MEDIAHAWK-MIB

Imported modules

RFC1155-SMI	RFC-1212	RFC1213-MIB
SNMPv2-TC	RFC-1215

Imported symbols

enterprises	NetworkAddress	IpAddress
Counter	Gauge	TimeTicks
OBJECT-TYPE	DisplayString	PhysAddress
DateAndTime	TRAP-TYPE

Defined Types

MhvsVPVideoEntry
SEQUENCE
	mhvsVPVideoIndex	INTEGER
	mhvsVPVideoName	DisplayString
	mhvsVPVideoNumCopies	Gauge
	mhvsVPVideoSize	INTEGER
	mhvsVPVideoNumOpen	Gauge
	mhvsVPVideoStatus	INTEGER
	mhvsVPVideoContentSpace	INTEGER
	mhvsVPVideoIndexSpace	INTEGER

MhvsVPVideoInstEntry
SEQUENCE
	mhvsVPVideoInstVideoIndex	INTEGER
	mhvsVPVideoInstDiskIndex	INTEGER
	mhvsVPVideoInstNumOpen	Gauge
	mhvsVPVideoInstStatus	INTEGER
	mhvsVPVideoInstPath	DisplayString
	mhvsVPVideoInstIndex	INTEGER
	mhvsVPVideoInstSize	INTEGER

MhvsVPResourcesVPEntry
SEQUENCE
	mhvsVPResourcesVPIndex	INTEGER
	mhvsVPResourcesVPMax	Gauge
	mhvsVPResourcesVPUsed	Gauge
	mhvsVPResourcesVPNumStreams	Gauge
	mhvsVPResourcesVPStatus	INTEGER
	mhvsVPResourcesVPConnected	INTEGER
	mhvsVPResourcesVPHostIndex	INTEGER

MhvsVPResourcesDiskEntry
SEQUENCE
	mhvsVPResourcesDiskIndex	INTEGER
	mhvsVPResourcesDiskName	DisplayString
	mhvsVPResourcesDiskMax	Gauge
	mhvsVPResourcesDiskUsed	Gauge
	mhvsVPResourcesDiskNumStreams	Gauge
	mhvsVPResourcesDiskStatus	INTEGER
	mhvsVPResourcesDiskMaxCapacity	INTEGER
	mhvsVPResourcesDiskUsedCapacity	INTEGER
	mhvsVPResourcesDiskMaxSysCapacity	INTEGER
	mhvsVPResourcesDiskUsedSysCapacity	INTEGER

MhvsVPResourcesNetwEntry
SEQUENCE
	mhvsVPResourcesNetwIndex	INTEGER
	mhvsVPResourcesNetwMax	Gauge
	mhvsVPResourcesNetwUsed	Gauge
	mhvsVPResourcesNetwNumStreams	Gauge
	mhvsVPResourcesNetwType	INTEGER
	mhvsVPResourcesNetwId	DisplayString
	mhvsVPResourcesNetwStatus	INTEGER

MhvsVPResourcesSPEntry
SEQUENCE
	mhvsVPResourcesSPIndex	INTEGER
	mhvsVPResourcesSPMax	Gauge
	mhvsVPResourcesSPUsed	Gauge
	mhvsVPResourcesSPStatus	INTEGER
	mhvsVPResourcesSPConnected	INTEGER
	mhvsVPResourcesSPHostIndex	INTEGER

MhvsVPResourcesDiskAttEntry
SEQUENCE
	mhvsVPResourcesDiskAttDiskIndex	INTEGER
	mhvsVPResourcesDiskAttVPIndex	INTEGER
	mhvsVPResourcesDiskAttDir	DisplayString
	mhvsVPResourcesDiskAttStatus	INTEGER
	mhvsVPResourcesDiskAttIndex	INTEGER

MhvsVPResourcesNetwAttEntry
SEQUENCE
	mhvsVPResourcesNetwAttFromType	INTEGER
	mhvsVPResourcesNetwAttFromIndex	INTEGER
	mhvsVPResourcesNetwAttToType	INTEGER
	mhvsVPResourcesNetwAttToIndex	INTEGER
	mhvsVPResourcesNetwAttStatus	INTEGER
	mhvsVPResourcesNetwAttIndex	INTEGER
	mhvsVPResourcesNetwAttName	DisplayString

MhvsVPStreamsVideoEntry
SEQUENCE
	mhvsVPStreamsVideoSSEIndex	INTEGER
	mhvsVPStreamsVideoSIIndex	INTEGER
	mhvsVPStreamsVideoDiskIndex	INTEGER
	mhvsVPStreamsVideoVideoIndex	INTEGER

MhvsVPStreamsNetwEntry
SEQUENCE
	mhvsVPStreamsNetwSSEIndex	INTEGER
	mhvsVPStreamsNetwSIIndex	INTEGER
	mhvsVPStreamsNetwNetwType	INTEGER
	mhvsVPStreamsNetwNetwIndex	INTEGER

MhvsVPMenuEntry
SEQUENCE
	mhvsVPMenuIndex	INTEGER
	mhvsVPMenuName	DisplayString
	mhvsVPMenuNumCopies	Gauge
	mhvsVPMenuNumOpen	Gauge
	mhvsVPMenuStatus	INTEGER

MhvsVPMenuInstEntry
SEQUENCE
	mhvsVPMenuInstMenuIndex	INTEGER
	mhvsVPMenuInstDiskIndex	INTEGER
	mhvsVPMenuInstNumOpen	Gauge
	mhvsVPMenuInstStatus	INTEGER
	mhvsVPMenuInstPath	DisplayString
	mhvsVPMenuInstIndex	INTEGER

MediaHawkDVBEntry
SEQUENCE
	mhDVBStatus	INTEGER
	mhDVBName	DisplayString
	mhDVBMTU	INTEGER
	mhDVBReceivePackets	INTEGER
	mhDVBReceiveErrors	INTEGER
	mhDVBTransmitPackets	INTEGER
	mhDVBTransmitErrors	INTEGER
	mhDVBTransmitKBytesPerSec	INTEGER

MhDiskDrivesEntry
SEQUENCE
	mhDiskDriveName	DisplayString
	mhDiskDriveReads	INTEGER
	mhDiskDriveWrites	INTEGER
	mhDiskDriveReadKBytes	INTEGER
	mhDiskDriveWriteKBytes	INTEGER
	mhDiskDriveReadKBytesPerSec	INTEGER
	mhDiskDriveWriteKBytesPerSec	INTEGER

MhEnvironmentFanEntry
SEQUENCE
	mhEnvironmentFanLocation	DisplayString
	mhEnvironmentFanStatus	INTEGER

MhEnvironmentPowerSupplyEntry
SEQUENCE
	mhEnvironmentPowerSupplyLocation	DisplayString
	mhEnvironmentPowerSupplyStatus	INTEGER

MhEnvironmentTemperatureEntry
SEQUENCE
	mhEnvironmentTemperatureLocation	DisplayString
	mhEnvironmentTemperatureValue	INTEGER
	mhEnvironmentTemperatureRedLine	INTEGER

MhPartitionsEntry
SEQUENCE
	mhPartitionName	DisplayString
	mhPartitionType	DisplayString
	mhPartitionState	DisplayString
	mhPartitionActiveReadCount	INTEGER
	mhPartitionActiveWriteCount	INTEGER
	mhPartitionTotalErrors	INTEGER
	mhPartitionSliceSize	INTEGER
	mhPartitionSizeKbytes	INTEGER
	mhPartitionReaderMode	DisplayString
	mhPartitionWriterMode	INTEGER
	mhPartitionRestoreThrottle	INTEGER
	mhPartitionProgressMeter	DisplayString
	mhPartitionMemberCount	INTEGER
	mhPartitionMemberDevices	DisplayString
	mhPartitionStartRestore	INTEGER
	mhPartitionCancelRestore	INTEGER
	mpPartitionErrorMask	INTEGER
	mhPartitionHealth	DisplayString
	mhPartitionRestoreStatus	DisplayString
	mhPartitionRestoreDate	DateAndTime
	mhPartitionMountPoint	DisplayString
	mhPartitionFreeSpace	INTEGER

Defined Values

concurrentComputerCorporation		1.3.6.1.4.1.1457
OBJECT IDENTIFIER

mediaHawkVideoServer		1.3.6.1.4.1.1457.1
OBJECT IDENTIFIER

mediaHawkVSVP		1.3.6.1.4.1.1457.1.2
OBJECT IDENTIFIER

mhvsVPVideo		1.3.6.1.4.1.1457.1.2.1
OBJECT IDENTIFIER

mhvsVPResources		1.3.6.1.4.1.1457.1.2.2
OBJECT IDENTIFIER

mhvsVPStreams		1.3.6.1.4.1.1457.1.2.3
OBJECT IDENTIFIER

mhvsVPMenu		1.3.6.1.4.1.1457.1.2.4
OBJECT IDENTIFIER

mediaHawkVEMon		1.3.6.1.4.1.1457.1.3
OBJECT IDENTIFIER

mediaHawkDisk		1.3.6.1.4.1.1457.1.3.3
OBJECT IDENTIFIER

mediaHawkEnvironment		1.3.6.1.4.1.1457.1.3.4
OBJECT IDENTIFIER

mediaHawkVPMon		1.3.6.1.4.1.1457.1.4
OBJECT IDENTIFIER

mhvsVPVideoTable		1.3.6.1.4.1.1457.1.2.1.2
Table listing the Videos on the Video Server.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhvsVPVideoEntry

mhvsVPVideoEntry		1.3.6.1.4.1.1457.1.2.1.2.1
Entry for table mhvsVPVideoTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhvsVPVideoEntry

mhvsVPVideoIndex		1.3.6.1.4.1.1457.1.2.1.2.1.1
Unique identifier of this video
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65536

mhvsVPVideoName		1.3.6.1.4.1.1457.1.2.1.2.1.2
Name of this video
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mhvsVPVideoNumCopies		1.3.6.1.4.1.1457.1.2.1.2.1.3
Number of copies
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPVideoSize		1.3.6.1.4.1.1457.1.2.1.2.1.4
Size in KBytes of the video
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhvsVPVideoNumOpen		1.3.6.1.4.1.1457.1.2.1.2.1.5
Current number of streams using this video
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPVideoStatus		1.3.6.1.4.1.1457.1.2.1.2.1.6
Status of the video
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deleted(1), disabled(2), quiesce(3), failed(4), standby(5), enabled(6)

mhvsVPVideoContentSpace		1.3.6.1.4.1.1457.1.2.1.2.1.7
Space in KBytes of the content files belonging to the video
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhvsVPVideoIndexSpace		1.3.6.1.4.1.1457.1.2.1.2.1.8
Space in KBytes of the index files belonging to the video
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhvsVPVideoInstTable		1.3.6.1.4.1.1457.1.2.1.3
Table listing each instance of the Videos on the Video Server
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhvsVPVideoInstEntry

mhvsVPVideoInstEntry		1.3.6.1.4.1.1457.1.2.1.3.1
Entry for table mhvsVPVideoInstTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhvsVPVideoInstEntry

mhvsVPVideoInstVideoIndex		1.3.6.1.4.1.1457.1.2.1.3.1.1
Unique identifier of this video. Set to mhvsVPVideoIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65536

mhvsVPVideoInstDiskIndex		1.3.6.1.4.1.1457.1.2.1.3.1.3
The disk holding this instance. Set to mhvsVPResourcesDiskIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhvsVPVideoInstNumOpen		1.3.6.1.4.1.1457.1.2.1.3.1.4
Current number of streams using this video instance
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPVideoInstStatus		1.3.6.1.4.1.1457.1.2.1.3.1.5
The status of this video instance
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deleted(1), disabled(2), quiesce(3), failed(4), standby(5), enabled(6)

mhvsVPVideoInstPath		1.3.6.1.4.1.1457.1.2.1.3.1.6
Path to the video from the disk
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mhvsVPVideoInstIndex		1.3.6.1.4.1.1457.1.2.1.3.1.7
The index for this video instance
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65536

mhvsVPVideoInstSize		1.3.6.1.4.1.1457.1.2.1.3.1.8
Size in KBytes of the video instance
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhvsVPVideoTrapGeneration		1.3.6.1.4.1.1457.1.2.1.4
Controls when the mhvsVPVideoChangedStatus and mhvsVPVideoInstChangedStatus traps are generated. off => no traps are generated, on => video or video instance changes state
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	on(1)

mhvsVPVideoChangedStatus		57
Trap is issued when a video changes state depending on the setting of mhvsVPVideoTrapGeneration. The trap identifies the video and includes its new state
TRAP-TYPE

mhvsVPVideoInstChangedStatus		58
Trap is issued when a video instance changes state depending on the setting of mhvsVPVideoTrapGeneration. The trap identifies the video instance and includes its new state
TRAP-TYPE

mhvsVPResourcesMaxStreams		1.3.6.1.4.1.1457.1.2.2.1
The maximum number of streams supported by the Video Server
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPResourcesNumStreams		1.3.6.1.4.1.1457.1.2.2.2
The number of streams running on the Video Server
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPResourcesMaxBandwidth		1.3.6.1.4.1.1457.1.2.2.3
The maximum bandwidth in kbps supported by the Video Server
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPResourcesBandwidth		1.3.6.1.4.1.1457.1.2.2.4
The currently allocated bandwidth in kbps on the Video Server
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPResourcesVPTable		1.3.6.1.4.1.1457.1.2.2.5
Table listing the Video Pumps on the Video Server.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhvsVPResourcesVPEntry

mhvsVPResourcesVPEntry		1.3.6.1.4.1.1457.1.2.2.5.1
Entry for table mhvsVPResourcesVPTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhvsVPResourcesVPEntry

mhvsVPResourcesVPIndex		1.3.6.1.4.1.1457.1.2.2.5.1.1
A unique number within the Video Server for the Video Pump
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65536

mhvsVPResourcesVPMax		1.3.6.1.4.1.1457.1.2.2.5.1.2
The maximum resources for this Video Pump
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPResourcesVPUsed		1.3.6.1.4.1.1457.1.2.2.5.1.3
The used resources for this Video Pump
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPResourcesVPNumStreams		1.3.6.1.4.1.1457.1.2.2.5.1.4
The number of streams using this Video Pump
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPResourcesVPStatus		1.3.6.1.4.1.1457.1.2.2.5.1.5
The status of this Video Pump
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deleted(1), disabled(2), quiesce(3), failed(4), standby(5), enabled(6)

mhvsVPResourcesVPConnected		1.3.6.1.4.1.1457.1.2.2.5.1.6
Indicates whether this Video Pump is connected to the Video Server
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1)

mhvsVPResourcesVPHostIndex		1.3.6.1.4.1.1457.1.2.2.5.1.7
Set to spsHostsindex in spsHostsTable
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhvsVPResourcesDiskTable		1.3.6.1.4.1.1457.1.2.2.6
Table listing the Disk Resources on the Video Server.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhvsVPResourcesDiskEntry

mhvsVPResourcesDiskEntry		1.3.6.1.4.1.1457.1.2.2.6.1
Entry for table mhvsVPResourcesDiskTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhvsVPResourcesDiskEntry

mhvsVPResourcesDiskIndex		1.3.6.1.4.1.1457.1.2.2.6.1.1
A unique number within the Video Server for the disk
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65536

mhvsVPResourcesDiskName		1.3.6.1.4.1.1457.1.2.2.6.1.2
The name of the disk
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mhvsVPResourcesDiskMax		1.3.6.1.4.1.1457.1.2.2.6.1.3
The maximum resources for this disk
Status: mandatory	Access: read-write
OBJECT-TYPE
	Gauge

mhvsVPResourcesDiskUsed		1.3.6.1.4.1.1457.1.2.2.6.1.4
The used resources for this disk
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPResourcesDiskNumStreams		1.3.6.1.4.1.1457.1.2.2.6.1.5
The number of streams using this disk
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPResourcesDiskStatus		1.3.6.1.4.1.1457.1.2.2.6.1.6
The status of this disk
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deleted(1), disabled(2), quiesce(3), failed(4), standby(5), enabled(6)

mhvsVPResourcesDiskMaxCapacity		1.3.6.1.4.1.1457.1.2.2.6.1.7
The maximum capacity in KBytes of the content partition of this disk
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhvsVPResourcesDiskUsedCapacity		1.3.6.1.4.1.1457.1.2.2.6.1.8
The used capacity in KBytes of the content partition of this disk
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhvsVPResourcesDiskMaxSysCapacity		1.3.6.1.4.1.1457.1.2.2.6.1.9
The maximum capacity in KBytes of the /sys partition of this disk
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhvsVPResourcesDiskUsedSysCapacity		1.3.6.1.4.1.1457.1.2.2.6.1.10
The used capacity in KBytes of the /sys partition of this disk
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhvsVPResourcesNetwTable		1.3.6.1.4.1.1457.1.2.2.7
Table listing the Network Resources on the Video Server.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhvsVPResourcesNetwEntry

mhvsVPResourcesNetwEntry		1.3.6.1.4.1.1457.1.2.2.7.1
Entry for table mhvsVPResourcesNetwTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhvsVPResourcesNetwEntry

mhvsVPResourcesNetwIndex		1.3.6.1.4.1.1457.1.2.2.7.1.1
A unique number within the Video Server for the network
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65536

mhvsVPResourcesNetwMax		1.3.6.1.4.1.1457.1.2.2.7.1.3
The maximum resources for this network
Status: mandatory	Access: read-write
OBJECT-TYPE
	Gauge

mhvsVPResourcesNetwUsed		1.3.6.1.4.1.1457.1.2.2.7.1.4
The used resources for this network
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPResourcesNetwNumStreams		1.3.6.1.4.1.1457.1.2.2.7.1.5
The number of streams using this network
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPResourcesNetwType		1.3.6.1.4.1.1457.1.2.2.7.1.6
The type of this network
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	dvb(3), qam(4), codec(5), atm(6), ip(7)

mhvsVPResourcesNetwId		1.3.6.1.4.1.1457.1.2.2.7.1.7
The id. of this network For DVB or QAM, this is the TSID. For CODEC, this is the Codec port number. For ATM, this is the resource id.. For IP, this is a user-defined identifier.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mhvsVPResourcesNetwStatus		1.3.6.1.4.1.1457.1.2.2.7.1.8
The status of this network
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deleted(1), disabled(2), quiesce(3), failed(4), standby(5), enabled(6)

mhvsVPResourcesSPTable		1.3.6.1.4.1.1457.1.2.2.8
Table listing the Service Providers on the Video Server.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhvsVPResourcesSPEntry

mhvsVPResourcesSPEntry		1.3.6.1.4.1.1457.1.2.2.8.1
Entry for table mhvsVPResourcesSPTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhvsVPResourcesSPEntry

mhvsVPResourcesSPIndex		1.3.6.1.4.1.1457.1.2.2.8.1.1
A unique number within the Video Server for the Service Provider
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65536

mhvsVPResourcesSPMax		1.3.6.1.4.1.1457.1.2.2.8.1.2
The maximum resources (i.e. sessions) for this Service Provider
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPResourcesSPUsed		1.3.6.1.4.1.1457.1.2.2.8.1.3
The used resources (i.e. sessions) for this Service Provider
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPResourcesSPStatus		1.3.6.1.4.1.1457.1.2.2.8.1.4
The status of this Service Provider
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deleted(1), disabled(2), quiesce(3), failed(4), standby(5), enabled(6)

mhvsVPResourcesSPConnected		1.3.6.1.4.1.1457.1.2.2.8.1.5
Indicates whether this Service Provider is connected to the Video Server
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1)

mhvsVPResourcesSPHostIndex		1.3.6.1.4.1.1457.1.2.2.8.1.6
Set to spsHostsindex in spsHostsTable
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhvsVPResourcesDiskAttTable		1.3.6.1.4.1.1457.1.2.2.9
Table listing the Disk Attachments on the Video Server.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhvsVPResourcesDiskAttEntry

mhvsVPResourcesDiskAttEntry		1.3.6.1.4.1.1457.1.2.2.9.1
Entry for table mhvsVPResourcesDiskAttTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhvsVPResourcesDiskAttEntry

mhvsVPResourcesDiskAttDiskIndex		1.3.6.1.4.1.1457.1.2.2.9.1.1
Corresponds to mhvsVPResourcesDiskIndex in mhvsVPResourcesDiskTable
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65536

mhvsVPResourcesDiskAttVPIndex		1.3.6.1.4.1.1457.1.2.2.9.1.2
Corresponds to mhvsVPResourcesVPIndex in mhvsVPResourcesVPTable
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhvsVPResourcesDiskAttDir		1.3.6.1.4.1.1457.1.2.2.9.1.3
The mount-point of the disk on the host
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mhvsVPResourcesDiskAttStatus		1.3.6.1.4.1.1457.1.2.2.9.1.4
The status of this disk to VP attachment
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deleted(1), disabled(2), quiesce(3), failed(4), standby(5), enabled(6)

mhvsVPResourcesDiskAttIndex		1.3.6.1.4.1.1457.1.2.2.9.1.5
Index into list of attachments for this disk
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65536

mhvsVPResourcesNetwAttTable		1.3.6.1.4.1.1457.1.2.2.10
Table listing the NetwAttork Resource Attachments on the Video Server.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhvsVPResourcesNetwAttEntry

mhvsVPResourcesNetwAttEntry		1.3.6.1.4.1.1457.1.2.2.10.1
Entry for table mhvsVPResourcesNetwAttTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhvsVPResourcesNetwAttEntry

mhvsVPResourcesNetwAttFromType		1.3.6.1.4.1.1457.1.2.2.10.1.1
Corresponds to mhvsVPResourcesNetwType in mhvsVPResourcesNetwTable
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	dvb(3), qam(4), codec(5), atm(6), ip(7)

mhvsVPResourcesNetwAttFromIndex		1.3.6.1.4.1.1457.1.2.2.10.1.2
Corresponds to mhvsVPResourcesNetwIndex in mhvsVPResourcesNetwTable
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65536

mhvsVPResourcesNetwAttToType		1.3.6.1.4.1.1457.1.2.2.10.1.3
The type of resource to which the network resource is attached
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	vp(1), disk(2), dvb(3), qam(4), codec(5), atm(6), ip(7)

mhvsVPResourcesNetwAttToIndex		1.3.6.1.4.1.1457.1.2.2.10.1.4
If mhvsVPResourcesNetwAttToType is vp, this corresponds to mhvsVPResourcesVpId in mhvsVPResourcesVPTable. Otherwise, it corresponds to mhvsVPResourcesNetwIndex in mhvsVPResourcesNetwTable
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhvsVPResourcesNetwAttStatus		1.3.6.1.4.1.1457.1.2.2.10.1.5
The status of this network attachment
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deleted(1), disabled(2), quiesce(3), failed(4), standby(5), enabled(6)

mhvsVPResourcesNetwAttIndex		1.3.6.1.4.1.1457.1.2.2.10.1.6
Index into list of attachments for this network resource
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65536

mhvsVPResourcesNetwAttName		1.3.6.1.4.1.1457.1.2.2.10.1.7
Name for this network attachment
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mhvsVPResourcesTrapGeneration		1.3.6.1.4.1.1457.1.2.2.11
Controls when the mhvsVPResources...ChangedStatus traps are generated. off => no traps are generated, on => resource changes state
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	on(1)

mhvsVPResourcesSPChangedStatus		51
Trap is issued when a Service Provider changes state depending on the setting of mhvsVPResourcesTrapGeneration. The trap identifies the SP and includes its new state
TRAP-TYPE

mhvsVPResourcesVPChangedStatus		52
Trap is issued when a Video Pump changes state depending on the setting of mhvsVPResourcesTrapGeneration. The trap identifies the VP and includes its new state
TRAP-TYPE

mhvsVPResourcesDiskChangedStatus		53
Trap is issued when a Disk Resource changes state depending on the setting of mhvsVPResourcesTrapGeneration. The trap identifies the Disk and includes its new state
TRAP-TYPE

mhvsVPResourcesDiskAttChangedStatus		54
Trap is issued when a Disk Attachment changes state depending on the setting of mhvsVPResourcesTrapGeneration. The trap identifies the Disk Attachment and includes its new state
TRAP-TYPE

mhvsVPResourcesNetwChangedStatus		55
Trap is issued when a Network Resource changes state depending on the setting of mhvsVPResourcesTrapGeneration. The trap identifies the Network Resource and includes its new state
TRAP-TYPE

mhvsVPResourcesNetwAttChangedStatus		56
Trap is issued when a Network Attachment changes state depending on the setting of mhvsVPResourcesTrapGeneration. The trap identifies the Network Attachment and includes its new state
TRAP-TYPE

mhvsVPStreamsTrapGeneration		1.3.6.1.4.1.1457.1.2.3.1
Controls when the mhvsVPStreamChangedStatus trap is generated. openClose => streams opened or closed, stateChange => streams opened or closed or change state
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), openClose(2), stateChange(3)

mhvsVPStreamsVideoTable		1.3.6.1.4.1.1457.1.2.3.2
Table relating Video Instances to Stream Instances
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhvsVPStreamsVideoEntry

mhvsVPStreamsVideoEntry		1.3.6.1.4.1.1457.1.2.3.2.1
Entry for table mhvsVPStreamsVideoTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhvsVPStreamsVideoEntry

mhvsVPStreamsVideoSSEIndex		1.3.6.1.4.1.1457.1.2.3.2.1.1
Set to spsStreamInstStreamSEIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

mhvsVPStreamsVideoSIIndex		1.3.6.1.4.1.1457.1.2.3.2.1.2
Set to spsStreamInstIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

mhvsVPStreamsVideoDiskIndex		1.3.6.1.4.1.1457.1.2.3.2.1.3
Set to mhvsVPVideoInstDiskIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65536

mhvsVPStreamsVideoVideoIndex		1.3.6.1.4.1.1457.1.2.3.2.1.4
Set to mhvsVPVideoInstVideoIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65536

mhvsVPStreamsNetwTable		1.3.6.1.4.1.1457.1.2.3.3
Table relating Network Resources to Stream Instances.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhvsVPStreamsNetwEntry

mhvsVPStreamsNetwEntry		1.3.6.1.4.1.1457.1.2.3.3.1
Entry for table mhvsVPStreamsNetwTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhvsVPStreamsNetwEntry

mhvsVPStreamsNetwSSEIndex		1.3.6.1.4.1.1457.1.2.3.3.1.1
Corresponds to spsStreamInstStreamSEIndex in spsStreamInstTable
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

mhvsVPStreamsNetwSIIndex		1.3.6.1.4.1.1457.1.2.3.3.1.2
Corresponds to spsStreamInstIndex in spsStreamInstTable
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

mhvsVPStreamsNetwNetwType		1.3.6.1.4.1.1457.1.2.3.3.1.3
Corresponds to mhvsVPResourcesNetwType in mhvsVPResourcesNetwTable
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	dvb(3), qam(4), codec(5), atm(6), ip(7)

mhvsVPStreamsNetwNetwIndex		1.3.6.1.4.1.1457.1.2.3.3.1.4
Corresponds to mhvsVPResourcesNetwIndex in mhvsVPResourcesNetwTable
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhvsVPStreamChangedStatus		50
Trap is issued when a stream is opened or closed or changes state depending on the setting of mhvsVPStreamsTrapGeneration. The trap contains the new state of the stream ('unknown' if closed)
TRAP-TYPE

mhvsVPMenuTable		1.3.6.1.4.1.1457.1.2.4.2
Table listing the Menus on the Video Server.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhvsVPMenuEntry

mhvsVPMenuEntry		1.3.6.1.4.1.1457.1.2.4.2.1
Entry for table mhvsVPMenuTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhvsVPMenuEntry

mhvsVPMenuIndex		1.3.6.1.4.1.1457.1.2.4.2.1.1
Unique identifier of this menu
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65536

mhvsVPMenuName		1.3.6.1.4.1.1457.1.2.4.2.1.2
Name of this menu
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mhvsVPMenuNumCopies		1.3.6.1.4.1.1457.1.2.4.2.1.3
Number of copies
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPMenuNumOpen		1.3.6.1.4.1.1457.1.2.4.2.1.5
Current number of streams using this menu
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPMenuStatus		1.3.6.1.4.1.1457.1.2.4.2.1.6
Status of the menu
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deleted(1), disabled(2), quiesce(3), failed(4), standby(5), enabled(6)

mhvsVPMenuInstTable		1.3.6.1.4.1.1457.1.2.4.3
Table listing each instance of the Menus on the Video Server
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhvsVPMenuInstEntry

mhvsVPMenuInstEntry		1.3.6.1.4.1.1457.1.2.4.3.1
Entry for table mhvsVPMenuInstTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhvsVPMenuInstEntry

mhvsVPMenuInstMenuIndex		1.3.6.1.4.1.1457.1.2.4.3.1.1
Unique identifier of this menu. Set to mhvsVPMenuIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65536

mhvsVPMenuInstDiskIndex		1.3.6.1.4.1.1457.1.2.4.3.1.3
The disk holding this instance. Set to mhvsVPResourcesDiskIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhvsVPMenuInstNumOpen		1.3.6.1.4.1.1457.1.2.4.3.1.4
Current number of streams using this menu instance
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mhvsVPMenuInstStatus		1.3.6.1.4.1.1457.1.2.4.3.1.5
The status of this menu instance
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deleted(1), disabled(2), quiesce(3), failed(4), standby(5), enabled(6)

mhvsVPMenuInstPath		1.3.6.1.4.1.1457.1.2.4.3.1.6
Path to the menu from the disk
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mhvsVPMenuInstIndex		1.3.6.1.4.1.1457.1.2.4.3.1.7
The index for this menu instance
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65536

mhvsVPMenuTrapGeneration		1.3.6.1.4.1.1457.1.2.4.4
Controls when the mhvsVPMenuChangedStatus and mhvsVPMenuInstChangedStatus traps are generated. off => no traps are generated, on => menu or menu instance changes state
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	on(1)

mhvsVPMenuChangedStatus		59
Trap is issued when a menu changes state depending on the setting of mhvsVPMenuTrapGeneration. The trap identifies the menu and includes its new state
TRAP-TYPE

mhvsVPMenuInstChangedStatus		60
Trap is issued when a menu instance changes state depending on the setting of mhvsVPMenuTrapGeneration. The trap identifies the menu instance and includes its new state
TRAP-TYPE

mhProcessStart		101
Trap is issued when VEMon successfully started
TRAP-TYPE

mhProcessTermination		102
Trap is issued when VEMon has terminated
TRAP-TYPE

mhEnvironmentFanFailure		106
Trap is issued when A Fan has failed
TRAP-TYPE

mhEnvironmentPowerSupplyFailure		107
Trap is issued when A Power Supply has failed
TRAP-TYPE

mhEnvironmentTemperatureAlarm		108
Trap is issued when Over Temperature is detected
TRAP-TYPE

mediaHawkVEMonAlive		1.3.6.1.4.1.1457.1.3.1
Always 1. If VEMon is not running on the target system, a snmp error or timeout will occur.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1)

mediaHawkDVBTable		1.3.6.1.4.1.1457.1.3.2
Table listing the DVBs on the IVM.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MediaHawkDVBEntry

mediaHawkDVBEntry		1.3.6.1.4.1.1457.1.3.2.1
Entry for table mediaHawkDVBTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MediaHawkDVBEntry

mhDVBStatus		1.3.6.1.4.1.1457.1.3.2.1.1
'1' if the DVB-ASI card is on-line and operational, '0' if not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1)

mhDVBName		1.3.6.1.4.1.1457.1.3.2.1.2
The device name of the DVB-ASI software device, currently either 'gi0' or 'mh0'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..255)

mhDVBMTU		1.3.6.1.4.1.1457.1.3.2.1.3
The MTU (maximum transmission unit) size for the DVB card Interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhDVBReceivePackets		1.3.6.1.4.1.1457.1.3.2.1.4
Total packets received by this DVB-ASI card. Normally 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhDVBReceiveErrors		1.3.6.1.4.1.1457.1.3.2.1.5
Receive errors detected by this DVB-ASI card. Normally 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhDVBTransmitPackets		1.3.6.1.4.1.1457.1.3.2.1.6
Total packets transmitted by this DVB-ASI card since the system was last restarted. Packets are 48128 bytes long.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhDVBTransmitErrors		1.3.6.1.4.1.1457.1.3.2.1.7
Total number of transmit errors detected by this DVB-ASI card since the system was last restarted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhDVBTransmitKBytesPerSec		1.3.6.1.4.1.1457.1.3.2.1.8
Average number of 1K bytes transferred per second over the last 10 seconds for this DVB-ASI card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhDiskNumDisks		1.3.6.1.4.1.1457.1.3.3.1
Total number of disk drives accessible to this CPU. Determines the number of entries in the following disk information variables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhDiskKBytesPerSec		1.3.6.1.4.1.1457.1.3.3.2
Total number of Kilobytes per second of disk activity from this particular CPU from all drives connected to it. Averaged over the last 10 seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhDiskDrivesTable		1.3.6.1.4.1.1457.1.3.3.3
Table listing the Disk Drives on the IVM.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhDiskDrivesEntry

mhDiskDrivesEntry		1.3.6.1.4.1.1457.1.3.3.3.1
Entry for table mhDiskDrivesTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhDiskDrivesEntry

mhDiskDriveName		1.3.6.1.4.1.1457.1.3.3.3.1.1
Returns a string identifying the particular drive. The first 3 characters give the controller name, the next digit is the controller number. This is followed by a logical drive number. I.e. fib0_12. This drive number does not correspond to any other value in this MIB.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..255)

mhDiskDriveReads		1.3.6.1.4.1.1457.1.3.3.3.1.2
The total number of read commands issued to the drive from this system since the system was booted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhDiskDriveWrites		1.3.6.1.4.1.1457.1.3.3.3.1.3
The total number of write commands issued to the drive from this system since the system was booted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhDiskDriveReadKBytes		1.3.6.1.4.1.1457.1.3.3.3.1.4
The total quantity of data read since the system was booted off of the specified drive. Counted in units of 1024 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhDiskDriveWriteKBytes		1.3.6.1.4.1.1457.1.3.3.3.1.5
The total quantity of data written to the specified drive since the system was booted. Counted in units of 1024 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhDiskDriveReadKBytesPerSec		1.3.6.1.4.1.1457.1.3.3.3.1.6
Average number of bytes read off of the specified drive from this system measured in units of 1024 bytes. This average is over the last 5 seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhDiskDriveWriteKBytesPerSec		1.3.6.1.4.1.1457.1.3.3.3.1.7
Average number of bytes written to the specified drive from this system measured in units of 1024 bytes. This average is over the last 5 seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhContentMounted		1.3.6.1.4.1.1457.1.3.3.4
Returns an integer to indicate that the Video Content disk partition is mounted and on-line. A 1 indicates that the content is on-line, a 0 indicates it is not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1)

mhEnvironmentFanTable		1.3.6.1.4.1.1457.1.3.4.1
Table listing the Fans on the IVM.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhEnvironmentFanEntry

mhEnvironmentFanEntry		1.3.6.1.4.1.1457.1.3.4.1.1
Entry for table mhEnvironmentFanTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhEnvironmentFanEntry

mhEnvironmentFanLocation		1.3.6.1.4.1.1457.1.3.4.1.1.1
Returns a string indicating the Video Array ID followed by the number, such As '1A,0' for the first fan, '1A,2' for the third fan, etc.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..255)

mhEnvironmentFanStatus		1.3.6.1.4.1.1457.1.3.4.1.1.2
Returns an integer of either 0 if the fan has failed or 1 if the fan is working properly.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	working(1)

mhEnvironmentPowerSupplyTable		1.3.6.1.4.1.1457.1.3.4.2
Table listing the Power Supplies on the IVM.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhEnvironmentPowerSupplyEntry

mhEnvironmentPowerSupplyEntry		1.3.6.1.4.1.1457.1.3.4.2.1
Entry for table mhEnvironmentPowerSupplyTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhEnvironmentPowerSupplyEntry

mhEnvironmentPowerSupplyLocation		1.3.6.1.4.1.1457.1.3.4.2.1.1
Returns a string indicating the Video Array ID followed by the number, such as '1A,0' for the left supply, '1A,2' for the right supply, etc.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..255)

mhEnvironmentPowerSupplyStatus		1.3.6.1.4.1.1457.1.3.4.2.1.2
Returns an integer as follows: -1 if the power supply is missing or not plugged in, 0 if the power supply has failed, or 1 if the power supply is working properly.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	mising(-1), working(1)

mhEnvironmentTemperatureTable		1.3.6.1.4.1.1457.1.3.4.3
Table listing the Temperature sensors on the IVM.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhEnvironmentTemperatureEntry

mhEnvironmentTemperatureEntry		1.3.6.1.4.1.1457.1.3.4.3.1
Entry for table mhEnvironmentTemperatureTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhEnvironmentTemperatureEntry

mhEnvironmentTemperatureLocation		1.3.6.1.4.1.1457.1.3.4.3.1.1
Returns a string indicating the location of the related temperature sensor, such as 'Inlet LR' for lower right air inlet sensor.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..255)

mhEnvironmentTemperatureValue		1.3.6.1.4.1.1457.1.3.4.3.1.2
Returns the temperature of the related sensor, in degrees C.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhEnvironmentTemperatureRedLine		1.3.6.1.4.1.1457.1.3.4.3.1.3
Returns the maximum permissible temperature of the related sensor, in In degrees C. Temperatures over this value may cause a system failure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mediaHawkVideoEngineHealth		1.3.6.1.4.1.1457.1.3.5
Returns a 1, 2, or 3 for the health of the addressed engine. 1 is red (something is down); 2 = yellow; 3 = green. Checks status of DVB card, etc.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	red(1), yellow(2), green(3)

mediaHawkArrayHealth		1.3.6.1.4.1.1457.1.3.6
Returns a 1, 2, or 3 for the health of the overall video array. 1 is red; (something is down); 2 = yellow; 3 = green. Checks particular engine to which the value is addressed, along with the health of the disks, power supplies, fans, etc.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	red(1), yellow(2), green(3)

mediaHawkShutdown		1.3.6.1.4.1.1457.1.3.7
A writable variable used to request a particular engine or full video array to shutdown or restart. Passes a string indicating the engine or array followed by a code indicating the function to perform.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

mediaHawkDiskDisable		1.3.6.1.4.1.1457.1.3.8
A writable variable used to request a particular disk drive to be disabled and spun down. Passes a string indicating the array followed by the drive position, such as 1A2.3. Returns a string indicating status of the operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

mediaHawkDiskEnable		1.3.6.1.4.1.1457.1.3.9
A writable variable used to request a particular disk drive to be enabled and spun up. Passes a string indicating the array followed by the drive position, such as 1A2.3. Returns a string indicating status of the operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

vpProcessStart		103
Trap is issued when VPMon successfully started
TRAP-TYPE

vpProcessTermination		104
Trap is issued when VPMon has terminated
TRAP-TYPE

vpPartitionStateChanged		105
Trap is issued when the mirror state has changed
TRAP-TYPE

mediaHawkVPMonAlive		1.3.6.1.4.1.1457.1.4.1
Always 1. If VPMon is not running on the target system, a snmp error or timeout will occur.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1)

mhPartitionLastUnit		1.3.6.1.4.1.1457.1.4.2
Returns last currently configured Virtual Partition number. A value of -1 indicates that there are currently no configured virtual partitions in the target system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhPartitionCount		1.3.6.1.4.1.1457.1.4.3
Returns the maximum number of virtual partitions that may be configured in the target system. A value of 0 indicates that the Virtual Partition driver has not been configured into the kernel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhPartitionsTable		1.3.6.1.4.1.1457.1.4.4
Table listing the Partitions on the IVM.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MhPartitionsEntry

mhPartitionsEntry		1.3.6.1.4.1.1457.1.4.4.1
Entry for table mhPartitionsTable
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MhPartitionsEntry

mhPartitionName		1.3.6.1.4.1.1457.1.4.4.1.1
Returns the path name of the raw device associated with VP unit 'N'. Examples: mhPartitionName.0 Returns '/dev/rdsk/vp0' mhPartitionName.1 Returns '/dev/rdsk/vp1'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..255)

mhPartitionType		1.3.6.1.4.1.1457.1.4.4.1.2
Returns current configuration of VP unit 'N'. Legal values are: 'unconfigured' partition has not been configured 'mirror' configured as a mirrored device 'stripe' configured as a striped device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mhPartitionState		1.3.6.1.4.1.1457.1.4.4.1.3
Returns the current state of VP unit 'N'. Legal values are: 'unconfigured' partition has not been configured 'striped' configured as a striped device 'verifying' mirror is currently synchronized and is executing a mirror integrity check. 'restoring' mirror is currently being restored. 'synchronized mirror is currently synchronized. 'primary disk failure' a primary disk failure has caused the mirror to loose synchronization. The primary disk device requires maintenance. 'secondary disk failure' a secondary disk failure has caused the mirror to loose synchronization. The secondary disk device requires maintenance. 'primary+secondary disk failure' 'tertiary disk failure' 'primary+tertiary disk failure' 'secondary+tertiary disk failure' 'triple disk failure' 'unsynchronized' the mirror is not synchronized and needs to be restored. This state occurs as a result of a system panic or hang, not as a result of a disk failure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mhPartitionActiveReadCount		1.3.6.1.4.1.1457.1.4.4.1.4
Returns the current number of outstanding read requests on VP unit 'N'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhPartitionActiveWriteCount		1.3.6.1.4.1.1457.1.4.4.1.5
Returns the current number of outstanding write requests on VP unit 'N'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhPartitionTotalErrors		1.3.6.1.4.1.1457.1.4.4.1.6
The total number of I/O errors on VP unit 'N' since system initialization.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhPartitionSliceSize		1.3.6.1.4.1.1457.1.4.4.1.7
If mhPartitionType='stripe', this is the stripe size as defined by vpinit(1m). Otherwise, a 0 is returned.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhPartitionSizeKbytes		1.3.6.1.4.1.1457.1.4.4.1.8
The size, in kilobytes, of this VP is returned.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhPartitionReaderMode		1.3.6.1.4.1.1457.1.4.4.1.9
none The VP is not a mirror. primary When this mirror is synchronized, all read requests will be scheduled exclusively to the primary partition. secondary When this mirror is synchronized, all read requests will be scheduled exclusively to the secondary partition. distributed When this mirror is synchronized, all read requests will be distributed between the two partitions.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

mhPartitionWriterMode		1.3.6.1.4.1.1457.1.4.4.1.10
-1 The VP is not a mirror. 0 When this mirror is synchronized, the first write to this device will result in the on-disk state of the mirror to be marked 'dirty'. The final close(2) of this VP will result in the VP being marked 'clean'. These on-disk states are used during system crash recover to maintain the integrity of the mirror. >0 When this mirror is synchronized, the first write to this VP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

mhPartitionRestoreThrottle		1.3.6.1.4.1.1457.1.4.4.1.11
During a mirrored restore or verify operation, an artificial delay may be performed between each read/write (restore) or read/read (verify) sequence. This value is the number of microseconds to delay. Note that the VP driver converts this value into a number of clock 'ticks', so microsecond resolution is not actually possible. Specifying a delay between 1 and 16666 results in a 1 tick delay, between 16667 and 33333 results in a 2 tick delay, etc. 0 No delay is performed. This results in the fastest possible restoration/verification of the mirror at the expense of I/O bandwidth. >0 The specified delay is performed. This lengthens the restoration/verification process, but is more friendly to other transfers which are taking place on the same controller(s).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

mhPartitionProgressMeter		1.3.6.1.4.1.1457.1.4.4.1.12
During a mirrored restore or verify operation, this value indicates the completion percentage. This value is always between '0.0%' and '100.0%'. A synchronized mirror will report this value as '100.0%'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mhPartitionMemberCount		1.3.6.1.4.1.1457.1.4.4.1.13
Returns the number of sub-devices which comprise this VP unit. Unconfigured VPs return 0, mirror VPs return 2, and striped VP return the number of striped partitions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhPartitionMemberDevices		1.3.6.1.4.1.1457.1.4.4.1.14
Returns the names of the sub-devices which comprise this VP unit. Normally, the named devices are the same as found in /dev/dsk. For example: 3s0 4s0. In the event that the device node for the configured device cannot be located, the major and minor number will be returned (this is very unlikely to happen). For example: 101,57856.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mhPartitionStartRestore		1.3.6.1.4.1.1457.1.4.4.1.15
Returns a 1 if a restore or verify operation is currently in progress, or a 0 if not. This option can be used to initiate a repair, restore, or verify operation as follows: 1 Repair (vpinit -R equivalent) 2 Restore (vpinit -r equivalent) 3 Repair and Restore (vpinit -Rr equivalent) 4 Verify (vpinit -t equivalent) All other set values are silently ignored.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

mhPartitionCancelRestore		1.3.6.1.4.1.1457.1.4.4.1.16
When read, returns a 0. When set to a value of 1, the currently executing restore or verify operation is terminated. This operation is ignored if any value other than 1 is set, or if the specified VP device is not currently restoring or verifying the mirror.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

mpPartitionErrorMask		1.3.6.1.4.1.1457.1.4.4.1.17
Returns an integer value [0..7] which represents a bitmask of member devices which have reported an I/O error. This value is a logical 'or' of all errant partition members. The bitmask is encoded as follows: 0 No members have reported a failure (green). 1 Primary member failure (yellow). 2 Secondary member failure (yellow). 3 Primary and secondary member failures (red). 4 Tertiary member failure (yellow). 5 Primary and tertiary member failures (red). 6 Secondary and tertiary member failures (red). 7 Primary, secondary and tertiary member failures (red).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

mhPartitionHealth		1.3.6.1.4.1.1457.1.4.4.1.18
Returns a string which indicates the overall health of the VP subsystem: none This device is not a mirror. red A double or triple drive failure has occurred. yellow A single drive fault has occurred on the mirrored set. green All members of the mirror are synchronized.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mhPartitionRestoreStatus		1.3.6.1.4.1.1457.1.4.4.1.19
Returns a string which indicates the restore/verify status associated with either the current, or last, restore/verify operation performed. NOTE: This status does NOT reflect the current status of the mirror. This is simply a historical log of the last restore or verify command which started execution on the associated VP device. For example, this status may report a successfully executed restore operation but the mirror may have lost synchronization in the time period since the execution of the restore. The possible strings that can be returned are: restore/verify not run since reboot The restore/verify status is not persistent over kernel reboots. This status is returned whenever the restore or verify commands have not been issued since the last reboot. restore successful The last command issued to this VP was a restore which was successful. verify successful The last command issued to this VP was a verify which was successful. restore cleared read errors The restore cleared the VP's read error counters. A physical restore operation was not performed. restore operation active A restore operation is currently active on this VP. verify operation active A verify operation is currently active on this VP. restore was canceled A restore operation was started but the canceled at the user's request. verify was canceled A verify operation was started but the canceled at the user's request. mirror needs repair A restore operation was attempted on a mirror that need to be repaired. memory allocation failure Buffer allocation necessary to perform a restore or verify operation were not available. cannot verify a 'forced' mirror A verify operation was attempted on a mirror that was created using the 'force' option. Since the mirror was never synchronized on a block-by-block basis, the verify operation is expected to fail. synchronization was lost during verify The verify operation was aborted due to a loss of synchronization. The error causing the loss of synchronization was not associated with the verify operation (an external event caused the loss). error reading primary device A restore or verify command aborted due to a read error on the primary device during the operation. error writing primary device A restore command aborted due to a write error on the primary device during the restore operation. error reading secondary device A restore or verify command aborted due to a read error on the secondary device during the operation. error writing secondary device A restore command aborted due to a write error on the secondary device during the restore operation. error accessing tertiary device A restore or verify command aborted due to failure either communicating with a Loop B client system or because of a read or write error on the tertiary device. verify error A verify error occured between the primary and secondary mirrored device. tertiary device verify error A verify error occured between the primary and tertiary mirrored device. status unavailable The restore status returned was invalid.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mhPartitionRestoreDate		1.3.6.1.4.1.1457.1.4.4.1.20
Returns the date and time of the last partition restore, in DateAndTime format of 11 octets.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DateAndTime

mhPartitionMountPoint		1.3.6.1.4.1.1457.1.4.4.1.21
Returns a string denoting the mount-point name if this partition is the mount point for any file system. A null string is returned if this partition is not a mount point. MediaHawk Model 2000 Systems only.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mhPartitionFreeSpace		1.3.6.1.4.1.1457.1.4.4.1.22
Applicable only if previous entry (mount point) returns a non-null string. Returns an integer from 0 to 99 indicating the percentage of free space in this partition. MediaHawk Model 2000 Systems only.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mhVPSubsystemHealth		1.3.6.1.4.1.1457.1.4.5
Returns a string which indicates the overall health of the VP subsystem: none There are no mirrors confgiured. red At least one partition has reported a double or triple drive failure. yellow At least one partition has reported a single member fault. green All partitions are synchronized .
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString