ME1200-ICFG-MIB

File: ME1200-ICFG-MIB.mib (12478 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
CISCOME1200-MIB ME1200-TC

Imported symbols

MODULE-COMPLIANCE OBJECT-GROUP MODULE-IDENTITY
OBJECT-TYPE TEXTUAL-CONVENTION me1200SwitchMgmt
ME1200DisplayString Integer32 Unsigned32
TruthValue

Defined Types

ME1200ConfigStatus  
This enumeration defines the type of configuration.
TEXTUAL-CONVENTION    
  INTEGER none(0), success(1), inProgress(2), errOtherInProcessing(3), errNoSuchFile(4), errSameSrcDst(5), errPermissionDenied(6), errLoadSrc(7), errSaveDst(8)  

ME1200ConfigType  
This enumeration defines the type of configuration.
TEXTUAL-CONVENTION    
  INTEGER none(0), runningConfig(1), startupConfig(2), configFile(3)  

ME1200ReloadDefault  
This enumeration defines the type of reload default.
TEXTUAL-CONVENTION    
  INTEGER none(0), default(1), defaultKeepIp(2)  

ME1200IcfgStatusFileEntry  
SEQUENCE    
  me1200IcfgStatusFileFileNo Integer32
  me1200IcfgStatusFileFileName ME1200DisplayString
  me1200IcfgStatusFileBytes Unsigned32
  me1200IcfgStatusFileModifiedTime ME1200DisplayString
  me1200IcfgStatusFileAttribute ME1200DisplayString

Defined Values

me1200IcfgMIB 1.3.6.1.4.1.9.9.815.1.101
This is a private version of ICFG
MODULE-IDENTITY    

me1200IcfgMIBObjects 1.3.6.1.4.1.9.9.815.1.101.1
OBJECT IDENTIFIER    

me1200IcfgStatus 1.3.6.1.4.1.9.9.815.1.101.1.3
OBJECT IDENTIFIER    

me1200IcfgStatusFileStatistics 1.3.6.1.4.1.9.9.815.1.101.1.3.1
OBJECT IDENTIFIER    

me1200IcfgStatusFileStatisticsNumberOfFiles 1.3.6.1.4.1.9.9.815.1.101.1.3.1.1
Number of files in flash.
OBJECT-TYPE    
  Unsigned32  

me1200IcfgStatusFileStatisticsTotalBytes 1.3.6.1.4.1.9.9.815.1.101.1.3.1.2
Total number of bytes used by all files in flash.
OBJECT-TYPE    
  Unsigned32  

me1200IcfgStatusFileTable 1.3.6.1.4.1.9.9.815.1.101.1.3.2
This is a table of status of files in flash.
OBJECT-TYPE    
  SEQUENCE OF  
    ME1200IcfgStatusFileEntry

me1200IcfgStatusFileEntry 1.3.6.1.4.1.9.9.815.1.101.1.3.2.1
Each entry has a set of file status.
OBJECT-TYPE    
  ME1200IcfgStatusFileEntry  

me1200IcfgStatusFileFileNo 1.3.6.1.4.1.9.9.815.1.101.1.3.2.1.1
The number of File. The number starts from 1.
OBJECT-TYPE    
  Integer32 0..2147483647  

me1200IcfgStatusFileFileName 1.3.6.1.4.1.9.9.815.1.101.1.3.2.1.2
File name.
OBJECT-TYPE    
  ME1200DisplayString Size(0..127)  

me1200IcfgStatusFileBytes 1.3.6.1.4.1.9.9.815.1.101.1.3.2.1.3
Number of bytes of the file.
OBJECT-TYPE    
  Unsigned32  

me1200IcfgStatusFileModifiedTime 1.3.6.1.4.1.9.9.815.1.101.1.3.2.1.4
Last modified time of the file.
OBJECT-TYPE    
  ME1200DisplayString Size(0..39)  

me1200IcfgStatusFileAttribute 1.3.6.1.4.1.9.9.815.1.101.1.3.2.1.5
File attribute in the linux format of drwxrwxrwx. 'd' is directory or not, the permission of rwx is for owner, group and other, respectively.
OBJECT-TYPE    
  ME1200DisplayString Size(0..15)  

me1200IcfgStatusCopyConfig 1.3.6.1.4.1.9.9.815.1.101.1.3.3
OBJECT IDENTIFIER    

me1200IcfgStatusCopyConfigStatus 1.3.6.1.4.1.9.9.815.1.101.1.3.3.1
The status indicates the status of current copy operation. none(0) means no copy operation. success(1) means copy operation is successful. inProgress(2) means current copy operation is in progress. errOtherInProcessing(3) means copy operation is failed due to other in processing. errNoSuchFile(4) means copy operation is failed due to file not existing. errSameSrcDst(5) means copy operation is failed due to the source and destination are the same. errPermissionDenied(6) means copy operation is failed due to the destination is not permitted to modify. errLoadSrc(7) means copy operation is failed due to the error to load source file. errSaveDst(8) means copy operation is failed due to the error to save or commit destination.
OBJECT-TYPE    
  ME1200ConfigStatus  

me1200IcfgControl 1.3.6.1.4.1.9.9.815.1.101.1.4
OBJECT IDENTIFIER    

me1200IcfgControlGlobals 1.3.6.1.4.1.9.9.815.1.101.1.4.1
OBJECT IDENTIFIER    

me1200IcfgControlGlobalsReloadDefault 1.3.6.1.4.1.9.9.815.1.101.1.4.1.1
Reset system to default. none(0) is to do nothing. default(1) is to reset the whole system to default. defaultKeepIp(2) is to reset system to default, but keep IP address of VLAN 1.
OBJECT-TYPE    
  ME1200ReloadDefault  

me1200IcfgControlGlobalsDeleteFile 1.3.6.1.4.1.9.9.815.1.101.1.4.1.2
Delete file in flash. The format is flash:filename. Where 'default-config' is read-only and not allowed to be deleted.
OBJECT-TYPE    
  ME1200DisplayString Size(0..127)  

me1200IcfgControlCopyConfig 1.3.6.1.4.1.9.9.815.1.101.1.4.2
OBJECT IDENTIFIER    

me1200IcfgControlCopyConfigCopy 1.3.6.1.4.1.9.9.815.1.101.1.4.2.1
Action to do copy or not. true(1) is to do the copy operation. false(2) is to do nothing
OBJECT-TYPE    
  TruthValue  

me1200IcfgControlCopyConfigSourceConfigType 1.3.6.1.4.1.9.9.815.1.101.1.4.2.2
Source configuration type. none(0) means no configuration file. runningConfig(1) means running configuration. startupConfig(2) means startup configuration file in flash. configFile(3) is the configuration file specified in SourceConfigFile.
OBJECT-TYPE    
  ME1200ConfigType  

me1200IcfgControlCopyConfigSourceConfigFile 1.3.6.1.4.1.9.9.815.1.101.1.4.2.3
Source configuration file. If the configuration file is in flash then the format is flash:'filename'. If the configuration file is from tftp then the format is tftp://server[:port]/path-to-file.
OBJECT-TYPE    
  ME1200DisplayString Size(0..127)  

me1200IcfgControlCopyConfigDestinationConfigType 1.3.6.1.4.1.9.9.815.1.101.1.4.2.4
Source configuration type. none(0) means no configuration file. runningConfig(1) means running configuration. startupConfig(2) means startup configuration file in flash. configFile(3) is the configuration file specified in DestinationConfigFile.
OBJECT-TYPE    
  ME1200ConfigType  

me1200IcfgControlCopyConfigDestinationConfigFile 1.3.6.1.4.1.9.9.815.1.101.1.4.2.5
Destination configuration file. If the configuration file is in flash then the format is flash:filename. If the configuration file is from tftp then the format is tftp://server[:port]/filename_with_path. Where 'default-config' is read-only and not allowed to be deleted.
OBJECT-TYPE    
  ME1200DisplayString Size(0..127)  

me1200IcfgControlCopyConfigMerge 1.3.6.1.4.1.9.9.815.1.101.1.4.2.6
This flag works only if DestinationConfigType is runningConfig(1). true(1) is to merge the source configuration into the current running configuration. false(2) is to replace the current running configuration with the source configuration.
OBJECT-TYPE    
  TruthValue  

me1200IcfgMIBConformance 1.3.6.1.4.1.9.9.815.1.101.2
OBJECT IDENTIFIER    

me1200IcfgMIBCompliances 1.3.6.1.4.1.9.9.815.1.101.2.1
OBJECT IDENTIFIER    

me1200IcfgMIBGroups 1.3.6.1.4.1.9.9.815.1.101.2.2
OBJECT IDENTIFIER    

me1200IcfgStatusFileStatisticsInfoGroup 1.3.6.1.4.1.9.9.815.1.101.2.2.1
A collection of objects suitable for bulk operations.
OBJECT-GROUP    

me1200IcfgStatusFileTableInfoGroup 1.3.6.1.4.1.9.9.815.1.101.2.2.2
A collection of objects suitable for bulk operations.
OBJECT-GROUP    

me1200IcfgStatusCopyConfigInfoGroup 1.3.6.1.4.1.9.9.815.1.101.2.2.3
A collection of objects suitable for bulk operations.
OBJECT-GROUP    

me1200IcfgControlGlobalsInfoGroup 1.3.6.1.4.1.9.9.815.1.101.2.2.4
A collection of objects suitable for bulk operations.
OBJECT-GROUP    

me1200IcfgControlCopyConfigInfoGroup 1.3.6.1.4.1.9.9.815.1.101.2.2.5
A collection of objects suitable for bulk operations.
OBJECT-GROUP    

me1200IcfgMIBCompliance 1.3.6.1.4.1.9.9.815.1.101.2.1.1
The compliance statement for the implementation.
MODULE-COMPLIANCE