LLDP-EXT-DOT1-PE-MIB

File: LLDP-EXT-DOT1-PE-MIB.mib (11144 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB LLDP-EXT-DOT1-EVB-EXTENSIONS-MIB LLDP-V2-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
TruthValue MacAddress MODULE-COMPLIANCE
OBJECT-GROUP ifGeneralInformationGroup lldpXdot1StandAloneExtensions
lldpV2Extensions lldpV2LocPortIfIndex lldpV2RemTimeMark
lldpV2RemLocalIfIndex lldpV2RemLocalDestMACAddress lldpV2RemIndex
lldpV2PortConfigEntry

Defined Types

LldpXdot1PeConfigPortExtensionEntry  
SEQUENCE    
  lldpXdot1PeConfigPortExtensionTxEnable TruthValue

LldpXdot1PeLocPortExtensionEntry  
SEQUENCE    
  lldpXdot1PeLocPECascadePortPriority Unsigned32
  lldpXdot1PeLocPEAddress MacAddress
  lldpXdot1PeLocPECSPAddress MacAddress

LldpXdot1PeRemPortExtensionEntry  
SEQUENCE    
  lldpXdot1PeRemPECascadePortPriority Unsigned32
  lldpXdot1PeRemPEAddress MacAddress
  lldpXdot1PeRemPECSPAddress MacAddress

Defined Values

lldpXDot1PEExtensions 1.3.111.2.802.1.1.13.1.5.32962.7.2
The LLDP Management Information Base extension module for IEEE 802.1 organizationally defined discovery information to support Port Extension. This MIB module is rooted under the lldpXdot1StandAloneExtensions OID arc, in order to allow it to be defined independently of other 802.1 LLDP extension MIBs. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1BR-2012. Copyright (C) IEEE. This version of this MIB module is published as Annex B.5 of IEEE Std 802.1BR-2012; see the standard itself for full legal notices.
MODULE-IDENTITY    

lldpXdot1PeMIB 1.3.111.2.802.1.1.13.1.5.32962.7.2.1
OBJECT IDENTIFIER    

lldpXdot1PeObjects 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1
OBJECT IDENTIFIER    

lldpXdot1PeConfig 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.1
OBJECT IDENTIFIER    

lldpXdot1PeLocalData 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.2
OBJECT IDENTIFIER    

lldpXdot1PeRemoteData 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.3
OBJECT IDENTIFIER    

lldpXdot1PeConfigPortExtensionTable 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.1.1
A table that controls selection of LLDP Port Extension TLVs to be transmitted on individual ports.
OBJECT-TYPE    
  SEQUENCE OF  
    LldpXdot1PeConfigPortExtensionEntry

lldpXdot1PeConfigPortExtensionEntry 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.1.1.1
LLDP configuration information that specifies Port Exension configuration. This configuration object augments the lldpV2Xdot1LocPortExtensionEntry, therefore it is only present along with the associated lldpV2Xdot1LocPortExtensionEntry entry. Each active lldpV2Xdot1ConfigPortExensionEntry must be restored from non-volatile storage (along with the corresponding lldpV2Xdot1LocPortExtensionEntry) after a re-initialization of the management system.
OBJECT-TYPE    
  LldpXdot1PeConfigPortExtensionEntry  

lldpXdot1PeConfigPortExtensionTxEnable 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.1.1.1.1
The lldpXdot1PeConfigPortExtensionTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Port Extension TLV transmission is allowed on a given LLDP transmission capable port. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
OBJECT-TYPE    
  TruthValue  

lldpXdot1PeLocPortExtensionTable 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.2.1
This table contains one row per port of Port Extension information (as a part of the LLDP 802.1 organizational extension) on the local system known to this agent.
OBJECT-TYPE    
  SEQUENCE OF  
    LldpXdot1PeLocPortExtensionEntry

lldpXdot1PeLocPortExtensionEntry 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.2.1.1
Port Extension information about a particular Port Extender Port.
OBJECT-TYPE    
  LldpXdot1PeLocPortExtensionEntry  

lldpXdot1PeLocPECascadePortPriority 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.2.1.1.1
Contains the cascade port priority.
OBJECT-TYPE    
  Unsigned32 0..255  

lldpXdot1PeLocPEAddress 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.2.1.1.2
This object contains the MAC address that uniquely identifies the Port Extender.
OBJECT-TYPE    
  MacAddress  

lldpXdot1PeLocPECSPAddress 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.2.1.1.3
This object contains the MAC address to be used for the Port Extension control and status protocol.
OBJECT-TYPE    
  MacAddress  

lldpXdot1PeRemPortExtensionTable 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.3.1
This table contains Port Extension information (as a part of the LLDP IEEE 802.1 organizational extension) of the remote system.
OBJECT-TYPE    
  SEQUENCE OF  
    LldpXdot1PeRemPortExtensionEntry

lldpXdot1PeRemPortExtensionEntry 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.3.1.1
Port Extension information about remote systems port component.
OBJECT-TYPE    
  LldpXdot1PeRemPortExtensionEntry  

lldpXdot1PeRemPECascadePortPriority 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.3.1.1.1
The cascade port priority.
OBJECT-TYPE    
  Unsigned32 0..255  

lldpXdot1PeRemPEAddress 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.3.1.1.2
This object contains the MAC address that uniquely identifies the Port Extender.
OBJECT-TYPE    
  MacAddress  

lldpXdot1PeRemPECSPAddress 1.3.111.2.802.1.1.13.1.5.32962.7.2.1.1.3.1.1.3
This object contains the MAC address to be used for the Port Extension Control and Status Protocol.
OBJECT-TYPE    
  MacAddress  

lldpXdot1PeConformance 1.3.111.2.802.1.1.13.1.5.32962.7.2.2
OBJECT IDENTIFIER    

lldpXdot1PeCompliances 1.3.111.2.802.1.1.13.1.5.32962.7.2.2.1
OBJECT IDENTIFIER    

lldpXdot1PeGroups 1.3.111.2.802.1.1.13.1.5.32962.7.2.2.2
OBJECT IDENTIFIER    

lldpXdot1PeCompliance 1.3.111.2.802.1.1.13.1.5.32962.7.2.2.1.1
A compliance statement for entities that implement the IEEE 802.1 organizationally defined Port Extension LLDP extension MIB. This group is mandatory for agents that implement the Port Extension peSet TLV set.
MODULE-COMPLIANCE    

lldpXdot1PeGroup 1.3.111.2.802.1.1.13.1.5.32962.7.2.2.2.1
The collection of objects that support the Port Extension peSet TLV set.
OBJECT-GROUP