Nortel-Magellan-Passport-DcmeMIB

File: Nortel-Magellan-Passport-DcmeMIB.mib (172078 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE components passportMIBs
Counter32 RowPointer DisplayString
StorageType RowStatus PassportCounter64
Gauge32 Integer32 Unsigned32
AsciiString Hex NonReplicated
EnterpriseDateAndTime FixedPoint1 Link
DigitString

Defined Types

DcmeRowStatusEntry  
SEQUENCE    
  dcmeRowStatus RowStatus
  dcmeComponentName DisplayString
  dcmeStorageType StorageType
  dcmeIndex Integer32

DcmeProvEntry  
SEQUENCE    
  dcmeCommentText AsciiString
  dcmePreestablishedConnections Unsigned32
  dcmeTrmThreshold Unsigned32
  dcmeTrmSignalChangeInterval Unsigned32
  dcmeSpeechAlarmThreshold Unsigned32
  dcmeAudio3kHzAlarmThreshold Unsigned32
  dcmeUnrestricted64kAlarmThreshold Unsigned32
  dcmeAlarmTimeInterval Unsigned32
  dcmeMaxUnrestricted64kCalls Unsigned32

DcmeStateEntry  
SEQUENCE    
  dcmeAdminState INTEGER
  dcmeOperationalState INTEGER
  dcmeUsageState INTEGER

DcmeStatsEntry  
SEQUENCE    
  dcmeTrm64kNotAvailable Counter32
  dcmeTrmSpeechNotAvailable Counter32

DcmeDLinksEntry  
SEQUENCE    
  dcmeDLinksValue Link
  dcmeDLinksRowStatus RowStatus

DcmeActiveDcmeLinksEntry  
SEQUENCE    
  dcmeActiveDcmeLinksValue RowPointer

DcmeProfileRowStatusEntry  
SEQUENCE    
  dcmeProfileRowStatus RowStatus
  dcmeProfileComponentName DisplayString
  dcmeProfileStorageType StorageType
  dcmeProfileIndex NonReplicated

DcmeProfileLCOpsEntry  
SEQUENCE    
  dcmeProfileSetupPriority Unsigned32
  dcmeProfileHoldingPriority Unsigned32
  dcmeProfileBumpPreference INTEGER
  dcmeProfileRequiredTrafficType INTEGER
  dcmeProfilePermittedTrunkTypes OCTET STRING
  dcmeProfileRequiredSecurity Unsigned32
  dcmeProfileRequiredCustomerParm Unsigned32
  dcmeProfilePathAttributeToMinimize INTEGER
  dcmeProfileMaximumAcceptableCost Unsigned32
  dcmeProfileMaximumAcceptableDelay Unsigned32
  dcmeProfileEmissionPriority Unsigned32
  dcmeProfileDiscardPriority Unsigned32
  dcmeProfilePathFailureAction INTEGER
  dcmeProfileOptimization INTEGER

DcmeProfileFrOpsEntry  
SEQUENCE    
  dcmeProfileVoiceEncoding INTEGER
  dcmeProfileMaxVoiceBitRate INTEGER
  dcmeProfileMinVoiceBitRate INTEGER
  dcmeProfileVoiceTrafficOptimization INTEGER
  dcmeProfileSilenceSuppression INTEGER
  dcmeProfileSilenceSuppressionFactor Unsigned32
  dcmeProfileEchoCancellation INTEGER
  dcmeProfileModemFaxEncoding INTEGER
  dcmeProfileMaxModemFaxG711G726Rate INTEGER
  dcmeProfileMinModemFaxG711G726Rate INTEGER
  dcmeProfileFaxIdleSuppressionG711G726 INTEGER
  dcmeProfileInsertedOutputDelay INTEGER
  dcmeProfileIngressAudioGain INTEGER
  dcmeProfileEgressAudioGain INTEGER
  dcmeProfileSpeechHangoverTime Unsigned32
  dcmeProfileComfortNoiseCap INTEGER
  dcmeProfileModemFaxSpeechDiscrim INTEGER
  dcmeProfileV17EncodedAsG711G726 INTEGER
  dcmeProfileDtmfRegeneration INTEGER
  dcmeProfileMaxFaxRelayRate FixedPoint1

DclRowStatusEntry  
SEQUENCE    
  dclRowStatus RowStatus
  dclComponentName DisplayString
  dclStorageType StorageType
  dclIndex Integer32

DclProvEntry  
SEQUENCE    
  dclCommentText AsciiString
  dclRemoteNpi INTEGER
  dclRemoteDna DigitString
  dclDcme Link
  dclIdlePattern Hex
  dclAlternateIdlePattern Hex

DclStateEntry  
SEQUENCE    
  dclAdminState INTEGER
  dclOperationalState INTEGER
  dclUsageState INTEGER

DclOperEntry  
SEQUENCE    
  dclActiveSpeechCalls Gauge32
  dclActive3kHzCalls Gauge32
  dclActive64kCalls Gauge32
  dclReceivedTrmSignal INTEGER
  dclTransmittedTrmSignal INTEGER

DclStatsEntry  
SEQUENCE    
  dclTotalSpeechCalls Counter32
  dclTotal3kHzCalls Counter32
  dclTotal64kCalls Counter32
  dclRejectedSpeechCalls Counter32
  dclRejected3kHzCalls Counter32
  dclRejected64kCalls Counter32
  dclInvalidTrmSignals Counter32

DclDnaRowStatusEntry  
SEQUENCE    
  dclDnaRowStatus RowStatus
  dclDnaComponentName DisplayString
  dclDnaStorageType StorageType
  dclDnaIndex NonReplicated

DclDnaAddressEntry  
SEQUENCE    
  dclDnaNumberingPlanIndicator INTEGER
  dclDnaDataNetworkAddress DigitString

DclFramerRowStatusEntry  
SEQUENCE    
  dclFramerRowStatus RowStatus
  dclFramerComponentName DisplayString
  dclFramerStorageType StorageType
  dclFramerIndex NonReplicated

DclFramerProvEntry  
SEQUENCE    
  dclFramerInterfaceName Link

DclFramerStateEntry  
SEQUENCE    
  dclFramerAdminState INTEGER
  dclFramerOperationalState INTEGER
  dclFramerUsageState INTEGER

DclVsRowStatusEntry  
SEQUENCE    
  dclVsRowStatus RowStatus
  dclVsComponentName DisplayString
  dclVsStorageType StorageType
  dclVsIndex Integer32

DclVsProvEntry  
SEQUENCE    
  dclVsVsType INTEGER

DclVsOperEntry  
SEQUENCE    
  dclVsStatus INTEGER
  dclVsCallType INTEGER
  dclVsReceivedAbBits INTEGER
  dclVsTransmittedAbBits INTEGER

DclVsStatsEntry  
SEQUENCE    
  dclVsTotalCalls Counter32
  dclVsTotalCallSeconds Counter32
  dclVsInvalidAbBits Counter32

DclVsStateEntry  
SEQUENCE    
  dclVsAdminState INTEGER
  dclVsOperationalState INTEGER
  dclVsUsageState INTEGER

DclVsFramerRowStatusEntry  
SEQUENCE    
  dclVsFramerRowStatus RowStatus
  dclVsFramerComponentName DisplayString
  dclVsFramerStorageType StorageType
  dclVsFramerIndex NonReplicated

DclVsFramerProvEntry  
SEQUENCE    
  dclVsFramerInterfaceName Link

DclVsFramerStateEntry  
SEQUENCE    
  dclVsFramerAdminState INTEGER
  dclVsFramerOperationalState INTEGER
  dclVsFramerUsageState INTEGER

DclVsFramerStatsEntry  
SEQUENCE    
  dclVsFramerTotalCells Unsigned32
  dclVsFramerAudioCells Unsigned32
  dclVsFramerSilenceCells Unsigned32
  dclVsFramerModemCells Unsigned32
  dclVsFramerCurrentEncodingRate INTEGER
  dclVsFramerLrcErrors Unsigned32
  dclVsFramerFrmLostInNetwork Unsigned32
  dclVsFramerFrmUnderRuns Unsigned32
  dclVsFramerFrmDumped Unsigned32
  dclVsFramerModemSilenceCells Counter32
  dclVsFramerCurrentEncoding INTEGER
  dclVsFramerTptStatus INTEGER
  dclVsFramerFaxRelayCells Counter32
  dclVsFramerModemFaxCells Unsigned32
  dclVsFramerFaxIdleCells Counter32

DclVsFramerOperEntry  
SEQUENCE    
  dclVsFramerOpCurrentEncoding INTEGER
  dclVsFramerCurrentRate INTEGER
  dclVsFramerOpTptStatus INTEGER

DclVsFramerNegEntry  
SEQUENCE    
  dclVsFramerNegotiatedSilenceSuppression INTEGER
  dclVsFramerNegotiatedFisG711G726 INTEGER
  dclVsFramerNegotiatedDtmfRegeneration INTEGER
  dclVsFramerNegotiatedV17AsG711G726 INTEGER
  dclVsFramerNegotiatedTandemPassThrough INTEGER

DclVsFramerFrmToNetworkEntry  
SEQUENCE    
  dclVsFramerFrmToNetworkIndex INTEGER
  dclVsFramerFrmToNetworkValue Unsigned32

DclVsFramerFrmFromNetworkEntry  
SEQUENCE    
  dclVsFramerFrmFromNetworkIndex INTEGER
  dclVsFramerFrmFromNetworkValue Unsigned32

DclVsFramerNEncodingEntry  
SEQUENCE    
  dclVsFramerNEncodingIndex INTEGER
  dclVsFramerNEncodingValue INTEGER

DclVsFramerNRatesEntry  
SEQUENCE    
  dclVsFramerNRatesTrafficIndex INTEGER
  dclVsFramerNRatesRateIndex INTEGER
  dclVsFramerNRatesValue INTEGER

DclVsFramerVfpDebugRowStatusEntry  
SEQUENCE    
  dclVsFramerVfpDebugRowStatus RowStatus
  dclVsFramerVfpDebugComponentName DisplayString
  dclVsFramerVfpDebugStorageType StorageType
  dclVsFramerVfpDebugIndex NonReplicated

DclVsFramerMvpDebugRowStatusEntry  
SEQUENCE    
  dclVsFramerMvpDebugRowStatus RowStatus
  dclVsFramerMvpDebugComponentName DisplayString
  dclVsFramerMvpDebugStorageType StorageType
  dclVsFramerMvpDebugIndex NonReplicated

DclVsFramerPcmCaptureRowStatusEntry  
SEQUENCE    
  dclVsFramerPcmCaptureRowStatus RowStatus
  dclVsFramerPcmCaptureComponentName DisplayString
  dclVsFramerPcmCaptureStorageType StorageType
  dclVsFramerPcmCaptureIndex NonReplicated

DclVsLCoRowStatusEntry  
SEQUENCE    
  dclVsLCoRowStatus RowStatus
  dclVsLCoComponentName DisplayString
  dclVsLCoStorageType StorageType
  dclVsLCoIndex NonReplicated

DclVsLCoPathDataEntry  
SEQUENCE    
  dclVsLCoState INTEGER
  dclVsLCoOverrideRemoteName AsciiString
  dclVsLCoEnd INTEGER
  dclVsLCoCostMetric Unsigned32
  dclVsLCoDelayMetric Unsigned32
  dclVsLCoRoundTripDelay Unsigned32
  dclVsLCoSetupPriority Unsigned32
  dclVsLCoHoldingPriority Unsigned32
  dclVsLCoRequiredTxBandwidth Gauge32
  dclVsLCoRequiredRxBandwidth Gauge32
  dclVsLCoRequiredTrafficType INTEGER
  dclVsLCoPermittedTrunkTypes OCTET STRING
  dclVsLCoRequiredSecurity Unsigned32
  dclVsLCoRequiredCustomerParameter Unsigned32
  dclVsLCoEmissionPriority Unsigned32
  dclVsLCoDiscardPriority Unsigned32
  dclVsLCoPathType INTEGER
  dclVsLCoRetryCount Unsigned32
  dclVsLCoPathFailureCount Unsigned32
  dclVsLCoReasonForNoRoute INTEGER
  dclVsLCoLastTearDownReason INTEGER
  dclVsLCoPathFailureAction INTEGER
  dclVsLCoBumpPreference INTEGER
  dclVsLCoOptimization INTEGER
  dclVsLCoPathUpDateTime EnterpriseDateAndTime

