NETWORK-APPLIANCE-MIB

File: NETWORK-APPLIANCE-MIB.mib (649619 bytes)

Imported modules

RFC1155-SMI	RFC1213-MIB	RFC-1215
RFC-1212

Imported symbols

enterprises	Counter	IpAddress
TimeTicks	Gauge	PhysAddress
DisplayString	TRAP-TYPE	OBJECT-TYPE

Defined Types

PclEntry
SEQUENCE
	pclIpAddr	IpAddress
	pclRpcCalls	Counter
	pclRpcBadCalls	Counter
	pclRpcNullRecvs	Counter
	pclRpcBadLens	Counter
	pclRpcServXDRCalls	Counter
	pclNfsCalls	Counter
	pclNfsServBadCalls	Counter
	pclNfsV2Nulls	Counter
	pclNfsV2Getattrs	Counter
	pclNfsV2Setattrs	Counter
	pclNfsV2Roots	Counter
	pclNfsV2Lookups	Counter
	pclNfsV2Readlinks	Counter
	pclNfsV2Reads	Counter
	pclNfsV2Wrcaches	Counter
	pclNfsV2Writes	Counter
	pclNfsV2Creates	Counter
	pclNfsV2Removes	Counter
	pclNfsV2Renames	Counter
	pclNfsV2Links	Counter
	pclNfsV2Symlinks	Counter
	pclNfsV2Mkdirs	Counter
	pclNfsV2Rmdirs	Counter
	pclNfsV2Readdirs	Counter
	pclNfsV2Statfss	Counter
	pclNfsV3Nulls	Counter
	pclNfsV3Getattrs	Counter
	pclNfsV3Setattrs	Counter
	pclNfsV3Lookups	Counter
	pclNfsV3Accesss	Counter
	pclNfsV3Readlinks	Counter
	pclNfsV3Reads	Counter
	pclNfsV3Writes	Counter
	pclNfsV3Creates	Counter
	pclNfsV3Mkdirs	Counter
	pclNfsV3Symlinks	Counter
	pclNfsV3Mknods	Counter
	pclNfsV3Removes	Counter
	pclNfsV3Rmdirs	Counter
	pclNfsV3Renames	Counter
	pclNfsV3Links	Counter
	pclNfsV3Readdirs	Counter
	pclNfsV3ReaddirPluss	Counter
	pclNfsV3Fsstats	Counter
	pclNfsV3Fsinfos	Counter
	pclNfsV3Pathconfs	Counter
	pclNfsV3Commits	Counter
	pclPerCent	INTEGER	0..100
	pclNfsV2NullPerCent	INTEGER	0..100
	pclNfsV2GetattrPerCent	INTEGER	0..100
	pclNfsV2SetattrPerCent	INTEGER	0..100
	pclNfsV2RootPerCent	INTEGER	0..100
	pclNfsV2LookupPerCent	INTEGER	0..100
	pclNfsV2ReadlinkPerCent	INTEGER	0..100
	pclNfsV2ReadPerCent	INTEGER	0..100
	pclNfsV2WrcachePerCent	INTEGER	0..100
	pclNfsV2WritePerCent	INTEGER	0..100
	pclNfsV2CreatePerCent	INTEGER	0..100
	pclNfsV2RemovePerCent	INTEGER	0..100
	pclNfsV2RenamePerCent	INTEGER	0..100
	pclNfsV2LinkPerCent	INTEGER	0..100
	pclNfsV2SymlinkPerCent	INTEGER	0..100
	pclNfsV2MkdirPerCent	INTEGER	0..100
	pclNfsV2RmdirPerCent	INTEGER	0..100
	pclNfsV2ReaddirPerCent	INTEGER	0..100
	pclNfsV2StatfsPerCent	INTEGER	0..100
	pclNfsV3NullPerCent	INTEGER	0..100
	pclNfsV3GetattrPerCent	INTEGER	0..100
	pclNfsV3SetattrPerCent	INTEGER	0..100
	pclNfsV3LookupPerCent	INTEGER	0..100
	pclNfsV3AccessPerCent	INTEGER	0..100
	pclNfsV3ReadlinkPerCent	INTEGER	0..100
	pclNfsV3ReadPerCent	INTEGER	0..100
	pclNfsV3WritePerCent	INTEGER	0..100
	pclNfsV3CreatePerCent	INTEGER	0..100
	pclNfsV3MkdirPerCent	INTEGER	0..100
	pclNfsV3SymlinkPerCent	INTEGER	0..100
	pclNfsV3MknodPerCent	INTEGER	0..100
	pclNfsV3RemovePerCent	INTEGER	0..100
	pclNfsV3RmdirPerCent	INTEGER	0..100
	pclNfsV3RenamePerCent	INTEGER	0..100
	pclNfsV3LinkPerCent	INTEGER	0..100
	pclNfsV3ReaddirPerCent	INTEGER	0..100
	pclNfsV3ReaddirPlusPerCent	INTEGER	0..100
	pclNfsV3FsstatPerCent	INTEGER	0..100
	pclNfsV3FsinfoPerCent	INTEGER	0..100
	pclNfsV3PathconfPerCent	INTEGER	0..100
	pclNfsV3CommitPerCent	INTEGER	0..100
	pclNfsV2Read512Calls	Counter
	pclNfsV2Read1KCalls	Counter
	pclNfsV2Read2KCalls	Counter
	pclNfsV2Read4KCalls	Counter
	pclNfsV2Read8KCalls	Counter
	pclNfsV2Read16KCalls	Counter
	pclNfsV2Read32KCalls	Counter
	pclNfsV2Read64KCalls	Counter
	pclNfsV2Read128KCalls	Counter
	pclNfsV2Write512Calls	Counter
	pclNfsV2Write1KCalls	Counter
	pclNfsV2Write2KCalls	Counter
	pclNfsV2Write4KCalls	Counter
	pclNfsV2Write8KCalls	Counter
	pclNfsV2Write16KCalls	Counter
	pclNfsV2Write32KCalls	Counter
	pclNfsV2Write64KCalls	Counter
	pclNfsV2Write128KCalls	Counter
	pclNfsV3Read512Calls	Counter
	pclNfsV3Read1KCalls	Counter
	pclNfsV3Read2KCalls	Counter
	pclNfsV3Read4KCalls	Counter
	pclNfsV3Read8KCalls	Counter
	pclNfsV3Read16KCalls	Counter
	pclNfsV3Read32KCalls	Counter
	pclNfsV3Read64KCalls	Counter
	pclNfsV3Read128KCalls	Counter
	pclNfsV3Write512Calls	Counter
	pclNfsV3Write1KCalls	Counter
	pclNfsV3Write2KCalls	Counter
	pclNfsV3Write4KCalls	Counter
	pclNfsV3Write8KCalls	Counter
	pclNfsV3Write16KCalls	Counter
	pclNfsV3Write32KCalls	Counter
	pclNfsV3Write64KCalls	Counter
	pclNfsV3Write128KCalls	Counter

QrEntry
SEQUENCE
	qrIndex	INTEGER
	qrType	INTEGER
	qrId	INTEGER
	qrKBytesUsed	INTEGER
	qrKBytesLimit	INTEGER
	qrFilesUsed	INTEGER
	qrFileLimit	INTEGER
	qrPathName	DisplayString

QvStateEntry
SEQUENCE
	qvStateVolume	INTEGER
	qvStateName	DisplayString
	qvStateStat	INTEGER
	qvStateInitPercent	INTEGER

QrVEntry
SEQUENCE
	qrVIndex	INTEGER
	qrVType	INTEGER
	qrVId	INTEGER
	qrVKBytesUsed	INTEGER
	qrVKBytesLimit	INTEGER
	qrVFilesUsed	INTEGER
	qrVFileLimit	INTEGER
	qrVPathName	DisplayString
	qrVVolume	INTEGER
	qrVTree	DisplayString
	qrVIdType	INTEGER
	qrVSid	DisplayString
	qrVKBytesThreshold	INTEGER
	qrVKBytesLimitSoft	INTEGER
	qrVFileLimitSoft	INTEGER

QrV2Entry
SEQUENCE
	qrV2Index	INTEGER
	qrV2Type	INTEGER
	qrV2Id	INTEGER
	qrV2HighKBytesUsed	INTEGER
	qrV2LowKBytesUsed	INTEGER
	qrV2QuotaUnlimited	INTEGER
	qrV2HighKBytesLimit	INTEGER
	qrV2LowKBytesLimit	INTEGER
	qrV2FilesUsed	INTEGER
	qrV2FileQuotaUnlimited	INTEGER
	qrV2FileLimit	INTEGER
	qrV2PathName	DisplayString
	qrV2Volume	INTEGER
	qrV2Tree	DisplayString
	qrV2IdType	INTEGER
	qrV2Sid	DisplayString
	qrV2ThresholdUnlimited	INTEGER
	qrV2HighKBytesThreshold	INTEGER
	qrV2LowKBytesThreshold	INTEGER
	qrV2SoftQuotaUnlimited	INTEGER
	qrV2HighKBytesSoftLimit	INTEGER
	qrV2LowKBytesSoftLimit	INTEGER
	qrV2SoftFileQuotaUnlimited	INTEGER
	qrV2SoftFileLimit	INTEGER

DfEntry
SEQUENCE
	dfIndex	INTEGER
	dfFileSys	DisplayString
	dfKBytesTotal	INTEGER
	dfKBytesUsed	INTEGER
	dfKBytesAvail	INTEGER
	dfPerCentKBytesCapacity	INTEGER
	dfInodesUsed	INTEGER
	dfInodesFree	INTEGER
	dfPerCentInodeCapacity	INTEGER
	dfMountedOn	DisplayString
	dfMaxFilesAvail	INTEGER
	dfMaxFilesUsed	INTEGER
	dfMaxFilesPossible	INTEGER
	dfHighTotalKBytes	INTEGER
	dfLowTotalKBytes	INTEGER
	dfHighUsedKBytes	INTEGER
	dfLowUsedKBytes	INTEGER
	dfHighAvailKBytes	INTEGER
	dfLowAvailKBytes	INTEGER
	dfStatus	INTEGER
	dfMirrorStatus	INTEGER
	dfPlexCount	INTEGER
	dfType	INTEGER

SlEntry
SEQUENCE
	slIndex	INTEGER
	slMonth	INTEGER
	slDay	INTEGER	1..31
	slHour	INTEGER	0..23
	slMinutes	INTEGER	0..59
	slName	DisplayString

SlVEntry
SEQUENCE
	slVIndex	INTEGER
	slVMonth	INTEGER
	slVDay	INTEGER	1..31
	slVHour	INTEGER	0..23
	slVMinutes	INTEGER	0..59
	slVName	DisplayString
	slVVolume	INTEGER
	slVNumber	INTEGER
	slVVolumeName	DisplayString
	slVType	INTEGER

SlQEntry
SEQUENCE
	slQIndex	INTEGER
	slQVolume	INTEGER
	slQQtree	INTEGER
	slQSnapshotName	DisplayString
	slQSnapshotTime	INTEGER
	slQQtreeName	DisplayString
	slQQtreeContent	INTEGER
	slQSource	OCTET STRING
	slQSourceTime	INTEGER
	slQVolumeName	DisplayString

VolEntry
SEQUENCE
	volIndex	INTEGER
	volName	DisplayString
	volFSID	DisplayString
	volOwningHost	INTEGER
	volState	DisplayString
	volStatus	DisplayString
	volOptions	DisplayString
	volUUID	DisplayString
	volAggrName	DisplayString
	volType	INTEGER
	volClone	INTEGER
	volCloneOf	DisplayString
	volCloneSnap	DisplayString

QtreeEntry
SEQUENCE
	qtreeIndex	INTEGER
	qtreeVolume	INTEGER
	qtreeVolumeName	DisplayString
	qtreeId	INTEGER
	qtreeName	DisplayString
	qtreeStyle	INTEGER
	qtreeStatus	INTEGER
	qtreeOplock	INTEGER

AggrEntry
SEQUENCE
	aggrIndex	INTEGER
	aggrName	DisplayString
	aggrFSID	DisplayString
	aggrOwningHost	INTEGER
	aggrState	DisplayString
	aggrStatus	DisplayString
	aggrOptions	DisplayString
	aggrUUID	DisplayString
	aggrFlexvollist	OCTET STRING
	aggrType	INTEGER

RaidEntry
SEQUENCE
	raidIndex	INTEGER
	raidDiskName	DisplayString
	raidStatus	INTEGER
	raidDiskId	INTEGER
	raidScsiAdapter	DisplayString
	raidScsiId	INTEGER	0..100
	raidUsedMb	INTEGER
	raidUsedBlocks	INTEGER
	raidTotalMb	INTEGER
	raidTotalBlocks	INTEGER
	raidCompletionPerCent	INTEGER	0..100

RaidVEntry
SEQUENCE
	raidVIndex	INTEGER
	raidVDiskName	DisplayString
	raidVStatus	INTEGER
	raidVDiskId	INTEGER
	raidVScsiAdapter	DisplayString
	raidVScsiId	INTEGER	0..100
	raidVUsedMb	INTEGER
	raidVUsedBlocks	INTEGER
	raidVTotalMb	INTEGER
	raidVTotalBlocks	INTEGER
	raidVCompletionPerCent	INTEGER	0..100
	raidVVol	INTEGER
	raidVGroup	INTEGER
	raidVDiskNumber	INTEGER
	raidVGroupNumber	INTEGER
	raidVDiskPort	INTEGER
	raidVSecondaryDiskName	DisplayString
	raidVSecondaryDiskPort	INTEGER
	raidVShelf	INTEGER
	raidVBay	INTEGER
	raidVPlex	INTEGER
	raidVPlexGroup	INTEGER
	raidVPlexNumber	INTEGER	1..2
	raidVPlexName	DisplayString
	raidVSectorSize	INTEGER
	raidVDiskSerialNumber	DisplayString
	raidVDiskVendor	DisplayString
	raidVDiskModel	DisplayString
	raidVDiskFirmwareRevision	DisplayString
	raidVDiskRPM	DisplayString
	raidVDiskType	DisplayString
	raidVDiskPool	DisplayString
	raidVDiskCopyDestDiskName	DisplayString

SpareEntry
SEQUENCE
	spareIndex	INTEGER
	spareDiskName	DisplayString
	spareStatus	INTEGER
	spareDiskId	INTEGER
	spareScsiAdapter	DisplayString
	spareScsiId	INTEGER	0..100
	spareTotalMb	INTEGER
	spareTotalBlocks	INTEGER
	spareDiskPort	INTEGER
	spareSecondaryDiskName	DisplayString
	spareSecondaryDiskPort	INTEGER
	spareShelf	INTEGER
	spareBay	INTEGER
	sparePool	DisplayString
	spareSectorSize	INTEGER
	spareDiskSerialNumber	DisplayString
	spareDiskVendor	DisplayString
	spareDiskModel	DisplayString
	spareDiskFirmwareRevision	DisplayString
	spareDiskRPM	DisplayString
	spareDiskType	DisplayString

OtherDiskEntry
SEQUENCE
	otherDiskIndex	INTEGER
	otherDiskDiskName	DisplayString
	otherDiskStatus	INTEGER
	otherDiskDiskId	INTEGER
	otherDiskScsiAdapter	DisplayString
	otherDiskScsiId	INTEGER	0..100
	otherDiskTotalMb	INTEGER
	otherDiskTotalBlocks	INTEGER
	otherDiskDiskPort	INTEGER
	otherDiskSecondaryDiskName	DisplayString
	otherDiskSecondaryDiskPort	INTEGER
	otherDiskShelf	INTEGER
	otherDiskBay	INTEGER
	otherDiskPool	DisplayString
	otherDiskSectorSize	INTEGER
	otherDiskSerialNumber	DisplayString
	otherDiskVendor	DisplayString
	otherDiskModel	DisplayString
	otherDiskFirmwareRevision	DisplayString
	otherDiskRPM	DisplayString
	otherDiskType	DisplayString

RaidPEntry
SEQUENCE
	raidPIndex	INTEGER
	raidPStatus	INTEGER
	raidPVol	INTEGER
	raidPPlex	INTEGER
	raidPGroup	INTEGER
	raidPPlexNumber	INTEGER	1..2
	raidPGroupNumber	INTEGER
	raidPDiskNumber	INTEGER	1..100
	raidPPlexName	DisplayString
	raidPDiskName	DisplayString
	raidPDiskPort	INTEGER
	raidPSecondaryDiskName	DisplayString
	raidPSecondaryDiskPort	INTEGER
	raidPScsiAdapter	DisplayString
	raidPScsiId	INTEGER	0..100
	raidPDiskId	INTEGER
	raidPShelf	INTEGER
	raidPBay	INTEGER
	raidPSectorSize	INTEGER
	raidPUsedMb	INTEGER
	raidPUsedBlocks	INTEGER
	raidPTotalMb	INTEGER
	raidPTotalBlocks	INTEGER
	raidPCompletionPerCent	INTEGER	0..100
	raidPDiskSerialNumber	DisplayString
	raidPDiskVendor	DisplayString
	raidPDiskModel	DisplayString
	raidPDiskFirmwareRevision	DisplayString
	raidPDiskRPM	DisplayString
	raidPDiskType	DisplayString
	raidPDiskPool	DisplayString
	raidPDiskCopyDestDiskName	DisplayString

PlexEntry
SEQUENCE
	plexIndex	INTEGER
	plexName	DisplayString
	plexVolName	DisplayString
	plexStatus	INTEGER
	plexPercentResyncing	INTEGER

OutOfDateDiskEntry
SEQUENCE
	outOfDateDiskIndex	INTEGER
	outOfDateDiskDiskName	DisplayString
	outOfDateDiskDiskId	INTEGER
	outOfDateDiskScsiAdapter	DisplayString
	outOfDateDiskScsiId	INTEGER	0..100
	outOfDateDiskTotalMb	INTEGER
	outOfDateDiskTotalBlocks	INTEGER
	outOfDateDiskDiskPort	INTEGER
	outOfDateDiskSecondaryDiskName	DisplayString
	outOfDateDiskSecondaryDiskPort	INTEGER
	outOfDateDiskShelf	INTEGER
	outOfDateDiskBay	INTEGER
	outOfDateDiskPool	DisplayString
	outOfDateDiskSectorSize	INTEGER
	outOfDateDiskSerialNumber	DisplayString
	outOfDateDiskVendor	DisplayString
	outOfDateDiskModel	DisplayString
	outOfDateDiskFirmwareRevision	DisplayString
	outOfDateDiskRPM	DisplayString
	outOfDateDiskType	DisplayString

AmEntry
SEQUENCE
	amIndex	INTEGER
	amAddress	IpAddress
	amPort	INTEGER	0..65535
	amStatus	INTEGER

NcHttpAccelEntry
SEQUENCE
	ncHttpAccelIndex	INTEGER
	ncHttpAccelKbytesFromClient	Counter
	ncHttpAccelKbytesToClient	Counter
	ncHttpAccelHits	Counter

NcHttpsAccelEntry
SEQUENCE
	ncHttpsAccelIndex	INTEGER
	ncHttpsAccelKbytesFromClient	Counter
	ncHttpsAccelKbytesToClient	Counter
	ncHttpsAccelHits	Counter

NcStreamingAccelEntry
SEQUENCE
	ncStreamingAccelIndex	INTEGER
	ncStreamingAccelKbytesFromClient	Counter
	ncStreamingAccelKbytesToClient	Counter
	ncStreamingAccelHits	Counter

SnapmirrorStatusEntry
SEQUENCE
	snapmirrorIndex	INTEGER
	snapmirrorSrc	OCTET STRING
	snapmirrorDst	OCTET STRING
	snapmirrorStatus	INTEGER
	snapmirrorState	INTEGER
	snapmirrorLag	TimeTicks
	snapmirrorTotalSuccesses	Counter
	snapmirrorTotalRestartSuccesses	Counter
	snapmirrorTotalFailures	Counter
	snapmirrorTotalDeferments	Counter
	snapmirrorTotalTransMBs	Counter
	snapmirrorTotalTransTimeSeconds	Counter
	snapmirrorThrottleValue	INTEGER
	snapmirrorMirrorTimestamp	DisplayString
	snapmirrorBaseSnapshot	DisplayString
	snapmirrorLastTransType	DisplayString
	snapmirrorLastTransMBs	Counter
	snapmirrorLastTransTimeSeconds	Counter
	snapmirrorSchedule	DisplayString
	snapmirrorScheduleDesc	DisplayString
	snapmirrorArguments	DisplayString
	snapmirrorSyncToAsync	Counter

SnapmirrorConnEntry
SEQUENCE
	snapmirrorConnIndex	INTEGER
	snapmirrorConnName	DisplayString
	snapmirrorConnType	INTEGER
	snapmirrorConnSrc1	DisplayString
	snapmirrorConnDst1	DisplayString
	snapmirrorConnSrc2	DisplayString
	snapmirrorConnDst2	DisplayString

SnapvaultStatusEntry
SEQUENCE
	svIndex	INTEGER
	svSrc	OCTET STRING
	svDst	OCTET STRING
	svStatus	INTEGER
	svState	INTEGER
	svLag	TimeTicks
	svTotalSuccesses	Counter
	svTotalRestartSuccesses	Counter
	svTotalFailures	Counter
	svTotalDeferments	Counter
	svTotalTransMBs	Counter
	svTotalTransTimeSeconds	Counter
	svThrottleValue	INTEGER
	svSrcSnapshotTime	INTEGER
	svBaseSnapshot	DisplayString
	svLastTransType	DisplayString
	svLastTransMBs	INTEGER
	svLastTransTimeSeconds	INTEGER

SnapvaultHostEntry
SEQUENCE
	svHostIndex	INTEGER
	svHostName	DisplayString
	svHostType	INTEGER
	svHostTotalSuccesses	INTEGER
	svHostTotalFailures	INTEGER
	svHostTotalDeferments	INTEGER

SnapvaultSchedEntry
SEQUENCE
	svSchedIndex	INTEGER
	svSchedVolume	DisplayString
	svSchedSnapshot	DisplayString
	svSchedStatus	INTEGER
	svSchedType	INTEGER
	svSchedSchedule	DisplayString

FabricEntry
SEQUENCE
	fabricIndex	INTEGER
	fabricStatus	INTEGER
	fabricStatusMessage	DisplayString
	fabricName	OCTET STRING	Size(8)
	fabricOwner	INTEGER

SwitchEntry
SEQUENCE
	switchIndex	INTEGER
	switchName	OCTET STRING	Size(8)
	switchSymbolicName	OCTET STRING	Size(0..255)
	switchType	INTEGER
	switchDomain	INTEGER
	switchManagementId	INTEGER
	switchStatus	INTEGER
	switchStatusMessage	DisplayString
	switchLinkSpeed	INTEGER
	switchHighPacketsProcessed	Counter
	switchLowPacketsProcessed	Counter
	switchHighPacketsRejected	Counter
	switchLowPacketsRejected	Counter
	switchFabricIndex	INTEGER

PortEntry
SEQUENCE
	portIndex	INTEGER
	portName	OCTET STRING	Size(8)
	portSwitchIndex	INTEGER
	portSwitchName	OCTET STRING	Size(8)
	portNumber	INTEGER
	portType	INTEGER
	portState	INTEGER
	portFabricIndex	INTEGER

DmpSubtreeEntry
SEQUENCE
	dmpIndex	INTEGER
	dmpStPath	DisplayString
	dmpStAttempts	Counter
	dmpStSuccesses	Counter
	dmpStFailures	Counter
	lastdump	OBJECT IDENTIFIER
	lastsuccess	OBJECT IDENTIFIER

DafsNicEntry
SEQUENCE
	dafsNicIndex	INTEGER
	dafsNicName	DisplayString
	dafsNicDevice	DisplayString
	dafsNicState	INTEGER
	dafsNicListenAddr	OCTET STRING
	dafsNicNumRqstDemons	INTEGER
	dafsNicInBytes	Counter
	dafsNicDirectInBytes	Counter
	dafsNicOutBytes	Counter
	dafsNicDirectOutBytes	Counter

DafsSessionEntry
SEQUENCE
	dafsSessionIndex	INTEGER
	dafsSessionId	OCTET STRING
	dafsSessionEndian	INTEGER
	dafsSessionAllowBackChannel	INTEGER
	dafsSessionAllowRdmaReadChannel	INTEGER
	dafsSessionUseChecksums	INTEGER
	dafsSessionMaxCredentials	INTEGER
	dafsSessionMaxRequestSize	INTEGER
	dafsSessionMaxResponseSize	INTEGER
	dafsSessionMaxRequests	INTEGER
	dafsSessionInlineWriteHeaderSize	INTEGER
	dafsSessionClientIdString	OCTET STRING
	dafsSessionClientVerifier	OCTET STRING
	dafsSessionNumCredentials	INTEGER
	dafsSessionNumRequests	INTEGER

DafsExportEntry
SEQUENCE
	dafsExportIndex	INTEGER
	dafsExportName	DisplayString
	dafsExportPath	DisplayString
	dafsExportEnabled	INTEGER
	dafsExportRwMode	INTEGER
	dafsExportAccessList	DisplayString

ViaConnEntry
SEQUENCE
	viaConnState	INTEGER
	viaConnVINumber	INTEGER
	viaConnRemoteNetAddress	IpAddress
	viaConnLocalNetAddress	IpAddress
	viaConnRemotePortNumber	INTEGER
	viaConnLocalPortNumber	INTEGER
	viaConnLocalDescriminator	OCTET STRING
	viaConnRemoteDescriminator	OCTET STRING
	viaConnLocalMaxTransferSize	INTEGER
	viaConnRemoteMaxTransferSize	INTEGER
	viaConnLocalEnableRdmaWrite	INTEGER
	viaConnLocalEnableRdmaRead	INTEGER
	viaConnRemoteEnableRdmaWrite	INTEGER
	viaConnRemoteEnableRdmaRead	INTEGER
	viaConnSentMessages	Counter
	viaConnSentRdmaReadMessages	Counter
	viaConnSentRdmaWriteMessages	Counter
	viaConnRcvdMessages	Counter
	viaConnRcvdRdmaReadMessages	Counter
	viaConnRcvdRdmaWriteMessages	Counter

ViaNicEntry
SEQUENCE
	viaNicIndex	INTEGER
	viaName	DisplayString
	viaHardwareVersion	DisplayString
	viaProviderVersion	DisplayString
	viaNicAddress	PhysAddress
	viaThreadSafe	INTEGER
	viaMaxDiscriminatorLength	INTEGER
	viaMaxRegisterBytes	INTEGER
	viaMaxRegisterRegions	INTEGER
	viaMaxRegisterBlockBytes	INTEGER
	viaMaxVI	INTEGER
	viaMaxDescriptorsPerQueue	INTEGER
	viaMaxSegmentsPerDesc	INTEGER
	viaMaxCQ	INTEGER
	viaMaxCQEntries	INTEGER
	viaMaxTransferSize	INTEGER
	viaNativeMTU	INTEGER
	viaMaxPTags	INTEGER
	viaCurrRegisterBytes	INTEGER
	viaCurrRegisterRegions	INTEGER
	viaCurrVI	INTEGER
	viaCurrCQ	INTEGER
	viaCurrPTags	INTEGER
	viaConnectionListenPort	INTEGER

VfEntry
SEQUENCE
	vfIndex	INTEGER
	vfName	DisplayString
	vfUuid	OCTET STRING	Size(0..36)
	vfIpAddresses	INTEGER
	vfStoragePaths	INTEGER
	vfIpSpace	DisplayString
	vfAllowedProtocols	INTEGER
	vfDisallowedProtocols	INTEGER
	vfState	INTEGER

VfIpEntry
SEQUENCE
	vfFiIndex	INTEGER
	vfIpIndex	INTEGER
	vfIpAddr	IpAddress

VfSpEntry
SEQUENCE
	vfFsIndex	INTEGER
	vfSpIndex	INTEGER
	vfSpName	OCTET STRING	Size(0..1024)

VfProEntry
SEQUENCE
	vfFpIndex	INTEGER
	vfProIndex	INTEGER
	vfProName	OCTET STRING	Size(0..1024)
	vfProStatus	INTEGER

LunEntry
SEQUENCE
	lunIndex	INTEGER
	lunName	DisplayString
	lunComment	DisplayString
	lunSizeLow	INTEGER
	lunSizeHigh	INTEGER
	lunMapped	INTEGER
	lunSerialNumber	DisplayString
	lunQtreeName	DisplayString
	lunHighOps	Counter
	lunLowOps	Counter
	lunHighReadBytes	Counter
	lunLowReadBytes	Counter
	lunHighWriteBytes	Counter
	lunLowWriteBytes	Counter
	lunHighErrors	Counter
	lunLowErrors	Counter
	lunOnline	INTEGER
	lunSnapStatus	INTEGER
	lunShareStatus	INTEGER
	lunSpaceReserved	INTEGER
	lunStatsResetTime	INTEGER
	lunHighReadOps	Counter
	lunLowReadOps	Counter
	lunHighWriteOps	Counter
	lunLowWriteOps	Counter
	lunHighOtherOps	Counter
	lunLowOtherOps	Counter

LunMapEntry
SEQUENCE
	lunMapLUNIndex	INTEGER
	lunMapInitiatorGroupIndex	INTEGER
	lunMapLUNName	DisplayString
	lunMapInitiatorGroupName	DisplayString
	lunMapLogicalUnitNumber	INTEGER

InitiatorGroupEntry
SEQUENCE
	initiatorGroupIndex	INTEGER
	initiatorGroupName	DisplayString
	initiatorGroupType	INTEGER
	initiatorGroupOS	INTEGER
	initiatorGroupThrottleReserve	INTEGER
	initiatorGroupThrottleBorrow	INTEGER
	initiatorGroupUsePartner	INTEGER

InitiatorGroupMemberEntry
SEQUENCE
	initiatorGroupMemberIndex	INTEGER
	initiatorGroupMemberNameIndex	INTEGER
	initiatorName	DisplayString

InitatorListMemberEntry
SEQUENCE
	initiatorListMemberEntryIndex	INTEGER
	targetAdapterName	DisplayString
	connectedInitiatorNodeName	DisplayString
	connectedInitiatorPortName	DisplayString
	connectedInitiatorType	INTEGER
	connectedInitiatorIsid	DisplayString
	connectedInitiatorPortalGroup	INTEGER

FcpTargetTableEntry
SEQUENCE
	fcpTargetTableIndex	INTEGER
	fcpTargetName	DisplayString
	fcpTargetNN	DisplayString
	fcpTargetPN	DisplayString
	fcpTargetSpeed	INTEGER
	fcpTargetStatus	INTEGER
	fcpTargetStandby	INTEGER
	fcpTargetTopology	INTEGER
	fcpTargetType	INTEGER

PortSetEntry
SEQUENCE
	psetIndex	INTEGER
	psetName	DisplayString
	psetType	INTEGER

PsetMemberEntry
SEQUENCE
	psetMemberIndex	INTEGER
	psetMemberNameIndex	INTEGER
	psetPortName	DisplayString

EnclEntry
SEQUENCE
	enclIndex	INTEGER
	enclContactState	INTEGER
	enclChannelShelfAddr	DisplayString
	enclProductLogicalID	DisplayString
	enclProductID	DisplayString
	enclProductVendor	DisplayString
	enclProductModel	DisplayString
	enclProductRevision	DisplayString
	enclProductSerialNo	DisplayString
	enclNumberDiskBays	INTEGER
	enclDisksPresent	DisplayString
	enclPowerSuppliesMaximum	INTEGER
	enclPowerSuppliesPresent	DisplayString
	enclPowerSuppliesSerialNos	DisplayString
	enclPowerSuppliesFailed	DisplayString
	enclFansMaximum	INTEGER
	enclFansPresent	DisplayString
	enclFansFailed	DisplayString
	enclTempSensorsMaximum	INTEGER
	enclTempSensorsPresent	DisplayString
	enclTempSensorsOverTempFail	DisplayString
	enclTempSensorsOverTempWarn	DisplayString
	enclTempSensorsUnderTempFail	DisplayString
	enclTempSensorsUnderTempWarn	DisplayString
	enclTempSensorsOverTempFailThr	DisplayString
	enclTempSensorsOverTempWarnThr	DisplayString
	enclTempSensorsUnderTempFailThr	DisplayString
	enclTempSensorsUnderTempWarnThr	DisplayString
	enclTempSensorsCurrentTemp	DisplayString
	enclElectronicsMaximum	INTEGER
	enclElectronicsPresent	DisplayString
	enclElectronicsSerialNos	DisplayString
	enclElectronicsFailed	DisplayString

NetIfEntry
SEQUENCE
	netifIndex	INTEGER
	netifDescr	DisplayString
	ifHighInOctets	Counter
	ifLowInOctets	Counter
	ifHighInUcastPkts	Counter
	ifLowInUcastPkts	Counter
	ifHighInNUcastPkts	Counter
	ifLowInNUcastPkts	Counter
	ifHighInDiscards	Counter
	ifLowInDiscards	Counter
	ifHighInErrors	Counter
	ifLowInErrors	Counter
	ifHighInUnknownProtos	Counter
	ifLowInUnknownProtos	Counter
	ifHighOutOctets	Counter
	ifLowOutOctets	Counter
	ifHighOutUcastPkts	Counter
	ifLowOutUcastPkts	Counter
	ifHighOutNUcastPkts	Counter
	ifLowOutNUcastPkts	Counter
	ifHighOutDiscards	Counter
	ifLowOutDiscards	Counter
	ifHighOutErrors	Counter
	ifLowOutErrors	Counter

Defined Values

netapp		1.3.6.1.4.1.789
OBJECT IDENTIFIER

netapp1		1.3.6.1.4.1.789.1
OBJECT IDENTIFIER

netappProducts		1.3.6.1.4.1.789.2
OBJECT IDENTIFIER

netappDataFabricManager		1.3.6.1.4.1.789.3
OBJECT IDENTIFIER

netappSupportConsole		1.3.6.1.4.1.789.4
OBJECT IDENTIFIER

netappFiler		1.3.6.1.4.1.789.2.1
OBJECT IDENTIFIER

netappNetCache		1.3.6.1.4.1.789.2.2
OBJECT IDENTIFIER

netappClusteredFiler		1.3.6.1.4.1.789.2.3
OBJECT IDENTIFIER

product		1.3.6.1.4.1.789.1.1
OBJECT IDENTIFIER

sysStat		1.3.6.1.4.1.789.1.2
OBJECT IDENTIFIER

nfs		1.3.6.1.4.1.789.1.3
OBJECT IDENTIFIER

quota		1.3.6.1.4.1.789.1.4
OBJECT IDENTIFIER

filesys		1.3.6.1.4.1.789.1.5
OBJECT IDENTIFIER

raid		1.3.6.1.4.1.789.1.6
OBJECT IDENTIFIER

cifs		1.3.6.1.4.1.789.1.7
OBJECT IDENTIFIER

netcache		1.3.6.1.4.1.789.1.8
OBJECT IDENTIFIER

snapmirror		1.3.6.1.4.1.789.1.9
OBJECT IDENTIFIER

ndmp		1.3.6.1.4.1.789.1.10
OBJECT IDENTIFIER

fabric		1.3.6.1.4.1.789.1.11
OBJECT IDENTIFIER

dafs		1.3.6.1.4.1.789.1.12
OBJECT IDENTIFIER

vi		1.3.6.1.4.1.789.1.13
OBJECT IDENTIFIER

backup		1.3.6.1.4.1.789.1.14
OBJECT IDENTIFIER

vfiler		1.3.6.1.4.1.789.1.16
OBJECT IDENTIFIER

blocks		1.3.6.1.4.1.789.1.17
OBJECT IDENTIFIER

nfscache		1.3.6.1.4.1.789.1.18
OBJECT IDENTIFIER

snapvault		1.3.6.1.4.1.789.1.19
OBJECT IDENTIFIER

ftpd		1.3.6.1.4.1.789.1.20
OBJECT IDENTIFIER

storage		1.3.6.1.4.1.789.1.21
OBJECT IDENTIFIER

network		1.3.6.1.4.1.789.1.22
OBJECT IDENTIFIER

productType		1.3.6.1.4.1.789.1.1.1
The product type representing the target platform.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	eisa-based(1), pci-based(2)

productVersion		1.3.6.1.4.1.789.1.1.2
Version String for the Software Running on this platform.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

productId		1.3.6.1.4.1.789.1.1.3
The System ID of this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

productVendor		1.3.6.1.4.1.789.1.1.4
The vendor id of this system, indicating the company that has supplied the product.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	netapp(1), dell(2), ibm(3)

productModel		1.3.6.1.4.1.789.1.1.5
The model name of the system. Examples are FAS980 and FAS3050.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

productFirmwareVersion		1.3.6.1.4.1.789.1.1.6
Version string for the Firmware running on this platform.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

productGuiUrl		1.3.6.1.4.1.789.1.1.7
The complete URL used to access the administrative GUI for a browser-based interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

productApiUrl		1.3.6.1.4.1.789.1.1.8
The complete URL used to access the administrative API for a programmatic interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

productSerialNum		1.3.6.1.4.1.789.1.1.9
The product serial number. Returns unknown if it cannot be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

productPartnerSerialNum		1.3.6.1.4.1.789.1.1.10
The partner's serial number, not applicable if there is no partner, and unknown if it cannot be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

productCPUArch		1.3.6.1.4.1.789.1.1.11
The CPU architecture type of this appliance
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	x86(1), alpha(2), mips(3), sparc(4)

productTrapData		1.3.6.1.4.1.789.1.1.12
This returns a static string. This object is used as a placeholder for enterprise traps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

productMachineType		1.3.6.1.4.1.789.1.1.13
The machine type of the system. Examples are FAS980 and FAS3050.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cpu		1.3.6.1.4.1.789.1.2.1
OBJECT IDENTIFIER

misc		1.3.6.1.4.1.789.1.2.2
OBJECT IDENTIFIER

cf		1.3.6.1.4.1.789.1.2.3
OBJECT IDENTIFIER

environment		1.3.6.1.4.1.789.1.2.4
OBJECT IDENTIFIER

nvram		1.3.6.1.4.1.789.1.2.5
OBJECT IDENTIFIER

cp		1.3.6.1.4.1.789.1.2.6
OBJECT IDENTIFIER

autosupport		1.3.6.1.4.1.789.1.2.7
OBJECT IDENTIFIER

cpuUpTime		1.3.6.1.4.1.789.1.2.1.1
The time (in hundredths of a second) that the CPU has been up since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

cpuBusyTime		1.3.6.1.4.1.789.1.2.1.2
The time (in hundredths of a second) that the CPU has been doing useful work since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

cpuBusyTimePerCent		1.3.6.1.4.1.789.1.2.1.3
The percent of time that the CPU has been doing useful work since the last time a client requested the cpuBusyTimePerCent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

cpuIdleTime		1.3.6.1.4.1.789.1.2.1.4
The time (in hundredths of a second) that the CPU has been idle since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

cpuIdleTimePerCent		1.3.6.1.4.1.789.1.2.1.5
The percent of time that the CPU has been idle since the last time a client requested the cpuBusyTimePerCent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

cpuCount		1.3.6.1.4.1.789.1.2.1.6
The number of CPUs in the system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2

cpuSwitchInvocations		1.3.6.1.4.1.789.1.2.1.7
The number of sk_switch invocations.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cpuContextSwitches		1.3.6.1.4.1.789.1.2.1.8
The number of hardware context switches.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cpuInterrupts		1.3.6.1.4.1.789.1.2.1.9
The number of interrupts during a CP.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cpuNonCPInterrupts		1.3.6.1.4.1.789.1.2.1.10
The number of interrupts not during a CP.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cpuCPInterruptPercent		1.3.6.1.4.1.789.1.2.1.11
The percentage of time handling CP interrupts.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

