NETSTAR-MIB
File:
NETSTAR-MIB.mib (40375 bytes)
Imported modules
Imported symbols
Defined Types
GrPortCardEntry |
|
SEQUENCE |
|
|
|
|
grPortCardSlot |
INTEGER |
|
|
grPortCardHWtype |
INTEGER |
|
|
grPortCardCurrentState |
INTEGER |
|
GrAtmV1VcEntry |
|
SEQUENCE |
|
|
|
|
grAtmV1VcIfIndex |
INTEGER |
|
|
grAtmV1VcVpi |
INTEGER |
|
|
grAtmV1VcVci |
INTEGER |
|
|
grAtmV1VcAal |
INTEGER |
|
|
grAtmV1VcDestIfIndex |
INTEGER |
|
|
grAtmV1VcDestVpi |
INTEGER |
|
|
grAtmV1VcDestVci |
INTEGER |
|
|
grAtmV1VcProtocol |
INTEGER |
|
|
grAtmV1VcRateq |
INTEGER |
|
|
grAtmV1VcType |
INTEGER |
|
GrAtmV1RateqEntry |
|
SEQUENCE |
|
|
|
|
grAtmV1RateqIfIndex |
INTEGER |
|
|
grAtmV1RateqIndex |
INTEGER |
0..7 |
|
grAtmV1RateqRate |
INTEGER |
|
|
grAtmV1RateqState |
INTEGER |
|
GrAtmV1NetToVcEntry |
|
SEQUENCE |
|
|
|
|
grAtmV1NetToVcIfIndex |
INTEGER |
|
|
grAtmV1NetToVcNetAddress |
IpAddress |
|
|
grAtmV1NetToVcVpi |
INTEGER |
|
|
grAtmV1NetToVcVci |
INTEGER |
|
|
grAtmV1NetToVcState |
INTEGER |
|
GrThreshPollEntry |
|
SEQUENCE |
|
|
|
|
grTPCurrentCount |
Counter |
|
|
grTPPreviousCount |
Counter |
|
|
grTPCurrentCountUpper |
Counter |
|
|
grTPPreviousCountUpper |
Counter |
|
Defined Values
netstar |
1.3.6.1.4.1.1080 |
OBJECT IDENTIFIER |
|
|
|
gr2 |
1.3.6.1.4.1.1080.1.3 |
OBJECT IDENTIFIER |
|
|
|
grf |
1.3.6.1.4.1.1080.1.4 |
OBJECT IDENTIFIER |
|
|
|
grf400 |
1.3.6.1.4.1.1080.1.4.1 |
OBJECT IDENTIFIER |
|
|
|
grf1600 |
1.3.6.1.4.1.1080.1.4.2 |
OBJECT IDENTIFIER |
|
|
|
grChassis |
1.3.6.1.4.1.1080.1.1.1 |
OBJECT IDENTIFIER |
|
|
|
grHIPPI |
1.3.6.1.4.1.1080.1.1.2 |
OBJECT IDENTIFIER |
|
|
|
grFDDI4 |
1.3.6.1.4.1.1080.1.1.3 |
OBJECT IDENTIFIER |
|
|
|
grAtmV1 |
1.3.6.1.4.1.1080.1.1.4 |
OBJECT IDENTIFIER |
|
|
|
grAtmUNI |
1.3.6.1.4.1.1080.1.1.5 |
OBJECT IDENTIFIER |
|
|
|
grPingLog |
1.3.6.1.4.1.1080.1.1.7 |
OBJECT IDENTIFIER |
|
|
|
grAtmp |
1.3.6.1.4.1.1080.1.1.8 |
OBJECT IDENTIFIER |
|
|
|
grPowerSupplyStatus |
1.3.6.1.4.1.1080.1.1.1.1 |
A sum of bits:
1 = Power supply A is operational
2 = Power supply B is operational
3 = Power supplies A and B are operational |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
grTempStatus |
1.3.6.1.4.1.1080.1.1.1.2 |
The temperature sensed by the Routing Manager Board.
