NSCHippiSonet-MIB
File:
NSCHippiSonet-MIB.mib (23630 bytes)
Imported modules
Imported symbols
Defined Values
| nscHippiSonetMonClock |
1.3.6.1.4.1.10.2.1.5.3.1 |
| 500 Khz clock value (for time stamps). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonBIPErrors |
1.3.6.1.4.1.10.2.1.5.3.4 |
| Received path BIP Errors. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonSrcBusy |
1.3.6.1.4.1.10.2.1.5.3.5 |
| Duration in 500Khz that the source was busy. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonSrcSOC |
1.3.6.1.4.1.10.2.1.5.3.6 |
| Number of source start of connections |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonSrcEOC |
1.3.6.1.4.1.10.2.1.5.3.7 |
| Number of source end of connections |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonLOF |
1.3.6.1.4.1.10.2.1.5.3.12 |
| Number of receive sonet Loss of Frame events |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonLOS |
1.3.6.1.4.1.10.2.1.5.3.13 |
| Number of receive sonet Loss of Signal events |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonDstBursts |
1.3.6.1.4.1.10.2.1.5.3.14 |
| Number of Destination bursts |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonDstPackets |
1.3.6.1.4.1.10.2.1.5.3.15 |
| Number of Destination packets |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonDstSync |
1.3.6.1.4.1.10.2.1.5.3.16 |
| Number of Destination sync errors |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonDstLLRC |
1.3.6.1.4.1.10.2.1.5.3.17 |
| Number of Destination LLRC errors |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonDstPE |
1.3.6.1.4.1.10.2.1.5.3.18 |
| Number of Destination Parity Errors |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonDstConnect |
1.3.6.1.4.1.10.2.1.5.3.19 |
| Number of Destination connects |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonSrcConnect |
1.3.6.1.4.1.10.2.1.5.3.20 |
| Number of source connects |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonSrcPackets |
1.3.6.1.4.1.10.2.1.5.3.21 |
| Number of source packets |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonSrcBursts |
1.3.6.1.4.1.10.2.1.5.3.22 |
| Number of source bursts |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonSrcForceErrors |
1.3.6.1.4.1.10.2.1.5.3.23 |
| Number of Source Bad-data Force Errors |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonSrcCRC |
1.3.6.1.4.1.10.2.1.5.3.24 |
| Number of Source CRC errors |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonDstWords |
1.3.6.1.4.1.10.2.1.5.3.25 |
| Number of Destination burst words / 32 (Kbits) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetMonSrcWords |
1.3.6.1.4.1.10.2.1.5.3.26 |
| Number of Destination burst words / 32 (Kbits) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetADLaserBias |
1.3.6.1.4.1.10.2.1.5.4.2 |
| Laser bias voltage (in milli-volts) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetADLaserBackface |
1.3.6.1.4.1.10.2.1.5.4.3 |
| Laser backface voltage (in milli-volts) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetADInternalTemp |
1.3.6.1.4.1.10.2.1.5.4.4 |
| Internal temperature (degrees F) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetADExhaustTemp |
1.3.6.1.4.1.10.2.1.5.4.5 |
| Exhaust temperature (degrees F) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetOpticalRcvOffset |
1.3.6.1.4.1.10.2.1.5.6.1 |
| String representation of the floating value for
the offset of the optical receive light formula. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| nscHippiSonetOpticalRcvSlope |
1.3.6.1.4.1.10.2.1.5.6.2 |
| String representation of the floating value for
the slope of the optical receive light formula. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| nscHippiSonetBiasCurrent |
1.3.6.1.4.1.10.2.1.5.6.3 |
| Integer representation of the floating value for
the baseline current of the transmit laser in
milliamps. This value is used by the machine to
determine the life of the laser. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetBiasTemp |
1.3.6.1.4.1.10.2.1.5.6.4 |
| Temperature in celcius at which the profiled
bias current was taken. This value is used with
the bias current to determine the life of the laser. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetBackfaceVoltage |
1.3.6.1.4.1.10.2.1.5.6.5 |
| String representation of the floting value of the
Voltage in millivolts that was measured at the
backface of the laser when it was new. This value
is used with the current backface voltage as an
additional method of determining if the transmit
laser has become defective. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| nscHippiSonetIField |
1.3.6.1.4.1.10.2.1.5.6.6 |
| The I-Field address that is used by the hippi
interface. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetBootPort |
1.3.6.1.4.1.10.2.1.5.6.7 |
| Which rs232 port the boot information should be sent
to. Ports 1 & 2 are the only valid ports with 1 being
located on the back of the machine and 2 on the front. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| nscHippiSonetPortSpeed |
1.3.6.1.4.1.10.2.1.5.6.8 |
| The baud rate to set the rs232 ports to at boot time. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nscHippiSonetThreshold |
1.3.6.1.4.1.10.2.1.5.6.9 |
| Threshold of the mega-fifo at which flow control will
be activated. The value represents 8ths of the fifo
with 7 representing the fifo must be full before flow
control is activated and 0 indicating that flow control
will happen as soon as the mega-fifo starts to fill.
This value may need to be adjusted to deal with time
delays over vary long sonet links in that you want flow
control to propagate back to the transmitting sonet box
before it puts enough information on the line to
overflow this machine. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..7 |
|
| nscHippiTimeout |
1.3.6.1.4.1.10.2.1.5.6.10 |
| Timeout value to use when trying to connect from our
hippi source. This timer is started when the source
raises connect. If the destination fails to respond
before the timer goes off, the connect will be aborted.
The timer is represented as the number of 500 KHz
clock ticks. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..7fff |
|
| nscHippiSonetDipSwitch |
1.3.6.1.4.1.10.2.1.5.6.11 |
| This is a software switch that functions much like
a hardware dip switch. At the moment, the only use
of this switch is to define whether the unit will
act as the master clock for the sonet line. The
bit values are defined as follows:
x x x x x x 1 - assert master clock
x x x x x 1 x - not assigned
x x x x 1 x x - not assigned
x x x 1 x x x - not assigned
x x 1 x x x x - not assigned
x 1 x x x x x - not assigned
1 x x x x x x - not assigned |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|