MWR-ETHERNET-MIB

File: MWR-ETHERNET-MIB.mib (158752 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC DWI-HARMONY-PRIVATE-MIB
EQUIPMENT-COMMON-MIB INET-ADDRESS-MIB

Imported symbols

MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
Unsigned32 Counter32 Counter64
IpAddress Integer32 TEXTUAL-CONVENTION
TruthValue RowStatus DateAndTime
DisplayString mwr equipmentTrapInfo
equipmentOutTrapsCounter equipmentAlarmActiveConditionId EnableType
InetAddress InetAddressType

Defined Types

ClassType  
The Qos class numbers from 1 to 13.
TEXTUAL-CONVENTION    
  INTEGER c1(1), c2(2), c3(3), c4(4), c5(5), c6(6), c7(7), c8(8), c9(9), c10(10), c11(11), c12(12), c13(13)  

FlowType  
The Qos flow numbers from 1 to 13.
TEXTUAL-CONVENTION    
  INTEGER flow1(1), flow2(2), flow3(3), flow4(4), flow5(5), flow6(6), flow7(7), flow8(8), flow9(9), flow10(10), flow11(11), flow12(12), flow13(13)  

PMIntervalType  
The available interval period for statistical counters.
TEXTUAL-CONVENTION    
  INTEGER quarter(1), day(2)  

PortType  
The list of system Ethernet ports
TEXTUAL-CONVENTION    
  INTEGER gi01(1), gi02(2), gi03(3), gi04(4)  

QueueType  
The queue numbers from 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
TEXTUAL-CONVENTION    
  INTEGER q1(1), q2(2), q3(3), q4(4), q5(5), q6(6), q7(7), q8(8)  

RadioInstanceType  
The radio instance type.
TEXTUAL-CONVENTION    
  INTEGER radio1(1)  

MwrSwInventoryEntry  
SEQUENCE    
  mwrSwInvBank INTEGER
  mwrSwInvStatus INTEGER
  mwrSwInvOmniRelease DisplayString
  mwrSwInvTargetConfFileVersion DisplayString
  mwrSwInvMibVersion DisplayString
  mwrSwInvSecurityVersion DisplayString

MwrLicenseFeaturesEntry  
SEQUENCE    
  mwrLicenseFeatureIndex Integer32
  mwrLicenseFeatureId Integer32
  mwrLicenseFeature DisplayString
  mwrLicenseFeatureStatus INTEGER

MwrSntpServerEntry  
SEQUENCE    
  mwrSntpServerIndex Integer32
  mwrSntpServerDomain InetAddressType
  mwrSntpServerAddress InetAddress
  mwrSntpServerStatus INTEGER
  mwrSntpServerStratum Integer32

MwrRadiusServerEntry  
SEQUENCE    
  mwrRadiusServerIndex Integer32
  mwrRadiusCfgdHostDomain InetAddressType
  mwrRadiusCfgdHostAddress InetAddress
  mwrRadiusCfgdHostKey DisplayString

MwrIpv4Entry  
SEQUENCE    
  mwrIpv4Index Integer32
  mwrIpv4Address IpAddress
  mwrIpv4SubnetMask IpAddress
  mwrIpv4DefaultGateway IpAddress
  mwrIpv4RowStatus RowStatus

MwrIpv6Entry  
SEQUENCE    
  mwrIpv6Index Integer32
  mwrIpv6Domain InetAddressType
  mwrIpv6Address InetAddress
  mwrIpv6Prefix Integer32
  mwrIpv6GatewayDomain InetAddressType
  mwrIpv6GatewayAddress InetAddress
  mwrIpv6RowStatus RowStatus

MwrFileXfrEntry  
SEQUENCE    
  mwrFileXfrSeqID Integer32
  mwrFileXfrIdentifier INTEGER
  mwrFileXfrName DisplayString
  mwrFileXfrMode INTEGER
  mwrFileXfrServerDomain InetAddressType
  mwrFileXfrServerAddress InetAddress
  mwrFileXfrClientDirection INTEGER
  mwrFileXfrUserName DisplayString
  mwrFileXfrPassword DisplayString
  mwrFileXfrNumEntries Integer32
  mwrFileXfrStatus INTEGER
  mwrFileXfrRowStatus RowStatus

MwrNetMgmtInterfaceEntry  
SEQUENCE    
  mwrNetMgmtInterfaceIndex Integer32
  mwrNetMgmtVlanId Integer32
  mwrNetMgmtInterface1 EnableType
  mwrNetMgmtInterface1Mode INTEGER
  mwrNetMgmtInterface1Tagged INTEGER
  mwrNetMgmtInterface2 EnableType
  mwrNetMgmtInterface2Mode INTEGER
  mwrNetMgmtInterface2Tagged INTEGER
  mwrNetMgmtInterface3 EnableType
  mwrNetMgmtInterface3Mode INTEGER
  mwrNetMgmtInterface3Tagged INTEGER
  mwrNetMgmtInterface4 EnableType
  mwrNetMgmtInterface4Mode INTEGER
  mwrNetMgmtInterface4Tagged INTEGER
  mwrNetMgmtInterfaceRowStatus RowStatus

MwrCosEntry  
SEQUENCE    
  mwrCosIndex INTEGER
  mwrCos0 QueueType
  mwrCos1 QueueType
  mwrCos2 QueueType
  mwrCos3 QueueType
  mwrCos4 QueueType
  mwrCos5 QueueType
  mwrCos6 QueueType
  mwrCos7 QueueType
  mwrCosRowStatus RowStatus

MwrCosDefValueEntry  
SEQUENCE    
  mwrCosDefValueIndex INTEGER
  mwrCosDefValue Integer32

MwrCirQEntry  
SEQUENCE    
  mwrCirQIndex QueueType
  mwrCirQ1 Integer32
  mwrCirQ2 Integer32
  mwrCirQ3 Integer32
  mwrCirQ4 Integer32
  mwrCirQ5 Integer32
  mwrCirQ6 Integer32
  mwrCirQ7 Integer32
  mwrCirQ8 Integer32
  mwrCirQRowStatus RowStatus

MwrCbsQEntry  
SEQUENCE    
  mwrCbsQIndex QueueType
  mwrCbsQ1 Integer32
  mwrCbsQ2 Integer32
  mwrCbsQ3 Integer32
  mwrCbsQ4 Integer32
  mwrCbsQ5 Integer32
  mwrCbsQ6 Integer32
  mwrCbsQ7 Integer32
  mwrCbsQ8 Integer32
  mwrCbsQRowStatus RowStatus

MwrWeightQEntry  
SEQUENCE    
  mwrWeightQIndex QueueType
  mwrWeightQ1 Integer32
  mwrWeightQ2 Integer32
  mwrWeightQ3 Integer32
  mwrWeightQ4 Integer32
  mwrWeightQ5 Integer32
  mwrWeightQ6 Integer32
  mwrWeightQ7 Integer32
  mwrWeightQ8 Integer32
  mwrWeightQRowStatus RowStatus

MwrQbsQEntry  
SEQUENCE    
  mwrQbsQIndex QueueType
  mwrQbsQ1 Integer32
  mwrQbsQ2 Integer32
  mwrQbsQ3 Integer32
  mwrQbsQ4 Integer32
  mwrQbsQ5 Integer32
  mwrQbsQ6 Integer32
  mwrQbsQ7 Integer32
  mwrQbsQ8 Integer32
  mwrQbsQRowStatus RowStatus

MwrPolicyQEntry  
SEQUENCE    
  mwrPolicyQIndex QueueType
  mwrPolicyQ1 INTEGER
  mwrPolicyQ2 INTEGER
  mwrPolicyQ3 INTEGER
  mwrPolicyQ4 INTEGER
  mwrPolicyQ5 INTEGER
  mwrPolicyQ6 INTEGER
  mwrPolicyQ7 INTEGER
  mwrPolicyQ8 INTEGER
  mwrPolicyQRowStatus RowStatus

MwrUserClassEntry  
SEQUENCE    
  mwrUserClassIndex ClassType
  mwrUserClassOffset Integer32
  mwrUserClassValue DisplayString
  mwrUserClassMask DisplayString

MwrUserFlowEntry  
SEQUENCE    
  mwrUserFlowIndex FlowType
  mwrUserFlowFilter DisplayString

MwrUserFlowMappingEntry  
SEQUENCE    
  mwrUserFlowMappingIndex FlowType
  mwrUserFlowMappingState EnableType
  mwrUserFlowMapping1Q QueueType
  mwrUserFlowMapping2Q QueueType
  mwrUserFlowMapping3Q QueueType
  mwrUserFlowMapping4Q QueueType
  mwrUserFlowMappingRowStatus RowStatus

MwrUserFlowMappingBridgeModeEntry  
SEQUENCE    
  mwrUserFlowMappingBridgeModeIndex FlowType
  mwrUserFlowMappingBridgeModeState EnableType
  mwrUserFlowMappingBridgeModeQ QueueType
  mwrUserFlowMappingBridgeModeRowStatus RowStatus

MwrPortThresholdAlarmEntry  
SEQUENCE    
  mwrPortThresholdAlarmIndex Integer32
  mwrDroppedPktsThresholdParams DisplayString
  mwrOutBWUtilizationThresholdParams DisplayString
  mwrThroughputThresholdParams DisplayString

MwrRadioQThresholdAlarmEntry  
SEQUENCE    
  mwrRadioQThresholdAlarmIndex QueueType
  mwrRadioQDepthThresholdParams DisplayString
  mwrRadioQDroppedPktsThresholdParams DisplayString

MwrEnetPerfPortStatsEntry  
SEQUENCE    
  mwrEnetPortStatsIndex INTEGER
  mwrPortStatsInOctet Counter64
  mwrPortStatsInGoodPkts Counter64
  mwrPortStatsInErrPkts Counter64
  mwrPortStatsInDiscardPkts Counter64
  mwrPortStatsOutOctets Counter64
  mwrPortStatsOutGoodPkts Counter64
  mwrPortStatsOutErrPkts Counter64
  mwrPortStatsOutDiscardPkts Counter64
  mwrPortStatsOutBwUtilization Integer32
  mwrPortStatsInBwUtilization Integer32
  mwrPortStatsInDataRate Integer32
  mwrPortStatsThroughput Integer32

MwrEnetPerfPortStats32BitEntry  
SEQUENCE    
  mwrPortStats32BitIndex INTEGER
  mwrPortStatsInOctet32Bit Counter32
  mwrPortStatsInGoodPkts32Bit Counter32
  mwrPortStatsInErrPkts32Bit Counter32
  mwrPortStatsInDiscardPkts32Bit Counter32
  mwrPortStatsOutOctets32Bit Counter32
  mwrPortStatsOutGoodPkts32Bit Counter32
  mwrPortStatsOutErrPkts32Bit Counter32
  mwrPortStatsOutDiscardPkts32Bit Counter32

MwrEnetPerfRadioQStatsEntry  
SEQUENCE    
  mwrRadioQStatsIndex QueueType
  mwrRadioQStatsInGoodPkts Counter64
  mwrRadioQStatsInDiscardPkts Counter64
  mwrRadioQStatsOutBwUtilization Integer32
  mwrRadioQStatsInDataRate Integer32
  mwrRadioQStatsThroughput Integer32

MwrEnetPerfRadioQStats32BitEntry  
SEQUENCE    
  mwrRadioQStats32BitIndex QueueType
  mwrRadioQStatsInGoodPkts32Bit Counter32
  mwrRadioQStatsDiscardPkts32Bit Counter32

MwrAcmModeEntry  
SEQUENCE    
  mwrAcmModeIndex Integer32
  mwrAcmTxProfileName DisplayString
  mwrAcmTxProfileRange INTEGER

MwrAcmStatusEntry  
SEQUENCE    
  mwrAcmStatusIndex RadioInstanceType
  mwrAcmActualTxProfile DisplayString

MwrAcmDiagEntry  
SEQUENCE    
  mwrAcmDiagIndex RadioInstanceType
  mwrAcmDiagnose INTEGER
  mwrAcmDiagnosticResult DisplayString

MwrAtpcConfigurationsEntry  
SEQUENCE    
  mwrAtpcConfigIndex RadioInstanceType
  mwrAtpcState EnableType
  mwrAtpcCoordinatedPower Integer32
  mwrAtpcCoordinatedPowerEnable EnableType
  mwrAtpcMinTxPower Integer32
  mwrAtpcMaxTxPower Integer32
  mwrAtpcRslTarget Integer32
  mwrAtpcRslTargetUseDefault EnableType

MwrAtpcStatusEntry  
SEQUENCE    
  mwrAtpcStatusIndex RadioInstanceType
  mwrAtpcRunningStatus INTEGER
  mwrAtpcDefaultRslTarget Integer32
  mwrAtpcActualMinTxPower Integer32
  mwrAtpcActualMaxTxPower Integer32
  mwrAtpcActualCoordinatedPower Integer32
  mwrAtpcPeerRslTarget Integer32
  mwrAtpcMinRslTarget Integer32
  mwrAtpcMaxRslTarget Integer32
  mwrAtpcPeerRsl Integer32

MwrBacEntry  
SEQUENCE    
  mwrBacQIndex QueueType
  mwrBacQEnable EnableType
  mwrBacQBlockSize Integer32
  mwrBacRecordLogging EnableType

MwrHcQEntry  
SEQUENCE    
  mwrHcQIndex QueueType
  mwrHcQ1 EnableType
  mwrHcQ2 EnableType
  mwrHcQ3 EnableType
  mwrHcQ4 EnableType
  mwrHcQ5 EnableType
  mwrHcQ6 EnableType
  mwrHcQ7 EnableType
  mwrHcQ8 EnableType
  mwrHcQRowStatus RowStatus

MwrBacStatusEntry  
SEQUENCE    
  mwrBacStatusQIndex QueueType
  mwrBacUncompressedRatio DisplayString
  mwrBacGain DisplayString

MwrEventConfigEntry  
SEQUENCE    
  mwrEventConfigIndex Unsigned32
  mwrEventInstanceIndex Unsigned32
  mwrEventConfigSeverity INTEGER
  mwrEventName DisplayString
  mwrAlarmConfigState EnableType
  mwrTrapConfigState EnableType
  mwrLogEventState EnableType

