MWRM-RADIO-MIB

File: MWRM-RADIO-MIB.mib (169814 bytes)

Imported modules

SNMPv2-SMI RFC1213-MIB SNMPv2-TC
MWRM-UNIT-MIB

Imported symbols

Counter64 enterprises IpAddress
DisplayString RowStatus MacAddress
OBJECT-TYPE EnableDisable EnableDisableSMI2
OffOn MetricImperial AllowedNotAllowed
ProgressStatus Severity NoYes
DownUp SupportedNotsupported TrailIfType
PmTableType RateMbps HalfFull
BerLevel SignalLevel LoopbackType
QueueName RadioId RfuId
SwCommand TrailProtectedType ClockSrc
SlotId Integrity GreenYellow
InputSeverity SwCommandTimer

Defined Types

MuteOnOff  
INTEGER on(2), off(3)    

RfuGrade  
INTEGER unknown(0), grade-1(1), grade-2(2), grade-3(3)    

MrmcBitRate  
INTEGER 1..1000000000    

MrmcScriptId  
INTEGER 1..999999    

QamOrder  
INTEGER 0..2048    

MrmcProfile  
INTEGER profile-0(0), profile-1(1), profile-2(2), profile-3(3), profile-4(4), profile-5(5), profile-6(6), profile-7(7), profile-8(8), profile-9(9), profile-10(10), profile-11(11), profile-12(12), profile-13(13), profile-14(14), profile-15(15)    

ThresholdExponent  
INTEGER n1e-1(0), n1e-2(1), n1e-3(2), n1e-4(3), n1e-5(4), n1e-6(5), n1e-7(6), n1e-8(7), n1e-9(8), n1e-11(10), n1e-12(11), n1e-13(12), n1e-14(13), n1e-15(14), n1e-16(15), n1e-17(16), n1e-18(17), n1e-0(18)    

RFUSoftwareInstallStat  
INTEGER ready(0), verifying-files(1), transferring-files(2), installation-in-progress(3), installation-success(4), installation-failure(5)    

RadioProtectionCmd  
INTEGER clear(0), manual-switch(1), force-switch(2), lockout(3)    

RfuMajorType  
INTEGER unknown(0), rfu-HC(1), rfu-HP(2), rfu-SP(3), rfu-C(4), rfu-H(5), rfu-HP-2(6), rfu-A(7), rfu-D(8)    

Copy2mate  
INTEGER noAction(0), copyToMate(1)    

XpicState  
INTEGER init(0), xpicDisabled(1), singleChannel(2), xrsmDisabled(3), xrsmRecovery(4), xpicIdle(5)    

HcModeType  
INTEGER legacy(0), disabled(1), layer2(2), mpls(3), layer3(4), layer4(5), tunnel(6), tunnel-layer3(7), tunnel-layer4(8)    

EnhancedHCExclRuleType  
INTEGER vlan(0), mac-da(1), mac-sa(2), ethertype(3), flow-type(4)    

HcType  
INTEGER legacy(0), no-compression(1), multi-layer-header-compression(2), deep-header-compression(3)    

CommunicationChannel  
INTEGER ftp(0), sftp(1), http(2), https(3)    

FalseTrue  
INTEGER false(0), true(1)    

WaysideBandwidth  
INTEGER n0(0), n64(64), n128(128), n192(192), n256(256), n320(320), n384(384), n448(448), n512(512), n1024(1024), n2048(2048)    

GenEquipRfuStatusEntry  
SEQUENCE    
  genEquipRfuStatusId RfuId
  genEquipRfuStatusRxLevel INTEGER
  genEquipRfuStatusTxLevel INTEGER
  genEquipRfuStatusTemperature INTEGER
  genEquipRfuStatusRunningVersion DisplayString
  genEquipRfuStatusRFUType INTEGER
  genEquipRfuStatusRFUGrade RfuGrade
  genEquipRfuStatusTxRxFreqSeparation INTEGER
  genEquipRfuStatusRFUMode INTEGER
  genEquipRfuStatusRxLevelDiversity INTEGER
  genEquipRfuStatusRxLevelCombined INTEGER
  genEquipRfuStatusAutoDelayCalStatus INTEGER
  genEquipRfuStatusRFUSerialNumber DisplayString
  genEquipRfuStatusRFUPartNumber DisplayString
  genEquipRfuStatusRFUmateCarrier INTEGER
  genEquipRfuStatusRFUMaxTxFreq INTEGER
  genEquipRfuStatusRFUMinTxFreq INTEGER
  genEquipRfuStatusRFUMaxRxFreq INTEGER
  genEquipRfuStatusRFUMinRxFreq INTEGER
  genEquipRfuStatusInstallation INTEGER
  genEquipRfuStatusDataSciErrors INTEGER
  genEquipRfuStatusDeviceError INTEGER
  genEquipRfuStatusBand INTEGER
  genEquipRfuStatusPATemp INTEGER
  genEquipRfuStatusTxMute OffOn
  genEquipRfuStatusMinTxLevel INTEGER
  genEquipRfuStatusMaxTxLevel INTEGER
  genEquipRfuStatusMinBW INTEGER
  genEquipRfuStatusMaxBW INTEGER
  genEquipRfuStatusCommunication DownUp
  genEquipRfuCfgATPCOverrideTimerState INTEGER
  genEquipRfuStatusIfCombSupport SupportedNotsupported
  genEquipRfuStatusMinRxLevel INTEGER
  genEquipRfuStatusMaxRxLevel INTEGER

GenEquipRfuCfgEntry  
SEQUENCE    
  genEquipRfuCfgId RfuId
  genEquipRfuCfgMaxTxLevel INTEGER
  genEquipRfuCfgTxFreq INTEGER
  genEquipRfuCfgRxFreq INTEGER
  genEquipRfuCfgATPCAdmin EnableDisable
  genEquipRfuCfgATPCRefRSL INTEGER
  genEquipRfuCfgMuteTx MuteOnOff
  genEquipRfuCfgRSLConnSrc INTEGER
  genEquipRfuCfgDelayCal INTEGER
  genEquipRfuCfgLoopback LoopbackType
  genEquipRfuCfgLogAdmin EnableDisable
  genEquipRfuCfgClearComDeviceError OffOn
  genEquipRfuCfgGreenModeAdmin EnableDisable
  genEquipRfuCfgGreenModeReferenceLevel INTEGER
  genEquipRfuCfgATPCOverrideTxLevel INTEGER
  genEquipRfuCfgATPCOverrideTimeout INTEGER
  genEquipRfuCfgATPCOverrideTimerCounter INTEGER
  genEquipRfuCfgATPCOverrideTimerCancel OffOn

GenEquipRfuUploadEntry  
SEQUENCE    
  genEquipRfuUploadId RadioId
  genEquipRfuUploadSwCommand INTEGER
  genEquipRfuUploadSwStatus INTEGER
  genEquipRfuUploadCounter INTEGER

GenEquipRfuSwInstallEntry  
SEQUENCE    
  genEquipRfuSwInstallIfIndex INTEGER
  genEquipRfuSwInstallOperation INTEGER
  genEquipRfuSwInstallTimedInstallation NoYes
  genEquipRfuSwInstallTimer INTEGER

GenEquipRfuInstalledVersionsEntry  
SEQUENCE    
  genEquipRfuInstalledVersionsIfIndex INTEGER
  genEquipRfuInstalledVersionsDSP DisplayString
  genEquipRfuInstalledVersionsConfigurations DisplayString
  genEquipRfuInstalledVersionsConstants DisplayString
  genEquipRfuInstalledVersionsScripts DisplayString
  genEquipRfuInstalledVersionsFirmware DisplayString

GenEquipRfuSwStatusEntry  
SEQUENCE    
  genEquipRfuSwStatusIfIndex INTEGER
  genEquipRfuSwStatusCurrentState RFUSoftwareInstallStat
  genEquipRfuSwStatusProgress INTEGER

GenEquipRfuRunningVersionsEntry  
SEQUENCE    
  genEquipRfuRunningVersionsIfIndex INTEGER
  genEquipRfuRunningVersionsDSP DisplayString
  genEquipRfuRunningVersionsConfigurations DisplayString
  genEquipRfuRunningVersionsConstants DisplayString
  genEquipRfuRunningVersionsScripts DisplayString
  genEquipRfuRunningVersionsFirmware DisplayString

GenEquipRfuAvailableVersionsEntry  
SEQUENCE    
  genEquipRfuAvailableVersionsRfuType RfuMajorType
  genEquipRfuAvailableVersionsDSP DisplayString
  genEquipRfuAvailableVersionsConfigurations DisplayString
  genEquipRfuAvailableVersionsConstants DisplayString
  genEquipRfuAvailableVersionsScripts DisplayString
  genEquipRfuAvailableVersionsFirmware DisplayString

GenEquipRadioStatusEntry  
SEQUENCE    
  genEquipRadioStatusRadioId RadioId
  genEquipRadioStatusMSE INTEGER
  genEquipRadioStatusDefectedBlocks INTEGER
  genEquipRadioStatusBER ThresholdExponent
  genEquipRadioStatusXPI INTEGER
  genEquipRadioStatusXPICEnabled EnableDisableSMI2

GenEquipRadioCfgEntry  
SEQUENCE    
  genEquipRadioCfgRadioId RadioId
  genEquipRadioCfgLinkId INTEGER
  genEquipRadioCfgMACHeaderCompression EnableDisable
  genEquipRadioCfgClearCounters OffOn
  genEquipRadioCfgIfLoopback INTEGER
  genEquipRadioCfgExcessiveBERThreshold ThresholdExponent
  genEquipRadioCfgSignalDegradeThreshold ThresholdExponent
  genEquipRadioCfgRadioAdmin EnableDisable
  genEquipRadioCfgRadioOperationalStatus DownUp
  genEquipRadioCfgRadioTrafficPriorityScheme INTEGER
  genEquipRadioCfgRadioHiPriorityEthernetBW INTEGER
  genEquipRadioCfgRadioMultiRadioEnable EnableDisable
  genEquipRadioCfgRadioMultiRadioBlockLocalTraffic INTEGER
  genEquipRadioCfgRadioMultiRadioBlockMateTraffic INTEGER
  genEquipRadioCfgRadioCurrentAvailableCapacity INTEGER
  genEquipRadioCfgRadioMultiRadioExcessiveBERAdmin EnableDisable
  genEquipRadioCfgRadioMultiRadioSignalDegradeAdmin EnableDisable
  genEquipRadioCfgEnAlarmGenOnRslDegrade EnableDisable
  genEquipRadioCfgAlarmGenRslNominalLevel INTEGER
  genEquipRadioCfgAlarmGenRslDegradationMargin INTEGER
  genEquipRadioCfgLinkShutDownOnRadioFailure EnableDisable
  genEquipRadioCfgLoopbackTimeout INTEGER
  genEquipRadioCfgAbcMode INTEGER

GenEquipRemoteRadioEntry  
SEQUENCE    
  genEquipRemoteRadioRadioId RadioId
  genEquipRemoteRadioRemoteCommunication DownUp
  genEquipRemoteRadioRemoteIPAddr IpAddress
  genEquipRemoteRadioRemoteRxLevel INTEGER
  genEquipRemoteRadioRemoteForceMaxTxLevel INTEGER
  genEquipRemoteRadioRemoteTxFreq INTEGER
  genEquipRemoteRadioRemoteRxFreq INTEGER
  genEquipRemoteRadioRemoteATPCReferenceRxLevel INTEGER
  genEquipRemoteRadioRemoteFloatingIPAddr IpAddress
  genEquipRemoteRadioRemoteDefaultGateway IpAddress
  genEquipRemoteRadioRemoteMostSevereAlarm Severity
  genEquipRemoteRadioRemoteSubnetMask IpAddress
  genEquipRemoteRadioRemoteSlotID INTEGER
  genEquipRemoteRadioRemoteForceTxMute OffOn
  genEquipRemoteRadioRemoteLinkId INTEGER
  genEquipRemoteRadioRemoteATPCoverrideState NoYes
  genEquipRemoteRadioRemoteATPCoverrideStateCancel NoYes
  genEquipRemoteRadioRemoteDataLoopBackAdmin EnableDisable
  genEquipRemoteRadioRemoteDataLoopBackDuration INTEGER
  genEquipRemoteRadioRemoteDataLoopBackSwitchAddress EnableDisable
  genEquipRemoteRadioRemoteGreenReferenceRxLevel INTEGER
  genEquipRemoteRadioRemoteMNGvlan INTEGER
  genEquipRemoteRadioRemoteReset FalseTrue
  genEquipRemoteRadioRemoteGreenModeAdmin EnableDisable
  genEquipRemoteRadioRemoteWebProtocol CommunicationChannel
  genEquipRemoteRadioRemoteIPv6Addr OCTET STRING
  genEquipRemoteRadioRemotePrefixLength INTEGER
  genEquipRemoteRadioRemoteDefaultGatewayIpv6 OCTET STRING
  genEquipRemoteRadioRemoteResetSlot FalseTrue

GenEquipRadioMRMCEntry  
SEQUENCE    
  genEquipRadioMRMCRadioId RadioId
  genEquipRadioMRMCSelectedScriptIndex INTEGER
  genEquipRadioMRMCOccupidBandwidth INTEGER
  genEquipRadioMRMCOperMode INTEGER
  genEquipRadioMRMCCurrTxProfile MrmcProfile
  genEquipRadioMRMCCurrTxQAM INTEGER
  genEquipRadioMRMCCurrTxBitrate MrmcBitRate
  genEquipRadioMRMCCurrTxVc INTEGER
  genEquipRadioMRMCCurrRxProfile MrmcProfile
  genEquipRadioMRMCCurrRxQAM INTEGER
  genEquipRadioMRMCCurrRxBitrate MrmcBitRate
  genEquipRadioMRMCCurrRxVc INTEGER
  genEquipRadioMRMCCurrGrade RfuGrade
  genEquipRadioMRMCEnAlarmOnAcmProfileDegrade EnableDisable
  genEquipRadioMRMCAlarmOnAcmProfileDegradeThreshold INTEGER

GenEquipRadioMRMCScriptEntry  
SEQUENCE    
  genEquipRadioMRMCScriptRadioId RadioId
  genEquipRadioMRMCScriptIndex INTEGER
  genEquipRadioMRMCScriptName DisplayString
  genEquipRadioMRMCScriptOperMode INTEGER
  genEquipRadioMRMCScriptProfile MrmcProfile
  genEquipRadioMRMCScriptProfileBitrate MrmcBitRate
  genEquipRadioMRMCScriptAdaptivePower INTEGER
  genEquipRadioMRMCScriptReference INTEGER
  genEquipRadioMRMCScriptMinProfile MrmcProfile

GenEquipRadioMRMCFilteredEntry  
SEQUENCE    
  genEquipRadioMRMCFilteredRadioId RadioId
  genEquipRadioMRMCFilteredScriptId MrmcScriptId

