MMB-COM-MIB

File: MMB-COM-MIB.mib (123918 bytes)

Imported modules

RFC-1212	RFC-1215	RFC1213-MIB
RFC1155-SMI	INET-ADDRESS-MIB

Imported symbols

OBJECT-TYPE	TRAP-TYPE	mib-2
DisplayString	PhysAddress	TimeTicks
Counter	Gauge	IpAddress
mgmt	enterprises	InetAddressType
InetAddress

Defined Types

TrueFalse
INTEGER	false(1), true(2)

TrueFalseUnknown
INTEGER	false(1), true(2), unknown(3)

Units
SEQUENCE
	uUnitId	INTEGER
	unitClass	INTEGER
	unitCainetNr	INTEGER
	unitDesignation	DisplayString
	unitModelName	DisplayString
	unitManufacturer	DisplayString
	unitSerialNumber	DisplayString
	unitLocation	DisplayString
	unitContact	DisplayString
	unitAdminURL	DisplayString
	frontDoorStatus	INTEGER
	housingOpenStatus	INTEGER
	msgLogLanguages	DisplayString
	unitWorldWideName	DisplayString
	remcsId	DisplayString
	assetTag	DisplayString
	unitManagementIpAddress	DisplayString
	unitManagementIpAddressV6	DisplayString

UnitParents
SEQUENCE
	pUnitId	INTEGER
	pParentNr	INTEGER
	parentUnit	INTEGER
	parentUnitClass	INTEGER

UnitChilds
SEQUENCE
	cUnitId	INTEGER
	cChildNr	INTEGER
	childUnit	INTEGER
	childUnitClass	INTEGER

ManagementNodes
SEQUENCE
	mnUnitId	INTEGER
	mnNodeNr	INTEGER
	unitNodeIfType	INTEGER
	unitNodeAddress	DisplayString
	unitNodeIpNetmask	DisplayString
	unitNodeGateway	DisplayString
	unitNodeName	DisplayString
	unitNodeClass	INTEGER
	unitNodeMacAddress	PhysAddress
	unitNodeUseDHCP	INTEGER
	unitNodeControllerType	DisplayString
	unitNodeControllerModel	DisplayString
	unitNodeControllerFWVersion	DisplayString

ManagementProcessors
SEQUENCE
	spUnitId	INTEGER
	spProcessorNr	INTEGER
	spModelName	DisplayString
	spFirmwareVersion	DisplayString
	spBatteryStatus	INTEGER
	spBatteryDischargeTime	INTEGER
	spTimeOnBattery	Counter
	spDoBatteryChargeCycle	INTEGER
	spBatteryChargeLevel	Gauge

ManagementUpsNodes
SEQUENCE
	upsUnitId	INTEGER
	upsNr	INTEGER
	upsVendorName	DisplayString
	upsModelName	DisplayString
	upsIpAddress	DisplayString
	upsMibRoot	DisplayString
	upsSnmpCommunity	DisplayString
	upsHttpPort	INTEGER

Servers
SEQUENCE
	srvUnitId	INTEGER
	srvPhysicalMemory	INTEGER
	srvLastBootResult	INTEGER
	srvCurrentBootStatus	INTEGER
	srvShutdownCommand	INTEGER
	srvShutdownDelay	INTEGER
	srvUUID	DisplayString
	srvPhysicalMemoryOs	INTEGER
	srvTpmMode	INTEGER
	srvManagementIP	DisplayString

UnitPowerOnOff
SEQUENCE
	ooUnitId	INTEGER
	powerOnOffStatus	INTEGER
	lastPowerOffSource	INTEGER
	lastPowerOnSource	INTEGER
	lastPowerOnTime	INTEGER
	powerOnCounts	INTEGER
	powerOnDuration	INTEGER
	powerOffDuration	INTEGER
	powerFailRecovery	INTEGER
	powerCommand	INTEGER
	powerSupplyRedundancy	INTEGER

Performance
SEQUENCE
	perfUnitId	INTEGER
	perfNr	INTEGER
	perfType	INTEGER
	performanceValue	Gauge
	performanceName	DisplayString

TimerOnOff
SEQUENCE
	tooUnitId	INTEGER
	tooDayOfWeek	INTEGER
	onTime	INTEGER
	offTime	INTEGER

PowerMonitoring
SEQUENCE
	pmUnitId	INTEGER
	pmCurrentPowerMonitoringAvailable	TrueFalse
	pmCurrentPowerMonitoringEnabled	TrueFalse
	pmNominalPowerConsumption	INTEGER
	pmCurrentPowerConsumption	Gauge
	pmCurrentPowerControl	INTEGER

UtilizationHistory
SEQUENCE
	uthUnitId	INTEGER
	uthEntity	INTEGER
	uthTimeStamp	INTEGER
	uthHardwareUUID	DisplayString
	uthAverageValue	Gauge
	uthMinValue	Gauge
	uthMaxValue	Gauge

PowerSourceInformation
SEQUENCE
	psiUnitId	INTEGER
	psiPowerSourceType	DisplayString
	psiPowerSourcePhase	INTEGER
	psiPowerSourceVoltage	INTEGER

TemperatureSensors
SEQUENCE
	tempUnitId	INTEGER
	tempSensorNr	INTEGER
	tempSensorDesignation	DisplayString
	tempSensorIdentifier	DisplayString
	tempSensorStatus	INTEGER
	tempCurrentTemperature	INTEGER
	tempWarningLevel	INTEGER
	tempCriticalLevel	INTEGER
	tempCriticalReaction	INTEGER

Fans
SEQUENCE
	fanUnitId	INTEGER
	fanNr	INTEGER
	fanDesignation	DisplayString
	fanIdentifier	DisplayString
	fanStatus	INTEGER
	fanCurrentSpeed	INTEGER
	fanQuality	INTEGER
	fanFailReaction	INTEGER
	fanFailShutdownDelay	INTEGER

Airflow
SEQUENCE
	afUnitId	INTEGER
	afExhaustAirflowVolume	INTEGER
	afExhaustAirflowVolumeUnit	DisplayString

SystemBoard
SEQUENCE
	sbUnitId	INTEGER
	systemBoardModelName	DisplayString
	systemBoardProductNumber	DisplayString
	systemBoardRevision	DisplayString
	systemBoardSerialNumber	DisplayString

PowerSupply
SEQUENCE
	psUnitId	INTEGER
	psPowerSupplyNr	INTEGER
	powerSupplyDesignation	DisplayString
	powerSupplyIdentifier	DisplayString
	powerSupplyStatus	INTEGER

Voltages
SEQUENCE
	voUnitId	INTEGER
	voSensorNr	INTEGER
	voltageDesignation	DisplayString
	voltageStatus	INTEGER
	voltageCurrentValue	INTEGER
	voltageNominalValue	INTEGER
	voltageMinimumLevel	INTEGER
	voltageMaximumLevel	INTEGER
	voltageCurrentLoad	Gauge

Cpus
SEQUENCE
	cpuUnitId	INTEGER
	cpuNr	INTEGER
	cpuDesignation	DisplayString
	cpuStatus	INTEGER
	cpuModelName	DisplayString
	cpuManufacturer	DisplayString
	cpuStep	DisplayString
	cpuCurrentSpeed	INTEGER
	cpuNumberLogicals	INTEGER
	cpuCacheL1Size	INTEGER
	cpuCacheL2Size	INTEGER
	cpuCacheL3Size	INTEGER
	cpuNumberCores	INTEGER
	cpuFamily	INTEGER
	cpuEnabledCores	INTEGER

MemoryModules
SEQUENCE
	memUnitId	INTEGER
	memModuleNr	INTEGER
	memModuleDesignation	DisplayString
	memModuleStatus	INTEGER
	memModuleBank	INTEGER
	memModuleCapacity	INTEGER
	memModuleStartAddress	INTEGER
	memModuleForm	DisplayString
	memModuleType	DisplayString
	memModuleCorrErrors	Counter
	memModuleUncorrErrors	Counter
	memModuleApproved	INTEGER
	memModuleConfiguration	INTEGER
	memModuleFrequency	INTEGER
	memModuleMaxFrequency	INTEGER
	memModuleVoltInterface	DisplayString

ComponentPowerConsumption
SEQUENCE
	cpcUnitId	INTEGER
	cpcComponentClass	INTEGER
	cpcComponentIndex	INTEGER
	cpcDesignation	DisplayString
	cpcCurrentValue	INTEGER