cpuNonCPInterruptPercent		1.3.6.1.4.1.789.1.2.1.12
The percentage of time handling non-cp interrupts.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

cpuTotalDomainSwitches		1.3.6.1.4.1.789.1.2.1.13
The total number of Domain Switches.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscNfsOps		1.3.6.1.4.1.789.1.2.2.1
The total number of Server side NFS calls since the last boot
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

miscNetRcvdKB		1.3.6.1.4.1.789.1.2.2.2
The total number of KBytes received on all the network interfaces, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

miscNetSentKB		1.3.6.1.4.1.789.1.2.2.3
The total number of KBytes transmitted on all the network interfaces, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

miscGlobalStatus		1.3.6.1.4.1.789.1.2.2.4
This indicates the overall status of the appliance. The algorithm to determine the value uses both hardware status (e.g. the number of failed fans) and volume status (e.g. number of volumes that are full). The algorithm is subject to change in future releases, but the range of values will not change.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6)

miscHighNfsOps		1.3.6.1.4.1.789.1.2.2.5
The total number of Server side NFS calls since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscLowNfsOps		1.3.6.1.4.1.789.1.2.2.6
The total number of Server side NFS calls since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscHighCifsOps		1.3.6.1.4.1.789.1.2.2.7
The total number of Server side CIFS calls since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscLowCifsOps		1.3.6.1.4.1.789.1.2.2.8
The total number of Server side CIFS calls since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscHighHttpOps		1.3.6.1.4.1.789.1.2.2.9
The total number of HTTP operations received since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscLowHttpOps		1.3.6.1.4.1.789.1.2.2.10
The total number of HTTP operations received since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscHighNetRcvdBytes		1.3.6.1.4.1.789.1.2.2.11
The total number of bytes received on all the network interfaces, since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscLowNetRcvdBytes		1.3.6.1.4.1.789.1.2.2.12
The total number of bytes received on all the network interfaces, since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscHighNetSentBytes		1.3.6.1.4.1.789.1.2.2.13
The total number of bytes transmitted on all the network interfaces, since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscLowNetSentBytes		1.3.6.1.4.1.789.1.2.2.14
The total number of bytes transmitted on all the network interfaces, since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscHighDiskReadBytes		1.3.6.1.4.1.789.1.2.2.15
The total number of bytes read from disk since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscLowDiskReadBytes		1.3.6.1.4.1.789.1.2.2.16
The total number of bytes read from disk since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscHighDiskWriteBytes		1.3.6.1.4.1.789.1.2.2.17
The total number of bytes written to disk since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscLowDiskWriteBytes		1.3.6.1.4.1.789.1.2.2.18
The total number of bytes written to disk since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscHighTapeReadBytes		1.3.6.1.4.1.789.1.2.2.19
The total number of bytes read from tape since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscLowTapeReadBytes		1.3.6.1.4.1.789.1.2.2.20
The total number of bytes read from tape since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscHighTapeWriteBytes		1.3.6.1.4.1.789.1.2.2.21
The total number of bytes written to tape since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscLowTapeWriteBytes		1.3.6.1.4.1.789.1.2.2.22
The total number of bytes written to tape since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscCacheAge		1.3.6.1.4.1.789.1.2.2.23
Age in minutes of the oldest read-only blocks in the buffer cache. This indicates how fast read operations are cycling through system memory; when the appliance is reading very large files (larger than the machine's memory size), buffer cache age will be very low.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

miscCorrectedMachineChecks		1.3.6.1.4.1.789.1.2.2.24
Number of corrected machine checks since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

miscGlobalStatusMessage		1.3.6.1.4.1.789.1.2.2.25
A string describing the global status, including a description of the condition (if any) that caused the status to be anything other than ok(3).
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

miscWindowsSetupWizardVersion		1.3.6.1.4.1.789.1.2.2.26
The version number of Windows Setup Wizard required to configure the appliance. Windows Setup Wizard with a version number lower than this integer is not capable of configuring the appliance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cfSettings		1.3.6.1.4.1.789.1.2.3.1
Clustered Failover configuration settings. The value notConfigured(1) indicates that the cluster is not licensed. The thisNodeDead(5) setting indicates that this node has been taken over.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notConfigured(1), enabled(2), disabled(3), takeoverByPartnerDisabled(4), thisNodeDead(5)

cfState		1.3.6.1.4.1.789.1.2.3.2
Clustered Failover state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	dead(1), canTakeover(2), cannotTakeover(3), takeover(4)

cfCannotTakeoverCause		1.3.6.1.4.1.789.1.2.3.3
The reason this node cannot takeover its partner
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), unknownReason(2), disabledByOperator(3), interconnectOffline(4), disabledByPartner(5), takeoverFailed(6)

cfPartnerStatus		1.3.6.1.4.1.789.1.2.3.4
This is the status last returned by the Clustered Failover partner.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	maybeDown(1), ok(2), dead(3)

cfPartnerLastStatusUpdate		1.3.6.1.4.1.789.1.2.3.5
If non-zero, the absolute time of the last update from the Clustered Failover partner.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

cfPartnerName		1.3.6.1.4.1.789.1.2.3.6
Hostname for Clustered Failover partner.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cfPartnerSysid		1.3.6.1.4.1.789.1.2.3.7
System ID for Clustered Failover partner.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cfInterconnectStatus		1.3.6.1.4.1.789.1.2.3.8
The current status of the interconnect. The partialFailure(3) status indicates that one of the links in the interconnect hardware is down.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notPresent(1), down(2), partialFailure(3), up(4)

envOverTemperature		1.3.6.1.4.1.789.1.2.4.1
An indication of whether the hardware is currently operating outside of its recommended temperature range. The hardware will shutdown if the temperature exceeds critical thresholds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

envFailedFanCount		1.3.6.1.4.1.789.1.2.4.2
Count of the number of chassis fans which are not operating within the recommended RPM range.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

envFailedFanMessage		1.3.6.1.4.1.789.1.2.4.3
Text message describing the current condition of chassis fans. This is useful only if envFailedFanCount is not zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

envFailedPowerSupplyCount		1.3.6.1.4.1.789.1.2.4.4
Count of the number of power supplies which are in degraded mode.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

envFailedPowerSupplyMessage		1.3.6.1.4.1.789.1.2.4.5
Text message describing the state of any power supplies which are currently degraded. This is useful only if envFailedPowerSupplyCount is not zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

nvramBatteryStatus		1.3.6.1.4.1.789.1.2.5.1
An indication of the current status of the NVRAM battery or batteries. Batteries which are fully or partially discharged may not fully protect the system during a crash. The end-of-life status values are based on the manufacturer's recommended life for the batteries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), partiallyDischarged(2), fullyDischarged(3), notPresent(4), nearEndOfLife(5), atEndOfLife(6), unknown(7), overCharged(8), fullyCharged(9)

cpTime		1.3.6.1.4.1.789.1.2.6.1
The time (in hundredths of a second) since boot during which the system has had a consistency point (cp) operation in progress.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

cpFromTimerOps		1.3.6.1.4.1.789.1.2.6.2
The number of consistency point operations since boot that were caused by timer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cpFromSnapshotOps		1.3.6.1.4.1.789.1.2.6.3
The number of consistency point operations since boot that were caused by snapshot operation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cpFromLowWaterOps		1.3.6.1.4.1.789.1.2.6.4
The number of consistency point operations since boot that were caused by low water mark.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cpFromHighWaterOps		1.3.6.1.4.1.789.1.2.6.5
The number of consistency point operations since boot that were caused by high water mark.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cpFromLogFullOps		1.3.6.1.4.1.789.1.2.6.6
The number of consistency point operations since boot that were caused by nv-log full.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cpFromCpOps		1.3.6.1.4.1.789.1.2.6.7
The number of back to back consistency point operations since boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cpTotalOps		1.3.6.1.4.1.789.1.2.6.8
The total number of consistency point operations since boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cpFromFlushOps		1.3.6.1.4.1.789.1.2.6.9
The number of consistency point operations since boot that were caused by flushing unlogged write data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cpFromSyncOps		1.3.6.1.4.1.789.1.2.6.10
The number of consistency point operations since boot that were caused by file system sync requests.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cpFromLowVbufOps		1.3.6.1.4.1.789.1.2.6.11
The number of consistency point operations since boot that were caused by low virtual buffers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cpFromCpDeferredOps		1.3.6.1.4.1.789.1.2.6.12
The number of back to back consistency point operations since boot that were deferred.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cpFromLowDatavecsOps		1.3.6.1.4.1.789.1.2.6.13
The number of consistency point operations since boot that were caused by low datavecs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

autosupportStatus		1.3.6.1.4.1.789.1.2.7.1
An indication of the current status of autosupport on the appliance. describes the success or failure of most recent attempts to send autosupports.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), smtpFailure(2), postFailure(3), smtp-postFailure(4), unknown(5)

autosupportStatusMessage		1.3.6.1.4.1.789.1.2.7.2
A string describing the autosupport status, including a description of the condition (if any) that caused the status to be anything other than ok(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

autosupportSuccessfulSends		1.3.6.1.4.1.789.1.2.7.3
Count of the number of autosupport messages successfully sent since the last reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

autosupportFailedSends		1.3.6.1.4.1.789.1.2.7.4
Count of the number of autosupport messages not sent successfully since the last reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

curNfs		1.3.6.1.4.1.789.1.3.1
OBJECT IDENTIFIER

totNfs		1.3.6.1.4.1.789.1.3.2
OBJECT IDENTIFIER

nfsOptions		1.3.6.1.4.1.789.1.3.3
OBJECT IDENTIFIER

rpcServ		1.3.6.1.4.1.789.1.3.1.1
OBJECT IDENTIFIER

nfsServ		1.3.6.1.4.1.789.1.3.1.2
OBJECT IDENTIFIER

nfsPerClient		1.3.6.1.4.1.789.1.3.1.3
OBJECT IDENTIFIER

rpcCalls		1.3.6.1.4.1.789.1.3.1.1.1
The total number of RPC calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rpcBadCalls		1.3.6.1.4.1.789.1.3.1.1.2
The total number of calls rejected by the RPC layer, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rpcNullRecvs		1.3.6.1.4.1.789.1.3.1.1.3
The number of times an RPC call was not available when it was thought to be received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rpcBadLens		1.3.6.1.4.1.789.1.3.1.1.4
The number of RPC calls received with a length shorter than a minimum-sized RPC call, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rpcServXDRCalls		1.3.6.1.4.1.789.1.3.1.1.5
The number of RPC calls received whose header could not be XDR decoded, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rcpTcpCalls		1.3.6.1.4.1.789.1.3.1.1.6
The total number of RPC calls received for the TCP protocol, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rcpTcpBadCalls		1.3.6.1.4.1.789.1.3.1.1.7
The total number of calls rejected by the RPC layer for the TCP protocol, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rcpTcpNullRecvs		1.3.6.1.4.1.789.1.3.1.1.8
The number of times an RPC call for the TCP protocol was not available when it was thought to be received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rcpTcpBadLens		1.3.6.1.4.1.789.1.3.1.1.9
The number of RPC calls for the TCP protocol received with a length shorter than a minimum-sized RPC call, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rcpTcpServXDRCalls		1.3.6.1.4.1.789.1.3.1.1.10
The number of RPC calls for the TCP protocol received whose header could not be XDR decoded, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rpcUdpCalls		1.3.6.1.4.1.789.1.3.1.1.11
The total number of RPC calls received for the UDP protocol, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rpcUdpBadCalls		1.3.6.1.4.1.789.1.3.1.1.12
The total number of calls rejected by the RPC layer for the UDP protocol, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rpcUdpNullRecvs		1.3.6.1.4.1.789.1.3.1.1.13
The number of times an RPC call for the UDP protocol was not available when it was thought to be received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rpcUdpBadLens		1.3.6.1.4.1.789.1.3.1.1.14
The number of RPC calls for the UDP protocol received with a length shorter than a minimum-sized RPC call, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rpcUdpServXDRCalls		1.3.6.1.4.1.789.1.3.1.1.15
The number of RPC calls for the UDP protocol received whose header could not be XDR decoded, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCalls		1.3.6.1.4.1.789.1.3.1.2.1
The total number of NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsServBadCalls		1.3.6.1.4.1.789.1.3.1.2.2
The total number of received NFS calls rejected, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsV2		1.3.6.1.4.1.789.1.3.1.2.3
OBJECT IDENTIFIER

nfsV3		1.3.6.1.4.1.789.1.3.1.2.4
OBJECT IDENTIFIER

replyCache		1.3.6.1.4.1.789.1.3.1.2.5
OBJECT IDENTIFIER

nfsrwStats		1.3.6.1.4.1.789.1.3.1.2.6
OBJECT IDENTIFIER

v2Calls		1.3.6.1.4.1.789.1.3.1.2.3.1
OBJECT IDENTIFIER

v2Percent		1.3.6.1.4.1.789.1.3.1.2.3.2
OBJECT IDENTIFIER

v2CachedCalls		1.3.6.1.4.1.789.1.3.1.2.3.3
OBJECT IDENTIFIER

v2CachedPerCent		1.3.6.1.4.1.789.1.3.1.2.3.4
OBJECT IDENTIFIER

v2cNulls		1.3.6.1.4.1.789.1.3.1.2.3.1.1
The number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cGetattrs		1.3.6.1.4.1.789.1.3.1.2.3.1.2
The number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cSetattrs		1.3.6.1.4.1.789.1.3.1.2.3.1.3
The number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cRoots		1.3.6.1.4.1.789.1.3.1.2.3.1.4
The number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cLookups		1.3.6.1.4.1.789.1.3.1.2.3.1.5
The number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cReadlinks		1.3.6.1.4.1.789.1.3.1.2.3.1.6
The number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cReads		1.3.6.1.4.1.789.1.3.1.2.3.1.7
The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cWrcaches		1.3.6.1.4.1.789.1.3.1.2.3.1.8
The number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cWrites		1.3.6.1.4.1.789.1.3.1.2.3.1.9
The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cCreates		1.3.6.1.4.1.789.1.3.1.2.3.1.10
The number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cRemoves		1.3.6.1.4.1.789.1.3.1.2.3.1.11
The number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cRenames		1.3.6.1.4.1.789.1.3.1.2.3.1.12
The number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cLinks		1.3.6.1.4.1.789.1.3.1.2.3.1.13
The number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cSymlinks		1.3.6.1.4.1.789.1.3.1.2.3.1.14
The number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cMkdirs		1.3.6.1.4.1.789.1.3.1.2.3.1.15
The number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cRmdirs		1.3.6.1.4.1.789.1.3.1.2.3.1.16
The number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cReaddirs		1.3.6.1.4.1.789.1.3.1.2.3.1.17
The number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cStatfss		1.3.6.1.4.1.789.1.3.1.2.3.1.18
The number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2pNulls		1.3.6.1.4.1.789.1.3.1.2.3.2.1
The number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pGetattrs		1.3.6.1.4.1.789.1.3.1.2.3.2.2
The number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pSetattrs		1.3.6.1.4.1.789.1.3.1.2.3.2.3
The number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pRoots		1.3.6.1.4.1.789.1.3.1.2.3.2.4
The number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pLookups		1.3.6.1.4.1.789.1.3.1.2.3.2.5
The number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pReadlinks		1.3.6.1.4.1.789.1.3.1.2.3.2.6
The number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pReads		1.3.6.1.4.1.789.1.3.1.2.3.2.7
The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pWrcaches		1.3.6.1.4.1.789.1.3.1.2.3.2.8
The number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pWrites		1.3.6.1.4.1.789.1.3.1.2.3.2.9
The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pCreates		1.3.6.1.4.1.789.1.3.1.2.3.2.10
The number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pRemoves		1.3.6.1.4.1.789.1.3.1.2.3.2.11
The number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pRenames		1.3.6.1.4.1.789.1.3.1.2.3.2.12
The number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pLinks		1.3.6.1.4.1.789.1.3.1.2.3.2.13
The number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pSymlinks		1.3.6.1.4.1.789.1.3.1.2.3.2.14
The number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pMkdirs		1.3.6.1.4.1.789.1.3.1.2.3.2.15
The number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pRmdirs		1.3.6.1.4.1.789.1.3.1.2.3.2.16
The number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pReaddirs		1.3.6.1.4.1.789.1.3.1.2.3.2.17
The number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2pStatfss		1.3.6.1.4.1.789.1.3.1.2.3.2.18
The number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2ccNulls		1.3.6.1.4.1.789.1.3.1.2.3.3.1
The number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccGetattrs		1.3.6.1.4.1.789.1.3.1.2.3.3.2
The number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccSetattrs		1.3.6.1.4.1.789.1.3.1.2.3.3.3
The number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccRoots		1.3.6.1.4.1.789.1.3.1.2.3.3.4
The number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccLookups		1.3.6.1.4.1.789.1.3.1.2.3.3.5
The number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccReadlinks		1.3.6.1.4.1.789.1.3.1.2.3.3.6
The number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccReads		1.3.6.1.4.1.789.1.3.1.2.3.3.7
The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccWrcaches		1.3.6.1.4.1.789.1.3.1.2.3.3.8
The number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccWrites		1.3.6.1.4.1.789.1.3.1.2.3.3.9
The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccCreates		1.3.6.1.4.1.789.1.3.1.2.3.3.10
The number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccRemoves		1.3.6.1.4.1.789.1.3.1.2.3.3.11
The number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccRenames		1.3.6.1.4.1.789.1.3.1.2.3.3.12
The number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccLinks		1.3.6.1.4.1.789.1.3.1.2.3.3.13
The number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccSymlinks		1.3.6.1.4.1.789.1.3.1.2.3.3.14
The number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccMkdirs		1.3.6.1.4.1.789.1.3.1.2.3.3.15
The number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccRmdirs		1.3.6.1.4.1.789.1.3.1.2.3.3.16
The number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccReaddirs		1.3.6.1.4.1.789.1.3.1.2.3.3.17
The number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ccStatfss		1.3.6.1.4.1.789.1.3.1.2.3.3.18
The number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2cpNulls		1.3.6.1.4.1.789.1.3.1.2.3.4.1
The number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpGetattrs		1.3.6.1.4.1.789.1.3.1.2.3.4.2
The number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpSetattrs		1.3.6.1.4.1.789.1.3.1.2.3.4.3
The number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpRoots		1.3.6.1.4.1.789.1.3.1.2.3.4.4
The number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpLookups		1.3.6.1.4.1.789.1.3.1.2.3.4.5
The number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpReadlinks		1.3.6.1.4.1.789.1.3.1.2.3.4.6
The number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpReads		1.3.6.1.4.1.789.1.3.1.2.3.4.7
The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpWrcaches		1.3.6.1.4.1.789.1.3.1.2.3.4.8
The number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpWrites		1.3.6.1.4.1.789.1.3.1.2.3.4.9
The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpCreates		1.3.6.1.4.1.789.1.3.1.2.3.4.10
The number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpRemoves		1.3.6.1.4.1.789.1.3.1.2.3.4.11
The number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpRenames		1.3.6.1.4.1.789.1.3.1.2.3.4.12
The number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpLinks		1.3.6.1.4.1.789.1.3.1.2.3.4.13
The number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpSymlinks		1.3.6.1.4.1.789.1.3.1.2.3.4.14
The number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpMkdirs		1.3.6.1.4.1.789.1.3.1.2.3.4.15
The number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpRmdirs		1.3.6.1.4.1.789.1.3.1.2.3.4.16
The number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpReaddirs		1.3.6.1.4.1.789.1.3.1.2.3.4.17
The number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v2cpStatfss		1.3.6.1.4.1.789.1.3.1.2.3.4.18
The number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3Calls		1.3.6.1.4.1.789.1.3.1.2.4.1
OBJECT IDENTIFIER

v3Percent		1.3.6.1.4.1.789.1.3.1.2.4.2
OBJECT IDENTIFIER

v3CachedCalls		1.3.6.1.4.1.789.1.3.1.2.4.3
OBJECT IDENTIFIER

v3CachedPerCent		1.3.6.1.4.1.789.1.3.1.2.4.4
OBJECT IDENTIFIER

v3cNulls		1.3.6.1.4.1.789.1.3.1.2.4.1.1
The number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cGetattrs		1.3.6.1.4.1.789.1.3.1.2.4.1.2
The number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cSetattrs		1.3.6.1.4.1.789.1.3.1.2.4.1.3
The number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cLookups		1.3.6.1.4.1.789.1.3.1.2.4.1.4
The number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cAccesss		1.3.6.1.4.1.789.1.3.1.2.4.1.5
The number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cReadlinks		1.3.6.1.4.1.789.1.3.1.2.4.1.6
The number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cReads		1.3.6.1.4.1.789.1.3.1.2.4.1.7
The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cWrites		1.3.6.1.4.1.789.1.3.1.2.4.1.8
The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cCreates		1.3.6.1.4.1.789.1.3.1.2.4.1.9
The number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cMkdirs		1.3.6.1.4.1.789.1.3.1.2.4.1.10
The number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cSymlinks		1.3.6.1.4.1.789.1.3.1.2.4.1.11
The number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cMknods		1.3.6.1.4.1.789.1.3.1.2.4.1.12
The number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cRemoves		1.3.6.1.4.1.789.1.3.1.2.4.1.13
The number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cRmdirs		1.3.6.1.4.1.789.1.3.1.2.4.1.14
The number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cRenames		1.3.6.1.4.1.789.1.3.1.2.4.1.15
The number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cLinks		1.3.6.1.4.1.789.1.3.1.2.4.1.16
The number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cReaddirs		1.3.6.1.4.1.789.1.3.1.2.4.1.17
The number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cReaddirPluss		1.3.6.1.4.1.789.1.3.1.2.4.1.18
The number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cFsstats		1.3.6.1.4.1.789.1.3.1.2.4.1.19
The number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cFsinfos		1.3.6.1.4.1.789.1.3.1.2.4.1.20
The number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cPathconfs		1.3.6.1.4.1.789.1.3.1.2.4.1.21
The number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cCommits		1.3.6.1.4.1.789.1.3.1.2.4.1.22
The number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3pNulls		1.3.6.1.4.1.789.1.3.1.2.4.2.1
The number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pGetattrs		1.3.6.1.4.1.789.1.3.1.2.4.2.2
The number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pSetattrs		1.3.6.1.4.1.789.1.3.1.2.4.2.3
The number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pLookups		1.3.6.1.4.1.789.1.3.1.2.4.2.4
The number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pAccesss		1.3.6.1.4.1.789.1.3.1.2.4.2.5
The number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pReadlinks		1.3.6.1.4.1.789.1.3.1.2.4.2.6
The number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pReads		1.3.6.1.4.1.789.1.3.1.2.4.2.7
The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pWrites		1.3.6.1.4.1.789.1.3.1.2.4.2.8
The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pCreates		1.3.6.1.4.1.789.1.3.1.2.4.2.9
The number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pMkdirs		1.3.6.1.4.1.789.1.3.1.2.4.2.10
The number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pSymlinks		1.3.6.1.4.1.789.1.3.1.2.4.2.11
The number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pMknods		1.3.6.1.4.1.789.1.3.1.2.4.2.12
The number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pRemoves		1.3.6.1.4.1.789.1.3.1.2.4.2.13
The number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pRmdirs		1.3.6.1.4.1.789.1.3.1.2.4.2.14
The number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pRenames		1.3.6.1.4.1.789.1.3.1.2.4.2.15
The number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pLinks		1.3.6.1.4.1.789.1.3.1.2.4.2.16
The number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pReaddirs		1.3.6.1.4.1.789.1.3.1.2.4.2.17
The number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pReaddirPluss		1.3.6.1.4.1.789.1.3.1.2.4.2.18
The number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pFsstats		1.3.6.1.4.1.789.1.3.1.2.4.2.19
The number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pFsinfos		1.3.6.1.4.1.789.1.3.1.2.4.2.20
The number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pPathconfs		1.3.6.1.4.1.789.1.3.1.2.4.2.21
The number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3pCommits		1.3.6.1.4.1.789.1.3.1.2.4.2.22
The number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3ccNulls		1.3.6.1.4.1.789.1.3.1.2.4.3.1
The number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccGetattrs		1.3.6.1.4.1.789.1.3.1.2.4.3.2
The number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccSetattrs		1.3.6.1.4.1.789.1.3.1.2.4.3.3
The number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccLookups		1.3.6.1.4.1.789.1.3.1.2.4.3.4
The number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccAccesss		1.3.6.1.4.1.789.1.3.1.2.4.3.5
The number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccReadlinks		1.3.6.1.4.1.789.1.3.1.2.4.3.6
The number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccReads		1.3.6.1.4.1.789.1.3.1.2.4.3.7
The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccWrites		1.3.6.1.4.1.789.1.3.1.2.4.3.8
The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccCreates		1.3.6.1.4.1.789.1.3.1.2.4.3.9
The number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccMkdirs		1.3.6.1.4.1.789.1.3.1.2.4.3.10
The number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccSymlinks		1.3.6.1.4.1.789.1.3.1.2.4.3.11
The number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccMknods		1.3.6.1.4.1.789.1.3.1.2.4.3.12
The number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccRemoves		1.3.6.1.4.1.789.1.3.1.2.4.3.13
The number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccRmdirs		1.3.6.1.4.1.789.1.3.1.2.4.3.14
The number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccRenames		1.3.6.1.4.1.789.1.3.1.2.4.3.15
The number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccLinks		1.3.6.1.4.1.789.1.3.1.2.4.3.16
The number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccReaddirs		1.3.6.1.4.1.789.1.3.1.2.4.3.17
The number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccReaddirPluss		1.3.6.1.4.1.789.1.3.1.2.4.3.18
The number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccFsstats		1.3.6.1.4.1.789.1.3.1.2.4.3.19
The number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccFsinfos		1.3.6.1.4.1.789.1.3.1.2.4.3.20
The number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccPathconfs		1.3.6.1.4.1.789.1.3.1.2.4.3.21
The number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3ccCommits		1.3.6.1.4.1.789.1.3.1.2.4.3.22
The number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3cpNulls		1.3.6.1.4.1.789.1.3.1.2.4.4.1
The number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpGetattrs		1.3.6.1.4.1.789.1.3.1.2.4.4.2
The number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpSetattrs		1.3.6.1.4.1.789.1.3.1.2.4.4.3
The number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpLookups		1.3.6.1.4.1.789.1.3.1.2.4.4.4
The number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpAccesss		1.3.6.1.4.1.789.1.3.1.2.4.4.5
The number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpReadlinks		1.3.6.1.4.1.789.1.3.1.2.4.4.6
The number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpReads		1.3.6.1.4.1.789.1.3.1.2.4.4.7
The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpWrites		1.3.6.1.4.1.789.1.3.1.2.4.4.8
The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpCreates		1.3.6.1.4.1.789.1.3.1.2.4.4.9
The number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpMkdirs		1.3.6.1.4.1.789.1.3.1.2.4.4.10
The number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpSymlinks		1.3.6.1.4.1.789.1.3.1.2.4.4.11
The number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpMknods		1.3.6.1.4.1.789.1.3.1.2.4.4.12
The number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpRemoves		1.3.6.1.4.1.789.1.3.1.2.4.4.13
The number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpRmdirs		1.3.6.1.4.1.789.1.3.1.2.4.4.14
The number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpRenames		1.3.6.1.4.1.789.1.3.1.2.4.4.15
The number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpLinks		1.3.6.1.4.1.789.1.3.1.2.4.4.16
The number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpReaddirs		1.3.6.1.4.1.789.1.3.1.2.4.4.17
The number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpReaddirPluss		1.3.6.1.4.1.789.1.3.1.2.4.4.18
The number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpFsstats		1.3.6.1.4.1.789.1.3.1.2.4.4.19
The number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpFsinfos		1.3.6.1.4.1.789.1.3.1.2.4.4.20
The number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpPathconfs		1.3.6.1.4.1.789.1.3.1.2.4.4.21
The number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

v3cpCommits		1.3.6.1.4.1.789.1.3.1.2.4.4.22
The number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

rcInProgressHits		1.3.6.1.4.1.789.1.3.1.2.5.1
The number of NFS requests that were dropped, for calls already in progress, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rcDelayHits		1.3.6.1.4.1.789.1.3.1.2.5.2
The number of NFS requests that were dropped, for replies already generated within a short interval, since the last time the statistics were cleared. These stats are deprecated. A value of zero will always be returned for these stats.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

rcMisses		1.3.6.1.4.1.789.1.3.1.2.5.3
The number of NFS requests received for which there were no corresponding entries already in the Reply Cache, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rcNonIdemDoneHits		1.3.6.1.4.1.789.1.3.1.2.5.4
The number of NFS requests received that resulted in replies being replayed from the Reply Cache, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rcNonIdemNotDoneHits		1.3.6.1.4.1.789.1.3.1.2.5.5
The number of NFS requests received for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rcTcpInProgressHits		1.3.6.1.4.1.789.1.3.1.2.5.6
The number of NFS requests that were dropped for the TCP protocol, for calls already in progress, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rcTcpDelayHits		1.3.6.1.4.1.789.1.3.1.2.5.7
The number of NFS requests that were dropped for the TCP protocol, for replies already generated within a short interval, since the last time the statistics were cleared. These stats are deprecated. A value of zero will always be returned for these stats.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

rcTcpMisses		1.3.6.1.4.1.789.1.3.1.2.5.8
The number of NFS requests received for the TCP protocol for which there were no corresponding entries already in the Reply Cache, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rcTcpNonIdemDoneHits		1.3.6.1.4.1.789.1.3.1.2.5.9
The number of NFS requests received for the TCP protocol that resulted in replies being replayed from the Reply Cache, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rcTcpNonIdemNotDoneHits		1.3.6.1.4.1.789.1.3.1.2.5.10
The number of NFS requests received for the TCP protocol for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rcUdpInProgressHits		1.3.6.1.4.1.789.1.3.1.2.5.11
The number of NFS requests that were dropped for the UDP protocol, for calls already in progress, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rcUdpDelayHits		1.3.6.1.4.1.789.1.3.1.2.5.12
The number of NFS requests that were dropped for the UDP protocol, for replies already generated within a short interval, since the last time the statistics were cleared. These stats are deprecated. A value of zero will always be returned for these stats.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

rcUdpMisses		1.3.6.1.4.1.789.1.3.1.2.5.13
The number of NFS requests received for the UDP protocol for which there were no corresponding entries already in the Reply Cache, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rcUdpNonIdemDoneHits		1.3.6.1.4.1.789.1.3.1.2.5.14
The number of NFS requests received for the UDP protocol that resulted in replies being replayed from the Reply Cache, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rcUdpNonIdemNotDoneHits		1.3.6.1.4.1.789.1.3.1.2.5.15
The number of NFS requests received for the UDP protocol for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2ReadStats		1.3.6.1.4.1.789.1.3.1.2.6.1
OBJECT IDENTIFIER

v2WriteStats		1.3.6.1.4.1.789.1.3.1.2.6.2
OBJECT IDENTIFIER

v3ReadStats		1.3.6.1.4.1.789.1.3.1.2.6.3
OBJECT IDENTIFIER

v3WriteStats		1.3.6.1.4.1.789.1.3.1.2.6.4
OBJECT IDENTIFIER

v2Read512Calls		1.3.6.1.4.1.789.1.3.1.2.6.1.1
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 0-511 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Read1KCalls		1.3.6.1.4.1.789.1.3.1.2.6.1.2
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 512-1023 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Read2KCalls		1.3.6.1.4.1.789.1.3.1.2.6.1.3
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 1K-2047 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Read4KCalls		1.3.6.1.4.1.789.1.3.1.2.6.1.4
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 2K-4095 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Read8KCalls		1.3.6.1.4.1.789.1.3.1.2.6.1.5
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 4K-8191 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Read16KCalls		1.3.6.1.4.1.789.1.3.1.2.6.1.6
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 8K-16383 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Read32KCalls		1.3.6.1.4.1.789.1.3.1.2.6.1.7
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 16K-32767 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Read64KCalls		1.3.6.1.4.1.789.1.3.1.2.6.1.8
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 32K-65535 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Read128KCalls		1.3.6.1.4.1.789.1.3.1.2.6.1.9
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 64K-131071 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Write512Calls		1.3.6.1.4.1.789.1.3.1.2.6.2.1
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 0-511 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Write1KCalls		1.3.6.1.4.1.789.1.3.1.2.6.2.2
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 512-1023 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Write2KCalls		1.3.6.1.4.1.789.1.3.1.2.6.2.3
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 1K-2047 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Write4KCalls		1.3.6.1.4.1.789.1.3.1.2.6.2.4
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 2K-4095 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Write8KCalls		1.3.6.1.4.1.789.1.3.1.2.6.2.5
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 4K-8191 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Write16KCalls		1.3.6.1.4.1.789.1.3.1.2.6.2.6
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 8K-16383 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Write32KCalls		1.3.6.1.4.1.789.1.3.1.2.6.2.7
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 16K-32767 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Write64KCalls		1.3.6.1.4.1.789.1.3.1.2.6.2.8
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 32K-65535 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v2Write128KCalls		1.3.6.1.4.1.789.1.3.1.2.6.2.9
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 64K-131071 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Read512Calls		1.3.6.1.4.1.789.1.3.1.2.6.3.1
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 0-511 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Read1KCalls		1.3.6.1.4.1.789.1.3.1.2.6.3.2
The number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 512-1023 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Read2KCalls		1.3.6.1.4.1.789.1.3.1.2.6.3.3
The number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 1K-2047 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Read4KCalls		1.3.6.1.4.1.789.1.3.1.2.6.3.4
The number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 2K-4095 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Read8KCalls		1.3.6.1.4.1.789.1.3.1.2.6.3.5
The number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 4K-8191 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Read16KCalls		1.3.6.1.4.1.789.1.3.1.2.6.3.6
The number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 8K-16383 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Read32KCalls		1.3.6.1.4.1.789.1.3.1.2.6.3.7
The number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 16K-32767 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Read64KCalls		1.3.6.1.4.1.789.1.3.1.2.6.3.8
The number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 32K-65535 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Read128KCalls		1.3.6.1.4.1.789.1.3.1.2.6.3.9
The number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 64K-131071 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Write512Calls		1.3.6.1.4.1.789.1.3.1.2.6.4.1
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 0-511 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Write1KCalls		1.3.6.1.4.1.789.1.3.1.2.6.4.2
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 512-1023 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Write2KCalls		1.3.6.1.4.1.789.1.3.1.2.6.4.3
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 1K-2047 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Write4KCalls		1.3.6.1.4.1.789.1.3.1.2.6.4.4
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 2K-4095 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Write8KCalls		1.3.6.1.4.1.789.1.3.1.2.6.4.5
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 4K-8191 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Write16KCalls		1.3.6.1.4.1.789.1.3.1.2.6.4.6
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 8K-16383 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Write32KCalls		1.3.6.1.4.1.789.1.3.1.2.6.4.7
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 16K-32767 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Write64KCalls		1.3.6.1.4.1.789.1.3.1.2.6.4.8
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 32K-65535 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

v3Write128KCalls		1.3.6.1.4.1.789.1.3.1.2.6.4.9
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 64K-131071 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclTable		1.3.6.1.4.1.789.1.3.1.3.1
Provide a report of per-client NFS statistics since the last time the statistics were cleared.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PclEntry

pclEntry		1.3.6.1.4.1.789.1.3.1.3.1.1
Provide a report of NFS statistics for the referenced NFS client since the last time the statistics were cleared.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PclEntry

pclIpAddr		1.3.6.1.4.1.789.1.3.1.3.1.1.1
The IP address of the referenced client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

pclRpcCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.2
The total number of RPC calls received from the referenced client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclRpcBadCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.3
The total number of calls received from the referenced client that were rejected by the RPC layer, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclRpcNullRecvs		1.3.6.1.4.1.789.1.3.1.3.1.1.4
The number of times an RPC call was not available when it was thought to be received from referenced client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclRpcBadLens		1.3.6.1.4.1.789.1.3.1.3.1.1.5
The number of RPC calls received from the referenced client with a length shorter than a minimum-sized RPC call, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclRpcServXDRCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.6
The number of RPC calls received from the referenced client whose header could not be XDR decoded, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.7
The total number of NFS calls received from the referenced client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsServBadCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.8
The total number of NFS calls received from the referenced client that were rejected, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Nulls		1.3.6.1.4.1.789.1.3.1.3.1.1.9
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_NULL (Do Nothing) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Getattrs		1.3.6.1.4.1.789.1.3.1.3.1.1.10
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_GETATTR (Get File Attributes) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Setattrs		1.3.6.1.4.1.789.1.3.1.3.1.1.11
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_SETATTR (Set File Attributes) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Roots		1.3.6.1.4.1.789.1.3.1.3.1.1.12
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_ROOT (Get Filesystem Root) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Lookups		1.3.6.1.4.1.789.1.3.1.3.1.1.13
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_LOOKUP (Look Up File Name) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Readlinks		1.3.6.1.4.1.789.1.3.1.3.1.1.14
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_READLINK (Read From Symbolic Link) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Reads		1.3.6.1.4.1.789.1.3.1.3.1.1.15
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_READ (Read From File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Wrcaches		1.3.6.1.4.1.789.1.3.1.3.1.1.16
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_WRITECACHE (Write to Cache) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Writes		1.3.6.1.4.1.789.1.3.1.3.1.1.17
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_WRITE (Write to File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Creates		1.3.6.1.4.1.789.1.3.1.3.1.1.18
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_CREATE (Create File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Removes		1.3.6.1.4.1.789.1.3.1.3.1.1.19
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_REMOVE (Remove File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Renames		1.3.6.1.4.1.789.1.3.1.3.1.1.20
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_RENAME (Rename File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Links		1.3.6.1.4.1.789.1.3.1.3.1.1.21
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_LINK (Create Link to File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Symlinks		1.3.6.1.4.1.789.1.3.1.3.1.1.22
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Mkdirs		1.3.6.1.4.1.789.1.3.1.3.1.1.23
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_MKDIR (Create Directory) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Rmdirs		1.3.6.1.4.1.789.1.3.1.3.1.1.24
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_RMDIR (Remove Directory) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Readdirs		1.3.6.1.4.1.789.1.3.1.3.1.1.25
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_READDIR (Read From Directory) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Statfss		1.3.6.1.4.1.789.1.3.1.3.1.1.26
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Nulls		1.3.6.1.4.1.789.1.3.1.3.1.1.27
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_NULL (Do Nothing) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Getattrs		1.3.6.1.4.1.789.1.3.1.3.1.1.28
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_GETATTR (Get File Attributes) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Setattrs		1.3.6.1.4.1.789.1.3.1.3.1.1.29
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_SETATTR (Set File Attributes) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Lookups		1.3.6.1.4.1.789.1.3.1.3.1.1.30
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_LOOKUP (Lookup Filename) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Accesss		1.3.6.1.4.1.789.1.3.1.3.1.1.31
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_ACCESS (Check Access Permission) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Readlinks		1.3.6.1.4.1.789.1.3.1.3.1.1.32
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Reads		1.3.6.1.4.1.789.1.3.1.3.1.1.33
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READ (Read From File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Writes		1.3.6.1.4.1.789.1.3.1.3.1.1.34
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_WRITE (Write to File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Creates		1.3.6.1.4.1.789.1.3.1.3.1.1.35
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_CREATE (Create a File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Mkdirs		1.3.6.1.4.1.789.1.3.1.3.1.1.36
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_MKDIR (Create a Directory) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Symlinks		1.3.6.1.4.1.789.1.3.1.3.1.1.37
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Mknods		1.3.6.1.4.1.789.1.3.1.3.1.1.38
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_MKNOD (Create a Special Device) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Removes		1.3.6.1.4.1.789.1.3.1.3.1.1.39
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_REMOVE (Remove a File) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Rmdirs		1.3.6.1.4.1.789.1.3.1.3.1.1.40
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_RMDIR (Remove a Directory) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Renames		1.3.6.1.4.1.789.1.3.1.3.1.1.41
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_RENAME (Rename a File or Directory) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Links		1.3.6.1.4.1.789.1.3.1.3.1.1.42
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_LINK (Create Link to an Object) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Readdirs		1.3.6.1.4.1.789.1.3.1.3.1.1.43
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READDIR (Read From Directory) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3ReaddirPluss		1.3.6.1.4.1.789.1.3.1.3.1.1.44
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Fsstats		1.3.6.1.4.1.789.1.3.1.3.1.1.45
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Fsinfos		1.3.6.1.4.1.789.1.3.1.3.1.1.46
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_FSINFO (Get Static File System Information) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Pathconfs		1.3.6.1.4.1.789.1.3.1.3.1.1.47
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Commits		1.3.6.1.4.1.789.1.3.1.3.1.1.48
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.49
The number of the total NFS calls for the referenced client as a percentage of the total NFS calls received from all clients, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2NullPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.50
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_NULL (Do Nothing) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2GetattrPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.51
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_GETATTR (Get File Attributes) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2SetattrPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.52
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_SETATTR (Set File Attributes) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2RootPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.53
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_ROOT (Get Filesystem Root) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2LookupPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.54
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_LOOKUP (Look Up File Name) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2ReadlinkPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.55
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_READLINK (Read From Symbolic Link) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2ReadPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.56
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_READ (Read From File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2WrcachePerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.57
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_WRITECACHE (Write to Cache) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2WritePerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.58
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_WRITE (Write to File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2CreatePerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.59
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_CREATE (Create File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2RemovePerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.60
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_REMOVE (Remove File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2RenamePerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.61
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_RENAME (Rename File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2LinkPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.62
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_LINK (Create Link to File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2SymlinkPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.63
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2MkdirPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.64
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_MKDIR (Create Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2RmdirPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.65
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_RMDIR (Remove Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2ReaddirPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.66
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_READDIR (Read From Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2StatfsPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.67
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3NullPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.68
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_NULL (Do Nothing) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3GetattrPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.69
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_GETATTR (Get File Attributes) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3SetattrPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.70
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_SETATTR (Set File Attributes) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3LookupPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.71
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_LOOKUP (Lookup Filename) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3AccessPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.72
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_ACCESS (Check Access Permission) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3ReadlinkPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.73
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3ReadPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.74
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READ (Read From File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3WritePerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.75
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_WRITE (Write to File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3CreatePerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.76
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_CREATE (Create a File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3MkdirPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.77
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_MKDIR (Create a Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3SymlinkPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.78
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3MknodPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.79
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_MKNOD (Create a Special Device) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3RemovePerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.80
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_REMOVE (Remove a File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3RmdirPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.81
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_RMDIR (Remove a Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3RenamePerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.82
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_RENAME (Rename a File or Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3LinkPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.83
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_LINK (Create Link to an Object) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3ReaddirPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.84
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READDIR (Read From Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3ReaddirPlusPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.85
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3FsstatPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.86
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3FsinfoPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.87
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_FSINFO (Get Static File System Information) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3PathconfPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.88
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV3CommitPerCent		1.3.6.1.4.1.789.1.3.1.3.1.1.89
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

pclNfsV2Read512Calls		1.3.6.1.4.1.789.1.3.1.3.1.1.90
The number of NFS Version 2 read calls with request sizes between 0-511 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Read1KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.91
The number of NFS Version 2 read calls with request sizes between 512-1023 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Read2KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.92
The number of NFS Version 2 read calls with request sizes between 1K-2047 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Read4KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.93
The number of NFS Version 2 read calls with request sizes between 2K-4095 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Read8KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.94
The number of NFS Version 2 read calls with request sizes between 4K-8191 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Read16KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.95
The number of NFS Version 2 read calls with request sizes between 8K-16383 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Read32KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.96
The number of NFS Version 2 read calls with request sizes between 16K-32767 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Read64KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.97
The number of NFS Version 2 read calls with request sizes between 32K-65535 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Read128KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.98
The number of NFS Version 2 read calls with request sizes between 64K-131071 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Write512Calls		1.3.6.1.4.1.789.1.3.1.3.1.1.99
The number of NFS Version 2 write calls with request sizes between 0-511 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Write1KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.100
The number of NFS Version 2 write calls with request sizes between 512-1023 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Write2KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.101
The number of NFS Version 2 write calls with request sizes between 1K-2047 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Write4KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.102
The number of NFS Version 2 write calls with request sizes between 2K-4095 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Write8KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.103
The number of NFS Version 2 write calls with request sizes between 4K-8191 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Write16KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.104
The number of NFS Version 2 write calls with request sizes between 8K-16383 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Write32KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.105
The number of NFS Version 2 write calls with request sizes between 16K-32767 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Write64KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.106
The number of NFS Version 2 write calls with request sizes between 32K-65535 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV2Write128KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.107
The number of NFS Version 2 write calls with request sizes between 64K-131071 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Read512Calls		1.3.6.1.4.1.789.1.3.1.3.1.1.108
The number of NFS Version 3 read calls with request sizes between 0-511 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Read1KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.109
The number of NFS Version 3 read calls with request sizes between 512-1023 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Read2KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.110
The number of NFS Version 3 read calls with request sizes between 1K-2047 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Read4KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.111
The number of NFS Version 3 read calls with request sizes between 2K-4095 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Read8KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.112
The number of NFS Version 3 read calls with request sizes between 4K-8191 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Read16KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.113
The number of NFS Version 3 read calls with request sizes between 8K-16383 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Read32KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.114
The number of NFS Version 3 read calls with request sizes between 16K-32767 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Read64KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.115
The number of NFS Version 3 read calls with request sizes between 32K-65535 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Read128KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.116
The number of NFS Version 3 read calls with request sizes between 64K-131071 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Write512Calls		1.3.6.1.4.1.789.1.3.1.3.1.1.117
The number of NFS Version 3 write calls with request sizes between 0-511 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Write1KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.118
The number of NFS Version 3 write calls with request sizes between 512-1023 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Write2KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.119
The number of NFS Version 3 write calls with request sizes between 1K-2047 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Write4KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.120
The number of NFS Version 3 write calls with request sizes between 2K-4095 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Write8KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.121
The number of NFS Version 3 write calls with request sizes between 4K-8191 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Write16KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.122
The number of NFS Version 3 write calls with request sizes between 8K-16383 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Write32KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.123
The number of NFS Version 3 write calls with request sizes between 16K-32767 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Write64KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.124
The number of NFS Version 3 write calls with request sizes between 32K-65535 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNfsV3Write128KCalls		1.3.6.1.4.1.789.1.3.1.3.1.1.125
The number of NFS Version 3 write calls with request sizes between 64K-131071 bytes received from this client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

pclNumber		1.3.6.1.4.1.789.1.3.1.3.2
Number of entries in the pclTable table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

trpcServ		1.3.6.1.4.1.789.1.3.2.1
OBJECT IDENTIFIER

tnfsServ		1.3.6.1.4.1.789.1.3.2.2
OBJECT IDENTIFIER

trpcCalls		1.3.6.1.4.1.789.1.3.2.1.1
The total number of RPC calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

trpcBadCalls		1.3.6.1.4.1.789.1.3.2.1.2
The total number of calls rejected by the RPC layer, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

trpcNullRecvs		1.3.6.1.4.1.789.1.3.2.1.3
The number of times an RPC call was not available when it was thought to be received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

trpcBadLens		1.3.6.1.4.1.789.1.3.2.1.4
The number of RPC calls received with a length shorter than a minimum-sized RPC call, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

trpcServXDRCalls		1.3.6.1.4.1.789.1.3.2.1.5
The number of RPC calls received whose header could not be XDR decoded, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tnfsCalls		1.3.6.1.4.1.789.1.3.2.2.1
The total number of NFS calls received, since last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tnfsServBadCalls		1.3.6.1.4.1.789.1.3.2.2.2
The total number of received NFS calls rejected, since last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tnfsV2		1.3.6.1.4.1.789.1.3.2.2.3
OBJECT IDENTIFIER

tnfsV3		1.3.6.1.4.1.789.1.3.2.2.4
OBJECT IDENTIFIER

treplyCache		1.3.6.1.4.1.789.1.3.2.2.5
OBJECT IDENTIFIER

tnfsrwStats		1.3.6.1.4.1.789.1.3.2.2.6
OBJECT IDENTIFIER

tv2Calls		1.3.6.1.4.1.789.1.3.2.2.3.1
OBJECT IDENTIFIER

tv2Percent		1.3.6.1.4.1.789.1.3.2.2.3.2
OBJECT IDENTIFIER

tv2CachedCalls		1.3.6.1.4.1.789.1.3.2.2.3.3
OBJECT IDENTIFIER

tv2CachedPerCent		1.3.6.1.4.1.789.1.3.2.2.3.4
OBJECT IDENTIFIER

tv2cNulls		1.3.6.1.4.1.789.1.3.2.2.3.1.1
The number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cGetattrs		1.3.6.1.4.1.789.1.3.2.2.3.1.2
The number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cSetattrs		1.3.6.1.4.1.789.1.3.2.2.3.1.3
The number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, since the the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cRoots		1.3.6.1.4.1.789.1.3.2.2.3.1.4
The number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cLookups		1.3.6.1.4.1.789.1.3.2.2.3.1.5
The number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cReadlinks		1.3.6.1.4.1.789.1.3.2.2.3.1.6
The number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cReads		1.3.6.1.4.1.789.1.3.2.2.3.1.7
The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cWrcaches		1.3.6.1.4.1.789.1.3.2.2.3.1.8
The number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cWrites		1.3.6.1.4.1.789.1.3.2.2.3.1.9
The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cCreates		1.3.6.1.4.1.789.1.3.2.2.3.1.10
The number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cRemoves		1.3.6.1.4.1.789.1.3.2.2.3.1.11
The number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cRenames		1.3.6.1.4.1.789.1.3.2.2.3.1.12
The number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cLinks		1.3.6.1.4.1.789.1.3.2.2.3.1.13
The number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cSymlinks		1.3.6.1.4.1.789.1.3.2.2.3.1.14
The number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cMkdirs		1.3.6.1.4.1.789.1.3.2.2.3.1.15
The number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cRmdirs		1.3.6.1.4.1.789.1.3.2.2.3.1.16
The number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cReaddirs		1.3.6.1.4.1.789.1.3.2.2.3.1.17
The number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cStatfss		1.3.6.1.4.1.789.1.3.2.2.3.1.18
The number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2pNulls		1.3.6.1.4.1.789.1.3.2.2.3.2.1
The number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pGetattrs		1.3.6.1.4.1.789.1.3.2.2.3.2.2
The number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pSetattrs		1.3.6.1.4.1.789.1.3.2.2.3.2.3
The number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pRoots		1.3.6.1.4.1.789.1.3.2.2.3.2.4
The number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pLookups		1.3.6.1.4.1.789.1.3.2.2.3.2.5
The number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pReadlinks		1.3.6.1.4.1.789.1.3.2.2.3.2.6
The number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pReads		1.3.6.1.4.1.789.1.3.2.2.3.2.7
The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pWrcaches		1.3.6.1.4.1.789.1.3.2.2.3.2.8
The number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pWrites		1.3.6.1.4.1.789.1.3.2.2.3.2.9
The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pCreates		1.3.6.1.4.1.789.1.3.2.2.3.2.10
The number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pRemoves		1.3.6.1.4.1.789.1.3.2.2.3.2.11
The number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pRenames		1.3.6.1.4.1.789.1.3.2.2.3.2.12
The number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pLinks		1.3.6.1.4.1.789.1.3.2.2.3.2.13
The number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pSymlinks		1.3.6.1.4.1.789.1.3.2.2.3.2.14
The number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pMkdirs		1.3.6.1.4.1.789.1.3.2.2.3.2.15
The number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pRmdirs		1.3.6.1.4.1.789.1.3.2.2.3.2.16
The number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pReaddirs		1.3.6.1.4.1.789.1.3.2.2.3.2.17
The number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2pStatfss		1.3.6.1.4.1.789.1.3.2.2.3.2.18
The number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure as a percentage of total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2ccNulls		1.3.6.1.4.1.789.1.3.2.2.3.3.1
The number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccGetattrs		1.3.6.1.4.1.789.1.3.2.2.3.3.2
The number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccSetattrs		1.3.6.1.4.1.789.1.3.2.2.3.3.3
The number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccRoots		1.3.6.1.4.1.789.1.3.2.2.3.3.4
The number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccLookups		1.3.6.1.4.1.789.1.3.2.2.3.3.5
The number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccReadlinks		1.3.6.1.4.1.789.1.3.2.2.3.3.6
The number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccReads		1.3.6.1.4.1.789.1.3.2.2.3.3.7
The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccWrcaches		1.3.6.1.4.1.789.1.3.2.2.3.3.8
The number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccWrites		1.3.6.1.4.1.789.1.3.2.2.3.3.9
The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccCreates		1.3.6.1.4.1.789.1.3.2.2.3.3.10
The number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccRemoves		1.3.6.1.4.1.789.1.3.2.2.3.3.11
The number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccRenames		1.3.6.1.4.1.789.1.3.2.2.3.3.12
The number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccLinks		1.3.6.1.4.1.789.1.3.2.2.3.3.13
The number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccSymlinks		1.3.6.1.4.1.789.1.3.2.2.3.3.14
The number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccMkdirs		1.3.6.1.4.1.789.1.3.2.2.3.3.15
The number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccRmdirs		1.3.6.1.4.1.789.1.3.2.2.3.3.16
The number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccReaddirs		1.3.6.1.4.1.789.1.3.2.2.3.3.17
The number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ccStatfss		1.3.6.1.4.1.789.1.3.2.2.3.3.18
The number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2cpNulls		1.3.6.1.4.1.789.1.3.2.2.3.4.1
The number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpGetattrs		1.3.6.1.4.1.789.1.3.2.2.3.4.2
The number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpSetattrs		1.3.6.1.4.1.789.1.3.2.2.3.4.3
The number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpRoots		1.3.6.1.4.1.789.1.3.2.2.3.4.4
The number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpLookups		1.3.6.1.4.1.789.1.3.2.2.3.4.5
The number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpReadlinks		1.3.6.1.4.1.789.1.3.2.2.3.4.6
The number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpReads		1.3.6.1.4.1.789.1.3.2.2.3.4.7
The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpWrcaches		1.3.6.1.4.1.789.1.3.2.2.3.4.8
The number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpWrites		1.3.6.1.4.1.789.1.3.2.2.3.4.9
The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpCreates		1.3.6.1.4.1.789.1.3.2.2.3.4.10
The number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpRemoves		1.3.6.1.4.1.789.1.3.2.2.3.4.11
The number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpRenames		1.3.6.1.4.1.789.1.3.2.2.3.4.12
The number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpLinks		1.3.6.1.4.1.789.1.3.2.2.3.4.13
The number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpSymlinks		1.3.6.1.4.1.789.1.3.2.2.3.4.14
The number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpMkdirs		1.3.6.1.4.1.789.1.3.2.2.3.4.15
The number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpRmdirs		1.3.6.1.4.1.789.1.3.2.2.3.4.16
The number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpReaddirs		1.3.6.1.4.1.789.1.3.2.2.3.4.17
The number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv2cpStatfss		1.3.6.1.4.1.789.1.3.2.2.3.4.18
The number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3Calls		1.3.6.1.4.1.789.1.3.2.2.4.1
OBJECT IDENTIFIER

tv3Percent		1.3.6.1.4.1.789.1.3.2.2.4.2
OBJECT IDENTIFIER

tv3CachedCalls		1.3.6.1.4.1.789.1.3.2.2.4.3
OBJECT IDENTIFIER

tv3CachedPerCent		1.3.6.1.4.1.789.1.3.2.2.4.4
OBJECT IDENTIFIER

tv3cNulls		1.3.6.1.4.1.789.1.3.2.2.4.1.1
The number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cGetattrs		1.3.6.1.4.1.789.1.3.2.2.4.1.2
The number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cSetattrs		1.3.6.1.4.1.789.1.3.2.2.4.1.3
The number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cLookups		1.3.6.1.4.1.789.1.3.2.2.4.1.4
The number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cAccesss		1.3.6.1.4.1.789.1.3.2.2.4.1.5
The number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cReadlinks		1.3.6.1.4.1.789.1.3.2.2.4.1.6
The number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cReads		1.3.6.1.4.1.789.1.3.2.2.4.1.7
The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cWrites		1.3.6.1.4.1.789.1.3.2.2.4.1.8
The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cCreates		1.3.6.1.4.1.789.1.3.2.2.4.1.9
The number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cMkdirs		1.3.6.1.4.1.789.1.3.2.2.4.1.10
The number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cSymlinks		1.3.6.1.4.1.789.1.3.2.2.4.1.11
The number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cMknods		1.3.6.1.4.1.789.1.3.2.2.4.1.12
The number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cRemoves		1.3.6.1.4.1.789.1.3.2.2.4.1.13
The number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cRmdirs		1.3.6.1.4.1.789.1.3.2.2.4.1.14
The number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cRenames		1.3.6.1.4.1.789.1.3.2.2.4.1.15
The number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cLinks		1.3.6.1.4.1.789.1.3.2.2.4.1.16
The number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cReaddirs		1.3.6.1.4.1.789.1.3.2.2.4.1.17
The number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cReaddirPluss		1.3.6.1.4.1.789.1.3.2.2.4.1.18
The number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cFsstats		1.3.6.1.4.1.789.1.3.2.2.4.1.19
The number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cFsinfos		1.3.6.1.4.1.789.1.3.2.2.4.1.20
The number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cPathconfs		1.3.6.1.4.1.789.1.3.2.2.4.1.21
The number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cCommits		1.3.6.1.4.1.789.1.3.2.2.4.1.22
The number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3pNulls		1.3.6.1.4.1.789.1.3.2.2.4.2.1
The number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pGetattrs		1.3.6.1.4.1.789.1.3.2.2.4.2.2
The number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pSetattrs		1.3.6.1.4.1.789.1.3.2.2.4.2.3
The number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pLookups		1.3.6.1.4.1.789.1.3.2.2.4.2.4
The number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pAccesss		1.3.6.1.4.1.789.1.3.2.2.4.2.5
The number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pReadlinks		1.3.6.1.4.1.789.1.3.2.2.4.2.6
The number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pReads		1.3.6.1.4.1.789.1.3.2.2.4.2.7
The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pWrites		1.3.6.1.4.1.789.1.3.2.2.4.2.8
The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pCreates		1.3.6.1.4.1.789.1.3.2.2.4.2.9
The number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pMkdirs		1.3.6.1.4.1.789.1.3.2.2.4.2.10
The number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pSymlinks		1.3.6.1.4.1.789.1.3.2.2.4.2.11
The number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pMknods		1.3.6.1.4.1.789.1.3.2.2.4.2.12
The number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pRemoves		1.3.6.1.4.1.789.1.3.2.2.4.2.13
The number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pRmdirs		1.3.6.1.4.1.789.1.3.2.2.4.2.14
The number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pRenames		1.3.6.1.4.1.789.1.3.2.2.4.2.15
The number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pLinks		1.3.6.1.4.1.789.1.3.2.2.4.2.16
The number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pReaddirs		1.3.6.1.4.1.789.1.3.2.2.4.2.17
The number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pReaddirPluss		1.3.6.1.4.1.789.1.3.2.2.4.2.18
The number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pFsstats		1.3.6.1.4.1.789.1.3.2.2.4.2.19
The number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pFsinfos		1.3.6.1.4.1.789.1.3.2.2.4.2.20
The number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pPathconfs		1.3.6.1.4.1.789.1.3.2.2.4.2.21
The number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3pCommits		1.3.6.1.4.1.789.1.3.2.2.4.2.22
The number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, as a percentage of the total NFS calls received, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3ccNulls		1.3.6.1.4.1.789.1.3.2.2.4.3.1
The number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccGetattrs		1.3.6.1.4.1.789.1.3.2.2.4.3.2
The number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccSetattrs		1.3.6.1.4.1.789.1.3.2.2.4.3.3
The number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccLookups		1.3.6.1.4.1.789.1.3.2.2.4.3.4
The number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccAccesss		1.3.6.1.4.1.789.1.3.2.2.4.3.5
The number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccReadlinks		1.3.6.1.4.1.789.1.3.2.2.4.3.6
The number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccReads		1.3.6.1.4.1.789.1.3.2.2.4.3.7
The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccWrites		1.3.6.1.4.1.789.1.3.2.2.4.3.8
The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccCreates		1.3.6.1.4.1.789.1.3.2.2.4.3.9
The number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccMkdirs		1.3.6.1.4.1.789.1.3.2.2.4.3.10
The number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccSymlinks		1.3.6.1.4.1.789.1.3.2.2.4.3.11
The number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccMknods		1.3.6.1.4.1.789.1.3.2.2.4.3.12
The number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccRemoves		1.3.6.1.4.1.789.1.3.2.2.4.3.13
The number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccRmdirs		1.3.6.1.4.1.789.1.3.2.2.4.3.14
The number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccRenames		1.3.6.1.4.1.789.1.3.2.2.4.3.15
The number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccLinks		1.3.6.1.4.1.789.1.3.2.2.4.3.16
The number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccReaddirs		1.3.6.1.4.1.789.1.3.2.2.4.3.17
The number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccReaddirPluss		1.3.6.1.4.1.789.1.3.2.2.4.3.18
The number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccFsstats		1.3.6.1.4.1.789.1.3.2.2.4.3.19
The number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccFsinfos		1.3.6.1.4.1.789.1.3.2.2.4.3.20
The number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccPathconfs		1.3.6.1.4.1.789.1.3.2.2.4.3.21
The number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3ccCommits		1.3.6.1.4.1.789.1.3.2.2.4.3.22
The number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3cpNulls		1.3.6.1.4.1.789.1.3.2.2.4.4.1
The number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpGetattrs		1.3.6.1.4.1.789.1.3.2.2.4.4.2
The number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpSetattrs		1.3.6.1.4.1.789.1.3.2.2.4.4.3
The number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpLookups		1.3.6.1.4.1.789.1.3.2.2.4.4.4
The number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpAccesss		1.3.6.1.4.1.789.1.3.2.2.4.4.5
The number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpReadlinks		1.3.6.1.4.1.789.1.3.2.2.4.4.6
The number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpReads		1.3.6.1.4.1.789.1.3.2.2.4.4.7
The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpWrites		1.3.6.1.4.1.789.1.3.2.2.4.4.8
The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpCreates		1.3.6.1.4.1.789.1.3.2.2.4.4.9
The number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpMkdirs		1.3.6.1.4.1.789.1.3.2.2.4.4.10
The number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpSymlinks		1.3.6.1.4.1.789.1.3.2.2.4.4.11
The number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpMknods		1.3.6.1.4.1.789.1.3.2.2.4.4.12
The number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpRemoves		1.3.6.1.4.1.789.1.3.2.2.4.4.13
The number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpRmdirs		1.3.6.1.4.1.789.1.3.2.2.4.4.14
The number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpRenames		1.3.6.1.4.1.789.1.3.2.2.4.4.15
The number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpLinks		1.3.6.1.4.1.789.1.3.2.2.4.4.16
The number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpReaddirs		1.3.6.1.4.1.789.1.3.2.2.4.4.17
The number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpReaddirPluss		1.3.6.1.4.1.789.1.3.2.2.4.4.18
The number of NFS Version 3 calls received for the NFSPROC3_READIRPLUS (Extended Read from Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpFsstats		1.3.6.1.4.1.789.1.3.2.2.4.4.19
The number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpFsinfos		1.3.6.1.4.1.789.1.3.2.2.4.4.20
The number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpPathconfs		1.3.6.1.4.1.789.1.3.2.2.4.4.21
The number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tv3cpCommits		1.3.6.1.4.1.789.1.3.2.2.4.4.22
The number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

trcInProgressHits		1.3.6.1.4.1.789.1.3.2.2.5.1
The number of NFS requests that were dropped, for calls already in progress, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

trcDelayHits		1.3.6.1.4.1.789.1.3.2.2.5.2
The number of NFS requests that were dropped, for replies already generated within a short interval, since the last boot. These stats are deprecated. A value of zero will always be returned for these stats.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

trcMisses		1.3.6.1.4.1.789.1.3.2.2.5.3
The number of NFS requests received for which there were no corresponding entries already in the Reply Cache, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

trcNonIdemDoneHits		1.3.6.1.4.1.789.1.3.2.2.5.4
The number of NFS requests received that resulted in replies being replayed from the Reply Cache, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

trcNonIdemNotDoneHits		1.3.6.1.4.1.789.1.3.2.2.5.5
The number of NFS requests received for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

trcTcpInProgressHits		1.3.6.1.4.1.789.1.3.2.2.5.6
The number of NFS requests that were dropped for the TCP protocol, for calls already in progress, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

trcTcpDelayHits		1.3.6.1.4.1.789.1.3.2.2.5.7
The number of NFS requests that were dropped for the TCP protocol, for replies already generated within a short interval, since the last boot. These stats are deprecated. A value of zero will always be returned for these stats.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

trcTcpMisses		1.3.6.1.4.1.789.1.3.2.2.5.8
The number of NFS requests received for the TCP protocol for which there were no corresponding entries already in the Reply Cache, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

trcTcpNonIdemDoneHits		1.3.6.1.4.1.789.1.3.2.2.5.9
The number of NFS requests received for the TCP protocol that resulted in replies being replayed from the Reply Cache, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

trcTcpNonIdemNotDoneHits		1.3.6.1.4.1.789.1.3.2.2.5.10
The number of NFS requests received for the TCP protocol for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

trcUdpInProgressHits		1.3.6.1.4.1.789.1.3.2.2.5.11
The number of NFS requests that were dropped for the UDP protocol, for calls already in progress, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

trcUdpDelayHits		1.3.6.1.4.1.789.1.3.2.2.5.12
The number of NFS requests that were dropped for the UDP protocol, for replies already generated within a short interval, since the last boot. These stats are deprecated. A value of zero will always be returned for these stats.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

trcUdpMisses		1.3.6.1.4.1.789.1.3.2.2.5.13
The number of NFS requests received for the UDP protocol for which there were no corresponding entries already in the Reply Cache, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

trcUdpNonIdemDoneHits		1.3.6.1.4.1.789.1.3.2.2.5.14
The number of NFS requests received for the UDP protocol that resulted in replies being replayed from the Reply Cache, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

trcUdpNonIdemNotDoneHits		1.3.6.1.4.1.789.1.3.2.2.5.15
The number of NFS requests received for the UDP protocol for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last boot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2ReadStats		1.3.6.1.4.1.789.1.3.2.2.6.1
OBJECT IDENTIFIER

tv2WriteStats		1.3.6.1.4.1.789.1.3.2.2.6.2
OBJECT IDENTIFIER

tv3ReadStats		1.3.6.1.4.1.789.1.3.2.2.6.3
OBJECT IDENTIFIER

tv3WriteStats		1.3.6.1.4.1.789.1.3.2.2.6.4
OBJECT IDENTIFIER

tv2Read512Calls		1.3.6.1.4.1.789.1.3.2.2.6.1.1
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 0-511 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Read1KCalls		1.3.6.1.4.1.789.1.3.2.2.6.1.2
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 512-1023 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Read2KCalls		1.3.6.1.4.1.789.1.3.2.2.6.1.3
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 1K-2047 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Read4KCalls		1.3.6.1.4.1.789.1.3.2.2.6.1.4
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 2K-4095 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Read8KCalls		1.3.6.1.4.1.789.1.3.2.2.6.1.5
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 4K-8191 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Read16KCalls		1.3.6.1.4.1.789.1.3.2.2.6.1.6
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 8K-16383 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Read32KCalls		1.3.6.1.4.1.789.1.3.2.2.6.1.7
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 16K-32767 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Read64KCalls		1.3.6.1.4.1.789.1.3.2.2.6.1.8
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 32K-65535 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Read128KCalls		1.3.6.1.4.1.789.1.3.2.2.6.1.9
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 64K-131071 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Write512Calls		1.3.6.1.4.1.789.1.3.2.2.6.2.1
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 0-511 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Write1KCalls		1.3.6.1.4.1.789.1.3.2.2.6.2.2
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 512-1023 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Write2KCalls		1.3.6.1.4.1.789.1.3.2.2.6.2.3
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 1K-2047 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Write4KCalls		1.3.6.1.4.1.789.1.3.2.2.6.2.4
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 2K-4095 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Write8KCalls		1.3.6.1.4.1.789.1.3.2.2.6.2.5
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 4K-8191 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Write16KCalls		1.3.6.1.4.1.789.1.3.2.2.6.2.6
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 8K-16383 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Write32KCalls		1.3.6.1.4.1.789.1.3.2.2.6.2.7
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 16K-32767 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Write64KCalls		1.3.6.1.4.1.789.1.3.2.2.6.2.8
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 32K-65535 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv2Write128KCalls		1.3.6.1.4.1.789.1.3.2.2.6.2.9
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 64K-131071 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Read512Calls		1.3.6.1.4.1.789.1.3.2.2.6.3.1
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 0-511 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Read1KCalls		1.3.6.1.4.1.789.1.3.2.2.6.3.2
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 512-1023 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Read2KCalls		1.3.6.1.4.1.789.1.3.2.2.6.3.3
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 1K-2047 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Read4KCalls		1.3.6.1.4.1.789.1.3.2.2.6.3.4
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 2K-4095 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Read8KCalls		1.3.6.1.4.1.789.1.3.2.2.6.3.5
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 4K-8191 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Read16KCalls		1.3.6.1.4.1.789.1.3.2.2.6.3.6
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 8K-16383 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Read32KCalls		1.3.6.1.4.1.789.1.3.2.2.6.3.7
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 16K-32767 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Read64KCalls		1.3.6.1.4.1.789.1.3.2.2.6.3.8
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 32K-65535 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Read128KCalls		1.3.6.1.4.1.789.1.3.2.2.6.3.9
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 64K-131071 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Write512Calls		1.3.6.1.4.1.789.1.3.2.2.6.4.1
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 0-511 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Write1KCalls		1.3.6.1.4.1.789.1.3.2.2.6.4.2
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 512-1023 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Write2KCalls		1.3.6.1.4.1.789.1.3.2.2.6.4.3
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 1K-2047 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Write4KCalls		1.3.6.1.4.1.789.1.3.2.2.6.4.4
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 2K-4095 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Write8KCalls		1.3.6.1.4.1.789.1.3.2.2.6.4.5
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 4K-8191 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Write16KCalls		1.3.6.1.4.1.789.1.3.2.2.6.4.6
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 8K-16383 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Write32KCalls		1.3.6.1.4.1.789.1.3.2.2.6.4.7
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 16K-32767 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Write64KCalls		1.3.6.1.4.1.789.1.3.2.2.6.4.8
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 32K-65535 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tv3Write128KCalls		1.3.6.1.4.1.789.1.3.2.2.6.4.9
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 64K-131071 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsIsLicensed		1.3.6.1.4.1.789.1.3.3.1
Whether the nfs protocol is licensed on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

quotaState		1.3.6.1.4.1.789.1.4.1
Indicates whether the root volume's quotas are ON, OFF or initializing. This object is deprecated - use qvStateTable.qvStateStat instead.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	quotaStateOff(1), quotaStateOn(2), quotaStateInit(3)

quotaInitPercent		1.3.6.1.4.1.789.1.4.2
Indicates percentage of root volume quota computation done while quotas are in initializing state. This object is deprecated - use qvStateTable.qvInitPercent instead.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

qrTable		1.3.6.1.4.1.789.1.4.3
Provide a report of the current file and space consumption for each user or group with a quota in /etc/quotas. All quotas are displayed regardless of volume, and no volume information is given. This table is deprecated - use qrVTable instead.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		QrEntry

qrEntry		1.3.6.1.4.1.789.1.4.3.1
Provide a report of the current file and space consumption for a referenced entry with a quota in the file /etc/quotas. All quotas are displayed regardless of volume, and no volume information is given. This object is deprecated - use qrVEntry instead.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	QrEntry

qrIndex		1.3.6.1.4.1.789.1.4.3.1.1
A number that identifies this entry in the file /etc/quotas.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

qrType		1.3.6.1.4.1.789.1.4.3.1.2
Identifies the kind of quota for this qrEntry.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	qrTypeUser(1), qrTypeGroup(2), qrTypeTree(3), qrTypeUnknown(4)

qrId		1.3.6.1.4.1.789.1.4.3.1.3
The UID (user's numerical ID) or the GID (numerical ID of the group that a user belongs to), as applicable, associated with this qrEntry.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

qrKBytesUsed		1.3.6.1.4.1.789.1.4.3.1.4
The current number of KBytes used for this qrEntry.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

qrKBytesLimit		1.3.6.1.4.1.789.1.4.3.1.5
The limit of KBytes that can be used for this qrEntry.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

qrFilesUsed		1.3.6.1.4.1.789.1.4.3.1.6
The current number of files used for this qrEntry.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

qrFileLimit		1.3.6.1.4.1.789.1.4.3.1.7
The limit of files that can be used for this qrEntry.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

qrPathName		1.3.6.1.4.1.789.1.4.3.1.8
A textual string that contains the path corresponding to this qrEntry.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString

qvStateTable		1.3.6.1.4.1.789.1.4.4
Provide a report of the current quota state of each volume in the system.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		QvStateEntry

qvStateEntry		1.3.6.1.4.1.789.1.4.4.1
Provide a report of the current quota state of each volume in the system.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	QvStateEntry

qvStateVolume		1.3.6.1.4.1.789.1.4.4.1.1
A number that identifies this volume. The mapping of this number to actual volumes may change if volumes are added or deleted. Use qvStateName to unambiguously identify a volume. The mapping established by this object is the same as the mapping of qrVVolume (below) to actual volumes. For instance, if a qvStateVolume value of '5' represents the volume 'vol2', a value of '5' in qrVVolume also represents the volume 'vol2'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

qvStateName		1.3.6.1.4.1.789.1.4.4.1.2
Indicates the name of this volume.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

qvStateStat		1.3.6.1.4.1.789.1.4.4.1.3
Indicates whether quotas are ON, OFF or initializing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	quotaStateOff(1), quotaStateOn(2), quotaStateInit(3)

qvStateInitPercent		1.3.6.1.4.1.789.1.4.4.1.4
Indicates percentage of quota computation done while quotas are in initializing state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

qrVTable		1.3.6.1.4.1.789.1.4.5
Provide a report of the current file and space consumption for each user or group with a quota in /etc/quotas.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		QrVEntry

qrVEntry		1.3.6.1.4.1.789.1.4.5.1
Provide a report of the current file and space consumption for a referenced entry with a quota in the file /etc/quotas. Indices select the volume of the quota and the quota entry itself.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	QrVEntry

qrVIndex		1.3.6.1.4.1.789.1.4.5.1.1
A number that identifies this entry in the file /etc/quotas in the given volume.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

qrVType		1.3.6.1.4.1.789.1.4.5.1.2
Identifies the kind of quota for this qrVEntry.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	qrVTypeUser(1), qrVTypeGroup(2), qrVTypeTree(3), qrVTypeUserDefault(4), qrVTypeGroupDefault(5), qrVTypeUnknown(6)

qrVId		1.3.6.1.4.1.789.1.4.5.1.3
The UID (user's numerical ID) or the GID (numerical ID of the group that a user belongs to), as applicable, associated with this qrVEntry. Check the qrVIdType field to see if this field is valid.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

qrVKBytesUsed		1.3.6.1.4.1.789.1.4.5.1.4
The current number of KBytes used for this qrVEntry.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

qrVKBytesLimit		1.3.6.1.4.1.789.1.4.5.1.5
The limit of KBytes that can be used for this qrVEntry.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

qrVFilesUsed		1.3.6.1.4.1.789.1.4.5.1.6
The current number of files used for this qrVEntry.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

qrVFileLimit		1.3.6.1.4.1.789.1.4.5.1.7
The limit of files that can be used for this qrVEntry.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

qrVPathName		1.3.6.1.4.1.789.1.4.5.1.8
A textual string that contains the path corresponding to this qrVEntry.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString

qrVVolume		1.3.6.1.4.1.789.1.4.5.1.9
A number that identifies the volume for which this quota is in effect on. The volume that this value represents can be determined by checking the value of qvStateName (above) with qvStateVolume set to the value found here.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

qrVTree		1.3.6.1.4.1.789.1.4.5.1.10
A string that indicates which qtree this quota belongs to.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString

qrVIdType		1.3.6.1.4.1.789.1.4.5.1.11
A value that indicates which ID field is valid.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	qrVIdValid(1), qrVSidValid(2)

qrVSid		1.3.6.1.4.1.789.1.4.5.1.12
The one or more IDs associated with this qrVEntry. If the qrVentry is associated with a Windows ID, the text form of the Windows ID (the SID) is here. If the qrVEntry is associated with more than one id, this contains a blank separated list of those IDs. Check the qrVIdType field to see if this field is valid.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString

qrVKBytesThreshold		1.3.6.1.4.1.789.1.4.5.1.13
A number of KBytes that when used by this entry produces a warning message.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

qrVKBytesLimitSoft		1.3.6.1.4.1.789.1.4.5.1.14
The limit of KBytes that can be used for this qrVEntry before a warning message and SNMP trap is produced.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

qrVFileLimitSoft		1.3.6.1.4.1.789.1.4.5.1.15
The limit of files that can be used for this qrVEntry before a warning message and SNMP trap is produced.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

qrV2Table		1.3.6.1.4.1.789.1.4.6
Provide a report of the current file and space consumption for each user or group with a quota in /etc/quotas.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		QrV2Entry

qrV2Entry		1.3.6.1.4.1.789.1.4.6.1
Provide a report of the current file and space consumption for a referenced entry with a quota in the file /etc/quotas. Indices select the volume of the quota and the quota entry itself.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	QrV2Entry

qrV2Index		1.3.6.1.4.1.789.1.4.6.1.1
A number that identifies this entry in the file /etc/quotas in the given volume.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

qrV2Type		1.3.6.1.4.1.789.1.4.6.1.2
Identifies the kind of quota for this qrV2Entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	qrV2TypeUser(1), qrV2TypeGroup(2), qrV2TypeTree(3), qrV2TypeUserDefault(4), qrV2TypeGroupDefault(5), qrV2TypeUnknown(6)

qrV2Id		1.3.6.1.4.1.789.1.4.6.1.3
The UID (user's numerical ID) or the GID (numerical ID of the group that a user belongs to), as applicable, associated with this qrV2Entry. Check the qrV2IdType field to see if this field is valid.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

qrV2HighKBytesUsed		1.3.6.1.4.1.789.1.4.6.1.4
The current number of KBytes used for this qrV2Entry. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

qrV2LowKBytesUsed		1.3.6.1.4.1.789.1.4.6.1.5
The current number of KBytes used for this qrV2Entry. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

qrV2QuotaUnlimited		1.3.6.1.4.1.789.1.4.6.1.6
This flag designates whether or not the size based quota limit for this qrV2Entry is unlimited. If false(1) then qrV2HighKBytesLimit and qrV2LowKBytesLimit are valid, if true(0) both qrV2HighKBytesLimit and qrV2LowKBytesLimit are unused and will return 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

qrV2HighKBytesLimit		1.3.6.1.4.1.789.1.4.6.1.7
The limit of KBytes that can be used for this qrV2Entry. This object returns the most significant 32 bits of the 64 bit unsigned integer. This will return 0 if qrV2QuotaUnlimited is true.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

qrV2LowKBytesLimit		1.3.6.1.4.1.789.1.4.6.1.8
The limit of KBytes that can be used for this qrV2Entry. This object returns the least significant 32 bits of the 64 bit unsigned integer. This will return 0 if qrV2QuotaUnlimited is true.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

qrV2FilesUsed		1.3.6.1.4.1.789.1.4.6.1.9
The current number of files used for this qrV2Entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

qrV2FileQuotaUnlimited		1.3.6.1.4.1.789.1.4.6.1.10
This flag designates whether or not the file based quota limit for this qrV2Entry is unlimited. If false(1) then qrV2FileLimit is valid, if true(0) qrV2FileLimit will return 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

qrV2FileLimit		1.3.6.1.4.1.789.1.4.6.1.11
The limit of files that can be used for this qrV2Entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

qrV2PathName		1.3.6.1.4.1.789.1.4.6.1.12
A textual string that contains the path corresponding to this qrV2Entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

qrV2Volume		1.3.6.1.4.1.789.1.4.6.1.13
A number that identifies the volume for which this quota is in effect on. The volume that this value represents can be determined by checking the value of qvStateName (above) with qvStateVolume set to the value found here.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

qrV2Tree		1.3.6.1.4.1.789.1.4.6.1.14
A string that indicates which qtree this quota belongs to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

qrV2IdType		1.3.6.1.4.1.789.1.4.6.1.15
A value that indicates which ID field is valid.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	qrV2IdValid(1), qrV2SidValid(2)

qrV2Sid		1.3.6.1.4.1.789.1.4.6.1.16
The one or more IDs associated with this qrV2Entry. If the qrV2entry is associated with a Windows ID, the text form of the Windows ID (the SID) is here. If the qrV2Entry is associated with more than one id, this contains a blank separated list of those IDs. Check the qrV2IdType field to see if this field is valid.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

qrV2ThresholdUnlimited		1.3.6.1.4.1.789.1.4.6.1.17
This flag designates whether or not the size based threshold limit for this qrV2Entry is unlimited. If false(1) then qrV2HighKBytesThreshold and qrV2LowKBytesThreshold are valid, if true(0) both qrV2HighKBytesThreshold and qrV2LowKBytesThreshold are unused and will return 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

qrV2HighKBytesThreshold		1.3.6.1.4.1.789.1.4.6.1.18
A number of KBytes that when used by this entry produces a warning message. This object returns the most significant 32 bits of the 64 bit unsigned integer. This will return 0 if qrV2ThresholdUnlimited is true.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

qrV2LowKBytesThreshold		1.3.6.1.4.1.789.1.4.6.1.19
A number of KBytes that when used by this entry produces a warning message. This object returns the least significant 32 bits of the 64 bit unsigned integer. This will return 0 if qrV2ThresholdUnlimited is true.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

qrV2SoftQuotaUnlimited		1.3.6.1.4.1.789.1.4.6.1.20
This flag designates whether or not the size based soft quota limit for this qrV2Entry is unlimited. If false(1) then qrV2HighKBytesSoftLimit and qrV2LowKBytesSoftLimit are valid, if true(0) both qrV2HighKBytesSoftLimit and qrV2LowKBytesSoftLimit are unused and will return 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

qrV2HighKBytesSoftLimit		1.3.6.1.4.1.789.1.4.6.1.21
The limit of KBytes that can be used for this qrV2Entry before a warning message and SNMP trap is produced. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

qrV2LowKBytesSoftLimit		1.3.6.1.4.1.789.1.4.6.1.22
The limit of KBytes that can be used for this qrV2Entry before a warning message and SNMP trap is produced. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

qrV2SoftFileQuotaUnlimited		1.3.6.1.4.1.789.1.4.6.1.23
This flag designates whether or not the file based soft quota limit for this qrV2Entry is unlimited. If false(1) then qrV2SoftFileLimit is valid, if true(0) qrV2SoftFileLimit is unused and will return 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

qrV2SoftFileLimit		1.3.6.1.4.1.789.1.4.6.1.24
The limit of files that can be used for this qrV2Entry before a warning message and SNMP trap is produced. This will return 0 if qrV2SoftFileQuotaUnlimited is true.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

filesysMaxfilesAvail		1.3.6.1.4.1.789.1.5.1
The count of the maximum number of files allowable on the root volume. This object is deprecated - use dfEntry.dfMaxFilesAvail instead.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

filesysMaxfilesUsed		1.3.6.1.4.1.789.1.5.2
The count of the number of files currently in use on the root volume. This object is deprecated - use dfEntry.dfMaxFilesUsed instead.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

filesysMaxfilesPossible		1.3.6.1.4.1.789.1.5.3
The largest value to which the filesysMaxfilesAvail parameter above can be increased by reconfiguration on the root volume. This object is deprecated - use dfEntry.dfMaxFilesPossible.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

dfTable		1.3.6.1.4.1.789.1.5.4
Provide a report of the available disk space on the file systems. The tables shows the available disk space for volumes as well as aggregates.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DfEntry

snapshot		1.3.6.1.4.1.789.1.5.5
OBJECT IDENTIFIER

dfEntry		1.3.6.1.4.1.789.1.5.4.1
Provide a report of the available disk space on the referenced file system.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DfEntry

dfIndex		1.3.6.1.4.1.789.1.5.4.1.1
A number that identifies this entry for the referenced file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

dfFileSys		1.3.6.1.4.1.789.1.5.4.1.2
The name for the referenced file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

dfKBytesTotal		1.3.6.1.4.1.789.1.5.4.1.3
The total capacity in KBytes for the referenced file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfKBytesUsed		1.3.6.1.4.1.789.1.5.4.1.4
The total disk space in KBytes that is in use on the referenced file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfKBytesAvail		1.3.6.1.4.1.789.1.5.4.1.5
The total disk space in KBytes that is free for use on the referenced file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfPerCentKBytesCapacity		1.3.6.1.4.1.789.1.5.4.1.6
The percentage of disk space currently in use on the referenced file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfInodesUsed		1.3.6.1.4.1.789.1.5.4.1.7
The total number of inodes in use on the referenced file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfInodesFree		1.3.6.1.4.1.789.1.5.4.1.8
The total number of inodes that are available for use on the referenced file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfPerCentInodeCapacity		1.3.6.1.4.1.789.1.5.4.1.9
The percentage of disk space currently in use based on inode counts, on the referenced file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfMountedOn		1.3.6.1.4.1.789.1.5.4.1.10
The name of the file on which this file system is mounted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

dfMaxFilesAvail		1.3.6.1.4.1.789.1.5.4.1.11
The count of the maximum number of files allowable on the referenced file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfMaxFilesUsed		1.3.6.1.4.1.789.1.5.4.1.12
The count of the number of files currently in use on the referenced file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfMaxFilesPossible		1.3.6.1.4.1.789.1.5.4.1.13
The largest value to which the filesysMaxfilesAvail parameter above can be increased by reconfiguration on the referenced file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfHighTotalKBytes		1.3.6.1.4.1.789.1.5.4.1.14
The total capacity in KBytes for the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfLowTotalKBytes		1.3.6.1.4.1.789.1.5.4.1.15
The total capacity in KBytes for the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfHighUsedKBytes		1.3.6.1.4.1.789.1.5.4.1.16
The total disk space in KBytes that is in use on the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfLowUsedKBytes		1.3.6.1.4.1.789.1.5.4.1.17
The total disk space in KBytes that is in use on the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfHighAvailKBytes		1.3.6.1.4.1.789.1.5.4.1.18
The total disk space in KBytes that is free for use on the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfLowAvailKBytes		1.3.6.1.4.1.789.1.5.4.1.19
The total disk space in KBytes that is free for use on the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfStatus		1.3.6.1.4.1.789.1.5.4.1.20
The status of the file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unmounted(1), mounted(2), frozen(3), destroying(4), creating(5), mounting(6), unmounting(7), nofsinfo(8), replaying(9), replayed(10)

dfMirrorStatus		1.3.6.1.4.1.789.1.5.4.1.21
Overall mirror status of the file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	invalid(1), uninitialized(2), needcpcheck(3), cpcheckwait(4), unmirrored(5), normal(6), degraded(7), resyncing(8), failed(9), limbo(10)

dfPlexCount		1.3.6.1.4.1.789.1.5.4.1.22
Number of plexes in this file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dfType		1.3.6.1.4.1.789.1.5.4.1.23
Indicates the type of container.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	traditionalVolume(1), flexibleVolume(2), aggregate(3)

slTable		1.3.6.1.4.1.789.1.5.5.1
Provide a report of the snapshots on the root volume. This table is deprecated - use slVTable instead.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SlEntry

slEntry		1.3.6.1.4.1.789.1.5.5.1.1
Provide a report on a given snapshot on the root volume. This object is deprecated - use slVEntry instead.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	SlEntry

slIndex		1.3.6.1.4.1.789.1.5.5.1.1.1
A number that identifies this entry for the referenced file system.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

slMonth		1.3.6.1.4.1.789.1.5.5.1.1.2
The month in which the snapshot was created.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	january(1), february(2), march(3), april(4), may(5), june(6), july(7), august(8), september(9), october(10), november(11), december(12)

slDay		1.3.6.1.4.1.789.1.5.5.1.1.3
The day on which the snapshot was created.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	1..31

slHour		1.3.6.1.4.1.789.1.5.5.1.1.4
The hour in which the snapshot was created.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	0..23

slMinutes		1.3.6.1.4.1.789.1.5.5.1.1.5
The minute in which the snapshot was created.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	0..59

slName		1.3.6.1.4.1.789.1.5.5.1.1.6
The name of the referenced snapshot.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString

slVTable		1.3.6.1.4.1.789.1.5.5.2
Provide a report of the snapshots on the file systems.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SlVEntry

slVEntry		1.3.6.1.4.1.789.1.5.5.2.1
Provide a report on a given snapshot on the file system. Indices select the volume of the snapshot and the snapshot entry itself.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SlVEntry

slVIndex		1.3.6.1.4.1.789.1.5.5.2.1.1
A number that identifies this entry for the referenced file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

slVMonth		1.3.6.1.4.1.789.1.5.5.2.1.2
The month in which the snapshot was created.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	january(1), february(2), march(3), april(4), may(5), june(6), july(7), august(8), september(9), october(10), november(11), december(12)

slVDay		1.3.6.1.4.1.789.1.5.5.2.1.3
The day on which the snapshot was created.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..31

slVHour		1.3.6.1.4.1.789.1.5.5.2.1.4
The hour in which the snapshot was created.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..23

slVMinutes		1.3.6.1.4.1.789.1.5.5.2.1.5
The minute in which the snapshot was created.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..59

slVName		1.3.6.1.4.1.789.1.5.5.2.1.6
The name of the referenced snapshot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

slVVolume		1.3.6.1.4.1.789.1.5.5.2.1.7
A number that identifies the volume / aggregate that contains this snapshot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

slVNumber		1.3.6.1.4.1.789.1.5.5.2.1.8
Number of snapshots for this volume / aggregate.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

slVVolumeName		1.3.6.1.4.1.789.1.5.5.2.1.9
The name of the volume / aggregate. This does not have a /vol/ prefix.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

slVType		1.3.6.1.4.1.789.1.5.5.2.1.10
Indicates the type of container for this snapshot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	traditionalVolume(1), flexibleVolume(2), aggregate(3)

slQTable		1.3.6.1.4.1.789.1.5.5.3
Provide a report of the snapshots and their contents on the file systems.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SlQEntry

slQEntry		1.3.6.1.4.1.789.1.5.5.3.1
Provide a report on a given snapshot for a given qtree on the file system. Indices select the volume and qtree of the snapshot and the snapshot entry itself.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SlQEntry

slQIndex		1.3.6.1.4.1.789.1.5.5.3.1.1
A number that identifies this entry for the referenced file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

slQVolume		1.3.6.1.4.1.789.1.5.5.3.1.2
A number that identifies the volume that contains this snapshot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

slQQtree		1.3.6.1.4.1.789.1.5.5.3.1.3
A number that identifies the qtree that contains this snapshot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

slQSnapshotName		1.3.6.1.4.1.789.1.5.5.3.1.4
The name of the referenced snapshot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

slQSnapshotTime		1.3.6.1.4.1.789.1.5.5.3.1.5
Time of the snapshot on the system. The time in seconds since January 1, 1970.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

slQQtreeName		1.3.6.1.4.1.789.1.5.5.3.1.6
A string that indicates which qtree is in this snapshot
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

slQQtreeContent		1.3.6.1.4.1.789.1.5.5.3.1.7
The content of the qtree tree
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	replica(1), transitioning(2), original(3)

slQSource		1.3.6.1.4.1.789.1.5.5.3.1.8
The source of this qtree for a replicated qtree. '-' for a original qtree.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

slQSourceTime		1.3.6.1.4.1.789.1.5.5.3.1.9
Time of the source snapshot for a replicated qtree. Time of the current snapshot for an original qtree. The time in seconds since January 1, 1970. 0 if the qtree is in a transitioning stage
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

slQVolumeName		1.3.6.1.4.1.789.1.5.5.3.1.10
The name of the volume. This does not have a /vol/ prefix.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

dfNumber		1.3.6.1.4.1.789.1.5.6
Number of entries in the dfTable table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

fsStatus		1.3.6.1.4.1.789.1.5.7
OBJECT IDENTIFIER

fsOverallStatus		1.3.6.1.4.1.789.1.5.7.1
An indication of overall file system health. 'ok' indicates that all file systems have adequate space. 'nearlyFull' means that one or more is nearly full (more than 95% full). 'full' means that one or more are more than 98% full.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), nearlyFull(2), full(3)

fsStatusMessage		1.3.6.1.4.1.789.1.5.7.2
A string indicating any file systems which are full or nearly full.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

fsMaxUsedBytesPerCent		1.3.6.1.4.1.789.1.5.7.3
The percentage of space currently in use by the file system which is most full.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

fsMaxUsedInodesPerCent		1.3.6.1.4.1.789.1.5.7.4
The percentage of inodes currently in use by the file system which is most full.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

fsMaxUsedReservedPerCent		1.3.6.1.4.1.789.1.5.7.5
The percentage of reserved space currently in use by the file system which is most full.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

volTable		1.3.6.1.4.1.789.1.5.8
List the volumes defined on the system, including offline volumes.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VolEntry

volEntry		1.3.6.1.4.1.789.1.5.8.1
Provide details about a particular volume.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VolEntry

volIndex		1.3.6.1.4.1.789.1.5.8.1.1
A number that identifies this volume. The volIndex is not related to any other table defined in this MIB, and may change as volumes are created and destroyed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2048

volName		1.3.6.1.4.1.789.1.5.8.1.2
Name of the volume. This includes no /vol/ prefix.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

volFSID		1.3.6.1.4.1.789.1.5.8.1.3
Unique identifier for this volume.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

volOwningHost		1.3.6.1.4.1.789.1.5.8.1.4
Indication of which host owns this volume.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	local(1), partner(2)

volState		1.3.6.1.4.1.789.1.5.8.1.5
State of the volume, such as 'online' or 'offline'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

volStatus		1.3.6.1.4.1.789.1.5.8.1.6
Status of the volume, such as 'normal' or 'reconstructing'. May include several values separated by comma and space.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

volOptions		1.3.6.1.4.1.789.1.5.8.1.7
Options associated with the volume, such as 'root' and 'nosnapdir=off'. May include several values separated by comma.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

volUUID		1.3.6.1.4.1.789.1.5.8.1.8
A unique id associated with the volume.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

volAggrName		1.3.6.1.4.1.789.1.5.8.1.9
Name of the aggregate this flexible volume is a part of.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString

volType		1.3.6.1.4.1.789.1.5.8.1.10
Type of this volume, older volumes are traditional while newer volumes contained in aggregates are flexible.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	traditional(1), flexible(2)

volClone		1.3.6.1.4.1.789.1.5.8.1.11
True indicates flexible volume is a clone.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

volCloneOf		1.3.6.1.4.1.789.1.5.8.1.12
Name of flexible volume this flexible volume is a clone of.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString

volCloneSnap		1.3.6.1.4.1.789.1.5.8.1.13
Name of original cloned snapshot.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString

volNumber		1.3.6.1.4.1.789.1.5.9
Number of volumes in the volTable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..2048

qtreeTable		1.3.6.1.4.1.789.1.5.10
Provide a list of the qtrees on the system.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		QtreeEntry

qtreeEntry		1.3.6.1.4.1.789.1.5.10.1
Provide details about a particular qtree.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	QtreeEntry

qtreeIndex		1.3.6.1.4.1.789.1.5.10.1.1
Index into the qtree table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

qtreeVolume		1.3.6.1.4.1.789.1.5.10.1.2
A number that identifies the volume that contains this qtree.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

qtreeVolumeName		1.3.6.1.4.1.789.1.5.10.1.3
The name of the volume that contains this qtree. This includes no /vol/prefix.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

qtreeId		1.3.6.1.4.1.789.1.5.10.1.4
The Id number of the qtree.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

qtreeName		1.3.6.1.4.1.789.1.5.10.1.5
The name of the qtree.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

qtreeStyle		1.3.6.1.4.1.789.1.5.10.1.6
The security style of the qtree.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unix(1), ntfs(2), mixed(3)

qtreeStatus		1.3.6.1.4.1.789.1.5.10.1.7
The status of the qtree.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), snapmirrored(2), snapvaulted(3)

qtreeOplock		1.3.6.1.4.1.789.1.5.10.1.8
An indication of whether the oplocks is enabled or not for this qtree.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

aggrTable		1.3.6.1.4.1.789.1.5.11
List the aggregates defined on the system, including offline aggregates.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AggrEntry

aggrEntry		1.3.6.1.4.1.789.1.5.11.1
Provide details about a particular aggregate.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AggrEntry

aggrIndex		1.3.6.1.4.1.789.1.5.11.1.1
A number that identifies this aggregate. The aggrIndex is not related to any other table defined in this MIB, and may change as aggregates are created and destroyed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2048

aggrName		1.3.6.1.4.1.789.1.5.11.1.2
Name of the aggregate. This includes no /vol/ prefix.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

aggrFSID		1.3.6.1.4.1.789.1.5.11.1.3
Unique identifier for this aggregate.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

aggrOwningHost		1.3.6.1.4.1.789.1.5.11.1.4
Indication of which host owns this aggregate.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	local(1), partner(2)

aggrState		1.3.6.1.4.1.789.1.5.11.1.5
State of the aggregate, such as 'online' or 'offline'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

aggrStatus		1.3.6.1.4.1.789.1.5.11.1.6
Status of the aggregate, such as 'normal' or 'reconstructing'. May include several values separated by comma and space.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

aggrOptions		1.3.6.1.4.1.789.1.5.11.1.7
Options associated with the aggregate.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

aggrUUID		1.3.6.1.4.1.789.1.5.11.1.8
A unique id associated with the aggregate.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

aggrFlexvollist		1.3.6.1.4.1.789.1.5.11.1.9
List of all the flexible volumes within this aggregate.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..1024)

aggrType		1.3.6.1.4.1.789.1.5.11.1.10
Type of this container, containers containing flexible volumes are aggregate.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	traditional(1), aggregate(2)

aggrNumber		1.3.6.1.4.1.789.1.5.12
Number of aggregates in the aggrTable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..2048

raidTable		1.3.6.1.4.1.789.1.6.1
Display RAID configuration information for the root volume. This table is deprecated - use raidVTable instead.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RaidEntry

raidEntry		1.3.6.1.4.1.789.1.6.1.1
Display RAID configuration information for the referenced disk drive. This only works for disks contained within the root volume, and will include spare drives. This object is deprecated - use raidVEntry instead.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	RaidEntry

raidIndex		1.3.6.1.4.1.789.1.6.1.1.1
A number that identifies this entry for the referenced disk drive.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

raidDiskName		1.3.6.1.4.1.789.1.6.1.1.2
The name identifying the referenced disk drive.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString

raidStatus		1.3.6.1.4.1.789.1.6.1.1.3
The status of the referenced disk drive.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), reconstructionInProgress(2), parityReconstructionInProgress(3), parityVerificationInProgress(4), scrubbingInProgress(5), failed(6), addingSpare(7), spare(8), prefailed(9)

raidDiskId		1.3.6.1.4.1.789.1.6.1.1.4
The disk identifier for the referenced disk drive.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

raidScsiAdapter		1.3.6.1.4.1.789.1.6.1.1.5
The identifier of the SCSI adapter for the referenced disk drive.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString

raidScsiId		1.3.6.1.4.1.789.1.6.1.1.6
The identifier for the referenced disk drive on the referenced SCSI adapter.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

raidUsedMb		1.3.6.1.4.1.789.1.6.1.1.7
The number of MBytes currently in use on the referenced disk drive.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

raidUsedBlocks		1.3.6.1.4.1.789.1.6.1.1.8
The number of Blocks currently in use on the referenced disk drive.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

raidTotalMb		1.3.6.1.4.1.789.1.6.1.1.9
The number of MBytes physically available on the referenced disk drive.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

raidTotalBlocks		1.3.6.1.4.1.789.1.6.1.1.10
The number of Blocks physically available on the referenced disk drive.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

raidCompletionPerCent		1.3.6.1.4.1.789.1.6.1.1.11
In the case when reconstruction/adding a spare, verification or scrubbing is in progress, the percent of such reconstruction, verification or scrubbing that has been completed on the referenced disk drive.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

raidVTable		1.3.6.1.4.1.789.1.6.2
Display RAID configuration information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RaidVEntry

raidVEntry		1.3.6.1.4.1.789.1.6.2.1
Display RAID configuration information for the referenced volume, raid group, and disk drive.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RaidVEntry

raidVIndex		1.3.6.1.4.1.789.1.6.2.1.1
A number that identifies this disk drive within the given volume and RAID group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

raidVDiskName		1.3.6.1.4.1.789.1.6.2.1.2
The name identifying the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidVStatus		1.3.6.1.4.1.789.1.6.2.1.3
The status of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), reconstructionInProgress(2), parityReconstructionInProgress(3), parityVerificationInProgress(4), scrubbingInProgress(5), failed(6), prefailed(9)

raidVDiskId		1.3.6.1.4.1.789.1.6.2.1.4
The disk identifier for the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidVScsiAdapter		1.3.6.1.4.1.789.1.6.2.1.5
The identifier of the SCSI adapter for the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidVScsiId		1.3.6.1.4.1.789.1.6.2.1.6
The identifier for the referenced disk drive on the referenced SCSI adapter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

raidVUsedMb		1.3.6.1.4.1.789.1.6.2.1.7
The number of MBytes currently in use on the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidVUsedBlocks		1.3.6.1.4.1.789.1.6.2.1.8
The number of Blocks currently in use on the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidVTotalMb		1.3.6.1.4.1.789.1.6.2.1.9
The number of MBytes physically available on the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidVTotalBlocks		1.3.6.1.4.1.789.1.6.2.1.10
The number of Blocks physically available on the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidVCompletionPerCent		1.3.6.1.4.1.789.1.6.2.1.11
In the case when rapid raid recovery, disk copy, reconstruction/adding a spare, verification or scrubbing is in progress, the percent of such copy, reconstruction, verification or scrubbing that has been completed on the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

raidVVol		1.3.6.1.4.1.789.1.6.2.1.12
A number that identifies the volume that this entry belongs to. The first volume is '1'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

raidVGroup		1.3.6.1.4.1.789.1.6.2.1.13
A number that identifies the RAID group within the given volume that this entry belongs to. The first RAID group is '1', and number across all plexes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

raidVDiskNumber		1.3.6.1.4.1.789.1.6.2.1.14
The number of disks within this RAID group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidVGroupNumber		1.3.6.1.4.1.789.1.6.2.1.15
The number of RAID groups within this volume.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidVDiskPort		1.3.6.1.4.1.789.1.6.2.1.16
A number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	portA(1), portB(2), portSingle(3), portNone(4)

raidVSecondaryDiskName		1.3.6.1.4.1.789.1.6.2.1.17
The name identifying the secondary path to the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidVSecondaryDiskPort		1.3.6.1.4.1.789.1.6.2.1.18
A number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	portA(1), portB(2), portSingle(3), portNone(4)

raidVShelf		1.3.6.1.4.1.789.1.6.2.1.19
Number identifying the shelf where the disk is located.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidVBay		1.3.6.1.4.1.789.1.6.2.1.20
Number identifying the disk bay within the shelf where the disk is located.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidVPlex		1.3.6.1.4.1.789.1.6.2.1.21
A number that identifies the plex within the given volume that this entry belongs to. The first plex is '1'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidVPlexGroup		1.3.6.1.4.1.789.1.6.2.1.22
A number that identifies the RAID group within the given plex that this entry belongs to. The first RAID group is '1'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidVPlexNumber		1.3.6.1.4.1.789.1.6.2.1.23
The number of plexes within this volume. This number is always 1 or 2.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2

raidVPlexName		1.3.6.1.4.1.789.1.6.2.1.24
A name that identifies the plex that this entry belongs to. A plex name can be anything, but is usually a string like 'plex0' or 'plex1'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidVSectorSize		1.3.6.1.4.1.789.1.6.2.1.25
A number that specifies bytes per sector for this entry. Values are '512' or '520'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidVDiskSerialNumber		1.3.6.1.4.1.789.1.6.2.1.26
Serial number of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidVDiskVendor		1.3.6.1.4.1.789.1.6.2.1.27
The vendor of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidVDiskModel		1.3.6.1.4.1.789.1.6.2.1.28
Model string of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidVDiskFirmwareRevision		1.3.6.1.4.1.789.1.6.2.1.29
Firmware revision number of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidVDiskRPM		1.3.6.1.4.1.789.1.6.2.1.30
RPM of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidVDiskType		1.3.6.1.4.1.789.1.6.2.1.31
Interface type of the referenced disk drive. e.g SCSI, or ATA.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidVDiskPool		1.3.6.1.4.1.789.1.6.2.1.32
A name that identifies the disk pool that this entry belongs to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidVDiskCopyDestDiskName		1.3.6.1.4.1.789.1.6.2.1.33
When raidVStatus value is prefailed, this string identifies the name of the disk which is the copy target of the referenced prefailed disk.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

spareTable		1.3.6.1.4.1.789.1.6.3
Display spare disk configuration information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SpareEntry

spareEntry		1.3.6.1.4.1.789.1.6.3.1
Display configuration information for the referenced spare disk drive.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SpareEntry

spareIndex		1.3.6.1.4.1.789.1.6.3.1.1
A number that identifies this entry for the referenced disk drive in the list of spare disk drives.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

spareDiskName		1.3.6.1.4.1.789.1.6.3.1.2
The name identifying the referenced spare disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

spareStatus		1.3.6.1.4.1.789.1.6.3.1.3
The status of the referenced spare disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	spare(1), addingspare(2), bypassed(3), unknown(4)

spareDiskId		1.3.6.1.4.1.789.1.6.3.1.4
The disk identifier for the referenced spare disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

spareScsiAdapter		1.3.6.1.4.1.789.1.6.3.1.5
The identifier of the SCSI adapter for the referenced spare disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

spareScsiId		1.3.6.1.4.1.789.1.6.3.1.6
The identifier for the referenced spare disk drive on the referenced SCSI adapter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

spareTotalMb		1.3.6.1.4.1.789.1.6.3.1.7
The number of MBytes physically available on the referenced spare disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

spareTotalBlocks		1.3.6.1.4.1.789.1.6.3.1.8
The number of Blocks physically available on the referenced spare disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

spareDiskPort		1.3.6.1.4.1.789.1.6.3.1.9
A number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	portA(1), portB(2), portSingle(3), portNone(4)

spareSecondaryDiskName		1.3.6.1.4.1.789.1.6.3.1.10
The name identifying the secondary path to the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

spareSecondaryDiskPort		1.3.6.1.4.1.789.1.6.3.1.11
A number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	portA(1), portB(2), portSingle(3), portNone(4)

spareShelf		1.3.6.1.4.1.789.1.6.3.1.12
Number identifying the shelf where the disk is located.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

spareBay		1.3.6.1.4.1.789.1.6.3.1.13
Number identifying the disk bay within the shelf where the disk is located.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

sparePool		1.3.6.1.4.1.789.1.6.3.1.14
A name that identifies the disk pool that this entry belongs to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

spareSectorSize		1.3.6.1.4.1.789.1.6.3.1.15
A number that specifies bytes per sector for this entry. Values are '512' or '520'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

spareDiskSerialNumber		1.3.6.1.4.1.789.1.6.3.1.16
Serial number of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

spareDiskVendor		1.3.6.1.4.1.789.1.6.3.1.17
The vendor of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

spareDiskModel		1.3.6.1.4.1.789.1.6.3.1.18
Model string of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

spareDiskFirmwareRevision		1.3.6.1.4.1.789.1.6.3.1.19
Firmware revision number of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

spareDiskRPM		1.3.6.1.4.1.789.1.6.3.1.20
RPM of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

spareDiskType		1.3.6.1.4.1.789.1.6.3.1.21
Interface type of the referenced disk drive. e.g SCSI, or ATA.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

diskSummary		1.3.6.1.4.1.789.1.6.4
OBJECT IDENTIFIER

diskTotalCount		1.3.6.1.4.1.789.1.6.4.1
The total number of disks on the system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

diskActiveCount		1.3.6.1.4.1.789.1.6.4.2
The number of disks which are currently active, including parity disks.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

diskReconstructingCount		1.3.6.1.4.1.789.1.6.4.3
The number of disks which are currently being reconstructed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

diskReconstructingParityCount		1.3.6.1.4.1.789.1.6.4.4
The number of parity disks which are currently being reconstructed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

diskVerifyingParityCount		1.3.6.1.4.1.789.1.6.4.5
The number of parity disks which are currently being verified.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

diskScrubbingCount		1.3.6.1.4.1.789.1.6.4.6
The number of disks which are currently being scrubbed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

diskFailedCount		1.3.6.1.4.1.789.1.6.4.7
The number of disks which are currently broken.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

diskSpareCount		1.3.6.1.4.1.789.1.6.4.8
The number of available spare disks.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

diskAddingSpareCount		1.3.6.1.4.1.789.1.6.4.9
The number of spare disks which are currently being added into a RAID group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

diskFailedMessage		1.3.6.1.4.1.789.1.6.4.10
If diskFailedCount is non-zero, this is a string describing the failed disk or disks. Each failed disk is described with a sentence like Parity disk in volume vol0, RAID group 1, failed. or Disk on adapter 8a, shelf 1, bay 0, failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

diskPrefailedCount		1.3.6.1.4.1.789.1.6.4.11
The number of disks which are prefailed and marked for rapid raid recovery.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidVNumber		1.3.6.1.4.1.789.1.6.5
Number of entries in the raidVTable table. This is the number of volumes in the system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

spareNumber		1.3.6.1.4.1.789.1.6.6
Number of entries in the spareTable table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

otherDiskNumber		1.3.6.1.4.1.789.1.6.7
Number of entries in the otherDiskTable table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidPNumber		1.3.6.1.4.1.789.1.6.8
Number of entries in the raidPTable table. This is the number of volumes in the system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

otherDiskTable		1.3.6.1.4.1.789.1.6.9
Display out-of-service disk configuration information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OtherDiskEntry

otherDiskEntry		1.3.6.1.4.1.789.1.6.9.1
Display configuration information for the referenced disk drive.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	OtherDiskEntry

otherDiskIndex		1.3.6.1.4.1.789.1.6.9.1.1
A number that identifies this entry for the referenced disk drive in the list of out-of-service diskdrives. Out-of-service disks include all disks that are not in service in a raid group or available as a spare disk.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

otherDiskDiskName		1.3.6.1.4.1.789.1.6.9.1.2
The name identifying the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

otherDiskStatus		1.3.6.1.4.1.789.1.6.9.1.3
The status of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	broken(1), bypassed(2), unknown(3)

otherDiskDiskId		1.3.6.1.4.1.789.1.6.9.1.4
The disk identifier for the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

otherDiskScsiAdapter		1.3.6.1.4.1.789.1.6.9.1.5
The identifier of the SCSI adapter for the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

otherDiskScsiId		1.3.6.1.4.1.789.1.6.9.1.6
The identifier for the referenced disk drive on the referenced SCSI adapter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

otherDiskTotalMb		1.3.6.1.4.1.789.1.6.9.1.7
The number of MBytes physically available on the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

otherDiskTotalBlocks		1.3.6.1.4.1.789.1.6.9.1.8
The number of Blocks physically available on the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

otherDiskDiskPort		1.3.6.1.4.1.789.1.6.9.1.9
A number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	portA(1), portB(2), portSingle(3), portNone(4)

otherDiskSecondaryDiskName		1.3.6.1.4.1.789.1.6.9.1.10
The name identifying the secondary path to the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

otherDiskSecondaryDiskPort		1.3.6.1.4.1.789.1.6.9.1.11
A number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	portA(1), portB(2), portSingle(3), portNone(4)

otherDiskShelf		1.3.6.1.4.1.789.1.6.9.1.12
Number identifying the shelf where the disk is located.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

otherDiskBay		1.3.6.1.4.1.789.1.6.9.1.13
Number identifying the disk bay within the shelf where the disk is located.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

otherDiskPool		1.3.6.1.4.1.789.1.6.9.1.14
A name that identifies the disk pool that this entry belongs to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

otherDiskSectorSize		1.3.6.1.4.1.789.1.6.9.1.15
A number that specifies bytes per sector for this entry. Values are '512' or '520'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

otherDiskSerialNumber		1.3.6.1.4.1.789.1.6.9.1.16
Serial number of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

otherDiskVendor		1.3.6.1.4.1.789.1.6.9.1.17
The vendor of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

otherDiskModel		1.3.6.1.4.1.789.1.6.9.1.18
Model string of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

otherDiskFirmwareRevision		1.3.6.1.4.1.789.1.6.9.1.19
Firmware revision number of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

otherDiskRPM		1.3.6.1.4.1.789.1.6.9.1.20
RPM of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

otherDiskType		1.3.6.1.4.1.789.1.6.9.1.21
Interface type of the referenced disk drive. e.g SCSI, or ATA.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidPTable		1.3.6.1.4.1.789.1.6.10
Display RAID configuration information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RaidPEntry

raidPEntry		1.3.6.1.4.1.789.1.6.10.1
Display RAID configuration information for the referenced volume, plex, raid group, and disk drive.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RaidPEntry

raidPIndex		1.3.6.1.4.1.789.1.6.10.1.1
A number that identifies this disk drive within the given volume and RAID group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

raidPStatus		1.3.6.1.4.1.789.1.6.10.1.2
The status of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), reconstructionInProgress(2), parityReconstructionInProgress(3), parityVerificationInProgress(4), scrubbingInProgress(5), failed(6), prefailed(9)

raidPVol		1.3.6.1.4.1.789.1.6.10.1.3
A number that identifies the volume that this entry belongs to. The first volume is '1'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

raidPPlex		1.3.6.1.4.1.789.1.6.10.1.4
A number that identifies the plex that this entry belongs to. The first plex is '1'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

raidPGroup		1.3.6.1.4.1.789.1.6.10.1.5
A number that identifies the RAID group within the given plex that this entry belongs to. The first RAID group is '1'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

raidPPlexNumber		1.3.6.1.4.1.789.1.6.10.1.6
The number of plexes within this volume. This number is always 1 or 2.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2

raidPGroupNumber		1.3.6.1.4.1.789.1.6.10.1.7
The number of RAID groups within this plex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidPDiskNumber		1.3.6.1.4.1.789.1.6.10.1.8
The number of disks within this RAID group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

raidPPlexName		1.3.6.1.4.1.789.1.6.10.1.9
A name that identifies the plex that this entry belongs to. A plex name can be anything, but is usually a string like 'plex0' or 'plex1'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidPDiskName		1.3.6.1.4.1.789.1.6.10.1.10
The name identifying the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidPDiskPort		1.3.6.1.4.1.789.1.6.10.1.11
A number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	portA(1), portB(2), portSingle(3), portNone(4)

raidPSecondaryDiskName		1.3.6.1.4.1.789.1.6.10.1.12
The name identifying the secondary path to the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidPSecondaryDiskPort		1.3.6.1.4.1.789.1.6.10.1.13
A number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	portA(1), portB(2), portSingle(3), portNone(4)

raidPScsiAdapter		1.3.6.1.4.1.789.1.6.10.1.14
The identifier of the SCSI adapter for the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidPScsiId		1.3.6.1.4.1.789.1.6.10.1.15
The identifier for the referenced disk drive on the referenced SCSI adapter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

raidPDiskId		1.3.6.1.4.1.789.1.6.10.1.16
The disk identifier for the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidPShelf		1.3.6.1.4.1.789.1.6.10.1.17
Number identifying the shelf where the disk is located.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidPBay		1.3.6.1.4.1.789.1.6.10.1.18
Number identifying the disk bay within the shelf where the disk is located.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidPSectorSize		1.3.6.1.4.1.789.1.6.10.1.19
A number that specifies bytes per sector for this entry. Values are '512' or '520'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidPUsedMb		1.3.6.1.4.1.789.1.6.10.1.20
The number of MBytes currently in use on the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidPUsedBlocks		1.3.6.1.4.1.789.1.6.10.1.21
The number of Blocks currently in use on the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidPTotalMb		1.3.6.1.4.1.789.1.6.10.1.22
The number of MBytes physically available on the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidPTotalBlocks		1.3.6.1.4.1.789.1.6.10.1.23
The number of Blocks physically available on the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

raidPCompletionPerCent		1.3.6.1.4.1.789.1.6.10.1.24
In the case when rapid raid recovery, disk copy, reconstruction or adding a spare, verification or scrubbing is in progress, the percent of such copy, reconstruction, verification or scrubbing that has been completed on the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

raidPDiskSerialNumber		1.3.6.1.4.1.789.1.6.10.1.25
Serial number of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidPDiskVendor		1.3.6.1.4.1.789.1.6.10.1.26
The vendor of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidPDiskModel		1.3.6.1.4.1.789.1.6.10.1.27
Model string of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidPDiskFirmwareRevision		1.3.6.1.4.1.789.1.6.10.1.28
Firmware revision number of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidPDiskRPM		1.3.6.1.4.1.789.1.6.10.1.29
RPM of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidPDiskType		1.3.6.1.4.1.789.1.6.10.1.30
Interface type of the referenced disk drive. e.g SCSI, or ATA.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidPDiskPool		1.3.6.1.4.1.789.1.6.10.1.31
A name that identifies the disk pool that this entry belongs to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

raidPDiskCopyDestDiskName		1.3.6.1.4.1.789.1.6.10.1.32
When raidPStatus value is prefailed, this string identifies the name of the disk which is the copy target of the referenced prefailed disk.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

plexTable		1.3.6.1.4.1.789.1.6.11
A table containing plex specific information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PlexEntry

plexEntry		1.3.6.1.4.1.789.1.6.11.1
Provide a report on file system plexes.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PlexEntry

plexIndex		1.3.6.1.4.1.789.1.6.11.1.1
A number that identifies this entry for the referenced plex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

plexName		1.3.6.1.4.1.789.1.6.11.1.2
The identifier of the plex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

plexVolName		1.3.6.1.4.1.789.1.6.11.1.3
The volume to which this plex belongs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

plexStatus		1.3.6.1.4.1.789.1.6.11.1.4
The status of the plex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	offline(1), resyncing(2), online(3)

plexPercentResyncing		1.3.6.1.4.1.789.1.6.11.1.5
If the plex is resyncing, the percent completion of the resync.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

outOfDateDiskCount		1.3.6.1.4.1.789.1.6.12
Number of entries in the outOfDateDiskTable table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

outOfDateDiskTable		1.3.6.1.4.1.789.1.6.13
Display out-of-date disk information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OutOfDateDiskEntry

outOfDateDiskEntry		1.3.6.1.4.1.789.1.6.13.1
Display information for the referenced out-of-date disk.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	OutOfDateDiskEntry

outOfDateDiskIndex		1.3.6.1.4.1.789.1.6.13.1.1
A number that identifies this entry for the referenced disk drive in the list of out-of-date diskdrives.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

outOfDateDiskDiskName		1.3.6.1.4.1.789.1.6.13.1.2
The name identifying the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

outOfDateDiskDiskId		1.3.6.1.4.1.789.1.6.13.1.3
The disk identifier for the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

outOfDateDiskScsiAdapter		1.3.6.1.4.1.789.1.6.13.1.4
The identifier of the SCSI adapter for the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

outOfDateDiskScsiId		1.3.6.1.4.1.789.1.6.13.1.5
The identifier for the referenced disk drive on the referenced SCSI adapter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

outOfDateDiskTotalMb		1.3.6.1.4.1.789.1.6.13.1.6
The number of MBytes physically available on the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

outOfDateDiskTotalBlocks		1.3.6.1.4.1.789.1.6.13.1.7
The number of Blocks physically available on the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

outOfDateDiskDiskPort		1.3.6.1.4.1.789.1.6.13.1.8
A number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	portA(1), portB(2), portSingle(3), portNone(4)

outOfDateDiskSecondaryDiskName		1.3.6.1.4.1.789.1.6.13.1.9
The name identifying the secondary path to the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

outOfDateDiskSecondaryDiskPort		1.3.6.1.4.1.789.1.6.13.1.10
A number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	portA(1), portB(2), portSingle(3), portNone(4)

outOfDateDiskShelf		1.3.6.1.4.1.789.1.6.13.1.11
Number identifying the shelf where the disk is located.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

outOfDateDiskBay		1.3.6.1.4.1.789.1.6.13.1.12
Number identifying the disk bay within the shelf where the disk is located.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

outOfDateDiskPool		1.3.6.1.4.1.789.1.6.13.1.13
A name that identifies the disk pool that this entry belongs to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

outOfDateDiskSectorSize		1.3.6.1.4.1.789.1.6.13.1.14
A number that specifies bytes per sector for this entry. Values are '512' or '520'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

outOfDateDiskSerialNumber		1.3.6.1.4.1.789.1.6.13.1.15
Serial number of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

outOfDateDiskVendor		1.3.6.1.4.1.789.1.6.13.1.16
The vendor of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

outOfDateDiskModel		1.3.6.1.4.1.789.1.6.13.1.17
Model string of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

outOfDateDiskFirmwareRevision		1.3.6.1.4.1.789.1.6.13.1.18
Firmware revision number of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

outOfDateDiskRPM		1.3.6.1.4.1.789.1.6.13.1.19
RPM of the referenced disk drive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

outOfDateDiskType		1.3.6.1.4.1.789.1.6.13.1.20
Interface type of the referenced disk drive. e.g SCSI, or ATA.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cifsOptions		1.3.6.1.4.1.789.1.7.1
OBJECT IDENTIFIER

cifsInfo		1.3.6.1.4.1.789.1.7.2
OBJECT IDENTIFIER

cifsStats		1.3.6.1.4.1.789.1.7.3
OBJECT IDENTIFIER

cifsMisc		1.3.6.1.4.1.789.1.7.4
OBJECT IDENTIFIER

cifsIsEnabled		1.3.6.1.4.1.789.1.7.1.1
Whether the CIFS protocol is active on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cifsIsLoginEnabled		1.3.6.1.4.1.789.1.7.1.2
Whether new CIFS connections to the filer are currently allowed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cifsHostName		1.3.6.1.4.1.789.1.7.1.3
The host name used by the CIFS protocol on this filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cifsAltNames		1.3.6.1.4.1.789.1.7.1.4
Alternate names recognized by the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cifsDomainJoined		1.3.6.1.4.1.789.1.7.1.5
Has the filer joined an NT domain? If this value is true, cifsDomainName will contain the name of the domain. Otherwise, the filer may have joined a WorkGroup, and cifsWGName will contain the name of the WorkGroup.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cifsDomainName		1.3.6.1.4.1.789.1.7.1.6
The domain name used by the CIFS protocol on this filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cifsWGName		1.3.6.1.4.1.789.1.7.1.7
The workgroup name (if any) used by the CIFS protocol on this filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cifsDCName		1.3.6.1.4.1.789.1.7.1.8
The name of the Domain Controller used by this filer to authenticate users and file requests.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cifsIsWinsEnabled		1.3.6.1.4.1.789.1.7.1.9
True if WINS name resolution is enabled on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cifsWinsServers		1.3.6.1.4.1.789.1.7.1.10
The name(s) of the WINS servers registered with the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cifsSecurityModel		1.3.6.1.4.1.789.1.7.1.11
Which type of authentication semantics (Unix or PC) are in use for PC access to Unix files on the filer. If Unix semantics are in use, no ACL on a Unix file is ever checked. If PC semantics are in use, the share level ACL on the share containing the file is used for authentication instead of the group portion of the permissions on the file.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unix(1), pc(2)

cifsPCGenericUser		1.3.6.1.4.1.789.1.7.1.12
The name of the generic PC user, if any. This username is used for CIFS access by Unix users who have not authenticated through CIFS or NT.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cifsOplocksEnabled		1.3.6.1.4.1.789.1.7.1.15
Whether oplocks are enabled on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	not-enabled(1), enabled(2)

cifsLevel2OplocksEnabled		1.3.6.1.4.1.789.1.7.1.16
Whether level 2 oplocks are enabled on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	not-enabled(1), enabled(2)

cifsPreserveCase		1.3.6.1.4.1.789.1.7.1.17
If this option is set to preserve-case (the default), all filename references will be case preserving. Otherwise, they are forced to lowercase.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no-preserve-case(1), preserve-case(2)

cifsSymlinksEnabled		1.3.6.1.4.1.789.1.7.1.19
If this option is enabled, CIFS accesses will follow symbolic links using Unix semantics.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	not-enabled(1), enabled(2)

cifsSymlinkCycleProtEnabled		1.3.6.1.4.1.789.1.7.1.20
If this option is enabled, CIFS accesses will through symbolic links will check for cycles in the link graph.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	not-enabled(1), enabled(2)

cifsIsLicensed		1.3.6.1.4.1.789.1.7.1.21
Whether the CIFS protocol is licensed on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cifsPerClientStatsEnabled		1.3.6.1.4.1.789.1.7.1.22
True when cifs.per_client_stats are being collected.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cifsStatus		1.3.6.1.4.1.789.1.7.2.1
Encoding of CIFS startup state on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cifsNeedPW		1.3.6.1.4.1.789.1.7.2.2
Does the administrative password need to be set before start?
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cifsTimeToShutdown		1.3.6.1.4.1.789.1.7.2.3
Time remaining until CIFS shutdown
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cifsMaxConnections		1.3.6.1.4.1.789.1.7.2.4
The maximum number of simultaneous CIFS connections allowed on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cifsMaxTrees		1.3.6.1.4.1.789.1.7.2.5
The maximum number of simultaneous CIFS trees allowed on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cifsMaxShares		1.3.6.1.4.1.789.1.7.2.6
The maximum number of simultaneous CIFS shares allowed on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cifsMaxFiles		1.3.6.1.4.1.789.1.7.2.7
The maximum number of concurrently open CIFS files and directories allowed on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cifsMaxACLs		1.3.6.1.4.1.789.1.7.2.8
This object is deprecated, and always has a value of 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cifsConnectedUsers		1.3.6.1.4.1.789.1.7.2.9
The current number of CIFS users on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsNTrees		1.3.6.1.4.1.789.1.7.2.10
The current number of CIFS trees on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsNShares		1.3.6.1.4.1.789.1.7.2.11
The current number of CIFS shares on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsNSessions		1.3.6.1.4.1.789.1.7.2.12
The current number of active CIFS sessions on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsNOpenFiles		1.3.6.1.4.1.789.1.7.2.13
The number of open CIFS files and directories on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsNOpenDirs		1.3.6.1.4.1.789.1.7.2.14
The number of open CIFS directories on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsNOplockBreakWaits		1.3.6.1.4.1.789.1.7.2.16
The number of open files waiting for oplock break messages to be sent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsNOplockAckWaits		1.3.6.1.4.1.789.1.7.2.17
The number of open files waiting for acknowledgements to oplock break messages.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsSuspectOps		1.3.6.1.4.1.789.1.7.2.18
A smoothed average of the number of events per second of the type frequently seen during virus attacks.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cifsServ		1.3.6.1.4.1.789.1.7.3.1
OBJECT IDENTIFIER

cifsOps		1.3.6.1.4.1.789.1.7.3.1.1
OBJECT IDENTIFIER

cifsReqs		1.3.6.1.4.1.789.1.7.3.1.2
OBJECT IDENTIFIER

cifsPercent		1.3.6.1.4.1.789.1.7.3.1.3
OBJECT IDENTIFIER

cifsObsReqs		1.3.6.1.4.1.789.1.7.3.1.4
OBJECT IDENTIFIER

cifsObsPercent		1.3.6.1.4.1.789.1.7.3.1.5
OBJECT IDENTIFIER

cifsTotalOps		1.3.6.1.4.1.789.1.7.3.1.1.1
The number of CIFS operations done by the filer, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsTotalCalls		1.3.6.1.4.1.789.1.7.3.1.1.2
The total number of CIFS calls received, since the last time the statistics were cleared. This is the number of cifsTotalOps plus the number of miscellaneous operations that are not logged which were received in that time period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsBadCalls		1.3.6.1.4.1.789.1.7.3.1.1.3
The total number of received CIFS calls rejected, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsGetAttrs		1.3.6.1.4.1.789.1.7.3.1.1.4
The total number of CIFS operations to get the attributes on a file or directory, since the last time the statistics were reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsReads		1.3.6.1.4.1.789.1.7.3.1.1.5
The total number of CIFS Read operations on a file or directory, since the last time the statistics were reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsWrites		1.3.6.1.4.1.789.1.7.3.1.1.6
The total number of CIFS write operations on a file or directory, since the last time the statistics were reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsLocks		1.3.6.1.4.1.789.1.7.3.1.1.7
The number of CIFS file locking requests since the last time the statistics were reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsOpens		1.3.6.1.4.1.789.1.7.3.1.1.8
The number of calls, via CIFS, to open a file or directory, since the last time the statistics were reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsDirOps		1.3.6.1.4.1.789.1.7.3.1.1.9
The number of CIFS directory operations, since the last time the statistics were reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsOthers		1.3.6.1.4.1.789.1.7.3.1.1.10
The number of CIFS operations, since the last time the statistics were reset, that don't fall into the categories for GetAttr, Read, Write, Lock, DirOp and Open.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbNegProts		1.3.6.1.4.1.789.1.7.3.1.2.1
The number of SMB NEGOTIATE requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbSessionSetupAndXs		1.3.6.1.4.1.789.1.7.3.1.2.2
The number of SMB SESSION_SETUP_ANDX requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbLogoffAndXs		1.3.6.1.4.1.789.1.7.3.1.2.3
The number of SMB LOGOFF_ANDX requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbTreeConnectAndXs		1.3.6.1.4.1.789.1.7.3.1.2.4
The number of SMB TREE_CONNECT_ANDX requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbTreeDisconnects		1.3.6.1.4.1.789.1.7.3.1.2.5
The number of SMB TREE_DISCONNECT requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbTrans2QueryFSInfos		1.3.6.1.4.1.789.1.7.3.1.2.6
The number of SMB TRANS2_QUERY_FS_INFORMATION requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbEchos		1.3.6.1.4.1.789.1.7.3.1.2.7
The number of SMB ECHO requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbNTCancels		1.3.6.1.4.1.789.1.7.3.1.2.8
The number of SMB NT_CANCEL requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbNTCreateAndXs		1.3.6.1.4.1.789.1.7.3.1.2.9
The number of SMB NT_CREATE_ANDX requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbNTTransactCreates		1.3.6.1.4.1.789.1.7.3.1.2.10
The number of SMB NT_TRANSACT_CREATE requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbCreateTemporaries		1.3.6.1.4.1.789.1.7.3.1.2.11
The SMB CREATE_TEMPORARY operation is not presently supported, so this value should always be zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbReadAndXs		1.3.6.1.4.1.789.1.7.3.1.2.12
The number of SMB READ_ANDX requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbWriteAndXs		1.3.6.1.4.1.789.1.7.3.1.2.13
The number of SMB WRITE_ANDX requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbLockingAndXs		1.3.6.1.4.1.789.1.7.3.1.2.14
The number of SMB LOCKING_ANDX requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbSeeks		1.3.6.1.4.1.789.1.7.3.1.2.15
The number of SMB SEEK requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbFlushes		1.3.6.1.4.1.789.1.7.3.1.2.16
The number of SMB FLUSH requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbCloses		1.3.6.1.4.1.789.1.7.3.1.2.17
The number of SMB CLOSE requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbDeletes		1.3.6.1.4.1.789.1.7.3.1.2.18
The number of SMB DELETE requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbRenames		1.3.6.1.4.1.789.1.7.3.1.2.19
The number of SMB RENAME requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbMoves		1.3.6.1.4.1.789.1.7.3.1.2.20
The SMB MOVE request is not presently supported, so this value should always be zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbCopies		1.3.6.1.4.1.789.1.7.3.1.2.21
The SMB COPY request is not presently supported, so this value should always be zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbTrans2QueryPathInfos		1.3.6.1.4.1.789.1.7.3.1.2.22
The number of SMB TRANS2_QUERY_PATH_INFORMATION requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbTrans2QueryFileInfos		1.3.6.1.4.1.789.1.7.3.1.2.23
The number of SMB TRANS2_QUERY_FILE_INFORMATION requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbTrans2SetPathInfos		1.3.6.1.4.1.789.1.7.3.1.2.24
The number of SMB TRANS2_SET_PATH_INFORMATION requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbTrans2SetFileInfos		1.3.6.1.4.1.789.1.7.3.1.2.25
The number of SMB TRANS2_SET_FILE_INFORMATION requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbDeleteDirs		1.3.6.1.4.1.789.1.7.3.1.2.26
The number of SMB DELETE_DIRECTORY requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbCheckDirs		1.3.6.1.4.1.789.1.7.3.1.2.27
The SMB COPY request is not presently supported, so this value should always be zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbTrans2FindFirst2s		1.3.6.1.4.1.789.1.7.3.1.2.28
The number of SMB TRANS2_FIND_FIRST2 requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbTrans2FindNext2s		1.3.6.1.4.1.789.1.7.3.1.2.29
The number of SMB TRANS2_FIND_NEXT2 requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbFindClose2s		1.3.6.1.4.1.789.1.7.3.1.2.30
The number of SMB FIND_CLOSE2 requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbNTTransactNotifyChgs		1.3.6.1.4.1.789.1.7.3.1.2.31
The number of SMB NT_TRANSACT_NOTIFY_CHANGE requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbTrans2GetDFSReferrals		1.3.6.1.4.1.789.1.7.3.1.2.32
The SMB TRANS2_GET_DFS_REFERRAL request is not presently supported, so this value should always be zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbTrans2ReportDFSIncs		1.3.6.1.4.1.789.1.7.3.1.2.33
The SMB TRANS2_REPORT_DFS_INCONSISTENCY request is not presently supported, so this value should always be zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbOpenPrintFiles		1.3.6.1.4.1.789.1.7.3.1.2.34
The SMB OPEN_PRINT_FILE request is not supported, so this value should always be zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbGetPrintQueues		1.3.6.1.4.1.789.1.7.3.1.2.35
The SMB GET_PRINT_QUEUE request is not supported, so this value should always be zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbNTTransactIoctls		1.3.6.1.4.1.789.1.7.3.1.2.36
The number of SMB NT_TRANSACT_IOCTL requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbNTTransactQuerySecDescs		1.3.6.1.4.1.789.1.7.3.1.2.37
The number of SMB NT_TRANSACT_QUERY_SECURITY_DESC requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbNTTransactSetSecDescs		1.3.6.1.4.1.789.1.7.3.1.2.38
The number of SMB NT_TRANSACT_SET_SECURITY_DESC requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbTrans2CreateDirs		1.3.6.1.4.1.789.1.7.3.1.2.39
The number of SMB TRANS2_CREATE_DIRECTORY requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbNTCancelCNs		1.3.6.1.4.1.789.1.7.3.1.2.40
The number of SMB NT_CANCEL requests against change notifications since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbNTCancelOthers		1.3.6.1.4.1.789.1.7.3.1.2.41
The number of SMB NT_CANCEL requests against operations other than change notifications, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbClosePrintFiles		1.3.6.1.4.1.789.1.7.3.1.4.1
The number of SMB CLOSE_PRINT_FILE requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbCreates		1.3.6.1.4.1.789.1.7.3.1.4.2
The number of SMB CREATE requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbCreateDirs		1.3.6.1.4.1.789.1.7.3.1.4.3
The number of SMB CREATE_DIRECTORY requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbCreateNews		1.3.6.1.4.1.789.1.7.3.1.4.4
The number of SMB CREATE_NEW requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbLockAndReads		1.3.6.1.4.1.789.1.7.3.1.4.5
The number of SMB LOCK_AND_READ requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbLockByteRanges		1.3.6.1.4.1.789.1.7.3.1.4.6
The number of SMB LOCK_BYTE_RANGE requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbOpens		1.3.6.1.4.1.789.1.7.3.1.4.7
The number of SMB OPEN requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbOpenAndXs		1.3.6.1.4.1.789.1.7.3.1.4.8
The number of SMB OPEN_ANDX requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbProcessExits		1.3.6.1.4.1.789.1.7.3.1.4.9
The number of SMB PROCESS_EXIT requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbQueryInfos		1.3.6.1.4.1.789.1.7.3.1.4.10
The number of SMB QUERY_INFORMATION requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbQueryInfo2s		1.3.6.1.4.1.789.1.7.3.1.4.11
The number of SMB QUERY_INFORMATION2 requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbReads		1.3.6.1.4.1.789.1.7.3.1.4.12
The number of SMB READ requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbReadMPXs		1.3.6.1.4.1.789.1.7.3.1.4.13
The SMB READ_MPX request is not supported, so this value should always be zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbReadRaws		1.3.6.1.4.1.789.1.7.3.1.4.14
The number of SMB READ_RAW requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbSearchs		1.3.6.1.4.1.789.1.7.3.1.4.15
The number of SMB SEARCH requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbSetInfos		1.3.6.1.4.1.789.1.7.3.1.4.16
The number of SMB SET_INFORMATION requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbSetInfo2s		1.3.6.1.4.1.789.1.7.3.1.4.17
The number of SMB SET_INFORMATION2 requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbQueryInfoDisks		1.3.6.1.4.1.789.1.7.3.1.4.18
The number of SMB QUERY_INFORMATION_DISK requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbTrans2Open2s		1.3.6.1.4.1.789.1.7.3.1.4.19
The number of SMB TRANS2_OPEN2 requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbTreeConnects		1.3.6.1.4.1.789.1.7.3.1.4.20
The number of SMB TREE_CONNECT requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbUnlockByteRanges		1.3.6.1.4.1.789.1.7.3.1.4.21
The number of SMB UNLOCK_BYTE_RANGE requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbWrites		1.3.6.1.4.1.789.1.7.3.1.4.22
The number of SMB WRITE requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbWriteAndUnlocks		1.3.6.1.4.1.789.1.7.3.1.4.23
The number of SMB WRITE_AND_UNLOCK requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbWriteAndCloses		1.3.6.1.4.1.789.1.7.3.1.4.24
The number of SMB WRITE_AND_CLOSE requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbWriteMPXs		1.3.6.1.4.1.789.1.7.3.1.4.25
The SMB WRITE_MPX request is not supported, so this value should always be zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbWritePrintFiles		1.3.6.1.4.1.789.1.7.3.1.4.26
The SMB WRITE_PRINT_FILE request is not supported, so this value should always be zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

obsSmbWriteRaws		1.3.6.1.4.1.789.1.7.3.1.4.27
The number of SMB WRITE_RAW requests, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smbNegProtPct		1.3.6.1.4.1.789.1.7.3.1.3.1
The number of SMB NEGOTIATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbSessionSetupAndXPct		1.3.6.1.4.1.789.1.7.3.1.3.2
The number of SMB SESSION_SETUP_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbLogoffAndXPct		1.3.6.1.4.1.789.1.7.3.1.3.3
The number of SMB LOGOFF_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbTreeConnectAndXPct		1.3.6.1.4.1.789.1.7.3.1.3.4
The number of SMB TREE_CONNECT_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbTreeDisconnectAndXPct		1.3.6.1.4.1.789.1.7.3.1.3.5
The number of SMB TREE_DISCONNECT_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbTrans2QueryFSInfoPct		1.3.6.1.4.1.789.1.7.3.1.3.6
The number of SMB TRANS2_QUERY_FS_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbEchoPct		1.3.6.1.4.1.789.1.7.3.1.3.7
The number of SMB ECHO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbNTCancelPct		1.3.6.1.4.1.789.1.7.3.1.3.8
The number of SMB NT_CANCEL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbCreateAndXPct		1.3.6.1.4.1.789.1.7.3.1.3.9
The number of SMB NT_CREATE_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbTransactCreatePct		1.3.6.1.4.1.789.1.7.3.1.3.10
The number of SMB NT_TRANSACT_CREATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbCreateTemporaryPct		1.3.6.1.4.1.789.1.7.3.1.3.11
The number of SMB CREATE_TEMPORARY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbReadAndXPct		1.3.6.1.4.1.789.1.7.3.1.3.12
The number of SMB READ_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbWriteAndXPct		1.3.6.1.4.1.789.1.7.3.1.3.13
The number of SMB WRITE_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbLockingAndXPct		1.3.6.1.4.1.789.1.7.3.1.3.14
The number of SMB LOCKING_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbSeekPct		1.3.6.1.4.1.789.1.7.3.1.3.15
The number of SMB SEEK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbFlushPct		1.3.6.1.4.1.789.1.7.3.1.3.16
The number of SMB FLUSH requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbClosePct		1.3.6.1.4.1.789.1.7.3.1.3.17
The number of SMB CLOSE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbDeletePct		1.3.6.1.4.1.789.1.7.3.1.3.18
The number of SMB DELETE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbRenamePct		1.3.6.1.4.1.789.1.7.3.1.3.19
The number of SMB RENAME requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbMovePct		1.3.6.1.4.1.789.1.7.3.1.3.20
The number of SMB MOVE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbCopyPct		1.3.6.1.4.1.789.1.7.3.1.3.21
The number of SMB COPY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbTrans2QueryPathInfoPct		1.3.6.1.4.1.789.1.7.3.1.3.22
The number of SMB TRANS2_QUERY_PATH_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbTrans2QueryFileInfoPct		1.3.6.1.4.1.789.1.7.3.1.3.23
The number of SMB TRANS2_QUERY_FILE_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbTrans2SetPathInfoPct		1.3.6.1.4.1.789.1.7.3.1.3.24
The number of SMB TRANS2_SET_PATH_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbTrans2SetFileInfoPct		1.3.6.1.4.1.789.1.7.3.1.3.25
The number of SMB TRANS2_SET_FILE_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbDeleteDirPct		1.3.6.1.4.1.789.1.7.3.1.3.26
The number of SMB DELETE_DIRECTORY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbCheckDirPct		1.3.6.1.4.1.789.1.7.3.1.3.27
The number of SMB CHECK_DIRECTORY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbTrans2FindFirst2Pct		1.3.6.1.4.1.789.1.7.3.1.3.28
The number of SMB TRANS2_FIND_FIRST2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbTrans2FindNext2Pct		1.3.6.1.4.1.789.1.7.3.1.3.29
The number of SMB TRANS2_FIND_NEXT2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbFindClose2Pct		1.3.6.1.4.1.789.1.7.3.1.3.30
The number of SMB FIND_CLOSE2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbNTTransactNotifyChgPct		1.3.6.1.4.1.789.1.7.3.1.3.31
The number of SMB NT_TRANSACT_NOTIFY_CHANGE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbTrans2GetDFSReferralPct		1.3.6.1.4.1.789.1.7.3.1.3.32
The number of SMB TRANS2_GET_DFS_REFERRAL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbTrans2ReportDFSIncPct		1.3.6.1.4.1.789.1.7.3.1.3.33
The number of SMB TRANS2_REPORT_DFS_INCONSISTENCY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbOpenPrintFilePct		1.3.6.1.4.1.789.1.7.3.1.3.34
The number of SMB OPEN_PRINT_FILE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbGetPrintQueuePct		1.3.6.1.4.1.789.1.7.3.1.3.35
The number of SMB GET_PRINT_QUEUE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbNTTransactIoctlPct		1.3.6.1.4.1.789.1.7.3.1.3.36
The number of SMB NT_TRANSACT_IOCTL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbNTTransactQuerySecDescPct		1.3.6.1.4.1.789.1.7.3.1.3.37
The number of SMB NT_TRANSACT_QUERY_SECURITY_DESC requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbNTTransactSetSecDescPct		1.3.6.1.4.1.789.1.7.3.1.3.38
The number of SMB NT_TRANSACT_SET_SECURITY_DESC requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbTrans2CreateDirPct		1.3.6.1.4.1.789.1.7.3.1.3.39
The number of SMB TRANS2_CREATE_DIRECTORY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbNTCancelCNPct		1.3.6.1.4.1.789.1.7.3.1.3.40
The number of SMB NT_CANCEL requests against change notifications, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

smbNTCancelOtherPct		1.3.6.1.4.1.789.1.7.3.1.3.41
The number of SMB NT_CANCEL requests against calls other than change notifications, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbClosePrintFilePct		1.3.6.1.4.1.789.1.7.3.1.5.1
The number of SMB CLOSE_PRINT_FILE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbCreatePct		1.3.6.1.4.1.789.1.7.3.1.5.2
The number of SMB CREATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbCreateDirPct		1.3.6.1.4.1.789.1.7.3.1.5.3
The number of SMB CREATE_DIRECTORY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbCreateNewPct		1.3.6.1.4.1.789.1.7.3.1.5.4
The number of SMB CREATE_NEW requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbLockAndReadPct		1.3.6.1.4.1.789.1.7.3.1.5.5
The number of SMB LOCK_AND_READ requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbLockByteRangePct		1.3.6.1.4.1.789.1.7.3.1.5.6
The number of SMB LOCK_BYTE_RANGE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbOpenPct		1.3.6.1.4.1.789.1.7.3.1.5.7
The number of SMB OPEN requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbOpenAndXPct		1.3.6.1.4.1.789.1.7.3.1.5.8
The number of SMB OPEN_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbProcessExitPct		1.3.6.1.4.1.789.1.7.3.1.5.9
The number of SMB PROCESS_EXIT requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbQueryInfoPct		1.3.6.1.4.1.789.1.7.3.1.5.10
The number of SMB QUERY_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbQueryInfo2Pct		1.3.6.1.4.1.789.1.7.3.1.5.11
The number of SMB QUERY_INFORMATION2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbReadPct		1.3.6.1.4.1.789.1.7.3.1.5.12
The number of SMB READ requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbReadMPXPct		1.3.6.1.4.1.789.1.7.3.1.5.13
The number of SMB READ_MPX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbReadRawPct		1.3.6.1.4.1.789.1.7.3.1.5.14
The number of SMB READ_RAW requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbSearchPct		1.3.6.1.4.1.789.1.7.3.1.5.15
The number of SMB SEARCH requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbSetInfoPct		1.3.6.1.4.1.789.1.7.3.1.5.16
The number of SMB SET_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbSetInfo2Pct		1.3.6.1.4.1.789.1.7.3.1.5.17
The number of SMB SET_INFORMATION2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbQueryInfoDiskPct		1.3.6.1.4.1.789.1.7.3.1.5.18
The number of SMB QUERY_INFORMATION_DISK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbTrans2Open2Pct		1.3.6.1.4.1.789.1.7.3.1.5.19
The number of SMB TRANS2_OPEN2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbTreeConnectPct		1.3.6.1.4.1.789.1.7.3.1.5.20
The number of SMB TREE_CONNECT requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbUnlockByteRangePct		1.3.6.1.4.1.789.1.7.3.1.5.21
The number of SMB UNLOCK_BYTE_RANGE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbWritePct		1.3.6.1.4.1.789.1.7.3.1.5.22
The number of SMB WRITE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbWriteAndUnlockPct		1.3.6.1.4.1.789.1.7.3.1.5.23
The number of SMB WRITE_AND_UNLOCK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbWriteAndClosePct		1.3.6.1.4.1.789.1.7.3.1.5.24
The number of SMB WRITE_AND_CLOSE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbWriteMPXPct		1.3.6.1.4.1.789.1.7.3.1.5.25
The number of SMB WRITE_MPX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbWritePrintFilePct		1.3.6.1.4.1.789.1.7.3.1.5.26
The number of SMB WRITE_PRINT_FILE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

obsSmbWriteRawPct		1.3.6.1.4.1.789.1.7.3.1.5.27
The number of SMB WRITE_RAW requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

cifsCancelLocks		1.3.6.1.4.1.789.1.7.4.1
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsWaitLocks		1.3.6.1.4.1.789.1.7.4.2
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsCopyToAligns		1.3.6.1.4.1.789.1.7.4.3
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsAlignedSmalls		1.3.6.1.4.1.789.1.7.4.4
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsAlignedLarges		1.3.6.1.4.1.789.1.7.4.5
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsAlignedSmallRels		1.3.6.1.4.1.789.1.7.4.6
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsAlignedLargeRels		1.3.6.1.4.1.789.1.7.4.7
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsMbufWaits		1.3.6.1.4.1.789.1.7.4.8
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsNbtWaits		1.3.6.1.4.1.789.1.7.4.9
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsCwaWaits		1.3.6.1.4.1.789.1.7.4.10
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsMultipleVCs		1.3.6.1.4.1.789.1.7.4.11
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsPDCUpcalls		1.3.6.1.4.1.789.1.7.4.12
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsQueuedWriteRaws		1.3.6.1.4.1.789.1.7.4.13
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsNBTDisconnects		1.3.6.1.4.1.789.1.7.4.14
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsSMBDisconnects		1.3.6.1.4.1.789.1.7.4.15
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsDupDisconnects		1.3.6.1.4.1.789.1.7.4.16
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsOpLkBatchToL2s		1.3.6.1.4.1.789.1.7.4.17
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsOpLkBatchToNones		1.3.6.1.4.1.789.1.7.4.18
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsOpLkL2ToNones		1.3.6.1.4.1.789.1.7.4.19
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsOpLkNoBreakAcks		1.3.6.1.4.1.789.1.7.4.20
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsOpLkIgnoredAcks		1.3.6.1.4.1.789.1.7.4.21
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsOpLkMultiWaiters		1.3.6.1.4.1.789.1.7.4.22
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsSharingErrorRetries		1.3.6.1.4.1.789.1.7.4.23
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsOpLkWaiterTimedOuts		1.3.6.1.4.1.789.1.7.4.24
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsOpLkDelayedBreaks		1.3.6.1.4.1.789.1.7.4.25
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsOpLkEarlyNFSs		1.3.6.1.4.1.789.1.7.4.26
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsOpLkNFSWaiteds		1.3.6.1.4.1.789.1.7.4.27
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cifsMaxNFSBkWaiterCount		1.3.6.1.4.1.789.1.7.4.28
Undocumented
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cifsClearTextPasswd		1.3.6.1.4.1.789.1.7.4.29
This indicates whether the cifs clients are using clear text passwords when authenticating with the filer. If cifsDomainJoined is false and this variable is also false, then the filer is using NT Security from a local user list.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncOptions		1.3.6.1.4.1.789.1.8.1
OBJECT IDENTIFIER

ncInfo		1.3.6.1.4.1.789.1.8.2
OBJECT IDENTIFIER

ncStats		1.3.6.1.4.1.789.1.8.3
OBJECT IDENTIFIER

ncIsEnabled		1.3.6.1.4.1.789.1.8.1.1
Whether Netcache is enabled on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncIsLicensed		1.3.6.1.4.1.789.1.8.1.2
Whether Netcache is licensed on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncDnsOptions		1.3.6.1.4.1.789.1.8.1.3
OBJECT IDENTIFIER

ncDnsIsEnabled		1.3.6.1.4.1.789.1.8.1.3.1
Whether the Domain Name System (DNS) is enabled on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncHttpOptions		1.3.6.1.4.1.789.1.8.1.4
OBJECT IDENTIFIER

ncHttpIsEnabled		1.3.6.1.4.1.789.1.8.1.4.1
Whether HTTP is enabled on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncNntpOptions		1.3.6.1.4.1.789.1.8.1.5
OBJECT IDENTIFIER

ncNntpIsEnabled		1.3.6.1.4.1.789.1.8.1.5.1
Whether NNTP is enabled on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncNntpIsLicensed		1.3.6.1.4.1.789.1.8.1.5.2
Whether NNTP is licensed on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncStreamingOptions		1.3.6.1.4.1.789.1.8.1.6
OBJECT IDENTIFIER

ncStreamingMmsIsEnabled		1.3.6.1.4.1.789.1.8.1.6.1
Whether Microsoft Media Services (MMS) is enabled on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncStreamingMmsIsLicensed		1.3.6.1.4.1.789.1.8.1.6.2
Whether Microsoft Windows Media Service (MMS) is licensed on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncStreamingMmsProIsLicensed		1.3.6.1.4.1.789.1.8.1.6.3
Whether Microsoft Windows Media Service Pro (MMS) is licensed on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncStreamingRtspIsEnabled		1.3.6.1.4.1.789.1.8.1.6.4
Whether the Real Time Streaming Protocol (RTSP) is enabled on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncStreamingQuickTimeIsLicensed		1.3.6.1.4.1.789.1.8.1.6.5
Whether QuickTime is licensed on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncStreamingRealIsLicensed		1.3.6.1.4.1.789.1.8.1.6.6
Whether Real Media streaming is licensed on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncStreamingMmsUltraIsLicensed		1.3.6.1.4.1.789.1.8.1.6.7
Whether Microsoft Windows Media Service Ultra (MMS) is licensed on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncStreamingRealProIsLicensed		1.3.6.1.4.1.789.1.8.1.6.8
Whether Real Media Pro streaming is licensed on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncStreamingRealUltraIsLicensed		1.3.6.1.4.1.789.1.8.1.6.9
Whether Real Media Ultra streaming is licensed on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncIcapOptions		1.3.6.1.4.1.789.1.8.1.7
OBJECT IDENTIFIER

ncIcapIsEnabled		1.3.6.1.4.1.789.1.8.1.7.1
Whether ICAP v0.95 is enabled on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncIcapIsLicensed		1.3.6.1.4.1.789.1.8.1.7.2
Whether ICAP is licensed on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncIcapv1IsEnabled		1.3.6.1.4.1.789.1.8.1.7.3
Whether ICAP v1.0 is enabled on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncGrmOptions		1.3.6.1.4.1.789.1.8.1.8
OBJECT IDENTIFIER

ncGrmServerOptions		1.3.6.1.4.1.789.1.8.1.8.1
OBJECT IDENTIFIER

ncGrmAgentOptions		1.3.6.1.4.1.789.1.8.1.8.2
OBJECT IDENTIFIER

ncGrmServerIsEnabled		1.3.6.1.4.1.789.1.8.1.8.1.1
Whether the Global Request Manager (GRM) Server is enabled on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncGrmServerIsLicensed		1.3.6.1.4.1.789.1.8.1.8.1.2
Whether the Global Request Manager (GRM) Server is licensed on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncGrmAgentIsEnabled		1.3.6.1.4.1.789.1.8.1.8.2.1
Whether the Global Request Manager (GRM) Agent enabled on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncGrmAgentIsLicensed		1.3.6.1.4.1.789.1.8.1.8.2.2
Whether the Global Request Manager (GRM) Agent is licensed on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncCdOptions		1.3.6.1.4.1.789.1.8.1.9
OBJECT IDENTIFIER

ncCdIsEnabled		1.3.6.1.4.1.789.1.8.1.9.1
Whether Content Director is enabled on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncHttpsProxyOptions		1.3.6.1.4.1.789.1.8.1.10
OBJECT IDENTIFIER

ncHttpsProxyIsEnabled		1.3.6.1.4.1.789.1.8.1.10.1
Whether HTTPS is enabled on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncHttpsProxyIsLicensed		1.3.6.1.4.1.789.1.8.1.10.2
Whether HTTPS is licensed on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncCmsOptions		1.3.6.1.4.1.789.1.8.1.11
OBJECT IDENTIFIER

ncCmsIsEnabled		1.3.6.1.4.1.789.1.8.1.11.1
Whether CMS is enabled on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncVersion		1.3.6.1.4.1.789.1.8.2.1
The Netcache version string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ncAdminPort		1.3.6.1.4.1.789.1.8.2.2
Netcache Admin Port number - this is the first in the list of admin ports configured for the NetCache.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accelmonitor		1.3.6.1.4.1.789.1.8.2.3
OBJECT IDENTIFIER

amNumber		1.3.6.1.4.1.789.1.8.2.3.1
The number of entries in the acceleration monitor table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

amMonitor		1.3.6.1.4.1.789.1.8.2.3.2
Variable for user defined SNMP traps to monitor whether there has been a status change of any of the acceleration servers that netcache is probing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	togglea(1), toggleb(2)

amMonitorString		1.3.6.1.4.1.789.1.8.2.3.3
Used in conjunction with amMonitor. This returns a string in format of: 'IP:port status' which reports the status of all the servers netcache is accelerating as of last status change.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

amTable		1.3.6.1.4.1.789.1.8.2.3.4
A list of acceleration server and port entries. The number of entries is given by the value of amNumber.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AmEntry

amEntry		1.3.6.1.4.1.789.1.8.2.3.4.1
An acceleration monitor entry contains: the server IP address, server port and the status.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AmEntry

amIndex		1.3.6.1.4.1.789.1.8.2.3.4.1.1
A unique value for each entry in the acceleration monitor table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

amAddress		1.3.6.1.4.1.789.1.8.2.3.4.1.2
The IP address of the acceleration server the NetCache is monitoring.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

amPort		1.3.6.1.4.1.789.1.8.2.3.4.1.3
The corresponding port on the server that NetCache is monitoring.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

amStatus		1.3.6.1.4.1.789.1.8.2.3.4.1.4
The status of the service running on the server. active - in queue but no probes done yet. up - the server is reachable and responding to probes. down - the server is unreachable. inactive - monitoring is disabled.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), up(2), down(3), inactive(4)

ncLocalConfigChanged		1.3.6.1.4.1.789.1.8.2.4
Whether the local configuration file on NetCache was changed without using DFM configuration management.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncLocalConfigVersion		1.3.6.1.4.1.789.1.8.2.5
The current cache configuration's version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

grmmonitor		1.3.6.1.4.1.789.1.8.2.6
OBJECT IDENTIFIER

grmMonitor		1.3.6.1.4.1.789.1.8.2.6.1
Variable for user defined SNMP traps to monitor whether there has been a status change of any of the GRM agents reporting to this GRM server.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	togglea(1), toggleb(2)

grmMonitorString		1.3.6.1.4.1.789.1.8.2.6.2
Used in conjunction with grmMonitor. This returns a string in format of: 'IP status.' which reports the status of all the GRM agents reporting to this GRM server as of last status change.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

takeoverinfo		1.3.6.1.4.1.789.1.8.2.7
OBJECT IDENTIFIER

takeoverAddrs		1.3.6.1.4.1.789.1.8.2.7.1
Indicates the list of interfaces and their corresponding IP addresses of the partner NetCache that this appliance has taken over.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

takeoverMode		1.3.6.1.4.1.789.1.8.2.7.2
Indicates the current takeover mode of this appliance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), takingover(2), takenover(3), giveback(4)

takeoverStatus		1.3.6.1.4.1.789.1.8.2.7.3
Indicates the current status of the takeover partner of this appliance. up(1) indicates that the takeover partner is reachable. unknown(2) indicates that an unknown error occured. failed(3) indicates that the partner has failed, takeoverAddrs indicates the partner's IP address this appliance has taken over.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), unknown(2), failed(3)

ncObjectsStored		1.3.6.1.4.1.789.1.8.3.1
The total number of objects stored currently.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncBytesToClients		1.3.6.1.4.1.789.1.8.3.2
Total bytes sent to clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncBytesFromClients		1.3.6.1.4.1.789.1.8.3.3
Total bytes received from clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncBytesToServers		1.3.6.1.4.1.789.1.8.3.4
Total bytes sent to servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncBytesFromServers		1.3.6.1.4.1.789.1.8.3.5
Total bytes received from servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttp		1.3.6.1.4.1.789.1.8.3.6
OBJECT IDENTIFIER

ncHttpTotalRequests		1.3.6.1.4.1.789.1.8.3.6.1
Total HTTP requests so far
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpHitRequests		1.3.6.1.4.1.789.1.8.3.6.2
HTTP requests that resulted in hits so far
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpMissRequests		1.3.6.1.4.1.789.1.8.3.6.3
HTTP requests that resulted in misses so far
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpServConns		1.3.6.1.4.1.789.1.8.3.6.4
Number of currently open TCP/IP connections to HTTP servers (active and idle)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpCliConns		1.3.6.1.4.1.789.1.8.3.6.5
Number of currently open TCP/IP connections to HTTP clients (active and idle)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpBWSavings		1.3.6.1.4.1.789.1.8.3.6.6
Bandwidth savings for HTTP requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpObjHitrate		1.3.6.1.4.1.789.1.8.3.6.7
Object Hitrate HTTP requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpRespTimePerByte		1.3.6.1.4.1.789.1.8.3.6.8
Response time in milliseconds per byte for HTTP requests.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpAvgRespTime		1.3.6.1.4.1.789.1.8.3.6.9
Average response time in milliseconds for all HTTP requests.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpAvgHitRespTime		1.3.6.1.4.1.789.1.8.3.6.10
Average response time in milliseconds for HTTP hit requests.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpAvgMissRespTime		1.3.6.1.4.1.789.1.8.3.6.11
Average response time in milliseconds for HTTP miss requests.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpInstAvgRespTime		1.3.6.1.4.1.789.1.8.3.6.12
Average response time in milliseconds for all HTTP requests during the last 60 seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpInstAvgHitRespTime		1.3.6.1.4.1.789.1.8.3.6.13
Average response time in milliseconds for HTTP hit requests during the last 60 seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpInstAvgMissRespTime		1.3.6.1.4.1.789.1.8.3.6.14
Average response time in milliseconds for HTTP miss requests during the last 60 seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpTotalRespTime		1.3.6.1.4.1.789.1.8.3.6.15
Total fetch time in milliseconds for HTTP requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpTotalHitRespTime		1.3.6.1.4.1.789.1.8.3.6.16
Total fetch time in milliseconds for HTTP HIT requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpTotalMissRespTime		1.3.6.1.4.1.789.1.8.3.6.17
Total fetch time in milliseconds for HTTP MISS requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpBytesToClients		1.3.6.1.4.1.789.1.8.3.6.18
Total HTTP bytes sent to clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpBytesFromClients		1.3.6.1.4.1.789.1.8.3.6.19
Total HTTP bytes received from clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpBytesToServers		1.3.6.1.4.1.789.1.8.3.6.20
Total HTTP bytes sent to servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpBytesFromServers		1.3.6.1.4.1.789.1.8.3.6.21
Total HTTP bytes received from servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpHighTotalRespTimes		1.3.6.1.4.1.789.1.8.3.6.22
Total fetch time in milliseconds for HTTP requests. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpLowTotalRespTimes		1.3.6.1.4.1.789.1.8.3.6.23
Total fetch time in milliseconds for HTTP requests. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpHighTotalHitRespTimes		1.3.6.1.4.1.789.1.8.3.6.24
Total fetch time in milliseconds for HTTP HIT requests. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpLowTotalHitRespTimes		1.3.6.1.4.1.789.1.8.3.6.25
Total fetch time in milliseconds for HTTP HIT requests. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpHighTotalMissRespTimes		1.3.6.1.4.1.789.1.8.3.6.26
Total fetch time in milliseconds for HTTP MISS requests. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpLowTotalMissRespTimes		1.3.6.1.4.1.789.1.8.3.6.27
Total fetch time in milliseconds for HTTP MISS requests. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpReqRate		1.3.6.1.4.1.789.1.8.3.6.28
Request Rate for HTTP requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpObjHitRateLast1Min		1.3.6.1.4.1.789.1.8.3.6.29
HTTP object hit rate in the last 1 minute.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpObjHitRateLast5Min		1.3.6.1.4.1.789.1.8.3.6.30
HTTP object hit rate in the last 5 minutes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpByteHitRateLast1Min		1.3.6.1.4.1.789.1.8.3.6.31
HTTP byte hit rate in the last 1 minute.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpByteHitRateLast5Min		1.3.6.1.4.1.789.1.8.3.6.32
HTTP byte hit rate in the last 5 minutes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpBWSavingsLast1Min		1.3.6.1.4.1.789.1.8.3.6.33
Bandwidth savings for HTTP requests in the last 1 minute
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpBWSavingsLast5Min		1.3.6.1.4.1.789.1.8.3.6.34
Bandwidth savings for HTTP requests in the last 5 minutes
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpActiveServConns		1.3.6.1.4.1.789.1.8.3.6.35
Number of currently active TCP/IP connections to HTTP servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpActiveCliConns		1.3.6.1.4.1.789.1.8.3.6.36
Number of currently active TCP/IP connections to HTTP clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncHttpAccelTable		1.3.6.1.4.1.789.1.8.3.6.37
Number of kilobytes sent to and recieved from the client side per acceleration rule
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcHttpAccelEntry

ncHttpAccelEntry		1.3.6.1.4.1.789.1.8.3.6.37.1
Each entry contains the number of kilobytes sent and received to/from the clients side per acceleration rule
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcHttpAccelEntry

ncHttpAccelIndex		1.3.6.1.4.1.789.1.8.3.6.37.1.1
A unique value for each entry in the http acceleration stats table
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..513

ncHttpAccelKbytesFromClient		1.3.6.1.4.1.789.1.8.3.6.37.1.2
The total number of kilobytes received from the client for this acceleration rule
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpAccelKbytesToClient		1.3.6.1.4.1.789.1.8.3.6.37.1.3
The total number of kilobytes sent to the client for this acceleration rule
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpAccelHits		1.3.6.1.4.1.789.1.8.3.6.37.1.4
The number of times this acceleration rule has been hit
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpsAccelTable		1.3.6.1.4.1.789.1.8.3.6.38
Number of kilobytes sent to and recieved from the client side per acceleration rule
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcHttpsAccelEntry

ncHttpsAccelEntry		1.3.6.1.4.1.789.1.8.3.6.38.1
Each entry contains the number of kilobytes sent and received to/from the clients side per acceleration rule
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcHttpsAccelEntry

ncHttpsAccelIndex		1.3.6.1.4.1.789.1.8.3.6.38.1.1
A unique value for each entry in the http acceleration stats table
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..513

ncHttpsAccelKbytesFromClient		1.3.6.1.4.1.789.1.8.3.6.38.1.2
The total number of kilobytes received from the client for this acceleration rule
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpsAccelKbytesToClient		1.3.6.1.4.1.789.1.8.3.6.38.1.3
The total number of kilobytes sent to the client for this acceleration rule
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncHttpsAccelHits		1.3.6.1.4.1.789.1.8.3.6.38.1.4
The number of times this acceleration rule has been hit
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncNntp		1.3.6.1.4.1.789.1.8.3.7
OBJECT IDENTIFIER

ncNntpTotalRequests		1.3.6.1.4.1.789.1.8.3.7.1
NNTP total requests so far
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncNntpCacheableRequests		1.3.6.1.4.1.789.1.8.3.7.2
NNTP requests that were cacheable
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncNntpProxyRequests		1.3.6.1.4.1.789.1.8.3.7.3
NNTP requests that were non-cacheable
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncNntpServConns		1.3.6.1.4.1.789.1.8.3.7.4
Number of currently open TCP/IP connections to NNTP servers (active and idle)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncNntpCliConns		1.3.6.1.4.1.789.1.8.3.7.5
Number of currently open TCP/IP connections to NNTP clients (active and idle)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncNntpBWSavings		1.3.6.1.4.1.789.1.8.3.7.6
Bandwidth savings for NNTP requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncNntpRespTimePerByte		1.3.6.1.4.1.789.1.8.3.7.7
Response time per byte for NNTP requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncNntpBytesToClients		1.3.6.1.4.1.789.1.8.3.7.8
Total NNTP bytes sent to clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncNntpBytesFromClients		1.3.6.1.4.1.789.1.8.3.7.9
Total NNTP bytes received from clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncNntpBytesToServers		1.3.6.1.4.1.789.1.8.3.7.10
Total NNTP bytes sent to servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncNntpBytesFromServers		1.3.6.1.4.1.789.1.8.3.7.11
Total NNTP bytes received from servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncNntpObjHitrate		1.3.6.1.4.1.789.1.8.3.7.12
Object Hitrate of NNTP requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncNntpActiveServConns		1.3.6.1.4.1.789.1.8.3.7.13
Number of currently active TCP/IP connections to NNTP servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncNntpActiveCliConns		1.3.6.1.4.1.789.1.8.3.7.14
Number of currently active TCP/IP connections to NNTP clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncFtp		1.3.6.1.4.1.789.1.8.3.8
OBJECT IDENTIFIER

ncFtpTotalRequests		1.3.6.1.4.1.789.1.8.3.8.1
FTP total requests so far
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncFtpHitRequests		1.3.6.1.4.1.789.1.8.3.8.2
FTP requests that resulted in hits so far
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncFtpMissRequests		1.3.6.1.4.1.789.1.8.3.8.3
FTP requests that resulted in misses so far
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncFtpServConns		1.3.6.1.4.1.789.1.8.3.8.4
Number of currently open TCP/IP connections to FTP servers (active and idle)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncFtpCliConns		1.3.6.1.4.1.789.1.8.3.8.5
Number of currently open TCP/IP connections to FTP clients (active and idle)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncFtpBWSavings		1.3.6.1.4.1.789.1.8.3.8.6
Bandwidth savings for FTP requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncFtpRespTimePerByte		1.3.6.1.4.1.789.1.8.3.8.7
Response time per byte for FTP requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncFtpBytesToClients		1.3.6.1.4.1.789.1.8.3.8.8
Total FTP bytes sent to clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncFtpBytesFromClients		1.3.6.1.4.1.789.1.8.3.8.9
Total FTP bytes received from clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncFtpBytesToServers		1.3.6.1.4.1.789.1.8.3.8.10
Total FTP bytes sent to servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncFtpBytesFromServers		1.3.6.1.4.1.789.1.8.3.8.11
Total FTP bytes received from servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncFtpObjHitrate		1.3.6.1.4.1.789.1.8.3.8.12
Object Hitrate of FTP requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncFtpActiveServConns		1.3.6.1.4.1.789.1.8.3.8.13
Number of currently active TCP/IP connections to FTP servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncFtpActiveCliConns		1.3.6.1.4.1.789.1.8.3.8.14
Number of currently active TCP/IP connections to FTP clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncStreaming		1.3.6.1.4.1.789.1.8.3.9
OBJECT IDENTIFIER

ncStreamingServConns		1.3.6.1.4.1.789.1.8.3.9.1
Number of currently open TCP/IP connections to streaming servers (active and idle)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncStreamingCliConns		1.3.6.1.4.1.789.1.8.3.9.2
Number of currently open TCP/IP connections to streaming clients (active and idle)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncStreamingBWSavings		1.3.6.1.4.1.789.1.8.3.9.3
Bandwidth savings for all streaming requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncStreamingRespTimePerByte		1.3.6.1.4.1.789.1.8.3.9.4
Response time per byte for all streaming requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncStreamingHitRequests		1.3.6.1.4.1.789.1.8.3.9.5
STREAMING requests that resulted in hits so far
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingMissRequests		1.3.6.1.4.1.789.1.8.3.9.6
STREAMING requests that resulted in misses so far
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingTotalRequests		1.3.6.1.4.1.789.1.8.3.9.7
STREAMING total requests so far
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingLiveBytesToClients		1.3.6.1.4.1.789.1.8.3.9.8
Total Streaming Live bytes sent to clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingLiveBytesFromClients		1.3.6.1.4.1.789.1.8.3.9.9
Total Streaming Live bytes received from clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingLiveBytesToServers		1.3.6.1.4.1.789.1.8.3.9.10
Total Streaming Live bytes sent to servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingLiveBytesFromServers		1.3.6.1.4.1.789.1.8.3.9.11
Total Streaming Live bytes received from servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingProxyBytesToClients		1.3.6.1.4.1.789.1.8.3.9.12
Total Streaming Proxy bytes sent to clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingProxyBytesFromClients		1.3.6.1.4.1.789.1.8.3.9.13
Total Streaming Proxy bytes received from clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingProxyBytesToServers		1.3.6.1.4.1.789.1.8.3.9.14
Total Streaming Proxy bytes sent to servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingProxyBytesFromServers		1.3.6.1.4.1.789.1.8.3.9.15
Total Streaming Proxy bytes received from servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingOndemandBytesToClients		1.3.6.1.4.1.789.1.8.3.9.16
Total Streaming Ondemand bytes sent to clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingOndemandBytesFromClients		1.3.6.1.4.1.789.1.8.3.9.17
Total Streaming Ondemand bytes received from clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingOndemandBytesToServers		1.3.6.1.4.1.789.1.8.3.9.18
Total Streaming Ondemand bytes sent to servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingOndemandBytesFromServers		1.3.6.1.4.1.789.1.8.3.9.19
Total Streaming Ondemand bytes received from servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingObjHitrate		1.3.6.1.4.1.789.1.8.3.9.20
Object Hitrate of Streaming requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncStreamingRealBytesToClients		1.3.6.1.4.1.789.1.8.3.9.21
Total Streaming Real bytes sent to clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingRealBytesFromClients		1.3.6.1.4.1.789.1.8.3.9.22
Total Streaming Real bytes received from clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingRealBytesToServers		1.3.6.1.4.1.789.1.8.3.9.23
Total Streaming Real bytes sent to servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingRealBytesFromServers		1.3.6.1.4.1.789.1.8.3.9.24
Total Streaming Real bytes received from servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingMmsBytesToClients		1.3.6.1.4.1.789.1.8.3.9.25
Total Streaming Mms bytes sent to clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingMmsBytesFromClients		1.3.6.1.4.1.789.1.8.3.9.26
Total Streaming Mms bytes received from clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingMmsBytesToServers		1.3.6.1.4.1.789.1.8.3.9.27
Total Streaming Mms bytes sent to servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingMmsBytesFromServers		1.3.6.1.4.1.789.1.8.3.9.28
Total Streaming Mms bytes received from servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingQuickTimeBytesToClients		1.3.6.1.4.1.789.1.8.3.9.29
Total Streaming QuickTime bytes sent to clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingQuickTimeBytesFromClients		1.3.6.1.4.1.789.1.8.3.9.30
Total Streaming QuickTime bytes received from clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingQuickTimeBytesToServers		1.3.6.1.4.1.789.1.8.3.9.31
Total Streaming QuickTime bytes sent to servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingQuickTimeBytesFromServers		1.3.6.1.4.1.789.1.8.3.9.32
Total Streaming QuickTime bytes received from servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingLiveBWSavings		1.3.6.1.4.1.789.1.8.3.9.33
Bandwidth savings for all Live streaming requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncStreamingOndemandBWSavings		1.3.6.1.4.1.789.1.8.3.9.34
Bandwidth savings for all VOD streaming requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncStreamingRealBWSavings		1.3.6.1.4.1.789.1.8.3.9.35
Bandwidth savings for all Real streaming requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncStreamingMmsBWSavings		1.3.6.1.4.1.789.1.8.3.9.36
Bandwidth savings for all MMS streaming requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncStreamingQuickTimeBWSavings		1.3.6.1.4.1.789.1.8.3.9.37
Bandwidth savings for all QuickTime streaming requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncStreamingActiveServConns		1.3.6.1.4.1.789.1.8.3.9.38
Number of currently active TCP/IP connections to streaming servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncStreamingActiveCliConns		1.3.6.1.4.1.789.1.8.3.9.39
Number of currently active TCP/IP connections to streaming clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncStreamingRtspWMBytesToClients		1.3.6.1.4.1.789.1.8.3.9.40
Total Streaming Windows Media RTSP bytes sent to clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingRtspWMBytesFromClients		1.3.6.1.4.1.789.1.8.3.9.41
Total Streaming Windows Media RTSP bytes received from clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingRtspWMBytesToServers		1.3.6.1.4.1.789.1.8.3.9.42
Total Streaming Windows Media RTSP bytes sent to servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingRtspWMBytesFromServers		1.3.6.1.4.1.789.1.8.3.9.43
Total Streaming Windows Media RTSP bytes received from servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingRtspWMBWSavings		1.3.6.1.4.1.789.1.8.3.9.44
Bandwidth savings for all Windows Media RTSP streaming requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncStreamingAccelTable		1.3.6.1.4.1.789.1.8.3.9.45
Number of kilobytes sent to and recieved from the client side per acceleration rule
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcStreamingAccelEntry

ncStreamingAccelEntry		1.3.6.1.4.1.789.1.8.3.9.45.1
Each entry contains the number of kilobytes sent and received to/from the clients side per acceleration rule
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcStreamingAccelEntry

ncStreamingAccelIndex		1.3.6.1.4.1.789.1.8.3.9.45.1.1
A unique value for each entry in the streaming acceleration stats table
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..513

ncStreamingAccelKbytesFromClient		1.3.6.1.4.1.789.1.8.3.9.45.1.2
The total number of kilobytes received from the client for this acceleration rule
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingAccelKbytesToClient		1.3.6.1.4.1.789.1.8.3.9.45.1.3
The total number of kilobytes sent to the client for this acceleration rule
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingAccelHits		1.3.6.1.4.1.789.1.8.3.9.45.1.4
The number of times this acceleration rule has been hit
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncStreamingClientsDelayedSW		1.3.6.1.4.1.789.1.8.3.9.46
Number of clients delayed because of a Bandwidth Limit
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncTotalBWSavings		1.3.6.1.4.1.789.1.8.3.10
Total Bandwidth savings for HTTP, FTP, NNTP, and Streaming protocols
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncDns		1.3.6.1.4.1.789.1.8.3.11
OBJECT IDENTIFIER

ncDnsRequestsReceived		1.3.6.1.4.1.789.1.8.3.11.1
Total DNS requests received from clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncDnsCacheHits		1.3.6.1.4.1.789.1.8.3.11.2
Hits on the DNS cache. This includes hits for DNS lookups generated by NetCache internally
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncDnsCacheMisses		1.3.6.1.4.1.789.1.8.3.11.3
Misses on the DNS cache. This includes misses for DNS lookups generated by NetCache internally
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncDnsSuccessfulForwardLookups		1.3.6.1.4.1.789.1.8.3.11.4
Forward DNS lookups that are successful
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncDnsFailedForwardLookups		1.3.6.1.4.1.789.1.8.3.11.5
Forward DNS lookups that failed
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncDnsPendingForwardLookups		1.3.6.1.4.1.789.1.8.3.11.6
Forward DNS lookups that are in progress
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncDnsSuccessfulReverseLookups		1.3.6.1.4.1.789.1.8.3.11.7
Reverse DNS lookups that are successful
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncDnsFailedReverseLookups		1.3.6.1.4.1.789.1.8.3.11.8
Reverse DNS lookups that failed
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncDnsPendingReverseLookups		1.3.6.1.4.1.789.1.8.3.11.9
Reverse DNS lookups that are in progress
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncDnsIres		1.3.6.1.4.1.789.1.8.3.11.10
OBJECT IDENTIFIER

ncDnsIresIsEnabled		1.3.6.1.4.1.789.1.8.3.11.10.1
Has Full Service Resolver been enabled
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncDnsIresIsInitialised		1.3.6.1.4.1.789.1.8.3.11.10.2
Has Full Service Resolver initalised
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncDnsIresForwardLookups		1.3.6.1.4.1.789.1.8.3.11.10.3
Full Service Resolver's Forward Lookups
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncDnsIresPendingForwardLookups		1.3.6.1.4.1.789.1.8.3.11.10.4
Full Service Resolver's Pending Forward Lookups
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncDnsIresReverseLookups		1.3.6.1.4.1.789.1.8.3.11.10.5
Full Service Resolver's Reverse Lookups
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncDnsIresPendingReverseLookups		1.3.6.1.4.1.789.1.8.3.11.10.6
Full Service Resolver's Pending Reverse Lookups
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ncAuth		1.3.6.1.4.1.789.1.8.3.12
OBJECT IDENTIFIER

ncNtlm		1.3.6.1.4.1.789.1.8.3.12.1
OBJECT IDENTIFIER

ncNtlmPossibleProblem		1.3.6.1.4.1.789.1.8.3.12.1.1
Whether a possible ntlm problem is detected in the appliance's domain environment.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ncRM		1.3.6.1.4.1.789.1.8.3.13
OBJECT IDENTIFIER

ncRMMem		1.3.6.1.4.1.789.1.8.3.13.1
OBJECT IDENTIFIER

ncRMMemTotal		1.3.6.1.4.1.789.1.8.3.13.1.1
Total memory in kilobytes available for allocations after boot. It does not imply the total system memory.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncRMMemFree		1.3.6.1.4.1.789.1.8.3.13.1.2
Current free memory in kilobytes available for allocations.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

snapmirrorOn		1.3.6.1.4.1.789.1.9.1
Indicates whether snapmirror has been turned on or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

snapmirrorActiveRestoreCount		1.3.6.1.4.1.789.1.9.2
Number of active SnapMirror restores.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

snapmirrorScheduledRestoreCount		1.3.6.1.4.1.789.1.9.3
Number of scheduled SnapMirror restores.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

snapmirrorBackupNumber		1.3.6.1.4.1.789.1.9.4
Number of active SnapMirror backups.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

snapmirrorBackupSuccesses		1.3.6.1.4.1.789.1.9.5
Number of SnapMirror backups which completed. Reset on reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorRestoreSuccesses		1.3.6.1.4.1.789.1.9.6
Number of SnapMirror restores which completed. Reset on reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorBackupAborts		1.3.6.1.4.1.789.1.9.7
Number of SnapMirror backup transfers which have aborted. Reset on reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorRestoreRestartAborts		1.3.6.1.4.1.789.1.9.8
Number of SnapMirror restore temporary aborts. Reset on reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorRestoreWaitAborts		1.3.6.1.4.1.789.1.9.9
Number of SnapMirror restore permanent aborts. Reset on reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorWrittenBytes		1.3.6.1.4.1.789.1.9.10
Number of Megabytes written by SnapMirror. Reset on reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorReadBytes		1.3.6.1.4.1.789.1.9.11
Number of Megabytes read by SnapMirror. Reset on reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorActiveDstNumber		1.3.6.1.4.1.789.1.9.12
Number of active SnapMirror destination.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

snapmirrorActiveSrcNumber		1.3.6.1.4.1.789.1.9.13
Number of active SnapMirror Source.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

snapmirrorFilerTotalDstSuccesses		1.3.6.1.4.1.789.1.9.14
Total number of successful snapmirror transfers to the destination. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorFilerTotalSrcSuccesses		1.3.6.1.4.1.789.1.9.15
Total number of successful snapmirror transfers from the source. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorFilerTotalSrcFailures		1.3.6.1.4.1.789.1.9.16
Total number of failed SnapMirror transfers on the source. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorFilerTotalDstFailures		1.3.6.1.4.1.789.1.9.17
Total number of failed SnapMirror transfers on the destination. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorFilerTotalDstDeferments		1.3.6.1.4.1.789.1.9.18
Total number of deferred snapmirror transfer on the destination. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorIsLicensed		1.3.6.1.4.1.789.1.9.19
Whether the snapmirror is licensed on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

snapmirrorStatusTable		1.3.6.1.4.1.789.1.9.20
provide a list of snapmirror status.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SnapmirrorStatusEntry

snapmirrorStatusEntry		1.3.6.1.4.1.789.1.9.20.1
Provide a report of current status of snapmirror.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SnapmirrorStatusEntry

snapmirrorIndex		1.3.6.1.4.1.789.1.9.20.1.1
Index into the snapmirror status table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

snapmirrorSrc		1.3.6.1.4.1.789.1.9.20.1.2
Source of the snapmirror. : or :/vol/
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

snapmirrorDst		1.3.6.1.4.1.789.1.9.20.1.3
Destination of the snapmirror. : or :/vol/
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

snapmirrorStatus		1.3.6.1.4.1.789.1.9.20.1.4
Current transfer status of the snapmirror.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), transferring(2), pending(3), aborting(4), migrating(5), quiescing(6), resyncing(7), waiting(8), syncing(9), in-sync(10)

snapmirrorState		1.3.6.1.4.1.789.1.9.20.1.5
Current state of the snapmirror.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	uninitialized(1), snapmirrored(2), broken-off(3), quiesced(4), source(5), unknown(6)

snapmirrorLag		1.3.6.1.4.1.789.1.9.20.1.6
How far behind from the source the destination is.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

snapmirrorTotalSuccesses		1.3.6.1.4.1.789.1.9.20.1.7
Total number of successful transfer since the snapmirror is initialized. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorTotalRestartSuccesses		1.3.6.1.4.1.789.1.9.20.1.8
Total number of successful restarted transfer since the snapmirror is initialized. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorTotalFailures		1.3.6.1.4.1.789.1.9.20.1.9
Total number of failed or aborted transfer since the snapmirror is initialized. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorTotalDeferments		1.3.6.1.4.1.789.1.9.20.1.10
Total number of deferment since the snapmirror is initialized. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorTotalTransMBs		1.3.6.1.4.1.789.1.9.20.1.11
Total transfer size in MB for the snapmirror. Reset on reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorTotalTransTimeSeconds		1.3.6.1.4.1.789.1.9.20.1.12
Total number of seconds spent in successful transfer for the snapmirror. Reset on reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorThrottleValue		1.3.6.1.4.1.789.1.9.20.1.13
Current throttle value for the snapmirror.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

snapmirrorMirrorTimestamp		1.3.6.1.4.1.789.1.9.20.1.14
Timestamp of the last snapshot successfully transferred from the source to the destination.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

snapmirrorBaseSnapshot		1.3.6.1.4.1.789.1.9.20.1.15
The name of the current base snapshot for the snapmirror.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

snapmirrorLastTransType		1.3.6.1.4.1.789.1.9.20.1.16
The type of the previous successful transfer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

snapmirrorLastTransMBs		1.3.6.1.4.1.789.1.9.20.1.17
Last successful transfer size in MB for the snapmirror.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorLastTransTimeSeconds		1.3.6.1.4.1.789.1.9.20.1.18
Duration of last successful transfer in seconds for the snapmirror.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorSchedule		1.3.6.1.4.1.789.1.9.20.1.19
Update schedule for the snapmirror in conf file format.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

snapmirrorScheduleDesc		1.3.6.1.4.1.789.1.9.20.1.20
Description of the update schedule for the snapmirror.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

snapmirrorArguments		1.3.6.1.4.1.789.1.9.20.1.21
Arguments for the snapmirror in conf file format.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

snapmirrorSyncToAsync		1.3.6.1.4.1.789.1.9.20.1.22
The number of times changing from sync mode to async mode since the snapmirror is initialized. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

snapmirrorConnTable		1.3.6.1.4.1.789.1.9.21
Provide a list of snapmirror connection definitions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SnapmirrorConnEntry

snapmirrorConnEntry		1.3.6.1.4.1.789.1.9.21.1
Provide a report of a defined multipath connection.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SnapmirrorConnEntry

snapmirrorConnIndex		1.3.6.1.4.1.789.1.9.21.1.1
Index into the snapmirror multipath connection table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

snapmirrorConnName		1.3.6.1.4.1.789.1.9.21.1.2
The name of the snapmirror multipath connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

snapmirrorConnType		1.3.6.1.4.1.789.1.9.21.1.3
The type of the snapmirror multipath connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	multi(1), failover(2)

snapmirrorConnSrc1		1.3.6.1.4.1.789.1.9.21.1.4
The name of the source for the first path.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

snapmirrorConnDst1		1.3.6.1.4.1.789.1.9.21.1.5
The name of the destination for the first path.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

snapmirrorConnSrc2		1.3.6.1.4.1.789.1.9.21.1.6
The name of the source for the second path.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

snapmirrorConnDst2		1.3.6.1.4.1.789.1.9.21.1.7
The name of the destination for the second path.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

svOn		1.3.6.1.4.1.789.1.19.1
Indicates whether snapvault has been turned on or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

svSystemActiveDstNumber		1.3.6.1.4.1.789.1.19.2
Number of active snapvault destionations.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

svSystemActiveSrcNumber		1.3.6.1.4.1.789.1.19.3
Number of active snapvault sources.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

svSystemTotalPrimarySuccesses		1.3.6.1.4.1.789.1.19.4
Total number of successful snapvault transfers from the snapvault primary. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

svSystemTotalSecondarySuccesses		1.3.6.1.4.1.789.1.19.5
Total number of successful snapvault transfers to the snapvault secondary. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

svSystemTotalPrimaryFailures		1.3.6.1.4.1.789.1.19.6
Total number of failed snapvault transfers on the snapvault primary. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

svSystemTotalSecondaryFailures		1.3.6.1.4.1.789.1.19.7
Total number of failed snapvault transfers on the snapvault secondary. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

svSystemTotalSecondaryDeferments		1.3.6.1.4.1.789.1.19.8
Total number of deferred snapvault transfers on the snapvault secondary. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

svPrimaryIsLicensed		1.3.6.1.4.1.789.1.19.9
Whether the snapvault_client(primary) is licensed on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

svSecondaryIsLicensed		1.3.6.1.4.1.789.1.19.10
Whether the snapvault_server(secondary) is licensed on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

snapvaultStatusTable		1.3.6.1.4.1.789.1.19.11
provide a list of snapvault status.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SnapvaultStatusEntry

snapvaultStatusEntry		1.3.6.1.4.1.789.1.19.11.1
Provide a report of current status of snapvault.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SnapvaultStatusEntry

svIndex		1.3.6.1.4.1.789.1.19.11.1.1
Index into the snapvault status table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

svSrc		1.3.6.1.4.1.789.1.19.11.1.2
Source of the snapvault relationship. :/vol/
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

svDst		1.3.6.1.4.1.789.1.19.11.1.3
Destionation of the snapvault relationship. :/vol/
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

svStatus		1.3.6.1.4.1.789.1.19.11.1.4
Current transfer status of the snapvault relationship.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), transferring(2), pending(3), aborting(4), quiescing(6), resyncing(7), paused(12)

svState		1.3.6.1.4.1.789.1.19.11.1.5
Current state of the snapvault relationship.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	uninitialized(1), snapvaulted(2), broken-off(3), quiesced(4), source(5), unknown(6), restoring(7)

svLag		1.3.6.1.4.1.789.1.19.11.1.6
How far behind from the source the destination is.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

svTotalSuccesses		1.3.6.1.4.1.789.1.19.11.1.7
Total number of successful transfer since the snapvault relationship was established. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

svTotalRestartSuccesses		1.3.6.1.4.1.789.1.19.11.1.8
Total number of successful restarted transfer since the snapvault relationship was established. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

svTotalFailures		1.3.6.1.4.1.789.1.19.11.1.9
Total number of failed or aborted transfer since the snapvault relationship was established. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

svTotalDeferments		1.3.6.1.4.1.789.1.19.11.1.10
Total number of deferment since the snapvault relationship was established. Persistent across reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

svTotalTransMBs		1.3.6.1.4.1.789.1.19.11.1.11
Total transfer size in MB for the snapvault. Reset on reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

svTotalTransTimeSeconds		1.3.6.1.4.1.789.1.19.11.1.12
Total number of seconds spent in successful transfer for the snapvault relationship. Reset on reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

svThrottleValue		1.3.6.1.4.1.789.1.19.11.1.13
Current throttle value for the snapvault relationship.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

svSrcSnapshotTime		1.3.6.1.4.1.789.1.19.11.1.14
Time when the source snapshot was created. The time in seconds since January 1, 1970. The source snapshot here is the last snapshot successfully transferred from the source to the destination.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

svBaseSnapshot		1.3.6.1.4.1.789.1.19.11.1.15
The name of the current base snapshot for the snapvault relationship.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

svLastTransType		1.3.6.1.4.1.789.1.19.11.1.16
The type of the previous successful transfer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

svLastTransMBs		1.3.6.1.4.1.789.1.19.11.1.17
Last successful transfer size in MB for the snapvault relationship.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

svLastTransTimeSeconds		1.3.6.1.4.1.789.1.19.11.1.18
Duration of last successful transfer in seconds for the snapvault relationship.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

snapvaultHostTable		1.3.6.1.4.1.789.1.19.12
Provide a list of remote snapvault hosts.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SnapvaultHostEntry

snapvaultHostEntry		1.3.6.1.4.1.789.1.19.12.1
Provide snapvault statistics for a remote host which has one or more current established relationships with the local snapvault system.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SnapvaultHostEntry

svHostIndex		1.3.6.1.4.1.789.1.19.12.1.1
Index into the snapvault remote host table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

svHostName		1.3.6.1.4.1.789.1.19.12.1.2
The name of the remote snapvault host.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

svHostType		1.3.6.1.4.1.789.1.19.12.1.3
The type of the remote snapvault host.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	primary(1), secondary(2)

svHostTotalSuccesses		1.3.6.1.4.1.789.1.19.12.1.4
Total number of successful snapvault transfers for all current established relationships between the local snapvault system and the given remote host.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

svHostTotalFailures		1.3.6.1.4.1.789.1.19.12.1.5
Total number of failed snapvault transfers for all current established relationships between the local snapvault system and the given remote host.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

svHostTotalDeferments		1.3.6.1.4.1.789.1.19.12.1.6
Total number of deferred snapvault transfers for all current established relationships between the local snapvault system and the given remote host. 0 for snapvault client host.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

snapvaultSchedTable		1.3.6.1.4.1.789.1.19.13
Provide a list of snapvault schedules.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SnapvaultSchedEntry

snapvaultSchedEntry		1.3.6.1.4.1.789.1.19.13.1
Provide a report of schedules of snapvault.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SnapvaultSchedEntry

svSchedIndex		1.3.6.1.4.1.789.1.19.13.1.1
Index into the snapvault schedule table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

svSchedVolume		1.3.6.1.4.1.789.1.19.13.1.2
The name of the volume on the snapvault for the snapvault schedule. This does not have a /vol/ prefix.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

svSchedSnapshot		1.3.6.1.4.1.789.1.19.13.1.3
The name of the snapshot for the snapvault schedule.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

svSchedStatus		1.3.6.1.4.1.789.1.19.13.1.4
Current status of the snapvault schedule.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), queued(2), active(3), aborting(4)

svSchedType		1.3.6.1.4.1.789.1.19.13.1.5
The type of the snapvault schedule.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	undef(1), xfer(2), create(3)

svSchedSchedule		1.3.6.1.4.1.789.1.19.13.1.6
The update schedule of the snapvault.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

svDrPrimaryIsLicensed		1.3.6.1.4.1.789.1.19.14
Whether the snapvault disaster recovery primary is licensed on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

ndmpOn		1.3.6.1.4.1.789.1.10.1
Indicates whether ndmpd has been turned on or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

ndmpSessionOpened		1.3.6.1.4.1.789.1.10.2
Total number of ndmpd sessions currently opened. Sessions may be running backups, restores or neither.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ndmpBackupActive		1.3.6.1.4.1.789.1.10.3
Number of ndmpd backups currently active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ndmpRestoreActive		1.3.6.1.4.1.789.1.10.4
Number of ndmpd restores currently active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ndmpTapeActive		1.3.6.1.4.1.789.1.10.5
Number of tape drives currently active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ndmpBackupSuccesses		1.3.6.1.4.1.789.1.10.6
Number of ndmpd backups that succeeded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ndmpRestoreSuccesses		1.3.6.1.4.1.789.1.10.7
Number of ndmpd restores that succeeded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ndmpBackupFailures		1.3.6.1.4.1.789.1.10.8
Number of ndmpd backups that failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ndmpRestoreFailures		1.3.6.1.4.1.789.1.10.9
Number of ndmpd restores that failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ndmpBackupFailureReason		1.3.6.1.4.1.789.1.10.10
When the ndmpBackupFailures value is non-zero, this string describes the reason for the most recent backup failure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ndmpRestoreFailureReason		1.3.6.1.4.1.789.1.10.11
When the ndmpRestoreFailures value is non-zero, this string describes the reason for the most recent restore failure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ftpdOn		1.3.6.1.4.1.789.1.20.1
Indicates whether ftpd has been turned on or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

ftpdCurrentConns		1.3.6.1.4.1.789.1.20.2
Number of currently open TCP/IP connections to ftp daemon (active and idle)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ftpdMaxConns		1.3.6.1.4.1.789.1.20.3
Number of maximum simultaneous TCP/IP connections to ftp daemon
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ftpdTotalConns		1.3.6.1.4.1.789.1.20.4
Number of total TCP/IP connections to ftp daemon
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

fabricInstances		1.3.6.1.4.1.789.1.11.1
The number of distinct fabrics present.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

fabricTable		1.3.6.1.4.1.789.1.11.2
Provide a list of fabrics.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		FabricEntry

fabricEntry		1.3.6.1.4.1.789.1.11.2.1
Provide a report of current configuration and status of fabrics.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	FabricEntry

fabricIndex		1.3.6.1.4.1.789.1.11.2.1.1
A number that identifies this fabric entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

fabricStatus		1.3.6.1.4.1.789.1.11.2.1.2
This indicates the overall status of the SAN fabric(s).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), faulty(2), unknown(3)

fabricStatusMessage		1.3.6.1.4.1.789.1.11.2.1.3
A string describing the fabric status, including a description of the condition (if any) that caused the status to be anything other than ok(3).
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

fabricName		1.3.6.1.4.1.789.1.11.2.1.4
This is the WWN of the fabric.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

fabricOwner		1.3.6.1.4.1.789.1.11.2.1.5
This indicates who owns the management of the fabric.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	netapp(1), other(2), unknown(3)

switchTable		1.3.6.1.4.1.789.1.11.3
Provide a list of switches and hubs connected to the fabric.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwitchEntry

switchEntry		1.3.6.1.4.1.789.1.11.3.1
Provide a report of current configuration and status of fabric interconnect elements. This include switches and hubs.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SwitchEntry

switchIndex		1.3.6.1.4.1.789.1.11.3.1.1
A number that identifies this switch entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

switchName		1.3.6.1.4.1.789.1.11.3.1.2
This is the WWN of the switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

switchSymbolicName		1.3.6.1.4.1.789.1.11.3.1.3
This is the symbolic name of the switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

switchType		1.3.6.1.4.1.789.1.11.3.1.4
The type of the switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hub(1), switch(2), unknown(3)

switchDomain		1.3.6.1.4.1.789.1.11.3.1.5
The domain identifier of the switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

switchManagementId		1.3.6.1.4.1.789.1.11.3.1.6
The in-band management identifier of the switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

switchStatus		1.3.6.1.4.1.789.1.11.3.1.7
The current status of the switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6)

switchStatusMessage		1.3.6.1.4.1.789.1.11.3.1.8
A string describing the switch status, including a description of the condition (if any) that caused the status to be anything other than ok(3).
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

switchLinkSpeed		1.3.6.1.4.1.789.1.11.3.1.9
The link speed of the switch. The value is an integer whose units are Gbits (for example, a value of 2 represents a link speed of 2 Gbit).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

switchHighPacketsProcessed		1.3.6.1.4.1.789.1.11.3.1.10
Number of Packets successfully processed since the last reboot/reset of the switch. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

switchLowPacketsProcessed		1.3.6.1.4.1.789.1.11.3.1.11
Number of Packets successfully processed since the last reboot/reset of the switch. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

switchHighPacketsRejected		1.3.6.1.4.1.789.1.11.3.1.12
Number of Packets rejected since the last reboot/reset of the switch. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

switchLowPacketsRejected		1.3.6.1.4.1.789.1.11.3.1.13
Number of Packets rejected since the last reboot/reset of the switch. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

switchFabricIndex		1.3.6.1.4.1.789.1.11.3.1.14
The index of the fabric on which this switch resides. The value ranges from 1 to the value of fabricInstances.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

portTable		1.3.6.1.4.1.789.1.11.4
Provide a list of ports connected to the fabric.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PortEntry

portEntry		1.3.6.1.4.1.789.1.11.4.1
Provide a report of current configuration and status of ports in the fabric.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PortEntry

portIndex		1.3.6.1.4.1.789.1.11.4.1.1
A number that identifies this port entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

portName		1.3.6.1.4.1.789.1.11.4.1.2
This is the WWN of the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

portSwitchIndex		1.3.6.1.4.1.789.1.11.4.1.3
The index of the switch on which this port resides. The value ranges from 1 to the number of of switches.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

portSwitchName		1.3.6.1.4.1.789.1.11.4.1.4
This is the WWN of the switch to which the port is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

portNumber		1.3.6.1.4.1.789.1.11.4.1.5
The port number on the switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

portType		1.3.6.1.4.1.789.1.11.4.1.6
The type of the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unidentified(1), n-port(2), nl-port(3), f-port(4), fl-port(5), e-port(6), b-port(7)

portState		1.3.6.1.4.1.789.1.11.4.1.7
The current state of the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	online(1), offline(2), testing(3), faulty(4), unknown(5)

portFabricIndex		1.3.6.1.4.1.789.1.11.4.1.8
The index of the fabric on which this port resides. The value ranges from 1 to the value of fabricInstances.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

dump		1.3.6.1.4.1.789.1.14.1
OBJECT IDENTIFIER

restore		1.3.6.1.4.1.789.1.14.2
OBJECT IDENTIFIER

dmpActives		1.3.6.1.4.1.789.1.14.1.1
Number of active dump.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dmpAttempts		1.3.6.1.4.1.789.1.14.1.2
Number of dump attempted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dmpSuccesses		1.3.6.1.4.1.789.1.14.1.3
Number of dump succeeded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dmpFailures		1.3.6.1.4.1.789.1.14.1.4
Number of dump failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dmpTable		1.3.6.1.4.1.789.1.14.1.5
Provides a report of dumps on each dump subtree.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DmpSubtreeEntry

dmpSubtreeEntry		1.3.6.1.4.1.789.1.14.1.5.1
Shows statistics of dumps on an unique dump subtree.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DmpSubtreeEntry

dmpIndex		1.3.6.1.4.1.789.1.14.1.5.1.1
Index into the subtree dump table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

dmpStPath		1.3.6.1.4.1.789.1.14.1.5.1.2
The full path to the dump subtree. In the format of /vol//...
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

dmpStAttempts		1.3.6.1.4.1.789.1.14.1.5.1.3
No. of dump attempted for the subtree.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dmpStSuccesses		1.3.6.1.4.1.789.1.14.1.5.1.4
No. of dump succeeded for the subtree.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dmpStFailures		1.3.6.1.4.1.789.1.14.1.5.1.5
No. of dump failed for the subtree.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

lastdump		1.3.6.1.4.1.789.1.14.1.5.1.6
OBJECT IDENTIFIER

lastsuccess		1.3.6.1.4.1.789.1.14.1.5.1.7
OBJECT IDENTIFIER

dmpTime		1.3.6.1.4.1.789.1.14.1.5.1.6.1
The start time for the last attempt to dump the subtree, including the currently running one. The time in seconds since January 1, 1970.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dmpStatus		1.3.6.1.4.1.789.1.14.1.5.1.6.2
The status for the last dump attempt on the subtree.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), restartable(2), success(3), failed(4)

dmpLevel		1.3.6.1.4.1.789.1.14.1.5.1.7.1
The level of the dump.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..9

dmpNumFiles		1.3.6.1.4.1.789.1.14.1.5.1.7.2
The number of files dumped.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dmpDataAmount		1.3.6.1.4.1.789.1.14.1.5.1.7.3
The amount of data dumped, in Megabytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dmpStartTime		1.3.6.1.4.1.789.1.14.1.5.1.7.4
The start time of the dump. The time is in seconds since January 1, 1970.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dmpDuration		1.3.6.1.4.1.789.1.14.1.5.1.7.5
The duration of the dump.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

rstActives		1.3.6.1.4.1.789.1.14.2.1
Number of active restore.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rstAttempts		1.3.6.1.4.1.789.1.14.2.2
Number of restore attempted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rstSuccesses		1.3.6.1.4.1.789.1.14.2.3
Number of restore succeeded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rstFailures		1.3.6.1.4.1.789.1.14.2.4
Number of restore failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsOptions		1.3.6.1.4.1.789.1.12.1
OBJECT IDENTIFIER

dafsIsLicensed		1.3.6.1.4.1.789.1.12.1.1
Whether the dafs protocol is licensed on the filer. Data OnTap Specific
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

dafsMaxRequestsServer		1.3.6.1.4.1.789.1.12.1.2
Server wide maximum number of concurrent requests Data OnTap Specific
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

dafsMaxRequests		1.3.6.1.4.1.789.1.12.1.3
Server maximum number of concurrent requests per session Data OnTap Specific
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

dafsMaxRequestSize		1.3.6.1.4.1.789.1.12.1.4
Server maximum size of an inline request
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dafsMaxResponseSize		1.3.6.1.4.1.789.1.12.1.5
Server maximum size of an inline response
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dafsMaxPendingRequestsServer		1.3.6.1.4.1.789.1.12.1.6
Server wide maximum number of requests that can queue waiting for resources Data OnTap Specific
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

dafsUseChecksums		1.3.6.1.4.1.789.1.12.1.7
Server uses checksums
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

dafsNicNumRequestDemons		1.3.6.1.4.1.789.1.12.1.8
Server default number of request demons per Nic. Data OnTap Specific
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

dafsAnonymousAuthentication		1.3.6.1.4.1.789.1.12.1.9
Allow the server to acception connections with authentication type NONE.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

dafsServerEnabled		1.3.6.1.4.1.789.1.12.1.10
Current status of the DAFS server. If true, the DAFS server is running.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

dafsDefaultUid		1.3.6.1.4.1.789.1.12.1.11
Default client User ID if anonymously connected.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dafsDefaultGid		1.3.6.1.4.1.789.1.12.1.12
Default client Group ID if anonymously connected.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dafsMaxDisconnectedSessions		1.3.6.1.4.1.789.1.12.1.13
Maximum number of disconnected sessions for which the DAFS server will retain response cache data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dafsMaxIdleSeconds		1.3.6.1.4.1.789.1.12.1.14
Maximum number of seconds server will keep a session open without hearing from the client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dafsNicTable		1.3.6.1.4.1.789.1.12.2
A table containing DAFS NIC specific information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DafsNicEntry

dafsNicEntry		1.3.6.1.4.1.789.1.12.2.1
Information about a particular current DAFS nic. An object of this type is transient, in that it ceases to exist when (or soon after) the nic is detached.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DafsNicEntry

dafsNicIndex		1.3.6.1.4.1.789.1.12.2.1.1
A unique value for each interface. Its value ranges between 1 and the value of DafsNicNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

dafsNicName		1.3.6.1.4.1.789.1.12.2.1.2
A textual string containing the logical name under which the nic has been attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

dafsNicDevice		1.3.6.1.4.1.789.1.12.2.1.3
A textual string containing the physical name of the nic that has been attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

dafsNicState		1.3.6.1.4.1.789.1.12.2.1.4
Current state of DAFS nic
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2), testing(3)

dafsNicListenAddr		1.3.6.1.4.1.789.1.12.2.1.5
Transport specific address structure giving the DAFS listen address for this NIC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

dafsNicNumRqstDemons		1.3.6.1.4.1.789.1.12.2.1.6
Number of request demons assigned to this Nic to handle Nic related events. Data OnTap Specific
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

dafsNicInBytes		1.3.6.1.4.1.789.1.12.2.1.7
Total number of bytes, include DMA, received on this interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsNicDirectInBytes		1.3.6.1.4.1.789.1.12.2.1.8
Total number of bytes read directly from the peer memory through this interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsNicOutBytes		1.3.6.1.4.1.789.1.12.2.1.9
Total number of bytes, include DMA, sent on this interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsNicDirectOutBytes		1.3.6.1.4.1.789.1.12.2.1.10
Total number of bytes written directly to the peer memory through this interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

curDafs		1.3.6.1.4.1.789.1.12.3
OBJECT IDENTIFIER

dafsPendingRequests		1.3.6.1.4.1.789.1.12.3.1
Server wide current number of requests that are queued waiting for resources Data OnTap Specific
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

dafsCurrentRequests		1.3.6.1.4.1.789.1.12.3.2
Server wide current number of active requests Data OnTap Specific
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

totDafs		1.3.6.1.4.1.789.1.12.4
OBJECT IDENTIFIER

dafsCalls		1.3.6.1.4.1.789.1.12.4.1
Total number of DAFS calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsClientAuths		1.3.6.1.4.1.789.1.12.4.2
Total number of Client Auth calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsClientConnects		1.3.6.1.4.1.789.1.12.4.3
Total number of Client Connect calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsClientConnectAuths		1.3.6.1.4.1.789.1.12.4.4
Total number of Client Connect Auth calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsConnectBinds		1.3.6.1.4.1.789.1.12.4.5
Total number of Connect Bind calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsDisconnects		1.3.6.1.4.1.789.1.12.4.6
Total number of Disconnect calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsRegisterCreds		1.3.6.1.4.1.789.1.12.4.7
Total number of Register Credential calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsReleaseCreds		1.3.6.1.4.1.789.1.12.4.8
Total number of Release Credential calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsSecinfos		1.3.6.1.4.1.789.1.12.4.9
Total number of Secinfo calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsServerAuths		1.3.6.1.4.1.789.1.12.4.10
Total number of Server Auth calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsCheckResponses		1.3.6.1.4.1.789.1.12.4.11
Total number of Check Response calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsFetchResponses		1.3.6.1.4.1.789.1.12.4.12
Total number of Fetch Response calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsDiscardResponses		1.3.6.1.4.1.789.1.12.4.13
Total number of Discard Responses calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsAccesses		1.3.6.1.4.1.789.1.12.4.14
Total number of Access calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsCacheHints		1.3.6.1.4.1.789.1.12.4.15
Total number of Cache Hint calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsCloses		1.3.6.1.4.1.789.1.12.4.16
Total number of Close calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsCommits		1.3.6.1.4.1.789.1.12.4.17
Total number of Commit calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsCreates		1.3.6.1.4.1.789.1.12.4.18
Total number of Create calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsDelegPurges		1.3.6.1.4.1.789.1.12.4.19
Total number of Delegate Purge calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsDelegReturns		1.3.6.1.4.1.789.1.12.4.20
Total number of Delegate Return calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsGetFsattrs		1.3.6.1.4.1.789.1.12.4.21
Total number of Get Fsattr calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsGetRootHandles		1.3.6.1.4.1.789.1.12.4.22
Total number of Get Root Handle calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsGetattrInlines		1.3.6.1.4.1.789.1.12.4.23
Total number of Getattr Inline calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsGetattrDirects		1.3.6.1.4.1.789.1.12.4.24
Total number of Getattr Direct calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsLinks		1.3.6.1.4.1.789.1.12.4.25
Total number of Link calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsLocks		1.3.6.1.4.1.789.1.12.4.26
Total number of Lock calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsLockts		1.3.6.1.4.1.789.1.12.4.27
Total number of LockT calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsLockus		1.3.6.1.4.1.789.1.12.4.28
Total number of LockU calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsLookUps		1.3.6.1.4.1.789.1.12.4.29
Total number of LookUp calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsLookUpps		1.3.6.1.4.1.789.1.12.4.30
Total number of LookUpp calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsNulls		1.3.6.1.4.1.789.1.12.4.31
Total number of Null calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsNverifys		1.3.6.1.4.1.789.1.12.4.32
Total number of Nverify calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsOpens		1.3.6.1.4.1.789.1.12.4.33
Total number of Open calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsOpenDowngrades		1.3.6.1.4.1.789.1.12.4.34
Total number of Open Downgrade calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsOpenattrs		1.3.6.1.4.1.789.1.12.4.35
Total number of Openattr calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsReadInlines		1.3.6.1.4.1.789.1.12.4.36
Total number of Read Inline calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsReadDirects		1.3.6.1.4.1.789.1.12.4.37
Total number of Read Direct calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsReaddirInlines		1.3.6.1.4.1.789.1.12.4.38
Total number of Readdir Inline calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsReaddirDirects		1.3.6.1.4.1.789.1.12.4.39
Total number of Readdir Direct calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsReadlinkInlines		1.3.6.1.4.1.789.1.12.4.40
Total number of Readlink Inline calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsReadlinkDirects		1.3.6.1.4.1.789.1.12.4.41
Total number of Readlink Direct calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsRemoves		1.3.6.1.4.1.789.1.12.4.42
Total number of Remove calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsRenames		1.3.6.1.4.1.789.1.12.4.43
Total number of Rename calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsSetattrInlines		1.3.6.1.4.1.789.1.12.4.44
Total number of Setattr Inline calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsSetattrDirects		1.3.6.1.4.1.789.1.12.4.45
Total number of Setattr Direct calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsVerifys		1.3.6.1.4.1.789.1.12.4.46
Total number of Verify calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsBatchSubmits		1.3.6.1.4.1.789.1.12.4.47
Total number of Batch Submit calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsWriteInlines		1.3.6.1.4.1.789.1.12.4.48
Total number of Write Inline calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsWriteDirects		1.3.6.1.4.1.789.1.12.4.49
Total number of Write Direct calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsBcGetattrs		1.3.6.1.4.1.789.1.12.4.50
Total number of BC Getattr calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsBcNulls		1.3.6.1.4.1.789.1.12.4.51
Total number of BC Null calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsBcRecalls		1.3.6.1.4.1.789.1.12.4.52
Total number of BC Recall calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsBcBatchCompletions		1.3.6.1.4.1.789.1.12.4.53
Total number of BC Batch Completion calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsAppendInlines		1.3.6.1.4.1.789.1.12.4.54
Total number of Append Inline calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsAppendDirects		1.3.6.1.4.1.789.1.12.4.55
Total number of Append Direct calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsGetFencingLists		1.3.6.1.4.1.789.1.12.4.56
Total number of Get Fencing List calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsSetFencingLists		1.3.6.1.4.1.789.1.12.4.57
Total number of Set Fencing List calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsHurryUps		1.3.6.1.4.1.789.1.12.4.58
Total number of Hurry Up calls since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsInBytes		1.3.6.1.4.1.789.1.12.4.59
Total number of bytes, including DMA, received since the last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsDirectInBytes		1.3.6.1.4.1.789.1.12.4.60
Total number of bytes received directly into memory since last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsOutBytes		1.3.6.1.4.1.789.1.12.4.61
Total number of bytes, including DMA, sent since the last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsDirectOutBytes		1.3.6.1.4.1.789.1.12.4.62
Total number of bytes sent directly into remote memory since the last reboot
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dafsSessionTable		1.3.6.1.4.1.789.1.12.5
A table containing current DAFS client session information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DafsSessionEntry

dafsSessionEntry		1.3.6.1.4.1.789.1.12.5.1
Information about a particular DAFS session. An object of this type is transient, in that it ceases to exist when (or soon after) the client disconnects.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DafsSessionEntry

dafsSessionIndex		1.3.6.1.4.1.789.1.12.5.1.1
A unique value for each session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

dafsSessionId		1.3.6.1.4.1.789.1.12.5.1.2
Session Identifier assigned by the server.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

dafsSessionEndian		1.3.6.1.4.1.789.1.12.5.1.3
Byte order used on this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	bigEndian(1), littleEndian(2)

dafsSessionAllowBackChannel		1.3.6.1.4.1.789.1.12.5.1.4
Session may use a back control channel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

dafsSessionAllowRdmaReadChannel		1.3.6.1.4.1.789.1.12.5.1.5
Session may use a RDMA read channel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

dafsSessionUseChecksums		1.3.6.1.4.1.789.1.12.5.1.6
Session uses checksums.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

dafsSessionMaxCredentials		1.3.6.1.4.1.789.1.12.5.1.7
Maximum number of credientials that can be registered on this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dafsSessionMaxRequestSize		1.3.6.1.4.1.789.1.12.5.1.8
Maximum size of a DAFS request.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dafsSessionMaxResponseSize		1.3.6.1.4.1.789.1.12.5.1.9
Maximum size of a DAFS response.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dafsSessionMaxRequests		1.3.6.1.4.1.789.1.12.5.1.10
Maximum number of concurrent requests.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dafsSessionInlineWriteHeaderSize		1.3.6.1.4.1.789.1.12.5.1.11
Size of DAFS headers plus padding to the start of data. Used to better align inline data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dafsSessionClientIdString		1.3.6.1.4.1.789.1.12.5.1.12
Client ID string supplied by the client. Intended to uniquely identify that client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(32)

dafsSessionClientVerifier		1.3.6.1.4.1.789.1.12.5.1.13
Supplied by the client to uniquely identify an instnce of a client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

dafsSessionNumCredentials		1.3.6.1.4.1.789.1.12.5.1.14
Current number of credentials registered on this session
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dafsSessionNumRequests		1.3.6.1.4.1.789.1.12.5.1.15
Current number of active requests on this session
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dafsExportTable		1.3.6.1.4.1.789.1.12.6
A table containing DAFS Export filesystems.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DafsExportEntry

dafsExportEntry		1.3.6.1.4.1.789.1.12.6.1
Information about a particular current DAFS export. An object of this type is transient, in that it ceases to exist when (or soon after) the export is deleted.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DafsExportEntry

dafsExportIndex		1.3.6.1.4.1.789.1.12.6.1.1
A unique value for each export. Its value ranges between 1 and the number of exports. The value for each export must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

dafsExportName		1.3.6.1.4.1.789.1.12.6.1.2
A textual string containing information about the export. This is the logical export name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

dafsExportPath		1.3.6.1.4.1.789.1.12.6.1.3
A textual string containing information about the export. This is the local filesystem path to the export.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

dafsExportEnabled		1.3.6.1.4.1.789.1.12.6.1.4
This export is available for access.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

dafsExportRwMode		1.3.6.1.4.1.789.1.12.6.1.5
Global export mode. This represents the maximum access rights.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	readwrite(1), readmostly(2), readonly(3)

dafsExportAccessList		1.3.6.1.4.1.789.1.12.6.1.6
A textual string containing information about the export. This is the list of hosts that may access the export. If empty, all hosts may access the export.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

viaNodeConnection		1.3.6.1.4.1.789.1.13.1
OBJECT IDENTIFIER

viaNodeSystemName		1.3.6.1.4.1.789.1.13.1.1
A string by which the node is identified in the cluster.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

viaCreated		1.3.6.1.4.1.789.1.13.1.2
The number of VIs created.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaConnectRequest		1.3.6.1.4.1.789.1.13.1.3
The number of times Connect Request call is made.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaConnectWait		1.3.6.1.4.1.789.1.13.1.4
The number of times Connect wait call is made.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaDisconnect		1.3.6.1.4.1.789.1.13.1.5
Number of times VI got disconnected with out any error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaConnectTimeOut		1.3.6.1.4.1.789.1.13.1.6
Number of times VI connect request got timed out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaConnected		1.3.6.1.4.1.789.1.13.1.7
Number of time VI got connected with out any error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaCurrConnectPending		1.3.6.1.4.1.789.1.13.1.8
The number of VIs for which connect request is pending.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

viaCurrConnectWaitPending		1.3.6.1.4.1.789.1.13.1.9
The number of VIs for which connect wait request is pending.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

viaCurrConnected		1.3.6.1.4.1.789.1.13.1.10
The number of VIs for which the current state is CONNECTED.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

viaCurrError		1.3.6.1.4.1.789.1.13.1.11
The number of VIs for which the current state is ERROR
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

viaTotalError		1.3.6.1.4.1.789.1.13.1.12
The number of VIs which encountered error state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaInMsgs		1.3.6.1.4.1.789.1.13.1.13
The total number of incoming Messages received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaInRdma		1.3.6.1.4.1.789.1.13.1.14
The total number of incoming RDMA requests received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaInBytes		1.3.6.1.4.1.789.1.13.1.15
The total number of incoming bytes received, including those received in error. This count includes bytes received on currently established connections. This corresponds to the sum of bytes received through received messages, incoming RDMA writes and RDMA reads issued
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaInRDMAReadBytes		1.3.6.1.4.1.789.1.13.1.16
The total number of incoming bytes received through RDMA read, including those received in error. This count includes bytes received on currently established connections.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaInRDMAWriteBytes		1.3.6.1.4.1.789.1.13.1.17
The total number of bytes received through incoming RDMA writes, including those received in error. This count includes bytes received on currently established connections.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaOutMsgs		1.3.6.1.4.1.789.1.13.1.18
The total number of Messages sent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaOutRdma		1.3.6.1.4.1.789.1.13.1.19
The total number of RDMA requests sent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaOutBytes		1.3.6.1.4.1.789.1.13.1.20
The total number of bytes sent, including those sent in error. This count includes bytes sent on currently established connections.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaOutRDMAReadBytes		1.3.6.1.4.1.789.1.13.1.21
The total number of bytes sent through an incoming RDMA read request, including those sent in error. This count includes bytes sent on currently established connections.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaOutRDMAWriteBytes		1.3.6.1.4.1.789.1.13.1.22
The total number of bytes sent through a RDMA write operation, including those sent in error. This count includes bytes sent on currently established connections.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaConnTable		1.3.6.1.4.1.789.1.13.1.23
A table containing via connection specific information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ViaConnEntry

viaConnEntry		1.3.6.1.4.1.789.1.13.1.23.1
A conceptual row of the viaConnTable containing information about a particular current via connection. Each row of this table is transient, and it ceases to exist when the connection makes transition to the CLOSED state.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ViaConnEntry

viaConnState		1.3.6.1.4.1.789.1.13.1.23.1.1
The state of this via connection Legal States: Idle 1 Pending Connect 2 Connected 3 Error 4
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), pendingConnect(2), connected(3), error(4)

viaConnVINumber		1.3.6.1.4.1.789.1.13.1.23.1.2
A number which uniquely defines a connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

viaConnRemoteNetAddress		1.3.6.1.4.1.789.1.13.1.23.1.3
IP address of the remote system of the connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

viaConnLocalNetAddress		1.3.6.1.4.1.789.1.13.1.23.1.4
Local IPadress of the connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

viaConnRemotePortNumber		1.3.6.1.4.1.789.1.13.1.23.1.5
Remote TCP portnumber of the connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaConnLocalPortNumber		1.3.6.1.4.1.789.1.13.1.23.1.6
Local TCP Portnumber of the connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaConnLocalDescriminator		1.3.6.1.4.1.789.1.13.1.23.1.7
An identifier used by the local process to identify the VI connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

viaConnRemoteDescriminator		1.3.6.1.4.1.789.1.13.1.23.1.8
An identifier used by the remote process to identify the VI connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

viaConnLocalMaxTransferSize		1.3.6.1.4.1.789.1.13.1.23.1.9
The local limit on the maximum packet size that can be transfered through the connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaConnRemoteMaxTransferSize		1.3.6.1.4.1.789.1.13.1.23.1.10
The remote limit on the maximum packet size that can be transfered through the connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaConnLocalEnableRdmaWrite		1.3.6.1.4.1.789.1.13.1.23.1.11
The value is 1 if remote DMA write is enabled in the local system otherwise, it is 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaConnLocalEnableRdmaRead		1.3.6.1.4.1.789.1.13.1.23.1.12
The value is 1 if remote DMA read is enabled in the local system otherwise, it is 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaConnRemoteEnableRdmaWrite		1.3.6.1.4.1.789.1.13.1.23.1.13
The value is 1 if remote DMA write is enabled in the remote system otherwise, it is 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaConnRemoteEnableRdmaRead		1.3.6.1.4.1.789.1.13.1.23.1.14
The value is 1 if remote DMA read is enabled in the remote system otherwise, it is 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaConnSentMessages		1.3.6.1.4.1.789.1.13.1.23.1.15
Total number of messages sent through the connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaConnSentRdmaReadMessages		1.3.6.1.4.1.789.1.13.1.23.1.16
Total number of rdma read messages sent through the connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaConnSentRdmaWriteMessages		1.3.6.1.4.1.789.1.13.1.23.1.17
Total number of rdma write messages sent through the connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaConnRcvdMessages		1.3.6.1.4.1.789.1.13.1.23.1.18
Total number of messages received through the connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaConnRcvdRdmaReadMessages		1.3.6.1.4.1.789.1.13.1.23.1.19
Total number of rdma read messages received through the connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaConnRcvdRdmaWriteMessages		1.3.6.1.4.1.789.1.13.1.23.1.20
Total number of rdma write messages received through the connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaErrors		1.3.6.1.4.1.789.1.13.2
OBJECT IDENTIFIER

viaErrPostDesc		1.3.6.1.4.1.789.1.13.2.1
The total number of descriptors completed in error by NIC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaErrConnLost		1.3.6.1.4.1.789.1.13.2.2
The total number of Lost Connection errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaErrRecvQEmpty		1.3.6.1.4.1.789.1.13.2.3
The total number of errors due to an empty receive Queue.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaErrRdmawProt		1.3.6.1.4.1.789.1.13.2.4
The total number of remote DMA write protection errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaErrRdmarProt		1.3.6.1.4.1.789.1.13.2.5
The total number of remote DMA read protection errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaErrCompProt		1.3.6.1.4.1.789.1.13.2.6
The total number of protection errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

viaErrorThreshold		1.3.6.1.4.1.789.1.13.2.7
Setting this threshold will cause a trap to be enabled such that if the total error exceeds error threshold set a viaNodeErrorsTrap trap will be generated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

viaNicAttributes		1.3.6.1.4.1.789.1.13.3
OBJECT IDENTIFIER

viaNicTable		1.3.6.1.4.1.789.1.13.3.1
A table containing via NIC-specific information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ViaNicEntry

viaNicEntry		1.3.6.1.4.1.789.1.13.3.1.1
A conceptual row of the viaNicTable containing information about a particular present VINic.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ViaNicEntry

viaNicIndex		1.3.6.1.4.1.789.1.13.3.1.1.1
The index of the NIC in the NIC table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

viaName		1.3.6.1.4.1.789.1.13.3.1.1.2
The symbolic name of the NIC device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

viaHardwareVersion		1.3.6.1.4.1.789.1.13.3.1.1.3
The version of the VINIC described by this MIB.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

viaProviderVersion		1.3.6.1.4.1.789.1.13.3.1.1.4
The version of the VI provider.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

viaNicAddress		1.3.6.1.4.1.789.1.13.3.1.1.5
The Network address of this NIC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

viaThreadSafe		1.3.6.1.4.1.789.1.13.3.1.1.6
1 if synchronisation model is thread safe else 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaMaxDiscriminatorLength		1.3.6.1.4.1.789.1.13.3.1.1.7
The maximum number of bytes that the VI provider allows for a connection descriminator.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaMaxRegisterBytes		1.3.6.1.4.1.789.1.13.3.1.1.8
Maximum number of bytes that can be registered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaMaxRegisterRegions		1.3.6.1.4.1.789.1.13.3.1.1.9
Maximum number of memory regions that can be registered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaMaxRegisterBlockBytes		1.3.6.1.4.1.789.1.13.3.1.1.10
Largest contiguous block of memory that can be registered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaMaxVI		1.3.6.1.4.1.789.1.13.3.1.1.11
The limit on the total number of VI instances this entity can support.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaMaxDescriptorsPerQueue		1.3.6.1.4.1.789.1.13.3.1.1.12
Maximum Descriptors per VI Work Queue that this VI provider can support.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaMaxSegmentsPerDesc		1.3.6.1.4.1.789.1.13.3.1.1.13
Maximum number of segments per descriptor that this VI provider can support.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaMaxCQ		1.3.6.1.4.1.789.1.13.3.1.1.14
Maximum number of completion queues this VI provider can support.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaMaxCQEntries		1.3.6.1.4.1.789.1.13.3.1.1.15
Maximum number of Completion queue entries per completion queue that this VI provider can support.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaMaxTransferSize		1.3.6.1.4.1.789.1.13.3.1.1.16
The maximum transfer size supported by the VI Nic. The maximum transfer size is the amount of data that can be described by a single VI descriptor.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaNativeMTU		1.3.6.1.4.1.789.1.13.3.1.1.17
The native MTU size of the underlying network. For frame-based networks, this could reflect its native frame size. For cell-based networks, it could reflect the MTU of the appropriate abstraction layer that it supports.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaMaxPTags		1.3.6.1.4.1.789.1.13.3.1.1.18
The maximum number of protection tags that are supported by this VI provider.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaCurrRegisterBytes		1.3.6.1.4.1.789.1.13.3.1.1.19
Number of bytes registered by the VI user for this NIC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaCurrRegisterRegions		1.3.6.1.4.1.789.1.13.3.1.1.20
Number of memory regions that is registered by VI user for this NIC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaCurrVI		1.3.6.1.4.1.789.1.13.3.1.1.21
The current number of VI instances for this NIC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaCurrCQ		1.3.6.1.4.1.789.1.13.3.1.1.22
Current number of completion queues this VI provider has.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaCurrPTags		1.3.6.1.4.1.789.1.13.3.1.1.23
Current Number of protection tags this VI provider has.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

viaConnectionListenPort		1.3.6.1.4.1.789.1.13.3.1.1.24
Port number on which VI server is listening for VI connection request.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

vfilerIsLicensed		1.3.6.1.4.1.789.1.16.1
Whether vfiler is licensed on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

vfFilers		1.3.6.1.4.1.789.1.16.2
Number of vfilers in the physical Filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

vfTable		1.3.6.1.4.1.789.1.16.3
Provide a report of pre-vfiler general information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VfEntry

vfEntry		1.3.6.1.4.1.789.1.16.3.1
Provide a report of per-vfiler information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VfEntry

vfIndex		1.3.6.1.4.1.789.1.16.3.1.1
A number that identifies this entry for the referenced vfiler.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

vfName		1.3.6.1.4.1.789.1.16.3.1.2
A textual string that contains the name of the referenced vfiler.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

vfUuid		1.3.6.1.4.1.789.1.16.3.1.3
The UUID of the referenced vfiler.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..36)

vfIpAddresses		1.3.6.1.4.1.789.1.16.3.1.4
The total number of IP addresses for the referenced vfiler.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

vfStoragePaths		1.3.6.1.4.1.789.1.16.3.1.5
The total number of storage paths for the referenced vfiler.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

vfIpSpace		1.3.6.1.4.1.789.1.16.3.1.6
A textual string that contains the name of the ipspace that the referenced vfiler belongs to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

vfAllowedProtocols		1.3.6.1.4.1.789.1.16.3.1.7
Total number of protocols allowed for the referenced vfiler.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

vfDisallowedProtocols		1.3.6.1.4.1.789.1.16.3.1.8
Total number of protocols disallowed for the referenced vfiler.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

vfState		1.3.6.1.4.1.789.1.16.3.1.9
Status of the vfiler: Running or stopped.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	stopped(1), running(2)

vfIpTable		1.3.6.1.4.1.789.1.16.4
Provide a report of per-vfiler IP addresses information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VfIpEntry

vfIpEntry		1.3.6.1.4.1.789.1.16.4.1
Provide a report of per-vfiler IP addresses information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VfIpEntry

vfFiIndex		1.3.6.1.4.1.789.1.16.4.1.1
A number that identifies the referenced vfiler.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

vfIpIndex		1.3.6.1.4.1.789.1.16.4.1.2
A number that identifies which IP address in the referenced vfiler.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

vfIpAddr		1.3.6.1.4.1.789.1.16.4.1.3
A IP address for the referenced vfiler.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

vfSpTable		1.3.6.1.4.1.789.1.16.5
Provide a report of per-vfiler storage path information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VfSpEntry

vfSpEntry		1.3.6.1.4.1.789.1.16.5.1
Provide a report of per-vfiler storage path information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VfSpEntry

vfFsIndex		1.3.6.1.4.1.789.1.16.5.1.1
A number that identifies the referenced vfiler.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

vfSpIndex		1.3.6.1.4.1.789.1.16.5.1.2
A number that identifies which storage path in the referenced vfiler.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

vfSpName		1.3.6.1.4.1.789.1.16.5.1.3
The storage path name for the referenced vfiler.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..1024)

vfProTable		1.3.6.1.4.1.789.1.16.6
Provide a report of per-vfiler protocol information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VfProEntry

vfProEntry		1.3.6.1.4.1.789.1.16.6.1
Provide a report of per-vfiler protocol information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VfProEntry

vfFpIndex		1.3.6.1.4.1.789.1.16.6.1.1
A number that identifies the referenced vfiler.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

vfProIndex		1.3.6.1.4.1.789.1.16.6.1.2
A number that identifies a protocol in the referenced vfiler.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

vfProName		1.3.6.1.4.1.789.1.16.6.1.3
A textual string that contains the protocol name for the referenced vfiler.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..1024)

vfProStatus		1.3.6.1.4.1.789.1.16.6.1.4
Whether the referenced vfiler protocol is allowed or disallowed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

fcpIsLicensed		1.3.6.1.4.1.789.1.17.1
Whether FCP access protocols are licensed on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

iscsiIsLicensed		1.3.6.1.4.1.789.1.17.2
Whether iSCSI access protocols are licensed on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

fcpLowReadBytes		1.3.6.1.4.1.789.1.17.3
The total number of bytes read via FCP since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

fcpHighReadBytes		1.3.6.1.4.1.789.1.17.4
The total number of bytes read via FCP since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

fcpLowWriteBytes		1.3.6.1.4.1.789.1.17.5
The total number of bytes written via FCP since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

fcpHighWriteBytes		1.3.6.1.4.1.789.1.17.6
The total number of bytes written via FCP since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

iscsiLowReadBytes		1.3.6.1.4.1.789.1.17.7
The total number of bytes read via iSCSI since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

iscsiHighReadBytes		1.3.6.1.4.1.789.1.17.8
The total number of bytes read via iSCSI since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

iscsiLowWriteBytes		1.3.6.1.4.1.789.1.17.9
The total number of bytes written via iSCSI since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

iscsiHighWriteBytes		1.3.6.1.4.1.789.1.17.10
The total number of bytes written via iSCSI since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

iscsiHighOps		1.3.6.1.4.1.789.1.17.11
The total number of iSCSI ops handled since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

iscsiLowOps		1.3.6.1.4.1.789.1.17.12
The total number of iSCSI ops handled since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

fcpHighOps		1.3.6.1.4.1.789.1.17.13
The total number of FCP ops handled since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

fcpLowOps		1.3.6.1.4.1.789.1.17.14
The total number of FCP ops handled since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

lun		1.3.6.1.4.1.789.1.17.15
OBJECT IDENTIFIER

lunCount		1.3.6.1.4.1.789.1.17.15.1
Number of LUNs in the Filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

lunTable		1.3.6.1.4.1.789.1.17.15.2
Provide a report of per-LUN general information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		LunEntry

lunEntry		1.3.6.1.4.1.789.1.17.15.2.1
Provide a report of per-LUN information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	LunEntry

lunIndex		1.3.6.1.4.1.789.1.17.15.2.1.1
A number that identifies the referenced LUN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

lunName		1.3.6.1.4.1.789.1.17.15.2.1.2
The name of the LUN. This is also the path to the LUN on the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

lunComment		1.3.6.1.4.1.789.1.17.15.2.1.3
The comment, if any, for this LUN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

lunSizeLow		1.3.6.1.4.1.789.1.17.15.2.1.4
Size of the LUN in bytes. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

lunSizeHigh		1.3.6.1.4.1.789.1.17.15.2.1.5
Size of the LUN in bytes. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

lunMapped		1.3.6.1.4.1.789.1.17.15.2.1.6
This LUN has been mapped to at least one initiator group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

lunSerialNumber		1.3.6.1.4.1.789.1.17.15.2.1.7
The 12 character SCSI serial number of the LUN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

lunQtreeName		1.3.6.1.4.1.789.1.17.15.2.1.8
A string that indicates which qtree this LUN belongs to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

lunHighOps		1.3.6.1.4.1.789.1.17.15.2.1.9
The total number of Target side SCSI ops for this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

lunLowOps		1.3.6.1.4.1.789.1.17.15.2.1.10
The total number of Target side SCSI ops for this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

lunHighReadBytes		1.3.6.1.4.1.789.1.17.15.2.1.11
The total number of bytes read from this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

lunLowReadBytes		1.3.6.1.4.1.789.1.17.15.2.1.12
The total number of bytes read from this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

lunHighWriteBytes		1.3.6.1.4.1.789.1.17.15.2.1.13
The total number of bytes written to this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

lunLowWriteBytes		1.3.6.1.4.1.789.1.17.15.2.1.14
The total number of bytes written to this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

lunHighErrors		1.3.6.1.4.1.789.1.17.15.2.1.15
The total number of errors seen on this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

