MRV-IN-REACH-PARAM-CLIENT-MIB

File: MRV-IN-REACH-PARAM-CLIENT-MIB.mib (21880 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
MRV-IN-REACH-PRODUCT-DIVISION-MIB

Imported symbols

Counter DisplayString OBJECT-TYPE
mrvInReachProductDivision DateTime AddressType

Defined Types

ParamServerEntry  
SEQUENCE    
  paramServerName DisplayString
  paramServerEntryStatus INTEGER
  paramServerAddressType AddressType
  paramServerAddress STRING
  paramServerStoredVersion INTEGER
  paramServerStoredTime DateTime
  paramServerStoredStatus INTEGER
  paramServerStoredFailure INTEGER

Defined Values

xParamClient 1.3.6.1.4.1.33.7
OBJECT IDENTIFIER    

paramClientLoaderName 1.3.6.1.4.1.33.7.1
The name of the system that most recently provided this system's stored parameters. Corresponds directly to the name value labeled 'Loaded From:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  DisplayString  

paramClientLoaderAddressType 1.3.6.1.4.1.33.7.2
The type of network address contained in paramClientLoaderAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' means there is no address and parameters were loaded from local storage. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. Corresponds indirectly to the address value labeled 'Loaded From:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  AddressType  

paramClientLoaderAddress 1.3.6.1.4.1.33.7.3
The network address of the system that most recently provided this system's stored parameters. Corresponds directly to the address value labeled 'Loaded From:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  STRING  

paramClientParameterVersion 1.3.6.1.4.1.33.7.4
The version number of the parameters as stored in this system's local memory. Corresponds directly to SERVER PARAMETER VERSION and the value labeled 'Last Update Version:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  INTEGER  

paramClientUpdateTime 1.3.6.1.4.1.33.7.5
This system's local date and time when it last attempted to store parameters with a parameter server. Corresponds directly to the values labeled 'Last Update Date:' and 'Last Update Time:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  DateTime  

paramClientServerCheck 1.3.6.1.4.1.33.7.6
Control over whether or not this system is allowed to check for additional parameter servers. 'enabled' allows checking. Corresponds directly to PARAMETER SERVER CHECK and the presence of PARAMETER POLLING under the label 'Enabled Characteristics' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

paramClientCheckInterval 1.3.6.1.4.1.33.7.7
The number of minutes between checks for additional parameter servers. Corresponds directly to PARAMETER SERVER CHECK TIMER and the value labeled 'Check Timer:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  INTEGER 1..120  

paramClientCheckNow 1.3.6.1.4.1.33.7.8
Control to cause this system to immediately check for additional parameter servers. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes a check to be started. Corresponds to the CHECK PARAMETER SERVER command.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

paramClientServerLimit 1.3.6.1.4.1.33.7.9
The maximum number of parameter servers this system is allowed to remember at the same time. Corresponds directly to PARAMETER SERVER LIMIT and the value labeled 'Parameter Server Limit:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  INTEGER 1..8  

paramClientRetransmitInterval 1.3.6.1.4.1.33.7.10
The number of minutes between this system's attempts to store new parameters with a server that has not acknowledged previous attempts. Corresponds directly to PARAMETER SERVER RETRANSMIT TIMER and the value labeled 'Retransmit Timer: in the PARAMETER SERVER display.
OBJECT-TYPE    
  INTEGER 1..30  

paramClientRetransmitLimit 1.3.6.1.4.1.33.7.11
The maximum number of attempts by this system to store new parameters with a server that has not acknowledged previous attempts. Corresponds directly to PARAMETER SERVER RETRANSMIT LIMIT and the value labeled 'Retransmit Limit:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  INTEGER 1..100  

paramClientState 1.3.6.1.4.1.33.7.12
This system's state with regard to update attempts. The value meanings are: other none of the following idle no update in progress internal internal state of no meaning to manager hold holding to keep from updating too often retry waiting to retry after failure Corresponds directly to the value labeled 'Storage State:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  INTEGER other(1), idle(2), internal1(3), internal2(4), internal3(5), internal4(6), internal5(7), internal6(8), internal7(9), internal8(10), hold(11), retry(12)  

paramClientProtocolErrors 1.3.6.1.4.1.33.7.13
The number of invalid parameter service protocol messages received by this system. Corresponds directly to the value labeled 'Bad Parameter Messages:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  Counter  

paramClientServerRejects 1.3.6.1.4.1.33.7.14
The number of parameter servers this system rejected due to exceeding paramClientServerLimit. Corresponds directly to the value labeled 'Rejected Servers:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  Counter  

paramClientServerNumber 1.3.6.1.4.1.33.7.15
The number of parameter servers known to this system, indicating the number of entries in serverTable. Corresponds directly to the value labeled 'Parameter Servers:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  INTEGER  

paramServerTable 1.3.6.1.4.1.33.7.16
A list of parameter server entries. The number of entries is given by the value of paramClientServerNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    ParamServerEntry

paramServerEntry 1.3.6.1.4.1.33.7.16.1
Status and parameter values for a parameter server.
OBJECT-TYPE    
  ParamServerEntry  

paramServerName 1.3.6.1.4.1.33.7.16.1.1
The server's name, unique within this system. Always 16 characters, null padded on the end. Corresponds directly to the name used to create the entry and the value labeled 'Name' in the PARAMETER SERVER display.
OBJECT-TYPE    
  DisplayString Size(16)  

paramServerEntryStatus 1.3.6.1.4.1.33.7.16.1.2
The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the CLEAR/PURGE PARAMETER SERVER command. Actual removal of the entry is implementation specific.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

paramServerAddressType 1.3.6.1.4.1.33.7.16.1.3
The type of network address contained in paramServerAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' means there is no address and parameters were loaded from local storage. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. Corresponds indirectly to the value labeled 'Address' in the PARAMETER SERVER display.
OBJECT-TYPE    
  AddressType  

paramServerAddress 1.3.6.1.4.1.33.7.16.1.4
The server's network address. Corresponds directly to the value labeled 'Address' in the PARAMETER SERVER display.
OBJECT-TYPE    
  STRING  

paramServerStoredVersion 1.3.6.1.4.1.33.7.16.1.5
Parameter version number currently stored at the server. Corresponds directly to the value labeled 'Version' in the PARAMETER SERVER display.
OBJECT-TYPE    
  INTEGER  

paramServerStoredTime 1.3.6.1.4.1.33.7.16.1.6
The server's date and time when it stored the parameters of version paramServerStoredVersion. Corresponds directly to the value labeled 'Date' in the PARAMETER SERVER display.
OBJECT-TYPE    
  DateTime  

paramServerStoredStatus 1.3.6.1.4.1.33.7.16.1.7
Status of this system's parameters with respect to the server. Corresponds directly to the value labeled 'Status' in the PARAMETER SERVER display. The value meanings are: ahead server version newer than system's behind server version older than system's current up to date failed system no longer attempting update failing system trying to update but failing query attempting to determine version noMemCard no memory card in card drive unknown version not known
OBJECT-TYPE    
  INTEGER unknown(1), current(2), ahead(3), behind(4), failing(5), failed(6), query(7), noMemCard(8)  

paramServerStoredFailure 1.3.6.1.4.1.33.7.16.1.8
When paramServerStoredStatus is 'failed' or 'failing', the reason for the most recent failure. Corresponds directly to the value labeled 'Reason' in the PARAMETER SERVER display. The value meanings are: other none of the following none no failure protocolOut invalid protocol message to server open file open error at server read file read error at server write file write error at server resource resource lack at server (e.g. disk) protocolIn invalid protocol message from server response no response from server close file close error at server delete file delete error at server rename file rename error at server fileData bad parameter data stored at server
OBJECT-TYPE    
  INTEGER other(1), none(2), protocolOut(3), open(4), read(5), write(6), resource(7), protocolIn(8), response(9), close(10), delete(11), rename(12), fileData(13)  

paramClientPath 1.3.6.1.4.1.33.7.17
The directory path to the parameter file on all servers. Corresponds directly to PARAMETER SERVER PATH and the value labeled 'Path:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  DisplayString Size(0..40)  

paramClientChassisStorageState 1.3.6.1.4.1.33.7.18
The status of the current attempt to update parameters in local chassis storage. Corresponds directly to the value labeled 'Chassis Configuration:'.
OBJECT-TYPE    
  INTEGER notApplicable(1), unknown(2), current(3), verifying(4), busBusy(5), retrying(6), failing(7), behind(8)  

paramClientTftpBroadcast 1.3.6.1.4.1.33.7.20
Control over whether or not this system is allowed to send out a TFTP read broadcast after sending a BOOTP broadcast during the Parameter Check Function. 'enabled' allows TFTP broadcast. Corresponds directly to the presence of PARAMETER TFTP BROADCAST under the label 'Enabled Characteristics' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

paramClientWriteNow 1.3.6.1.4.1.33.7.21
Control to start saving parameters immediately in response to an execute. Corresponds directly to the WRITE PARAMETERS command. In response to a get-request or get-next-request, the agent always returns 'ready' for this value.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)