MICOM-SYS-MIB

File: MICOM-SYS-MIB.mib (67395 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC-1215
MICOM-OSCAR-MIB SNMPv2-TC

Imported symbols

TimeTicks Counter Gauge
IpAddress OBJECT-TYPE TRAP-TYPE
micom-oscar DisplayString

Defined Types

McmSysLimEntry  
SEQUENCE    
  mcmSysLimModuleAddress INTEGER
  mcmSysLimModuleName DisplayString
  mcmSysLimPcbPartNumber DisplayString
  mcmSysLimPcbRelease DisplayString
  mcmSysLimSerialNumber DisplayString
  mcmSysLimMfgDate DisplayString

McmSysPhysEntry  
SEQUENCE    
  mcmSysPhysModuleAddress INTEGER
  mcmSysLogModuleAddress INTEGER

McmSysFirmwareImageEntry  
SEQUENCE    
  mcmSysFirmwareImageIndex INTEGER
  mcmSysFirmwareImageBank INTEGER
  mcmSysFirmwareImageSoftware INTEGER
  mcmSysFirmwareImageFilename DisplayString
  mcmSysFirmwareImageRevision DisplayString
  mcmSysFirmwareImageSize INTEGER
  mcmSysFirmwareImageCommitStatus INTEGER
  mcmSysFirmwareImageBurnCount Counter

McmSysCommunityStringEntry  
SEQUENCE    
  mcmSysCommunityStringIndex INTEGER
  mcmSysCommunityStringCommunity DisplayString

McmSysIfExtEntry  
SEQUENCE    
  mcmSysIfExtIfIndex INTEGER
  mcmSysIfExtName DisplayString
  mcmSysIfExtType INTEGER
  mcmSysIfExtLinkUpDownTrapEnable INTEGER
  mcmSysIfExtConnectorPresent INTEGER
  mcmSysIfExtPersistenceType INTEGER
  mcmSysIfExtState INTEGER
  mcmSysIfExtPPA INTEGER
  mcmSysIfExtModule INTEGER
  mcmSysIfExtChannel INTEGER
  mcmSysIfExtPPADeviceType INTEGER

NvmSysIfExtEntry  
SEQUENCE    
  nvmSysIfExtIfIndex INTEGER
  nvmSysIfExtName DisplayString
  nvmSysIfExtType INTEGER
  nvmSysIfExtLinkUpDownTrapEnable INTEGER
  nvmSysIfExtConnectorPresent INTEGER
  nvmSysIfExtPersistenceType INTEGER
  nvmSysIfExtState INTEGER
  nvmSysIfExtPPA INTEGER
  nvmSysIfExtModule INTEGER
  nvmSysIfExtChannel INTEGER
  nvmSysIfExtPPADeviceType INTEGER

McmSysTrapSubscriptionEntry  
SEQUENCE    
  mcmSysTrapSubscriptionIPAddress IpAddress
  mcmSysTrapSubscriptionCommunityString DisplayString
  mcmSysTrapSubscriptionAction INTEGER

Defined Values

micom-system 1.3.6.1.4.1.335.1.4.1
OBJECT IDENTIFIER    

sys-configuration 1.3.6.1.4.1.335.1.4.1.1
OBJECT IDENTIFIER    

sys-control 1.3.6.1.4.1.335.1.4.1.2
OBJECT IDENTIFIER    

sys-statistics 1.3.6.1.4.1.335.1.4.1.3
OBJECT IDENTIFIER    

sys-trap 1.3.6.1.4.1.335.1.4.1.4
OBJECT IDENTIFIER    

mcmSysHWTypeGroup 1.3.6.1.4.1.335.1.4.1.1.1
OBJECT IDENTIFIER    

mcmSysHWTypeModelType 1.3.6.1.4.1.335.1.4.1.1.1.1
NAME = ; DESC = **NOTE: THIS OBJECT HAS BEEN \ DEPRECATED. Its functionality \ has been replaced by the \ mcmSysHWTypeCPUType object \ located below in this group.**\ \ The model name/type of the \ access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString Size(50)  

mcmSysHWTypeRevisionLevel 1.3.6.1.4.1.335.1.4.1.1.1.2
NAME = ; DESC = The revision level of the \ access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mcmSysHWTypeManufRevDate 1.3.6.1.4.1.335.1.4.1.1.1.3
NAME = ; DESC = The manufacture/revision date \ of the access device .; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(25)  

mcmSysHWTypeSerialNumber 1.3.6.1.4.1.335.1.4.1.1.1.4
NAME = ; DESC = The serial number of \ the access device..; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(9)  

mcmSysHWTypeModuleID 1.3.6.1.4.1.335.1.4.1.1.1.5
NAME = ; DESC = The module ID of the access \ device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mcmSysHWTypeMACAddress 1.3.6.1.4.1.335.1.4.1.1.1.6
NAME = ; DESC = The base MAC address assigned \ to the access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

mcmSysHWTypeCPUType 1.3.6.1.4.1.335.1.4.1.1.1.7
NAME = ; DESC = Indicates the CPU type for this \ access device; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(50)  

mcmSysHWTypeGenCfgType 1.3.6.1.4.1.335.1.4.1.1.1.8
NAME = ; DESC = Indicates the model type for this \ access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER reserved(1), passport4400(2)  

mcmSysCfgGroup 1.3.6.1.4.1.335.1.4.1.1.2
OBJECT IDENTIFIER    

mcmSysCfgCPUConfiguration 1.3.6.1.4.1.335.1.4.1.1.2.1
NAME = ; DESC = The CPU configuration for this access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER base(1), companion040(2), companion060(3)  

mcmSysCfgPrimaryWANPort 1.3.6.1.4.1.335.1.4.1.1.2.2
NAME = ; DESC = Indicates the presence of the \ Primary WAN port.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER present(1), notPresent(2)  

mcmSysCfgPrimaryWANPortPhyMedia 1.3.6.1.4.1.335.1.4.1.1.2.3
NAME = ; DESC = Indicates the physical media of Primary WAN port.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), unknown(2), link56k(3), generalserial(4), t1e1(5), isdn(6)  

mcmSysCfgDCESerialPortPhyMedia 1.3.6.1.4.1.335.1.4.1.1.2.4
NAME = ; DESC = Indicates the detected DCE \ serial port on the access \ device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), unknown(2), rs232(3), v35(4), v36(5), x21(6)  

mcmSysCfgQUICCExpansionModule1 1.3.6.1.4.1.335.1.4.1.1.2.5
NAME = ; DESC = QUICC Expansion module detected.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER present(1), notPresent(2)  

mcmSysCfgQUICCExpansionModule2 1.3.6.1.4.1.335.1.4.1.1.2.6
NAME = ; DESC = QUICC Expansion module-2 is detected.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER present(1), notPresent(2)  

mcmSysCfgFeatureRTCBatteryStatus 1.3.6.1.4.1.335.1.4.1.1.2.7
NAME = ; DESC = TimeOfDay/SRAM module detected.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noBattery(1), batteryLow(2), batteryOK(3)  

mcmSysCfgDRAMSize 1.3.6.1.4.1.335.1.4.1.1.2.8
NAME = ; DESC = Total installed DRAM memory size in megabytes.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER size4Mbytes(1), size8Mbytes(2), size16Mbytes(3), size32Mbytes(4), size64Mbytes(5)  

mcmSysCfgFlashMemorySize 1.3.6.1.4.1.335.1.4.1.1.2.9
NAME = ; DESC = Total installed Flash memory size in megabytes.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER size4Mbytes(1), size8Mbytes(2), size16Mbytes(3), size32Mbytes(4), size64Mbytes(5)  

mcmSysLimTable 1.3.6.1.4.1.335.1.4.1.1.3
NAME = ; DESC = Table to view an individual Logical \ Interface Modules(LIM) on the access \ device.; HELP = Table to view the hardware \ CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    McmSysLimEntry

mcmSysLimEntry 1.3.6.1.4.1.335.1.4.1.1.3.1
NAME = ; DESC = Entry pertaining to a specific logical module.; HELP = This includes the Name, Part number, and rev. level.; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  McmSysLimEntry  

mcmSysLimModuleAddress 1.3.6.1.4.1.335.1.4.1.1.3.1.1
NAME = ; DESC = lim (logical interface module) identifies \ the address of the module within the unit; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER limA(1), lim1(2), lim2(3), lim3(4), lim4(5), limB(6), limC(7), limD(8), limE(9)  

mcmSysLimModuleName 1.3.6.1.4.1.335.1.4.1.1.3.1.2
NAME = ; DESC = Displays the name of the module \ in the specific location; NOTE : this object was previously named \ mcmSysCardModuleName.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

mcmSysLimPcbPartNumber 1.3.6.1.4.1.335.1.4.1.1.3.1.3
NAME = ; DESC = Displays the part number of the module in \ the specific location; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

mcmSysLimPcbRelease 1.3.6.1.4.1.335.1.4.1.1.3.1.4
NAME = ; DESC = Displays the release level of the module in \ the specific location.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..4)  

mcmSysLimSerialNumber 1.3.6.1.4.1.335.1.4.1.1.3.1.5
NAME = ; DESC = Displays the serial number of the module in \ the specific location.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..13)  

mcmSysLimMfgDate 1.3.6.1.4.1.335.1.4.1.1.3.1.6
NAME = ; DESC = Displays the manufacturing date of the module in \ the specific location.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..7)  

mcmSysPhysTable 1.3.6.1.4.1.335.1.4.1.1.16
NAME = ; DESC = Table to map physical cards to \ Logical Interface Modules (LIM) on \ the access device HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    McmSysPhysEntry

mcmSysPhysEntry 1.3.6.1.4.1.335.1.4.1.1.16.1
NAME = ; DESC = Entry pertaining to a specific physical module.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  McmSysPhysEntry  

mcmSysPhysModuleAddress 1.3.6.1.4.1.335.1.4.1.1.16.1.1
NAME = ; DESC = The value of this object identifies \ the physical slot address of the module \ within the unit; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..5  

mcmSysLogModuleAddress 1.3.6.1.4.1.335.1.4.1.1.16.1.2
NAME = ; DESC = The value of this object identifies \ the logical interface module (lim) address; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER limA(1), lim1(2), lim2(3), lim3(4), lim4(5), limB(6), limC(7), limD(8), limE(9), none(10)  

mcmSysChassisGroup 1.3.6.1.4.1.335.1.4.1.1.4
OBJECT IDENTIFIER    

mcmSysChassisNumberOfModules 1.3.6.1.4.1.335.1.4.1.1.4.1
NAME = ; DESC = Chassis style: number of modules.; NOTE : this object was previously named \ mcmSysChassisNumberOfSlots.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER moduleThree(1), moduleFive(2)  

mcmSysChassisCoolingFan 1.3.6.1.4.1.335.1.4.1.1.4.2
NAME = ; DESC =Chassis cooling fan status.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), notRunning(2)  

mcmSysChassisPowerSupplyType 1.3.6.1.4.1.335.1.4.1.1.4.3
NAME = ; DESC = Specifies the type of power supply \ based on type of voltage; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER type-A(1), type-B(2)  

mcmSysChassisPowerSupplyStatus 1.3.6.1.4.1.335.1.4.1.1.4.4
NAME = ; DESC = Fault indicates that at least one \ power supply module is down; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), fault(2)  

mcmSysChassisPowerSupplyModuleCount 1.3.6.1.4.1.335.1.4.1.1.4.5
NAME = ; DESC = Specifies the number of power \ supply modules installed; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..5  

mcmSysChassisPowerSupplyRedundant 1.3.6.1.4.1.335.1.4.1.1.4.6
NAME = ; DESC = Indicates whether there are \ redundant power supply modules; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmSysTimeOfDayGroup 1.3.6.1.4.1.335.1.4.1.1.5
OBJECT IDENTIFIER    

mcmSysTimeOfDay 1.3.6.1.4.1.335.1.4.1.1.5.1
OBJECT IDENTIFIER    

mcmSysTimeOfDaySec 1.3.6.1.4.1.335.1.4.1.1.5.1.1
NAME = ; DESC = System Time of day in seconds.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

mcmSysTimeOfDayMin 1.3.6.1.4.1.335.1.4.1.1.5.1.2
NAME = ; DESC = System Time of day in minutes.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

mcmSysTimeOfDayHour 1.3.6.1.4.1.335.1.4.1.1.5.1.3
NAME = ; DESC = System Time of day in hours.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

mcmSysTimeOfDayDay 1.3.6.1.4.1.335.1.4.1.1.5.1.4
NAME = ; DESC = System Time of day, the Day.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sunday(1), monday(2), tuesday(3), wednesday(4), thursday(5), friday(6), saturday(7)  

mcmSysTimeOfDayDate 1.3.6.1.4.1.335.1.4.1.1.5.1.5
NAME = ; DESC = System Time of day. The date.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..31  

mcmSysTimeOfDayMonth 1.3.6.1.4.1.335.1.4.1.1.5.1.6
NAME = ; DESC = System Time of day. The Month.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..12  

mcmSysTimeOfDayYear 1.3.6.1.4.1.335.1.4.1.1.5.1.7
NAME = ; DESC = System Time of day. The Year.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1970..2070  

mcmSysAsciiTimeOfDay 1.3.6.1.4.1.335.1.4.1.1.5.2
NAME = ; DESC = This object will give the ascii version of \ the time of day. This would be the same time \ as reflected by all the other objects of \ this group put togther; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(20..25)  

mcmSysFirmwareGroup 1.3.6.1.4.1.335.1.4.1.1.6
OBJECT IDENTIFIER    

mcmSysOperationalType 1.3.6.1.4.1.335.1.4.1.1.6.1
NAME = ; DESC = Network Operational mode of this \ access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER accessRouter(1), accessRouterAndNAS(2), nmCoreRouter(3), concentratingRouter(4), backboneRouter(5), other(6)  

mcmSysFirmwareConfigCommitBank 1.3.6.1.4.1.335.1.4.1.1.6.2
NAME = ; DESC = The Default Confi. Image (global).; HELP = Committed Config. Image Bank.; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bank3(1), bank4(2), none(3)  

mcmSysFirmwareConfigSaveBank 1.3.6.1.4.1.335.1.4.1.1.6.3
NAME = ; DESC = Default Software Image Bank.; HELP = Committed Code Image (global).; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bank3(1), bank4(2)  

mcmSysFirmwareConfigActiveBank 1.3.6.1.4.1.335.1.4.1.1.6.4
NAME = ; DESC = The active Configuration Image Bank.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bank3(1), bank4(2), none(3)  

mcmSysFirmwareConfigReadBank 1.3.6.1.4.1.335.1.4.1.1.6.5
NAME = ; DESC = The Bank that the Configuration Read from.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bank3(1), bank4(2)  

mcmSysFirmwareCodeReadBank 1.3.6.1.4.1.335.1.4.1.1.6.6
NAME = ; DESC =The Bank that the Code Read from.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bank1(1), bank2(2)  

mcmSysFirmwareCodeCommitBank 1.3.6.1.4.1.335.1.4.1.1.6.7
NAME = ; DESC =The Bank that the Code is committed from.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bank1(1), bank2(2), none(3)  

mcmSysFirmwareVersion 1.3.6.1.4.1.335.1.4.1.1.6.8
NAME = ; DESC = The Code Version that this access \ device is running on.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

mcmSysFirmwareConfigVersion 1.3.6.1.4.1.335.1.4.1.1.6.9
NAME = ; DESC = The Configuration Version that this \ access device is running on.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

mcmSysFirmwareImageTable 1.3.6.1.4.1.335.1.4.1.1.7
NAME = ; DESC = The Firmware Image Table contains \ information about the Code Image.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    McmSysFirmwareImageEntry

mcmSysFirmwareImageEntry 1.3.6.1.4.1.335.1.4.1.1.7.1
NAME = ; DESC = The entry that pertains to Code Image.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  McmSysFirmwareImageEntry  

mcmSysFirmwareImageIndex 1.3.6.1.4.1.335.1.4.1.1.7.1.1
NAME = ; DESC = The Index value for a specific Image.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mcmSysFirmwareImageBank 1.3.6.1.4.1.335.1.4.1.1.7.1.2
NAME = ; DESC = The Specific ImageBank that holds the Code \ Image or Config Image.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bank0(1), bank1(2), bank2(3), bank3(4), bank4(5)  

mcmSysFirmwareImageSoftware 1.3.6.1.4.1.335.1.4.1.1.7.1.3
NAME = ; DESC = This indicates that the specific Software \ is a boot Code, Image Code or a Config Code.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER boot(1), code(2), config(3)  

mcmSysFirmwareImageFilename 1.3.6.1.4.1.335.1.4.1.1.7.1.4
NAME = ; DESC =This indicates the File name of the Firmware.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

mcmSysFirmwareImageRevision 1.3.6.1.4.1.335.1.4.1.1.7.1.5
NAME = ; DESC = This indicates the Revision level of the \ specific Firmware.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

mcmSysFirmwareImageSize 1.3.6.1.4.1.335.1.4.1.1.7.1.6
NAME = ; DESC = This indicates the size of the Firmware in bytes.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mcmSysFirmwareImageCommitStatus 1.3.6.1.4.1.335.1.4.1.1.7.1.7
NAME = ; DESC = This indicates the Firmware Image Commit Status.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER committed(1), notCommitted(2), committedAndActive(3), committedAndNotActive(4)  

mcmSysFirmwareImageBurnCount 1.3.6.1.4.1.335.1.4.1.1.7.1.8
NAME = ; DESC = This indicates the global burn count.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mcmSysSmartCfgGroup 1.3.6.1.4.1.335.1.4.1.1.8
OBJECT IDENTIFIER    

mcmSysSmartCfgAction 1.3.6.1.4.1.335.1.4.1.1.8.1
NAME = ; DESC = Directs system to update secondary (Flash) storage \ by saving present configuration. Or directs discard \ of present re-configures.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER update(1)  

mcmSysSmartCfgStatus 1.3.6.1.4.1.335.1.4.1.1.8.2
NAME = ; DESC = Indicates if system is currently being \ re-configured.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), failed(2)  

mcmSysCommunityStringTable 1.3.6.1.4.1.335.1.4.1.1.9
NAME = ; DESC = The System Community String Table.; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    McmSysCommunityStringEntry

mcmSysCommunityStringEntry 1.3.6.1.4.1.335.1.4.1.1.9.1
NAME = ; DESC = Entry that pertains to the Community \ string.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  McmSysCommunityStringEntry  

mcmSysCommunityStringIndex 1.3.6.1.4.1.335.1.4.1.1.9.1.1
NAME = ; DESC = The Index value for each Community Strings.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nSP-Configurator(1), nSP-Operator(2), nSP-Monitor(3), customer-Configurator(4), customer-Operator(5), customer-Monitor(6)  

mcmSysCommunityStringCommunity 1.3.6.1.4.1.335.1.4.1.1.9.1.2
NAME = ; DESC = Community String used as access password.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..25)  

mcmSysValidateCommunityGroup 1.3.6.1.4.1.335.1.4.1.1.10
OBJECT IDENTIFIER    

mcmSysValidateCommunity 1.3.6.1.4.1.335.1.4.1.1.10.1
NAME = ; DESC = This parameter contains the password \ obtained by the command line user interface.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: write-only
OBJECT-TYPE    
  DisplayString Size(0..25)  

mcmSysLastCommunityPriviledgeLevel 1.3.6.1.4.1.335.1.4.1.1.10.2
NAME = ; DESC = This parameter contains the priviledge \ level from the last valid password.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nspConfigurator(1), nspOperator(2), nspMonitor(3), customerConfigurator(4), customerOperator(5), customerMonitor(6)  

mcmSysConsolePortGroup 1.3.6.1.4.1.335.1.4.1.1.11
OBJECT IDENTIFIER    

mcmSysConsolePortBaudRate 1.3.6.1.4.1.335.1.4.1.1.11.1
NAME = ; DESC = Set Console (and Debugger) Speed; HELP = Set Console Speed; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bps2400(1), bps4800(2), bps9600(3), bps19200(4), bps38400(5)  

mcmSysConsolePortStopBits 1.3.6.1.4.1.335.1.4.1.1.11.2
NAME = ; DESC = Set Console number of stop bits; HELP = Set Console number of stop bits; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2  

mcmSysConsolePortDataBits 1.3.6.1.4.1.335.1.4.1.1.11.3
NAME = ; DESC = Set Console number of Data bits (excluding start, \ stop and parity bits); HELP = Set Console number of Data bits (excluding start, \ stop and parity bits); CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..8  

mcmSysConsolePortParity 1.3.6.1.4.1.335.1.4.1.1.11.4
NAME = ; DESC = Set Console parity bit; HELP = Set Console parity bit; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), even(2), odd(3)  

mcmSysCommitTrackingGroup 1.3.6.1.4.1.335.1.4.1.1.12
OBJECT IDENTIFIER    

mcmSysCommitTrackingCounter 1.3.6.1.4.1.335.1.4.1.1.12.1
NAME = ; DESC = The Counter that pertains to the Commit Tracking.; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mcmSysCommitTrackingSrcIPAddressOfLastCommit 1.3.6.1.4.1.335.1.4.1.1.12.2
NAME = ; DESC = The IP address of the SNMP manager that issued \ the last successful SET operation.; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE;
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

mcmSysCommitTrackingCommunityOfLastCommit 1.3.6.1.4.1.335.1.4.1.1.12.3
NAME = ; DESC = The community of the last successful SET.; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mcmSysCommitTrackingTimeOfLastCommit 1.3.6.1.4.1.335.1.4.1.1.12.4
NAME = ; DESC = The system uptime in ticks when the last \ SET was serviced.; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE;
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

mcmSysIfExtTable 1.3.6.1.4.1.335.1.4.1.1.13
NAME = ; DESC = The Interface table that contains \ information about IfExtension in this \ access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    McmSysIfExtEntry

mcmSysIfExtEntry 1.3.6.1.4.1.335.1.4.1.1.13.1
NAME = ; DESC = The specific Entry that pertains to \ IfExt in this access device.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  McmSysIfExtEntry  

mcmSysIfExtIfIndex 1.3.6.1.4.1.335.1.4.1.1.13.1.1
NAME = ; DESC = The Index value of the specifc entry.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

mcmSysIfExtName 1.3.6.1.4.1.335.1.4.1.1.13.1.2
NAME = ; DESC = The Name of the specific IfExt entry.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(25)  

mcmSysIfExtType 1.3.6.1.4.1.335.1.4.1.1.13.1.3
NAME = ; DESC = The values of this field are kept \ the same as the values for the \ ifExtType defined in \ the extension to MIB II (RFC1573); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), regular1822(2), hdh1822(3), ddnX25(4), rfc877x25(5), ethernetCsmacd(6), iso88023Csmacd(7), iso88024TokenBus(8), iso88025TokenRing(9), iso88026Man(10), starLan(11), proteon10Mbit(12), proteon80Mbit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), ds1(18), e1(19), basicISDN(20), primaryISDN(21), propPointToPointSerial(22), ppp(23), softwareLoopback(24), eon(25), ethernet3Mbit(26), nsip(27), slip(28), ultra(29), ds3(30), sip(31), frameRelay(32), rs232(33), para(34), arcnet(35), arcnetPlus(36), atm(37), miox25(38), sonet(39), x25ple(40), iso88022llc(41), localTalk(42), smdsDxi(43), frameRelayService(44), v35(45), hssi(46), hippi(47), modem(48), aal5(49), sonetPath(50), sonetVT(51), smdsIcip(52), propVirtual(53), propMultiplexor(54), isdn(63), isdns(75), isdnu(76), lapd(77), ds0(81)  

mcmSysIfExtLinkUpDownTrapEnable 1.3.6.1.4.1.335.1.4.1.1.13.1.4
NAME = ; DESC = This indicates if the LinkUpDownTrap \ is enabled or not.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmSysIfExtConnectorPresent 1.3.6.1.4.1.335.1.4.1.1.13.1.5
NAME = ; DESC = This indicates if the IfExt entry \ has a phisical connector present.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmSysIfExtPersistenceType 1.3.6.1.4.1.335.1.4.1.1.13.1.6
NAME = ; DESC = This indicates if the Persistence Type \ is volatile or non-volatile.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER volatile(1), non-volatile(2)  

mcmSysIfExtState 1.3.6.1.4.1.335.1.4.1.1.13.1.7
NAME = ; DESC = This indicates that if the IfExt entry \ is configured or not.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER configured(1), not-configured(2)  

mcmSysIfExtPPA 1.3.6.1.4.1.335.1.4.1.1.13.1.8
NAME = ; DESC = The PPA of the port; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mcmSysIfExtModule 1.3.6.1.4.1.335.1.4.1.1.13.1.9
NAME = ; DESC = The logical interface module address \ of this interface \ NOTE : this object was previously named \ mcmSysIfExtSlot.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER limA(1), lim1(2), lim2(3), lim3(4), lim4(5), limB(6), limC(7), limD(8), limE(9)  

mcmSysIfExtChannel 1.3.6.1.4.1.335.1.4.1.1.13.1.10
NAME = ; DESC = The channel number of this interface... \ FR DCE: N/A, WAN Driver: SCC number, \ WAN Connector: corresponding SCC number; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mcmSysIfExtPPADeviceType 1.3.6.1.4.1.335.1.4.1.1.13.1.11
NAME = ; DESC = The PPA device type of this interface.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER wanDriver-FRDTE(1), ethDriver(2), loopDriver(3), nullDevice(4), noDevice(5), frDevice-DTE(6), wanConn(7), isdn-B1-ch(8), isdn-B2-ch(9), isdn-D-ch(10), isdn-conn(11), voiceVP(12), nmVP(13), dataVP(14), t1Net(15), t1Loc(16), t1Frac(17), serialDevice(18), euvmCh(19), t1DP1(20), t1DP2(21), e1Net(22), e1Loc(23), e1Frac(24), e1DP1(25), e1DP2(26), iuvmCh(27), dvmCh(28), frDevice-DCE(29), wanDriver-FRDCE(30), wanDriver-FRTDS(31), dce-Conn(32), csu-t1(33), csu-56k(34), isdn-LAPD(35), isdn-BRI(36), csu-e1(37), panlDCE(38), panlDTE(39), standardFR(40), voice-isdn-BRI-ch(41), voice-isdn-BRI(42), voice-isdn-LAPD(43), voice-isdn-D-ch(44), voice-isdn-B1-ch(45), voice-isdn-B2-ch(46)  

mcmSysRollbackGroup 1.3.6.1.4.1.335.1.4.1.1.14
OBJECT IDENTIFIER    

mcmSysRollbackFeature 1.3.6.1.4.1.335.1.4.1.1.14.1
NAME = ; DESC = This indicates if the RollBack feature is \ enabled or disabled.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mcmSysRollbackStatus 1.3.6.1.4.1.335.1.4.1.1.14.2
NAME = ; DESC = This indicates whether Confirm system \ Rollback is required or not. Or will \ Confirm at the next reset.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER required(1), not-required(2), next-reset(3)  

mcmSysRollbackConfirm 1.3.6.1.4.1.335.1.4.1.1.14.3
NAME = ; DESC = This confirms that previous System Configuration \ or Code bank changes are accepted and that the \ System is NOT to timeout, reset and go back to previous Config or Code bank.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER confirm(1)  

nvmSysIfExtTable 1.3.6.1.4.1.335.1.4.1.1.15
NAME = ; DESC = The Interface table that contains \ information about IfExtension in this \ access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvmSysIfExtEntry

nvmSysIfExtEntry 1.3.6.1.4.1.335.1.4.1.1.15.1
NAME = ; DESC = The specific Entry that pertains to \ IfExt in this access device.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvmSysIfExtEntry  

nvmSysIfExtIfIndex 1.3.6.1.4.1.335.1.4.1.1.15.1.1
NAME = ; DESC = The Index value of the specifc entry.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

nvmSysIfExtName 1.3.6.1.4.1.335.1.4.1.1.15.1.2
NAME = ; DESC = The Name of the specific IfExt entry.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(25)  

nvmSysIfExtType 1.3.6.1.4.1.335.1.4.1.1.15.1.3
NAME = ; DESC = The values of this field are kept \ the same as the values for the \ ifExtType defined in \ the extension to MIB II (RFC1573); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), regular1822(2), hdh1822(3), ddnX25(4), rfc877x25(5), ethernetCsmacd(6), iso88023Csmacd(7), iso88024TokenBus(8), iso88025TokenRing(9), iso88026Man(10), starLan(11), proteon10Mbit(12), proteon80Mbit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), ds1(18), e1(19), basicISDN(20), primaryISDN(21), propPointToPointSerial(22), ppp(23), softwareLoopback(24), eon(25), ethernet3Mbit(26), nsip(27), slip(28), ultra(29), ds3(30), sip(31), frameRelay(32), rs232(33), para(34), arcnet(35), arcnetPlus(36), atm(37), miox25(38), sonet(39), x25ple(40), iso88022llc(41), localTalk(42), smdsDxi(43), frameRelayService(44), v35(45), hssi(46), hippi(47), modem(48), aal5(49), sonetPath(50), sonetVT(51), smdsIcip(52), propVirtual(53), propMultiplexor(54), isdn(63), isdns(75), isdnu(76), lapd(77), ds0(81)  

nvmSysIfExtLinkUpDownTrapEnable 1.3.6.1.4.1.335.1.4.1.1.15.1.4
NAME = ; DESC = This indicates if the LinkUpDownTrap \ is enabled or not.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

nvmSysIfExtConnectorPresent 1.3.6.1.4.1.335.1.4.1.1.15.1.5
NAME = ; DESC = This indicates if the IfExt entry \ has a phisical connector present.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

nvmSysIfExtPersistenceType 1.3.6.1.4.1.335.1.4.1.1.15.1.6
NAME = ; DESC = This indicates if the Persistence Type \ is volatile or non-volatile.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER volatile(1), non-volatile(2)  

nvmSysIfExtState 1.3.6.1.4.1.335.1.4.1.1.15.1.7
NAME = ; DESC = This indicates that if the IfExt entry \ is configured or not.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER configured(1), not-configured(2)  

nvmSysIfExtPPA 1.3.6.1.4.1.335.1.4.1.1.15.1.8
NAME = ; DESC = The PPA of the port; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmSysIfExtModule 1.3.6.1.4.1.335.1.4.1.1.15.1.9
NAME = ; DESC = The logical interface module address \ of this interface \ NOTE : this object was previously named \ nvmSysIfExtSlot.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER limA(1), lim1(2), lim2(3), lim3(4), lim4(5), limB(6), limC(7), limD(8), limE(9)  

nvmSysIfExtChannel 1.3.6.1.4.1.335.1.4.1.1.15.1.10
NAME = ; DESC = The channel number of this interface... \ FR DCE: N/A, WAN Driver: SCC number, \ WAN Connector: corresponding SCC number; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmSysIfExtPPADeviceType 1.3.6.1.4.1.335.1.4.1.1.15.1.11
NAME = ; DESC = The PPA device type of this interface.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER wanDriver-FRDTE(1), ethDriver(2), loopDriver(3), nullDevice(4), noDevice(5), frDevice-DTE(6), wanConn(7), isdn-B1-ch(8), isdn-B2-ch(9), isdn-D-ch(10), isdn-conn(11), voiceVP(12), nmVP(13), dataVP(14), t1Net(15), t1Loc(16), t1Frac(17), serialDevice(18), euvmCh(19), t1DP1(20), t1DP2(21), e1Net(22), e1Loc(23), e1Frac(24), e1DP1(25), e1DP2(26), iuvmCh(27), dvmCh(28), frDevice-DCE(29), wanDriver-FRDCE(30), wanDriver-FRTDS(31), dce-Conn(32), csu-t1(33), csu-56k(34), isdn-LAPD(35), isdn-BRI(36), csu-e1(37), panlDCE(38), panlDTE(39), standardFR(40), voice-isdn-BRI-ch(41), voice-isdn-BRI(42), voice-isdn-LAPD(43), voice-isdn-D-ch(44), voice-isdn-B1-ch(45), voice-isdn-B2-ch(46)  

mcmSysResetGroup 1.3.6.1.4.1.335.1.4.1.2.1
OBJECT IDENTIFIER    

mcmSysResetAction 1.3.6.1.4.1.335.1.4.1.2.1.1
NAME = ; DESC = Reset Unit, restart the CPU only, warm start \ or factory default (cold start).; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER cpu-only(1), currentConfig(2), factoryDefaults(3)  

mcmSysRestartReason 1.3.6.1.4.1.335.1.4.1.2.1.2
NAME = ; DESC = Reset Restart Reason Codes; HELP = Reason Code for last Reset; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hwButtonCurrentReset(1), cliCurrentReset(2), hwButtonOrCLICPUReset(3), watchdogTimer(4), noQUICCClock(5), doubleBusFault(6), powerUp(8), unknownHardwareFault(9), switchCodeConfigHWButtonReset(11), switchCodeConfigCLICurrReset(12), switchCodeConfigCPUReset(13), switchCodeConfigwatchdogTimer(14), switchCodeConfigNoQUICCClock(15), switchCodeConfigdoubleBusFault(16), switchCodeConfigRollbackTimer(17), switchCodeConfigPowerUp(18), switchCodeConfigUnknownHWFault(19), switchCodeHWButtonReset(21), switchCodeCLICurrReset(22), switchCodeCPUReset(23), switchCodewatchdogTimer(24), switchCodeNoQUICCClock(25), switchCodedoubleBusFault(26), switchCodeRollbackTimer(27), switchCodePowerUp(28), switchCodeUnknownHWFault(29), switchConfigHWButtonReset(31), switchConfigCLICurrReset(32), switchConfigCPUReset(33), switchConfigwatchdogTimer(34), switchConfigNoQUICCClock(35), switchConfigdoubleBusFault(36), switchConfigRollbackTimer(37), switchConfigPowerUp(38), switchConfigUnknownHWFault(39), hwButtonResetToDefault(41), cliResetToDefault(42), cpuResetWithCommittedCOnfig(43), powerUpWithDefaultedConfig(48), configDefaultUnknownHWFault(49), hwButtonDefaultUnknownSWState(51), cliDefaultResetUnknownSWState(52), powerUpDefaultUnknownSWState(58), configDefaultUnknownSWHWState(59)  

mcmSysTimeOfLastReset 1.3.6.1.4.1.335.1.4.1.2.1.3
NAME = ; DESC = This object will indicate the time of \ when the access device was last reset. HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(20..25)  

mcmSysCfgLockGroup 1.3.6.1.4.1.335.1.4.1.2.2
OBJECT IDENTIFIER    

mcmSysCfgLock 1.3.6.1.4.1.335.1.4.1.2.2.1
NAME = ; DESC = Indicates if system config is locked.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..80)  

mcmSysUtilGroup 1.3.6.1.4.1.335.1.4.1.3.1
OBJECT IDENTIFIER    

mcmSysCpuUtilization 1.3.6.1.4.1.335.1.4.1.3.1.1
NAME = ; DESC = Indicates the CPU utilization in percent.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mcmSysLinkTransmitBandwidthUtilization 1.3.6.1.4.1.335.1.4.1.3.1.2
NAME = ; DESC = Indicates the Bandwidth Utilization in percent.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mcmSysInternalRAMUtilization 1.3.6.1.4.1.335.1.4.1.3.1.3
NAME = ; DESC = Indicates internal RAM Utilization in percent.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mcmSysLinkReceiveBandwidthUtilization 1.3.6.1.4.1.335.1.4.1.3.1.4
NAME = ; DESC = Indicates the Link Receive Bandwidth utilization.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mcmSysTrapSubscriptionTable 1.3.6.1.4.1.335.1.4.1.4.1
NAME = ; DESC = This Table displays the System Trap \ subscription information of this \ access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    McmSysTrapSubscriptionEntry

mcmSysTrapSubscriptionEntry 1.3.6.1.4.1.335.1.4.1.4.1.1
NAME = ; DESC = Entry that pertains to a specific TRAP.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  McmSysTrapSubscriptionEntry  

mcmSysTrapSubscriptionIPAddress 1.3.6.1.4.1.335.1.4.1.4.1.1.1
NAME = ; DESC = IP address of the SNMP Manager subscribing Traps.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mcmSysTrapSubscriptionCommunityString 1.3.6.1.4.1.335.1.4.1.4.1.1.2
NAME = ; DESC = Community string for this subscriber.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mcmSysTrapSubscriptionAction 1.3.6.1.4.1.335.1.4.1.4.1.1.3
NAME = ; DESC = Action to take: add or delete subscriber.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER subscribe(1), cancel(2)  

mcmSysTrapThresholdGroup 1.3.6.1.4.1.335.1.4.1.4.2
OBJECT IDENTIFIER    

mcmSysTrapCPUUtilThreshold 1.3.6.1.4.1.335.1.4.1.4.2.1
NAME = ; DESC = Indicates the configured threshold for \ CPU Utilization.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

mcmSysTrapBandwidthUtilThreshold 1.3.6.1.4.1.335.1.4.1.4.2.2
NAME = ; DESC = Indicates the configured threshold for \ bandwidth utilization.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

mcmSysTrapRAMUtilThreshold 1.3.6.1.4.1.335.1.4.1.4.2.3
NAME = ; DESC = Indicates the configured threshold for \ RAM utilization.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

mcmSysMainPowerSupplyFailure 1
NAME = ; DESC = System TRAP message: indication of Power Supply \ failure.\ Severity Level: CRITICAL.; HELP = Power Supply Jumper may not be set properly.\ Please contact the System Administrator, or\ field Personnel.;
TRAP-TYPE    

mcmSysChassisFanFailure 2
NAME = ; DESC = System TRAP message: indication of a chassis \ FAN failure on the access device.\ Severity Level: MINOR.; HELP = Fan is not running. Please contact the System\ administrator, or Filed Personnel.;
TRAP-TYPE    

mcmSysSystemReset 3
NAME = ; DESC = System TRAP message: indication of system Reset \ (warm start).\ Severity Level: INFORMATIVE.; HELP = A system reset has occured. If normal \ operation did not resume after the Reset, Please \ contact the System Administrator, or Field \ Personnel.;
TRAP-TYPE    

mcmSysBatteryLow 4
NAME = ; DESC = System TRAP message: Indication of Battery Low.\ Severity Level: MINOR.; HELP = The access device is experiencing a Battery \ Low condition. Please contact the System \ Administrator or Field Personnel.;
TRAP-TYPE    

mcmSysConfigChanged 5
NAME = ; DESC = An indication of configuration change in \ the access device.\ Severity Level: MAJOR.; HELP = Configuration has changed in access device. Please \ consult the System Administrator, or Field Personnel \ if the configuration has affected your applications.;
TRAP-TYPE    

mcmSysCPUUtilExceeded 6
NAME = ; DESC = System TRAP message: Indication of CPU Utilization \ exceeded for configured threshold.\ Severity Level: MAJOR.; HELP = The access device has exceeded its configured threshold \ value for CPU Utilization. This value can be changed using set sys traps cpu 1 - 100.\ Or Consult your system Administrator, or field Personnel if \ this value needs to be changed.;
TRAP-TYPE    

mcmSysBandwidthUtilExceeded 7
NAME = ; DESC = System TRAP message: Indication of Bandwidth \ Utilization exceeded for configured threshold.\ Severity Level: MAJOR.; HELP = The access device has exceeded its Configured \ threshold value for its bandwidth utilization. \ This value can be changed using set sys traps \ bandwidth 1-100 or Consult your system \ Administrator, or Field Personnel if this value needs \ to be changed.;
TRAP-TYPE    

mcmSysRAMUtilExceeded 8
NAME = ; DESC = System TRAP message: Indication of RAM \ Utilization exceeded for configured threshold.\ Severity Level: MAJOR.; HELP = It is an indication of surpassing the configured \ value for RAM utilization. This value can be changed using set sys traps ram 1-100 or Consult your system \ administrator, or Field Personnel if this value needs \ to be changed.;
TRAP-TYPE    

mcmSysRollbackEnabled 9
NAME = ; DESC = System TRAP message: Indication of System \ Rollback Feature enabled.\ Severity Level: INFORMATIVE.; HELP = This is an indication of the Rollback feature \ being enabled. Please disable this feature if \ it is not desired, or consult your System Admin.\ or Field Personnel.;
TRAP-TYPE    

mcmSysRollbackDisabled 10
NAME = ; DESC = System TRAP message: Indication of System \ Rollback Feature disabled.\ Severity Level: INFORMATIVE.; HELP = This is an indication of the Rollback feature \ being disabled. Please enable this feature if \ it is required. Otherwise, consult your system \ admin. or Field Personnel.;
TRAP-TYPE    

mcmSysRollbackArmed 11
NAME = ; DESC = System TRAP message: Indication of System \ Rollback Feature armed, resulting from User \ committing/activating Code/Config Bank for \ next reset.\ Severity Level: INFORMATIVE.; HELP = This is an indication of user committing a new \ code bank/Config Bank after the access device \ is reset the next time around. If this \ condition is not needed, consult your System \ Admin. or Field personnel.;
TRAP-TYPE    

mcmSysRollbackDisarmed 12
NAME = ; DESC = System TRAP message: Indication of System \ Rollback Feature confirmed for this session.\ Severity Level: INFORMATIVE.; HELP = This is a condition of disarming previously \ committed Code Bank/config Bank that was going \ to occur after a reset. If it is not desirable, \ reverse the condition., ;
TRAP-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor