MBG-SNMP-LT-MIB

File: MBG-SNMP-LT-MIB.mib (119264 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
MBG-SNMP-ROOT-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
NOTIFICATION-TYPE MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP DisplayString mbgSnmpRoot

Defined Values

mbgLantime 1.3.6.1.4.1.5597.3
Meinberg SNMP Management Information Base
MODULE-IDENTITY    

mbgLtInfo 1.3.6.1.4.1.5597.3.0
OBJECT IDENTIFIER    

mbgLtFirmwareVersion 1.3.6.1.4.1.5597.3.0.1
shows the installed firmware version of your LANTIME
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtFirmwareVersionVal 1.3.6.1.4.1.5597.3.0.2
shows the installed firmware version of your LANTIME as an Integer32 value
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtNtp 1.3.6.1.4.1.5597.3.1
OBJECT IDENTIFIER    

mbgLtNtpCurrentState 1.3.6.1.4.1.5597.3.1.1
actual state of the NTP as string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNtpCurrentStateVal 1.3.6.1.4.1.5597.3.1.2
current state of the NTP as Integer32 value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notSynchronized(0), noGoodRefclock(1), syncToExtRefclock(2), syncToSerialRefclock(3), normalOperationPPS(4), normalOperationRefclock(5), unknown(99)  

mbgLtNtpStratum 1.3.6.1.4.1.5597.3.1.3
Stratum value of the NTP
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtNtpActiveRefclockId 1.3.6.1.4.1.5597.3.1.4
Index of the current refclock selected by the NTP
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER localClock(0), serialRefclock(1), pps(2), externalRefclock(3), notSync(99)  

mbgLtNtpActiveRefclockName 1.3.6.1.4.1.5597.3.1.5
Name of the current refclock selected by the NTP
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNtpActiveRefclockOffset 1.3.6.1.4.1.5597.3.1.6
Time offset between the current selected refclock and time of NTP as string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtNtpActiveRefclockOffsetVal 1.3.6.1.4.1.5597.3.1.7
Time offset in micro seconds between the current selected refclock and time of NTP
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtNtpNumberOfRefclocks 1.3.6.1.4.1.5597.3.1.8
Number of refclocks configured in the NTP
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtNtpAuthKeyId 1.3.6.1.4.1.5597.3.1.9
Authentication Key ID of active refclock is active
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtNtpVersion 1.3.6.1.4.1.5597.3.1.10
integrated NTP version
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefclock 1.3.6.1.4.1.5597.3.2
OBJECT IDENTIFIER    

mbgLtRefClockType 1.3.6.1.4.1.5597.3.2.1
Type of refclock connected to NTP time server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefClockTypeVal 1.3.6.1.4.1.5597.3.2.2
Type of refclock connected to NTP time server as value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notavailable(0), mbgGPS167(1), mbgGPS167BGTTGP(2), mbgPZF509(3), mbgPZF509BGTTGP(4), mbgSHS(5), mbgSHSBGT(6), mbgSHSFRC(7), mbgSHSFRCBGT(8), mbgTCR509(9), mbgTCR509BGTTGP(10), mbgRDT(11), mbgRDTBGTTGP(12), mbgEDT(13), mbgEDTBGTTGP(14), mbgAHS(15), mbgDHS(16), mbgNDT167(17), mbgNDT167BGT(18), mbgDCT(19), mbgDCTBGT(20), mbgSHSTCR(21), mbgSHSTCRBGT(22)  

mbgLtRefClockMode 1.3.6.1.4.1.5597.3.2.3
current mode of refclock connected to NTP time server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefClockModeVal 1.3.6.1.4.1.5597.3.2.4
current mode of refclock connected to NTP time server as value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notavailable(0), normalOperation(1), trackingSearching(2), antennaFaulty(3), warmBoot(4), coldBoot(5), antennaShortcircuit(6)  

mbgLtRefGpsState 1.3.6.1.4.1.5597.3.2.5
current State of GPS refclock conneted to NTP time server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefGpsStateVal 1.3.6.1.4.1.5597.3.2.6
current State of GPS refclock conneted to NTP time server as value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notavailable(0), synchronized(1), notsynchronized(2)  

mbgLtRefGpsPosition 1.3.6.1.4.1.5597.3.2.7
current Position of GPS refclock conneted to NTP time server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefGpsSatellites 1.3.6.1.4.1.5597.3.2.8
current Satellites in view and good of GPS refclock connected to NTP time server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefGpsSatellitesGood 1.3.6.1.4.1.5597.3.2.9
current good Satellites of GPS refclock connected to NTP time server as value
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtRefGpsSatellitesInView 1.3.6.1.4.1.5597.3.2.10
current Satellites in view of GPS refclock conneted to NTP time server as value
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtRefPzfState 1.3.6.1.4.1.5597.3.2.11
current State of DCF77/PZF refclock connected to NTP time server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefPzfStateVal 1.3.6.1.4.1.5597.3.2.12
current State of DCF77/PZF refclock connected to NTP time server as value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notavailable(0), sync(1), notsyncnow(2), neversynced(3)  

mbgLtRefPzfKorrelation 1.3.6.1.4.1.5597.3.2.13
current Korrelation of DCF77/PZF refclock connected to NTP time server
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

mbgLtRefPzfField 1.3.6.1.4.1.5597.3.2.14
current strength of field of DCF77/PZF refclock connected to NTP time server
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtRefGpsMode 1.3.6.1.4.1.5597.3.2.15
current Mode of GPS refclock connected to NTP time server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefGpsModeVal 1.3.6.1.4.1.5597.3.2.16
current Mode of GPS refclock connected to NTP time server as value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notavailable(0), normalOperation(1), trackingSearching(2), antennaFaulty(3), warmBoot(4), coldBoot(5), antennaShortcircuit(6)  

mbgLtRefIrigMode 1.3.6.1.4.1.5597.3.2.17
current Mode of IRIG refclock conneted to NTP time server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefIrigModeVal 1.3.6.1.4.1.5597.3.2.18
current Mode of IRIG refclock conneted to NTP time server as value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notavailable(0), locked(1), notlocked(2), telegramError(3)  

mbgLtRefPzfMode 1.3.6.1.4.1.5597.3.2.19
current Mode of PZF refclock connected to NTP time server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefPzfModeVal 1.3.6.1.4.1.5597.3.2.20
current Mode of PZF refclock connected to NTP time server as value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notavailable(0), normalOperation(1), antennaFaulty(2)  

mbgLtRefIrigState 1.3.6.1.4.1.5597.3.2.21
current State of IRIG refclock connected to NTP time server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefIrigStateVal 1.3.6.1.4.1.5597.3.2.22
current State of IRIG refclock connected to NTP time server as value
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtRefSHSMode 1.3.6.1.4.1.5597.3.2.23
current Mode of SHS system connected to NTP time server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefSHSModeVal 1.3.6.1.4.1.5597.3.2.24
current Mode of SHS system connected to NTP time server as value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notavailable(0), normalOperation(1), stoppedTimeLimitError(2)  

mbgLtRefSHSTimeDiff 1.3.6.1.4.1.5597.3.2.25
current time difference between the two SHS reference time sources in miliseconds
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtRefDctState 1.3.6.1.4.1.5597.3.2.26
current State of DCF77 refclock connected to NTP time server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefDctStateVal 1.3.6.1.4.1.5597.3.2.27
current State of DCF77 refclock connected to NTP time server as value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notavailable(0), sync(1), notsyncnow(2), neversynced(3)  

mbgLtRefDctField 1.3.6.1.4.1.5597.3.2.28
current strength of field of DCF77 refclock connected to NTP time server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefDctMode 1.3.6.1.4.1.5597.3.2.29
current Mode of DCF77 refclock connected to NTP time server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefDctModeVal 1.3.6.1.4.1.5597.3.2.30
current Mode of DCF77 refclock connected to NTP time server as value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notavailable(0), normalOperation(1), antennaFaulty(2)  

mbgLtRefGpsLeapSecond 1.3.6.1.4.1.5597.3.2.31
Date and Time of leap second announcement received via GPS
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefGpsLeapCorrection 1.3.6.1.4.1.5597.3.2.32
Leap Second Correction received via GPS
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mbgLtMrs 1.3.6.1.4.1.5597.3.2.50
OBJECT IDENTIFIER    

mbgLtRefMrsRef 1.3.6.1.4.1.5597.3.2.50.1
ID of currently active reference source as a string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefMrsRefVal 1.3.6.1.4.1.5597.3.2.50.2
currently active reference as a value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notavailable(0), refGps(1), refIrig(2), refPps(3), refFreq(4), refPtp(5), refNtp(6), refFreeRun(99)  

mbgLtRefMrsRefList 1.3.6.1.4.1.5597.3.2.50.3
List of all supported MRS references in a comma separated list
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtRefMrsPrioList 1.3.6.1.4.1.5597.3.2.50.4
List of all active MRS references in a comma separated list sorted by priority
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtMrsRef 1.3.6.1.4.1.5597.3.2.50.10
OBJECT IDENTIFIER    

mbgLtMrsRefGps 1.3.6.1.4.1.5597.3.2.50.10.1
OBJECT IDENTIFIER    

mbgLtMrsGpsOffs 1.3.6.1.4.1.5597.3.2.50.10.1.1
Offset of this reference to the currently active reference, unit included in the string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtMrsGpsOffsVal 1.3.6.1.4.1.5597.3.2.50.10.1.2
Offset of this reference to the currently active reference, unit see below
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mbgLtMrsGpsOffsBase 1.3.6.1.4.1.5597.3.2.50.10.1.3
base of the offset value shown in mbgLtMrsGpsOffsVal
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9)  

mbgLtMrsGpsPrio 1.3.6.1.4.1.5597.3.2.50.10.1.4
the configured priority of this reference
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mbgLtMrsGpsState 1.3.6.1.4.1.5597.3.2.50.10.1.5
the current status of this reference as a string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtMrsGpsStateVal 1.3.6.1.4.1.5597.3.2.50.10.1.6
the current status of this reference as an Integer value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7)  

mbgLtMrsGpsPrecision 1.3.6.1.4.1.5597.3.2.50.10.1.7
Precision Factor of this reference in nanoseconds
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mbgLtMrsRefIrig 1.3.6.1.4.1.5597.3.2.50.10.2
OBJECT IDENTIFIER    

mbgLtMrsIrigOffs 1.3.6.1.4.1.5597.3.2.50.10.2.1
Offset of this reference to the currently active reference, unit included in the string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtMrsIrigOffsVal 1.3.6.1.4.1.5597.3.2.50.10.2.2
Offset of this reference to the currently active reference, unit see below
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mbgLtMrsIrigOffsBase 1.3.6.1.4.1.5597.3.2.50.10.2.3
base of the offset value shown in mbgLtMrsIrigOffsVal
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9)  

mbgLtMrsIrigPrio 1.3.6.1.4.1.5597.3.2.50.10.2.4
the configured priority of this reference
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mbgLtMrsIrigState 1.3.6.1.4.1.5597.3.2.50.10.2.5
the current status of this reference as a string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtMrsIrigStateVal 1.3.6.1.4.1.5597.3.2.50.10.2.6
the current status of this reference as an Integer value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7)  

mbgLtMrsIrigCorr 1.3.6.1.4.1.5597.3.2.50.10.2.7
Correction Value (Fixed Offset) of this reference in nanoseconds
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mbgLtMrsIrigOffsLimit 1.3.6.1.4.1.5597.3.2.50.10.2.8
Offset Limit in nanoseconds, if exceeded this will trigger a notification
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mbgLtMrsIrigPrecision 1.3.6.1.4.1.5597.3.2.50.10.2.9
Precision Factor of this reference in nanoseconds
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mbgLtMrsRefPps 1.3.6.1.4.1.5597.3.2.50.10.3
OBJECT IDENTIFIER    

mbgLtMrsPpsOffs 1.3.6.1.4.1.5597.3.2.50.10.3.1
Offset of this reference to the currently active reference, unit included in the string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtMrsPpsOffsVal 1.3.6.1.4.1.5597.3.2.50.10.3.2
Offset of this reference to the currently active reference, unit see below
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mbgLtMrsPpsOffsBase 1.3.6.1.4.1.5597.3.2.50.10.3.3
base of the offset value shown in mbgLtMrsPpsOffsVal
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9)  

mbgLtMrsPpsPrio 1.3.6.1.4.1.5597.3.2.50.10.3.4
the configured priority of this reference
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mbgLtMrsPpsState 1.3.6.1.4.1.5597.3.2.50.10.3.5
the current status of this reference as a string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtMrsPpsStateVal 1.3.6.1.4.1.5597.3.2.50.10.3.6
the current status of this reference as an Integer value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7)  

mbgLtMrsPpsCorr 1.3.6.1.4.1.5597.3.2.50.10.3.7
Correction Value (Fixed Offset) of this reference in nanoseconds
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mbgLtMrsPpsOffsLimit 1.3.6.1.4.1.5597.3.2.50.10.3.8
Offset Limit in nanoseconds, if exceeded this will trigger a notification
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mbgLtMrsPpsPrecision 1.3.6.1.4.1.5597.3.2.50.10.3.9
Precision Factor of this reference in nanoseconds
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mbgLtMrsRefFreq 1.3.6.1.4.1.5597.3.2.50.10.4
OBJECT IDENTIFIER    

mbgLtMrsFreqOffs 1.3.6.1.4.1.5597.3.2.50.10.4.1
Offset of this reference to the currently active reference, unit included in the string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtMrsFreqOffsVal 1.3.6.1.4.1.5597.3.2.50.10.4.2
Offset of this reference to the currently active reference, unit see below
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mbgLtMrsFreqOffsBase 1.3.6.1.4.1.5597.3.2.50.10.4.3
base of the offset value shown in mbgLtMrsFreqOffsVal
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9)  

mbgLtMrsFreqPrio 1.3.6.1.4.1.5597.3.2.50.10.4.4
the configured priority of this reference
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mbgLtMrsFreqState 1.3.6.1.4.1.5597.3.2.50.10.4.5
the current status of this reference as a string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtMrsFreqStateVal 1.3.6.1.4.1.5597.3.2.50.10.4.6
the current status of this reference as an Integer value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7)  

mbgLtMrsFreqCorr 1.3.6.1.4.1.5597.3.2.50.10.4.7
Correction Value (Fixed Offset) of this reference in nanoseconds
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mbgLtMrsFreqOffsLimit 1.3.6.1.4.1.5597.3.2.50.10.4.8
Offset Limit in nanoseconds, if exceeded this will trigger a notification
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mbgLtMrsFreqPrecision 1.3.6.1.4.1.5597.3.2.50.10.4.9
Precision Factor of this reference in nanoseconds
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mbgLtMrsRefPtp 1.3.6.1.4.1.5597.3.2.50.10.5
OBJECT IDENTIFIER    

mbgLtMrsPtpOffs 1.3.6.1.4.1.5597.3.2.50.10.5.1
Offset of this reference to the currently active reference, unit included in the string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtMrsPtpOffsVal 1.3.6.1.4.1.5597.3.2.50.10.5.2
Offset of this reference to the currently active reference, unit see below
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mbgLtMrsPtpOffsBase 1.3.6.1.4.1.5597.3.2.50.10.5.3
base of the offset value shown in mbgLtMrsPtpOffsVal
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9)  

mbgLtMrsPtpPrio 1.3.6.1.4.1.5597.3.2.50.10.5.4
the configured priority of this reference
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mbgLtMrsPtpState 1.3.6.1.4.1.5597.3.2.50.10.5.5
the current status of this reference as a string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtMrsPtpStateVal 1.3.6.1.4.1.5597.3.2.50.10.5.6
the current status of this reference as an Integer value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7)  

mbgLtMrsPtpCorr 1.3.6.1.4.1.5597.3.2.50.10.5.7
Correction Value (Fixed Offset) of this reference in nanoseconds
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mbgLtMrsPtpOffsLimit 1.3.6.1.4.1.5597.3.2.50.10.5.8
Offset Limit in nanoseconds, if exceeded this will trigger a notification
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mbgLtMrsPtpPrecision 1.3.6.1.4.1.5597.3.2.50.10.5.9
Precision Factor of this reference in nanoseconds
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mbgLtMrsRefNtp 1.3.6.1.4.1.5597.3.2.50.10.6
OBJECT IDENTIFIER    

mbgLtMrsNtpOffs 1.3.6.1.4.1.5597.3.2.50.10.6.1
Offset of this reference to the currently active reference, unit included in the string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtMrsNtpOffsVal 1.3.6.1.4.1.5597.3.2.50.10.6.2
Offset of this reference to the currently active reference, unit see below
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mbgLtMrsNtpOffsBase 1.3.6.1.4.1.5597.3.2.50.10.6.3
base of the offset value shown in mbgLtMrsNtpOffsVal
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9)  

mbgLtMrsNtpPrio 1.3.6.1.4.1.5597.3.2.50.10.6.4
the configured priority of this reference
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mbgLtMrsNtpState 1.3.6.1.4.1.5597.3.2.50.10.6.5
the current status of this reference as a string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtMrsNtpStateVal 1.3.6.1.4.1.5597.3.2.50.10.6.6
the current status of this reference as an Integer value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7)  

mbgLtMrsNtpCorr 1.3.6.1.4.1.5597.3.2.50.10.6.7
Correction Value (Fixed Offset) of this reference in nanoseconds
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mbgLtMrsNtpOffsLimit 1.3.6.1.4.1.5597.3.2.50.10.6.8
Offset Limit in nanoseconds, if exceeded this will trigger a notification
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mbgLtMrsNtpPrecision 1.3.6.1.4.1.5597.3.2.50.10.6.9
Precision Factor of this reference in nanoseconds
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mbgLtNotifications 1.3.6.1.4.1.5597.3.3
OBJECT IDENTIFIER    

mbgLtTraps 1.3.6.1.4.1.5597.3.3.0
OBJECT IDENTIFIER    

mbgLtTrapNTPNotSync 1.3.6.1.4.1.5597.3.3.0.1
trap to be sent when NTP is not synchronised
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapNTPStopped 1.3.6.1.4.1.5597.3.3.0.2
trap to be sent when NTP is stopped
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapServerBoot 1.3.6.1.4.1.5597.3.3.0.3
trap to be sent when time server has finished boot sequence
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapReceiverNotResponding 1.3.6.1.4.1.5597.3.3.0.4
trap to be sent when receiver is not responding
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapReceiverNotSync 1.3.6.1.4.1.5597.3.3.0.5
trap to be sent when receiver is not synchronised
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapAntennaFaulty 1.3.6.1.4.1.5597.3.3.0.6
trap to be sent when connection to antenna is broken
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapAntennaReconnect 1.3.6.1.4.1.5597.3.3.0.7
trap to be sent when antenna has been reconnected
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapConfigChanged 1.3.6.1.4.1.5597.3.3.0.8
trap to be sent when timeserver reloaded its configuration
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapLeapSecondAnnounced 1.3.6.1.4.1.5597.3.3.0.9
trap to be sent when a leap second has been announced
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapSHSTimeLimitError 1.3.6.1.4.1.5597.3.3.0.10
trap to be sent when SHS timelimit exceeded
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapSecondaryRecNotSync 1.3.6.1.4.1.5597.3.3.0.11
trap to be sent when secondary receiver in SHS system is not synchronised
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapPowerSupplyFailure 1.3.6.1.4.1.5597.3.3.0.12
trap to be sent when one of the redundant power supplies fails
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapAntennaShortCircuit 1.3.6.1.4.1.5597.3.3.0.13
trap to be sent when a connected antenna fails due to a short circuit
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapReceiverSync 1.3.6.1.4.1.5597.3.3.0.14
trap to be sent when receiver is synchronised
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapNTPClientAlarm 1.3.6.1.4.1.5597.3.3.0.15
trap to be sent when an NTP Client Monitoring alarm occurs, e.g. when a monitored client is not reachable.
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapPowerSupplyUp 1.3.6.1.4.1.5597.3.3.0.16
trap to be sent when a power supply returned to a healthy state.
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapNetworkDown 1.3.6.1.4.1.5597.3.3.0.17
trap to be sent when a monitored network port is down.
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapNetworkUp 1.3.6.1.4.1.5597.3.3.0.18
trap to be sent when a monitored network port is up.
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapSecondaryRecNotResp 1.3.6.1.4.1.5597.3.3.0.19
trap to be sent when secondary receiver is not responding
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapXmrLimitExceeded 1.3.6.1.4.1.5597.3.3.0.30
trap to be sent when a reference offset exceeds the configured limit
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapXmrRefDisconnect 1.3.6.1.4.1.5597.3.3.0.31
trap to be sent when a reference signal has been lost
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapXmrRefReconnect 1.3.6.1.4.1.5597.3.3.0.32
trap to be sent when a reference signal recovered
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapFdmError 1.3.6.1.4.1.5597.3.3.0.33
trap to be sent when the Fdm module generates an alarm
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapSHSTimeLimitWarning 1.3.6.1.4.1.5597.3.3.0.34
trap to be sent when SHS warning limit exceeded
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapSecondaryRecSync 1.3.6.1.4.1.5597.3.3.0.35
trap to be sent when secondary receiver is synchronised
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapNTPSync 1.3.6.1.4.1.5597.3.3.0.36
trap to be sent when NTP is synchronised
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapPtpPortDisconnected 1.3.6.1.4.1.5597.3.3.0.37
trap to be sent when PTP network port got disconnected
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapPtpPortConnected 1.3.6.1.4.1.5597.3.3.0.38
trap to be sent when PTP network port got connected
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapPtpStateChanged 1.3.6.1.4.1.5597.3.3.0.39
trap to be sent when PTP state changed (e.g. from 'passive' to 'master')
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapPtpError 1.3.6.1.4.1.5597.3.3.0.40
trap to be sent when PTP raised an error
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapNormalOperation 1.3.6.1.4.1.5597.3.3.0.77
trap to be sent when the system returned to a healthy state
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapHeartbeat 1.3.6.1.4.1.5597.3.3.0.88
trap to be sent periodically to indicate that time server is still alive
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapTestNotification 1.3.6.1.4.1.5597.3.3.0.99
trap to be sent when a test notification has been requested
Status: current Access: read-write
NOTIFICATION-TYPE    

mbgLtTrapMessage 1.3.6.1.4.1.5597.3.3.0.100
used as a payload object for all traps, holds a clear text event message
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtCfg 1.3.6.1.4.1.5597.3.4
OBJECT IDENTIFIER    

mbgLtCfgNetwork 1.3.6.1.4.1.5597.3.4.1
OBJECT IDENTIFIER    

mbgLtCfgHostname 1.3.6.1.4.1.5597.3.4.1.1
The hostname configured for this LANTIME
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgDomainname 1.3.6.1.4.1.5597.3.4.1.2
The domainname configured for this LANTIME
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNameserver1 1.3.6.1.4.1.5597.3.4.1.3
The first nameserver used by this LANTIME
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNameserver2 1.3.6.1.4.1.5597.3.4.1.4
The second nameserver used this LANTIME
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgSyslogserver1 1.3.6.1.4.1.5597.3.4.1.5
The first syslog server we are sending log entries to
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgSyslogserver2 1.3.6.1.4.1.5597.3.4.1.6
The second syslog server we are sending log entries to
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgTelnetAccess 1.3.6.1.4.1.5597.3.4.1.7
Is telnet administration enabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgFTPAccess 1.3.6.1.4.1.5597.3.4.1.8
Is FTP administration enabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgHTTPAccess 1.3.6.1.4.1.5597.3.4.1.9
Is web based administration enabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgHTTPSAccess 1.3.6.1.4.1.5597.3.4.1.10
Is secure web based administration enabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgSNMPAccess 1.3.6.1.4.1.5597.3.4.1.11
Is SNMP administration enabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgSambaAccess 1.3.6.1.4.1.5597.3.4.1.12
Is Samba administration enabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgIPv6Access 1.3.6.1.4.1.5597.3.4.1.13
Is IPv6 support enabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgSSHAccess 1.3.6.1.4.1.5597.3.4.1.14
Is SSH administration enabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTP 1.3.6.1.4.1.5597.3.4.2
OBJECT IDENTIFIER    

mbgLtCfgNTPServer1 1.3.6.1.4.1.5597.3.4.2.1
OBJECT IDENTIFIER    

mbgLtCfgNTPServer2 1.3.6.1.4.1.5597.3.4.2.2
OBJECT IDENTIFIER    

mbgLtCfgNTPServer3 1.3.6.1.4.1.5597.3.4.2.3
OBJECT IDENTIFIER    

mbgLtCfgNTPServer4 1.3.6.1.4.1.5597.3.4.2.4
OBJECT IDENTIFIER    

mbgLtCfgNTPServer5 1.3.6.1.4.1.5597.3.4.2.5
OBJECT IDENTIFIER    

mbgLtCfgNTPServer6 1.3.6.1.4.1.5597.3.4.2.6
OBJECT IDENTIFIER    

mbgLtCfgNTPServer7 1.3.6.1.4.1.5597.3.4.2.7
OBJECT IDENTIFIER    

mbgLtCfgNTPServer1IP 1.3.6.1.4.1.5597.3.4.2.1.1
IP address for external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNTPServer1Key 1.3.6.1.4.1.5597.3.4.2.1.2
Key for external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtCfgNTPServer1Autokey 1.3.6.1.4.1.5597.3.4.2.1.3
Is autokey enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTPServer1Prefer 1.3.6.1.4.1.5597.3.4.2.1.4
Is the preferred flag enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTPServer2IP 1.3.6.1.4.1.5597.3.4.2.2.1
IP address for external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNTPServer2Key 1.3.6.1.4.1.5597.3.4.2.2.2
Key for external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtCfgNTPServer2Autokey 1.3.6.1.4.1.5597.3.4.2.2.3
Is autokey enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTPServer2Prefer 1.3.6.1.4.1.5597.3.4.2.2.4
Is the preferred flag enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTPServer3IP 1.3.6.1.4.1.5597.3.4.2.3.1
IP address for external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNTPServer3Key 1.3.6.1.4.1.5597.3.4.2.3.2
Key for external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtCfgNTPServer3Autokey 1.3.6.1.4.1.5597.3.4.2.3.3
Is autokey enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTPServer3Prefer 1.3.6.1.4.1.5597.3.4.2.3.4
Is the preferred flag enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTPServer4IP 1.3.6.1.4.1.5597.3.4.2.4.1
IP address for external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNTPServer4Key 1.3.6.1.4.1.5597.3.4.2.4.2
Key for external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtCfgNTPServer4Autokey 1.3.6.1.4.1.5597.3.4.2.4.3
Is autokey enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTPServer4Prefer 1.3.6.1.4.1.5597.3.4.2.4.4
Is the preferred flag enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTPServer5IP 1.3.6.1.4.1.5597.3.4.2.5.1
IP address for external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNTPServer5Key 1.3.6.1.4.1.5597.3.4.2.5.2
Key for external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtCfgNTPServer5Autokey 1.3.6.1.4.1.5597.3.4.2.5.3
Is autokey enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTPServer5Prefer 1.3.6.1.4.1.5597.3.4.2.5.4
Is the preferred flag enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTPServer6IP 1.3.6.1.4.1.5597.3.4.2.6.1
IP address for external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNTPServer6Key 1.3.6.1.4.1.5597.3.4.2.6.2
Key for external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtCfgNTPServer6Autokey 1.3.6.1.4.1.5597.3.4.2.6.3
Is autokey enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTPServer6Prefer 1.3.6.1.4.1.5597.3.4.2.6.4
Is the preferred flag enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTPServer7IP 1.3.6.1.4.1.5597.3.4.2.7.1
IP address for external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNTPServer7Key 1.3.6.1.4.1.5597.3.4.2.7.2
Key for external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtCfgNTPServer7Autokey 1.3.6.1.4.1.5597.3.4.2.7.3
Is autokey enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTPServer7Prefer 1.3.6.1.4.1.5597.3.4.2.7.4
Is the preferred flag enabled for the external NTP server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTPStratumLocalClock 1.3.6.1.4.1.5597.3.4.2.8
The stratum value assigned to the local clock of the timeserver
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..15  

mbgLtCfgNTPTrustedKey 1.3.6.1.4.1.5597.3.4.2.9
The key used for the internal refclock of the timeserver
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtCfgNTPBroadcastIP 1.3.6.1.4.1.5597.3.4.2.10
NTP broadcast IP address
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNTPBroadcastKey 1.3.6.1.4.1.5597.3.4.2.11
Key used for NTP broadcasts
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtCfgNTPBroadcastAutokey 1.3.6.1.4.1.5597.3.4.2.12
Is autokey generation used for NTP broadcasts
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTPAutokeyFeature 1.3.6.1.4.1.5597.3.4.2.13
Is the NTP autokey feature enabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgNTPAtomPPS 1.3.6.1.4.1.5597.3.4.2.14
Is the NTP atom pps feature enabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEMail 1.3.6.1.4.1.5597.3.4.3
OBJECT IDENTIFIER    

mbgLtCfgEMailTo 1.3.6.1.4.1.5597.3.4.3.1
EMail address to send alerts etc. to (receiving address)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEMailFrom 1.3.6.1.4.1.5597.3.4.3.2
EMail address to send alerts etc. from (sending address)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEMailSmarthost 1.3.6.1.4.1.5597.3.4.3.3
SMTP smarthost used to send mail
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgSNMP 1.3.6.1.4.1.5597.3.4.4
OBJECT IDENTIFIER    

mbgLtCfgSNMPTrapReceiver1 1.3.6.1.4.1.5597.3.4.4.1
First SNMP trap receiver host
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgSNMPTrapReceiver2 1.3.6.1.4.1.5597.3.4.4.2
Second SNMP trap receiver host
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgSNMPTrapRec1Community 1.3.6.1.4.1.5597.3.4.4.3
First SNMP trap receiver community
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgSNMPTrapRec2Community 1.3.6.1.4.1.5597.3.4.4.4
Second SNMP trap receiver community
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgSNMPReadOnlyCommunity 1.3.6.1.4.1.5597.3.4.4.5
SNMP community string for read-only access
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgSNMPReadWriteCommunity 1.3.6.1.4.1.5597.3.4.4.6
SNMP community string for read-write access
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgSNMPContact 1.3.6.1.4.1.5597.3.4.4.7
SNMP contact string for Lantime
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgSNMPLocation 1.3.6.1.4.1.5597.3.4.4.8
SNMP location string for Lantime
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgWinpopup 1.3.6.1.4.1.5597.3.4.5
OBJECT IDENTIFIER    

mbgLtCfgWMailAddress1 1.3.6.1.4.1.5597.3.4.5.1
First windows popup alert receiver
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgWMailAddress2 1.3.6.1.4.1.5597.3.4.5.2
Second windows popup alert receiver
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgWalldisplay 1.3.6.1.4.1.5597.3.4.6
OBJECT IDENTIFIER    

mbgLtCfgVP100Display1IP 1.3.6.1.4.1.5597.3.4.6.1
IP address of first VP100 wall display
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgVP100Display1SN 1.3.6.1.4.1.5597.3.4.6.2
Serial number of first VP100 wall display
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgVP100Display2IP 1.3.6.1.4.1.5597.3.4.6.3
IP address of second VP100 wall display
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgVP100Display2SN 1.3.6.1.4.1.5597.3.4.6.4
Serial number of second VP100 wall display
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNotify 1.3.6.1.4.1.5597.3.4.7
OBJECT IDENTIFIER    

mbgLtCfgNotifyNTPNotSync 1.3.6.1.4.1.5597.3.4.7.1
Which alerts are sent in case of a NTP_not_sync event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNotifyNTPStopped 1.3.6.1.4.1.5597.3.4.7.2
Which alerts are sent in case of a NTP_stopped event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNotifyServerBoot 1.3.6.1.4.1.5597.3.4.7.3
Which alerts are sent in case of a server_boot event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNotifyRefclkNoResponse 1.3.6.1.4.1.5597.3.4.7.4
Which alerts are sent in case of a refclock_not_responding event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNotifyRefclockNotSync 1.3.6.1.4.1.5597.3.4.7.5
Which alerts are sent in case of a refclock_not_sync event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNotifyAntennaFaulty 1.3.6.1.4.1.5597.3.4.7.6
Which alerts are sent in case of an antenna_faulty event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNotifyAntennaReconnect 1.3.6.1.4.1.5597.3.4.7.7
Which alerts are sent in case of an antenna_reconnect event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNotifyConfigChanged 1.3.6.1.4.1.5597.3.4.7.8
Which alerts are sent in case of a config_changed event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNotifySHSTimeLimitError 1.3.6.1.4.1.5597.3.4.7.9
Which alerts are sent in case of a SHS_timelimiterror event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgNotifyLeapSecond 1.3.6.1.4.1.5597.3.4.7.10
Which alerts are sent in case of a Leap_Second_Announced event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernet 1.3.6.1.4.1.5597.3.4.8
OBJECT IDENTIFIER    

mbgLtCfgEthernetIf0 1.3.6.1.4.1.5597.3.4.8.0
OBJECT IDENTIFIER    

mbgLtCfgEthernetIf1 1.3.6.1.4.1.5597.3.4.8.1
OBJECT IDENTIFIER    

mbgLtCfgEthernetIf2 1.3.6.1.4.1.5597.3.4.8.2
OBJECT IDENTIFIER    

mbgLtCfgEthernetIf3 1.3.6.1.4.1.5597.3.4.8.3
OBJECT IDENTIFIER    

mbgLtCfgEthernetIf4 1.3.6.1.4.1.5597.3.4.8.4
OBJECT IDENTIFIER    

mbgLtCfgEthernetIf5 1.3.6.1.4.1.5597.3.4.8.5
OBJECT IDENTIFIER    

mbgLtCfgEthernetIf6 1.3.6.1.4.1.5597.3.4.8.6
OBJECT IDENTIFIER    

mbgLtCfgEthernetIf7 1.3.6.1.4.1.5597.3.4.8.7
OBJECT IDENTIFIER    

mbgLtCfgEthernetIf8 1.3.6.1.4.1.5597.3.4.8.8
OBJECT IDENTIFIER    

mbgLtCfgEthernetIf9 1.3.6.1.4.1.5597.3.4.8.9
OBJECT IDENTIFIER    

mbgLtCfgEthernetIf0IPv4IP 1.3.6.1.4.1.5597.3.4.8.0.1
The IPv4 address of the first ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf0IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.0.2
The IPv4 netmask of the first ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf0IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.0.3
The IPv4 gateway address of the first ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf0DHCPClient 1.3.6.1.4.1.5597.3.4.8.0.4
Is DHCP used to get IP parameters for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf0IPv6IP1 1.3.6.1.4.1.5597.3.4.8.0.5
The first IPv6 address of the first ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf0IPv6IP2 1.3.6.1.4.1.5597.3.4.8.0.6
The second IPv6 address of the first ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf0IPv6IP3 1.3.6.1.4.1.5597.3.4.8.0.7
The third IPv6 address of the first ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf0IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.0.8
Is IPv6 Autoconf used for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf0NetLinkMode 1.3.6.1.4.1.5597.3.4.8.0.9
Link mode for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)  

mbgLtCfgEthernetIf1IPv4IP 1.3.6.1.4.1.5597.3.4.8.1.1
The IPv4 address of the second ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf1IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.1.2
The IPv4 netmask of the second ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf1IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.1.3
The IPv4 gateway address of the second ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf1DHCPClient 1.3.6.1.4.1.5597.3.4.8.1.4
Is DHCP used to get IP parameters for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf1IPv6IP1 1.3.6.1.4.1.5597.3.4.8.1.5
The first IPv6 address of the second ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf1IPv6IP2 1.3.6.1.4.1.5597.3.4.8.1.6
The second IPv6 address of the second ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf1IPv6IP3 1.3.6.1.4.1.5597.3.4.8.1.7
The third IPv6 address of the second ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf1IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.1.8
Is IPv6 Autoconf used for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf1NetLinkMode 1.3.6.1.4.1.5597.3.4.8.1.9
Link mode for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)  

mbgLtCfgEthernetIf2IPv4IP 1.3.6.1.4.1.5597.3.4.8.2.1
The IPv4 address of the third ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf2IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.2.2
The IPv4 netmask of the third ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf2IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.2.3
The IPv4 gateway address of the third ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf2DHCPClient 1.3.6.1.4.1.5597.3.4.8.2.4
Is DHCP used to get IP parameters for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf2IPv6IP1 1.3.6.1.4.1.5597.3.4.8.2.5
The first IPv6 address of the third ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf2IPv6IP2 1.3.6.1.4.1.5597.3.4.8.2.6
The second IPv6 address of the third ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf2IPv6IP3 1.3.6.1.4.1.5597.3.4.8.2.7
The third IPv6 address of the third ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf2IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.2.8
Is IPv6 Autoconf used for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf2NetLinkMode 1.3.6.1.4.1.5597.3.4.8.2.9
Link mode for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)  

mbgLtCfgEthernetIf3IPv4IP 1.3.6.1.4.1.5597.3.4.8.3.1
The IPv4 address of the fourth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf3IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.3.2
The IPv4 netmask of the fourth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf3IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.3.3
The IPv4 gateway address of the fourth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf3DHCPClient 1.3.6.1.4.1.5597.3.4.8.3.4
Is DHCP used to get IP parameters for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf3IPv6IP1 1.3.6.1.4.1.5597.3.4.8.3.5
The first IPv6 address of the fourth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf3IPv6IP2 1.3.6.1.4.1.5597.3.4.8.3.6
The second IPv6 address of the fourth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf3IPv6IP3 1.3.6.1.4.1.5597.3.4.8.3.7
The third IPv6 address of the fourth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf3IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.3.8
Is IPv6 Autoconf used for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf3NetLinkMode 1.3.6.1.4.1.5597.3.4.8.3.9
Link mode for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)  

mbgLtCfgEthernetIf4IPv4IP 1.3.6.1.4.1.5597.3.4.8.4.1
The IPv4 address of the fifth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf4IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.4.2
The IPv4 netmask of the fifth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf4IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.4.3
The IPv4 gateway address of the fifth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf4DHCPClient 1.3.6.1.4.1.5597.3.4.8.4.4
Is DHCP used to get IP parameters for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf4IPv6IP1 1.3.6.1.4.1.5597.3.4.8.4.5
The first IPv6 address of the fifth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf4IPv6IP2 1.3.6.1.4.1.5597.3.4.8.4.6
The second IPv6 address of the fifth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf4IPv6IP3 1.3.6.1.4.1.5597.3.4.8.4.7
The third IPv6 address of the fifth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf4IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.4.8
Is IPv6 Autoconf used for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf4NetLinkMode 1.3.6.1.4.1.5597.3.4.8.4.9
Link mode for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)  

mbgLtCfgEthernetIf5IPv4IP 1.3.6.1.4.1.5597.3.4.8.5.1
The IPv4 address of the sixth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf5IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.5.2
The IPv4 netmask of the sixth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf5IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.5.3
The IPv4 gateway address of the sixth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf5DHCPClient 1.3.6.1.4.1.5597.3.4.8.5.4
Is DHCP used to get IP parameters for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf5IPv6IP1 1.3.6.1.4.1.5597.3.4.8.5.5
The first IPv6 address of the sixth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf5IPv6IP2 1.3.6.1.4.1.5597.3.4.8.5.6
The second IPv6 address of the sixth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf5IPv6IP3 1.3.6.1.4.1.5597.3.4.8.5.7
The third IPv6 address of the sixth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf5IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.5.8
Is IPv6 Autoconf used for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf5NetLinkMode 1.3.6.1.4.1.5597.3.4.8.5.9
Link mode for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)  

mbgLtCfgEthernetIf6IPv4IP 1.3.6.1.4.1.5597.3.4.8.6.1
The IPv4 address of the seventh ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf6IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.6.2
The IPv4 netmask of the seventh ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf6IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.6.3
The IPv4 gateway address of the seventh ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf6DHCPClient 1.3.6.1.4.1.5597.3.4.8.6.4
Is DHCP used to get IP parameters for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf6IPv6IP1 1.3.6.1.4.1.5597.3.4.8.6.5
The first IPv6 address of the seventh ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf6IPv6IP2 1.3.6.1.4.1.5597.3.4.8.6.6
The second IPv6 address of the seventh ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf6IPv6IP3 1.3.6.1.4.1.5597.3.4.8.6.7
The third IPv6 address of the seventh ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf6IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.6.8
Is IPv6 Autoconf used for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf6NetLinkMode 1.3.6.1.4.1.5597.3.4.8.6.9
Link mode for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)  

mbgLtCfgEthernetIf7IPv4IP 1.3.6.1.4.1.5597.3.4.8.7.1
The IPv4 address of the eighth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf7IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.7.2
The IPv4 netmask of the eighth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf7IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.7.3
The IPv4 gateway address of the eighth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf7DHCPClient 1.3.6.1.4.1.5597.3.4.8.7.4
Is DHCP used to get IP parameters for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf7IPv6IP1 1.3.6.1.4.1.5597.3.4.8.7.5
The first IPv6 address of the eighth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf7IPv6IP2 1.3.6.1.4.1.5597.3.4.8.7.6
The second IPv6 address of the eighth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf7IPv6IP3 1.3.6.1.4.1.5597.3.4.8.7.7
The third IPv6 address of the eighth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf7IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.7.8
Is IPv6 Autoconf used for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf7NetLinkMode 1.3.6.1.4.1.5597.3.4.8.7.9
Link mode for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)  

mbgLtCfgEthernetIf8IPv4IP 1.3.6.1.4.1.5597.3.4.8.8.1
The IPv4 address of the nineth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf8IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.8.2
The IPv4 netmask of the nineth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf8IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.8.3
The IPv4 gateway address of the nineth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf8DHCPClient 1.3.6.1.4.1.5597.3.4.8.8.4
Is DHCP used to get IP parameters for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf8IPv6IP1 1.3.6.1.4.1.5597.3.4.8.8.5
The first IPv6 address of the nineth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf8IPv6IP2 1.3.6.1.4.1.5597.3.4.8.8.6
The second IPv6 address of the nineth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf8IPv6IP3 1.3.6.1.4.1.5597.3.4.8.8.7
The third IPv6 address of the nineth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf8IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.8.8
Is IPv6 Autoconf used for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf8NetLinkMode 1.3.6.1.4.1.5597.3.4.8.8.9
Link mode for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)  

mbgLtCfgEthernetIf9IPv4IP 1.3.6.1.4.1.5597.3.4.8.9.1
The IPv4 address of the tenth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf9IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.9.2
The IPv4 netmask of the tenth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf9IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.9.3
The IPv4 gateway address of the tenth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf9DHCPClient 1.3.6.1.4.1.5597.3.4.8.9.4
Is DHCP used to get IP parameters for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf9IPv6IP1 1.3.6.1.4.1.5597.3.4.8.9.5
The first IPv6 address of the tenth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf9IPv6IP2 1.3.6.1.4.1.5597.3.4.8.9.6
The second IPv6 address of the tenth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf9IPv6IP3 1.3.6.1.4.1.5597.3.4.8.9.7
The third IPv6 address of the tenth ethernet interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCfgEthernetIf9IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.9.8
Is IPv6 Autoconf used for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mbgLtCfgEthernetIf9NetLinkMode 1.3.6.1.4.1.5597.3.4.8.9.9
Link mode for this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)  

mbgLtCfgSHS 1.3.6.1.4.1.5597.3.4.9
OBJECT IDENTIFIER    

mbgLtCfgSHSCritLimit 1.3.6.1.4.1.5597.3.4.9.1
Max. number of milliseconds the two SHS references can differ before a SHS Critical Timelimit error is issued
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtCfgSHSWarnLimit 1.3.6.1.4.1.5597.3.4.9.2
Max. number of milliseconds the two SHS references can differ before a SHS Warning Timelimit error is issued
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtCfgMRS 1.3.6.1.4.1.5597.3.4.10
OBJECT IDENTIFIER    

mbgLtCfgMRSRefPriority 1.3.6.1.4.1.5597.3.4.10.1
Priority of MRS Reference Sources, as a comma-separated list
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtCmd 1.3.6.1.4.1.5597.3.5
OBJECT IDENTIFIER    

mbgLtCmdExecute 1.3.6.1.4.1.5597.3.5.1
Send a command to the timeserver to be executed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ready(0), doReboot(1), doFirmwareUpdate(2), doReloadConfig(3), doGenerateSSHKey(4), doGenerateHTTPSKey(5), doResetFactoryDefaults(6), doGenerateNewNTPAutokeyCert(7), doSendTestNotification(8), doResetSHSTimeLimitError(9)  

mbgLtCmdSetRefTime 1.3.6.1.4.1.5597.3.5.2
Set the time of the reference clock and the LANTIME itself
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mbgLtPtp 1.3.6.1.4.1.5597.3.10
OBJECT IDENTIFIER    

mbgLtPtpMode 1.3.6.1.4.1.5597.3.10.1
Display current PTPv2 modus as string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtPtpModeVal 1.3.6.1.4.1.5597.3.10.2
Display current PTPv2 modus as integer
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER stopped(0), master(1), slave(2), ordinary(3)  

mbgLtPtpPortState 1.3.6.1.4.1.5597.3.10.3
Current PTPv2 port state as string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtPtpPortStateVal 1.3.6.1.4.1.5597.3.10.4
Current PTPv2 port state as integer
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER uncalibrated(0), initializing(1), listening(2), master(3), slave(4), unicastmaster(5), unicastslave(6)  

mbgLtPtpOffsetFromGM 1.3.6.1.4.1.5597.3.10.5
Current PTPv2 offset from grandmaster as string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtPtpOffsetFromGMVal 1.3.6.1.4.1.5597.3.10.6
Current PTPv2 offset from grandmaster in nanoseconds
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtPtpDelay 1.3.6.1.4.1.5597.3.10.7
shows the current network delay in nanoseconds as string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mbgLtPtpDelayVal 1.3.6.1.4.1.5597.3.10.8
shows the current network delay in nanoseconds
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtFdm 1.3.6.1.4.1.5597.3.11
OBJECT IDENTIFIER    

mbgLtFdmPlFreq 1.3.6.1.4.1.5597.3.11.1
shows the current powerline frequency in mHz as an Integer32 value
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtFdmFreqDev 1.3.6.1.4.1.5597.3.11.2
shows the current frequency deviation in mHz as an Integer32 value
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtFdmNomFreq 1.3.6.1.4.1.5597.3.11.3
shows the nominal frequency in mHz as an Integer32 value
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

mbgLtConformance 1.3.6.1.4.1.5597.3.90
OBJECT IDENTIFIER    

mbgLtCompliances 1.3.6.1.4.1.5597.3.90.1
OBJECT IDENTIFIER    

mbgLtGroups 1.3.6.1.4.1.5597.3.90.2
OBJECT IDENTIFIER    

mbgLtCompliance 1.3.6.1.4.1.5597.3.90.1.1
The compliance statement for SNMP entities which implement version 2 of the LANTIME MIB
Status: current Access: read-only
MODULE-COMPLIANCE    

mbgLtObjectsGroup 1.3.6.1.4.1.5597.3.90.2.1
The collection of objects for the LANTIME MIB
Status: current Access: read-only
OBJECT-GROUP    

mbgLtTrapsGroup 1.3.6.1.4.1.5597.3.90.2.2
The collection of traps for the LANTIME MIB
Status: current Access: read-only
NOTIFICATION-GROUP