NETEXEC-MIB

File: NETEXEC-MIB.mib (150070 bytes)

Imported modules

RFC1213-MIB	RFC1155-SMI	RFC-1212
RFC-1215

Imported symbols

DisplayString	Counter	TimeTicks
OBJECT-TYPE	TRAP-TYPE

Defined Types

DsucsuSysEntry
SEQUENCE
	dsucsuSysSlot	INTEGER	1..16
	dsucsuSysNode	INTEGER	1..255
	dsucsuSysName	DisplayString	Size(0..8)
	dsucsuSysType	INTEGER
	dsucsuSysSoftRev	DisplayString	Size(0..10)
	dsucsuSysHardRev	DisplayString	Size(0..1)
	dsucsuSysNumChan	INTEGER	0..4

DsucsuCfgNetEntry
SEQUENCE
	dsucsuCfgNetSlot	INTEGER	1..16
	dsucsuCfgNetNode	INTEGER	1..255
	dsucsuCfgNetIndex	INTEGER	1..2
	dsucsuCfgNetInterface	INTEGER
	dsucsuCfgNetType	INTEGER
	dsucsuCfgNetCoding	INTEGER
	dsucsuCfgNetClockSource	INTEGER
	dsucsuCfgNetCsuEnable	INTEGER
	dsucsuCfgNetCsuLBO	INTEGER
	dsucsuCfgNetCsuDensity	INTEGER
	dsucsuCfgNetRateMultiples	INTEGER
	dsucsuCfgNetOutputPulse	INTEGER
	dsucsuCfgNetTs0	INTEGER
	dsucsuCfgNetTs16	INTEGER

DsucsuCfgDteChanEntry
SEQUENCE
	dsucsuCfgDteChanSlot	INTEGER	1..16
	dsucsuCfgDteChanNode	INTEGER	1..255
	dsucsuCfgDteChanIndex	INTEGER	1..4
	dsucsuCfgDteChanType	INTEGER
	dsucsuCfgDteChanRate	INTEGER
	dsucsuCfgDteChanEncoding	INTEGER
	dsucsuCfgDteChanStartDs0	INTEGER
	dsucsuCfgDteChanCtrlSignal	INTEGER
	dsucsuCfgDteChanTiming	INTEGER
	dsucsuCfgDteChanClockInvert	INTEGER
	dsucsuCfgDteChanDataInvert	INTEGER

DsucsuCfgFrmChanEntry
SEQUENCE
	dsucsuCfgFrmChanSlot	INTEGER	1..16
	dsucsuCfgFrmChanNode	INTEGER	1..255
	dsucsuCfgFrmChanIndex	INTEGER	1..4
	dsucsuCfgFrmChanType	INTEGER
	dsucsuCfgFrmChanNumDs0	INTEGER
	dsucsuCfgFrmChanEncoding	INTEGER
	dsucsuCfgFrmChanStartDs0	INTEGER
	dsucsuCfgFrmChanDteStartDs0	INTEGER
	dsucsuCfgFrmChanMapping	INTEGER
	dsucsuCfgFrmChanDs0Type	INTEGER
	dsucsuCfgFrmChanFrameType	INTEGER
	dsucsuCfgFrmChanOutputPulse	INTEGER
	dsucsuCfgFrmChanNetMapping	INTEGER

DsucsuConfigSupEntry
SEQUENCE
	dsucsuConfigSupSlot	INTEGER	1..16
	dsucsuConfigSupNode	INTEGER	1..255
	dsucsuConfigSupIndex	INTEGER	1..2
	dsucsuConfigSupDs0	INTEGER

DsucsuCfgSupAuxEntry
SEQUENCE
	dsucsuCfgSupAuxSlot	INTEGER	1..16
	dsucsuCfgSupAuxNode	INTEGER	1..255
	dsucsuCfgSupAuxIndex	INTEGER	1..2
	dsucsuCfgSupAuxFdl	INTEGER

DsucsuActvConfEntry
SEQUENCE
	dsucsuActvConfSlot	INTEGER	1..16
	dsucsuActvConfNode	INTEGER	1..255
	dsucsuActvConfIndex	INTEGER	1..4

DsucsuEventDesEntry
SEQUENCE
	dsucsuEventDesSlot	INTEGER	1..16
	dsucsuEventDesNode	INTEGER	1..255
	dsucsuEventNameIndx	DisplayString	Size(0..8)
	dsucsuEventDesName1	DisplayString	Size(0..8)
	dsucsuEventDesName2	DisplayString	Size(0..8)
	dsucsuEventClrDest	INTEGER

DsucsuCfgMaintEntry
SEQUENCE
	dsucsuCfgMaintSlot	INTEGER	1..16
	dsucsuCfgMaintNode	INTEGER	1..255
	dsucsuCfgMaintChanType	INTEGER
	dsucsuCfgMaintFlowCtrl	INTEGER
	dsucsuCfgMaintStopBits	INTEGER
	dsucsuCfgMaintParity	INTEGER
	dsucsuCfgMaintDataBits	INTEGER
	dsucsuCfgMaintBaud	INTEGER

DsucsuCfgCommEntry
SEQUENCE
	dsucsuCfgCommSlot	INTEGER	1..16
	dsucsuCfgCommNode	INTEGER	1..255
	dsucsuCfgCommChanType	INTEGER
	dsucsuCfgCommFlowCtrl	INTEGER
	dsucsuCfgCommStopBits	INTEGER
	dsucsuCfgCommParity	INTEGER
	dsucsuCfgCommDataBits	INTEGER
	dsucsuCfgCommBaud	INTEGER

DsucsuCfgBrdEntry
SEQUENCE
	dsucsuCfgBrdSlot	INTEGER	1..16
	dsucsuCfgBrdNode	INTEGER	1..255
	dsucsuCfgBrdTiming	INTEGER

DsucsuCfgAutoAssignEntry
SEQUENCE
	dsucsuConnAutoSlot	INTEGER	1..16
	dsucsuConnAutoNode	INTEGER	1..255
	dsucsuConnAutoSrcPort	INTEGER	1..4
	dsucsuConnAutoStartDS0	INTEGER
	dsucsuConnAutoDestPort	INTEGER
	dsucsuConnAutoType	INTEGER
	dsucsuConnDteRate	INTEGER	0..1536000
	dsucsuConnDteDensity	INTEGER
	dsucsuConnDs0Required	INTEGER	0..24
	dsucsuConnAutoStatus	INTEGER
	dsucsuConnAutoUpdateCmd	INTEGER

DsucsuCfgCurrentConnections
SEQUENCE
	dsucsuSlot	INTEGER	1..16
	dsucsuNode	INTEGER	1..255
	dsucsuT1Index	INTEGER	1..4
	dsucsuDs0	INTEGER	1..24
	dsucsuDtePort	INTEGER
	dsucsuType	INTEGER

DsucsuCfgEditConnEntry
SEQUENCE
	dsucsuConnSlot	INTEGER	1..16
	dsucsuConnNode	INTEGER	1..255
	dsucsuConnSrcPort	INTEGER	1..4
	dsucsuConnSrcDs0	INTEGER	1..24
	dsucsuConnDestPort	INTEGER
	dsucsuConnDestDs0	INTEGER
	dsucsuConnType	INTEGER
	dsucsuConnNumDs0s	INTEGER	1..24
	dsucsuConnSetStatus	INTEGER
	dsucsuConnConnect	INTEGER
	dsucsuConnUpdateRequired	INTEGER
	dsucsuConnUpdateCmd	INTEGER
	dsucsuConnClearEditBuff	INTEGER

DsucsuDiagNetEntry
SEQUENCE
	dsucsuDiagNetSlot	INTEGER	1..16
	dsucsuDiagNetNode	INTEGER	1..255
	dsucsuDiagNetIndex	INTEGER	1..2
	dsucsuDiagNetLclNetAggLpbk	INTEGER
	dsucsuDiagNetLclNetLpbk	INTEGER
	dsucsuDiagNetLclNetPayload	INTEGER
	dsucsuDiagNetLclNetBiDir	INTEGER
	dsucsuDiagNetRemCsuLpbk	INTEGER
	dsucsuDiagNetRemDsuLpbk	INTEGER
	dsucsuDiagNetEvElapTime	TimeTicks
	dsucsuDiagNetEvCRC6Err	Counter
	dsucsuDiagNetEvOofErr	Counter
	dsucsuDiagNetErrEvents	Counter
	dsucsuDiagNetClearEvReg	INTEGER

DsucsuDiagDteEntry
SEQUENCE
	dsucsuDiagDteSlot	INTEGER	1..16
	dsucsuDiagDteNode	INTEGER	1..255
	dsucsuDiagDteIndex	INTEGER	1..4
	dsucsuDiagDteLocalBiDir	INTEGER
	dsucsuDiagDteLocalPayload	INTEGER
	dsucsuDiagDteRemLpbk	INTEGER
	dsucsuDiagDteBertTestAct	INTEGER
	dsucsuDiagDteBertHourStrt	INTEGER	0..23
	dsucsuDiagDteBertMinStrt	INTEGER	0..59
	dsucsuDiagDteBertTimeElaps	TimeTicks
	dsucsuDiagDteBertErrors	Counter

DsucsuDiagFrmEntry
SEQUENCE
	dsucsuDiagFrmSlot	INTEGER	1..16
	dsucsuDiagFrmNode	INTEGER	1..255
	dsucsuDiagFrmIndex	INTEGER	1..4
	dsucsuDiagFrmLclLpbk	INTEGER
	dsucsuDiagFrmLclPayload	INTEGER
	dsucsuDiagFrmLclBiDir	INTEGER
	dsucsuDiagFrmRemLpbk	INTEGER
	dsucsuDiagFrmLclDte	INTEGER
	dsucsuDiagFrmLclDte2	INTEGER
	dsucsuDiagFrmBertTestAct	INTEGER
	dsucsuDiagFrmEvElapTime	TimeTicks
	dsucsuDiagFrmEvBpvErr	Counter
	dsucsuDiagFrmEvOofErr	Counter
	dsucsuDiagFrmFrameErr	Counter
	dsucsuDiagFrmClearEvReg	INTEGER

DsucsuDiagAuxEntry
SEQUENCE
	dsucsuDiagAuxSlot	INTEGER	1..16
	dsucsuDiagAuxNode	INTEGER	1..255
	dsucsuDiagAuxChAStatus	INTEGER
	dsucsuDiagAuxChBStatus	INTEGER
	dsucsuDiagAuxFdlStatus	INTEGER
	dsucsuDiagAuxFdl2Status	INTEGER
	dsucsuDiagAuxMaintStatus	INTEGER
	dsucsuDiagAuxCommStatus	INTEGER

DsucsuDiagPortEntry
SEQUENCE
	dsucsuDiagPortSlot	INTEGER	1..16
	dsucsuDiagPortNode	INTEGER	1..255
	dsucsuDiagPortIndex	INTEGER	1..4
	dsucsuDiagPortType	INTEGER
	dsucsuDiagPortStatus	INTEGER

DsucsuIntervalEntry
SEQUENCE
	dsucsuIntervalSlot	INTEGER	1..16
	dsucsuIntervalNode	INTEGER	1..255
	dsucsuIntervalPort	INTEGER	1..2
	dsucsuIntervalNum	INTEGER	1..96
	dsucsuIntervalESs	Counter
	dsucsuIntervalSESs	Counter
	dsucsuIntervalBPVs	Counter
	dsucsuIntervalFSs	Counter

DsucsuCurrentEntry
SEQUENCE
	dsucsuCurrentSlot	INTEGER	1..16
	dsucsuCurrentNode	INTEGER	1..255
	dsucsuCurrentPort	INTEGER	1..2
	dsucsuCurrentESs	Counter
	dsucsuCurrentSESs	Counter
	dsucsuCurrentBPVs	Counter
	dsucsuCurrentSECs	Counter
	dsucsuCurrentStatus	INTEGER

DsucsuTotalEntry
SEQUENCE
	dsucsuTotalSlot	INTEGER	1..16
	dsucsuTotalNode	INTEGER	1..255
	dsucsuTotalPort	INTEGER	1..2
	dsucsuTotalESs	Counter
	dsucsuTotalSESs	Counter
	dsucsuTotalBPVs	Counter
	dsucsuTotalSECs	Counter
	dsucsuTotalStatus	INTEGER

TyviewDatabaseEntry
SEQUENCE
	tyviewDatabaseSlot	INTEGER	1..16
	tyviewDatabaseNode	INTEGER	1..255
	tyviewDatabaseName	DisplayString	Size(0..8)
	tyviewDatabaseStatus	INTEGER

TyviewTPEntry
SEQUENCE
	tyviewTPRecord	INTEGER	1..25
	tyviewTPMonNodeMode	INTEGER
	tyviewTPNode	DisplayString	Size(0..8)
	tyviewTPAlarmType	INTEGER
	tyviewTPTriggerEvent	INTEGER
	tyviewTPInstance	INTEGER
	tyviewTPInterval	INTEGER
	tyviewTPEventAction	DisplayString	Size(0..32)
	tyviewTPDryContact	INTEGER
	tyviewTPClearDryContact	INTEGER

Defined Values

internet		1.3.6.1
OBJECT IDENTIFIER

private		1.3.6.1.4
OBJECT IDENTIFIER

enterprises		1.3.6.1.4.1
OBJECT IDENTIFIER

tylink		1.3.6.1.4.1.466
OBJECT IDENTIFIER

netexec		1.3.6.1.4.1.466.6
OBJECT IDENTIFIER

dsucsu		1.3.6.1.4.1.466.6.1
OBJECT IDENTIFIER

tyview		1.3.6.1.4.1.466.6.2
OBJECT IDENTIFIER

dsucsuSysTable		1.3.6.1.4.1.466.6.1.1
A list of system level attributes describing the addressed node.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuSysEntry

dsucsuSysEntry		1.3.6.1.4.1.466.6.1.1.1
System Object for a DSU/CSU
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuSysEntry

dsucsuSysSlot		1.3.6.1.4.1.466.6.1.1.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuSysNode		1.3.6.1.4.1.466.6.1.1.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuSysName		1.3.6.1.4.1.466.6.1.1.1.3
The unique name of the node accessed
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..8)

dsucsuSysType		1.3.6.1.4.1.466.6.1.1.1.4
A desciption of the system model: ie. ONS400, FNS400, ONS1000X, BLACK BOX FT1-4
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), ons400(2), fns400(3), ons400e(4), sns400(5), ons1000(6), ons232sp(7), ons271sp(8), ons200(9), ons400n(10), sns256(11), sns4000(12), sns1000(13), ty3410(14), ty3210(15), ons1010n(16), ty3250(17), ty3000n(18), ty3450n(19)

dsucsuSysSoftRev		1.3.6.1.4.1.466.6.1.1.1.5
Displays the Software Revision of the accessed node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

dsucsuSysHardRev		1.3.6.1.4.1.466.6.1.1.1.6
Displays the Hardware Revision of the accessed node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..1)

dsucsuSysNumChan		1.3.6.1.4.1.466.6.1.1.1.7
The number of channels that are installed on the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..4

dsucsuCfgNetTable		1.3.6.1.4.1.466.6.1.2
Network Line Configuration
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuCfgNetEntry

dsucsuCfgNetEntry		1.3.6.1.4.1.466.6.1.2.1
Configuration Object for a DSU/CSU
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuCfgNetEntry

dsucsuCfgNetSlot		1.3.6.1.4.1.466.6.1.2.1.1
The NEST slot to which the TyLink card is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuCfgNetNode		1.3.6.1.4.1.466.6.1.2.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuCfgNetIndex		1.3.6.1.4.1.466.6.1.2.1.3
The network index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2

dsucsuCfgNetInterface		1.3.6.1.4.1.466.6.1.2.1.4
The interface type for 3000N. For a T1 line, NETWORK or DSX-1 is valid.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	network(1), dsx-1(2)

dsucsuCfgNetType		1.3.6.1.4.1.466.6.1.2.1.5
The aggregate line type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	d4(1), esf-54016(2), esf-ansi(3), nsms(4), cept-2048(5)

dsucsuCfgNetCoding		1.3.6.1.4.1.466.6.1.2.1.6
The encoding scheme for the line. For a T1 line, AMI and B8ZS are valid. For an E1 line, AMI and HDB3 are valid.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ami(1), b8zs(2), hdb3(3)

dsucsuCfgNetClockSource		1.3.6.1.4.1.466.6.1.2.1.7
The aggregate timing for the addressed node.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	internal(1), loop(2), external-ch1(3), external-ch3(4), station-clock(5)

dsucsuCfgNetCsuEnable		1.3.6.1.4.1.466.6.1.2.1.8
Enable/Disable Internal CSU.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	dsx1(1), csu(2)

