MBG-SNMP-LTNG-MIB

File: MBG-SNMP-LTNG-MIB.mib (129519 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
MBG-SNMP-ROOT-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Unsigned32 Counter64 NOTIFICATION-TYPE
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
DisplayString mbgSnmpRoot MeinbergSwitch

Defined Types

MbgLtNgRefclockTableEntry  
SEQUENCE    
  mbgLtNgRefclockIndex Unsigned32
  mbgLtNgRefclockType INTEGER
  mbgLtNgRefclockUsage INTEGER
  mbgLtNgRefclockState INTEGER
  mbgLtNgRefclockSubstate INTEGER
  mbgLtNgRefclockStatusA Unsigned32
  mbgLtNgRefclockMaxStatusA Unsigned32
  mbgLtNgRefclockStatusB Unsigned32
  mbgLtNgRefclockMaxStatusB Unsigned32
  mbgLtNgRefclockAdditionalInfo INTEGER
  mbgLtNgRefclockLeapSecondDate DisplayString

MbgLtNgRefclockGpsTableEntry  
SEQUENCE    
  mbgLtNgRefclockGpsIndex Unsigned32
  mbgLtNgRefclockGpsLatitude DisplayString
  mbgLtNgRefclockGpsLongitude DisplayString
  mbgLtNgRefclockGpsAltitude Integer32
  mbgLtNgRefclockGpsTdop DisplayString
  mbgLtNgRefclockGpsPdop DisplayString
  mbgLtNgRefclockGpsUtcOffset Integer32

MbgLtNgPtpTableEntry  
SEQUENCE    
  mbgLtNgPtpIndex Unsigned32
  mbgLtNgPtpMode INTEGER
  mbgLtNgPtpPortState INTEGER
  mbgLtNgPtpGrandmasterMac DisplayString
  mbgLtNgPtpClockAccuracy INTEGER
  mbgLtNgPtpClockClass Unsigned32
  mbgLtNgPtpTimeSource INTEGER
  mbgLtNgPtpUtcOffset Unsigned32
  mbgLtNgPtpTimeSeconds Counter64
  mbgLtNgPtpTsuTime DisplayString
  mbgLtNgPtpSysTime DisplayString
  mbgLtNgPtpPortLinkup MeinbergSwitch
  mbgLtNgPtpOffsetFromGM DisplayString
  mbgLtNgPtpPathDelay DisplayString
  mbgLtNgPtpDelayMec INTEGER
  mbgLtNgPtpDomain Unsigned32
  mbgLtNgPtpGrandmasterUuid DisplayString
  mbgLtNgPtpLocalMac DisplayString
  mbgLtNgPtpDelayAsymmetry DisplayString
  mbgLtNgPtpAvail INTEGER

MbgLtNgSysPsTableEntry  
SEQUENCE    
  mbgLtNgSysPsIndex Unsigned32
  mbgLtNgSysPsStatus INTEGER

MbgLtNgSysFanTableEntry  
SEQUENCE    
  mbgLtNgSysFanIndex Unsigned32
  mbgLtNgSysFanStatus INTEGER
  mbgLtNgSysFanError INTEGER

MbgLtNgClusterTableEntry  
SEQUENCE    
  mbgLtNgClusterIndex Unsigned32
  mbgLtNgClusterCommunicationIp DisplayString
  mbgLtNgClusterPortState INTEGER
  mbgLtNgClusterMasterSerial DisplayString
  mbgLtNgClusterMasterIp DisplayString
  mbgLtNgClusterMasterPriority Unsigned32
  mbgLtNgClusterClockClass INTEGER
  mbgLtNgClusterClockStatus INTEGER
  mbgLtNgClusterReconfigurationState INTEGER
  mbgLtNgClusterIsFalseticker INTEGER

MbgLtNgEthPortLinkTableEntry  
SEQUENCE    
  mbgLtNgEthPortLinkIndex Unsigned32
  mbgLtNgEthPortLinkState INTEGER

MbgLtNgCfgPhysicalIfTableEntry  
SEQUENCE    
  mbgLtNgCfgPhysicalIfIndex Unsigned32
  mbgLtNgCfgPhysicalIfMac DisplayString
  mbgLtNgCfgPhysicalIfNetLinkMode INTEGER
  mbgLtNgCfgPhysicalIfIndicateLink MeinbergSwitch
  mbgLtNgCfgPhysicalIfBondingGroup Unsigned32
  mbgLtNgCfgPhysicalIfIpv6Mode INTEGER

MbgLtNgCfgVirtualIfTableEntry  
SEQUENCE    
  mbgLtNgCfgVirtualIfIndex Unsigned32
  mbgLtNgCfgVirtualIfIpv4Addr DisplayString
  mbgLtNgCfgVirtualIfIpv4Netmask DisplayString
  mbgLtNgCfgVirtualIfIpv4Dhcp MeinbergSwitch
  mbgLtNgCfgVirtualIfIpv4AddrFromDhcp DisplayString
  mbgLtNgCfgVirtualIfIpv4NetmaskFromDhcp DisplayString
  mbgLtNgCfgVirtualIfIpv4BroadcastFromDhcp DisplayString
  mbgLtNgCfgVirtualIfIpv4GatewayFromDhcp DisplayString
  mbgLtNgCfgVirtualIfIpv4DnsFromDhcp DisplayString
  mbgLtNgCfgVirtualIfIpv4DomainFromDhcp DisplayString
  mbgLtNgCfgVirtualIfIpv6Addr DisplayString
  mbgLtNgCfgVirtualIfIpv6Dhcp MeinbergSwitch
  mbgLtNgCfgVirtualIfIpv6RoutAdd DisplayString
  mbgLtNgCfgVirtualIfIpv6LinkLocal DisplayString
  mbgLtNgCfgVirtualIfAssigned Unsigned32
  mbgLtNgCfgVirtualIfMac DisplayString
  mbgLtNgCfgVirtualIfLabel DisplayString
  mbgLtNgCfgVirtualIfVlan MeinbergSwitch
  mbgLtNgCfgVirtualIfVlanTag Unsigned32
  mbgLtNgCfgVirtualIfVlanPrio Unsigned32
  mbgLtNgCfgVirtualIfCluster MeinbergSwitch
  mbgLtNgCfgVirtualIfClusterIpv4Addr DisplayString
  mbgLtNgCfgVirtualIfClusterIpv4Netmask DisplayString
  mbgLtNgCfgVirtualIfClusterPrio Unsigned32
  mbgLtNgCfgVirtualIfServiceNtp MeinbergSwitch
  mbgLtNgCfgVirtualIfServiceHttp MeinbergSwitch
  mbgLtNgCfgVirtualIfServiceHttps MeinbergSwitch
  mbgLtNgCfgVirtualIfServiceTelnet MeinbergSwitch
  mbgLtNgCfgVirtualIfServiceSsh MeinbergSwitch
  mbgLtNgCfgVirtualIfServiceSnmp MeinbergSwitch
  mbgLtNgCfgVirtualIfServiceFtp MeinbergSwitch
  mbgLtNgCfgVirtualIfServiceTime MeinbergSwitch
  mbgLtNgCfgVirtualIfServiceDaytime MeinbergSwitch
  mbgLtNgCfgVirtualIfServiceFpc MeinbergSwitch

MbgLtNgCfgSnmpTrapRecTableEntry  
SEQUENCE    
  mbgLtNgCfgSnmpTrapRecIndex Unsigned32
  mbgLtNgCfgSnmpTrapRecAddr DisplayString
  mbgLtNgCfgSnmpTrapRecCommunity DisplayString
  mbgLtNgCfgSnmpTrapRecVersion INTEGER

MbgLtNgCfgNtpTableEntry  
SEQUENCE    
  mbgLtNgCfgNtpIndex Unsigned32
  mbgLtNgCfgNtpServerIP DisplayString
  mbgLtNgCfgNtpServerKey Unsigned32
  mbgLtNgCfgNtpServerAutokey MeinbergSwitch
  mbgLtNgCfgNtpServerMinpoll Unsigned32
  mbgLtNgCfgNtpServerMaxpoll Unsigned32
  mbgLtNgCfgNtpServerIburst MeinbergSwitch

MbgLtNgCfgNtpBMTableEntry  
SEQUENCE    
  mbgLtNgCfgNtpBMIndex Unsigned32
  mbgLtNgCfgNtpBroadAddr DisplayString
  mbgLtNgCfgNtpBroadSymKey Unsigned32
  mbgLtNgCfgNtpBroadInterval Unsigned32
  mbgLtNgCfgNtpBroadUseAutokey MeinbergSwitch