DclVsLCoStatsEntry  
SEQUENCE    
  dclVsLCoPktsToNetwork PassportCounter64
  dclVsLCoBytesToNetwork PassportCounter64
  dclVsLCoPktsFromNetwork PassportCounter64
  dclVsLCoBytesFromNetwork PassportCounter64

DclVsLCoPathEntry  
SEQUENCE    
  dclVsLCoPathValue AsciiString

Defined Values

dcmeMIB 1.3.6.1.4.1.562.2.4.2.134
OBJECT IDENTIFIER    

dcme 1.3.6.1.4.1.562.2.4.1.129
OBJECT IDENTIFIER    

dcmeRowStatusTable 1.3.6.1.4.1.562.2.4.1.129.1
This entry controls the addition and deletion of dcme components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DcmeRowStatusEntry

dcmeRowStatusEntry 1.3.6.1.4.1.562.2.4.1.129.1.1
A single entry in the table represents a single dcme component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DcmeRowStatusEntry  

dcmeRowStatus 1.3.6.1.4.1.562.2.4.1.129.1.1.1
This variable is used as the basis for SNMP naming of dcme components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

dcmeComponentName 1.3.6.1.4.1.562.2.4.1.129.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dcmeStorageType 1.3.6.1.4.1.562.2.4.1.129.1.1.4
This variable represents the storage type value for the dcme tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

dcmeIndex 1.3.6.1.4.1.562.2.4.1.129.1.1.10
This variable represents the index for the dcme tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..16  

dcmeProvTable 1.3.6.1.4.1.562.2.4.1.129.10
This group contains the provisionable attributes of a Dcme component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DcmeProvEntry

dcmeProvEntry 1.3.6.1.4.1.562.2.4.1.129.10.1
An entry in the dcmeProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DcmeProvEntry  

dcmeCommentText 1.3.6.1.4.1.562.2.4.1.129.10.1.1
Use of this attribute is at the discretion of the system administrator. Typically, it specifies the name of the customer that is using this Dcme.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..40)  

dcmePreestablishedConnections 1.3.6.1.4.1.562.2.4.1.129.10.1.2
This attribute specifies the number of Logical Connections (LC) preestablished between each DcmeLink associated with this Dcme and its remote peer, that are established beyond those that are required to carry established connections. Those are the standby LCs to be used for the subsequent user speech or audio 3.1 kHz calls. This attribute should be set to the number of speech and audio 3.1 kHz calls expected in a typical burst of calls received from the ISC on one DcmeLink.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..30  

dcmeTrmThreshold 1.3.6.1.4.1.562.2.4.1.129.10.1.3
This attribute is used to determine when the DcmeLink may be unable to handle incoming calls from the ISC. If the Dcme fails to replenish the number of preestablished connections the 'No trunk(s) available for 3.1 kHz audio or speech' TRM signal is sent to the ISC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..30  

dcmeTrmSignalChangeInterval 1.3.6.1.4.1.562.2.4.1.129.10.1.4
This attribute specifies a minimum time interval between TRM signal change from 'No trunk(s) available for 3.1 kHz audio or speech' or 'No 64 kbit/s capacity available' to 'DCME normal' signal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 10..300  

dcmeSpeechAlarmThreshold 1.3.6.1.4.1.562.2.4.1.129.10.1.5
This attribute specifies how many normal speech calls can be rejected by one dcmeLink within the alarmTimeInterval time before a SET alarm is generated. This alarm is cleared when the number of rejected speech calls is less than speechAlarmThreshold in a subsequent interval. If the value is 0 the rejected speech calls are not monitored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1000  

dcmeAudio3kHzAlarmThreshold 1.3.6.1.4.1.562.2.4.1.129.10.1.6
This attribute specifies how many audio 3.1 kHz calls can be rejected by one dcmeLink within the alarmTimeInterval time before a SET alarm is generated. This alarm is cleared when the number of rejected audio 3.1 kHz calls is less than audio3kHzAlarmThreshold in a subsequent interval. If the value is 0 the rejected audio 3.1 kHz calls are not monitored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1000  

dcmeUnrestricted64kAlarmThreshold 1.3.6.1.4.1.562.2.4.1.129.10.1.7
This attribute specifies how many unrestricted 64 kbit/s calls can be rejected by one dcmeLink within the alarmTimeInterval time before a SET alarm is generated. This alarm is cleared when the number of rejected unrestricted 64 kbit/s calls is less than unrestricted64kAlarmThreshold in a subsequent interval. If the value is 0 the rejected unrestricted 64 kbit/s calls are not monitored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1000  

dcmeAlarmTimeInterval 1.3.6.1.4.1.562.2.4.1.129.10.1.8
This attribute specifies the time interval within which the rejected speech calls, audio 3.1 kHz calls, and unrestricted 64 kbit/s calls are monitored. It is used in the conjunction with the speechAlarmThreshold, audio3kHzAlarmThreshold, and unrestricted64kAlarmThreshold attributes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..120  

dcmeMaxUnrestricted64kCalls 1.3.6.1.4.1.562.2.4.1.129.10.1.9
This attribute specifies the maximum number of simultaneous dynamic unrestricted 64 kbit/s calls that can be established. A value of 0 means that no dynamic unrestricted 64 kbit/s calls can be established.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..420  

dcmeStateTable 1.3.6.1.4.1.562.2.4.1.129.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DcmeStateEntry

dcmeStateEntry 1.3.6.1.4.1.562.2.4.1.129.11.1
An entry in the dcmeStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DcmeStateEntry  

dcmeAdminState 1.3.6.1.4.1.562.2.4.1.129.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

dcmeOperationalState 1.3.6.1.4.1.562.2.4.1.129.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

dcmeUsageState 1.3.6.1.4.1.562.2.4.1.129.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

dcmeStatsTable 1.3.6.1.4.1.562.2.4.1.129.13
This group contains the statistics maintained by this Dcme.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DcmeStatsEntry

dcmeStatsEntry 1.3.6.1.4.1.562.2.4.1.129.13.1
An entry in the dcmeStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DcmeStatsEntry  

dcmeTrm64kNotAvailable 1.3.6.1.4.1.562.2.4.1.129.13.1.1
This attribute counts the total number of times the TRM signal was changed to the 'No 64 kbit/s capacity available' signal. This counter wraps to zero when it exceeds its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

dcmeTrmSpeechNotAvailable 1.3.6.1.4.1.562.2.4.1.129.13.1.2
This attribute counts the total number of times the TRM signal was changed to the 'No trunk(s) available for 3.1 kHz audio or speech' signal. This counter wraps to zero when it exceeds its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

dcmeDLinksTable 1.3.6.1.4.1.562.2.4.1.129.419
This attribute specifies all of the DcmeLinks which are associated with this Dcme. There can be up to 14 DcmeLinks associated with one Dcme.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DcmeDLinksEntry

dcmeDLinksEntry 1.3.6.1.4.1.562.2.4.1.129.419.1
An entry in the dcmeDLinksTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DcmeDLinksEntry  

dcmeDLinksValue 1.3.6.1.4.1.562.2.4.1.129.419.1.1
This variable represents both the value and the index for the dcmeDLinksTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

dcmeDLinksRowStatus 1.3.6.1.4.1.562.2.4.1.129.419.1.2
This variable is used to control the addition and deletion of individual values of the dcmeDLinksTable.
Status: mandatory Access: write-only
OBJECT-TYPE    
  RowStatus  

dcmeActiveDcmeLinksTable 1.3.6.1.4.1.562.2.4.1.129.420
This attribute indicates all of the DcmeLink components that are currently active and have registered with this Dcme.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DcmeActiveDcmeLinksEntry

dcmeActiveDcmeLinksEntry 1.3.6.1.4.1.562.2.4.1.129.420.1
An entry in the dcmeActiveDcmeLinksTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DcmeActiveDcmeLinksEntry  

dcmeActiveDcmeLinksValue 1.3.6.1.4.1.562.2.4.1.129.420.1.1
This variable represents both the value and the index for the dcmeActiveDcmeLinksTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

dcmeProfile 1.3.6.1.4.1.562.2.4.1.129.2
OBJECT IDENTIFIER    

dcmeProfileRowStatusTable 1.3.6.1.4.1.562.2.4.1.129.2.1
This entry controls the addition and deletion of dcmeProfile components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DcmeProfileRowStatusEntry

dcmeProfileRowStatusEntry 1.3.6.1.4.1.562.2.4.1.129.2.1.1
A single entry in the table represents a single dcmeProfile component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DcmeProfileRowStatusEntry  

dcmeProfileRowStatus 1.3.6.1.4.1.562.2.4.1.129.2.1.1.1
This variable is used as the basis for SNMP naming of dcmeProfile components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

dcmeProfileComponentName 1.3.6.1.4.1.562.2.4.1.129.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dcmeProfileStorageType 1.3.6.1.4.1.562.2.4.1.129.2.1.1.4
This variable represents the storage type value for the dcmeProfile tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

dcmeProfileIndex 1.3.6.1.4.1.562.2.4.1.129.2.1.1.10
This variable represents the index for the dcmeProfile tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

dcmeProfileLCOpsTable 1.3.6.1.4.1.562.2.4.1.129.2.10
This group contains attributes used in setting up Switched Logical Connections (SLC) over the network using the Path Oriented Routing System (PORS) between two peer DcmeLink components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DcmeProfileLCOpsEntry

dcmeProfileLCOpsEntry 1.3.6.1.4.1.562.2.4.1.129.2.10.1
An entry in the dcmeProfileLCOpsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DcmeProfileLCOpsEntry  

dcmeProfileSetupPriority 1.3.6.1.4.1.562.2.4.1.129.2.10.1.1
This attribute specifies the priority at which a path is established. Zero is the highest priority and four is the lowest. When PORS establishes a path through the network, it uses the setupPriority attribute to determine its potential for bumping established paths to acquire their bandwidth. The holdingPriority, a complementary attribute of this attribute, indicates the priority a path maintains once it is established. A new path can bump an existing path if the new path's setupPriority is higher (numerically less) than the existing path's holdingPriority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4  

dcmeProfileHoldingPriority 1.3.6.1.4.1.562.2.4.1.129.2.10.1.2
This attribute specifies the priority that a path holds once it is established. Zero is the highest priority and four is the lowest. A path's holdingPriority determines its likelihood of being bumped by a new path to acquire its bandwidth. The setupPriority, a complementary attribute, indicates the priority of a path at establishment time. A new path can bump an existing path if the new path's setupPriority is higher (numerically less) than the existing path's holdingPriority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4  

dcmeProfileBumpPreference 1.3.6.1.4.1.562.2.4.1.129.2.10.1.3
This attribute specifies when bumping occurs in the route selection process. A connection with higher (numerically less) setupPriority may bump a connection with lower (numerically higher) setupPriority in order to acquire its bandwidth and be established. If bumpPreference is bumpWhenNecessary, bumping occurs only when it is necessary. That is, a connection will bump another connection only if there is no other way for the connection to be established. If bumpPreference is bumpToObtainBestRoute, bumping occurs in order to use the best available route it may have.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bumpWhenNecessary(0), bumpToObtainBestRoute(1)  

dcmeProfileRequiredTrafficType 1.3.6.1.4.1.562.2.4.1.129.2.10.1.4
This attribute specifies the type of traffic transmitted over the path. There are eight possible traffic types, and the path can transmit only one of them. The originating end of the connection determines the type. The voice, data and video traffic types are defined, and five other arbitrary traffic types can be defined by the network administration. This attribute is used in the route selection process to restrict the route to trunks that support this traffic type. The supportedTrafficType trunk attribute lists all the types of traffic allowed on the trunk. For example, if requiredTrafficType is specified as trafficType1, then only trunks that include trafficType1 in supportedTrafficType will be candidates for this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER voice(0), data(1), video(2), trafficType1(3), trafficType2(4), trafficType3(5), trafficType4(6), trafficType5(7)  

dcmeProfilePermittedTrunkTypes 1.3.6.1.4.1.562.2.4.1.129.2.10.1.5
This attribute specifies up to eight types of trunks that can be used on the route. The terrestrial and satellite trunk types are defined, leaving six remaining arbitrary types that can be defined by the network administration. The trunk's type is indicated in the trunkType attribute of the Trunk component. When selecting a route, PORS chooses only trunks whose trunkTypes are in the permittedTrunkTypes for the path. Description of bits: terrestrial(0) satellite(1) trunkType1(2) trunkType2(3) trunkType3(4) trunkType4(5) trunkType5(6) trunkType6(7)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

