MIMOSA-NETWORKS-BFIVE-MIB

File: MIMOSA-NETWORKS-BFIVE-MIB.mib (31126 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB MIMOSA-NETWORKS-BASE-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Counter32 Counter64
Unsigned32 TimeTicks IpAddress
DisplayString MacAddress RowStatus
TruthValue PhysAddress TEXTUAL-CONVENTION
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
ifIndex mimosaWireless mimosaConformanceGroup

Defined Types

DecimalOne  
Fixed point, one decimal
TEXTUAL-CONVENTION    
  Integer32  

DecimalTwo  
Fixed point, two decimals
TEXTUAL-CONVENTION    
  Integer32  

DecimalFive  
Fixed point, five decimals
TEXTUAL-CONVENTION    
  Integer32  

MimosaChainEntry  
SEQUENCE    
  mimosaChain Integer32
  mimosaTxPower DecimalOne
  mimosaRxPower DecimalOne
  mimosaRxNoise DecimalOne
  mimosaSNR DecimalOne
  mimosaCenterFreq Integer32
  mimosaPolarization INTEGER

MimosaStreamEntry  
SEQUENCE    
  mimosaStream Integer32
  mimosaTxPhy Integer32
  mimosaTxMCS Integer32
  mimosaTxWidth Integer32
  mimosaRxPhy Integer32
  mimosaRxMCS Integer32
  mimosaRxWidth Integer32
  mimosaRxEVM DecimalOne

MimosaChannelEntry  
SEQUENCE    
  mimosaChannel Integer32
  mimosaChannelMode INTEGER
  mimosaChannelWidth Integer32
  mimosaChannelTxPower DecimalOne
  mimosaChannelCenterFreq Integer32

Defined Values

mimosaB5Module 1.3.6.1.4.1.43356.2.4.1
Mimosa device MIB definitions
MODULE-IDENTITY    

mimosaGeneral 1.3.6.1.4.1.43356.2.1.2.1
OBJECT IDENTIFIER    

mimosaLocInfo 1.3.6.1.4.1.43356.2.1.2.2
OBJECT IDENTIFIER    

mimosaWanInfo 1.3.6.1.4.1.43356.2.1.2.3
OBJECT IDENTIFIER    

mimosaTdmaInfo 1.3.6.1.4.1.43356.2.1.2.4
OBJECT IDENTIFIER    

mimosaMgmtInfo 1.3.6.1.4.1.43356.2.1.2.5
OBJECT IDENTIFIER    

mimosaRfInfo 1.3.6.1.4.1.43356.2.1.2.6
OBJECT IDENTIFIER    

mimosaPerfInfo 1.3.6.1.4.1.43356.2.1.2.7
OBJECT IDENTIFIER    

mimosaServices 1.3.6.1.4.1.43356.2.1.2.8
OBJECT IDENTIFIER    

mimosaDeviceName 1.3.6.1.4.1.43356.2.1.2.1.1
The name of the local Mimosa device. This unique identifier could be the same as the sysName object.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

mimosaSerialNumber 1.3.6.1.4.1.43356.2.1.2.1.2
The unique serial number of the Mimosa device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

mimosaFirmwareVersion 1.3.6.1.4.1.43356.2.1.2.1.3
The version of the currently installed and/or running firmware on the Mimosa device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

mimosaFirmwareBuildDate 1.3.6.1.4.1.43356.2.1.2.1.4
The creation date of the currently installed and/or running firmware on the Mimosa device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

mimosaLastRebootTime 1.3.6.1.4.1.43356.2.1.2.1.5
The last time the Mimosa device rebooted.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

mimosaUnlockCode 1.3.6.1.4.1.43356.2.1.2.1.6
The code used to unlock the Mimosa device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

mimosaLEDBrightness 1.3.6.1.4.1.43356.2.1.2.1.7
Indicates the intensity of the status indicator lights on the device exterior. The Auto option adjusts the amount of light based upon ambient conditions. Manual options include Low, Medium, and High.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(1), low(2), medium(3), high(4)  

mimosaInternalTemp 1.3.6.1.4.1.43356.2.1.2.1.8
The internal temperature of the Mimosa device.
Status: current Access: read-only
OBJECT-TYPE    
  DecimalOne  

mimosaRegulatoryDomain 1.3.6.1.4.1.43356.2.1.2.1.9
The country in which the Mimosa device has been configured to run.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

mimosaLongitude 1.3.6.1.4.1.43356.2.1.2.2.1
The Longitude of the Mimosa device location, in 5 decimal points.
Status: current Access: read-only
OBJECT-TYPE    
  DecimalFive  

mimosaLatitude 1.3.6.1.4.1.43356.2.1.2.2.2
The Latitude of the Mimosa device location, in 5 decimal points.
Status: current Access: read-only
OBJECT-TYPE    
  DecimalFive  

mimosaAltitude 1.3.6.1.4.1.43356.2.1.2.2.3
The Altitude of the Mimosa device location in meters.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaSatelliteSNR 1.3.6.1.4.1.43356.2.1.2.2.4
The average Signal to Noise Ratio (SNR) amongst all of the satellites detected by the Mimosa device. Display is in 1 decimal point.
Status: current Access: read-only
OBJECT-TYPE    
  DecimalOne  

mimosaSatelliteStrength 1.3.6.1.4.1.43356.2.1.2.2.5
Strength of the satellites based on the number of satellites available. It is considered good if more than 2 satellites are available.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(1), bad(2)  

mimosaGPSSatellites 1.3.6.1.4.1.43356.2.1.2.2.6
Total number of GPS satellites detected.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaGlonassSatellites 1.3.6.1.4.1.43356.2.1.2.2.7
Total number of GLONASS satellites detected.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaClockAccuracy 1.3.6.1.4.1.43356.2.1.2.2.8
Timing signal accuracy measured in parts per billion (PPB) by the Mimosa device. Display is in 2 decimal points.
Status: current Access: read-only
OBJECT-TYPE    
  DecimalTwo  

mimosaWirelessMode 1.3.6.1.4.1.43356.2.1.2.4.1
Describes wherger the Mimosa device acts as an access point or station.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER accessPoint(1), station(2)  

mimosaWirelessProtocol 1.3.6.1.4.1.43356.2.1.2.4.2
Describes the wireless protocol configured on the Mimosa device. Both TDMA and CSMA are supported. TDMA is a deterministic protocol where each device is assigned a time slot during which it is allowed to transmit. This allows for collocated radios to utilize the same channel and avoid Tx/Rx collisions and interference.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tdma(1), csma(2)  

mimosaTDMAMode 1.3.6.1.4.1.43356.2.1.2.4.3
Specifies the TDMA Gender of the radio (A or B).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER a(1), b(2)  

mimosaTDMAWindow 1.3.6.1.4.1.43356.2.1.2.4.4
Specifies the length of the transmit time slot in milliseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaTrafficSplit 1.3.6.1.4.1.43356.2.1.2.4.5
The radio can be configured to allocate bandwidth symmetrically (50/50) or asymmetrically (75/25 or 25/75) in environments where traffic direction is expected to be heavier in one direction than the other. With an asymmetrical split, the local radio is represented first in the slash notation, (local/remote). For example, in the (75/25) split, the local radio gets 75, while the remote radio gets 25. If Auto is selected the radio will automatically determine, based upon traffic flow, which ratio will be used. The radio will continue to evaluate the flow and adjust accordingly.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER symmetric(1), asymmetric(2), auto(3)  

mimosaChainTable 1.3.6.1.4.1.43356.2.1.2.6.1
A list of RF chain entries, which is part of MIMO tables. MIMO stands for Multiple In Multiple Out.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MimosaChainEntry

mimosaChainEntry 1.3.6.1.4.1.43356.2.1.2.6.1.1
An entry containing chain information applicable to a particular RF chain.
Status: current Access: not-accessible
OBJECT-TYPE    
  MimosaChainEntry  

mimosaChain 1.3.6.1.4.1.43356.2.1.2.6.1.1.1
An index which is used to access a particular entry in the chain table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

mimosaTxPower 1.3.6.1.4.1.43356.2.1.2.6.1.1.2
Specifies the transmit power of the given RF chain. A value of -8 means this particular TxChain is not a valid entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaRxPower 1.3.6.1.4.1.43356.2.1.2.6.1.1.3
Specifies the receive power of the given RF chain. A value of -100 means this particular RxChain is not a valid entry (SNR must be -100).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaRxNoise 1.3.6.1.4.1.43356.2.1.2.6.1.1.4
Specifies the received noise level for the given RF chain.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaSNR 1.3.6.1.4.1.43356.2.1.2.6.1.1.5
Indicates the Signal to Noise Ratio (SNR) for the given RF chain. A value of -100 means this particular RxChain is not a valid entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaCenterFreq 1.3.6.1.4.1.43356.2.1.2.6.1.1.6
The center frequency for the given RF chain. A value of 0 means this particular Chain is not a valid entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaPolarization 1.3.6.1.4.1.43356.2.1.2.6.1.1.7
The ploarization of the given RF chain. It could be horizontal or vertical.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER horizontal(1), vertical(2)  

mimosaStreamTable 1.3.6.1.4.1.43356.2.1.2.6.2
A list of data stream entries, which are part of MIMO tables. MIMO stands for Multiple In Multiple Out.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MimosaStreamEntry

mimosaStreamEntry 1.3.6.1.4.1.43356.2.1.2.6.2.1
The entry containing information applicable to a particular stream.
Status: current Access: not-accessible
OBJECT-TYPE    
  MimosaStreamEntry  

mimosaStream 1.3.6.1.4.1.43356.2.1.2.6.2.1.1
The index used to access a particular entry in the stream table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

mimosaTxPhy 1.3.6.1.4.1.43356.2.1.2.6.2.1.2
Specifies the transmit rate of the given data stream.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaTxMCS 1.3.6.1.4.1.43356.2.1.2.6.2.1.3
Specifies the transmit MCS of the given data stream. A value of -1 means this particular TxStream is not a valid entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaTxWidth 1.3.6.1.4.1.43356.2.1.2.6.2.1.4
Specifies the channel width based on MCS. A value of -1 means this particular TxWidth is not a valid entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaRxPhy 1.3.6.1.4.1.43356.2.1.2.6.2.1.5
Specifies the receive rate of the given data stream.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaRxMCS 1.3.6.1.4.1.43356.2.1.2.6.2.1.6
Specifies the receive MCS of the given data stream. A value of -1 means this particular RxStream is not a valid entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaRxWidth 1.3.6.1.4.1.43356.2.1.2.6.2.1.7
Specifies the receive Rx Width of the given data stream. A value of -1 means this particular RxWidth is not a valid entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaRxEVM 1.3.6.1.4.1.43356.2.1.2.6.2.1.8
Specifies the receive Error Vector Magnitude (EVM) of the given data stream.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaChannelTable 1.3.6.1.4.1.43356.2.1.2.6.3
A list of RF channel entries on the Mimosa device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MimosaChannelEntry

mimosaChannelEntry 1.3.6.1.4.1.43356.2.1.2.6.3.1
The entry containing management information applicable to a particular channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  MimosaChannelEntry  

mimosaChannel 1.3.6.1.4.1.43356.2.1.2.6.3.1.1
The index used to access a particular entry in the RF channel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

mimosaChannelMode 1.3.6.1.4.1.43356.2.1.2.6.3.1.2
Specifies the mode for the given channel. The transmit or receive values indicate Frequency Diversity (FD) mode is in use. The bidirectional value means that the channel is used for both transmit and receive in all other single or dual channel modes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER transmit(1), receive(2), bidirectional(3)  

mimosaChannelWidth 1.3.6.1.4.1.43356.2.1.2.6.3.1.3
Specifies the channel width of the given channel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaChannelTxPower 1.3.6.1.4.1.43356.2.1.2.6.3.1.4
Specifies the transmit power level on the channel. If Channel Width is set to 1xN MHz, Channel 2 is not be used. In Frequency Diversity mode, Power 1 and Power 2 represent transmit power on the local and remote sides, respectively.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaChannelCenterFreq 1.3.6.1.4.1.43356.2.1.2.6.3.1.5
Specifies the center frequency of the channel used on the link. In all modes, the center frequency represents the absolute center of the selected channel width without any offset, and the center can be moved in 5 MHz increments. A value of 0 means this particular channel is not a valid entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaAntennaGain 1.3.6.1.4.1.43356.2.1.2.6.4
The antenna gain on the Mimosa device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaTotalTxPower 1.3.6.1.4.1.43356.2.1.2.6.5
The total transmit power for all the channels on the Mimosa device.
Status: current Access: read-only
OBJECT-TYPE    
  DecimalOne  

mimosaTotalRxPower 1.3.6.1.4.1.43356.2.1.2.6.6
The total receive power for all the channels on the Mimosa device.
Status: current Access: read-only
OBJECT-TYPE    
  DecimalOne  

mimosaTargetSignalStrength 1.3.6.1.4.1.43356.2.1.2.6.7
The calculated target receive signal strength based on device coordinates and settings.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaWanSsid 1.3.6.1.4.1.43356.2.1.2.3.1
The wireless link name used by both radios. Both AP and Station must use the same SSID to communicate with each other.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

mimosaWanMac 1.3.6.1.4.1.43356.2.1.2.3.2
The MAC address used for the wireless link.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

mimosaWanStatus 1.3.6.1.4.1.43356.2.1.2.3.3
The wireless link status between the Mimosa devices.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), disconnected(2)  

mimosaWanUpTime 1.3.6.1.4.1.43356.2.1.2.3.4
The wireless link up time since last reboot.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

mimosaPhyTxRate 1.3.6.1.4.1.43356.2.1.2.7.1
The transmit packet rate at the physical level over a 5 second interval.
Status: current Access: read-only
OBJECT-TYPE    
  DecimalTwo  

mimosaPhyRxRate 1.3.6.1.4.1.43356.2.1.2.7.2
The receive packet rate at the physical level over a 5 second interval.
Status: current Access: read-only
OBJECT-TYPE    
  DecimalTwo  

mimosaPerTxRate 1.3.6.1.4.1.43356.2.1.2.7.3
The trasnmit Packet Error Rate (PER) over a 5 second interval. It is caluculated as packets with errors versuss packets without errors.
Status: current Access: read-only
OBJECT-TYPE    
  DecimalTwo  

mimosaPerRxRate 1.3.6.1.4.1.43356.2.1.2.7.4
The receive Packet Error Rate (PER) over a 5 second interval. It is caluculated as packets with errors versuss packets without errors.
Status: current Access: read-only
OBJECT-TYPE    
  DecimalTwo  

mimosaNetworkMode 1.3.6.1.4.1.43356.2.1.2.5.1
Specifies the mode for the local 2.4 GHz wireless network operation. If Auto is selected, the 2.4 GHz management network is turned on for a limited time (defined in Console Timeout ) after boot and then turned off if there is no activity. If a user associates with the radio within the timeout period, they will not be disconnected.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), auto(3)  

mimosaRecoverySsid 1.3.6.1.4.1.43356.2.1.2.5.2
The recovery SSID that allows the device to be reset to factory defaults. This is available for 10 minutes after device boot. Disabling the 2.4 GHz management network will not impact availability of this option. The serial number of the device must be known in order to perform the factory reset.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

mimosaLocalSsid 1.3.6.1.4.1.43356.2.1.2.5.3
The SSID for managing the local 2.4 GHz wireless interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

mimosaLocalChannel 1.3.6.1.4.1.43356.2.1.2.5.4
The channel used for the local 2.4 GHz wireless interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaConsoleTimeout 1.3.6.1.4.1.43356.2.1.2.5.5
The amount inactivity on the 2.4 GHz wireless interface before turning it off in Auto mode.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaMaxClients 1.3.6.1.4.1.43356.2.1.2.5.6
The maximum number of wireless clients that can simultaneously access the 2.4 GHz management interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mimosaLocalMac 1.3.6.1.4.1.43356.2.1.2.5.7
The MAC address used for 2.4 GHz wireless link.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

mimosaLocalIpAddr 1.3.6.1.4.1.43356.2.1.2.5.8
The IP address assigned to the 2.4 GHz wireless link.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

mimosaLocalNetMask 1.3.6.1.4.1.43356.2.1.2.5.9
The IP netmask assigned to the 2.4 GHz wireless link.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

mimosaLocalGateway 1.3.6.1.4.1.43356.2.1.2.5.10
The IP address of the gateway for the 2.4 GHz wireless link.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

mimosaFlowControl 1.3.6.1.4.1.43356.2.1.2.5.11
Specifies whether Flow Control is enabled on the Mimosa device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mimosaHttpsEnabled 1.3.6.1.4.1.43356.2.1.2.8.1
Specifies whether HTTPS is enabled on the Mimosa device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mimosaMgmtVlanEnabled 1.3.6.1.4.1.43356.2.1.2.8.2
Specifies whether the Management VLAN is enabled on the Mimosa device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mimosaMgmtCloudEnabled 1.3.6.1.4.1.43356.2.1.2.8.3
Specifies whether the Management Cloud is enabled on the Mimosa device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mimosaRestMgmtEnabled 1.3.6.1.4.1.43356.2.1.2.8.4
Specifies whether the REST management is enabled on the Mimosa device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mimosaPingWatchdogEnabled 1.3.6.1.4.1.43356.2.1.2.8.5
Specifies whether the IP Ping watchdog is enabled on the Mimosa device. This is used to reset the device if a configured IP address is not reached in certain number of retries.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mimosaSyslogEnabled 1.3.6.1.4.1.43356.2.1.2.8.6
Specifies whether the Syslog client is enabled on the Mimosa device. Syslog client sends the log messages to configured syslog server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mimosaNtpMode 1.3.6.1.4.1.43356.2.1.2.8.7
Specifies whether the NTP client is configured to use standard servers from NIST, NTP organizations or custom NTP server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER custom(1), standard(2)  

mimosaNtpServer 1.3.6.1.4.1.43356.2.1.2.8.8
Specifies the name or address of the custom NTP server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)