GenEquipRadioMRMCProfileAttrEntry  
SEQUENCE    
  genEquipRadioMRMCProfileAttrScriptId MrmcScriptId
  genEquipRadioMRMCProfileAttrTxProfile MrmcProfile
  genEquipRadioMRMCProfileAttrRxProfile MrmcProfile
  genEquipRadioMRMCProfileAttrTxQAM QamOrder
  genEquipRadioMRMCProfileAttrTxBitRate MrmcBitRate
  genEquipRadioMRMCProfileAttrRxQAM QamOrder
  genEquipRadioMRMCProfileAttrRxBitRate MrmcBitRate

GenEquipRadioMRMCScriptAttrEntry  
SEQUENCE    
  genEquipRadioMRMCScriptAttrScriptId MrmcScriptId
  genEquipRadioMRMCScriptAttrScriptName DisplayString
  genEquipRadioMRMCScriptAttrSupportACM NoYes
  genEquipRadioMRMCScriptAttrStandard INTEGER
  genEquipRadioMRMCScriptAttrMultiCarrier INTEGER
  genEquipRadioMRMCScriptAttrAdjChannel NoYes
  genEquipRadioMRMCScriptAttrModScheme INTEGER
  genEquipRadioMRMCScriptAttrSymmetry INTEGER
  genEquipRadioMRMCScriptAttrLatency INTEGER
  genEquipRadioMRMCScriptAttrTxBW INTEGER
  genEquipRadioMRMCScriptAttrRxBW INTEGER
  genEquipRadioMRMCScriptAttrTxOccupiedBW INTEGER
  genEquipRadioMRMCScriptAttrRxOccupiedBW INTEGER
  genEquipRadioMRMCScriptAttrLinkGrade RfuGrade
  genEquipRadioMRMCScriptAttrDiffGrade RfuGrade
  genEquipRadioMRMCScriptAttrChannelBW INTEGER
  genEquipRadioMRMCScriptAttrTxMaxProfile MrmcProfile
  genEquipRadioMRMCScriptAttrRxMaxProfile MrmcProfile

GenEquipRadioMRMCConfigEntry  
SEQUENCE    
  genEquipRadioMRMCConfigRadioId RadioId
  genEquipRadioMRMCConfigActiveScriptId MrmcScriptId
  genEquipRadioMRMCConfigStandbyScriptId MrmcScriptId
  genEquipRadioMRMCConfigOperMode INTEGER
  genEquipRadioMRMCConfigMaxProfile MrmcProfile
  genEquipRadioMRMCConfigMinProfile MrmcProfile
  genEquipRadioMRMCConfigAdaptivePowerAdmin EnableDisable
  genEquipRadioMRMCConfigAdaptivePowerRefClass INTEGER

GenEquipRadioCompCfgEntry  
SEQUENCE    
  genEquipRadioCompMode INTEGER
  genEquipRadioEnhHeaderCompAdmin AllowedNotAllowed
  genEquipRadioEnhDataCompAdmin EnableDisable
  genEquipRadioEnhHeaderCompMode INTEGER

GenEquipRadioCompStatusEntry  
SEQUENCE    
  genEquipRadioCompOperationalState INTEGER

GenEquipRadioCompExclRulesEntry  
SEQUENCE    
  genEquipRadioCompExclRuleId INTEGER
  genEquipRadioCompExclRuleType INTEGER
  genEquipRadioCompExclRuleName DisplayString
  genEquipRadioCompExclRuleValue OCTET STRING
  genEquipRadioCompExclRuleRowStatus INTEGER

GenEquipRadioCompNGCfgEntry  
SEQUENCE    
  genEquipRadioCompNGCfgifIndex INTEGER
  genEquipRadioHeaderCompNGCfgClearStats NoYes
  genEquipRadioHeaderCompNGCfgUserFlowType INTEGER
  genEquipRadioHeaderCompNGCfgMode INTEGER
  genEquipRadioCutThroughNGCfgMode NoYes

GenEquipRadioCompNGExclRulesEntry  
SEQUENCE    
  genEquipRadioCompNGExclRulesifIndex INTEGER
  genEquipRadioCompNGExclRuleId INTEGER
  genEquipRadioCompNGExclRuleName DisplayString
  genEquipRadioCompNGExclRuleType EnhancedHCExclRuleType
  genEquipRadioCompNGExclRuleValue OCTET STRING

GenEquipRadioCutThroughNGCountersEntry  
SEQUENCE    
  genEquipRadioCutThroughNGCountersifIndex INTEGER
  genEquipRadioCutThroughNGCountersRxFrames Counter64
  genEquipRadioCutThroughNGCountersRxBytes Counter64
  genEquipRadioCutThroughNGCountersTxFrames Counter64
  genEquipRadioCutThroughNGCountersTxBytes Counter64
  genEquipRadioCutThroughNGCountersTotalRxFrames Counter64
  genEquipRadioCutThroughNGCountersTotalRxBytes Counter64
  genEquipRadioCutThroughNGCountersTotalTxBytesOut Counter64
  genEquipRadioCutThroughNGCountersTotalTxFrames Counter64
  genEquipRadioCutThroughNGCountersTotalTxIdleBytes Counter64
  genEquipRadioCutThroughNGCountersTotalTxBytesIn Counter64

GenEquipRadioCompNGStatusEntry  
SEQUENCE    
  genEquipRadioCompNGStatusifindex INTEGER
  genEquipRadioCompNGStatusOperationalState HcModeType
  genEquipRadioCompNGStatusType HcType

GenEquipRadioCompNGCountersEntry  
SEQUENCE    
  genEquipRadioCompNGCountersifIndex INTEGER
  genEquipRadioCompNGCountersHCInBytes Counter64
  genEquipRadioCompNGCountersHCOutBytes Counter64
  genEquipRadioCompNGCountersHCCompFrm Counter64
  genEquipRadioCompNGCountersHCFrmUncmpExclRule Counter64
  genEquipRadioCompNGCountersHCFrmUcompInternal Counter64
  genEquipRadioCompNGCountersHCLearningFrm Counter64
  genEquipRadioCompNGCountersHCUserFlowTypeActiveFlows Counter64
  genEquipRadioCompNGCountersHCTotalActiveFlows Counter64

GenEquipRadioPtpTransportCfgEntry  
SEQUENCE    
  genEquipRadioPtpTransportChannelAdmin EnableDisable
  genEquipRadioPtpTransportChannelMode INTEGER

GenEquipRadioPtpTransportCountersEntry  
SEQUENCE    
  genEquipRadioPtpTransportTxFrames INTEGER
  genEquipRadioPtpTransportTxDroppedFrames INTEGER
  genEquipRadioPtpTransportTxBytes INTEGER
  genEquipRadioPtpTransportTxDroppedBytes INTEGER
  genEquipRadioPtpTransportRxFrames INTEGER
  genEquipRadioPtpTransportRxBytes INTEGER

GenEquipRadioCutThroughCfgEntry  
SEQUENCE    
  genEquipRadioCutThroughChannelAdmin EnableDisable

GenEquipRadioCutThroughCountersEntry  
SEQUENCE    
  genEquipRadioCutThroughTxFrames INTEGER
  genEquipRadioCutThroughTxBytes INTEGER
  genEquipRadioCutThroughRxFrames INTEGER
  genEquipRadioCutThroughRxBytes INTEGER

GenEquipRadioGroupsProtectionAttrEntry  
SEQUENCE    
  genEquipRadioGroupsProtectionAttrGroupIfIndex INTEGER
  genEquipRadioGroupsProtectionAttrGroupId INTEGER
  genEquipRadioGroupsProtectionAttrCommand RadioProtectionCmd
  genEquipRadioGroupsProtectionAttrCopyToMate OffOn
  genEquipRadioGroupsProtectionAttrCopyToMateSourceIfIndex INTEGER
  genEquipRadioGroupsProtectionAttrRevertiveAdmin EnableDisable
  genEquipRadioGroupsProtectionAttrRevertivePrimaryIfIndex INTEGER

GenEquipRadioGroupsProtectionMembersEntry  
SEQUENCE    
  genEquipRadioGroupsProtectionMembersIfIndexGroup INTEGER
  genEquipRadioGroupsProtectionMembersGroupId INTEGER
  genEquipRadioGroupsProtectionMembersMem1IfIndex INTEGER
  genEquipRadioGroupsProtectionMembersMem2IfIndex INTEGER
  genEquipRadioGroupsProtectionMembersRowStatus RowStatus

GenEquipRadioGroupsProtectionStatusEntry  
SEQUENCE    
  genEquipRadioGroupsProtectionStatusGroupIfIndex INTEGER
  genEquipRadioGroupsProtectionStatusActiveIfIndex INTEGER
  genEquipRadioGroupsProtectionStatusStandbyIfIndex INTEGER
  genEquipRadioGroupsProtectionStatusLockout NoYes

GenEquipRadioGroupsProtectionBBSSDAttrEntry  
SEQUENCE    
  genEquipRadioGroupsProtectionBBSSDAttrGroupIfIndex INTEGER
  genEquipRadioGroupsProtectionBBSSDAttrRevertive EnableDisable
  genEquipRadioGroupsProtectionBBSSDAttrClrSwCnt OffOn
  genEquipRadioGroupsProtectionBBSSDAttrFWAuto EnableDisable

GenEquipRadioGroupsProtectionBBSSDStatusEntry  
SEQUENCE    
  genEquipRadioGroupsProtectionBBSSDStatusGroupIfIndex INTEGER
  genEquipRadioGroupsProtectionBBSSDStatusAbcGroupIfIndex INTEGER
  genEquipRadioGroupsProtectionBBSSDStatusActiveRxQuality INTEGER
  genEquipRadioGroupsProtectionBBSSDStatusActiveRxRadioIfIndex INTEGER
  genEquipRadioGroupsProtectionBBSSDStatusActiveTxRadioIfIndex INTEGER
  genEquipRadioGroupsProtectionBBSSDStatusLockout NoYes
  genEquipRadioGroupsProtectionBBSSDStatusRxChId INTEGER
  genEquipRadioGroupsProtectionBBSSDStatusStdbyRxQuality INTEGER
  genEquipRadioGroupsProtectionBBSSDStatusStdbyRxRadioIfIndex INTEGER
  genEquipRadioGroupsProtectionBBSSDStatusStandbyTxRadioIfIndex INTEGER

GenEquipRadioGroupsXPICAttrEntry  
SEQUENCE    
  genEquipRadioGroupsXPICAttrGroupIfIndex INTEGER
  genEquipRadioGroupsXPICAttrCopyToMateSourceIfIndex INTEGER
  genEquipRadioGroupsXPICAttrGroupId INTEGER
  genEquipRadioGroupsXPICAttrXRSMAdmin EnableDisable
  genEquipRadioGroupsXPICAttrAdmin EnableDisable
  genEquipRadioGroupsXPICAttrCopyToMate Copy2mate

GenEquipRadioGroupsXPICMembersEntry  
SEQUENCE    
  genEquipRadioGroupsXPICMembersIfIndexGroup INTEGER
  genEquipRadioGroupsXPICMembersMem1IfIndex INTEGER
  genEquipRadioGroupsXPICMembersMem2IfIndex INTEGER
  genEquipRadioGroupsXPICMembersRowStatus RowStatus

GenEquipRadioGroupsXPICStatusEntry  
SEQUENCE    
  genEquipRadioGroupsXPICStatusGroupIfIndex INTEGER
  genEquipRadioGroupsXPICStatusState XpicState

GenEquipRadioGroupsMRAttrEntry  
SEQUENCE    
  genEquipRadioGroupsMRAttrGroupIfIndex INTEGER
  genEquipRadioGroupsMRAttrGroupId INTEGER
  genEquipRadioGroupsMRAttrAdmin EnableDisable
  genEquipRadioGroupsMRAttrBlockRadioIfindex INTEGER
  genEquipRadioGroupsMRAttrBlockRadioAdmin EnableDisable
  genEquipRadioGroupsMRAttrCopy2MateIfindex INTEGER
  genEquipRadioGroupsMRAttrCopy2MateAdmin EnableDisable
  genEquipRadioGroupsMRAttrExBerAdmin EnableDisable
  genEquipRadioGroupsMRAttrMinNumRadio INTEGER
  genEquipRadioGroupsMRAttrMinProfileAdmin EnableDisable
  genEquipRadioGroupsMRAttrSigDegardeAdmin EnableDisable

GenEquipRadioGroupsMRMembersEntry  
SEQUENCE    
  genEquipRadioGroupsMRMembersIfIndexGroup INTEGER
  genEquipRadioGroupsMRMembersMem1IfIndex INTEGER
  genEquipRadioGroupsMRMembersMem2IfIndex INTEGER
  genEquipRadioGroupsMRMembersRowStatus RowStatus

GenEquipRadioGroupsMRStatusEntry  
SEQUENCE    
  genEquipRadioGroupsMRStatusGroupIfIndex INTEGER
  genEquipRadioGroupsMRStatusOpertionalState INTEGER
  genEquipRadioGroupsMRStatusRemoteOpertionalState INTEGER

GenEquipRadioGroupsMIMOAttrEntry  
SEQUENCE    
  genEquipRadioGroupsMIMOAttrGroupIfIndex INTEGER
  genEquipRadioGroupsMIMOAttrRole INTEGER
  genEquipRadioGroupsMIMOAttrAdmin EnableDisable
  genEquipRadioGroupsMIMOAttrResetStateMachine OffOn

GenEquipRadioGroupsMIMOMembersEntry  
SEQUENCE    
  genEquipRadioGroupsMIMOMembersGroupIfIndex INTEGER
  genEquipRadioGroupsMIMOMembersGroupType INTEGER
  genEquipRadioGroupsMIMOMembersMem1IfIndex INTEGER
  genEquipRadioGroupsMIMOMembersMem2IfIndex INTEGER
  genEquipRadioGroupsMIMOMembersMem3IfIndex INTEGER
  genEquipRadioGroupsMIMOMembersMem4IfIndex INTEGER
  genEquipRadioGroupsMIMOMembersRowStatus RowStatus

GenEquipRadioGroupsMIMOStatusEntry  
SEQUENCE    
  genEquipRadioGroupsMIMOStatusGroupIfIndex INTEGER
  genEquipRadioGroupsMIMOStatusState INTEGER
  genEquipRadioGroupsMIMOStatus1stMMI INTEGER
  genEquipRadioGroupsMIMOStatus2ndMMI INTEGER
  genEquipRadioGroupsMIMOStatus3rdMMI INTEGER
  genEquipRadioGroupsMIMOStatus4thMMI INTEGER
  genEquipRadioGroupsMIMOStatusAdvancedState INTEGER

GenEquipRadioGroupsAbcAttrEntry  
SEQUENCE    
  genEquipRadioGroupsAbcAttrIfIndex INTEGER
  genEquipRadioGroupsAbcAttrGroupName DisplayString
  genEquipRadioGroupsAbcAttrAdminState EnableDisable
  genEquipRadioGroupsAbcAttrQnumberOfRadioMembers INTEGER
  genEquipRadioGroupsAbcAttrProtectionEnable EnableDisable
  genEquipRadioGroupsAbcAttrHighPriEthernetBandwidth INTEGER
  genEquipRadioGroupsAbcAttrQualityThreshold INTEGER
  genEquipRadioGroupsAbcAttrRowStatus RowStatus

