LLDP-EXT-DOT1-MIB

File: LLDP-EXT-DOT1-MIB.mib (30828 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
SNMP-FRAMEWORK-MIB LLDP-MIB Q-BRIDGE-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
MODULE-COMPLIANCE OBJECT-GROUP TruthValue
SnmpAdminString lldpExtensions lldpLocPortNum
lldpRemTimeMark lldpRemLocalPortNum lldpRemIndex
lldpPortConfigEntry VlanId

Defined Types

LldpXdot1ConfigPortVlanEntry  
SEQUENCE    
  lldpXdot1ConfigPortVlanTxEnable TruthValue

LldpXdot1ConfigVlanNameEntry  
SEQUENCE    
  lldpXdot1ConfigVlanNameTxEnable TruthValue

LldpXdot1ConfigProtoVlanEntry  
SEQUENCE    
  lldpXdot1ConfigProtoVlanTxEnable TruthValue

LldpXdot1ConfigProtocolEntry  
SEQUENCE    
  lldpXdot1ConfigProtocolTxEnable TruthValue

LldpXdot1LocEntry  
SEQUENCE    
  lldpXdot1LocPortVlanId Integer32

LldpXdot1LocProtoVlanEntry  
SEQUENCE    
  lldpXdot1LocProtoVlanId Integer32
  lldpXdot1LocProtoVlanSupported TruthValue
  lldpXdot1LocProtoVlanEnabled TruthValue

LldpXdot1LocVlanNameEntry  
SEQUENCE    
  lldpXdot1LocVlanId VlanId
  lldpXdot1LocVlanName SnmpAdminString

LldpXdot1LocProtocolEntry  
SEQUENCE    
  lldpXdot1LocProtocolIndex Integer32
  lldpXdot1LocProtocolId STRING

LldpXdot1RemEntry  
SEQUENCE    
  lldpXdot1RemPortVlanId Integer32

LldpXdot1RemProtoVlanEntry  
SEQUENCE    
  lldpXdot1RemProtoVlanId Integer32
  lldpXdot1RemProtoVlanSupported TruthValue
  lldpXdot1RemProtoVlanEnabled TruthValue

LldpXdot1RemVlanNameEntry  
SEQUENCE    
  lldpXdot1RemVlanId VlanId
  lldpXdot1RemVlanName SnmpAdminString

LldpXdot1RemProtocolEntry  
SEQUENCE    
  lldpXdot1RemProtocolIndex Integer32
  lldpXdot1RemProtocolId STRING

Defined Values

lldpXdot1MIB 1.0.8802.1.1.2.1.5.32962
The LLDP Management Information Base extension module for IEEE 802.1 organizationally defined discovery information. In order to assure the uniqueness of the LLDP-MIB, lldpXdot1MIB is branched from lldpExtensions using OUI value as the node. An OUI/'company_id' is a 24 bit globally unique assigned number referenced by various standards. Copyright (C) IEEE (2005). This version of this MIB module is published as Annex F.7.1 of IEEE Std 802.1AB-2005; see the standard itself for full legal notices.
MODULE-IDENTITY    

lldpXdot1Objects 1.0.8802.1.1.2.1.5.32962.1
OBJECT IDENTIFIER    

lldpXdot1Config 1.0.8802.1.1.2.1.5.32962.1.1
OBJECT IDENTIFIER    

lldpXdot1LocalData 1.0.8802.1.1.2.1.5.32962.1.2
OBJECT IDENTIFIER    

lldpXdot1RemoteData 1.0.8802.1.1.2.1.5.32962.1.3
OBJECT IDENTIFIER    

lldpXdot1ConfigPortVlanTable 1.0.8802.1.1.2.1.5.32962.1.1.1
A table that controls selection of LLDP Port VLAN-ID TLVs to be transmitted on individual ports.
OBJECT-TYPE    
  SEQUENCE OF  
    LldpXdot1ConfigPortVlanEntry

lldpXdot1ConfigPortVlanEntry 1.0.8802.1.1.2.1.5.32962.1.1.1.1
LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Port VLAN-ID TLV on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpConfigEntry must be restored from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system.
OBJECT-TYPE    
  LldpXdot1ConfigPortVlanEntry  

lldpXdot1ConfigPortVlanTxEnable 1.0.8802.1.1.2.1.5.32962.1.1.1.1.1
The lldpXdot1ConfigPortVlanTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined port VLAN TLV transmission is allowed on a given LLDP transmission capable port. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
OBJECT-TYPE    
  TruthValue  

lldpXdot1ConfigVlanNameTable 1.0.8802.1.1.2.1.5.32962.1.1.2
The table that controls selection of LLDP VLAN name TLV instances to be transmitted on individual ports.
OBJECT-TYPE    
  SEQUENCE OF  
    LldpXdot1ConfigVlanNameEntry

lldpXdot1ConfigVlanNameEntry 1.0.8802.1.1.2.1.5.32962.1.1.2.1
LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System VLAN name instance will be transmitted. This configuration object augments the lldpLocVlanEntry, therefore it is only present along with the VLAN Name instance contained in the associated lldpLocVlanNameEntry entry. Each active lldpXdot1ConfigVlanNameEntry must be restored from non-volatile storage (along with the corresponding lldpXdot1LocVlanNameEntry) after a re-initialization of the management system.
OBJECT-TYPE    
  LldpXdot1ConfigVlanNameEntry  

lldpXdot1ConfigVlanNameTxEnable 1.0.8802.1.1.2.1.5.32962.1.1.2.1.1
The boolean value that indicates whether the corresponding Local System VLAN name instance will be transmitted on the port defined by the given lldpXdot1LocVlanNameEntry. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
OBJECT-TYPE    
  TruthValue  

lldpXdot1ConfigProtoVlanTable 1.0.8802.1.1.2.1.5.32962.1.1.3
The table that controls selection of LLDP Port and Protocol VLAN ID TLV instances to be transmitted on individual ports.
OBJECT-TYPE    
  SEQUENCE OF  
    LldpXdot1ConfigProtoVlanEntry

lldpXdot1ConfigProtoVlanEntry 1.0.8802.1.1.2.1.5.32962.1.1.3.1
LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol VLAN instance will be transmitted. This configuration object augments the lldpXdot1LocVlanEntry, therefore it is only present along with the Port and Protocol VLAN ID instance contained in the associated lldpXdot1LocVlanEntry entry. Each active lldpXdot1ConfigProtoVlanEntry must be restored from non-volatile storage (along with the corresponding lldpXdot1LocProtoVlanEntry) after a re-initialization of the management system.
OBJECT-TYPE    
  LldpXdot1ConfigProtoVlanEntry  

lldpXdot1ConfigProtoVlanTxEnable 1.0.8802.1.1.2.1.5.32962.1.1.3.1.1
The boolean value that indicates whether the corresponding Local System Port and Protocol VLAN instance will be transmitted on the port defined by the given lldpXdot1LocProtoVlanEntry. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
OBJECT-TYPE    
  TruthValue  

lldpXdot1ConfigProtocolTable 1.0.8802.1.1.2.1.5.32962.1.1.4
The table that controls selection of LLDP Protocol TLV instances to be transmitted on individual ports.
OBJECT-TYPE    
  SEQUENCE OF  
    LldpXdot1ConfigProtocolEntry

lldpXdot1ConfigProtocolEntry 1.0.8802.1.1.2.1.5.32962.1.1.4.1
LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol instance will be transmitted. This configuration object augments the lldpXdot1LocProtoEntry, therefore it is only present along with the Protocol instance contained in the associated lldpXdot1LocProtoEntry entry. Each active lldpXdot1ConfigProtocolEntry must be restored from non-volatile storage (along with the corresponding lldpXdot1LocProtocolEntry) after a re-initialization of the management system.
OBJECT-TYPE    
  LldpXdot1ConfigProtocolEntry  

lldpXdot1ConfigProtocolTxEnable 1.0.8802.1.1.2.1.5.32962.1.1.4.1.1
The boolean value that indicates whether the corresponding Local System Protocol Identity instance will be transmitted on the port defined by the given lldpXdot1LocProtocolEntry. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
OBJECT-TYPE    
  TruthValue  

lldpXdot1LocTable 1.0.8802.1.1.2.1.5.32962.1.2.1
This table contains one row per port for IEEE 802.1 organizationally defined LLDP extension on the local system known to this agent.
OBJECT-TYPE    
  SEQUENCE OF  
    LldpXdot1LocEntry

lldpXdot1LocEntry 1.0.8802.1.1.2.1.5.32962.1.2.1.1
Information about IEEE 802.1 organizationally defined LLDP extension.
OBJECT-TYPE    
  LldpXdot1LocEntry  

lldpXdot1LocPortVlanId 1.0.8802.1.1.2.1.5.32962.1.2.1.1.1
The integer value used to identify the port's VLAN identifier associated with the local system. A value of zero shall be used if the system either does not know the PVID or does not support port-based VLAN operation.
OBJECT-TYPE    
  Integer32 0 | 1..4094  

lldpXdot1LocProtoVlanTable 1.0.8802.1.1.2.1.5.32962.1.2.2
This table contains one or more rows per Port and Protocol VLAN information about the local system.
OBJECT-TYPE    
  SEQUENCE OF  
    LldpXdot1LocProtoVlanEntry

lldpXdot1LocProtoVlanEntry 1.0.8802.1.1.2.1.5.32962.1.2.2.1
Port and protocol VLAN ID Information about a particular port component. There may be multiple port and protocol VLANs, identified by a particular lldpXdot1LocProtoVlanId, configured on the given port.
OBJECT-TYPE    
  LldpXdot1LocProtoVlanEntry  

lldpXdot1LocProtoVlanId 1.0.8802.1.1.2.1.5.32962.1.2.2.1.1
The integer value used to identify the port and protocol VLANs associated with the given port associated with the local system. A value of zero shall be used if the system either does not know the protocol VLAN ID (PPVID) or does not support port and protocol VLAN operation.
OBJECT-TYPE    
  Integer32 0 | 1..4094  

lldpXdot1LocProtoVlanSupported 1.0.8802.1.1.2.1.5.32962.1.2.2.1.2
The truth value used to indicate whether the given port (associated with the local system) supports port and protocol VLANs.
OBJECT-TYPE    
  TruthValue  

lldpXdot1LocProtoVlanEnabled 1.0.8802.1.1.2.1.5.32962.1.2.2.1.3
The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the local system.
OBJECT-TYPE    
  TruthValue  

lldpXdot1LocVlanNameTable 1.0.8802.1.1.2.1.5.32962.1.2.3
This table contains one or more rows per IEEE 802.1Q VLAN name information on the local system known to this agent.
OBJECT-TYPE    
  SEQUENCE OF  
    LldpXdot1LocVlanNameEntry

lldpXdot1LocVlanNameEntry 1.0.8802.1.1.2.1.5.32962.1.2.3.1
VLAN name Information about a particular port component. There may be multiple VLANs, identified by a particular lldpXdot1LocVlanId, configured on the given port.
OBJECT-TYPE    
  LldpXdot1LocVlanNameEntry  

lldpXdot1LocVlanId 1.0.8802.1.1.2.1.5.32962.1.2.3.1.1
The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port is compatible.
OBJECT-TYPE    
  VlanId  

lldpXdot1LocVlanName 1.0.8802.1.1.2.1.5.32962.1.2.3.1.2
The string value used to identify VLAN name identified by the Vlan Id associated with the given port on the local system. This object should contain the value of the dot1QVLANStaticName object (defined in IETF RFC 2674) identified with the given lldpXdot1LocVlanId.
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

lldpXdot1LocProtocolTable 1.0.8802.1.1.2.1.5.32962.1.2.4
This table contains one or more rows per protocol identity information on the local system known to this agent.
OBJECT-TYPE    
  SEQUENCE OF  
    LldpXdot1LocProtocolEntry

lldpXdot1LocProtocolEntry 1.0.8802.1.1.2.1.5.32962.1.2.4.1
Information about particular protocols that are accessible through the given port component. There may be multiple protocols, identified by particular lldpXdot1ProtocolIndex, and lldpLocPortNum.
OBJECT-TYPE    
  LldpXdot1LocProtocolEntry  

lldpXdot1LocProtocolIndex 1.0.8802.1.1.2.1.5.32962.1.2.4.1.1
This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity.
OBJECT-TYPE    
  Integer32 1..2147483647  

lldpXdot1LocProtocolId 1.0.8802.1.1.2.1.5.32962.1.2.4.1.2
The octet string value used to identify the protocols associated with the given port of the local system.
OBJECT-TYPE    
  STRING Size(1..255)  

lldpXdot1RemTable 1.0.8802.1.1.2.1.5.32962.1.3.1
This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpXdot1RemEntry is present for each local port, or it may choose to maintain multiple lldpXdot1RemEntries for the same local port.
OBJECT-TYPE    
  SEQUENCE OF  
    LldpXdot1RemEntry

lldpXdot1RemEntry 1.0.8802.1.1.2.1.5.32962.1.3.1.1
Information about a particular port component.
OBJECT-TYPE    
  LldpXdot1RemEntry  

lldpXdot1RemPortVlanId 1.0.8802.1.1.2.1.5.32962.1.3.1.1.1
The integer value used to identify the port's VLAN identifier associated with the remote system. if the remote system either does not know the PVID or does not support port-based VLAN operation, the value of lldpXdot1RemPortVlanId should be zero.
OBJECT-TYPE    
  Integer32 0 | 1..4094  

lldpXdot1RemProtoVlanTable 1.0.8802.1.1.2.1.5.32962.1.3.2
This table contains one or more rows per Port and Protocol VLAN information about the remote system, received on the given port.
OBJECT-TYPE    
  SEQUENCE OF  
    LldpXdot1RemProtoVlanEntry

lldpXdot1RemProtoVlanEntry 1.0.8802.1.1.2.1.5.32962.1.3.2.1
Port and protocol VLAN name Information about a particular port component. There may be multiple protocol VLANs, identified by a particular lldpXdot1RemProtoVlanId, configured on the remote system.
OBJECT-TYPE    
  LldpXdot1RemProtoVlanEntry  

lldpXdot1RemProtoVlanId 1.0.8802.1.1.2.1.5.32962.1.3.2.1.1
The integer value used to identify the port and protocol VLANs associated with the given port associated with the remote system. If port and protocol VLANs are not supported on the given port associated with the remote system, or if the port is not enabled with any port and protocol VLAN, the value of lldpXdot1RemProtoVlanId should be zero.
OBJECT-TYPE    
  Integer32 0 | 1..4094  

lldpXdot1RemProtoVlanSupported 1.0.8802.1.1.2.1.5.32962.1.3.2.1.2
The truth value used to indicate whether the given port (associated with the remote system) is capable of supporting port and protocol VLANs.
OBJECT-TYPE    
  TruthValue  

lldpXdot1RemProtoVlanEnabled 1.0.8802.1.1.2.1.5.32962.1.3.2.1.3
The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the remote system.
OBJECT-TYPE    
  TruthValue  

lldpXdot1RemVlanNameTable 1.0.8802.1.1.2.1.5.32962.1.3.3
This table contains one or more rows per IEEE 802.1Q VLAN name information about the remote system, received on the given port.
OBJECT-TYPE    
  SEQUENCE OF  
    LldpXdot1RemVlanNameEntry

lldpXdot1RemVlanNameEntry 1.0.8802.1.1.2.1.5.32962.1.3.3.1
VLAN name Information about a particular port component. There may be multiple VLANs, identified by a particular lldpXdot1RemVlanId, received on the given port.
OBJECT-TYPE    
  LldpXdot1RemVlanNameEntry  

lldpXdot1RemVlanId 1.0.8802.1.1.2.1.5.32962.1.3.3.1.1
The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port of the remote system is compatible.
OBJECT-TYPE    
  VlanId  

lldpXdot1RemVlanName 1.0.8802.1.1.2.1.5.32962.1.3.3.1.2
The string value used to identify VLAN name identified by the VLAN Id associated with the remote system.
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

lldpXdot1RemProtocolTable 1.0.8802.1.1.2.1.5.32962.1.3.4
This table contains one or more rows per protocol information about the remote system, received on the given port.
OBJECT-TYPE    
  SEQUENCE OF  
    LldpXdot1RemProtocolEntry

lldpXdot1RemProtocolEntry 1.0.8802.1.1.2.1.5.32962.1.3.4.1
Protocol information about a particular port component. There may be multiple protocols, identified by a particular lldpXdot1ProtocolIndex, received on the given port.
OBJECT-TYPE    
  LldpXdot1RemProtocolEntry  

lldpXdot1RemProtocolIndex 1.0.8802.1.1.2.1.5.32962.1.3.4.1.1
This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity.
OBJECT-TYPE    
  Integer32 1..2147483647  

lldpXdot1RemProtocolId 1.0.8802.1.1.2.1.5.32962.1.3.4.1.2
The octet string value used to identify the protocols associated with the given port of remote system.
OBJECT-TYPE    
  STRING Size(1..255)  

lldpXdot1Conformance 1.0.8802.1.1.2.1.5.32962.2
OBJECT IDENTIFIER    

lldpXdot1Compliances 1.0.8802.1.1.2.1.5.32962.2.1
OBJECT IDENTIFIER    

lldpXdot1Groups 1.0.8802.1.1.2.1.5.32962.2.2
OBJECT IDENTIFIER    

lldpXdot1Compliance 1.0.8802.1.1.2.1.5.32962.2.1.1
The compliance statement for SNMP entities which implement the IEEE 802.1 organizationally defined LLDP extension MIB.
MODULE-COMPLIANCE    

lldpXdot1ConfigGroup 1.0.8802.1.1.2.1.5.32962.2.2.1
The collection of objects which are used to configure the IEEE 802.1 organizationally defined LLDP extension implementation behavior. This group is mandatory for agents which implement the IEEE 802.1 organizationally defined LLDP extension.
OBJECT-GROUP    

lldpXdot1LocSysGroup 1.0.8802.1.1.2.1.5.32962.2.2.2
The collection of objects which are used to represent IEEE 802.1 organizationally defined LLDP extension associated with the Local Device Information. This group is mandatory for agents which implement the IEEE 802.1 organizationally defined LLDP extension in the TX mode.
OBJECT-GROUP    

lldpXdot1RemSysGroup 1.0.8802.1.1.2.1.5.32962.2.2.3
The collection of objects which are used to represent LLDP 802.1 organizational extension Local Device Information. This group is mandatory for agents which implement the LLDP 802.1 organizational extension in the RX mode.
OBJECT-GROUP