MITEL-BWM-MIB

File: MITEL-BWM-MIB.mib (36614 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
MITEL-IperaVoiceLAN-MIB

Imported symbols

MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE
Integer32 Gauge32 Counter32
TEXTUAL-CONVENTION DateAndTime DisplayString
MODULE-COMPLIANCE OBJECT-GROUP mitelIpera3000Applications

Defined Types

MitelBWMPercentage  
Percentage value (from 0 to 100).
TEXTUAL-CONVENTION    
  Integer32 0..100  

MitelBWMZoneID  
Zone Identifier.
TEXTUAL-CONVENTION    
  Integer32 1..250  

MitelBWMZAPID  
Zone Access Point Identifier.
TEXTUAL-CONVENTION    
  Integer32 1..6  

MitelBWMCurrentTableEntry  
SEQUENCE    
  mitelBWMCurrentZoneID MitelBWMZoneID
  mitelBWMCurrentParentZoneID MitelBWMZoneID
  mitelBWMCurrentZAPID MitelBWMZAPID
  mitelBWMCurrentZAPLabel DisplayString
  mitelBWMCurrentBandwidthInUse Gauge32
  mitelBWMCurrentBandwidthLimit Gauge32
  mitelBWMCurrentBandwidthRatio MitelBWMPercentage

MitelBWMCumCACTableEntry  
SEQUENCE    
  mitelBWMCumZoneID MitelBWMZoneID
  mitelBWMCumParentZoneID MitelBWMZoneID
  mitelBWMCumZAPID MitelBWMZAPID
  mitelBWMCumZAPLabel DisplayString
  mitelBWMCumCACAdmissions Counter32
  mitelBWMCumCACRejections Counter32
  mitelBWMCumCACRejectionRatio MitelBWMPercentage

MitelBWM15MinHistoryTableEntry  
SEQUENCE    
  mitelBWM15MinZoneID MitelBWMZoneID
  mitelBWM15MinParentZoneID MitelBWMZoneID
  mitelBWM15MinZAPID MitelBWMZAPID
  mitelBWM15MinDateAndTime DateAndTime
  mitelBWM15MinZAPLabel DisplayString
  mitelBWM15MinCACAdmissions Counter32
  mitelBWM15MinCACRejections Counter32
  mitelBWM15MinCACRejectionRatio MitelBWMPercentage
  mitelBWM15MinAverageBandwidthUsed Gauge32
  mitelBWM15MinPeakBandwidthUsed Gauge32
  mitelBWM15MinAverageAvailable Gauge32
  mitelBWM15MinFinalBandwidthLimit Gauge32
  mitelBWM15MinPeakBandwidthRatio MitelBWMPercentage
  mitelBWM15MinPeakBwdthAboveLimit Gauge32

MitelBWM24HrHistoryTableEntry  
SEQUENCE    
  mitelBWM24HrZoneID MitelBWMZoneID
  mitelBWM24HrParentZoneID MitelBWMZoneID
  mitelBWM24HrZAPID MitelBWMZAPID
  mitelBWM24HrDateAndTime DateAndTime
  mitelBWM24HrZAPLabel DisplayString
  mitelBWM24HrCACAdmissions Counter32
  mitelBWM24HrCACRejections Counter32
  mitelBWM24HrCACRejectionRatio MitelBWMPercentage
  mitelBWM24HrAverageBandwidthUsed Gauge32
  mitelBWM24HrPeakBandwidthUsed Gauge32
  mitelBWM24HrAverageAvailable Gauge32
  mitelBWM24HrFinalBandwidthLimit Gauge32
  mitelBWM24HrPeakBandwidthRatio MitelBWMPercentage
  mitelBWM24HrPeakBwdthAboveLimit Gauge32

Defined Values

mitelBandWidthManagement 1.3.6.1.4.1.1027.4.1.1.2.5.1
MIB for the Mitel Ipera 3000 Bandwidth Management Application.
MODULE-IDENTITY    

mitelBWMObjects 1.3.6.1.4.1.1027.4.1.1.2.5.1.1
OBJECT IDENTIFIER    

mitelBWMConformance 1.3.6.1.4.1.1027.4.1.1.2.5.1.2
OBJECT IDENTIFIER    

mitelBWMCurrentTable 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.1
This table contains current statistics related to bandwidth management for zone access points managed by this ICP.
OBJECT-TYPE    
  SEQUENCE OF  
    MitelBWMCurrentTableEntry

mitelBWMCurrentTableEntry 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.1.1
A row defining a single current bandwidth table entry.
OBJECT-TYPE    
  MitelBWMCurrentTableEntry  

mitelBWMCurrentZoneID 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.1.1.1
Zone access points are defined between a zone and it's parent, i.e. [a]<--b-->[c]. This is the ID of the zone (a).
OBJECT-TYPE    
  MitelBWMZoneID  

mitelBWMCurrentParentZoneID 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.1.1.2
A zone access point is defined between a zone and it's parent, i.e. [a]<--b-->[c] This is the ID of the parent zone (c).
OBJECT-TYPE    
  MitelBWMZoneID  

mitelBWMCurrentZAPID 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.1.1.3
A zone access point is defined between a zone and it's parent, i.e. [a]<--b-->[c] This is the ID of the zone access point (b).
OBJECT-TYPE    
  MitelBWMZAPID  

mitelBWMCurrentZAPLabel 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.1.1.4
This the zone access point label, as supplied by the user.
OBJECT-TYPE    
  DisplayString  

mitelBWMCurrentBandwidthInUse 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.1.1.5
This is the bandwidth currently in use at the zone access point by managed voice over IP media streams. Units in kilobits per second.
OBJECT-TYPE    
  Gauge32  

mitelBWMCurrentBandwidthLimit 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.1.1.6
This is the bandwidth limit currently configured at the zone access point for managed voice over IP media streams. Units in kilobits per second.
OBJECT-TYPE    
  Gauge32  

mitelBWMCurrentBandwidthRatio 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.1.1.7
This is the ratio of mitelBWMCurrentBandwidthInUse to mitelBWMCurrentBandwidthLimit expressed as a percentage.
OBJECT-TYPE    
  MitelBWMPercentage  

mitelBWMCumCACTable 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.2
This table contains cumulative statistics related to bandwidth management connection admission control for zone access points managed by this ICP.
OBJECT-TYPE    
  SEQUENCE OF  
    MitelBWMCumCACTableEntry

mitelBWMCumCACTableEntry 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.2.1
A row defining a single cumulative connection admission control statistics table entry.
OBJECT-TYPE    
  MitelBWMCumCACTableEntry  

mitelBWMCumZoneID 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.2.1.1
Zone access points are defined between a zone and it's parent, i.e. [a]<--b-->[c]. This is the ID of the zone (a).
OBJECT-TYPE    
  MitelBWMZoneID  

mitelBWMCumParentZoneID 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.2.1.2
A zone access point is defined between a zone and it's parent, i.e. [a]<--b-->[c] This is the ID of the parent zone (c).
OBJECT-TYPE    
  MitelBWMZoneID  

mitelBWMCumZAPID 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.2.1.3
A zone access point is defined between a zone and it's parent, i.e. [a]<--b-->[c] This is the ID of the zone access point (b).
OBJECT-TYPE    
  MitelBWMZAPID  

mitelBWMCumZAPLabel 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.2.1.4
This the zone access point label, as supplied by the user.
OBJECT-TYPE    
  DisplayString  

mitelBWMCumCACAdmissions 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.2.1.5
This is the number of calls admitted through this zone access point by this ICP since the system was started or the zone access point was created, or since the cumulative statistics were cleared.
OBJECT-TYPE    
  Counter32  

mitelBWMCumCACRejections 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.2.1.6
This is the number of calls rejected due to bandwidth being fully utilized at this zone access point by this ICP since the system was started or the zone access point was created, or since the cumulative statistics were cleared.
OBJECT-TYPE    
  Counter32  

mitelBWMCumCACRejectionRatio 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.2.1.7
This is the ratio of mitelBWMCACRejections to the sum of mitelBWMCACRejections and mitelBWMCACAdmissions (i.e. rejections to all calls) expressed as a percentage.
OBJECT-TYPE    
  MitelBWMPercentage  

mitelBWM15MinHistoryTable 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.3
This table contains historical statistics recorded at 15 minute intervals related to bandwidth management for zone access points managed by this ICP.
OBJECT-TYPE    
  SEQUENCE OF  
    MitelBWM15MinHistoryTableEntry

mitelBWM15MinHistoryTableEntry 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.3.1
A row defining a single 15 minute interval for a specific zone access point in the 15 minute historical table.
OBJECT-TYPE    
  MitelBWM15MinHistoryTableEntry  

mitelBWM15MinZoneID 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.3.1.1
Zone access points are defined between a zone and it's parent, i.e. [a]<--b-->[c]. This is the ID of the zone (a).
OBJECT-TYPE    
  MitelBWMZoneID  

mitelBWM15MinParentZoneID 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.3.1.2
A zone access point is defined between a zone and it's parent, i.e. [a]<--b-->[c] This is the ID of the parent zone (c).
OBJECT-TYPE    
  MitelBWMZoneID  

mitelBWM15MinZAPID 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.3.1.3
A zone access point is defined between a zone and it's parent, i.e. [a]<--b-->[c] This is the ID of the zone access point (b).
OBJECT-TYPE    
  MitelBWMZAPID  

mitelBWM15MinDateAndTime 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.3.1.4
The system date and time as set when the interval was recorded. Note that if the system date and time are changed while recording intervals, the interval with the earliest Date and Time value may not necessarily be the oldest entry.
OBJECT-TYPE    
  DateAndTime  

mitelBWM15MinZAPLabel 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.3.1.5
This the zone access point label, as supplied by the user.
OBJECT-TYPE    
  DisplayString  

mitelBWM15MinCACAdmissions 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.3.1.6
This is the number of calls admitted through this zone access point by this ICP during the interval.
OBJECT-TYPE    
  Counter32  

mitelBWM15MinCACRejections 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.3.1.7
This is the number of calls rejected due to bandwidth being fully utilized at this zone access point by this ICP during the interval.
OBJECT-TYPE    
  Counter32  

mitelBWM15MinCACRejectionRatio 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.3.1.8
This is the ratio of mitelBWMCACRejections to the sum of mitelBWMCACRejections and mitelBWMCACAdmissions (i.e. rejections to all calls) expressed as a percentage.
OBJECT-TYPE    
  MitelBWMPercentage  

mitelBWM15MinAverageBandwidthUsed 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.3.1.9
This is the average bandwidth in use at the zone access point by managed voice over IP media streams over the interval. Units in kilobits per second.
OBJECT-TYPE    
  Gauge32  

mitelBWM15MinPeakBandwidthUsed 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.3.1.10
This is the peak bandwidth limit in use at the zone access point by managed voice over IP media streams during the interval. Units in kilobits per second.
OBJECT-TYPE    
  Gauge32  

mitelBWM15MinAverageAvailable 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.3.1.11
This is the average bandwidth available at the zone access point for managed voice over IP media streams during the interval. Units in kilobits per second.
OBJECT-TYPE    
  Gauge32  

mitelBWM15MinFinalBandwidthLimit 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.3.1.12
This is the configured bandwidth limit for the zone access point for managed voice over IP media streams recorded at the end of the interval. Units in kilobits per second.
OBJECT-TYPE    
  Gauge32  

mitelBWM15MinPeakBandwidthRatio 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.3.1.13
This is the ratio of mitelBWMPeakBandwidthUsed to mitelBWMFinalBandwidthLimit expressed as a percentage.
OBJECT-TYPE    
  MitelBWMPercentage  

mitelBWM15MinPeakBwdthAboveLimit 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.3.1.14
This is the difference between mitelBWMPeakBandwidthUsed and mitelBWMFinalBandwidthLimit if it was ever over the limit for the the zone access point for managed voice over IP media streams during the interval. Units in kilobits per second.
OBJECT-TYPE    
  Gauge32  

mitelBWM24HrHistoryTable 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.4
This table contains historical statistics recorded at 24 hour intervals related to bandwidth management for zone access points managed by this ICP.
OBJECT-TYPE    
  SEQUENCE OF  
    MitelBWM24HrHistoryTableEntry

mitelBWM24HrHistoryTableEntry 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.4.1
A row defining a single 24 hour interval for a specific zone access point in the 24 hour historical table.
OBJECT-TYPE    
  MitelBWM24HrHistoryTableEntry  

mitelBWM24HrZoneID 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.4.1.1
Zone access points are defined between a zone and it's parent, i.e. [a]<--b-->[c]. This is the ID of the zone (a).
OBJECT-TYPE    
  MitelBWMZoneID  

mitelBWM24HrParentZoneID 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.4.1.2
A zone access point is defined between a zone and it's parent, i.e. [a]<--b-->[c] This is the ID of the parent zone (c).
OBJECT-TYPE    
  MitelBWMZoneID  

mitelBWM24HrZAPID 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.4.1.3
A zone access point is defined between a zone and it's parent, i.e. [a]<--b-->[c] This is the ID of the zone access point (b).
OBJECT-TYPE    
  MitelBWMZAPID  

mitelBWM24HrDateAndTime 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.4.1.4
The system date and time as set when the interval was recorded. Note that if the system date and time are changed while recording intervals, the interval with the earliest Date and Time value may not necessarily be the oldest entry.
OBJECT-TYPE    
  DateAndTime  

mitelBWM24HrZAPLabel 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.4.1.5
This the zone access point label, as supplied by the user.
OBJECT-TYPE    
  DisplayString  

mitelBWM24HrCACAdmissions 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.4.1.6
This is the number of calls admitted through this zone access point by this ICP during the interval.
OBJECT-TYPE    
  Counter32  

mitelBWM24HrCACRejections 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.4.1.7
This is the number of calls rejected due to bandwidth being fully utilized at this zone access point by this ICP during the interval.
OBJECT-TYPE    
  Counter32  

mitelBWM24HrCACRejectionRatio 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.4.1.8
This is the ratio of mitelBWMCACRejections to the sum of mitelBWMCACRejections and mitelBWMCACAdmissions (i.e. rejections to all calls) expressed as a percentage.
OBJECT-TYPE    
  MitelBWMPercentage  

mitelBWM24HrAverageBandwidthUsed 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.4.1.9
This is the average bandwidth in use at the zone access point by managed voice over IP media streams over the interval. Units in kilobits per second.
OBJECT-TYPE    
  Gauge32  

mitelBWM24HrPeakBandwidthUsed 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.4.1.10
This is the peak bandwidth limit in use at the zone access point by managed voice over IP media streams during the interval. Units in kilobits per second.
OBJECT-TYPE    
  Gauge32  

mitelBWM24HrAverageAvailable 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.4.1.11
This is the average bandwidth available at the zone access point for managed voice over IP media streams during the interval. Units in kilobits per second.
OBJECT-TYPE    
  Gauge32  

mitelBWM24HrFinalBandwidthLimit 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.4.1.12
This is the configured bandwidth limit for the zone access point for managed voice over IP media streams recorded at the end of the interval. Units in kilobits per second.
OBJECT-TYPE    
  Gauge32  

mitelBWM24HrPeakBandwidthRatio 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.4.1.13
This is the ratio of mitelBWMPeakBandwidthUsed to mitelBWMFinalBandwidthLimit expressed as a percentage.
OBJECT-TYPE    
  MitelBWMPercentage  

mitelBWM24HrPeakBwdthAboveLimit 1.3.6.1.4.1.1027.4.1.1.2.5.1.1.4.1.14
This is the difference between mitelBWMPeakBandwidthUsed and mitelBWMFinalBandwidthLimit if it was ever over the limit for the the zone access point for managed voice over IP media streams during the interval. Units in kilobits per second.
OBJECT-TYPE    
  Gauge32  

mitelBWMGroups 1.3.6.1.4.1.1027.4.1.1.2.5.1.2.1
The group subtree. Leaves in this subtree identify object groupings used in the compliance statements.
OBJECT-IDENTITY    

mitelBWMCompliances 1.3.6.1.4.1.1027.4.1.1.2.5.1.2.2
The compliance subtree. Leaves in this subtree are used for defining the ways in which an agent can claim compliance with this or other MITEL MIBs.
OBJECT-IDENTITY    

mitelBWMCompliance 1.3.6.1.4.1.1027.4.1.1.2.5.1.2.2.1
The compliance statement for SNMPv2 entities which implement the Mitel Bandwidth Management MIB.
MODULE-COMPLIANCE    

mitelBWMCurrentStatisticsGroup 1.3.6.1.4.1.1027.4.1.1.2.5.1.2.1.1
A collection of objects providing current statistics pertaining to bandwidth management at zone access points managed by the ICP.
OBJECT-GROUP    

mitelBWMCumulativeStatisticsGroup 1.3.6.1.4.1.1027.4.1.1.2.5.1.2.1.2
A collection of objects providing cumulative CAC statistics pertaining to bandwidth management at zone access points managed by the ICP.
OBJECT-GROUP    

mitelBWMHistoricalStatisticsGroup 1.3.6.1.4.1.1027.4.1.1.2.5.1.2.1.3
A collection of objects providing historical CAC and bandwidth statistics pertaining to bandwidth management at zone access points managed by the ICP.
OBJECT-GROUP