dcmeProfileRequiredSecurity 1.3.6.1.4.1.562.2.4.1.129.2.10.1.6
This attribute specifies the required minimum level of security of the trunks on the route. Zero represents the most secure and seven represents the least secure. The trunk's security is indicated by the trunkSecurity attribute of the Trunk component, and has values identical in range and meaning to the requiredSecurity attribute. PORS ensures that any route selected does not contain a trunk whose trunkSecurity attribute is numerically greater than the requiredSecurity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

dcmeProfileRequiredCustomerParm 1.3.6.1.4.1.562.2.4.1.129.2.10.1.7
This attribute specifies the allowed customer defined parameter of the trunks on the route. The value of requiredCustomerParm ranges from 0 to 7. The meaning of each value is specific to a particular network, thus allowing them to customize the use of their trunks. A complementary trunk attribute, customerParameter, also has a value from zero to seven. The route selection process does not consider trunks whose customerParameter is greater than the requiredCustomerParameter of the path.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

dcmeProfilePathAttributeToMinimize 1.3.6.1.4.1.562.2.4.1.129.2.10.1.8
This attribute specifies whether a route is selected on the basis of minimizing the cost or the delay. Each trunk has a cost and a delay metric associated with it. The cost of a selected route is the sum of the trunk cost metrics for all trunks included in the route. The delay of a selected route is the sum of the trunk delay metrics for all trunks included in the route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cost(0), delay(1)  

dcmeProfileMaximumAcceptableCost 1.3.6.1.4.1.562.2.4.1.129.2.10.1.9
This attribute specifies an upper bound on the cost metric of a route, which is the sum of the cost metrics of all trunks on the route. The cost metric is the trunkCost attribute of the Trunk component. If for any trunk the trunkCost is larger than the maximumAcceptableCost, then that trunk is not considered during the route selection. While a shortest route is being selected, the route cost is being compared with the maximumAcceptableCost attribute, and this is done for any minimization criterion. No route is selected if the cost metric of the shortest route is larger than the maximumAcceptableCost.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

dcmeProfileMaximumAcceptableDelay 1.3.6.1.4.1.562.2.4.1.129.2.10.1.10
This attribute specifies an upper bound on the delay of a route, which is the sum of the delays of all trunks on the route. It should be provisioned with a reasonable maximum acceptable delay for the end to end one way delay of a 512-byte packet. During its staging, a trunk measures a measuredRoundTripDelay. This delay is divided by two and truncated to an integer number of milliseconds to provide a one way delay which is used to populate the delay in this trunk object in the topological database. The value includes emission, propagation, and queuing delays. A 512-byte packet is used to perform the measurement. If for any trunk the half of the trunk's measuredRoundTripDelay is larger than the maximumAcceptableDelay, then that trunk is not considered during the route selection. While a shortest route is being selected, the route delay is being compared with the maximumAcceptableDelay attribute, and this is done for any minimization criterion. No route is selected if the delay metric of the shortest route is larger than the maximumAcceptableDelay.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100000  

dcmeProfileEmissionPriority 1.3.6.1.4.1.562.2.4.1.129.2.10.1.11
This attribute specifies the urgency with which packets on the path are emitted by the trunks on the route. An emissionPriority of 0 indicates the highest emission priority, while 2 indicates the lowest emission priority. Packets with a higher emissionPriority (or numerically less) are serviced and sent out before the packets with a lower emissionPriority (or numerically higher).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2  

dcmeProfileDiscardPriority 1.3.6.1.4.1.562.2.4.1.129.2.10.1.12
This attribute specifies the importance of the packets on the path. A discardPriority of 1 is used for paths carrying the most important traffic, and three is used for paths carrying the least important traffic. Packets with lower discardPriority(numerically lower) are discarded after packets with a higher discardPriority(numerically higher).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..3  

dcmeProfilePathFailureAction 1.3.6.1.4.1.562.2.4.1.129.2.10.1.13
This attribute specifies whether the application can tolerate momentary interruption of a path while a new path is selected. If pathFailureAction is disconnectConnection, the application is informed as soon as possible about a failure by disconnection. If pathFailureAction is reRoutePath, the path may attempt an immediate reroute, provided the failure is a recoverable failure. If rerouting fails, the application is informed of the failure. If pathFailureAction is reRoutePath, the LCo may wait up to 30 seconds before informing the service of complete disconnection in order to allow both ends to attempt to reconnect. Note that if PLC components are different at both ends only the calling end is allowed to reconnect. All pathTypes respect this attribute. Also on a manualPath with both ends provisioned with independent paths (at least with respect to the failure) this option has the desired effect that the path is rerouted without complete disconnection at both ends.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disconnectConnection(0), reRoutePath(1)  

dcmeProfileOptimization 1.3.6.1.4.1.562.2.4.1.129.2.10.1.14
This attribute specifies whether this connection should attempt to optimize its path when requested by the Rtg Pors component. Every path is optimal when it is established, but as network traffic patterns and configurations change this path may no longer be optimal. The PORS connection manager on a module requests circuits to optimize at the optimizationInterval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

dcmeProfileFrOpsTable 1.3.6.1.4.1.562.2.4.1.129.2.11
This group contains attributes which define how audio data will be carried across the Passport network.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DcmeProfileFrOpsEntry

dcmeProfileFrOpsEntry 1.3.6.1.4.1.562.2.4.1.129.2.11.1
An entry in the dcmeProfileFrOpsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DcmeProfileFrOpsEntry  

dcmeProfileVoiceEncoding 1.3.6.1.4.1.562.2.4.1.129.2.11.1.1
This attribute specifies the encoding of voice traffic. A voiceEncoding setting of g711G726 specifies that either pulse code modulation (PCM) defined by ITU-T G.711 or adaptive differential pulse code modulation (ADPCM) defined by ITU-T G.726 is used to encode voice traffic. The actual encoding performed depends on congestion in the network and the settings of minVoiceG711G726Rate and maxVoiceG711G726Rate. If voiceEncoding is g711G726, the bit rate of voice traffic can change during a call due to congestion in the network. In this case, the minimum and maximum rates that can occur during a call are specified by minVoiceG711G726Rate and maxVoiceG711G726Rate respectively. If voiceEncoding is g711G726, minVoiceG711G726Rate is 64 and maxVoiceG711G726Rate is 64, G.711 (PCM) encoding is always performed on voice traffic on this channel and all voice traffic is carried uncompressed at 64 kbit/s. A voiceEncoding setting of g728at16 specifies that the Low Delay Coded Excited Linear Predictive Coder (LD-CELP) algorithm defined by ITU-T G.728 is always performed on voice traffic. If voiceEncoding is g728at16, the bit rate of all voice traffic is fixed at 16 kbit/s. The minVoiceG711G726Rate and maxVoiceG711G726Rate attributes do not apply if voiceEncoding is g728at16. A voiceEncoding setting of g729at8 indicates that the Conjugated Structure Algebraic Code Excited Linear Predictive Coder (CS- ACELP) algorithm defined by ITU-T G.729 is always performed on voice traffic. If voiceEncoding is g729at8, the bit rate of all voice traffic is fixed at 8 kbit/s. The minVoiceG711G726Rate and maxVoiceG711G726Rate attributes do not apply if voiceEncoding is g729at8.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER g711G726(0), g728at16(1), g729at8(2)  

dcmeProfileMaxVoiceBitRate 1.3.6.1.4.1.562.2.4.1.129.2.11.1.2
This attribute specifies the maximum possible bit rate (minimum possible compression rate) during a voice call on this channel when voiceEncoding is g711G726. It applies only to voice traffic, not modem or fax traffic. It also applies only if voiceEncoding is g711G726. If voiceEncoding is g711G726, the bit rate of voice traffic can change during a call due to congestion in the network. In this case, the minimum and maximum rates that can occur during a call are specified by minVoiceG711G726Rate and maxVoiceG711G726Rate respectively. If voiceEncoding is g711G726, minVoiceG711G726Rate is 64 and maxVoiceG711G726Rate is 64, the G.711 (PCM) algorithm is always performed on voice traffic on this channel and all voice traffic is carried uncompressed at 64 kbit/s.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n64(0), n32(1), n24(2)  

dcmeProfileMinVoiceBitRate 1.3.6.1.4.1.562.2.4.1.129.2.11.1.3
This attribute specifies the minimum possible bit rate (maximum possible compression rate) during a voice call on this channel when voiceEncoding is g711G726. It applies only to voice traffic, not modem or fax traffic. It also applies only if voiceEncoding is g711G726. If voiceEncoding is g711G726, the bit rate of voice traffic can change during a call due to congestion in the network. In this case, the minimum and maximum rates that can occur during a call are specified by minVoiceG711G726Rate and maxVoiceG711G726Rate respectively. If voiceEncoding is g711G726, minVoiceG711G726Rate is 64 and maxVoiceG711G726Rate is 64, the G.711 (PCM) algorithm is always performed on voice traffic on this channel and all voice traffic is carried uncompressed at 64 kbit/s.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n64(0), n32(1), n24(2)  

dcmeProfileVoiceTrafficOptimization 1.3.6.1.4.1.562.2.4.1.129.2.11.1.4
This attribute specifies how to optimize voice traffic. If voiceTrafficOptimization is bandwidth, voice traffic is optimized to preserve bandwidth. If voiceTrafficOptimization is delay, voice traffic is optimized to minimize delay.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bandwidth(0), delay(1)  

dcmeProfileSilenceSuppression 1.3.6.1.4.1.562.2.4.1.129.2.11.1.5
This attribute specifies when silence suppression is performed. It applies to both voice and modem calls. If silenceSuppression is off, silence suppression is never performed. If silenceSuppression is on, silence suppression is always performed. If silenceSuppression is congested, silence suppression is performed only when the network is congested. If silenceSuppression is slow, silence suppression begins after 10 to 20 seconds without any detected speech or modem traffic. If silenceSuppression is slowAndCongested, both the slow and congested options are applied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1), congested(2), slow(3), slowAndCongested(4)  

dcmeProfileSilenceSuppressionFactor 1.3.6.1.4.1.562.2.4.1.129.2.11.1.6
This attribute specifies the expected savings (percent reduction) in required bandwidth if silence suppression is used. If silence suppression is used, the bandwidth required for the connection will be lower than if silence suppression is not used. However, the routing system will not be aware of the unused bandwidth unless that bandwidth is specified by this attribute. If the value specified for the expected savings is too low, then some bandwidth made available by the use of silence suppression will be wasted. If the value specified for the expected savings is too high, then some connections may fail to set up because the routing system will over-calculate the amount of bandwidth available. The effectiveness of silence suppression can be influenced by language related speech patterns.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..60  

dcmeProfileEchoCancellation 1.3.6.1.4.1.562.2.4.1.129.2.11.1.7
This attribute specifies whether echo cancellation is performed on calls using this profile as specified by ITU-T G.165. It applies mainly to voice traffic. Echo cancellation is usually (but not always) disabled during modem and fax calls. If echoCancellation is on, the traffic that is echo cancelled is determined by ITU-T G.165.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

dcmeProfileModemFaxEncoding 1.3.6.1.4.1.562.2.4.1.129.2.11.1.9
This attribute specifies how modem and fax traffic is encoded. Modem and fax traffic are identified by an inband 2100 Hz tone. Prior to the detection of a 2100 Hz tone, all traffic is handled according to voiceEncoding. If modemFaxEncoding is useVoiceEncoding, 2100 Hz tones are not detected on the channel. In this case, the channel does not differentiate between modem and fax traffic and voice traffic. All traffic is handled according to voiceEncoding. If voiceEncoding is g728at16 or g729at8, modem and fax calls will not work. If a 2100 Hz tone is detected and modemFaxEncoding is g711G726, all subsequent traffic during a call is encoded using pulse code modulation (PCM) defined by ITU-T G.711 or adaptive differential pulse code modulation (ADPCM) defined by ITU-T G.726. When the 2100 Hz tone is detected, traffic is initially encoded at the rate specified by maxModemFaxG711G726Rate. For the duration of the call, the bit rate can change due to network congestion. In this case, the minimum and maximum rates that can occur during the call are specified by minModemFaxG711G726Rate and maxModemFaxG711G726Rate respectively. If a 2100 Hz tone is detected and modemFaxEncoding is faxRelayG711G726, encoding switches to G.711 or G.726 at the rate specified in maxModemFaxG711G726Rate, exactly as it does if modemFaxEncoding is g711G726. Until a fax preamble is detected, the rate may fluctuate between maxModemFaxG711G726Rate and minModemFaxG711G726Rate due to network congestion, exactly as it does if modemFaxEncoding is g711G726. If a fax preamble is detected, all subsequent traffic during a call is demodulated and sent through the network as cells at the base rate of the sending machine. Supported demodulation methods are V.29 (up to 9.6 kbit/s) and V.27 (up to 4.8 kbit/s). The modulation and demodulation of fax traffic is called 'fax relay'. If a 2100 Hz tone is detected and modemFaxEncoding is faxRelayOnly, this channel does not wait for a fax preamble to switch to 'fax relay'. Instead, 'fax relay' is entered immediately. If modemFaxEncoding is faxRelayOnly, modem calls do not work on this Dcme. Therefore, this setting is only appropriate if modem calls are not made on the channel. The faxRelay feature is required to set modemFaxEncoding to faxRelayG711G726 or faxRelayOnly. modemFaxEncoding must have the same value at both ends of a Dcme. If modemFaxEncoding is not provisioned with the same values at both ends of a Dcme, the Dcme will not be able to carry the modem and fax traffic successfully.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER g711G726(0), faxRelayOnly(1), faxRelayG711G726(2), useVoiceEncoding(3)  

dcmeProfileMaxModemFaxG711G726Rate 1.3.6.1.4.1.562.2.4.1.129.2.11.1.10
This attribute specifies the maximum possible bit rate (minimum possible compression rate) during a modem call on this channel. It also specifies the maximum possible bit rate (minimum possible compression rate) during a fax call on this channel, but only if faxEncoding is g711G726. maxModemFaxG711G726Rate always applies to modem traffic, and never applies to voice traffic. If faxEncoding is g711G726, maxModemFaxG711G726Rate also applies to fax traffic. If faxEncoding is faxRelay, maxModemFaxG711G726Rate does not apply to fax traffic. Rates can change during a call due to congestion in the network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n64(0), n32(1)  

dcmeProfileMinModemFaxG711G726Rate 1.3.6.1.4.1.562.2.4.1.129.2.11.1.11
This attribute specifies the minimum possible bit rate (maximum possible compression rate) during a modem call on this channel. It also specifies the minimum possible bit rate (maximum possible compression rate) during a fax call on this channel, but only if faxEncoding is g711G726. minModemFaxG711G726Rate always applies to modem traffic, and never applies to voice traffic. If faxEncoding is g711G726, minModemFaxG711G726Rate also applies to fax traffic. If faxEncoding is faxRelay, minModemFaxG711G726Rate does not apply to fax traffic. Rates can change during a call due to congestion in the network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n64(0), n32(1)  

dcmeProfileFaxIdleSuppressionG711G726 1.3.6.1.4.1.562.2.4.1.129.2.11.1.12
This attribute specifies whether fax idle suppression is performed on fax traffic on calls using this profile. It only applies to fax traffic, not voice or modem traffic. It also only applies if fax traffic is carried using G.711 or G.726.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

dcmeProfileInsertedOutputDelay 1.3.6.1.4.1.562.2.4.1.129.2.11.1.13
This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to voice, modem and fax traffic. It is required to add output delay so that the statistical variation in the transit time of cells crossing the network does not cause gaps in speech. Backbone networks where high priority traffic consumes a high percentage of trunk bandwidth will require a higher insertedOutputDelay to compensate for the greater cell delay variation (CDV).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n5(5), n15(15), n22(22), n30(30), n35(35), n40(40), n45(45), n50(50), n75(75), n100(100), n125(125), n150(150)  

dcmeProfileIngressAudioGain 1.3.6.1.4.1.562.2.4.1.129.2.11.1.14
This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across the network. It applies to voice, modem and fax traffic. For example, ingress gain is applied to audio data coming from a PBX. If ingressAudioGain is negative, a loss is applied. ingressAudioGain and egressAudioGain are used in loss planning, which is the configuration of the devices in a network to ensure that the signal level from any point in the network to any other point is correct.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -12..12  

dcmeProfileEgressAudioGain 1.3.6.1.4.1.562.2.4.1.129.2.11.1.15
This attribute specifies the gain in dB that is applied to data leaving the network on this route. It applies to voice, modem and fax traffic. For example, egress gain is applied to audio data going to a PBX. If egressAudioGain is negative, a loss is applied. ingressAudioGain and egressAudioGain are used in loss planning, which is the configuration of the devices in the network to ensure that the signal level from any point in the network to any other point is correct.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -12..12  

dcmeProfileSpeechHangoverTime 1.3.6.1.4.1.562.2.4.1.129.2.11.1.16
This attribute specifies the time after the end of speech before silence suppression starts. It applies only to voice traffic. Higher values of speechHangoverTime reduce undesirable clipping but increase bandwidth usage.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 10..500  

dcmeProfileComfortNoiseCap 1.3.6.1.4.1.562.2.4.1.129.2.11.1.17
This attribute specifies the maximum level at which comfort noise is generated. The comfort noise is limited by comfortNoiseCap before egressAudioGain is applied. The default value of -40 dBm0 equates to the maximum level of comfort noise available and effectively disables the comfortNoiseCap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -78 | -65 | -60 | -54 | -52 | -50 | -48 | -46 | -44 | -42 | -40  

dcmeProfileModemFaxSpeechDiscrim 1.3.6.1.4.1.562.2.4.1.129.2.11.1.18
This attribute specifies whether this Dcme differentiates between modemFax traffic and speech. If modemFaxSpeechDiscrim is on and a false 2100 Hz tone is detected, any Vs under this Dcme reverts to speech mode when speech is detected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

dcmeProfileV17EncodedAsG711G726 1.3.6.1.4.1.562.2.4.1.129.2.11.1.19
This attribute specifies how services using this Profile negotiate with V.17 fax machines. This attribute is not used unless the modemFaxEncoding, defined in this Profile, is faxRelayG711G726 If v17EncodedAsG711G726 is no, V.17 fax machines are instructed to use V.29 and V.29 fax traffic sent by fax machines is demodulated and encoded using fax relay. If v17EncodedAsG711G726 is yes, V.17 fax machines are permitted to use V.17 and V.17 fax traffic sent by fax machines is encoded using G.711 or G.726. The actual encoding performed depends on the minModemFaxG711G726Rate and maxModemFaxG711G726Rate, available in this Profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

dcmeProfileDtmfRegeneration 1.3.6.1.4.1.562.2.4.1.129.2.11.1.20
This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfRegeneration is on, it is desired that DTMF tones received from the link are first converted to digits before being sent to the subnet. When a digit is received from the subnet, its respective DTMF tone is desired to be generated before being sent to the link. If dtmfRegeneration is off, it is desired that DTMF tones are transported transparently as audio.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

dcmeProfileMaxFaxRelayRate 1.3.6.1.4.1.562.2.4.1.129.2.11.1.21
This attribute specifies the maximum desired fax relay rate. This attribute only applies if modemFaxEncoding is faxRelayOnly or faxRelayG711G726.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FixedPoint1 24 | 48 | 72 | 96 | 120 | 144  

dcl 1.3.6.1.4.1.562.2.4.1.130
OBJECT IDENTIFIER    

dclRowStatusTable 1.3.6.1.4.1.562.2.4.1.130.1
This entry controls the addition and deletion of dcl components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclRowStatusEntry

dclRowStatusEntry 1.3.6.1.4.1.562.2.4.1.130.1.1
A single entry in the table represents a single dcl component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclRowStatusEntry  

dclRowStatus 1.3.6.1.4.1.562.2.4.1.130.1.1.1
This variable is used as the basis for SNMP naming of dcl components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

dclComponentName 1.3.6.1.4.1.562.2.4.1.130.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dclStorageType 1.3.6.1.4.1.562.2.4.1.130.1.1.4
This variable represents the storage type value for the dcl tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

dclIndex 1.3.6.1.4.1.562.2.4.1.130.1.1.10
This variable represents the index for the dcl tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..14  

dclProvTable 1.3.6.1.4.1.562.2.4.1.130.10
This group contains the provisionable attributes of a DcmeLink.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclProvEntry

dclProvEntry 1.3.6.1.4.1.562.2.4.1.130.10.1
An entry in the dclProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclProvEntry  

dclCommentText 1.3.6.1.4.1.562.2.4.1.130.10.1.1
Use of this attribute is at the discretion of the system administrator. Typically, it specifies the name of the customer that is using this DcmeLink.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..40)  

dclRemoteNpi 1.3.6.1.4.1.562.2.4.1.130.10.1.2
This attribute specifies the Numbering Plan Indicator used for the remoteDna attribute of this DcmeLink.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

dclRemoteDna 1.3.6.1.4.1.562.2.4.1.130.10.1.3
This attribute specifies the Data Network Address (DNA) of the remote DcmeLink. This is the DNA of the peer DcmeLink to which the DcmeLink component establishes its Logical Connection (LC).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DigitString Size(1..15)  

dclDcme 1.3.6.1.4.1.562.2.4.1.130.10.1.4
This attribute specifies the Dcme component that this DcmeLink belongs to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

dclIdlePattern 1.3.6.1.4.1.562.2.4.1.130.10.1.5
This attribute specifies an idlePattern in the channel received from the E1 interface, which is required to determine if the channel is active or not. When the end of the idlePattern is detected it indicates the start of a new speech call. When this idlePattern is detected it indicates the end of a speech call. When changing this attribute make sure that the alternateIdlePattern attibute is set correctly.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Hex 0..255  

dclAlternateIdlePattern 1.3.6.1.4.1.562.2.4.1.130.10.1.6
This attribute specifies an alternateIdlePattern in the channel received from the E1 interface, after the end of a 64kbit/s call. The value of this attribute should be different than the value of the idlePattern attribute only if the ISC is programmed for Even/Odd Bit Inversion (EBI/OBI). This is only the case when the ISC is performing A to Mu or Mu to A Law conversion. When the end of the alternateIdlePattern is detected it indicates the start of a new speech call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Hex 0..255  

dclStateTable 1.3.6.1.4.1.562.2.4.1.130.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclStateEntry

dclStateEntry 1.3.6.1.4.1.562.2.4.1.130.11.1
An entry in the dclStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclStateEntry  

dclAdminState 1.3.6.1.4.1.562.2.4.1.130.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

dclOperationalState 1.3.6.1.4.1.562.2.4.1.130.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

dclUsageState 1.3.6.1.4.1.562.2.4.1.130.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

dclOperTable 1.3.6.1.4.1.562.2.4.1.130.12
This group provides the operational attributes for the DcmeLink component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclOperEntry

dclOperEntry 1.3.6.1.4.1.562.2.4.1.130.12.1
An entry in the dclOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclOperEntry  

dclActiveSpeechCalls 1.3.6.1.4.1.562.2.4.1.130.12.1.1
This attribute indicates the number of speech calls that are currently in progress on this DcmeLink.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..30  

dclActive3kHzCalls 1.3.6.1.4.1.562.2.4.1.130.12.1.2
This attribute indicates the number of audio 3.1 kHz calls that are currently in progress on this DcmeLink.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..30  

dclActive64kCalls 1.3.6.1.4.1.562.2.4.1.130.12.1.3
This attribute indicates the number of unrestricted 64 kbit/s calls that are currently in progress on this DcmeLink.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..30  

dclReceivedTrmSignal 1.3.6.1.4.1.562.2.4.1.130.12.1.4
This attribute indicates the last TRM signal received from the ISC. The received TRM signal can be one of: Invalid (xxx): this signal should never be received, Switching Centre normal (101): this signal is allways transmitted by the ISC when there is no other signal to be sent, Maintenance release ack(110): this signal is transmitted by the ISC if it accepts the maintenance release request, Dcme clear of traffic: this signal is transmitted by the ISC if it has accepted the maintenance release request signal and now informs the DCME when all circuits are idle,
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none000(0), invalid001(1), invalid010(2), invalid011(3), invalid100(4), switchingCentreNormal101(5), maintenanceReleaseAck110(6), dcmeClearOfTraffic111(7)  