TrustedPlatformModule
SEQUENCE
	tpmUnitId	INTEGER
	tpmHardwareAvailable	TrueFalseUnknown
	tpmBiosEnabled	TrueFalseUnknown
	tpmEnabled	TrueFalseUnknown
	tpmActivated	TrueFalseUnknown
	tpmOwnership	TrueFalseUnknown

MessageLogs
SEQUENCE
	msgUnitId	INTEGER
	msgLogEntryNr	INTEGER
	msgLogEntryData	OCTET STRING

Watchdogs
SEQUENCE
	wdUnitId	INTEGER
	watchdogType	INTEGER
	watchdogStatus	INTEGER
	watchdogEnable	INTEGER
	watchdogTime	INTEGER
	watchdogAction	INTEGER

RecoverySettings
SEQUENCE
	asrUnitId	INTEGER
	asrNrRebootRetries	INTEGER
	asrDefaultRebootRetries	INTEGER
	asrNextBootSource	INTEGER
	asrRebootFailAction	INTEGER
	asrRestartDelay	INTEGER
	asrPostErrorHalt	INTEGER

MessageTextLogs
SEQUENCE
	msgTextLogUnitId	INTEGER
	msgTextLogLanguage	INTEGER
	msgTextLogSeqNr	INTEGER
	msgTextLogTimestamp	INTEGER
	msgTextLogMessage	DisplayString
	msgTextLogErrorCode	INTEGER
	msgTextLogSeverity	INTEGER
	msgTextLogCSSComponent	TrueFalse

MessageLogActionHints
SEQUENCE
	mlaLanguage	INTEGER
	mlaErrorCode	INTEGER
	mlaType	INTEGER
	mlaIndex	INTEGER
	mlaMessage	DisplayString

StatusComponents
SEQUENCE
	csUnitId	INTEGER
	csType	INTEGER
	componentStatusValue	INTEGER

ComponentStatusSensors
SEQUENCE
	cssUnitId	INTEGER
	cssSensorNumber	INTEGER
	cssSensorDesignation	DisplayString
	cssSensorDevice	DisplayString
	cssSensorDeviceInstance	INTEGER
	cssSensorPhysicalLed	TrueFalse
	cssSensorCssComponent	TrueFalse
	cssSensorStatus	INTEGER
	cssComponentServicePartId	DisplayString

MaintenanceObjects
SEQUENCE
	mtUnitId	INTEGER
	errorCounterStartTime	INTEGER
	sendTestTrap	INTEGER
	addTrapDestination	IpAddress
	mtMaintenanceStatus	INTEGER

FirmwareVersions
SEQUENCE
	fwUnitId	INTEGER
	fwType	INTEGER
	fwModelName	DisplayString
	fwVersion	DisplayString
	fwLocation	INTEGER

DeployInfo
SEQUENCE
	dplInfoUnitId	INTEGER
	deployInfoChassisId	DisplayString
	deployInfoMacAddr1	PhysAddress
	deployInfoMacAddr2	PhysAddress
	deployInfoMacAddr3	PhysAddress
	deployInfoMacAddr4	PhysAddress
	deployInfoIpAddr1	IpAddress
	deployInfoIpAddr2	IpAddress
	deployInfoIpAddr3	IpAddress
	deployInfoIpAddr4	IpAddress
	deployInfoNetMask1	IpAddress
	deployInfoNetMask2	IpAddress
	deployInfoNetMask3	IpAddress
	deployInfoNetMask4	IpAddress
	deployInfoGateway1	IpAddress
	deployInfoGateway2	IpAddress
	deployInfoGateway3	IpAddress
	deployInfoGateway4	IpAddress
	deployInfoHostname	DisplayString
	deployInfoMasterImageReference	DisplayString
	deployInfoStatusOfBlade	INTEGER
	deployInfoLanStatusOfSlot	INTEGER
	deployInfoAutomaticRecovery	INTEGER
	deployInfoStatusOfCloning	INTEGER
	deployInfoBootMode	INTEGER

OemDeployInfo
SEQUENCE
	odplInfoUnitId	INTEGER
	odplParamId	INTEGER
	oemDeployInfoParamData	DisplayString

DeployLanInterfaces
SEQUENCE
	dplLanUnitId	INTEGER
	dplLanInterfaceNr	INTEGER
	dplLanMacAddress	PhysAddress

Defined Values

fujitsu		1.3.6.1.4.1.211
OBJECT IDENTIFIER

products		1.3.6.1.4.1.211.1
OBJECT IDENTIFIER

iaServer		1.3.6.1.4.1.211.1.31
OBJECT IDENTIFIER

primequest		1.3.6.1.4.1.211.1.31.1
OBJECT IDENTIFIER

mmb		1.3.6.1.4.1.211.1.31.1.1
OBJECT IDENTIFIER

partition		1.3.6.1.4.1.211.1.31.1.2
OBJECT IDENTIFIER

sysInfo		1.3.6.1.4.1.211.1.31.1.1.1
OBJECT IDENTIFIER

agentInfo		1.3.6.1.4.1.211.1.31.1.1.1.1
OBJECT IDENTIFIER

unitInformation		1.3.6.1.4.1.211.1.31.1.1.1.2
OBJECT IDENTIFIER

management		1.3.6.1.4.1.211.1.31.1.1.1.3
OBJECT IDENTIFIER

serverInformation		1.3.6.1.4.1.211.1.31.1.1.1.4
OBJECT IDENTIFIER

environment		1.3.6.1.4.1.211.1.31.1.1.1.5
OBJECT IDENTIFIER

hardware		1.3.6.1.4.1.211.1.31.1.1.1.6
OBJECT IDENTIFIER

recovery		1.3.6.1.4.1.211.1.31.1.1.1.7
OBJECT IDENTIFIER

status		1.3.6.1.4.1.211.1.31.1.1.1.8
OBJECT IDENTIFIER

maintenance		1.3.6.1.4.1.211.1.31.1.1.1.9
OBJECT IDENTIFIER

deployment		1.3.6.1.4.1.211.1.31.1.1.1.10
OBJECT IDENTIFIER

agentId		1.3.6.1.4.1.211.1.31.1.1.1.1.1
Agent identification string; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

agentCompany		1.3.6.1.4.1.211.1.31.1.1.1.1.2
Agent's company name (e.g. Fujitsu Siemens Computers); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

agentVersion		1.3.6.1.4.1.211.1.31.1.1.1.1.3
Agent's version string (e.g. 1.05); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

agentBuild		1.3.6.1.4.1.211.1.31.1.1.1.1.4
Compilation time and date of agent program; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

agentWriteAllowed		1.3.6.1.4.1.211.1.31.1.1.1.1.5
Defines whether writable objects can be written (except shutdown/power-off operations); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), write-not-allowed(2), write-allowed(3)

agentShutdownAllowed		1.3.6.1.4.1.211.1.31.1.1.1.1.6
Defines whether shutdown/power-off objects can be written; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), shutdown-not-allowed(2), shutdown-allowed(3)

localServerUnitId		1.3.6.1.4.1.211.1.31.1.1.1.2.1
Unit identifier number of the local server (usually is ID 1). This ID can be used as index into the units table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

numberUnits		1.3.6.1.4.1.211.1.31.1.1.1.2.2
Number of available units (size of units table).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

unitTable		1.3.6.1.4.1.211.1.31.1.1.1.2.3
Description of all units in this MIB
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Units

units		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Units

uUnitId		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

unitClass		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.2
Unit classification (type)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	chassis(1), partition(2), free-pool(3), sb(4), iou(7), iou-divided(8), iou-nodivided(9), pci-box(10), fan-tray(17), op-panel(20), mmb(21), gspb(28), gspb-divided(29), gspb-nodivided(30), sas-unit(31), psu(32), dvdb(33), lpci-box(34), fan(35), du(36)

unitCainetNr		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.3
Physical identification number or partition identification number of units. The ID of the 'chassis' is usually 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

unitDesignation		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.4
Unit identification name. (e.g. 'SB#1') This object returns 'Part Number'; if the index shows chassis.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitModelName		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.5
Unit model name (e.g. 'PRIMERGY PRIMEQUEST 3200 model xxx')
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitManufacturer		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.6
Unit manufacturer name (e.g. 'Fujitsu')
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitSerialNumber		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.7
Unit serial number (e.g. '0202456123')
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitLocation		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.8
Unit location string (e.g. 'ServerCenter Room 17; Rack 9')
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitContact		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.9
Unit contact name (e.g. 'Mr. Bond')
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitAdminURL		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.10
URL of administration HTML interface(MMB-GUI) (e.g. 'http://MyServer/admin')
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

