Nortel-Magellan-Passport-BaseRoutingMIB

File: Nortel-Magellan-Passport-BaseRoutingMIB.mib (74291 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE components passportMIBs
Counter32 RowPointer DisplayString
StorageType RowStatus Gauge32
Integer32 Unsigned32 NonReplicated
FixedPoint1 AsciiStringIndex DigitString

Defined Types

RtgRowStatusEntry  
SEQUENCE    
  rtgRowStatus RowStatus
  rtgComponentName DisplayString
  rtgStorageType StorageType
  rtgIndex NonReplicated

RtgProvEntry  
SEQUENCE    
  rtgTandemTraffic INTEGER

RtgSplittingRegionIdsEntry  
SEQUENCE    
  rtgSplittingRegionIdsValue Integer32
  rtgSplittingRegionIdsRowStatus RowStatus

RtgTopRowStatusEntry  
SEQUENCE    
  rtgTopRowStatus RowStatus
  rtgTopComponentName DisplayString
  rtgTopStorageType StorageType
  rtgTopIndex NonReplicated

RtgTopStatsEntry  
SEQUENCE    
  rtgTopControlPktRx Counter32
  rtgTopControlBytesRx Counter32
  rtgTopControlPktTx Counter32
  rtgTopControlBytesTx Counter32

RtgTopNodeRowStatusEntry  
SEQUENCE    
  rtgTopNodeRowStatus RowStatus
  rtgTopNodeComponentName DisplayString
  rtgTopNodeStorageType StorageType
  rtgTopNodeIndex AsciiStringIndex

RtgTopNodeOperEntry  
SEQUENCE    
  rtgTopNodeNodeId Unsigned32

RtgTopNodeLgRowStatusEntry  
SEQUENCE    
  rtgTopNodeLgRowStatus RowStatus
  rtgTopNodeLgComponentName DisplayString
  rtgTopNodeLgStorageType StorageType
  rtgTopNodeLgIndex AsciiStringIndex

RtgTopNodeLgOperEntry  
SEQUENCE    
  rtgTopNodeLgDelayMetric Unsigned32
  rtgTopNodeLgTputMetric Unsigned32

RtgTopNodeLgLnnEntry  
SEQUENCE    
  rtgTopNodeLgLnnValue Integer32

RtgTopNodeLgTrkObjRowStatusEntry  
SEQUENCE    
  rtgTopNodeLgTrkObjRowStatus RowStatus
  rtgTopNodeLgTrkObjComponentName DisplayString
  rtgTopNodeLgTrkObjStorageType StorageType
  rtgTopNodeLgTrkObjIndex Integer32

RtgTopNodeLgTrkObjOperEntry  
SEQUENCE    
  rtgTopNodeLgTrkObjMaxReservableBwOut Gauge32
  rtgTopNodeLgTrkObjTrunkCost Unsigned32
  rtgTopNodeLgTrkObjTrunkDelay Unsigned32
  rtgTopNodeLgTrkObjTrunkSecurity Unsigned32
  rtgTopNodeLgTrkObjSupportedTrafficTypes OCTET STRING
  rtgTopNodeLgTrkObjTrunkType INTEGER
  rtgTopNodeLgTrkObjCustomerParameter Unsigned32
  rtgTopNodeLgTrkObjFarEndTrmLkInstance Unsigned32

RtgTopNodeLgTrkObjUnresEntry  
SEQUENCE    
  rtgTopNodeLgTrkObjUnresSetupPriorityIndex INTEGER
  rtgTopNodeLgTrkObjUnresUnreservedBwPartsIndex Integer32
  rtgTopNodeLgTrkObjUnresValue Unsigned32

TrmRowStatusEntry  
SEQUENCE    
  trmRowStatus RowStatus
  trmComponentName DisplayString
  trmStorageType StorageType
  trmIndex NonReplicated

TrmLkRowStatusEntry  
SEQUENCE    
  trmLkRowStatus RowStatus
  trmLkComponentName DisplayString
  trmLkStorageType StorageType
  trmLkIndex Integer32

TrmLkOperEntry  
SEQUENCE    
  trmLkStatus INTEGER
  trmLkThroughput Gauge32
  trmLkDelay Gauge32
  trmLkMaxTxUnit Unsigned32
  trmLkLinkComponentName RowPointer
  trmLkDelayUsec FixedPoint1

TrmLkFwdStatsEntry  
SEQUENCE    
  trmLkFciSet Counter32
  trmLkOverflowAttempts Counter32
  trmLkPathOverflowAttempts Counter32

TrmLkDiscardCongestedEntry  
SEQUENCE    
  trmLkDiscardCongestedIndex INTEGER
  trmLkDiscardCongestedValue Counter32

TrmLgRowStatusEntry  
SEQUENCE    
  trmLgRowStatus RowStatus
  trmLgComponentName DisplayString
  trmLgStorageType StorageType
  trmLgIndex AsciiStringIndex

TrmLgLkRowStatusEntry  
SEQUENCE    
  trmLgLkRowStatus RowStatus
  trmLgLkComponentName DisplayString
  trmLgLkStorageType StorageType
  trmLgLkIndex Integer32

TrmLgLkOperEntry  
SEQUENCE    
  trmLgLkStatus INTEGER
  trmLgLkThroughput Gauge32
  trmLgLkDelay Gauge32
  trmLgLkMaxTxUnit Unsigned32
  trmLgLkLinkComponentName RowPointer
  trmLgLkDelayUsec FixedPoint1

TrmLgLkFwdStatsEntry  
SEQUENCE    
  trmLgLkFciSet Counter32
  trmLgLkOverflowAttempts Counter32
  trmLgLkPathOverflowAttempts Counter32

TrmLgLkDiscardCongestedEntry  
SEQUENCE    
  trmLgLkDiscardCongestedIndex INTEGER
  trmLgLkDiscardCongestedValue Counter32

TrmLgLNNRowStatusEntry  
SEQUENCE    
  trmLgLNNRowStatus RowStatus
  trmLgLNNComponentName DisplayString
  trmLgLNNStorageType StorageType
  trmLgLNNIndex Integer32

TrmLgLNNOperEntry  
SEQUENCE    
  trmLgLNNLinkType INTEGER
  trmLgLNNAddressPlanComponentName RowPointer

NpiRowStatusEntry  
SEQUENCE    
  npiRowStatus RowStatus
  npiComponentName DisplayString
  npiStorageType StorageType
  npiIndex INTEGER

NpiStatsEntry  
SEQUENCE    
  npiTotalDnas Unsigned32

NpiDnaRowStatusEntry  
SEQUENCE    
  npiDnaRowStatus RowStatus
  npiDnaComponentName DisplayString
  npiDnaStorageType StorageType
  npiDnaIndex DigitString

NpiDnaInfoEntry  
SEQUENCE    
  npiDnaDestinationName RowPointer

Defined Values

baseRoutingMIB 1.3.6.1.4.1.562.2.4.2.18
OBJECT IDENTIFIER    

rtg 1.3.6.1.4.1.562.2.4.1.40
OBJECT IDENTIFIER    

rtgRowStatusTable 1.3.6.1.4.1.562.2.4.1.40.1
This entry controls the addition and deletion of rtg components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RtgRowStatusEntry

rtgRowStatusEntry 1.3.6.1.4.1.562.2.4.1.40.1.1
A single entry in the table represents a single rtg component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RtgRowStatusEntry  

rtgRowStatus 1.3.6.1.4.1.562.2.4.1.40.1.1.1
This variable is used as the basis for SNMP naming of rtg components. These components can be added.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

rtgComponentName 1.3.6.1.4.1.562.2.4.1.40.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rtgStorageType 1.3.6.1.4.1.562.2.4.1.40.1.1.4
This variable represents the storage type value for the rtg tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

rtgIndex 1.3.6.1.4.1.562.2.4.1.40.1.1.10
This variable represents the index for the rtg tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

rtgProvTable 1.3.6.1.4.1.562.2.4.1.40.12
This group contains the provisioning data for the routing system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RtgProvEntry

rtgProvEntry 1.3.6.1.4.1.562.2.4.1.40.12.1
An entry in the rtgProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RtgProvEntry  

rtgTandemTraffic 1.3.6.1.4.1.562.2.4.1.40.12.1.1
This attribute specifies whether tandem traffic is permitted through the node. Tandem traffic is traffic which arrives at the node on a trunk and leaves the node on a trunk. Traffic to or from a gateway (internal or external) is not affected by the setting of this attribute. The default value of this attribute is allowed, which permits tandem traffic to be routed through the node. When this attribute is set to denied, DPN, VNS, and PORS traffic are not permitted to tandem through the node. Changing this attribute has no effect on PORS calls which were set up before the change. These calls can be manually forced to reroute using the new setting by clearing the calls or locking the trunks on which they are routed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER allowed(0), denied(1)  

rtgSplittingRegionIdsTable 1.3.6.1.4.1.562.2.4.1.40.407
This attribute is used only when splitting or merging existing topology regions. It specifies which topology regions are in a migration status. A node will only exchange topological information with a connected node under the following conditions: (i) the nodes belong to the same topology region, (ii) one of the nodes is provisioned with the default regionId of 0, (iii) the connected node's splittingRegionIds attribute is provisioned to contain the local node's regionId value and the local node's splittingRegionIds is also provisioned to contain the connected node's regionId value when both two nodes' regionIds are different and non-zero. When this attribute is used during migration of regions, values for the attribute are normally the old and new regionIds for the node. Use of this attribute makes it possible to migrate existing topology regions in the following cases: (i) splitting a topology region into two without isolating a node, (ii) merging two different topology regions into one without introducing an extra topological barrier. The attribute should be cleaned when all migration activities are complete. At this point, the region boundary will take effect.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RtgSplittingRegionIdsEntry

rtgSplittingRegionIdsEntry 1.3.6.1.4.1.562.2.4.1.40.407.1
An entry in the rtgSplittingRegionIdsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RtgSplittingRegionIdsEntry  

rtgSplittingRegionIdsValue 1.3.6.1.4.1.562.2.4.1.40.407.1.1
This variable represents both the value and the index for the rtgSplittingRegionIdsTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Integer32 1..126  

rtgSplittingRegionIdsRowStatus 1.3.6.1.4.1.562.2.4.1.40.407.1.2
This variable is used to control the addition and deletion of individual values of the rtgSplittingRegionIdsTable.
Status: mandatory Access: write-only
OBJECT-TYPE    
  RowStatus  

rtgTop 1.3.6.1.4.1.562.2.4.1.40.5
OBJECT IDENTIFIER    

rtgTopRowStatusTable 1.3.6.1.4.1.562.2.4.1.40.5.1
This entry controls the addition and deletion of rtgTop components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RtgTopRowStatusEntry

rtgTopRowStatusEntry 1.3.6.1.4.1.562.2.4.1.40.5.1.1
A single entry in the table represents a single rtgTop component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RtgTopRowStatusEntry  

rtgTopRowStatus 1.3.6.1.4.1.562.2.4.1.40.5.1.1.1
This variable is used as the basis for SNMP naming of rtgTop components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

rtgTopComponentName 1.3.6.1.4.1.562.2.4.1.40.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rtgTopStorageType 1.3.6.1.4.1.562.2.4.1.40.5.1.1.4
This variable represents the storage type value for the rtgTop tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

rtgTopIndex 1.3.6.1.4.1.562.2.4.1.40.5.1.1.10
This variable represents the index for the rtgTop tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

rtgTopStatsTable 1.3.6.1.4.1.562.2.4.1.40.5.11
Rtg Top Statistics This group contains operational data stored and maintained by this component for recording statistics of Passport routing control packets which have been sent or received by Topology.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RtgTopStatsEntry

rtgTopStatsEntry 1.3.6.1.4.1.562.2.4.1.40.5.11.1
An entry in the rtgTopStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RtgTopStatsEntry  

rtgTopControlPktRx 1.3.6.1.4.1.562.2.4.1.40.5.11.1.1
This attribute shows the total number of topology routing control packets which have been received by this node from other Passport nodes in the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rtgTopControlBytesRx 1.3.6.1.4.1.562.2.4.1.40.5.11.1.2
This attribute shows the total number of topology routing control packet bytes received by this node from other Passport nodes in the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rtgTopControlPktTx 1.3.6.1.4.1.562.2.4.1.40.5.11.1.3
This attribute shows the total number of topology routing control packets which have been sent by this node to other Passport nodes in the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rtgTopControlBytesTx 1.3.6.1.4.1.562.2.4.1.40.5.11.1.4
This attribute shows the total number of topology routing control packet bytes sent by this node to other Passport nodes in the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rtgTopNode 1.3.6.1.4.1.562.2.4.1.40.5.2
OBJECT IDENTIFIER    

rtgTopNodeRowStatusTable 1.3.6.1.4.1.562.2.4.1.40.5.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rtgTopNode components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RtgTopNodeRowStatusEntry

rtgTopNodeRowStatusEntry 1.3.6.1.4.1.562.2.4.1.40.5.2.1.1
A single entry in the table represents a single rtgTopNode component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RtgTopNodeRowStatusEntry  

rtgTopNodeRowStatus 1.3.6.1.4.1.562.2.4.1.40.5.2.1.1.1
This variable is used as the basis for SNMP naming of rtgTopNode components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

rtgTopNodeComponentName 1.3.6.1.4.1.562.2.4.1.40.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rtgTopNodeStorageType 1.3.6.1.4.1.562.2.4.1.40.5.2.1.1.4
This variable represents the storage type value for the rtgTopNode tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

rtgTopNodeIndex 1.3.6.1.4.1.562.2.4.1.40.5.2.1.1.10
This variable represents the index for the rtgTopNode tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..12)  

rtgTopNodeOperTable 1.3.6.1.4.1.562.2.4.1.40.5.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Rtg Top Node/ Operational This group contains operational data about each node in the Passport network and its connectivity to its neighbours.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RtgTopNodeOperEntry

rtgTopNodeOperEntry 1.3.6.1.4.1.562.2.4.1.40.5.2.10.1
An entry in the rtgTopNodeOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RtgTopNodeOperEntry  

rtgTopNodeNodeId 1.3.6.1.4.1.562.2.4.1.40.5.2.10.1.1
The nodeId is a number that uniquely identifies the Node component instance in the Passport network. It is the identifier used in the routing control packets sent by this node to other Passport nodes in the network. The nodeId, for each node in the network, is learned from the Passport routing protocol packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4095  

rtgTopNodeLg 1.3.6.1.4.1.562.2.4.1.40.5.2.2
OBJECT IDENTIFIER    

rtgTopNodeLgRowStatusTable 1.3.6.1.4.1.562.2.4.1.40.5.2.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rtgTopNodeLg components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RtgTopNodeLgRowStatusEntry

rtgTopNodeLgRowStatusEntry 1.3.6.1.4.1.562.2.4.1.40.5.2.2.1.1
A single entry in the table represents a single rtgTopNodeLg component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RtgTopNodeLgRowStatusEntry  

rtgTopNodeLgRowStatus 1.3.6.1.4.1.562.2.4.1.40.5.2.2.1.1.1
This variable is used as the basis for SNMP naming of rtgTopNodeLg components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

rtgTopNodeLgComponentName 1.3.6.1.4.1.562.2.4.1.40.5.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rtgTopNodeLgStorageType 1.3.6.1.4.1.562.2.4.1.40.5.2.2.1.1.4
This variable represents the storage type value for the rtgTopNodeLg tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

rtgTopNodeLgIndex 1.3.6.1.4.1.562.2.4.1.40.5.2.2.1.1.10
This variable represents the index for the rtgTopNodeLg tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..12)  

rtgTopNodeLgOperTable 1.3.6.1.4.1.562.2.4.1.40.5.2.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Rtg Top Node/ LinkGroup/ Operational This group contains the operational data stored and maintained by TrunkGroup component for each trunk group attached to a node in the Passport network.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RtgTopNodeLgOperEntry

rtgTopNodeLgOperEntry 1.3.6.1.4.1.562.2.4.1.40.5.2.2.10.1
An entry in the rtgTopNodeLgOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RtgTopNodeLgOperEntry  

rtgTopNodeLgDelayMetric 1.3.6.1.4.1.562.2.4.1.40.5.2.2.10.1.1
This attribute specifies the outbound cost to forward packets across the trunk group for a delay class of service. It represents the trunk in the trunk group with the lowest round trip delay. A low outbound cost is preferable to a higher value as it is associated with higher speed facilities. A metric value of 2147483647 means that the trunk group is unusable for the delay class of service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2147483647  

rtgTopNodeLgTputMetric 1.3.6.1.4.1.562.2.4.1.40.5.2.2.10.1.2
This attribute specifies the outbound cost to forward packets across the trunk group for a throughput class of service. It is computed from the combined speed of each link in the trunk group. A low outbound cost is preferable to a higher value as it is associated with higher speed facilities. A metric value of 2147483647 means that the trunk group is unusable for the throughput class of service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2147483647  

rtgTopNodeLgLnnTable 1.3.6.1.4.1.562.2.4.1.40.5.2.2.235
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute is a list of integers which specify the logical network numbers supported by the trunk group. Each of these numbers corresponds with a particular instance of network protocol supported on this switch. LNN 0 is present on all trunks by default to allow Passport control traffic on the trunk.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RtgTopNodeLgLnnEntry

rtgTopNodeLgLnnEntry 1.3.6.1.4.1.562.2.4.1.40.5.2.2.235.1
An entry in the rtgTopNodeLgLnnTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RtgTopNodeLgLnnEntry  

rtgTopNodeLgLnnValue 1.3.6.1.4.1.562.2.4.1.40.5.2.2.235.1.1
This variable represents both the value and the index for the rtgTopNodeLgLnnTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Integer32 0..2047  

rtgTopNodeLgTrkObj 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2
OBJECT IDENTIFIER    

rtgTopNodeLgTrkObjRowStatusTable 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rtgTopNodeLgTrkObj components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RtgTopNodeLgTrkObjRowStatusEntry

rtgTopNodeLgTrkObjRowStatusEntry 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1.1
A single entry in the table represents a single rtgTopNodeLgTrkObj component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RtgTopNodeLgTrkObjRowStatusEntry  

rtgTopNodeLgTrkObjRowStatus 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1.1.1
This variable is used as the basis for SNMP naming of rtgTopNodeLgTrkObj components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

rtgTopNodeLgTrkObjComponentName 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rtgTopNodeLgTrkObjStorageType 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1.1.4
This variable represents the storage type value for the rtgTopNodeLgTrkObj tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

rtgTopNodeLgTrkObjIndex 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1.1.10
This variable represents the index for the rtgTopNodeLgTrkObj tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1023  

rtgTopNodeLgTrkObjOperTable 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Rtg Top Node/ LinkGroup/ Trunk/ Operational This group contains the operational data stored and maintained by TplPorTrunk component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RtgTopNodeLgTrkObjOperEntry

rtgTopNodeLgTrkObjOperEntry 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1
An entry in the rtgTopNodeLgTrkObjOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RtgTopNodeLgTrkObjOperEntry  

rtgTopNodeLgTrkObjMaxReservableBwOut 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.1
This attribute displays trunk bandwidth which can be used for reservations on behalf of connections requiring path oriented routing. This bandwidth is displayed in bit/s and has been calculated by concerned trunk path administrator from the trunk bandwidth and from the percentage of trunk bandwidth provisioned for reservations by PORS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

rtgTopNodeLgTrkObjTrunkCost 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.2
This attribute displays trunk cost metric provisioned as trunkCost attribute of a concerned trunk path administrator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

rtgTopNodeLgTrkObjTrunkDelay 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.3
This attribute displays one-directional trunk delay measured by trunk during staging. This is half (rounded down to an integer) of delay displayable by attribute of ID aTrmLinkDelay_c.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

rtgTopNodeLgTrkObjTrunkSecurity 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.4
This attribute displays trunk security metric provisioned as trunkSecurity attribute of a concerned trunk path administrator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

rtgTopNodeLgTrkObjSupportedTrafficTypes 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.5
This attribute indicates the type of traffic that can be transmitted on the trunk. There are eight(8) possible traffic types, and the trunk can transmit all of them if desired. The voice, data and video traffic types are defined, and five(5) other traffic types can be defined in concerned trunk path administrator. This attribute is used in the route selection process to limit the route to trunks that support the traffic to be carried by the path. Description of bits: voice(0) data(1) video(2) trafficType1(3) trafficType2(4) trafficType3(5) trafficType4(6) trafficType5(7)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

rtgTopNodeLgTrkObjTrunkType 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.6
This attribute lists the type of the trunk. There can be up to eight(8) types of trunks. The terrestrial and satellite trunk types have been defined, leaving six(6) remaining types that can be defined by the network administration. The set of allowed trunk types for a path is indicated in the permittedTrunkType attribute of the PLC. When selecting a route, PORS only chooses trunks whose PA trunkType are in the permittedTrunkTypes set of the path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER terrestrial(0), satellite(1), trunkType1(2), trunkType2(3), trunkType3(4), trunkType4(5), trunkType5(6), trunkType6(7)  

rtgTopNodeLgTrkObjCustomerParameter 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.7
This attribute indicates the customer defined parameter for the trunk. Its value, a number from zero(0) to seven(7), is chosen by a network administration to have a meaning specific to their network, thus allowing them to customize the use of their trunks. A complementary PLC attribute, requiredCustomerParameter, also has a value from zero(0) to seven(7). The Route Selector does not consider trunks whose PA customerParameter is greater than the requiredCustomParameter of the path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

rtgTopNodeLgTrkObjFarEndTrmLkInstance 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.8
This attribute indicates identification of the corresponding trunk providing the reverse direction of transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1023  

rtgTopNodeLgTrkObjUnresTable 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.234
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute displays a table. In the first row there are setup priorities. In the second row there are numerators of parts of unreserved bandwidth corresponding to setup priority 0 (first column) through 4 (fifth column). The denominator is 255.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RtgTopNodeLgTrkObjUnresEntry

rtgTopNodeLgTrkObjUnresEntry 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.234.1
An entry in the rtgTopNodeLgTrkObjUnresTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RtgTopNodeLgTrkObjUnresEntry  

rtgTopNodeLgTrkObjUnresSetupPriorityIndex 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.234.1.1
This variable represents the next to last index for the rtgTopNodeLgTrkObjUnresTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER bwPartOver255(0)  

rtgTopNodeLgTrkObjUnresUnreservedBwPartsIndex 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.234.1.2
This variable represents the final index for the rtgTopNodeLgTrkObjUnresTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4  

rtgTopNodeLgTrkObjUnresValue 1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.234.1.3
This variable represents an individual value for the rtgTopNodeLgTrkObjUnresTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

trm 1.3.6.1.4.1.562.2.4.1.41
OBJECT IDENTIFIER    

trmRowStatusTable 1.3.6.1.4.1.562.2.4.1.41.1
This entry controls the addition and deletion of trm components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrmRowStatusEntry

trmRowStatusEntry 1.3.6.1.4.1.562.2.4.1.41.1.1
A single entry in the table represents a single trm component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrmRowStatusEntry  

trmRowStatus 1.3.6.1.4.1.562.2.4.1.41.1.1.1
This variable is used as the basis for SNMP naming of trm components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

trmComponentName 1.3.6.1.4.1.562.2.4.1.41.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

trmStorageType 1.3.6.1.4.1.562.2.4.1.41.1.1.4
This variable represents the storage type value for the trm tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

trmIndex 1.3.6.1.4.1.562.2.4.1.41.1.1.10
This variable represents the index for the trm tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

trmLk 1.3.6.1.4.1.562.2.4.1.41.2
OBJECT IDENTIFIER    

trmLkRowStatusTable 1.3.6.1.4.1.562.2.4.1.41.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of trmLk components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrmLkRowStatusEntry

trmLkRowStatusEntry 1.3.6.1.4.1.562.2.4.1.41.2.1.1
A single entry in the table represents a single trmLk component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrmLkRowStatusEntry  

trmLkRowStatus 1.3.6.1.4.1.562.2.4.1.41.2.1.1.1
This variable is used as the basis for SNMP naming of trmLk components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

trmLkComponentName 1.3.6.1.4.1.562.2.4.1.41.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

trmLkStorageType 1.3.6.1.4.1.562.2.4.1.41.2.1.1.4
This variable represents the storage type value for the trmLk tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

trmLkIndex 1.3.6.1.4.1.562.2.4.1.41.2.1.1.10
This variable represents the index for the trmLk tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1023  

trmLkOperTable 1.3.6.1.4.1.562.2.4.1.41.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Trm Lk/ Operational This group of attributes is used to list links. These links are all registered with Transport Resource Manager. They have a status which reflects the current view of the link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrmLkOperEntry

trmLkOperEntry 1.3.6.1.4.1.562.2.4.1.41.2.10.1
An entry in the trmLkOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrmLkOperEntry  

trmLkStatus 1.3.6.1.4.1.562.2.4.1.41.2.10.1.1
This attribute indicates if the inactive link is disabled, joining, waiting to join, or in standby mode. inactive - The link is known to TRM but is not active. This can mean that it is disabled, or has not yet started to join. joining - The link has requested to join the routing systems. online- The link is active and has joined one or more routing systems.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), joining(2), online(3)  

trmLkThroughput 1.3.6.1.4.1.562.2.4.1.41.2.10.1.2
This attribute indicates the throughput of the link in kbit/s. This value represents a nominal bandwidth available for connectionless traffic, after the maximum reserved for path-oriented traffic has been subtracted from trunk bandwidth. If a trunk speed override is specified, it is used instead. The 'throughput' value can be exceeded by connectionless traffic whenever path-oriented traffic is not using it's reserved bandwidth.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 1..640000000  

trmLkDelay 1.3.6.1.4.1.562.2.4.1.41.2.10.1.3
This is the round trip delay of the link in milliseconds. This value represents a nominal delay for connectionless traffic. Connectionless traffic is biased away from trunks carrying path- oriented traffic by increasing this value. The value of this attribute is a function of the percentage of reserved path-oriented bandwidth and takes a maximum value of 1500 msec for 100% path-oriented trunks. If an override delay is specified, it will be used instead.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Gauge32 1..1500  

trmLkMaxTxUnit 1.3.6.1.4.1.562.2.4.1.41.2.10.1.4
This attribute indicates the maximum data unit in bytes of this link. It represents the maximum frame length (including user data and routing headers) that can be sent on the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

trmLkLinkComponentName 1.3.6.1.4.1.562.2.4.1.41.2.10.1.5
This attribute indicates the link's component name. A link is either a trunk or a gateway to another module. The component name may be used to obtain additional information from the link system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

trmLkDelayUsec 1.3.6.1.4.1.562.2.4.1.41.2.10.1.6
This attribute indicates the round trip delay of the link in milliseconds. This value represents a nominal delay for connectionless traffic. Connectionless traffic is biased away from trunks carrying path-oriented traffic by increasing this value. The value of this attribute is a function of the percentage of reserved path-oriented bandwidth and takes a maximum value of 1500 msec for 100% path-oriented trunks. If a delay override is specified, it will be used instead.
Status: mandatory Access: read-only
OBJECT-TYPE    
  FixedPoint1 10..15000  

trmLkFwdStatsTable 1.3.6.1.4.1.562.2.4.1.41.2.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group of attributes is used to display egress statistics collected by packet forwarding on this link. The statistics can be used to monitor congestion conditions and packet discards on a link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrmLkFwdStatsEntry

trmLkFwdStatsEntry 1.3.6.1.4.1.562.2.4.1.41.2.11.1
An entry in the trmLkFwdStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrmLkFwdStatsEntry  

trmLkFciSet 1.3.6.1.4.1.562.2.4.1.41.2.11.1.1
This attribute counts the packets whose FCI bits are set by packet forwarding due to congestion on this link, and when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. This counter wraps around to zero when the maximum value is reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

trmLkOverflowAttempts 1.3.6.1.4.1.562.2.4.1.41.2.11.1.2
This attribute counts the number of times DPRS packet forwarding attempts to overflow packets to another link in a link group due to congestion on this link. It is used only when the attribute forwardingPolicy in component rtg dpn is set to the value loadspreading. This counter wraps around to zero when the maximum value is reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

trmLkPathOverflowAttempts 1.3.6.1.4.1.562.2.4.1.41.2.11.1.3
This attribute counts the number of times DPRS packet forwarding attempts to overflow packets to another link group due to congestion on the link group of this link. This counter wraps around to zero when the maximum value is reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

trmLkDiscardCongestedTable 1.3.6.1.4.1.562.2.4.1.41.2.280
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute counts the packets that have been discarded by packet forwarding due to congestion on this link and when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. This attribute is a vector with three entries. Each entry corresponds to a discard priority of the packet. The first entry represents the discard count of packets with discard priority 1, the second entry discard priority 2, and the third entry discard priority 3. Each entry (counter) wraps around to zero when the maximum value is reached.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrmLkDiscardCongestedEntry

trmLkDiscardCongestedEntry 1.3.6.1.4.1.562.2.4.1.41.2.280.1
An entry in the trmLkDiscardCongestedTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrmLkDiscardCongestedEntry  

trmLkDiscardCongestedIndex 1.3.6.1.4.1.562.2.4.1.41.2.280.1.1
This variable represents the trmLkDiscardCongestedTable specific index for the trmLkDiscardCongestedTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER discardPriority1(0), discardPriority2(1), discardPriority3(2)  

trmLkDiscardCongestedValue 1.3.6.1.4.1.562.2.4.1.41.2.280.1.2
This variable represents an individual value for the trmLkDiscardCongestedTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

trmLg 1.3.6.1.4.1.562.2.4.1.41.3
OBJECT IDENTIFIER    

trmLgRowStatusTable 1.3.6.1.4.1.562.2.4.1.41.3.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of trmLg components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrmLgRowStatusEntry

trmLgRowStatusEntry 1.3.6.1.4.1.562.2.4.1.41.3.1.1
A single entry in the table represents a single trmLg component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrmLgRowStatusEntry  

trmLgRowStatus 1.3.6.1.4.1.562.2.4.1.41.3.1.1.1
This variable is used as the basis for SNMP naming of trmLg components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

trmLgComponentName 1.3.6.1.4.1.562.2.4.1.41.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

trmLgStorageType 1.3.6.1.4.1.562.2.4.1.41.3.1.1.4
This variable represents the storage type value for the trmLg tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

trmLgIndex 1.3.6.1.4.1.562.2.4.1.41.3.1.1.10
This variable represents the index for the trmLg tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..12)  

trmLgLk 1.3.6.1.4.1.562.2.4.1.41.3.2
OBJECT IDENTIFIER    

trmLgLkRowStatusTable 1.3.6.1.4.1.562.2.4.1.41.3.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of trmLgLk components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrmLgLkRowStatusEntry

trmLgLkRowStatusEntry 1.3.6.1.4.1.562.2.4.1.41.3.2.1.1
A single entry in the table represents a single trmLgLk component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrmLgLkRowStatusEntry  

trmLgLkRowStatus 1.3.6.1.4.1.562.2.4.1.41.3.2.1.1.1
This variable is used as the basis for SNMP naming of trmLgLk components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

trmLgLkComponentName 1.3.6.1.4.1.562.2.4.1.41.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

trmLgLkStorageType 1.3.6.1.4.1.562.2.4.1.41.3.2.1.1.4
This variable represents the storage type value for the trmLgLk tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

trmLgLkIndex 1.3.6.1.4.1.562.2.4.1.41.3.2.1.1.10
This variable represents the index for the trmLgLk tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1023  

trmLgLkOperTable 1.3.6.1.4.1.562.2.4.1.41.3.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Trm Lk/ Operational This group of attributes is used to list links. These links are all registered with Transport Resource Manager. They have a status which reflects the current view of the link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrmLgLkOperEntry

trmLgLkOperEntry 1.3.6.1.4.1.562.2.4.1.41.3.2.10.1
An entry in the trmLgLkOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrmLgLkOperEntry  

trmLgLkStatus 1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.1
This attribute indicates if the inactive link is disabled, joining, waiting to join, or in standby mode. inactive - The link is known to TRM but is not active. This can mean that it is disabled, or has not yet started to join. joining - The link has requested to join the routing systems. online- The link is active and has joined one or more routing systems.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), joining(2), online(3)  

trmLgLkThroughput 1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.2
This attribute indicates the throughput of the link in kbit/s. This value represents a nominal bandwidth available for connectionless traffic, after the maximum reserved for path-oriented traffic has been subtracted from trunk bandwidth. If a trunk speed override is specified, it is used instead. The 'throughput' value can be exceeded by connectionless traffic whenever path-oriented traffic is not using it's reserved bandwidth.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 1..640000000  

trmLgLkDelay 1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.3
This is the round trip delay of the link in milliseconds. This value represents a nominal delay for connectionless traffic. Connectionless traffic is biased away from trunks carrying path- oriented traffic by increasing this value. The value of this attribute is a function of the percentage of reserved path-oriented bandwidth and takes a maximum value of 1500 msec for 100% path-oriented trunks. If an override delay is specified, it will be used instead.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Gauge32 1..1500  

trmLgLkMaxTxUnit 1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.4
This attribute indicates the maximum data unit in bytes of this link. It represents the maximum frame length (including user data and routing headers) that can be sent on the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

trmLgLkLinkComponentName 1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.5
This attribute indicates the link's component name. A link is either a trunk or a gateway to another module. The component name may be used to obtain additional information from the link system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

trmLgLkDelayUsec 1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.6
This attribute indicates the round trip delay of the link in milliseconds. This value represents a nominal delay for connectionless traffic. Connectionless traffic is biased away from trunks carrying path-oriented traffic by increasing this value. The value of this attribute is a function of the percentage of reserved path-oriented bandwidth and takes a maximum value of 1500 msec for 100% path-oriented trunks. If a delay override is specified, it will be used instead.
Status: mandatory Access: read-only
OBJECT-TYPE    
  FixedPoint1 10..15000  

trmLgLkFwdStatsTable 1.3.6.1.4.1.562.2.4.1.41.3.2.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group of attributes is used to display egress statistics collected by packet forwarding on this link. The statistics can be used to monitor congestion conditions and packet discards on a link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrmLgLkFwdStatsEntry

trmLgLkFwdStatsEntry 1.3.6.1.4.1.562.2.4.1.41.3.2.11.1
An entry in the trmLgLkFwdStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrmLgLkFwdStatsEntry  

trmLgLkFciSet 1.3.6.1.4.1.562.2.4.1.41.3.2.11.1.1
This attribute counts the packets whose FCI bits are set by packet forwarding due to congestion on this link, and when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. This counter wraps around to zero when the maximum value is reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

trmLgLkOverflowAttempts 1.3.6.1.4.1.562.2.4.1.41.3.2.11.1.2
This attribute counts the number of times DPRS packet forwarding attempts to overflow packets to another link in a link group due to congestion on this link. It is used only when the attribute forwardingPolicy in component rtg dpn is set to the value loadspreading. This counter wraps around to zero when the maximum value is reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

trmLgLkPathOverflowAttempts 1.3.6.1.4.1.562.2.4.1.41.3.2.11.1.3
This attribute counts the number of times DPRS packet forwarding attempts to overflow packets to another link group due to congestion on the link group of this link. This counter wraps around to zero when the maximum value is reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

trmLgLkDiscardCongestedTable 1.3.6.1.4.1.562.2.4.1.41.3.2.280
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute counts the packets that have been discarded by packet forwarding due to congestion on this link and when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. This attribute is a vector with three entries. Each entry corresponds to a discard priority of the packet. The first entry represents the discard count of packets with discard priority 1, the second entry discard priority 2, and the third entry discard priority 3. Each entry (counter) wraps around to zero when the maximum value is reached.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrmLgLkDiscardCongestedEntry

trmLgLkDiscardCongestedEntry 1.3.6.1.4.1.562.2.4.1.41.3.2.280.1
An entry in the trmLgLkDiscardCongestedTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrmLgLkDiscardCongestedEntry  

trmLgLkDiscardCongestedIndex 1.3.6.1.4.1.562.2.4.1.41.3.2.280.1.1
This variable represents the trmLgLkDiscardCongestedTable specific index for the trmLgLkDiscardCongestedTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER discardPriority1(0), discardPriority2(1), discardPriority3(2)  

trmLgLkDiscardCongestedValue 1.3.6.1.4.1.562.2.4.1.41.3.2.280.1.2
This variable represents an individual value for the trmLgLkDiscardCongestedTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

trmLgLNN 1.3.6.1.4.1.562.2.4.1.41.3.3
OBJECT IDENTIFIER    

trmLgLNNRowStatusTable 1.3.6.1.4.1.562.2.4.1.41.3.3.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of trmLgLNN components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrmLgLNNRowStatusEntry

trmLgLNNRowStatusEntry 1.3.6.1.4.1.562.2.4.1.41.3.3.1.1
A single entry in the table represents a single trmLgLNN component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrmLgLNNRowStatusEntry  

trmLgLNNRowStatus 1.3.6.1.4.1.562.2.4.1.41.3.3.1.1.1
This variable is used as the basis for SNMP naming of trmLgLNN components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

trmLgLNNComponentName 1.3.6.1.4.1.562.2.4.1.41.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

trmLgLNNStorageType 1.3.6.1.4.1.562.2.4.1.41.3.3.1.1.4
This variable represents the storage type value for the trmLgLNN tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

trmLgLNNIndex 1.3.6.1.4.1.562.2.4.1.41.3.3.1.1.10
This variable represents the index for the trmLgLNN tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2047  

trmLgLNNOperTable 1.3.6.1.4.1.562.2.4.1.41.3.3.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Trm Lg/ LNN/ Operational This group of attributes is the information associated with an address plan.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrmLgLNNOperEntry

trmLgLNNOperEntry 1.3.6.1.4.1.562.2.4.1.41.3.3.10.1
An entry in the trmLgLNNOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrmLgLNNOperEntry  

trmLgLNNLinkType 1.3.6.1.4.1.562.2.4.1.41.3.3.10.1.1
This attribute indicates how the LNN is transported over the link group. It can be one of three types: trunk - the LNN is supported by Topology over a Passport to Passport link internal gateway - the LNN is supported by an address plan (but not Topology) over a Passport to Passport link external gateway - the LNN is supported by an address plan (but not Topology) over a Passport to non-Passport link
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER trunk(0), internalGateway(1), externalGateway(2)  

trmLgLNNAddressPlanComponentName 1.3.6.1.4.1.562.2.4.1.41.3.3.10.1.2
This attribute indicates the component name of the address plan which owns the logical network number of this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

npi 1.3.6.1.4.1.562.2.4.1.43
OBJECT IDENTIFIER    

npiRowStatusTable 1.3.6.1.4.1.562.2.4.1.43.1
This entry controls the addition and deletion of npi components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NpiRowStatusEntry

npiRowStatusEntry 1.3.6.1.4.1.562.2.4.1.43.1.1
A single entry in the table represents a single npi component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NpiRowStatusEntry  

npiRowStatus 1.3.6.1.4.1.562.2.4.1.43.1.1.1
This variable is used as the basis for SNMP naming of npi components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

npiComponentName 1.3.6.1.4.1.562.2.4.1.43.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

npiStorageType 1.3.6.1.4.1.562.2.4.1.43.1.1.4
This variable represents the storage type value for the npi tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

npiIndex 1.3.6.1.4.1.562.2.4.1.43.1.1.10
This variable represents the index for the npi tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

npiStatsTable 1.3.6.1.4.1.562.2.4.1.43.10
Npi/ Statistics This group of attributes contains the statistics kept for a particular numbering plan indicator. The only statistic present is the total number of DNAs provisioned for the numbering plan.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NpiStatsEntry

npiStatsEntry 1.3.6.1.4.1.562.2.4.1.43.10.1
An entry in the npiStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NpiStatsEntry  

npiTotalDnas 1.3.6.1.4.1.562.2.4.1.43.10.1.1
This attribute holds the total number of Dnas that are in the numbering plan. If this attribute is displayed in provisioning mode, the number includes the Dnas that have been added/deleted in that provisioning session, otherwise the number only includes the Dnas that have been activated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

npiDna 1.3.6.1.4.1.562.2.4.1.43.2
OBJECT IDENTIFIER    

npiDnaRowStatusTable 1.3.6.1.4.1.562.2.4.1.43.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of npiDna components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NpiDnaRowStatusEntry

npiDnaRowStatusEntry 1.3.6.1.4.1.562.2.4.1.43.2.1.1
A single entry in the table represents a single npiDna component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NpiDnaRowStatusEntry  

npiDnaRowStatus 1.3.6.1.4.1.562.2.4.1.43.2.1.1.1
This variable is used as the basis for SNMP naming of npiDna components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

npiDnaComponentName 1.3.6.1.4.1.562.2.4.1.43.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

npiDnaStorageType 1.3.6.1.4.1.562.2.4.1.43.2.1.1.4
This variable represents the storage type value for the npiDna tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

npiDnaIndex 1.3.6.1.4.1.562.2.4.1.43.2.1.1.10
This variable represents the index for the npiDna tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DigitString Size(1..15)  

npiDnaInfoTable 1.3.6.1.4.1.562.2.4.1.43.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Npi/ Dna/ Information This group of attributes contains the attributes for a DNA in the numbering plan.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NpiDnaInfoEntry

npiDnaInfoEntry 1.3.6.1.4.1.562.2.4.1.43.2.10.1
An entry in the npiDnaInfoTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NpiDnaInfoEntry  

npiDnaDestinationName 1.3.6.1.4.1.562.2.4.1.43.2.10.1.1
This attribute holds the Component Name of the application to which the DNA belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

baseRoutingGroup 1.3.6.1.4.1.562.2.4.2.18.1
OBJECT IDENTIFIER    

baseRoutingGroupBE 1.3.6.1.4.1.562.2.4.2.18.1.5
OBJECT IDENTIFIER    

baseRoutingGroupBE00 1.3.6.1.4.1.562.2.4.2.18.1.5.1
OBJECT IDENTIFIER    

baseRoutingGroupBE00A 1.3.6.1.4.1.562.2.4.2.18.1.5.1.2
OBJECT IDENTIFIER    

baseRoutingCapabilities 1.3.6.1.4.1.562.2.4.2.18.3
OBJECT IDENTIFIER    

baseRoutingCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.18.3.5
OBJECT IDENTIFIER    

baseRoutingCapabilitiesBE00 1.3.6.1.4.1.562.2.4.2.18.3.5.1
OBJECT IDENTIFIER    

baseRoutingCapabilitiesBE00A 1.3.6.1.4.1.562.2.4.2.18.3.5.1.2
OBJECT IDENTIFIER