IDENTIFIER    

vrIpMcastPimNbrRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.6.26.10.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpMcastPimNbr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimNbrRowStatusEntry

vrIpMcastPimNbrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.10.1.1
A single entry in the table represents a single vrIpMcastPimNbr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimNbrRowStatusEntry  

vrIpMcastPimNbrRowStatus 1.3.6.1.4.1.562.2.4.1.100.6.26.10.1.1.1
This variable is used as the basis for SNMP naming of vrIpMcastPimNbr components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpMcastPimNbrComponentName 1.3.6.1.4.1.562.2.4.1.100.6.26.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpMcastPimNbrStorageType 1.3.6.1.4.1.562.2.4.1.100.6.26.10.1.1.4
This variable represents the storage type value for the vrIpMcastPimNbr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpMcastPimNbrNbrAddressIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.10.1.1.10
This variable represents an index for the vrIpMcastPimNbr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vrIpMcastPimNbrDomainIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.10.1.1.11
This variable represents an index for the vrIpMcastPimNbr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..3  

vrIpMcastPimNbrOperTable 1.3.6.1.4.1.562.2.4.1.100.6.26.10.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of the PimNeighborEntry componnent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpMcastPimNbrOperEntry

vrIpMcastPimNbrOperEntry 1.3.6.1.4.1.562.2.4.1.100.6.26.10.10.1
An entry in the vrIpMcastPimNbrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpMcastPimNbrOperEntry  

vrIpMcastPimNbrIfIndex 1.3.6.1.4.1.562.2.4.1.100.6.26.10.10.1.1
This attribute indicates the value of ifIndex for the interface used to reach this PIM neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex 1..65535  

vrIpMcastPimNbrUpTime 1.3.6.1.4.1.562.2.4.1.100.6.26.10.10.1.2
This attribute indicates the time since this PIM neighbor became a neighbor of this local router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

vrIpMcastPimNbrExpiryTimer 1.3.6.1.4.1.562.2.4.1.100.6.26.10.10.1.3
This attribute indicates the minimum time remaining before this PIM neighbor will be aged out.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

ipGroup 1.3.6.1.4.1.562.2.4.2.27.1
OBJECT IDENTIFIER    

ipGroupBE 1.3.6.1.4.1.562.2.4.2.27.1.5
OBJECT IDENTIFIER    

ipGroupBE01 1.3.6.1.4.1.562.2.4.2.27.1.5.2
OBJECT IDENTIFIER    

ipGroupBE01A 1.3.6.1.4.1.562.2.4.2.27.1.5.2.2
OBJECT IDENTIFIER    

ipCapabilities 1.3.6.1.4.1.562.2.4.2.27.3
OBJECT IDENTIFIER    

ipCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.27.3.5
OBJECT IDENTIFIER    

ipCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.27.3.5.2
OBJECT IDENTIFIER    

ipCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.27.3.5.2.2
OBJECT IDENTIFIER