dclTransmittedTrmSignal 1.3.6.1.4.1.562.2.4.1.130.12.1.5
This attribute indicates the last TRM signal transmitted to the ISC. The transmitted TRM signal can be one of: Dcme normal (100): , this signal is allways transmitted by the DCME when there is no other signal to be sent, No 64 kbit/s capacity (101): this signal is transmitted by the DCME when it is not able to handle new 64 kbit/s call requests, Maintenance release request(110): this signal is transmitted by the DCME when the DCME is to be removed from the service for maintenance, No capacity available (111) this signal is transmitted by the DCME when there is bearer capacity available to set up new 3.1 kHz audio or speech calls,
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none000(0), dcmeNormal100(4), no64KbitSCapacity101(5), maintenanceReleaseRequest110(6), noCapacityAvailable111(7)  

dclStatsTable 1.3.6.1.4.1.562.2.4.1.130.13
This group contains statistics for the DcmeLink component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclStatsEntry

dclStatsEntry 1.3.6.1.4.1.562.2.4.1.130.13.1
An entry in the dclStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclStatsEntry  

dclTotalSpeechCalls 1.3.6.1.4.1.562.2.4.1.130.13.1.1
This attribute counts the total number of speech calls that have been handled by this DcmeLink, including rejected calls. This counter wraps to zero when it exceeds its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

dclTotal3kHzCalls 1.3.6.1.4.1.562.2.4.1.130.13.1.2
This attribute counts the total number of audio 3.1 kHz calls that have been handled by this DcmeLink, including rejected calls. This counter wraps to zero when it exceeds its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

dclTotal64kCalls 1.3.6.1.4.1.562.2.4.1.130.13.1.3
This attribute counts the total number of unrestricted 64 kbit/s calls that have been handled by this DcmeLink, including rejected calls. This counter wraps to zero when it exceeds its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

dclRejectedSpeechCalls 1.3.6.1.4.1.562.2.4.1.130.13.1.4
This attribute counts the total number of speech calls that have been rejected by this DcmeLink because there was no preestablished LC available. This counter wraps to zero when it exceeds its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

dclRejected3kHzCalls 1.3.6.1.4.1.562.2.4.1.130.13.1.5
This attribute counts the total number of audio 3.1 KHz calls that have been rejected by this DcmeLink because there was no preestablished LC available. This counter wraps to zero when it exceeds its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

dclRejected64kCalls 1.3.6.1.4.1.562.2.4.1.130.13.1.6
This attribute counts the total number of unrestricted 64 kbit/s calls that have been rejected by this DcmeLink. This counter wraps to zero when it reaches its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

dclInvalidTrmSignals 1.3.6.1.4.1.562.2.4.1.130.13.1.7
This attribute counts the number of invalid TRM/Maintenance signals received from the ISC by this DcmeLink. The most probable cause of an invalid TRM/Maintenance signal is an invalid ISC provisionning or a transmission error. The invalid bit settings are 000, 001, 010, 011, 100. This counter wraps to zero when it exceeds its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

dclDna 1.3.6.1.4.1.562.2.4.1.130.2
OBJECT IDENTIFIER    

dclDnaRowStatusTable 1.3.6.1.4.1.562.2.4.1.130.2.1
This entry controls the addition and deletion of dclDna components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclDnaRowStatusEntry

dclDnaRowStatusEntry 1.3.6.1.4.1.562.2.4.1.130.2.1.1
A single entry in the table represents a single dclDna component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclDnaRowStatusEntry  

dclDnaRowStatus 1.3.6.1.4.1.562.2.4.1.130.2.1.1.1
This variable is used as the basis for SNMP naming of dclDna components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

dclDnaComponentName 1.3.6.1.4.1.562.2.4.1.130.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dclDnaStorageType 1.3.6.1.4.1.562.2.4.1.130.2.1.1.4
This variable represents the storage type value for the dclDna tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

dclDnaIndex 1.3.6.1.4.1.562.2.4.1.130.2.1.1.10
This variable represents the index for the dclDna tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

dclDnaAddressTable 1.3.6.1.4.1.562.2.4.1.130.2.10
The Address group contains attributes common to all Dna's. Every Dna used in the network is defined with this group of 2 attributes. The string of address digits is complemented by the type of address or Npi. These attributes are used to interpret the format of the address digits.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclDnaAddressEntry

dclDnaAddressEntry 1.3.6.1.4.1.562.2.4.1.130.2.10.1
An entry in the dclDnaAddressTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclDnaAddressEntry  

dclDnaNumberingPlanIndicator 1.3.6.1.4.1.562.2.4.1.130.2.10.1.1
This attribute indicates the Numbering Plan Indicator (NPI) of the Dna that is entered. An address may belong to the X.121 or E.164 numbering plans. X.121 is used in packet switched data networks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

dclDnaDataNetworkAddress 1.3.6.1.4.1.562.2.4.1.130.2.10.1.2
The Dna attribute contains digits which form a unique identifier of the customer interface. It can be compared (approximation only) to a telephone number where each phone number identifies a unique telephone set. Dna digits are selected and assigned by network operators.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DigitString Size(1..15)  

dclFramer 1.3.6.1.4.1.562.2.4.1.130.3
OBJECT IDENTIFIER    

dclFramerRowStatusTable 1.3.6.1.4.1.562.2.4.1.130.3.1
This entry controls the addition and deletion of dclFramer components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclFramerRowStatusEntry

dclFramerRowStatusEntry 1.3.6.1.4.1.562.2.4.1.130.3.1.1
A single entry in the table represents a single dclFramer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclFramerRowStatusEntry  

dclFramerRowStatus 1.3.6.1.4.1.562.2.4.1.130.3.1.1.1
This variable is used as the basis for SNMP naming of dclFramer components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

dclFramerComponentName 1.3.6.1.4.1.562.2.4.1.130.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dclFramerStorageType 1.3.6.1.4.1.562.2.4.1.130.3.1.1.4
This variable represents the storage type value for the dclFramer tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

dclFramerIndex 1.3.6.1.4.1.562.2.4.1.130.3.1.1.10
This variable represents the index for the dclFramer tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

dclFramerProvTable 1.3.6.1.4.1.562.2.4.1.130.3.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclFramerProvEntry

dclFramerProvEntry 1.3.6.1.4.1.562.2.4.1.130.3.10.1
An entry in the dclFramerProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclFramerProvEntry  

dclFramerInterfaceName 1.3.6.1.4.1.562.2.4.1.130.3.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

dclFramerStateTable 1.3.6.1.4.1.562.2.4.1.130.3.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclFramerStateEntry

dclFramerStateEntry 1.3.6.1.4.1.562.2.4.1.130.3.12.1
An entry in the dclFramerStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclFramerStateEntry  

dclFramerAdminState 1.3.6.1.4.1.562.2.4.1.130.3.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

dclFramerOperationalState 1.3.6.1.4.1.562.2.4.1.130.3.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

dclFramerUsageState 1.3.6.1.4.1.562.2.4.1.130.3.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

dclVs 1.3.6.1.4.1.562.2.4.1.130.4
OBJECT IDENTIFIER    

dclVsRowStatusTable 1.3.6.1.4.1.562.2.4.1.130.4.1
This entry controls the addition and deletion of dclVs components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsRowStatusEntry

dclVsRowStatusEntry 1.3.6.1.4.1.562.2.4.1.130.4.1.1
A single entry in the table represents a single dclVs component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsRowStatusEntry  

dclVsRowStatus 1.3.6.1.4.1.562.2.4.1.130.4.1.1.1
This variable is used as the basis for SNMP naming of dclVs components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

dclVsComponentName 1.3.6.1.4.1.562.2.4.1.130.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dclVsStorageType 1.3.6.1.4.1.562.2.4.1.130.4.1.1.4
This variable represents the storage type value for the dclVs tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

dclVsIndex 1.3.6.1.4.1.562.2.4.1.130.4.1.1.10
This variable represents the index for the dclVs tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..31  

dclVsProvTable 1.3.6.1.4.1.562.2.4.1.130.4.10
This group contains the provisionable attributes of a DcmeVs component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsProvEntry

dclVsProvEntry 1.3.6.1.4.1.562.2.4.1.130.4.10.1
An entry in the dclVsProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsProvEntry  

dclVsVsType 1.3.6.1.4.1.562.2.4.1.130.4.10.1.1
This attribute specifies the type of calls offered by this DcmeVs. If the value permanent64kVs is selected the 64 kbit/s call is established on the channel associated with this DcmeVs upon system activation. If this call is cleared due to the subnet failure it is reestablished again by the DcmeLink. If the value dynamicVs is selected this channel can be used to establish user selected calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dynamicVs(0), permanent64kVs(1)  

dclVsOperTable 1.3.6.1.4.1.562.2.4.1.130.4.11
This group provides the operational attributes for the DcmeVoiceService component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsOperEntry

dclVsOperEntry 1.3.6.1.4.1.562.2.4.1.130.4.11.1
An entry in the dclVsOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsOperEntry  

dclVsStatus 1.3.6.1.4.1.562.2.4.1.130.4.11.1.1
This attribute indicates the current status of the channel. idle means that there is no call currently active on this channel. seized means that the channel has currently an active call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), seized(1)  

dclVsCallType 1.3.6.1.4.1.562.2.4.1.130.4.11.1.3
This attribute indicates the type of call that this channel is currently carrying. If no call is active, then it displays the value for the last call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), speech(1), n31KHz(2), n64KbitS(3)  

dclVsReceivedAbBits 1.3.6.1.4.1.562.2.4.1.130.4.11.1.4
This attribute indicates the most recently received AB bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none00(0), normalServiceAvailable01(1), n31KHzRequest10(2), n64KbitSRequest11(3)  

dclVsTransmittedAbBits 1.3.6.1.4.1.562.2.4.1.130.4.11.1.5
This attribute indicates the AB bits currently being transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none00(0), normalServiceAvailable01(1), specialServiceAck10(2), channelOutOfService11(3)  

dclVsStatsTable 1.3.6.1.4.1.562.2.4.1.130.4.12
This group provides the operational attributes for the DcmeVoiceService component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsStatsEntry

dclVsStatsEntry 1.3.6.1.4.1.562.2.4.1.130.4.12.1
An entry in the dclVsStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsStatsEntry  

dclVsTotalCalls 1.3.6.1.4.1.562.2.4.1.130.4.12.1.1
This attribute counts the call attempts processed on this channel (in both directions). This count includes both successful and unsuccessful calls. The value wraps when it exceeds its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

dclVsTotalCallSeconds 1.3.6.1.4.1.562.2.4.1.130.4.12.1.2
This attribute counts the total number of seconds that this channel is handling a call. This is regardless of whether the call is successful or not. In other words, this is the amount of time that the channel is not in the idle state. The value wraps when it reaches its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

dclVsInvalidAbBits 1.3.6.1.4.1.562.2.4.1.130.4.12.1.3
This attribute counts the number of invalid AB bits signals received from the ISC on this channel. The invalid bit setting is 00. This counter wraps to zero when it reaches its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

dclVsStateTable 1.3.6.1.4.1.562.2.4.1.130.4.13
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsStateEntry

dclVsStateEntry 1.3.6.1.4.1.562.2.4.1.130.4.13.1
An entry in the dclVsStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsStateEntry  

dclVsAdminState 1.3.6.1.4.1.562.2.4.1.130.4.13.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

dclVsOperationalState 1.3.6.1.4.1.562.2.4.1.130.4.13.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

dclVsUsageState 1.3.6.1.4.1.562.2.4.1.130.4.13.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

dclVsFramer 1.3.6.1.4.1.562.2.4.1.130.4.2
OBJECT IDENTIFIER    

dclVsFramerRowStatusTable 1.3.6.1.4.1.562.2.4.1.130.4.2.1
This entry controls the addition and deletion of dclVsFramer components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsFramerRowStatusEntry

dclVsFramerRowStatusEntry 1.3.6.1.4.1.562.2.4.1.130.4.2.1.1
A single entry in the table represents a single dclVsFramer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsFramerRowStatusEntry  

dclVsFramerRowStatus 1.3.6.1.4.1.562.2.4.1.130.4.2.1.1.1
This variable is used as the basis for SNMP naming of dclVsFramer components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

dclVsFramerComponentName 1.3.6.1.4.1.562.2.4.1.130.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dclVsFramerStorageType 1.3.6.1.4.1.562.2.4.1.130.4.2.1.1.4
This variable represents the storage type value for the dclVsFramer tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

dclVsFramerIndex 1.3.6.1.4.1.562.2.4.1.130.4.2.1.1.10
This variable represents the index for the dclVsFramer tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

dclVsFramerProvTable 1.3.6.1.4.1.562.2.4.1.130.4.2.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsFramerProvEntry

dclVsFramerProvEntry 1.3.6.1.4.1.562.2.4.1.130.4.2.10.1
An entry in the dclVsFramerProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsFramerProvEntry  

dclVsFramerInterfaceName 1.3.6.1.4.1.562.2.4.1.130.4.2.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

dclVsFramerStateTable 1.3.6.1.4.1.562.2.4.1.130.4.2.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsFramerStateEntry

dclVsFramerStateEntry 1.3.6.1.4.1.562.2.4.1.130.4.2.14.1
An entry in the dclVsFramerStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsFramerStateEntry  

dclVsFramerAdminState 1.3.6.1.4.1.562.2.4.1.130.4.2.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

dclVsFramerOperationalState 1.3.6.1.4.1.562.2.4.1.130.4.2.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

dclVsFramerUsageState 1.3.6.1.4.1.562.2.4.1.130.4.2.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

dclVsFramerStatsTable 1.3.6.1.4.1.562.2.4.1.130.4.2.15
This group contains the operational statistics data for a Framer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsFramerStatsEntry

dclVsFramerStatsEntry 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1
An entry in the dclVsFramerStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsFramerStatsEntry  

dclVsFramerTotalCells 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.1
This attribute counts the total number of cells received from the interface. Each cell contains 44 bytes of data from the DS0 channel. Since a DS0 provides data at 64 kbit/s, each cell contains 5.5 ms of audio data. This data flow is measured before compression is performed on the channel. This counter wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dclVsFramerAudioCells 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.2
This attribute counts the total number of cells containing audio data received from the interface while the channel was seized. A CCS channel is always considered to be seized. Audio data includes cells containing voice as well modem audio, but not silence. A cell contains 44 bytes of data from the DS0 channel(5.5 ms). This flow is measured before compression is performed on the channel. This counter wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dclVsFramerSilenceCells 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.4
This attribute counts the total number of cells containing silence data received from the interface which was not forwarded into the network, thus saving bandwidth. A channel may go into silence due to the operation of the silence suppression feature or for CAS channels when the ABCD signalling bits go idle. A cell contains 44 bytes of data from the DS0 channel(5.5 ms). This flow is measured before compression is performed on the channel. This counter wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dclVsFramerModemCells 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.5
This attribute is migrated into modemFaxCells.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dclVsFramerCurrentEncodingRate 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.6
This attribute has been migrated to currentRate in Operational group.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER n640(1), n320(2), n240(3), n160(4), n80(5), n144(6), n120(7), n96(8), n72(9), n63(10), n53(11), n48(12), n24(13), n12(14), n03(15)  

dclVsFramerLrcErrors 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.7
This attribute counts the number of frames received from the network with LRC errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dclVsFramerFrmLostInNetwork 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.8
This attribute counts the number of frames which the service knows it did not receive from the network although they were sent in to the network from the far end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dclVsFramerFrmUnderRuns 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.9
This attribute counts the number of times that a frame was needed but was not available because it had been delayed too long in the network. This error may occur repeatedly if the interface clocks at the two access points to the network are operating at different rates.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dclVsFramerFrmDumped 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.10
This attribute counts the number of frames which have been dumped because the output queue grew too large. This can occur if the clock rate on the incoming interface is faster than the clock rate on the outgoing interface and there are no silence periods to absorb the difference, or when a compression rate change occurs. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dclVsFramerModemSilenceCells 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.26
This attribute is migrated into faxIdleCells.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

dclVsFramerCurrentEncoding 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.27
This attribute has been migrated to currentEncoding in Operational group.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER g729(1), g728(2), g723(3), g726(4), g711(5), v22(32), v22bis(33), faxRelay(64), v27(65), v29(66), v17(67), none(255)  

dclVsFramerTptStatus 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.28
This attribute has been migrated to tptStatus in Operational group.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER operating(0), rejected(1), monitoring(2), disabled(3)  

dclVsFramerFaxRelayCells 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.35
This attribute counts the total number of fax relay cells sent to the network. This counter wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

dclVsFramerModemFaxCells 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.36
This attribute counts the total number of cells containing modem data received from the interface while the channel was seized. A CCS channel is always considered to be seized. Cells are considered to be modem data if a constant energy level above -25 dBmO is detected for more than 900 ms. An energy level below -36 dBmO for more than 650 ms is required to detect that the modem is no longer present. A cell contains 44 bytes of data from the DS0 channel (5.5 ms). This flow is measured before compression is performed on the channel. This counter wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dclVsFramerFaxIdleCells 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.37
This attribute counts the total number of cells containing silent fax data received from the interface which were not forwarded into the network, thus saving bandwidth. A channel may go into silence due to the silence Suppression feature or for CAS channels when the ABCD signalling bits go idle. A cell contains 44 bytes of data from the DS0 channel (5.5 ms). This flow is measured before compression is performed on the channel. This counter wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

dclVsFramerOperTable 1.3.6.1.4.1.562.2.4.1.130.4.2.16
This group contains the operational data for a Svs Framer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsFramerOperEntry

dclVsFramerOperEntry 1.3.6.1.4.1.562.2.4.1.130.4.2.16.1
An entry in the dclVsFramerOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsFramerOperEntry  

dclVsFramerOpCurrentEncoding 1.3.6.1.4.1.562.2.4.1.130.4.2.16.1.1
This attribute indicates the encoding currently being performed on this channel. g711 indicates that pulse code modulation (PCM) defined by ITU-T G.711 is being performed. g726 indicates that adaptive differential pulse code modulation (ADPCM) defined by ITU-T G.726 is being performed. g728 indicates that the Low Delay Coded Excited Linear Predictive Coder (LD-CELP) algorithm defined by ITU-T G.728 is being performed. g729 indicates that the Conjunctive Structure Algebraic Code Excited Linear Predictive Coder (CS-ACELP) algorithm defined by ITU-T G.729 is being performed. v27 indicates that the algorithm defined by ITU-T V.27 is being performed. v29 indicates that the algorithm defined by ITU-T V.29 is being performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER g729(1), g728(2), g723(3), g726(4), g711(5), v22(32), v22bis(33), faxRelay(64), v27(65), v29(66), v17(67), none(255)  

dclVsFramerCurrentRate 1.3.6.1.4.1.562.2.4.1.130.4.2.16.1.2
This attribute indicates the current encoding rate for frames being sent to the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER n0(0), n640(1), n320(2), n240(3), n160(4), n80(5), n144(6), n120(7), n96(8), n72(9), n63(10), n53(11), n48(12), n24(13), n12(14), n03(15)  

dclVsFramerOpTptStatus 1.3.6.1.4.1.562.2.4.1.130.4.2.16.1.3
This attribute indicates the current status of the tandem pass through algorithm. If tptStatus is operating, the tandem pass through algorithm is cutting through a voice switch. If tptStatus is monitoring, negotiatedTandemPassThrough is enabled, but the tandem pass through algorithm is not cutting through a voice switch. If tptStatus is disabled, negotiatedTandemPassThrough is disabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER operating(0), monitoring(2), disabled(3)  

dclVsFramerNegTable 1.3.6.1.4.1.562.2.4.1.130.4.2.17
This group contains the attributes indicating the results of voice networking end to end negotiation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsFramerNegEntry

dclVsFramerNegEntry 1.3.6.1.4.1.562.2.4.1.130.4.2.17.1
An entry in the dclVsFramerNegTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsFramerNegEntry  

dclVsFramerNegotiatedSilenceSuppression 1.3.6.1.4.1.562.2.4.1.130.4.2.17.1.1
This attribute indicates the result of negotiating silence suppression with the remote end across the subnet. The parameter used for negotiating with the remote end is provisioned in Vncs Vp silenceSuppression. If negotiatedSilenceSuppression is off, silence suppression is never performed. If negotiatedSilenceSuppression is on, silence suppression is always performed. If negotiatedSilenceSuppression is congested, silence suppression is performed only when the network is congested. If negotiatedSilenceSuppression is slow, silence suppression begins after 10 to 20 seconds without any speech or audio being detected. If negotiatedSilenceSuppression is slowAndCongested, both the slow and congested options are applied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1), congested(2), slow(3), slowAndCongested(4)  

dclVsFramerNegotiatedFisG711G726 1.3.6.1.4.1.562.2.4.1.130.4.2.17.1.2
This attribute indicates the result of negotiating G.711/G.726 fax idle suppression with the remote end across the subnet. The parameter used for negotiating with the remote end is provisioned in Vncs Vp faxIdleSuppressionG711G726.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

dclVsFramerNegotiatedDtmfRegeneration 1.3.6.1.4.1.562.2.4.1.130.4.2.17.1.3
This attribute indicates the result of negotiating DTMF regeneration with the remote end across the subnet. The parameter used for negotiating with the remote end is provisioned in Vncs Vp dtmfRegeneration. If negotiatedDtmfRegeneration is on, DTMF tones received from the link are first converted to digits before being sent to the subnet. When a digit is received from the subnet, its respective DTMF tone is generated before being sent to the link. If negotiatedDtmfRegeneration is off, DTMF tones are transported transparently.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

dclVsFramerNegotiatedV17AsG711G726 1.3.6.1.4.1.562.2.4.1.130.4.2.17.1.4
This attribute indicates how this SwitchedVoiceService negotiates with V.17 fax machines, as determined by negotiation with the remote end across the subnet. The parameter used for negotiating with the remote end is provisioned in Vncs Vp v17EncodedAsG711G726. If negotiatedV17AsG711G726 is no, V.17 fax machines are instructed to use V.29, and V.29 fax traffic sent by fax machines is demodulated and encoded using fax relay. If negotiatedV17AsG711G726 is yes, V.17 fax machines are permitted to use V.17 and V.17 fax traffic sent by fax machines is encoded using G.711 or G.726, at the rates given in negotiatedRates.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

dclVsFramerNegotiatedTandemPassThrough 1.3.6.1.4.1.562.2.4.1.130.4.2.17.1.5
This attribute indicates the result of negotiating tandem pass through with the remote end across the subnet. The parameter used for negotiating with the remote end is provisioned in Vncs Vp tandemPassThrough.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

dclVsFramerFrmToNetworkTable 1.3.6.1.4.1.562.2.4.1.130.4.2.315
This attribute counts the number of frames sent to the network at each encoding rate. Fax relay cells are not included.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsFramerFrmToNetworkEntry

dclVsFramerFrmToNetworkEntry 1.3.6.1.4.1.562.2.4.1.130.4.2.315.1
An entry in the dclVsFramerFrmToNetworkTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsFramerFrmToNetworkEntry  

dclVsFramerFrmToNetworkIndex 1.3.6.1.4.1.562.2.4.1.130.4.2.315.1.1
This variable represents the dclVsFramerFrmToNetworkTable specific index for the dclVsFramerFrmToNetworkTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER n64KbitS(0), n32KbitS(1), n24KbitS(2), n16KbitS(3), n8KbitS(4)  

dclVsFramerFrmToNetworkValue 1.3.6.1.4.1.562.2.4.1.130.4.2.315.1.2
This variable represents an individual value for the dclVsFramerFrmToNetworkTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dclVsFramerFrmFromNetworkTable 1.3.6.1.4.1.562.2.4.1.130.4.2.316
This attribute counts the number of frames received from the network at each encoding rate.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsFramerFrmFromNetworkEntry

dclVsFramerFrmFromNetworkEntry 1.3.6.1.4.1.562.2.4.1.130.4.2.316.1
An entry in the dclVsFramerFrmFromNetworkTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsFramerFrmFromNetworkEntry  

dclVsFramerFrmFromNetworkIndex 1.3.6.1.4.1.562.2.4.1.130.4.2.316.1.1
This variable represents the dclVsFramerFrmFromNetworkTable specific index for the dclVsFramerFrmFromNetworkTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER n64KbitS(0), n32KbitS(1), n24KbitS(2), n16KbitS(3), n8KbitS(4)  

dclVsFramerFrmFromNetworkValue 1.3.6.1.4.1.562.2.4.1.130.4.2.316.1.2
This variable represents an individual value for the dclVsFramerFrmFromNetworkTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dclVsFramerNEncodingTable 1.3.6.1.4.1.562.2.4.1.130.4.2.467
This attribute indicates the results of negotiating audio call encodings for voice, modemFax and fax traffic with the remote end across the subnet. The parameters used for negotiating with the remote end are provisioned in Vncs Vp voiceEncodingChoice and Vncs Vp modemFaxEncodingChoice. voice traffic is all traffic from the start of a call or speech until a 2100 Hz tone or call release. modemFax traffic is all traffic after a 2100 Hz tone but before a fax preamble, speech or call release. fax traffic is all traffic after a fax preamble but before speech or call release. g711 indicates that pulse code modulation (PCM) defined by ITU-T G.711 is the negotiated encoding. g726 indicates that Adaptive Differential Pulse Code Modulation (ADPCM) defined by ITU-T G.726 is the negotiated encoding. g711G726 indicates that pulse code modulation (PCM) defined by ITU-T G.711 and Adaptive Differential Pulse Code Modulation (ADPCM) defined by ITU-T G.726 are both negotiated encodings. If negotiatedEncoding is g711G726, the actual encoding performed can be either G.711 or G.726, depending on network congestion. g728 indicates that Low Delay Coded Excited Linear Predictive Coder (CS-ACELP) defined by ITU-T G.728 is the negotiated encoding. g729 indicates that Conjunctive Structure Algebraic Code Excited Linear Predictive Coder (CS-ACELP) defined by ITU-T G.729 is the negotiated encoding. v29V27Relay indicates that fax relay using ITU-T V.27 or ITU-T V.29 is the negotiated encoding. v17V29V27Relay indicates that fax relay using ITU-T V.17, ITU-T V.27, or ITU-T V.29 is the negotiated encoding. If all negotiated encodings are none, the negotiation of audio call encodings is not complete.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsFramerNEncodingEntry

dclVsFramerNEncodingEntry 1.3.6.1.4.1.562.2.4.1.130.4.2.467.1
An entry in the dclVsFramerNEncodingTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsFramerNEncodingEntry  

dclVsFramerNEncodingIndex 1.3.6.1.4.1.562.2.4.1.130.4.2.467.1.1
This variable represents the dclVsFramerNEncodingTable specific index for the dclVsFramerNEncodingTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER voice(0), modemFax(1), fax(2)  

dclVsFramerNEncodingValue 1.3.6.1.4.1.562.2.4.1.130.4.2.467.1.2
This variable represents an individual value for the dclVsFramerNEncodingTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER g729(1), g728(2), g726(4), g711(5), g711G726(31), v29V27Relay(64), v17V29V27Relay(68), none(255)  

dclVsFramerNRatesTable 1.3.6.1.4.1.562.2.4.1.130.4.2.479
This attribute indicates the results of negotiating minimum and maximum rates for voice, modemFax and fax traffic with the remote end across the subnet. The parameters used for negotiating with the remote end are provisioned in Vncs Vp voiceRates and Vncs Vp modemFaxRates.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsFramerNRatesEntry

dclVsFramerNRatesEntry 1.3.6.1.4.1.562.2.4.1.130.4.2.479.1
An entry in the dclVsFramerNRatesTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsFramerNRatesEntry  

dclVsFramerNRatesTrafficIndex 1.3.6.1.4.1.562.2.4.1.130.4.2.479.1.1
This variable represents the next to last index for the dclVsFramerNRatesTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER voice(0), modemFax(1), fax(2)  

dclVsFramerNRatesRateIndex 1.3.6.1.4.1.562.2.4.1.130.4.2.479.1.2
This variable represents the final index for the dclVsFramerNRatesTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER min(0), max(1)  

dclVsFramerNRatesValue 1.3.6.1.4.1.562.2.4.1.130.4.2.479.1.3
This variable represents an individual value for the dclVsFramerNRatesTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n00(0), n03(1), n12(2), n24(3), n48(4), n72(5), n96(6), n120(7), n144(8), n80(66), n160(67), n240(68), n320(69), n640(70)  

dclVsFramerVfpDebug 1.3.6.1.4.1.562.2.4.1.130.4.2.5
OBJECT IDENTIFIER    

dclVsFramerVfpDebugRowStatusTable 1.3.6.1.4.1.562.2.4.1.130.4.2.5.1
This entry controls the addition and deletion of dclVsFramerVfpDebug components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsFramerVfpDebugRowStatusEntry

dclVsFramerVfpDebugRowStatusEntry 1.3.6.1.4.1.562.2.4.1.130.4.2.5.1.1
A single entry in the table represents a single dclVsFramerVfpDebug component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsFramerVfpDebugRowStatusEntry  

dclVsFramerVfpDebugRowStatus 1.3.6.1.4.1.562.2.4.1.130.4.2.5.1.1.1
This variable is used as the basis for SNMP naming of dclVsFramerVfpDebug components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

dclVsFramerVfpDebugComponentName 1.3.6.1.4.1.562.2.4.1.130.4.2.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dclVsFramerVfpDebugStorageType 1.3.6.1.4.1.562.2.4.1.130.4.2.5.1.1.4
This variable represents the storage type value for the dclVsFramerVfpDebug tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

dclVsFramerVfpDebugIndex 1.3.6.1.4.1.562.2.4.1.130.4.2.5.1.1.10
This variable represents the index for the dclVsFramerVfpDebug tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

dclVsFramerMvpDebug 1.3.6.1.4.1.562.2.4.1.130.4.2.6
OBJECT IDENTIFIER    

dclVsFramerMvpDebugRowStatusTable 1.3.6.1.4.1.562.2.4.1.130.4.2.6.1
This entry controls the addition and deletion of dclVsFramerMvpDebug components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsFramerMvpDebugRowStatusEntry

dclVsFramerMvpDebugRowStatusEntry 1.3.6.1.4.1.562.2.4.1.130.4.2.6.1.1
A single entry in the table represents a single dclVsFramerMvpDebug component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsFramerMvpDebugRowStatusEntry  

dclVsFramerMvpDebugRowStatus 1.3.6.1.4.1.562.2.4.1.130.4.2.6.1.1.1
This variable is used as the basis for SNMP naming of dclVsFramerMvpDebug components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

dclVsFramerMvpDebugComponentName 1.3.6.1.4.1.562.2.4.1.130.4.2.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dclVsFramerMvpDebugStorageType 1.3.6.1.4.1.562.2.4.1.130.4.2.6.1.1.4
This variable represents the storage type value for the dclVsFramerMvpDebug tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

dclVsFramerMvpDebugIndex 1.3.6.1.4.1.562.2.4.1.130.4.2.6.1.1.10
This variable represents the index for the dclVsFramerMvpDebug tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

dclVsFramerPcmCapture 1.3.6.1.4.1.562.2.4.1.130.4.2.7
OBJECT IDENTIFIER    

dclVsFramerPcmCaptureRowStatusTable 1.3.6.1.4.1.562.2.4.1.130.4.2.7.1
This entry controls the addition and deletion of dclVsFramerPcmCapture components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsFramerPcmCaptureRowStatusEntry

dclVsFramerPcmCaptureRowStatusEntry 1.3.6.1.4.1.562.2.4.1.130.4.2.7.1.1
A single entry in the table represents a single dclVsFramerPcmCapture component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsFramerPcmCaptureRowStatusEntry  

dclVsFramerPcmCaptureRowStatus 1.3.6.1.4.1.562.2.4.1.130.4.2.7.1.1.1
This variable is used as the basis for SNMP naming of dclVsFramerPcmCapture components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

dclVsFramerPcmCaptureComponentName 1.3.6.1.4.1.562.2.4.1.130.4.2.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dclVsFramerPcmCaptureStorageType 1.3.6.1.4.1.562.2.4.1.130.4.2.7.1.1.4
This variable represents the storage type value for the dclVsFramerPcmCapture tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

dclVsFramerPcmCaptureIndex 1.3.6.1.4.1.562.2.4.1.130.4.2.7.1.1.10
This variable represents the index for the dclVsFramerPcmCapture tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

dclVsLCo 1.3.6.1.4.1.562.2.4.1.130.4.3
OBJECT IDENTIFIER    

dclVsLCoRowStatusTable 1.3.6.1.4.1.562.2.4.1.130.4.3.1
This entry controls the addition and deletion of dclVsLCo components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsLCoRowStatusEntry

dclVsLCoRowStatusEntry 1.3.6.1.4.1.562.2.4.1.130.4.3.1.1
A single entry in the table represents a single dclVsLCo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsLCoRowStatusEntry  

dclVsLCoRowStatus 1.3.6.1.4.1.562.2.4.1.130.4.3.1.1.1
This variable is used as the basis for SNMP naming of dclVsLCo components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

dclVsLCoComponentName 1.3.6.1.4.1.562.2.4.1.130.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dclVsLCoStorageType 1.3.6.1.4.1.562.2.4.1.130.4.3.1.1.4
This variable represents the storage type value for the dclVsLCo tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

dclVsLCoIndex 1.3.6.1.4.1.562.2.4.1.130.4.3.1.1.10
This variable represents the index for the dclVsLCo tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

dclVsLCoPathDataTable 1.3.6.1.4.1.562.2.4.1.130.4.3.10
This group contains all operational attributes for the path oriented LCo.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsLCoPathDataEntry

dclVsLCoPathDataEntry 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1
An entry in the dclVsLCoPathDataTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsLCoPathDataEntry  

dclVsLCoState 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.1
This attribute reflects the current state of the connection. The pathDown state indicates a connection that has no remote end provisioned or the application has not yet signalled for a path. The selectingRoute state occurs when a request has been sent to route selector and it has not yet responded. The connectingState occurs while a path is being established. The pathUp state is the normal operational state of a path. The pathDownRetrying state indicates a path that attempted route selection but received no route and is now waiting to retry route selection again.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pathDown(0), selectingRoute(1), connecting(2), pathUp(3), pathDownRetrying(4)  

dclVsLCoOverrideRemoteName 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.2
If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this attribute and then lock/unlock the service component which will result in this new overrideRemoteName being used as if it had been provisioned into the PLC remoteName. The advantage of this attribute is that the connection's remoteName can be changed immediately without having to 'activate prov' but the disadvantage is that the overrideRemoteName is not permanent and if the card or switch is reset the override will be lost.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..40)  

dclVsLCoEnd 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.3
This attribute identifies whether this is the calling or called end of the path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER calling(0), called(1)  

dclVsLCoCostMetric 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.4
This attribute gives the route's total cost metric. It is calculated as the sum of the cost metric of all trunks in the path at the time the connection was established. The cost metric of a trunk is defined by the trunkCost attribute of the Trunk component. The costMetric for an LCo that is originated and terminated on the same module is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dclVsLCoDelayMetric 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.5
This attribute gives the total delay of the route as the one way delay for a 512 byte packet. It is calculated as the sum of the delays of all trunks in the path stored in topology at the time the connection was established. The delay for an LCo that is originated and terminated on the same module is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100000  

dclVsLCoRoundTripDelay 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.6
This attribute contains the time taken for a packet (cell) of 44 bytes to be transmitted to the remote LCo and return to this LCo. The number reported is given in milliseconds to the nearest millisecond. A value of one millisecond is reported if the time is less than 1 millisecond even though the delay may be less than 1 Millisecond when the LCo is originated and terminated on the same module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..200000  

dclVsLCoSetupPriority 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.7
This attribute gives the priority at which the current path is established. Zero is the highest priority and four is the lowest. The holdingPriority, a complementary attribute of this component, indicates the priority a path maintains once it is established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4  

dclVsLCoHoldingPriority 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.8
This attribute gives the priority at which a path holds its current path once the path is established. Zero is the highest priority and four is the lowest. The setupPriority, a complementary attribute, indicates the priority of a path at establishment time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4  

dclVsLCoRequiredTxBandwidth 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.9
This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of the trunks of its route. This attribute represents the bandwidth for traffic outgoing to the remote end point. The originating end of the connection determines this value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

dclVsLCoRequiredRxBandwidth 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.10
This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of trunks of its route. This attribute represents the bandwidth for traffic incoming from the remote end point. The originating end of the connection determines this value
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

dclVsLCoRequiredTrafficType 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.11
This operational attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and the path can transmit only one of them. The originating end of the connection determines the type. These are arbitrary designations for traffic type. The voice, data and video traffic types are defined, and five other arbitrary traffic types can be defined by the network administration. This attribute is used in the route selection process to restrict the route to trunks that support this traffic type. The supportedTrafficType trunk attribute lists all the types of traffic allowed on the trunk. For example, if requiredTrafficType is specified as trafficType1 then only trunks that include trafficType1 in supportedTrafficType, will be candidates for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER voice(0), data(1), video(2), trafficType1(3), trafficType2(4), trafficType3(5), trafficType4(6), trafficType5(7)  

dclVsLCoPermittedTrunkTypes 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.12
This operational attribute lists up to eight types of trunk that can be used on the route. The originating end of the connection determines the types. The terrestrial and satellite trunk types have been defined, leaving six remaining arbitrary types that can be defined by the network administration. The trunk's type is indicated in the trunkType attribute of the Trunk component. When selecting a route, PORS only chooses trunks whose trunkType are in the permittedTrunkTypes for the path. Description of bits: terrestrial(0) satellite(1) trunkType1(2) trunkType2(3) trunkType3(4) trunkType4(5) trunkType5(6) trunkType6(7)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

dclVsLCoRequiredSecurity 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.13
This attribute indicates the required minimum level of security of the trunks on the route. Zero represents the most secure and seven represents the least secure. The trunk's security is indicated by the trunkSecurity attribute of the Trunk component, and has values identical in range and meaning to the requiredSecurity attribute. PORS ensures that any route selected does not contain a trunk whose trunkSecurity attribute is numerically greater than the requiredSecurity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

dclVsLCoRequiredCustomerParameter 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.14
This attribute indicates the allowed customer defined parameter of the trunks on the route.The originating end of the connection determines the customer defined parameter. Its value, a number from zero to seven, is chosen by a network administration to have a meaning specific to their network, thus allowing them to customize the use of their trunks. A complementary trunk attribute, customerParameter, also has a value from zero to seven. The route selection process does not consider trunks whose customerParameter is greater than the requiredCustomerParameter of the path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

dclVsLCoEmissionPriority 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.15
This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. The originating end of the connection selects the emissionPriority. EmissionPriority of zero indicates the highest emission priority, while two indicates the lowest emission priority. Packets with a higher emissionPriority (or numerically less) are serviced and sent out before the packets of lower emissionPriority (or numerically higher).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2  

dclVsLCoDiscardPriority 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.16
This attribute indicates the importance of the packets on the path.The originating end of the connection sets discardPriority. One is used for paths carrying the most important traffic, and three is used for paths carrying the least important traffic. Packets with lower discardPriority(numerically lower) are discarded after packets with a higher discardPriority(numerically higher).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..3  

dclVsLCoPathType 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.17
This attribute indicates whether the path for this PLC was determined automatically or by static provisioning. Normal pathTypes are selected automatically by Route Selector.The other pathTypes are both manual pathTypes where the operator must specify, through provisioning, a static route termed the manualPath. A manual pathType connection is nearly identical to a normal path type connection with the exception that the route is pre-provisioned. For a manual pathType, bandwidth reservations are respected along the path exactly as in a normal path. The last type, the forced pathType, is also a manual path but regardless of the bandwidth available the route is granted provided the trunks are operational and there are sufficient Logical Channels (LChs). The forced pathType could result in over committing the reserved bandwidth allowed on a trunk. A better way to achieve the effects of a forced pathType is to use a manual pathType with setupPriority = 0 and holdingPriority = 0. In this manner the path will reserve correct bandwidth and it will bump other paths if required while not being bumped itself.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), manual(1), forced(2)  

dclVsLCoRetryCount 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.18
This attribute is the count of the number of times the path chosen during route selection could not be instantiated. This count should be three or below if the network is performing adequately. A high value indicates that the route selection is often performed using an out-of-date view of available network bandwidth and/or topology. This attribute will only increase at the calling end of the connection. This attribute is reset each time a path reconnects and stops counting when it reaches its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

dclVsLCoPathFailureCount 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.19
This attribute is the count of the number of times the path has successfully connected. It is set to zero the first time the path is up. If a path fails anytime after connecting this count will be incremented when the path is up again. Failed route requests do not count in this statistic. See retryCount above. This attribute stops counting at its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dclVsLCoReasonForNoRoute 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.20
This attribute is the route selection's reasonForNoRoute and provides a brief reason for which a route was not selected. The reasons are essentially self-explanatory. Perhaps two reasons for no route require some explanation. The reason unknownRemoteNodeName is issued when the remote node name is not in the topological database. The reason plcAttributesNotMet is issued when there is no network connectivity at a level specified by the PLC attributes. This reason is also issued when there is no physical connectivity between two end nodes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), destinationNameTooLong(1), destinationNotSpecified(2), unknownDestinationName(3), incorrectDestination(4), incorrectDestinationEndPoint(5), unknownSource(6), unknownDestination(7), sameNode(8), routeCostTooMuch(9), routesDelayTooLong(10), attributesNotMet(11), anError(12), attributeProfileProblem(13), manualPathIndexProblem(14)  

dclVsLCoLastTearDownReason 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.21
This attribute reflects the last tear down reason for a connection (LCo). In many cases this displays the reason for a momentary service interruption. This attribute applies to the last path failure only. If a path is no longer up, this may give an indication to the reason that the path has failed. In many cases an alarm will also be generated with more specific information. The following is a brief description of the reasons: none - This path has no information for the teardown this is typical of a path provisioned with no remoteName that has not been up. normalShutDown - This path has gone down due to normal call termination. insufficientTxLcOrBandwidth - At present there is either no available bandwidth or logical channel numbers available on one or more of the trunks for this path in the transmit direction. insufficientRxLcOrBandwidth - At present there is either no available bandwidth or logical channel numbers available on one or more of the trunks for this path in the receive direction. trunkFailure- A trunk on the path has failed or has gone down due to a provisioning change of a critical attribute. trunkCardFailure- A trunk FP card has failed along the path. accessCardFailure- The FP on which the peer access service was running has failed. operatorForced- The path has terminated due to the operator locking a trunk along the path. lostLcnClash- The path has terminated because the PA's at both ends of an intermediate trunk have allocated the same LC to different calls. When this happens both calls must go down and then try to come up again a fraction of a second later (effectively ensuring that they will now be assigned different LC's). It is normal to get the odd clash especially when the PA's usedLC is approaching the PA's maxLC. networkCongestion - The path has failed due to control information being lost and not recoverable. trunkNotFound - Occurs on a manual path usually. Check for trunks not up or names provisioned incorrectly. farEndNotFound - The far end is not provisioned or is not up. Check remote Name. wrongModuleReached - This may occur on a manual path. Check provisioning for correct trunk and service names. For a normal path, the network Topology may be changing check remoteName. farEndBusy - The far end has been reached but it is busy. Check remoteName and remote end provisioning. callLoopedBack - This LCo is provisioned to call itself. Re- provision since this is invalid. unknownReason - The failure was not resolved. farEndNotReady - The remote end was reached but the connection was refused due to the remote end not being enabled. remoteNameMismatch - The remote end has alarmed and rejected this setup due to remoteName provisioning. serviceTypeMismatch - The remote Service Type does not match this service type. Check provisioning. reconnectFromFarEnd - The remote end re-established this connection. Check the remote end lastTearDownReason to determine the real reason. bumped - Another call bumped this path from a trunk to get bandwidth (or an LC) which it required to come up. This other path had a higher setupPriority than this path's holdingPriority hence it was allowed to steal the bandwidth (or LC) from this path. optimized - This call has been rerouted due to the optimization feature. The call is still active this just indicates why the path changed. trunkOrFarEndDidNotSupportMode - This call was unable to complete because a mode required by the service was not supported by one of the trunks the route went through or by the far end service it connected to. Currently the only mode that this applies to is the map/mux mode on TRUNK PA ATM component. Map mode was required by the application (CES/FrAtm etc.) but was not available on the TRUNK PA ATM component through which the call was routed or the far end CES/FrAtm component did not specify the same mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), normalShutDown(1), insufficientTxLcOrBandwidth(2), insufficientRxLcOrBandwidth(3), trunkFailure(4), trunkCardFailure(5), operatorForced(6), lostLcnClash(7), networkCongestion(8), trunkNotFound(9), farEndNotFound(10), wrongModuleReached(11), farEndBusy(12), callLoopedBack(13), unknownReason(14), farEndNotReady(15), remoteNameMismatch(16), serviceTypeMismatch(17), reconnectFromFarEnd(18), bumped(19), accessCardFailure(20), optimized(21), overrideRemoteName(22), trunkOrFarEndDidNotSupportMode(23)  

dclVsLCoPathFailureAction 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.22
This attribute displays whether the application is set to tolerate momentary interruption of a path while a new path is selected. If disconnectConnection is displayed, the application is informed as soon as possible about a failure by disconnection. If the attribute displays reRoutePath, the path may attempt an immediate reroute, provided the failure is a recoverable failure. If rerouting fails the application is informed of the failure. With this option set to reRoutePath the LCo may wait up to 30 seconds before informing the service of complete disconnection in order to allow both ends to attempt to reconnect. Note that if PLC components are different at both ends only the calling end is allowed to reconnect. All pathTypes respect this attribute. Also on a manualPath with both ends provisioned with independent paths (at least with respect to the failure) this option will have the desired effect that the path is rerouted without complete disconnection at both ends
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disconnectConnection(0), reRoutePath(1)  

dclVsLCoBumpPreference 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.23
This attribute specifies when bumping will occur during route selection process. Bumping may occur when necessary or always. It will be necessary for a connection to bump if there is not enough resources for the connection to be established and these resources are occupied by a connection whose setupPriority is lower (numerically higher) than the connection's setupPriority. A connection may also always bump in order to obtain the best route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bumpWhenNecessary(0), bumpToObtainBestRoute(1)  

dclVsLCoOptimization 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.24
This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS component. Every path is as optimal as it can be when it is established, but as network traffic patterns and configurations change this path may no longer be as optimal as it could be. The PORS connection manager on a module requests circuits to optimize at the optimization interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

dclVsLCoPathUpDateTime 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.25
This is the time stamp when the current path was established or reestablished.
Status: mandatory Access: read-only
OBJECT-TYPE    
  EnterpriseDateAndTime Size(0|19)  

dclVsLCoStatsTable 1.3.6.1.4.1.562.2.4.1.130.4.3.11
This group contains the operational statistics attributes for the path oriented LCo.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsLCoStatsEntry

dclVsLCoStatsEntry 1.3.6.1.4.1.562.2.4.1.130.4.3.11.1
An entry in the dclVsLCoStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsLCoStatsEntry  

dclVsLCoPktsToNetwork 1.3.6.1.4.1.562.2.4.1.130.4.3.11.1.1
This attribute counts the number of packets transmitted to the network over this Logical Connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

dclVsLCoBytesToNetwork 1.3.6.1.4.1.562.2.4.1.130.4.3.11.1.2
This attribute counts the number of bytes sent to the network over this Logical Connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

dclVsLCoPktsFromNetwork 1.3.6.1.4.1.562.2.4.1.130.4.3.11.1.3
This attribute counts the number of packets received from the remote LCo via the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

dclVsLCoBytesFromNetwork 1.3.6.1.4.1.562.2.4.1.130.4.3.11.1.4
This attribute counts the number of bytes received from the remote LCo via the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

dclVsLCoPathTable 1.3.6.1.4.1.562.2.4.1.130.4.3.264
This attribute contains the trunk component names over which the path has been instantiated and the remote end point name terminating the path.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DclVsLCoPathEntry

dclVsLCoPathEntry 1.3.6.1.4.1.562.2.4.1.130.4.3.264.1
An entry in the dclVsLCoPathTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DclVsLCoPathEntry  

dclVsLCoPathValue 1.3.6.1.4.1.562.2.4.1.130.4.3.264.1.1
This variable represents both the value and the index for the dclVsLCoPathTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..40)  

dcmeGroup 1.3.6.1.4.1.562.2.4.2.134.1
OBJECT IDENTIFIER    

dcmeGroupBE 1.3.6.1.4.1.562.2.4.2.134.1.5
OBJECT IDENTIFIER    

dcmeGroupBE01 1.3.6.1.4.1.562.2.4.2.134.1.5.2
OBJECT IDENTIFIER    

dcmeGroupBE01A 1.3.6.1.4.1.562.2.4.2.134.1.5.2.2
OBJECT IDENTIFIER    

dcmeCapabilities 1.3.6.1.4.1.562.2.4.2.134.3
OBJECT IDENTIFIER    

dcmeCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.134.3.5
OBJECT IDENTIFIER    

dcmeCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.134.3.5.2
OBJECT IDENTIFIER    

dcmeCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.134.3.5.2.2
OBJECT IDENTIFIER