NETGEAR-ME-MIB

File: NETGEAR-ME-MIB.mib (42376 bytes)

Imported modules

SNMPv2-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

Counter32 TimeTicks enterprises
IpAddress DisplayString PhysAddress
OBJECT-TYPE TRAP-TYPE

Defined Types

WirelessAPConnectedStationEntry  
SEQUENCE    
  wirelessAPConnectedStationMacAddr PhysAddress
  wirelessAPConnectedStationStatus INTEGER

WirelessAPControlListEntry  
SEQUENCE    
  wirelessAPControlListMacAddr PhysAddress

WirelessAPKeysSetEntry  
SEQUENCE    
  wirelessAPKeysSetEnabled INTEGER
  wirelessAPKeys DisplayString

Defined Values

netgear 1.3.6.1.4.1.4526
OBJECT IDENTIFIER    

wirelessProducts 1.3.6.1.4.1.4526.4
OBJECT IDENTIFIER    

wirelessAccessPointDev 1.3.6.1.4.1.4526.4.1
OBJECT IDENTIFIER    

wirelessAPSystemGroup 1.3.6.1.4.1.4526.4.1.1
OBJECT IDENTIFIER    

wirelessAPConnectedStationGroup 1.3.6.1.4.1.4526.4.1.2
OBJECT IDENTIFIER    

wirelessAPIfTrafficGroup 1.3.6.1.4.1.4526.4.1.3
OBJECT IDENTIFIER    

wirelessAPIfSettingsGroup 1.3.6.1.4.1.4526.4.1.4
OBJECT IDENTIFIER    

wirelessAPWirelessSettingsGroup 1.3.6.1.4.1.4526.4.1.5
OBJECT IDENTIFIER    

wirelessAPSecuritySettingsGroup 1.3.6.1.4.1.4526.4.1.6
OBJECT IDENTIFIER    

wirelessAPMacAddr 1.3.6.1.4.1.4526.4.1.1.1
Access Point MAC address, It will be like '00c002003009'
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

wirelessAPFWVer 1.3.6.1.4.1.4526.4.1.1.2
Access Point firmware version, It will be like 'Version 2.0 Release 08'
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wirelessAPDateTime 1.3.6.1.4.1.4526.4.1.1.3
The date and time, with optional timezone information. It will be like '2003-04-03 02:50:54 GMT'
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wirelessAPUpTime 1.3.6.1.4.1.4526.4.1.1.4
The time (in hundredths of a second) since the network management portion of the system was last re-initialized. It will like '11223533' in the unit of 1/100second. This object value is the same as MIB-II sysUpTime object
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wirelessAPResetNow 1.3.6.1.4.1.4526.4.1.1.5
Setting this object to true(1) causes the device to reset. Reading this object always returns false(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-reset(0), reset(1)  

wirelessAPResetToFactoryDefault 1.3.6.1.4.1.4526.4.1.1.6
Setting this object to true(1) causes the device to reset to factory default value. Reading this object always returns false(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-erase(0), erase(1)  

wirelessAPPassword 1.3.6.1.4.1.4526.4.1.1.7
Get/Set the password
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(4..20)  

wirelessAPClearLog 1.3.6.1.4.1.4526.4.1.1.8
Setting this value clear(1) causes the AP to clear the log data, Reading this walue always return not-clear(0).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-clear(0), clear(1)  

wirelessAPSaveConfiguration 1.3.6.1.4.1.4526.4.1.1.9
Setting this value save(1) causes the settings changed by SNMP to be stored forever but in memory, Reading this walue always return save(0).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-save(0), save(1)  

snmpTrapVersion 1.3.6.1.4.1.4526.4.1.1.10
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER v1(0), v2c(1)  

snmpTrapRcvIpType 1.3.6.1.4.1.4526.4.1.1.11
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER uni-cast(0), broadcast(1)  

snmpAPTrapRcvIpAddress 1.3.6.1.4.1.4526.4.1.1.12
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snmpAPSNMPEnable 1.3.6.1.4.1.4526.4.1.1.13
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