dsucsuCfgNetCsuLBO		1.3.6.1.4.1.466.6.1.2.1.9
The setting of the Line Buildout switch. Setting must be db_0 if network interface is DSX-1.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	db-0(1), db-7-5(2), db-15(3)

dsucsuCfgNetCsuDensity		1.3.6.1.4.1.466.6.1.2.1.10
The setting of the one stuffing option. Inserts a 1 into the 8th, 16th, or 64th bit position (depending on the selection) if the previous 7 bits were 0's.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), d-1-in-8(2), d-1-in-16(3), d-1-in-64(4), d-12pt5-percent(5)

dsucsuCfgNetRateMultiples		1.3.6.1.4.1.466.6.1.2.1.11
The channel rate multiples for each of the ports.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	nx56(1), nx64(2), extended-mixed(3), all-rates(4)

dsucsuCfgNetOutputPulse		1.3.6.1.4.1.466.6.1.2.1.12
The distance to the CSU in feet.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	pulse-0-133-ft(1), pulse-133-266-ft(2), pulse-266-399-ft(3), pulse-399-533-ft(4), pulse-533-655-ft(5)

dsucsuCfgNetTs0		1.3.6.1.4.1.466.6.1.2.1.13
The E1 Timeslot 0 value.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	crc4-enable(1), crc4-disable(2)

dsucsuCfgNetTs16		1.3.6.1.4.1.466.6.1.2.1.14
The E1 Timeslot 16 value. Valid values are data and multiframe alignment.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	data(1), multifr-align(2)

dsucsuCfgDteChanTable		1.3.6.1.4.1.466.6.1.4
DTE Channel Configuration
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuCfgDteChanEntry

dsucsuCfgDteChanEntry		1.3.6.1.4.1.466.6.1.4.1
DTE Channel Configuration Object for a DSU/CSU
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuCfgDteChanEntry

dsucsuCfgDteChanSlot		1.3.6.1.4.1.466.6.1.4.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuCfgDteChanNode		1.3.6.1.4.1.466.6.1.4.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuCfgDteChanIndex		1.3.6.1.4.1.466.6.1.4.1.3
The channel index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

dsucsuCfgDteChanType		1.3.6.1.4.1.466.6.1.4.1.4
The Dte channel type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	rs232(1), v35(2), rs449(3), none(4)

dsucsuCfgDteChanRate		1.3.6.1.4.1.466.6.1.4.1.5
The Data rate in kilobits per second. The rate is dependent on the setting of the Aggregate DTE channel multiples.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dsucsuCfgDteChanEncoding		1.3.6.1.4.1.466.6.1.4.1.6
The Channel encoding.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	b7s(1), alt(2), clr(3)

dsucsuCfgDteChanStartDs0		1.3.6.1.4.1.466.6.1.4.1.7
The starting DS0 for the addressed channel's data.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dsucsuCfgDteChanCtrlSignal		1.3.6.1.4.1.466.6.1.4.1.8
The control signal state.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	rts-on(1), rts-switch(2), cts-on(3), cts-auto(4)

dsucsuCfgDteChanTiming		1.3.6.1.4.1.466.6.1.4.1.9
The DTE channel Timing.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	loop1(1), loop2(2)

dsucsuCfgDteChanClockInvert		1.3.6.1.4.1.466.6.1.4.1.10
The DTE channel Clock Invert setting.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dsucsuCfgDteChanDataInvert		1.3.6.1.4.1.466.6.1.4.1.11
The DTE channel Data Invert setting.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dsucsuCfgFrmChanTable		1.3.6.1.4.1.466.6.1.5
Framed Channel Configuration
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuCfgFrmChanEntry

dsucsuCfgFrmChanEntry		1.3.6.1.4.1.466.6.1.5.1
Framed Channel Configuration Object for a DSU/CSU
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuCfgFrmChanEntry

dsucsuCfgFrmChanSlot		1.3.6.1.4.1.466.6.1.5.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuCfgFrmChanNode		1.3.6.1.4.1.466.6.1.5.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuCfgFrmChanIndex		1.3.6.1.4.1.466.6.1.5.1.3
The channel index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

dsucsuCfgFrmChanType		1.3.6.1.4.1.466.6.1.5.1.4
The framed channel type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	pbx(1), none(2)

dsucsuCfgFrmChanNumDs0		1.3.6.1.4.1.466.6.1.5.1.5
The number of DS0's on the network side.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dsucsuCfgFrmChanEncoding		1.3.6.1.4.1.466.6.1.5.1.6
The channel line code.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ami(1), b8zs(2)

dsucsuCfgFrmChanStartDs0		1.3.6.1.4.1.466.6.1.5.1.7
The starting DS0 on the network side.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dsucsuCfgFrmChanDteStartDs0		1.3.6.1.4.1.466.6.1.5.1.8
The starting DS0 on the framed channel.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dsucsuCfgFrmChanMapping		1.3.6.1.4.1.466.6.1.5.1.9
The Framed channel Mapping.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ctg-ds0(1), alt-ds0(2)

dsucsuCfgFrmChanDs0Type		1.3.6.1.4.1.466.6.1.5.1.10
The Framed channel DS0 Type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	data(1), voice(2), mixed(3)

dsucsuCfgFrmChanFrameType		1.3.6.1.4.1.466.6.1.5.1.11
The Framed channel Frame Type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	d4(1), esf(2)

dsucsuCfgFrmChanOutputPulse		1.3.6.1.4.1.466.6.1.5.1.12
The cabling distance from the PBX to the PBX channel port in feet.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	pulse-0-133-ft(1), pulse-133-266-ft(2), pulse-266-399-ft(3), pulse-399-533-ft(4), pulse-533-655-ft(5)

dsucsuCfgFrmChanNetMapping		1.3.6.1.4.1.466.6.1.5.1.13
The Network Ds0 Mapping.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ctg-ds0(1), alt-ds0(2)

dsucsuConfigSupTable		1.3.6.1.4.1.466.6.1.7
Inband Supervisory Channel Configuration
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuConfigSupEntry

dsucsuConfigSupEntry		1.3.6.1.4.1.466.6.1.7.1
Inband Supervisory Configuration Object for a DSU/CSU
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuConfigSupEntry

dsucsuConfigSupSlot		1.3.6.1.4.1.466.6.1.7.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuConfigSupNode		1.3.6.1.4.1.466.6.1.7.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuConfigSupIndex		1.3.6.1.4.1.466.6.1.7.1.3
The Supervisory channel index. Index 1 refers to supervisory channel A. Index 2 refers to supervisory channel B.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2

dsucsuConfigSupDs0		1.3.6.1.4.1.466.6.1.7.1.4
The DS0 to place the Supervisory channel in.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dsucsuCfgSupAuxTable		1.3.6.1.4.1.466.6.1.8
Auxillary Supervisory Channel Configuration
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuCfgSupAuxEntry

dsucsuCfgSupAuxEntry		1.3.6.1.4.1.466.6.1.8.1
Auxilary Supervisory Configuration Object for a DSU/CSU
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuCfgSupAuxEntry

dsucsuCfgSupAuxSlot		1.3.6.1.4.1.466.6.1.8.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuCfgSupAuxNode		1.3.6.1.4.1.466.6.1.8.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuCfgSupAuxIndex		1.3.6.1.4.1.466.6.1.8.1.3
Auxillary Supervisory Channel Configuration Index Index 1 refers to FDL supervisory on PORT 1. Index 2 refers to FDL supervisory on PORT 2.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2

dsucsuCfgSupAuxFdl		1.3.6.1.4.1.466.6.1.8.1.4
Places the supervisory link bits within the Facility Data Link bits of the Extended Superframe.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dsucsuActvConfTable		1.3.6.1.4.1.466.6.1.9
Activate a stored configuration on the selected node.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuActvConfEntry

dsucsuActvConfEntry		1.3.6.1.4.1.466.6.1.9.1
An activate configuration entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuActvConfEntry

dsucsuActvConfSlot		1.3.6.1.4.1.466.6.1.9.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuActvConfNode		1.3.6.1.4.1.466.6.1.9.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuActvConfIndex		1.3.6.1.4.1.466.6.1.9.1.3
Activate one of the four stored configurations.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	1..4

dsucsuEventDesTable		1.3.6.1.4.1.466.6.1.10
Table of event destinations. Events or alarms detected by a node can be reported to up to two destinations. The operator can set or clear either or both of these destinations via this Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuEventDesEntry

dsucsuEventDesEntry		1.3.6.1.4.1.466.6.1.10.1
Entry in the table of event destinations.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuEventDesEntry

dsucsuEventDesSlot		1.3.6.1.4.1.466.6.1.10.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuEventDesNode		1.3.6.1.4.1.466.6.1.10.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuEventNameIndx		1.3.6.1.4.1.466.6.1.10.1.3
The unique name of the node accessed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..8)

dsucsuEventDesName1		1.3.6.1.4.1.466.6.1.10.1.4
The name of the node/PC where the alarms will be sent to.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..8)

dsucsuEventDesName2		1.3.6.1.4.1.466.6.1.10.1.5
The name of the alternate node/PC where the alarms will be sent to.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..8)

dsucsuEventClrDest		1.3.6.1.4.1.466.6.1.10.1.6
Clears the destination(s) for the reporting of alarms.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	clearDest1(1), clearDest2(2), clearBothDest(3)

dsucsuCfgMaintTable		1.3.6.1.4.1.466.6.1.11
Maint. Port Configuration
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuCfgMaintEntry

dsucsuCfgMaintEntry		1.3.6.1.4.1.466.6.1.11.1
Maint. Port Configuration Object
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuCfgMaintEntry

dsucsuCfgMaintSlot		1.3.6.1.4.1.466.6.1.11.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuCfgMaintNode		1.3.6.1.4.1.466.6.1.11.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuCfgMaintChanType		1.3.6.1.4.1.466.6.1.11.1.3
The type of data passed over the Maint. port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), nsms(2), ascii(3), alarm(4), ext-event(5)

dsucsuCfgMaintFlowCtrl		1.3.6.1.4.1.466.6.1.11.1.4
Flow Control for the Maint. port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dsucsuCfgMaintStopBits		1.3.6.1.4.1.466.6.1.11.1.5
Number of Stopbits for the Maint. port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	stopbits-1(1), stopbits-1-5(2), stopbits-2(3)

dsucsuCfgMaintParity		1.3.6.1.4.1.466.6.1.11.1.6
Parity for the Maint. port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), odd(2), even(3)

dsucsuCfgMaintDataBits		1.3.6.1.4.1.466.6.1.11.1.7
Databits for the Maint. port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	databits-7(1), databits-8(2)

dsucsuCfgMaintBaud		1.3.6.1.4.1.466.6.1.11.1.8
Baud rate for the Maint. port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	baud-1200(1), baud-2400(2), baud-4800(3), baud-9600(4)

dsucsuCfgCommTable		1.3.6.1.4.1.466.6.1.12
Communication Port Configuration
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuCfgCommEntry

dsucsuCfgCommEntry		1.3.6.1.4.1.466.6.1.12.1
Communication Port Configuration Object
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuCfgCommEntry

dsucsuCfgCommSlot		1.3.6.1.4.1.466.6.1.12.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuCfgCommNode		1.3.6.1.4.1.466.6.1.12.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuCfgCommChanType		1.3.6.1.4.1.466.6.1.12.1.3
The type of data passed over the Communication port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), nsms(2), ascii(3), alarm(4), ext-event(5)

dsucsuCfgCommFlowCtrl		1.3.6.1.4.1.466.6.1.12.1.4
Flow Control for the Communication port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

dsucsuCfgCommStopBits		1.3.6.1.4.1.466.6.1.12.1.5
Number of Stopbits for the Communication port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	stopbits-1(1), stopbits-1-5(2), stopbits-2(3)

dsucsuCfgCommParity		1.3.6.1.4.1.466.6.1.12.1.6
Parity for the Communication port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), odd(2), even(3)

dsucsuCfgCommDataBits		1.3.6.1.4.1.466.6.1.12.1.7
Databits for the Communication port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	databits-7(1), databits-8(2)

dsucsuCfgCommBaud		1.3.6.1.4.1.466.6.1.12.1.8
Baud rate for the Communication port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	baud-1200(1), baud-2400(2), baud-4800(3), baud-9600(4)

dsucsuCfgBrdTable		1.3.6.1.4.1.466.6.1.13
Network timing for 3000N board.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuCfgBrdEntry

dsucsuCfgBrdEntry		1.3.6.1.4.1.466.6.1.13.1
Board Timing Configuration Object.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuCfgBrdEntry

dsucsuCfgBrdSlot		1.3.6.1.4.1.466.6.1.13.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuCfgBrdNode		1.3.6.1.4.1.466.6.1.13.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuCfgBrdTiming		1.3.6.1.4.1.466.6.1.13.1.3
The Board Level Timing for a 3000N.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	master(1), port1(2), port2(3), port3(4), port4(5)

dsucsuCfgDacsTable		1.3.6.1.4.1.466.6.1.14
OBJECT IDENTIFIER

dsucsuCfgAutoAssignTable		1.3.6.1.4.1.466.6.1.14.1
Automatically assign the proper amount of bandwidth.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuCfgAutoAssignEntry

dsucsuCfgAutoAssignEntry		1.3.6.1.4.1.466.6.1.14.1.1
DACS auto assign Configuration Object.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuCfgAutoAssignEntry

dsucsuConnAutoSlot		1.3.6.1.4.1.466.6.1.14.1.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuConnAutoNode		1.3.6.1.4.1.466.6.1.14.1.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuConnAutoSrcPort		1.3.6.1.4.1.466.6.1.14.1.1.3
Index to the 3000N source port of interest. 3000N supports two DTE-V35/RS-499 DATA ports (P3-P4).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

dsucsuConnAutoStartDS0		1.3.6.1.4.1.466.6.1.14.1.1.4
Port1/2 includes 24 DS0's. This value is the starting DS0 used by the node to allocate DS0s to meet port(3-4)-dte requirements. Sequential, contiguous DS0s are assigned. The number of DS0s required is based upon the DTE Data Rate and DTE Channel Mapping. The node's response to an entry may be gathered by querying dsucsuConnAutoStatus. To assign DS0s in a non-contiguous format, use the CfgEditConnTable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ds0-01(1), ds0-02(2), ds0-03(3), ds0-04(4), ds0-05(5), ds0-06(6), ds0-07(7), ds0-08(8), ds0-09(9), ds0-10(10), ds0-11(11), ds0-12(12), ds0-13(13), ds0-14(14), ds0-15(15), ds0-16(16), ds0-17(17), ds0-18(18), ds0-19(19), ds0-20(20), ds0-21(21), ds0-22(22), ds0-23(23), ds0-24(24), no-current-connections(40), non-continuous-ds0s(41)

dsucsuConnAutoDestPort		1.3.6.1.4.1.466.6.1.14.1.1.5
Selects the port for which DS0s are automatically allocated to one of the T1 network ports. Node software may not allow connection of port1 to port1.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	port1(1), port2(2), port3(3), port4(4), not-connected(33)

dsucsuConnAutoType		1.3.6.1.4.1.466.6.1.14.1.1.6
Defines the type of traffic being transported. The 3000N supports data (1) or voice (2). The selected type will be assigned to all DS0s.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	data(1), voice(2)

dsucsuConnDteRate		1.3.6.1.4.1.466.6.1.14.1.1.7
Data rate of the DTE port. Can be chaged from the CfgDteTable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..1536000

dsucsuConnDteDensity		1.3.6.1.4.1.466.6.1.14.1.1.8
Channel/DS0 format for the DTE port. Can be changed from the CfgDteTable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	bit-7-stuff(56), clear-channel(64)

dsucsuConnDs0Required		1.3.6.1.4.1.466.6.1.14.1.1.9
The number of DS0s required by the node's DTE port. This is based upon the DTE data rate and channel density selections.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..24

dsucsuConnAutoStatus		1.3.6.1.4.1.466.6.1.14.1.1.10
Queries the node's connection status. Code will be returned when a connection set or update is rejected or accepted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	connections-valid(1), connections-not-valid(2), incorrect-bandwidth(3), bandwidth-conflict(4), no-current-connections(5), port-type-valid(6), port-type-invalid(7), start-ds0-valid(8), start-ds0-invalid(9), port-valid(10), port-invalid(11)

dsucsuConnAutoUpdateCmd		1.3.6.1.4.1.466.6.1.14.1.1.11
Updates the connections with the edit buffer. The edit buffer is comprised of any changes sent (set) from the dsucsuCfgAutoAssignEntry.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	update(1)

dsucsuCfgCurrentConnTable		1.3.6.1.4.1.466.6.1.14.2
Retrieves node's active connections assignments for display only. To edit connections, use CfgConnAutoAssign or CfgEditConnTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuCfgCurrentConnections

dsucsuCfgCurrentConnections		1.3.6.1.4.1.466.6.1.14.2.1
An entry in the Current Connections Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuCfgCurrentConnections

dsucsuSlot		1.3.6.1.4.1.466.6.1.14.2.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuNode		1.3.6.1.4.1.466.6.1.14.2.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuT1Index		1.3.6.1.4.1.466.6.1.14.2.1.3
Index to T1 network port of interest. The 3000N supports two NETWORK/DSX-1 ports.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

dsucsuDs0		1.3.6.1.4.1.466.6.1.14.2.1.4
DS0 number 1 through 24 corresponding to the T1 network port index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..24

dsucsuDtePort		1.3.6.1.4.1.466.6.1.14.2.1.5
DS0 assignment for indexed T1 network port. After making any adjustments to the connections, the dsucsuCfgConnUpdateCmd must be sent. Node software may not permit port 1 connections to itself.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	port1(1), port2(2), port3(3), port4(4), not-connected(33)

dsucsuType		1.3.6.1.4.1.466.6.1.14.2.1.6
Defines the type of traffic being transported. The 3000N supports data (1) or voice (2).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	data(1), voice(2)

dsucsuCfgEditConnTable		1.3.6.1.4.1.466.6.1.14.3
Manually assign the proper amount of bandwidth.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuCfgEditConnEntry

dsucsuCfgEditConnEntry		1.3.6.1.4.1.466.6.1.14.3.1
Edits current DS0 assignment. After making any adjustments to the connections, the dsucsuCfgConnUpdateCmd must be sent.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuCfgEditConnEntry

dsucsuConnSlot		1.3.6.1.4.1.466.6.1.14.3.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuConnNode		1.3.6.1.4.1.466.6.1.14.3.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuConnSrcPort		1.3.6.1.4.1.466.6.1.14.3.1.3
Index to the source port of interest. The 3000N supports two NETWORK/DSX-1 and two DTE ports.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

dsucsuConnSrcDs0		1.3.6.1.4.1.466.6.1.14.3.1.4
The source DS0 number 1 through 24 corresponding to the T1 network port index
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..24

dsucsuConnDestPort		1.3.6.1.4.1.466.6.1.14.3.1.5
Index to the destination port of interest. The 3000N supports two NETWORK/DSX-1 and two DTE ports.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	port1(1), port2(2), port3(3), port4(4), not-connected(33)

dsucsuConnDestDs0		1.3.6.1.4.1.466.6.1.14.3.1.6
DS0 assignment for indexed T1 network port. After making any adjustments to the connections, the dsucsuConnUpdateCmd must be sent. Node software may not permit connections between the same port and itself.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ds0-01(1), ds0-02(2), ds0-03(3), ds0-04(4), ds0-05(5), ds0-06(6), ds0-07(7), ds0-08(8), ds0-09(9), ds0-10(10), ds0-11(11), ds0-12(12), ds0-13(13), ds0-14(14), ds0-15(15), ds0-16(16), ds0-17(17), ds0-18(18), ds0-19(19), ds0-20(20), ds0-21(21), ds0-22(22), ds0-23(23), ds0-24(24), no-current-connections(40), non-continuous-ds0s(41)

dsucsuConnType		1.3.6.1.4.1.466.6.1.14.3.1.7
Defines the type of traffic being transported. The 3000N supports data (1) or voice (2).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	data(1), voice(2)

dsucsuConnNumDs0s		1.3.6.1.4.1.466.6.1.14.3.1.8
The total number of Ds0s to be connected. The number of Ds0s must be between 1 and 24.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..24

dsucsuConnSetStatus		1.3.6.1.4.1.466.6.1.14.3.1.9
Displays node status from the last SNMP issed set command.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	connections-valid(1), connections-not-valid(2), incorrect-bandwidth(3), bandwidth-conflict(4), no-current-connections(5), port-type-valid(6), port-type-invalid(7), destination-ds0-valid(8), destination-ds0-invalid(9), port-valid(10), port-invalid(11), num-ds0s-valid(12), num-ds0s-invalid(13)

dsucsuConnConnect		1.3.6.1.4.1.466.6.1.14.3.1.10
Updates the connections with the edit buffer. The edit buffer is comprised of any changes sent (set) from the CfgEditConnTable.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	connect(1), disconnect(2)

dsucsuConnUpdateRequired		1.3.6.1.4.1.466.6.1.14.3.1.11
Displays node status from the last connection update.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	update-not-required(1), update-required(2)

dsucsuConnUpdateCmd		1.3.6.1.4.1.466.6.1.14.3.1.12
Sends the updated connections from the edit buffer to the node. The edit buffer is comprised of any changes sent (set) from the CfgEditConnTable.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	update(1)

dsucsuConnClearEditBuff		1.3.6.1.4.1.466.6.1.14.3.1.13
Removes all changes from edit buffer. The edit buffer is comprised of any changes sent (set) from the CfgEditConnTable.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	clear-edit(1)

dsucsuDiagNetTable		1.3.6.1.4.1.466.6.1.15
A list of Network Diagnostic attributes. Loopbacks, tests and their respective results can be initiated, cancelled and examined.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuDiagNetEntry

dsucsuDiagNetEntry		1.3.6.1.4.1.466.6.1.15.1
A Network Diagnostic entry
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuDiagNetEntry

dsucsuDiagNetSlot		1.3.6.1.4.1.466.6.1.15.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuDiagNetNode		1.3.6.1.4.1.466.6.1.15.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuDiagNetIndex		1.3.6.1.4.1.466.6.1.15.1.3
The network number to be examined for a particular node (3000N only).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2

dsucsuDiagNetLclNetAggLpbk		1.3.6.1.4.1.466.6.1.15.1.4
Enables the operator to control and examine the local aggregate loopback. This loopback occurs on the net side of the local transmit and receive logic. The unit continues to transmit data across the network and also loops the data back to its own receiver circuitry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enableLoopbackMode(1), disableLoopbackMode(2), notApplicable(3)

dsucsuDiagNetLclNetLpbk		1.3.6.1.4.1.466.6.1.15.1.5
Enables the operator to control and examine the local network loopback. This loopback allows the operator to disconnect the side of the network by transmitting the data recovered from the network.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enableLoopbackMode(1), disableLoopbackMode(2), notApplicable(3)

dsucsuDiagNetLclNetPayload		1.3.6.1.4.1.466.6.1.15.1.6
Enables the operator to control and examine the network payload loopback. This loopback occurs on the net side of the local transmit and receive logic. The unit continues to transmit data across the network and also loops the data back to its own receiver circuitry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enableLoopbackMode(1), disableLoopbackMode(2), notApplicable(3)

dsucsuDiagNetLclNetBiDir		1.3.6.1.4.1.466.6.1.15.1.7
Enables the operator to control and examine the local network loopback. This loopback allows the operator to disconnect the side of the network by transmitting the data recovered from the network in both directions.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enableLoopbackMode(1), disableLoopbackMode(2), notApplicable(3)

dsucsuDiagNetRemCsuLpbk		1.3.6.1.4.1.466.6.1.15.1.8
Enables the operator to control and examine the remote CSU loopback. This loopback allows the operator to test the operation of the local channel, the aggregate and the remote CSU.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	transmitLoopUpCode(1), transmitLoopDownCode(2), notApplicable(3)

dsucsuDiagNetRemDsuLpbk		1.3.6.1.4.1.466.6.1.15.1.9
Enables the operator to control and examine the remote aggregate loopback. This loopback allows the operator to test the entire system from the local unit through the network to the remote node's transmit and receive front end.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enableLoopbackMode(1), disableLoopbackMode(2), notApplicable(3)

dsucsuDiagNetEvElapTime		1.3.6.1.4.1.466.6.1.15.1.10
The time elapsed since the Event Test started. The new Event Test commences as soon as the previous Event Test registers are cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

dsucsuDiagNetEvCRC6Err		1.3.6.1.4.1.466.6.1.15.1.11
The number of CRC6 errors encountered during the Event Test period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuDiagNetEvOofErr		1.3.6.1.4.1.466.6.1.15.1.12
The number of Out-Of-Frame errors encountered during the Event Test period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuDiagNetErrEvents		1.3.6.1.4.1.466.6.1.15.1.13
The number of Errored Events encountered during the Event Test period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuDiagNetClearEvReg		1.3.6.1.4.1.466.6.1.15.1.14
Clear all the Event Test registers. Automatically initiates a new Event Test.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	clearRegister(1)

dsucsuDiagDteTable		1.3.6.1.4.1.466.6.1.16
A list of DTE channel diagnostics.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuDiagDteEntry

dsucsuDiagDteEntry		1.3.6.1.4.1.466.6.1.16.1
A DTE channel diagnostic entry
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuDiagDteEntry

dsucsuDiagDteSlot		1.3.6.1.4.1.466.6.1.16.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuDiagDteNode		1.3.6.1.4.1.466.6.1.16.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuDiagDteIndex		1.3.6.1.4.1.466.6.1.16.1.3
The channel number to be examined for a particular node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

dsucsuDiagDteLocalBiDir		1.3.6.1.4.1.466.6.1.16.1.4
This selection displays the status or controls the Local Channel Loopback for the selected channel. This is a local turnaround and is bi-directional.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enableLoopbackMode(1), disableLoopbackMode(2), notApplicable(3)

dsucsuDiagDteLocalPayload		1.3.6.1.4.1.466.6.1.16.1.5
This selection displays the status or controls the Local Payload Channel Loopback for the selected channel.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enableLoopbackMode(1), disableLoopbackMode(2), notApplicable(3)

dsucsuDiagDteRemLpbk		1.3.6.1.4.1.466.6.1.16.1.6
This selection displays the status or controls the Channel Remote Loopback for the selected channel. This loopback transmits a code to the remote node which will enable or disable a diagnostic loopback at the addressed channel.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enableLoopbackMode(1), disableLoopbackMode(2), notApplicable(3)

dsucsuDiagDteBertTestAct		1.3.6.1.4.1.466.6.1.16.1.7
BERT test related actions: a: Starts a BERT test on a channel, b: Stops a BERT test on a channel, c: Inject Errors while the BERT test is running, d: Clears BERT test errors.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	startBertTest(1), stopBertTest(2), injectErrorBertTest(3), clearErrorBertTest(4)

dsucsuDiagDteBertHourStrt		1.3.6.1.4.1.466.6.1.16.1.8
Displays the hour that the BERT test started.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..23

dsucsuDiagDteBertMinStrt		1.3.6.1.4.1.466.6.1.16.1.9
Displays th minute that BERT test started.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..59

dsucsuDiagDteBertTimeElaps		1.3.6.1.4.1.466.6.1.16.1.10
Elapsed time since the BERT Test started
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

dsucsuDiagDteBertErrors		1.3.6.1.4.1.466.6.1.16.1.11
Number of BERT test errors encountered during the BERT Test.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuDiagFrmTable		1.3.6.1.4.1.466.6.1.17
A list of framed channel diagnostics.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuDiagFrmEntry

dsucsuDiagFrmEntry		1.3.6.1.4.1.466.6.1.17.1
A framed channel diagnostic entry
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuDiagFrmEntry

dsucsuDiagFrmSlot		1.3.6.1.4.1.466.6.1.17.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuDiagFrmNode		1.3.6.1.4.1.466.6.1.17.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuDiagFrmIndex		1.3.6.1.4.1.466.6.1.17.1.3
The channel number to be examined for a particular node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

dsucsuDiagFrmLclLpbk		1.3.6.1.4.1.466.6.1.17.1.4
This selection displays the status or controls the Local Channel Loopback for the selected channel. This is a local turnaround and is bi-directional.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enableLoopbackMode(1), disableLoopbackMode(2), notApplicable(3)

dsucsuDiagFrmLclPayload		1.3.6.1.4.1.466.6.1.17.1.5
This selection displays the status or controls the Channel Remote Loopback for the selected channel. This loopback transmits a code to the remote node which will enable or disable a diagnostic loopback at the addressed channel. This selection is applicable only for DSX type channels.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enableLoopbackMode(1), disableLoopbackMode(2), notApplicable(3)

dsucsuDiagFrmLclBiDir		1.3.6.1.4.1.466.6.1.17.1.6
This selection displays the status or controls the DSX Loopback for the selected channel. This selection is applicable only for DSX channels.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enableLoopbackMode(1), disableLoopbackMode(2), notApplicable(3)

dsucsuDiagFrmRemLpbk		1.3.6.1.4.1.466.6.1.17.1.7
This selection displays the status or controls the Local Channel Loopback for the selected channel. This loopback transmits a code to the remote node which will enable or disable a diagnostic loopback at the addressed channel. This selection is applicable only for DSX channels.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	transmitLoopUpCode(1), transmitLoopDownCode(2), notApplicable(3)

dsucsuDiagFrmLclDte		1.3.6.1.4.1.466.6.1.17.1.8
This selection displays the status or controls the Local Channel Loopback for the selected channel. This is a local turnaround and is bi-directional. This selection is applicable only for CSU type channels.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enableLoopbackMode(1), disableLoopbackMode(2), notApplicable(3)

dsucsuDiagFrmLclDte2		1.3.6.1.4.1.466.6.1.17.1.9
This selection displays the status or controls the Channel Remote Loopback for the selected channel. This loopback transmits a code to the remote node which will enable or disable a diagnostic loopback at the addressed channel. This selection is applicable only for CSU type channels.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enableLoopbackMode(1), disableLoopbackMode(2), notApplicable(3)

dsucsuDiagFrmBertTestAct		1.3.6.1.4.1.466.6.1.17.1.10
BERT test related actions: a: Starts a BERT test on a channel, b: Stops a BERT test on a channel, c: Inject Errors while the BERT test is running, d: Clears BERT test errors.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	startBertTest(1), stopBertTest(2), injectErrorBertTest(3), clearErrorBertTest(4)

dsucsuDiagFrmEvElapTime		1.3.6.1.4.1.466.6.1.17.1.11
The time elapsed since the PBX Event Test started. This selection is applicable only for PBX channels.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

dsucsuDiagFrmEvBpvErr		1.3.6.1.4.1.466.6.1.17.1.12
The number of Bipolar Violations encountered during the Event Test. This selection is applicable only for PBX channels.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuDiagFrmEvOofErr		1.3.6.1.4.1.466.6.1.17.1.13
The number of Out-Of-Frame Errors encountered during the Event Test. This selection is applicable only for PBX channels.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuDiagFrmFrameErr		1.3.6.1.4.1.466.6.1.17.1.14
The number of Frame Errors encountered during the Event Test. This selection is applicable only for PBX channels.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuDiagFrmClearEvReg		1.3.6.1.4.1.466.6.1.17.1.15
Clears all the PBX Event Test registers. This selection is applicable only for PBX channels.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	clearRegister(1)

dsucsuDiagAuxTable		1.3.6.1.4.1.466.6.1.18
Auxillary Channel Diagnostics
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuDiagAuxEntry

dsucsuDiagAuxEntry		1.3.6.1.4.1.466.6.1.18.1
Auxilary diagnostic entry
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuDiagAuxEntry

dsucsuDiagAuxSlot		1.3.6.1.4.1.466.6.1.18.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuDiagAuxNode		1.3.6.1.4.1.466.6.1.18.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuDiagAuxChAStatus		1.3.6.1.4.1.466.6.1.18.1.3
Status of Supervisory link channel A.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	down(1), sync(2), off(3)

dsucsuDiagAuxChBStatus		1.3.6.1.4.1.466.6.1.18.1.4
Status of Supervisory Link Channel B.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	down(1), sync(2), off(3)

dsucsuDiagAuxFdlStatus		1.3.6.1.4.1.466.6.1.18.1.5
Status of Facility Data Link (PORT1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	down(1), sync(2), off(3)

dsucsuDiagAuxFdl2Status		1.3.6.1.4.1.466.6.1.18.1.6
Status of Facility Data Link (PORT2).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	down(1), sync(2), off(3)

dsucsuDiagAuxMaintStatus		1.3.6.1.4.1.466.6.1.18.1.7
The Maint. Port Supervisory link status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	down(1), sync(2), off(3)

dsucsuDiagAuxCommStatus		1.3.6.1.4.1.466.6.1.18.1.8
The Communications port Supervisory link status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	down(1), sync(2), off(3)

dsucsuDiagPortTable		1.3.6.1.4.1.466.6.1.19
Port Specific Display only Diagnostics
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuDiagPortEntry

dsucsuDiagPortEntry		1.3.6.1.4.1.466.6.1.19.1
Port Specific Display only entry
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuDiagPortEntry

dsucsuDiagPortSlot		1.3.6.1.4.1.466.6.1.19.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuDiagPortNode		1.3.6.1.4.1.466.6.1.19.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuDiagPortIndex		1.3.6.1.4.1.466.6.1.19.1.3
The port index: unique per port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

dsucsuDiagPortType		1.3.6.1.4.1.466.6.1.19.1.4
The port type (NET/DSX/PBX/V.35/RS-449).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), network(2), dsx(3), pbx(4), rs449(5), rs232(6), mil188(7), v35(8), dte(9), tdm(10)

dsucsuDiagPortStatus		1.3.6.1.4.1.466.6.1.19.1.5
Current status condition of a particular port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	clearOK(1), redAlarm(2), yellowAlarm(3), syncLoss(4), bpvAlarm(5), blueAlarm(6), test(7), timeout(8), notApplicable(9)

dsucsuIntervalTable		1.3.6.1.4.1.466.6.1.20
The table contains various ESF stats collected over the last 96 15-minute intervals (24 hours total time).
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuIntervalEntry

dsucsuIntervalEntry		1.3.6.1.4.1.466.6.1.20.1
Entry in the table of ESF interval stats.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuIntervalEntry

dsucsuIntervalSlot		1.3.6.1.4.1.466.6.1.20.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuIntervalNode		1.3.6.1.4.1.466.6.1.20.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuIntervalPort		1.3.6.1.4.1.466.6.1.20.1.3
The port index: unique per port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2

dsucsuIntervalNum		1.3.6.1.4.1.466.6.1.20.1.4
The sequence number for the selected interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..96

dsucsuIntervalESs		1.3.6.1.4.1.466.6.1.20.1.5
The number of Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers during the selected interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuIntervalSESs		1.3.6.1.4.1.466.6.1.20.1.6
The number of Severely Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers during the selected interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuIntervalBPVs		1.3.6.1.4.1.466.6.1.20.1.7
The number of Bipolar Violations (as defined in Bell Publication 62411) encountered in the user registers during the selected interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuIntervalFSs		1.3.6.1.4.1.466.6.1.20.1.8
The number of Failed Seconds (as defined in Bell Publication 62411) encountered in the user registers during the selected interval.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Counter

dsucsuCurrentTable		1.3.6.1.4.1.466.6.1.22
The table contains various ESF stats collected over the current 15-minute interval.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuCurrentEntry

dsucsuCurrentEntry		1.3.6.1.4.1.466.6.1.22.1
Entry in the table of the current ESF stats.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuCurrentEntry

dsucsuCurrentSlot		1.3.6.1.4.1.466.6.1.22.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuCurrentNode		1.3.6.1.4.1.466.6.1.22.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuCurrentPort		1.3.6.1.4.1.466.6.1.22.1.3
The port index: unique per port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2

dsucsuCurrentESs		1.3.6.1.4.1.466.6.1.22.1.4
The number of Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers during the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuCurrentSESs		1.3.6.1.4.1.466.6.1.22.1.5
The number of Severely Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers during the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuCurrentBPVs		1.3.6.1.4.1.466.6.1.22.1.6
The number of Bipolar Violations (as defined in Bell Publication 62411) encountered in the user registers during the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuCurrentSECs		1.3.6.1.4.1.466.6.1.22.1.7
Number of seconds elapsed in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuCurrentStatus		1.3.6.1.4.1.466.6.1.22.1.8
Indication of whether statistics have been halted during current 15 minute interval.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	frozen(1), unfrozen(2)

dsucsuTotalTable		1.3.6.1.4.1.466.6.1.24
The table contains the cummulative sum of various ESF stats collected over the last 24 hour period.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DsucsuTotalEntry

dsucsuTotalEntry		1.3.6.1.4.1.466.6.1.24.1
Entry in the table of the total ESF stats.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DsucsuTotalEntry

dsucsuTotalSlot		1.3.6.1.4.1.466.6.1.24.1.1
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuTotalNode		1.3.6.1.4.1.466.6.1.24.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuTotalPort		1.3.6.1.4.1.466.6.1.24.1.3
The port index: unique per port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2

dsucsuTotalESs		1.3.6.1.4.1.466.6.1.24.1.4
The number of Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers in the last 24 hour period (96 intervals).
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuTotalSESs		1.3.6.1.4.1.466.6.1.24.1.5
The number of Severely Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers in the last 24 hour period (96 intervals).
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuTotalBPVs		1.3.6.1.4.1.466.6.1.24.1.6
The number of Bipolar Violations (as defined in Bell Publication 62411) encountered in the user registers in the last 24 hour period (96 intervals).
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuTotalSECs		1.3.6.1.4.1.466.6.1.24.1.7
Number of seconds elapsed in the last 24 hours. This will be the maximum value of 86400 unless the addressed node was brought on-line with the this period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

dsucsuTotalStatus		1.3.6.1.4.1.466.6.1.24.1.8
Indication of whether statistics have been halted in the last 24 hours.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	frozen(1), unfrozen(2)

dsucsuAlarmType		1.3.6.1.4.1.466.6.1.25
The type of alarms that are generated on the node
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yellow-Alarm(1), sync-Alarm(2), red-Alarm(3), bpv-Alarm(4), confg-Activated(5), confg-Stored(6), pbx1-Yellow-Alarm(7), pbx1-Red-Alarm(8), pbx1-Los-Alarm(9), pbx3-Yellow-Alarm(10), pbx3-Red-Alarm(11), pbx3-Los-Alarm(12), ais-Alarm(13), node-communications-lost(14), sync-ais-Alarm(15), ts16-ais-Alarm(16), ts16-Los-Alarm(17), remote-Alarm(18), remote-ts16-Alarm(19), frame-Error-Alarm(20), crc4-Error-Alarm(21), port2-Yellow-Alarm(22), port2-Sync-Alarm(23), port2-Red-Alarm(24), port2-Bpv-Alarm(25), power-Supply-Alarm(26), fan-one-Failure(27), fan-two-Failure(28), yellow-Alarm-Clear(29), sync-Alarm-Clear(30), red-Alarm-Clear(31), bpv-Alarm-Clear(32), pbx1-Yellow-Alarm-Clear(33), pbx1-Red-Alarm-Clear(34), pbx1-Los-Alarm-Clear(35), pbx3-Yellow-Alarm-Clear(36), pbx3-Red-Alarm-Clear(37), pbx3-Los-Alarm-Clear(38), ais-Alarm-Clear(39), node-communications-restored(40), sync-ais-Alarm-Clear(41), ts16-ais-Alarm-Clear(42), ts16-Los-Alarm-Clear(43), remote-Alarm-Clear(44), remote-ts16-Alarm-Clear(45), frame-Error-Alarm-Clear(46), crc4-Error-Alarm-Clear(47), port2-Yellow-Alarm-Clear(48), port2-Sync-Alarm-Clear(49), port2-Red-Alarm-Clear(50), port2-Bpv-Alarm-Clear(51), power-Supply-Alarm-Clear(52), fan-one-Failure-Clear(53), fan-two-Failure-Clear(54)

dsucsuAlarmSlot		1.3.6.1.4.1.466.6.1.26
The PC port to which the TyView node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

dsucsuAlarmNode		1.3.6.1.4.1.466.6.1.27
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

dsucsuAlarmName		1.3.6.1.4.1.466.6.1.28
The name of the node which triggered the alarm.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..8)

tyviewSysTable		1.3.6.1.4.1.466.6.2.1
OBJECT IDENTIFIER

tyviewSysRevSw		1.3.6.1.4.1.466.6.2.1.1
The TyView software revision.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

tyviewSysName		1.3.6.1.4.1.466.6.2.1.2
The name given to TyView system.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

tyviewSysId		1.3.6.1.4.1.466.6.2.1.3
The TyView system ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

tyviewSysTimeOutFactor		1.3.6.1.4.1.466.6.2.1.4
The TyView timeout factor.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

tyviewSysObjectId		1.3.6.1.4.1.466.6.2.1.5
The Tyview Domain Object Identifier.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

tyviewSysSlotNumber		1.3.6.1.4.1.466.6.2.1.6
The Physical Slot Number the NETEXEC is installed in.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

tyviewSysClearDatabase		1.3.6.1.4.1.466.6.2.1.7
Clear the node database.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	clearDatabase(1)

tyviewSysGetCommName		1.3.6.1.4.1.466.6.2.1.8
The GET community name.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

tyviewSysSetCommName		1.3.6.1.4.1.466.6.2.1.9
The SET community name.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

tyviewSysTrapCommName		1.3.6.1.4.1.466.6.2.1.10
The TRAP community name.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

tyviewSysN1TrapDest		1.3.6.1.4.1.466.6.2.1.11
The first Trap IP Destination.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

tyviewSysN2TrapDest		1.3.6.1.4.1.466.6.2.1.12
The second Trap IP Destination.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

tyviewSysDate		1.3.6.1.4.1.466.6.2.1.13
The NETEXEC date (mm/dd/yy).
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..8)

tyviewSysTime		1.3.6.1.4.1.466.6.2.1.14
The NETEXEC time (hh:mm).
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..5)

tyviewSysMjrMnrLED		1.3.6.1.4.1.466.6.2.1.15
The Major/Minor LED status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	led-Off(1), led-Red(2), led-Green(3), led-Yellow(4), led-RedYellow(5)

tyviewSysFanPSLED		1.3.6.1.4.1.466.6.2.1.16
The Fan / Power Supply LED status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	led-Off(1), led-Red(2), led-Green(3), led-Yellow(4), led-RedYellow(5)

tyviewSysCtlrLED		1.3.6.1.4.1.466.6.2.1.17
The Controller LED status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	led-Off(1), led-Red(2), led-Green(3), led-Yellow(4), led-RedYellow(5)

tyviewSysSlipLED		1.3.6.1.4.1.466.6.2.1.18
The SLIP LED status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	led-Off(1), led-Red(2), led-Green(3), led-Yellow(4), led-RedYellow(5)

tyviewSysCtlChLED		1.3.6.1.4.1.466.6.2.1.19
The Control Channel LED status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	led-Off(1), led-Red(2), led-Green(3), led-Yellow(4), led-RedYellow(5)

tyviewSysTDMLED		1.3.6.1.4.1.466.6.2.1.20
The TDM LED status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	led-Off(1), led-Red(2), led-Green(3), led-Yellow(4), led-RedYellow(5)

tyviewSysMaintUseage		1.3.6.1.4.1.466.6.2.1.21
The Maintenance Port useage specification.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), command(2), slip(3), tp-modem(4), diagnostic(5), ppp(6)

tyviewSysMaintDataBits		1.3.6.1.4.1.466.6.2.1.22
The Maintenance Port databits specification.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	databits-7(1), databits-8(2)

tyviewSysMaintRate		1.3.6.1.4.1.466.6.2.1.23
The Maintenance Port rate specification.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	rate-1200(1), rate-2400(2), rate-4800(3), rate-9600(4), rate-19200(5)

tyviewSysMaintStopBits		1.3.6.1.4.1.466.6.2.1.24
The Maintenance Port stopbits specification.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	stopbits-1(1), stopbits-2(2)

tyviewSysMaintParity		1.3.6.1.4.1.466.6.2.1.25
The Maintenance Port parity specification.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), odd(2), even(3)

tyviewSysMaintMtu		1.3.6.1.4.1.466.6.2.1.26
The Maintenance Port maximum trans unit size.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

tyviewSysMaintCompression		1.3.6.1.4.1.466.6.2.1.27
The Maintenance Port compression specification.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

tyviewSysMaintSubnetMask		1.3.6.1.4.1.466.6.2.1.28
The Maintenance Port subnet mask.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

tyviewSysMaintLocalIP		1.3.6.1.4.1.466.6.2.1.29
The Maintenance Port local IP address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

tyviewSysMaintPeerIP		1.3.6.1.4.1.466.6.2.1.30
The Maintenance Port peer IP address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

tyviewSysComUseage		1.3.6.1.4.1.466.6.2.1.31
The Com Port useage specification.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), command(2), slip(3), tp-modem(4), diagnostic(5), ppp(6)

tyviewSysComDataBits		1.3.6.1.4.1.466.6.2.1.32
The Com Port databits specification.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	databits-7(1), databits-8(2)

tyviewSysComRate		1.3.6.1.4.1.466.6.2.1.33
The Com Port rate specification.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	rate-1200(1), rate-2400(2), rate-4800(3), rate-9600(4), rate-19200(5)

tyviewSysComStopBits		1.3.6.1.4.1.466.6.2.1.34
The Com Port stopbits specification.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	stopbits-1(1), stopbits-2(2)

tyviewSysComParity		1.3.6.1.4.1.466.6.2.1.35
The Com Port parity specification.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), odd(2), even(3)

tyviewSysComMtu		1.3.6.1.4.1.466.6.2.1.36
The Com Port maximum trans unit size.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

tyviewSysComCompression		1.3.6.1.4.1.466.6.2.1.37
The Com Port compression specification.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

tyviewSysComSubnetMask		1.3.6.1.4.1.466.6.2.1.38
The Com Port subnet mask.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

tyviewSysComLocalIP		1.3.6.1.4.1.466.6.2.1.39
The Com Port local IP address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

tyviewSysComPeerIP		1.3.6.1.4.1.466.6.2.1.40
The Com Port peer IP address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

tyviewSysTelnetEna		1.3.6.1.4.1.466.6.2.1.41
The Telnet log-in enable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

tyviewSysTelnetTO		1.3.6.1.4.1.466.6.2.1.42
The Telnet auto-logout timeout (minutes).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

tyviewSysClrMjrMin		1.3.6.1.4.1.466.6.2.1.43
Clear major/minor alarm window / LED.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	clearMajorMinor(1)

tyviewDatabaseTable		1.3.6.1.4.1.466.6.2.2
A list of tyview database entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TyviewDatabaseEntry

tyviewDatabaseEntry		1.3.6.1.4.1.466.6.2.2.1
System Object for TyView Database
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TyviewDatabaseEntry

tyviewDatabaseSlot		1.3.6.1.4.1.466.6.2.2.1.1
The PC port to which the node is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

tyviewDatabaseNode		1.3.6.1.4.1.466.6.2.2.1.2
The node ID: unique per port ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

tyviewDatabaseName		1.3.6.1.4.1.466.6.2.2.1.3
The unique name of the node.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..8)

tyviewDatabaseStatus		1.3.6.1.4.1.466.6.2.2.1.4
The last comm status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), timeout(2), error(3)

tyviewBroadcastTable		1.3.6.1.4.1.466.6.2.3
OBJECT IDENTIFIER

tyviewBroadcastSetTime		1.3.6.1.4.1.466.6.2.3.1
Broadcast the time to all nodes.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	setTime(1)

tyviewBroadcastForwardAlarms		1.3.6.1.4.1.466.6.2.3.2
Broadcast alarm forwarding.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	forwardAlarms(1)

tyviewBroadcastClearLoopbacks		1.3.6.1.4.1.466.6.2.3.3
Broadcast Clearing of loopbacks.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	clearNetLoopbacks(1), clearChanLoopbacks(2)

tyviewTPTable		1.3.6.1.4.1.466.6.2.4
A list of Threshold Processing records.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TyviewTPEntry

tyviewTPEntry		1.3.6.1.4.1.466.6.2.4.1
System Object for Threshold Processing
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TyviewTPEntry

tyviewTPRecord		1.3.6.1.4.1.466.6.2.4.1.1
The Threshold Processing record referenced.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..25

tyviewTPMonNodeMode		1.3.6.1.4.1.466.6.2.4.1.2
The mode used for monitoring nodes.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), all-nodes(2), node-specific(3)

tyviewTPNode		1.3.6.1.4.1.466.6.2.4.1.3
The node name for node-specific monitoring.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..8)

tyviewTPAlarmType		1.3.6.1.4.1.466.6.2.4.1.4
The alarm type used to trigger.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	major(1), minor(2), all(3)

tyviewTPTriggerEvent		1.3.6.1.4.1.466.6.2.4.1.5
The event type used to trigger.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	alarm-on(1), alarm-instance(2)

tyviewTPInstance		1.3.6.1.4.1.466.6.2.4.1.6
The alarm instance used to trigger.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

tyviewTPInterval		1.3.6.1.4.1.466.6.2.4.1.7
The alarm interval used to trigger.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

tyviewTPEventAction		1.3.6.1.4.1.466.6.2.4.1.8
The phone number dialed when triggered.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

tyviewTPDryContact		1.3.6.1.4.1.466.6.2.4.1.9
The type of Dry Contact when triggered.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	dry-contact-off(1), dry-contact-major(2), dry-contact-minor(3)

tyviewTPClearDryContact		1.3.6.1.4.1.466.6.2.4.1.10
Clear major/minor Dry Contact.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	clear-major(1), clear-minor(2)

dsucsuTrap		0
A dsucsuTrap trap signifies that the sending node had its `dsucsuAlarmType` variable modified.
TRAP-TYPE