GenEquipRadioGroupsAbcMembersEntry  
SEQUENCE    
  genEquipRadioGroupsAbcMembersGroupIfIndex INTEGER
  genEquipRadioGroupsAbcMembersGroupId INTEGER
  genEquipRadioGroupsAbcMembersChannel1MemberIfIndex INTEGER
  genEquipRadioGroupsAbcMembersChannel1adminState EnableDisable
  genEquipRadioGroupsAbcMembersChannel2MemberIfIndex INTEGER
  genEquipRadioGroupsAbcMembersChannel2adminState EnableDisable
  genEquipRadioGroupsAbcMembersChannel3MemberIfIndex INTEGER
  genEquipRadioGroupsAbcMembersChannel3adminState EnableDisable
  genEquipRadioGroupsAbcMembersChannel4MemberIfIndex INTEGER
  genEquipRadioGroupsAbcMembersChannel4adminState EnableDisable
  genEquipRadioGroupsAbcMembersChannel5MemberIfIndex INTEGER
  genEquipRadioGroupsAbcMembersChannel5adminState EnableDisable
  genEquipRadioGroupsAbcMembersChannel6MemberIfIndex INTEGER
  genEquipRadioGroupsAbcMembersChannel6adminState EnableDisable
  genEquipRadioGroupsAbcMembersChannel7MemberIfIndex INTEGER
  genEquipRadioGroupsAbcMembersChannel7adminState EnableDisable
  genEquipRadioGroupsAbcMembersChannel8MemberIfIndex INTEGER
  genEquipRadioGroupsAbcMembersChannel8adminState EnableDisable

GenEquipRadioGroupsAbcStatusEntry  
SEQUENCE    
  genEquipRadioGroupsAbcStatusIfIndex INTEGER
  genEquipRadioGroupsAbcStatusOperState DownUp
  genEquipRadioGroupsAbcStatusRemoteOperState DownUp
  genEquipRadioGroupsAbcStatusCurrentAggregatedCapacityRX INTEGER
  genEquipRadioGroupsAbcStatusCurrentAggregatedCapacityTX INTEGER
  genEquipRadioGroupsAbcStatusChannel1Operstate DownUp
  genEquipRadioGroupsAbcStatusChannel1Capacity INTEGER
  genEquipRadioGroupsAbcStatusChannel2Operstate DownUp
  genEquipRadioGroupsAbcStatusChannel2Capacity INTEGER
  genEquipRadioGroupsAbcStatusChannel3OperState DownUp
  genEquipRadioGroupsAbcStatusChannel3Capacity INTEGER
  genEquipRadioGroupsAbcStatusChannel4OperState DownUp
  genEquipRadioGroupsAbcStatusChannel4Capacity INTEGER
  genEquipRadioGroupsAbcStatusChannel5OperState DownUp
  genEquipRadioGroupsAbcStatusChannel5Capacity INTEGER
  genEquipRadioGroupsAbcStatusChannel6OperState DownUp
  genEquipRadioGroupsAbcStatusChannel6Capacity INTEGER
  genEquipRadioGroupsAbcStatusChannel7OperState DownUp
  genEquipRadioGroupsAbcStatusChannel7Capacity INTEGER
  genEquipRadioGroupsAbcStatusChannel8OperState DownUp
  genEquipRadioGroupsAbcStatusChannel8Capacity INTEGER

GenEquipStm1AbcAttrEntry  
SEQUENCE    
  genEquipStm1AbcAttrIfIndex INTEGER
  genEquipStm1AbcAttrGroupId INTEGER
  genEquipStm1AbcAttrNumberOfMembers INTEGER
  genEquipStm1AbcAttrPri1IfIndex INTEGER
  genEquipStm1AbcAttrPri2IfIndex INTEGER
  genEquipStm1AbcAttrPri3IfIndex INTEGER
  genEquipStm1AbcAttrPri4IfIndex INTEGER

Defined Values

microwave-radio 1.3.6.1.4.1.2281
OBJECT IDENTIFIER    

genEquip 1.3.6.1.4.1.2281.10
OBJECT IDENTIFIER    

genEquipUnit 1.3.6.1.4.1.2281.10.1
OBJECT IDENTIFIER    

genEquipRFU 1.3.6.1.4.1.2281.10.5
OBJECT IDENTIFIER    

genEquipRfuStatusTable 1.3.6.1.4.1.2281.10.5.1
This table indicates the RFU Status Data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRfuStatusEntry

genEquipRfuStatusEntry 1.3.6.1.4.1.2281.10.5.1.1
Entry containing the data of the RFU.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRfuStatusEntry  

genEquipRfuStatusId 1.3.6.1.4.1.2281.10.5.1.1.1
This value indicates an index of a specific RFU
Status: mandatory Access: read-only
OBJECT-TYPE    
  RfuId  

genEquipRfuStatusRxLevel 1.3.6.1.4.1.2281.10.5.1.1.2
This value indicates the RFU Receive Level Status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -199..0  

genEquipRfuStatusTxLevel 1.3.6.1.4.1.2281.10.5.1.1.3
This value indicates the RFU Transmit Level Status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -99..34  

genEquipRfuStatusTemperature 1.3.6.1.4.1.2281.10.5.1.1.4
This value indicates the RFU temperature. The value depends on the represented measurement system. with genEquipUnitMeasurementSystem parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuStatusRunningVersion 1.3.6.1.4.1.2281.10.5.1.1.5
This value indicates the running SW version on the RFU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuStatusRFUType 1.3.6.1.4.1.2281.10.5.1.1.6
The different types of the supported RFUs
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(2), rfu-1500p(3), rfu-1500hp(5), rfu-1500sp(6), rfu-c(7), rfu-h(8), rfu-c(9), rfu-h(10), rfu-1500sp(11), rfu-hp(12), rfu-a(13), rfu-d(14), rfu-1500p(32), rfu-1500hp(34), rfu-1500sp(35), rfu-c(36), rfu-h(37), rfu-c(38), rfu-h(39), rfu-1500sp(40), rfu-hp(41), rfu-a(42), rfu-d(43)  

genEquipRfuStatusRFUGrade 1.3.6.1.4.1.2281.10.5.1.1.7
The grade of the RFU
Status: mandatory Access: read-only
OBJECT-TYPE    
  RfuGrade  

genEquipRfuStatusTxRxFreqSeparation 1.3.6.1.4.1.2281.10.5.1.1.8
Tx to Rx frequency separation (MHz), For some RFUs the user cannot set the Tx and Rx frequencies separately (one of them affects the other one's value).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuStatusRFUMode 1.3.6.1.4.1.2281.10.5.1.1.9
IF combining parameter - The mode of the RFU
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER main(2), diversity(3), combined(4)  

genEquipRfuStatusRxLevelDiversity 1.3.6.1.4.1.2281.10.5.1.1.10
IF combining parameter - The Rx Diversity level (dBm)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -199..0  

genEquipRfuStatusRxLevelCombined 1.3.6.1.4.1.2281.10.5.1.1.11
IF combining parameter - The Rx Combined level (dBm)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -199..0  

genEquipRfuStatusAutoDelayCalStatus 1.3.6.1.4.1.2281.10.5.1.1.12
IF combining parameter - the automatic delay calibration status. Supported only for specific RFUs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-action(2), pass(3), error(4)  

genEquipRfuStatusRFUSerialNumber 1.3.6.1.4.1.2281.10.5.1.1.13
RFU Serial number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuStatusRFUPartNumber 1.3.6.1.4.1.2281.10.5.1.1.14
RFU Part number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuStatusRFUmateCarrier 1.3.6.1.4.1.2281.10.5.1.1.15
The returned value indicates the slot number of the 'copartner RFU-D carrier'. The returned value will be '-1' when the RFU is not RFU-D, or if the 'copartner RFU-D' carrier is not found.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuStatusRFUMaxTxFreq 1.3.6.1.4.1.2281.10.5.1.1.16
The maximum Tx frequency of the RFU that is allowed by the RFU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuStatusRFUMinTxFreq 1.3.6.1.4.1.2281.10.5.1.1.17
The minimum Tx frequency of the RFU that is allowed by the RFU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuStatusRFUMaxRxFreq 1.3.6.1.4.1.2281.10.5.1.1.18
The maximum Rx frequency of the RFU that is allowed by the RFU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuStatusRFUMinRxFreq 1.3.6.1.4.1.2281.10.5.1.1.19
The minimum Rx frequency of the RFU that is allowed by the RFU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuStatusInstallation 1.3.6.1.4.1.2281.10.5.1.1.20
Returns 'all-indoor' or 'split' according to the RFU installation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER split-mount(0), all-indoor(1)  

genEquipRfuStatusDataSciErrors 1.3.6.1.4.1.2281.10.5.1.1.21
Data Sci Errors
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuStatusDeviceError 1.3.6.1.4.1.2281.10.5.1.1.22
Status Device Error
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuStatusBand 1.3.6.1.4.1.2281.10.5.1.1.23
The Band of the RF-Module in GHz
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), band-18(2), band-23(3), band-26(4), band-28(5), band-38(6), band-29(7), band-31(8), band-15(9), band-13(10), band-10dot5-11(11), band-7-8(12), band-6L-6H(13), band-32(14)  

genEquipRfuStatusPATemp 1.3.6.1.4.1.2281.10.5.1.1.24
The measured temperature in celsius of the PA (Power Amplifier) of the RF module
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuStatusTxMute 1.3.6.1.4.1.2281.10.5.1.1.25
The mute status, whether it is on (mute) or off (un-mute) of the RF-Module
Status: mandatory Access: read-only
OBJECT-TYPE    
  OffOn  

genEquipRfuStatusMinTxLevel 1.3.6.1.4.1.2281.10.5.1.1.26
The minimum feasible TX signal level (TSL) in dBm of the RF-Module
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuStatusMaxTxLevel 1.3.6.1.4.1.2281.10.5.1.1.27
The maximum feasible TX signal level (TSL) in dBm of the RF-Module
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuStatusMinBW 1.3.6.1.4.1.2281.10.5.1.1.28
The minimum supported bandwidth in KHz of the RF-Module
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuStatusMaxBW 1.3.6.1.4.1.2281.10.5.1.1.29
The maximum supported bandwidth in KHz of the RF-Module
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuStatusCommunication 1.3.6.1.4.1.2281.10.5.1.1.30
The communication status between the host and the RFU
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipRfuCfgATPCOverrideTimerState 1.3.6.1.4.1.2281.10.5.1.1.31
Returns the state of the ATPC 'override timer', whether it is regular or expired
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), expired(1)  

genEquipRfuStatusIfCombSupport 1.3.6.1.4.1.2281.10.5.1.1.32
Indicates if the IF-Combiner function is supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  SupportedNotsupported  

genEquipRfuStatusMinRxLevel 1.3.6.1.4.1.2281.10.5.1.1.33
The minimum feasible RX signal level (RSL) in dBm of the RF-Module
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuStatusMaxRxLevel 1.3.6.1.4.1.2281.10.5.1.1.34
The maximum feasible RX signal level (RSL) in dBm of the RF-Module
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuCfgTable 1.3.6.1.4.1.2281.10.5.2
This table indicates the RFU Configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRfuCfgEntry

genEquipRfuCfgEntry 1.3.6.1.4.1.2281.10.5.2.1
This table indicates the RFU Configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRfuCfgEntry  

genEquipRfuCfgId 1.3.6.1.4.1.2281.10.5.2.1.1
This value indicates an index of a specific RFU
Status: mandatory Access: read-only
OBJECT-TYPE    
  RfuId  

genEquipRfuCfgMaxTxLevel 1.3.6.1.4.1.2281.10.5.2.1.2
This value indicates the RFU Maximum Transmit Level Configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -50..34  

genEquipRfuCfgTxFreq 1.3.6.1.4.1.2281.10.5.2.1.3
Tx Frequency configuration (Mhz)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRfuCfgRxFreq 1.3.6.1.4.1.2281.10.5.2.1.4
Rx Frequency configuration (Mhz)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRfuCfgATPCAdmin 1.3.6.1.4.1.2281.10.5.2.1.5
ATPC configuration - Admin mode Possible values: - enable(2) - disable(3)
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRfuCfgATPCRefRSL 1.3.6.1.4.1.2281.10.5.2.1.6
ATPC configuration - reference RSL level (dBm)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -70..-30  

genEquipRfuCfgMuteTx 1.3.6.1.4.1.2281.10.5.2.1.7
The required TX mute status of the RF-Module
Status: mandatory Access: read-write
OBJECT-TYPE    
  MuteOnOff  

genEquipRfuCfgRSLConnSrc 1.3.6.1.4.1.2281.10.5.2.1.8
IF combining - RFU RSL (Received Signal Level) connector source
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER main(2), diversity(3)  

genEquipRfuCfgDelayCal 1.3.6.1.4.1.2281.10.5.2.1.9
IF combining - Delay calibration
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -130..130  

genEquipRfuCfgLoopback 1.3.6.1.4.1.2281.10.5.2.1.10
RFU RF loopback command
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), towardsSystem(1)  

genEquipRfuCfgLogAdmin 1.3.6.1.4.1.2281.10.5.2.1.11
RFU internal log file admin Possible values: - enable(2) - disable(3)
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRfuCfgClearComDeviceError 1.3.6.1.4.1.2281.10.5.2.1.12
Clear Com device Error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipRfuCfgGreenModeAdmin 1.3.6.1.4.1.2281.10.5.2.1.13
Enables/disables RFU green mode. This mode will minimize power consumption while ensuring the highest transmission power possible to get an RSL not higher than defined in the reference level genEquipRfuCfgGreenModeReferenceLevel
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRfuCfgGreenModeReferenceLevel 1.3.6.1.4.1.2281.10.5.2.1.14
RSL reference level (in dB) for green mode operation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -70..-30  

genEquipRfuCfgATPCOverrideTxLevel 1.3.6.1.4.1.2281.10.5.2.1.15
This parameter configures the default transmission signal level in case of ATPC override due to expiration of maximum power timer as defined in genEquipRfuCfgATPCOverrideTimeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -50..34  

genEquipRfuCfgATPCOverrideTimeout 1.3.6.1.4.1.2281.10.5.2.1.16
This parameter configures the timer to be counted while in ATPC in case of maximum power transmission. If this timer expires, the system will transmit at a default level defined in genEquipRfuCfgATPCOverrideTxLevel
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..600  

genEquipRfuCfgATPCOverrideTimerCounter 1.3.6.1.4.1.2281.10.5.2.1.17
This parameter shows the time left in the timer defined by genEquipRfuCfgATPCOverrideTxLevel
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..600  

genEquipRfuCfgATPCOverrideTimerCancel 1.3.6.1.4.1.2281.10.5.2.1.18
Setting this parameter to ON will cancel the ATPC override mode. This will only be effective while in this mode i.e. the system had been transmitting at maximum power for a time longer than defined in genEquipRfuCfgATPCOverrideTxLevel and now is transmitting at the default level defined in genEquipRfuCfgATPCOverrideTxLevel. Following execution, the system will go back to normal ATPC operating mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipRfuUploadTable 1.3.6.1.4.1.2281.10.5.3
RFU Upload Data table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRfuUploadEntry

genEquipRfuUploadEntry 1.3.6.1.4.1.2281.10.5.3.1
Entry containing the data of the RFU.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRfuUploadEntry  

genEquipRfuUploadId 1.3.6.1.4.1.2281.10.5.3.1.1
This value indicates an index of a specific RFU
Status: mandatory Access: read-only
OBJECT-TYPE    
  RadioId  

genEquipRfuUploadSwCommand 1.3.6.1.4.1.2281.10.5.3.1.2
This value initiates SW upload to the RFU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER uploadSW(1), noOperation(2)  

genEquipRfuUploadSwStatus 1.3.6.1.4.1.2281.10.5.3.1.3
This value indicates the status of the SW load operation on the RFU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noLoad(0), loadError(1), loadStart(2), loadSendBlock(3), loadDone(5)  

genEquipRfuUploadCounter 1.3.6.1.4.1.2281.10.5.3.1.4
This parameter shows the progress (in blocks) of RFU software download
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRFUNG 1.3.6.1.4.1.2281.10.5.4
OBJECT IDENTIFIER    

genEquipRfuSwInstallTable 1.3.6.1.4.1.2281.10.5.4.2
RFU software managemet install configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRfuSwInstallEntry

genEquipRfuSwInstallEntry 1.3.6.1.4.1.2281.10.5.4.2.1
RFU software managemet install configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRfuSwInstallEntry  

genEquipRfuSwInstallIfIndex 1.3.6.1.4.1.2281.10.5.4.2.1.1
RFU ifIndex
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuSwInstallOperation 1.3.6.1.4.1.2281.10.5.4.2.1.2
RFU software installation operation to be performed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no-operation(0), update-version-from-bundle(1), install-existing-version(2), abort-timer(3)  

genEquipRfuSwInstallTimedInstallation 1.3.6.1.4.1.2281.10.5.4.2.1.3
Determines whether the installation will be carried out after a configured timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NoYes  

genEquipRfuSwInstallTimer 1.3.6.1.4.1.2281.10.5.4.2.1.4
Timer for timed installations
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRfuInstalledVersionsTable 1.3.6.1.4.1.2281.10.5.4.3
RFU software managemet installed versuion.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRfuInstalledVersionsEntry

genEquipRfuInstalledVersionsEntry 1.3.6.1.4.1.2281.10.5.4.3.1
RFU software managemet installed version.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRfuInstalledVersionsEntry  

genEquipRfuInstalledVersionsIfIndex 1.3.6.1.4.1.2281.10.5.4.3.1.1
RFU ifIndex
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuInstalledVersionsDSP 1.3.6.1.4.1.2281.10.5.4.3.1.2
RFU version DSP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuInstalledVersionsConfigurations 1.3.6.1.4.1.2281.10.5.4.3.1.3
Configuration tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuInstalledVersionsConstants 1.3.6.1.4.1.2281.10.5.4.3.1.4
Constant tables
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuInstalledVersionsScripts 1.3.6.1.4.1.2281.10.5.4.3.1.5
RFU scripts
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuInstalledVersionsFirmware 1.3.6.1.4.1.2281.10.5.4.3.1.6
Firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuSwStatusTable 1.3.6.1.4.1.2281.10.5.4.4
RFU software managemet installed status.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRfuSwStatusEntry

genEquipRfuSwStatusEntry 1.3.6.1.4.1.2281.10.5.4.4.1
RFU software managemet installed status.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRfuSwStatusEntry  

genEquipRfuSwStatusIfIndex 1.3.6.1.4.1.2281.10.5.4.4.1.1
RFU ifIndex
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuSwStatusCurrentState 1.3.6.1.4.1.2281.10.5.4.4.1.2
Current state of the install operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RFUSoftwareInstallStat  

genEquipRfuSwStatusProgress 1.3.6.1.4.1.2281.10.5.4.4.1.3
Progress of the current install operation in percentage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuRunningVersionsTable 1.3.6.1.4.1.2281.10.5.4.5
RFU software managemet rinning versions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRfuRunningVersionsEntry

genEquipRfuRunningVersionsEntry 1.3.6.1.4.1.2281.10.5.4.5.1
RFU software managemet running versions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRfuRunningVersionsEntry  

genEquipRfuRunningVersionsIfIndex 1.3.6.1.4.1.2281.10.5.4.5.1.1
RFU ifIndex
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRfuRunningVersionsDSP 1.3.6.1.4.1.2281.10.5.4.5.1.2
DSP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuRunningVersionsConfigurations 1.3.6.1.4.1.2281.10.5.4.5.1.3
Configuration tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuRunningVersionsConstants 1.3.6.1.4.1.2281.10.5.4.5.1.4
Constant tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuRunningVersionsScripts 1.3.6.1.4.1.2281.10.5.4.5.1.5
RFU scripts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuRunningVersionsFirmware 1.3.6.1.4.1.2281.10.5.4.5.1.6
Firmware.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuAvailableVersionsTable 1.3.6.1.4.1.2281.10.5.4.6
RFU software managemet available versions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRfuAvailableVersionsEntry

genEquipRfuAvailableVersionsEntry 1.3.6.1.4.1.2281.10.5.4.6.1
RFU software managemet available versions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRfuAvailableVersionsEntry  

genEquipRfuAvailableVersionsRfuType 1.3.6.1.4.1.2281.10.5.4.6.1.1
RFU Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  RfuMajorType  

genEquipRfuAvailableVersionsDSP 1.3.6.1.4.1.2281.10.5.4.6.1.2
DSP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuAvailableVersionsConfigurations 1.3.6.1.4.1.2281.10.5.4.6.1.3
Configuration tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuAvailableVersionsConstants 1.3.6.1.4.1.2281.10.5.4.6.1.4
Constant tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuAvailableVersionsScripts 1.3.6.1.4.1.2281.10.5.4.6.1.5
RFU scripts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRfuAvailableVersionsFirmware 1.3.6.1.4.1.2281.10.5.4.6.1.6
Firmware.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRadio 1.3.6.1.4.1.2281.10.7
OBJECT IDENTIFIER    

genEquipRadioStatusTable 1.3.6.1.4.1.2281.10.7.1
Radio status table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioStatusEntry

genEquipRadioStatusEntry 1.3.6.1.4.1.2281.10.7.1.1
Radio status table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioStatusEntry  

genEquipRadioStatusRadioId 1.3.6.1.4.1.2281.10.7.1.1.1
This value is the radio ID that serves as the table Index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RadioId  

genEquipRadioStatusMSE 1.3.6.1.4.1.2281.10.7.1.1.2
MSE (Mean Square Error) of the Rx signal (measured in dB * 100). -9900 value (-99.00 dB) means that the signal is not locked. ~ -3500 value (-35.00 dB) is a good MSE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioStatusDefectedBlocks 1.3.6.1.4.1.2281.10.7.1.1.3
The number of counted defective radio blocks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioStatusBER 1.3.6.1.4.1.2281.10.7.1.1.4
The measured BER (Bit Error Rate) level of the modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ThresholdExponent  

genEquipRadioStatusXPI 1.3.6.1.4.1.2281.10.7.1.1.5
XPI (Cross Polar Interference) level measured by the modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioStatusXPICEnabled 1.3.6.1.4.1.2281.10.7.1.1.6
This parameter indicates whether an XPIC script is currently loaded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipRadioCfgTable 1.3.6.1.4.1.2281.10.7.2
Radio Configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioCfgEntry

genEquipRadioCfgEntry 1.3.6.1.4.1.2281.10.7.2.1
Radio Configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioCfgEntry  

genEquipRadioCfgRadioId 1.3.6.1.4.1.2281.10.7.2.1.1
This value is the radio ID that serves as this table Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  RadioId  

genEquipRadioCfgLinkId 1.3.6.1.4.1.2281.10.7.2.1.2
Radio configuration link ID
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

genEquipRadioCfgMACHeaderCompression 1.3.6.1.4.1.2281.10.7.2.1.3
The Admin state of the MAC header compression.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioCfgClearCounters 1.3.6.1.4.1.2281.10.7.2.1.4
Setting this parameter to ON will clear the radio counters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipRadioCfgIfLoopback 1.3.6.1.4.1.2281.10.7.2.1.5
The administrative state of the IF loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), towardsSystem(1)  

genEquipRadioCfgExcessiveBERThreshold 1.3.6.1.4.1.2281.10.7.2.1.6
The BER threshold that when exceeded will be considered as 'Excessive BER'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ThresholdExponent  

genEquipRadioCfgSignalDegradeThreshold 1.3.6.1.4.1.2281.10.7.2.1.7
The BER (Bit Error Rate) threshold that when exceeded will be considered as 'Signal Degrade'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ThresholdExponent  

genEquipRadioCfgRadioAdmin 1.3.6.1.4.1.2281.10.7.2.1.8
Radio Admin state (Enable,Disable) can be used in ifTable::ifAdminStatus
Status: obsolete Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioCfgRadioOperationalStatus 1.3.6.1.4.1.2281.10.7.2.1.9
The operational status of the radio interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipRadioCfgRadioTrafficPriorityScheme 1.3.6.1.4.1.2281.10.7.2.1.10
this parameter configures the relative priority of different traffic streams. High-tdm-over-high-ethernet gives priorities as follows: (1) TDM high priority (2) Ethernet high priority (3) TDM low priority (4) Etherenet low priority. High-Ethernet-over-tdm gives priorities as follows: (1) Ethernet high priority (2) TDM high priority (3) TDM low priority (4) Etherenet low priority. Tdm-over-ethernet gives priorities as follows: (1) TDM high priority (2) TDM low priority (3) Ethernet
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER high-tdm-over-ethernet(0), high-ethernet-over-tdm(1), high-tdm-over-high-ethernet(2)  

genEquipRadioCfgRadioHiPriorityEthernetBW 1.3.6.1.4.1.2281.10.7.2.1.11
this parameter configures the amount of bandwith reserved for high-priority Ethernet. It must be a number in resolution of 2.048 Mbit/s for E1 systems or 1.544 Mbit/s for T1 systems. The maximum possible capacity is given by genEquipRadioCfgRadioCurrentAvailableCapacity
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..500000  

genEquipRadioCfgRadioMultiRadioEnable 1.3.6.1.4.1.2281.10.7.2.1.12
this parameter enables/disables the multi-radio feature for this radio. Notice that for the feature to work it must be configured in two adjacent radios (odd and even slots)
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioCfgRadioMultiRadioBlockLocalTraffic 1.3.6.1.4.1.2281.10.7.2.1.13
this parameter allows stopping distribution of data to different radios in Multi-Radio mode for debugging purposes
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dont-block(0), block-this-radio(1)  

genEquipRadioCfgRadioMultiRadioBlockMateTraffic 1.3.6.1.4.1.2281.10.7.2.1.14
this parameter allows stopping distribution of data to the radio in the mate IDU in Multi-Radio mode for debugging purposes
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dont-block(0), block-this-radio(1)  

genEquipRadioCfgRadioCurrentAvailableCapacity 1.3.6.1.4.1.2281.10.7.2.1.15
This parameter indicates the maximum possible capacity available for Ethernet. This sets a top limit for amount of high-priority Ethernet bandwidth
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioCfgRadioMultiRadioExcessiveBERAdmin 1.3.6.1.4.1.2281.10.7.2.1.16
This parameter configures whether in Multi-Radio mode data stops being distributed to the radio in case of an excessive BER condition
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioCfgRadioMultiRadioSignalDegradeAdmin 1.3.6.1.4.1.2281.10.7.2.1.17
This parameter configures whether in Multi-Radio mode data stops being distributed to the radio in case of a signal degraded condition
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioCfgEnAlarmGenOnRslDegrade 1.3.6.1.4.1.2281.10.7.2.1.18
TEnable/Disable alarm and trapgeneration on RSL degradationbelow user defined threshold.If enabled, trap and alarm willbe generated when current RSLlevel degrades below userdefined threshold for 5subsequent seconds. Alarm willbe cleared after RSL level staysabove the threshold for at leastanother 5 seconds. Thresholdis calculated as a nominal RSLlevel minus the degradationmargin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioCfgAlarmGenRslNominalLevel 1.3.6.1.4.1.2281.10.7.2.1.19
RSL nominal level [in dBm] foralarm and event generation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -100..0  

genEquipRadioCfgAlarmGenRslDegradationMargin 1.3.6.1.4.1.2281.10.7.2.1.20
RSL degradation margin [in dB]for alarm and eventgeneration. The margin isrelative to the nominal RSLlevel
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..30  

genEquipRadioCfgLinkShutDownOnRadioFailure 1.3.6.1.4.1.2281.10.7.2.1.21
This parameter enables shutting down the link and initiating automatic state propagation upon a failure in each one of the radios. Radio failure condition is determined by user configurations and can be one of the following: Radio LOF, Link ID mismatch, Radio excessive BER, Radio signal degrade, Link ID mismatch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioCfgLoopbackTimeout 1.3.6.1.4.1.2281.10.7.2.1.22
The timeout in minutes for automatic termination of the loopback. The value '0' refers to 'no timeout'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1440  

genEquipRadioCfgAbcMode 1.3.6.1.4.1.2281.10.7.2.1.23
TThe radio mode (multi direction or multi carrier).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER multi-carrier-abc(2), multi-directional(3)  

genEquipRemoteRadio 1.3.6.1.4.1.2281.10.7.3
OBJECT IDENTIFIER    

genEquipRemoteRadioTable 1.3.6.1.4.1.2281.10.7.3.1
Remote radio table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRemoteRadioEntry

genEquipRemoteRadioEntry 1.3.6.1.4.1.2281.10.7.3.1.1
Remote radio table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRemoteRadioEntry  

genEquipRemoteRadioRadioId 1.3.6.1.4.1.2281.10.7.3.1.1.1
This value is the radio ID that serves as this table Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  RadioId  

genEquipRemoteRadioRemoteCommunication 1.3.6.1.4.1.2281.10.7.3.1.1.2
The operational status of the remote radio.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipRemoteRadioRemoteIPAddr 1.3.6.1.4.1.2281.10.7.3.1.1.3
The remote Ip address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipRemoteRadioRemoteRxLevel 1.3.6.1.4.1.2281.10.7.3.1.1.4
The Rx level of the remote radio (in dBm)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -199..0  

genEquipRemoteRadioRemoteForceMaxTxLevel 1.3.6.1.4.1.2281.10.7.3.1.1.5
Command that forces the remote radio maximum Tx level (in dBm)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -50..34  

genEquipRemoteRadioRemoteTxFreq 1.3.6.1.4.1.2281.10.7.3.1.1.6
The remote radio Tx frequancy (in MHz).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRemoteRadioRemoteRxFreq 1.3.6.1.4.1.2281.10.7.3.1.1.7
The remote radio Rx frequancy (in MHz).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRemoteRadioRemoteATPCReferenceRxLevel 1.3.6.1.4.1.2281.10.7.3.1.1.8
The RSL reference level for the ATPC mechanism in the remote radio.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..199  

genEquipRemoteRadioRemoteFloatingIPAddr 1.3.6.1.4.1.2281.10.7.3.1.1.9
This value indicates the floating IP address used in the remote shelf if its main units are in 1+1 protection mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipRemoteRadioRemoteDefaultGateway 1.3.6.1.4.1.2281.10.7.3.1.1.10
Default gateway of remote NE (Network Element) across this radio link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

genEquipRemoteRadioRemoteMostSevereAlarm 1.3.6.1.4.1.2281.10.7.3.1.1.11
Most severe alarm of remote NE (Network Element) across this radio link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Severity  

genEquipRemoteRadioRemoteSubnetMask 1.3.6.1.4.1.2281.10.7.3.1.1.12
Subnet mask of remote NE (Network Element) across this radio link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

genEquipRemoteRadioRemoteSlotID 1.3.6.1.4.1.2281.10.7.3.1.1.13
The remote radio slot number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..6  

genEquipRemoteRadioRemoteForceTxMute 1.3.6.1.4.1.2281.10.7.3.1.1.14
Force the mute state of the remote unit radio interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipRemoteRadioRemoteLinkId 1.3.6.1.4.1.2281.10.7.3.1.1.15
The Link Id of the remote unit radio interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRemoteRadioRemoteATPCoverrideState 1.3.6.1.4.1.2281.10.7.3.1.1.16
Remote Radio ATPC Override Timer expire state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NoYes  

genEquipRemoteRadioRemoteATPCoverrideStateCancel 1.3.6.1.4.1.2281.10.7.3.1.1.17
his coomand cancel remote ATPC override state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NoYes  

genEquipRemoteRadioRemoteDataLoopBackAdmin 1.3.6.1.4.1.2281.10.7.3.1.1.18
Remote unit administrator state of data loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRemoteRadioRemoteDataLoopBackDuration 1.3.6.1.4.1.2281.10.7.3.1.1.19
Remote Data LoopBack Duration at remote unit[Minutes], zero for infinite loop back.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRemoteRadioRemoteDataLoopBackSwitchAddress 1.3.6.1.4.1.2281.10.7.3.1.1.20
Remote Unit switch MAC DA.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRemoteRadioRemoteGreenReferenceRxLevel 1.3.6.1.4.1.2281.10.7.3.1.1.21
Remote Radio Green RSL reference level[dBm].
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRemoteRadioRemoteMNGvlan 1.3.6.1.4.1.2281.10.7.3.1.1.22
Remote Management Vlan.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRemoteRadioRemoteReset 1.3.6.1.4.1.2281.10.7.3.1.1.23
Remote reset of unit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FalseTrue  

genEquipRemoteRadioRemoteGreenModeAdmin 1.3.6.1.4.1.2281.10.7.3.1.1.24
Remote Unit Tx Green Mode Admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRemoteRadioRemoteWebProtocol 1.3.6.1.4.1.2281.10.7.3.1.1.25
Remote web protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  CommunicationChannel  

genEquipRemoteRadioRemoteIPv6Addr 1.3.6.1.4.1.2281.10.7.3.1.1.26
Remote IPv6 Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

genEquipRemoteRadioRemotePrefixLength 1.3.6.1.4.1.2281.10.7.3.1.1.27
Remote IPv6 Subnet-Mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRemoteRadioRemoteDefaultGatewayIpv6 1.3.6.1.4.1.2281.10.7.3.1.1.28
Remote IPv6 Default Gateway.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

genEquipRemoteRadioRemoteResetSlot 1.3.6.1.4.1.2281.10.7.3.1.1.29
Remote Unit Reset Slot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FalseTrue  

genEquipRadioMRMC 1.3.6.1.4.1.2281.10.7.4
OBJECT IDENTIFIER    

genEquipRadioMRMCTable 1.3.6.1.4.1.2281.10.7.4.1
MRMC stauts table (Multi rate multi constellation)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioMRMCEntry

genEquipRadioMRMCEntry 1.3.6.1.4.1.2281.10.7.4.1.1
MRMC status table (Multi rate multi constellation)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioMRMCEntry  

genEquipRadioMRMCRadioId 1.3.6.1.4.1.2281.10.7.4.1.1.1
This value is the radio ID that serves as this table Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  RadioId  

genEquipRadioMRMCSelectedScriptIndex 1.3.6.1.4.1.2281.10.7.4.1.1.2
The index of the MRMC script. The description of the script located in the genEquipRadioMRMCScriptTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioMRMCOccupidBandwidth 1.3.6.1.4.1.2281.10.7.4.1.1.3
The Occupid Bandwidth (in KHz).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioMRMCOperMode 1.3.6.1.4.1.2281.10.7.4.1.1.4
The Mode of the MRMC script.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER regular-mode(0), acm-fixed-mode(1), acm-adaptive-mode(2)  

genEquipRadioMRMCCurrTxProfile 1.3.6.1.4.1.2281.10.7.4.1.1.5
The Tx profile number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MrmcProfile  

genEquipRadioMRMCCurrTxQAM 1.3.6.1.4.1.2281.10.7.4.1.1.6
The current Tx QAM (modulation).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 4..2048  

genEquipRadioMRMCCurrTxBitrate 1.3.6.1.4.1.2281.10.7.4.1.1.7
The current Tx bit rate (in Kbps)
Status: mandatory Access: read-only
OBJECT-TYPE    
  MrmcBitRate  

genEquipRadioMRMCCurrTxVc 1.3.6.1.4.1.2281.10.7.4.1.1.8
The current number of Tx TDM channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1024  

genEquipRadioMRMCCurrRxProfile 1.3.6.1.4.1.2281.10.7.4.1.1.9
The current Rx profile number
Status: mandatory Access: read-only
OBJECT-TYPE    
  MrmcProfile  

genEquipRadioMRMCCurrRxQAM 1.3.6.1.4.1.2281.10.7.4.1.1.10
The current Rx QAM (modulation).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 4..2048  

genEquipRadioMRMCCurrRxBitrate 1.3.6.1.4.1.2281.10.7.4.1.1.11
The current total Rx bit rate (in Kbps)
Status: mandatory Access: read-only
OBJECT-TYPE    
  MrmcBitRate  

genEquipRadioMRMCCurrRxVc 1.3.6.1.4.1.2281.10.7.4.1.1.12
The current number of Rx TDM channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1024  

genEquipRadioMRMCCurrGrade 1.3.6.1.4.1.2281.10.7.4.1.1.13
The grade of the current script.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RfuGrade  

genEquipRadioMRMCEnAlarmOnAcmProfileDegrade 1.3.6.1.4.1.2281.10.7.4.1.1.14
Enable/Disable event and trapgeneration on ACM profiledegrade. When enabled and ifcurrent radio script supports Adaptive Code Modulation(ACM) event and trap will begenerated upon ACM profiledegradation below userdefinedthreshold. Alarm willbe generated only if the ACMprofile stays below thethreshold for at least 5 subsequent seconds. Alarm willbe cleared after ACM profilereturns to be above thethreshold again.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioMRMCAlarmOnAcmProfileDegradeThreshold 1.3.6.1.4.1.2281.10.7.4.1.1.15
ACM profile threshold foralarm generation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..7  

genEquipRadioMRMCScriptTable 1.3.6.1.4.1.2281.10.7.4.2
The MRMC script table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioMRMCScriptEntry

genEquipRadioMRMCScriptEntry 1.3.6.1.4.1.2281.10.7.4.2.1
The MRMC script table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioMRMCScriptEntry  

genEquipRadioMRMCScriptRadioId 1.3.6.1.4.1.2281.10.7.4.2.1.1
This value is the radio ID that serves as this table Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  RadioId  

genEquipRadioMRMCScriptIndex 1.3.6.1.4.1.2281.10.7.4.2.1.2
The index of the MRMC scripts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioMRMCScriptName 1.3.6.1.4.1.2281.10.7.4.2.1.3
The MRMC script name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipRadioMRMCScriptOperMode 1.3.6.1.4.1.2281.10.7.4.2.1.4
The script operational mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER regular-mode(0), acm-fixed-mode(1), acm-adaptive-mode(2)  

genEquipRadioMRMCScriptProfile 1.3.6.1.4.1.2281.10.7.4.2.1.5
The profile number of the script
Status: mandatory Access: read-only
OBJECT-TYPE    
  MrmcProfile  

genEquipRadioMRMCScriptProfileBitrate 1.3.6.1.4.1.2281.10.7.4.2.1.6
The Bit rate of the MRMC profile (in Kbps).
Status: mandatory Access: read-only
OBJECT-TYPE    
  MrmcBitRate  

genEquipRadioMRMCScriptAdaptivePower 1.3.6.1.4.1.2281.10.7.4.2.1.7
'Adaptive Power' option which is available only when operation mode is ACM-adaptive
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable-adaptive-power(0), disable-adaptive-power(1)  

genEquipRadioMRMCScriptReference 1.3.6.1.4.1.2281.10.7.4.2.1.8
'Reference Class' option which is available only when operation mode 'ACM-adaptive' AND 'Adaptive Power' are enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER calss-2(0), class-4(1), class-5b(2), class-6a(3), fcc(4)  

genEquipRadioMRMCScriptMinProfile 1.3.6.1.4.1.2281.10.7.4.2.1.9
'Minimum Profile' option which is available only when operation mode 'ACM-adaptive' AND 'Adaptive Power' are enabled. It state the minimum profile level for this script.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MrmcProfile  

genEquipRadioMRMCFilteredTable 1.3.6.1.4.1.2281.10.7.4.3
Filtered MRMC scripts table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioMRMCFilteredEntry

genEquipRadioMRMCFilteredEntry 1.3.6.1.4.1.2281.10.7.4.3.1
List of the filtered MRMC scripts.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioMRMCFilteredEntry  

genEquipRadioMRMCFilteredRadioId 1.3.6.1.4.1.2281.10.7.4.3.1.1
The index of the radio interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  RadioId  

genEquipRadioMRMCFilteredScriptId 1.3.6.1.4.1.2281.10.7.4.3.1.2
The MRMC filtered script IDs that are available in the specific radio.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MrmcScriptId  

genEquipRadioMRMCProfileAttrTable 1.3.6.1.4.1.2281.10.7.4.4
MRMC profile attribute table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioMRMCProfileAttrEntry

genEquipRadioMRMCProfileAttrEntry 1.3.6.1.4.1.2281.10.7.4.4.1
MRMC script profile's attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioMRMCProfileAttrEntry  

genEquipRadioMRMCProfileAttrScriptId 1.3.6.1.4.1.2281.10.7.4.4.1.1
The index of the table
Status: mandatory Access: read-only
OBJECT-TYPE    
  MrmcScriptId  

genEquipRadioMRMCProfileAttrTxProfile 1.3.6.1.4.1.2281.10.7.4.4.1.2
The profile number of the TX channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MrmcProfile  

genEquipRadioMRMCProfileAttrRxProfile 1.3.6.1.4.1.2281.10.7.4.4.1.3
The profile number of the RX channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MrmcProfile  

genEquipRadioMRMCProfileAttrTxQAM 1.3.6.1.4.1.2281.10.7.4.4.1.4
Indicates the QAM level of the TX channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  QamOrder  

genEquipRadioMRMCProfileAttrTxBitRate 1.3.6.1.4.1.2281.10.7.4.4.1.5
Indicates the TX bit-rate of the profile.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MrmcBitRate  

genEquipRadioMRMCProfileAttrRxQAM 1.3.6.1.4.1.2281.10.7.4.4.1.6
Indicates the QAM level of the RX channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  QamOrder  

genEquipRadioMRMCProfileAttrRxBitRate 1.3.6.1.4.1.2281.10.7.4.4.1.7
RX bit-rate of the profile.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MrmcBitRate  

genEquipRadioMRMCScriptAttrTable 1.3.6.1.4.1.2281.10.7.4.5
MRMC script attribute table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioMRMCScriptAttrEntry

genEquipRadioMRMCScriptAttrEntry 1.3.6.1.4.1.2281.10.7.4.5.1
MRMC script attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioMRMCScriptAttrEntry  

genEquipRadioMRMCScriptAttrScriptId 1.3.6.1.4.1.2281.10.7.4.5.1.1
The ID of the MRMC script.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MrmcScriptId  

genEquipRadioMRMCScriptAttrScriptName 1.3.6.1.4.1.2281.10.7.4.5.1.2
The name that identifies the script.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..100)  

genEquipRadioMRMCScriptAttrSupportACM 1.3.6.1.4.1.2281.10.7.4.5.1.3
Indicates if the MRMC script supports ACM (Adaptive Coding Modulation) functionality
Status: mandatory Access: read-only
OBJECT-TYPE    
  NoYes  

genEquipRadioMRMCScriptAttrStandard 1.3.6.1.4.1.2281.10.7.4.5.1.4
The standard that the MRMC script is designed to comply with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), etsi(1), fcc(2), etsi-fcc(3)  

genEquipRadioMRMCScriptAttrMultiCarrier 1.3.6.1.4.1.2281.10.7.4.5.1.5
Indicates whether the MRMC script support a single carrier or any kind of multi carrier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER single-carrier(0), xpic(1), mimo(2)  

genEquipRadioMRMCScriptAttrAdjChannel 1.3.6.1.4.1.2281.10.7.4.5.1.6
Indicates whether the MRMC script supports adjacent channel
Status: mandatory Access: read-only
OBJECT-TYPE    
  NoYes  

genEquipRadioMRMCScriptAttrModScheme 1.3.6.1.4.1.2281.10.7.4.5.1.7
Indicates whether the MRMC script supports fixed or adaptive (ACM) modulation scheme.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER regular(2), fixed(3), adaptive(4), fixed-adaptive(5), manual(6)  

genEquipRadioMRMCScriptAttrSymmetry 1.3.6.1.4.1.2281.10.7.4.5.1.8
Indicates whether the MRMC script is designed to normal (symmetrical) BW or an Asymmetrical BW.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), asymmetry(1)  

genEquipRadioMRMCScriptAttrLatency 1.3.6.1.4.1.2281.10.7.4.5.1.9
The Latency level of the MRMC Script.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), low(1)  

genEquipRadioMRMCScriptAttrTxBW 1.3.6.1.4.1.2281.10.7.4.5.1.10
The TX channel bandwidth (channel spacing) of the MRMC script.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..512000  

genEquipRadioMRMCScriptAttrRxBW 1.3.6.1.4.1.2281.10.7.4.5.1.11
The RX channel bandwidth (channel spacing) of the MRMC script.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..512000  

genEquipRadioMRMCScriptAttrTxOccupiedBW 1.3.6.1.4.1.2281.10.7.4.5.1.12
The TX channel occupied bandwidth of the MRMC script.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..512000  

genEquipRadioMRMCScriptAttrRxOccupiedBW 1.3.6.1.4.1.2281.10.7.4.5.1.13
The RX channel occupied bandwidth of the MRMC script.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioMRMCScriptAttrLinkGrade 1.3.6.1.4.1.2281.10.7.4.5.1.14
The link grade level that the MRMC script is designed to cope with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RfuGrade  

genEquipRadioMRMCScriptAttrDiffGrade 1.3.6.1.4.1.2281.10.7.4.5.1.15
The Differential grade level that the MRMC script is designed to cope with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RfuGrade  

genEquipRadioMRMCScriptAttrChannelBW 1.3.6.1.4.1.2281.10.7.4.5.1.16
The channel bandwidth (channel spacing) the MRMC script is designed to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..512000  

genEquipRadioMRMCScriptAttrTxMaxProfile 1.3.6.1.4.1.2281.10.7.4.5.1.17
The maximum available TX profile of the MRMC script.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MrmcProfile  

genEquipRadioMRMCScriptAttrRxMaxProfile 1.3.6.1.4.1.2281.10.7.4.5.1.18
The maximum available RX profile of the MRMC script.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MrmcProfile  

genEquipRadioMRMCConfigTable 1.3.6.1.4.1.2281.10.7.4.6
MRMC script configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioMRMCConfigEntry

genEquipRadioMRMCConfigEntry 1.3.6.1.4.1.2281.10.7.4.6.1
The configured parameters of the MRMC script.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioMRMCConfigEntry  

genEquipRadioMRMCConfigRadioId 1.3.6.1.4.1.2281.10.7.4.6.1.1
The index of the MRMC Configuration Table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RadioId  

genEquipRadioMRMCConfigActiveScriptId 1.3.6.1.4.1.2281.10.7.4.6.1.2
The script ID of required MRMC script.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MrmcScriptId  

genEquipRadioMRMCConfigStandbyScriptId 1.3.6.1.4.1.2281.10.7.4.6.1.3
The script ID which is in standby.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MrmcScriptId  

genEquipRadioMRMCConfigOperMode 1.3.6.1.4.1.2281.10.7.4.6.1.4
The operational mode of the MRMC script, whether it is fixed or adaptive modulation functionality.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fixed(2), adaptive(3), manual(4)  

genEquipRadioMRMCConfigMaxProfile 1.3.6.1.4.1.2281.10.7.4.6.1.5
The maximum profile which is required for the MRMC script
Status: mandatory Access: read-write
OBJECT-TYPE    
  MrmcProfile  

genEquipRadioMRMCConfigMinProfile 1.3.6.1.4.1.2281.10.7.4.6.1.6
The minimum profile which is required for the MRMC script
Status: mandatory Access: read-write
OBJECT-TYPE    
  MrmcProfile  

genEquipRadioMRMCConfigAdaptivePowerAdmin 1.3.6.1.4.1.2281.10.7.4.6.1.7
Enable or disable the adaptive power functionality during ACM operation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioMRMCConfigAdaptivePowerRefClass 1.3.6.1.4.1.2281.10.7.4.6.1.8
Determines the efficiency class for the adaptive power functionality in ACM operation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER class-2(0), class-4(1), class-5b(2), class-6a(3), fcc(4), class-7a(5), class-7b(6)  

genEquipRadioComp 1.3.6.1.4.1.2281.10.7.5
OBJECT IDENTIFIER    

genEquipRadioCompCfgTable 1.3.6.1.4.1.2281.10.7.5.1
Radio Compression table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioCompCfgEntry

genEquipRadioCompCfgEntry 1.3.6.1.4.1.2281.10.7.5.1.1
Radio Compression table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioCompCfgEntry  

genEquipRadioCompMode 1.3.6.1.4.1.2281.10.7.5.1.1.1
Setting Ethernet packet header & payload compression mode. In Enhanced mode packet header can be compressed up to L4 and data compression can be activated. Legacy mode is back compatible to earlier software and hardware releases.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER legacy(0), enhanced(1)  

genEquipRadioEnhHeaderCompAdmin 1.3.6.1.4.1.2281.10.7.5.1.1.2
Enable/Disable Enhanced Header compression.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AllowedNotAllowed  

genEquipRadioEnhDataCompAdmin 1.3.6.1.4.1.2281.10.7.5.1.1.3
Enable/Disable Enhanced Data compression.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioEnhHeaderCompMode 1.3.6.1.4.1.2281.10.7.5.1.1.4
Setting Enhanced Header Compression depth.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER l2(0), l3(1), l4(2)  

genEquipRadioCompStatusTable 1.3.6.1.4.1.2281.10.7.5.2
Radio Compression status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioCompStatusEntry

genEquipRadioCompStatusEntry 1.3.6.1.4.1.2281.10.7.5.2.1
Radio Compression status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioCompStatusEntry  

genEquipRadioCompOperationalState 1.3.6.1.4.1.2281.10.7.5.2.1.1
Current compression mode operational status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER legacy(0), enhanced-HC-DC-bypass(1), enhanced-HC-active-DC-bypass(2), enhanced-DC-active-HC-bypass(3), enhanced-HC-DC-active(4), undefined(5)  

genEquipRadioCompExclRulesTable 1.3.6.1.4.1.2281.10.7.5.3
Enhanced Header Compression excluding rules table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioCompExclRulesEntry

genEquipRadioCompExclRulesEntry 1.3.6.1.4.1.2281.10.7.5.3.1
Enhanced Header Compression excluding rules table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioCompExclRulesEntry  

genEquipRadioCompExclRuleId 1.3.6.1.4.1.2281.10.7.5.3.1.1
Excluding rule number index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

genEquipRadioCompExclRuleType 1.3.6.1.4.1.2281.10.7.5.3.1.2
Add excluding rule for enhanced header compression. Excluding rule must have a number (rule-id), text description (rule-name) and excluding rule type whichcan be one of the following: VLAN Id or MAC destination address or MAC source address or Ethernet ethertype or user defined flow type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER flow-Id(0), vlan(1), mac-DA(2), mac-SA(3), ethertype(4), none(5)  

genEquipRadioCompExclRuleName 1.3.6.1.4.1.2281.10.7.5.3.1.3
Excluding rule name. User specified.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipRadioCompExclRuleValue 1.3.6.1.4.1.2281.10.7.5.3.1.4
Excluding rule value. For example: MAC address or Ethertype.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

genEquipRadioCompExclRuleRowStatus 1.3.6.1.4.1.2281.10.7.5.3.1.30
Row status for this table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipRadioCompNG 1.3.6.1.4.1.2281.10.7.5.4
OBJECT IDENTIFIER    

genEquipRadioCompNGCfgTable 1.3.6.1.4.1.2281.10.7.5.4.1
Radio Ethernet and compression config table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioCompNGCfgEntry

genEquipRadioCompNGCfgEntry 1.3.6.1.4.1.2281.10.7.5.4.1.1
Radio Ethernet and compression config table entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioCompNGCfgEntry  

genEquipRadioCompNGCfgifIndex 1.3.6.1.4.1.2281.10.7.5.4.1.1.1
Interface Index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioHeaderCompNGCfgClearStats 1.3.6.1.4.1.2281.10.7.5.4.1.1.2
Clear counters on the radio port. This includes: compression counters, PTP optimized transport and cut-through counters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NoYes  

genEquipRadioHeaderCompNGCfgUserFlowType 1.3.6.1.4.1.2281.10.7.5.4.1.1.3
User configured flow type for enhanced HC. This flow type is used for statistics and performance evaluation of the enhanced HC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioHeaderCompNGCfgMode 1.3.6.1.4.1.2281.10.7.5.4.1.1.4
Legacy mode is compatible for old platforms. Disabled mode disables compression. Other modes specify compression depth.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HcModeType  

genEquipRadioCutThroughNGCfgMode 1.3.6.1.4.1.2281.10.7.5.4.1.1.5
Enable/Disable cut-through.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NoYes  

genEquipRadioCompNGExclRulesTable 1.3.6.1.4.1.2281.10.7.5.4.2
Enhanced HC excluding rules table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioCompNGExclRulesEntry

genEquipRadioCompNGExclRulesEntry 1.3.6.1.4.1.2281.10.7.5.4.2.1
Enhanced HC excluding rules table entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioCompNGExclRulesEntry  

genEquipRadioCompNGExclRulesifIndex 1.3.6.1.4.1.2281.10.7.5.4.2.1.1
Interface Index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioCompNGExclRuleId 1.3.6.1.4.1.2281.10.7.5.4.2.1.2
Excluding rule number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioCompNGExclRuleName 1.3.6.1.4.1.2281.10.7.5.4.2.1.3
Excluding rule name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

genEquipRadioCompNGExclRuleType 1.3.6.1.4.1.2281.10.7.5.4.2.1.4
Excluding rule type. Possible options are: DA MAC, SA MAC, VLAN(4 bytes), Ethertype or Flow type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  EnhancedHCExclRuleType  

genEquipRadioCompNGExclRuleValue 1.3.6.1.4.1.2281.10.7.5.4.2.1.5
Excluding rule value. The value may be MAC address, VLAN(4 bytes), Ethertype(2 bytes) or Flow type(1 byte).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

genEquipRadioCutThroughNGCountersTable 1.3.6.1.4.1.2281.10.7.5.4.3
Port counters table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioCutThroughNGCountersEntry

genEquipRadioCutThroughNGCountersEntry 1.3.6.1.4.1.2281.10.7.5.4.3.1
Port counters table entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioCutThroughNGCountersEntry  

genEquipRadioCutThroughNGCountersifIndex 1.3.6.1.4.1.2281.10.7.5.4.3.1.1
Interface Index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioCutThroughNGCountersRxFrames 1.3.6.1.4.1.2281.10.7.5.4.3.1.2
Counter of good cut-through bytes received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCutThroughNGCountersRxBytes 1.3.6.1.4.1.2281.10.7.5.4.3.1.3
Counter of good cut-through bytes received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCutThroughNGCountersTxFrames 1.3.6.1.4.1.2281.10.7.5.4.3.1.4
Counter of cut-through frames transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCutThroughNGCountersTxBytes 1.3.6.1.4.1.2281.10.7.5.4.3.1.5
Counter of cut-through bytes transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCutThroughNGCountersTotalRxFrames 1.3.6.1.4.1.2281.10.7.5.4.3.1.6
Counter of total good frames received on the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCutThroughNGCountersTotalRxBytes 1.3.6.1.4.1.2281.10.7.5.4.3.1.7
Counter of total good bytes received on the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCutThroughNGCountersTotalTxBytesOut 1.3.6.1.4.1.2281.10.7.5.4.3.1.8
Counter of total transmitted bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCutThroughNGCountersTotalTxFrames 1.3.6.1.4.1.2281.10.7.5.4.3.1.9
Counter of total transmitted frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCutThroughNGCountersTotalTxIdleBytes 1.3.6.1.4.1.2281.10.7.5.4.3.1.10
Counter of total transmitted idle bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCutThroughNGCountersTotalTxBytesIn 1.3.6.1.4.1.2281.10.7.5.4.3.1.11
Counter of total transmitted bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCompNGStatusTable 1.3.6.1.4.1.2281.10.7.5.4.4
Radio Ethernet and compression status table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioCompNGStatusEntry

genEquipRadioCompNGStatusEntry 1.3.6.1.4.1.2281.10.7.5.4.4.1
Radio Ethernet and compression status table entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioCompNGStatusEntry  

genEquipRadioCompNGStatusifindex 1.3.6.1.4.1.2281.10.7.5.4.4.1.1
Interface location.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioCompNGStatusOperationalState 1.3.6.1.4.1.2281.10.7.5.4.4.1.2
Header Compression operational state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HcModeType  

genEquipRadioCompNGStatusType 1.3.6.1.4.1.2281.10.7.5.4.4.1.3
Header Compression type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HcType  

genEquipRadioCompNGCountersTable 1.3.6.1.4.1.2281.10.7.5.4.7
Enhanced HC counters table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioCompNGCountersEntry

genEquipRadioCompNGCountersEntry 1.3.6.1.4.1.2281.10.7.5.4.7.1
Enhanced HC counters table entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioCompNGCountersEntry  

genEquipRadioCompNGCountersifIndex 1.3.6.1.4.1.2281.10.7.5.4.7.1.1
Interface location.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioCompNGCountersHCInBytes 1.3.6.1.4.1.2281.10.7.5.4.7.1.2
Counter of bytes on the TX side before enhanced header compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCompNGCountersHCOutBytes 1.3.6.1.4.1.2281.10.7.5.4.7.1.3
Counter of bytes on the TX side compressed by enhanced header compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCompNGCountersHCCompFrm 1.3.6.1.4.1.2281.10.7.5.4.7.1.4
Counter of frames on the TX side compressed by enhanced header compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCompNGCountersHCFrmUncmpExclRule 1.3.6.1.4.1.2281.10.7.5.4.7.1.5
Counter of frames on the TX side not compressed by enhanced header compression due to excluding rules.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCompNGCountersHCFrmUcompInternal 1.3.6.1.4.1.2281.10.7.5.4.7.1.6
Counter of frames on the TX side not compressed by enhanced header compression due to other resons.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCompNGCountersHCLearningFrm 1.3.6.1.4.1.2281.10.7.5.4.7.1.7
Counter of learning frames transmitted by enhanced header compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCompNGCountersHCUserFlowTypeActiveFlows 1.3.6.1.4.1.2281.10.7.5.4.7.1.8
Number of enhanced HC active flows occupied by user selected flow type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioCompNGCountersHCTotalActiveFlows 1.3.6.1.4.1.2281.10.7.5.4.7.1.9
Number of enhanced HC active flows on the TX side.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipRadioPtpTransport 1.3.6.1.4.1.2281.10.7.6
OBJECT IDENTIFIER    

genEquipRadioPtpTransportCfgTable 1.3.6.1.4.1.2281.10.7.6.1
PTP optimized transport channel configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioPtpTransportCfgEntry

genEquipRadioPtpTransportCfgEntry 1.3.6.1.4.1.2281.10.7.6.1.1
PTP optimized transport channel configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioPtpTransportCfgEntry  

genEquipRadioPtpTransportChannelAdmin 1.3.6.1.4.1.2281.10.7.6.1.1.1
PTP optimized transport admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioPtpTransportChannelMode 1.3.6.1.4.1.2281.10.7.6.1.1.2
PTP optimized transport operational mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER h-cos(0), ieee-1588(1)  

genEquipRadioPtpTransportCountersTable 1.3.6.1.4.1.2281.10.7.6.2
PTP optimized transport channel counters table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioPtpTransportCountersEntry

genEquipRadioPtpTransportCountersEntry 1.3.6.1.4.1.2281.10.7.6.2.1
PTP optimized transport channel counters table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioPtpTransportCountersEntry  

genEquipRadioPtpTransportTxFrames 1.3.6.1.4.1.2281.10.7.6.2.1.1
PTP optimized transport TX frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioPtpTransportTxDroppedFrames 1.3.6.1.4.1.2281.10.7.6.2.1.2
PTP optimized transport TX dropped frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioPtpTransportTxBytes 1.3.6.1.4.1.2281.10.7.6.2.1.3
PTP optimized transport TX bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioPtpTransportTxDroppedBytes 1.3.6.1.4.1.2281.10.7.6.2.1.4
PTP optimized transport TX dropped bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioPtpTransportRxFrames 1.3.6.1.4.1.2281.10.7.6.2.1.5
PTP optimized transport RX frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioPtpTransportRxBytes 1.3.6.1.4.1.2281.10.7.6.2.1.6
PTP optimized transport RX bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioCutThrough 1.3.6.1.4.1.2281.10.7.7
OBJECT IDENTIFIER    

genEquipRadioCutThroughCfgTable 1.3.6.1.4.1.2281.10.7.7.1
Cut through configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioCutThroughCfgEntry

genEquipRadioCutThroughCfgEntry 1.3.6.1.4.1.2281.10.7.7.1.1
Cut through configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioCutThroughCfgEntry  

genEquipRadioCutThroughChannelAdmin 1.3.6.1.4.1.2281.10.7.7.1.1.1
Enable/Disable cut through mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioCutThroughCountersTable 1.3.6.1.4.1.2281.10.7.7.2
Cut through mode counters table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioCutThroughCountersEntry

genEquipRadioCutThroughCountersEntry 1.3.6.1.4.1.2281.10.7.7.2.1
Cut through mode counters table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioCutThroughCountersEntry  

genEquipRadioCutThroughTxFrames 1.3.6.1.4.1.2281.10.7.7.2.1.1
Cut through TX frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioCutThroughTxBytes 1.3.6.1.4.1.2281.10.7.7.2.1.2
Cut through TX bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioCutThroughRxFrames 1.3.6.1.4.1.2281.10.7.7.2.1.3
Cut through RX frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioCutThroughRxBytes 1.3.6.1.4.1.2281.10.7.7.2.1.4
Cut through RX bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroups 1.3.6.1.4.1.2281.10.7.8
OBJECT IDENTIFIER    

genEquipRadioGroupsProtection 1.3.6.1.4.1.2281.10.7.8.1
OBJECT IDENTIFIER    

genEquipRadioGroupsProtectionAttrTable 1.3.6.1.4.1.2281.10.7.8.1.1
This table contains the attributes of the radio protection groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsProtectionAttrEntry

genEquipRadioGroupsProtectionAttrEntry 1.3.6.1.4.1.2281.10.7.8.1.1.1
This table entry contains the attributes of the radio protection groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsProtectionAttrEntry  

genEquipRadioGroupsProtectionAttrGroupIfIndex 1.3.6.1.4.1.2281.10.7.8.1.1.1.1
The location of the group
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionAttrGroupId 1.3.6.1.4.1.2281.10.7.8.1.1.1.2
The Id of the radio protection group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

genEquipRadioGroupsProtectionAttrCommand 1.3.6.1.4.1.2281.10.7.8.1.1.1.3
Radio protection user commands for maintenance purposes: force-switch, lockout and manual-switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RadioProtectionCmd  

genEquipRadioGroupsProtectionAttrCopyToMate 1.3.6.1.4.1.2281.10.7.8.1.1.1.4
Copy to mate command that copies the configuration from one radio to another in order to achieve configuration alignment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipRadioGroupsProtectionAttrCopyToMateSourceIfIndex 1.3.6.1.4.1.2281.10.7.8.1.1.1.5
The radio location which is required to be the source of configuration for copy-to-mate command.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionAttrRevertiveAdmin 1.3.6.1.4.1.2281.10.7.8.1.1.1.6
Enable or disable revertive mode of radio protection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsProtectionAttrRevertivePrimaryIfIndex 1.3.6.1.4.1.2281.10.7.8.1.1.1.7
The radio which the system is required to revert to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionMembersTable 1.3.6.1.4.1.2281.10.7.8.1.2
This table contains the radio protection groups members.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsProtectionMembersEntry

genEquipRadioGroupsProtectionMembersEntry 1.3.6.1.4.1.2281.10.7.8.1.2.1
This table entry contains the radio protection groups members.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsProtectionMembersEntry  

genEquipRadioGroupsProtectionMembersIfIndexGroup 1.3.6.1.4.1.2281.10.7.8.1.2.1.1
The location of the radio protection group
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionMembersGroupId 1.3.6.1.4.1.2281.10.7.8.1.2.1.2
The Id of the radio protection group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

genEquipRadioGroupsProtectionMembersMem1IfIndex 1.3.6.1.4.1.2281.10.7.8.1.2.1.3
The radio location of member 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionMembersMem2IfIndex 1.3.6.1.4.1.2281.10.7.8.1.2.1.4
The radio location of member 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionMembersRowStatus 1.3.6.1.4.1.2281.10.7.8.1.2.1.30
Row status to allow user add entries dynamically.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipRadioGroupsProtectionStatusTable 1.3.6.1.4.1.2281.10.7.8.1.3
This table contains the status of the radio protection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsProtectionStatusEntry

genEquipRadioGroupsProtectionStatusEntry 1.3.6.1.4.1.2281.10.7.8.1.3.1
This table entry contains the status of the radio protection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsProtectionStatusEntry  

genEquipRadioGroupsProtectionStatusGroupIfIndex 1.3.6.1.4.1.2281.10.7.8.1.3.1.1
The location of the group
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionStatusActiveIfIndex 1.3.6.1.4.1.2281.10.7.8.1.3.1.2
The active radio location
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionStatusStandbyIfIndex 1.3.6.1.4.1.2281.10.7.8.1.3.1.3
The standby radio location.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionStatusLockout 1.3.6.1.4.1.2281.10.7.8.1.3.1.4
The radio location of member 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NoYes  

genEquipRadioGroupsProtectionBBSSD 1.3.6.1.4.1.2281.10.7.8.1.10
OBJECT IDENTIFIER    

genEquipRadioGroupsProtectionBBSSDAttrTable 1.3.6.1.4.1.2281.10.7.8.1.10.1
This table contains the BBS-SD attributes of the radio protection groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsProtectionBBSSDAttrEntry

genEquipRadioGroupsProtectionBBSSDAttrEntry 1.3.6.1.4.1.2281.10.7.8.1.10.1.1
This table entry contains the BBS-SD attributes of the radio protection groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsProtectionBBSSDAttrEntry  

genEquipRadioGroupsProtectionBBSSDAttrGroupIfIndex 1.3.6.1.4.1.2281.10.7.8.1.10.1.1.1
The location of the group
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionBBSSDAttrRevertive 1.3.6.1.4.1.2281.10.7.8.1.10.1.1.2
Enable or disable revertive mode for BBS-SD Rx switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsProtectionBBSSDAttrClrSwCnt 1.3.6.1.4.1.2281.10.7.8.1.10.1.1.3
Clear BBS-SD Rx switch counter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipRadioGroupsProtectionBBSSDAttrFWAuto 1.3.6.1.4.1.2281.10.7.8.1.10.1.1.4
Enable or disable automatic Rx switching in BBS-SD.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsProtectionBBSSDStatusTable 1.3.6.1.4.1.2281.10.7.8.1.10.2
This table contains the BBS-SD status of the radio protection groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsProtectionBBSSDStatusEntry

genEquipRadioGroupsProtectionBBSSDStatusEntry 1.3.6.1.4.1.2281.10.7.8.1.10.2.1
This table entry contains the BBS-SD status of the radio protection groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsProtectionBBSSDStatusEntry  

genEquipRadioGroupsProtectionBBSSDStatusGroupIfIndex 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.1
The location of the group
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionBBSSDStatusAbcGroupIfIndex 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.2
The attached MC-ABC group if_index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionBBSSDStatusActiveRxQuality 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.3
The active MC-ABC channel quality.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionBBSSDStatusActiveRxRadioIfIndex 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.4
The active rx radio if_index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionBBSSDStatusActiveTxRadioIfIndex 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.5
The active Tx radio if_index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionBBSSDStatusLockout 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.6
Indicates whether the radio protection is currently in lockout.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NoYes  

genEquipRadioGroupsProtectionBBSSDStatusRxChId 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.7
The attached MC-ABC channel ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionBBSSDStatusStdbyRxQuality 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.8
The standby MC-ABC channel quality.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionBBSSDStatusStdbyRxRadioIfIndex 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.9
The standby rx radio if_index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsProtectionBBSSDStatusStandbyTxRadioIfIndex 1.3.6.1.4.1.2281.10.7.8.1.10.2.1.10
The standby Tx radio if_index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsXpic 1.3.6.1.4.1.2281.10.7.8.2
OBJECT IDENTIFIER    

genEquipRadioGroupsXPICAttrTable 1.3.6.1.4.1.2281.10.7.8.2.1
This table contains the configuration of the radio XPIC groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsXPICAttrEntry

genEquipRadioGroupsXPICAttrEntry 1.3.6.1.4.1.2281.10.7.8.2.1.1
This table entry contains the configuration of the radio XPIC groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsXPICAttrEntry  

genEquipRadioGroupsXPICAttrGroupIfIndex 1.3.6.1.4.1.2281.10.7.8.2.1.1.1
The location of the group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsXPICAttrCopyToMateSourceIfIndex 1.3.6.1.4.1.2281.10.7.8.2.1.1.2
The radio location which is required to be the source of configuration for copy-to-mate command.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsXPICAttrGroupId 1.3.6.1.4.1.2281.10.7.8.2.1.1.3
XPIC group id.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

genEquipRadioGroupsXPICAttrXRSMAdmin 1.3.6.1.4.1.2281.10.7.8.2.1.1.4
Administrative state of XPIC recovery state machine.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsXPICAttrAdmin 1.3.6.1.4.1.2281.10.7.8.2.1.1.5
Administrative state of XPIC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsXPICAttrCopyToMate 1.3.6.1.4.1.2281.10.7.8.2.1.1.6
User Command to resolve the mismatch between the two carriers in the XPIC group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Copy2mate  

genEquipRadioGroupsXPICMembersTable 1.3.6.1.4.1.2281.10.7.8.2.2
This table contains the radio XPIC groups members.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsXPICMembersEntry

genEquipRadioGroupsXPICMembersEntry 1.3.6.1.4.1.2281.10.7.8.2.2.1
This table entry contains the radio XPIC groups members.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsXPICMembersEntry  

genEquipRadioGroupsXPICMembersIfIndexGroup 1.3.6.1.4.1.2281.10.7.8.2.2.1.1
The location of the radio XPIC group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsXPICMembersMem1IfIndex 1.3.6.1.4.1.2281.10.7.8.2.2.1.2
The radio location of member 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

genEquipRadioGroupsXPICMembersMem2IfIndex 1.3.6.1.4.1.2281.10.7.8.2.2.1.3
The radio location of member 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsXPICMembersRowStatus 1.3.6.1.4.1.2281.10.7.8.2.2.1.30
Row status to allow user add entries dynamically.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipRadioGroupsXPICStatusTable 1.3.6.1.4.1.2281.10.7.8.2.3
This table contains the status of the XPIC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsXPICStatusEntry

genEquipRadioGroupsXPICStatusEntry 1.3.6.1.4.1.2281.10.7.8.2.3.1
This table entry contains the status of the XPIC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsXPICStatusEntry  

genEquipRadioGroupsXPICStatusGroupIfIndex 1.3.6.1.4.1.2281.10.7.8.2.3.1.1
The location of the group
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsXPICStatusState 1.3.6.1.4.1.2281.10.7.8.2.3.1.2
The state of XPIC State Machine
Status: mandatory Access: read-only
OBJECT-TYPE    
  XpicState  

genEquipRadioGroupsMR 1.3.6.1.4.1.2281.10.7.8.3
OBJECT IDENTIFIER    

genEquipRadioGroupsMRAttrTable 1.3.6.1.4.1.2281.10.7.8.3.1
MR config table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsMRAttrEntry

genEquipRadioGroupsMRAttrEntry 1.3.6.1.4.1.2281.10.7.8.3.1.1
MR config table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsMRAttrEntry  

genEquipRadioGroupsMRAttrGroupIfIndex 1.3.6.1.4.1.2281.10.7.8.3.1.1.1
The location of the group
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMRAttrGroupId 1.3.6.1.4.1.2281.10.7.8.3.1.1.2
The Id of the radio MR group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

genEquipRadioGroupsMRAttrAdmin 1.3.6.1.4.1.2281.10.7.8.3.1.1.3
MR Admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsMRAttrBlockRadioIfindex 1.3.6.1.4.1.2281.10.7.8.3.1.1.4
Block Radio ifindex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMRAttrBlockRadioAdmin 1.3.6.1.4.1.2281.10.7.8.3.1.1.5
Block Radio Admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsMRAttrCopy2MateIfindex 1.3.6.1.4.1.2281.10.7.8.3.1.1.6
Copy2mate Radio ifindex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMRAttrCopy2MateAdmin 1.3.6.1.4.1.2281.10.7.8.3.1.1.7
Copy2Mate Admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsMRAttrExBerAdmin 1.3.6.1.4.1.2281.10.7.8.3.1.1.8
Excessive BER Admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsMRAttrMinNumRadio 1.3.6.1.4.1.2281.10.7.8.3.1.1.9
Minimal num of radios.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMRAttrMinProfileAdmin 1.3.6.1.4.1.2281.10.7.8.3.1.1.10
Min ACM profile admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsMRAttrSigDegardeAdmin 1.3.6.1.4.1.2281.10.7.8.3.1.1.11
Signal Degrade Admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsMRMembersTable 1.3.6.1.4.1.2281.10.7.8.3.2
MR members table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsMRMembersEntry

genEquipRadioGroupsMRMembersEntry 1.3.6.1.4.1.2281.10.7.8.3.2.1
MR members table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsMRMembersEntry  

genEquipRadioGroupsMRMembersIfIndexGroup 1.3.6.1.4.1.2281.10.7.8.3.2.1.1
The location of the radio MR group
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMRMembersMem1IfIndex 1.3.6.1.4.1.2281.10.7.8.3.2.1.2
The radio location of member 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMRMembersMem2IfIndex 1.3.6.1.4.1.2281.10.7.8.3.2.1.3
The radio location of member 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMRMembersRowStatus 1.3.6.1.4.1.2281.10.7.8.3.2.1.30
Row status to allow user add entries dynamically.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipRadioGroupsMRStatusTable 1.3.6.1.4.1.2281.10.7.8.3.3
MR Status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsMRStatusEntry

genEquipRadioGroupsMRStatusEntry 1.3.6.1.4.1.2281.10.7.8.3.3.1
MR Status table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsMRStatusEntry  