frontDoorStatus		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.11
Status describing whether the front door is open or closed; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), open(2), close(3)

housingOpenStatus		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.12
Status describing whether the housing is open or closed; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), open(2), close(3), opened-and-closed(4)

msgLogLanguages		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.13
Supported languages of text message log (comma-seperated list of decimal language codes; see sc2MessageTextLogTable). e.g. '1031;1033' means German and English are supported. English (1033) is the default language and is always available; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitWorldWideName		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.14
Unit World Wide Name. A 64-bit sized address for storage devices (e.g. '6661E2B0A00B88FB'); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

remcsId		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.15
REMCS system identification string (binary data); Not supported. Format of Fujitsu REMCS ID (40byte) Format = TTMMMMMMMMMMMMmmmmmmmmmmmmCCnnnnnnnnnnnn TT : 2byte : Type ID for Company Name MM...M : 12byte : Model Name mm...m : 12byte : Device Name CC : 2byte : Checksum nn...n : 12byte : Serial number
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

assetTag		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.16
Customer specific asset tag (40 bytes)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitManagementIpAddress		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.18
IPv4 address of the partition for management purpose (e.g. '192.168.0.140')
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitManagementIpAddressV6		1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.20
IPv6 address of the partition for management purpose (e.g. '2001:0db8:0000:85a3:0000:0000:ac1f:8001')
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitTableUpdateCount		1.3.6.1.4.1.211.1.31.1.1.1.2.4
Counter defining the update revision of the unit table. This counter is incremented with every table contents change/update.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

unitParentTable		1.3.6.1.4.1.211.1.31.1.1.1.2.5
Parent-child relationship of all units
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UnitParents

unitParents		1.3.6.1.4.1.211.1.31.1.1.1.2.5.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	UnitParents

pUnitId		1.3.6.1.4.1.211.1.31.1.1.1.2.5.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

pParentNr		1.3.6.1.4.1.211.1.31.1.1.1.2.5.1.2
Parent number (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

parentUnit		1.3.6.1.4.1.211.1.31.1.1.1.2.5.1.3
Parent unit. This is the same value as in the object of 'pParentNr'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

parentUnitClass		1.3.6.1.4.1.211.1.31.1.1.1.2.5.1.4
Unit classification (type). This is the same value as in units table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	chassis(1), partition(2), free-pool(3), sb(4), iou(7), iou-divided(8), iou-nodivided(9), pci-box(10), fan-tray(17), op-panel(20), mmb(21), gspb(28), gspb-divided(29), gspb-nodivided(30), sas-unit(31), psu(32), dvdb(33), lpci-box(34), fan(35), du(36)

unitChildTable		1.3.6.1.4.1.211.1.31.1.1.1.2.6
Parent-child relationship of all units
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UnitChilds

unitChilds		1.3.6.1.4.1.211.1.31.1.1.1.2.6.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	UnitChilds

cUnitId		1.3.6.1.4.1.211.1.31.1.1.1.2.6.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cChildNr		1.3.6.1.4.1.211.1.31.1.1.1.2.6.1.2
Child number (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

childUnit		1.3.6.1.4.1.211.1.31.1.1.1.2.6.1.3
Child unit. This is the same value as in the object of 'cChildNr'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

childUnitClass		1.3.6.1.4.1.211.1.31.1.1.1.2.6.1.4
Unit classification (type). This is the same value as in units table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	chassis(1), partition(2), free-pool(3), sb(4), iou(7), iou-divided(8), iou-nodivided(9), pci-box(10), fan-tray(17), op-panel(20), mmb(21), gspb(28), gspb-divided(29), gspb-nodivided(30), sas-unit(31), psu(32), dvdb(33), lpci-box(34), fan(35), du(36)

parentChildTableUpdateCount		1.3.6.1.4.1.211.1.31.1.1.1.2.7
Counter defining the update revision of the parent-child unit table. This counter is incremented with every table contents change/update.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

managementNodeTable		1.3.6.1.4.1.211.1.31.1.1.1.3.1
SNMP management node addresses (how to address the units)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ManagementNodes

managementNodes		1.3.6.1.4.1.211.1.31.1.1.1.3.1.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ManagementNodes

mnUnitId		1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mnNodeNr		1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.2
Management node address number (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

unitNodeIfType		1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.3
Management node interface type
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), ip(2), ipx(3), ipv6-ip(4), virtual-ip(5), ipv6-virtual-ip(6)

unitNodeAddress		1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.4
Management node address (e.g. 192.168.0.100)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitNodeIpNetmask		1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.5
Management node address (e.g. 255.255.255.128)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitNodeGateway		1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.6
Management node address (e.g. 192.168.0.126)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitNodeName		1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.7
Management node name (e.g. 'primequest-no1')
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitNodeClass		1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.8
Management node class: primary: operating system interface secondary: remote management controller interface management-blade: management blade in blade server secondary-backup: backup remote management controller interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), primery(2), secondary(3), manegement-blade(4), secondary-remote(5), secondary-remote-backup(6), baseboard-controller(7), secondary-manegement-blade(8)

unitNodeMacAddress		1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.9
Management node hardware (MAC) address; ff:ff:ff:ff:ff:ff if value not available
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

unitNodeUseDHCP		1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.10
Management node uses DHCP to obtain its address
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), use-fixed-address(2), use-dhcp(3)

unitNodeControllerType		1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.11
The type of the remote management controller (for identification); like 'RSB'; 'RSB S2'; 'RSB S2 LP'... These names will not be changed if defined once; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitNodeControllerModel		1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.12
The model name of the remote management controller (for displaying); like 'Remote Service Board'; RemoteView Service Board S2'c This name should not be used for identification;only for displaying (can be changed in different firmware versions)! Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitNodeControllerFWVersion		1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.13
The FW version of the remote management controller; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

nodeTableUpdateCount		1.3.6.1.4.1.211.1.31.1.1.1.3.2
Counter defining the update revision of the management node table. This counter is incremented with every table contents change/update.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

managementChannelType		1.3.6.1.4.1.211.1.31.1.1.1.3.3
The type of the management channel currently used (this MIB instance).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), primery(2), secondary(3)

managementProcessorTable		1.3.6.1.4.1.211.1.31.1.1.1.3.4
System management service processors
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ManagementProcessors

managementProcessors		1.3.6.1.4.1.211.1.31.1.1.1.3.4.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ManagementProcessors

spUnitId		1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

spProcessorNr		1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.2
Service processor number (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

spModelName		1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.3
Service processor model name
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

spFirmwareVersion		1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.4
Service processor firmware version / revision
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

spBatteryStatus		1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.5
Service processor backup battery status
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), not-present(2), ok(3), on-battery(4), recharging(5), failed(6), discharging(7)

spBatteryDischargeTime		1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.6
Maximum time (in seconds) this backup battery can discharged. after that a shutdown will be performed (-1 = unknown); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

spTimeOnBattery		1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.7
Time (in seconds) the service processor is running on battery since power fail (will be cleared on power recovery); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

spDoBatteryChargeCycle		1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.8
Perform a discharge/charge cycle on the backup battery by writing a non-zero value. Reading this object just returns the value 0; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

spBatteryChargeLevel		1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.9
Reads the current charge level of the rechargeable battery (in percent of the maximum capacity); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

managedUpsNodeTable		1.3.6.1.4.1.211.1.31.1.1.1.3.5
UPS nodes managed by the units; Not supported.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ManagementUpsNodes

managedUpsNodes		1.3.6.1.4.1.211.1.31.1.1.1.3.5.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ManagementUpsNodes

upsUnitId		1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.1
Unit identifier (index: 1..n); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

upsNr		1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.2
UPS number (index: 1..n); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

upsVendorName		1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.3
UPS vendor name; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

upsModelName		1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.4
UPS model name; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

upsIpAddress		1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.5
UPS IP address (represented as string; may also contain an IP V6 address); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

upsMibRoot		1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.6
UPS MIB root OID; specifies the root OID of the MIB to be used to query UPS via SNMP (empty string if no SNMP agent available); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

upsSnmpCommunity		1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.7
UPS SNMP community name (empty string if no SNMP agent available); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

upsHttpPort		1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.8
UPS HTTP interface port; specifies the TCP port number for accessing the UPS management interface via HTTP (0 if no HTTP server available); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

managementTimeZone		1.3.6.1.4.1.211.1.31.1.1.1.3.6
Management node timezone (e.g. '2004-9-22 12:15:18+09:00')
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