snmpAPCommunity 1.3.6.1.4.1.4526.4.1.1.14
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..7)  

snmpAPAccessRight 1.3.6.1.4.1.4526.4.1.1.15
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER read-only(0), read-and-write(1)  

snmpAPManagersType 1.3.6.1.4.1.4526.4.1.1.16
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER a-specific-station(0), any-station(1)  

snmpAPSpecificStationIp 1.3.6.1.4.1.4526.4.1.1.17
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snmpAPTrapEnable 1.3.6.1.4.1.4526.4.1.1.18
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

wirelessAPConnectedStationTableRefresh 1.3.6.1.4.1.4526.4.1.2.1
Setting this value to refresh(1), the wireless AP will start the conntected Station Table refresh progress. Reading this vlaue always return not-refresh(1)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-refresh(0), refresh(1)  

wirelessAPConnectedStation 1.3.6.1.4.1.4526.4.1.2.2
OBJECT IDENTIFIER    

wirelessAPConnectedStationTable 1.3.6.1.4.1.4526.4.1.2.2.1
Wireless AP Connected Station Table Object
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WirelessAPConnectedStationEntry

wirelessAPConnectedStationEntry 1.3.6.1.4.1.4526.4.1.2.2.1.1
An entry containing information for Wireless AP Connected Station Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WirelessAPConnectedStationEntry  

wirelessAPConnectedStationMacAddr 1.3.6.1.4.1.4526.4.1.2.2.1.1.2
Wireless Connected Station Mac Address
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

wirelessAPConnectedStationStatus 1.3.6.1.4.1.4526.4.1.2.2.1.1.3
Wireless Connected Station Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER associated(0), athenticating(1), authenticated(2), not-associated(3)  

wirelessAPControl 1.3.6.1.4.1.4526.4.1.2.3
Wireless Access Point Control
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

wirelessAPControlList 1.3.6.1.4.1.4526.4.1.2.4
OBJECT IDENTIFIER    

wirelessAPControlListTable 1.3.6.1.4.1.4526.4.1.2.4.1
Wireless Access Point Control List Table Object
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WirelessAPControlListEntry

wirelessAPControlListEntry 1.3.6.1.4.1.4526.4.1.2.4.1.1
An entry containing information for Wireless Access Point Control List Table Object
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WirelessAPControlListEntry  

wirelessAPControlListMacAddr 1.3.6.1.4.1.4526.4.1.2.4.1.1.2
Wireless Access Point Control List Mac Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress  

wirelessAPCtlOperate 1.3.6.1.4.1.4526.4.1.2.5
OBJECT IDENTIFIER    

wirelessAPAddCtlMacAddr 1.3.6.1.4.1.4526.4.1.2.5.1
The added entry's Physical Address, Reading this object always return '000000000000'
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress  

wirelessAPDelCtlMacAddr 1.3.6.1.4.1.4526.4.1.2.5.2
The deleted entry's Physical Address, Reading this object always return '000000000000'
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress  

wirelessAPIfWiredTrafficGroup 1.3.6.1.4.1.4526.4.1.3.1
OBJECT IDENTIFIER    

wirelessAPIfWlanTrafficGroup 1.3.6.1.4.1.4526.4.1.3.2
OBJECT IDENTIFIER    

wirelessAPIfWiredTotalOctetsIn 1.3.6.1.4.1.4526.4.1.3.1.1
Traffic received by the wireless AP via Ethernet in octets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWiredTotalOctetsOut 1.3.6.1.4.1.4526.4.1.3.1.2
Traffic transmitted by the wireless AP via Ethernet in octets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWiredPacketsIn 1.3.6.1.4.1.4526.4.1.3.1.3
Traffic received by the wireless AP via Ethernet in packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWiredPacketsOut 1.3.6.1.4.1.4526.4.1.3.1.4
Traffic transmitted by the wireless AP via Ethernet in packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWiredThroughputIn 1.3.6.1.4.1.4526.4.1.3.1.5
Throughput-in at Ethernet by the wireless AP in the unit of B/s
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWiredThroughputOut 1.3.6.1.4.1.4526.4.1.3.1.6
Throughput-out at Ethernet by the wireless AP in the unit of B/s
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWiredErrorsIn 1.3.6.1.4.1.4526.4.1.3.1.7
CRC errors in in-traffic occurs at Ethernet by the wireless AP
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWiredErrorsOut 1.3.6.1.4.1.4526.4.1.3.1.8
CRC errors in out-traffic occurs at Ethernet by the wireless AP
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWiredTrafficResetCounter 1.3.6.1.4.1.4526.4.1.3.1.9
Reset the Etherenet interface both Octets In and Out counters
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

wirelessAPIfWLANTotalOctetsIn 1.3.6.1.4.1.4526.4.1.3.2.1
Traffic received via WLAN by the wireless AP in octets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWLANTotalOctetsOut 1.3.6.1.4.1.4526.4.1.3.2.2
Traffic transmitted via WLAN by the wireless AP in octets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWLANUnicastPacketsIn 1.3.6.1.4.1.4526.4.1.3.2.3
Unicast traffic received via WLAN by the wireless AP in packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWLANUnicastPacketsOut 1.3.6.1.4.1.4526.4.1.3.2.4
Unicast traffic transmitted via WLAN by the wireless AP in packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWLANBroadcastPacketsIn 1.3.6.1.4.1.4526.4.1.3.2.5
Broadcast traffic received via WLAN by the wireless AP in packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWLANBroadcastPacketsOut 1.3.6.1.4.1.4526.4.1.3.2.6
Broadcast traffic transmitted via WLAN by the wireless AP in packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWLANMulticastPacketsIn 1.3.6.1.4.1.4526.4.1.3.2.7
Multicast traffic received via WLAN by the wireless AP in packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWLANMulticastPacketsOut 1.3.6.1.4.1.4526.4.1.3.2.8
Multicast traffic transmitted via WLAN by the wireless AP in packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWLANThroughputIn 1.3.6.1.4.1.4526.4.1.3.2.9
Throughtput-in at WLAN transmitted by the wireless AP in the unit of B/s
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWLANThroughputOut 1.3.6.1.4.1.4526.4.1.3.2.10
Throughtput-out at WLAN transmitted by the wireless AP in the unit of B/s
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWLANPacketsIn 1.3.6.1.4.1.4526.4.1.3.2.11
Total in-packets at WLAN received by the wireless AP in packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWLANPacketsOut 1.3.6.1.4.1.4526.4.1.3.2.12
Total out-packets at WLAN transmitted by the wireless AP in packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

wirelessAPIfWLANTrafficResetCounter 1.3.6.1.4.1.4526.4.1.3.2.13
Reset the WLAN interface 's counters, they will start from 0 again.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

wirelessAPDHCPClientObtainIPchoice 1.3.6.1.4.1.4526.4.1.4.1
Wireless Access Point DHCP Client Obtain an IP address choice static(0) means use static IP addess; automatic(1) means obtain an IP address automatically from DHCP server
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER static(0), automatic(1)  