MbgLtNgCfgPtpTableEntry  
SEQUENCE    
  mbgLtNgCfgPtpIndex Unsigned32
  mbgLtNgCfgPtpHostname DisplayString
  mbgLtNgCfgPtpDomainname DisplayString
  mbgLtNgCfgPtpNameserver1 DisplayString
  mbgLtNgCfgPtpNameserver2 DisplayString
  mbgLtNgCfgPtpIpv4 DisplayString
  mbgLtNgCfgPtpNetmask DisplayString
  mbgLtNgCfgPtpGateway DisplayString
  mbgLtNgCfgPtpEnableVlan MeinbergSwitch
  mbgLtNgCfgPtpVlanId Unsigned32
  mbgLtNgCfgPtpVlanPriority Unsigned32
  mbgLtNgCfgPtpEnableDhcp MeinbergSwitch
  mbgLtNgCfgPtpMode INTEGER
  mbgLtNgCfgPtpDelayMechanism INTEGER
  mbgLtNgCfgPtpNetworkProtocol INTEGER
  mbgLtNgCfgPtpDomainNumber Unsigned32
  mbgLtNgCfgPtpPriority1 Unsigned32
  mbgLtNgCfgPtpPriority2 Unsigned32
  mbgLtNgCfgPtpSyncInterval Integer32
  mbgLtNgCfgPtpAnnounceInterval Integer32
  mbgLtNgCfgPtpDelayReqInterval Integer32
  mbgLtNgCfgPtpTimescale INTEGER
  mbgLtNgCfgPtpIpv6Avail INTEGER
  mbgLtNgCfgPtpIpv6Mode INTEGER
  mbgLtNgCfgPtpIpv6Address DisplayString
  mbgLtNgCfgPtpIpv6McastScope INTEGER
  mbgLtNgCfgPtpDisableSsh INTEGER
  mbgLtNgCfgPtpDscpClass Unsigned32
  mbgLtNgCfgPtpMcastTtl Unsigned32
  mbgLtNgCfgPtpOpMode INTEGER
  mbgLtNgCfgPtpProfile INTEGER
  mbgLtNgCfgPtpHybridMode MeinbergSwitch
  mbgLtNgCfgPtpUcastMstAddr DisplayString
  mbgLtNgCfgPtpAnnRcptTmout Unsigned32
  mbgLtNgCfgPtpMessageDuration Unsigned32
  mbgLtNgCfgPtpSyncEAvail INTEGER
  mbgLtNgCfgPtpSyncEEnabled INTEGER
  mbgLtNgCfgPtpSyncEQltLvlSelEnable INTEGER
  mbgLtNgCfgPtpSyncESdhNwOption INTEGER
  mbgLtNgCfgPtpSyncEInputSsm INTEGER
  mbgLtNgCfgPtpSyncEOutputSsm INTEGER
  mbgLtNgCfgPtpSyncEGbitCopperMode INTEGER
  mbgLtNgCfgPtpMiscEnable1Step INTEGER
  mbgLtNgCfgPtpDisableMgmtMsgs INTEGER
  mbgLtNgCfgPtpOutput1 INTEGER
  mbgLtNgCfgPtpOutput2 INTEGER

Defined Values

mbgLantimeNG 1.3.6.1.4.1.5597.30
Meinberg LANTIME SNMP Management Information Base
MODULE-IDENTITY    

mbgLantimeNGStatus 1.3.6.1.4.1.5597.30.0
OBJECT IDENTIFIER    

mbgLtNgInfo 1.3.6.1.4.1.5597.30.0.0
OBJECT IDENTIFIER    

mbgLtNgSnmpSubagentVersion 1.3.6.1.4.1.5597.30.0.0.1
version of this SNMP subagent
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgFirmwareVersion 1.3.6.1.4.1.5597.30.0.0.2
installed LANTIME firmware version
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgSerialNumber 1.3.6.1.4.1.5597.30.0.0.3
LANTIME serial number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgSubagentTimeticks 1.3.6.1.4.1.5597.30.0.0.4
Subdaemons' time alive in seconds
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mbgLtNgCpuSerialNumber 1.3.6.1.4.1.5597.30.0.0.5
CPU's serial number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgRefclock 1.3.6.1.4.1.5597.30.0.1
OBJECT IDENTIFIER    

mbgLtNgNumberOfRefclocks 1.3.6.1.4.1.5597.30.0.1.1
currently installed number of refclocks
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2  

mbgLtNgRefclockTable 1.3.6.1.4.1.5597.30.0.1.2
a table of refclock related variables
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MbgLtNgRefclockTableEntry

mbgLtNgRefclockTableEntry 1.3.6.1.4.1.5597.30.0.1.2.1
a list of objects pertaining to a refclock
Status: current Access: not-accessible
OBJECT-TYPE    
  MbgLtNgRefclockTableEntry  

mbgLtNgRefclockIndex 1.3.6.1.4.1.5597.30.0.1.2.1.1
index for refclock
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..2  

mbgLtNgRefclockType 1.3.6.1.4.1.5597.30.0.1.2.1.2
type of refclock
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), gps166(1), gps167(2), gps167SV(3), gps167PC(4), gps167PCI(5), gps163(6), gps168PCI(7), gps161(8), gps169PCI(9), tcr167PCI(10), gps164(11), gps170PCI(12), pzf511(13), gps170(14), tcr511(15), am511(16), msf511(17), grc170(18), gps170PEX(19), gps162(20), ptp270PEX(21), frc511PEX(22), gen170(23), tcr170PEX(24), wwvb511(25), mgr170(26), jjy511(27), pzf600(28), tcr600(29), gps180(30), gln170(31), gps180PEX(32), tcr180PEX(33), pzf180PEX(34), mgr180(35), msf600(36), wwvb600(37), jjy600(38), gps180HS(39), gps180AMC(40), esi180(41), cpe180(42), lno180(43), grc180(44), liu(45), dcf600HS(46), dcf600RS(47), mri(48), bpe(49), gln180Pex(50), n2x(51), rsc180(52), lneGb(53), lnePpg180(54), scg(55), mdu300(56), sdi(57), fdm180(58), spt(59), pzf180(60), rel1000(61)  

mbgLtNgRefclockUsage 1.3.6.1.4.1.5597.30.0.1.2.1.3
what this refclock is used for
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), secondary(1), compare(2), primary(3)  

mbgLtNgRefclockState 1.3.6.1.4.1.5597.30.0.1.2.1.4
state of GPS refclock conneted to NTP time server as value 0: not available 1: synchronized 2: not synchronized
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), synchronized(1), notSynchronized(2)  

mbgLtNgRefclockSubstate 1.3.6.1.4.1.5597.30.0.1.2.1.5
more detailed state depending on refclock type 0: no substate available gps: 1-4 long waves (PZF,WWVB,MSF,...): 50-52 (not supported by all types) irig: 100-101
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER mrsRefNone(-1), notAvailable(0), gpsSync(1), gpsTracking(2), gpsAntennaDisconnected(3), gpsWarmBoot(4), gpsColdBoot(5), gpsAntennaShortCircuit(6), lwNeverSync(50), lwNotSync(51), lwSync(52), tcrNotSync(100), tcrSync(101), mrsGpsSync(150), mrs10MhzSync(151), mrsPpsInSync(152), mrs10MhzPpsInSync(153), mrsIrigSync(154), mrsNtpSync(155), mrsPtpIeee1588Sync(156), mrsPtpOverE1Sync(157), mrsFixedFreqInSync(158), mrsPpsStringSync(159), mrsVarFreqGpioSync(160), mrsReserved(161), mrsDcf77PzfSync(162), mrsLongwaveSync(163), mrsGlonassGpsSync(164), mrsHavequickSync(165), mrsExtOscSync(166), mrsIntOscSync(167)  

mbgLtNgRefclockStatusA 1.3.6.1.4.1.5597.30.0.1.2.1.6
status A depending on reflcock gps : indicates number of good satellites in view long wave - pzf : correlation - other : not supported irig : not supported
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

mbgLtNgRefclockMaxStatusA 1.3.6.1.4.1.5597.30.0.1.2.1.7
maximum status A depending on reflcock gps : indicates number of satellites in view long wave - pzf : 100 - other : not supported irig : not supported
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

mbgLtNgRefclockStatusB 1.3.6.1.4.1.5597.30.0.1.2.1.8
maximum status B depending on reflcock gps : not supported long wave - all : field strength irig : not supported
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

mbgLtNgRefclockMaxStatusB 1.3.6.1.4.1.5597.30.0.1.2.1.9
maximum status B depending on reflcock gps : not supported long wave - all : 100 irig : not supported
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

mbgLtNgRefclockAdditionalInfo 1.3.6.1.4.1.5597.30.0.1.2.1.10
any kind of additional information concerning a refclock
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), leapSecondAnnounced(1)  

mbgLtNgRefclockLeapSecondDate 1.3.6.1.4.1.5597.30.0.1.2.1.11
Date for next leap second
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgRefclockGpsTable 1.3.6.1.4.1.5597.30.0.1.3
a table of gps only related variables
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MbgLtNgRefclockGpsTableEntry

mbgLtNgRefclockGpsTableEntry 1.3.6.1.4.1.5597.30.0.1.3.1
a list of objects pertaining to a GPS refclock
Status: current Access: not-accessible
OBJECT-TYPE    
  MbgLtNgRefclockGpsTableEntry  

mbgLtNgRefclockGpsIndex 1.3.6.1.4.1.5597.30.0.1.3.1.1
index for GPS
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

mbgLtNgRefclockGpsLatitude 1.3.6.1.4.1.5597.30.0.1.3.1.2
GPS' latitude
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgRefclockGpsLongitude 1.3.6.1.4.1.5597.30.0.1.3.1.3
GPS' longitude
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgRefclockGpsAltitude 1.3.6.1.4.1.5597.30.0.1.3.1.4
GPS' altitude
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mbgLtNgRefclockGpsTdop 1.3.6.1.4.1.5597.30.0.1.3.1.5
GPS' timing dillution of precision
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgRefclockGpsPdop 1.3.6.1.4.1.5597.30.0.1.3.1.6
GPS' positional dillution of precision
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgRefclockGpsUtcOffset 1.3.6.1.4.1.5597.30.0.1.3.1.7
GPS' offset to UTC in seconds
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mbgLtNgRefclockTimeDiff 1.3.6.1.4.1.5597.30.0.1.4
when there is more than one refclock this object shows the internal time difference in milliseconds
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mbgLtNgRefclockGpsPos 1.3.6.1.4.1.5597.30.0.1.5
shows current GPS receiver position
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgNtp 1.3.6.1.4.1.5597.30.0.2
OBJECT IDENTIFIER    

mbgLtNgNtpCurrentState 1.3.6.1.4.1.5597.30.0.2.1
Current NTP's synchronization status
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), notSynchronized(1), synchronized(2)  

mbgLtNgNtpStratum 1.3.6.1.4.1.5597.30.0.2.2
Stratum value of the NTP
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..16  

mbgLtNgNtpRefclockName 1.3.6.1.4.1.5597.30.0.2.3
Name of the current refclock selected by the NTP
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgNtpRefclockOffset 1.3.6.1.4.1.5597.30.0.2.4
Time offset between the current selected refclock and time of NTP as string in milliseconds
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgNtpVersion 1.3.6.1.4.1.5597.30.0.2.5
integrated NTP version
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgNtpClientCounter 1.3.6.1.4.1.5597.30.0.2.8
OBJECT IDENTIFIER    

mbgLtNgNtpCCStartedAt 1.3.6.1.4.1.5597.30.0.2.8.1
start time of current NTP client counter session as timestamp
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mbgLtNgNtpCCDuration 1.3.6.1.4.1.5597.30.0.2.8.2
total duration of NTP client counter in seconds
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mbgLtNgNtpCCNumberOfClients 1.3.6.1.4.1.5597.30.0.2.8.3
total number of different clients requesting time
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mbgLtNgNtpCCTotalRequests 1.3.6.1.4.1.5597.30.0.2.8.4
total requests since starting the daemon
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mbgLtNgNtpCCTotalRequestsCurrentDay 1.3.6.1.4.1.5597.30.0.2.8.5
today's total requests
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mbgLtNgNtpCCTotalRequestsLastHour 1.3.6.1.4.1.5597.30.0.2.8.6
today's requests within the last completed hour
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mbgLtNgNtpCCTotalRequestsLastMinute 1.3.6.1.4.1.5597.30.0.2.8.7
today's requests within the last completed minute
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mbgLtNgNtpCCTodaysClients 1.3.6.1.4.1.5597.30.0.2.8.8
today's number of different clients requesting time
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mbgLtNgNtpMrs 1.3.6.1.4.1.5597.30.0.2.9
OBJECT IDENTIFIER    

mbgLtNgNtpMrsServer 1.3.6.1.4.1.5597.30.0.2.9.1
external NTP server being used for synchronization
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgNtpMrsOffset 1.3.6.1.4.1.5597.30.0.2.9.2
external NTP server's offset
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgPtp 1.3.6.1.4.1.5597.30.0.3
OBJECT IDENTIFIER    

mbgLtNgPtpNumberOfModules 1.3.6.1.4.1.5597.30.0.3.1
number of available PTPv2 modules
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mbgLtNgPtpTable 1.3.6.1.4.1.5597.30.0.3.2
a table of PTPv2 related variables
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MbgLtNgPtpTableEntry

mbgLtNgPtpTableEntry 1.3.6.1.4.1.5597.30.0.3.2.1
a list of objects pertaining to a PTPv2 module
Status: current Access: not-accessible
OBJECT-TYPE    
  MbgLtNgPtpTableEntry  

mbgLtNgPtpIndex 1.3.6.1.4.1.5597.30.0.3.2.1.1
index for PTPv2 module
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

mbgLtNgPtpMode 1.3.6.1.4.1.5597.30.0.3.2.1.2
PTPv2 modus as integer. This object is obsolete and always returns '0'. Please see alternates mbgLtNgPtpPortState and mbgLtNgPtpRole.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), stopped(1), master(2), slave(3), ordinary(4)  

mbgLtNgPtpPortState 1.3.6.1.4.1.5597.30.0.3.2.1.3
port state as integer
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER uninitialized(0), initializing(1), faulty(2), disabled(3), listening(4), preMaster(5), master(6), passive(7), uncalibrated(8), slave(9)  

mbgLtNgPtpGrandmasterMac 1.3.6.1.4.1.5597.30.0.3.2.1.4
MAC address of current grandmaster
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgPtpClockAccuracy 1.3.6.1.4.1.5597.30.0.3.2.1.5
indicates the source of time
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), timeAccurateTo25ns(32), timeAccurateTo100ns(33), timeAccurateTo250ns(34), timeAccurateTo1us(35), timeAccurateTo2Point5us(36), timeAccurateTo10us(37), timeAccurateTo25us(38), timeAccurateTo100us(39), timeAccurateTo250us(40), timeAccurateTo1ms(41), timeAccurateTo2to5ms(42), timeAccurateTo10ms(43), timeAccurateTo25ms(44), timeAccurateTo100ms(45), timeAccurateTo250ms(46), timeAccurateTo1s(47), timeAccurateTo10s(48), timeAccurateToGT10s(49), timeAccurateToUnknown(254)  

mbgLtNgPtpClockClass 1.3.6.1.4.1.5597.30.0.3.2.1.6
denotes the traceability of the time or frequency
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mbgLtNgPtpTimeSource 1.3.6.1.4.1.5597.30.0.3.2.1.7
source of time being used
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), atomicClock(16), gps(32), terrestrialRadio(48), ptp(64), ntp(80), handSet(96), other(144), internalOscillator(160)  

mbgLtNgPtpUtcOffset 1.3.6.1.4.1.5597.30.0.3.2.1.8
offset from PTP's TAI time to UTC time
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mbgLtNgPtpTimeSeconds 1.3.6.1.4.1.5597.30.0.3.2.1.9
PTP seconds
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mbgLtNgPtpTsuTime 1.3.6.1.4.1.5597.30.0.3.2.1.10
current time on PTP TSU
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgPtpSysTime 1.3.6.1.4.1.5597.30.0.3.2.1.11
current system time
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgPtpPortLinkup 1.3.6.1.4.1.5597.30.0.3.2.1.12
PTP port's physical link-up
Status: current Access: read-only
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgPtpOffsetFromGM 1.3.6.1.4.1.5597.30.0.3.2.1.13
offset from grandmaster in nanoseconds
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgPtpPathDelay 1.3.6.1.4.1.5597.30.0.3.2.1.14
network delay in nanoseconds
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgPtpDelayMec 1.3.6.1.4.1.5597.30.0.3.2.1.15
delay mechanism
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER end2End(0), peer2Peer(1)  

mbgLtNgPtpDomain 1.3.6.1.4.1.5597.30.0.3.2.1.16
domain number
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mbgLtNgPtpGrandmasterUuid 1.3.6.1.4.1.5597.30.0.3.2.1.17
grandmaster uuid
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgPtpLocalMac 1.3.6.1.4.1.5597.30.0.3.2.1.18
local MAC address
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgPtpDelayAsymmetry 1.3.6.1.4.1.5597.30.0.3.2.1.19
asymmetric network delay in nanoseconds
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgPtpAvail 1.3.6.1.4.1.5597.30.0.3.2.1.20
Signals whether PTP instance is avail or not
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mbgLtNgFdm 1.3.6.1.4.1.5597.30.0.4
OBJECT IDENTIFIER    

mbgLtNgFdmFreq 1.3.6.1.4.1.5597.30.0.4.1
powerline frequency in mHz; 0 indicates that no data is available
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 45000..65000  

mbgLtNgFdmFreqDev 1.3.6.1.4.1.5597.30.0.4.2
frequency deviation in mHz depending on the configured nominal frequency; check 'mbgLtNgFdmFreq' for error
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -15000..15000  

mbgLtNgFdmNomFreq 1.3.6.1.4.1.5597.30.0.4.3
nominal frequency in mHz; can be 50000 (50Hz) or 60000 (60Hz); 0 indicates that no value is configured
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 50000 | 60000  

mbgLtNgSystemHardware 1.3.6.1.4.1.5597.30.0.5
OBJECT IDENTIFIER    

mbgLtNgSysPowerSupply 1.3.6.1.4.1.5597.30.0.5.0
OBJECT IDENTIFIER    

mbgLtNgSysNumberOfPowerSupplies 1.3.6.1.4.1.5597.30.0.5.0.1
number of available power supplies
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mbgLtNgSysPsTable 1.3.6.1.4.1.5597.30.0.5.0.2
a table of power supply stati
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MbgLtNgSysPsTableEntry

mbgLtNgSysPsTableEntry 1.3.6.1.4.1.5597.30.0.5.0.2.1
a list of objects pertaining to power supplies
Status: current Access: not-accessible
OBJECT-TYPE    
  MbgLtNgSysPsTableEntry  

mbgLtNgSysPsIndex 1.3.6.1.4.1.5597.30.0.5.0.2.1.1
index of power supply
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

mbgLtNgSysPsStatus 1.3.6.1.4.1.5597.30.0.5.0.2.1.2
Status of power supply
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), down(1), up(2)  

mbgLtNgSysFan 1.3.6.1.4.1.5597.30.0.5.1
OBJECT IDENTIFIER    

mbgLtNgSysNumberOfFans 1.3.6.1.4.1.5597.30.0.5.1.1
number of available fans
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mbgLtNgSysFanTable 1.3.6.1.4.1.5597.30.0.5.1.2
a table of power supply stati
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MbgLtNgSysFanTableEntry

mbgLtNgSysFanTableEntry 1.3.6.1.4.1.5597.30.0.5.1.2.1
a list of objects pertaining to fans
Status: current Access: not-accessible
OBJECT-TYPE    
  MbgLtNgSysFanTableEntry  

mbgLtNgSysFanIndex 1.3.6.1.4.1.5597.30.0.5.1.2.1.1
index of fan
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

mbgLtNgSysFanStatus 1.3.6.1.4.1.5597.30.0.5.1.2.1.2
Status of fan
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), off(1), on(2)  

mbgLtNgSysFanError 1.3.6.1.4.1.5597.30.0.5.1.2.1.3
fan's error field
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), no(1), yes(2)  

mbgLtNgSysTemperature 1.3.6.1.4.1.5597.30.0.5.2
OBJECT IDENTIFIER    

mbgLtNgSysTempCelsius 1.3.6.1.4.1.5597.30.0.5.2.1
temperature in degree Celsius
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mbgLtNgCluster 1.3.6.1.4.1.5597.30.0.6
OBJECT IDENTIFIER    

mbgLtNgNumberOfClusters 1.3.6.1.4.1.5597.30.0.6.1
number of active running clusters
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mbgLtNgClusterTable 1.3.6.1.4.1.5597.30.0.6.2
a table of cluster status information
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MbgLtNgClusterTableEntry

mbgLtNgClusterTableEntry 1.3.6.1.4.1.5597.30.0.6.2.1
a list of objects pertaining to running and active clusters
Status: current Access: not-accessible
OBJECT-TYPE    
  MbgLtNgClusterTableEntry  

mbgLtNgClusterIndex 1.3.6.1.4.1.5597.30.0.6.2.1.1
index of power supply
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

mbgLtNgClusterCommunicationIp 1.3.6.1.4.1.5597.30.0.6.2.1.2
ip of cluster interface
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgClusterPortState 1.3.6.1.4.1.5597.30.0.6.2.1.3
state of cluster
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), master(1), slave(2), listening(3)  

mbgLtNgClusterMasterSerial 1.3.6.1.4.1.5597.30.0.6.2.1.4
serial number of cluster's master
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgClusterMasterIp 1.3.6.1.4.1.5597.30.0.6.2.1.5
ip address of cluster's master
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgClusterMasterPriority 1.3.6.1.4.1.5597.30.0.6.2.1.6
priority of cluster master
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mbgLtNgClusterClockClass 1.3.6.1.4.1.5597.30.0.6.2.1.7
reference's clock class
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), gps(3), pzf(4), am(5), irig(6), pps(7), ptp(8), ntp(9), e1(10), rdt(11)  

mbgLtNgClusterClockStatus 1.3.6.1.4.1.5597.30.0.6.2.1.8
reference's clock status
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), normalOperation(1), freeRunningOrTracking(2), antennaFailure(3), invalid(4)  

mbgLtNgClusterReconfigurationState 1.3.6.1.4.1.5597.30.0.6.2.1.9
current reconfiguration state
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), normal(1), masterToSlave(2), slaveToMaster(3)  

mbgLtNgClusterIsFalseticker 1.3.6.1.4.1.5597.30.0.6.2.1.10
am I a falseticker?
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), no(1), yes(2)  

mbgLtNgMisc 1.3.6.1.4.1.5597.30.0.7
OBJECT IDENTIFIER    

mbgLtNgEthPortLinkTable 1.3.6.1.4.1.5597.30.0.7.1
a table of physical ethernet interface port link states
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MbgLtNgEthPortLinkTableEntry

mbgLtNgEthPortLinkTableEntry 1.3.6.1.4.1.5597.30.0.7.1.1
port link states for each physical ethernet interface
Status: current Access: not-accessible
OBJECT-TYPE    
  MbgLtNgEthPortLinkTableEntry  

mbgLtNgEthPortLinkIndex 1.3.6.1.4.1.5597.30.0.7.1.1.1
interface index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

mbgLtNgEthPortLinkState 1.3.6.1.4.1.5597.30.0.7.1.1.2
link state
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(0), up(1)  

mbgLtNgConfig 1.3.6.1.4.1.5597.30.1
OBJECT IDENTIFIER    

mbgLtNgCfgEthernet 1.3.6.1.4.1.5597.30.1.0
OBJECT IDENTIFIER    

mbgLtNgCfgEthernetHostname 1.3.6.1.4.1.5597.30.1.0.1
devices' hostname
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgEthernetDomain 1.3.6.1.4.1.5597.30.1.0.2
devices' domain membership
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgEthernetNameserver1 1.3.6.1.4.1.5597.30.1.0.3
first nameserver's ip address
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgEthernetNameserver2 1.3.6.1.4.1.5597.30.1.0.4
second nameserver's ip address
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgEthernetIpv4Gateway 1.3.6.1.4.1.5597.30.1.0.5
device's ethernet ipv4 gateway
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgEthernetIpv6Gateway 1.3.6.1.4.1.5597.30.1.0.6
device's ethernet ipv6 gateway
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgNumberOfPhysicalIf 1.3.6.1.4.1.5597.30.1.0.7
number of virtual interfaces interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mbgLtNgCfgNumberOfVirtualIf 1.3.6.1.4.1.5597.30.1.0.8
number of virtual interfaces interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mbgLtNgCfgPhysicalIfTable 1.3.6.1.4.1.5597.30.1.0.9
a table of service stati for the ethernet interfaces
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MbgLtNgCfgPhysicalIfTableEntry

mbgLtNgCfgPhysicalIfTableEntry 1.3.6.1.4.1.5597.30.1.0.9.1
a list of objects pertaining to a mrs input reference
Status: current Access: not-accessible
OBJECT-TYPE    
  MbgLtNgCfgPhysicalIfTableEntry  

mbgLtNgCfgPhysicalIfIndex 1.3.6.1.4.1.5597.30.1.0.9.1.1
specifies the physical interface index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

mbgLtNgCfgPhysicalIfMac 1.3.6.1.4.1.5597.30.1.0.9.1.2
interface's physical MAC address
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgPhysicalIfNetLinkMode 1.3.6.1.4.1.5597.30.1.0.9.1.3
interface's net link mode; hd = half-duplex; fd = full-duplex
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), hd10Mbit(1), fd10Mbit(2), hd100Mbit(3), fd100Mbit(4), hd1000Mbit(5), fd1000Mbit(6)  


mbgLtNgCfgPhysicalIfBondingGroup 1.3.6.1.4.1.5597.30.1.0.9.1.5
assign interface to bonding group; '0' means not assigned
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..5  

mbgLtNgCfgPhysicalIfIpv6Mode 1.3.6.1.4.1.5597.30.1.0.9.1.6
enable IPv6 mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deactivated(0), activated(1), activatedWithAutoconf(2)  

mbgLtNgCfgVirtualIfTable 1.3.6.1.4.1.5597.30.1.0.10
a table of service stati for the ethernet interfaces
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MbgLtNgCfgVirtualIfTableEntry

mbgLtNgCfgVirtualIfTableEntry 1.3.6.1.4.1.5597.30.1.0.10.1
a list of objects pertaining to a mrs input reference
Status: current Access: not-accessible
OBJECT-TYPE    
  MbgLtNgCfgVirtualIfTableEntry  

mbgLtNgCfgVirtualIfIndex 1.3.6.1.4.1.5597.30.1.0.10.1.1
specifies the virtual interface index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

mbgLtNgCfgVirtualIfIpv4Addr 1.3.6.1.4.1.5597.30.1.0.10.1.2
interfaces' ipv4 address
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVirtualIfIpv4Netmask 1.3.6.1.4.1.5597.30.1.0.10.1.3
interfaces' ipv4 netmask
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVirtualIfIpv4Dhcp 1.3.6.1.4.1.5597.30.1.0.10.1.4
interface uses ipv4 dhcp?
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgVirtualIfIpv4AddrFromDhcp 1.3.6.1.4.1.5597.30.1.0.10.1.5
interfaces' ipv4 address received from dhcp
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVirtualIfIpv4NetmaskFromDhcp 1.3.6.1.4.1.5597.30.1.0.10.1.6
interfaces' ipv4 netmask received from dhcp
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVirtualIfIpv4BroadcastFromDhcp 1.3.6.1.4.1.5597.30.1.0.10.1.7
interfaces' ipv4 broadcast received from dhcp
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVirtualIfIpv4GatewayFromDhcp 1.3.6.1.4.1.5597.30.1.0.10.1.8
interfaces' ipv4 gateway received from dhcp
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVirtualIfIpv4DnsFromDhcp 1.3.6.1.4.1.5597.30.1.0.10.1.9
interfaces' ipv4 dns server received from dhcp
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVirtualIfIpv4DomainFromDhcp 1.3.6.1.4.1.5597.30.1.0.10.1.10
interfaces' ipv4 dns server received from dhcp
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVirtualIfIpv6Addr 1.3.6.1.4.1.5597.30.1.0.10.1.11
interfaces' ipv6 address
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVirtualIfIpv6Dhcp 1.3.6.1.4.1.5597.30.1.0.10.1.12
interfaces uses ipv6 dhcp
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgVirtualIfIpv6RoutAdd 1.3.6.1.4.1.5597.30.1.0.10.1.13
interfaces' router advertisement ipv6 address
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVirtualIfIpv6LinkLocal 1.3.6.1.4.1.5597.30.1.0.10.1.14
interfaces' ipv6 link local address
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVirtualIfAssigned 1.3.6.1.4.1.5597.30.1.0.10.1.15
mapping to the physical interface this virtual one is assigned to
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

mbgLtNgCfgVirtualIfMac 1.3.6.1.4.1.5597.30.1.0.10.1.16
MAC-address of this virtual interface
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVirtualIfLabel 1.3.6.1.4.1.5597.30.1.0.10.1.17
user description for this label (like an alias)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVirtualIfVlan 1.3.6.1.4.1.5597.30.1.0.10.1.18
is vlan enabled
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgVirtualIfVlanTag 1.3.6.1.4.1.5597.30.1.0.10.1.19
vlan tag
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4094  

mbgLtNgCfgVirtualIfVlanPrio 1.3.6.1.4.1.5597.30.1.0.10.1.20
vlan priority
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

mbgLtNgCfgVirtualIfCluster 1.3.6.1.4.1.5597.30.1.0.10.1.21
is cluster mode enabled
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgVirtualIfClusterIpv4Addr 1.3.6.1.4.1.5597.30.1.0.10.1.22
ipv4 cluster address
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVirtualIfClusterIpv4Netmask 1.3.6.1.4.1.5597.30.1.0.10.1.23
cluster ipv4 netmask
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVirtualIfClusterPrio 1.3.6.1.4.1.5597.30.1.0.10.1.24
cluster priority
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..10  

mbgLtNgCfgVirtualIfServiceNtp 1.3.6.1.4.1.5597.30.1.0.10.1.25
is ntp active on this interface
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgVirtualIfServiceHttp 1.3.6.1.4.1.5597.30.1.0.10.1.26
is http active on this interface
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgVirtualIfServiceHttps 1.3.6.1.4.1.5597.30.1.0.10.1.27
is https active on this interface
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgVirtualIfServiceTelnet 1.3.6.1.4.1.5597.30.1.0.10.1.28
is telnet active on this interface
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgVirtualIfServiceSsh 1.3.6.1.4.1.5597.30.1.0.10.1.29
is ssh active on this interface
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgVirtualIfServiceSnmp 1.3.6.1.4.1.5597.30.1.0.10.1.30
is snmp active on this interface
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgVirtualIfServiceFtp 1.3.6.1.4.1.5597.30.1.0.10.1.31
is ftp active on this interface
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgVirtualIfServiceTime 1.3.6.1.4.1.5597.30.1.0.10.1.32
is time active on this interface
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgVirtualIfServiceDaytime 1.3.6.1.4.1.5597.30.1.0.10.1.33
is daytime active on this interface
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgVirtualIfServiceFpc 1.3.6.1.4.1.5597.30.1.0.10.1.34
is fpc active on this interface
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgEthernetGenClusterPort 1.3.6.1.4.1.5597.30.1.0.11
general cluster port
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

mbgLtNgCfgEthernetGenClusterIp 1.3.6.1.4.1.5597.30.1.0.12
general multicast cluster address
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgNotifications 1.3.6.1.4.1.5597.30.1.1
OBJECT IDENTIFIER    

mbgLtNgCfgSyslog 1.3.6.1.4.1.5597.30.1.1.0
OBJECT IDENTIFIER    

mbgLtNgCfgSyslogServerAddr 1.3.6.1.4.1.5597.30.1.1.0.1
comma separated string of all configured syslog servers; use such a list to set syslog servers
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgSyslogLoglevel 1.3.6.1.4.1.5597.30.1.1.0.2
loglevel for syslog server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6)  

mbgLtNgCfgEmail 1.3.6.1.4.1.5597.30.1.1.1
OBJECT IDENTIFIER    

mbgLtNgCfgEmailTo 1.3.6.1.4.1.5597.30.1.1.1.1
email address to send alerts etc. to (receiving address)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgEmailFrom 1.3.6.1.4.1.5597.30.1.1.1.2
email address to send alerts etc. from (sending address)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgEmailSmarthostAddr 1.3.6.1.4.1.5597.30.1.1.1.3
SMTP smarthost used to send mail (ip or hostname)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgEmailSmarthostPort 1.3.6.1.4.1.5597.30.1.1.1.4
SMTP smarthost listenning port
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

mbgLtNgCfgEmailSmarthostAuth 1.3.6.1.4.1.5597.30.1.1.1.5
use authentication for smarthost
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgEmailSmarthostAuthUser 1.3.6.1.4.1.5597.30.1.1.1.6
user to authenticate at smarthost
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgEmailSmarthostAuthPw 1.3.6.1.4.1.5597.30.1.1.1.7
password to authenticate user at smarthost
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgWinpopup 1.3.6.1.4.1.5597.30.1.1.2
OBJECT IDENTIFIER    

mbgLtNgCfgWmailAddress1 1.3.6.1.4.1.5597.30.1.1.2.1
first windows popup alert receiver (ip or hostname)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgWmailAddress2 1.3.6.1.4.1.5597.30.1.1.2.2
second windows popup alert receiver (ip or hostname)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgSNMP 1.3.6.1.4.1.5597.30.1.1.3
OBJECT IDENTIFIER    

mbgLtNgCfgSnmpTrapRecTable 1.3.6.1.4.1.5597.30.1.1.3.1
a table of SNMP trap receiver information
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MbgLtNgCfgSnmpTrapRecTableEntry

mbgLtNgCfgSnmpTrapRecTableEntry 1.3.6.1.4.1.5597.30.1.1.3.1.1
a list of objects pertaining to an interface and concerning broad-, multi- and manycast
Status: current Access: not-accessible
OBJECT-TYPE    
  MbgLtNgCfgSnmpTrapRecTableEntry  

mbgLtNgCfgSnmpTrapRecIndex 1.3.6.1.4.1.5597.30.1.1.3.1.1.1
index of different SNMP trap receivers
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4  

mbgLtNgCfgSnmpTrapRecAddr 1.3.6.1.4.1.5597.30.1.1.3.1.1.2
SNMP trap receiver address (ip or hostname)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgSnmpTrapRecCommunity 1.3.6.1.4.1.5597.30.1.1.3.1.1.3
SNMP trap receiver community
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgSnmpTrapRecVersion 1.3.6.1.4.1.5597.30.1.1.3.1.1.4
SNMP trap receiver version
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER v1(1), v2c(2), v3(3)  

mbgLtNgCfgSnmpReadCommunity 1.3.6.1.4.1.5597.30.1.1.3.2
read community for SNMPv1 and SNMPv2c
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgSnmpWriteCommunity 1.3.6.1.4.1.5597.30.1.1.3.3
read community for SNMPv1 and SNMPv2c
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgSnmpContact 1.3.6.1.4.1.5597.30.1.1.3.4
SNMP contact string for Lantime
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgSnmpLocation 1.3.6.1.4.1.5597.30.1.1.3.5
SNMP location string for Lantime
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgSnmpV3UserName 1.3.6.1.4.1.5597.30.1.1.3.6
username for SNMPv3
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgSnmpV3UserRights 1.3.6.1.4.1.5597.30.1.1.3.7
privacy protocol for SNMPv3
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER readonly(0), readwrite(1)  

mbgLtNgCfgSnmpV3Context 1.3.6.1.4.1.5597.30.1.1.3.8
context string for SNMPv3
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgSnmpV3SecurityLevel 1.3.6.1.4.1.5597.30.1.1.3.9
authentication level for SNMPv3
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noAuthNoPriv(0), authNoPriv(1), authPriv(2)  

mbgLtNgCfgSnmpV3AuthProtocol 1.3.6.1.4.1.5597.30.1.1.3.10
authentication protocol for SNMPv3
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER md5(0), sha(1)  

mbgLtNgCfgSnmpV3AuthPassphrase 1.3.6.1.4.1.5597.30.1.1.3.11
authentication passphrase for SNMPv3
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgSnmpV3PrivProtocol 1.3.6.1.4.1.5597.30.1.1.3.12
privacy protocol for SNMPv3
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER des(0), aes(1)  

mbgLtNgCfgSnmpV3PrivPassphrase 1.3.6.1.4.1.5597.30.1.1.3.13
privacy passphrase for SNMPv3
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgSnmpRetries 1.3.6.1.4.1.5597.30.1.1.3.14
number of retries for sending traps
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

mbgLtNgCfgSnmpTimeout 1.3.6.1.4.1.5597.30.1.1.3.15
timeout for sending traps (in seconds)
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

mbgLtNgCfgSnmpEnabledVersion 1.3.6.1.4.1.5597.30.1.1.3.16
currently enabled SNMP version
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER v1ANDv2c(0), v3only(1), v1ANDv2cANDv3(2)  

mbgLtNgCfgWalldisplay 1.3.6.1.4.1.5597.30.1.1.4
OBJECT IDENTIFIER    

mbgLtNgCfgVP100Display1Addr 1.3.6.1.4.1.5597.30.1.1.4.1
address of wall display (ip or hostname)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVP100Display1SN 1.3.6.1.4.1.5597.30.1.1.4.2
serial number of first VP100 wall display
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVP100Display2Addr 1.3.6.1.4.1.5597.30.1.1.4.3
address of wall display (ip or hostname)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgVP100Display2SN 1.3.6.1.4.1.5597.30.1.1.4.4
serial number of second VP100 wall display
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgNtpClientMonitoring 1.3.6.1.4.1.5597.30.1.1.5
OBJECT IDENTIFIER    

mbgLtNgCfgNtpMaxClientOffset 1.3.6.1.4.1.5597.30.1.1.5.1
max NTP client offset limit in milliseconds
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

mbgLtNgCfgNtpMaxClientStratum 1.3.6.1.4.1.5597.30.1.1.5.2
max NTP client stratum level
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..16  

mbgLtNgCfgTrapTrigger 1.3.6.1.4.1.5597.30.1.1.6
OBJECT IDENTIFIER    

mbgLtNgCfgTrapNormalOperation 1.3.6.1.4.1.5597.30.1.1.6.1
string containing signaling information ( comma-separated ); use the following aliases to set params: Email -> email Wmail -> wmail Snmp -> snmp VP100 -> disp User -> own Alarm -> led Relay -> relais Following string is perfectly valid to enable signaling for SNMP and Email: 'snmp,email'. Please note that some objects do not suppurt relay and led but this is announced at each MIB object itself. This object, for example, does not support them.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapNtpNotSync 1.3.6.1.4.1.5597.30.1.1.6.2
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapNtpSync 1.3.6.1.4.1.5597.30.1.1.6.3
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapNtpStopped 1.3.6.1.4.1.5597.30.1.1.6.4
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapServerBoot 1.3.6.1.4.1.5597.30.1.1.6.5
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapRefclockNotResponding 1.3.6.1.4.1.5597.30.1.1.6.6
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapRefclockSynchronized 1.3.6.1.4.1.5597.30.1.1.6.7
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapRefclockNotSynchronized 1.3.6.1.4.1.5597.30.1.1.6.8
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapSecRefclockNotResponding 1.3.6.1.4.1.5597.30.1.1.6.9
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapSecRefclockSynchronized 1.3.6.1.4.1.5597.30.1.1.6.10
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapSecRefclockNotSynchronized 1.3.6.1.4.1.5597.30.1.1.6.11
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapAntennaFaulty 1.3.6.1.4.1.5597.30.1.1.6.12
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapAntennaReconnect 1.3.6.1.4.1.5597.30.1.1.6.13
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapAntennaShortCircuit 1.3.6.1.4.1.5597.30.1.1.6.14
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapConfigChanged 1.3.6.1.4.1.5597.30.1.1.6.15
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapLeapSecAnnounced 1.3.6.1.4.1.5597.30.1.1.6.16
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapNtpClientLimitExceeded 1.3.6.1.4.1.5597.30.1.1.6.17
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapRefSrcLimitExceeded 1.3.6.1.4.1.5597.30.1.1.6.18
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapRefSrcDisconnected 1.3.6.1.4.1.5597.30.1.1.6.19
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapRefSrcReconnected 1.3.6.1.4.1.5597.30.1.1.6.20
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapShsTimeLimitError 1.3.6.1.4.1.5597.30.1.1.6.21
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapShsTimeLimitWarning 1.3.6.1.4.1.5597.30.1.1.6.22
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapNetworkDown 1.3.6.1.4.1.5597.30.1.1.6.23
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapNetworkUp 1.3.6.1.4.1.5597.30.1.1.6.24
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapPowerSupplyUp 1.3.6.1.4.1.5597.30.1.1.6.25
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapPowerSupplyDown 1.3.6.1.4.1.5597.30.1.1.6.26
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapFdmError 1.3.6.1.4.1.5597.30.1.1.6.27
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapLowSystemResources 1.3.6.1.4.1.5597.30.1.1.6.28
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapPtpNetworkDown 1.3.6.1.4.1.5597.30.1.1.6.29
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapPtpNetworkUp 1.3.6.1.4.1.5597.30.1.1.6.30
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapPtpStateChanged 1.3.6.1.4.1.5597.30.1.1.6.31
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapPtpError 1.3.6.1.4.1.5597.30.1.1.6.32
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapFanDown 1.3.6.1.4.1.5597.30.1.1.6.33
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapFanUp 1.3.6.1.4.1.5597.30.1.1.6.34
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgRepeatEvent 1.3.6.1.4.1.5597.30.1.1.6.35
when to send last error trap message again
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER never(0), everyMinute(1), everyHour(2), everyDay(3)  

mbgLtNgCfgRepetitions 1.3.6.1.4.1.5597.30.1.1.6.36
how often do you want to resend an error trap
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50  

mbgLtNgCfgTrapWarmedUp 1.3.6.1.4.1.5597.30.1.1.6.37
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgTrapNotWarmedUp 1.3.6.1.4.1.5597.30.1.1.6.38
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgSecurity 1.3.6.1.4.1.5597.30.1.2
OBJECT IDENTIFIER    

mbgLtNgCfgLoginAccess 1.3.6.1.4.1.5597.30.1.2.0
OBJECT IDENTIFIER    

mbgLtNgCfgDisableRootLogin 1.3.6.1.4.1.5597.30.1.2.0.1
do not allow user 'root' to login
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgAllowNetworkDiscovery 1.3.6.1.4.1.5597.30.1.2.0.2
allow LANTIME to be discovered via network mdns
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgFrontPanel 1.3.6.1.4.1.5597.30.1.2.1
OBJECT IDENTIFIER    

mbgLtNgCfgLockFrontPanel 1.3.6.1.4.1.5597.30.1.2.1.1
do not allow usage of the front panel
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgDisableUsbPort 1.3.6.1.4.1.5597.30.1.2.1.2
do not allow usage of front USB port
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgSsh 1.3.6.1.4.1.5597.30.1.2.2
OBJECT IDENTIFIER    

mbgLtNgCfgSshKeyLength 1.3.6.1.4.1.5597.30.1.2.2.1
ssh key length in bits
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 768 | 1024 | 2048 | 4096 | 8192 | 16384 | 32768  

mbgLtNgCfgSshShellTimeout 1.3.6.1.4.1.5597.30.1.2.2.2
ssh shell timeout in seconds
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 60 | 120 | 300 | 600 | 3600 | 10800 | 18000 | 86400  

mbgLtNgCfgNtp 1.3.6.1.4.1.5597.30.1.3
OBJECT IDENTIFIER    

mbgLtNgCfgNtpTable 1.3.6.1.4.1.5597.30.1.3.1
a table of configured, external NTP servers
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MbgLtNgCfgNtpTableEntry

mbgLtNgCfgNtpTableEntry 1.3.6.1.4.1.5597.30.1.3.1.1
a list of objects pertaining to a configured,external NTP server
Status: current Access: not-accessible
OBJECT-TYPE    
  MbgLtNgCfgNtpTableEntry  

mbgLtNgCfgNtpIndex 1.3.6.1.4.1.5597.30.1.3.1.1.1
index (and no.) of external NTP server
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..7  

mbgLtNgCfgNtpServerIP 1.3.6.1.4.1.5597.30.1.3.1.1.2
ip address for external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgNtpServerKey 1.3.6.1.4.1.5597.30.1.3.1.1.3
key for external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mbgLtNgCfgNtpServerAutokey 1.3.6.1.4.1.5597.30.1.3.1.1.4
is autokey enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgNtpServerMinpoll 1.3.6.1.4.1.5597.30.1.3.1.1.5
is autokey enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 4..10  

mbgLtNgCfgNtpServerMaxpoll 1.3.6.1.4.1.5597.30.1.3.1.1.6
is autokey enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 4..10  

mbgLtNgCfgNtpServerIburst 1.3.6.1.4.1.5597.30.1.3.1.1.7
is autokey enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgNtpBMTable 1.3.6.1.4.1.5597.30.1.3.2
a table of configured, external NTP servers
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MbgLtNgCfgNtpBMTableEntry

mbgLtNgCfgNtpBMTableEntry 1.3.6.1.4.1.5597.30.1.3.2.1
a list of objects pertaining to an interface and concerning broad-, multi- and manycast
Status: current Access: not-accessible
OBJECT-TYPE    
  MbgLtNgCfgNtpBMTableEntry  

mbgLtNgCfgNtpBMIndex 1.3.6.1.4.1.5597.30.1.3.2.1.1
index of interface concerning different NTP modes
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..16  

mbgLtNgCfgNtpBroadAddr 1.3.6.1.4.1.5597.30.1.3.2.1.2
address for NTP broadcast mode
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgNtpBroadSymKey 1.3.6.1.4.1.5597.30.1.3.2.1.3
symmetric key number for broadcast
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..10  

mbgLtNgCfgNtpBroadInterval 1.3.6.1.4.1.5597.30.1.3.2.1.4
NTP broadcast interval on specific interval
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..10  

mbgLtNgCfgNtpBroadUseAutokey 1.3.6.1.4.1.5597.30.1.3.2.1.5
use autokey for broadcast
Status: current Access: read-only
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgNtpEnableMulticast 1.3.6.1.4.1.5597.30.1.3.3
enable or disable multicast mode
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgNtpMultiAddr 1.3.6.1.4.1.5597.30.1.3.4
address for NTP multicast mode
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgNtpMultiInterval 1.3.6.1.4.1.5597.30.1.3.5
NTP multicast interval on specific interval
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

mbgLtNgCfgNtpMultiSymKey 1.3.6.1.4.1.5597.30.1.3.6
symmetric key number for multicast
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

mbgLtNgCfgNtpMultiUseAutokey 1.3.6.1.4.1.5597.30.1.3.7
use autokey for multicast
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgNtpEnableManycast 1.3.6.1.4.1.5597.30.1.3.8
enable or disable manycast mode for this interface
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgNtpManyAddr 1.3.6.1.4.1.5597.30.1.3.9
address for NTP manycast mode
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgNtpManySymKey 1.3.6.1.4.1.5597.30.1.3.11
symmetric key number for manycast
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

mbgLtNgCfgNtpManyUseAutokey 1.3.6.1.4.1.5597.30.1.3.12
use autokey for manycast
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgNtpLocalClkStratum 1.3.6.1.4.1.5597.30.1.3.13
stratum of local clock
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..16  

mbgLtNgCfgNtpDisableLocalClk 1.3.6.1.4.1.5597.30.1.3.14
disable local clock
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgNtpSpoofLocalTime 1.3.6.1.4.1.5597.30.1.3.15
NTP outputs local time instead of UTC; see mbgLtNgCfgNtpTimeScale
Status: obsolete Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgNtpLocalTrustedKeys 1.3.6.1.4.1.5597.30.1.3.16
local trusted key
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgNtpTrusttime 1.3.6.1.4.1.5597.30.1.3.17
accept async reference clock for this amount of time in seconds
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

mbgLtNgCfgNtpTimeScale 1.3.6.1.4.1.5597.30.1.3.18
timescale
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER utc(0), local(1)  

mbgLtNgCfgNtpEnableClientCounter 1.3.6.1.4.1.5597.30.1.3.19
enable NTP request client counting
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgNtpEnableClientCounterDuration 1.3.6.1.4.1.5597.30.1.3.20
NTP client counter duration in seconds; 0 means continuously
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

mbgLtNgCfgPtp 1.3.6.1.4.1.5597.30.1.4
OBJECT IDENTIFIER    

mbgLtNgCfgPtpTable 1.3.6.1.4.1.5597.30.1.4.1
a table of PTPv2 related configurtion variables
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MbgLtNgCfgPtpTableEntry

mbgLtNgCfgPtpTableEntry 1.3.6.1.4.1.5597.30.1.4.1.1
a list of configuration objects pertaining to a PTPv2 module
Status: current Access: not-accessible
OBJECT-TYPE    
  MbgLtNgCfgPtpTableEntry  

mbgLtNgCfgPtpIndex 1.3.6.1.4.1.5597.30.1.4.1.1.1
index for PTPv2 module
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

mbgLtNgCfgPtpHostname 1.3.6.1.4.1.5597.30.1.4.1.1.2
network hostname
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgPtpDomainname 1.3.6.1.4.1.5597.30.1.4.1.1.3
network domain
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgPtpNameserver1 1.3.6.1.4.1.5597.30.1.4.1.1.4
ethernet nameserver for hostname resolving
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgPtpNameserver2 1.3.6.1.4.1.5597.30.1.4.1.1.5
ethernet nameserver for hostname resolving
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgPtpIpv4 1.3.6.1.4.1.5597.30.1.4.1.1.6
ip address
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgPtpNetmask 1.3.6.1.4.1.5597.30.1.4.1.1.7
netmask
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgPtpGateway 1.3.6.1.4.1.5597.30.1.4.1.1.8
default gateway
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgPtpEnableVlan 1.3.6.1.4.1.5597.30.1.4.1.1.9
Enable VLAN if it is supported
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgPtpVlanId 1.3.6.1.4.1.5597.30.1.4.1.1.10
VLAN id ranges from 0-4096
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4094  

mbgLtNgCfgPtpVlanPriority 1.3.6.1.4.1.5597.30.1.4.1.1.11
VLAN priority ranges from 0-7
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

mbgLtNgCfgPtpEnableDhcp 1.3.6.1.4.1.5597.30.1.4.1.1.12
Enable DCHP for PTPv2 module
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgPtpIpv6Avail 1.3.6.1.4.1.5597.30.1.4.1.1.23
Is IPv6 supported?
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mbgLtNgCfgPtpIpv6Mode 1.3.6.1.4.1.5597.30.1.4.1.1.24
IPv6 addressing mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER static(0), ra(1), dhcp(2)  

mbgLtNgCfgPtpIpv6Address 1.3.6.1.4.1.5597.30.1.4.1.1.25
IPv6 address if supported, else n/a
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgPtpIpv6McastScope 1.3.6.1.4.1.5597.30.1.4.1.1.26
Multicast scope. See RFC 7346 and RFC 4291
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER intfLocal(1), linkLocal(2), realmLocal(3), adminLocal(4), siteLocal(5), orgaLocal(8), globalScope(14)  

mbgLtNgCfgPtpDisableSsh 1.3.6.1.4.1.5597.30.1.4.1.1.27
Disable SSH for PTP port
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgPtpDscpClass 1.3.6.1.4.1.5597.30.1.4.1.1.28
DSCP classification value ranges from 0-64
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..64  

mbgLtNgCfgPtpMcastTtl 1.3.6.1.4.1.5597.30.1.4.1.1.29
Multicast TTL value ranges from 0-255
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mbgLtNgCfgPtpMode 1.3.6.1.4.1.5597.30.1.4.1.1.13
PTP mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER multicastSlave(0), unicastSlave(1), multicastMaster(2), unicastMaster(3), multicastAuto(4), bothMaster(5), ntpServer(6), ntpClient(7)  

mbgLtNgCfgPtpDelayMechanism 1.3.6.1.4.1.5597.30.1.4.1.1.14
how to calculate delay mechanism
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER e2e(0), p2p(1)  

mbgLtNgCfgPtpNetworkProtocol 1.3.6.1.4.1.5597.30.1.4.1.1.15
how to calculate delay mechanism
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reserved(0), udpIpv4(1), udpIpv6(2), ieee8023(3)  

mbgLtNgCfgPtpDomainNumber 1.3.6.1.4.1.5597.30.1.4.1.1.16
ptp domain membership
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mbgLtNgCfgPtpPriority1 1.3.6.1.4.1.5597.30.1.4.1.1.17
ptp user defined major priority
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mbgLtNgCfgPtpPriority2 1.3.6.1.4.1.5597.30.1.4.1.1.18
ptp user defined minor priority
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mbgLtNgCfgPtpSyncInterval 1.3.6.1.4.1.5597.30.1.4.1.1.19
value is defined as power of 2; for example: 2 = one message every 4 seconds, -2 = 4 messages every second
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -7..7  

mbgLtNgCfgPtpAnnounceInterval 1.3.6.1.4.1.5597.30.1.4.1.1.20
see 'mbgLtNgCfPtpSyncInterval' for explanation
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -7..7  

mbgLtNgCfgPtpDelayReqInterval 1.3.6.1.4.1.5597.30.1.4.1.1.21
see 'mbgLtNgCfPtpSyncInterval' for explanation
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -7..7  

mbgLtNgCfgPtpTimescale 1.3.6.1.4.1.5597.30.1.4.1.1.22
see 'mbgLtNgCfPtpSyncInterval' for explanation
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER arbitrary(0), ptp(1)  

mbgLtNgCfgPtpOpMode 1.3.6.1.4.1.5597.30.1.4.1.1.30
General PTP operation mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ptp(0), ntp(1)  

mbgLtNgCfgPtpProfile 1.3.6.1.4.1.5597.30.1.4.1.1.31
PTP profile
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER custom(0), defE2eIeee15882008(1), defP2pIeee15882008(2), powIeeeC37238(3), telItuTG82651(4), telItuTG82751(5), smpteSt20592(6)  

mbgLtNgCfgPtpHybridMode 1.3.6.1.4.1.5597.30.1.4.1.1.32
Run card in hybrid mode
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgPtpUcastMstAddr 1.3.6.1.4.1.5597.30.1.4.1.1.33
IP address of unicast master when in slave mode. Only 1!!! is shown and can be set.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgCfgPtpAnnRcptTmout 1.3.6.1.4.1.5597.30.1.4.1.1.34
Timeout for announce messages
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 2..255  

mbgLtNgCfgPtpMessageDuration 1.3.6.1.4.1.5597.30.1.4.1.1.35
Time period until master stops sending messages [s]
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..65535  

mbgLtNgCfgPtpSyncEAvail 1.3.6.1.4.1.5597.30.1.4.1.1.36
Is SyncE supported?
Status: current Access: read-only
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgPtpSyncEEnabled 1.3.6.1.4.1.5597.30.1.4.1.1.37
Is Sync-E enabled if supported?
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgPtpSyncEQltLvlSelEnable 1.3.6.1.4.1.5597.30.1.4.1.1.38
Enable quality selection?
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgPtpSyncESdhNwOption 1.3.6.1.4.1.5597.30.1.4.1.1.39
Sdh network option
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER opt1(0), opt2(1)  

mbgLtNgCfgPtpSyncEInputSsm 1.3.6.1.4.1.5597.30.1.4.1.1.40
Input SSMs combied for both options. You should be aware of using which code when.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER stuUkn(0), prs(1), prc(2), inv3(3), ssuATnc(4), inv5(5), inv6(6), st2(7), ssuB(8), inv9(9), eec2St3(10), eec1Sec(11), smc(12), st3e(13), prov(14), dnuDus(15)  

mbgLtNgCfgPtpSyncEOutputSsm 1.3.6.1.4.1.5597.30.1.4.1.1.41
Input SSMs combined for both options. You should be aware of using which code when.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER stuUkn(0), prs(1), prc(2), inv3(3), ssuATnc(4), inv5(5), inv6(6), st2(7), ssuB(8), inv9(9), eec2St3(10), eec1Sec(11), smc(12), st3e(13), prov(14), dnuDus(15)  

mbgLtNgCfgPtpSyncEGbitCopperMode 1.3.6.1.4.1.5597.30.1.4.1.1.42
Gigabit copper modes
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), forceSyncEAuto(1), forceOrIsMaster(2), forceOrIsSlave(3), preferMaster(4), preferSlave(5)  

mbgLtNgCfgPtpMiscEnable1Step 1.3.6.1.4.1.5597.30.1.4.1.1.43
Enable PTP 1 step if supported
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgPtpDisableMgmtMsgs 1.3.6.1.4.1.5597.30.1.4.1.1.44
Disable management messages if suppported
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgPtpOutput1 1.3.6.1.4.1.5597.30.1.4.1.1.45
Additional I/O output if suppported
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), pps(1), mhz10(2), khzGPS2048(3), mhzGPS10(4), ppsGPS(5)  

mbgLtNgCfgPtpOutput2 1.3.6.1.4.1.5597.30.1.4.1.1.46
Additional I/O output if suppported
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), pps(1), mhz10(2), khzGPS2048(3), mhzGPS10(4), ppsGPS(5)  

mbgLtNgCfgPtpCmd 1.3.6.1.4.1.5597.30.1.4.2
Configuration commands
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), configure(1), reset(2), apply(3)  

mbgLtNgCfgSystem 1.3.6.1.4.1.5597.30.1.5
OBJECT IDENTIFIER    

mbgLtNgCfgGeneral 1.3.6.1.4.1.5597.30.1.5.0
OBJECT IDENTIFIER    

mbgLtNgCfgWebLanguage 1.3.6.1.4.1.5597.30.1.5.0.1
set language for web interface
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), englisch(1), german(2)  

mbgLtNgCfgActivateChangesAsStartup 1.3.6.1.4.1.5597.30.1.5.0.2
activate changes automatically as startup configuration
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCfgDisplay 1.3.6.1.4.1.5597.30.1.5.1
OBJECT IDENTIFIER    

mbgLtNgCfgEnableFrontPanelLight 1.3.6.1.4.1.5597.30.1.5.1.1
active light at front panel
Status: current Access: read-write
OBJECT-TYPE    
  MeinbergSwitch  

mbgLtNgCommands 1.3.6.1.4.1.5597.30.2
OBJECT IDENTIFIER    

mbgLtNgCmdExecute 1.3.6.1.4.1.5597.30.2.1
Send a command to the timeserver to be executed; Attention: Command should be executed with a timeout of 120 seconds and 0 retries
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), applyChanges(1), saveChanges(2), saveAndApplyChanges(3), startFirmwareUpdate(4), reboot(5), resendErrorConditions(6), sendTestNotifications(7)  

mbgLtNgCmdSetTime 1.3.6.1.4.1.5597.30.2.2
Reference time can be set via a date-time string in format: yyyy-mm-dd hh:mm:ss Time is interpreted as configured via web interface at menu: 'Receiver'->'Time Zone' It is mandatory to unplug the receiver's antenna to make this work. and strongly advised to execute a SNMPSET WITHOUT retries and a timeout value greater than 60 seconds. Otherwise there might come up unforeseen issues. SNMPGET always returns default value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtNgTrapNotifications 1.3.6.1.4.1.5597.30.3
OBJECT IDENTIFIER    

mbgLtNgTraps 1.3.6.1.4.1.5597.30.3.0
OBJECT IDENTIFIER    

mbgLtNgTrapNTPNotSync 1.3.6.1.4.1.5597.30.3.0.1
trap to be sent when NTP is not synchronised
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapNTPStopped 1.3.6.1.4.1.5597.30.3.0.2
trap to be sent when NTP is stopped
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapServerBoot 1.3.6.1.4.1.5597.30.3.0.3
trap to be sent when time server has finished boot sequence
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapReceiverNotResponding 1.3.6.1.4.1.5597.30.3.0.4
trap to be sent when receiver is not responding
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapReceiverNotSync 1.3.6.1.4.1.5597.30.3.0.5
trap to be sent when receiver is not synchronised
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapAntennaFaulty 1.3.6.1.4.1.5597.30.3.0.6
trap to be sent when connection to antenna is broken
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapAntennaReconnect 1.3.6.1.4.1.5597.30.3.0.7
trap to be sent when antenna has been reconnected
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapConfigChanged 1.3.6.1.4.1.5597.30.3.0.8
trap to be sent when timeserver reloaded its configuration
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapLeapSecondAnnounced 1.3.6.1.4.1.5597.30.3.0.9
trap to be sent when a leap second has been announced
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapSHSTimeLimitError 1.3.6.1.4.1.5597.30.3.0.10
trap to be sent when SHS timelimit exceeded
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapSecondaryRecNotSync 1.3.6.1.4.1.5597.30.3.0.11
trap to be sent when secondary receiver in SHS system is not synchronised
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapPowerSupplyFailure 1.3.6.1.4.1.5597.30.3.0.12
trap to be sent when one of the redundant power supplies fails
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapAntennaShortCircuit 1.3.6.1.4.1.5597.30.3.0.13
trap to be sent when a connected antenna fails due to a short circuit
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapReceiverSync 1.3.6.1.4.1.5597.30.3.0.14
trap to be sent when receiver is synchronised
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapNTPClientAlarm 1.3.6.1.4.1.5597.30.3.0.15
trap to be sent when an NTP Client Monitoring alarm occurs, e.g. when a monitored client is not reachable.
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapPowerSupplyUp 1.3.6.1.4.1.5597.30.3.0.16
trap to be sent when a power supply returned to a healthy state.
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapNetworkDown 1.3.6.1.4.1.5597.30.3.0.17
trap to be sent when a monitored network port is down.
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapNetworkUp 1.3.6.1.4.1.5597.30.3.0.18
trap to be sent when a monitored network port is up.
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapSecondaryRecNotResp 1.3.6.1.4.1.5597.30.3.0.19
trap to be sent when secondary receiver is not responding
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapXmrLimitExceeded 1.3.6.1.4.1.5597.30.3.0.30
trap to be sent when a reference offset exceeds the configured limit
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapXmrRefDisconnect 1.3.6.1.4.1.5597.30.3.0.31
trap to be sent when a reference signal has been lost
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapXmrRefReconnect 1.3.6.1.4.1.5597.30.3.0.32
trap to be sent when a reference signal recovered
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapFdmError 1.3.6.1.4.1.5597.30.3.0.33
trap to be sent when the Fdm module generates an alarm
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapSHSTimeLimitWarning 1.3.6.1.4.1.5597.30.3.0.34
trap to be sent when SHS warning limit exceeded
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapSecondaryRecSync 1.3.6.1.4.1.5597.30.3.0.35
trap to be sent when secondary receiver is synchronised
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapNTPSync 1.3.6.1.4.1.5597.30.3.0.36
trap to be sent when NTP is synchronised
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapPtpPortDisconnected 1.3.6.1.4.1.5597.30.3.0.37
trap to be sent when PTP network port got disconnected
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapPtpPortConnected 1.3.6.1.4.1.5597.30.3.0.38
trap to be sent when PTP network port got connected
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapPtpStateChanged 1.3.6.1.4.1.5597.30.3.0.39
trap to be sent when PTP state changed (e.g. from 'passive' to 'master')
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapPtpError 1.3.6.1.4.1.5597.30.3.0.40
trap to be sent when PTP raised an error
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapLowSystemResources 1.3.6.1.4.1.5597.30.3.0.41
trap to be sent when system is running on low resources
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapFanDown 1.3.6.1.4.1.5597.30.3.0.45
trap to be sent when fan goes down
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapFanUp 1.3.6.1.4.1.5597.30.3.0.46
trap to be sent when fan comes up
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapCertificateExpired 1.3.6.1.4.1.5597.30.3.0.47
trap to be sent when certificate expired or will expire
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapSufficientSystemResources 1.3.6.1.4.1.5597.30.3.0.48
trap to be sent when system has regained sufficient resources
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapOscillatorWarmedUp 1.3.6.1.4.1.5597.30.3.0.49
trap to be sent when oscillator is not warmed up
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapOscillatorNotWarmedUp 1.3.6.1.4.1.5597.30.3.0.50
trap to be sent when oscillator is warmed up
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapXmrRefChanged 1.3.6.1.4.1.5597.30.3.0.51
trap to be sent when XMR reference source changed
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapClusterMasterChanged 1.3.6.1.4.1.5597.30.3.0.52
trap to be sent when cluster mode is active and cluster changed
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapClusterFalsetickerDetected 1.3.6.1.4.1.5597.30.3.0.53
trap to be sent when cluster mode is active and a cluster member is dectected as falseticker
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapClusterFalsetickerCleared 1.3.6.1.4.1.5597.30.3.0.54
trap to be sent when cluster mode is active and a cluster member is no longer a falseticker
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapSHSTimeLimitOk 1.3.6.1.4.1.5597.30.3.0.55
trap to be sent when SHS timelimit error has been acknowledged or time difference drops below warning limit.
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapIMSError 1.3.6.1.4.1.5597.30.3.0.56
trap to be sent when an IMS module is not responsive anymore, has got temperature issues, etc. ...
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapIMSOk 1.3.6.1.4.1.5597.30.3.0.57
trap to be sent when an IMS module returns to healthy state.
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapFDMOk 1.3.6.1.4.1.5597.30.3.0.58
trap to be sent when an FDM module returns to healthy state.
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapNTPOffsetLimitExceeded 1.3.6.1.4.1.5597.30.3.0.59
trap to be sent when monitoring an NTP client and its offset limit is exceeded
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapNTPOffsetLimitOk 1.3.6.1.4.1.5597.30.3.0.60
trap to be sent when monitoring an NTP client and its offset limit is back again in a valid range
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapNormalOperation 1.3.6.1.4.1.5597.30.3.0.77
trap to be sent when the system returned to a healthy state
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapHeartbeat 1.3.6.1.4.1.5597.30.3.0.88
trap to be sent periodically to indicate that time server is still alive
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapTestNotification 1.3.6.1.4.1.5597.30.3.0.99
trap to be sent when a test notification has been requested
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtNgTrapMessage 1.3.6.1.4.1.5597.30.3.0.100
used as a payload object for all traps, holds a clear text event message
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNgConformance 1.3.6.1.4.1.5597.30.90
OBJECT IDENTIFIER    

mbgLtNgCompliances 1.3.6.1.4.1.5597.30.90.1
OBJECT IDENTIFIER    

mbgLtNgGroups 1.3.6.1.4.1.5597.30.90.2
OBJECT IDENTIFIER    

mbgLtNgCompliance 1.3.6.1.4.1.5597.30.90.1.1
The compliance statement for SNMP entities which implement version 2 of the LANTIME MIB
Status: current Access: read-only
MODULE-COMPLIANCE    

mbgLtNgObjectsGroup 1.3.6.1.4.1.5597.30.90.2.1
The collection of objects for the LANTIME MIB
Status: current Access: read-only
OBJECT-GROUP    

mbgLtNgTrapsGroup 1.3.6.1.4.1.5597.30.90.2.2
The collection of traps for the LANTIME MIB
Status: current Access: read-only
NOTIFICATION-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor