NBASE-EXP-MIB
File:
NBASE-EXP-MIB.mib (8608 bytes)
Imported modules
Imported symbols
Defined Types
| NbsExpPortEntry |
|
| SEQUENCE |
|
|
|
| |
nbsExpPortTblPortNumber |
INTEGER |
|
| |
nbsExpPortTblHwType |
INTEGER |
|
| |
nbsExpPortTblSwType |
INTEGER |
|
| |
nbsExpPortTblSquall |
DisplayString |
|
| |
nbsExpPortTblHwVersion |
DisplayString |
|
| |
nbsExpPortTblMCodeVrsn |
DisplayString |
|
| |
nbsExpPortTblSwVersion |
DisplayString |
|
| |
nbsExpPortTblStatus |
INTEGER |
|
| |
nbsExpPortTftpSwFileName |
DisplayString |
|
| |
nbsExpPortInitDownload |
INTEGER |
|
| NbsAtmLanePortEntry |
|
| SEQUENCE |
|
|
|
| |
nbsAtmLanePortNumber |
INTEGER |
|
| |
laneLecsAddress |
OCTET STRING |
Size(20) |
| |
sonetCircuitId |
DisplayString |
|
| |
signalingStatus |
INTEGER |
|
| NbsFddiPortEntry |
|
| SEQUENCE |
|
|
|
| |
nbsFddiPortNumber |
INTEGER |
|
| |
nbsFddiSmtIndex |
INTEGER |
|
Defined Values
| nbase |
1.3.6.1.4.1.629 |
| OBJECT IDENTIFIER |
|
|
|
| nbsExpPortMaxNum |
1.3.6.1.4.1.629.1.16.1.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nbsExpPortTable |
1.3.6.1.4.1.629.1.16.1.2 |
| A table of Expansion Ports in the devices. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
NbsExpPortEntry |
|
| nbsExpPortEntry |
1.3.6.1.4.1.629.1.16.1.2.1 |
| Contains the features general to NBase Expansion port modules. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NbsExpPortEntry |
|
|
| nbsExpPortTblPortNumber |
1.3.6.1.4.1.629.1.16.1.2.1.1 |
| The Port Number of the Expansion Port. This port number is the same
as the port number used for all other purposes. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nbsExpPortTblHwType |
1.3.6.1.4.1.629.1.16.1.2.1.2 |
| The Hardware Type of the Expansion port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), cpu-card(2) |
|
| nbsExpPortTblSwType |
1.3.6.1.4.1.629.1.16.1.2.1.3 |
| The Software Type of the Expansion port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), atm-lec(2), atm-mpoa(3), fddi(4), wan-router(5) |
|
| nbsExpPortTblSquall |
1.3.6.1.4.1.629.1.16.1.2.1.4 |
| The Squall Module, if any, attached to this Expansion Port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| nbsExpPortTblStatus |
1.3.6.1.4.1.629.1.16.1.2.1.8 |
| The status of the Expansion Port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), ok(2), error(3) |
|
| nbsExpPortTftpSwFileName |
1.3.6.1.4.1.629.1.16.1.2.1.9 |
| The Software File Name for the Expansion Port. This is the remote
file name string provided to the TFTP client application
when starting a Firmware Update process.
This value is stored in the system NVRAM as well as in
the SNMP Agent current configuration. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| nbsExpPortInitDownload |
1.3.6.1.4.1.629.1.16.1.2.1.10 |
| This is used to initiate a download session from the TFTP server.
The filename which will be requested my be modified via the
nbsExpPortTftpSwFileName object.
Note that the only writeable value is active(1), if no session is
active at this moment. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
active(1), inactive(2) |
|
| nbsAtmLanePortMaxNum |
1.3.6.1.4.1.629.1.16.2.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nbsAtmLanePortTable |
1.3.6.1.4.1.629.1.16.2.2 |
| A table of Lan Emulation Clients, indexed by the physical port number. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
NbsAtmLanePortEntry |
|
| nbsAtmLanePortEntry |
1.3.6.1.4.1.629.1.16.2.2.1 |
| Contains the features specific to the ATM Lan Emulation Client. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NbsAtmLanePortEntry |
|
|
| nbsAtmLanePortNumber |
1.3.6.1.4.1.629.1.16.2.2.1.1 |
| The Port Number of the Lan Emulation Client. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| laneLecsAddress |
1.3.6.1.4.1.629.1.16.2.2.1.2 |
| The ATM Address (20 Octet string) of the desired Lan Emulation
Configuration Server. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(20) |
|
| sonetCircuitId |
1.3.6.1.4.1.629.1.16.2.2.1.3 |
| The Circuit Identifier, if any for the SONET interface. This
information is typically provided by the owner of the SONET
physical line. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| signalingStatus |
1.3.6.1.4.1.629.1.16.2.2.1.4 |
| The Status of the ATM UNI signaling between the uplink and
the ATM switch |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2) |
|
| nbsFddiPortMaxNum |
1.3.6.1.4.1.629.1.16.3.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nbsFddiPortTable |
1.3.6.1.4.1.629.1.16.3.2 |
| A table of FDDI ports, indexed by the physical port number. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
NbsFddiPortEntry |
|
| nbsFddiPortEntry |
1.3.6.1.4.1.629.1.16.3.2.1 |
| Contains the features specific to the FDDI Port. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NbsFddiPortEntry |
|
|
| nbsFddiPortNumber |
1.3.6.1.4.1.629.1.16.3.2.1.1 |
| The Port Number of the Lan Emulation Client. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| nbsFddiSmtIndex |
1.3.6.1.4.1.629.1.16.3.2.1.2 |
| The FDDI MIB SMT index number of this port |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|