Nortel-Magellan-Passport-AtmNetworkingMIB

File: Nortel-Magellan-Passport-AtmNetworkingMIB.mib (191765 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-AtmCoreMIB

Imported symbols

OBJECT-TYPE components passportMIBs
Counter32 RowPointer DisplayString
StorageType RowStatus Gauge32
Integer32 Unsigned32 AsciiString
NonReplicated HexString FixedPoint1
AsciiStringIndex IntegerSequence atmIfVccIndex
atmIfVptIndex atmIfVcc atmIfVpcIndex
atmIfVpc atmIfVptVccIndex atmIfIndex
atmIfVptVcc

Defined Types

ARtgRowStatusEntry  
SEQUENCE    
  aRtgRowStatus RowStatus
  aRtgComponentName DisplayString
  aRtgStorageType StorageType
  aRtgIndex NonReplicated

ARtgStatsEntry  
SEQUENCE    
  aRtgRoutingAttempts Counter32
  aRtgFailedRoutingAttempts Counter32

ARtgDnaRowStatusEntry  
SEQUENCE    
  aRtgDnaRowStatus RowStatus
  aRtgDnaComponentName DisplayString
  aRtgDnaStorageType StorageType
  aRtgDnaIndex AsciiStringIndex

ARtgDnaDestInfoRowStatusEntry  
SEQUENCE    
  aRtgDnaDestInfoRowStatus RowStatus
  aRtgDnaDestInfoComponentName DisplayString
  aRtgDnaDestInfoStorageType StorageType
  aRtgDnaDestInfoIndex Integer32

ARtgDnaDestInfoOperEntry  
SEQUENCE    
  aRtgDnaDestInfoType INTEGER
  aRtgDnaDestInfoScope INTEGER
  aRtgDnaDestInfoStdComponentName RowPointer
  aRtgDnaDestInfoReachability INTEGER

ARtgPnniRowStatusEntry  
SEQUENCE    
  aRtgPnniRowStatus RowStatus
  aRtgPnniComponentName DisplayString
  aRtgPnniStorageType StorageType
  aRtgPnniIndex NonReplicated

ARtgPnniProvEntry  
SEQUENCE    
  aRtgPnniNodeAddressPrefix HexString
  aRtgPnniDefaultScope Unsigned32
  aRtgPnniDomain AsciiString
  aRtgPnniRestrictTransit INTEGER
  aRtgPnniMaxReroutesOnCrankback Unsigned32

ARtgPnniPglParmsEntry  
SEQUENCE    
  aRtgPnniPglInitTime Unsigned32
  aRtgPnniOverrideDelay Unsigned32
  aRtgPnniReElectionInterval Unsigned32

ARtgPnniHlParmsEntry  
SEQUENCE    
  aRtgPnniHelloHoldDown FixedPoint1
  aRtgPnniHelloInterval Unsigned32
  aRtgPnniHelloInactivityFactor Unsigned32

ARtgPnniPtseParmsEntry  
SEQUENCE    
  aRtgPnniPtseHoldDown FixedPoint1
  aRtgPnniPtseRefreshInterval Unsigned32
  aRtgPnniPtseLifetimeFactor Unsigned32
  aRtgPnniRequestRxmtInterval Unsigned32
  aRtgPnniPeerDelayedAckInterval FixedPoint1

ARtgPnniThreshParmsEntry  
SEQUENCE    
  aRtgPnniAvcrMt Unsigned32
  aRtgPnniAvcrPm Unsigned32

ARtgPnniOperEntry  
SEQUENCE    
  aRtgPnniTopologyMemoryExhaustion INTEGER

ARtgPnniStatsEntry  
SEQUENCE    
  aRtgPnniRoutingAttempts Counter32
  aRtgPnniFailedRoutingAttempts Counter32
  aRtgPnniCallsRerouted Counter32

ARtgPnniOptMetricEntry  
SEQUENCE    
  aRtgPnniOptMetricIndex INTEGER
  aRtgPnniOptMetricValue INTEGER

ARtgPnniRfRowStatusEntry  
SEQUENCE    
  aRtgPnniRfRowStatus RowStatus
  aRtgPnniRfComponentName DisplayString
  aRtgPnniRfStorageType StorageType
  aRtgPnniRfIndex NonReplicated

ARtgPnniRfCriteriaEntry  
SEQUENCE    
  aRtgPnniRfDestinationAddress HexString
  aRtgPnniRfMaxRoutes Unsigned32
  aRtgPnniRfTxTrafficDescType INTEGER
  aRtgPnniRfRxTrafficDescType INTEGER
  aRtgPnniRfAtmServiceCategory INTEGER
  aRtgPnniRfFwdQosClass INTEGER
  aRtgPnniRfBwdQosClass INTEGER
  aRtgPnniRfBearerClassBbc INTEGER
  aRtgPnniRfTransferCapabilityBbc INTEGER
  aRtgPnniRfClippingBbc INTEGER
  aRtgPnniRfBestEffort INTEGER
  aRtgPnniRfOptimizationMetric INTEGER

ARtgPnniRfRxTdpEntry  
SEQUENCE    
  aRtgPnniRfRxTdpIndex Integer32
  aRtgPnniRfRxTdpValue Unsigned32

ARtgPnniRfTxTdpEntry  
SEQUENCE    
  aRtgPnniRfTxTdpIndex Integer32
  aRtgPnniRfTxTdpValue Unsigned32

ARtgPnniRfFqpEntry  
SEQUENCE    
  aRtgPnniRfFqpIndex INTEGER
  aRtgPnniRfFqpValue Unsigned32

ARtgPnniRfBqpEntry  
SEQUENCE    
  aRtgPnniRfBqpIndex INTEGER
  aRtgPnniRfBqpValue Unsigned32

ARtgPnniCfgNodeRowStatusEntry  
SEQUENCE    
  aRtgPnniCfgNodeRowStatus RowStatus
  aRtgPnniCfgNodeComponentName DisplayString
  aRtgPnniCfgNodeStorageType StorageType
  aRtgPnniCfgNodeIndex Integer32

ARtgPnniCfgNodeProvEntry  
SEQUENCE    
  aRtgPnniCfgNodeNodeId HexString
  aRtgPnniCfgNodePeerGroupId HexString

ARtgPnniCfgNodeOperEntry  
SEQUENCE    
  aRtgPnniCfgNodeNodeAddress HexString
  aRtgPnniCfgNodeOpNodeId HexString
  aRtgPnniCfgNodeOpPeerGroupId HexString
  aRtgPnniCfgNodeNumNeighbors Unsigned32
  aRtgPnniCfgNodeNumRccs Unsigned32
  aRtgPnniCfgNodeCurrentLeadershipPriority Unsigned32
  aRtgPnniCfgNodePglElectionState INTEGER

ARtgPnniCfgNodeSAddrRowStatusEntry  
SEQUENCE    
  aRtgPnniCfgNodeSAddrRowStatus RowStatus
  aRtgPnniCfgNodeSAddrComponentName DisplayString
  aRtgPnniCfgNodeSAddrStorageType StorageType
  aRtgPnniCfgNodeSAddrAddressIndex HexString
  aRtgPnniCfgNodeSAddrPrefixLengthIndex Integer32
  aRtgPnniCfgNodeSAddrReachabilityIndex INTEGER

ARtgPnniCfgNodeSAddrProvEntry  
SEQUENCE    
  aRtgPnniCfgNodeSAddrSuppress INTEGER

ARtgPnniCfgNodeSAddrOperEntry  
SEQUENCE    
  aRtgPnniCfgNodeSAddrState INTEGER
  aRtgPnniCfgNodeSAddrScope INTEGER

ARtgPnniCfgNodeNbrRowStatusEntry  
SEQUENCE    
  aRtgPnniCfgNodeNbrRowStatus RowStatus
  aRtgPnniCfgNodeNbrComponentName DisplayString
  aRtgPnniCfgNodeNbrStorageType StorageType
  aRtgPnniCfgNodeNbrIndex HexString

ARtgPnniCfgNodeNbrOperEntry  
SEQUENCE    
  aRtgPnniCfgNodeNbrPeerState INTEGER

ARtgPnniCfgNodeNbrStatsEntry  
SEQUENCE    
  aRtgPnniCfgNodeNbrPtspRx Counter32
  aRtgPnniCfgNodeNbrPtspTx Counter32
  aRtgPnniCfgNodeNbrPtseRx Counter32
  aRtgPnniCfgNodeNbrPtseTx Counter32
  aRtgPnniCfgNodeNbrPtseReqRx Counter32
  aRtgPnniCfgNodeNbrPtseReqTx Counter32
  aRtgPnniCfgNodeNbrPtseAcksRx Counter32
  aRtgPnniCfgNodeNbrPtseAcksTx Counter32
  aRtgPnniCfgNodeNbrDbSummariesRx Counter32
  aRtgPnniCfgNodeNbrDbSummariesTx Counter32
  aRtgPnniCfgNodeNbrBadPtspRx Counter32
  aRtgPnniCfgNodeNbrBadPtseRx Counter32
  aRtgPnniCfgNodeNbrBadPtseReqRx Counter32
  aRtgPnniCfgNodeNbrBadPtseAckRx Counter32
  aRtgPnniCfgNodeNbrBadDbSummariesRx Counter32

ARtgPnniCfgNodeNbrRccListEntry  
SEQUENCE    
  aRtgPnniCfgNodeNbrRccListValue RowPointer

ARtgPnniCfgNodeDefSAddrRowStatusEntry  
SEQUENCE    
  aRtgPnniCfgNodeDefSAddrRowStatus RowStatus
  aRtgPnniCfgNodeDefSAddrComponentName DisplayString
  aRtgPnniCfgNodeDefSAddrStorageType StorageType
  aRtgPnniCfgNodeDefSAddrIndex NonReplicated

ARtgPnniCfgNodeDefSAddrDefAddrEntry  
SEQUENCE    
  aRtgPnniCfgNodeDefSAddrAddress HexString

ARtgPnniCfgNodeDefSAddrOperEntry  
SEQUENCE    
  aRtgPnniCfgNodeDefSAddrState INTEGER
  aRtgPnniCfgNodeDefSAddrScope INTEGER

ARtgPnniTopRowStatusEntry  
SEQUENCE    
  aRtgPnniTopRowStatus RowStatus
  aRtgPnniTopComponentName DisplayString
  aRtgPnniTopStorageType StorageType
  aRtgPnniTopIndex Integer32

ARtgPnniTopOperEntry  
SEQUENCE    
  aRtgPnniTopPtsesInDatabase Gauge32
  aRtgPnniTopPglNodeId HexString
  aRtgPnniTopActiveParentNodeId HexString
  aRtgPnniTopPreferredPglNodeId HexString

ARtgPnniTopNodeRowStatusEntry  
SEQUENCE    
  aRtgPnniTopNodeRowStatus RowStatus
  aRtgPnniTopNodeComponentName DisplayString
  aRtgPnniTopNodeStorageType StorageType
  aRtgPnniTopNodeIndex HexString

ARtgPnniTopNodeAddrRowStatusEntry  
SEQUENCE    
  aRtgPnniTopNodeAddrRowStatus RowStatus
  aRtgPnniTopNodeAddrComponentName DisplayString
  aRtgPnniTopNodeAddrStorageType StorageType
  aRtgPnniTopNodeAddrAddressIndex HexString
  aRtgPnniTopNodeAddrPrefixLengthIndex Integer32
  aRtgPnniTopNodeAddrReachabilityIndex INTEGER

ARtgPnniTopNodeAddrOperEntry  
SEQUENCE    
  aRtgPnniTopNodeAddrScope Unsigned32

ARtgPnniTopNodeLinkRowStatusEntry  
SEQUENCE    
  aRtgPnniTopNodeLinkRowStatus RowStatus
  aRtgPnniTopNodeLinkComponentName DisplayString
  aRtgPnniTopNodeLinkStorageType StorageType
  aRtgPnniTopNodeLinkIndex Integer32

ARtgPnniTopNodeLinkOperEntry  
SEQUENCE    
  aRtgPnniTopNodeLinkRemoteNodeId HexString
  aRtgPnniTopNodeLinkRemotePortId Unsigned32

ARtgPnniPortRowStatusEntry  
SEQUENCE    
  aRtgPnniPortRowStatus RowStatus
  aRtgPnniPortComponentName DisplayString
  aRtgPnniPortStorageType StorageType
  aRtgPnniPortIndex Integer32

ARtgPnniPortOperEntry  
SEQUENCE    
  aRtgPnniPortStdComponentName RowPointer

AtmCRRowStatusEntry  
SEQUENCE    
  atmCRRowStatus RowStatus
  atmCRComponentName DisplayString
  atmCRStorageType StorageType
  atmCRIndex NonReplicated

AtmCRProvEntry  
SEQUENCE    
  atmCRNodeAddress AsciiString

AtmCRStatsEntry  
SEQUENCE    
  atmCRCallsRouted Counter32
  atmCRCallsFailed Counter32

AtmCRDnaRowStatusEntry  
SEQUENCE    
  atmCRDnaRowStatus RowStatus
  atmCRDnaComponentName DisplayString
  atmCRDnaStorageType StorageType
  atmCRDnaIndex AsciiStringIndex

AtmCRDnaDestinationNameEntry  
SEQUENCE    
  atmCRDnaDestinationNameValue RowPointer

AtmIfVpcSrcRowStatusEntry  
SEQUENCE    
  atmIfVpcSrcRowStatus RowStatus
  atmIfVpcSrcComponentName DisplayString
  atmIfVpcSrcStorageType StorageType
  atmIfVpcSrcIndex NonReplicated

AtmIfVpcSrcProvEntry  
SEQUENCE    
  atmIfVpcSrcCallingAddress HexString
  atmIfVpcSrcCalledAddress HexString
  atmIfVpcSrcCalledVpi Unsigned32

AtmIfVpcSrcOperEntry  
SEQUENCE    
  atmIfVpcSrcState INTEGER
  atmIfVpcSrcRetryCount Counter32
  atmIfVpcSrcLastFailureCauseCode Unsigned32
  atmIfVpcSrcLastFailureDiagCode AsciiString

AtmIfVpcRpRowStatusEntry  
SEQUENCE    
  atmIfVpcRpRowStatus RowStatus
  atmIfVpcRpComponentName DisplayString
  atmIfVpcRpStorageType StorageType
  atmIfVpcRpIndex NonReplicated

AtmIfVpcRpOperEntry  
SEQUENCE    
  atmIfVpcRpNextHop RowPointer

AtmIfVpcRpNextHopsEntry  
SEQUENCE    
  atmIfVpcRpNextHopsValue RowPointer

AtmIfVpcDstRowStatusEntry  
SEQUENCE    
  atmIfVpcDstRowStatus RowStatus
  atmIfVpcDstComponentName DisplayString
  atmIfVpcDstStorageType StorageType
  atmIfVpcDstIndex NonReplicated

AtmIfVpcDstOperEntry  
SEQUENCE    
  atmIfVpcDstCalledAddress HexString
  atmIfVpcDstCallingAddress AsciiString
  atmIfVpcDstCallingVpi AsciiString

AtmIfVccSrcRowStatusEntry  
SEQUENCE    
  atmIfVccSrcRowStatus RowStatus
  atmIfVccSrcComponentName DisplayString
  atmIfVccSrcStorageType StorageType
  atmIfVccSrcIndex NonReplicated

AtmIfVccSrcProvEntry  
SEQUENCE    
  atmIfVccSrcRemoteAddress HexString
  atmIfVccSrcRemoteVpiVci IntegerSequence
  atmIfVccSrcCallingAddress HexString
  atmIfVccSrcCalledAddress HexString
  atmIfVccSrcCalledVpiVci IntegerSequence

AtmIfVccSrcOperEntry  
SEQUENCE    
  atmIfVccSrcState INTEGER
  atmIfVccSrcRetryCount Counter32
  atmIfVccSrcLastFailureCauseCode Unsigned32
  atmIfVccSrcLastFailureDiagCode AsciiString

AtmIfVccEpRowStatusEntry  
SEQUENCE    
  atmIfVccEpRowStatus RowStatus
  atmIfVccEpComponentName DisplayString
  atmIfVccEpStorageType StorageType
  atmIfVccEpIndex NonReplicated

AtmIfVccEpOperEntry  
SEQUENCE    
  atmIfVccEpApplicationName RowPointer

AtmIfVccRpRowStatusEntry  
SEQUENCE    
  atmIfVccRpRowStatus RowStatus
  atmIfVccRpComponentName DisplayString
  atmIfVccRpStorageType StorageType
  atmIfVccRpIndex NonReplicated

AtmIfVccRpOperEntry  
SEQUENCE    
  atmIfVccRpNextHop RowPointer

AtmIfVccRpNextHopsEntry  
SEQUENCE    
  atmIfVccRpNextHopsValue RowPointer

AtmIfVccDstRowStatusEntry  
SEQUENCE    
  atmIfVccDstRowStatus RowStatus
  atmIfVccDstComponentName DisplayString
  atmIfVccDstStorageType StorageType
  atmIfVccDstIndex NonReplicated

AtmIfVccDstOperEntry  
SEQUENCE    
  atmIfVccDstCalledAddress HexString
  atmIfVccDstCallingAddress AsciiString
  atmIfVccDstCallingVpiVci AsciiString

AtmIfVptVccSrcRowStatusEntry  
SEQUENCE    
  atmIfVptVccSrcRowStatus RowStatus
  atmIfVptVccSrcComponentName DisplayString
  atmIfVptVccSrcStorageType StorageType
  atmIfVptVccSrcIndex NonReplicated

AtmIfVptVccSrcProvEntry  
SEQUENCE    
  atmIfVptVccSrcRemoteAddress HexString
  atmIfVptVccSrcRemoteVpiVci IntegerSequence
  atmIfVptVccSrcCallingAddress HexString
  atmIfVptVccSrcCalledAddress HexString
  atmIfVptVccSrcCalledVpiVci IntegerSequence

AtmIfVptVccSrcOperEntry  
SEQUENCE    
  atmIfVptVccSrcState INTEGER
  atmIfVptVccSrcRetryCount Counter32
  atmIfVptVccSrcLastFailureCauseCode Unsigned32
  atmIfVptVccSrcLastFailureDiagCode AsciiString

AtmIfVptVccEpRowStatusEntry  
SEQUENCE    
  atmIfVptVccEpRowStatus RowStatus
  atmIfVptVccEpComponentName DisplayString
  atmIfVptVccEpStorageType StorageType
  atmIfVptVccEpIndex NonReplicated

AtmIfVptVccEpOperEntry  
SEQUENCE    
  atmIfVptVccEpApplicationName RowPointer

AtmIfVptVccRpRowStatusEntry  
SEQUENCE    
  atmIfVptVccRpRowStatus RowStatus
  atmIfVptVccRpComponentName DisplayString
  atmIfVptVccRpStorageType StorageType
  atmIfVptVccRpIndex NonReplicated

AtmIfVptVccRpOperEntry  
SEQUENCE    
  atmIfVptVccRpNextHop RowPointer

AtmIfVptVccRpNextHopsEntry  
SEQUENCE    
  atmIfVptVccRpNextHopsValue RowPointer

AtmIfVptVccDstRowStatusEntry  
SEQUENCE    
  atmIfVptVccDstRowStatus RowStatus
  atmIfVptVccDstComponentName DisplayString
  atmIfVptVccDstStorageType StorageType
  atmIfVptVccDstIndex NonReplicated

AtmIfVptVccDstOperEntry  
SEQUENCE    
  atmIfVptVccDstCalledAddress HexString
  atmIfVptVccDstCallingAddress AsciiString
  atmIfVptVccDstCallingVpiVci AsciiString

Defined Values

atmNetworkingMIB 1.3.6.1.4.1.562.2.4.2.42
OBJECT IDENTIFIER    

aRtg 1.3.6.1.4.1.562.2.4.1.95
OBJECT IDENTIFIER    

aRtgRowStatusTable 1.3.6.1.4.1.562.2.4.1.95.1
This entry controls the addition and deletion of aRtg components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgRowStatusEntry

aRtgRowStatusEntry 1.3.6.1.4.1.562.2.4.1.95.1.1
A single entry in the table represents a single aRtg component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgRowStatusEntry  

aRtgRowStatus 1.3.6.1.4.1.562.2.4.1.95.1.1.1
This variable is used as the basis for SNMP naming of aRtg components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

aRtgComponentName 1.3.6.1.4.1.562.2.4.1.95.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aRtgStorageType 1.3.6.1.4.1.562.2.4.1.95.1.1.4
This variable represents the storage type value for the aRtg tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

aRtgIndex 1.3.6.1.4.1.562.2.4.1.95.1.1.10
This variable represents the index for the aRtg tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

aRtgStatsTable 1.3.6.1.4.1.562.2.4.1.95.10
This group contains the statistical operational attributes of an ARtg component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgStatsEntry

aRtgStatsEntry 1.3.6.1.4.1.562.2.4.1.95.10.1
An entry in the aRtgStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgStatsEntry  

aRtgRoutingAttempts 1.3.6.1.4.1.562.2.4.1.95.10.1.1
This attribute counts the total number of calls routed. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgFailedRoutingAttempts 1.3.6.1.4.1.562.2.4.1.95.10.1.2
This attribute counts the total number of calls which were not successfully routed.The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgDna 1.3.6.1.4.1.562.2.4.1.95.2
OBJECT IDENTIFIER    

aRtgDnaRowStatusTable 1.3.6.1.4.1.562.2.4.1.95.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of aRtgDna components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgDnaRowStatusEntry

aRtgDnaRowStatusEntry 1.3.6.1.4.1.562.2.4.1.95.2.1.1
A single entry in the table represents a single aRtgDna component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgDnaRowStatusEntry  

aRtgDnaRowStatus 1.3.6.1.4.1.562.2.4.1.95.2.1.1.1
This variable is used as the basis for SNMP naming of aRtgDna components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

aRtgDnaComponentName 1.3.6.1.4.1.562.2.4.1.95.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aRtgDnaStorageType 1.3.6.1.4.1.562.2.4.1.95.2.1.1.4
This variable represents the storage type value for the aRtgDna tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

aRtgDnaIndex 1.3.6.1.4.1.562.2.4.1.95.2.1.1.10
This variable represents the index for the aRtgDna tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..40)  

aRtgDnaDestInfo 1.3.6.1.4.1.562.2.4.1.95.2.2
OBJECT IDENTIFIER    

aRtgDnaDestInfoRowStatusTable 1.3.6.1.4.1.562.2.4.1.95.2.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of aRtgDnaDestInfo components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgDnaDestInfoRowStatusEntry

aRtgDnaDestInfoRowStatusEntry 1.3.6.1.4.1.562.2.4.1.95.2.2.1.1
A single entry in the table represents a single aRtgDnaDestInfo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgDnaDestInfoRowStatusEntry  

aRtgDnaDestInfoRowStatus 1.3.6.1.4.1.562.2.4.1.95.2.2.1.1.1
This variable is used as the basis for SNMP naming of aRtgDnaDestInfo components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

aRtgDnaDestInfoComponentName 1.3.6.1.4.1.562.2.4.1.95.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aRtgDnaDestInfoStorageType 1.3.6.1.4.1.562.2.4.1.95.2.2.1.1.4
This variable represents the storage type value for the aRtgDnaDestInfo tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

aRtgDnaDestInfoIndex 1.3.6.1.4.1.562.2.4.1.95.2.2.1.1.10
This variable represents the index for the aRtgDnaDestInfo tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..50  

aRtgDnaDestInfoOperTable 1.3.6.1.4.1.562.2.4.1.95.2.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes for the DestInfo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgDnaDestInfoOperEntry

aRtgDnaDestInfoOperEntry 1.3.6.1.4.1.562.2.4.1.95.2.2.10.1
An entry in the aRtgDnaDestInfoOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgDnaDestInfoOperEntry  

aRtgDnaDestInfoType 1.3.6.1.4.1.562.2.4.1.95.2.2.10.1.1
This attribute indicates the type of the address at the destination interface. Provisioned addresses are assigned a type of primary or alternate; ATM routing will try primary routes and then the alternate routes if none of the primary routes succeed. The type registered is used for dynamic addresses registered through ILMI. The type default is used for Soft PVC addresses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER primary(0), alternate(1), registered(2), default(3)  

aRtgDnaDestInfoScope 1.3.6.1.4.1.562.2.4.1.95.2.2.10.1.2
This attribute indicates the highest level (meaning the lowest level number) in the hierarchy that the address will be advertised to. A value of -1 indicates that the scope is not applicable since this node has not been configured as a PNNI node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..104  

aRtgDnaDestInfoStdComponentName 1.3.6.1.4.1.562.2.4.1.95.2.2.10.1.3
This attribute represents a component name of the interface through which the address can be reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

aRtgDnaDestInfoReachability 1.3.6.1.4.1.562.2.4.1.95.2.2.10.1.4
This attribute indicates whether the address is internal or exterior.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

aRtgPnni 1.3.6.1.4.1.562.2.4.1.95.3
OBJECT IDENTIFIER    

aRtgPnniRowStatusTable 1.3.6.1.4.1.562.2.4.1.95.3.1
This entry controls the addition and deletion of aRtgPnni components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniRowStatusEntry

aRtgPnniRowStatusEntry 1.3.6.1.4.1.562.2.4.1.95.3.1.1
A single entry in the table represents a single aRtgPnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniRowStatusEntry  

aRtgPnniRowStatus 1.3.6.1.4.1.562.2.4.1.95.3.1.1.1
This variable is used as the basis for SNMP naming of aRtgPnni components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

aRtgPnniComponentName 1.3.6.1.4.1.562.2.4.1.95.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aRtgPnniStorageType 1.3.6.1.4.1.562.2.4.1.95.3.1.1.4
This variable represents the storage type value for the aRtgPnni tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

aRtgPnniIndex 1.3.6.1.4.1.562.2.4.1.95.3.1.1.10
This variable represents the index for the aRtgPnni tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

aRtgPnniProvTable 1.3.6.1.4.1.562.2.4.1.95.3.10
This group contains the generic provisionable attributes of a Pnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniProvEntry

aRtgPnniProvEntry 1.3.6.1.4.1.562.2.4.1.95.3.10.1
An entry in the aRtgPnniProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniProvEntry  

aRtgPnniNodeAddressPrefix 1.3.6.1.4.1.562.2.4.1.95.3.10.1.1
This attribute specifies the ATM address of this node. It allows the default node address to be overridden. If this attribute is set to the null string, then the default node address prefix is assumed, and computed as follows: the value provisioned for the ModuleData component's nodePrefix attribute, followed by a unique MAC address (6 octets).
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..19)  

aRtgPnniDefaultScope 1.3.6.1.4.1.562.2.4.1.95.3.10.1.2
This attribute specifies the default PNNI scope for ATM addresses associated with this node. The PNNI scope determines the level to which the address will be advertised within the PNNI routing domain. A provisioned Addr component may override the default scope in a PnniInfo subcomponent. A value of 0 means that all addresses which do not have provisioned scopes will be advertised globally within the PNNI routing domain. The value specified must be numerically smaller than or equal to that of the lowest level at which this node is configured in the PNNI hierarchy.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..104  

aRtgPnniDomain 1.3.6.1.4.1.562.2.4.1.95.3.10.1.3
This attribute specifies the routing domain name. This attribute should be set identically for all nodes in the same routing domain.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(1..32)  

aRtgPnniRestrictTransit 1.3.6.1.4.1.562.2.4.1.95.3.10.1.4
This attribute specifies if the node should restrict tandeming of SVCs. If this attribute is set to true, then other lowest level nodes in the PNNI hierarchy will avoid traversing this node during route computation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

aRtgPnniMaxReroutesOnCrankback 1.3.6.1.4.1.562.2.4.1.95.3.10.1.5
This attribute specifies the number of alternate routing attempts before a call requiring crank back is rejected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..20  

aRtgPnniPglParmsTable 1.3.6.1.4.1.562.2.4.1.95.3.11
This group contains the provisionable attributes for the peer group leader election timer parameters of a Pnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniPglParmsEntry

aRtgPnniPglParmsEntry 1.3.6.1.4.1.562.2.4.1.95.3.11.1
An entry in the aRtgPnniPglParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniPglParmsEntry  

aRtgPnniPglInitTime 1.3.6.1.4.1.562.2.4.1.95.3.11.1.1
This attribute specifies how long this node will delay advertising its choice of preferred peer group leader after having initialized operation and reached the full peer state with at least one neighbor in the peer group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

aRtgPnniOverrideDelay 1.3.6.1.4.1.562.2.4.1.95.3.11.1.2
This attribute specifies how long a node will wait for itself to be declared the preferred peer group leader by unanimous agreement among its peers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

aRtgPnniReElectionInterval 1.3.6.1.4.1.562.2.4.1.95.3.11.1.3
This attribute specifies how long this node will wait after losing connectivity to the current peer group leader before re-starting the process of electing a new peer group leader.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

aRtgPnniHlParmsTable 1.3.6.1.4.1.562.2.4.1.95.3.12
This group contains the default provisionable Hello protocol parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniHlParmsEntry

aRtgPnniHlParmsEntry 1.3.6.1.4.1.562.2.4.1.95.3.12.1
An entry in the aRtgPnniHlParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniHlParmsEntry  

aRtgPnniHelloHoldDown 1.3.6.1.4.1.562.2.4.1.95.3.12.1.1
This attribute is used to limit the rate at which this node sends out Hello packets. Specifically, it specifies the default minimum amount of time between successive Hellos used by routing control channels on this node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FixedPoint1 1..655350  

aRtgPnniHelloInterval 1.3.6.1.4.1.562.2.4.1.95.3.12.1.2
This attribute specifies the default duration of the Hello Timer in seconds for routing control channels on this node. Every helloInterval seconds, this node will send out a Hello packet to the neighbor node, subject to the helloHoldDown timer having expired at least once since the last Hello packet was sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

aRtgPnniHelloInactivityFactor 1.3.6.1.4.1.562.2.4.1.95.3.12.1.3
This attribute specifies the default number of Hello intervals allowed to pass without receiving a Hello from the neighbor node, before an attempt is made to re-stage, for routing control channels on this node. The hello inactivity timer is enabled in the oneWayInside, twoWayInside, oneWayOutside, twoWayOutside and commonOutside (see the helloState attribute on the Rcc component for a description of these states). Note that the value for the Hello interval used in the calculation is the one specified in the Hello packet from the neighbor node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

aRtgPnniPtseParmsTable 1.3.6.1.4.1.562.2.4.1.95.3.13
This group contains the provisionable attributes for the PTSE timer values of a Pnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniPtseParmsEntry

aRtgPnniPtseParmsEntry 1.3.6.1.4.1.562.2.4.1.95.3.13.1
An entry in the aRtgPnniPtseParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniPtseParmsEntry  

aRtgPnniPtseHoldDown 1.3.6.1.4.1.562.2.4.1.95.3.13.1.1
This attribute is used to limit the rate at which this node sends out PTSE packets. Specifically, it specifies the minimum amount of time in seconds that this node must wait between sending successive PTSE packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FixedPoint1 1..655350  

aRtgPnniPtseRefreshInterval 1.3.6.1.4.1.562.2.4.1.95.3.13.1.2
This attribute specifies the duration of the PTSE Timer. Every ptseRefreshInterval seconds, this node will send out a self- originated PTSE packet to the neighbor node, subject to the ptseHoldDown timer having expired at least once since the last PTSE packet was sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 300..65535  

aRtgPnniPtseLifetimeFactor 1.3.6.1.4.1.562.2.4.1.95.3.13.1.3
This attribute specifies the lifetime multiplier. The result of multiplying the ptseRefreshInterval by this value is used as the initial lifetime that this node places into PTSEs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 101..1000  

aRtgPnniRequestRxmtInterval 1.3.6.1.4.1.562.2.4.1.95.3.13.1.4
This attribute specifies the period between retransmissions of unacknowledged Database Summary packets, PTSE Request packets and PTSPs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

aRtgPnniPeerDelayedAckInterval 1.3.6.1.4.1.562.2.4.1.95.3.13.1.5
This attribute specifies the minimum amount of time between transmissions of delayed PTSE acknowledgment packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FixedPoint1 1..655350  

aRtgPnniThreshParmsTable 1.3.6.1.4.1.562.2.4.1.95.3.14
This group contains the provisionable attributes for the change thresholds of a ARtg Pnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniThreshParmsEntry

aRtgPnniThreshParmsEntry 1.3.6.1.4.1.562.2.4.1.95.3.14.1
An entry in the aRtgPnniThreshParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniThreshParmsEntry  

aRtgPnniAvcrMt 1.3.6.1.4.1.562.2.4.1.95.3.14.1.1
This attribute when multiplied by the Maximum Cell Rate specifies the minimum threshold used in the algorithms that determine significant change for average cell rate parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..99  

aRtgPnniAvcrPm 1.3.6.1.4.1.562.2.4.1.95.3.14.1.2
This attribute when multiplied by the current Available Cell Rate specifies the threshold used in the algorithms that determine significant change for AvCR parameters. If the resulting threshold is lower than minimum threshold, minimum threshold will be used. Increasing the value of the attribute increases the range of insignificance and reduces the amount of PTSP flooding due to changes in resource availability.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..99  

aRtgPnniOperTable 1.3.6.1.4.1.562.2.4.1.95.3.15
This group contains the generic operational attributes of an ARtg Pnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniOperEntry

aRtgPnniOperEntry 1.3.6.1.4.1.562.2.4.1.95.3.15.1
An entry in the aRtgPnniOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniOperEntry  

aRtgPnniTopologyMemoryExhaustion 1.3.6.1.4.1.562.2.4.1.95.3.15.1.2
This attribute indicates if the topology database is overloaded. A node goes into a database overload state when it fails to store the complete topology database due to insufficient memory in the node. A node in this state performs resynchronization periodically by restarting all its Neighbor Peer Finite State Machines. The node will stay in this state until it synchronizes with all of its neighbors without any overload problems. When this attribute is set an alarm will be issued.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

aRtgPnniStatsTable 1.3.6.1.4.1.562.2.4.1.95.3.16
This group contains the statistical operational attributes of a ARtg Pnni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniStatsEntry

aRtgPnniStatsEntry 1.3.6.1.4.1.562.2.4.1.95.3.16.1
An entry in the aRtgPnniStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniStatsEntry  

aRtgPnniRoutingAttempts 1.3.6.1.4.1.562.2.4.1.95.3.16.1.1
This attribute counts successful PNNI routing attempts. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniFailedRoutingAttempts 1.3.6.1.4.1.562.2.4.1.95.3.16.1.2
This attribute counts failed PNNI routing attempts. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniCallsRerouted 1.3.6.1.4.1.562.2.4.1.95.3.16.1.3
This attribute counts successful PNNI alternate routing attempts. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniOptMetricTable 1.3.6.1.4.1.562.2.4.1.95.3.386
This attribute is a vector that specifies the optimization metric for each ATM service category. The optimization metric is used during Generic Connection Admission Control (GCAC) route computation. Setting the value to cdv for a particular service category will cause GCAC to optimize for cell delay variation on call setups requiring that service category. Setting the value to maxCtd for a particular service category will cause GCAC to optimize for maximum cell transfer delay on call setups requiring that service category. Setting the value to aw for a particular service category will cause GCAC to optimize for administrative weight on call setups requiring that service category.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniOptMetricEntry

aRtgPnniOptMetricEntry 1.3.6.1.4.1.562.2.4.1.95.3.386.1
An entry in the aRtgPnniOptMetricTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniOptMetricEntry  

aRtgPnniOptMetricIndex 1.3.6.1.4.1.562.2.4.1.95.3.386.1.1
This variable represents the aRtgPnniOptMetricTable specific index for the aRtgPnniOptMetricTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER cbr(1), rtVbr(2), nrtVbr(3), ubr(4)  

aRtgPnniOptMetricValue 1.3.6.1.4.1.562.2.4.1.95.3.386.1.2
This variable represents an individual value for the aRtgPnniOptMetricTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cdv(0), maxCtd(1), aw(2)  

aRtgPnniRf 1.3.6.1.4.1.562.2.4.1.95.3.2
OBJECT IDENTIFIER    

aRtgPnniRfRowStatusTable 1.3.6.1.4.1.562.2.4.1.95.3.2.1
This entry controls the addition and deletion of aRtgPnniRf components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniRfRowStatusEntry

aRtgPnniRfRowStatusEntry 1.3.6.1.4.1.562.2.4.1.95.3.2.1.1
A single entry in the table represents a single aRtgPnniRf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniRfRowStatusEntry  

aRtgPnniRfRowStatus 1.3.6.1.4.1.562.2.4.1.95.3.2.1.1.1
This variable is used as the basis for SNMP naming of aRtgPnniRf components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

aRtgPnniRfComponentName 1.3.6.1.4.1.562.2.4.1.95.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aRtgPnniRfStorageType 1.3.6.1.4.1.562.2.4.1.95.3.2.1.1.4
This variable represents the storage type value for the aRtgPnniRf tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

aRtgPnniRfIndex 1.3.6.1.4.1.562.2.4.1.95.3.2.1.1.10
This variable represents the index for the aRtgPnniRf tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

aRtgPnniRfCriteriaTable 1.3.6.1.4.1.562.2.4.1.95.3.2.10
This group contains the attributes specifying the routing criteria for the route computation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniRfCriteriaEntry

aRtgPnniRfCriteriaEntry 1.3.6.1.4.1.562.2.4.1.95.3.2.10.1
An entry in the aRtgPnniRfCriteriaTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniRfCriteriaEntry  

aRtgPnniRfDestinationAddress 1.3.6.1.4.1.562.2.4.1.95.3.2.10.1.1
This attribute specifies the destination NSAP address to be used for the computation. If this attribute specifies an invalid address then no routes will be found.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(1..20)  

aRtgPnniRfMaxRoutes 1.3.6.1.4.1.562.2.4.1.95.3.2.10.1.2
This attribute specifies a ceiling on the number of routes to be computed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

aRtgPnniRfTxTrafficDescType 1.3.6.1.4.1.562.2.4.1.95.3.2.10.1.3
This attribute specifies the type of traffic management which is applied to the transmit direction as defined in the ATM Forum. The txTrafficDescType determines the number and meaning of the parameters in the txTrafficDescParm attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8)  

aRtgPnniRfRxTrafficDescType 1.3.6.1.4.1.562.2.4.1.95.3.2.10.1.5
This attribute specifies the type of traffic management which is applied to the receive direction of this connection as defined in the ATM Forum. The rxTrafficDescType determines the number and meaning of the parameters in the rxTrafficDescParm attribute When sameAsTx is selected, the rxTrafficDescType as well as the rxTrafficDescParm are taken from the transmit values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), sameAsTx(15)  

aRtgPnniRfAtmServiceCategory 1.3.6.1.4.1.562.2.4.1.95.3.2.10.1.6
This attribute specifies the ATM service category for both directions of the connection. If this attribute is set to derivedFromBBC, the Broadband Bearer Capability (BBC) and bestEffort attributes are used to determine the atmServiceCategory of this connection. If this attribute is set to other than derivedFromBBC, the value of this attribute is used to override the provisioned BBC IE parameters. In those cases, the BBC attributes are not used. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. VBR real time service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. VBR non-real time service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3), derivedFromBBC(15)  

aRtgPnniRfFwdQosClass 1.3.6.1.4.1.562.2.4.1.95.3.2.10.1.10
This attribute specifies the quality of service for the forward direction for this connection. Class 1 supports a QOS that will meet Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that will meet Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that will meet Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that will meet Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

aRtgPnniRfBwdQosClass 1.3.6.1.4.1.562.2.4.1.95.3.2.10.1.11
This attribute specifies the quality of service for the backward direction for this connection. Class 1 supports a QOS that will meet Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that will meet Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that will meet Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that will meet Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters. The sameAsFwd selection sets the backward quality of service to be the same as the forward quality of service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), sameAsFwd(15)  

aRtgPnniRfBearerClassBbc 1.3.6.1.4.1.562.2.4.1.95.3.2.10.1.12
This attribute specifies the bearer capability. It is one of the Broadband Bearer Capability (BBC) attributes. The purpose of the BBC information element is to indicate a requested broadband connection-oriented bearer service to be provided by the network. The value derivedFromServiceCategory specifies that the actual value which is used for this connection is derived from the value of the atmServiceCategory. Either, this attribute must be set to derivedFromServiceCategory, or the atmServiceCategory attribute must be set to derivedFromBBC, but not both. Class a service is a connection-oriented, constant bit rate ATM transport service. Class a service has end to end timing requirements and may require stringent cell loss, cell delay and cell delay variation performance.When a is set, the user is requesting more than an ATM only service. The network may look at the AAL to provide interworking based upon its contents. Class c service is a connection-oriented, variable bit rate ATM transport service. Class c service has no end-to-end timing requirements. When c is set, the user is requesting more than an ATM only service. The network interworking function may look at the AAL and provide service based on it. Class x service is a connection-oriented ATM transport service where the AAL, trafficType (vbr or cbr) and timing requirements are user defined (that is, transparent to the network).When x is set the user is requesting an ATM only service from the network. In this case, the network shall not process any higher layer protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER a(1), c(3), x(16), derivedFromServiceCategory(31)  

aRtgPnniRfTransferCapabilityBbc 1.3.6.1.4.1.562.2.4.1.95.3.2.10.1.13
This attribute specifies the transfer capability for this connection. Uni 3.0/3.1 traffic type and end-to-end timing parameters are mapped into this parameter as follows: 0 : NoIndication, NoIndication 1 : NoIndication, yes 2 : NoIndication, no 5 : CBR, yes 8 : VBR, NoIndication 9 : VBR, yes 10: VBR, no NotApplicable specifies that the user does not want to specify the transfer capability. The CBR traffic type refers to traffic offered on services such as a constant bit rate video service or a circuit emulation. The VBR traffic type refers to traffic offered on services such as packetized audio and video, or data. The value NoIndication for traffic type is used if the user has not set the traffic type; this is also the case for end-to-end timing. The value yes for end-to-end timing indicates that end-to-end timing is required. The value no for end-to-end timing indicates that end-to-end timing is not required. The value derivedFromServiceCategory specifies that the actual value which is used for this connection is derived from the value of the atmServiceCategory. Either, this attribute must be set to derivedFromServiceCategory, or the atmServiceCategory attribute must be set to derivedFromBBC, but not both.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n5(5), n8(8), n9(9), n10(10), notApplicable(30), derivedFromServiceCategory(31)  

aRtgPnniRfClippingBbc 1.3.6.1.4.1.562.2.4.1.95.3.2.10.1.14
This attribute specifies the value for the clipping susceptibility parameter in the BBC IE. This attribute is only used for SPVC connections. It is one of the Broadband Bearer Capability attributes. Clipping is an impairment in which the first fraction of a second of information to be transferred is lost. It occurs after a call is answered and before an associated connection is switched through.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

aRtgPnniRfBestEffort 1.3.6.1.4.1.562.2.4.1.95.3.2.10.1.15
This attribute specifies the value of the best effort parameter in the ATM Traffic Descriptor IE. It is one of the Broadband Bearer Capability attributes. The value indicated implies that the quality of service for this connection is not guaranteed. The value notIndicated implies that the quality of service for this connection is guaranteed. The value derivedFromServiceCategory specifies that the actual value which is used for this connection is derived from the value of the atmServiceCategory. Either, this attribute must be set to derivedFromServiceCategory, or the atmServiceCategory attribute must be set to derivedFromBBC, but not both. DESCRIPTION
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER indicated(0), notIndicated(1), derivedFromServiceCategory(15)  

aRtgPnniRfOptimizationMetric 1.3.6.1.4.1.562.2.4.1.95.3.2.10.1.16
This attribute specifies the optimization metric to be used in the route computation; one of cell delay variation (cdv), maximum cell transfer delay (maxCtd), or administrative weight (aw).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cdv(0), maxCtd(1), aw(2)  

aRtgPnniRfRxTdpTable 1.3.6.1.4.1.562.2.4.1.95.3.2.388
This attribute is a vector of four traffic parameters whose meanings are defined by the rxTrafficDescType attribute. The values of peak cell rate (PCR) and sustained cell rate (SCR) are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. The value of CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for usage parameter control (UPC). When rxTrafficDescType is 1 or 2, all of the parameters must be set to zero (unused). When rxTrafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic. Parameter 1 must be non-zero. Parameters 2 and 3 must be set to zero (unused). When rxTrafficDescType is 4, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell discard. Parameters 1 and 2 must be non-zero. Parameter 3 must be set to zero (unused). Parameter 1 must be greater than or equal to parameter 2. When rxTrafficDescType is 5, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell tagging. Parameters 1 and 2 must be non-zero. Parameter 3 must be set to zero (unused). Parameter 1 must be greater than or equal to parameter 2. When rxTrafficDescType is a 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic. Parameters 1, 2 and 3 must be non- zero. Parameter 1 must be greater than or equal to Parameter 2. When rxTrafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic. Parameters 1, 2 and 3 must be non- zero. Parameter 1 must be greater than or equal to parameter 2. When rxTrafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic. Parameter 1, 2 and 3 must be non- zero. Parameter 1 must be greater than or equal to parameter 2. When rxTrafficDescType is any value from 3 through 8, parameter 4 represents the CDVT. If this value is zero, the CDVT is taken from the ConnectionAdministrator defaults for the particular atmServiceCategory of this connection. When rxTrafficDescriptorType is 3 through 8, there are certain extreme combinations of rxTrafficDescParm which are outside the capabilities of the UPC hardware. To calculate the limits, use the following formulae: I1 = 1 000 000 000 / PCR L1 = CDVT * 1000 I2 = 1 000 000 000 / SCR L2 = CDVT + (MBS - 1) * (I2 - I1) I1 and I2 must be less than or equal to 335 523 840. I1 + L1 must be less than or equal to 1 342 156 800. I2 + L2 must be less than or equal to 1 342 156 800. Note that I2 and L2 only apply when the rxTrafficDescriptorType is 6 through 8. If the values of I1, L1, I2 or L2 are closer to the limits described above, a further restriction applies. Specifically, if either: I1 > 41 940 480 or I2 > 41 940 480 or I1 + L1 > 167 769 600 or I2 + L2 > 167 769 600 then both I1 and I2 must be greater than 20 480. Parameter 5 of the rxTrafficDescParm is always unused. If the rxTrafficDescType is sameAsTx, the values in this attribute will be taken from the txTrafficDescParm.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniRfRxTdpEntry

aRtgPnniRfRxTdpEntry 1.3.6.1.4.1.562.2.4.1.95.3.2.388.1
An entry in the aRtgPnniRfRxTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniRfRxTdpEntry  

aRtgPnniRfRxTdpIndex 1.3.6.1.4.1.562.2.4.1.95.3.2.388.1.1
This variable represents the aRtgPnniRfRxTdpTable specific index for the aRtgPnniRfRxTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..5  

aRtgPnniRfRxTdpValue 1.3.6.1.4.1.562.2.4.1.95.3.2.388.1.2
This variable represents an individual value for the aRtgPnniRfRxTdpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

aRtgPnniRfTxTdpTable 1.3.6.1.4.1.562.2.4.1.95.3.2.389
This attribute is a vector of five traffic parameters whose meanings are defined by the txTrafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When txTrafficDescType is 1 or 2, all of the parameters must be set to zero. When txTrafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When txTrafficDescType is 4, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic with cell discard; parameter 2 represents the PCR for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be greater than or equal to parameter 2. Parameters 1 and 2 must be non-zero. Parameter 3 must be zero. When txTrafficDescType is 5, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic with cell tagging; parameter 2 represents the PCR for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be greater than or equal to parameter 2. Parameters 1 and 2 must be non-zero. Parameter 3 must be zero. When txTrafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5, must either be zero (unused) or greater than or equal to parameter 2. When txTrafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5, must either be zero (unused) or greater than or equal to parameter 2. When txTrafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5, must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For txTrafficDescType 3, 4 and 5, the transmit traffic will be shaped at the next rate less than the PCR. For txTrafficDescType 6, 7 and 8, the transmit traffic will be shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic will be shaped at the next rate above the PCR.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniRfTxTdpEntry

aRtgPnniRfTxTdpEntry 1.3.6.1.4.1.562.2.4.1.95.3.2.389.1
An entry in the aRtgPnniRfTxTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniRfTxTdpEntry  

aRtgPnniRfTxTdpIndex 1.3.6.1.4.1.562.2.4.1.95.3.2.389.1.1
This variable represents the aRtgPnniRfTxTdpTable specific index for the aRtgPnniRfTxTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..5  

aRtgPnniRfTxTdpValue 1.3.6.1.4.1.562.2.4.1.95.3.2.389.1.2
This variable represents an individual value for the aRtgPnniRfTxTdpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

aRtgPnniRfFqpTable 1.3.6.1.4.1.562.2.4.1.95.3.2.390
This attribute is a vector of three elements that specify the quality of service parameters for the forward direction for this connection. This attribute is used for SPVC connections. The cdv element specifies the acceptable peak-to-peak Cell Delay Variation (CDV) of real-time connections (CBR, and rt-VBR). It is signalled through the extended QoS information element. The ctd specifies the acceptable maximum Cell Transfer Delay (maxCtd) of real-time connections (CBR, and rt-VBR). It is signalled through the end to end transit delay information element. The clr specifies the acceptable Cell Loss Ratio (CLR) of CBR, rt- VBR, and nrt-VBR connections. It is signalled through the extended QoS information element.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniRfFqpEntry

aRtgPnniRfFqpEntry 1.3.6.1.4.1.562.2.4.1.95.3.2.390.1
An entry in the aRtgPnniRfFqpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniRfFqpEntry  

aRtgPnniRfFqpIndex 1.3.6.1.4.1.562.2.4.1.95.3.2.390.1.1
This variable represents the aRtgPnniRfFqpTable specific index for the aRtgPnniRfFqpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER cdv(0), ctd(1), clr(2)  

aRtgPnniRfFqpValue 1.3.6.1.4.1.562.2.4.1.95.3.2.390.1.2
This variable represents an individual value for the aRtgPnniRfFqpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

aRtgPnniRfBqpTable 1.3.6.1.4.1.562.2.4.1.95.3.2.393
This attribute is a vector of three elements that specify the quality of service parameters for the backward direction for this connection. This attribute is used for SPVC connections. The cdv element specifies the acceptable peak-to-peak Cell Delay Variation (CDV) of real-time connections (CBR, and rt-VBR). It is signalled through the extended QoS information element. The ctd specifies the acceptable maximum Cell Transfer Delay (maxCtd) of real-time connections (CBR, and rt-VBR). It is signalled through the end to end transit delay information element. The clr specifies the acceptable Cell Loss Ratio (CLR) of CBR, rt- VBR, and nrt-VBR connections. It is signalled through the extended QoS information element.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniRfBqpEntry

aRtgPnniRfBqpEntry 1.3.6.1.4.1.562.2.4.1.95.3.2.393.1
An entry in the aRtgPnniRfBqpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniRfBqpEntry  

aRtgPnniRfBqpIndex 1.3.6.1.4.1.562.2.4.1.95.3.2.393.1.1
This variable represents the aRtgPnniRfBqpTable specific index for the aRtgPnniRfBqpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER cdv(0), ctd(1), clr(2)  

aRtgPnniRfBqpValue 1.3.6.1.4.1.562.2.4.1.95.3.2.393.1.2
This variable represents an individual value for the aRtgPnniRfBqpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

aRtgPnniCfgNode 1.3.6.1.4.1.562.2.4.1.95.3.3
OBJECT IDENTIFIER    

aRtgPnniCfgNodeRowStatusTable 1.3.6.1.4.1.562.2.4.1.95.3.3.1
This entry controls the addition and deletion of aRtgPnniCfgNode components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniCfgNodeRowStatusEntry

aRtgPnniCfgNodeRowStatusEntry 1.3.6.1.4.1.562.2.4.1.95.3.3.1.1
A single entry in the table represents a single aRtgPnniCfgNode component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniCfgNodeRowStatusEntry  

aRtgPnniCfgNodeRowStatus 1.3.6.1.4.1.562.2.4.1.95.3.3.1.1.1
This variable is used as the basis for SNMP naming of aRtgPnniCfgNode components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

aRtgPnniCfgNodeComponentName 1.3.6.1.4.1.562.2.4.1.95.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aRtgPnniCfgNodeStorageType 1.3.6.1.4.1.562.2.4.1.95.3.3.1.1.4
This variable represents the storage type value for the aRtgPnniCfgNode tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

aRtgPnniCfgNodeIndex 1.3.6.1.4.1.562.2.4.1.95.3.3.1.1.10
This variable represents the index for the aRtgPnniCfgNode tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..104  

aRtgPnniCfgNodeProvTable 1.3.6.1.4.1.562.2.4.1.95.3.3.10
This group contains the provisionable attributes of a ConfiguredNode component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniCfgNodeProvEntry

aRtgPnniCfgNodeProvEntry 1.3.6.1.4.1.562.2.4.1.95.3.3.10.1
An entry in the aRtgPnniCfgNodeProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniCfgNodeProvEntry  

aRtgPnniCfgNodeNodeId 1.3.6.1.4.1.562.2.4.1.95.3.3.10.1.2
This attribute specifies the node id of the configured node. If this attribute is set to null, then the node id is computed as follows: If this is the lowest configured node, then the node id is computed as the level (one octet), followed by the integer value 160 (one octet), followed by the node address (20 octets). If this is not the lowest configured node, then the node id is computed as the level (one octet), followed by the 14 octet peer group id of the child peer group which the LGN represents, followed by the ESI specified in the node address (6 octets), followed by the integer value 0 (one octet).
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..22)  

aRtgPnniCfgNodePeerGroupId 1.3.6.1.4.1.562.2.4.1.95.3.3.10.1.3
This attribute allows the peer group id of the Logical Group Node (LGN) to be set. The peer group id is specified by 28 hex digits where the first octet represents the level of the node and the remaining 13 octets form the End System Address. If this attribute is set to the null string then the peer group id is computed as follows: The peer group id for a lowest level node is computed to be the node's level (one octet), followed by the first bits of the node's address, followed by zero or more padding 0 bits. The peer group id for an LGN is computed to be the LGN's level (one octet), followed by the first bits of the id of the peer group which this LGN represents.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..14)  

aRtgPnniCfgNodeOperTable 1.3.6.1.4.1.562.2.4.1.95.3.3.11
This group contains the generic operational attributes of a ConfiguredNode component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniCfgNodeOperEntry

aRtgPnniCfgNodeOperEntry 1.3.6.1.4.1.562.2.4.1.95.3.3.11.1
An entry in the aRtgPnniCfgNodeOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniCfgNodeOperEntry  

aRtgPnniCfgNodeNodeAddress 1.3.6.1.4.1.562.2.4.1.95.3.3.11.1.1
This attribute indicates the address of the node at this level. At the lowest level, the nodeAddress is determined by the value of the nodeAddressPrefix attribute for the ARtg Pnni component followed by the level of this CfgNode. For LGNs, the nodeAddress is the same as the nodeAddress of the node at the lowest level, with the selector field set to the level of the peer group containing the LGN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(20)  

aRtgPnniCfgNodeOpNodeId 1.3.6.1.4.1.562.2.4.1.95.3.3.11.1.2
This attribute indicates the node id of the node at this level. The default node id is computed as follows: If this is the lowest level node, then the default node id is computed as the level (one octet), followed by the integer value 160 (one octet), followed by the node address (20 octets). If this is not the lowest level node, then the default node id is computed as the level (one octet), followed by the 14 octet peer group id of the child peer group which the LGN represents, followed by the ESI specified in the node address (6 octets), followed by the integer value 0 (one octet).
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(22)  

aRtgPnniCfgNodeOpPeerGroupId 1.3.6.1.4.1.562.2.4.1.95.3.3.11.1.3
This attribute indicates the peer group id of the node at this level. The value is determined by the provisioned peerGroupId attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(14)  

aRtgPnniCfgNodeNumNeighbors 1.3.6.1.4.1.562.2.4.1.95.3.3.11.1.4
This attribute indicates the number of PNNI nodes which are neighbors of this node at this level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

aRtgPnniCfgNodeNumRccs 1.3.6.1.4.1.562.2.4.1.95.3.3.11.1.5
This attribute indicates the number of Routing Control Channels to this node's neighbors at this level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

aRtgPnniCfgNodeCurrentLeadershipPriority 1.3.6.1.4.1.562.2.4.1.95.3.3.11.1.6
This attribute indicates the leadership priority of the node that this node believes should be the peer group leader at this point in time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..205  

aRtgPnniCfgNodePglElectionState 1.3.6.1.4.1.562.2.4.1.95.3.3.11.1.7
This attribute indicates the current state of the peer group leader election process. The following are the possible values for this attribute: starting: the initial state of the state machine. awaiting: the node has started the Hello Finite State Machine on at least one link, and no peer has been found yet. awaitingFull: no database synchronization process has been completed yet but at least one neighboring peer has been found. initialDelay: Database synchronization has been completed with at least one neighboring peer. The node must wait pglInitTime second before it can select and advertise its preferred Peer Group Leader (PGL). calculating: the node is in the process of calculating what its new choice for preferred PGL will be. operNotPgl: a non PGL node is in the process of determining which node has the highest priority to be PGL by examining PTSEs sent by other nodes. operPgl: a PGL node is in the process of determining if another node has a higher priority than itself by examining PTSEs sent by other nodes. awaitUnanimity: the node has chosen itself as PGL. If the node has been elected unanimously, it generates a Unanimity event. It waits for unanimity or expiration of the overrideDelay timer before declaring itself peer group leader. hungElection: the node has chosen itself as PGL with less than 2/3 of the other nodes advertising it as their preferred PGL. In this case either this node should change its choice of preferred PGL, or the other nodes are going to accept it as PGL. awaitReElection: the node has lost connectivity to the current PGL. The connectivity must be reestablished before the reElectionInterval timer fires, otherwise the election is redone.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER starting(0), awaiting(1), awaitingFull(2), initialDelay(3), calculating(4), operNotPgl(5), operPgl(6), awaitUnanimity(7), hungElection(8), awaitReElection(9)  

aRtgPnniCfgNodeSAddr 1.3.6.1.4.1.562.2.4.1.95.3.3.2
OBJECT IDENTIFIER    

aRtgPnniCfgNodeSAddrRowStatusTable 1.3.6.1.4.1.562.2.4.1.95.3.3.2.1
This entry controls the addition and deletion of aRtgPnniCfgNodeSAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniCfgNodeSAddrRowStatusEntry

aRtgPnniCfgNodeSAddrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.95.3.3.2.1.1
A single entry in the table represents a single aRtgPnniCfgNodeSAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniCfgNodeSAddrRowStatusEntry  

aRtgPnniCfgNodeSAddrRowStatus 1.3.6.1.4.1.562.2.4.1.95.3.3.2.1.1.1
This variable is used as the basis for SNMP naming of aRtgPnniCfgNodeSAddr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

aRtgPnniCfgNodeSAddrComponentName 1.3.6.1.4.1.562.2.4.1.95.3.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aRtgPnniCfgNodeSAddrStorageType 1.3.6.1.4.1.562.2.4.1.95.3.3.2.1.1.4
This variable represents the storage type value for the aRtgPnniCfgNodeSAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

aRtgPnniCfgNodeSAddrAddressIndex 1.3.6.1.4.1.562.2.4.1.95.3.3.2.1.1.10
This variable represents an index for the aRtgPnniCfgNodeSAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HexString Size(19)  

aRtgPnniCfgNodeSAddrPrefixLengthIndex 1.3.6.1.4.1.562.2.4.1.95.3.3.2.1.1.11
This variable represents an index for the aRtgPnniCfgNodeSAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..152  

aRtgPnniCfgNodeSAddrReachabilityIndex 1.3.6.1.4.1.562.2.4.1.95.3.3.2.1.1.12
This variable represents an index for the aRtgPnniCfgNodeSAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

aRtgPnniCfgNodeSAddrProvTable 1.3.6.1.4.1.562.2.4.1.95.3.3.2.10
This group contains the provisionable attributes of a SummaryAddress component. A summary address is an abbreviation of a set of addresses, represented by an address prefix that all of the summarized addresses have in common. A suppressed summary address is used to suppress the advertisement of addresses which match this prefix, regardless of scope.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniCfgNodeSAddrProvEntry

aRtgPnniCfgNodeSAddrProvEntry 1.3.6.1.4.1.562.2.4.1.95.3.3.2.10.1
An entry in the aRtgPnniCfgNodeSAddrProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniCfgNodeSAddrProvEntry  

aRtgPnniCfgNodeSAddrSuppress 1.3.6.1.4.1.562.2.4.1.95.3.3.2.10.1.2
This attribute specifies whether or not the address should be suppressed. If this attribute is set to true, then all addresses matching that prefix will not be advertised above this level.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

aRtgPnniCfgNodeSAddrOperTable 1.3.6.1.4.1.562.2.4.1.95.3.3.2.11
This group contains the operational attributes of a SummaryAddress component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniCfgNodeSAddrOperEntry

aRtgPnniCfgNodeSAddrOperEntry 1.3.6.1.4.1.562.2.4.1.95.3.3.2.11.1
An entry in the aRtgPnniCfgNodeSAddrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniCfgNodeSAddrOperEntry  

aRtgPnniCfgNodeSAddrState 1.3.6.1.4.1.562.2.4.1.95.3.3.2.11.1.1
This attribute indicates the state of the address: one of advertising, suppressing or inactive. inactive: the summary address has been configured but is not suppressing or summarizing any ATM addresses. suppressing: the summary address has suppressed at least one ATM address on the node. advertising: the summary address is summarizing at least one ATM address on the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER advertising(0), suppressing(1), inactive(2)  

aRtgPnniCfgNodeSAddrScope 1.3.6.1.4.1.562.2.4.1.95.3.3.2.11.1.2
This attribute indicates the scope of the summary address. The scope corresponds to the scope of the underlying summarized address with the highest advertised scope. A value of -1 means the scope is unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..104  

aRtgPnniCfgNodeNbr 1.3.6.1.4.1.562.2.4.1.95.3.3.3
OBJECT IDENTIFIER    

aRtgPnniCfgNodeNbrRowStatusTable 1.3.6.1.4.1.562.2.4.1.95.3.3.3.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of aRtgPnniCfgNodeNbr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniCfgNodeNbrRowStatusEntry

aRtgPnniCfgNodeNbrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.95.3.3.3.1.1
A single entry in the table represents a single aRtgPnniCfgNodeNbr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniCfgNodeNbrRowStatusEntry  

aRtgPnniCfgNodeNbrRowStatus 1.3.6.1.4.1.562.2.4.1.95.3.3.3.1.1.1
This variable is used as the basis for SNMP naming of aRtgPnniCfgNodeNbr components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

aRtgPnniCfgNodeNbrComponentName 1.3.6.1.4.1.562.2.4.1.95.3.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aRtgPnniCfgNodeNbrStorageType 1.3.6.1.4.1.562.2.4.1.95.3.3.3.1.1.4
This variable represents the storage type value for the aRtgPnniCfgNodeNbr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

aRtgPnniCfgNodeNbrIndex 1.3.6.1.4.1.562.2.4.1.95.3.3.3.1.1.10
This variable represents the index for the aRtgPnniCfgNodeNbr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HexString Size(22)  

aRtgPnniCfgNodeNbrOperTable 1.3.6.1.4.1.562.2.4.1.95.3.3.3.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of a Neighbor component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniCfgNodeNbrOperEntry

aRtgPnniCfgNodeNbrOperEntry 1.3.6.1.4.1.562.2.4.1.95.3.3.3.10.1
An entry in the aRtgPnniCfgNodeNbrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniCfgNodeNbrOperEntry  

aRtgPnniCfgNodeNbrPeerState 1.3.6.1.4.1.562.2.4.1.95.3.3.3.10.1.2
This attribute indicates the state of the routing database exchange with the peer node. npDown: there are no active links (i.e. in the twoWayInside Hello state) to the neighboring peer. negotiating: the first step in creating an adjacency between the two neighboring peers; this step determines which node is the master, and what the initial DS sequence number will be. exchanging: the node describes its topology database by sending Database Summary packets to the neighboring peer. loading: a full sequence of Database Summary packets has been exchanged with the neighboring peer, and the required PTSEs are requested and at least one has not yet been received. full: All PTSEs known to be available have been received from the neighboring peer. At this point the all ports leading to the neighbor node will be flooded in PTSEs within the peer group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER npDown(0), negotiating(1), exchanging(2), loading(3), full(4)  

aRtgPnniCfgNodeNbrStatsTable 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the statistical operational attributes of a Neighbor component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniCfgNodeNbrStatsEntry

aRtgPnniCfgNodeNbrStatsEntry 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11.1
An entry in the aRtgPnniCfgNodeNbrStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniCfgNodeNbrStatsEntry  

aRtgPnniCfgNodeNbrPtspRx 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11.1.1
This attribute counts the PNNI Topology State Packets received from the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniCfgNodeNbrPtspTx 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11.1.2
This attribute counts the total number of PTSPs send to the neighbor node.The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniCfgNodeNbrPtseRx 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11.1.3
This attribute counts the total number of PTSEs received from the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniCfgNodeNbrPtseTx 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11.1.4
This attribute counts the total number of PTSEs sent to the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniCfgNodeNbrPtseReqRx 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11.1.5
This attribute counts the total number of PTSE requests received from the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniCfgNodeNbrPtseReqTx 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11.1.6
This attribute counts the total number of PTSE requests sent to the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniCfgNodeNbrPtseAcksRx 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11.1.7
This attribute counts the total number of PTSE acknowledgments received from the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniCfgNodeNbrPtseAcksTx 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11.1.8
This attribute counts the total number of PTSE acknowledgments sent to the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniCfgNodeNbrDbSummariesRx 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11.1.9
This attribute counts the number of database summary packets received from the neighbor. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniCfgNodeNbrDbSummariesTx 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11.1.10
This attribute counts the number of database summary packets transmitted to the neighbor. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniCfgNodeNbrBadPtspRx 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11.1.11
This attribute counts the total number of invalid PTSP packets received from the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniCfgNodeNbrBadPtseRx 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11.1.12
This attribute counts the total number of invalid PTSE packets received to the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniCfgNodeNbrBadPtseReqRx 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11.1.13
This attribute counts the total number of invalid PTSE requests received from the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniCfgNodeNbrBadPtseAckRx 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11.1.14
This attribute counts the total number of invalid PTSE acknowledgments received from the neighbor node. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniCfgNodeNbrBadDbSummariesRx 1.3.6.1.4.1.562.2.4.1.95.3.3.3.11.1.15
This attribute counts the total number of invalid database summary packets received from the neighbor. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

aRtgPnniCfgNodeNbrRccListTable 1.3.6.1.4.1.562.2.4.1.95.3.3.3.385
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates the component names of all Routing Control Channels to the neighbor PNNI node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniCfgNodeNbrRccListEntry

aRtgPnniCfgNodeNbrRccListEntry 1.3.6.1.4.1.562.2.4.1.95.3.3.3.385.1
An entry in the aRtgPnniCfgNodeNbrRccListTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniCfgNodeNbrRccListEntry  

aRtgPnniCfgNodeNbrRccListValue 1.3.6.1.4.1.562.2.4.1.95.3.3.3.385.1.1
This variable represents both the value and the index for the aRtgPnniCfgNodeNbrRccListTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

aRtgPnniCfgNodeDefSAddr 1.3.6.1.4.1.562.2.4.1.95.3.3.4
OBJECT IDENTIFIER    

aRtgPnniCfgNodeDefSAddrRowStatusTable 1.3.6.1.4.1.562.2.4.1.95.3.3.4.1
This entry controls the addition and deletion of aRtgPnniCfgNodeDefSAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniCfgNodeDefSAddrRowStatusEntry

aRtgPnniCfgNodeDefSAddrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.95.3.3.4.1.1
A single entry in the table represents a single aRtgPnniCfgNodeDefSAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniCfgNodeDefSAddrRowStatusEntry  

aRtgPnniCfgNodeDefSAddrRowStatus 1.3.6.1.4.1.562.2.4.1.95.3.3.4.1.1.1
This variable is used as the basis for SNMP naming of aRtgPnniCfgNodeDefSAddr components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

aRtgPnniCfgNodeDefSAddrComponentName 1.3.6.1.4.1.562.2.4.1.95.3.3.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aRtgPnniCfgNodeDefSAddrStorageType 1.3.6.1.4.1.562.2.4.1.95.3.3.4.1.1.4
This variable represents the storage type value for the aRtgPnniCfgNodeDefSAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

aRtgPnniCfgNodeDefSAddrIndex 1.3.6.1.4.1.562.2.4.1.95.3.3.4.1.1.10
This variable represents the index for the aRtgPnniCfgNodeDefSAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

aRtgPnniCfgNodeDefSAddrDefAddrTable 1.3.6.1.4.1.562.2.4.1.95.3.3.4.10
This group contains the operational attributes of a DefSummaryAddress component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniCfgNodeDefSAddrDefAddrEntry

aRtgPnniCfgNodeDefSAddrDefAddrEntry 1.3.6.1.4.1.562.2.4.1.95.3.3.4.10.1
An entry in the aRtgPnniCfgNodeDefSAddrDefAddrTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniCfgNodeDefSAddrDefAddrEntry  

aRtgPnniCfgNodeDefSAddrAddress 1.3.6.1.4.1.562.2.4.1.95.3.3.4.10.1.1
This attribute indicates the default summary address of the node at this level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(13)  

aRtgPnniCfgNodeDefSAddrOperTable 1.3.6.1.4.1.562.2.4.1.95.3.3.4.11
This group contains the operational attributes of a SummaryAddress component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniCfgNodeDefSAddrOperEntry

aRtgPnniCfgNodeDefSAddrOperEntry 1.3.6.1.4.1.562.2.4.1.95.3.3.4.11.1
An entry in the aRtgPnniCfgNodeDefSAddrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniCfgNodeDefSAddrOperEntry  

aRtgPnniCfgNodeDefSAddrState 1.3.6.1.4.1.562.2.4.1.95.3.3.4.11.1.1
This attribute indicates the state of the address: one of advertising, suppressing or inactive. inactive: the summary address has been configured but is not suppressing or summarizing any ATM addresses. suppressing: the summary address has suppressed at least one ATM address on the node. advertising: the summary address is summarizing at least one ATM address on the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER advertising(0), suppressing(1), inactive(2)  

aRtgPnniCfgNodeDefSAddrScope 1.3.6.1.4.1.562.2.4.1.95.3.3.4.11.1.2
This attribute indicates the scope of the summary address. The scope corresponds to the scope of the underlying summarized address with the highest advertised scope. A value of -1 means the scope is unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..104  

aRtgPnniTop 1.3.6.1.4.1.562.2.4.1.95.3.4
OBJECT IDENTIFIER    

aRtgPnniTopRowStatusTable 1.3.6.1.4.1.562.2.4.1.95.3.4.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of aRtgPnniTop components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniTopRowStatusEntry

aRtgPnniTopRowStatusEntry 1.3.6.1.4.1.562.2.4.1.95.3.4.1.1
A single entry in the table represents a single aRtgPnniTop component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniTopRowStatusEntry  

aRtgPnniTopRowStatus 1.3.6.1.4.1.562.2.4.1.95.3.4.1.1.1
This variable is used as the basis for SNMP naming of aRtgPnniTop components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

aRtgPnniTopComponentName 1.3.6.1.4.1.562.2.4.1.95.3.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aRtgPnniTopStorageType 1.3.6.1.4.1.562.2.4.1.95.3.4.1.1.4
This variable represents the storage type value for the aRtgPnniTop tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

aRtgPnniTopIndex 1.3.6.1.4.1.562.2.4.1.95.3.4.1.1.10
This variable represents the index for the aRtgPnniTop tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..104  

aRtgPnniTopOperTable 1.3.6.1.4.1.562.2.4.1.95.3.4.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of a Topology component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniTopOperEntry

aRtgPnniTopOperEntry 1.3.6.1.4.1.562.2.4.1.95.3.4.10.1
An entry in the aRtgPnniTopOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniTopOperEntry  

aRtgPnniTopPtsesInDatabase 1.3.6.1.4.1.562.2.4.1.95.3.4.10.1.1
This attribute indicates the number of PTSEs in storage in this node's topology database for this level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

aRtgPnniTopPglNodeId 1.3.6.1.4.1.562.2.4.1.95.3.4.10.1.2
This attribute indicates the node id of the peer group leader. If this attribute is empty, it indicates the Peer Group Level node id is unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(0..22)  

aRtgPnniTopActiveParentNodeId 1.3.6.1.4.1.562.2.4.1.95.3.4.10.1.3
This attribute indicates the node identifier being used by the LGN representing this peer group at the next higher level peer group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(0..22)  

aRtgPnniTopPreferredPglNodeId 1.3.6.1.4.1.562.2.4.1.95.3.4.10.1.4
This attribute represents the node in database with the highest Peer Group Level (PGL) priority. If this attribute is empty, it indicates the preferred PGL node id is unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(0..22)  

aRtgPnniTopNode 1.3.6.1.4.1.562.2.4.1.95.3.4.2
OBJECT IDENTIFIER    

aRtgPnniTopNodeRowStatusTable 1.3.6.1.4.1.562.2.4.1.95.3.4.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of aRtgPnniTopNode components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniTopNodeRowStatusEntry

aRtgPnniTopNodeRowStatusEntry 1.3.6.1.4.1.562.2.4.1.95.3.4.2.1.1
A single entry in the table represents a single aRtgPnniTopNode component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniTopNodeRowStatusEntry  

aRtgPnniTopNodeRowStatus 1.3.6.1.4.1.562.2.4.1.95.3.4.2.1.1.1
This variable is used as the basis for SNMP naming of aRtgPnniTopNode components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

aRtgPnniTopNodeComponentName 1.3.6.1.4.1.562.2.4.1.95.3.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aRtgPnniTopNodeStorageType 1.3.6.1.4.1.562.2.4.1.95.3.4.2.1.1.4
This variable represents the storage type value for the aRtgPnniTopNode tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

aRtgPnniTopNodeIndex 1.3.6.1.4.1.562.2.4.1.95.3.4.2.1.1.10
This variable represents the index for the aRtgPnniTopNode tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HexString Size(22)  

aRtgPnniTopNodeAddr 1.3.6.1.4.1.562.2.4.1.95.3.4.2.2
OBJECT IDENTIFIER    

aRtgPnniTopNodeAddrRowStatusTable 1.3.6.1.4.1.562.2.4.1.95.3.4.2.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of aRtgPnniTopNodeAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniTopNodeAddrRowStatusEntry

aRtgPnniTopNodeAddrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.95.3.4.2.2.1.1
A single entry in the table represents a single aRtgPnniTopNodeAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniTopNodeAddrRowStatusEntry  

aRtgPnniTopNodeAddrRowStatus 1.3.6.1.4.1.562.2.4.1.95.3.4.2.2.1.1.1
This variable is used as the basis for SNMP naming of aRtgPnniTopNodeAddr components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

aRtgPnniTopNodeAddrComponentName 1.3.6.1.4.1.562.2.4.1.95.3.4.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aRtgPnniTopNodeAddrStorageType 1.3.6.1.4.1.562.2.4.1.95.3.4.2.2.1.1.4
This variable represents the storage type value for the aRtgPnniTopNodeAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

aRtgPnniTopNodeAddrAddressIndex 1.3.6.1.4.1.562.2.4.1.95.3.4.2.2.1.1.10
This variable represents an index for the aRtgPnniTopNodeAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HexString Size(19)  

aRtgPnniTopNodeAddrPrefixLengthIndex 1.3.6.1.4.1.562.2.4.1.95.3.4.2.2.1.1.11
This variable represents an index for the aRtgPnniTopNodeAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..152  

aRtgPnniTopNodeAddrReachabilityIndex 1.3.6.1.4.1.562.2.4.1.95.3.4.2.2.1.1.12
This variable represents an index for the aRtgPnniTopNodeAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

aRtgPnniTopNodeAddrOperTable 1.3.6.1.4.1.562.2.4.1.95.3.4.2.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute group contains the operational attributes for the Address component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniTopNodeAddrOperEntry

aRtgPnniTopNodeAddrOperEntry 1.3.6.1.4.1.562.2.4.1.95.3.4.2.2.10.1
An entry in the aRtgPnniTopNodeAddrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniTopNodeAddrOperEntry  

aRtgPnniTopNodeAddrScope 1.3.6.1.4.1.562.2.4.1.95.3.4.2.2.10.1.1
This attribute specifies the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..104  


aRtgPnniTopNodeLinkRowStatusTable 1.3.6.1.4.1.562.2.4.1.95.3.4.2.3.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of aRtgPnniTopNodeLink components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniTopNodeLinkRowStatusEntry

aRtgPnniTopNodeLinkRowStatusEntry 1.3.6.1.4.1.562.2.4.1.95.3.4.2.3.1.1
A single entry in the table represents a single aRtgPnniTopNodeLink component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniTopNodeLinkRowStatusEntry  

aRtgPnniTopNodeLinkRowStatus 1.3.6.1.4.1.562.2.4.1.95.3.4.2.3.1.1.1
This variable is used as the basis for SNMP naming of aRtgPnniTopNodeLink components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

aRtgPnniTopNodeLinkComponentName 1.3.6.1.4.1.562.2.4.1.95.3.4.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aRtgPnniTopNodeLinkStorageType 1.3.6.1.4.1.562.2.4.1.95.3.4.2.3.1.1.4
This variable represents the storage type value for the aRtgPnniTopNodeLink tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

aRtgPnniTopNodeLinkIndex 1.3.6.1.4.1.562.2.4.1.95.3.4.2.3.1.1.10
This variable represents the index for the aRtgPnniTopNodeLink tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..268435455  

aRtgPnniTopNodeLinkOperTable 1.3.6.1.4.1.562.2.4.1.95.3.4.2.3.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of a Link component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniTopNodeLinkOperEntry

aRtgPnniTopNodeLinkOperEntry 1.3.6.1.4.1.562.2.4.1.95.3.4.2.3.10.1
An entry in the aRtgPnniTopNodeLinkOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniTopNodeLinkOperEntry  

aRtgPnniTopNodeLinkRemoteNodeId 1.3.6.1.4.1.562.2.4.1.95.3.4.2.3.10.1.1
This attribute indicates the id of the node at the far end of this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(22)  

aRtgPnniTopNodeLinkRemotePortId 1.3.6.1.4.1.562.2.4.1.95.3.4.2.3.10.1.2
This attribute indicates the node's port id at the far end of this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

aRtgPnniPort 1.3.6.1.4.1.562.2.4.1.95.3.5
OBJECT IDENTIFIER    

aRtgPnniPortRowStatusTable 1.3.6.1.4.1.562.2.4.1.95.3.5.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of aRtgPnniPort components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniPortRowStatusEntry

aRtgPnniPortRowStatusEntry 1.3.6.1.4.1.562.2.4.1.95.3.5.1.1
A single entry in the table represents a single aRtgPnniPort component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniPortRowStatusEntry  

aRtgPnniPortRowStatus 1.3.6.1.4.1.562.2.4.1.95.3.5.1.1.1
This variable is used as the basis for SNMP naming of aRtgPnniPort components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

aRtgPnniPortComponentName 1.3.6.1.4.1.562.2.4.1.95.3.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aRtgPnniPortStorageType 1.3.6.1.4.1.562.2.4.1.95.3.5.1.1.4
This variable represents the storage type value for the aRtgPnniPort tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

aRtgPnniPortIndex 1.3.6.1.4.1.562.2.4.1.95.3.5.1.1.10
This variable represents the index for the aRtgPnniPort tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..268435455  

aRtgPnniPortOperTable 1.3.6.1.4.1.562.2.4.1.95.3.5.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of a Port component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ARtgPnniPortOperEntry

aRtgPnniPortOperEntry 1.3.6.1.4.1.562.2.4.1.95.3.5.10.1
An entry in the aRtgPnniPortOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ARtgPnniPortOperEntry  

aRtgPnniPortStdComponentName 1.3.6.1.4.1.562.2.4.1.95.3.5.10.1.1
This attribute indicates the component name of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

atmCR 1.3.6.1.4.1.562.2.4.1.113
OBJECT IDENTIFIER    

atmCRRowStatusTable 1.3.6.1.4.1.562.2.4.1.113.1
This entry controls the addition and deletion of atmCR components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmCRRowStatusEntry

atmCRRowStatusEntry 1.3.6.1.4.1.562.2.4.1.113.1.1
A single entry in the table represents a single atmCR component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmCRRowStatusEntry  

atmCRRowStatus 1.3.6.1.4.1.562.2.4.1.113.1.1.1
This variable is used as the basis for SNMP naming of atmCR components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmCRComponentName 1.3.6.1.4.1.562.2.4.1.113.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmCRStorageType 1.3.6.1.4.1.562.2.4.1.113.1.1.4
This variable represents the storage type value for the atmCR tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmCRIndex 1.3.6.1.4.1.562.2.4.1.113.1.1.10
This variable represents the index for the atmCR tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmCRProvTable 1.3.6.1.4.1.562.2.4.1.113.10
This group represents the provisioned attributes for the AtmCallRouter component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmCRProvEntry

atmCRProvEntry 1.3.6.1.4.1.562.2.4.1.113.10.1
An entry in the atmCRProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmCRProvEntry  

atmCRNodeAddress 1.3.6.1.4.1.562.2.4.1.113.10.1.1
This attribute specifies the NSAP address prefix used for ILMI purposes.
Status: obsolete Access: read-write
OBJECT-TYPE    
  AsciiString Size(26)  

atmCRStatsTable 1.3.6.1.4.1.562.2.4.1.113.11
This group represents the operational attributes for the AtmCallRouter component.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmCRStatsEntry

atmCRStatsEntry 1.3.6.1.4.1.562.2.4.1.113.11.1
An entry in the atmCRStatsTable.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  AtmCRStatsEntry  

atmCRCallsRouted 1.3.6.1.4.1.562.2.4.1.113.11.1.1
This attribute counts the total number of calls routed.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

atmCRCallsFailed 1.3.6.1.4.1.562.2.4.1.113.11.1.2
This attribute specifies the number of calls that failed to route.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

atmCRDna 1.3.6.1.4.1.562.2.4.1.113.2
OBJECT IDENTIFIER    

atmCRDnaRowStatusTable 1.3.6.1.4.1.562.2.4.1.113.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of atmCRDna components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmCRDnaRowStatusEntry

atmCRDnaRowStatusEntry 1.3.6.1.4.1.562.2.4.1.113.2.1.1
A single entry in the table represents a single atmCRDna component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmCRDnaRowStatusEntry  

atmCRDnaRowStatus 1.3.6.1.4.1.562.2.4.1.113.2.1.1.1
This variable is used as the basis for SNMP naming of atmCRDna components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

atmCRDnaComponentName 1.3.6.1.4.1.562.2.4.1.113.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmCRDnaStorageType 1.3.6.1.4.1.562.2.4.1.113.2.1.1.4
This variable represents the storage type value for the atmCRDna tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmCRDnaIndex 1.3.6.1.4.1.562.2.4.1.113.2.1.1.10
This variable represents the index for the atmCRDna tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..40)  

atmCRDnaDestinationNameTable 1.3.6.1.4.1.562.2.4.1.113.2.289
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute indicates which components have this address provisioned or dynamically registered via ILMI.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmCRDnaDestinationNameEntry

atmCRDnaDestinationNameEntry 1.3.6.1.4.1.562.2.4.1.113.2.289.1
An entry in the atmCRDnaDestinationNameTable.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  AtmCRDnaDestinationNameEntry  

atmCRDnaDestinationNameValue 1.3.6.1.4.1.562.2.4.1.113.2.289.1.1
This variable represents both the value and the index for the atmCRDnaDestinationNameTable.
Status: obsolete Access: read-only
OBJECT-TYPE    
  RowPointer  

atmIfVpcSrc 1.3.6.1.4.1.562.2.4.1.114.4.6
OBJECT IDENTIFIER    

atmIfVpcSrcRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.4.6.1
This entry controls the addition and deletion of atmIfVpcSrc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVpcSrcRowStatusEntry

atmIfVpcSrcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.4.6.1.1
A single entry in the table represents a single atmIfVpcSrc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVpcSrcRowStatusEntry  

atmIfVpcSrcRowStatus 1.3.6.1.4.1.562.2.4.1.114.4.6.1.1.1
This variable is used as the basis for SNMP naming of atmIfVpcSrc components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfVpcSrcComponentName 1.3.6.1.4.1.562.2.4.1.114.4.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVpcSrcStorageType 1.3.6.1.4.1.562.2.4.1.114.4.6.1.1.4
This variable represents the storage type value for the atmIfVpcSrc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVpcSrcIndex 1.3.6.1.4.1.562.2.4.1.114.4.6.1.1.10
This variable represents the index for the atmIfVpcSrc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVpcSrcProvTable 1.3.6.1.4.1.562.2.4.1.114.4.6.10
This attribute group contains the provisionable attributes of the AtmIf/n Vpc/vpi SrcPvp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVpcSrcProvEntry

atmIfVpcSrcProvEntry 1.3.6.1.4.1.562.2.4.1.114.4.6.10.1
An entry in the atmIfVpcSrcProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVpcSrcProvEntry  

atmIfVpcSrcCallingAddress 1.3.6.1.4.1.562.2.4.1.114.4.6.10.1.1
This attribute specifies the calling address of the soft PVP. If it is a null string, then the calling address is the address of the current interface (that is, where the soft PVC originates).
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..20)  

atmIfVpcSrcCalledAddress 1.3.6.1.4.1.562.2.4.1.114.4.6.10.1.2
This attribute specifies the called (remote) address of the soft PVP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(20)  

atmIfVpcSrcCalledVpi 1.3.6.1.4.1.562.2.4.1.114.4.6.10.1.3
This attribute specifies the called VPI of the soft PVP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4095  

atmIfVpcSrcOperTable 1.3.6.1.4.1.562.2.4.1.114.4.6.11
This attribute group contains the operational attributes associated with the SrcPvp or SrcPvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVpcSrcOperEntry

atmIfVpcSrcOperEntry 1.3.6.1.4.1.562.2.4.1.114.4.6.11.1
An entry in the atmIfVpcSrcOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVpcSrcOperEntry  

atmIfVpcSrcState 1.3.6.1.4.1.562.2.4.1.114.4.6.11.1.1
This attribute indicates the state of the soft PVP or soft PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(0), inactive(1)  

atmIfVpcSrcRetryCount 1.3.6.1.4.1.562.2.4.1.114.4.6.11.1.2
This attribute indicates the number of failed attempts to set up the soft PVP or soft PVC since the last time the connection failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVpcSrcLastFailureCauseCode 1.3.6.1.4.1.562.2.4.1.114.4.6.11.1.3
This attribute contains the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages. The default value for this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVpcSrcLastFailureDiagCode 1.3.6.1.4.1.562.2.4.1.114.4.6.11.1.4
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to NULL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..8)  

atmIfVpcRp 1.3.6.1.4.1.562.2.4.1.114.4.7
OBJECT IDENTIFIER    

atmIfVpcRpRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.4.7.1
This entry controls the addition and deletion of atmIfVpcRp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVpcRpRowStatusEntry

atmIfVpcRpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.4.7.1.1
A single entry in the table represents a single atmIfVpcRp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVpcRpRowStatusEntry  

atmIfVpcRpRowStatus 1.3.6.1.4.1.562.2.4.1.114.4.7.1.1.1
This variable is used as the basis for SNMP naming of atmIfVpcRp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

atmIfVpcRpComponentName 1.3.6.1.4.1.562.2.4.1.114.4.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVpcRpStorageType 1.3.6.1.4.1.562.2.4.1.114.4.7.1.1.4
This variable represents the storage type value for the atmIfVpcRp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVpcRpIndex 1.3.6.1.4.1.562.2.4.1.114.4.7.1.1.10
This variable represents the index for the atmIfVpcRp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVpcRpOperTable 1.3.6.1.4.1.562.2.4.1.114.4.7.10
This attribute group contains the operational attributes for the AtmRelayPoint component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVpcRpOperEntry

atmIfVpcRpOperEntry 1.3.6.1.4.1.562.2.4.1.114.4.7.10.1
An entry in the atmIfVpcRpOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVpcRpOperEntry  

atmIfVpcRpNextHop 1.3.6.1.4.1.562.2.4.1.114.4.7.10.1.1
This attribute indicates the component name of the Rp component with which this Rp component is associated.
Status: obsolete Access: read-only
OBJECT-TYPE    
  RowPointer  

atmIfVpcRpNextHopsTable 1.3.6.1.4.1.562.2.4.1.114.4.7.430
This attribute indicates the component name(s) of the Rp component(s) with which this Rp component is associated. This attribute can have more than one component name only when the Vcc distributionType is pointToMultipoint and the callDirection is fromLink.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVpcRpNextHopsEntry

atmIfVpcRpNextHopsEntry 1.3.6.1.4.1.562.2.4.1.114.4.7.430.1
An entry in the atmIfVpcRpNextHopsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVpcRpNextHopsEntry  

atmIfVpcRpNextHopsValue 1.3.6.1.4.1.562.2.4.1.114.4.7.430.1.1
This variable represents both the value and the index for the atmIfVpcRpNextHopsTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

atmIfVpcDst 1.3.6.1.4.1.562.2.4.1.114.4.8
OBJECT IDENTIFIER    

atmIfVpcDstRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.4.8.1
This entry controls the addition and deletion of atmIfVpcDst components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVpcDstRowStatusEntry

atmIfVpcDstRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.4.8.1.1
A single entry in the table represents a single atmIfVpcDst component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVpcDstRowStatusEntry  

atmIfVpcDstRowStatus 1.3.6.1.4.1.562.2.4.1.114.4.8.1.1.1
This variable is used as the basis for SNMP naming of atmIfVpcDst components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

atmIfVpcDstComponentName 1.3.6.1.4.1.562.2.4.1.114.4.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVpcDstStorageType 1.3.6.1.4.1.562.2.4.1.114.4.8.1.1.4
This variable represents the storage type value for the atmIfVpcDst tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVpcDstIndex 1.3.6.1.4.1.562.2.4.1.114.4.8.1.1.10
This variable represents the index for the atmIfVpcDst tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVpcDstOperTable 1.3.6.1.4.1.562.2.4.1.114.4.8.10
This attribute group contains the operational attributes for the AtmIf/n Vpc/vpi DstPvp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVpcDstOperEntry

atmIfVpcDstOperEntry 1.3.6.1.4.1.562.2.4.1.114.4.8.10.1
An entry in the atmIfVpcDstOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVpcDstOperEntry  

atmIfVpcDstCalledAddress 1.3.6.1.4.1.562.2.4.1.114.4.8.10.1.1
This attribute indicates the called address of the soft PVP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(20)  

atmIfVpcDstCallingAddress 1.3.6.1.4.1.562.2.4.1.114.4.8.10.1.2
This attribute indicates the calling (remote) address of the soft PVP. If the address in not known, then the value of this address is Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(7..40)  

atmIfVpcDstCallingVpi 1.3.6.1.4.1.562.2.4.1.114.4.8.10.1.3
This attribute represents the calling (remote) VPI of the soft PVP. If the VPI value is not known, the attribute value is set to Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..7)  

atmIfVccSrc 1.3.6.1.4.1.562.2.4.1.114.5.8
OBJECT IDENTIFIER    

atmIfVccSrcRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.5.8.1
This entry controls the addition and deletion of atmIfVccSrc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVccSrcRowStatusEntry

atmIfVccSrcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.5.8.1.1
A single entry in the table represents a single atmIfVccSrc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVccSrcRowStatusEntry  

atmIfVccSrcRowStatus 1.3.6.1.4.1.562.2.4.1.114.5.8.1.1.1
This variable is used as the basis for SNMP naming of atmIfVccSrc components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfVccSrcComponentName 1.3.6.1.4.1.562.2.4.1.114.5.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVccSrcStorageType 1.3.6.1.4.1.562.2.4.1.114.5.8.1.1.4
This variable represents the storage type value for the atmIfVccSrc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVccSrcIndex 1.3.6.1.4.1.562.2.4.1.114.5.8.1.1.10
This variable represents the index for the atmIfVccSrc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVccSrcProvTable 1.3.6.1.4.1.562.2.4.1.114.5.8.10
This attribute group contains the provisionable attributes of the SourcePvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVccSrcProvEntry

atmIfVccSrcProvEntry 1.3.6.1.4.1.562.2.4.1.114.5.8.10.1
An entry in the atmIfVccSrcProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVccSrcProvEntry  

atmIfVccSrcRemoteAddress 1.3.6.1.4.1.562.2.4.1.114.5.8.10.1.1
This attribute represents the remote address of the soft PVC.
Status: obsolete Access: read-write
OBJECT-TYPE    
  HexString Size(20)  

atmIfVccSrcRemoteVpiVci 1.3.6.1.4.1.562.2.4.1.114.5.8.10.1.2
This attribute represents the remote VPI and VCI of the soft PVC.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IntegerSequence Size(3..9)  

atmIfVccSrcCallingAddress 1.3.6.1.4.1.562.2.4.1.114.5.8.10.1.3
This attribute represents the calling address of the soft PVC. If it is a null string, then the calling address is the address of the current interface (that is, where the soft PVC originates).
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..20)  

atmIfVccSrcCalledAddress 1.3.6.1.4.1.562.2.4.1.114.5.8.10.1.4
This attribute represents the called (remote) address of the soft PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(20)  

atmIfVccSrcCalledVpiVci 1.3.6.1.4.1.562.2.4.1.114.5.8.10.1.5
This attribute represents the remote VPI and VCI of the soft PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IntegerSequence Size(3..10)  

atmIfVccSrcOperTable 1.3.6.1.4.1.562.2.4.1.114.5.8.11
This attribute group contains the operational attributes associated with the SrcPvp or SrcPvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVccSrcOperEntry

atmIfVccSrcOperEntry 1.3.6.1.4.1.562.2.4.1.114.5.8.11.1
An entry in the atmIfVccSrcOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVccSrcOperEntry  

atmIfVccSrcState 1.3.6.1.4.1.562.2.4.1.114.5.8.11.1.1
This attribute indicates the state of the soft PVP or soft PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(0), inactive(1)  

atmIfVccSrcRetryCount 1.3.6.1.4.1.562.2.4.1.114.5.8.11.1.2
This attribute indicates the number of failed attempts to set up the soft PVP or soft PVC since the last time the connection failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVccSrcLastFailureCauseCode 1.3.6.1.4.1.562.2.4.1.114.5.8.11.1.3
This attribute contains the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages. The default value for this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVccSrcLastFailureDiagCode 1.3.6.1.4.1.562.2.4.1.114.5.8.11.1.4
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to NULL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..8)  

atmIfVccEp 1.3.6.1.4.1.562.2.4.1.114.5.9
OBJECT IDENTIFIER    

atmIfVccEpRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.5.9.1
This entry controls the addition and deletion of atmIfVccEp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVccEpRowStatusEntry

atmIfVccEpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.5.9.1.1
A single entry in the table represents a single atmIfVccEp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVccEpRowStatusEntry  

atmIfVccEpRowStatus 1.3.6.1.4.1.562.2.4.1.114.5.9.1.1.1
This variable is used as the basis for SNMP naming of atmIfVccEp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

atmIfVccEpComponentName 1.3.6.1.4.1.562.2.4.1.114.5.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVccEpStorageType 1.3.6.1.4.1.562.2.4.1.114.5.9.1.1.4
This variable represents the storage type value for the atmIfVccEp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVccEpIndex 1.3.6.1.4.1.562.2.4.1.114.5.9.1.1.10
This variable represents the index for the atmIfVccEp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVccEpOperTable 1.3.6.1.4.1.562.2.4.1.114.5.9.10
This attribute group contains the operational attributes for the AtmEndPoint component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVccEpOperEntry

atmIfVccEpOperEntry 1.3.6.1.4.1.562.2.4.1.114.5.9.10.1
An entry in the atmIfVccEpOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVccEpOperEntry  

atmIfVccEpApplicationName 1.3.6.1.4.1.562.2.4.1.114.5.9.10.1.1
This attribute indicates the component name associated with the application associated with the switched VCC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

atmIfVccRp 1.3.6.1.4.1.562.2.4.1.114.5.10
OBJECT IDENTIFIER    

atmIfVccRpRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.5.10.1
This entry controls the addition and deletion of atmIfVccRp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVccRpRowStatusEntry

atmIfVccRpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.5.10.1.1
A single entry in the table represents a single atmIfVccRp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVccRpRowStatusEntry  

atmIfVccRpRowStatus 1.3.6.1.4.1.562.2.4.1.114.5.10.1.1.1
This variable is used as the basis for SNMP naming of atmIfVccRp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

atmIfVccRpComponentName 1.3.6.1.4.1.562.2.4.1.114.5.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVccRpStorageType 1.3.6.1.4.1.562.2.4.1.114.5.10.1.1.4
This variable represents the storage type value for the atmIfVccRp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVccRpIndex 1.3.6.1.4.1.562.2.4.1.114.5.10.1.1.10
This variable represents the index for the atmIfVccRp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVccRpOperTable 1.3.6.1.4.1.562.2.4.1.114.5.10.10
This attribute group contains the operational attributes for the AtmRelayPoint component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVccRpOperEntry

atmIfVccRpOperEntry 1.3.6.1.4.1.562.2.4.1.114.5.10.10.1
An entry in the atmIfVccRpOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVccRpOperEntry  

atmIfVccRpNextHop 1.3.6.1.4.1.562.2.4.1.114.5.10.10.1.1
This attribute indicates the component name of the Rp component with which this Rp component is associated.
Status: obsolete Access: read-only
OBJECT-TYPE    
  RowPointer  

atmIfVccRpNextHopsTable 1.3.6.1.4.1.562.2.4.1.114.5.10.430
This attribute indicates the component name(s) of the Rp component(s) with which this Rp component is associated. This attribute can have more than one component name only when the Vcc distributionType is pointToMultipoint and the callDirection is fromLink.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVccRpNextHopsEntry

atmIfVccRpNextHopsEntry 1.3.6.1.4.1.562.2.4.1.114.5.10.430.1
An entry in the atmIfVccRpNextHopsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVccRpNextHopsEntry  

atmIfVccRpNextHopsValue 1.3.6.1.4.1.562.2.4.1.114.5.10.430.1.1
This variable represents both the value and the index for the atmIfVccRpNextHopsTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

atmIfVccDst 1.3.6.1.4.1.562.2.4.1.114.5.11
OBJECT IDENTIFIER    

atmIfVccDstRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.5.11.1
This entry controls the addition and deletion of atmIfVccDst components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVccDstRowStatusEntry

atmIfVccDstRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.5.11.1.1
A single entry in the table represents a single atmIfVccDst component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVccDstRowStatusEntry  

atmIfVccDstRowStatus 1.3.6.1.4.1.562.2.4.1.114.5.11.1.1.1
This variable is used as the basis for SNMP naming of atmIfVccDst components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

atmIfVccDstComponentName 1.3.6.1.4.1.562.2.4.1.114.5.11.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVccDstStorageType 1.3.6.1.4.1.562.2.4.1.114.5.11.1.1.4
This variable represents the storage type value for the atmIfVccDst tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVccDstIndex 1.3.6.1.4.1.562.2.4.1.114.5.11.1.1.10
This variable represents the index for the atmIfVccDst tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVccDstOperTable 1.3.6.1.4.1.562.2.4.1.114.5.11.10
This attribute group contains the operational attributes for the DestinationPvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVccDstOperEntry

atmIfVccDstOperEntry 1.3.6.1.4.1.562.2.4.1.114.5.11.10.1
An entry in the atmIfVccDstOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVccDstOperEntry  

atmIfVccDstCalledAddress 1.3.6.1.4.1.562.2.4.1.114.5.11.10.1.3
This attribute represents the called address of the soft PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(20)  

atmIfVccDstCallingAddress 1.3.6.1.4.1.562.2.4.1.114.5.11.10.1.4
This attribute represents the remote address of the soft PVC. If the address in not known, then the value of this address is Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(7..40)  

atmIfVccDstCallingVpiVci 1.3.6.1.4.1.562.2.4.1.114.5.11.10.1.5
This attribute represents the remote VPI and VCI of the soft PVC. If the VPI and VCI values are not known, this attribute is set to Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(7..9)  

atmIfVptVccSrc 1.3.6.1.4.1.562.2.4.1.114.9.20.8
OBJECT IDENTIFIER    

atmIfVptVccSrcRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.20.8.1
This entry controls the addition and deletion of atmIfVptVccSrc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptVccSrcRowStatusEntry

atmIfVptVccSrcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.20.8.1.1
A single entry in the table represents a single atmIfVptVccSrc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptVccSrcRowStatusEntry  

atmIfVptVccSrcRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.20.8.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptVccSrc components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfVptVccSrcComponentName 1.3.6.1.4.1.562.2.4.1.114.9.20.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptVccSrcStorageType 1.3.6.1.4.1.562.2.4.1.114.9.20.8.1.1.4
This variable represents the storage type value for the atmIfVptVccSrc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptVccSrcIndex 1.3.6.1.4.1.562.2.4.1.114.9.20.8.1.1.10
This variable represents the index for the atmIfVptVccSrc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVptVccSrcProvTable 1.3.6.1.4.1.562.2.4.1.114.9.20.8.10
This attribute group contains the provisionable attributes of the SourcePvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptVccSrcProvEntry

atmIfVptVccSrcProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.20.8.10.1
An entry in the atmIfVptVccSrcProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptVccSrcProvEntry  

atmIfVptVccSrcRemoteAddress 1.3.6.1.4.1.562.2.4.1.114.9.20.8.10.1.1
This attribute represents the remote address of the soft PVC.
Status: obsolete Access: read-write
OBJECT-TYPE    
  HexString Size(20)  

atmIfVptVccSrcRemoteVpiVci 1.3.6.1.4.1.562.2.4.1.114.9.20.8.10.1.2
This attribute represents the remote VPI and VCI of the soft PVC.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IntegerSequence Size(3..9)  

atmIfVptVccSrcCallingAddress 1.3.6.1.4.1.562.2.4.1.114.9.20.8.10.1.3
This attribute represents the calling address of the soft PVC. If it is a null string, then the calling address is the address of the current interface (that is, where the soft PVC originates).
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..20)  

atmIfVptVccSrcCalledAddress 1.3.6.1.4.1.562.2.4.1.114.9.20.8.10.1.4
This attribute represents the called (remote) address of the soft PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(20)  

atmIfVptVccSrcCalledVpiVci 1.3.6.1.4.1.562.2.4.1.114.9.20.8.10.1.5
This attribute represents the remote VPI and VCI of the soft PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IntegerSequence Size(3..10)  

atmIfVptVccSrcOperTable 1.3.6.1.4.1.562.2.4.1.114.9.20.8.11
This attribute group contains the operational attributes associated with the SrcPvp or SrcPvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptVccSrcOperEntry

atmIfVptVccSrcOperEntry 1.3.6.1.4.1.562.2.4.1.114.9.20.8.11.1
An entry in the atmIfVptVccSrcOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptVccSrcOperEntry  

atmIfVptVccSrcState 1.3.6.1.4.1.562.2.4.1.114.9.20.8.11.1.1
This attribute indicates the state of the soft PVP or soft PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(0), inactive(1)  

atmIfVptVccSrcRetryCount 1.3.6.1.4.1.562.2.4.1.114.9.20.8.11.1.2
This attribute indicates the number of failed attempts to set up the soft PVP or soft PVC since the last time the connection failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptVccSrcLastFailureCauseCode 1.3.6.1.4.1.562.2.4.1.114.9.20.8.11.1.3
This attribute contains the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages. The default value for this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVptVccSrcLastFailureDiagCode 1.3.6.1.4.1.562.2.4.1.114.9.20.8.11.1.4
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to NULL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..8)  

atmIfVptVccEp 1.3.6.1.4.1.562.2.4.1.114.9.20.9
OBJECT IDENTIFIER    

atmIfVptVccEpRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.20.9.1
This entry controls the addition and deletion of atmIfVptVccEp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptVccEpRowStatusEntry

atmIfVptVccEpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.20.9.1.1
A single entry in the table represents a single atmIfVptVccEp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptVccEpRowStatusEntry  

atmIfVptVccEpRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.20.9.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptVccEp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

atmIfVptVccEpComponentName 1.3.6.1.4.1.562.2.4.1.114.9.20.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptVccEpStorageType 1.3.6.1.4.1.562.2.4.1.114.9.20.9.1.1.4
This variable represents the storage type value for the atmIfVptVccEp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptVccEpIndex 1.3.6.1.4.1.562.2.4.1.114.9.20.9.1.1.10
This variable represents the index for the atmIfVptVccEp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVptVccEpOperTable 1.3.6.1.4.1.562.2.4.1.114.9.20.9.10
This attribute group contains the operational attributes for the AtmEndPoint component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptVccEpOperEntry

atmIfVptVccEpOperEntry 1.3.6.1.4.1.562.2.4.1.114.9.20.9.10.1
An entry in the atmIfVptVccEpOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptVccEpOperEntry  

atmIfVptVccEpApplicationName 1.3.6.1.4.1.562.2.4.1.114.9.20.9.10.1.1
This attribute indicates the component name associated with the application associated with the switched VCC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

atmIfVptVccRp 1.3.6.1.4.1.562.2.4.1.114.9.20.10
OBJECT IDENTIFIER    

atmIfVptVccRpRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.20.10.1
This entry controls the addition and deletion of atmIfVptVccRp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptVccRpRowStatusEntry

atmIfVptVccRpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.20.10.1.1
A single entry in the table represents a single atmIfVptVccRp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptVccRpRowStatusEntry  

atmIfVptVccRpRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.20.10.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptVccRp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

atmIfVptVccRpComponentName 1.3.6.1.4.1.562.2.4.1.114.9.20.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptVccRpStorageType 1.3.6.1.4.1.562.2.4.1.114.9.20.10.1.1.4
This variable represents the storage type value for the atmIfVptVccRp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptVccRpIndex 1.3.6.1.4.1.562.2.4.1.114.9.20.10.1.1.10
This variable represents the index for the atmIfVptVccRp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVptVccRpOperTable 1.3.6.1.4.1.562.2.4.1.114.9.20.10.10
This attribute group contains the operational attributes for the AtmRelayPoint component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptVccRpOperEntry

atmIfVptVccRpOperEntry 1.3.6.1.4.1.562.2.4.1.114.9.20.10.10.1
An entry in the atmIfVptVccRpOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptVccRpOperEntry  

atmIfVptVccRpNextHop 1.3.6.1.4.1.562.2.4.1.114.9.20.10.10.1.1
This attribute indicates the component name of the Rp component with which this Rp component is associated.
Status: obsolete Access: read-only
OBJECT-TYPE    
  RowPointer  

atmIfVptVccRpNextHopsTable 1.3.6.1.4.1.562.2.4.1.114.9.20.10.430
This attribute indicates the component name(s) of the Rp component(s) with which this Rp component is associated. This attribute can have more than one component name only when the Vcc distributionType is pointToMultipoint and the callDirection is fromLink.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptVccRpNextHopsEntry

atmIfVptVccRpNextHopsEntry 1.3.6.1.4.1.562.2.4.1.114.9.20.10.430.1
An entry in the atmIfVptVccRpNextHopsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptVccRpNextHopsEntry  

atmIfVptVccRpNextHopsValue 1.3.6.1.4.1.562.2.4.1.114.9.20.10.430.1.1
This variable represents both the value and the index for the atmIfVptVccRpNextHopsTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

atmIfVptVccDst 1.3.6.1.4.1.562.2.4.1.114.9.20.11
OBJECT IDENTIFIER    

atmIfVptVccDstRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.20.11.1
This entry controls the addition and deletion of atmIfVptVccDst components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptVccDstRowStatusEntry

atmIfVptVccDstRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.20.11.1.1
A single entry in the table represents a single atmIfVptVccDst component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptVccDstRowStatusEntry  

atmIfVptVccDstRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.20.11.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptVccDst components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

atmIfVptVccDstComponentName 1.3.6.1.4.1.562.2.4.1.114.9.20.11.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptVccDstStorageType 1.3.6.1.4.1.562.2.4.1.114.9.20.11.1.1.4
This variable represents the storage type value for the atmIfVptVccDst tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptVccDstIndex 1.3.6.1.4.1.562.2.4.1.114.9.20.11.1.1.10
This variable represents the index for the atmIfVptVccDst tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVptVccDstOperTable 1.3.6.1.4.1.562.2.4.1.114.9.20.11.10
This attribute group contains the operational attributes for the DestinationPvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptVccDstOperEntry

atmIfVptVccDstOperEntry 1.3.6.1.4.1.562.2.4.1.114.9.20.11.10.1
An entry in the atmIfVptVccDstOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptVccDstOperEntry  

atmIfVptVccDstCalledAddress 1.3.6.1.4.1.562.2.4.1.114.9.20.11.10.1.3
This attribute represents the called address of the soft PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(20)  

atmIfVptVccDstCallingAddress 1.3.6.1.4.1.562.2.4.1.114.9.20.11.10.1.4
This attribute represents the remote address of the soft PVC. If the address in not known, then the value of this address is Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(7..40)  

atmIfVptVccDstCallingVpiVci 1.3.6.1.4.1.562.2.4.1.114.9.20.11.10.1.5
This attribute represents the remote VPI and VCI of the soft PVC. If the VPI and VCI values are not known, this attribute is set to Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(7..9)  

atmNetworkingGroup 1.3.6.1.4.1.562.2.4.2.42.1
OBJECT IDENTIFIER    

atmNetworkingGroupBE 1.3.6.1.4.1.562.2.4.2.42.1.5
OBJECT IDENTIFIER    

atmNetworkingGroupBE01 1.3.6.1.4.1.562.2.4.2.42.1.5.2
OBJECT IDENTIFIER    

atmNetworkingGroupBE01A 1.3.6.1.4.1.562.2.4.2.42.1.5.2.2
OBJECT IDENTIFIER    

atmNetworkingCapabilities 1.3.6.1.4.1.562.2.4.2.42.3
OBJECT IDENTIFIER    

atmNetworkingCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.42.3.5
OBJECT IDENTIFIER    

atmNetworkingCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.42.3.5.2
OBJECT IDENTIFIER    

atmNetworkingCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.42.3.5.2.2
OBJECT IDENTIFIER