lunLowErrors		1.3.6.1.4.1.789.1.17.15.2.1.16
The total number of errors seen on this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

lunOnline		1.3.6.1.4.1.789.1.17.15.2.1.17
Whether the LUN is online.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

lunSnapStatus		1.3.6.1.4.1.789.1.17.15.2.1.18
Whether a snapshot of this LUN can be taken.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

lunShareStatus		1.3.6.1.4.1.789.1.17.15.2.1.19
The sharing status for the LUN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), read(2), write(3), all(4)

lunSpaceReserved		1.3.6.1.4.1.789.1.17.15.2.1.20
Whether the LUN has space reservation enabled.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

lunStatsResetTime		1.3.6.1.4.1.789.1.17.15.2.1.21
Number of seconds since this LUN's stats were last reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

lunHighReadOps		1.3.6.1.4.1.789.1.17.15.2.1.22
The total number of Target side SCSI read ops for this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

lunLowReadOps		1.3.6.1.4.1.789.1.17.15.2.1.23
The total number of Target side SCSI read ops for this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

lunHighWriteOps		1.3.6.1.4.1.789.1.17.15.2.1.24
The total number of Target side SCSI write ops for this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

lunLowWriteOps		1.3.6.1.4.1.789.1.17.15.2.1.25
The total number of Target side SCSI write ops for this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

lunHighOtherOps		1.3.6.1.4.1.789.1.17.15.2.1.26
The total number of Target side SCSI ops that are not read or write for this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

lunLowOtherOps		1.3.6.1.4.1.789.1.17.15.2.1.27
The total number of Target side SCSI ops that are not read or write for this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

lunMapTable		1.3.6.1.4.1.789.1.17.15.3
Provide a table listing the initiator group to Logical Unit Number mapping for each LUN.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		LunMapEntry

lunMapEntry		1.3.6.1.4.1.789.1.17.15.3.1
Provide a per LUN and Initiator group mapping of SCSI logical unit numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	LunMapEntry

lunMapLUNIndex		1.3.6.1.4.1.789.1.17.15.3.1.1
A number that identifies the LUN in the table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

lunMapInitiatorGroupIndex		1.3.6.1.4.1.789.1.17.15.3.1.2
A number that identifies an initiator group in the table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

lunMapLUNName		1.3.6.1.4.1.789.1.17.15.3.1.3
The name of the LUN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

lunMapInitiatorGroupName		1.3.6.1.4.1.789.1.17.15.3.1.4
The name of the initiator group that this LUN is mapped to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

lunMapLogicalUnitNumber		1.3.6.1.4.1.789.1.17.15.3.1.5
SCSI Logical Unit Number that this LUN is mapped to for this initiator group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

initiator		1.3.6.1.4.1.789.1.17.16
OBJECT IDENTIFIER

initiatorGroupTable		1.3.6.1.4.1.789.1.17.16.1
Provide a report of per-initiator group general information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InitiatorGroupEntry

initiatorGroupEntry		1.3.6.1.4.1.789.1.17.16.1.1
Provide a report of per-initiator group information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	InitiatorGroupEntry

initiatorGroupIndex		1.3.6.1.4.1.789.1.17.16.1.1.1
A number that identifies a specific initiator group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

initiatorGroupName		1.3.6.1.4.1.789.1.17.16.1.1.2
The name of the initiator group
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

initiatorGroupType		1.3.6.1.4.1.789.1.17.16.1.1.3
Type of this initiator group, either iSCSI or FCP
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	fcp(1), iSCSI(2)

initiatorGroupOS		1.3.6.1.4.1.789.1.17.16.1.1.4
Operating system the clients in this initiator group run. This governs the finer details of SCSI protocol interaction with these initiators
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	default(1), solaris(2), windows(3), hpux(4), aix(5), linux(6), default-partner(7), netware(8), vmware(9), invalid(256)

initiatorGroupThrottleReserve		1.3.6.1.4.1.789.1.17.16.1.1.5
Percentage of filer scsi command blocks reserved for this initiator group
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..99

initiatorGroupThrottleBorrow		1.3.6.1.4.1.789.1.17.16.1.1.6
True if this inititiator group is allowed to exceed it's throttle settings if more resources are needed and otherwise available. If initiatorGroupThrottleReserve is 0, this value is meaningless
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

initiatorGroupUsePartner		1.3.6.1.4.1.789.1.17.16.1.1.7
The takeover mode for the initiator group. This is only applicable to FCP initiator groups on clustered filers
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

initiatorGroupMemberTable		1.3.6.1.4.1.789.1.17.16.2
Table of individual Initator names in each Initiator group
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InitiatorGroupMemberEntry

initiatorGroupMemberEntry		1.3.6.1.4.1.789.1.17.16.2.1
Provide a report of per-initiator group information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	InitiatorGroupMemberEntry

initiatorGroupMemberIndex		1.3.6.1.4.1.789.1.17.16.2.1.1
A number that identifies a specific initiator group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

initiatorGroupMemberNameIndex		1.3.6.1.4.1.789.1.17.16.2.1.2
A number the identifies the initiator in the group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

initiatorName		1.3.6.1.4.1.789.1.17.16.2.1.3
A textual name for this initiator.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

initiatorListTable		1.3.6.1.4.1.789.1.17.16.3
Table of initiators that are connected to the filer.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InitatorListMemberEntry

initiatorListMemberEntry		1.3.6.1.4.1.789.1.17.16.3.1
Provide a report of per-connected-initiator information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	InitatorListMemberEntry

initiatorListMemberEntryIndex		1.3.6.1.4.1.789.1.17.16.3.1.1
A number that identifies the initiator connected to the target adapter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

targetAdapterName		1.3.6.1.4.1.789.1.17.16.3.1.2
The name of the target adapter in the filer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

connectedInitiatorNodeName		1.3.6.1.4.1.789.1.17.16.3.1.3
A textual name for this initiator node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

connectedInitiatorPortName		1.3.6.1.4.1.789.1.17.16.3.1.4
The FibreChannel device's portname. This is FCP only.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

connectedInitiatorType		1.3.6.1.4.1.789.1.17.16.3.1.5
Type of this init group, either iSCSI or FCP
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	fcp(1), iSCSI(2)

connectedInitiatorIsid		1.3.6.1.4.1.789.1.17.16.3.1.6
The iSCSI isid (initiator session id) for this initiator. This is iSCSI only.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

connectedInitiatorPortalGroup		1.3.6.1.4.1.789.1.17.16.3.1.7
The iSCSI portal group ID for this initiator. This is iSCSI only.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

fcpTarget		1.3.6.1.4.1.789.1.17.17
OBJECT IDENTIFIER

fcpTargetTable		1.3.6.1.4.1.789.1.17.17.1
Provide a report of fcp target adapter general information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		FcpTargetTableEntry

fcpTargetTableEntry		1.3.6.1.4.1.789.1.17.17.1.1
Provide a report of per fcp target device information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	FcpTargetTableEntry

fcpTargetTableIndex		1.3.6.1.4.1.789.1.17.17.1.1.1
A number that identifies a specific fcp target device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

fcpTargetName		1.3.6.1.4.1.789.1.17.17.1.1.2
The name of the fcp target device
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

fcpTargetNN		1.3.6.1.4.1.789.1.17.17.1.1.3
The FC WWNN of the fcp target device
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

fcpTargetPN		1.3.6.1.4.1.789.1.17.17.1.1.4
The FC WWPN of the fcp target device
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

fcpTargetSpeed		1.3.6.1.4.1.789.1.17.17.1.1.5
speed in gigabits per second. 0 is unknown.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

fcpTargetStatus		1.3.6.1.4.1.789.1.17.17.1.1.6
Status of the fcp target adapter
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	startup(1), uninitialized(2), initializing-fw(3), link-not-connected(4), waiting-for-link-up(5), online(6), link-disconnected(7), resetting(8), offline(9), offlined-by-user-system(10), unknown(11)

fcpTargetStandby		1.3.6.1.4.1.789.1.17.17.1.1.7
Whether this target adapter is in standby mode.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

fcpTargetTopology		1.3.6.1.4.1.789.1.17.17.1.1.8
fibre channel topology for this adapter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), fabric(2), point-to-point(3), loop(4)

fcpTargetType		1.3.6.1.4.1.789.1.17.17.1.1.9
Responsibility/Type for this adapter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	physical(1), local(2), standby(3), partner(4), unknown(5)

fcpCfMode		1.3.6.1.4.1.789.1.17.18
Failover setting for the FCP target cluster.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	mixed(1), standby(2), partner(3), partner-proxy(4), partner-standby(5), local-primary(6), dual-fabric(7), ssi(8), unknown(256)

pset		1.3.6.1.4.1.789.1.17.19
OBJECT IDENTIFIER

psetTable		1.3.6.1.4.1.789.1.17.19.1
Provide a report of portset general information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PortSetEntry

psetEntry		1.3.6.1.4.1.789.1.17.19.1.1
Provide a report of portset information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PortSetEntry

psetIndex		1.3.6.1.4.1.789.1.17.19.1.1.1
A number that identifies a specific port set.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

psetName		1.3.6.1.4.1.789.1.17.19.1.1.2
The name of the port set
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

psetType		1.3.6.1.4.1.789.1.17.19.1.1.3
Type of this port set, either iSCSI or FCP
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	fcp(1), iSCSI(2)

psetMemberTable		1.3.6.1.4.1.789.1.17.19.2
Table of individual Port names in each Port set
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PsetMemberEntry

psetMemberEntry		1.3.6.1.4.1.789.1.17.19.2.1
Provide a report of portset port information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PsetMemberEntry

psetMemberIndex		1.3.6.1.4.1.789.1.17.19.2.1.1
A number that identifies a specific port set.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

psetMemberNameIndex		1.3.6.1.4.1.789.1.17.19.2.1.2
A number the identifies the port in the set.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

psetPortName		1.3.6.1.4.1.789.1.17.19.2.1.3
A textual name for this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

nfsCacheOptions		1.3.6.1.4.1.789.1.18.1
OBJECT IDENTIFIER

nfsCacheIsEnabled		1.3.6.1.4.1.789.1.18.1.1
Whether NFS caching is enabled on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

nfsCacheIsLicensed		1.3.6.1.4.1.789.1.18.1.2
Whether NFS caching is licensed on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

nfsCacheStats		1.3.6.1.4.1.789.1.18.2
OBJECT IDENTIFIER

nfsCacheBytesFromClients		1.3.6.1.4.1.789.1.18.2.1
Total NFS bytes received from clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheBytesToClients		1.3.6.1.4.1.789.1.18.2.2
Total NFS bytes sent to clients
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheBytesFromServers		1.3.6.1.4.1.789.1.18.2.3
Total NFS bytes received from servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheBytesToServers		1.3.6.1.4.1.789.1.18.2.4
Total NFS bytes sent to servers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheTotalRequests		1.3.6.1.4.1.789.1.18.2.5
Total NFS requests received
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheHitRequests		1.3.6.1.4.1.789.1.18.2.6
Total NFS requests resulting in cache hits
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheMissRequests		1.3.6.1.4.1.789.1.18.2.7
Total NFS requests resulting in cache misses
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheMissCacheableRequests		1.3.6.1.4.1.789.1.18.2.8
Total NFS requests that were cacheable misses
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheMissUnCacheableRequests		1.3.6.1.4.1.789.1.18.2.9
Total NFS requests that were uncacheable misses
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheEjectRequests		1.3.6.1.4.1.789.1.18.2.10
Total NFS requests resulting in object eject due to expiration
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheVerifyRequests		1.3.6.1.4.1.789.1.18.2.11
Total NFS requests resulting in object verification
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheRpcRecords		1.3.6.1.4.1.789.1.18.2.12
Total RPC records received
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheBWSavings		1.3.6.1.4.1.789.1.18.2.13
Bandwidth savings for NFS requests
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

nfsCacheHighBytesFromClients		1.3.6.1.4.1.789.1.18.2.14
Total NFS bytes received from clients. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheLowBytesFromClients		1.3.6.1.4.1.789.1.18.2.15
Total NFS bytes received from clients. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheHighBytesToClients		1.3.6.1.4.1.789.1.18.2.16
Total NFS bytes sent to clients. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheLowBytesToClients		1.3.6.1.4.1.789.1.18.2.17
Total NFS bytes sent to clients. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheHighBytesFromServers		1.3.6.1.4.1.789.1.18.2.18
Total NFS bytes received from servers. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheLowBytesFromServers		1.3.6.1.4.1.789.1.18.2.19
Total NFS bytes received from servers. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheHighBytesToServers		1.3.6.1.4.1.789.1.18.2.20
Total NFS bytes sent to servers. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheLowBytesToServers		1.3.6.1.4.1.789.1.18.2.21
Total NFS bytes sent to servers. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheHighTotalRequests		1.3.6.1.4.1.789.1.18.2.22
Total NFS requests received. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheLowTotalRequests		1.3.6.1.4.1.789.1.18.2.23
Total NFS requests received. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheHighHitRequests		1.3.6.1.4.1.789.1.18.2.24
Total NFS requests resulting in cache hits. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheLowHitRequests		1.3.6.1.4.1.789.1.18.2.25
Total NFS requests resulting in cache hits. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheHighMissRequests		1.3.6.1.4.1.789.1.18.2.26
Total NFS requests resulting in cache misses. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

nfsCacheLowMissRequests		1.3.6.1.4.1.789.1.18.2.27
Total NFS requests resulting in cache misses. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

enclosure		1.3.6.1.4.1.789.1.21.1
OBJECT IDENTIFIER

enclNumber		1.3.6.1.4.1.789.1.21.1.1
The number of storage enclosures in the storage subsystem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

enclTable		1.3.6.1.4.1.789.1.21.1.2
Display disk enclosure environmental information for fiber channel shelves and NearStore SCSI shelves. Shelves that do not support SCSI Enclosure Services, such as DEC Storage Shelf, Eurologic XL8 are not supported.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EnclEntry

enclEntry		1.3.6.1.4.1.789.1.21.1.2.1
Display disk enclosure (shelf) environmental information for the referenced disk enclosure.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	EnclEntry

enclIndex		1.3.6.1.4.1.789.1.21.1.2.1.1
A number that identifies this enclosure among the possible monitored enclosures. This number normally uniquely identifies one shelf within one boot, but may it change between boots. The number may also change within a boot if shelves are removed and added.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

enclContactState		1.3.6.1.4.1.789.1.21.1.2.1.2
The state of the communication between the filer or storage engine and the enclosure monitoring device in the enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	initializing(1), transitioning(2), active(3), inactive(4), reconfiguring(5), nonexistent(6)

enclChannelShelfAddr		1.3.6.1.4.1.789.1.21.1.2.1.3
The adapter number or switch name and the port number (together, called the channel), and shelf ID of this enclosure. Examples are 8a.1 and switch:5.1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclProductLogicalID		1.3.6.1.4.1.789.1.21.1.2.1.4
The logical identifier of this enclosure. This a form of the World-Wide Name (WWN).
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclProductID		1.3.6.1.4.1.789.1.21.1.2.1.5
The product ID of the shelf hardware module that provides the enclosure monitoring function. Example is LRC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclProductVendor		1.3.6.1.4.1.789.1.21.1.2.1.6
The name of the vendor of this enclosure. Example is Xyratex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclProductModel		1.3.6.1.4.1.789.1.21.1.2.1.7
The model name of this enclosure. Example is DiskShelf14.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclProductRevision		1.3.6.1.4.1.789.1.21.1.2.1.8
The revision number of this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclProductSerialNo		1.3.6.1.4.1.789.1.21.1.2.1.9
The serial number of this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclNumberDiskBays		1.3.6.1.4.1.789.1.21.1.2.1.10
The number of disk bays in this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

enclDisksPresent		1.3.6.1.4.1.789.1.21.1.2.1.11
The list of disks present by bay number in this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclPowerSuppliesMaximum		1.3.6.1.4.1.789.1.21.1.2.1.12
The maximum number of power supplies is this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

enclPowerSuppliesPresent		1.3.6.1.4.1.789.1.21.1.2.1.13
The list of power supplies present in the enclosure. Numbering is from left to right in their intended location in the shelf, while facing the supplies.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclPowerSuppliesSerialNos		1.3.6.1.4.1.789.1.21.1.2.1.14
The list of serial numbers of power supplies present in the enclosure. Not all shelves are able to report the power supply serial number. Communication errors may make the serial number unavailable. Numbering is from left to right in their intended location in the shelf, while facing the supplies.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclPowerSuppliesFailed		1.3.6.1.4.1.789.1.21.1.2.1.15
The list of failed power supplies in this enclosure, numbered as in enclPowerSuppliesPresent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclFansMaximum		1.3.6.1.4.1.789.1.21.1.2.1.16
The maximum number of fans or fan modules monitored by this enclosure. R100/R150 shelf power supply fans are not included in this number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

enclFansPresent		1.3.6.1.4.1.789.1.21.1.2.1.17
The list of fans or fan modules present and for which status is known in this enclosure. Fans are numbered left-to-right as facing the fans. R100/R150 shelf power supply fans are not included in this list.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclFansFailed		1.3.6.1.4.1.789.1.21.1.2.1.18
The list of failed fans or fan modules in this enclosure. Fans are numbered as described in enclFansPresent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclTempSensorsMaximum		1.3.6.1.4.1.789.1.21.1.2.1.19
The maximum number of temperature sensors monitored by this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

enclTempSensorsPresent		1.3.6.1.4.1.789.1.21.1.2.1.20
The list of temperature sensors present and for which status is known in this enclosure. Temperature sensors are numbered top-to-bottom and left-to-right, beginning with the front of the enclosure, then the rear, as the modules containing them are faced.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclTempSensorsOverTempFail		1.3.6.1.4.1.789.1.21.1.2.1.21
The list of temperature sensors reporting overtemperature failure in this enclosure. Sensors are numbered as in TempSensorsPresent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclTempSensorsOverTempWarn		1.3.6.1.4.1.789.1.21.1.2.1.22
The list of temperature sensors reporting overtemperature warning in this enclosure. Sensors are numbered as in TempSensorsPresent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclTempSensorsUnderTempFail		1.3.6.1.4.1.789.1.21.1.2.1.23
The list of temperature sensors reporting undertemperature failure in this enclosure. Sensors are numbered as in TempSensorsPresent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclTempSensorsUnderTempWarn		1.3.6.1.4.1.789.1.21.1.2.1.24
The list of temperature sensors reporting undertemperature warning in this enclosure. Sensors are numbered as in TempSensorsPresent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclTempSensorsCurrentTemp		1.3.6.1.4.1.789.1.21.1.2.1.25
The list of temperatures reported by all temperature sensors in the enclosure, including the ambient temperature. Sensors are numbered as in TempSensorsPresent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclTempSensorsOverTempFailThr		1.3.6.1.4.1.789.1.21.1.2.1.26
The list of overtemperature failure thresholds for all temperature sensors in the enclosure. Sensors are numbered as in TempSensorsPresent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclTempSensorsOverTempWarnThr		1.3.6.1.4.1.789.1.21.1.2.1.27
The list of overtemperature warning thresholds for all temperature sensors in the enclosure. Sensors are numbered as in TempSensorsPresent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclTempSensorsUnderTempFailThr		1.3.6.1.4.1.789.1.21.1.2.1.28
The list of undertemperature failure thresholds for all temperature sensors in the enclosure. Sensors are numbered as in TempSensorsPresent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclTempSensorsUnderTempWarnThr		1.3.6.1.4.1.789.1.21.1.2.1.29
The list of undertemperature warning thresholds for all temperature sensors in the enclosure. Sensors are numbered as in TempSensorsPresent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclElectronicsMaximum		1.3.6.1.4.1.789.1.21.1.2.1.30
The number of enclosure services electronics modules that it is possible for this enclosure to detect and/or monitor.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

enclElectronicsPresent		1.3.6.1.4.1.789.1.21.1.2.1.31
The list those enclosure services electronics modules present in this enclosure. Numbering is from left-to-right or top-to-bottom in their intended location in the shelf, while facing the electronics modules. It is normal for the R200 FC-AT module to be reported as the second module.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclElectronicsSerialNos		1.3.6.1.4.1.789.1.21.1.2.1.32
The list of serial numbers of the enclosure services electronics modules present in this enclosure. The order follows that of enclElectronicsPresent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

enclElectronicsFailed		1.3.6.1.4.1.789.1.21.1.2.1.33
The list of failed electronics elements. Valid only if enclElectronicsPresent shows that some are present.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

netInterfaces		1.3.6.1.4.1.789.1.22.1
OBJECT IDENTIFIER

netifNumber		1.3.6.1.4.1.789.1.22.1.1
The number of network interfaces (regardless of their current state) present on this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

netifTable		1.3.6.1.4.1.789.1.22.1.2
A list of interface entries. The number of entries is given by the value of netifNumber.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NetIfEntry

netifEntry		1.3.6.1.4.1.789.1.22.1.2.1
An interface entry containing objects at the subnetwork layer and below for a particular interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NetIfEntry

netifIndex		1.3.6.1.4.1.789.1.22.1.2.1.1
A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

netifDescr		1.3.6.1.4.1.789.1.22.1.2.1.2
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ifHighInOctets		1.3.6.1.4.1.789.1.22.1.2.1.3
The total number of octets received on the interface, including framing characters. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifLowInOctets		1.3.6.1.4.1.789.1.22.1.2.1.4
The total number of octets received on the interface, including framing characters. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifHighInUcastPkts		1.3.6.1.4.1.789.1.22.1.2.1.5
The number of subnetwork-unicast packets delivered to a higher-layer protocol. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifLowInUcastPkts		1.3.6.1.4.1.789.1.22.1.2.1.6
The number of subnetwork-unicast packets delivered to a higher-layer protocol. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifHighInNUcastPkts		1.3.6.1.4.1.789.1.22.1.2.1.7
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifLowInNUcastPkts		1.3.6.1.4.1.789.1.22.1.2.1.8
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifHighInDiscards		1.3.6.1.4.1.789.1.22.1.2.1.9
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifLowInDiscards		1.3.6.1.4.1.789.1.22.1.2.1.10
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifHighInErrors		1.3.6.1.4.1.789.1.22.1.2.1.11
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifLowInErrors		1.3.6.1.4.1.789.1.22.1.2.1.12
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifHighInUnknownProtos		1.3.6.1.4.1.789.1.22.1.2.1.13
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifLowInUnknownProtos		1.3.6.1.4.1.789.1.22.1.2.1.14
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifHighOutOctets		1.3.6.1.4.1.789.1.22.1.2.1.15
The total number of octets transmitted out of the interface, including framing characters. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifLowOutOctets		1.3.6.1.4.1.789.1.22.1.2.1.16
The total number of octets transmitted out of the interface, including framing characters. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifHighOutUcastPkts		1.3.6.1.4.1.789.1.22.1.2.1.17
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifLowOutUcastPkts		1.3.6.1.4.1.789.1.22.1.2.1.18
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifHighOutNUcastPkts		1.3.6.1.4.1.789.1.22.1.2.1.19
The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifLowOutNUcastPkts		1.3.6.1.4.1.789.1.22.1.2.1.20
The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifHighOutDiscards		1.3.6.1.4.1.789.1.22.1.2.1.21
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifLowOutDiscards		1.3.6.1.4.1.789.1.22.1.2.1.22
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifHighOutErrors		1.3.6.1.4.1.789.1.22.1.2.1.23
The number of outbound packets that could not be transmitted because of errors. This object returns the most significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ifLowOutErrors		1.3.6.1.4.1.789.1.22.1.2.1.24
The number of outbound packets that could not be transmitted because of errors. This object returns the least significant 32 bits of the 64 bit unsigned integer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

userDefined		2
A polling-style trap built using the 'snmp traps' command on the filer.
TRAP-TYPE

dhmNoticeDegradedIO		6
Disk Health Monitor - Reported a Disk Degraded-I/O Event
TRAP-TYPE

dhmNoticePFAEvent		7
Disk Health Monitor - Reported a Disk Predictive-Failure Event
TRAP-TYPE

emergencyTrap		11
A user-defined trap indicating an extremely urgent situation, usually indicating that the system has failed and is shutting down.
TRAP-TYPE

alertTrap		12
A user-defined trap indicating a condition that should be corrected immediately, such as a failed disk.
TRAP-TYPE

criticalTrap		13
A user-defined trap indicating a critical condition, such as a hard device error.
TRAP-TYPE

errorTrap		14
A user-defined trap indicating an error condition, such as a mistake in a configuration file.
TRAP-TYPE

warningTrap		15
A user-defined trap indicating a condition which is not an error, but which may require special handling.
TRAP-TYPE

notificationTrap		16
A user-defined trap meant to provide notification, such as an hourly uptime message.
TRAP-TYPE

informationalTrap		17
A user-defined trap used for informational purposes.
TRAP-TYPE

dbgTrap		18
A user-defined trap used for debugging purposes. This trap was previously mis-documented as being trap number 17, with the name debugTrap. It has always, actually, been trap 18. The name change is to avoid issues with environments that already have a record for debugTrap.
TRAP-TYPE

diskFailedShutdown		21
System is shutting down because the system has been running in degraded mode for 24 hours. The trap includes a string describing the failed disk.
TRAP-TYPE

diskFailed		22
One or more disks failed. The trap includes a string describing the failed disk(s).
TRAP-TYPE

diskRepaired		26
The failed disks have been repaired. This trap is a placeholder - it is not currently sent by ONTAP.
TRAP-TYPE

fanFailureShutdown		31
Critical chassis or cpu fans have failed and the system is shutting down.
TRAP-TYPE

fanFailed		33
One or more chassis fans failed. The trap includes a string describing the failed fan(s).
TRAP-TYPE

fanWarning		35
One or more chassis or cpu fans are in warning state. The trap includes a string describing the fan(s) in the warning state.
TRAP-TYPE

fanRepaired		36
All fans are repaired.
TRAP-TYPE

powerSupplyFailureShutdown		41
Critical power supplies or power rails failed and the system is shutting down.
TRAP-TYPE

powerSupplyFailed		43
One or more redundant power supplies failed. Include in the trap a string describing the failed power supply(ies).
TRAP-TYPE

powerSupplyWarning		45
One or more power supplies or power rails in warning state. Include in the trap a string describing the power supply(ies) or the power rail(s) in the warning state.
TRAP-TYPE

powerSupplyRepaired		46
Previously-failed power supplies or power rails have been repaired.
TRAP-TYPE

cpuTooBusy		55
CPU utilization exceeds 90%. This trap is not enabled by default. To enable this trap set the registry entry options.monitor.cpu.enable to on. Note that as the threshold for this trap is checked once a minute it is possible to receive multiple instances of this trap in a short time.
TRAP-TYPE

cpuOk		56
CPU utilization has dropped back below 90%. This trap is a placeholder - it is not currently sent by ONTAP.
TRAP-TYPE

nvramBatteryDischarged		62
The NVRAM battery is fully discharged.
TRAP-TYPE

nvramBatteryLow		63
The charge in the NVRAM battery is low.
TRAP-TYPE

clusterNodeFailed		72
A node in a Cluster FailOver configuration failed. Its partner will assume service for the failed node.
TRAP-TYPE

clusterNodeTakenOver		75
The partner has taken over for a failed cluster node.
TRAP-TYPE

clusterNodeRepaired		76
A cluster node has resumed operation.
TRAP-TYPE

volumeFull		82
At least one volume is more than 98% full. The string sent with the trap gives the name of the volume or volumes which exceed the threshold.
TRAP-TYPE

volumeNearlyFull		85
At least one volume is more than 95% full. The string sent with the trap gives the name of the volume or volumes which exceed the threshold.
TRAP-TYPE

volumeRepaired		86
All volumes are now under 95% full.
TRAP-TYPE

overTempShutdown		91
System temperature is too high to continue operating. The system is shutting down.
TRAP-TYPE

overTemp		95
System temperature is too high and in the warning level.
TRAP-TYPE

overTempRepaired		96
System temperature has returned to an acceptable value.
TRAP-TYPE

shelfFault		103
A disk storage shelf reported a fault, probably due to a problem with drive placement, fans, power, or temperature.
TRAP-TYPE

shelfRepaired		106
A previously-reported shelf fault is now corrected.
TRAP-TYPE

globalStatusNonRecoverable		111
The appliance's overall status changed to 'nonRecoverable', indicating a problem so severe that the appliance is shutting down.
TRAP-TYPE

globalStatusCritical		113
The appliance's overall status changed to 'critical', indicating a problem that needs immediate attention.
TRAP-TYPE

globalStatusNonCritical		115
The appliance's overall status changed to 'nonCritical', indicating a problem that needs attention.
TRAP-TYPE

globalStatusOk		116
The appliance's overall status returned to normal.
TRAP-TYPE

softQuotaExceeded		126
A user has exceeded their soft quota limit.
TRAP-TYPE

softQuotaNormal		127
A user is safely back under their soft quota limit.
TRAP-TYPE

autosupportSendError		134
Unable to send autosupport. The trap includes a string describing the reason for the failure.
TRAP-TYPE

autosupportConfigurationError		135
Autosupport may be configured incorrectly. The trap includes a string describing the mis-configuration.
TRAP-TYPE

autosupportSent		136
Autosupport was sent successfully.
TRAP-TYPE

upsLinePowerOff		142
UPS: Input line power has failed and UPS is now on battery.
TRAP-TYPE

upsBatteryCritical		143
UPS: Battery is nearly exhausted, starting graceful shutdown.
TRAP-TYPE

upsShuttingDown		144
UPS: Shutting down now: Time left on battery is exhuasted.
TRAP-TYPE

upsBatteryWarning		145
UPS: Warning: Time left on battery is getting critical.
TRAP-TYPE

upsLinePowerRetored		146
UPS: Input line power has been restored and UPS is now off battery.
TRAP-TYPE

appEmergency		151
The application encountered an extremely urgent situation and requires an immediate response.
TRAP-TYPE

appAlert		152
The application is in a condition that should be corrected immediately.
TRAP-TYPE

appCritical		153
The application encountered a critical condition.
TRAP-TYPE

appError		154
The application encountered an error condition.
TRAP-TYPE

appWarning		155
The application is in a condition which is not an error, but which may require special handling.
TRAP-TYPE

appNotice		156
The application is notifing of a certain event.
TRAP-TYPE

appInfo		157
The application's message is meant for informational purposes.
TRAP-TYPE

appTrap		158
The application requires to be debugged.
TRAP-TYPE

alfFilewrap		162
The internal audit file has wrapped. You are currently losing event records.Warning the user
TRAP-TYPE

alfFileSaved		166
The internal audit log has been autosaved to an external evt file. Notifying the user.
TRAP-TYPE

alfFileNearlyFull		167
The internal audit log file is nearly full. The file is going to wrap. Notifying the user
TRAP-TYPE

quotaExceeded		176
One of the quota limits has been exceeded. The trap includes a string describing the specific event which triggered the trap. The string is structured in the following form: Quota Event: status=exceeded, type={hard|soft|threshold}, user={username}, volume={volume}, limit_item={files|disk}, limit_value={#files|#kilobytes} [ , treeid={tree-id} ] [ , vfiler={vfiler} ] An example of a complete message would be: Quota Event: status=exceeded, type=soft, user=admin, volume=vol1, limit_item=disk, limit_value=1000000, treeid=8 Additional key=value items may, in the future, be appended to this message.
TRAP-TYPE

quotaNormal		177
One of the quota limits has gone back down to a normal level. The trap includes a string describing the specific event which triggered the trap. The string is structured in the following form: Quota Event: status=normal, type={hard|soft|threshold}, user={username}, volume={volume}, limit_item={files|disk}, limit_value={#files|#kilobytes} [ , treeid={tree-id} ] [ , vfiler={vfiler} ] An example of a complete message would be: Quota Event: status=normal, type=soft, user=admin, volume=vol1, limit_item=disk, limit_value=1000000, treeid=8 Additional key=value items may, in the future, be appended to this message.
TRAP-TYPE

waflDirFull		187
The directory has been filled to its limit
TRAP-TYPE

eccSummary		192
Memory ECC: number of new correctable ECC errors
TRAP-TYPE

eccMasked		195
Memory ECC: High frequency of ECC errors
TRAP-TYPE

ftpdError		204
Ftp daemon: service stopped
TRAP-TYPE

ftpdMaxConnNotice		206
Ftp daemon: number of connections hits maximum number
TRAP-TYPE

ftpdMaxConnThresholdNotice		216
Ftp daemon: number of connections nearly hits maximum number
TRAP-TYPE

scsitgtFCPLinkBreak		222
SCSI Target: Link Break on FCP adapter
TRAP-TYPE

scsitgtPartnerPathMisconfigured		224
SCSI Target: FCP Partner Path Misconfigured
TRAP-TYPE

scsitgtThrottleNotice		226
SCSI Target: Throttle limit event notification
TRAP-TYPE

vifPrimaryLinkFailed		237
Vif: The primary Interface on a Single mode vif has failed
TRAP-TYPE

vifAllLinksFailed		238
Vif: All the links of the vif have failed
TRAP-TYPE

vfStopped		245
A vFiler has stopped.
TRAP-TYPE

vfStarted		246
A vFiler has started.
TRAP-TYPE

vscanVirusDetectedError		254
VScan: A virus scanner has detected a virus on the Filer
TRAP-TYPE

vscanDisConnection		255
VScan: A virus scanner has dropped its connection from the Filer
TRAP-TYPE

vscanConfigurationChange		256
VScan: There has been a change to the vscan configuration
TRAP-TYPE

vscanConnection		257
VScan: A virus scanner has made a connection to the Filer
TRAP-TYPE

vscanServerUpgrade		266
VScan: The Vscan server has been upgraded
TRAP-TYPE

volumeRestrictedByMirrorBigIo		272
A volume that experienced a medium error during reconstruction is restricted and marked wafl-inconsistent, but starting wafliron has failed. This trap is issued to alert operator that a volume is not accessible and wafliron must be started to allow access to it.
TRAP-TYPE

volumeInconsistentUmount		274
This trap is issued when we unmount a volume due to an inconsistency.
TRAP-TYPE

volumeStateChanged		275
Volume is being taken offline or being restricted. The string sent with trap specifies name of affected volume and its state.
TRAP-TYPE

volumeOnline		276
Volume is online now. The string sent with trap specifies name of volume which is online now.
TRAP-TYPE

rmcCardNeedsReplacement		283
Remote Management Controller card needs replacement. The trap includes a string specifying the reason for replacement
TRAP-TYPE

rmcCardMissingCables		284
Remote Management Controller card is missing its internal cable, or LAN cable or power supply cable. The trap includes a string specifing the missing component.
TRAP-TYPE

volumeRemoteUnreachable		294
Local volume encountered an error while communicating to remote volume.
TRAP-TYPE

volumeRemoteOk		296
The communication between remote volume and local volume returned to normal.
TRAP-TYPE

volumeRemoteRestored		297
The data on remote volume has been fully restored to local volume.
TRAP-TYPE

volumeRemoteRestoreBegin		298
The data on remote volume has started being restored to local volume by Restore-on-Demand.
TRAP-TYPE

volumeRestrictedRootConflict		304
Volume is restricted due to a root volume conflict. The string sent with trap specifies name of conflicting volume which is being restricted.
TRAP-TYPE

volumeOfflineTooBig		314
Volume can not be brought online because its raw size is larger than maximum allowed size. The string sent with trap specifies name of affected volume and its raw size, and maximum allowed size.
TRAP-TYPE

volumeOffline		324
Volume is being taken offline. The string sent with trap specifies name of affected volume and reason for being taken offline.
TRAP-TYPE

volumeRestricted		334
Volume is being restricted. The string sent with trap specifies name of affected volume and reason for being restricted.
TRAP-TYPE

volumeDegradedDirty		344
Volume is degraded and has dirty parity. WAFL_check must be run on this volume before it can be brought online. The string sent with trap specifies name of affected volume.
TRAP-TYPE

volumeError		354
This trap is issued when a volume can not be brought online due to an error. The string sent with trap specifies name of affected volume and error description.
TRAP-TYPE

snapmirrorSyncFailed		364
Synchronous SnapMirror failed and went into asynchronous mode.
TRAP-TYPE

snapmirrorSyncOk		366
Synchronous SnapMirror went into synchronous mode.
TRAP-TYPE

chassisTemperatureShutdown		371
The chassis temperature is extreme. The appliance has initiated a shutdown to protect itself. The operating environment should be monitored and corrected before restarting the appliance.
TRAP-TYPE

chassisTemperatureWarning		372
The chassis temperature is either too high or too low. The temperature should be monitored and, if possible, corrected.
TRAP-TYPE

chassisTemperatureUnknown		375
The chassis temperature is unknown, because reading can't be obtained from the chassis temperature sensor.
TRAP-TYPE

chassisTemperatureOk		376
The chassis temperature is OK.
TRAP-TYPE

chassisCPUFanStopped		381
One or more CPU fans have stopped. The appliance has initiated a shutdown to protect itself. A new motherboard may be required to correct the fan. Contact Network Appliance for direction.
TRAP-TYPE

chassisCPUFanSlow		383
A CPU fan is spinning too slowly. A new motherboard may be required to correct the fan. Contact Network Appliance for direction.
TRAP-TYPE

chassisCPUFanOk		386
All CPU fan(s) are properly functioning.
TRAP-TYPE

chassisPowerSuppliesFailed		391
Multiple chassis power supplies failed.
TRAP-TYPE

chassisPowerSupplyDegraded		392
One or more chassis power supplies are degraded. A description of the degraded state has been logged to the console and message log file.
TRAP-TYPE

chassisPowerSupplyFailed		393
One chassis power supply failed.
TRAP-TYPE

chassisPowerSupplyRemoved		394
One or more chassis power supplies are removed.
TRAP-TYPE

chassisPowerSupplyOff		395
One or more chassis power supplies are off.
TRAP-TYPE

chassisPowerSuppliesOk		396
The chassis power supplies are all functioning properly.
TRAP-TYPE

chassisPowerSupplyOk		397
This chassis power supply is functioning properly.
TRAP-TYPE

chassisPowerDegraded		403
The power within the chassis is degraded. A description of the degraded state has been logged to the console and message log file.
TRAP-TYPE

chassisPowerOk		406
The power within the chassis is functioning properly.
TRAP-TYPE

chassisFanDegraded		412
A chassis fan has been degraded.
TRAP-TYPE

chassisFanRemoved		413
A chassis fan FRU has been removed.
TRAP-TYPE

chassisFanStopped		414
One or more chassis fans have stopped.
TRAP-TYPE

chassisFanWarning		415
One or more chassis fans is spinning slowly or too fast.
TRAP-TYPE

chassisFanOk		416
All chassis fans are functioning properly.
TRAP-TYPE

writeVerificationFailed		424
A write has failed a verification test on a SnapValidator enabled volume.
TRAP-TYPE

domainControllerDisconnect		435
A CIFS domain controller connection to the filer has failed.
TRAP-TYPE

plexFailed		444
This trap is issued when one plex of a mirrored traditional volume or aggregate is failed. The string sent with this trap specifies name of affected plex or mirrored traditional volume or aggregate.
TRAP-TYPE

plexOffline		454
This trap is issued when a plex becomes offline. The string sent with this trap specifies name of affected plex or mirrored traditional volume or aggregate.
TRAP-TYPE

maxDirSizeAlert		482
A directory has reached it's maxdirsize limit. Either increase the maxdirsize or clean up the directory.
TRAP-TYPE

maxDirSizeWarning		485
A directory is getting close to it's maxdirsize limit. Either increase the maxdirsize or clean up the directory.
TRAP-TYPE