Over-temp status means that the temperature has
exceeded the maximum temperature threshold. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
normal(1), over-temp(2) |
|
grFanStatus |
1.3.6.1.4.1.1080.1.1.1.3 |
A sum of bits:
1 = Fan tray installed
2 = Fan 1 operational
4 = Fan 2 operational
8 = Fan 3 operational
16 = Fan 4 operational
32 = Fan 5 operational
64 = Fan 6 operational
The expected value is based upon the actual number
of fans installed and varies from chassis to chassis
as shown below:
GR-2 = 127 (six fans)
GRF400 = 15 (three fans)
GRF1600 = 7 (two fans)
A value of zero indicates that the fan tray has been
removed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
grPortCardNumber |
1.3.6.1.4.1.1080.1.1.1.4 |
The number of portcards installed in the system. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..64 |
|
grPortCardTable |
1.3.6.1.4.1.1080.1.1.1.5 |
A list of PortCard entries. The number of entries
shall not exceed the value of grPortCardNumber. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
GrPortCardEntry |
|
grPortCardEntry |
1.3.6.1.4.1.1080.1.1.1.5.1 |
A PortCard entry containing information common to
a given port card. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
GrPortCardEntry |
|
|
grPortCardSlot |
1.3.6.1.4.1.1080.1.1.1.5.1.1 |
The port card slot number, starting at zero. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..63 |
|
grPortCardHWtype |
1.3.6.1.4.1.1080.1.1.1.5.1.2 |
GigaRouter Port Card hardware type. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(0), hippi(3), fddi(4), rmb(6), atm(7), hssi(8), ibmSP(9), atmq-oc3(10), fddiq(11), atm-oc12(12), ethernet(13), sonet-oc3(14), cddi(15) |
|
grPortCardCurrentState |
1.3.6.1.4.1.1080.1.1.1.5.1.3 |
The instantaneous state of port card operation. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
empty(1), power-up(2), boot-requested(3), dumping(4), loading(5), configuring(6), running(7), not-responding(8), panic(9), held-reset(10), other(99) |
|
grGatedStatus |
1.3.6.1.4.1.1080.1.1.1.6 |
The instantaneous state of gated: running or
not running. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
running(1), not-running(2) |
|
grTransportMethod |
1.3.6.1.4.1.1080.1.1.1.7 |
This defines the transport method used to
transfer configuration files between the
GRF and a ftp/tftp server |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ftp(0), tftp(1) |
|
grFTPUserName |
1.3.6.1.4.1.1080.1.1.1.8 |
This defines the user login name. This user
login name will be used to log into the ftp
server to transfer the configuration files. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
grFTPPassword |
1.3.6.1.4.1.1080.1.1.1.9 |
This defines the password for the ftp user. This
password will be used to log into the ftp server
to transfer the configuration files. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
grServerName |
1.3.6.1.4.1.1080.1.1.1.10 |
This defines the ftp/tftp server name to be used
for a Backup/Compare/Restore operation. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
grFileName |
1.3.6.1.4.1.1080.1.1.1.11 |
This defines the file name to be used for a
Backup/Compare/Restore operation. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
grLastOperation |
1.3.6.1.4.1.1080.1.1.1.12 |
This describes the last Backup/Compare/Restore
operation that was executed on the system. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
grStatusMsg |
1.3.6.1.4.1.1080.1.1.1.13 |
This message contains the status information
associated with the last Backup/Compare/Restore
operation. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
grBackup |
1.3.6.1.4.1.1080.1.1.1.14 |
The setting of this to yes starts the configuration
Backup operation. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
no(0), yes(1) |
|
grCompare |
1.3.6.1.4.1.1080.1.1.1.15 |
The setting of this to yes starts the configuration
Compare operation. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
no(0), yes(1) |
|
grRestore |
1.3.6.1.4.1.1080.1.1.1.16 |
The setting of this to yes starts the configuration
Restore operation. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
no(0), yes(1) |
|
grAtmV1VcTable |
1.3.6.1.4.1.1080.1.1.4.1 |
A list of PortCard ATM Interface entries. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
GrAtmV1VcEntry |
|
grAtmV1VcEntry |
1.3.6.1.4.1.1080.1.1.4.1.1 |
A grAtmV1Vc entry containing attributes of an ATM
virtual connection. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
GrAtmV1VcEntry |
|
|
grAtmV1VcIfIndex |
1.3.6.1.4.1.1080.1.1.4.1.1.1 |
The interface on which this entry's PVC
exists. The interface identified by a
particular value of this index is the same
interface as identified by the same value of
ifIndex. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
grAtmV1VcVpi |
1.3.6.1.4.1.1080.1.1.4.1.1.2 |
The Virtual Path Identifier (VPI) value of this
virtual connection. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
grAtmV1VcVci |
1.3.6.1.4.1.1080.1.1.4.1.1.3 |
The Virtual Connection Identifier (VCI) value of this
virtual connection. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
grAtmV1VcAal |
1.3.6.1.4.1.1080.1.1.4.1.1.4 |
The ATM Adaptation Layer (AAL) protocol to be
used on this virtual connection. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
aal3(1), aal5(2), other(3) |
|
grAtmV1VcProtocol |
1.3.6.1.4.1.1080.1.1.4.1.1.5 |
The upper-layer protocol to be used on this virtual
connection. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ip-llc(1), ip-null(2), uni(3), diag0(4), diag1(5), raw(6), other(7) |
|
grAtmV1VcDestIfIndex |
1.3.6.1.4.1.1080.1.1.4.1.1.6 |
The IfIndex value for the interface to which this
virtual connection is attached, if any. This object
is meaningful only when the grAtmV1VcProtocol value
is diag0(4), diag1(5) or raw(6). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
grAtmV1VcDestVpi |
1.3.6.1.4.1.1080.1.1.4.1.1.7 |
The VPI value for the Destination virtual connection
to which this VC is attached, if any. This object
is meaningful only when the grAtmV1VcProtocol value
is diag0(4), diag1(5) or raw(6). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
grAtmV1VcDestVci |
1.3.6.1.4.1.1080.1.1.4.1.1.8 |
The VCI value for the Destination virtual connection
to which this VC is attached, if any. This object
is meaningful only when the grAtmV1VcProtocol value
is diag0(4), diag1(5) or raw(6). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
grAtmV1VcRateq |
1.3.6.1.4.1.1080.1.1.4.1.1.9 |
The number of the rate queue to which this
virtual connection is assigned. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
grAtmV1VcType |
1.3.6.1.4.1.1080.1.1.4.1.1.10 |
The type of virtual connection. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), invalid(2), permanent(3), switched(4) |
|
grAtmV1RateqEntry |
1.3.6.1.4.1.1080.1.1.4.3.1 |
A grAtmV1Rateq entry containing attributes of an ATM
interface. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
GrAtmV1RateqEntry |
|
|
grAtmV1RateqIfIndex |
1.3.6.1.4.1.1080.1.1.4.3.1.1 |
The interface on which this entry's rate
queue exists. The interface identified by a
particular value of this index is the same
interface as identified by the same value of
ifIndex. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
grAtmV1RateqIndex |
1.3.6.1.4.1.1080.1.1.4.3.1.2 |
A number identifying the rate queue within the
Interface. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
grAtmV1RateqRate |
1.3.6.1.4.1.1080.1.1.4.3.1.3 |
The maximum data rate allocated to this rate queue,
in decimal thousands of bits per second. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
grAtmV1RateqState |
1.3.6.1.4.1.1080.1.1.4.3.1.4 |
The operational state of the rate queue. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), inactive(2) |
|
grAtmV1NetToVcTable |
1.3.6.1.4.1.1080.1.1.4.4 |
A list of PortCard ATM IP address to virtual
channel entries. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
GrAtmV1NetToVcEntry |
|
grAtmV1NetToVcEntry |
1.3.6.1.4.1.1080.1.1.4.4.1 |
A grAtmV1NetToVc entry representing a mapping from an IP
address to an ATM virtual channel. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
GrAtmV1NetToVcEntry |
|
|
grAtmV1NetToVcIfIndex |
1.3.6.1.4.1.1080.1.1.4.4.1.1 |
The interface on which this entry's equivalence
is effective. The interface identified by a
particular value of this index is the same
interface as identified by the same value of
ifIndex. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
grAtmV1NetToVcVpi |
1.3.6.1.4.1.1080.1.1.4.4.1.3 |
The Virtual Path Identifier (VCI) of this
virtual channel. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
grAtmV1NetToVcVci |
1.3.6.1.4.1.1080.1.1.4.4.1.4 |
The Virtual Channel Identifier (VCI) of this
virtual channel. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
grAtmV1NetToVcState |
1.3.6.1.4.1.1080.1.1.4.4.1.5 |
The operational state of this entry. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), inactive(2) |
|
grThreshPollTable |
1.3.6.1.4.1.1080.1.1.6.3 |
A list of current and previous threshpoll counter
entries. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
GrThreshPollEntry |
|
grThreshPollEntry |
1.3.6.1.4.1.1080.1.1.6.3.1 |
A grThreshpoll entry containing current and
previous threshold counters. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
GrThreshPollEntry |
|
|
grTPCurrentCount |
1.3.6.1.4.1.1080.1.1.6.3.1.1 |
The current value of a counter being polled
by the threshold poller. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
grTPPreviousCount |
1.3.6.1.4.1.1080.1.1.6.3.1.2 |
The previous value of a counter being polled
by the threshold poller. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
grTPCurrentCountUpper |
1.3.6.1.4.1.1080.1.1.6.3.1.3 |
The upper 32 bits of the current value of a
64 bit counter being polled
by the threshold poller. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
grTPPreviousCountUpper |
1.3.6.1.4.1.1080.1.1.6.3.1.4 |
The upper 32 bits of the previous value of a
64 bit counter being polled
by the threshold poller. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
grPingLogTable |
1.3.6.1.4.1.1080.1.1.7.1 |
A list of current and previous threshpoll counter
entries. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
GrPingLogEntry |
|
grPingLogEntry |
1.3.6.1.4.1.1080.1.1.7.1.1 |
A grThreshpoll entry containing current and
previous threshold counters. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
GrPingLogEntry |
|
|
grPLDevDownMsg |
1.3.6.1.4.1.1080.1.1.7.1.1.1 |
The message sent when pinglog detects a device
down. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
coldStart |
0 |
A coldStart trap signifies that the sending
protocol entity is reinitializing itself such
that the agent's configuration or the protocol
entity implementation may be altered. |
TRAP-TYPE |
|
|
|
warmStart |
1 |
A warmStart trap signifies that the sending
protocol entity is reinitializing itself such
that neither the agent configuration nor the
protocol entity implementation is altered. |
TRAP-TYPE |
|
|
|
linkDown |
2 |
A linkDown trap signifies that the sending
protocol entity recognizes a failure in one of
the communication links represented in the
agent's configuration. |
TRAP-TYPE |
|
|
|
linkUp |
3 |
A linkUp trap signifies that the sending
protocol entity recognizes that one of the
communication links represented in the agent's
configuration has come up. |
TRAP-TYPE |
|
|
|
authenticationFailure |
4 |
An authenticationFailure trap signifies that
the sending protocol entity is the addressee
of a protocol message that is not properly
authenticated. While implementations of the
SNMP must be capable of generating this trap,
they must also be capable of suppressing the
emission of such traps via an implementation-
specific mechanism. |
TRAP-TYPE |
|
|
|
grPowerSupplyFailure |
1 |
The trap that is issued when one of the power
supplies is removed from the system or fails
in in some way. |
TRAP-TYPE |
|
|
|
grOverTemp |
2 |
The trap that is issued when the system
temperature exceeds the maximum temperature
threshold. |
TRAP-TYPE |
|
|
|
grFanFailure |
3 |
The trap that is issued when any fan's speed
falls below the minimum threshold value or the
fan tray is removed from the system. |
TRAP-TYPE |
|
|
|
grCardDown |
4 |
The trap that is issued when the Port Card's
state changes from running(7) to any other state. |
TRAP-TYPE |
|
|
|
grCardUp |
5 |
The trap that is issued when the Port Card's
state changes to running(7) to any other state. |
TRAP-TYPE |
|
|
|
grSONETLossOfFrame |
6 |
The trap issued when the SONET receive hardware
detects a Loss Of Frame Failure (LOF). |
TRAP-TYPE |
|
|
|
grSONETLossOfSignal |
7 |
The trap issued when the SONET receive hardware
detects Loss of Signal (LOS). |
TRAP-TYPE |
|
|
|
grSONETVTLossOfPointer |
9 |
The trap issued when the SONET receive hardware
detects VT Loss of Pointer (VT LOP). |
TRAP-TYPE |
|
|
|
grSONETLineRemoteDefectIndication |
13 |
The trap issued when the SONET receive hardware
detects a Line Remote Defect Indication (RDI,
also known as Line FERF). |
TRAP-TYPE |
|
|
|
grSONETVTPathRemoteDefectIndication |
14 |
The trap issued when the SONET receive hardware
detects a VT-Path Remote Defect Indication (VT
Path RDI, also known as VT Path FERF). |
TRAP-TYPE |
|
|
|
grAtmPVCUp |
16 |
The trap issued when an ATM Permanent Virtual
circuit is enabled |
TRAP-TYPE |
|
|
|
grAtmPVCDown |
17 |
The trap issued when an ATM Permanent Virtual
circuit is disabled |
TRAP-TYPE |
|
|
|
grInterfaceDown |
18 |
The trap issued when an interface is
not responding to pings. |
TRAP-TYPE |
|
|
|
grIfInOctetsHigh |
19 |
The trap issued when ifInOctets is greater
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfInOctetsLow |
20 |
The trap issued when ifInOctets is less
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfOutOctetsHigh |
21 |
The trap issued when ifOutOctets is greater
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfOutOctetsLow |
22 |
The trap issued when ifOutOctets is less
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfInUcastPktsHigh |
23 |
The trap issued when ifInUcastPkts is greater
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfInUcastPktsLow |
24 |
The trap issued when ifInUcastPkts is less
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfOutUcastPktsHigh |
25 |
The trap issued when ifOutUcastPkts is greater
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfOutUcastPktsLow |
26 |
The trap issued when ifOutUcastPkts is less
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfInErrorsHigh |
27 |
The trap issued when ifInErrors is greater
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfInErrorsLow |
28 |
The trap issued when ifInErrors is less
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfOutErrorsHigh |
29 |
The trap issued when ifOutErrors is greater
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfOutErrorsLow |
30 |
The trap issued when ifOutErrors is less
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfInDiscardsHigh |
31 |
The trap issued when ifInDiscards is greater
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfInDiscardsLow |
32 |
The trap issued when ifInDiscards is less
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfOutDiscardsHigh |
33 |
The trap issued when ifOutDiscards is greater
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfOutDiscardsLow |
34 |
The trap issued when ifOutDiscards is less
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grGatedDown |
35 |
The trap issued when the threshold poller
detects that gated is not running. |
TRAP-TYPE |
|
|
|
grSnmpReset |
36 |
The trap issued when threshpoll detects that
the snmp agent has restarted. |
TRAP-TYPE |
|
|
|
grIfHCInOctetsHigh |
37 |
The trap issued when ifHCInOctets is greater
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfHCInOctetsLow |
38 |
The trap issued when ifHCInOctets is less
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfHCInUcastPktsHigh |
39 |
The trap issued when ifHCInUcastPkts is greater
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfHCInUcastPktsLow |
40 |
The trap issued when ifHCInUcastPkts is less
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfHCInMulticastPktsHigh |
41 |
The trap issued when ifHCInMulticastPkts is greater
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfHCInMulticastPktsLow |
42 |
The trap issued when ifHCInMulticastPkts is less
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfHCInBroadcastPktsHigh |
43 |
The trap issued when ifHCInBroadcastPkts is greater
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfHCInBroadcastPktsLow |
44 |
The trap issued when ifHCInBroadcastPkts is less
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfHCOutOctetsHigh |
45 |
The trap issued when ifHCOutOctets is greater
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfHCOutOctetsLow |
46 |
The trap issued when ifHCOutOctets is less
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfHCOutUcastPktsHigh |
47 |
The trap issued when ifHCOutUcastPkts is greater
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfHCOutUcastPktsLow |
48 |
The trap issued when ifHCOutUcastPkts is less
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfHCOutMulticastPktsHigh |
49 |
The trap issued when ifHCOutMulticastPkts is greater
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfHCOutMulticastPktsLow |
50 |
The trap issued when ifHCOutMulticastPkts is less
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfHCOutBroadcastPktsHigh |
51 |
The trap issued when ifHCOutBroadcastPkts is greater
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|
grIfHCOutBroadcastPktsLow |
52 |
The trap issued when ifHCOutBroadcastPkts is less
than the configured threshold for that interface. |
TRAP-TYPE |
|
|
|