MWR-RADIO-MC-MIB

File: MWR-RADIO-MC-MIB.mib (19825 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC DWI-HARMONY-PRIVATE-MIB
EQUIPMENT-COMMON-MIB MWR-ETHERNET-MIB

Imported symbols

MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
Counter32 Counter64 Integer32
DisplayString mwr equipmentTrapInfo
equipmentOutTrapsCounter equipmentAlarmActiveConditionId EnableType
mwrEventConfigSeverity RadioInstanceType

Defined Types

MwrEmcRadioConfigurationsEntry  
SEQUENCE    
  mwrEmcRadioConfigIndex RadioInstanceType
  mwrEmcRadioTxState EnableType
  mwrEmcRadioTxPower Integer32
  mwrEmcRadioTxDownTime Integer32
  mwrEmcRadioRxFrequency Integer32
  mwrEmcRadioTxFrequency Integer32

MwrEmcRadioProfileEntry  
SEQUENCE    
  mwrEmcRadioStandardMode DisplayString
  mwrEmcRadioChannelBw DisplayString
  mwrEmcRadioStaticTxProfile DisplayString
  mwrEmcRadioProgrammedProfile EnableType

MwrEmcRadioThresholdAlarmEntry  
SEQUENCE    
  mwrEmcRadioThresholdIndex RadioInstanceType
  mwrEmcRadioRslBelowThresholdParams DisplayString
  mwrEmcRadioTxAboveThresholdParams DisplayString

MwrEmcRadioStatusEntry  
SEQUENCE    
  mwrEmcRadioStatusIndex RadioInstanceType
  mwrEmcRadioOperStatus INTEGER
  mwrEmcRadioTRSpacing Integer32
  mwrEmcRadioActualTxStatus EnableType
  mwrEmcRadioRxFreqMin Integer32
  mwrEmcRadioRxFreqMax Integer32
  mwrEmcRadioTxFreqMin Integer32
  mwrEmcRadioTxFreqMax Integer32
  mwrEmcRadioTxPowerMin Integer32
  mwrEmcRadioTxPowerMax Integer32
  mwrEmcRadioLinkStatus INTEGER

MwrEmcRadioPerfStatsEntry  
SEQUENCE    
  mwrEmcRadioStatsIndex RadioInstanceType
  mwrEmcRadioTxFrames Counter64
  mwrEmcRadioRxGoodFrames Counter64
  mwrEmcRadioRxErrsFrames Counter64
  mwrEmcRadioRSL Integer32
  mwrEmcRadioEqualizerStress Integer32
  mwrEmcRadioSNR Integer32
  mwrEmcRadioLinkAvailability Counter32
  mwrEmcRadioActualTxPower Integer32
  mwrEmcRadioActualTxProfile DisplayString

MwrEmcRadioPerfStats32BitEntry  
SEQUENCE    
  mwrEmcRadioStats32BitIndex RadioInstanceType
  mwrEmcRadioTxFrames32Bit Counter32
  mwrEmcRadioRxGoodFrames32Bit Counter32
  mwrEmcRadioRxErrsFrames32Bit Counter32

Defined Values

mwrRadioMcModIdentity 1.3.6.1.4.1.7262.4.5.1003
This specifies the contact information and the revision tracking information for the MIB module version.
MODULE-IDENTITY    

mwrRadio 1.3.6.1.4.1.7262.4.5.12
OBJECT IDENTIFIER    

mwrEmcRadioConfigurations 1.3.6.1.4.1.7262.4.5.12.201
OBJECT IDENTIFIER    

mwrEmcRadioStatus 1.3.6.1.4.1.7262.4.5.12.202
OBJECT IDENTIFIER    

mwrEmcRadioPerformance 1.3.6.1.4.1.7262.4.5.12.203
OBJECT IDENTIFIER    

mwrEmcRadioNotifications 1.3.6.1.4.1.7262.4.5.12.204
OBJECT IDENTIFIER    

mwrEmcRadioConfigurationsTable 1.3.6.1.4.1.7262.4.5.12.201.1
Table containing radio configurations.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrEmcRadioConfigurationsEntry

mwrEmcRadioConfigurationsEntry 1.3.6.1.4.1.7262.4.5.12.201.1.1
Table entry containing radio channel configurations.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrEmcRadioConfigurationsEntry  

mwrEmcRadioConfigIndex 1.3.6.1.4.1.7262.4.5.12.201.1.1.1
A unique value for each radio channel if applicable.
Status: current Access: not-accessible
OBJECT-TYPE    
  RadioInstanceType  

mwrEmcRadioTxState 1.3.6.1.4.1.7262.4.5.12.201.1.1.2
Represents the transmit state of the radio channel.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrEmcRadioTxPower 1.3.6.1.4.1.7262.4.5.12.201.1.1.3
This defines the programmed transmit level of the radio channel. The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dB. Notes: - Programmed and Actual transmit power may differ - see mwrEmcRadioActualTxPower.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrEmcRadioTxDownTime 1.3.6.1.4.1.7262.4.5.12.201.1.1.4
The amount of time in seconds the radio transmitter is disabled when the mwrEmcRadioTxState is turned off. - Make sure this is set before the mwrEmcRadioTxState is disabled. - If the down time is set to 0, the radio will stay disabled until it is re-enabled again.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrEmcRadioRxFrequency 1.3.6.1.4.1.7262.4.5.12.201.1.1.5
Represents the receive Radio frequency in kHz.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrEmcRadioTxFrequency 1.3.6.1.4.1.7262.4.5.12.201.1.1.6
Represents the transmit Radio frequency in kHz.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrEmcRadioProfileTable 1.3.6.1.4.1.7262.4.5.12.201.2
Table containing the radio profile configurations.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrEmcRadioProfileEntry

mwrEmcRadioProfileEntry 1.3.6.1.4.1.7262.4.5.12.201.2.1
Table entry containing the radio profile configurations.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrEmcRadioProfileEntry  

mwrEmcRadioStandardMode 1.3.6.1.4.1.7262.4.5.12.201.2.1.1
An index representing the available standard mode of the radio channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

mwrEmcRadioChannelBw 1.3.6.1.4.1.7262.4.5.12.201.2.1.2
An index representing the available channel bandwidth of the radio channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

mwrEmcRadioStaticTxProfile 1.3.6.1.4.1.7262.4.5.12.201.2.1.3
An index representing the available static tx profile of the radio channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

mwrEmcRadioProgrammedProfile 1.3.6.1.4.1.7262.4.5.12.201.2.1.4
Represents the configured standard mode, channel BW and the TX profile of the radio channel.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrEmcRadioThresholdAlarmTable 1.3.6.1.4.1.7262.4.5.12.201.3
Table containing the threshold alarm configurations of the radio channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrEmcRadioThresholdAlarmEntry

mwrEmcRadioThresholdAlarmEntry 1.3.6.1.4.1.7262.4.5.12.201.3.1
Table entry containing the threshold alarm configurations of the radio channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrEmcRadioThresholdAlarmEntry  

mwrEmcRadioThresholdIndex 1.3.6.1.4.1.7262.4.5.12.201.3.1.1
A unique value for each radio channel if applicable.
Status: current Access: not-accessible
OBJECT-TYPE    
  RadioInstanceType  

mwrEmcRadioRslBelowThresholdParams 1.3.6.1.4.1.7262.4.5.12.201.3.1.2
Represents the RSL threshold in dB and the number of seconds the RSL should be below the threshold. An example of the format of the string is as follows: '-75 10'. The first parameter power level in dB, the second is the time in seconds. In this example the threshold -75 dB and the time is set to 10 seconds. The single quote marks are not used in the command.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mwrEmcRadioTxAboveThresholdParams 1.3.6.1.4.1.7262.4.5.12.201.3.1.3
Represents the radio transmit power threshold in dB and the number of seconds threshold must be exceeded. An example of the format of the string is as follows: '-75 10'. The first parameter power level in dB, the second is the time in seconds. In this example the threshold -75 dB and the time is set to 10 seconds. The single quote marks are not used in the command.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mwrEmcRadioChCfgSynchEnable 1.3.6.1.4.1.7262.4.5.12.201.4
This object enables or disables synchronization of the radio configuration on multiple carriers.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrEmcRadioStatusTable 1.3.6.1.4.1.7262.4.5.12.202.1
Table containing the status of the radio channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrEmcRadioStatusEntry

mwrEmcRadioStatusEntry 1.3.6.1.4.1.7262.4.5.12.202.1.1
Table entry containing the status of the radio channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrEmcRadioStatusEntry  

mwrEmcRadioStatusIndex 1.3.6.1.4.1.7262.4.5.12.202.1.1.1
A unique value for each radio channel if applicable.
Status: current Access: read-only
OBJECT-TYPE    
  RadioInstanceType  

mwrEmcRadioOperStatus 1.3.6.1.4.1.7262.4.5.12.202.1.1.2
The current operational state of the Radio. When radio is fully configured and ready to operate the status will be up.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mwrEmcRadioTRSpacing 1.3.6.1.4.1.7262.4.5.12.202.1.1.3
Represents the difference between the configured TX/RX center frequency of the radio channel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrEmcRadioActualTxStatus 1.3.6.1.4.1.7262.4.5.12.202.1.1.4
This object defines the actual transmit state of the radio channel.
Status: current Access: read-only
OBJECT-TYPE    
  EnableType  

mwrEmcRadioRxFreqMin 1.3.6.1.4.1.7262.4.5.12.202.1.1.5
Represents the minimum radio RX frequency allowed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrEmcRadioRxFreqMax 1.3.6.1.4.1.7262.4.5.12.202.1.1.6
Represents the maximum radio RX frequency allowed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrEmcRadioTxFreqMin 1.3.6.1.4.1.7262.4.5.12.202.1.1.7
Represents the minimum radio TX frequency allowed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrEmcRadioTxFreqMax 1.3.6.1.4.1.7262.4.5.12.202.1.1.8
Represents the maximum radio TX frequency allowed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrEmcRadioTxPowerMin 1.3.6.1.4.1.7262.4.5.12.202.1.1.9
Represents the minimum radio Transmit Power allowed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrEmcRadioTxPowerMax 1.3.6.1.4.1.7262.4.5.12.202.1.1.10
Represents the maximum radio Transmit Power allowed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrEmcRadioLinkStatus 1.3.6.1.4.1.7262.4.5.12.202.1.1.11
The current operational status of the radio link.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mwrEmcRadioPerfStatsTable 1.3.6.1.4.1.7262.4.5.12.203.1
Table containing the performance of the radio channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrEmcRadioPerfStatsEntry

mwrEmcRadioPerfStatsEntry 1.3.6.1.4.1.7262.4.5.12.203.1.1
Table entry containing the performance of the radio channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrEmcRadioPerfStatsEntry  

mwrEmcRadioStatsIndex 1.3.6.1.4.1.7262.4.5.12.203.1.1.1
A unique value for each radio channel if applicable.
Status: current Access: not-accessible
OBJECT-TYPE    
  RadioInstanceType  

mwrEmcRadioTxFrames 1.3.6.1.4.1.7262.4.5.12.203.1.1.2
The current count of radio frames transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mwrEmcRadioRxGoodFrames 1.3.6.1.4.1.7262.4.5.12.203.1.1.3
The current count of good radio frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mwrEmcRadioRxErrsFrames 1.3.6.1.4.1.7262.4.5.12.203.1.1.4
The current count of radio frames received in error.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mwrEmcRadioRSL 1.3.6.1.4.1.7262.4.5.12.203.1.1.5
An estimate of the radio RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dB. For example -352 is actually -35.2dB
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrEmcRadioEqualizerStress 1.3.6.1.4.1.7262.4.5.12.203.1.1.6
Indicates the average magnitude of all the equalizer taps to provide a measure of how hard the equalizer is working.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrEmcRadioSNR 1.3.6.1.4.1.7262.4.5.12.203.1.1.7
The absolute value of the estimate of the radio SNR. Divide the value by 10 to get the actual SNR.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrEmcRadioLinkAvailability 1.3.6.1.4.1.7262.4.5.12.203.1.1.8
The amount of time the radio link is up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mwrEmcRadioActualTxPower 1.3.6.1.4.1.7262.4.5.12.203.1.1.9
This object indicates the running configuration for tx power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrEmcRadioActualTxProfile 1.3.6.1.4.1.7262.4.5.12.203.1.1.10
A read-only string specifying the actual value for the TX profile.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrEmcRadioPerfStats32BitTable 1.3.6.1.4.1.7262.4.5.12.203.2
Table containing 32-bit counters of the radio channel. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrEmcRadioPerfStats32BitEntry

mwrEmcRadioPerfStats32BitEntry 1.3.6.1.4.1.7262.4.5.12.203.2.1
Table entry containing 32-bit counters of the radio channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrEmcRadioPerfStats32BitEntry  

mwrEmcRadioStats32BitIndex 1.3.6.1.4.1.7262.4.5.12.203.2.1.1
A unique value for each radio channel if applicable.
Status: current Access: not-accessible
OBJECT-TYPE    
  RadioInstanceType  

mwrEmcRadioTxFrames32Bit 1.3.6.1.4.1.7262.4.5.12.203.2.1.2
A low capacity 32-bit counter representing the current count of radio frames transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mwrEmcRadioRxGoodFrames32Bit 1.3.6.1.4.1.7262.4.5.12.203.2.1.3
A low capacity 32-bit counter representing the current count of radio frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mwrEmcRadioRxErrsFrames32Bit 1.3.6.1.4.1.7262.4.5.12.203.2.1.4
A low capacity 32-bit counter representing the current count of radio frames received in error.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mwrEmcRadioRxLossOfSync 1.3.6.1.4.1.7262.4.5.12.204.1
This notification is raised when radio link loses synchronization on its receiver. The mwrEmcRadioStatusIndex indicates each radio channel.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrEmcRadioFailure 1.3.6.1.4.1.7262.4.5.12.204.2
This notification is raised when fault is detected in radio. The reason could be faulty components or invalid configuration. The mwrEmcRadioStatusIndex indicates each radio channel.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrEmcRadioCalUnavailable 1.3.6.1.4.1.7262.4.5.12.204.3
This notification is raised when the calibration information is not available in the system.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrEmcRadioRslBelowThreshold 1.3.6.1.4.1.7262.4.5.12.204.4
This notification is raised when the receive signal level of the radio link is below the user configured limit. The mwrEmcRadioStatusIndex indicates each radio channel.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrEmcRadioTxlAboveThreshold 1.3.6.1.4.1.7262.4.5.12.204.5
This notification is raised when the radio transmit power level exceeds the user set limit. The mwrEmcRadioStatusIndex indicates each radio channel.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrEmcRadioConfigMismatch 1.3.6.1.4.1.7262.4.5.12.204.6
This notification is raised when the radio configuration between the peers is mismatched.
Status: current Access: read-only
NOTIFICATION-TYPE