wirelessAPDHCPClientIPaddr 1.3.6.1.4.1.4526.4.1.4.2
Wireless Access Point DHCP Client IP address If wirelessAPDHCPClientObtainIPchoice is set to static(0), then it should be the same as wirelessAPDHCPClientStaticIPaddr.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wirelessAPDHCPClientIPsubnetMask 1.3.6.1.4.1.4526.4.1.4.3
Wireless Access Point DHCP Client IP subnet mask If wirelessAPDHCPClientObtainIPchoice is set to static(0), then it should be the same as wirelessAPDHCPClientStaticIPsubnetMask.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wirelessAPDHCPClientGateway 1.3.6.1.4.1.4526.4.1.4.4
Wireless Access Point DHCP Client gateway If wirelessAPDHCPClientObtainIPchoice is set to static(0), then it should be the same as wirelessAPDHCPClientStaticGateway.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wirelessAPDHCPClientPriDNS 1.3.6.1.4.1.4526.4.1.4.5
Wireless Access Point DHCP Client primary DNS If wirelessAPDHCPClientObtainIPchoice is set to static(0), then it should be the same as wirelessAPDHCPClientStaticPriDNS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wirelessAPDHCPClientSecDNS 1.3.6.1.4.1.4526.4.1.4.6
Wireless Access Point DHCP Client secondary DNS If wirelessAPDHCPClientObtainIPchoice is set to static(0), then it should be the same as wirelessAPDHCPClientStaticSecDNS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wirelessAPDHCPClientStaticIPaddr 1.3.6.1.4.1.4526.4.1.4.7
Wireless Access Point DHCP Client static IP address If wirelessAPDHCPClientObtainIPchoice is set to automatic (1), then it should be 0.0.0.0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wirelessAPDHCPClientStaticIPsubnetMask 1.3.6.1.4.1.4526.4.1.4.8
Wireless Access Point DHCP Client static IP subnet mask If wirelessAPDHCPClientObtainIPchoice is set to automatic (1), then it should be 0.0.0.0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wirelessAPDHCPClientStaticGateway 1.3.6.1.4.1.4526.4.1.4.9
Wireless Access Point DHCP Client static gateway If wirelessAPDHCPClientObtainIPchoice is set to automatic (1), then it should be 0.0.0.0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wirelessAPDHCPClientStaticPriDNS 1.3.6.1.4.1.4526.4.1.4.10
Wireless Access Point DHCP Client static primary DNS If wirelessAPDHCPClientObtainIPchoice is set to automatic (1), then it should be 0.0.0.0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wirelessAPDHCPClientStaticSecDNS 1.3.6.1.4.1.4526.4.1.4.11
Wireless Access Point DHCP Client static secondary DNS If wirelessAPDHCPClientObtainIPchoice is set to automatic (1), then it should be 0.0.0.0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wirelessAPName 1.3.6.1.4.1.4526.4.1.4.12
Wireless Access Point Name
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

wirelessAPWINSchoice 1.3.6.1.4.1.4526.4.1.4.13
Wireless Access Point WINS choice If it is set to disAbled, then not using WINS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disAbled(0), enAbled(1)  

wirelessAPWINSServerName 1.3.6.1.4.1.4526.4.1.4.14
WINS Server Name If wirelessAPWINSchoice is enAbled, either set this object If wirelessAPWINSchoice is disAbled, this object value should be cleared
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

wirelessAPCountryDomain 1.3.6.1.4.1.4526.4.1.5.1
Wireless Access Point Country Domain
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), africa(1), asia(2), australia(3), canada(4), europe(5), france(6), israel(7), japan(8), mexico(9), southAmerica(10), usa(11)  

wirelessAPChannelNo 1.3.6.1.4.1.4526.4.1.5.2
Wireless Access Point Channel No Auto(0) default
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..11  

wirelessAPSSID 1.3.6.1.4.1.4526.4.1.5.3
Wireless Access Point SSID This object value should be the same as IEEE 802.11 MIB dot11DesiredSSID
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

wirelessAPPassphrase 1.3.6.1.4.1.4526.4.1.5.7
Wireless AP Passphrase This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

wirelessAPGenerateKeysEnabled 1.3.6.1.4.1.4526.4.1.5.8
Wireless Access Point Generate Keys This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disAbled(0), enAbled(1)  

wirelessAPKeysSet 1.3.6.1.4.1.4526.4.1.5.9
OBJECT IDENTIFIER    

wirelessAPKeysSetTable 1.3.6.1.4.1.4526.4.1.5.9.1
Wireless Access Point Keys Set Table Object This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WirelessAPKeysSetEntry

wirelessAPKeysSetEntry 1.3.6.1.4.1.4526.4.1.5.9.1.1
An entry containing information for Wireless Access Point Keys Set Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WirelessAPKeysSetEntry  

wirelessAPKeysSetEnabled 1.3.6.1.4.1.4526.4.1.5.9.1.1.2
Enabled or Disabled a Wireless Access Point Key This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled We only allow one key set will be enabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disAbled(0), enAbled(1)  

wirelessAPKeys 1.3.6.1.4.1.4526.4.1.5.9.1.1.3
Wireless AP Key This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..13)  

wirelessAPBasicRateChoice 1.3.6.1.4.1.4526.4.1.5.10
Wireless AP Basic Rate selection: auto(0) means Auto-negotiate and fixed(1) means Fixed rate
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), fixed(1)  

wirelessAPFixedRate 1.3.6.1.4.1.4526.4.1.5.11
OBJECT IDENTIFIER    

wirelessAPFixedRate1 1.3.6.1.4.1.4526.4.1.5.11.1
If wirelessAPBasicRateChoice is set to auto(0), then the value in this object should be empty. oneM means 1Mbps, twoM means 2Mbps, fiveDotfiveM means 5.5Mbps, elevenM means 11Mbps This object won't be allowed to write unless wirelessAPBasicRateChoice is set to fixed(1)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER oneM-disabled(0), oneM-enabled(1)  

wirelessAPFixedRate2 1.3.6.1.4.1.4526.4.1.5.11.2
If wirelessAPBasicRateChoice is set to auto(0), then the value in this object should be empty. oneM means 1Mbps, twoM means 2Mbps, fiveDotfiveM means 5.5Mbps, elevenM means 11Mbps This object won't be allowed to write unless wirelessAPBasicRateChoice is set to fixed(1)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER twoM-disabled(0), twoM-enabled(1)  

wirelessAPFixedRate5-5 1.3.6.1.4.1.4526.4.1.5.11.3
If wirelessAPBasicRateChoice is set to auto(0), then the value in this object should be empty. oneM means 1Mbps, twoM means 2Mbps, fiveDotfiveM means 5.5Mbps, elevenM means 11Mbps This object won't be allowed to write unless wirelessAPBasicRateChoice is set to fixed(1)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fiveDotFiveM-disabled(0), fiveDotFiveM-enabled(1)  

wirelessAPFixedRate11 1.3.6.1.4.1.4526.4.1.5.11.4
If wirelessAPBasicRateChoice is set to auto(0), then the value in this object should be empty. oneM means 1Mbps, twoM means 2Mbps, fiveDotfiveM means 5.5Mbps, elevenM means 11Mbps This object won't be allowed to write unless wirelessAPBasicRateChoice is set to fixed(1)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER elevenM-disabled(0), elevenM-enabled(1)  

wirelessAPRTSThreshold 1.3.6.1.4.1.4526.4.1.5.12
The value in this object should be the same as IEEE 802.11 dot11RTSThreshold
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2347  

wirelessAPFragmentationThreshold 1.3.6.1.4.1.4526.4.1.5.13
The value in this object should be the same as IEEE 802.11 dot11FragmentationThreshold
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 256..2346  

wirelessAPBeaconPeriod 1.3.6.1.4.1.4526.4.1.5.14
The value in this object should be the same as IEEE 802.11 dot11BeaconPeriod
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wirelessAPShortPreambleOptionImplemented 1.3.6.1.4.1.4526.4.1.5.15
The value of this object is 0 denoting that the short preamble used, 1 denoting that the long preamble used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER short(0), long(1)  

wirelessAPAntennaSelection 1.3.6.1.4.1.4526.4.1.5.16
Antenna Selection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER primary(1), secondary(2), diversity(3)  

wirelessAPMaximumTransmitPowerLevel 1.3.6.1.4.1.4526.4.1.5.17
The value in this object should be the same as IEEE 802.11 dot11MaximumTransmitPowerLevel. However, our default value will be 18dbm. copy from IEEE 802.11 MIB: This attribute shall indicate the maximum transmit power, in dBm, allowed in the subband for the associated domain country string. The default value of this attribute shall be zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER eighteendbm(1), seventeendbm(2), fifteendbm(3), thirteendbm(4), sevendbm(5), zerodbm(6)  

wirelessAPOperatingMode 1.3.6.1.4.1.4526.4.1.5.18
Operating Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER eight0twoDot1xAP(0), noneight0twoDot1xAP(1)  

wirelessAPSSIDEnabled 1.3.6.1.4.1.4526.4.1.5.19
Enabled or disabled Wireless Access Point Broadcast Wireless Network Name SSID
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disAbled(0), enAbled(1)  

wirelessAP802dot1xSecurityEnabled 1.3.6.1.4.1.4526.4.1.6.1
802.1x Security enabled or disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enAbled(0), disAbled(1)  

wirelessAPEAPauthType 1.3.6.1.4.1.4526.4.1.6.2
Operating Mode This object won't be allowed to write unless wirelessAP802dot1xSecurityEnabled is enAbled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notalloweap-md5(0), alloweap-md5(1)  

wirelessAPKeyExchange 1.3.6.1.4.1.4526.4.1.6.16
AP Key Exchange enabled or disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disAbled(0), enAbled(1)  

wirelessAPKeyExchangeKeylife 1.3.6.1.4.1.4526.4.1.6.17
AP exchanged key lifetime
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wirelessAPRadiusServer 1.3.6.1.4.1.4526.4.1.6.3
Radius Server Name/IP Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wirelessAPRadiusPort 1.3.6.1.4.1.4526.4.1.6.4
Radius Port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wirelessAPSharedKey 1.3.6.1.4.1.4526.4.1.6.5
Radius Server Shared Key
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

wirelessAPRadiusServer2 1.3.6.1.4.1.4526.4.1.6.7
Radius Server Name/IP Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wirelessAPRadAccountPort 1.3.6.1.4.1.4526.4.1.6.11
Radius Accounting Port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wirelessAPRadAccountEnable 1.3.6.1.4.1.4526.4.1.6.18
AP Radius Accounting enabled or disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disAbled(0), enAbled(1)  

wirelessAPMacAuthEnable 1.3.6.1.4.1.4526.4.1.6.19
AP Mac Authentication enabled or disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disAbled(0), enAbled(1)  

wirelessAPRadAccountUpdateEnable 1.3.6.1.4.1.4526.4.1.6.21
AP Radius Account Update enabled or disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disAbled(0), enAbled(1)  

wirelessAPRadAccountUpdatePeriod 1.3.6.1.4.1.4526.4.1.6.22
AP Radius Account Update Period
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wirelessAPRadAccountIdlePeriod 1.3.6.1.4.1.4526.4.1.6.23
Idle timer for AP not receiving any traffic from a wireless station to perform a dissociation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..99  

wirelessTIOperateMode 1.3.6.1.4.1.4526.4.1.6.25
AP Operation Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER wirelessaccesspoint(0), point-to-pointbridge(4), point-to-multi-pointbridge(5), clientaccesspoint(3), repeateraccesspoint(2)  

wirelessTIDstMac 1.3.6.1.4.1.4526.4.1.6.26
The Destination Address When one operation mode is selected which the remote address necessary.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress  

wirelessTIIsolation 1.3.6.1.4.1.4526.4.1.6.28
AP Wireless Separation Setting
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

wirelessTIEnable80211d 1.3.6.1.4.1.4526.4.1.6.29
AP Worldwide Mode Setting
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

wirelessAPSecurityMode 1.3.6.1.4.1.4526.4.1.6.37
AP Security Mode Setting, can take the place of AP Authentication and Encryption Setting Logic Relation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER open-disable-mode(0), open-64wep-mode(1), open-128wep-mode(2), shared-64wep-mode(3), shared-128wep-mode(4)