MwrSysLogServerEntry  
SEQUENCE    
  mwrSysLogServerIndex Integer32
  mwrSysLogEnable EnableType
  mwrSysLogHostDomain InetAddressType
  mwrSysLogHostAddress InetAddress

MwrPmRspiThresholdEntry  
SEQUENCE    
  mwrPmRspiThrIndex RadioInstanceType
  mwrPmRLT1 Integer32
  mwrPmRLT2 Integer32
  mwrPmRLT3 Integer32
  mwrPmRLT4 Integer32
  mwrPmTLT1 Integer32
  mwrPmTLT2 Integer32
  mwrPmRspiThrRowStatus RowStatus

MwrPmBwThresholdEntry  
SEQUENCE    
  mwrPmBWThrIndex Integer32
  mwrPmBWT1 Integer32
  mwrPmBWT2 Integer32
  mwrPmBWT3 Integer32
  mwrPmBWT4 Integer32
  mwrPmBWT5 Integer32
  mwrPmBWT6 Integer32
  mwrPmBWT7 Integer32
  mwrPmBWT8 Integer32
  mwrPmBWT9 Integer32
  mwrPmBWT10 Integer32
  mwrPmBWTRowStatus RowStatus

MwrPmTpThresholdEntry  
SEQUENCE    
  mwrPmTPThrIndex Integer32
  mwrPmTPT1 Integer32
  mwrPmTPT2 Integer32
  mwrPmTPT3 Integer32
  mwrPmTPT4 Integer32
  mwrPmTPT5 Integer32
  mwrPmTPT6 Integer32
  mwrPmTPT7 Integer32
  mwrPmTPT8 Integer32
  mwrPmTPT9 Integer32
  mwrPmTPT10 Integer32
  mwrPmTPTRowStatus RowStatus

MwrPmAdvThresholdEntry  
SEQUENCE    
  mwrPmAdvThrIndex Integer32
  mwrPmAdvTxHitsT1 Integer32
  mwrPmAdvRxHitsT1 Integer32
  mwrPmAdvRowStatus RowStatus

MwrPmRspiEntry  
SEQUENCE    
  mwrPmRspiStatusIndex RadioInstanceType
  mwrPmRspiInterval PMIntervalType
  mwrPmRspiIntervalID Integer32
  mwrPmRspiMeasSuspect TruthValue
  mwrPmRspiMeasIntervalStatus INTEGER
  mwrPmRspiMeasTimeLength Integer32
  mwrPmRspiMeasTLTMMin Integer32
  mwrPmRspiMeasTLTMMax Integer32
  mwrPmRspiMeasTLTS1 Integer32
  mwrPmRspiMeasTLTS2 Integer32
  mwrPmRspiMeasRLTMMin Integer32
  mwrPmRspiMeasRLTMMax Integer32
  mwrPmRspiMeasRLTS1 Integer32
  mwrPmRspiMeasRLTS2 Integer32
  mwrPmRspiMeasRLTS3 Integer32
  mwrPmRspiMeasRLTS4 Integer32

MwrPmBWEntry  
SEQUENCE    
  mwrPmBWStatusIndex Integer32
  mwrPmBWInterval PMIntervalType
  mwrPmBWIntervalID Integer32
  mwrPmBWMeasSuspect TruthValue
  mwrPmBWMeasIntervalStatus INTEGER
  mwrPmBWMeasTimeLength Integer32
  mwrPmMeasBWTS1 Integer32
  mwrPmMeasBWTS2 Integer32
  mwrPmMeasBWTS3 Integer32
  mwrPmMeasBWTS4 Integer32
  mwrPmMeasBWTS5 Integer32
  mwrPmMeasBWTS6 Integer32
  mwrPmMeasBWTS7 Integer32
  mwrPmMeasBWTS8 Integer32
  mwrPmMeasBWTS9 Integer32
  mwrPmMeasBWTS10 Integer32

MwrPmTPEntry  
SEQUENCE    
  mwrPmTPStatusIndex Integer32
  mwrPmTPInterval PMIntervalType
  mwrPmTPIntervalID Integer32
  mwrPmTPMeasSuspect TruthValue
  mwrPmTPMeasIntervalStatus INTEGER
  mwrPmTPMeasTimeLength Integer32
  mwrPmMeasTPTS1 Integer32
  mwrPmMeasTPTS2 Integer32
  mwrPmMeasTPTS3 Integer32
  mwrPmMeasTPTS4 Integer32
  mwrPmMeasTPTS5 Integer32
  mwrPmMeasTPTS6 Integer32
  mwrPmMeasTPTS7 Integer32
  mwrPmMeasTPTS8 Integer32
  mwrPmMeasTPTS9 Integer32
  mwrPmMeasTPTS10 Integer32

MwrPmAdvEntry  
SEQUENCE    
  mwrPmAdvStatusIndex Integer32
  mwrPmAdvInterval PMIntervalType
  mwrPmAdvIntervalID Integer32
  mwrPmAdvMeasSuspect TruthValue
  mwrPmAdvMeasIntervalStatus INTEGER
  mwrPmAdvMeasTimeLength Integer32
  mwrPmAdvTxCapPeak Integer32
  mwrPmAdvTxCapRatio Integer32
  mwrPmAdvTxCapAvg Integer32
  mwrPmAdvTxCapAvgRatio Integer32
  mwrPmAdvTxCapHits Integer32
  mwrPmAdvRxCapPeak Integer32
  mwrPmAdvRxCapRatio Integer32
  mwrPmAdvRxCapAvg Integer32
  mwrPmAdvRxCapHits Integer32

MwrUserSessionEntry  
SEQUENCE    
  mwrUserIndex INTEGER
  mwrUserName DisplayString
  mwrUserConnectionType DisplayString
  mwrUserConnectionState INTEGER

Defined Values

mwrModIdentity 1.3.6.1.4.1.7262.4.5.1000
This specifies the contact information and the revision tracking information for the MIB module version.
MODULE-IDENTITY    

mwrPlatformObjId 1.3.6.1.4.1.7262.4.5.1
OBJECT IDENTIFIER    

mwrEbandObjId 1.3.6.1.4.1.7262.4.5.1.1
OBJECT IDENTIFIER    

mwrEnhancedObjId 1.3.6.1.4.1.7262.4.5.1.2
OBJECT IDENTIFIER    

mwrSystem 1.3.6.1.4.1.7262.4.5.2
OBJECT IDENTIFIER    

mwrSystemConfigurations 1.3.6.1.4.1.7262.4.5.2.1
OBJECT IDENTIFIER    

mwrSysSpeed 1.3.6.1.4.1.7262.4.5.2.1.3
OBJECT IDENTIFIER    

mwrSystemStatus 1.3.6.1.4.1.7262.4.5.2.2
OBJECT IDENTIFIER    

mwrSystemCommands 1.3.6.1.4.1.7262.4.5.2.3
OBJECT IDENTIFIER    

mwrSystemInventory 1.3.6.1.4.1.7262.4.5.2.4
OBJECT IDENTIFIER    

mwrHwInventory 1.3.6.1.4.1.7262.4.5.2.4.1
OBJECT IDENTIFIER    

mwrSwInventory 1.3.6.1.4.1.7262.4.5.2.4.2
OBJECT IDENTIFIER    

mwrSystemNotifications 1.3.6.1.4.1.7262.4.5.2.5
OBJECT IDENTIFIER    

mwrSoftware 1.3.6.1.4.1.7262.4.5.3
OBJECT IDENTIFIER    

mwrSoftwareConfigurations 1.3.6.1.4.1.7262.4.5.3.1
OBJECT IDENTIFIER    

mwrSoftwareStatus 1.3.6.1.4.1.7262.4.5.3.2
OBJECT IDENTIFIER    

mwrSoftwareCommands 1.3.6.1.4.1.7262.4.5.3.3
OBJECT IDENTIFIER    

mwrSoftwareNotifications 1.3.6.1.4.1.7262.4.5.3.4
OBJECT IDENTIFIER    

mwrLicensing 1.3.6.1.4.1.7262.4.5.4
OBJECT IDENTIFIER    

mwrLicensingConfigurations 1.3.6.1.4.1.7262.4.5.4.1
OBJECT IDENTIFIER    

mwrLicensingStatus 1.3.6.1.4.1.7262.4.5.4.2
OBJECT IDENTIFIER    

mwrSyncE 1.3.6.1.4.1.7262.4.5.5
OBJECT IDENTIFIER    

mwrSyncEConfigurations 1.3.6.1.4.1.7262.4.5.5.1
OBJECT IDENTIFIER    

mwrSyncEStatus 1.3.6.1.4.1.7262.4.5.5.2
OBJECT IDENTIFIER    

mwrSyncENotifications 1.3.6.1.4.1.7262.4.5.5.3
OBJECT IDENTIFIER    

mwrTiming 1.3.6.1.4.1.7262.4.5.6
OBJECT IDENTIFIER    

mwrTimingConfigurations 1.3.6.1.4.1.7262.4.5.6.1
OBJECT IDENTIFIER    

mwrTimingStatus 1.3.6.1.4.1.7262.4.5.6.2
OBJECT IDENTIFIER    

mwrTimingCommands 1.3.6.1.4.1.7262.4.5.6.3
OBJECT IDENTIFIER    

mwrTimingNotifications 1.3.6.1.4.1.7262.4.5.6.4
OBJECT IDENTIFIER    

mwrAAA 1.3.6.1.4.1.7262.4.5.7
OBJECT IDENTIFIER    

mwrAAAConfigurations 1.3.6.1.4.1.7262.4.5.7.1
OBJECT IDENTIFIER    

mwrRadiusConfigurations 1.3.6.1.4.1.7262.4.5.7.1.2
OBJECT IDENTIFIER    

mwrNetworking 1.3.6.1.4.1.7262.4.5.8
OBJECT IDENTIFIER    

mwrNetworkingConfigurations 1.3.6.1.4.1.7262.4.5.8.1
OBJECT IDENTIFIER    

mwrNetMgmtPriority 1.3.6.1.4.1.7262.4.5.8.1.1
OBJECT IDENTIFIER    

mwrNetMgmtIpv4 1.3.6.1.4.1.7262.4.5.8.1.2
OBJECT IDENTIFIER    

mwrNetMgmttIpv6 1.3.6.1.4.1.7262.4.5.8.1.3
OBJECT IDENTIFIER    

mwrUserInterfaceMgmt 1.3.6.1.4.1.7262.4.5.8.1.4
OBJECT IDENTIFIER    

mwrFileTransfer 1.3.6.1.4.1.7262.4.5.8.1.5
OBJECT IDENTIFIER    

mwrNetworkingStatus 1.3.6.1.4.1.7262.4.5.8.2
OBJECT IDENTIFIER    

mwrMaintenanceIpv4 1.3.6.1.4.1.7262.4.5.8.2.1
OBJECT IDENTIFIER    

mwrMaintenanceIpv6 1.3.6.1.4.1.7262.4.5.8.2.2
OBJECT IDENTIFIER    

mwrPeerNetworkingStatus 1.3.6.1.4.1.7262.4.5.8.3
OBJECT IDENTIFIER    

mwrNetworkingNotifications 1.3.6.1.4.1.7262.4.5.8.4
OBJECT IDENTIFIER    

mwrEthernet 1.3.6.1.4.1.7262.4.5.9
OBJECT IDENTIFIER    

mwrEthernetConfigurations 1.3.6.1.4.1.7262.4.5.9.1
OBJECT IDENTIFIER    

mwrQos 1.3.6.1.4.1.7262.4.5.9.1.1
OBJECT IDENTIFIER    

mwrEthThresholdAlarm 1.3.6.1.4.1.7262.4.5.9.1.2
OBJECT IDENTIFIER    

mwrEthernetStatus 1.3.6.1.4.1.7262.4.5.9.2
OBJECT IDENTIFIER    

mwrEthernetPerformance 1.3.6.1.4.1.7262.4.5.9.3
OBJECT IDENTIFIER    

mwrEthernetNotifications 1.3.6.1.4.1.7262.4.5.9.4
OBJECT IDENTIFIER    

mwrAcm 1.3.6.1.4.1.7262.4.5.10
OBJECT IDENTIFIER    

mwrAcmConfigurations 1.3.6.1.4.1.7262.4.5.10.1
OBJECT IDENTIFIER    

mwrAcmStatus 1.3.6.1.4.1.7262.4.5.10.2
OBJECT IDENTIFIER    

mwrAcmDiagnostics 1.3.6.1.4.1.7262.4.5.10.3
OBJECT IDENTIFIER    

mwrAcmNotifications 1.3.6.1.4.1.7262.4.5.10.4
OBJECT IDENTIFIER    

mwrAtpc 1.3.6.1.4.1.7262.4.5.11
OBJECT IDENTIFIER    

mwrAtpcConfigurations 1.3.6.1.4.1.7262.4.5.11.1
OBJECT IDENTIFIER    

mwrAtpcStatus 1.3.6.1.4.1.7262.4.5.11.2
OBJECT IDENTIFIER    

mwrAtpcNotifications 1.3.6.1.4.1.7262.4.5.11.3
OBJECT IDENTIFIER    

mwrRadio 1.3.6.1.4.1.7262.4.5.12
OBJECT IDENTIFIER    

mwrCompression 1.3.6.1.4.1.7262.4.5.13
OBJECT IDENTIFIER    

mwrCompressionConfigurations 1.3.6.1.4.1.7262.4.5.13.1
OBJECT IDENTIFIER    

mwrCompressionStatus 1.3.6.1.4.1.7262.4.5.13.2
OBJECT IDENTIFIER    

mwrCompressionNotifications 1.3.6.1.4.1.7262.4.5.13.3
OBJECT IDENTIFIER    

mwrEvents 1.3.6.1.4.1.7262.4.5.14
OBJECT IDENTIFIER    

mwrEventsConfigurations 1.3.6.1.4.1.7262.4.5.14.1
OBJECT IDENTIFIER    

mwrLogs 1.3.6.1.4.1.7262.4.5.15
OBJECT IDENTIFIER    

mwrLogsConfigurations 1.3.6.1.4.1.7262.4.5.15.1
OBJECT IDENTIFIER    

mwrPM 1.3.6.1.4.1.7262.4.5.16
OBJECT IDENTIFIER    

mwrPMConfigurations 1.3.6.1.4.1.7262.4.5.16.1
OBJECT IDENTIFIER    

mwrPMStatus 1.3.6.1.4.1.7262.4.5.16.2
OBJECT IDENTIFIER    

mwrPMNotifications 1.3.6.1.4.1.7262.4.5.16.3
OBJECT IDENTIFIER    

mwrUserMgmt 1.3.6.1.4.1.7262.4.5.17
OBJECT IDENTIFIER    

mwrUserConfiguration 1.3.6.1.4.1.7262.4.5.17.1
OBJECT IDENTIFIER    

mwrUserStatus 1.3.6.1.4.1.7262.4.5.17.2
OBJECT IDENTIFIER    

mwrUserNotifications 1.3.6.1.4.1.7262.4.5.17.3
OBJECT IDENTIFIER    

mwrSystemType 1.3.6.1.4.1.7262.4.5.2.1.1
Available system types for single carrier and multi carriers systems are: onePlusZero1cr - 1+0 single carrier onePlusZero2cr - 1+0 dual carriers onePlusZero2crXpic - 1+0 dual carriers XPIC
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER onePlusZero1cr(1), onePlusZero2cr(2), onePlusZero2crXpic(3)  

mwrPacketSwitchMode 1.3.6.1.4.1.7262.4.5.2.1.2
In bridge mode the system is always inband managed on any of the user ports. However in port-isolation mode, the system can be managed outOfBand or inband on a specific port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER bridge(1), port-isolation(2)  

mwrSystemCurrentSpeed 1.3.6.1.4.1.7262.4.5.2.1.3.1
Changes the working speed of the system.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000  

mwrSystemOperStatus 1.3.6.1.4.1.7262.4.5.2.2.1
The current operational state of the system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mwrSystemFaultSeverity 1.3.6.1.4.1.7262.4.5.2.2.2
The current state of the most serious system alarm severity. If system is running diagnostics, the status will be test.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), test(2), warning(3), minor(4), major(5), critical(6)  

mwrSystemTemperature 1.3.6.1.4.1.7262.4.5.2.2.3
The current system temperature.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPlatformType 1.3.6.1.4.1.7262.4.5.2.2.4
Identifies the system platform type. The possible system types are: - eband - enhanced - enhanced-mc
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER eband(1), enhanced(2), enhanced-mc(3)  

mwrPacketSwitchModeStatus 1.3.6.1.4.1.7262.4.5.2.2.5
This object indicates the running configuration for the packet switch mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER bridge(1), port-isolation(2)  

mwrSystemTypeStatus 1.3.6.1.4.1.7262.4.5.2.2.6
This object indicates the running configuration for the system type status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER onePlusZero1cr(1), onePlusZero2cr(2), onePlusZero2crXpic(3)  

mwrResetSystem 1.3.6.1.4.1.7262.4.5.2.3.1
Writing '1' to this object resets the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)  

mwrSaveConfig 1.3.6.1.4.1.7262.4.5.2.3.2
Writing '1' or 'save' to this object saves running configuration of the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER save(1)  

mwrDeleteConfig 1.3.6.1.4.1.7262.4.5.2.3.3
Using this object, either the startup config or the switch config can be deleted. Deleting startup config removes all system configuration for next system restart. Deleting switch config only clears the switch configuration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER startup(1), switch(2)  

mwrMacAddress 1.3.6.1.4.1.7262.4.5.2.4.1.1
The MAC Address of the system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrTargetCfgFilePartNumber 1.3.6.1.4.1.7262.4.5.2.4.1.2
A textual string containing part number of the target configuration file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrUnitSerialNo 1.3.6.1.4.1.7262.4.5.2.4.1.3
A textual string containing Serial Number of the Unit.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrUnitAssemblyNo 1.3.6.1.4.1.7262.4.5.2.4.1.4
A textual string containing the Assembly Number of the Unit.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrBasebandSerialNo 1.3.6.1.4.1.7262.4.5.2.4.1.5
A textual string containing Serial no of the baseband.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrBasebandAssemblyNo 1.3.6.1.4.1.7262.4.5.2.4.1.6
A textual string containing assembly no of the baseband.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrPsuSerialNo 1.3.6.1.4.1.7262.4.5.2.4.1.7
A textual string containing Serial no of the PSU.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrPsuAssemblyNo 1.3.6.1.4.1.7262.4.5.2.4.1.8
A textual string containing assembly no of the PSU.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrRfSerialNo 1.3.6.1.4.1.7262.4.5.2.4.1.9
A textual string containing Serial no of the RF.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrRfAssemblyNo 1.3.6.1.4.1.7262.4.5.2.4.1.10
A textual string containing assembly no of the RF.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrRfRevisionNo 1.3.6.1.4.1.7262.4.5.2.4.1.11
A textual string containing revision no of the RF.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrDiplexerSerialNo 1.3.6.1.4.1.7262.4.5.2.4.1.12
A textual string containing Serial no of the Diplexer.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrDiplexerAssemblyNo 1.3.6.1.4.1.7262.4.5.2.4.1.13
A textual string containing assembly no of the Diplexer.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrSystemCleiNo 1.3.6.1.4.1.7262.4.5.2.4.1.14
A textual string containing system CLEI code.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrSwInventoryTable 1.3.6.1.4.1.7262.4.5.2.4.2.1
Table containing the software inventory.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrSwInventoryEntry

mwrSwInventoryEntry 1.3.6.1.4.1.7262.4.5.2.4.2.1.1
Software inventory entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrSwInventoryEntry  

mwrSwInvBank 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.1
Software bank in the flash.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER bankA(1), bankB(2)  

mwrSwInvStatus 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.2
Software bank status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), backup(2)  

mwrSwInvOmniRelease 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.3
The version number of the Omni.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrSwInvTargetConfFileVersion 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.4
The version number of the target configuration file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrSwInvMibVersion 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.5
The version number of the system MIB.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrSwInvSecurityVersion 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.6
The version number of the security package.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrSysTcfInvalid 1.3.6.1.4.1.7262.4.5.2.5.1
This notification is raised when The HW specific factory defined information (TCF) in the system is not valid.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrSysTempOutOfLimit 1.3.6.1.4.1.7262.4.5.2.5.2
This notification is raised when the system temperature is out of limits.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrSwBackupBankStatus 1.3.6.1.4.1.7262.4.5.3.2.1
This object represents the status of the backup bank.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notValid(1), valid(2), upgrading(3)  

mwrSwCommit 1.3.6.1.4.1.7262.4.5.3.3.1
Writing '1' to this object commits all the active bank settings to the backup bank.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER commit(1)  

mwrSwSwitchBanks 1.3.6.1.4.1.7262.4.5.3.3.2
This objects switches bank to the specified bank. Next time the system resets, it loads up from that bank.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER bankA(1), bankB(2)  

mwrLicenseUpgradeKey 1.3.6.1.4.1.7262.4.5.4.1.1
The 33 Bytes licensing key used for upgrading features/capacity. Reading this object always returns an empty string.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(33)  

mwrLicenseCount 1.3.6.1.4.1.7262.4.5.4.2.1
This object indicates the number of times the system has been upgraded/downgraded with features/capacity.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrLicensedSpeed 1.3.6.1.4.1.7262.4.5.4.2.2
This object indicates the system licensed speed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrLicenseFeaturesTable 1.3.6.1.4.1.7262.4.5.4.2.3
A table containing supported system licensed features.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrLicenseFeaturesEntry

mwrLicenseFeaturesEntry 1.3.6.1.4.1.7262.4.5.4.2.3.1
A table entry containing supported system licensed features.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrLicenseFeaturesEntry  

mwrLicenseFeatureIndex 1.3.6.1.4.1.7262.4.5.4.2.3.1.1
This object indicates the list of system features.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

mwrLicenseFeatureId 1.3.6.1.4.1.7262.4.5.4.2.3.1.2
2 ACM (includes WMA where applicable) (LF2) 3 Ethernet UNI (ELINE/ELAN MEF service) (LF3) 4 Packet Fragmentation (LF4) 5 Secured Access (LF5) 6 Ethernet OAM (802.1ag, 802.3ah, Y.1731) (LF6) 7 Advanced Performance Monitoring (LF7) 11 Bandwidth Accelerator (LF11) 13 Header Compression (LF13)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrLicenseFeature 1.3.6.1.4.1.7262.4.5.4.2.3.1.3
The name of the feature.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrLicenseFeatureStatus 1.3.6.1.4.1.7262.4.5.4.2.3.1.4
Specifies whether the feature is unlicensed or licensed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unlicensed(1), licensed(2)  

mwrSyncEState 1.3.6.1.4.1.7262.4.5.5.1.1
In manual mode, SyncE source will use primary clock source and when the primary source has loss of lock, the SyncE goes into holdover. The primary source will be used again after the system regains the lock on primary source. In auto mode, if the current clock source goes out of lock, the recovered clock from the other source will be used.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(1), manual(2), auto(3)  

mwrSyncEPrimarySource 1.3.6.1.4.1.7262.4.5.5.1.2
Selects which port to be used as SyncE master clock source.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER gi01(1), gi02(2), gi03(3), gi04(4), radio(5), free-run(6)  

mwrSyncESecondarySource 1.3.6.1.4.1.7262.4.5.5.1.3
Selects which port to be used as SyncE clock source when the master SyncE clock source is not available.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER gi01(1), gi02(2), gi03(3), gi04(4), radio(5), free-run(6)  

mwrSyncEMemberPorts 1.3.6.1.4.1.7262.4.5.5.1.4
Enter a string indicating all SyncE member ports. Example: gi01 gi04 Port options: gi01 gi02 gi03 gi04 radio
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mwrSyncEForcedHoldover 1.3.6.1.4.1.7262.4.5.5.1.5
This forces SyncE into holdover mode. After the configurable timeout value, the forced holdover will be taken out. The forced timeout can be 0 to 300sec, where 0 means infinite and default is 30sec. An example of the format of the string is as follows: 'on 20' or 'off'. The second parameter indicates the holdover time in sec. The single quote marks i.e. ' ' are not used in the command.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mwrSyncERevertive 1.3.6.1.4.1.7262.4.5.5.1.6
In revertive mode, if the current source is secondary and the primary is Ok for configured amount of time, the primary will be used. The default revertive time is 10sec. An example of the format of the string is as follows: 'on 20' or 'off'. The second parameter when revertive is turned on is the time in sec. The single quote marks i.e. ' ' are not used in the command.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mwrSyncEWanderFilter 1.3.6.1.4.1.7262.4.5.5.1.7
ITU G.8262 specifies different wander filter requirements for networks based on the 2.048 kbit/s hierarchy , option1, vs those based on the 1.544kbit/s hierarchy, option2. Option 2 specifies a low pass filter bandwidth of 0.1Hz, while option1 specifies a bandwidth between 1 and 10 Hz.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER option1(1), option2(2)  

mwrSyncEClockSource 1.3.6.1.4.1.7262.4.5.5.2.1
Retrieves SyncE clock source currently in use.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER gi01(1), gi02(2), gi03(3), gi04(4), radio(5), free-run(6)  

mwrSyncEAcquisitionStatus 1.3.6.1.4.1.7262.4.5.5.2.2
Retrieves SyncE acquisition status.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrSynceLostLock 1.3.6.1.4.1.7262.4.5.5.3.1
This notification is raised when system has lost synchronization to syncE clock source.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrSynceSecondarySourceInUse 1.3.6.1.4.1.7262.4.5.5.3.2
This notification is raised whens ystem has lost synchronization to primary syncE clock source, and now synchronized to secondary source.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrSynceConfigMismatch 1.3.6.1.4.1.7262.4.5.5.3.3
This notification is raised when the configuration of syncE between the peers in the radio link is mismatched.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrDateTime 1.3.6.1.4.1.7262.4.5.6.1.1
The system date and time.
Status: current Access: read-write
OBJECT-TYPE    
  DateAndTime  

mwrSntpEnable 1.3.6.1.4.1.7262.4.5.6.1.2
Indicates whether SNTP feature is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrSntpOffset 1.3.6.1.4.1.7262.4.5.6.1.3
System time offset from GMT in tenths of hours. For example, an offset of 10 indicates 10 tenths, or 1 hour. An offset of 5 indicates half an hour.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -140..140  

mwrSntpServerTable 1.3.6.1.4.1.7262.4.5.6.1.4
Table containing SNTP server entries
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrSntpServerEntry

mwrSntpServerEntry 1.3.6.1.4.1.7262.4.5.6.1.4.1
Contains the SNTP server information
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrSntpServerEntry  

mwrSntpServerIndex 1.3.6.1.4.1.7262.4.5.6.1.4.1.1
A unique value for each server.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..5  

mwrSntpServerDomain 1.3.6.1.4.1.7262.4.5.6.1.4.1.2
Indicates SNTP server inet address type. Valid types are ipv4 or ipv6.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

mwrSntpServerAddress 1.3.6.1.4.1.7262.4.5.6.1.4.1.3
Indicates SNTP server inet address octet string.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

mwrSntpServerStatus 1.3.6.1.4.1.7262.4.5.6.1.4.1.4
The status of the SNTP server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(1), failed(2)  

mwrSntpServerStratum 1.3.6.1.4.1.7262.4.5.6.1.4.1.5
Specifies the stratum of a server, 0 for failed server
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrTimingLastDateTimeChanged 1.3.6.1.4.1.7262.4.5.6.2.1
Date and Time for the last system time adjustment.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

mwrTimingLastTimeAdjustment 1.3.6.1.4.1.7262.4.5.6.2.2
Last system time adjustment in hundredths of seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrTimingCummulativeTimeChange 1.3.6.1.4.1.7262.4.5.6.2.3
Cumulative system time adjustment in hundredths of seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrSntpRestoreDefault 1.3.6.1.4.1.7262.4.5.6.3.1
Restores SNTP servers to default Addresses.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER restore(1)  

mwrSntpServerUnreachable 1.3.6.1.4.1.7262.4.5.6.4.1
This notification is raised when one or more of the configured SNTP server is not reachable by the system.
Status: current Access: read-write
NOTIFICATION-TYPE    

mwrSystemTimeCorrected 1.3.6.1.4.1.7262.4.5.6.4.2
This notification is raised change in system time is detected, and system time is adjusted
Status: current Access: read-write
NOTIFICATION-TYPE    

mwrAAAUserAuthentication 1.3.6.1.4.1.7262.4.5.7.1.1
This object configures the user authentication method.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER internal(1), radius(2)  

mwrRadiusAdminUserStrict 1.3.6.1.4.1.7262.4.5.7.1.2.1
If strict mode is off, the admin user can login when radius is turned off or unreachable. When strict mode is on, admin user will only be authenticated against the radius server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

mwrRadiusServerTimeOut 1.3.6.1.4.1.7262.4.5.7.1.2.2
Timeout period for authentication requests
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrRadiusServerDeadTime 1.3.6.1.4.1.7262.4.5.7.1.2.3
Time to declare an unresponsive server 'dead'
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrRadiusServerReTransmit 1.3.6.1.4.1.7262.4.5.7.1.2.4
Maximum number of retransmits to an unresponsive server
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrRadiusServerTable 1.3.6.1.4.1.7262.4.5.7.1.2.5
Table containing radius server entries
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrRadiusServerEntry

mwrRadiusServerEntry 1.3.6.1.4.1.7262.4.5.7.1.2.5.1
Contains the SNTP server information
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrRadiusServerEntry  

mwrRadiusServerIndex 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.1
A unique value for each radius server.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..5  

mwrRadiusCfgdHostDomain 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.2
Indicates configured radius inet address type. Valid types are ipv4 or ipv6.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

mwrRadiusCfgdHostAddress 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.3
Indicates configured radius server inet address octet string.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

mwrRadiusCfgdHostKey 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.4
The key of the configured radius server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

mwrNetMgmtVlanPriority 1.3.6.1.4.1.7262.4.5.8.1.1.1
The object configures the VLAN priority(0...7)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

mwrNetMgmtDscp 1.3.6.1.4.1.7262.4.5.8.1.1.2
The Differentiated Services Code Point (DSCP) of IP traffic generated by the system (0...63)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrIpv4Table 1.3.6.1.4.1.7262.4.5.8.1.2.1
A table containing the IPv4 information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrIpv4Entry

mwrIpv4Entry 1.3.6.1.4.1.7262.4.5.8.1.2.1.1
A table entry containing the IPv4 information.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrIpv4Entry  

mwrIpv4Index 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.1
The IPv4 table index. There is only one entry in this table and can not be deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1  

mwrIpv4Address 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.2
The IPv4 address of the system.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

mwrIpv4SubnetMask 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.3
The IPv4 subnet mask of the system.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

mwrIpv4DefaultGateway 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.4
The IPv4 default gateway of the system.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

mwrIpv4RowStatus 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.5
This object is used for applying ipv4 configuration attributes simultaneously.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

mwrSecondaryGateway 1.3.6.1.4.1.7262.4.5.8.1.2.2
The IPv4 secondary gateway of the system.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

mwrIpv6Table 1.3.6.1.4.1.7262.4.5.8.1.3.1
A table containing the IPv6 information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrIpv6Entry

mwrIpv6Entry 1.3.6.1.4.1.7262.4.5.8.1.3.1.1
A table entry containing the IPv6 information.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrIpv6Entry  

mwrIpv6Index 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.1
The IPv6 table index. There is only one entry in this table and can not be deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1  

mwrIpv6Domain 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.2
Indicates ipv6 inet address type.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

mwrIpv6Address 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.3
Indicates IPv6 inet address octet string.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

mwrIpv6Prefix 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.4
Indicates ipv6 prefix.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrIpv6GatewayDomain 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.5
Indicates IPv6 gateway inet address type. This will always return IPv6 inet address type.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

mwrIpv6GatewayAddress 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.6
Indicates IPv6 gateway inet address octet string.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

mwrIpv6RowStatus 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.7
This object is used for applying IPv6 configuration attributes simultaneously.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

mwrSecondaryIpv6GatewayDomain 1.3.6.1.4.1.7262.4.5.8.1.3.2
This object will return the secondary IPv6 gateway inet address type.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

mwrSecondaryIpv6GatewayAddress 1.3.6.1.4.1.7262.4.5.8.1.3.3
This object will return the secondary IPv6 gateway inet address.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

mwrTelnetEnable 1.3.6.1.4.1.7262.4.5.8.1.4.1
Indicates whether telnet access is allowed.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrSshEnable 1.3.6.1.4.1.7262.4.5.8.1.4.2
Indicates whether ssh access is allowed. This configuration only applies to security mode.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrHttpEnable 1.3.6.1.4.1.7262.4.5.8.1.4.3
Indicates whether http is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrHttpsEnable 1.3.6.1.4.1.7262.4.5.8.1.4.4
Indicates whether secured http access is allowed. This configuration only applies to security mode.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrSnmpv1v2cEnable 1.3.6.1.4.1.7262.4.5.8.1.4.5
Indicates whether SNMP v1/v2c is allowed in security mode. This configuration only applies to security mode.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrFtpEnable 1.3.6.1.4.1.7262.4.5.8.1.4.6
This object allows enabling or disabling ftp when in secure mode. By default ftp is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrFileXfrDirection 1.3.6.1.4.1.7262.4.5.8.1.5.1
The behavior of the FTP/SFTP machine: 1 - ServerMode 2 - ClientMode 3 - both Server and Client available Mwr 1.0 just supports Client Mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER serverMode(1), clientMode(2), both(3)  

mwrFileXfrTable 1.3.6.1.4.1.7262.4.5.8.1.5.2
Table containing the FTP client parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrFileXfrEntry

mwrFileXfrEntry 1.3.6.1.4.1.7262.4.5.8.1.5.2.1
Table entry containing the FTP client parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrFileXfrEntry  

mwrFileXfrSeqID 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.1
For the same manager, the possibility to define different FTP/SFTP transfer actions.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..20  

mwrFileXfrIdentifier 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.2
The identifier of the type of file to be imported/exported.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER omni(1), tcfFile(2), configFile(3), eventLog(4), pmFile(5), security(6), perfLog(7)  

mwrFileXfrName 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.3
The Name of the file to be imported/exported.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

mwrFileXfrMode 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.4
The file transfer mode specifying either a ftp or sftp request. The sftp mode is only supported when security is licensed/installed.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ftp(1), sftp(2)  

mwrFileXfrServerDomain 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.5
The server domain such as IPv4 or IPv6 type.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

mwrFileXfrServerAddress 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.6
The server IP address in InetAddress format which could be an IPv4 or IPv6 address.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

mwrFileXfrClientDirection 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.7
The behavior of the FTP or SFTP Client: 1 - import, i.e. download data file 2 - export, i.e. upload data file. The only supported option for omni and tcf is import since these files are used only in upgrade case. Also the supported option for pm, eventlog and perfLog is export option. The rest can be imported or exported.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER import(1), export(2)  

mwrFileXfrUserName 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.8
FTP or SFTP User Name when Client Mode is selected.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

mwrFileXfrPassword 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.9
FTP or SFTP password when Client Mode is selected. For get operation - the returned value will be zero length string.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

mwrFileXfrNumEntries 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.10
This object is used to indicate the number of entries for the performance log to be transferred. If it's set to zero, it will transfer the entire file.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

mwrFileXfrStatus 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.11
This object contains the current status of the last requested import/export of the corresponding row component.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(1), inProgress(2), failed(3)  

mwrFileXfrRowStatus 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.12
The row status variable, used according to: - Manager can create a row using the createAndWait. - Once created, the row is put into notInService by Agent. - On Manager request, row status can be set to active one at a time. This means that the Client has to start the file transfer. - Row data, such as the FileServerAddress, User Name or Password can be changed once the row has been created, but only if this field is set to notInService. All other fields can not be set once the row is created, but the row must be removed and created again. - Manager can use destroy to remove the row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

mwrNetMgmtInterfaceTable 1.3.6.1.4.1.7262.4.5.8.1.6
Table containing the network management interface configurations.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrNetMgmtInterfaceEntry

mwrNetMgmtInterfaceEntry 1.3.6.1.4.1.7262.4.5.8.1.6.1
Entry for the network management interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrNetMgmtInterfaceEntry  

mwrNetMgmtInterfaceIndex 1.3.6.1.4.1.7262.4.5.8.1.6.1.1
This object is an index to network management interface table. There will always be one entry in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

mwrNetMgmtVlanId 1.3.6.1.4.1.7262.4.5.8.1.6.1.2
Indicates the VLAN Id (1...4090)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4090  

mwrNetMgmtInterface1 1.3.6.1.4.1.7262.4.5.8.1.6.1.3
When this object is enabled the gi0/1 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrNetMgmtInterface1Mode 1.3.6.1.4.1.7262.4.5.8.1.6.1.4
This object indicates whether the gi0/1 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER inband(1), outOfBand(2), none(3)  

mwrNetMgmtInterface1Tagged 1.3.6.1.4.1.7262.4.5.8.1.6.1.5
This object indicates whether the system will be managed with vlan tagged management traffic or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no-vlan-tag(1), vlan-tag(2)  

mwrNetMgmtInterface2 1.3.6.1.4.1.7262.4.5.8.1.6.1.6
When this object is enabled the gi0/2 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrNetMgmtInterface2Mode 1.3.6.1.4.1.7262.4.5.8.1.6.1.7
This object indicates whether the gi0/2 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER inband(1), outOfBand(2), none(3)  

mwrNetMgmtInterface2Tagged 1.3.6.1.4.1.7262.4.5.8.1.6.1.8
This object indicates whether the system will be managed with vlan tagged management traffic or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no-vlan-tag(1), vlan-tag(2)  

mwrNetMgmtInterface3 1.3.6.1.4.1.7262.4.5.8.1.6.1.9
When this object is enabled the gi0/3 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrNetMgmtInterface3Mode 1.3.6.1.4.1.7262.4.5.8.1.6.1.10
This object indicates whether the gi0/3 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER inband(1), outOfBand(2), none(3)  

mwrNetMgmtInterface3Tagged 1.3.6.1.4.1.7262.4.5.8.1.6.1.11
This object indicates whether the system will be managed with vlan tagged management traffic or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no-vlan-tag(1), vlan-tag(2)  

mwrNetMgmtInterface4 1.3.6.1.4.1.7262.4.5.8.1.6.1.12
When this object is enabled the gi0/4 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrNetMgmtInterface4Mode 1.3.6.1.4.1.7262.4.5.8.1.6.1.13
This object indicates whether the gi0/4 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER inband(1), outOfBand(2), none(3)  

mwrNetMgmtInterface4Tagged 1.3.6.1.4.1.7262.4.5.8.1.6.1.14
This object indicates whether the system will be managed with vlan tagged management traffic or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no-vlan-tag(1), vlan-tag(2)  

mwrNetMgmtInterfaceRowStatus 1.3.6.1.4.1.7262.4.5.8.1.6.1.15
This object is used for applying all management interface configuration in an atomic operation.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

mwrMaintenanceIpv4Address 1.3.6.1.4.1.7262.4.5.8.2.1.1
This object indicates the maintenance IPv4 address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

mwrMaintenanceSubnetMask 1.3.6.1.4.1.7262.4.5.8.2.1.2
This object indicates the maintenance IPv4 subnet mask.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

mwrActiveIpv4Gateway 1.3.6.1.4.1.7262.4.5.8.2.1.3
This object indicates the active IPv4 gateway.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

mwrIpv6LinkLocalIPrefix 1.3.6.1.4.1.7262.4.5.8.2.2.1
This object indicates the IPv6 link local prefix.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrIpv6LinkLocalAddress 1.3.6.1.4.1.7262.4.5.8.2.2.2
Indicates ipv6 link local inet address octet string.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

mwrActiveIpv6Gateway 1.3.6.1.4.1.7262.4.5.8.2.2.3
This object indicates the active IPv6 gateway.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

mwrPeerMacAddress 1.3.6.1.4.1.7262.4.5.8.3.1
The MAC Address of the peer.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrPeerIpv4Address 1.3.6.1.4.1.7262.4.5.8.3.2
The peer IPv4 Address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

mwrPeerIpv4SubnetMask 1.3.6.1.4.1.7262.4.5.8.3.3
The peer IPv4 subnet mask.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

mwrPeerIpv4DefaultGateway 1.3.6.1.4.1.7262.4.5.8.3.4
The peer IPv4 default gateway.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

mwrPeerIpv6Prefix 1.3.6.1.4.1.7262.4.5.8.3.5
The peer IPv6 prefix.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPeerIpv6Domain 1.3.6.1.4.1.7262.4.5.8.3.6
The peer IPv6 domain.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

mwrPeerIpv6Address 1.3.6.1.4.1.7262.4.5.8.3.7
The peer IPv6 address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

mwrPeerIpv6GatewayDomain 1.3.6.1.4.1.7262.4.5.8.3.8
The peer IPv6 gateway domain
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

mwrPeerIpv6GatewayAddress 1.3.6.1.4.1.7262.4.5.8.3.9
The peer IPv6 gateway address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

mwrPeerVlanId 1.3.6.1.4.1.7262.4.5.8.3.10
The peer vlan Id.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPeerVlanPriority 1.3.6.1.4.1.7262.4.5.8.3.11
The peer vlan priority.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPeerDscp 1.3.6.1.4.1.7262.4.5.8.3.12
The peer management dscp.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrQosState 1.3.6.1.4.1.7262.4.5.9.1.1.1
Indicates whether QOS is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrCosSource 1.3.6.1.4.1.7262.4.5.9.1.1.2
Indicates the class of service tag type. Based on the setting system will use the CoS value in the outer VLAN tag, inner VLAN tag, DSCP or MPLS exp.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER oTag(1), iTag(2), dscp(3), mplsExp(4)  

mwrOuterTpid 1.3.6.1.4.1.7262.4.5.9.1.1.3
Sets the value of the Q-in-Q outer tag. This tag is also used to classify the single tagged traffic. Default value is 0x8100.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mwrInnerTpid 1.3.6.1.4.1.7262.4.5.9.1.1.4
Sets the value of the Q-in-Q inner VLAN tag. Default value is 0x8100.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mwrCosTable 1.3.6.1.4.1.7262.4.5.9.1.1.5
A table of Qos Settings per port, the configuration corresponds to the egress QoS of radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrCosEntry

mwrCosEntry 1.3.6.1.4.1.7262.4.5.9.1.1.5.1
An entry of Qos setting per port
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrCosEntry  

mwrCosIndex 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.1
A unique name identifying each enet port in port isolation mode or the bridgeMode index when system is configured in bridge mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER gi01(1), gi02(2), gi03(3), gi04(4), bridgeMode(5)  

mwrCos0 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.2
User queue assignments for CoS0. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
Status: current Access: read-write
OBJECT-TYPE    
  QueueType  

mwrCos1 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.3
User queue assignments for CoS1. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
Status: current Access: read-write
OBJECT-TYPE    
  QueueType  

mwrCos2 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.4
User queue assignments for CoS2. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
Status: current Access: read-write
OBJECT-TYPE    
  QueueType  

mwrCos3 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.5
User queue assignments for CoS3. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
Status: current Access: read-write
OBJECT-TYPE    
  QueueType  

mwrCos4 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.6
User queue assignments for CoS4. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
Status: current Access: read-write
OBJECT-TYPE    
  QueueType  

mwrCos5 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.7
User queue assignments for CoS5. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
Status: current Access: read-write
OBJECT-TYPE    
  QueueType  

mwrCos6 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.8
User queue assignments for CoS6. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
Status: current Access: read-write
OBJECT-TYPE    
  QueueType  

mwrCos7 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.9
User queue assignments for CoS7. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
Status: current Access: read-write
OBJECT-TYPE    
  QueueType  

mwrCosRowStatus 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.10
Row status for CoS queue mapping. This object is used to apply all CoS settings simultaneously.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

mwrCosDefValueTable 1.3.6.1.4.1.7262.4.5.9.1.1.6
A table containing the CoS default value, the configuration corresponds to the egress QoS of radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrCosDefValueEntry

mwrCosDefValueEntry 1.3.6.1.4.1.7262.4.5.9.1.1.6.1
A table entry containing the CoS default value.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrCosDefValueEntry  

mwrCosDefValueIndex 1.3.6.1.4.1.7262.4.5.9.1.1.6.1.1
Specifies CoS default value for each port in port isolation or in bridge mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER gi01(1), gi02(2), gi03(3), gi04(4), bridgeMode(5)  

mwrCosDefValue 1.3.6.1.4.1.7262.4.5.9.1.1.6.1.2
Specifies CoS default value for each port in port isolation or in bridge mode.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCirQTable 1.3.6.1.4.1.7262.4.5.9.1.1.7
A table containing the CIR value for each queue, the configuration corresponds to the egress QoS of radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrCirQEntry

mwrCirQEntry 1.3.6.1.4.1.7262.4.5.9.1.1.7.1
A table entry containing the CIR value for each radio queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrCirQEntry  

mwrCirQIndex 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.1
Specifies CIR queue index for each radio queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  QueueType  

mwrCirQ1 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.2
User CIR setting for queue 1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCirQ2 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.3
User CIR setting for queue 2.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCirQ3 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.4
User CIR setting for queue 3.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCirQ4 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.5
User CIR setting for queue 4.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCirQ5 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.6
User CIR setting for queue 5.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCirQ6 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.7
User CIR setting for queue 6.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCirQ7 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.8
User CIR setting for queue 7.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCirQ8 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.9
User CIR setting for queue 8.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCirQRowStatus 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.10
The CIR table Row status. This object is used to apply all queue CIR settings simultaneously.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

mwrCbsQTable 1.3.6.1.4.1.7262.4.5.9.1.1.8
A table containing CBS settings for each queue, the configuration corresponds to the egress QoS of radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrCbsQEntry

mwrCbsQEntry 1.3.6.1.4.1.7262.4.5.9.1.1.8.1
A table entry containing CBS settings for each queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrCbsQEntry  

mwrCbsQIndex 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.1
Specifies CBS queue index for each radio queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  QueueType  

mwrCbsQ1 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.2
User CBS setting for queue 1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCbsQ2 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.3
User CBS setting for queue 2.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCbsQ3 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.4
User CBS setting for queue 3.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCbsQ4 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.5
User CBS setting for queue 4.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCbsQ5 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.6
User CBS setting for queue 5.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCbsQ6 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.7
User CBS setting for queue 6.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCbsQ7 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.8
User CBS setting for queue 7.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCbsQ8 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.9
User CBS setting for queue 8.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrCbsQRowStatus 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.10
The CBS table Row status. This object is used to apply all queue CBS settings simultaneously.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

mwrWeightQTable 1.3.6.1.4.1.7262.4.5.9.1.1.9
A table containing queue weight setting for each queue, the configuration corresponds to the egress QoS of radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrWeightQEntry

mwrWeightQEntry 1.3.6.1.4.1.7262.4.5.9.1.1.9.1
A table entry containing queue weight setting for each queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrWeightQEntry  

mwrWeightQIndex 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.1
Specifies queue weight index for each radio queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  QueueType  

mwrWeightQ1 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.2
Specifies queue weight value for queue 1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrWeightQ2 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.3
Specifies queue weight value for queue 2.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrWeightQ3 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.4
Specifies queue weight value for queue 3.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrWeightQ4 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.5
Specifies queue weight value for queue 4.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrWeightQ5 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.6
Specifies queue weight value for queue 5.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrWeightQ6 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.7
Specifies queue weight value for queue 6.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrWeightQ7 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.8
Specifies queue weight value for queue 7.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrWeightQ8 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.9
Specifies queue weight value for queue 8.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrWeightQRowStatus 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.10
The queue weight table Row status. This object is used to apply all queue weight settings simultaneously.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

mwrQbsQTable 1.3.6.1.4.1.7262.4.5.9.1.1.10
A table containing queue buffer size, the configuration corresponds to the egress QoS of radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrQbsQEntry

mwrQbsQEntry 1.3.6.1.4.1.7262.4.5.9.1.1.10.1
A table entry containing queue buffer size.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrQbsQEntry  

mwrQbsQIndex 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.1
Specifies QBS queue index for each radio queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  QueueType  

mwrQbsQ1 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.2
Specifies queue buffer size (QBS) for queue 1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrQbsQ2 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.3
Specifies queue buffer size (QBS) for queue 2.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrQbsQ3 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.4
Specifies queue buffer size (QBS) for queue 3.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrQbsQ4 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.5
Specifies queue buffer size (QBS) for queue 4.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrQbsQ5 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.6
Specifies queue buffer size (QBS) for queue 5.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrQbsQ6 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.7
Specifies queue buffer size (QBS) for queue 6.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrQbsQ7 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.8
Specifies queue buffer size (QBS) for queue 7.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrQbsQ8 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.9
Specifies queue buffer size (QBS) for queue 8.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrQbsQRowStatus 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.10
The queue buffer size (QBS) table Row status. This object is used to apply all queue QBS settings simultaneously.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

mwrPolicyQTable 1.3.6.1.4.1.7262.4.5.9.1.1.11
A table containing queue policy for each queue, the configuration corresponds to the egress QoS of radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrPolicyQEntry

mwrPolicyQEntry 1.3.6.1.4.1.7262.4.5.9.1.1.11.1
A table entry containing queue policy for each queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrPolicyQEntry  

mwrPolicyQIndex 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.1
Specifies queue policy index for each radio queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  QueueType  

mwrPolicyQ1 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.2
User queue policy value for queue 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wfq(1), priority(2), pf(3)  

mwrPolicyQ2 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.3
User queue policy value for queue 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wfq(1), priority(2), pf(3)  

mwrPolicyQ3 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.4
User queue policy value for queue 3.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wfq(1), priority(2), pf(3)  

mwrPolicyQ4 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.5
User queue policy value for queue 4.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wfq(1), priority(2), pf(3)  

mwrPolicyQ5 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.6
User queue policy value for queue 5.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wfq(1), priority(2), pf(3)  

mwrPolicyQ6 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.7
User queue policy value for queue 6.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wfq(1), priority(2), pf(3)  

mwrPolicyQ7 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.8
User queue policy value for queue 7.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wfq(1), priority(2), pf(3)  

mwrPolicyQ8 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.9
User queue policy value for queue 8.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wfq(1), priority(2), pf(3)  

mwrPolicyQRowStatus 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.10
The queue policy table Row status. This object is used to apply all queue policy settings simultaneously.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

mwrUserClassTable 1.3.6.1.4.1.7262.4.5.9.1.1.12
A table containing QOS user class settings, the configuration corresponds to the egress QoS of radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrUserClassEntry

mwrUserClassEntry 1.3.6.1.4.1.7262.4.5.9.1.1.12.1
A table entry containing QOS user class settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrUserClassEntry  

mwrUserClassIndex 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.1
Specifies user class queue index for each radio queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  ClassType  

mwrUserClassOffset 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.2
Specifies user class offset value.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrUserClassValue 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.3
Specifies user class value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mwrUserClassMask 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.4
Specifies user class mask.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mwrUserFlowTable 1.3.6.1.4.1.7262.4.5.9.1.1.13
A table containing QOS user flow settings, the configuration corresponds to the egress QoS of radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrUserFlowEntry

mwrUserFlowEntry 1.3.6.1.4.1.7262.4.5.9.1.1.13.1
A table entry containing QOS user flow settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrUserFlowEntry  

mwrUserFlowIndex 1.3.6.1.4.1.7262.4.5.9.1.1.13.1.1
Specifies user flow filter queue index for each queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  FlowType  

mwrUserFlowFilter 1.3.6.1.4.1.7262.4.5.9.1.1.13.1.2
Specifies user flow filter value for each queue.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mwrUserFlowMappingTable 1.3.6.1.4.1.7262.4.5.9.1.1.14
A table containing QOS user flow mapping settings in port isolation mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrUserFlowMappingEntry

mwrUserFlowMappingEntry 1.3.6.1.4.1.7262.4.5.9.1.1.14.1
A table entry containing QOS user flow mapping settings in port isolation mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrUserFlowMappingEntry  

mwrUserFlowMappingIndex 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.1
Specifies user flow mapping index for each flow in port isolation mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  FlowType  

mwrUserFlowMappingState 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.2
Enables or disabled user flow mapping for a specific flow in port isolation mode.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrUserFlowMapping1Q 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.3
Specifies the selected queue for gi01 in port isolation mode.
Status: current Access: read-write
OBJECT-TYPE    
  QueueType  

mwrUserFlowMapping2Q 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.4
Specifies the selected queue for gi02 in port isolation mode.
Status: current Access: read-write
OBJECT-TYPE    
  QueueType  

mwrUserFlowMapping3Q 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.5
Specifies the selected queue for gi03 in port isolation mode.
Status: current Access: read-write
OBJECT-TYPE    
  QueueType  

mwrUserFlowMapping4Q 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.6
Specifies the selected queue for gi04 in port isolation mode.
Status: current Access: read-write
OBJECT-TYPE    
  QueueType  

mwrUserFlowMappingRowStatus 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.7
Row status for user flow mapping in port isolation mode.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

mwrUserFlowMappingBridgeModeTable 1.3.6.1.4.1.7262.4.5.9.1.1.15
A table containing QOS user flow mapping settings in bridge mode, the configuration corresponds to the egress QoS of radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrUserFlowMappingBridgeModeEntry

mwrUserFlowMappingBridgeModeEntry 1.3.6.1.4.1.7262.4.5.9.1.1.15.1
A table entry containing QOS user flow mapping settings in bridge mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrUserFlowMappingBridgeModeEntry  

mwrUserFlowMappingBridgeModeIndex 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.1
Specifies user flow mapping index for each flow in bridge mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  FlowType  

mwrUserFlowMappingBridgeModeState 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.2
Enables or disabled user flow mapping for a specific flow in bridge mode.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrUserFlowMappingBridgeModeQ 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.3
Specifies the selected user flow mapping queue in bridge mode.
Status: current Access: read-write
OBJECT-TYPE    
  QueueType  

mwrUserFlowMappingBridgeModeRowStatus 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.4
Row status for user flow mapping in bridge mode.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

mwrPortThresholdAlarmTable 1.3.6.1.4.1.7262.4.5.9.1.2.1
A table containing threshold alarms parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrPortThresholdAlarmEntry

mwrPortThresholdAlarmEntry 1.3.6.1.4.1.7262.4.5.9.1.2.1.1
A table entry containing threshold alarms parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrPortThresholdAlarmEntry  

mwrPortThresholdAlarmIndex 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.1
Index to Threshold alarm table. Instance 1 indicates Radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

mwrDroppedPktsThresholdParams 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.2
This object configures the dropped packets threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of packets that are dropped, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..24)  

mwrOutBWUtilizationThresholdParams 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.3
This object configures the BW utilization threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of BW threshold, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mwrThroughputThresholdParams 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.4
This object configures the radio throughput threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of the throughput, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mwrRadioQThresholdAlarmTable 1.3.6.1.4.1.7262.4.5.9.1.2.2
A table of radio port queue based Threshold Alarm settings, the configuration corresponds to the egress QoS of radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrRadioQThresholdAlarmEntry

mwrRadioQThresholdAlarmEntry 1.3.6.1.4.1.7262.4.5.9.1.2.2.1
A table entry of queue based Threshold Alarm settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrRadioQThresholdAlarmEntry  

mwrRadioQThresholdAlarmIndex 1.3.6.1.4.1.7262.4.5.9.1.2.2.1.1
A unique identifier for one of the 8 queues
Status: current Access: read-only
OBJECT-TYPE    
  QueueType  

mwrRadioQDepthThresholdParams 1.3.6.1.4.1.7262.4.5.9.1.2.2.1.2
The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of queue depth, the second is the time in seconds that the threshold must be exceeded.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mwrRadioQDroppedPktsThresholdParams 1.3.6.1.4.1.7262.4.5.9.1.2.2.1.3
The threshold, in packets, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the number of packets that are dropped, the second is the time in seconds that the threshold must be exceeded.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mwrEnetPerfPortStatsTable 1.3.6.1.4.1.7262.4.5.9.3.1
A table containing Ethernet port statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrEnetPerfPortStatsEntry

mwrEnetPerfPortStatsEntry 1.3.6.1.4.1.7262.4.5.9.3.1.1
A table entry containing Ethernet port statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrEnetPerfPortStatsEntry  

mwrEnetPortStatsIndex 1.3.6.1.4.1.7262.4.5.9.3.1.1.1
A table index to Ethernet ports.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER gi01(1), gi02(2), gi03(3), gi04(4), radio(5)  

mwrPortStatsInOctet 1.3.6.1.4.1.7262.4.5.9.3.1.1.2
A 64-bit counter representing the incoming octets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mwrPortStatsInGoodPkts 1.3.6.1.4.1.7262.4.5.9.3.1.1.3
A 64-bit counter representing the incoming good packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mwrPortStatsInErrPkts 1.3.6.1.4.1.7262.4.5.9.3.1.1.4
A 64-bit counter representing the incoming error packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mwrPortStatsInDiscardPkts 1.3.6.1.4.1.7262.4.5.9.3.1.1.5
A 64-bit counter representing the incoming discarded packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mwrPortStatsOutOctets 1.3.6.1.4.1.7262.4.5.9.3.1.1.6
A 64-bit counter representing the outgoing octets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mwrPortStatsOutGoodPkts 1.3.6.1.4.1.7262.4.5.9.3.1.1.7
A 64-bit counter representing the outgoing good packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mwrPortStatsOutErrPkts 1.3.6.1.4.1.7262.4.5.9.3.1.1.8
A 64-bit counter representing the outgoing error packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mwrPortStatsOutDiscardPkts 1.3.6.1.4.1.7262.4.5.9.3.1.1.9
A 64-bit counter representing the outgoing discarded packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mwrPortStatsOutBwUtilization 1.3.6.1.4.1.7262.4.5.9.3.1.1.10
This object represents the ratio of egress data rate and the egress link capacity of the port. The value is represented in %.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPortStatsInBwUtilization 1.3.6.1.4.1.7262.4.5.9.3.1.1.11
This object represents the ratio of ingress data rate and the ingress link capacity of the port. The value is represented in %.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPortStatsInDataRate 1.3.6.1.4.1.7262.4.5.9.3.1.1.12
The Ethernet data rate coming into the port. The data rate is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPortStatsThroughput 1.3.6.1.4.1.7262.4.5.9.3.1.1.13
The Ethernet data rate going out of the port. The data rate is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrEnetPerfPortStats32BitTable 1.3.6.1.4.1.7262.4.5.9.3.2
A table containing 32-bit Ethernet statistics. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrEnetPerfPortStats32BitEntry

mwrEnetPerfPortStats32BitEntry 1.3.6.1.4.1.7262.4.5.9.3.2.1
A table entry containing 32-bit Ethernet statistics. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrEnetPerfPortStats32BitEntry  

mwrPortStats32BitIndex 1.3.6.1.4.1.7262.4.5.9.3.2.1.1
A table index to ports carrying Ethernet packets.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER gi01(1), gi02(2), gi03(3), gi04(4), radio(5)  

mwrPortStatsInOctet32Bit 1.3.6.1.4.1.7262.4.5.9.3.2.1.2
A 32-bit counter representing the incoming octets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mwrPortStatsInGoodPkts32Bit 1.3.6.1.4.1.7262.4.5.9.3.2.1.3
A 32-bit counter representing the incoming good packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mwrPortStatsInErrPkts32Bit 1.3.6.1.4.1.7262.4.5.9.3.2.1.4
A 32-bit counter representing the incoming error packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mwrPortStatsInDiscardPkts32Bit 1.3.6.1.4.1.7262.4.5.9.3.2.1.5
A 32-bit counter representing the incoming discarded packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mwrPortStatsOutOctets32Bit 1.3.6.1.4.1.7262.4.5.9.3.2.1.6
A 32-bit counter representing the outgoing octets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mwrPortStatsOutGoodPkts32Bit 1.3.6.1.4.1.7262.4.5.9.3.2.1.7
A 32-bit counter representing the outgoing good packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mwrPortStatsOutErrPkts32Bit 1.3.6.1.4.1.7262.4.5.9.3.2.1.8
A 32-bit counter representing the outgoing error packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mwrPortStatsOutDiscardPkts32Bit 1.3.6.1.4.1.7262.4.5.9.3.2.1.9
A 32-bit counter representing the outgoing discarded packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mwrEnetPerfRadioQStatsTable 1.3.6.1.4.1.7262.4.5.9.3.3
A table containing radio queue statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrEnetPerfRadioQStatsEntry

mwrEnetPerfRadioQStatsEntry 1.3.6.1.4.1.7262.4.5.9.3.3.1
A table entry containing radio queue statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrEnetPerfRadioQStatsEntry  

mwrRadioQStatsIndex 1.3.6.1.4.1.7262.4.5.9.3.3.1.1
A unique value for each of the 8 queues.
Status: current Access: not-accessible
OBJECT-TYPE    
  QueueType  

mwrRadioQStatsInGoodPkts 1.3.6.1.4.1.7262.4.5.9.3.3.1.2
The current count of packets in queues.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mwrRadioQStatsInDiscardPkts 1.3.6.1.4.1.7262.4.5.9.3.3.1.3
The current count of packets received in queues that were discarded due to queue overflow.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mwrRadioQStatsOutBwUtilization 1.3.6.1.4.1.7262.4.5.9.3.3.1.4
The ratio of egress data rate and user configured radio queue CIR.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrRadioQStatsInDataRate 1.3.6.1.4.1.7262.4.5.9.3.3.1.5
The ingress data rate of the radio queue.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrRadioQStatsThroughput 1.3.6.1.4.1.7262.4.5.9.3.3.1.6
The throughput of the radio queue.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrEnetPerfRadioQStats32BitTable 1.3.6.1.4.1.7262.4.5.9.3.4
A table containing 32-bit counters for radio queue statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrEnetPerfRadioQStats32BitEntry

mwrEnetPerfRadioQStats32BitEntry 1.3.6.1.4.1.7262.4.5.9.3.4.1
A table entry containing 32-bit counters for radio queue statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrEnetPerfRadioQStats32BitEntry  

mwrRadioQStats32BitIndex 1.3.6.1.4.1.7262.4.5.9.3.4.1.1
A unique value for each of the 8 queues.
Status: current Access: not-accessible
OBJECT-TYPE    
  QueueType  

mwrRadioQStatsInGoodPkts32Bit 1.3.6.1.4.1.7262.4.5.9.3.4.1.2
A 32-bit counter representing the current count of packets in queues.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mwrRadioQStatsDiscardPkts32Bit 1.3.6.1.4.1.7262.4.5.9.3.4.1.3
A 32-bit counter representing the current count of packets received in queues that were discarded due to queue overflow .
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mwrDroppedPktsThreshold 1.3.6.1.4.1.7262.4.5.9.4.1
This notification is raised when the ethernet packet drops in an interface has exceeded user set limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrRadioQDroppedPktsThreshold 1.3.6.1.4.1.7262.4.5.9.4.2
This notification is raised when Ethernet packet drops over radio traffic queue has exceeded the user configured limit. The mwrRadioQThresholdAlarmIndex varbind indicates specific queue number.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrRadioQDepthThreshold 1.3.6.1.4.1.7262.4.5.9.4.3
This notification is raised when the data buffered in the specific radio traffic queue has exceeded the user set limit. The mwrRadioQThresholdAlarmIndex varbind indicates specific queue number.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrOutBWUtilizationThreshold 1.3.6.1.4.1.7262.4.5.9.4.4
This notification is raised when the out bandwidth utilization of an interface has exceeded the user configured limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrThroughputThreshold 1.3.6.1.4.1.7262.4.5.9.4.5
This notification is raised when the throughput of an interface has exceeded the user configured limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrAcmManualMode 1.3.6.1.4.1.7262.4.5.10.1.1
Enables or disables the Adaptive Coding Modulation (ACM) Manual Mode.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrAcmState 1.3.6.1.4.1.7262.4.5.10.1.2
Enables or disables the Adaptive Code Modulation (ACM).
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrAcmWaitToRestore 1.3.6.1.4.1.7262.4.5.10.1.3
This object configures the ACM wait to restore duration time in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrAcmModeTable 1.3.6.1.4.1.7262.4.5.10.1.4
A table containing available Adaptive Code Modulation (ACM) tx profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrAcmModeEntry

mwrAcmModeEntry 1.3.6.1.4.1.7262.4.5.10.1.4.1
A table entry containing available Adaptive Code Modulation (ACM) tx profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrAcmModeEntry  

mwrAcmModeIndex 1.3.6.1.4.1.7262.4.5.10.1.4.1.1
A unique value for each Adaptive Code Modulation (ACM) tx profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

mwrAcmTxProfileName 1.3.6.1.4.1.7262.4.5.10.1.4.1.2
The Adaptive Code Modulation (ACM) tx profile name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrAcmTxProfileRange 1.3.6.1.4.1.7262.4.5.10.1.4.1.3
Specifies the range for the Adaptive Code Modulation (ACM) TX Profile.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notAllowed(1), allowed(2), max(3), min(4)  

mwrAcmStatusTable 1.3.6.1.4.1.7262.4.5.10.2.1
A table containing Adaptive Code Modulation (ACM) status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrAcmStatusEntry

mwrAcmStatusEntry 1.3.6.1.4.1.7262.4.5.10.2.1.1
A table entry containing Adaptive Code Modulation (ACM) status.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrAcmStatusEntry  

mwrAcmStatusIndex 1.3.6.1.4.1.7262.4.5.10.2.1.1.1
A unique value for each interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  RadioInstanceType  

mwrAcmActualTxProfile 1.3.6.1.4.1.7262.4.5.10.2.1.1.2
A read-only string specifying the currently running ACM TX profile.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..24)  

mwrAcmDiagTable 1.3.6.1.4.1.7262.4.5.10.3.1
A table containing ACM diagnostic settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrAcmDiagEntry

mwrAcmDiagEntry 1.3.6.1.4.1.7262.4.5.10.3.1.1
A table entry containing ACM diagnostic settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrAcmDiagEntry  

mwrAcmDiagIndex 1.3.6.1.4.1.7262.4.5.10.3.1.1.1
A unique value for each radio channel if applicable.
Status: current Access: not-accessible
OBJECT-TYPE    
  RadioInstanceType  

mwrAcmDiagnose 1.3.6.1.4.1.7262.4.5.10.3.1.1.2
This service effecting object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased. Poll the mwrAcmDiagnosticResult object to determine the results.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mwrAcmDiagnosticResult 1.3.6.1.4.1.7262.4.5.10.3.1.1.3
The result from ACM Diagnostic is read from this object.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrAcmConfigMismatch 1.3.6.1.4.1.7262.4.5.10.4.1
This notification is raised when ACM configuration mismatch between the link partners.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrAcmProfileLowered 1.3.6.1.4.1.7262.4.5.10.4.2
This notification is raised when system is executing ACM and working at a lower radio profile than the configured nominal radio profile.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrAcmProfileChanged 1.3.6.1.4.1.7262.4.5.10.4.3
This notification is raised when system is executing in ACM and has changed the radio profile.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrAtpcConfigurationsTable 1.3.6.1.4.1.7262.4.5.11.1.1
Table containing ATPC configurations.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrAtpcConfigurationsEntry

mwrAtpcConfigurationsEntry 1.3.6.1.4.1.7262.4.5.11.1.1.1
Table entry containing ATPC configurations.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrAtpcConfigurationsEntry  

mwrAtpcConfigIndex 1.3.6.1.4.1.7262.4.5.11.1.1.1.1
A unique value for each of the radio channel instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  RadioInstanceType  

mwrAtpcState 1.3.6.1.4.1.7262.4.5.11.1.1.1.2
Indicates whether the Adaptive Transmit Power Control (ATPC) feature is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrAtpcCoordinatedPower 1.3.6.1.4.1.7262.4.5.11.1.1.1.3
This object is the value at which the system will transmit if the ATPC and the coordinated power are enabled. This is only if the system is transmitting the maximum power for 5 minutes. The value is multiplied by 10. e.g. A display of 133 is actually 13.3 dB.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrAtpcCoordinatedPowerEnable 1.3.6.1.4.1.7262.4.5.11.1.1.1.4
Indicates whether Adaptive Transmit Power Control (ATPC) coordinated power option is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrAtpcMinTxPower 1.3.6.1.4.1.7262.4.5.11.1.1.1.5
Sets the minimum ATPC transmit power in dB x 10.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrAtpcMaxTxPower 1.3.6.1.4.1.7262.4.5.11.1.1.1.6
Sets the maximum ATPC transmit power in dB x 10. When ATPC is enabled, transmit power range will be between ATPC min. and ATPC max. power.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrAtpcRslTarget 1.3.6.1.4.1.7262.4.5.11.1.1.1.7
This object configures Received Signal Level that should be maintained by the link by adjusting the transmit power when ATPC is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrAtpcRslTargetUseDefault 1.3.6.1.4.1.7262.4.5.11.1.1.1.8
When this object is enabled the default RSL target will be used instead of the configured mwrAtpcRslTarget. The mwrAtpcDefaultRslTarget displays the default value.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrAtpcStatusTable 1.3.6.1.4.1.7262.4.5.11.2.1
A table containing ATPC status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrAtpcStatusEntry

mwrAtpcStatusEntry 1.3.6.1.4.1.7262.4.5.11.2.1.1
A table entry containing ATPC status.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrAtpcStatusEntry  

mwrAtpcStatusIndex 1.3.6.1.4.1.7262.4.5.11.2.1.1.1
A unique value for each of the radio instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  RadioInstanceType  

mwrAtpcRunningStatus 1.3.6.1.4.1.7262.4.5.11.2.1.1.2
Indicates the actual condition of ATPC: - disabled: Configuration is set to off. - disabledAuto: Feature was automatically disabled and is transmitting at coordinated power. - running: Feature is running normally. - runningToggling: Feature is toggling between maximum and minimum power to recover from a loss of mod sync. - suspended: Feature was suspended. - suspendedLostComm: Feature is suspended because communication is lost with peer ATPC. - suspendedRadioDown: Feature is suspended because the radio is down. - suspendedRadioMuted: Feature is suspended because the radio is muted. - suspendedRadioLoopback: Feature is suspended because the radio is in loopback mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), disabledAuto(2), running(3), runningToggling(4), suspended(5), suspendedLostComm(6), suspendedRadioDown(7), suspendedRadioMuted(8), suspendedRadioLoopback(9)  

mwrAtpcDefaultRslTarget 1.3.6.1.4.1.7262.4.5.11.2.1.1.3
This object is the default value of the Received Signal Level target when ATPC is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrAtpcActualMinTxPower 1.3.6.1.4.1.7262.4.5.11.2.1.1.4
This object indicates the running configuration for ATPC min tx power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrAtpcActualMaxTxPower 1.3.6.1.4.1.7262.4.5.11.2.1.1.5
This object indicates the running configuration for ATPC max tx power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrAtpcActualCoordinatedPower 1.3.6.1.4.1.7262.4.5.11.2.1.1.6
This value is the running configuration of the coordinated power. The value is multiplied by 10. e.g. A display of 133 is actually 13.3 dB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrAtpcPeerRslTarget 1.3.6.1.4.1.7262.4.5.11.2.1.1.7
This object is the peer Received Signal Level target when ATPC is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrAtpcMinRslTarget 1.3.6.1.4.1.7262.4.5.11.2.1.1.8
Represents the minimum RSL target value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrAtpcMaxRslTarget 1.3.6.1.4.1.7262.4.5.11.2.1.1.9
Represents the maximum RSL target value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrAtpcPeerRsl 1.3.6.1.4.1.7262.4.5.11.2.1.1.10
This object represents the peer actual RSL value. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dB. For example -352 is actually -35.2dB
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrAtpcConfigMismatch 1.3.6.1.4.1.7262.4.5.11.3.1
This notification is raised when ATPC configuration mismatch has occurred between link partners.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrAtpcAutoDisabled 1.3.6.1.4.1.7262.4.5.11.3.2
This notification is raised when ATPC is automatically disabled due to coordinated power condition. When this notification is raised the radio will be transmitting at coordinated power. The mwrAtpcStatusIndex varbind indicates the radio instance.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrBacRecordAvgPeriod 1.3.6.1.4.1.7262.4.5.13.1.1
Configures the average period used for computing the running average BAC gain and uncompressed ratio. Default average period is set to 10 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrBacTable 1.3.6.1.4.1.7262.4.5.13.1.2
Table containing Bandwidth Acceleration entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrBacEntry

mwrBacEntry 1.3.6.1.4.1.7262.4.5.13.1.2.1
Contains Bandwidth Acceleration entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrBacEntry  

mwrBacQIndex 1.3.6.1.4.1.7262.4.5.13.1.2.1.1
A unique value for each of the 8 radio egress Queues.
Status: current Access: not-accessible
OBJECT-TYPE    
  QueueType  

mwrBacQEnable 1.3.6.1.4.1.7262.4.5.13.1.2.1.2
Configure queue compression state to disable/enable.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrBacQBlockSize 1.3.6.1.4.1.7262.4.5.13.1.2.1.3
Configure queue compression block size (256...8000). Block size has to be in increments of 64 bytes. Otherwise it will be rounded off to nearest 64 bytes. Valid block sizes are <256 512 1024 4032 8000>
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrBacRecordLogging 1.3.6.1.4.1.7262.4.5.13.1.2.1.4
Enables/disables logging of BAC related statistics like Maximum BAC gain and Maximum uncompressed ratio on a per queue basis to syslog and flashlog.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrHcQTable 1.3.6.1.4.1.7262.4.5.13.1.3
A table containing Header Compression settings for each queue, the configuration corresponds to the egress QoS of radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrHcQEntry

mwrHcQEntry 1.3.6.1.4.1.7262.4.5.13.1.3.1
A table entry containing Header Compression settings for each queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrHcQEntry  

mwrHcQIndex 1.3.6.1.4.1.7262.4.5.13.1.3.1.1
Specifies Header Compression queue index for each radio queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  QueueType  

mwrHcQ1 1.3.6.1.4.1.7262.4.5.13.1.3.1.2
Enables or disables the Header Compression on queue 1.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrHcQ2 1.3.6.1.4.1.7262.4.5.13.1.3.1.3
Enables or disables the Header Compression on queue 2.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrHcQ3 1.3.6.1.4.1.7262.4.5.13.1.3.1.4
Enables or disables the Header Compression on queue 3.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrHcQ4 1.3.6.1.4.1.7262.4.5.13.1.3.1.5
Enables or disables the Header Compression on queue 4.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrHcQ5 1.3.6.1.4.1.7262.4.5.13.1.3.1.6
Enables or disables the Header Compression on queue 5.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrHcQ6 1.3.6.1.4.1.7262.4.5.13.1.3.1.7
Enables or disables the Header Compression on queue 6.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrHcQ7 1.3.6.1.4.1.7262.4.5.13.1.3.1.8
Enables or disables the Header Compression on queue 7.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrHcQ8 1.3.6.1.4.1.7262.4.5.13.1.3.1.9
Enables or disables the Header Compression on queue 8.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrHcQRowStatus 1.3.6.1.4.1.7262.4.5.13.1.3.1.10
The Header Compression table Row Status. This object is used to apply Header Compression settings for all queues simultaneously.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

mwrBacStatusTable 1.3.6.1.4.1.7262.4.5.13.2.1
Table containing Bandwidth Acceleration status entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrBacStatusEntry

mwrBacStatusEntry 1.3.6.1.4.1.7262.4.5.13.2.1.1
Contains Bandwidth Acceleration status entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrBacStatusEntry  

mwrBacStatusQIndex 1.3.6.1.4.1.7262.4.5.13.2.1.1.1
A unique value for each of the 8 Queues.
Status: current Access: not-accessible
OBJECT-TYPE    
  QueueType  

mwrBacUncompressedRatio 1.3.6.1.4.1.7262.4.5.13.2.1.1.2
Running average Uncompressed ratio is calculated by collecting n samples of bytes uncompressed and bytes in to queue over specified average period in percentage.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrBacGain 1.3.6.1.4.1.7262.4.5.13.2.1.1.3
The Running Average BAC gain is the sum of all bytes getting into the compressor divided by the sum of all compressed and uncompressed bytes calculated over an average period.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrEventConfigTable 1.3.6.1.4.1.7262.4.5.14.1.1
A table of alarm configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrEventConfigEntry

mwrEventConfigEntry 1.3.6.1.4.1.7262.4.5.14.1.1.1
An entry of alarm configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrEventConfigEntry  

mwrEventConfigIndex 1.3.6.1.4.1.7262.4.5.14.1.1.1.1
A unique value for each alarm.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

mwrEventInstanceIndex 1.3.6.1.4.1.7262.4.5.14.1.1.1.2
A unique value for each instance of an alarm.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mwrEventConfigSeverity 1.3.6.1.4.1.7262.4.5.14.1.1.1.3
The severity of the alarm as minor, major or critical.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(0), warning(1), minor(2), major(3), critical(4)  

mwrEventName 1.3.6.1.4.1.7262.4.5.14.1.1.1.4
Represents the event name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrAlarmConfigState 1.3.6.1.4.1.7262.4.5.14.1.1.1.5
The state of the alarm which can be either enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrTrapConfigState 1.3.6.1.4.1.7262.4.5.14.1.1.1.6
The state of the trap which can be either enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrLogEventState 1.3.6.1.4.1.7262.4.5.14.1.1.1.7
This object is used to enable or disable logging the events.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrEventLogEnable 1.3.6.1.4.1.7262.4.5.15.1.1
Indicates whether event log is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrPerfmLogEnable 1.3.6.1.4.1.7262.4.5.15.1.2
Indicates whether performance log is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrPerfmLogInterval 1.3.6.1.4.1.7262.4.5.15.1.3
Performance statistics are logged periodically by this interval. The interval can be up to 00:15:00 (15 minutes) and as short as 00:00:1 (1 seconds).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

mwrSysLogServerTable 1.3.6.1.4.1.7262.4.5.15.1.4
The syslog server table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrSysLogServerEntry

mwrSysLogServerEntry 1.3.6.1.4.1.7262.4.5.15.1.4.1
The syslog server table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrSysLogServerEntry  

mwrSysLogServerIndex 1.3.6.1.4.1.7262.4.5.15.1.4.1.1
The syslog server table index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..5  

mwrSysLogEnable 1.3.6.1.4.1.7262.4.5.15.1.4.1.2
Indicates whether sys log is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnableType  

mwrSysLogHostDomain 1.3.6.1.4.1.7262.4.5.15.1.4.1.3
Indicates sys log host inet address type. Valid types are ipv4 or ipv6.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

mwrSysLogHostAddress 1.3.6.1.4.1.7262.4.5.15.1.4.1.4
Indicates sys log host inet address octet string.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

mwrPmRspiThresholdTable 1.3.6.1.4.1.7262.4.5.16.1.1
Performance Monitoring table for Radio Synchronous Physical Interface thresholds.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrPmRspiThresholdEntry

mwrPmRspiThresholdEntry 1.3.6.1.4.1.7262.4.5.16.1.1.1
Contains entries for Radio Synchronous Physical Interface thresholds.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrPmRspiThresholdEntry  

mwrPmRspiThrIndex 1.3.6.1.4.1.7262.4.5.16.1.1.1.1
Index to PM RSPI Threshold table.
Status: current Access: not-accessible
OBJECT-TYPE    
  RadioInstanceType  

mwrPmRLT1 1.3.6.1.4.1.7262.4.5.16.1.1.1.2
Receive Level Threshold 1, represents the value of the first received power level threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmRLT2 1.3.6.1.4.1.7262.4.5.16.1.1.1.3
Receive Level Threshold 2, represents the value of the second received power level threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmRLT3 1.3.6.1.4.1.7262.4.5.16.1.1.1.4
Receive Level Threshold 3, represents the value of the third received power level threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmRLT4 1.3.6.1.4.1.7262.4.5.16.1.1.1.5
Receive Level Threshold 4, represents the value of the fourth received power level threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmTLT1 1.3.6.1.4.1.7262.4.5.16.1.1.1.6
Transmit Level Threshold 1, represents the value of the first transmitted power level threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmTLT2 1.3.6.1.4.1.7262.4.5.16.1.1.1.7
Transmit Level Threshold 2, represents the value of the second transmitted power level threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmRspiThrRowStatus 1.3.6.1.4.1.7262.4.5.16.1.1.1.8
This object is used for applying all RSPI thresholds simultaneously. Set RowStatus to NotInService, make changes to all or some threshold values and then change RowStatus back to Active.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

mwrPmBwThresholdTable 1.3.6.1.4.1.7262.4.5.16.1.2
Performance monitoring out bandwidth utilization thresholds table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrPmBwThresholdEntry

mwrPmBwThresholdEntry 1.3.6.1.4.1.7262.4.5.16.1.2.1
Contains entries for performance monitoring out bandwidth utilization thresholds.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrPmBwThresholdEntry  

mwrPmBWThrIndex 1.3.6.1.4.1.7262.4.5.16.1.2.1.1
Index to PM out BW Threshold table. Index 1 represents the radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

mwrPmBWT1 1.3.6.1.4.1.7262.4.5.16.1.2.1.2
The performance monitoring out BW utilization threshold 1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmBWT2 1.3.6.1.4.1.7262.4.5.16.1.2.1.3
The performance monitoring out BW utilization threshold 2.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmBWT3 1.3.6.1.4.1.7262.4.5.16.1.2.1.4
The performance monitoring out BW utilization threshold 3.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmBWT4 1.3.6.1.4.1.7262.4.5.16.1.2.1.5
The performance monitoring out BW utilization threshold 4.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmBWT5 1.3.6.1.4.1.7262.4.5.16.1.2.1.6
The performance monitoring out BW utilization threshold 5.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmBWT6 1.3.6.1.4.1.7262.4.5.16.1.2.1.7
The performance monitoring out BW utilization threshold 6.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmBWT7 1.3.6.1.4.1.7262.4.5.16.1.2.1.8
The performance monitoring out BW utilization threshold 7.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmBWT8 1.3.6.1.4.1.7262.4.5.16.1.2.1.9
The performance monitoring out BW utilization threshold 8.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmBWT9 1.3.6.1.4.1.7262.4.5.16.1.2.1.10
The performance monitoring out BW utilization threshold 9.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmBWT10 1.3.6.1.4.1.7262.4.5.16.1.2.1.11
The performance monitoring out BW utilization threshold 10.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmBWTRowStatus 1.3.6.1.4.1.7262.4.5.16.1.2.1.12
This object is used for applying all PM bandwidth threshold settings simultaneously. Set RowStatus to NotInService, make changes to all or some threshold values and then change RowStatus back to Active.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

mwrPmTpThresholdTable 1.3.6.1.4.1.7262.4.5.16.1.3
Performance monitoring throughput thresholds table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrPmTpThresholdEntry

mwrPmTpThresholdEntry 1.3.6.1.4.1.7262.4.5.16.1.3.1
Contains entries for performance monitoring throughput thresholds.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrPmTpThresholdEntry  

mwrPmTPThrIndex 1.3.6.1.4.1.7262.4.5.16.1.3.1.1
Index to PM throughput Threshold table. Index 1 represents the radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

mwrPmTPT1 1.3.6.1.4.1.7262.4.5.16.1.3.1.2
The performance monitoring throughput threshold 1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmTPT2 1.3.6.1.4.1.7262.4.5.16.1.3.1.3
The performance monitoring throughput threshold 2.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmTPT3 1.3.6.1.4.1.7262.4.5.16.1.3.1.4
The performance monitoring throughput threshold 3.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmTPT4 1.3.6.1.4.1.7262.4.5.16.1.3.1.5
The performance monitoring throughput threshold 4.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmTPT5 1.3.6.1.4.1.7262.4.5.16.1.3.1.6
The performance monitoring throughput threshold 5.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmTPT6 1.3.6.1.4.1.7262.4.5.16.1.3.1.7
The performance monitoring throughput threshold 6.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmTPT7 1.3.6.1.4.1.7262.4.5.16.1.3.1.8
The performance monitoring throughput threshold 7.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmTPT8 1.3.6.1.4.1.7262.4.5.16.1.3.1.9
The performance monitoring throughput threshold 8.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmTPT9 1.3.6.1.4.1.7262.4.5.16.1.3.1.10
The performance monitoring throughput threshold 9.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmTPT10 1.3.6.1.4.1.7262.4.5.16.1.3.1.11
The performance monitoring throughput threshold 10.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmTPTRowStatus 1.3.6.1.4.1.7262.4.5.16.1.3.1.12
This object is used for applying all PM throughput threshold settings simultaneously. Set RowStatus to NotInService, make changes to all or some threshold values and then change RowStatus back to Active.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

mwrPmAdvThresholdTable 1.3.6.1.4.1.7262.4.5.16.1.4
The advanced performance monitoring thresholds table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrPmAdvThresholdEntry

mwrPmAdvThresholdEntry 1.3.6.1.4.1.7262.4.5.16.1.4.1
The advanced performance monitoring thresholds entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrPmAdvThresholdEntry  

mwrPmAdvThrIndex 1.3.6.1.4.1.7262.4.5.16.1.4.1.1
The advanced performance monitoring thresholds table index. Index 1 represents the radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

mwrPmAdvTxHitsT1 1.3.6.1.4.1.7262.4.5.16.1.4.1.2
The advanced performance monitoring Tx hits threshold 1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmAdvRxHitsT1 1.3.6.1.4.1.7262.4.5.16.1.4.1.3
The advanced performance monitoring Rx hits threshold 1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mwrPmAdvRowStatus 1.3.6.1.4.1.7262.4.5.16.1.4.1.4
This object is used for applying all PM advanced threshold settings simultaneously. Set RowStatus to NotInService, make changes to all threshold values and then change back RowStatus to Active.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

mwrPmRspiTable 1.3.6.1.4.1.7262.4.5.16.2.1
Performance Monitoring table for Radio Synchronous Physical Interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrPmRspiEntry

mwrPmRspiEntry 1.3.6.1.4.1.7262.4.5.16.2.1.1
Contains information for Radio Synchronous Physical Interface. The table is indexed by the granularity period and by the interval number. 22 rows are always presents, 20 are the historical measurements for 16 intervals in the quarter granularity and 4 intervals in the 24 hours granularity period. 2 rows represent the current measures.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrPmRspiEntry  

mwrPmRspiStatusIndex 1.3.6.1.4.1.7262.4.5.16.2.1.1.1
A unique value for each of the radio instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  RadioInstanceType  

mwrPmRspiInterval 1.3.6.1.4.1.7262.4.5.16.2.1.1.2
The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  PMIntervalType  

mwrPmRspiIntervalID 1.3.6.1.4.1.7262.4.5.16.2.1.1.3
The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16  

mwrPmRspiMeasSuspect 1.3.6.1.4.1.7262.4.5.16.2.1.1.4
Any problem that invalidates the measurement.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mwrPmRspiMeasIntervalStatus 1.3.6.1.4.1.7262.4.5.16.2.1.1.5
An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

mwrPmRspiMeasTimeLength 1.3.6.1.4.1.7262.4.5.16.2.1.1.6
The interval duration in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmRspiMeasTLTMMin 1.3.6.1.4.1.7262.4.5.16.2.1.1.7
The transmitted power level tide mark low value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmRspiMeasTLTMMax 1.3.6.1.4.1.7262.4.5.16.2.1.1.8
The transmitted power level tide mark high value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmRspiMeasTLTS1 1.3.6.1.4.1.7262.4.5.16.2.1.1.9
The number of seconds above the first transmitted power level threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmRspiMeasTLTS2 1.3.6.1.4.1.7262.4.5.16.2.1.1.10
The number of seconds above the second transmitted power level threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmRspiMeasRLTMMin 1.3.6.1.4.1.7262.4.5.16.2.1.1.11
The received power level tide mark low value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmRspiMeasRLTMMax 1.3.6.1.4.1.7262.4.5.16.2.1.1.12
The received power level tide mark high value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmRspiMeasRLTS1 1.3.6.1.4.1.7262.4.5.16.2.1.1.13
The number of seconds below the first received power level threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmRspiMeasRLTS2 1.3.6.1.4.1.7262.4.5.16.2.1.1.14
The number of seconds below the second received power level threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmRspiMeasRLTS3 1.3.6.1.4.1.7262.4.5.16.2.1.1.15
The number of seconds below the third received power level threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmRspiMeasRLTS4 1.3.6.1.4.1.7262.4.5.16.2.1.1.16
The number of seconds below the fourth received power level threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmBWTable 1.3.6.1.4.1.7262.4.5.16.2.2
Table containing performance monitoring measurements in 15 min and 24 hrs intervals for out BW utilization.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrPmBWEntry

mwrPmBWEntry 1.3.6.1.4.1.7262.4.5.16.2.2.1
Table entries containing performance monitoring measurements in 15 min and 24 hrs intervals for out BW utilization.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrPmBWEntry  

mwrPmBWStatusIndex 1.3.6.1.4.1.7262.4.5.16.2.2.1.1
The performance monitoring out BW utilization measurements table index. Index 1 represents the radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

mwrPmBWInterval 1.3.6.1.4.1.7262.4.5.16.2.2.1.2
The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  PMIntervalType  

mwrPmBWIntervalID 1.3.6.1.4.1.7262.4.5.16.2.2.1.3
The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16  

mwrPmBWMeasSuspect 1.3.6.1.4.1.7262.4.5.16.2.2.1.4
Any problem that invalidates the measurement.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mwrPmBWMeasIntervalStatus 1.3.6.1.4.1.7262.4.5.16.2.2.1.5
An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

mwrPmBWMeasTimeLength 1.3.6.1.4.1.7262.4.5.16.2.2.1.6
The interval duration in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasBWTS1 1.3.6.1.4.1.7262.4.5.16.2.2.1.7
The number of seconds above the first BW utilization threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasBWTS2 1.3.6.1.4.1.7262.4.5.16.2.2.1.8
The number of seconds above the second BW utilization threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasBWTS3 1.3.6.1.4.1.7262.4.5.16.2.2.1.9
The number of seconds above the third BW utilization threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasBWTS4 1.3.6.1.4.1.7262.4.5.16.2.2.1.10
The number of seconds above the fourth BW utilization threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasBWTS5 1.3.6.1.4.1.7262.4.5.16.2.2.1.11
The number of seconds above the fifth BW utilization threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasBWTS6 1.3.6.1.4.1.7262.4.5.16.2.2.1.12
The number of seconds above the sixth BW utilization threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasBWTS7 1.3.6.1.4.1.7262.4.5.16.2.2.1.13
The number of seconds above the seventh BW utilization threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasBWTS8 1.3.6.1.4.1.7262.4.5.16.2.2.1.14
The number of seconds above the eighth BW utilization threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasBWTS9 1.3.6.1.4.1.7262.4.5.16.2.2.1.15
The number of seconds above the ninth BW utilization threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasBWTS10 1.3.6.1.4.1.7262.4.5.16.2.2.1.16
The number of seconds above the tenth BW utilization threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmTPTable 1.3.6.1.4.1.7262.4.5.16.2.3
Table containing performance monitoring measurements in 15 min and 24 hrs intervals for throughput.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrPmTPEntry

mwrPmTPEntry 1.3.6.1.4.1.7262.4.5.16.2.3.1
Table entry containing performance monitoring throughput measurements in 15 min and 24 hrs intervals.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrPmTPEntry  

mwrPmTPStatusIndex 1.3.6.1.4.1.7262.4.5.16.2.3.1.1
The performance monitoring throughput measurements table index. Index 1 represents the radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

mwrPmTPInterval 1.3.6.1.4.1.7262.4.5.16.2.3.1.2
The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  PMIntervalType  

mwrPmTPIntervalID 1.3.6.1.4.1.7262.4.5.16.2.3.1.3
The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16  

mwrPmTPMeasSuspect 1.3.6.1.4.1.7262.4.5.16.2.3.1.4
Any problem that invalidates the measurement.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mwrPmTPMeasIntervalStatus 1.3.6.1.4.1.7262.4.5.16.2.3.1.5
An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

mwrPmTPMeasTimeLength 1.3.6.1.4.1.7262.4.5.16.2.3.1.6
The interval duration in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasTPTS1 1.3.6.1.4.1.7262.4.5.16.2.3.1.7
The number of seconds above the first throughput threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasTPTS2 1.3.6.1.4.1.7262.4.5.16.2.3.1.8
The number of seconds above the second throughput threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasTPTS3 1.3.6.1.4.1.7262.4.5.16.2.3.1.9
The number of seconds above the third throughput threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasTPTS4 1.3.6.1.4.1.7262.4.5.16.2.3.1.10
The number of seconds above the fourth throughput threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasTPTS5 1.3.6.1.4.1.7262.4.5.16.2.3.1.11
The number of seconds above the fifth throughput threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasTPTS6 1.3.6.1.4.1.7262.4.5.16.2.3.1.12
The number of seconds above the sixth throughput threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasTPTS7 1.3.6.1.4.1.7262.4.5.16.2.3.1.13
The number of seconds above the seventh throughput threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasTPTS8 1.3.6.1.4.1.7262.4.5.16.2.3.1.14
The number of seconds above the eighth throughput threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasTPTS9 1.3.6.1.4.1.7262.4.5.16.2.3.1.15
The number of seconds above the ninth throughput threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmMeasTPTS10 1.3.6.1.4.1.7262.4.5.16.2.3.1.16
The number of seconds above the tenth throughput threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmAdvTable 1.3.6.1.4.1.7262.4.5.16.2.4
The advanced performance monitoring measurements table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrPmAdvEntry

mwrPmAdvEntry 1.3.6.1.4.1.7262.4.5.16.2.4.1
The advanced performance monitoring measurements table entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrPmAdvEntry  

mwrPmAdvStatusIndex 1.3.6.1.4.1.7262.4.5.16.2.4.1.1
The advanced performance monitoring measurements table index. Index 1 represents the radio port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

mwrPmAdvInterval 1.3.6.1.4.1.7262.4.5.16.2.4.1.2
The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  PMIntervalType  

mwrPmAdvIntervalID 1.3.6.1.4.1.7262.4.5.16.2.4.1.3
The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16  

mwrPmAdvMeasSuspect 1.3.6.1.4.1.7262.4.5.16.2.4.1.4
Any problem that invalidates the measurement.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mwrPmAdvMeasIntervalStatus 1.3.6.1.4.1.7262.4.5.16.2.4.1.5
An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

mwrPmAdvMeasTimeLength 1.3.6.1.4.1.7262.4.5.16.2.4.1.6
The interval duration in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmAdvTxCapPeak 1.3.6.1.4.1.7262.4.5.16.2.4.1.7
The number of bits per second peak transmitted capacity during the time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmAdvTxCapRatio 1.3.6.1.4.1.7262.4.5.16.2.4.1.8
The percentage of peak transmitted capacity referred to the total allowed capacity during the time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmAdvTxCapAvg 1.3.6.1.4.1.7262.4.5.16.2.4.1.9
The number of bits per second average transmitted capacity during the time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmAdvTxCapAvgRatio 1.3.6.1.4.1.7262.4.5.16.2.4.1.10
The percentage of average transmitted capacity during the time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmAdvTxCapHits 1.3.6.1.4.1.7262.4.5.16.2.4.1.11
The number of seconds where the transmitted capacity has overcome a configurable threshold during the time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmAdvRxCapPeak 1.3.6.1.4.1.7262.4.5.16.2.4.1.12
The number of bits per second peak received capacity during the time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmAdvRxCapRatio 1.3.6.1.4.1.7262.4.5.16.2.4.1.13
The percentage of peak received capacity referred to the total allowed capacity during the time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmAdvRxCapAvg 1.3.6.1.4.1.7262.4.5.16.2.4.1.14
The number of bits per second average received capacity during the time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrPmAdvRxCapHits 1.3.6.1.4.1.7262.4.5.16.2.4.1.15
The number of seconds where the received capacity has overcome a configurable threshold during the time interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mwrUserSessionTable 1.3.6.1.4.1.7262.4.5.17.2.1
A table of user sessions
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MwrUserSessionEntry

mwrUserSessionEntry 1.3.6.1.4.1.7262.4.5.17.2.1.1
User session entry
Status: current Access: not-accessible
OBJECT-TYPE    
  MwrUserSessionEntry  

mwrUserIndex 1.3.6.1.4.1.7262.4.5.17.2.1.1.1
A unique value for each user.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER user1(1), user2(2), user3(3), user4(4), user5(5), user6(6), user7(7), user8(8), user9(9), user10(10), user11(11), user12(12), user13(13), user14(14), user15(15), user16(16), user17(17), user18(18), user19(19), user20(20)  

mwrUserName 1.3.6.1.4.1.7262.4.5.17.2.1.1.2
The username of a management session using Telnet or HTTP. The session state variable must be checked to determine if the management session is currently in progress.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

mwrUserConnectionType 1.3.6.1.4.1.7262.4.5.17.2.1.1.3
Either telnet, ssh, http or https. Ethernet connection may be through any physical port(s) dedicated to management of the equipment.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mwrUserConnectionState 1.3.6.1.4.1.7262.4.5.17.2.1.1.4
The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of the system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER informationNotAvailable(1), sessionTerminated(2), sessionInProgress(3)  

mwrUserSession 1.3.6.1.4.1.7262.4.5.17.3.1
This notification is raised when a change in the state of user access is recognized, a new user has logged in or an existing user has logged out.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrUserLoginFailed 1.3.6.1.4.1.7262.4.5.17.3.2
This notification is raised when a user has failed to login.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrUserAccountChanged 1.3.6.1.4.1.7262.4.5.17.3.3
This notification is raised when a change in user account information in the system is detected.
Status: current Access: read-only
NOTIFICATION-TYPE    

mwrUserPasswordChanged 1.3.6.1.4.1.7262.4.5.17.3.4
This notification is raised when a user password has changed.
Status: current Access: read-only
NOTIFICATION-TYPE