genEquipRadioGroupsMRStatusGroupIfIndex 1.3.6.1.4.1.2281.10.7.8.3.3.1.1
The location of the group
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMRStatusOpertionalState 1.3.6.1.4.1.2281.10.7.8.3.3.1.2
Operational State
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMRStatusRemoteOpertionalState 1.3.6.1.4.1.2281.10.7.8.3.3.1.3
Remote Operational State.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMIMO 1.3.6.1.4.1.2281.10.7.8.4
OBJECT IDENTIFIER    

genEquipRadioGroupsMIMOAttrTable 1.3.6.1.4.1.2281.10.7.8.4.1
The configuration table of the MIMO groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsMIMOAttrEntry

genEquipRadioGroupsMIMOAttrEntry 1.3.6.1.4.1.2281.10.7.8.4.1.1
The configuration table of the MIMO groups entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsMIMOAttrEntry  

genEquipRadioGroupsMIMOAttrGroupIfIndex 1.3.6.1.4.1.2281.10.7.8.4.1.1.1
MIMO configuration table index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMIMOAttrRole 1.3.6.1.4.1.2281.10.7.8.4.1.1.2
Role can be Master or Slave.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER slave(0), master(1), not-relevant(2)  

genEquipRadioGroupsMIMOAttrAdmin 1.3.6.1.4.1.2281.10.7.8.4.1.1.3
Administrating state of the MIMO group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsMIMOAttrResetStateMachine 1.3.6.1.4.1.2281.10.7.8.4.1.1.4
Reset MIMO state machine.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipRadioGroupsMIMOMembersTable 1.3.6.1.4.1.2281.10.7.8.4.2
The description the radio carrier members of the MIMO groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsMIMOMembersEntry

genEquipRadioGroupsMIMOMembersEntry 1.3.6.1.4.1.2281.10.7.8.4.2.1
The description the radio carrier members of the MIMO groups entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsMIMOMembersEntry  

genEquipRadioGroupsMIMOMembersGroupIfIndex 1.3.6.1.4.1.2281.10.7.8.4.2.1.1
MIMO members table index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMIMOMembersGroupType 1.3.6.1.4.1.2281.10.7.8.4.2.1.2
Type of MIMO group: 2x2 or 4x4 etc...
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mimo-2x2(0), mimo-4x4(1), base-band-combining-2x2(2), base-band-combining-4x4(3)  

genEquipRadioGroupsMIMOMembersMem1IfIndex 1.3.6.1.4.1.2281.10.7.8.4.2.1.3
The radio location of member 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMIMOMembersMem2IfIndex 1.3.6.1.4.1.2281.10.7.8.4.2.1.4
The radio location of member 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMIMOMembersMem3IfIndex 1.3.6.1.4.1.2281.10.7.8.4.2.1.5
The radio location of member 3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMIMOMembersMem4IfIndex 1.3.6.1.4.1.2281.10.7.8.4.2.1.6
The radio location of member 4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMIMOMembersRowStatus 1.3.6.1.4.1.2281.10.7.8.4.2.1.30
Row status to allow user add entries dynamically.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipRadioGroupsMIMOStatusTable 1.3.6.1.4.1.2281.10.7.8.4.3
The current status table of the MIMO groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsMIMOStatusEntry

genEquipRadioGroupsMIMOStatusEntry 1.3.6.1.4.1.2281.10.7.8.4.3.1
The current status table of the MIMO groups entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsMIMOStatusEntry  

genEquipRadioGroupsMIMOStatusGroupIfIndex 1.3.6.1.4.1.2281.10.7.8.4.3.1.1
MIMO status table index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMIMOStatusState 1.3.6.1.4.1.2281.10.7.8.4.3.1.2
MIMO-State
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER slave(0), init(1), disabled(2), idle(3), recovery(4), half-capacity(5)  

genEquipRadioGroupsMIMOStatus1stMMI 1.3.6.1.4.1.2281.10.7.8.4.3.1.3
MIMO interference in dB of the 1st carrier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMIMOStatus2ndMMI 1.3.6.1.4.1.2281.10.7.8.4.3.1.4
MIMO interference in dB of the 2nd carrier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMIMOStatus3rdMMI 1.3.6.1.4.1.2281.10.7.8.4.3.1.5
MIMO interference in dB of the 3rd carrier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMIMOStatus4thMMI 1.3.6.1.4.1.2281.10.7.8.4.3.1.6
MIMO interference in dB of the 4th carrier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsMIMOStatusAdvancedState 1.3.6.1.4.1.2281.10.7.8.4.3.1.7
MIMO advanced state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), initializing(1), init-retry(2), init-retry-checkup(3), init-retry-bringup(4), idle(5), unsuitable-hw(6), half-capacity(7), master-failure(8), remote-master-failure(9), remote-has-no-master(10), mute-slave(11), slave-init(12), slave-idle(13), slave-mutted(14), self-mute-comm-fail-to-master(15), half-capacity-no-master(16), half-capacity-master-failure(17)  

genEquipRadioGroupsAbc 1.3.6.1.4.1.2281.10.7.8.5
OBJECT IDENTIFIER    

genEquipRadioGroupsAbcAttrTable 1.3.6.1.4.1.2281.10.7.8.5.1
Multi Carrier ABC configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsAbcAttrEntry

genEquipRadioGroupsAbcAttrEntry 1.3.6.1.4.1.2281.10.7.8.5.1.1
Multi Carrier ABC configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsAbcAttrEntry  

genEquipRadioGroupsAbcAttrIfIndex 1.3.6.1.4.1.2281.10.7.8.5.1.1.1
The interface-index of the ABC group
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcAttrGroupName 1.3.6.1.4.1.2281.10.7.8.5.1.1.2
Textual description of the ABC group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipRadioGroupsAbcAttrAdminState 1.3.6.1.4.1.2281.10.7.8.5.1.1.3
The Administrative state of ABC radio group which decides if the Multi Carrier ABC group is enabled or disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsAbcAttrQnumberOfRadioMembers 1.3.6.1.4.1.2281.10.7.8.5.1.1.4
The number of radios that can be members of the Multi Carrier ABC group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcAttrProtectionEnable 1.3.6.1.4.1.2281.10.7.8.5.1.1.5
When Protection is Enabled protecion groups can be added to the Multi-carrier ABC group. When disabled regular channels can be attached.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsAbcAttrHighPriEthernetBandwidth 1.3.6.1.4.1.2281.10.7.8.5.1.1.6
Bandwidth reserved for high priority ethernet in Kbps. Values range from from 0 (i.e. No high pri ethernet) to max capacity (I.e. no STM-1s) in Kbps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcAttrQualityThreshold 1.3.6.1.4.1.2281.10.7.8.5.1.1.7
Members degrading below this threshold will be set to 'do not use' in the group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcAttrRowStatus 1.3.6.1.4.1.2281.10.7.8.5.1.1.30
This is the row status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipRadioGroupsAbcMembersTable 1.3.6.1.4.1.2281.10.7.8.5.2
Multi Carrier ABC members table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsAbcMembersEntry

genEquipRadioGroupsAbcMembersEntry 1.3.6.1.4.1.2281.10.7.8.5.2.1
Multi Carrier ABC members table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsAbcMembersEntry  

genEquipRadioGroupsAbcMembersGroupIfIndex 1.3.6.1.4.1.2281.10.7.8.5.2.1.1
Integer representing the group interface ifindex
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcMembersGroupId 1.3.6.1.4.1.2281.10.7.8.5.2.1.2
Integer representing the group interface ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcMembersChannel1MemberIfIndex 1.3.6.1.4.1.2281.10.7.8.5.2.1.3
IfIndex representing the group member connect to this ABC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcMembersChannel1adminState 1.3.6.1.4.1.2281.10.7.8.5.2.1.4
The Administrative state of an ABC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsAbcMembersChannel2MemberIfIndex 1.3.6.1.4.1.2281.10.7.8.5.2.1.5
IfIndex representing the group member connect to this ABC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcMembersChannel2adminState 1.3.6.1.4.1.2281.10.7.8.5.2.1.6
The Administrative state of an ABC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsAbcMembersChannel3MemberIfIndex 1.3.6.1.4.1.2281.10.7.8.5.2.1.7
IfIndex representing the group member connect to this ABC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcMembersChannel3adminState 1.3.6.1.4.1.2281.10.7.8.5.2.1.8
The Administrative state of an ABC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsAbcMembersChannel4MemberIfIndex 1.3.6.1.4.1.2281.10.7.8.5.2.1.9
IfIndex representing the group member connect to this ABC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcMembersChannel4adminState 1.3.6.1.4.1.2281.10.7.8.5.2.1.10
The Administrative state of an ABC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsAbcMembersChannel5MemberIfIndex 1.3.6.1.4.1.2281.10.7.8.5.2.1.11
IfIndex representing the group member connect to this ABC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcMembersChannel5adminState 1.3.6.1.4.1.2281.10.7.8.5.2.1.12
The Administrative state of an ABC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsAbcMembersChannel6MemberIfIndex 1.3.6.1.4.1.2281.10.7.8.5.2.1.13
IfIndex representing the group member connect to this ABC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcMembersChannel6adminState 1.3.6.1.4.1.2281.10.7.8.5.2.1.14
The Administrative state of an ABC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsAbcMembersChannel7MemberIfIndex 1.3.6.1.4.1.2281.10.7.8.5.2.1.15
IfIndex representing the group member connect to this ABC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcMembersChannel7adminState 1.3.6.1.4.1.2281.10.7.8.5.2.1.16
The Administrative state of an ABC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsAbcMembersChannel8MemberIfIndex 1.3.6.1.4.1.2281.10.7.8.5.2.1.17
IfIndex representing the group member connect to this ABC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcMembersChannel8adminState 1.3.6.1.4.1.2281.10.7.8.5.2.1.18
The Administrative state of an ABC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipRadioGroupsAbcStatusTable 1.3.6.1.4.1.2281.10.7.8.5.3
Multi Carrier ABC status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipRadioGroupsAbcStatusEntry

genEquipRadioGroupsAbcStatusEntry 1.3.6.1.4.1.2281.10.7.8.5.3.1
Multi Carrier ABC status table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipRadioGroupsAbcStatusEntry  

genEquipRadioGroupsAbcStatusIfIndex 1.3.6.1.4.1.2281.10.7.8.5.3.1.1
The interface-index of the ABC group
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcStatusOperState 1.3.6.1.4.1.2281.10.7.8.5.3.1.2
The operational state of the ABC group as a WAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipRadioGroupsAbcStatusRemoteOperState 1.3.6.1.4.1.2281.10.7.8.5.3.1.3
The remote ABC groups operational state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipRadioGroupsAbcStatusCurrentAggregatedCapacityRX 1.3.6.1.4.1.2281.10.7.8.5.3.1.4
The combined current RX throughput capacity of the ABC group in Kbps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcStatusCurrentAggregatedCapacityTX 1.3.6.1.4.1.2281.10.7.8.5.3.1.5
The combined current TX throughput capacity of the ABC group in Kbps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcStatusChannel1Operstate 1.3.6.1.4.1.2281.10.7.8.5.3.1.6
The operational state of the ABC channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipRadioGroupsAbcStatusChannel1Capacity 1.3.6.1.4.1.2281.10.7.8.5.3.1.7
The current throughput capacity of the ABC channel in Kbps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcStatusChannel2Operstate 1.3.6.1.4.1.2281.10.7.8.5.3.1.8
The operational state of the ABC channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipRadioGroupsAbcStatusChannel2Capacity 1.3.6.1.4.1.2281.10.7.8.5.3.1.9
The current throughput capacity of the ABC channel in Kbps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcStatusChannel3OperState 1.3.6.1.4.1.2281.10.7.8.5.3.1.10
The operational state of the ABC channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipRadioGroupsAbcStatusChannel3Capacity 1.3.6.1.4.1.2281.10.7.8.5.3.1.11
The current throughput capacity of the ABC channel in Kbps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcStatusChannel4OperState 1.3.6.1.4.1.2281.10.7.8.5.3.1.12
The operational state of the ABC channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipRadioGroupsAbcStatusChannel4Capacity 1.3.6.1.4.1.2281.10.7.8.5.3.1.13
The current throughput capacity of the ABC channel in Kbps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcStatusChannel5OperState 1.3.6.1.4.1.2281.10.7.8.5.3.1.14
The operational state of the ABC channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipRadioGroupsAbcStatusChannel5Capacity 1.3.6.1.4.1.2281.10.7.8.5.3.1.15
The current throughput capacity of the ABC channel in Kbps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcStatusChannel6OperState 1.3.6.1.4.1.2281.10.7.8.5.3.1.16
The operational state of the ABC channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipRadioGroupsAbcStatusChannel6Capacity 1.3.6.1.4.1.2281.10.7.8.5.3.1.17
The current throughput capacity of the ABC channel in Kbps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcStatusChannel7OperState 1.3.6.1.4.1.2281.10.7.8.5.3.1.18
The operational state of the ABC channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipRadioGroupsAbcStatusChannel7Capacity 1.3.6.1.4.1.2281.10.7.8.5.3.1.19
The current throughput capacity of the ABC channel in Kbps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipRadioGroupsAbcStatusChannel8OperState 1.3.6.1.4.1.2281.10.7.8.5.3.1.20
The operational state of the ABC channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipRadioGroupsAbcStatusChannel8Capacity 1.3.6.1.4.1.2281.10.7.8.5.3.1.21
The current throughput capacity of the ABC channel in Kbps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipStm1AbcAttrTable 1.3.6.1.4.1.2281.10.7.8.5.5
Multi Carrier ABC stm1 table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipStm1AbcAttrEntry

genEquipStm1AbcAttrEntry 1.3.6.1.4.1.2281.10.7.8.5.5.1
Multi Carrier ABC stm1 table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipStm1AbcAttrEntry  

genEquipStm1AbcAttrIfIndex 1.3.6.1.4.1.2281.10.7.8.5.5.1.1
The interface-index of the ABC group
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipStm1AbcAttrGroupId 1.3.6.1.4.1.2281.10.7.8.5.5.1.2
Integer representing the group interface ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipStm1AbcAttrNumberOfMembers 1.3.6.1.4.1.2281.10.7.8.5.5.1.3
The number of STM-1/OC-3 channels that can be members of the Multi Carrier ABC group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipStm1AbcAttrPri1IfIndex 1.3.6.1.4.1.2281.10.7.8.5.5.1.4
Location of the highest priority STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipStm1AbcAttrPri2IfIndex 1.3.6.1.4.1.2281.10.7.8.5.5.1.5
Location of the highest priority STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipStm1AbcAttrPri3IfIndex 1.3.6.1.4.1.2281.10.7.8.5.5.1.6
Location of the highest priority STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipStm1AbcAttrPri4IfIndex 1.3.6.1.4.1.2281.10.7.8.5.5.1.7
Location of the highest priority STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor