MICOM-RFC1604-MIB

File: MICOM-RFC1604-MIB.mib (43887 bytes)

Imported modules

RFC1155-SMI RFC-1212 MICOM-OSCAR-MIB

Imported symbols

Counter OBJECT-TYPE micom-oscar

Defined Types

McmFrLportEntry  
SEQUENCE    
  mcmFrLportIfIndex INTEGER
  mcmFrLportNumPlan INTEGER
  mcmFrLportType INTEGER
  mcmFrLportAddrDLCILen INTEGER
  mcmFrLportVCSigProtocol INTEGER

McmFrMgtVCSigEntry  
SEQUENCE    
  mcmFrMgtVCSigIfIndex INTEGER
  mcmFrMgtVCSigProced INTEGER
  mcmFrMgtVCSigNetN392 INTEGER
  mcmFrMgtVCSigNetN393 INTEGER
  mcmFrMgtVCSigNetT392 INTEGER
  mcmFrMgtVCSigNetLinkRelErrors Counter
  mcmFrMgtVCSigNetProtErrors Counter
  mcmFrMgtVCSigNetChanInactive Counter

McmFrPVCEndptEntry  
SEQUENCE    
  mcmFrPVCEndptIfIndex INTEGER
  mcmFrPVCEndptDLCIIndex INTEGER
  mcmFrPVCEndptInMaxFrameSize INTEGER
  mcmFrPVCEndptInBc INTEGER
  mcmFrPVCEndptInBe INTEGER
  mcmFrPVCEndptInCIR INTEGER
  mcmFrPVCEndptOutMaxFrameSize INTEGER
  mcmFrPVCEndptOutBc INTEGER
  mcmFrPVCEndptOutBe INTEGER
  mcmFrPVCEndptOutCIR INTEGER
  mcmFrPVCEndptInFrames Counter
  mcmFrPVCEndptOutFrames Counter
  mcmFrPVCEndptInDEFrames Counter
  mcmFrPVCEndptInExcessFrames Counter
  mcmFrPVCEndptOutExcessFrames Counter
  mcmFrPVCEndptInDiscards Counter
  mcmFrPVCEndptInOctets Counter
  mcmFrPVCEndptOutOctets Counter

NvmFrLportEntry  
SEQUENCE    
  nvmFrLportIfIndex INTEGER
  nvmFrLportNumPlan INTEGER
  nvmFrLportType INTEGER
  nvmFrLportAddrDLCILen INTEGER
  nvmFrLportVCSigProtocol INTEGER

NvmFrMgtVCSigEntry  
SEQUENCE    
  nvmFrMgtVCSigIfIndex INTEGER
  nvmFrMgtVCSigProced INTEGER
  nvmFrMgtVCSigNetN392 INTEGER
  nvmFrMgtVCSigNetN393 INTEGER
  nvmFrMgtVCSigNetT392 INTEGER

NvmFrPVCEndptEntry  
SEQUENCE    
  nvmFrPVCEndptIfIndex INTEGER
  nvmFrPVCEndptDLCIIndex INTEGER
  nvmFrPVCEndptInMaxFrameSize INTEGER
  nvmFrPVCEndptInBc INTEGER
  nvmFrPVCEndptInBe INTEGER
  nvmFrPVCEndptInCIR INTEGER
  nvmFrPVCEndptOutMaxFrameSize INTEGER
  nvmFrPVCEndptOutBc INTEGER
  nvmFrPVCEndptOutBe INTEGER
  nvmFrPVCEndptOutCIR INTEGER

McmFrMgtVCSigCntrEntry  
SEQUENCE    
  mcmFrMgtVCSigCntrIfIndex INTEGER
  mcmFrMgtVCSigCntrAction INTEGER

McmFrPVCEndptCntrEntry  
SEQUENCE    
  mcmFrPVCEndptCntrIfIndex INTEGER
  mcmFrPVCEndptCntrDLCIIndex INTEGER
  mcmFrPVCEndptCntrAction INTEGER

Defined Values

micom-rfc1604 1.3.6.1.4.1.335.1.4.8
OBJECT IDENTIFIER    

rfc1604-configuration 1.3.6.1.4.1.335.1.4.8.1
OBJECT IDENTIFIER    

rfc1604-control 1.3.6.1.4.1.335.1.4.8.2
OBJECT IDENTIFIER    

mcmFrLportTable 1.3.6.1.4.1.335.1.4.8.1.1
NAME = ; DESC = The Frame Relay Logical Port Information \ table (Operational).; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    McmFrLportEntry

mcmFrLportEntry 1.3.6.1.4.1.335.1.4.8.1.1.1
NAME = ; DESC = An entry in the Frame Relay Logical \ Port Information table (Operational).; HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  McmFrLportEntry  

mcmFrLportIfIndex 1.3.6.1.4.1.335.1.4.8.1.1.1.1
NAME = ; DESC = The ifIndex of the local DCE interface. \ (Analogous to the ifIndex pointer in the \ MIB II Interfaces Group, but specific to \ the FR Logical Port info table.) (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

mcmFrLportNumPlan 1.3.6.1.4.1.335.1.4.8.1.1.1.2
NAME = ; DESC = The value of this object identifies \ the network address numbering plan \ for this UNI logical port. \ (Operational); HELP = The network address is the object ifPhysAddress. \ The value 'none' implies that there is \ no ifPhysAddress (the SNMP proxy-agent \ will return an octet string of zero \ length for ifPhysAddress). The value \ 'other' means that an address has been \ assigned to this interface, but the \ numbering plan is not enumerated here. ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), e164(2), x121(3), none(4)  

mcmFrLportType 1.3.6.1.4.1.335.1.4.8.1.1.1.3
NAME = ; DESC = The value of this object identifies \ the type of network interface for this \ logical port. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER uni(1), nni(2)  

mcmFrLportAddrDLCILen 1.3.6.1.4.1.335.1.4.8.1.1.1.4
NAME = ; DESC = The value of this object identifies \ the Q.922 Address field length and \ DLCI length for this UNI logical \ port. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER twoOctets10Bits(1), threeOctets10Bits(2), threeOctets16Bits(3), fourOctets17Bits(4), fourOctets23Bits(5)  

mcmFrLportVCSigProtocol 1.3.6.1.4.1.335.1.4.8.1.1.1.5
NAME = ; DESC = The value of this object identifies \ the Local In-Channel Signaling Protocol \ that is used for this frame relay UNI \ logical port. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), lmi(2), ccittQ933A(5), ansiT1617D-1994(6)  

mcmFrMgtVCSigTable 1.3.6.1.4.1.335.1.4.8.1.2
NAME = ; DESC = The Frame Relay Management VC \ Signaling Parameters and Errors table. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    McmFrMgtVCSigEntry

mcmFrMgtVCSigEntry 1.3.6.1.4.1.335.1.4.8.1.2.1
NAME = ; DESC = An entry in the Frame Relay Management \ VC Signaling Parameters and Errors table. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  McmFrMgtVCSigEntry  

mcmFrMgtVCSigIfIndex 1.3.6.1.4.1.335.1.4.8.1.2.1.1
NAME = ; DESC = The ifIndex of the local DCE interface. \ (Operational); HELP = (Analogous to the ifIndex pointer in the \ MIB II Interfaces Group but specific to \ the FR Mgmt VC Sig table.); CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

mcmFrMgtVCSigProced 1.3.6.1.4.1.335.1.4.8.1.2.1.2
NAME = ; DESC = The value of this object identifies \ the Local In-Channel Signaling Procedure \ that is used for this UNI logical \ port. (Operational); HELP = The UNI logical port can \ be performing only user-to-network \ network-side procedures.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER u2nnet(1), bidirect(2)  

mcmFrMgtVCSigNetN392 1.3.6.1.4.1.335.1.4.8.1.2.1.3
NAME = ; DESC = The value of this object identifies \ the Network-side N392 error threshold \ value for this UNI logical port (nN2 for LMI). \ (Operational); HELP = If the logical port is not performing \ network-side procedures, then this value is \ equal to noSuchName. This object \ applies to Q.933 Annex A, T1.617 \ Annex D, and LMI.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

mcmFrMgtVCSigNetN393 1.3.6.1.4.1.335.1.4.8.1.2.1.4
NAME = ; DESC = The value of this object identifies \ the Network-side N393 monitored events \ count value for this UNI logical port \ (nN3 for LMI). (Operational); HELP = If the logical port is not performing \ network-side procedures, then this value is equal \ to noSuchName. This object \ applies to Q.933 Annex A, T1.617 \ Annex D, and LMI.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

mcmFrMgtVCSigNetT392 1.3.6.1.4.1.335.1.4.8.1.2.1.5
NAME = ; DESC = The value of this object identifies \ the Network-side T392 polling verification \ timer value for this UNI logical port \ (nT2 for LMI). (Operational); HELP = This value is in seconds. \ If the logical port is not performing\ network-side procedures, \ then this value is equal to noSuchName. \ This object applies to Q.933 Annex A, \ T1.617 Annex D, and LMI.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 5..30  

mcmFrMgtVCSigNetLinkRelErrors 1.3.6.1.4.1.335.1.4.8.1.2.1.6
NAME = ; DESC = The number of network-side local in-channel \ signaling link reliability errors. \ (Operational); HELP = Marks non-receipt of Status/Status Enquiry \ messages or invalid sequence numbers \ in a Link Integrity Verification Information \ Element for this UNI logical port. \ If the logical port is not performing \ network-side procedures, then this value is equal \ to noSuchName. Note: no Configuration counterpart \ for this object.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mcmFrMgtVCSigNetProtErrors 1.3.6.1.4.1.335.1.4.8.1.2.1.7
NAME = ; DESC = The number of network-side local in-channel \ signaling protocol errors. (Operational); HELP = Types include protocol discriminator, message type, call reference, \ and mandatory information element errors) \ for this UNI logical port. If \ the logical port is not performing \ network-side procedures, then this value is equal \ to noSuchName. \ Note: no Configuration counterpart for this object.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mcmFrMgtVCSigNetChanInactive 1.3.6.1.4.1.335.1.4.8.1.2.1.8
NAME = ; DESC = The number of times the network-side channel \ was declared inactive.; (Operational) \ ; HELP = If the logical port is not performing \ network-side procedures, then this value \ is equal to noSuchName. Note: no Configuration \ counterpart for this object.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mcmFrPVCEndptTable 1.3.6.1.4.1.335.1.4.8.1.3
NAME = ; DESC = The Frame Relay PVC End-Point table. \ (Operational); HELP = This table contains the \ traffic parameters and statistics for \ a PVC end-point.; CAPABILITIES = NET_CFG, VPN_CFG;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    McmFrPVCEndptEntry

mcmFrPVCEndptEntry 1.3.6.1.4.1.335.1.4.8.1.3.1
NAME = ; DESC = An entry in the Frame Relay PVC End-point \ table. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  McmFrPVCEndptEntry  

mcmFrPVCEndptIfIndex 1.3.6.1.4.1.335.1.4.8.1.3.1.1
NAME = ; DESC = The ifIndex of the local DCE interface. \ (Operational); HELP = (Analogous to the ifIndex pointer in the \ MIB II Interfaces Group but specific to \ the PVC end-point table.); CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

mcmFrPVCEndptDLCIIndex 1.3.6.1.4.1.335.1.4.8.1.3.1.2
NAME = ; DESC = The value of this object is equal to the \ DLCI value for this PVC end-point. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 16..991  

mcmFrPVCEndptInMaxFrameSize 1.3.6.1.4.1.335.1.4.8.1.3.1.3
NAME = ; DESC = The largest frame relay information field \ in octets for this PVC end-point data sent \ into the network. (Operational); HELP = The value must be \ less than or equal to the corresponding \ ifMtu (mcmFrPhyPortMtuSize) for this \ Frame Relay UNI logical port.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4096  

mcmFrPVCEndptInBc 1.3.6.1.4.1.335.1.4.8.1.3.1.4
NAME = ; DESC = The committed burst size (Bc) in bits \ for this PVC end-point data sent into \ frame relay network.(Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2560000  

mcmFrPVCEndptInBe 1.3.6.1.4.1.335.1.4.8.1.3.1.5
NAME = ; DESC = The committed excess size (Be) in bits \ for this PVC end-point data sent into \ frame relay network. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2560000  

mcmFrPVCEndptInCIR 1.3.6.1.4.1.335.1.4.8.1.3.1.6
NAME = ; DESC = The committed information rate (CIR) in bits/sec \ for this PVC end-point data sent into \ frame relay network.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

mcmFrPVCEndptOutMaxFrameSize 1.3.6.1.4.1.335.1.4.8.1.3.1.7
NAME = ; DESC = The largest frame relay information field \ in octets for this PVC end-point data received \ from the network. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4096  

mcmFrPVCEndptOutBc 1.3.6.1.4.1.335.1.4.8.1.3.1.8
NAME = ; DESC = (Operational); HELP = The committed burst size (Bc) in bits \ for this PVC end-point data received from \ frame relay network.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2560000  

mcmFrPVCEndptOutBe 1.3.6.1.4.1.335.1.4.8.1.3.1.9
NAME = ; DESC = The committed excess size (Be) in bits \ for this PVC end-point data received from \ frame relay network. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2560000  

mcmFrPVCEndptOutCIR 1.3.6.1.4.1.335.1.4.8.1.3.1.10
NAME = ; DESC =The committed information rate (CIR) in bits/sec \ for this PVC end-point data received from \ frame relay network.(Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

mcmFrPVCEndptInFrames 1.3.6.1.4.1.335.1.4.8.1.3.1.11
NAME = ; DESC = The number of frames received by the \ network (ingress) for this PVC end-point. \ (Operational); HELP = This includes any frames discarded \ by the network due to submitting more \ than Bc + Be data or due to any network \ congestion recovery procedures. \ Note: no Configuration counterpart for this object.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mcmFrPVCEndptOutFrames 1.3.6.1.4.1.335.1.4.8.1.3.1.12
NAME = ; DESC = The number of frames sent by the network \ (egress) regardless of whether they \ are Bc or Be frames for this PVC end-point. (Operational) \ ; HELP = Note: no Configuration counterpart for this object.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mcmFrPVCEndptInDEFrames 1.3.6.1.4.1.335.1.4.8.1.3.1.13
NAME = ; DESC = The number of frames received by the \ network (ingress) with the DE bit set \ to (1) for this PVC end-point. (Operational); HELP = Note: no Configuration counterpart for this object.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mcmFrPVCEndptInExcessFrames 1.3.6.1.4.1.335.1.4.8.1.3.1.14
NAME = ; DESC = The number of frames received by the \ network (ingress) for this PVC end-point \ which were treated as excess traffic. \ (Operational); HELP = Frames which are sent to the network \ with DE set to zero are treated as \ excess when more than Bc bits are submitted \ to the network during the Committed \ Information Rate Measurement Interval \ (Tc). Excess traffic may or may not \ be discarded at the ingress if more \ than Bc + Be bits are submitted to \ the network during Tc. Traffic discarded \ at the ingress is not recorded in \ mcmFrPVCEndptInExcessFrames. \ Frames which are sent to the network \ with DE set to one are also treated \ as excess traffic. \ Note: no Configuration counterpart for this object.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mcmFrPVCEndptOutExcessFrames 1.3.6.1.4.1.335.1.4.8.1.3.1.15
NAME = ; DESC = The number of frames sent by the network \ (egress) for this PVC end-point which \ were treated as excess traffic. (The \ DE bit may be set to one.) (Operational); HELP = Note: no Configuration counterpart for this object.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mcmFrPVCEndptInDiscards 1.3.6.1.4.1.335.1.4.8.1.3.1.16
NAME = ; DESC = The number of frames received by the \ the network (ingress) that were discarded \ due to traffic enforcement for this \ PVC end-point. (Operational); HELP = Note: no Configuration counterpart for this object.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mcmFrPVCEndptInOctets 1.3.6.1.4.1.335.1.4.8.1.3.1.17
NAME = ; DESC = The number of octets received by the \ network (ingress) for this PVC end-point. \ (Operational); HELP = This counter should only count octets \ from the beginning of the frame relay \ header field to the end of user data. \ If the network supporting Frame Relay \ cannot count octets, then this count \ should be an approximation. \ Note: no Configuration counterpart for this object.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mcmFrPVCEndptOutOctets 1.3.6.1.4.1.335.1.4.8.1.3.1.18
NAME = ; DESC = The number of octets sent by the network \ (egress) for this PVC end-point. (Operational); ; HELP = This counter should only count octets from \ the beginning of the frame relay header \ field to the end of user data. If \ the network supporting Frame Relay \ can not count octets, then this count \ should be an approximation. Note: no Configuration counterpart for this object.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvmFrLportTable 1.3.6.1.4.1.335.1.4.8.1.4
NAME = ; DESC = The Frame Relay Logical Port Information \ table (Configuration).; HELP = NET_CFG, VPN_CFG; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvmFrLportEntry

nvmFrLportEntry 1.3.6.1.4.1.335.1.4.8.1.4.1
NAME = ; DESC = An entry in the Frame Relay Logical \ Port Information table (Configuration).; HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvmFrLportEntry  

nvmFrLportIfIndex 1.3.6.1.4.1.335.1.4.8.1.4.1.1
NAME = ; DESC = The ifIndex of the local DCE interface. \ (Analogous to the ifIndex pointer in the \ MIB II Interfaces Group but specific to \ the FR Logical Port info table..) (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

nvmFrLportNumPlan 1.3.6.1.4.1.335.1.4.8.1.4.1.2
NAME = ; DESC = The value of this object identifies \ the network address numbering plan \ for this UNI logical port. \ (Configuration); HELP = The network address is the object ifPhysAddress. \ The value 'none' implies that there is \ no ifPhysAddress (the SNMP proxy-agent \ will return an octet string of zero \ length for ifPhysAddress). The value \ 'other' means that an address has been \ assigned to this interface, but the \ numbering plan is not enumerated here. \ (For Release 1.1, only none(4) will be supported. \ This object has temporarily been assigned read-only \ access. Read-write access will be assigned when \ other enumeration values are supported.) ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), e164(2), x121(3), none(4)  

nvmFrLportType 1.3.6.1.4.1.335.1.4.8.1.4.1.3
NAME = ; DESC = The value of this object identifies \ the type of network interface for this \ logical port. (Always uni(1) for Release 1.1). \ (Configuration); HELP = This object has temporarily been assigned read-only \ access. Read-write access will be assigned when \ other enumeration values are supported. ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER uni(1), nni(2)  

nvmFrLportAddrDLCILen 1.3.6.1.4.1.335.1.4.8.1.4.1.4
NAME = ; DESC = The value of this object identifies \ the Q.922 Address field length and \ DLCI length for this UNI logical port.\ (Always twoOctets10Bits(1) for Release 1.1). \ (Configuration); HELP = This object has temporarily been assigned read-only \ access. Read-write access will be assigned when \ other enumeration values are supported.); CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER twoOctets10Bits(1), threeOctets10Bits(2), threeOctets16Bits(3), fourOctets17Bits(4), fourOctets23Bits(5)  

nvmFrLportVCSigProtocol 1.3.6.1.4.1.335.1.4.8.1.4.1.5
NAME = ; DESC = The value of this object identifies \ the Local In-Channel Signaling Protocol \ that is used for this frame relay UNI \ logical port. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), lmi(2), ccittQ933A(5), ansiT1617D-1994(6)  

nvmFrMgtVCSigTable 1.3.6.1.4.1.335.1.4.8.1.5
NAME = ; DESC = The Frame Relay Management VC \ Signaling Parameters and Errors table. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvmFrMgtVCSigEntry

nvmFrMgtVCSigEntry 1.3.6.1.4.1.335.1.4.8.1.5.1
NAME = ; DESC = An entry in the Frame Relay Management \ VC Signaling Parameters and Errors table. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvmFrMgtVCSigEntry  

nvmFrMgtVCSigIfIndex 1.3.6.1.4.1.335.1.4.8.1.5.1.1
NAME = ; DESC = The ifIndex of the local DCE interface. \ (Analogous to the ifIndex pointer in the \ MIB II Interfaces Group but specific to \ the FR Mgmt VC Sig table.) (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

nvmFrMgtVCSigProced 1.3.6.1.4.1.335.1.4.8.1.5.1.2
NAME = ; DESC = The value of this object identifies \ the Local In-Channel Signaling Procedure \ that is used for this UNI logical \ port. (Configuration); HELP = The UNI logical port can \ be performing only user-to-network \ network-side procedures. \ Always u2nnet(1) for Release 1.1. \ This object has temporarily been assigned read-only \ access. Read-write access will be assigned when \ other enumeration values are supported. ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER u2nnet(1), bidirect(2)  

nvmFrMgtVCSigNetN392 1.3.6.1.4.1.335.1.4.8.1.5.1.3
NAME = ; DESC = The value of this object identifies \ the Network-side N392 error threshold \ value for this UNI logical port (nN2 for LMI). \ (Configuration); HELP = If the logical port is not performing \ network-side procedures, then this value is \ equal to noSuchName. This object \ applies to Q.933 Annex A, T1.617 \ Annex D, and LMI.; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

nvmFrMgtVCSigNetN393 1.3.6.1.4.1.335.1.4.8.1.5.1.4
NAME = ; DESC = The value of this object identifies \ the Network-side N393 monitored events \ count value for this UNI logical port \ (nN3 for LMI). (Configuration); HELP = If the logical port is not performing \ network-side procedures, then this value is equal \ to noSuchName. This object applies to Q.933 \ Annex A, T1.617 Annex D, and LMI. \ (Always set to value of N392 for Release 1.1. \ This object has temporarily been assigned read-only \ access. Read-write access will be assigned when \ other values are supported.) ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

nvmFrMgtVCSigNetT392 1.3.6.1.4.1.335.1.4.8.1.5.1.5
NAME = ; DESC = The value of this object identifies \ the Network-side T392 polling verification \ timer value for this UNI logical port \ (nT2 for LMI). (Configuration); HELP = This value is in seconds. \ If the logical port is not performing\ network-side procedures, \ then this value is equal to noSuchName. \ This object applies to Q.933 Annex A, \ T1.617 Annex D, and LMI; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

nvmFrPVCEndptTable 1.3.6.1.4.1.335.1.4.8.1.6
NAME = ; DESC = The Frame Relay PVC End-Point table. \ This table is used to model a PVC \ end-point. (Configuration); HELP = This table contains the \ traffic parameters and statistics for \ a PVC end-point.; CAPABILITIES = NET_CFG, VPN_CFG;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvmFrPVCEndptEntry

nvmFrPVCEndptEntry 1.3.6.1.4.1.335.1.4.8.1.6.1
NAME = ; DESC = An entry in the Frame Relay PVC End-point \ table. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvmFrPVCEndptEntry  

nvmFrPVCEndptIfIndex 1.3.6.1.4.1.335.1.4.8.1.6.1.1
NAME = ; DESC = The ifIndex of the local DCE interface. \ (Configuration); HELP = (Analogous to the ifIndex pointer in the \ MIB II Interfaces Group but specific to \ the PVC end-point table.); CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

nvmFrPVCEndptDLCIIndex 1.3.6.1.4.1.335.1.4.8.1.6.1.2
NAME = ; DESC = The value of this object is equal to the \ DLCI value for this PVC end-point. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 16..991  

nvmFrPVCEndptInMaxFrameSize 1.3.6.1.4.1.335.1.4.8.1.6.1.3
NAME = ; DESC = The largest frame relay information field \ in octets for this PVC end-point data sent \ into the network. (Configuration); HELP = The value must be \ less than or equal to the corresponding \ ifMtu (nvmFrPhyPortMtuSize) for this \ Frame Relay UNI logical port.; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4096  

nvmFrPVCEndptInBc 1.3.6.1.4.1.335.1.4.8.1.6.1.4
NAME = ; DESC = The committed burst size (Bc) in bits \ for this PVC end-point data sent into \ frame relay network. (Configuration); HELP = This object has temporarily \ been assigned read-only access. Read-write \ access may be assigned in future \ releases.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2560000  

nvmFrPVCEndptInBe 1.3.6.1.4.1.335.1.4.8.1.6.1.5
NAME = ; DESC = The committed excess size (Be) in bits \ for this PVC end-point data sent into \ frame relay network. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2560000  

nvmFrPVCEndptInCIR 1.3.6.1.4.1.335.1.4.8.1.6.1.6
NAME = ; DESC = The committed information rate (CIR) in bits/sec \ for this PVC end-point data sent into \ frame relay network.(Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2560000  

nvmFrPVCEndptOutMaxFrameSize 1.3.6.1.4.1.335.1.4.8.1.6.1.7
NAME = ; DESC = The largest frame relay information field \ in octets for this PVC end-point data received \ from the network. (Configuration); HELP = The value must be \ less than or equal to the corresponding \ ifMtu (nvmFrPhyPortMtuSize) for this \ Frame Relay UNI logical port.; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4096  

nvmFrPVCEndptOutBc 1.3.6.1.4.1.335.1.4.8.1.6.1.8
NAME = ; DESC = The committed burst size (Bc) in bits \ for this PVC end-point data received from \ frame relay network. (Configuration); HELP = This object has temporarily \ been assigned read-only access. Read-write \ access may be assigned in future \ releases.; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2560000  

nvmFrPVCEndptOutBe 1.3.6.1.4.1.335.1.4.8.1.6.1.9
NAME = ; DESC = The committed excess size (Be) in bits \ for this PVC end-point data received from \ frame relay network. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2560000  

nvmFrPVCEndptOutCIR 1.3.6.1.4.1.335.1.4.8.1.6.1.10
NAME = ; DESC = The committed information rate (CIR) in bits/sec \ for this PVC end-point data received from \ frame relay network. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2560000  

mcmFrMgtVCSigCntrTable 1.3.6.1.4.1.335.1.4.8.2.1
NAME = ; DESC = The Frame Relay Management VC Signaling \ Parameters counter reset table.; HELP = ; CAPABILITIES = NET_OPER, VPN_OPER;
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    McmFrMgtVCSigCntrEntry

mcmFrMgtVCSigCntrEntry 1.3.6.1.4.1.335.1.4.8.2.1.1
NAME = ; DESC = An entry in the Frame Relay Management VC \ Signaling Parameters counter reset table.; HELP = ; CAPABILITIES = ;
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  McmFrMgtVCSigCntrEntry  

mcmFrMgtVCSigCntrIfIndex 1.3.6.1.4.1.335.1.4.8.2.1.1.1
NAME = ; DESC = The ifIndex of the FR Management VC Signaling \ Parameters table. This index specifies \ the particular row of counter objects to \ be reset.; HELP = ; CAPABILITIES = ;
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

mcmFrMgtVCSigCntrAction 1.3.6.1.4.1.335.1.4.8.2.1.1.2
NAME = ; DESC = Setting this object to reset(1) will \ zero the values of a specific row of \ counters in the FR Management VC \ Signaling Parameters table.; HELP = When set to reset(1), a row containing \ the following counter objects are reset: \ mcmFrMgtVCSigNetLinkRelErrors \ mcmFrMgtVCSigNetProtErrors \ mcmFrMgtVCSigNetChanInactive; CAPABILITIES = ;
Status: obsolete Access: write-only
OBJECT-TYPE    
  INTEGER reset(1)  

mcmFrPVCEndptCntrTable 1.3.6.1.4.1.335.1.4.8.2.2
NAME = ; DESC = The Frame Relay PVC End-Point Group \ counter reset table.; HELP = ; CAPABILITIES = NET_OPER, VPN_OPER;
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    McmFrPVCEndptCntrEntry

mcmFrPVCEndptCntrEntry 1.3.6.1.4.1.335.1.4.8.2.2.1
NAME = ; DESC = An entry in the Frame Relay PVC End-Point \ Group counter reset table.; HELP = ; CAPABILITIES = ;
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  McmFrPVCEndptCntrEntry  

mcmFrPVCEndptCntrIfIndex 1.3.6.1.4.1.335.1.4.8.2.2.1.1
NAME = ; DESC = The ifIndex of the FR PVC End-Point \ table. This index (in conjunction with \ the DLCI index) specifies the particular \ row of counter objects to be reset.; HELP = ; CAPABILITIES = ;
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

mcmFrPVCEndptCntrDLCIIndex 1.3.6.1.4.1.335.1.4.8.2.2.1.2
NAME = ; DESC = The DLCI Index of the FR PVC End-Point \ table. This index (in conjunction with \ the ifIndex) specifies the particular \ row of counter objects to be reset.; HELP = ; CAPABILITIES = ;
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

mcmFrPVCEndptCntrAction 1.3.6.1.4.1.335.1.4.8.2.2.1.3
NAME = ; DESC = Setting this object to reset(1) will \ zero the values of a specific row of \ counters in the FR PVC End-Point table; HELP = When set to reset(1), a row containing \ the following counter objects are reset: \ mcmFrPVCEndptInFrames \ mcmFrPVCEndptOutFrames \ mcmFrPVCEndptInDEFrames \ mcmFrPVCEndptInExcessFrames \ mcmFrPVCEndptOutExcessFrames \ mcmFrPVCEndptInDiscards \ mcmFrPVCEndptInOctets \ mcmFrPVCEndptOutOctets; CAPABILITIES = ;
Status: obsolete Access: write-only
OBJECT-TYPE    
  INTEGER reset(1)