serverTable		1.3.6.1.4.1.211.1.31.1.1.1.4.1
Table containing information about the available servers
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Servers

servers		1.3.6.1.4.1.211.1.31.1.1.1.4.1.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Servers

srvUnitId		1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

srvPhysicalMemory		1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.2
Size of physical main memory installed (MBytes); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

srvLastBootResult		1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.3
Result of last system boot; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), os-boot-successful(2), diagnostic-boot-successful(3), no-boot-cpu(4), no-bootable-media(5), os-failed-load(6), diagnostic-boot-failed(7), hardware-failure(8)

srvCurrentBootStatus		1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.4
Status of the current boot unknown(1)' returns; during the Power-on->POST and the shutdown->Power-off.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), off(2), no-boot-cpu(3), self-test(4), setup(5), os-boot(6), diagnostic-boot(7), os-running(8), diagnostic-running(9), os-shutdown(10), diagnostic-shutdown(11), reset(12), panic(13), check-stop(14), dumping(15), halt(16), xpar-firm-running(17)

srvShutdownCommand		1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.5
Shutdown the server and switch off or reset; a delay (see object below) can be defined before the command is being executed; on reading that value you get the currently pending or executing command value; argument tells what kind of action: power-on: switch power on power-off: switch power off power-cycle: switch power off and switch power on again. shutdown-and-off: execute a shutdown then power off shutdown-and-reset: execute a shutdown then reset shutdown-and-power-cycle: execute a shutdown then power off and on again raise-nmi: raise an NMI (normally causes debugger to start) The value unknown(1) cannot be set; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), power-off(2), power-on(3), power-cycle(4), shutdown-and-off(5), shutdown-and-reset(6), shutdown-and-power-cycle(7), raise-nmi(8), abort-pending-command(9), reset(10)

srvShutdownDelay		1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.6
Delay time (seconds) the agent waits before executing the shutdown command (see previous command). 0 = immediate action; no delay -1 = unknown (delay not supported) The value unknown(-1) cannot be set; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

srvUUID		1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.7
Universal Unique ID (UUID) number - this is a world wide unique ID number of the server. Can be used for identifying a server. The format is like this: 157E465A-A4AC-D711-A847-DD85CECD12EC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

srvPhysicalMemoryOs		1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.8
Size of physical main memory available to the operating system (MBytes). This value is similar to sc2srvPhysicalMemory'; but may be less if the system has mirror or hot spare memory modules; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

srvTpmMode		1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.9
Trusted Platform Module(TPM) setting.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

srvManagementIP		1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.10
BMC management address (e.g. 192.168.0.150)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

unitPowerOnOffTable		1.3.6.1.4.1.211.1.31.1.1.1.4.2
Unit power-on and -off information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UnitPowerOnOff

unitPowerOnOff		1.3.6.1.4.1.211.1.31.1.1.1.4.2.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	UnitPowerOnOff

ooUnitId		1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

powerOnOffStatus		1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.2
Current power on/off status
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), off(2), on(3)

lastPowerOffSource		1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.3
Reason why the system was switched off last time; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), swoff-command(2), power-button(3), ac-fail(4), clock(5), fan-fail(6), temperature-critical(7), temperature-damage(8), power-supply-failure(9), watchdog(10), remote-off(11), hardware-fail(12), peripheral-bus-error(13), cpu-error(14), nmi(20), hardware-reset(23), warmstart(24), reset-button(25), ac-fail-reboot(26), keyboard(29), remote-manager(31), remote-manager-reset(32), power-limiting(35), mmb-continuous-operation(36), watchdog-power-cycle(37), firmware-restart(242), housing-opened(243)

lastPowerOnSource		1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.4
Source the system was switched on from; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), swoff-command(2), power-button(3), ac-fail(4), clock(5), fan-fail(6), temperature-critical(7), temperature-damage(8), power-supply-failure(9), watchdog(10), remote-on(11), hardware-fail(12), peripheral-bus-error(13), cpu-error(14), nmi(20), hardware-reset(23), warmstart(24), reset-button(25), ac-fail-reboot(26), mgmt-processor-fail(27), pci-pme(28), keyboard(29), chipcard-reader(30), remote-manager(31), remote-manager-reset(32), power-cycle(33), firmware-restart(242), housing-opened(243)

lastPowerOnTime		1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.5
Time and Date the system was booted (seconds since 1/1/1970; -1 = unknown); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

powerOnCounts		1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.6
Tells how often the server was switched on in its life (-1 = unknown); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

powerOnDuration		1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.7
Tells how long the system has stayed ON in its life (in hours; -1 = unknown); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

powerOffDuration		1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.8
Tells how long the system has stayed OFF in its life (in hours; -1 = unknown); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

powerFailRecovery		1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.9
Action on AC power recovery after AC has failed. not-available(2) : function not available; behavior is hardware-defined. as-before(3) : server gets the same power state as before the AC fail. remain-off(4) : server remains off on power resume. switch-on(5) : server is always switched on on power resume. schedule-sync(6) : server synchronizes the power state with the schedule setting.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), not-available(2), as-before(3), remain-off(4), switch-on(5), schedule-sync(6)

powerCommand		1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.10
Switch the unit on or off; argument tells what kind of action: on: switch power on off: switch power off power-cycle: switch power off and switch power on again. The value unknown(1) cannot be set; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), off(2), on(3), power-cycle(4)

powerSupplyRedundancy		1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.11
Specifies whether the power supply system contains redundant power supplies: 0 : no redundant power supplies available 1 : redundant power supplies available
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

performanceTable		1.3.6.1.4.1.211.1.31.1.1.1.4.3
Server performance and utilization information; Not supported.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Performance

performance		1.3.6.1.4.1.211.1.31.1.1.1.4.3.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Performance

perfUnitId		1.3.6.1.4.1.211.1.31.1.1.1.4.3.1.1
Unit identifier (index; 1..n); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

perfNr		1.3.6.1.4.1.211.1.31.1.1.1.4.3.1.2
Server performance entry number (index; 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

perfType		1.3.6.1.4.1.211.1.31.1.1.1.4.3.1.3
Server performance object type (description see below); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cpu(1), cpu-pverall(2), pci-load(3), pci-efficiency(4), pci-transfer(5), memory-physical(6), memory-total(7), memory-percent(8)

performanceValue		1.3.6.1.4.1.211.1.31.1.1.1.4.3.1.4
Server performance value (value interpretation depending on type):; Not supported. cpu: Load of a single CPU in percent cpu-overall: Overall CPU load in percent pci-load: PCI bus load in percent pci-efficiency: PCI bus efficiency in percent (100% is optimum) pci-transfer: PCI bus transfer rate in MBytes/sec. memory-physical: Physical memory usage in MBytes memory-total: Total memory usage (physical + virtual) in MBytes memory-percent: Physical memory usage in percent
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

performanceName		1.3.6.1.4.1.211.1.31.1.1.1.4.3.1.5
Name (short description) of the performance value (e.g. 'CPU1'). Can be used for displaying a list of performance values in the management frontend; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

timerOnOffTable		1.3.6.1.4.1.211.1.31.1.1.1.4.4
Power on/off timer table; Not supported.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TimerOnOff

timerOnOff		1.3.6.1.4.1.211.1.31.1.1.1.4.4.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TimerOnOff

tooUnitId		1.3.6.1.4.1.211.1.31.1.1.1.4.4.1.1
Unit identifier (index: 1..n); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

tooDayOfWeek		1.3.6.1.4.1.211.1.31.1.1.1.4.4.1.2
Day of the week the times should act upon (index); 1=Sunday 2=Monday... ; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

onTime		1.3.6.1.4.1.211.1.31.1.1.1.4.4.1.3
Time the system should be switched on (by the real-time clock; in minutes since midnight; -1 = disabled; no on time). Only values -1 and 0..1439 are allowed; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

offTime		1.3.6.1.4.1.211.1.31.1.1.1.4.4.1.4
Time the system should be switched off (by the real-time clock of software; in minutes since midnight; -1 = disabled; no on time). Only values -1 and 0..1439 are allowed; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

powerMonitoringTable		1.3.6.1.4.1.211.1.31.1.1.1.4.5
Power monitoring table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PowerMonitoring

powerMonitoring		1.3.6.1.4.1.211.1.31.1.1.1.4.5.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PowerMonitoring

pmUnitId		1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

pmCurrentPowerMonitoringAvailable		1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.2
Power monitoring and control available on this server: true: Power monitoring and power control is available false: Power monitoring and power control is not available
Status: mandatory	Access: read-only
OBJECT-TYPE
	TrueFalse

pmCurrentPowerMonitoringEnabled		1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.3
Power monitoring enable value: true: Power monitoring and data gathering is enabled false: Power monitoring and data gathering is disabled or not available
Status: mandatory	Access: read-only
OBJECT-TYPE
	TrueFalse

pmNominalPowerConsumption		1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.4
Nominal (maximum) value of the system's power consumption (in Watts; -1 if value not available)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

pmCurrentPowerConsumption		1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.5
Current value of the system's power consumption (in Watts; 4294967295(0xffffffff) if value not available)
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

pmCurrentPowerControl		1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.6
Power mode control value; Not supported. disabled: The baseboard management controller does not control the power saving behaviour best-performance: The baseboard management controller gives best performance to the system (power consumption may be increased) minimum-power: The baseboard management controller controls the system in way to consume minimum power (performance may be reduced) automatic: The baseboard management controller automatically controls power consumption between good performance and low power consumption scheduled: The baseboard management controller controls power consumption by schedule
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), disabled(2), best-performance(3), minimum-power(4), automatic(5), scheduled(6), limited(7)

pmPowerLimitThreshold		1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.8
Maximum limit value of the system's power consumption (in Watts; -1 if value not available; only valid if limiting enabled)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

pmPowerControlMode		1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.11
Configured power control mode value: disabled: The management controller does not control the power saving behaviour best-performance: The management controller gives best performance to the system (power consumption may be increased) minimum-power: The management controller controls the system in way to consume minimum power (performance may be reduced) automatic: The management controller automatically controls power consumption between good performance and low power consumption scheduled: The management controller controls power consumption by schedule limited: The management controller controls power consumption by power limit low-noise: The management controller controls the power to ensure running
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), disabled(2), best-performance(3), minimum-power(4), automatic(5), scheduled(6), limited(7), low-noise(8)

pmPowerDisplayUnit		1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.12
Configurd unit for the display of power consumption values: Watt: Power consumption values are displayed in Watts Btu/h: Power consumption values are displyed in Btu
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), watt(2), btu(3)

utilizationHistoryTable		1.3.6.1.4.1.211.1.31.1.1.1.4.6
Utilization history table (for power consumption); table only contains existing values (no values for non-existing values); Not supported.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UtilizationHistory

utilizationHistory		1.3.6.1.4.1.211.1.31.1.1.1.4.6.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	UtilizationHistory

uthUnitId		1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.1
Unit identifier (index; 1..n); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

uthEntity		1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.2
Utilization value entity; describes what kind of value to be requested; Not supported. powerConsumptionDay: power consumption values of the last 24 hours; one value (Watts) per minute powerConsumptionMonth: power consumption values of the last month; one value (Watts) per hour powerConsumptionYear: power consumption values of the last year; one value (Watts) per day
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	powerConsumptionDay(1), powerConsumptionMonth(2), powerConsumptionYear(3)

uthTimeStamp		1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.3
Time stamp of the currenty history entry (time_t = seconds since 1/1/1970; 0:00 AM); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

uthHardwareUUID		1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.4
UUID of the hardware instance that delivered the value (from object sc2srvUUID); may change if an installation is migrated to another hardware (e.g. in blade environments); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

uthAverageValue		1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.5
Average value (in Watts) within the monitored time period (minute; hour; day); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

uthMinValue		1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.6
Minimum (lowest) value within the monitored time period; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

uthMaxValue		1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.7
Maximum (highest) value within the monitored time period; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

powerSourceInformationTable		1.3.6.1.4.1.211.1.31.1.1.1.4.7
Power source information table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PowerSourceInformation

powerSourceInformation		1.3.6.1.4.1.211.1.31.1.1.1.4.7.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PowerSourceInformation

psiUnitId		1.3.6.1.4.1.211.1.31.1.1.1.4.7.1.1
Unit identifier (index; 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

psiPowerSourceType		1.3.6.1.4.1.211.1.31.1.1.1.4.7.1.2
System input power source type (e.g. 'AC'; 'DC')
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

psiPowerSourcePhase		1.3.6.1.4.1.211.1.31.1.1.1.4.7.1.3
System input phase of power source.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), single-phase(2), three-phase(3)

psiPowerSourceVoltage		1.3.6.1.4.1.211.1.31.1.1.1.4.7.1.4
System nominal input voltage of power source (in Volts; -1 if value not available).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

temperatureSensorTable		1.3.6.1.4.1.211.1.31.1.1.1.5.1
Temperature sensors
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TemperatureSensors

temperatureSensors		1.3.6.1.4.1.211.1.31.1.1.1.5.1.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TemperatureSensors

tempUnitId		1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

tempSensorNr		1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.2
Temperature sensor number (index: 0..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

tempSensorDesignation		1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.3
Temperature sensor designation (e.g. SB#0-CPU#A0 Temp.)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

tempSensorIdentifier		1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.4
Temperature sensor identification string (e.g. TEMP-RSB1); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

tempSensorStatus		1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.5
Status of the temperature sensor Status mapping. SEL level MIB Value Warning temperature-warning(6) Error temperature-critical(7) Error failed(5)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), not-available(2), ok(3), failed(5), temperature-warning(6), temperature-critical(7)

tempCurrentTemperature		1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.6
Current temperature at this sensor (degrees Celsius). This object returns 0; if the agent can not get the value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

tempWarningLevel		1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.7
Maximum temperature - warning level (degrees Celsius)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

tempCriticalLevel		1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.8
Maximum temperature - critical level (degrees Celsius). system shutdown may occur if this level is exceeded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

tempCriticalReaction		1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.9
Reaction if temperature exceeds the critical level.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), continue(2), shutdown-and-poweroff(3)

fanTable		1.3.6.1.4.1.211.1.31.1.1.1.5.2
Fans
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Fans

fans		1.3.6.1.4.1.211.1.31.1.1.1.5.2.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Fans

fanUnitId		1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

fanNr		1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.2
Fan number (index: 0..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

fanDesignation		1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.3
Fan designation (e.g. FAN-TRAY#00-Fan#00-1)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

fanIdentifier		1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.4
Fan identification string (e.g. FAN-1-POWERSUPPLY); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

fanStatus		1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.5
Status of the fan Status mapping. SEL level MIB Value Error failed(5)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), disabled(2), ok(3), failed(4), prefailed-predicted(5), redundant-fan-failed(6), not-manageable(7), not-present(8)

fanCurrentSpeed		1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.6
Current fan speed (revolutions per minute). This object returns 0; if the agent can not get the value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

fanQuality		1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.7
Quality of fan (in percent of nominal speed - measured at full speed); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

fanFailReaction		1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.8
Reaction if the fan fails.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), continue(2), shutdown-and-poweroff(3)

fanFailShutdownDelay		1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.9
Delay time (in seconds) when shutdown should commit on fan fail (if shutdown-and-off is configured; 0 = immediately -1 = unknown; cannot be set); Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

airflowTable		1.3.6.1.4.1.211.1.31.1.1.1.5.3
Exhaust airflow volume table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Airflow

airflow		1.3.6.1.4.1.211.1.31.1.1.1.5.3.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Airflow

afUnitId		1.3.6.1.4.1.211.1.31.1.1.1.5.3.1.1
Unit identifier (index; 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

afExhaustAirflowVolume		1.3.6.1.4.1.211.1.31.1.1.1.5.3.1.2
System exhaust airflow volume ('-1' if value not available)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

afExhaustAirflowVolumeUnit		1.3.6.1.4.1.211.1.31.1.1.1.5.3.1.3
System exhaust airflow volume unit (e.g. 'cbm/h'; 'ccm/min'; ...)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

systemBoardTable		1.3.6.1.4.1.211.1.31.1.1.1.6.1
System board (main board) information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SystemBoard

systemBoard		1.3.6.1.4.1.211.1.31.1.1.1.6.1.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SystemBoard

sbUnitId		1.3.6.1.4.1.211.1.31.1.1.1.6.1.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

systemBoardModelName		1.3.6.1.4.1.211.1.31.1.1.1.6.1.1.2
Model name (e.g. 'System Board')
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

systemBoardProductNumber		1.3.6.1.4.1.211.1.31.1.1.1.6.1.1.3
Product number (may be identical to ModelName)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

systemBoardRevision		1.3.6.1.4.1.211.1.31.1.1.1.6.1.1.4
Revision string (e.g. 'WGS1 GS3')
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

systemBoardSerialNumber		1.3.6.1.4.1.211.1.31.1.1.1.6.1.1.5
Serial number (not available for all boards)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

powerSupplyTable		1.3.6.1.4.1.211.1.31.1.1.1.6.2
Power supplies
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PowerSupply

powerSupply		1.3.6.1.4.1.211.1.31.1.1.1.6.2.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PowerSupply

psUnitId		1.3.6.1.4.1.211.1.31.1.1.1.6.2.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

psPowerSupplyNr		1.3.6.1.4.1.211.1.31.1.1.1.6.2.1.2
Power supply (bay) number (index: 0..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

powerSupplyDesignation		1.3.6.1.4.1.211.1.31.1.1.1.6.2.1.3
Power supply designation (e.g. PWRSYS#1-FEP#0)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

powerSupplyIdentifier		1.3.6.1.4.1.211.1.31.1.1.1.6.2.1.4
Power supply identification string (e.g. PS1); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

powerSupplyStatus		1.3.6.1.4.1.211.1.31.1.1.1.6.2.1.5
Power supply status Status mapping. SEL level MIB Value Warning ac-fail(5) Warning predictive-fail(9) Error failed(4) Error not-manageable(8)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), not-present(2), ok(3), failed(4), ac-fail(5), dc-fail(6), critical-temperature(7), not-manageable(8), predictive-fail(9)

psPowerSupplyLoad		1.3.6.1.4.1.211.1.31.1.1.1.2.1.6
Actual power supply output load in Watts (0 = not available); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

voltageTable		1.3.6.1.4.1.211.1.31.1.1.1.6.3
Voltages - all voltage values are in 1/100th Volts; a value of 330 means 3.30 Volts (0xffffffff = unknown)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Voltages

voltages		1.3.6.1.4.1.211.1.31.1.1.1.6.3.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Voltages

voUnitId		1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

voSensorNr		1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.2
Voltage sensor number (index: 0..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

voltageDesignation		1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.3
Voltage designation string (e.g. SB#1-+5V#1)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

voltageStatus		1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.4
Voltage status Status mapping. SEL level MIB Value Warning low-warning(7) Warning high-warning(8) Error too-low(4) Error too-high(5)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), not-available(2), ok(3), too-low(4), too-high(5), sensor-failed(6), low-warning(7), high-warning(8)

voltageCurrentValue		1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.5
Voltage current value. This object returns 0; if the agent can not get the value.(1/100V)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

voltageNominalValue		1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.6
Voltage nominal value; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

voltageMinimumLevel		1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.7
Voltage minimum level (1/100V)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

voltageMaximumLevel		1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.8
Voltage maximum level (1/100V)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

voltageCurrentLoad		1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.9
Current output load on this voltage line. in percent of the maximum load (0xffffffff = unknown); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

cpuTable		1.3.6.1.4.1.211.1.31.1.1.1.6.4
CPU description table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cpus

cpus		1.3.6.1.4.1.211.1.31.1.1.1.6.4.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cpus

cpuUnitId		1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpuNr		1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.2
CPU (socket) number (index: 0..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpuDesignation		1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.3
CPU designation (e.g. SB#0-CPU#A0)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cpuStatus		1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.4
CPU status Status mapping. SEL level MIB Value Warning disabled(4) Warning prefailed-warning(8) Error failed(6)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), not-present(2), ok(3), disabled(4), error(5), failed(6), missing-termination(7), prefailed-warning(8)

cpuModelName		1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.5
CPU model name (e.g. Itanium2 Processor)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cpuManufacturer		1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.6
CPU manufacturer name (e.g. Intel); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cpuStep		1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.7
CPU step / revision
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cpuCurrentSpeed		1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.8
CPU speed (frequency in MHz)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpuNumberLogicals		1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.9
Number of (physically available) logical CPUs within one physical CPU (for hyper-threading and multi-core CPUs). This is the sum of all cores and all logical CPUs of a hyper-threading CPU; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpuCacheL1Size		1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.10
Size of first level cache (in kBytes; -1 if unknown); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpuCacheL2Size		1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.11
Size of second level cache (in kBytes; -1 if unknown); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpuCacheL3Size		1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.12
Size of third level cache (in kBytes; -1 if unknown)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpuNumberCores		1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.13
Number of (physically available) cores within one physical CPU (for multi-core CPUs; platform dependent)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpuFamily		1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.14
CPU family code. This enumerated value is specified by the DMTF SMBIOS specification (processor information; type 4); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpuEnabledCores		1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.15
Number of effectively enabled cores within one physical CPU (for multi-core CPUs; 0 if unknown)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

memoryModuleTable		1.3.6.1.4.1.211.1.31.1.1.1.6.5
Main memory module table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MemoryModules

memoryModules		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MemoryModules

memUnitId		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

memModuleNr		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.2
Memory module (socket) number (index: 0..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

memModuleDesignation		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.3
Memory module designation (e.g. SB#0-DIMM#0A0)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

memModuleStatus		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.4
Memory module status Status mapping. SEL level MIB Value Warning failed-disabled(4) Warning warning(7) Error error(5) Error configuration-error(9)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), not-present(2), ok(3), failed-disabled(4), error(5), warning(7), hot-spare(8), configuration-error(9)

memModuleBank		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.5
Memory module bank number (-1 if unknown); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

memModuleCapacity		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.6
Memory module size (capacity in MBytes; -1 if unknown)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

memModuleStartAddress		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.7
Memory module start address (in MBytes; -1 if unknown); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

memModuleForm		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.8
Memory module form (SIMM DIMM ...); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

memModuleType		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.9
Memory module type (SDRAM DDRAM DDR2 DDR3 ...); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

memModuleCorrErrors		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.10
Number of memory module correctable errors (-1 if unknown); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

memModuleUncorrErrors		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.11
Number of memory module uncorrectable errors (-1 if unknown); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

memModuleApproved		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.12
Memory module approved for this machine; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), no(2), yes(3)

memModuleConfiguration		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.13
Memory module configuration; Not supported. unknown(1): Module configuration could not be evaluated normal(2): Module is in normal non-redundant configuration or slot is empty disabled(3): Module is disabled (manually through BIOS setup) hotSpare(4): Module is a hot-spare (standby) module; which will be used as a run-time-replacement for failed modules mirror(5): Module is part of a mirror configuration raid(6): Module is part of a RAID configuration notUsable(7): Module is not usable in the actual configuration because of architectural restrictions This object replaces the previous redundancy status values hot-spare and mirror in sc2memModuleStatus.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), normal(2), disabled(3), hotSpare(4), mirror(5), raid(6), notUsable(7)

memModuleFrequency		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.14
Memory module actual front side bus frequency (in MHz; -1 if unknown). This value is based on the BIOS settings; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

memModuleMaxFrequency		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.15
Memory module maximum front side bus frequency (in MHz; -1 if unknown). This value is based on memory module SPD data; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

memModuleVoltInterface		1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.16
Memory module interface voltage interface description; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cpuMultithreadEnable		1.3.6.1.4.1.211.1.31.1.1.1.6.6
Multithreading of CPU enabled; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), disabled(2), enabled(3)

componentPowerConsumptionTable		1.3.6.1.4.1.211.1.31.1.1.1.6.7
Table of component power consumption data; Not supported.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ComponentPowerConsumption

componentPowerConsumption		1.3.6.1.4.1.211.1.31.1.1.1.6.7.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ComponentPowerConsumption

cpcUnitId		1.3.6.1.4.1.211.1.31.1.1.1.6.7.1.1
Unit identifier (index; 1..n); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpcComponentClass		1.3.6.1.4.1.211.1.31.1.1.1.6.7.1.2
Component class enumeration (based on IPMI v1.0 entity ID); Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	processor(3), disk(4), memory-unit(8), processor-module(9), chassis(23), sub-chassis(24), disk-bay(26), cooling-device(29), cooling-unit(30), memory-device(32)

cpcComponentIndex		1.3.6.1.4.1.211.1.31.1.1.1.6.7.1.3
Component index within class (1..n); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpcDesignation		1.3.6.1.4.1.211.1.31.1.1.1.6.7.1.4
Component designation; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cpcCurrentValue		1.3.6.1.4.1.211.1.31.1.1.1.6.7.1.5
Current component power consumption in Watts; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

trustedPlatformModuleTable		1.3.6.1.4.1.211.1.31.1.1.1.6.8
Trusted Platform Module (TPM) status information (see corresponding TPM specification for detailed description of these states)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TrustedPlatformModule

trustedPlatformModule		1.3.6.1.4.1.211.1.31.1.1.1.6.8.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TrustedPlatformModule

tpmUnitId		1.3.6.1.4.1.211.1.31.1.1.1.6.8.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

tpmHardwareAvailable		1.3.6.1.4.1.211.1.31.1.1.1.6.8.2
TPM hardware is available ('unknown' if hardware availability cannot be detected; no interface found)
Status: mandatory	Access: read-only
OBJECT-TYPE
	TrueFalseUnknown

tpmBiosEnabled		1.3.6.1.4.1.211.1.31.1.1.1.6.8.3
TPM hardware is enabled by BIOS ('unknown' if hardware is not available; a reboot is required to change this value)
Status: mandatory	Access: read-only
OBJECT-TYPE
	TrueFalseUnknown

tpmEnabled		1.3.6.1.4.1.211.1.31.1.1.1.6.8.4
TPM is enabled (by software; cannot take ownership if disabled; 'unknown' if hardware is not available or disabled)
Status: mandatory	Access: read-only
OBJECT-TYPE
	TrueFalseUnknown

tpmActivated		1.3.6.1.4.1.211.1.31.1.1.1.6.8.5
TPM is activated (by software; 'unknown' if hardware is not available or disabled)
Status: mandatory	Access: read-only
OBJECT-TYPE
	TrueFalseUnknown

tpmOwnership		1.3.6.1.4.1.211.1.31.1.1.1.6.8.6
TPM ownership is established (valid endorsement key is existing; 'unknown' if hardware is not available or disabled)
Status: mandatory	Access: read-only
OBJECT-TYPE
	TrueFalseUnknown

messageLogTable		1.3.6.1.4.1.211.1.31.1.1.1.7.1
Error and event message handling; Not supported.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MessageLogs

messageLogs		1.3.6.1.4.1.211.1.31.1.1.1.7.1.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MessageLogs

msgUnitId		1.3.6.1.4.1.211.1.31.1.1.1.7.1.1.1
Unit identifier (index: 1..n); Not supported..
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

msgLogEntryNr		1.3.6.1.4.1.211.1.31.1.1.1.7.1.1.2
Message log entry number (index: 0..n); Not supported..
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

msgLogEntryData		1.3.6.1.4.1.211.1.31.1.1.1.7.1.1.3
Message log entry data (binary; one message per table entry); Not supported..
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

watchdogTable		1.3.6.1.4.1.211.1.31.1.1.1.7.2
Watchdogs
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Watchdogs

watchdogs		1.3.6.1.4.1.211.1.31.1.1.1.7.2.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Watchdogs

wdUnitId		1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

watchdogType		1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.2
Watchdog type
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), hardware(2), software(3), bios(4), boot(5), management-controller(6), remote-management-controller(7), management-soft(8)

watchdogStatus		1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.3
Watchdog status
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), disable(2), enable(3), not-available(4)

watchdogEnable		1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.4
Enable/disable watchdog
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), disable(2), enable(3)

watchdogTime		1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.5
Watchdog timeout period in seconds
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

watchdogAction		1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.6
Watchdog timeout action
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), continue(2), reboot(3), nmi(4), power-cycle(5), power-down(6), hardware-reset(7)

recoverySettingTable		1.3.6.1.4.1.211.1.31.1.1.1.7.3
ASR&R (Automatic server recovery and restart) settings; Not supported.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RecoverySettings

recoverySettings		1.3.6.1.4.1.211.1.31.1.1.1.7.3.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RecoverySettings

asrUnitId		1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.1
Unit identifier (index: 1..n); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

asrNrRebootRetries		1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.2
Current number of retries to reboot/restart the server when a failure shutdown (and power-off) had occurred. After this number of retries the action defined in 'sc2asrRebootFailAction' will be executed (-1 = unknown; no retries). The value unknown(1) cannot be set; a SET will deliver 'badValue'; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

asrDefaultRebootRetries		1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.3
Default number of retries for server failure reboot. The previous object sc2asrNrRebootRetries will be set to this value after the server is working properly for a certain amount of time; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

asrNextBootSource		1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.4
Source medium to boot from (next time): operating-system: boot from floppy or hard disk diag-system: boot from alternate diagnostic system (only for SCSI systems; load diagnostic system from alternate IDE disk). remote-disk: boot from remote network disk The value unknown(1) cannot be set; a SET will deliver 'badValue'; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), operating-system(2), reserved(3), diag-system(4), remote-disk(5)

asrRebootFailAction		1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.5
Specifies the action after a specified number of failed reboot retries (the object 'sc2asrNrRebootRetries' has reached zero).The value no-diag-system(4) means that a diagnostic system is not available; no other value can be set. The values unknown(1) and reserved(3) cannot be set; a SET will deliver 'badValue'; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), switch-off(2), boot-diag-system(3), no-diag-system(4)

asrRestartDelay		1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.6
Delay (in minutes) when the system should be automatically switched on again (by real-time clock) after an error power-off. Setting this value to zero means immediate restart (power-cycle only). You can disable automatic restart by setting the 'sc2asrRebootFailAction' to 'switch-off' and the 'sc2asrDefaultRebootRetries' to zero; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

asrPostErrorHalt		1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.7
Describes what to do when a POST error has occurred (halt on any error; no halt on any error...). The values unknown(1) and other(9) cannot be set; a SET will deliver 'badValue'; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), halt-on-any-error(2), no-halt-on-any-error(3), other(4)

messageTextLogTable		1.3.6.1.4.1.211.1.31.1.1.1.7.4
Error and event message handling; reported as text strings; Not supported.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MessageTextLogs

messageTextLogs		1.3.6.1.4.1.211.1.31.1.1.1.7.4.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MessageTextLogs

msgTextLogUnitId		1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.1
Unit identifier (index: 1..n); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

msgTextLogLanguage		1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.2
Message log entry language (index; Windows language code); Not supported. e.g. 1031; 1033 for German; English (default; always available)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

msgTextLogSeqNr		1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.3
Message log entry sequence number (index; 0..n); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

msgTextLogTimestamp		1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.4
Message log entry time stamp (time_t = seconds since 1/1/1970; 0:00 AM); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

msgTextLogMessage		1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.5
Message log entry message string (multi-byte string; multi-language; not every language may be implemented); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

msgTextLogErrorCode		1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.6
Message log entry error code; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

msgTextLogSeverity		1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.7
Message log entry severity; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	informational(1), minor(2), major(3), critical(4)

msgTextLogCSSComponent		1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.8
Component which caused the log message may be replaced by the customer (CSS=Customer Self Service); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TrueFalse

messageLogActionHintTable		1.3.6.1.4.1.211.1.31.1.1.1.7.5
Action text strings for error and event messages; Not supported.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MessageLogActionHints

messageLogActionHints		1.3.6.1.4.1.211.1.31.1.1.1.7.5.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MessageLogActionHints

mlaLanguage		1.3.6.1.4.1.211.1.31.1.1.1.7.5.1.1
Action text language (index; Windows language code) e.g. 1031; 1033 for German; English; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mlaErrorCode		1.3.6.1.4.1.211.1.31.1.1.1.7.5.1.2
Action text error code (index); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mlaType		1.3.6.1.4.1.211.1.31.1.1.1.7.5.1.3
Message log entry severity; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	summary(1), cause(2), resolution(3)

mlaIndex		1.3.6.1.4.1.211.1.31.1.1.1.7.5.1.4
Action text entry string index (index; 1..n); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mlaMessage		1.3.6.1.4.1.211.1.31.1.1.1.7.5.1.5
Action message string; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

agentStatus		1.3.6.1.4.1.211.1.31.1.1.1.8.1
Overall status of all monitored components in this agent ok(1): all subsystems and components working properly; no failure degraded(2): at least one component has a problem; system may still work properly error(3): severe problem; system will not work properly failed(4): one or more managed components have failed unknown(5): none of the subsystems had a valid status (e.g. during initialization)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), degraded(2), error(3), failed(4), unknown(5)

statusComponentTable		1.3.6.1.4.1.211.1.31.1.1.1.8.2
Table with status values of the components in this agent. The table summarizes all instances of one component to one status value.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		StatusComponents

statusComponents		1.3.6.1.4.1.211.1.31.1.1.1.8.2.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	StatusComponents

csUnitId		1.3.6.1.4.1.211.1.31.1.1.1.8.2.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

csType		1.3.6.1.4.1.211.1.31.1.1.1.8.2.1.2
Component status type
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	system-boot(1), power(2), temperatures(3), fans(4), power-supplies(5), voltages(6), cpus(7), memory-modules(8), total(9), fan-redundancy(10), power-supply-redundancy(11)

componentStatusValue		1.3.6.1.4.1.211.1.31.1.1.1.8.2.1.3
Component status value (for description of status values see previous object) Status mapping. SEL level MIB Value Warning degraded(2) Warning failed(4) Error error(5)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), degraded(2), error(3), failed(4), unknown(5)

componentStatusSensorTable		1.3.6.1.4.1.211.1.31.1.1.1.8.3
This table contains the component status sensor table of the BMC (baseboard management controller). Additionally it also holds the CSS (Customer Self Service) information; Not supported.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ComponentStatusSensors

componentStatusSensors		1.3.6.1.4.1.211.1.31.1.1.1.8.3.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ComponentStatusSensors

cssUnitId		1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.1
Unit identifier (index: 1..n); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cssSensorNumber		1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.2
BMC component status sensor number (index; 1..n); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cssSensorDesignation		1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.3
Component status sensor designation string; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cssSensorDevice		1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.4
Name of device (entity) the component status sensor belongs to; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cssSensorDeviceInstance		1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.5
Instance number of device (entity) the component status sensor belongs to; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cssSensorPhysicalLed		1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.6
If set; component has a physical status LED showing the sensor status; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TrueFalse

cssSensorCssComponent		1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.7
If set; component may be replaced by the customer (CSS component); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TrueFalse

cssSensorStatus		1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.8
Status returned by the component status sensor; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), ok(2), identify(3), prefailure-warning(4), failure(5), not-present(6)

cssComponentServicePartId		1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.9
Spare part number of the replaceable component; used to create a link to the spare part list on the service's spare part catalogue. This usually is the component's designation string; with blanks substituted by underscores; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cssTableSize		1.3.6.1.4.1.211.1.31.1.1.1.8.4
Number of entries in the component status sensor table; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

maintenanceObjectTable		1.3.6.1.4.1.211.1.31.1.1.1.9.1
Table containing some other maintenance objects.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MaintenanceObjects

maintenanceObjects		1.3.6.1.4.1.211.1.31.1.1.1.9.1.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MaintenanceObjects

mtUnitId		1.3.6.1.4.1.211.1.31.1.1.1.9.1.1.1
Unit identifier (index: 1..n).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

errorCounterStartTime		1.3.6.1.4.1.211.1.31.1.1.1.9.1.1.2
Memory module error counter start time (seconds since 1/1/1970; -1 if unknown). This is the time when the error counters were started or reset last time; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

sendTestTrap		1.3.6.1.4.1.211.1.31.1.1.1.9.1.1.3
Send a test trap (test alarm) to the manager application(s) to test connection and trap configuration; trap cannot be disabled. Initiate test trap sending by writing a non-zero value. Reading this object just returns the value 0; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

addTrapDestination		1.3.6.1.4.1.211.1.31.1.1.1.9.1.1.4
Add the specified IP address (of the management station) to the trap destination list of this server. That client will become an alarm receiver for traps of this server; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

mtMaintenanceStatus		1.3.6.1.4.1.211.1.31.1.1.1.9.1.1.5
maitenance status
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

firmwareVersionTable		1.3.6.1.4.1.211.1.31.1.1.1.9.2
Controller firmware version table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		FirmwareVersions

firmwareVersions		1.3.6.1.4.1.211.1.31.1.1.1.9.2.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	FirmwareVersions

fwUnitId		1.3.6.1.4.1.211.1.31.1.1.1.9.2.1.1
Unit identifier (index: 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

fwType		1.3.6.1.4.1.211.1.31.1.1.1.9.2.1.2
Controller/firmware type
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	bios(1), management-controller(2), remote-management-controller(3), pal(4), sal(5), efi(6), baseboard-management-controller(7), gswb-offline0(8), gswb-offline1(9), gswb-online0(10), gswb-online1(11), total(20)

fwModelName		1.3.6.1.4.1.211.1.31.1.1.1.9.2.1.3
Controller/firmware model name (e.g. 'Copernicus'...) TOTAL' shows all firmware version in system (including BIOS; BMC; MMB).
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

fwVersion		1.3.6.1.4.1.211.1.31.1.1.1.9.2.1.4
Controller/firmware version string (e.g. '3.81.02')
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

fwLocation		1.3.6.1.4.1.211.1.31.1.1.1.9.2.1.5
BMM physical number of controller/firmware on IOU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

deployInfoTable		1.3.6.1.4.1.211.1.31.1.1.1.10.1
Table with data of deployment information; Not supported.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DeployInfo

deployInfo		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DeployInfo

dplInfoUnitId		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.1
Unit identifier (index: 1..n); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

deployInfoChassisId		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.2
Chassis serial number; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

deployInfoMacAddr1		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.3
MAC address 1; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

deployInfoMacAddr2		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.4
MAC address 2; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

deployInfoMacAddr3		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.5
MAC address 3; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

deployInfoMacAddr4		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.6
MAC address 4; Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

deployInfoIpAddr1		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.7
IP address 1; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

deployInfoIpAddr2		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.8
IP address 2; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

deployInfoIpAddr3		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.9
IP address 3; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

deployInfoIpAddr4		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.10
IP address 4; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

deployInfoNetMask1		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.11
IP subnet mask 1; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

deployInfoNetMask2		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.12
IP subnet mask 2; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

deployInfoNetMask3		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.13
IP subnet mask 3; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

deployInfoNetMask4		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.14
IP subnet mask 4; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

deployInfoGateway1		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.15
IP gateway 1; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

deployInfoGateway2		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.16
IP gateway 2; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

deployInfoGateway3		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.17
IP gateway 3; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

deployInfoGateway4		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.18
IP gateway 4; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

deployInfoHostname		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.19
Host name; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

deployInfoMasterImageReference		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.20
URL in UNC notification (but in ASCII) to remote image file (with the extensions of *.img; *.cfg; *.txt); Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

deployInfoStatusOfBlade		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.21
Status of this server: power-down(2): waiting for boot standby(3): power management mode system-boot-failure(4): system boot failure bios-setup(5): BIOS setup or boot phase booting(6): ACPI OS currently booting ; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), power-down(2), standby(3), system-boot-failure(4), bios-setup(5), booting(6)

deployInfoLanStatusOfSlot		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.22
Defines whether the IP-LAN definitions are valid or not; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), false(2), true(3)

deployInfoAutomaticRecovery		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.23
Defines if this server blade should be provided automatic recovery; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), false(2), true(3)

deployInfoStatusOfCloning		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.24
Status of current cloning process; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), not-cloned(2), cloning(3), cloned(4)

deployInfoBootMode		1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.25
Boot mode of the server for remote deployment: normal(2): boot from standard disk subsystem pxeBiosSetup(3): boot from PXE according to BIOS setup settings (for OEM systems) pxeLanx(y): boot from PXE LAN interface x (0..3) ; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), normal(2), pxeBiosSetup(3), pxeLan0(4), pxeLan1(5), pxeLan2(6), pxeLan3(7)

oemDeployInfoTable		1.3.6.1.4.1.211.1.31.1.1.1.10.2
Table with data of server OEM information; Not supported.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OemDeployInfo

oemDeployInfo		1.3.6.1.4.1.211.1.31.1.1.1.10.2.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	OemDeployInfo

odplInfoUnitId		1.3.6.1.4.1.211.1.31.1.1.1.10.2.1.1
Unit identifier (index: 1..n); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

odplParamId		1.3.6.1.4.1.211.1.31.1.1.1.10.2.1.2
OEM parameter ID (index: 1..10); Not supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

oemDeployInfoParamData		1.3.6.1.4.1.211.1.31.1.1.1.10.2.1.3
OEM parameter data; Not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

deployLanInterfaceTable		1.3.6.1.4.1.211.1.31.1.1.1.10.3
Table with system LAN interfaces information: This table lists all real LAN interfaces in same physical order as the BIOS uses it for PXE boot. Only on-board interfaces are listed; no virtual interfaces.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DeployLanInterfaces

deployLanInterfaces		1.3.6.1.4.1.211.1.31.1.1.1.10.3.1
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DeployLanInterfaces

dplLanUnitId		1.3.6.1.4.1.211.1.31.1.1.1.10.3.1.1
Unit identifier (index; 1..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dplLanInterfaceNr		1.3.6.1.4.1.211.1.31.1.1.1.10.3.1.2
LAN interface number (index; 0..n)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dplLanMacAddress		1.3.6.1.4.1.211.1.31.1.1.1.10.3.1.3
LAN interface hardware (MAC) address; ff:ff:ff:ff:ff:ff if value not available
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress