Nortel-Magellan-Passport-AtmPnniMIB

File: Nortel-Magellan-Passport-AtmPnniMIB.mib (201326 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-AtmCoreMIB

Imported symbols

OBJECT-TYPE passportMIBs Counter32
DisplayString StorageType RowStatus
Gauge32 Integer32 Unsigned32
Hex NonReplicated HexString
FixedPoint1 AsciiStringIndex atmIfVptIndex
atmIfVpt atmIfIndex atmIf

Defined Types

AtmIfVptPnniRowStatusEntry  
SEQUENCE    
  atmIfVptPnniRowStatus RowStatus
  atmIfVptPnniComponentName DisplayString
  atmIfVptPnniStorageType StorageType
  atmIfVptPnniIndex NonReplicated

AtmIfVptPnniProvEntry  
SEQUENCE    
  atmIfVptPnniSoftPvcRetryPeriod Unsigned32
  atmIfVptPnniSoftPvpAndPvcRetryPeriod Unsigned32
  atmIfVptPnniSoftPvpAndPvcHoldOffTime Unsigned32

AtmIfVptPnniAdminWeightsEntry  
SEQUENCE    
  atmIfVptPnniCbrWeight Unsigned32
  atmIfVptPnniRtVbrWeight Unsigned32
  atmIfVptPnniNrtVbrWeight Unsigned32
  atmIfVptPnniUbrWeight Unsigned32

AtmIfVptPnniAcctOptEntry  
SEQUENCE    
  atmIfVptPnniAccountCollection OCTET STRING
  atmIfVptPnniAccountConnectionType INTEGER
  atmIfVptPnniAccountClass Unsigned32
  atmIfVptPnniServiceExchange Unsigned32

AtmIfVptPnniOperationalEntry  
SEQUENCE    
  atmIfVptPnniPortId Unsigned32

AtmIfVptPnniVProvEntry  
SEQUENCE    
  atmIfVptPnniVpci Unsigned32

AtmIfVptPnniSigRowStatusEntry  
SEQUENCE    
  atmIfVptPnniSigRowStatus RowStatus
  atmIfVptPnniSigComponentName DisplayString
  atmIfVptPnniSigStorageType StorageType
  atmIfVptPnniSigIndex NonReplicated

AtmIfVptPnniSigProvEntry  
SEQUENCE    
  atmIfVptPnniSigVci Unsigned32
  atmIfVptPnniSigAddressConversion INTEGER

AtmIfVptPnniSigStateEntry  
SEQUENCE    
  atmIfVptPnniSigAdminState INTEGER
  atmIfVptPnniSigOperationalState INTEGER
  atmIfVptPnniSigUsageState INTEGER

AtmIfVptPnniSigOperEntry  
SEQUENCE    
  atmIfVptPnniSigLastTxCauseCode Unsigned32
  atmIfVptPnniSigLastTxDiagCode Hex
  atmIfVptPnniSigLastRxCauseCode Unsigned32
  atmIfVptPnniSigLastRxDiagCode Hex

AtmIfVptPnniSigStatsEntry  
SEQUENCE    
  atmIfVptPnniSigCurrentConnections Counter32
  atmIfVptPnniSigPeakConnections Gauge32
  atmIfVptPnniSigSuccessfulConnections Counter32
  atmIfVptPnniSigFailedConnections Counter32
  atmIfVptPnniSigTxPdus Counter32
  atmIfVptPnniSigRxPdus Counter32
  atmIfVptPnniSigCurrentPmpConnections Gauge32
  atmIfVptPnniSigPeakPmpConnections Gauge32
  atmIfVptPnniSigSuccessfulPmpConnections Counter32
  atmIfVptPnniSigFailedPmpConnections Counter32
  atmIfVptPnniSigNewCurrentConnections Gauge32

AtmIfVptPnniSigVcdRowStatusEntry  
SEQUENCE    
  atmIfVptPnniSigVcdRowStatus RowStatus
  atmIfVptPnniSigVcdComponentName DisplayString
  atmIfVptPnniSigVcdStorageType StorageType
  atmIfVptPnniSigVcdIndex NonReplicated

AtmIfVptPnniSigVcdProvEntry  
SEQUENCE    
  atmIfVptPnniSigVcdTrafficDescType INTEGER
  atmIfVptPnniSigVcdAtmServiceCategory INTEGER
  atmIfVptPnniSigVcdQosClass INTEGER
  atmIfVptPnniSigVcdTrafficShaping INTEGER
  atmIfVptPnniSigVcdUnshapedTransmitQueueing INTEGER
  atmIfVptPnniSigVcdUsageParameterControl INTEGER

AtmIfVptPnniSigVcdTdpEntry  
SEQUENCE    
  atmIfVptPnniSigVcdTdpIndex Integer32
  atmIfVptPnniSigVcdTdpValue Unsigned32

AtmIfVptPnniRccRowStatusEntry  
SEQUENCE    
  atmIfVptPnniRccRowStatus RowStatus
  atmIfVptPnniRccComponentName DisplayString
  atmIfVptPnniRccStorageType StorageType
  atmIfVptPnniRccIndex NonReplicated

AtmIfVptPnniRccProvEntry  
SEQUENCE    
  atmIfVptPnniRccVci Unsigned32

AtmIfVptPnniRccHlParmsEntry  
SEQUENCE    
  atmIfVptPnniRccHelloHoldDown FixedPoint1
  atmIfVptPnniRccHelloInterval Unsigned32
  atmIfVptPnniRccHelloInactivityFactor Unsigned32

AtmIfVptPnniRccStateEntry  
SEQUENCE    
  atmIfVptPnniRccAdminState INTEGER
  atmIfVptPnniRccOperationalState INTEGER
  atmIfVptPnniRccUsageState INTEGER

AtmIfVptPnniRccOperEntry  
SEQUENCE    
  atmIfVptPnniRccType INTEGER
  atmIfVptPnniRccNegotiatedVersion INTEGER
  atmIfVptPnniRccHelloState INTEGER
  atmIfVptPnniRccRemoteNodeId HexString
  atmIfVptPnniRccRemotePortId Unsigned32

AtmIfVptPnniRccStatsEntry  
SEQUENCE    
  atmIfVptPnniRccHelloPacketsRx Counter32
  atmIfVptPnniRccHelloPacketsTx Counter32
  atmIfVptPnniRccMismatchedHelloPacketsRx Counter32
  atmIfVptPnniRccBadHelloPacketsRx Counter32

AtmIfVptPnniRccVcdRowStatusEntry  
SEQUENCE    
  atmIfVptPnniRccVcdRowStatus RowStatus
  atmIfVptPnniRccVcdComponentName DisplayString
  atmIfVptPnniRccVcdStorageType StorageType
  atmIfVptPnniRccVcdIndex NonReplicated

AtmIfVptPnniRccVcdProvEntry  
SEQUENCE    
  atmIfVptPnniRccVcdTrafficDescType INTEGER
  atmIfVptPnniRccVcdAtmServiceCategory INTEGER
  atmIfVptPnniRccVcdQosClass INTEGER
  atmIfVptPnniRccVcdTrafficShaping INTEGER
  atmIfVptPnniRccVcdUnshapedTransmitQueueing INTEGER
  atmIfVptPnniRccVcdUsageParameterControl INTEGER

AtmIfVptPnniRccVcdTdpEntry  
SEQUENCE    
  atmIfVptPnniRccVcdTdpIndex Integer32
  atmIfVptPnniRccVcdTdpValue Unsigned32

AtmIfVptPnniAddrRowStatusEntry  
SEQUENCE    
  atmIfVptPnniAddrRowStatus RowStatus
  atmIfVptPnniAddrComponentName DisplayString
  atmIfVptPnniAddrStorageType StorageType
  atmIfVptPnniAddrAddressIndex AsciiStringIndex
  atmIfVptPnniAddrAddressTypeIndex INTEGER

AtmIfVptPnniAddrOperEntry  
SEQUENCE    
  atmIfVptPnniAddrScope INTEGER
  atmIfVptPnniAddrReachability INTEGER

AtmIfVptPnniAddrTermSPRowStatusEntry  
SEQUENCE    
  atmIfVptPnniAddrTermSPRowStatus RowStatus
  atmIfVptPnniAddrTermSPComponentName DisplayString
  atmIfVptPnniAddrTermSPStorageType StorageType
  atmIfVptPnniAddrTermSPIndex NonReplicated

AtmIfVptPnniAddrPnniInfoRowStatusEntry  
SEQUENCE    
  atmIfVptPnniAddrPnniInfoRowStatus RowStatus
  atmIfVptPnniAddrPnniInfoComponentName DisplayString
  atmIfVptPnniAddrPnniInfoStorageType StorageType
  atmIfVptPnniAddrPnniInfoIndex NonReplicated

AtmIfVptPnniAddrPnniInfoProvEntry  
SEQUENCE    
  atmIfVptPnniAddrPnniInfoScope INTEGER
  atmIfVptPnniAddrPnniInfoReachability INTEGER

AtmIfPnniRowStatusEntry  
SEQUENCE    
  atmIfPnniRowStatus RowStatus
  atmIfPnniComponentName DisplayString
  atmIfPnniStorageType StorageType
  atmIfPnniIndex NonReplicated

AtmIfPnniProvEntry  
SEQUENCE    
  atmIfPnniSoftPvcRetryPeriod Unsigned32
  atmIfPnniSoftPvpAndPvcRetryPeriod Unsigned32
  atmIfPnniSoftPvpAndPvcHoldOffTime Unsigned32

AtmIfPnniAdminWeightsEntry  
SEQUENCE    
  atmIfPnniCbrWeight Unsigned32
  atmIfPnniRtVbrWeight Unsigned32
  atmIfPnniNrtVbrWeight Unsigned32
  atmIfPnniUbrWeight Unsigned32

AtmIfPnniAcctOptEntry  
SEQUENCE    
  atmIfPnniAccountCollection OCTET STRING
  atmIfPnniAccountConnectionType INTEGER
  atmIfPnniAccountClass Unsigned32
  atmIfPnniServiceExchange Unsigned32

AtmIfPnniOperationalEntry  
SEQUENCE    
  atmIfPnniPortId Unsigned32

AtmIfPnniSigRowStatusEntry  
SEQUENCE    
  atmIfPnniSigRowStatus RowStatus
  atmIfPnniSigComponentName DisplayString
  atmIfPnniSigStorageType StorageType
  atmIfPnniSigIndex NonReplicated

AtmIfPnniSigProvEntry  
SEQUENCE    
  atmIfPnniSigVci Unsigned32
  atmIfPnniSigAddressConversion INTEGER

AtmIfPnniSigStateEntry  
SEQUENCE    
  atmIfPnniSigAdminState INTEGER
  atmIfPnniSigOperationalState INTEGER
  atmIfPnniSigUsageState INTEGER

AtmIfPnniSigOperEntry  
SEQUENCE    
  atmIfPnniSigLastTxCauseCode Unsigned32
  atmIfPnniSigLastTxDiagCode Hex
  atmIfPnniSigLastRxCauseCode Unsigned32
  atmIfPnniSigLastRxDiagCode Hex

AtmIfPnniSigStatsEntry  
SEQUENCE    
  atmIfPnniSigCurrentConnections Counter32
  atmIfPnniSigPeakConnections Gauge32
  atmIfPnniSigSuccessfulConnections Counter32
  atmIfPnniSigFailedConnections Counter32
  atmIfPnniSigTxPdus Counter32
  atmIfPnniSigRxPdus Counter32
  atmIfPnniSigCurrentPmpConnections Gauge32
  atmIfPnniSigPeakPmpConnections Gauge32
  atmIfPnniSigSuccessfulPmpConnections Counter32
  atmIfPnniSigFailedPmpConnections Counter32
  atmIfPnniSigNewCurrentConnections Gauge32

AtmIfPnniSigVcdRowStatusEntry  
SEQUENCE    
  atmIfPnniSigVcdRowStatus RowStatus
  atmIfPnniSigVcdComponentName DisplayString
  atmIfPnniSigVcdStorageType StorageType
  atmIfPnniSigVcdIndex NonReplicated

AtmIfPnniSigVcdProvEntry  
SEQUENCE    
  atmIfPnniSigVcdTrafficDescType INTEGER
  atmIfPnniSigVcdAtmServiceCategory INTEGER
  atmIfPnniSigVcdQosClass INTEGER
  atmIfPnniSigVcdTrafficShaping INTEGER
  atmIfPnniSigVcdUnshapedTransmitQueueing INTEGER
  atmIfPnniSigVcdUsageParameterControl INTEGER

AtmIfPnniSigVcdTdpEntry  
SEQUENCE    
  atmIfPnniSigVcdTdpIndex Integer32
  atmIfPnniSigVcdTdpValue Unsigned32

AtmIfPnniRccRowStatusEntry  
SEQUENCE    
  atmIfPnniRccRowStatus RowStatus
  atmIfPnniRccComponentName DisplayString
  atmIfPnniRccStorageType StorageType
  atmIfPnniRccIndex NonReplicated

AtmIfPnniRccProvEntry  
SEQUENCE    
  atmIfPnniRccVci Unsigned32

AtmIfPnniRccHlParmsEntry  
SEQUENCE    
  atmIfPnniRccHelloHoldDown FixedPoint1
  atmIfPnniRccHelloInterval Unsigned32
  atmIfPnniRccHelloInactivityFactor Unsigned32

AtmIfPnniRccStateEntry  
SEQUENCE    
  atmIfPnniRccAdminState INTEGER
  atmIfPnniRccOperationalState INTEGER
  atmIfPnniRccUsageState INTEGER

AtmIfPnniRccOperEntry  
SEQUENCE    
  atmIfPnniRccType INTEGER
  atmIfPnniRccNegotiatedVersion INTEGER
  atmIfPnniRccHelloState INTEGER
  atmIfPnniRccRemoteNodeId HexString
  atmIfPnniRccRemotePortId Unsigned32

AtmIfPnniRccStatsEntry  
SEQUENCE    
  atmIfPnniRccHelloPacketsRx Counter32
  atmIfPnniRccHelloPacketsTx Counter32
  atmIfPnniRccMismatchedHelloPacketsRx Counter32
  atmIfPnniRccBadHelloPacketsRx Counter32

AtmIfPnniRccVcdRowStatusEntry  
SEQUENCE    
  atmIfPnniRccVcdRowStatus RowStatus
  atmIfPnniRccVcdComponentName DisplayString
  atmIfPnniRccVcdStorageType StorageType
  atmIfPnniRccVcdIndex NonReplicated

AtmIfPnniRccVcdProvEntry  
SEQUENCE    
  atmIfPnniRccVcdTrafficDescType INTEGER
  atmIfPnniRccVcdAtmServiceCategory INTEGER
  atmIfPnniRccVcdQosClass INTEGER
  atmIfPnniRccVcdTrafficShaping INTEGER
  atmIfPnniRccVcdUnshapedTransmitQueueing INTEGER
  atmIfPnniRccVcdUsageParameterControl INTEGER

AtmIfPnniRccVcdTdpEntry  
SEQUENCE    
  atmIfPnniRccVcdTdpIndex Integer32
  atmIfPnniRccVcdTdpValue Unsigned32

AtmIfPnniAddrRowStatusEntry  
SEQUENCE    
  atmIfPnniAddrRowStatus RowStatus
  atmIfPnniAddrComponentName DisplayString
  atmIfPnniAddrStorageType StorageType
  atmIfPnniAddrAddressIndex AsciiStringIndex
  atmIfPnniAddrAddressTypeIndex INTEGER

AtmIfPnniAddrOperEntry  
SEQUENCE    
  atmIfPnniAddrScope INTEGER
  atmIfPnniAddrReachability INTEGER

AtmIfPnniAddrTermSPRowStatusEntry  
SEQUENCE    
  atmIfPnniAddrTermSPRowStatus RowStatus
  atmIfPnniAddrTermSPComponentName DisplayString
  atmIfPnniAddrTermSPStorageType StorageType
  atmIfPnniAddrTermSPIndex NonReplicated

AtmIfPnniAddrPnniInfoRowStatusEntry  
SEQUENCE    
  atmIfPnniAddrPnniInfoRowStatus RowStatus
  atmIfPnniAddrPnniInfoComponentName DisplayString
  atmIfPnniAddrPnniInfoStorageType StorageType
  atmIfPnniAddrPnniInfoIndex NonReplicated

AtmIfPnniAddrPnniInfoProvEntry  
SEQUENCE    
  atmIfPnniAddrPnniInfoScope INTEGER
  atmIfPnniAddrPnniInfoReachability INTEGER

Defined Values

atmPnniMIB 1.3.6.1.4.1.562.2.4.2.72
OBJECT IDENTIFIER    

atmIfVptPnni 1.3.6.1.4.1.562.2.4.1.114.9.7
OBJECT IDENTIFIER    

atmIfVptPnniRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.7.1
This entry controls the addition and deletion of atmIfVptPnni components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRowStatusEntry

atmIfVptPnniRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.1.1
A single entry in the table represents a single atmIfVptPnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniRowStatusEntry  

atmIfVptPnniRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.7.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptPnni components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfVptPnniComponentName 1.3.6.1.4.1.562.2.4.1.114.9.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptPnniStorageType 1.3.6.1.4.1.562.2.4.1.114.9.7.1.1.4
This variable represents the storage type value for the atmIfVptPnni tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptPnniIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.1.1.10
This variable represents the index for the atmIfVptPnni tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVptPnniProvTable 1.3.6.1.4.1.562.2.4.1.114.9.7.10
This group contains the provisionable attributes for the Pnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniProvEntry

atmIfVptPnniProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.10.1
An entry in the atmIfVptPnniProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniProvEntry  

atmIfVptPnniSoftPvcRetryPeriod 1.3.6.1.4.1.562.2.4.1.114.9.7.10.1.1
This attribute represents the time in seconds to wait between call setup retries. The resolution is to the nearest 10 seconds. This attribute has been obsoleted and is replaced by the softPvpAndPvcRetryPeriod attribute.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 20..999999  

atmIfVptPnniSoftPvpAndPvcRetryPeriod 1.3.6.1.4.1.562.2.4.1.114.9.7.10.1.2
This attribute represents the time in seconds to wait between soft PVP or soft PVC call setup retries. The resolution is to the nearest 10 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 20..999999  

atmIfVptPnniSoftPvpAndPvcHoldOffTime 1.3.6.1.4.1.562.2.4.1.114.9.7.10.1.5
This attribute specifies how long to hold off retries following a release or the connection. The resolution is to the nearest 50 ms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 50..20000  

atmIfVptPnniAdminWeightsTable 1.3.6.1.4.1.562.2.4.1.114.9.7.11
This group contains the provisionable administrative weights for the Pnni component. These weights will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniAdminWeightsEntry

atmIfVptPnniAdminWeightsEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.11.1
An entry in the atmIfVptPnniAdminWeightsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniAdminWeightsEntry  

atmIfVptPnniCbrWeight 1.3.6.1.4.1.562.2.4.1.114.9.7.11.1.1
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Constant Bit Rate (CBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfVptPnniRtVbrWeight 1.3.6.1.4.1.562.2.4.1.114.9.7.11.1.2
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Real-Time Variable Bit Rate (RT-VBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfVptPnniNrtVbrWeight 1.3.6.1.4.1.562.2.4.1.114.9.7.11.1.3
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Non Real-Time Variable Bit Rate (NRT-VBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfVptPnniUbrWeight 1.3.6.1.4.1.562.2.4.1.114.9.7.11.1.4
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Unspecified Bit Rate (UBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfVptPnniAcctOptTable 1.3.6.1.4.1.562.2.4.1.114.9.7.12
This group contains the provisionable attributes for accounting.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniAcctOptEntry

atmIfVptPnniAcctOptEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.12.1
An entry in the atmIfVptPnniAcctOptTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniAcctOptEntry  

atmIfVptPnniAccountCollection 1.3.6.1.4.1.562.2.4.1.114.9.7.12.1.1
This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit, or force. If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts). If none of the reasons is present, then accounting will be suppressed. The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

atmIfVptPnniAccountConnectionType 1.3.6.1.4.1.562.2.4.1.114.9.7.12.1.2
This attribute specifies whether accounting records generated by this interface should be marked as originating, terminating or intermediate. This attribute, in combination with the direction of the call, determines the value of attribute connPointType of the accounting record and may be used by downstream accounting processes to correlate the records. If the value is origTerm then records generated for incoming calls will be marked as originating and records generated for outgoing calls will be marked as terminating. If the value is intermediate then records generated for all calls will be marked as intermediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER origTerm(0), intermediate(1)  

atmIfVptPnniAccountClass 1.3.6.1.4.1.562.2.4.1.114.9.7.12.1.3
This attribute specifies the accounting class associated with the interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingServiceType or calledServiceType as appropriate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVptPnniServiceExchange 1.3.6.1.4.1.562.2.4.1.114.9.7.12.1.4
This attribute specifies the data service exchange associated with this interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingDse or calledDse as appropriate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVptPnniOperationalTable 1.3.6.1.4.1.562.2.4.1.114.9.7.13
This group contains the operational attributes for a Pnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniOperationalEntry

atmIfVptPnniOperationalEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.13.1
An entry in the atmIfVptPnniOperationalTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniOperationalEntry  

atmIfVptPnniPortId 1.3.6.1.4.1.562.2.4.1.114.9.7.13.1.1
This attribute indicates the port id of the PNNI interface, which is the parent AtmIf's instance number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfVptPnniVProvTable 1.3.6.1.4.1.562.2.4.1.114.9.7.14
This group contains the provisionable attributes for the Pnni component which are specific to virtual PNNI interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniVProvEntry

atmIfVptPnniVProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.14.1
An entry in the atmIfVptPnniVProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniVProvEntry  

atmIfVptPnniVpci 1.3.6.1.4.1.562.2.4.1.114.9.7.14.1.1
This attribute specifies the Virtual Path Connection Identifier (VPCI) to be used between this signalling entity and its peer. The VPCI of the peer virtual PNNI must have the same value for switched connections to be set up across the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVptPnniSig 1.3.6.1.4.1.562.2.4.1.114.9.7.2
OBJECT IDENTIFIER    

atmIfVptPnniSigRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.7.2.1
This entry controls the addition and deletion of atmIfVptPnniSig components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniSigRowStatusEntry

atmIfVptPnniSigRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.2.1.1
A single entry in the table represents a single atmIfVptPnniSig component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniSigRowStatusEntry  

atmIfVptPnniSigRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.7.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptPnniSig components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

atmIfVptPnniSigComponentName 1.3.6.1.4.1.562.2.4.1.114.9.7.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptPnniSigStorageType 1.3.6.1.4.1.562.2.4.1.114.9.7.2.1.1.4
This variable represents the storage type value for the atmIfVptPnniSig tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptPnniSigIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.2.1.1.10
This variable represents the index for the atmIfVptPnniSig tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVptPnniSigProvTable 1.3.6.1.4.1.562.2.4.1.114.9.7.2.10
This attribute group contains the provisionable attributes for the Signalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniSigProvEntry

atmIfVptPnniSigProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.2.10.1
An entry in the atmIfVptPnniSigProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniSigProvEntry  

atmIfVptPnniSigVci 1.3.6.1.4.1.562.2.4.1.114.9.7.2.10.1.1
This attribute specifies the signalling channel number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfVptPnniSigAddressConversion 1.3.6.1.4.1.562.2.4.1.114.9.7.2.10.1.2
This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), nativeE164(1), nsap(2)  

atmIfVptPnniSigStateTable 1.3.6.1.4.1.562.2.4.1.114.9.7.2.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniSigStateEntry

atmIfVptPnniSigStateEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.2.11.1
An entry in the atmIfVptPnniSigStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniSigStateEntry  

atmIfVptPnniSigAdminState 1.3.6.1.4.1.562.2.4.1.114.9.7.2.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

atmIfVptPnniSigOperationalState 1.3.6.1.4.1.562.2.4.1.114.9.7.2.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

atmIfVptPnniSigUsageState 1.3.6.1.4.1.562.2.4.1.114.9.7.2.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

atmIfVptPnniSigOperTable 1.3.6.1.4.1.562.2.4.1.114.9.7.2.12
This attribute contains the operational attributes for the AtmSignalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniSigOperEntry

atmIfVptPnniSigOperEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.2.12.1
An entry in the atmIfVptPnniSigOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniSigOperEntry  

atmIfVptPnniSigLastTxCauseCode 1.3.6.1.4.1.562.2.4.1.114.9.7.2.12.1.1
This attribute indicates the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVptPnniSigLastTxDiagCode 1.3.6.1.4.1.562.2.4.1.114.9.7.2.12.1.2
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

atmIfVptPnniSigLastRxCauseCode 1.3.6.1.4.1.562.2.4.1.114.9.7.2.12.1.3
This attribute contains the cause code in the last received signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVptPnniSigLastRxDiagCode 1.3.6.1.4.1.562.2.4.1.114.9.7.2.12.1.4
This attribute contains the diagnostic code in the last received signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

atmIfVptPnniSigStatsTable 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13
This attribute group contains the statistics associated with the AtmSignalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniSigStatsEntry

atmIfVptPnniSigStatsEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1
An entry in the atmIfVptPnniSigStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniSigStatsEntry  

atmIfVptPnniSigCurrentConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.1
This attribute indicates the total number of currently active connections.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptPnniSigPeakConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.2
This attribute indicates the high water mark of active point-to- point and point-to-multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfVptPnniSigSuccessfulConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.3
This attribute counts the total number of switched point-to- point and point-to-multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptPnniSigFailedConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.4
This attribute counts the total number of switched connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptPnniSigTxPdus 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.5
This attribute counts the number of transmitted signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptPnniSigRxPdus 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.6
This attribute counts the number of received signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptPnniSigCurrentPmpConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.7
This attribute indicates the number of currently active point-to- multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfVptPnniSigPeakPmpConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.8
This attribute indicates the high water mark of active point-to- multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfVptPnniSigSuccessfulPmpConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.9
This attribute counts the total number of switched point-to- multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptPnniSigFailedPmpConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.10
This attribute counts the number of switched point-to- multipoint connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptPnniSigNewCurrentConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.11
This attribute indicates the total number of currently active point-to- point and point-to-multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfVptPnniSigVcd 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2
OBJECT IDENTIFIER    

atmIfVptPnniSigVcdRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.1
This entry controls the addition and deletion of atmIfVptPnniSigVcd components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniSigVcdRowStatusEntry

atmIfVptPnniSigVcdRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.1.1
A single entry in the table represents a single atmIfVptPnniSigVcd component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniSigVcdRowStatusEntry  

atmIfVptPnniSigVcdRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptPnniSigVcd components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfVptPnniSigVcdComponentName 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptPnniSigVcdStorageType 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.1.1.4
This variable represents the storage type value for the atmIfVptPnniSigVcd tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptPnniSigVcdIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.1.1.10
This variable represents the index for the atmIfVptPnniSigVcd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVptPnniSigVcdProvTable 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.10
This group contains the provisionable traffic attributes for a control channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniSigVcdProvEntry

atmIfVptPnniSigVcdProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.10.1
An entry in the atmIfVptPnniSigVcdProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniSigVcdProvEntry  

atmIfVptPnniSigVcdTrafficDescType 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

atmIfVptPnniSigVcdAtmServiceCategory 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

atmIfVptPnniSigVcdQosClass 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

atmIfVptPnniSigVcdTrafficShaping 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfVptPnniSigVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

atmIfVptPnniSigVcdUsageParameterControl 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfVptPnniSigVcdTdpTable 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniSigVcdTdpEntry

atmIfVptPnniSigVcdTdpEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.387.1
An entry in the atmIfVptPnniSigVcdTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniSigVcdTdpEntry  

atmIfVptPnniSigVcdTdpIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.387.1.1
This variable represents the atmIfVptPnniSigVcdTdpTable specific index for the atmIfVptPnniSigVcdTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..5  

atmIfVptPnniSigVcdTdpValue 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.387.1.2
This variable represents an individual value for the atmIfVptPnniSigVcdTdpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

atmIfVptPnniRcc 1.3.6.1.4.1.562.2.4.1.114.9.7.3
OBJECT IDENTIFIER    

atmIfVptPnniRccRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.1
This entry controls the addition and deletion of atmIfVptPnniRcc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccRowStatusEntry

atmIfVptPnniRccRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.1.1
A single entry in the table represents a single atmIfVptPnniRcc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniRccRowStatusEntry  

atmIfVptPnniRccRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.7.3.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptPnniRcc components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

atmIfVptPnniRccComponentName 1.3.6.1.4.1.562.2.4.1.114.9.7.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptPnniRccStorageType 1.3.6.1.4.1.562.2.4.1.114.9.7.3.1.1.4
This variable represents the storage type value for the atmIfVptPnniRcc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptPnniRccIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.3.1.1.10
This variable represents the index for the atmIfVptPnniRcc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVptPnniRccProvTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.10
This group contains the generic provisionable attributes of an Rcc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccProvEntry

atmIfVptPnniRccProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.10.1
An entry in the atmIfVptPnniRccProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniRccProvEntry  

atmIfVptPnniRccVci 1.3.6.1.4.1.562.2.4.1.114.9.7.3.10.1.1
This attribute specifies the VCI for the Routing Control Channel (RCC). It is not recommended that the value be changed from the default of 18 unless absolutely necessary. If a different VCI is specified, ensure that the RCC at the far end is provisioned to use the same VCI, otherwise the RCC will not come up.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfVptPnniRccHlParmsTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11
This group contains the provisionable Hello protocol parameters for an Rcc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccHlParmsEntry

atmIfVptPnniRccHlParmsEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11.1
An entry in the atmIfVptPnniRccHlParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniRccHlParmsEntry  

atmIfVptPnniRccHelloHoldDown 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11.1.1
This attribute is used to limit the rate at which this node sends out Hello packets. Specifically, it specifies the minimum time between successive Hellos. A value of 0 specifies that the value provisioned for the helloHoldDown attribute of the ARtg Pnni component should be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FixedPoint1 0..655350  

atmIfVptPnniRccHelloInterval 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11.1.2
This attribute specifies the duration of the Hello Timer. Every helloInterval seconds, this node will send out a Hello packet to the neighbor node, subject to the helloHoldDown timer having expired at least once since the last Hello packet was sent. A value of 0 specifies that the value provisioned for the helloInterval attribute of the ARtg Pnni component should be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfVptPnniRccHelloInactivityFactor 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11.1.3
This attribute specifies the number of Hello intervals allowed to pass without receiving a Hello from the neighbor node, before an attempt is made to re-stage. The hello inactivity timer is enabled in the oneWayInside, twoWayInside, oneWayOutside, twoWayOutside and commonOutside hello states (see the helloState attribute on the Rcc component for a description of these states). Note that the value for the Hello interval used in the calculation is the one specified in the Hello packet from the neighbor node. A value of 0 specifies that the value provisioned for the helloInactivityFactor attribute of the ARtg Pnni component should be used. DESCRIPTION
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfVptPnniRccStateTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccStateEntry

atmIfVptPnniRccStateEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.12.1
An entry in the atmIfVptPnniRccStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniRccStateEntry  

atmIfVptPnniRccAdminState 1.3.6.1.4.1.562.2.4.1.114.9.7.3.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

atmIfVptPnniRccOperationalState 1.3.6.1.4.1.562.2.4.1.114.9.7.3.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

atmIfVptPnniRccUsageState 1.3.6.1.4.1.562.2.4.1.114.9.7.3.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

atmIfVptPnniRccOperTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.13
This group contains the operational attributes for an Rcc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccOperEntry

atmIfVptPnniRccOperEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.13.1
An entry in the atmIfVptPnniRccOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniRccOperEntry  

atmIfVptPnniRccType 1.3.6.1.4.1.562.2.4.1.114.9.7.3.13.1.1
This attribute indicates the role of this link in the PNNI hierarchy. The following values are possible: unknown: the Hello protocol has not yet determined the role of the link. lowestLevelHorizLink: the link is a horizontal link between two lowest level nodes. lowestLevelOutsideLink: the link is an outside link between two border nodes. horizontalLinkToLgn: the link is a horizontal link to a Logical Group Node (LGN). uplink: the link is a uplink to a higher level LGN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), lowestLevelHorizLink(1), lowestLevelOutsideLink(2), horizontalLinkToLGN(3), uplink(4)  

atmIfVptPnniRccNegotiatedVersion 1.3.6.1.4.1.562.2.4.1.114.9.7.3.13.1.2
This attribute indicates the PNNI version negotiated with the neighbor node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unsupported(0), version1point0(1)  

atmIfVptPnniRccHelloState 1.3.6.1.4.1.562.2.4.1.114.9.7.3.13.1.3
This attribute indicates the state of the Hello protocol exchange over this link. The following are the possible values for this attribute: down: the link is down; no PNNI routing packets will be sent over or received over such a link. This is the initial state of the Hello Finite State Machine, and can also be reached when lower-level protocols have indicated that the link is not usable. attempt: no Hello packets or Hello packets, with mismatch information, have been received recently from the neighbor. Attempts are made to contact the neighbor node by sending out Hello packets every helloInterval seconds. oneWayInside: Hello packets have been recently received from the neighbor and it has been established that both nodes are members of the same peer group, but the remote node ID and remote port ID in the neighbor's Hello packets were set to zero. A Hello packet is sent to the neighbor and the Hello timer is restarted. twoWayInside: Bidirectional communication over this link between this node and the neighbor node has been achieved. oneWayOutside: Hello packets have been recently received from the neighbor and it has been established that both nodes are members of a different peer group, but the remote node ID and remote port ID in the neighbor's Hello packets were set to zero. twoWayOutside: Hellos have recently been received from the neighbor indicating that the neighbor node belongs to a different peer group. The correct remote node ID and remote port ID fields were included in the Hello packet, but the nodal hierarchy list did not include any common peer group. This state can also be reached if a hierarchy mismatch occurs while in the commonOutside state. commonOutside: A common level of the routing hierarchy has been found, in addition to achieving full bi-directional communication between the two nodes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), down(1), attempt(2), oneWayInside(3), twoWayInside(4), oneWayOutside(5), twoWayOutside(6), commonOutside(7)  

atmIfVptPnniRccRemoteNodeId 1.3.6.1.4.1.562.2.4.1.114.9.7.3.13.1.4
This attribute indicates the neighbor node's node id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(22)  

atmIfVptPnniRccRemotePortId 1.3.6.1.4.1.562.2.4.1.114.9.7.3.13.1.5
This attribute indicates the neighbor node's port id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfVptPnniRccStatsTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.14
This group contains the statistical attributes for an Rcc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccStatsEntry

atmIfVptPnniRccStatsEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.14.1
An entry in the atmIfVptPnniRccStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniRccStatsEntry  

atmIfVptPnniRccHelloPacketsRx 1.3.6.1.4.1.562.2.4.1.114.9.7.3.14.1.1
This attribute counts the total number of Hello packets received across this RCC, including bad and mismatched Hello packets. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptPnniRccHelloPacketsTx 1.3.6.1.4.1.562.2.4.1.114.9.7.3.14.1.2
This attribute counts the total number of Hello packets transmitted across this RCC. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptPnniRccMismatchedHelloPacketsRx 1.3.6.1.4.1.562.2.4.1.114.9.7.3.14.1.3
This attribute counts the total number of mismatched Hello packets received over this RCC. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptPnniRccBadHelloPacketsRx 1.3.6.1.4.1.562.2.4.1.114.9.7.3.14.1.4
This attribute counts the total number of bad Hello packets received over this RCC. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptPnniRccVcd 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2
OBJECT IDENTIFIER    

atmIfVptPnniRccVcdRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.1
This entry controls the addition and deletion of atmIfVptPnniRccVcd components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccVcdRowStatusEntry

atmIfVptPnniRccVcdRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.1.1
A single entry in the table represents a single atmIfVptPnniRccVcd component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniRccVcdRowStatusEntry  

atmIfVptPnniRccVcdRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptPnniRccVcd components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfVptPnniRccVcdComponentName 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptPnniRccVcdStorageType 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.1.1.4
This variable represents the storage type value for the atmIfVptPnniRccVcd tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptPnniRccVcdIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.1.1.10
This variable represents the index for the atmIfVptPnniRccVcd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVptPnniRccVcdProvTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.10
This group contains the provisionable traffic attributes for a control channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccVcdProvEntry

atmIfVptPnniRccVcdProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.10.1
An entry in the atmIfVptPnniRccVcdProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniRccVcdProvEntry  

atmIfVptPnniRccVcdTrafficDescType 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

atmIfVptPnniRccVcdAtmServiceCategory 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

atmIfVptPnniRccVcdQosClass 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

atmIfVptPnniRccVcdTrafficShaping 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfVptPnniRccVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

atmIfVptPnniRccVcdUsageParameterControl 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfVptPnniRccVcdTdpTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccVcdTdpEntry

atmIfVptPnniRccVcdTdpEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.387.1
An entry in the atmIfVptPnniRccVcdTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniRccVcdTdpEntry  

atmIfVptPnniRccVcdTdpIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.387.1.1
This variable represents the atmIfVptPnniRccVcdTdpTable specific index for the atmIfVptPnniRccVcdTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..5  

atmIfVptPnniRccVcdTdpValue 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.387.1.2
This variable represents an individual value for the atmIfVptPnniRccVcdTdpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

atmIfVptPnniAddr 1.3.6.1.4.1.562.2.4.1.114.9.7.4
OBJECT IDENTIFIER    

atmIfVptPnniAddrRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.7.4.1
This entry controls the addition and deletion of atmIfVptPnniAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniAddrRowStatusEntry

atmIfVptPnniAddrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.4.1.1
A single entry in the table represents a single atmIfVptPnniAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniAddrRowStatusEntry  

atmIfVptPnniAddrRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.7.4.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptPnniAddr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfVptPnniAddrComponentName 1.3.6.1.4.1.562.2.4.1.114.9.7.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptPnniAddrStorageType 1.3.6.1.4.1.562.2.4.1.114.9.7.4.1.1.4
This variable represents the storage type value for the atmIfVptPnniAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptPnniAddrAddressIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.4.1.1.10
This variable represents an index for the atmIfVptPnniAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..40)  

atmIfVptPnniAddrAddressTypeIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.4.1.1.11
This variable represents an index for the atmIfVptPnniAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER primary(0), alternate(1), registered(2), default(3)  

atmIfVptPnniAddrOperTable 1.3.6.1.4.1.562.2.4.1.114.9.7.4.10
This attribute group contains the operational attributes for the Address component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniAddrOperEntry

atmIfVptPnniAddrOperEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.4.10.1
An entry in the atmIfVptPnniAddrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniAddrOperEntry  

atmIfVptPnniAddrScope 1.3.6.1.4.1.562.2.4.1.114.9.7.4.10.1.1
This attribute indicates the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy. If no PnniInfo subcomponent has been provisioned, then the scope will default to the level of this node in the PNNI hierarchy. If this node does not participate in a PNNI hierarchy, then this attribute will have the value of -1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..104  

atmIfVptPnniAddrReachability 1.3.6.1.4.1.562.2.4.1.114.9.7.4.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

atmIfVptPnniAddrTermSP 1.3.6.1.4.1.562.2.4.1.114.9.7.4.2
OBJECT IDENTIFIER    

atmIfVptPnniAddrTermSPRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.7.4.2.1
This entry controls the addition and deletion of atmIfVptPnniAddrTermSP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniAddrTermSPRowStatusEntry

atmIfVptPnniAddrTermSPRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.4.2.1.1
A single entry in the table represents a single atmIfVptPnniAddrTermSP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniAddrTermSPRowStatusEntry  

atmIfVptPnniAddrTermSPRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.7.4.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptPnniAddrTermSP components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfVptPnniAddrTermSPComponentName 1.3.6.1.4.1.562.2.4.1.114.9.7.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptPnniAddrTermSPStorageType 1.3.6.1.4.1.562.2.4.1.114.9.7.4.2.1.1.4
This variable represents the storage type value for the atmIfVptPnniAddrTermSP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptPnniAddrTermSPIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.4.2.1.1.10
This variable represents the index for the atmIfVptPnniAddrTermSP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVptPnniAddrPnniInfo 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3
OBJECT IDENTIFIER    

atmIfVptPnniAddrPnniInfoRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.1
This entry controls the addition and deletion of atmIfVptPnniAddrPnniInfo components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniAddrPnniInfoRowStatusEntry

atmIfVptPnniAddrPnniInfoRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.1.1
A single entry in the table represents a single atmIfVptPnniAddrPnniInfo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniAddrPnniInfoRowStatusEntry  

atmIfVptPnniAddrPnniInfoRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptPnniAddrPnniInfo components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfVptPnniAddrPnniInfoComponentName 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptPnniAddrPnniInfoStorageType 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.1.1.4
This variable represents the storage type value for the atmIfVptPnniAddrPnniInfo tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptPnniAddrPnniInfoIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.1.1.10
This variable represents the index for the atmIfVptPnniAddrPnniInfo tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVptPnniAddrPnniInfoProvTable 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.10
This attribute group contains the provisioned attributes relating to PNNI for a PnniInfo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniAddrPnniInfoProvEntry

atmIfVptPnniAddrPnniInfoProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.10.1
An entry in the atmIfVptPnniAddrPnniInfoProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptPnniAddrPnniInfoProvEntry  

atmIfVptPnniAddrPnniInfoScope 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.10.1.1
This attribute specifies the scope of the ATM address, which is the highest level up to which this address will be advertised in the PNNI hierarchy. The scope must be set to a value numerically less than or equal to the level of the lowest level peer group containing this node. Setting the scope to 0 will cause the address to be advertised globally within this PNNI routing domain.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1..104  

atmIfVptPnniAddrPnniInfoReachability 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

atmIfPnni 1.3.6.1.4.1.562.2.4.1.114.96
OBJECT IDENTIFIER    

atmIfPnniRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.96.1
This entry controls the addition and deletion of atmIfPnni components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRowStatusEntry

atmIfPnniRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.96.1.1
A single entry in the table represents a single atmIfPnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniRowStatusEntry  

atmIfPnniRowStatus 1.3.6.1.4.1.562.2.4.1.114.96.1.1.1
This variable is used as the basis for SNMP naming of atmIfPnni components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfPnniComponentName 1.3.6.1.4.1.562.2.4.1.114.96.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfPnniStorageType 1.3.6.1.4.1.562.2.4.1.114.96.1.1.4
This variable represents the storage type value for the atmIfPnni tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfPnniIndex 1.3.6.1.4.1.562.2.4.1.114.96.1.1.10
This variable represents the index for the atmIfPnni tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfPnniProvTable 1.3.6.1.4.1.562.2.4.1.114.96.10
This group contains the provisionable attributes for the Pnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniProvEntry

atmIfPnniProvEntry 1.3.6.1.4.1.562.2.4.1.114.96.10.1
An entry in the atmIfPnniProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniProvEntry  

atmIfPnniSoftPvcRetryPeriod 1.3.6.1.4.1.562.2.4.1.114.96.10.1.1
This attribute represents the time in seconds to wait between call setup retries. The resolution is to the nearest 10 seconds. This attribute has been obsoleted and is replaced by the softPvpAndPvcRetryPeriod attribute.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 20..999999  

atmIfPnniSoftPvpAndPvcRetryPeriod 1.3.6.1.4.1.562.2.4.1.114.96.10.1.2
This attribute represents the time in seconds to wait between soft PVP or soft PVC call setup retries. The resolution is to the nearest 10 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 20..999999  

atmIfPnniSoftPvpAndPvcHoldOffTime 1.3.6.1.4.1.562.2.4.1.114.96.10.1.5
This attribute specifies how long to hold off retries following a release or the connection. The resolution is to the nearest 50 ms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 50..20000  

atmIfPnniAdminWeightsTable 1.3.6.1.4.1.562.2.4.1.114.96.11
This group contains the provisionable administrative weights for the Pnni component. These weights will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniAdminWeightsEntry

atmIfPnniAdminWeightsEntry 1.3.6.1.4.1.562.2.4.1.114.96.11.1
An entry in the atmIfPnniAdminWeightsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniAdminWeightsEntry  

atmIfPnniCbrWeight 1.3.6.1.4.1.562.2.4.1.114.96.11.1.1
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Constant Bit Rate (CBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfPnniRtVbrWeight 1.3.6.1.4.1.562.2.4.1.114.96.11.1.2
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Real-Time Variable Bit Rate (RT-VBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfPnniNrtVbrWeight 1.3.6.1.4.1.562.2.4.1.114.96.11.1.3
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Non Real-Time Variable Bit Rate (NRT-VBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfPnniUbrWeight 1.3.6.1.4.1.562.2.4.1.114.96.11.1.4
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Unspecified Bit Rate (UBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfPnniAcctOptTable 1.3.6.1.4.1.562.2.4.1.114.96.12
This group contains the provisionable attributes for accounting.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniAcctOptEntry

atmIfPnniAcctOptEntry 1.3.6.1.4.1.562.2.4.1.114.96.12.1
An entry in the atmIfPnniAcctOptTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniAcctOptEntry  

atmIfPnniAccountCollection 1.3.6.1.4.1.562.2.4.1.114.96.12.1.1
This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit, or force. If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts). If none of the reasons is present, then accounting will be suppressed. The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

atmIfPnniAccountConnectionType 1.3.6.1.4.1.562.2.4.1.114.96.12.1.2
This attribute specifies whether accounting records generated by this interface should be marked as originating, terminating or intermediate. This attribute, in combination with the direction of the call, determines the value of attribute connPointType of the accounting record and may be used by downstream accounting processes to correlate the records. If the value is origTerm then records generated for incoming calls will be marked as originating and records generated for outgoing calls will be marked as terminating. If the value is intermediate then records generated for all calls will be marked as intermediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER origTerm(0), intermediate(1)  

atmIfPnniAccountClass 1.3.6.1.4.1.562.2.4.1.114.96.12.1.3
This attribute specifies the accounting class associated with the interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingServiceType or calledServiceType as appropriate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfPnniServiceExchange 1.3.6.1.4.1.562.2.4.1.114.96.12.1.4
This attribute specifies the data service exchange associated with this interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingDse or calledDse as appropriate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfPnniOperationalTable 1.3.6.1.4.1.562.2.4.1.114.96.13
This group contains the operational attributes for a Pnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniOperationalEntry

atmIfPnniOperationalEntry 1.3.6.1.4.1.562.2.4.1.114.96.13.1
An entry in the atmIfPnniOperationalTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniOperationalEntry  

atmIfPnniPortId 1.3.6.1.4.1.562.2.4.1.114.96.13.1.1
This attribute indicates the port id of the PNNI interface, which is the parent AtmIf's instance number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfPnniSig 1.3.6.1.4.1.562.2.4.1.114.96.2
OBJECT IDENTIFIER    

atmIfPnniSigRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.96.2.1
This entry controls the addition and deletion of atmIfPnniSig components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniSigRowStatusEntry

atmIfPnniSigRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.96.2.1.1
A single entry in the table represents a single atmIfPnniSig component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniSigRowStatusEntry  

atmIfPnniSigRowStatus 1.3.6.1.4.1.562.2.4.1.114.96.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfPnniSig components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

atmIfPnniSigComponentName 1.3.6.1.4.1.562.2.4.1.114.96.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfPnniSigStorageType 1.3.6.1.4.1.562.2.4.1.114.96.2.1.1.4
This variable represents the storage type value for the atmIfPnniSig tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfPnniSigIndex 1.3.6.1.4.1.562.2.4.1.114.96.2.1.1.10
This variable represents the index for the atmIfPnniSig tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfPnniSigProvTable 1.3.6.1.4.1.562.2.4.1.114.96.2.10
This attribute group contains the provisionable attributes for the Signalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniSigProvEntry

atmIfPnniSigProvEntry 1.3.6.1.4.1.562.2.4.1.114.96.2.10.1
An entry in the atmIfPnniSigProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniSigProvEntry  

atmIfPnniSigVci 1.3.6.1.4.1.562.2.4.1.114.96.2.10.1.1
This attribute specifies the signalling channel number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfPnniSigAddressConversion 1.3.6.1.4.1.562.2.4.1.114.96.2.10.1.2
This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), nativeE164(1), nsap(2)  

atmIfPnniSigStateTable 1.3.6.1.4.1.562.2.4.1.114.96.2.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniSigStateEntry

atmIfPnniSigStateEntry 1.3.6.1.4.1.562.2.4.1.114.96.2.11.1
An entry in the atmIfPnniSigStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniSigStateEntry  

atmIfPnniSigAdminState 1.3.6.1.4.1.562.2.4.1.114.96.2.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

atmIfPnniSigOperationalState 1.3.6.1.4.1.562.2.4.1.114.96.2.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

atmIfPnniSigUsageState 1.3.6.1.4.1.562.2.4.1.114.96.2.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

atmIfPnniSigOperTable 1.3.6.1.4.1.562.2.4.1.114.96.2.12
This attribute contains the operational attributes for the AtmSignalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniSigOperEntry

atmIfPnniSigOperEntry 1.3.6.1.4.1.562.2.4.1.114.96.2.12.1
An entry in the atmIfPnniSigOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniSigOperEntry  

atmIfPnniSigLastTxCauseCode 1.3.6.1.4.1.562.2.4.1.114.96.2.12.1.1
This attribute indicates the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfPnniSigLastTxDiagCode 1.3.6.1.4.1.562.2.4.1.114.96.2.12.1.2
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

atmIfPnniSigLastRxCauseCode 1.3.6.1.4.1.562.2.4.1.114.96.2.12.1.3
This attribute contains the cause code in the last received signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfPnniSigLastRxDiagCode 1.3.6.1.4.1.562.2.4.1.114.96.2.12.1.4
This attribute contains the diagnostic code in the last received signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

atmIfPnniSigStatsTable 1.3.6.1.4.1.562.2.4.1.114.96.2.13
This attribute group contains the statistics associated with the AtmSignalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniSigStatsEntry

atmIfPnniSigStatsEntry 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1
An entry in the atmIfPnniSigStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniSigStatsEntry  

atmIfPnniSigCurrentConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.1
This attribute indicates the total number of currently active connections.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfPnniSigPeakConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.2
This attribute indicates the high water mark of active point-to- point and point-to-multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfPnniSigSuccessfulConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.3
This attribute counts the total number of switched point-to- point and point-to-multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfPnniSigFailedConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.4
This attribute counts the total number of switched connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfPnniSigTxPdus 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.5
This attribute counts the number of transmitted signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfPnniSigRxPdus 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.6
This attribute counts the number of received signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfPnniSigCurrentPmpConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.7
This attribute indicates the number of currently active point-to- multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfPnniSigPeakPmpConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.8
This attribute indicates the high water mark of active point-to- multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfPnniSigSuccessfulPmpConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.9
This attribute counts the total number of switched point-to- multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfPnniSigFailedPmpConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.10
This attribute counts the number of switched point-to- multipoint connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfPnniSigNewCurrentConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.11
This attribute indicates the total number of currently active point-to- point and point-to-multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfPnniSigVcd 1.3.6.1.4.1.562.2.4.1.114.96.2.2
OBJECT IDENTIFIER    

atmIfPnniSigVcdRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.96.2.2.1
This entry controls the addition and deletion of atmIfPnniSigVcd components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniSigVcdRowStatusEntry

atmIfPnniSigVcdRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.96.2.2.1.1
A single entry in the table represents a single atmIfPnniSigVcd component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniSigVcdRowStatusEntry  

atmIfPnniSigVcdRowStatus 1.3.6.1.4.1.562.2.4.1.114.96.2.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfPnniSigVcd components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfPnniSigVcdComponentName 1.3.6.1.4.1.562.2.4.1.114.96.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfPnniSigVcdStorageType 1.3.6.1.4.1.562.2.4.1.114.96.2.2.1.1.4
This variable represents the storage type value for the atmIfPnniSigVcd tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfPnniSigVcdIndex 1.3.6.1.4.1.562.2.4.1.114.96.2.2.1.1.10
This variable represents the index for the atmIfPnniSigVcd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfPnniSigVcdProvTable 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10
This group contains the provisionable traffic attributes for a control channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniSigVcdProvEntry

atmIfPnniSigVcdProvEntry 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1
An entry in the atmIfPnniSigVcdProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniSigVcdProvEntry  

atmIfPnniSigVcdTrafficDescType 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

atmIfPnniSigVcdAtmServiceCategory 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

atmIfPnniSigVcdQosClass 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

atmIfPnniSigVcdTrafficShaping 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfPnniSigVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

atmIfPnniSigVcdUsageParameterControl 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfPnniSigVcdTdpTable 1.3.6.1.4.1.562.2.4.1.114.96.2.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniSigVcdTdpEntry

atmIfPnniSigVcdTdpEntry 1.3.6.1.4.1.562.2.4.1.114.96.2.2.387.1
An entry in the atmIfPnniSigVcdTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniSigVcdTdpEntry  

atmIfPnniSigVcdTdpIndex 1.3.6.1.4.1.562.2.4.1.114.96.2.2.387.1.1
This variable represents the atmIfPnniSigVcdTdpTable specific index for the atmIfPnniSigVcdTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..5  

atmIfPnniSigVcdTdpValue 1.3.6.1.4.1.562.2.4.1.114.96.2.2.387.1.2
This variable represents an individual value for the atmIfPnniSigVcdTdpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

atmIfPnniRcc 1.3.6.1.4.1.562.2.4.1.114.96.3
OBJECT IDENTIFIER    

atmIfPnniRccRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.96.3.1
This entry controls the addition and deletion of atmIfPnniRcc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccRowStatusEntry

atmIfPnniRccRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.1.1
A single entry in the table represents a single atmIfPnniRcc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniRccRowStatusEntry  

atmIfPnniRccRowStatus 1.3.6.1.4.1.562.2.4.1.114.96.3.1.1.1
This variable is used as the basis for SNMP naming of atmIfPnniRcc components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

atmIfPnniRccComponentName 1.3.6.1.4.1.562.2.4.1.114.96.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfPnniRccStorageType 1.3.6.1.4.1.562.2.4.1.114.96.3.1.1.4
This variable represents the storage type value for the atmIfPnniRcc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfPnniRccIndex 1.3.6.1.4.1.562.2.4.1.114.96.3.1.1.10
This variable represents the index for the atmIfPnniRcc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfPnniRccProvTable 1.3.6.1.4.1.562.2.4.1.114.96.3.10
This group contains the generic provisionable attributes of an Rcc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccProvEntry

atmIfPnniRccProvEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.10.1
An entry in the atmIfPnniRccProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniRccProvEntry  

atmIfPnniRccVci 1.3.6.1.4.1.562.2.4.1.114.96.3.10.1.1
This attribute specifies the VCI for the Routing Control Channel (RCC). It is not recommended that the value be changed from the default of 18 unless absolutely necessary. If a different VCI is specified, ensure that the RCC at the far end is provisioned to use the same VCI, otherwise the RCC will not come up.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfPnniRccHlParmsTable 1.3.6.1.4.1.562.2.4.1.114.96.3.11
This group contains the provisionable Hello protocol parameters for an Rcc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccHlParmsEntry

atmIfPnniRccHlParmsEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.11.1
An entry in the atmIfPnniRccHlParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniRccHlParmsEntry  

atmIfPnniRccHelloHoldDown 1.3.6.1.4.1.562.2.4.1.114.96.3.11.1.1
This attribute is used to limit the rate at which this node sends out Hello packets. Specifically, it specifies the minimum time between successive Hellos. A value of 0 specifies that the value provisioned for the helloHoldDown attribute of the ARtg Pnni component should be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FixedPoint1 0..655350  

atmIfPnniRccHelloInterval 1.3.6.1.4.1.562.2.4.1.114.96.3.11.1.2
This attribute specifies the duration of the Hello Timer. Every helloInterval seconds, this node will send out a Hello packet to the neighbor node, subject to the helloHoldDown timer having expired at least once since the last Hello packet was sent. A value of 0 specifies that the value provisioned for the helloInterval attribute of the ARtg Pnni component should be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfPnniRccHelloInactivityFactor 1.3.6.1.4.1.562.2.4.1.114.96.3.11.1.3
This attribute specifies the number of Hello intervals allowed to pass without receiving a Hello from the neighbor node, before an attempt is made to re-stage. The hello inactivity timer is enabled in the oneWayInside, twoWayInside, oneWayOutside, twoWayOutside and commonOutside hello states (see the helloState attribute on the Rcc component for a description of these states). Note that the value for the Hello interval used in the calculation is the one specified in the Hello packet from the neighbor node. A value of 0 specifies that the value provisioned for the helloInactivityFactor attribute of the ARtg Pnni component should be used. DESCRIPTION
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfPnniRccStateTable 1.3.6.1.4.1.562.2.4.1.114.96.3.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccStateEntry

atmIfPnniRccStateEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.12.1
An entry in the atmIfPnniRccStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniRccStateEntry  

atmIfPnniRccAdminState 1.3.6.1.4.1.562.2.4.1.114.96.3.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

atmIfPnniRccOperationalState 1.3.6.1.4.1.562.2.4.1.114.96.3.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

atmIfPnniRccUsageState 1.3.6.1.4.1.562.2.4.1.114.96.3.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

atmIfPnniRccOperTable 1.3.6.1.4.1.562.2.4.1.114.96.3.13
This group contains the operational attributes for an Rcc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccOperEntry

atmIfPnniRccOperEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.13.1
An entry in the atmIfPnniRccOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniRccOperEntry  

atmIfPnniRccType 1.3.6.1.4.1.562.2.4.1.114.96.3.13.1.1
This attribute indicates the role of this link in the PNNI hierarchy. The following values are possible: unknown: the Hello protocol has not yet determined the role of the link. lowestLevelHorizLink: the link is a horizontal link between two lowest level nodes. lowestLevelOutsideLink: the link is an outside link between two border nodes. horizontalLinkToLgn: the link is a horizontal link to a Logical Group Node (LGN). uplink: the link is a uplink to a higher level LGN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), lowestLevelHorizLink(1), lowestLevelOutsideLink(2), horizontalLinkToLGN(3), uplink(4)  

atmIfPnniRccNegotiatedVersion 1.3.6.1.4.1.562.2.4.1.114.96.3.13.1.2
This attribute indicates the PNNI version negotiated with the neighbor node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unsupported(0), version1point0(1)  

atmIfPnniRccHelloState 1.3.6.1.4.1.562.2.4.1.114.96.3.13.1.3
This attribute indicates the state of the Hello protocol exchange over this link. The following are the possible values for this attribute: down: the link is down; no PNNI routing packets will be sent over or received over such a link. This is the initial state of the Hello Finite State Machine, and can also be reached when lower-level protocols have indicated that the link is not usable. attempt: no Hello packets or Hello packets, with mismatch information, have been received recently from the neighbor. Attempts are made to contact the neighbor node by sending out Hello packets every helloInterval seconds. oneWayInside: Hello packets have been recently received from the neighbor and it has been established that both nodes are members of the same peer group, but the remote node ID and remote port ID in the neighbor's Hello packets were set to zero. A Hello packet is sent to the neighbor and the Hello timer is restarted. twoWayInside: Bidirectional communication over this link between this node and the neighbor node has been achieved. oneWayOutside: Hello packets have been recently received from the neighbor and it has been established that both nodes are members of a different peer group, but the remote node ID and remote port ID in the neighbor's Hello packets were set to zero. twoWayOutside: Hellos have recently been received from the neighbor indicating that the neighbor node belongs to a different peer group. The correct remote node ID and remote port ID fields were included in the Hello packet, but the nodal hierarchy list did not include any common peer group. This state can also be reached if a hierarchy mismatch occurs while in the commonOutside state. commonOutside: A common level of the routing hierarchy has been found, in addition to achieving full bi-directional communication between the two nodes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), down(1), attempt(2), oneWayInside(3), twoWayInside(4), oneWayOutside(5), twoWayOutside(6), commonOutside(7)  

atmIfPnniRccRemoteNodeId 1.3.6.1.4.1.562.2.4.1.114.96.3.13.1.4
This attribute indicates the neighbor node's node id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(22)  

atmIfPnniRccRemotePortId 1.3.6.1.4.1.562.2.4.1.114.96.3.13.1.5
This attribute indicates the neighbor node's port id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfPnniRccStatsTable 1.3.6.1.4.1.562.2.4.1.114.96.3.14
This group contains the statistical attributes for an Rcc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccStatsEntry

atmIfPnniRccStatsEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.14.1
An entry in the atmIfPnniRccStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniRccStatsEntry  

atmIfPnniRccHelloPacketsRx 1.3.6.1.4.1.562.2.4.1.114.96.3.14.1.1
This attribute counts the total number of Hello packets received across this RCC, including bad and mismatched Hello packets. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfPnniRccHelloPacketsTx 1.3.6.1.4.1.562.2.4.1.114.96.3.14.1.2
This attribute counts the total number of Hello packets transmitted across this RCC. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfPnniRccMismatchedHelloPacketsRx 1.3.6.1.4.1.562.2.4.1.114.96.3.14.1.3
This attribute counts the total number of mismatched Hello packets received over this RCC. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfPnniRccBadHelloPacketsRx 1.3.6.1.4.1.562.2.4.1.114.96.3.14.1.4
This attribute counts the total number of bad Hello packets received over this RCC. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfPnniRccVcd 1.3.6.1.4.1.562.2.4.1.114.96.3.2
OBJECT IDENTIFIER    

atmIfPnniRccVcdRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.96.3.2.1
This entry controls the addition and deletion of atmIfPnniRccVcd components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccVcdRowStatusEntry

atmIfPnniRccVcdRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.2.1.1
A single entry in the table represents a single atmIfPnniRccVcd component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniRccVcdRowStatusEntry  

atmIfPnniRccVcdRowStatus 1.3.6.1.4.1.562.2.4.1.114.96.3.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfPnniRccVcd components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfPnniRccVcdComponentName 1.3.6.1.4.1.562.2.4.1.114.96.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfPnniRccVcdStorageType 1.3.6.1.4.1.562.2.4.1.114.96.3.2.1.1.4
This variable represents the storage type value for the atmIfPnniRccVcd tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfPnniRccVcdIndex 1.3.6.1.4.1.562.2.4.1.114.96.3.2.1.1.10
This variable represents the index for the atmIfPnniRccVcd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfPnniRccVcdProvTable 1.3.6.1.4.1.562.2.4.1.114.96.3.2.10
This group contains the provisionable traffic attributes for a control channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccVcdProvEntry

atmIfPnniRccVcdProvEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.2.10.1
An entry in the atmIfPnniRccVcdProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniRccVcdProvEntry  

atmIfPnniRccVcdTrafficDescType 1.3.6.1.4.1.562.2.4.1.114.96.3.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

atmIfPnniRccVcdAtmServiceCategory 1.3.6.1.4.1.562.2.4.1.114.96.3.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

atmIfPnniRccVcdQosClass 1.3.6.1.4.1.562.2.4.1.114.96.3.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

atmIfPnniRccVcdTrafficShaping 1.3.6.1.4.1.562.2.4.1.114.96.3.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfPnniRccVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.2.4.1.114.96.3.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

atmIfPnniRccVcdUsageParameterControl 1.3.6.1.4.1.562.2.4.1.114.96.3.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfPnniRccVcdTdpTable 1.3.6.1.4.1.562.2.4.1.114.96.3.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccVcdTdpEntry

atmIfPnniRccVcdTdpEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.2.387.1
An entry in the atmIfPnniRccVcdTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniRccVcdTdpEntry  

atmIfPnniRccVcdTdpIndex 1.3.6.1.4.1.562.2.4.1.114.96.3.2.387.1.1
This variable represents the atmIfPnniRccVcdTdpTable specific index for the atmIfPnniRccVcdTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..5  

atmIfPnniRccVcdTdpValue 1.3.6.1.4.1.562.2.4.1.114.96.3.2.387.1.2
This variable represents an individual value for the atmIfPnniRccVcdTdpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

atmIfPnniAddr 1.3.6.1.4.1.562.2.4.1.114.96.4
OBJECT IDENTIFIER    

atmIfPnniAddrRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.96.4.1
This entry controls the addition and deletion of atmIfPnniAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniAddrRowStatusEntry

atmIfPnniAddrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.96.4.1.1
A single entry in the table represents a single atmIfPnniAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniAddrRowStatusEntry  

atmIfPnniAddrRowStatus 1.3.6.1.4.1.562.2.4.1.114.96.4.1.1.1
This variable is used as the basis for SNMP naming of atmIfPnniAddr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfPnniAddrComponentName 1.3.6.1.4.1.562.2.4.1.114.96.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfPnniAddrStorageType 1.3.6.1.4.1.562.2.4.1.114.96.4.1.1.4
This variable represents the storage type value for the atmIfPnniAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfPnniAddrAddressIndex 1.3.6.1.4.1.562.2.4.1.114.96.4.1.1.10
This variable represents an index for the atmIfPnniAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..40)  

atmIfPnniAddrAddressTypeIndex 1.3.6.1.4.1.562.2.4.1.114.96.4.1.1.11
This variable represents an index for the atmIfPnniAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER primary(0), alternate(1), registered(2), default(3)  

atmIfPnniAddrOperTable 1.3.6.1.4.1.562.2.4.1.114.96.4.10
This attribute group contains the operational attributes for the Address component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniAddrOperEntry

atmIfPnniAddrOperEntry 1.3.6.1.4.1.562.2.4.1.114.96.4.10.1
An entry in the atmIfPnniAddrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniAddrOperEntry  

atmIfPnniAddrScope 1.3.6.1.4.1.562.2.4.1.114.96.4.10.1.1
This attribute indicates the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy. If no PnniInfo subcomponent has been provisioned, then the scope will default to the level of this node in the PNNI hierarchy. If this node does not participate in a PNNI hierarchy, then this attribute will have the value of -1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..104  

atmIfPnniAddrReachability 1.3.6.1.4.1.562.2.4.1.114.96.4.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

atmIfPnniAddrTermSP 1.3.6.1.4.1.562.2.4.1.114.96.4.2
OBJECT IDENTIFIER    

atmIfPnniAddrTermSPRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.96.4.2.1
This entry controls the addition and deletion of atmIfPnniAddrTermSP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniAddrTermSPRowStatusEntry

atmIfPnniAddrTermSPRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.96.4.2.1.1
A single entry in the table represents a single atmIfPnniAddrTermSP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniAddrTermSPRowStatusEntry  

atmIfPnniAddrTermSPRowStatus 1.3.6.1.4.1.562.2.4.1.114.96.4.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfPnniAddrTermSP components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfPnniAddrTermSPComponentName 1.3.6.1.4.1.562.2.4.1.114.96.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfPnniAddrTermSPStorageType 1.3.6.1.4.1.562.2.4.1.114.96.4.2.1.1.4
This variable represents the storage type value for the atmIfPnniAddrTermSP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfPnniAddrTermSPIndex 1.3.6.1.4.1.562.2.4.1.114.96.4.2.1.1.10
This variable represents the index for the atmIfPnniAddrTermSP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfPnniAddrPnniInfo 1.3.6.1.4.1.562.2.4.1.114.96.4.3
OBJECT IDENTIFIER    

atmIfPnniAddrPnniInfoRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.96.4.3.1
This entry controls the addition and deletion of atmIfPnniAddrPnniInfo components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniAddrPnniInfoRowStatusEntry

atmIfPnniAddrPnniInfoRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.96.4.3.1.1
A single entry in the table represents a single atmIfPnniAddrPnniInfo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniAddrPnniInfoRowStatusEntry  

atmIfPnniAddrPnniInfoRowStatus 1.3.6.1.4.1.562.2.4.1.114.96.4.3.1.1.1
This variable is used as the basis for SNMP naming of atmIfPnniAddrPnniInfo components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfPnniAddrPnniInfoComponentName 1.3.6.1.4.1.562.2.4.1.114.96.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfPnniAddrPnniInfoStorageType 1.3.6.1.4.1.562.2.4.1.114.96.4.3.1.1.4
This variable represents the storage type value for the atmIfPnniAddrPnniInfo tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfPnniAddrPnniInfoIndex 1.3.6.1.4.1.562.2.4.1.114.96.4.3.1.1.10
This variable represents the index for the atmIfPnniAddrPnniInfo tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfPnniAddrPnniInfoProvTable 1.3.6.1.4.1.562.2.4.1.114.96.4.3.10
This attribute group contains the provisioned attributes relating to PNNI for a PnniInfo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniAddrPnniInfoProvEntry

atmIfPnniAddrPnniInfoProvEntry 1.3.6.1.4.1.562.2.4.1.114.96.4.3.10.1
An entry in the atmIfPnniAddrPnniInfoProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfPnniAddrPnniInfoProvEntry  

atmIfPnniAddrPnniInfoScope 1.3.6.1.4.1.562.2.4.1.114.96.4.3.10.1.1
This attribute specifies the scope of the ATM address, which is the highest level up to which this address will be advertised in the PNNI hierarchy. The scope must be set to a value numerically less than or equal to the level of the lowest level peer group containing this node. Setting the scope to 0 will cause the address to be advertised globally within this PNNI routing domain.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1..104  

atmIfPnniAddrPnniInfoReachability 1.3.6.1.4.1.562.2.4.1.114.96.4.3.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

atmPnniGroup 1.3.6.1.4.1.562.2.4.2.72.1
OBJECT IDENTIFIER    

atmPnniGroupBE 1.3.6.1.4.1.562.2.4.2.72.1.5
OBJECT IDENTIFIER    

atmPnniGroupBE00 1.3.6.1.4.1.562.2.4.2.72.1.5.1
OBJECT IDENTIFIER    

atmPnniGroupBE00A 1.3.6.1.4.1.562.2.4.2.72.1.5.1.2
OBJECT IDENTIFIER    

atmPnniCapabilities 1.3.6.1.4.1.562.2.4.2.72.3
OBJECT IDENTIFIER    

atmPnniCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.72.3.5
OBJECT IDENTIFIER    

atmPnniCapabilitiesBE00 1.3.6.1.4.1.562.2.4.2.72.3.5.1
OBJECT IDENTIFIER    

atmPnniCapabilitiesBE00A 1.3.6.1.4.1.562.2.4.2.72.3.5.1.2
OBJECT IDENTIFIER