LINKB-OPT-FDDI-MIB-1-1-2

File: LINKB-OPT-FDDI-MIB-1-1-2.mib (38703 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC-1215
DRAFT-FDDI-MIB-VER-3-2

Imported symbols

enterprises Counter OBJECT-TYPE
TRAP-TYPE FddiTimeNano FddiSMTStationIdType
fddimibSMTStationId fddimibSMTCFState fddimibSMTPeerWrapFlag
fddimibMACSMTAddress fddimibMACDaFlag fddimibMACUnaDaFlag
fddimibMACFrameErrorFlag fddimibMACFrameCts fddimibMACErrorCts
fddimibMACLostCts fddimibMACFrameErrorRatio fddimibMACNotCopiedCts
fddimibMACCopiedCts fddimibMACNotCopiedRatio fddimibMACNotCopiedFlag
fddimibMACUpstreamNbr fddimibMACOldUpstreamNbr fddimibMACDownstreamNbr
fddimibMACOldDownstreamNbr fddimibMACCurrentPath fddimibMACAvailablePaths
fddimibMACRequestedPaths fddimibPORTLerCutoff fddimibPORTLerAlarm
fddimibPORTLerEstimate fddimibPORTLemRejectCts fddimibPORTLemCts
fddimibPORTLerFlag fddimibPORTMyType fddimibPORTConnectState
fddimibPORTNeighborType fddimibPORTPCWithhold fddimibPORTAvailablePaths
fddimibPORTCurrentPath fddimibPORTRequestedPaths

Defined Types

LbOptSMTEntry  
SEQUENCE    
  lbOptSMTIndex INTEGER
  lbOptSMTManufacturerOUI STRING
  lbOptSMTManufacturerData STRING
  lbOptSMTHoldState INTEGER
  lbOptSMTSetCount INTEGER
  lbOptSMTLastSetStationId FddiSMTStationIdType

LbOptMACBridgeFunctionEntry  
SEQUENCE    
  lbOptMACBridgeFunctionSMTIndex INTEGER
  lbOptMACBridgeFunctionMACIndex INTEGER
  lbOptMACBridgeFunctions INTEGER

LbOptMACTPriEntry  
SEQUENCE    
  lbOptMACTPriSMTIndex INTEGER
  lbOptMACTPriMACIndex INTEGER
  lbOptMACTPri0 FddiTimeNano
  lbOptMACTPri1 FddiTimeNano
  lbOptMACTPri2 FddiTimeNano
  lbOptMACTPri3 FddiTimeNano
  lbOptMACTPri4 FddiTimeNano
  lbOptMACTPri5 FddiTimeNano
  lbOptMACTPri6 FddiTimeNano

LbOptPATHRingEntry  
SEQUENCE    
  lbOptPATHRingSMTIndex INTEGER
  lbOptPATHRingPATHIndex INTEGER
  lbOptPATHRingLatency FddiTimeNano
  lbOptPATHTraceStatus INTEGER
  lbOptPATHT-Rmode FddiTimeNano

LbOptPATHSbaEntry  
SEQUENCE    
  lbOptPATHSbaSMTIndex INTEGER
  lbOptPATHSbaPATHIndex INTEGER
  lbOptPATHSbaPayload INTEGER
  lbOptPATHSbaOverhead INTEGER
  lbOptPATHSbaAvailable INTEGER

LbOptPORTEntry  
SEQUENCE    
  lbOptPORTSMTIndex INTEGER
  lbOptPORTIndex INTEGER
  lbOptPORTMACLoopTime FddiTimeNano
  lbOptPORTEBErrorCt Counter

LbOptPORTLSEntry  
SEQUENCE    
  lbOptPORTLSSMTIndex INTEGER
  lbOptPORTLSPORTIndex INTEGER
  lbOptPORTMaintLS INTEGER
  lbOptPORTPCLS INTEGER

Defined Values

a3Com 1.3.6.1.4.1.43
OBJECT IDENTIFIER    

lb3gh 1.3.6.1.4.1.43.7
OBJECT IDENTIFIER    

lb3ghOptFddi 1.3.6.1.4.1.43.7.2
OBJECT IDENTIFIER    

lbOptSMT 1.3.6.1.4.1.43.7.2.1
OBJECT IDENTIFIER    

lbOptMAC 1.3.6.1.4.1.43.7.2.2
OBJECT IDENTIFIER    

lbOptPATH 1.3.6.1.4.1.43.7.2.3
OBJECT IDENTIFIER    

lbOptPORT 1.3.6.1.4.1.43.7.2.4
OBJECT IDENTIFIER    

lbOptSMTTable 1.3.6.1.4.1.43.7.2.1.1
A list of optional SMT entries. The number of entries shall not exceed the value of snmpFddiSMTNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    LbOptSMTEntry

lbOptSMTEntry 1.3.6.1.4.1.43.7.2.1.1.1
An optional SMT entry containing information common to a given optional SMT.
OBJECT-TYPE    
  LbOptSMTEntry  

lbOptSMTIndex 1.3.6.1.4.1.43.7.2.1.1.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER 1..65535  

lbOptSMTManufacturerOUI 1.3.6.1.4.1.43.7.2.1.1.1.2
The three octets of manufacturer data which make up the manufacturerOUI component.
OBJECT-TYPE    
  STRING Size(3)  

lbOptSMTManufacturerData 1.3.6.1.4.1.43.7.2.1.1.1.3
The 29 octets of manufacturer data which make up the manufacturerData component.
OBJECT-TYPE    
  STRING Size(29)  

lbOptSMTHoldState 1.3.6.1.4.1.43.7.2.1.1.1.4
This variable indicates the current state of the Hold function. The value 'not-holding' is the default and initial value. The value must be set to 'not-holding' as part of Active_Actions and when the conditions causing 'holding-prm' or 'holding-sec' are no longer true. The value 'holding-prm' must be set when the condition (notTR_Flag & not RE_Flag & (PC_LS=QLS | LEM_Fail | TNE>NS_Max | (not LS_Flag & TPC > T_Out))) is satisfied in state PC8:ACTIVE for the A Port. The value 'holding-sec' must be set when the condition (notTR_Flag & not RE_Flag & (PC_LS=QLS | LEM_Fail | TNE>NS_Max | (not LS_Flag & TPC > T_Out))) is satisfied in state PC8:ACTIVE for the B Port.
OBJECT-TYPE    
  INTEGER not-implemented(1), not-holding(2), holding-prm(3), holding-sec(4)  

lbOptSMTSetCount 1.3.6.1.4.1.43.7.2.1.1.1.5
This variable is composed of a count incremented in response to a Set operation on the MIB, and the time of the change, however only the count is reported here (refer to ANSI SMT 8.4.1).
OBJECT-TYPE    
  INTEGER  

lbOptSMTLastSetStationId 1.3.6.1.4.1.43.7.2.1.1.1.6
The Station ID of the station that effected the last change in the FDDI MIB.
OBJECT-TYPE    
  FddiSMTStationIdType  

lbOptMACBridgeFunctionTable 1.3.6.1.4.1.43.7.2.2.1
A list of MAC bridge function entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LbOptMACBridgeFunctionEntry

lbOptMACBridgeFunctionEntry 1.3.6.1.4.1.43.7.2.2.1.1
Bridge function information for a given MAC within a given SMT.
OBJECT-TYPE    
  LbOptMACBridgeFunctionEntry  

lbOptMACBridgeFunctionSMTIndex 1.3.6.1.4.1.43.7.2.2.1.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER 1..65535  

lbOptMACBridgeFunctionMACIndex 1.3.6.1.4.1.43.7.2.2.1.1.2
Index variable for uniquely identifying the MAC object instances.
OBJECT-TYPE    
  INTEGER 1..65535  

lbOptMACBridgeFunctions 1.3.6.1.4.1.43.7.2.2.1.1.3
Indicates the MAC's optional bridging functions. The Value -1 is used to indicate that bridging is not supported by this MAC. The value is a sum. This value initially takes the value zero, then for each function present, 2 raised to a power is added to the sum. The powers are according to the following table: Function Power tb 0 -- Transparent bridging active sr 1 -- Src routing active srt 2 -- Src routing transparent active
OBJECT-TYPE    
  INTEGER -1..7  

lbOptMACTPriTable 1.3.6.1.4.1.43.7.2.2.2
A list of MAC T-Pri entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LbOptMACTPriEntry

lbOptMACTPriEntry 1.3.6.1.4.1.43.7.2.2.2.1
A collection of T-Pri information for a given MAC within a given SMT.
OBJECT-TYPE    
  LbOptMACTPriEntry  

lbOptMACTPriSMTIndex 1.3.6.1.4.1.43.7.2.2.2.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER 1..65535  

lbOptMACTPriMACIndex 1.3.6.1.4.1.43.7.2.2.2.1.2
Index variable for uniquely identifying the MAC object instances.
OBJECT-TYPE    
  INTEGER 1..65535  

lbOptMACTPri0 1.3.6.1.4.1.43.7.2.2.2.1.3
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lbOptMACTPri1 1.3.6.1.4.1.43.7.2.2.2.1.4
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lbOptMACTPri2 1.3.6.1.4.1.43.7.2.2.2.1.5
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lbOptMACTPri3 1.3.6.1.4.1.43.7.2.2.2.1.6
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lbOptMACTPri4 1.3.6.1.4.1.43.7.2.2.2.1.7
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lbOptMACTPri5 1.3.6.1.4.1.43.7.2.2.2.1.8
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lbOptMACTPri6 1.3.6.1.4.1.43.7.2.2.2.1.9
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lbOptPATHRingTable 1.3.6.1.4.1.43.7.2.3.1
A list of PATH ring entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LbOptPATHRingEntry

lbOptPATHRingEntry 1.3.6.1.4.1.43.7.2.3.1.1
Ring latency, trace status, and T-Rmode information for a given PATH within a given SMT.
OBJECT-TYPE    
  LbOptPATHRingEntry  

lbOptPATHRingSMTIndex 1.3.6.1.4.1.43.7.2.3.1.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER 1..65535  

lbOptPATHRingPATHIndex 1.3.6.1.4.1.43.7.2.3.1.1.2
Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values 3 to 255.
OBJECT-TYPE    
  INTEGER 1..255  

lbOptPATHRingLatency 1.3.6.1.4.1.43.7.2.3.1.1.3
Gives the total accumulated latency of the ring associated with this path. May be measured directly by the station or calculated by a management station. Values of this object are reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lbOptPATHTraceStatus 1.3.6.1.4.1.43.7.2.3.1.1.4
This attribute indicates the current trace status of the path. The value is a sum which represents all of the trace status information which applies. This value initially takes the value zero, then for each condition which applies, 2 raised to a power is added to the sum. the powers are according to the following table: TraceStatus Power traceinitiated 0 tracepropragated 1 traceterminated 2 tracetimeout 3
OBJECT-TYPE    
  INTEGER 0..15  

lbOptPATHT-Rmode 1.3.6.1.4.1.43.7.2.3.1.1.5
Used by RMT to limit the duration of restricted dialogs on a path. This object is reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lbOptPATHSbaTable 1.3.6.1.4.1.43.7.2.3.2
A list of PATH Sba entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LbOptPATHSbaEntry

lbOptPATHSbaEntry 1.3.6.1.4.1.43.7.2.3.2.1
Sba information for a given PATH within a given SMT.
OBJECT-TYPE    
  LbOptPATHSbaEntry  

lbOptPATHSbaSMTIndex 1.3.6.1.4.1.43.7.2.3.2.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER 1..65535  

lbOptPATHSbaPATHIndex 1.3.6.1.4.1.43.7.2.3.2.1.2
Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values 3 to 255.
OBJECT-TYPE    
  INTEGER 1..255  

lbOptPATHSbaPayload 1.3.6.1.4.1.43.7.2.3.2.1.3
The payload portion of the Synchronous Bandwidth Allocation for thi path. This value represents the maximum number of bytes of data allocated for transmission per 125 microseconds.
OBJECT-TYPE    
  INTEGER 0..1562  

lbOptPATHSbaOverhead 1.3.6.1.4.1.43.7.2.3.2.1.4
The overhead portion of the Synchronous Bandwith Allocation for this path. This value repersents the maximum number of bytes overhead (token capture, frame header, etc.) used pre negotiated Target Token Rotation Time (T_neg).
OBJECT-TYPE    
  INTEGER  

lbOptPATHSbaAvailable 1.3.6.1.4.1.43.7.2.3.2.1.5
This value is the maximum Synchronous Bandwith available for a path in bytes per second.
OBJECT-TYPE    
  INTEGER 0..12500000  

lbOptPORTTable 1.3.6.1.4.1.43.7.2.4.1
A list of optional PORT entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LbOptPORTEntry

lbOptPORTEntry 1.3.6.1.4.1.43.7.2.4.1.1
MAC loop time and EB error count information for a given PORT within a given SMT.
OBJECT-TYPE    
  LbOptPORTEntry  

lbOptPORTSMTIndex 1.3.6.1.4.1.43.7.2.4.1.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER 1..65535  

lbOptPORTIndex 1.3.6.1.4.1.43.7.2.4.1.1.2
Index variable for uniquely identifying the PORT object instances.
OBJECT-TYPE    
  INTEGER 1..65535  

lbOptPORTMACLoopTime 1.3.6.1.4.1.43.7.2.4.1.1.3
This attribute controls the value used for T_Next(9) (see 9.4.4.2.3). This object is reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lbOptPORTEBErrorCt 1.3.6.1.4.1.43.7.2.4.1.1.4
A count that should as closely as possible match the times an Elasticity Buffer Error has occurred while in active line state.
OBJECT-TYPE    
  Counter  

lbOptPORTLSTable 1.3.6.1.4.1.43.7.2.4.2
A list of optional PORT line state entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LbOptPORTLSEntry

lbOptPORTLSEntry 1.3.6.1.4.1.43.7.2.4.2.1
Maintenance line state and PC line state information for a given PORT within a given SMT.
OBJECT-TYPE    
  LbOptPORTLSEntry  

lbOptPORTLSSMTIndex 1.3.6.1.4.1.43.7.2.4.2.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER 1..65535  

lbOptPORTLSPORTIndex 1.3.6.1.4.1.43.7.2.4.2.1.2
Index variable for uniquely identifying the PORT object instances.
OBJECT-TYPE    
  INTEGER 1..65535  

lbOptPORTMaintLS 1.3.6.1.4.1.43.7.2.4.2.1.3
The PORT Maintenance Line State specifies the line state (Maint_LS) to be transmitted when the PCM state machine for the port is in state PC9 Maint.
OBJECT-TYPE    
  INTEGER quiet(1), idle(2), master(3), halt(4), receive-active(5), receive-unknown(6), receive-noise(7)  

lbOptPORTPCLS 1.3.6.1.4.1.43.7.2.4.2.1.4
This attribute indicates the line state (PC_LS) received by the port.
OBJECT-TYPE    
  INTEGER quiet(1), idle(2), master(3), halt(4), receive-active(5), receive-unknown(6), receive-noise(7)