MICOM-56KCSU-MIB

File: MICOM-56KCSU-MIB.mib (15263 bytes)

Imported modules

RFC-1212 MICOM-OSCAR-MIB

Imported symbols

OBJECT-TYPE micom-oscar

Defined Values

micom-56kcsu 1.3.6.1.4.1.335.1.4.28
OBJECT IDENTIFIER    

csu56k-configuration 1.3.6.1.4.1.335.1.4.28.1
OBJECT IDENTIFIER    

csu56k-status 1.3.6.1.4.1.335.1.4.28.2
OBJECT IDENTIFIER    

mcm56kCsuCfgGroup 1.3.6.1.4.1.335.1.4.28.1.1
OBJECT IDENTIFIER    

mcm56kCsuCfgOperatingMode 1.3.6.1.4.1.335.1.4.28.1.1.1
NAME = ; DESC = The value of this object selects the 56K CSU \ operating mode. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER dds-pri-4Wire-56k(1), dds-sc-WithSecondaryChannel-72k(2), cc-64k-ClearChannel-64k(3), dds-pri-2Wire-56k(4)  

mcm56kCsuCfgClockingSource 1.3.6.1.4.1.335.1.4.28.1.1.2
NAME = ; DESC = The value of this object selects the 56K CSU \ clocking source. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER externalClock(1), internalClock(2)  

mcm56kCsuCfgTxOutOfFrame 1.3.6.1.4.1.335.1.4.28.1.1.3
NAME = ; DESC = This object selects transmission of the 56K CSU \ Out Of Frame sequence for DDS-PRI mode, or \ transmission of Multiplexer Out Of Sync \ sequence for DDS-SC mode. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER normalTransmitCondition(1), transmitOutOfFrame(2)  

mcm56kCsuCfgTxOutOfService 1.3.6.1.4.1.335.1.4.28.1.1.4
NAME = ; DESC = This object selects transmission of the 56K CSU \ Out Of Service sequence for DDS-PRI mode, or \ transmission of Abnormal Station Code \ sequence for DDS-SC mode. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER normalTransmitCondition(1), transmitOutOfService(2)  

mcm56kCsuCfgTxControlModeIdle 1.3.6.1.4.1.335.1.4.28.1.1.5
NAME = ; DESC = This object selects transmission of the 56K CSU \ Control Mode Idle sequence. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER normalTransmitCondition(1), transmitControlModeIdle(2)  

mcm56kCsuCfgZeroSuppressDisable 1.3.6.1.4.1.335.1.4.28.1.1.6
NAME = ; DESC = This object selects the 56K CSU disable \ transmit Zero Suppression for DDS-PRI mode, \ or transmission of all zeros for DDS-SC mode. \ (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER normalTransmitCondition(1), zeroSuppressionDisable(2)  

mcm56kCsuCfgTxIdle 1.3.6.1.4.1.335.1.4.28.1.1.7
NAME = ; DESC = This object selects transmission of the 56K CSU \ All Marks (or 1s) of the Data Mode Idle sequence \ for all the modes. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER normalTransmitCondition(1), transmitIdle(2)  

mcm56kCsuCfgCSULoopback 1.3.6.1.4.1.335.1.4.28.1.1.8
NAME = ; DESC = This object selects the 56K CSU to force the CSU \ to be in a loopback mode. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER normalReceiveCondition(1), forceCSUtoLoopback(2)  

mcm56kCsuCfgFilterForceEnable 1.3.6.1.4.1.335.1.4.28.1.1.9
NAME = ; DESC = This object selects the 56K CSU to have \ filter forcing enabled or not. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER normalReceiveCondition(1), filterForceEnable(2)  

mcm56kCsuCfgFilterForcingCntl 1.3.6.1.4.1.335.1.4.28.1.1.10
NAME = ; DESC = This object selects the 56K CSU filter \ gain if filter force is enabled. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER filterGain-90db(1), filterGain-84db(2), filterGain-78db(3), filterGain-72db(4), filterGain-66db(5), filterGain-60db(6), filterGain-54db(7), filterGain-48db(8), filterGain-42db(9), filterGain-36db(10), filterGain-30db(11), filterGain-24db(12), filterGain-18db(13), filterGain-12db(14), filterGain-6db(15), filterGain-0db(16)  

nvm56kCsuCfgGroup 1.3.6.1.4.1.335.1.4.28.1.2
OBJECT IDENTIFIER    

nvm56kCsuCfgOperatingMode 1.3.6.1.4.1.335.1.4.28.1.2.1
NAME = ; DESC = The value of this object selects the 56K CSU \ operating mode. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER dds-pri-4Wire-56k(1), dds-sc-WithSecondaryChannel-72k(2), cc-64k-ClearChannel-64k(3), dds-pri-2Wire-56k(4)  

nvm56kCsuCfgClockingSource 1.3.6.1.4.1.335.1.4.28.1.2.2
NAME = ; DESC = The value of this object selects the 56K CSU \ clocking source. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER externalClock(1), internalClock(2)  

nvm56kCsuCfgTxOutOfFrame 1.3.6.1.4.1.335.1.4.28.1.2.3
NAME = ; DESC = This object selects transmission of the 56K CSU \ Out Of Frame sequence for DDS-PRI mode, or \ transmission of Multiplexer Out Of Sync \ sequence for DDS-SC mode. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER normalTransmitCondition(1), transmitOutOfFrame(2)  

nvm56kCsuCfgTxOutOfService 1.3.6.1.4.1.335.1.4.28.1.2.4
NAME = ; DESC = This object selects transmission of the 56K CSU \ Out Of Service sequence for DDS-PRI mode, or \ transmission of Abnormal Station Code \ sequence for DDS-SC mode. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER normalTransmitCondition(1), transmitOutOfService(2)  

nvm56kCsuCfgTxControlModeIdle 1.3.6.1.4.1.335.1.4.28.1.2.5
NAME = ; DESC = This object selects transmission of the 56K CSU \ Control Mode Idle sequence. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER normalTransmitCondition(1), transmitControlModeIdle(2)  

nvm56kCsuCfgZeroSuppressDisable 1.3.6.1.4.1.335.1.4.28.1.2.6
NAME = ; DESC = This object selects the 56K CSU disable \ transmit Zero Suppression for DDS-PRI mode, \ or transmission of all zeros for DDS-SC mode. \ (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER normalTransmitCondition(1), zeroSuppressionDisable(2)  

nvm56kCsuCfgTxIdle 1.3.6.1.4.1.335.1.4.28.1.2.7
NAME = ; DESC = This object selects transmission of the 56K CSU \ All Marks (or 1s) of the Data Mode Idle sequence \ for all the modes. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER normalTransmitCondition(1), transmitIdle(2)  

nvm56kCsuCfgCSULoopback 1.3.6.1.4.1.335.1.4.28.1.2.8
NAME = ; DESC = This object selects the 56K CSU to force the CSU \ to be in a loopback mode. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER normalReceiveCondition(1), forceCSUtoLoopback(2)  

nvm56kCsuCfgFilterForceEnable 1.3.6.1.4.1.335.1.4.28.1.2.9
NAME = ; DESC = This object selects the 56K CSU to have \ filter forcing enabled or not. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER normalReceiveCondition(1), filterForceEnable(2)  

nvm56kCsuCfgFilterForcingCntl 1.3.6.1.4.1.335.1.4.28.1.2.10
NAME = ; DESC = This object selects the 56K CSU filter \ gain if filter force is enabled. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  INTEGER filterGain-90db(1), filterGain-84db(2), filterGain-78db(3), filterGain-72db(4), filterGain-66db(5), filterGain-60db(6), filterGain-54db(7), filterGain-48db(8), filterGain-42db(9), filterGain-36db(10), filterGain-30db(11), filterGain-24db(12), filterGain-18db(13), filterGain-12db(14), filterGain-6db(15), filterGain-0db(16)  

mcm56KCsuStatusGroup 1.3.6.1.4.1.335.1.4.28.2.1
OBJECT IDENTIFIER    

mcm56KCsuStatusLineStatus 1.3.6.1.4.1.335.1.4.28.2.1.1
NAME = ; DESC = The value of this object indicates the 56K \ CSU line status.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ;
OBJECT-TYPE    
  INTEGER operational(1), linkDown(2), testMode(3)  

mcm56KCsuStatusRxLossOfSignal 1.3.6.1.4.1.335.1.4.28.2.1.2
NAME = ; DESC = The value of this object indicates if the 56K \ CSU receiver has lost signal.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcm56KCsuStatusFAWSync 1.3.6.1.4.1.335.1.4.28.2.1.3
NAME = ; DESC = The value of this object indicates the 56K \ CSU DDS FAW Sync in DDS-SC or CC-64K.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcm56KCsuStatusLoopPresent 1.3.6.1.4.1.335.1.4.28.2.1.4
NAME = ; DESC = The value of this object indicates if the 56K \ CSU loop is currently present.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcm56KCsuStatusInsertLossLineLength 1.3.6.1.4.1.335.1.4.28.2.1.5
NAME = ; DESC = The value of this object indicates the 56K \ CSU receiver line length.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ;
OBJECT-TYPE    
  INTEGER  

mcm56KCsuStatusRxSignalMag 1.3.6.1.4.1.335.1.4.28.2.1.6
NAME = ; DESC = The value of this object indicates the 56K \ CSU receive signal magnitude.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ;
OBJECT-TYPE    
  INTEGER  

mcm56KCsuStatusInvalidBPVcount 1.3.6.1.4.1.335.1.4.28.2.1.7
NAME = ; DESC = The value of this object indicates the 56K \ CSU invalid Bipolar Violation (BPV) count.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ;
OBJECT-TYPE    
  INTEGER