NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB

File: NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB.mib (39713 bytes)

Imported modules

NTNTECH-ROOT-MIB SNMPv2-SMI SNMPv2-TC

Imported symbols

ntntechInterfaceModule NtnDisplayString OBJECT-TYPE
MODULE-IDENTITY IpAddress TEXTUAL-CONVENTION

Defined Types

IfCfgPortEntry  
SEQUENCE    
  ifCfgSlotIndex INTEGER
  ifCfgPortIndex INTEGER
  ifCfgPortCircuitID OCTET STRING
  ifCfgPortFltrIp1Start IpAddress
  ifCfgPortFltrIp1End IpAddress
  ifCfgPortFltrIp2Start IpAddress
  ifCfgPortFltrIp2End IpAddress
  ifCfgPortBackboneVlan INTEGER
  ifCfgPortVlanPriority INTEGER
  ifCfgPortFloodMde INTEGER
  ifCfgPortIpFltProtocol INTEGER
  ifCfgPortReset INTEGER
  ifCfgPortBkBoneEthType INTEGER

IfCfgPortVLANEntry  
SEQUENCE    
  ifCfgIfSlotIndex INTEGER
  ifCfgIfPortIndex INTEGER
  ifCfgVLANIndex INTEGER
  ifCfgVLANIdStart INTEGER
  ifCfgVLANIdEnd INTEGER

IfCfgPortAdslEntry  
SEQUENCE    
  ifCfgAdslSlotIndex INTEGER
  ifCfgAdslPortIndex INTEGER
  ifCfgPortAdslPortMode INTEGER
  ifCfgPortAdslVpiVciDetect INTEGER
  ifCfgPortAdslRxRate INTEGER
  ifCfgPortAdslTxRate INTEGER
  ifCfgPortAdslFrameType INTEGER
  ifCfgPortAdslVpi INTEGER
  ifCfgPortAdslVci INTEGER
  ifCfgPortAdslStandardMde INTEGER
  ifCfgPortAdslCorrectionUp INTEGER
  ifCfgPortAdslCorrectionDn INTEGER
  ifCfgPortAdslDelayUp INTEGER
  ifCfgPortAdslDelayDn INTEGER
  ifCfgPortAdslEcFdm INTEGER
  ifCfgPortAdslFastBuffer INTEGER
  ifCfgPortAdslSnrUp INTEGER
  ifCfgPortAdslSnrDn INTEGER
  ifCfgPortAdslActualRxRate INTEGER
  ifCfgPortAdslActualTxRate INTEGER
  ifCfgPortAdslActualStandardMde INTEGER
  ifCfgPortAdslActualDepthUp INTEGER
  ifCfgPortAdslActualDepthDn INTEGER

IfCfgPortIdslEntry  
SEQUENCE    
  ifCfgIdslSlotIndex INTEGER
  ifCfgIdslPortIndex INTEGER
  ifCfgPortIdslRxTxRate INTEGER

IfCfgPortSdslEntry  
SEQUENCE    
  ifCfgSdslSlotIndex INTEGER
  ifCfgSdslPortIndex INTEGER
  ifCfgPortSdslRxTxRate INTEGER
  ifCfgPortSdslLineCode INTEGER

IfCfgPortT1Entry  
SEQUENCE    
  ifCfgT1SlotIndex INTEGER
  ifCfgT1PortIndex INTEGER
  ifCfgPortT1RxTxRate INTEGER
  ifCfgPortT1FrameType INTEGER
  ifCfgPortT1LineCode INTEGER
  ifCfgPortT1TxBuildOut INTEGER
  ifCfgPortT1ClockSrc INTEGER

IfCfgPortE1Entry  
SEQUENCE    
  ifCfgE1SlotIndex INTEGER
  ifCfgE1PortIndex INTEGER
  ifCfgPortE1RxTxRate INTEGER
  ifCfgPortE1FrameType INTEGER
  ifCfgPortE1LineCode INTEGER
  ifCfgPortE1ClockSrc INTEGER

Defined Values

ntntechInterfaceModuleConfigurationMIB 1.3.6.1.4.1.8059.1.2.1
This mib module defines an SNMP API to manage Paradyne Corporation's IPD12000, IPD4000, and Mini/Micro DSLAM interface parameters. The interface types are described below, AMD8000-12 12-Port ADSL Mini DSLAMs With Full Rate and G.lite Operational Modes AAM8000-12 12-Port ADSL Access Multiplexer with Full Rate and G.lite Operational Modes AAM8000-24 24-Port ADSL Access Multiplexer with Full Rate and G.lite Operational Modes EAM2000-12 12-Port E1 Access Multiplexer TAM1500-12 12-Port T1 Access Multiplexer IAM144-12 12-Port IDSL Access Multiplexer SAM1000-12 12-Port SDSL Access Multiplexer SAM2000-12, SAM2000Q-12, and SAM2000G-12 12-Port SDSL Access Multiplexers with CAP, 2B1Q or TC/PAM (G.SHDSL) encoding SAM2000D-12 12-Port SDSL Access Multiplexer W/O voice daughter card, running CAP encoding SAM2000DQ-12 12-Port SDSL Access Multiplexer W/O voice daughter card, running 2B1Q encoding SAM2000V-12, SAM2000QV-12, SAM2000GV-12 12-Port SDSL Access Multiplexers with Voice Capability running CAP, 2B1Q or TC/PAM (G.SHDSL) encoding SIM2000-12 12-Port SDSL Access Multiplexer with CAP, 2B1Q and TC/PAM (G.SHDSL) encoding SIM2000-24 24-Port SDSL Access Multiplexer with CAP, 2B1Q and TC/PAM (G.SHDSL) encoding SMD2000-12, SMD2000Q-12, SMD2000G-12 12-Port SDSL Mini DSLAMs: AC and DC Versions with Cap, 2B1Q and G.SHDSL Line encoding SuD2011_12T, SuD2011_12E, SuD2003_12T, SuD2003_12E 12-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL Line encoding SuD2011_6T, SuD2011_6E, SuD2002_6T, SuD2002_6E 6-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL Line encoding
MODULE-IDENTITY    

ifModCfgMIBObjects 1.3.6.1.4.1.8059.1.2.1.1
OBJECT IDENTIFIER    

ifModCfgParameterConfiguration 1.3.6.1.4.1.8059.1.2.1.1.1
OBJECT IDENTIFIER    

prmCfgInterface 1.3.6.1.4.1.8059.1.2.1.1.1.1
OBJECT IDENTIFIER    

prmCfgInterfacePort 1.3.6.1.4.1.8059.1.2.1.1.1.2
OBJECT IDENTIFIER    

ifCfgPortTable 1.3.6.1.4.1.8059.1.2.1.1.1.2.1
A list of IPD12000, IPD4000 Access/Inverse module and Mini/Micro DSLAM entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IfCfgPortEntry

ifCfgPortEntry 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1
An entry containing management information applicable to the IPD12000, IPD4000 Access/Inverse module as well as the Mini/Micro DSLAM.
Status: current Access: not-accessible
OBJECT-TYPE    
  IfCfgPortEntry  

ifCfgSlotIndex 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.1
The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro DSLAM will have a slot index value of 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..12  

ifCfgPortIndex 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.2
The physical port number of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

ifCfgPortCircuitID 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.3
The circuit identification number assigned to a port on an interface.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

ifCfgPortFltrIp1Start 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.4
The value assigned to a port which designates the start of the first Ip filter range.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ifCfgPortFltrIp1End 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.5
The value assigned to a port which designates the end of the first Ip filter range.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ifCfgPortFltrIp2Start 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.6
The value assigned to a port which designates the start of the second Ip filter range.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ifCfgPortFltrIp2End 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.7
The value assigned to a port which designates the end of the second Ip filter range.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ifCfgPortBackboneVlan 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.8
The Backbone VLAN tag will become the primary identifier that can be used by routers with backbone capabilities to direct traffic to the appropriate network cloud.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4085  

ifCfgPortVlanPriority 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.9
The value assigned to a port which designates the VLAN priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

ifCfgPortFloodMde 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.10
The value assigned to a port which designates the flood mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER uplFlood(1), vlnFlood(2)  

ifCfgPortIpFltProtocol 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.11
The value assigned to a port which designates the IP filter protocol.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER protocolALL(1), protocolIP(2)  

ifCfgPortReset 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.12
This value is always read as integer value 2. Reset all associated port statistics to zero upon initiation of the reset(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1), noReset(2)  

ifCfgPortBkBoneEthType 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.13
The value assigned to a port which designates the ethernet packet type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ethtype8100(1), ethtype9100(2)  

ifCfgPortVLANTable 1.3.6.1.4.1.8059.1.2.1.1.1.2.2
A list of IPD12000, IPD4000 Access/Inverse module and Mini/Micro DSLAM port 802.1Q VLAN entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IfCfgPortVLANEntry

ifCfgPortVLANEntry 1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1
An entry containing management information applicable to an IPD12000, IPD4000 Access/Inverse module and Mini/Micro DSLAM port.
Status: current Access: not-accessible
OBJECT-TYPE    
  IfCfgPortVLANEntry  

ifCfgIfSlotIndex 1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1.1
The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..12  

ifCfgIfPortIndex 1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1.2
The physical port number of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

ifCfgVLANIndex 1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1.3
A pointer to one of ten possible VLAN tags that can be assigned to a port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

ifCfgVLANIdStart 1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1.4
The value assigned to a port which designates the start of a VLAN ID range.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4085  

ifCfgVLANIdEnd 1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1.5
The value assigned to a port which designates the end of a VLAN ID range.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4085  

ifCfgPortAdslTable 1.3.6.1.4.1.8059.1.2.1.1.1.2.3
A list of ADSL interface entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IfCfgPortAdslEntry

ifCfgPortAdslEntry 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1
An entry containing management information applicable to ADSL module.
Status: current Access: not-accessible
OBJECT-TYPE    
  IfCfgPortAdslEntry  

ifCfgAdslSlotIndex 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.1
The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..12  

ifCfgAdslPortIndex 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.2
The physical port number of the ADSL interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

ifCfgPortAdslPortMode 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.3
The port mode of operation, ON, OFF, or Adaptive. When a port is set to Adaptive mode, the best possible value for the Rx/Tx data rates will be achieved. A successful data rate connection will be indicated with a port 'linkup' status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), adaptive(3), fixedadaptive(4)  

ifCfgPortAdslVpiVciDetect 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.4
ADSL Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI) detect mode. If this mode is set to ON, auto-detect the line VPI and VCI values.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

ifCfgPortAdslRxRate 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.5
ADSL upstream (Rx) data rate. The available upstream data rates range from 32Kbps to 1024Kbps. The upstream data rate can be set by the user via the set value x where x = 1 to 32. The actual data rate that is represented by these set values can be calculated using the following formula, (x * 32Kbps) = upstream data rate, i.e. (3 * 32Kbps) = 96Kbps Note: if an Rx rate value of zero(0) is returned via a GET operation, this would indicate that the port is in 'Adaptive' mode and that the link condition is 'linkdown'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

ifCfgPortAdslTxRate 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.6
ADSL downstream (Tx) data rates. The available downstream data rates range from 32Kbps to 8064Kbps. The downstream data rate can be set by the user via the set value x where x = 1 to 252. The actual data rate that is represented by these set values can be calculated using the following formula, (x * 32Kbps) = downstream data rate, i.e. (252 * 32Kbps) = 8064Kbps Note: if a Tx rate value of zero(0) is returned via a GET operation, this would indicate that the port is in 'Adaptive' mode and that the link condition is 'linkdown'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..252  

ifCfgPortAdslFrameType 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.7
ADSL frame type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER frameType1483LLC(1), frameType1483VCM(2)  

ifCfgPortAdslVpi 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.8
ADSL Virtual Path Identifier (VPI) value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

ifCfgPortAdslVci 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.9
ADSL Virtual Channel Identifier (VCI).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

ifCfgPortAdslStandardMde 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.10
ADSL standard modes of operation. Note: if receive a standard mode of integer value 255 (0xFF), this would indicate that the standard mode is unknown due to a port 'linkdown' condition.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER t1413(1), gLite(2), gDMT(3), multiMode(4), aLCATEL(5), gDMT-BIS(6), gDMT-BISplus(7), gDMT-BIS-Annex-L(8), gDMT-BIS-Annex-M(9), stdMdeNoLink(255)  

ifCfgPortAdslCorrectionUp 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.11
ADSL Impulse protection duration in the Upstream duration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER corr125us(1), corr250us(2), corr500us(3), corr1ms(4), corr2ms(5), corr4ms(6)  

ifCfgPortAdslCorrectionDn 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.12
ADSL Impulse protection duration in the Upstream duration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER corr125us(1), corr250us(2), corr500us(3), corr1ms(4), corr2ms(5), corr4ms(6)  

ifCfgPortAdslDelayUp 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.13
ADSL Impulse protection duration in the Upstream direction.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER delay1ms(1), delay2ms(2), delay4ms(3), delay8ms(4), delay16ms(5), delay32ms(6), delay64ms(7)  

ifCfgPortAdslDelayDn 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.14
ADSL Impulse protection duration in the Upstream direction.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER delay1ms(1), delay2ms(2), delay4ms(3), delay8ms(4), delay16ms(5), delay32ms(6), delay64ms(7)  

ifCfgPortAdslEcFdm 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.15
ADSL Echo Cancellation uses Upstream Tones for Upstream and Dnstream data.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ec(1), fdm(2)  

ifCfgPortAdslFastBuffer 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.16
Selects fast buffer/low latency. Same is interleave delay of 1ms
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

ifCfgPortAdslSnrUp 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.17
Selects Target Upstream SNR
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

ifCfgPortAdslSnrDn 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.18
Selects Target Dnstream SNR
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

ifCfgPortAdslActualRxRate 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.19
ADSL upstream (Rx) data rate. The available upstream data rates range from 32Kbps to 1024Kbps. The upstream data rate can be set by the user via the set value x where x = 1 to 64. The actual data rate that is represented by these set values can be calculated using the following formula, (x * 32Kbps) = upstream data rate, i.e. (3 * 32Kbps) = 96Kbps Note: if an Rx rate value of zero(0) is returned via a GET operation, this would indicate that the port is in 'Adaptive' mode and that the link condition is 'linkdown'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..64  

ifCfgPortAdslActualTxRate 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.20
ADSL downstream (Tx) data rates. The available downstream data rates range from 32Kbps to 8064Kbps. The downstream data rate can be set by the user via the set value x where x = 1 to 1024. The actual data rate that is represented by these set values can be calculated using the following formula, (x * 32Kbps) = downstream data rate, i.e. (252 * 32Kbps) = 8064Kbps Note: if a Tx rate value of zero(0) is returned via a GET operation, this would indicate that the port is in 'Adaptive' mode and that the link condition is 'linkdown'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1024  

ifCfgPortAdslActualStandardMde 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.21
ADSL current operating mode, should match ifCfgPortAdslStandardMde UNLESS operating in MULTIMODE
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER t1413(1), gLite(2), gDMT(3), multiMode(4), aLCATEL(5), gDMT-BIS(6), gDMT-BISplus(7), gDMT-BIS-Annex-L(8), gDMT-BIS-Annex-M(9), stdMdeNoLink(255)  

ifCfgPortAdslActualDepthUp 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.22
ADSL upstream interleving depth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

ifCfgPortAdslActualDepthDn 1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.23
ADSL dnstream interleaving depth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

ifCfgPortIdslTable 1.3.6.1.4.1.8059.1.2.1.1.1.2.4
A list of IDSL interface entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IfCfgPortIdslEntry

ifCfgPortIdslEntry 1.3.6.1.4.1.8059.1.2.1.1.1.2.4.1
An entry containing management information applicable to the IDSL interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  IfCfgPortIdslEntry  

ifCfgIdslSlotIndex 1.3.6.1.4.1.8059.1.2.1.1.1.2.4.1.1
The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..12  

ifCfgIdslPortIndex 1.3.6.1.4.1.8059.1.2.1.1.1.2.4.1.2
The physical port number of the IDSL interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

ifCfgPortIdslRxTxRate 1.3.6.1.4.1.8059.1.2.1.1.1.2.4.1.3
IDSL symetrical (Rx/Tx) data rates. IDSL module types and the associated Rx/Tx data rates- IAM144-12: Data Rates (Kbps): 128,144 Note: if a rate value of zero(0) is returned via a GET operation, it will indicate that the port is defective.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idslRxTxRateDefect(0), idslRxTxRate128(1), idslRxTxRate144(2), idslRxTxRateOff(255)  

ifCfgPortSdslTable 1.3.6.1.4.1.8059.1.2.1.1.1.2.5
A list of SDSL interface entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IfCfgPortSdslEntry

ifCfgPortSdslEntry 1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1
An entry containing management information applicable to the SDSL interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  IfCfgPortSdslEntry  

ifCfgSdslSlotIndex 1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.1
The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..12  

ifCfgSdslPortIndex 1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.2
The physical port number of the SDSL interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

ifCfgPortSdslRxTxRate 1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.3
SDSL symetrical (Rx/Tx) data rates. SDSL module types and the associated Rx/Tx data rates- SAM1000-12: Data Rates (Kbps): 272,528,784,1168 SAM2000-12,SAM2000Q-12,SAM2000G-12,SAM2000D-12,SAM2000DQ-12, SIM2000-24,SuD2011_12T,SuD2011_12E,SuD2003_12T,SuD2003_12E, SuD2011_6T,SuD2011_6E,SuD2002_6T,SuD2002_6E: Data Rates (Kbps): 144,272,400,528,784,1040,1552,2064,2320 SAM2000V-12,SAM2000QV-12,SAM2000GV-12,SIM2000V-12,SIM2000V-24: Data Rates (Kbps): 272,400,528,784,1040,1552,2064,2320 Note: if a rate value of zero(0) is returned via a GET operation, it will indicate that the port is defective.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sdslRxTxRateDefect(0), sdslRxTxRate144(1), sdslRxTxRate272(2), sdslRxTxRate400(3), sdslRxTxRate528(4), sdslRxTxRate784(5), sdslRxTxRate1040(6), sdslRxTxRate1168(7), sdslRxTxRate1552(8), sdslRxTxRate2064(9), sdslRxTxRate2320(10), sdslRxTxRateOff(255)  

ifCfgPortSdslLineCode 1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.4
Line code for the SDSL modules. Note, the line code may be set on the following modules, SIM2000-12,SIM2000-24,SIM2000V-24,SIM2000V-12, or the SDSL micro DSLAM. The line code options are described as follows- CAP: Carrierless Amplitude and Phase modulation 2B1Q: Two Binary, One Quaternary G.SHDSL: Multirate Symmetric Single-pair DSL
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER lineCodeCap(1), lineCode2B1Q(2), lineCodeGSHDSL(3)  

ifCfgPortT1Table 1.3.6.1.4.1.8059.1.2.1.1.1.2.6
A list of T1 interface entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IfCfgPortT1Entry

ifCfgPortT1Entry 1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1
An entry containing management information applicable to the T1 interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  IfCfgPortT1Entry  

ifCfgT1SlotIndex 1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.1
The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..12  

ifCfgT1PortIndex 1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.2
The physical port number of the T1 interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

ifCfgPortT1RxTxRate 1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.3
T1 symetrical (Rx/Tx) data rates. T1 module types and the associated Rx/Tx data rates- TAM1500-12,TIM1500-12,TIM1500-24: Data Rates (Kbps): 192,384,576,768,960,1152,1344,1536 Note: if a rate value of zero(0) is returned via a GET operation, it will indicate that the port is defective.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER t1RxTxRateDefect(0), t1RxTxRate192(1), t1RxTxRate384(2), t1RxTxRate576(3), t1RxTxRate768(4), t1RxTxRate960(5), t1RxTxRate1152(6), t1RxTxRate1344(7), t1RxTxRate1536(8), t1RxTxRateOff(255)  

ifCfgPortT1FrameType 1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.4
T1 frame type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER t1frameTypeESF(1), t1frameTypeSFD4(2)  

ifCfgPortT1LineCode 1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.5
T1 line code.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER t1lineCodeB8ZS(1), t1lineCodeAMI(2)  

ifCfgPortT1TxBuildOut 1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.6
T1 tx buildout.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER t1TxBuildOut0db(1), t1TxBuildOutN7p5db(2), t1TxBuildOutN15db(3), t1TxBuildOutN22db(4)  

ifCfgPortT1ClockSrc 1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.7
T1 clock source.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER t1ClockSrcLocal(1), t1ClockSrcLoop(2)  

ifCfgPortE1Table 1.3.6.1.4.1.8059.1.2.1.1.1.2.7
A list of E1 interface entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IfCfgPortE1Entry

ifCfgPortE1Entry 1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1
An entry containing management information applicable to the E1 interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  IfCfgPortE1Entry  

ifCfgE1SlotIndex 1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.1
The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..12  

ifCfgE1PortIndex 1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.2
The physical port number of the E1 interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

ifCfgPortE1RxTxRate 1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.3
E1 symetrical (Rx/Tx) data rates. E1 module types and the associated Rx/Tx data rates- EAM2000-12,EIM2000-12,EIM2000-24: Data Rates (Kbps): 256,512,768,1024,1280,1536,1792,1984 Note: if a rate value of zero(0) is returned via a GET operation, it will indicate that the port is defective.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER e1RxTxRateDefect(0), e1RxTxRate256(1), e1RxTxRate512(2), e1RxTxRate768(3), e1RxTxRate1024(4), e1RxTxRate1280(5), e1RxTxRate1536(6), e1RxTxRate1792(7), e1RxTxRate1984(8), e1RxTxRateOff(255)  

ifCfgPortE1FrameType 1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.4
E1 frame type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER e1frameTypeCRC(1), e1frameTypeNoCRC(2)  

ifCfgPortE1LineCode 1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.5
E1 line code.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER e1lineCodeHDB3(1), e1lineCodeAMI(2)  

ifCfgPortE1ClockSrc 1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.6
E1 clock source.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER e1ClockSrcLocal(1), e1ClockSrcLoop(2)