LEXMARK-PVT-MIB

File: LEXMARK-PVT-MIB.mib (66851 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

enterprises Gauge IpAddress
DisplayString PhysAddress OBJECT-TYPE
TRAP-TYPE

Defined Types

OpsysCurrentJobEntry  
SEQUENCE    
  opsysCurrentJobEntryIndex INTEGER
  opsysCurrentJobString DisplayString

LexipxPortInfoEntry  
SEQUENCE    
  lexipxPortInfoIndex INTEGER
  lexipxPortInfoPollIntvl INTEGER
  lexipxPortInfoEnable INTEGER
  lexipxPortInfoBannerPage INTEGER

LexipxPrefSrvrEntry  
SEQUENCE    
  lexipxPrefSrvrIndex INTEGER
  lexipxPrefSrvrName DisplayString

LexipxConnSrvrEntry  
SEQUENCE    
  lexipxConnSrvrIndex INTEGER
  lexipxConnSrvrName DisplayString
  lexipxConnSrvrNet DisplayString
  lexipxConnSrvrNode DisplayString
  lexipxConnSrvrConnNum INTEGER
  lexipxConnSrvrConnId INTEGER
  lexipxConnSrvrPSConnID INTEGER

LexipxTrapEntry  
SEQUENCE    
  lexipxTrapIndex INTEGER
  lexipxTrapMask INTEGER
  lexipxTrapNetworkAddress STRING
  lexipxTrapNodeAddress STRING

LextcpNPAPserversEntry  
SEQUENCE    
  lextcpNPAPserverIndex INTEGER
  lextcpNPAPserverAddress IpAddress

LexhttpLinkTableEntry  
SEQUENCE    
  lexhttpLinkTableIndex INTEGER
  lexhttpLinkTableStatus INTEGER
  lexhttpLinkTableLabel DisplayString
  lexhttpLinkTableURL DisplayString

LexhdwrPortTableEntry  
SEQUENCE    
  lexhdwrPortTableIndex INTEGER
  lexhdwrPortTableType INTEGER
  lexhdwrPortTableParm1 INTEGER
  lexhdwrPortTableParm2 INTEGER
  lexhdwrPortTableParm3 INTEGER
  lexhdwrPortTableParm4 INTEGER
  lexhdwrPortTableParm5 INTEGER
  lexhdwrPortTableParm6 INTEGER
  lexhdwrPortTableParm7 INTEGER
  lexhdwrPortTableParm8 INTEGER
  lexhdwrPortTableParm9 INTEGER

LextrapDestEntry  
SEQUENCE    
  lextrapDestIndex INTEGER
  lextrapDestIPAddr IpAddress
  lextrapDestMask INTEGER

PrtgenInfoEntry  
SEQUENCE    
  prtgenPrinterIndex INTEGER
  prtgenPrinterName DisplayString
  prtgenPeripheralID DisplayString
  prtgenCodeRevision DisplayString
  prtgenResValue INTEGER
  prtgenSerialNo DisplayString

PrtgenStatusEntry  
SEQUENCE    
  prtgenStatPrinterIndex INTEGER
  prtgenStatusIRC INTEGER
  prtgenStatusOutHopFull INTEGER
  prtgenStatusInputEmpty INTEGER
  prtgenStatusPaperJam INTEGER
  prtgenStatusTonerError INTEGER
  prtgenStatusSrvcReqd INTEGER
  prtgenStatusDiskError INTEGER
  prtgenStatusCoverOpen INTEGER
  prtgenStatusPageComplex INTEGER
  prtgenStatusLineStatus INTEGER
  prtgenStatusBusy INTEGER
  prtgenStatusWaiting INTEGER
  prtgenStatusWarming INTEGER
  prtgenStatusPrinting INTEGER

FaxEntry  
SEQUENCE    
  faxIndex INTEGER
  faxPort INTEGER
  faxAdapterCapabilities INTEGER
  faxModemCapabilities INTEGER
  faxSelectedCapabilities INTEGER
  faxActiveCapabilities INTEGER
  faxIDString DisplayString
  faxInitString DisplayString
  faxNumberRings INTEGER
  faxScaling INTEGER
  faxBinaryEncoding INTEGER
  faxPrinterPort INTEGER
  faxInputTray INTEGER
  faxOutputBin INTEGER

Defined Values

lexmark 1.3.6.1.4.1.641
OBJECT IDENTIFIER    

adapter 1.3.6.1.4.1.641.1
OBJECT IDENTIFIER    

printer 1.3.6.1.4.1.641.2
OBJECT IDENTIFIER    

attachment 1.3.6.1.4.1.641.3
OBJECT IDENTIFIER    

opsys 1.3.6.1.4.1.641.1.1
OBJECT IDENTIFIER    


lexipx 1.3.6.1.4.1.641.1.3
OBJECT IDENTIFIER    

lextalk 1.3.6.1.4.1.641.1.4
OBJECT IDENTIFIER    

lextcp 1.3.6.1.4.1.641.1.5
OBJECT IDENTIFIER    

lexhttp 1.3.6.1.4.1.641.1.5.6
OBJECT IDENTIFIER    

lexdhcp 1.3.6.1.4.1.641.1.5.7
OBJECT IDENTIFIER    

lexhdwr 1.3.6.1.4.1.641.1.6
OBJECT IDENTIFIER    

lexmac 1.3.6.1.4.1.641.1.7
OBJECT IDENTIFIER    

lextrap 1.3.6.1.4.1.641.1.8
OBJECT IDENTIFIER    

time 1.3.6.1.4.1.641.1.9
OBJECT IDENTIFIER    

prtgen 1.3.6.1.4.1.641.2.1
OBJECT IDENTIFIER    

fax 1.3.6.1.4.1.641.3.1
OBJECT IDENTIFIER    

opsysCodeRev 1.3.6.1.4.1.641.1.1.1
A textual identification of network adapter's firmware revision level. For example: 7.15.1
OBJECT-TYPE    
  DisplayString Size(0..255)  

opsysJobTimeout 1.3.6.1.4.1.641.1.1.2
The adapter job timeout period in seconds.
OBJECT-TYPE    
  INTEGER 10..255  

opsysCurrentJob 1.3.6.1.4.1.641.1.1.3
A textual description of the currently printing job containing the Source NOS, Source server, Source user, Job number, and Job size, separated by CR LF. A NULL string indicates no active job. For multiport adapters, this reflects job status of printer port 1.
OBJECT-TYPE    
  DisplayString Size(0..255)  

opsysRAMSize 1.3.6.1.4.1.641.1.1.4
The size of the network adapter's RAM in bytes.
OBJECT-TYPE    
  INTEGER  

opsysNVRAMSize 1.3.6.1.4.1.641.1.1.5
The size of the network adapter's NVRAM in bytes.
OBJECT-TYPE    
  INTEGER  

opsysROMSize 1.3.6.1.4.1.641.1.1.6
The size of the network adapter's ROM in bytes.
OBJECT-TYPE    
  INTEGER  

opsysROMType 1.3.6.1.4.1.641.1.1.7
A textual description of the network adapter's ROM technology. Currently valid types are: MASK_ROM, OTP, FLASH, UV_EPROM, EEPROM, and OTHER.
OBJECT-TYPE    
  DisplayString Size(0..255)  

opsysProtocols 1.3.6.1.4.1.641.1.1.8
A bitmap representing the protocols supported by the network adapter. Bit Value Protocol --- ----- ---------- 0 1 LexLink 1 2 Netware 2 4 AppleTalk 3 8 TCP/IP 4 16 reserved 5 32 reserved 6 64 NDS
OBJECT-TYPE    
  INTEGER 0..65535  

opsysTimeToReset 1.3.6.1.4.1.641.1.1.9
The amount of time remaining until the adapter performs a power on reset. A value of -1 indicates no reset is scheduled. Setting to 0 causes the adapter to reset immediately. The only valid set value is 0.
OBJECT-TYPE    
  INTEGER  

opsysCardPartNo 1.3.6.1.4.1.641.1.1.10
A textual representation of the network adapter's part number.
OBJECT-TYPE    
  DisplayString Size(0..255)  

opsysCardEC 1.3.6.1.4.1.641.1.1.11
A textual representation of the network adapter's EC level.
OBJECT-TYPE    
  DisplayString Size(0..255)  

opsysCurrentJobTable 1.3.6.1.4.1.641.1.1.12
A table of current job information for each of the network adapter's printer ports.
OBJECT-TYPE    
  SEQUENCE OF  
    OpsysCurrentJobEntry

opsysCurrentJobEntry 1.3.6.1.4.1.641.1.1.12.1
An entry containing job information for one printer port.
OBJECT-TYPE    
  OpsysCurrentJobEntry  

opsysCurrentJobEntryIndex 1.3.6.1.4.1.641.1.1.12.1.1
A unique value used by the adapter to identify job information for one printer port. Each entry corresponds to a value lexhdwrPortTableIndex.
OBJECT-TYPE    
  INTEGER  

opsysCurrentJobString 1.3.6.1.4.1.641.1.1.12.1.2
A textual description of the this printer port's currently printing job containing the Source NOS, Source server, Source user, Job number, and Job size, separated by CR LF. A NULL string indicates no active job.
OBJECT-TYPE    
  DisplayString Size(0..255)  

opsysDeviceType 1.3.6.1.4.1.641.1.1.13
A two byte code representing the adapter's type.
OBJECT-TYPE    
  STRING Size(2)  

opsysAdapterName 1.3.6.1.4.1.641.1.1.14
A Unicode representation of the adapter's name.
OBJECT-TYPE    
  STRING Size(64)  

opsysAdapterCapabilities 1.3.6.1.4.1.641.1.1.15
A bitmap representing the capabilities of the adapter. Bit Value Frame type --- ---------- -------------------------- 31 0x80000000 NPANT via Netware and IP 30 0x40000000 Receive-only Fax 29 0x20000000 reserved 28 0x10000000 Adapter HTTP 27 0x08000000 Printer HTTP 26 0x04000000 HTTP Configuration Page 25 0x02000000 Copier Option
OBJECT-TYPE    
  STRING Size(4)  

lexlinkActivated 1.3.6.1.4.1.641.1.2.1
The activation status of the LexLink protocol. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

lexlinkNickname 1.3.6.1.4.1.641.1.2.2
The nickname assigned to the adapter for the LexLink protocol. Note that some adapters may not support the maximum length.
OBJECT-TYPE    
  DisplayString Size(0..24)  

lexipxActivated 1.3.6.1.4.1.641.1.3.1
The activation status of the Netware protocol. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

lexipxLoginName 1.3.6.1.4.1.641.1.3.2
The adapter's Netware login name. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset.
OBJECT-TYPE    
  DisplayString Size(0..43)  

lexipxNetNumber 1.3.6.1.4.1.641.1.3.3
The network number of the Netware network to which the adapter is connected.
OBJECT-TYPE    
  DisplayString Size(8)  

lexipxSAPMode 1.3.6.1.4.1.641.1.3.4
The network adapter's current Netware SAP'ing status.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

lexipxServerMode 1.3.6.1.4.1.641.1.3.5
The current Netware server mode of the adapter. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset.
OBJECT-TYPE    
  INTEGER pserver(1), rprinter(2)  

lexipxNumPorts 1.3.6.1.4.1.641.1.3.6
The number of Netware printer ports.
OBJECT-TYPE    
  INTEGER  

lexipxPortInfoTable 1.3.6.1.4.1.641.1.3.7
A table of Netware printer port information.
OBJECT-TYPE    
  SEQUENCE OF  
    LexipxPortInfoEntry

lexipxPortInfoEntry 1.3.6.1.4.1.641.1.3.7.1
An entry containing Netware printer port information.
OBJECT-TYPE    
  LexipxPortInfoEntry  

lexipxPortInfoIndex 1.3.6.1.4.1.641.1.3.7.1.1
A unique value used by the adapter to identify Netware printer ports.
OBJECT-TYPE    
  INTEGER  

lexipxPortInfoPollIntvl 1.3.6.1.4.1.641.1.3.7.1.2
The Netware queue polling interval for this printer port.
OBJECT-TYPE    
  INTEGER 1..16383  

lexipxPortInfoEnable 1.3.6.1.4.1.641.1.3.7.1.3
The Netware queue status of this printer port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

lexipxPortInfoBannerPage 1.3.6.1.4.1.641.1.3.7.1.4
The Netware queue banner page status for this printer port.
OBJECT-TYPE    
  INTEGER off(1), postscript(2), ascii(3)  

lexipxNumPrefServers 1.3.6.1.4.1.641.1.3.8
The maximum number of preferred Netware servers supported by this network adapter.
OBJECT-TYPE    
  INTEGER  

lexipxPrefSrvrTable 1.3.6.1.4.1.641.1.3.9
A table of the network adapter's preferred Netware servers.
OBJECT-TYPE    
  SEQUENCE OF  
    LexipxPrefSrvrEntry

lexipxPrefSrvrEntry 1.3.6.1.4.1.641.1.3.9.1
An entry containing preferred Netware server information.
OBJECT-TYPE    
  LexipxPrefSrvrEntry  

lexipxPrefSrvrIndex 1.3.6.1.4.1.641.1.3.9.1.1
A unique value used by the adapter to identify preferred Netware servers.
OBJECT-TYPE    
  INTEGER  

lexipxPrefSrvrName 1.3.6.1.4.1.641.1.3.9.1.2
The name of this preferred Netware server. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset.
OBJECT-TYPE    
  DisplayString Size(0..47)  

lexipxConnSrvrTable 1.3.6.1.4.1.641.1.3.10
A table of connected Netware server information.
OBJECT-TYPE    
  SEQUENCE OF  
    LexipxConnSrvrEntry

lexipxConnSrvrEntry 1.3.6.1.4.1.641.1.3.10.1
An entry containing connected Netware server information.
OBJECT-TYPE    
  LexipxConnSrvrEntry  

lexipxConnSrvrIndex 1.3.6.1.4.1.641.1.3.10.1.1
A unique value used by the adapter to identify connected Netware servers.
OBJECT-TYPE    
  INTEGER  

lexipxConnSrvrName 1.3.6.1.4.1.641.1.3.10.1.2
The name of this connected Netware server.
OBJECT-TYPE    
  DisplayString Size(0..255)  

lexipxConnSrvrNet 1.3.6.1.4.1.641.1.3.10.1.3
The Netware network number of this connected Netware server.
OBJECT-TYPE    
  DisplayString Size(8)  

lexipxConnSrvrNode 1.3.6.1.4.1.641.1.3.10.1.4
The Netware node address of the connected Netware server.
OBJECT-TYPE    
  DisplayString Size(12)  

lexipxConnSrvrConnNum 1.3.6.1.4.1.641.1.3.10.1.5
The connection number of the connected Netware server (pserver mode only).
OBJECT-TYPE    
  INTEGER 0..65535  

lexipxConnSrvrConnId 1.3.6.1.4.1.641.1.3.10.1.6
The connection ID of the connected Netware server (rprinter mode only).
OBJECT-TYPE    
  INTEGER 0..65535  

lexipxConnSrvrPSConnID 1.3.6.1.4.1.641.1.3.10.1.7
The connection ID of the connected Netware pserver (rprinter mode only).
OBJECT-TYPE    
  INTEGER 0..65535  

lexipxFrameType 1.3.6.1.4.1.641.1.3.11
A bitmap of the supported IPX frame types. Bit Value Frame type --- ----- -------------------------- 0 1 Token-Ring 1 2 Token-Ring Source Routed 2 4 Token-Ring SNAP 3 8 Token-Ring SNAP Source Routed 4 16 Ethernet 802.2 5 32 Ethernet 802.3 6 64 Ethernet Type 2 7 128 Ethernet SNAP
OBJECT-TYPE    
  INTEGER 0..255  

lexipxTrapTable 1.3.6.1.4.1.641.1.3.12
A table of IPX trap destination configurations.
OBJECT-TYPE    
  SEQUENCE OF  
    LexipxTrapEntry

lexipxTrapEntry 1.3.6.1.4.1.641.1.3.12.1
An entry containing an IPX trap destination's configuration.
OBJECT-TYPE    
  LexipxTrapEntry  

lexipxTrapIndex 1.3.6.1.4.1.641.1.3.12.1.1
A unique value used by the adapter to identify IPX trap destinations.
OBJECT-TYPE    
  INTEGER  

lexipxTrapMask 1.3.6.1.4.1.641.1.3.12.1.2
The trap mask for the trap destination. It is implemented as a bitmap specifying a mask of intervention required conditions for which the adapter should send trap messages. Setting a bit to 1 enables the corresponding trap. A value of 511 will cause the adapter to send traps for all intervention required conditions. The bitmap is defined below: Bit Value Condition --- ----- -------------------------- 0 1 Output hopper full 1 2 Load Paper 2 4 Paper Jam 3 8 Toner Low 4 16 Service Required 5 32 Disk Error 6 64 Cover Opened 7 128 Page Complexity Error 8 256 Offline
OBJECT-TYPE    
  INTEGER 0..65535  

lexipxTrapNetworkAddress 1.3.6.1.4.1.641.1.3.12.1.3
The IPX network address of the trap destination. (4 bytes)
OBJECT-TYPE    
  STRING Size(4)  

lexipxTrapNodeAddress 1.3.6.1.4.1.641.1.3.12.1.4
The IPX node address of the trap destination. (6 bytes)
OBJECT-TYPE    
  STRING Size(6)  

lexipxTrapType 1.3.6.1.4.1.641.1.3.13
The type of SNMP over IPX traps that will be sent by the adapter. Setting this variable to multiplexed(1) configures all intervention required conditions to send an irCondition trap (specific trap number 1) and for the clearing of intervention required conditions to send an irCleared trap (specific trap number 0). Setting this variable to individual(2) causes each intervention required condition to send its corresponding trap (specific traps numbered 2 through 10) and for the clearing of intervention required conditions to cause an irClearedTypeII trap (specific trap number 11). See the Trap Definitions Group for more information. Individual(2) is the default for IPX and is necessary for NMS annotations.
OBJECT-TYPE    
  INTEGER multiplexed(1), individual(2)  

lexipxGSQ 1.3.6.1.4.1.641.1.3.14
The General Service Query (GSQ) interval. This is the period in seconds that the adapter waits after a failed GSQ before attempting another as it searches for Netware servers.
OBJECT-TYPE    
  INTEGER 5..600  

lextalkActivated 1.3.6.1.4.1.641.1.4.1
The activation status of the AppleTalk protocol. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

lextalkAddress 1.3.6.1.4.1.641.1.4.2
The AppleTalk Address of the network card. This variable is not implemented on the XLe adapters.
OBJECT-TYPE    
  DisplayString Size(0..9)  

lextalkName 1.3.6.1.4.1.641.1.4.3
The AppleTalk name of this adapter. This variable is not implemented on the XLe adapters.
OBJECT-TYPE    
  DisplayString Size(0..32)  

lextalkZone 1.3.6.1.4.1.641.1.4.4
The AppleTalk zone name of this adapter. This variable is not implemented on the XLe adapters.
OBJECT-TYPE    
  DisplayString Size(0..32)  

lextalkType 1.3.6.1.4.1.641.1.4.5
The AppleTalk type of this adapter. This variable is not implemented on the XLe adapters.
OBJECT-TYPE    
  DisplayString Size(0..32)  

lextcpActivated 1.3.6.1.4.1.641.1.5.1
The activation status of the TCP/IP Protocol. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

lextcpBootpEnable 1.3.6.1.4.1.641.1.5.2
The status of whether or not BOOTP is attempted to determine the IP parameters. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

lextcpAddressServ 1.3.6.1.4.1.641.1.5.3
The IP address of the DHCP, BOOTP, or RARP server that provided the adapter's IP address.
OBJECT-TYPE    
  IpAddress  

lextcpNumNPAPservers 1.3.6.1.4.1.641.1.5.4
The maximum number of concurrent NPAP over TCP server connections.
OBJECT-TYPE    
  INTEGER  

lextcpNPAPserversTable 1.3.6.1.4.1.641.1.5.5
A table of NPAP over TCP server information.
OBJECT-TYPE    
  SEQUENCE OF  
    LextcpNPAPserversEntry

lextcpNPAPserversEntry 1.3.6.1.4.1.641.1.5.5.1
An entry containing NPAP over TCP server information.
OBJECT-TYPE    
  LextcpNPAPserversEntry  

lextcpNPAPserverIndex 1.3.6.1.4.1.641.1.5.5.1.1
A unique value used by the adapter to identify NPAP over TCP servers.
OBJECT-TYPE    
  INTEGER  

lextcpNPAPserverAddress 1.3.6.1.4.1.641.1.5.5.1.2
The IP address of this NPAP over TCP server.
OBJECT-TYPE    
  IpAddress  

lexhttpEnable 1.3.6.1.4.1.641.1.5.6.1
The status of whether the adapter will enable the HTTP server. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  


lexhttpBytesRemaining 1.3.6.1.4.1.641.1.5.6.3
The number of bytes available to store HTTP link and label information.
OBJECT-TYPE    
  INTEGER 0..65535  


lexhttpLinkTable 1.3.6.1.4.1.641.1.5.6.5
A table of HTTP Link settings.
OBJECT-TYPE    
  SEQUENCE OF  
    LexhttpLinkTableEntry

lexhttpLinkTableEntry 1.3.6.1.4.1.641.1.5.6.5.1
An entry containing HTTP link settings.
OBJECT-TYPE    
  LexhttpLinkTableEntry  

lexhttpLinkTableIndex 1.3.6.1.4.1.641.1.5.6.5.1.1
A unique value used by the adapter to identify HTTP link settings.
OBJECT-TYPE    
  INTEGER 0..65535  

lexhttpLinkTableStatus 1.3.6.1.4.1.641.1.5.6.5.1.2
The status of the HTTP link. Get operation: linkOff -- Server will not display the link personalOn -- Server will display the custom link useDefault -- Write-only defaultOff -- Reserved defaultOn -- Server will display the default link eraseCustom -- Write-only Set operation: linkOff -- Puts the link in linkOff status customOn -- Puts the link in customOn status useDefault -- Clears the Label and URL for this link and puts the . link in defaultOn status defaultOff -- Read-only defaultOn -- Read-only eraseCustom -- Clears the Label and URL for this link and puts the . link in linkOff status
OBJECT-TYPE    
  INTEGER linkOff(1), customOn(2), useDefault(3), defaultOff(4), defaultOn(5), eraseCustom(6)  

lexhttpLinkTableLabel 1.3.6.1.4.1.641.1.5.6.5.1.3
The text to be displayed as the label of this HTTP link. It may be set to define a custom link. Note that when read, this always reflects what the server would display. As such, if the status of this link is defaultOn, it will not return your custom label if read even though it has been stored. Setting the status for this link to customOn will activate your custom link label. Remember that setting the status of this link to eraseCustom or useDefault clears this variable.
OBJECT-TYPE    
  DisplayString Size(0..255)  

lexhttpLinkTableURL 1.3.6.1.4.1.641.1.5.6.5.1.4
The URL to be hyperlinked to by the HTTP link. It may be set to define a custom link. Note that when read, this always reflects what the server would use. As such, if the status of this link is defaultOn, it will not return your custom URL if read even though it has been stored. Setting the status for this link to customOn will activate your custom link URL. Remember that setting the status of this link to eraseCustom or useDefault clears this variable.
OBJECT-TYPE    
  DisplayString Size(0..255)  

lexhttpConfigEnable 1.3.6.1.4.1.641.1.5.6.6
The status of whether HTTP configuration page is enabled.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

lexdhcpDhcpEnable 1.3.6.1.4.1.641.1.5.7.1
The status of whether DHCP is enabled.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

lexdhcpRarpEnable 1.3.6.1.4.1.641.1.5.7.2
The status of whether RARP is enabled.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

lexdhcpAddressSource 1.3.6.1.4.1.641.1.5.7.3
The method by which the current IP parameters were obtained.
OBJECT-TYPE    
  INTEGER manual(1), dhcp(2), bootp(3), rarp(4)  

lexdhcpWinsStatus 1.3.6.1.4.1.641.1.5.7.4
The adapter's WINS server registration status.
OBJECT-TYPE    
  INTEGER unregistered(1), registered(2), pending(3), rejected(4)  

lexdhcpWinsServer 1.3.6.1.4.1.641.1.5.7.5
The IP address of the WINS server.
OBJECT-TYPE    
  IpAddress  

lexdhcpHostname 1.3.6.1.4.1.641.1.5.7.6
The adapter's TCP/IP hostname.
OBJECT-TYPE    
  DisplayString Size(0..15)  

lexdhcpLeaseLength 1.3.6.1.4.1.641.1.5.7.7
The length of the adapter's DHCP address lease in seconds.
OBJECT-TYPE    
  INTEGER  

lexdhcpTimetoExpire 1.3.6.1.4.1.641.1.5.7.8
The number of seconds until the DHCP address lease expires.
OBJECT-TYPE    
  INTEGER  

lexdhcpDNSServer 1.3.6.1.4.1.641.1.5.7.9
The IP address of the DNS server.
OBJECT-TYPE    
  IpAddress  

lexhdwrNumPorts 1.3.6.1.4.1.641.1.6.1
The number of printer ports supported by this network adapter.
OBJECT-TYPE    
  INTEGER 0..65535  

lexhdwrPortTable 1.3.6.1.4.1.641.1.6.2
A table of the adapter's printer port hardware settings.
OBJECT-TYPE    
  SEQUENCE OF  
    LexhdwrPortTableEntry

lexhdwrPortTableEntry 1.3.6.1.4.1.641.1.6.2.1
An entry containing printer port hardware settings.
OBJECT-TYPE    
  LexhdwrPortTableEntry  

lexhdwrPortTableIndex 1.3.6.1.4.1.641.1.6.2.1.1
A unique value used by the adapter to identify printer ports.
OBJECT-TYPE    
  INTEGER  

lexhdwrPortTableType 1.3.6.1.4.1.641.1.6.2.1.2
The type of attachment for this printer port.
OBJECT-TYPE    
  INTEGER internal(1), parallel(2), serial(3)  

lexhdwrPortTableParm1 1.3.6.1.4.1.641.1.6.2.1.3
For serial and parallel ports, this is the port timeout in seconds. For internal ports, this parameter is unused.
OBJECT-TYPE    
  INTEGER  

lexhdwrPortTableParm2 1.3.6.1.4.1.641.1.6.2.1.4
For serial ports, this is the baud rate in bits per second. For parallel ports, this is the port mode and is defined as follows: standard(0), enhanced(1) For internal ports, this parameter is unused.
OBJECT-TYPE    
  INTEGER  

lexhdwrPortTableParm3 1.3.6.1.4.1.641.1.6.2.1.5
For serial ports, this is the parity and is defined as follows: none(0), odd(1), even(2), space(3), mark(4) For parallel and internal ports, this parameter is unused.
OBJECT-TYPE    
  INTEGER  

lexhdwrPortTableParm4 1.3.6.1.4.1.641.1.6.2.1.6
For serial ports, this is the number of data bits. For parallel and internal ports, this parameter is unused.
OBJECT-TYPE    
  INTEGER  

lexhdwrPortTableParm5 1.3.6.1.4.1.641.1.6.2.1.7
For serial ports, this is the number of stop bits and is defined as follows: bitsOne(2), bitsOneAndHalf(3), bitsTwo(4) For parallel and internal ports, this parameter is unused.
OBJECT-TYPE    
  INTEGER  

lexhdwrPortTableParm6 1.3.6.1.4.1.641.1.6.2.1.8
For serial ports, this is the pacing mode and is defined as follows: paceDtr(0), paceXonXff(1) For non XLe parallel ports, this is the parallel protocol and is defined as follows: auto(2), ecp(3), byte(4), nibble(5), compatible(6) For internal ports, and XLe parallel ports this parameter is unused.
OBJECT-TYPE    
  INTEGER  

lexhdwrPortTableParm7 1.3.6.1.4.1.641.1.6.2.1.9
For all ports, this is the configured NPAP mode.
OBJECT-TYPE    
  INTEGER off(1), on(2), auto(3)  

lexhdwrPortTableParm8 1.3.6.1.4.1.641.1.6.2.1.10
For all ports, this is the NPAP status.
OBJECT-TYPE    
  INTEGER npapInactive(1), npapActive(2)  

lexhdwrPortTableParm9 1.3.6.1.4.1.641.1.6.2.1.11
For serial ports, this is the class of device attached. This variable is unused on the XLe adapters.
OBJECT-TYPE    
  INTEGER printer(1), fax(2)  

lexmacType 1.3.6.1.4.1.641.1.7.1
A textual representation of network medium to which the network adapter is attached (e.g. Ethernet).
OBJECT-TYPE    
  DisplayString Size(0..255)  

lexmacSpeed 1.3.6.1.4.1.641.1.7.2
The speed, in bits per second, of the network medium to which the network adapter is attached.
OBJECT-TYPE    
  Gauge  

lexmacConnType 1.3.6.1.4.1.641.1.7.3
The connection type by which the network adapter is connected to the network medium.
OBJECT-TYPE    
  INTEGER aui(1), bnc(2), stp(3), utp(4)  

lexmacUAA 1.3.6.1.4.1.641.1.7.4
The network adapter's universally administered network address.
OBJECT-TYPE    
  PhysAddress  

lexmacLAA 1.3.6.1.4.1.641.1.7.5
The network adapter's locally administered network address. A value of all zeros indicates that the LAA is not in use.
OBJECT-TYPE    
  PhysAddress  

lextrapDestNum 1.3.6.1.4.1.641.1.8.1
The maximum number of IP trap destinations supported by this network adapter.
OBJECT-TYPE    
  INTEGER  

lextrapDestTable 1.3.6.1.4.1.641.1.8.2
A table of IP trap destination configurations.
OBJECT-TYPE    
  SEQUENCE OF  
    LextrapDestEntry

lextrapDestEntry 1.3.6.1.4.1.641.1.8.2.1
An entry containing an IP trap destination configuration.
OBJECT-TYPE    
  LextrapDestEntry  

lextrapDestIndex 1.3.6.1.4.1.641.1.8.2.1.1
A unique value used by the adapter to identify IP trap destinations.
OBJECT-TYPE    
  INTEGER  

lextrapDestIPAddr 1.3.6.1.4.1.641.1.8.2.1.2
The IP address of the trap destination.
OBJECT-TYPE    
  IpAddress  

lextrapDestMask 1.3.6.1.4.1.641.1.8.2.1.3
The trap mask for the trap destination. It is implemented as a bitmap specifying a mask of intervention required conditions for which the adapter should send trap messages. Setting a bit to 1 enables the corresponding trap. A value of 1023 will cause the adapter to send traps for all intervention required conditions. The bitmap is defined below: Bit Value Condition --- ----- -------------------------- 0 1 Output hopper full 1 2 Load Paper 2 4 Paper Jam 3 8 Toner Low 4 16 Service Required 5 32 Disk Error 6 64 Cover Opened 7 128 Page Complexity Error 8 256 Offline 9 512 Printer MIB (RFC 1759)
OBJECT-TYPE    
  INTEGER 0..65535  

lextrapIPTrapType 1.3.6.1.4.1.641.1.8.3
The type of SNMP over IP traps that will be sent by the adapter. Setting this variable to multiplexed(1) configures all intervention required conditions to send an irCondition trap (specific trap number 1) and for the clearing of intervention required conditions to send an irCleared trap (specific trap number 0). Setting this variable to individual(2) causes each intervention required condition to send its corresponding trap (specific traps numbered 2 through 10) and for the clearing of intervention required conditions to cause an irClearedTypeII trap (specific trap number 11). See the Trap Definitions Group for more information. Type 1 is the default for IP.
OBJECT-TYPE    
  INTEGER multiplexed(1), individual(2)  

timeReset 1.3.6.1.4.1.641.1.9.1
A control for initiating an update of the system time and date using the specified timeSource. Setting the variable to reset will cause the system to update it's time and date using the specified time source. See timeSource.
OBJECT-TYPE    
  INTEGER noReset(1), reset(2)  

timeSource 1.3.6.1.4.1.641.1.9.2
The source for setting the system time and date. If this variable is changed, the time must be reset before the change will have an effect. See timeReset.
OBJECT-TYPE    
  INTEGER none(1), ntp(2), netware(3)  

timeUTCOffset 1.3.6.1.4.1.641.1.9.3
The offset in minutes from UTC (formerly GMT) of local time. Use a negative value if West of UTC. Use a positive value if East of UTC.
OBJECT-TYPE    
  INTEGER -720..720  

timeDSTEnable 1.3.6.1.4.1.641.1.9.4
The status of whether automatic Daylight Savings Time adjust is enabled. See timeDSTStartDate, timeDSTEndDate, and timeDSTOffset for configuration options.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

timeDSTStartDate 1.3.6.1.4.1.641.1.9.5
A textual representation of the day and time the Daylight Savings Time adjust should start if enabled (see timeDSTEnable). The format of string is as follows: Byte Meaning ---- ------------------------------------------------------------ 0 Which occurence in the month of the day specified in byte 1. Valid values are: F => First Occurence 1 => First Occurence 2 => Second Occurence 3 => Third Occurence 4 => Fourth Occurence 5 => Fifth Occurence L => Last Occurence 1 A 1-digit field indicating the day of week (0=Sun..6=Sat) 2-3 A 2-digit field indicating the month. 4-5 A 2-digit field indicating the hour 6-7 A 2-digit field indicating the minute 8-9 A 2-digit field indicating the second The default setting is F004020000 which corresponds to the first Sunday of April at 2:00:00 am.
OBJECT-TYPE    
  STRING Size(11)  

timeDSTEndDate 1.3.6.1.4.1.641.1.9.6
A textual representation of the day and time the Daylight Savings Time adjust should end if enabled (see timeDSTEnable). The format of string is as defined for timeDSTStartDate The default setting is L010020000 which corresponds to the last Sunday of October at 2:00:00 am.
OBJECT-TYPE    
  STRING Size(11)  

timeDSTOffset 1.3.6.1.4.1.641.1.9.7
The offset in minutes that should be applied to local time during Daylight Savings Time.
OBJECT-TYPE    
  INTEGER 0..120  

timeServerAddress 1.3.6.1.4.1.641.1.9.8
If the specified time source is NTP (see timeSource), this is the IP address of the NTP server to use. Otherwise, the value is ignored.
OBJECT-TYPE    
  IpAddress  

timeServerName 1.3.6.1.4.1.641.1.9.9
If the specified time source is NTP (see timeSource), and the NTP server address is not set (0.0.0.0), this is the DNS domainname of the NTP server. If the specified time source is Netware (see timeSource), the is the name of Netware server. Otherwise, the value is ignored.
OBJECT-TYPE    
  DisplayString Size(0..63)  

prtgenNumber 1.3.6.1.4.1.641.2.1.1
The number of printers, regardless of their current state, available to this adapter.
OBJECT-TYPE    
  INTEGER  

prtgenInfoTable 1.3.6.1.4.1.641.2.1.2
A table of the network adapter's attached printer information.
OBJECT-TYPE    
  SEQUENCE OF  
    PrtgenInfoEntry

prtgenInfoEntry 1.3.6.1.4.1.641.2.1.2.1
An entry containing attached printer information.
OBJECT-TYPE    
  PrtgenInfoEntry  

prtgenPrinterIndex 1.3.6.1.4.1.641.2.1.2.1.1
A unique value used by the network adapter to identify attached printers.
OBJECT-TYPE    
  INTEGER  

prtgenPrinterName 1.3.6.1.4.1.641.2.1.2.1.2
A textual description of the make and model of the attached printer, if known.
OBJECT-TYPE    
  DisplayString Size(0..255)  

prtgenPeripheralID 1.3.6.1.4.1.641.2.1.2.1.3
A textual description of the peripheral ID of the attached printer as defined by the IEEE 1284 standard, if known.
OBJECT-TYPE    
  DisplayString Size(0..255)  

prtgenCodeRevision 1.3.6.1.4.1.641.2.1.2.1.4
A textual representation of the code revision level of the attached printer, if known.
OBJECT-TYPE    
  DisplayString Size(0..255)  

prtgenResValue 1.3.6.1.4.1.641.2.1.2.1.5
This object is currently unused and reserved.
OBJECT-TYPE    
  INTEGER  

prtgenSerialNo 1.3.6.1.4.1.641.2.1.2.1.6
A textual representation of the serial number of the attached printer, if known.
OBJECT-TYPE    
  DisplayString Size(0..255)  

prtgenStatusTable 1.3.6.1.4.1.641.2.1.3
A table of the network adapter's attached printer status.
OBJECT-TYPE    
  SEQUENCE OF  
    PrtgenStatusEntry

prtgenStatusEntry 1.3.6.1.4.1.641.2.1.3.1
An entry containing attached printer status.
OBJECT-TYPE    
  PrtgenStatusEntry  

prtgenStatPrinterIndex 1.3.6.1.4.1.641.2.1.3.1.1
A unique value used by the network adapter to identify attached printers.
OBJECT-TYPE    
  INTEGER  

prtgenStatusIRC 1.3.6.1.4.1.641.2.1.3.1.2
The printer's current intervention required code.
OBJECT-TYPE    
  INTEGER  

prtgenStatusOutHopFull 1.3.6.1.4.1.641.2.1.3.1.3
The printer's current output hopper status.
OBJECT-TYPE    
  INTEGER notFull(1), full(2), unknown(3)  

prtgenStatusInputEmpty 1.3.6.1.4.1.641.2.1.3.1.4
The printer's current active input paper tray status.
OBJECT-TYPE    
  INTEGER notEmpty(1), empty(2), unknown(3)  

prtgenStatusPaperJam 1.3.6.1.4.1.641.2.1.3.1.5
The printer's current paper path status.
OBJECT-TYPE    
  INTEGER notJammed(1), jamed(2), unknown(3)  

prtgenStatusTonerError 1.3.6.1.4.1.641.2.1.3.1.6
The printer's current toner supply status.
OBJECT-TYPE    
  INTEGER noTonerError(1), tonerError(2), unknown(3)  

prtgenStatusSrvcReqd 1.3.6.1.4.1.641.2.1.3.1.7
The printer's current service required status.
OBJECT-TYPE    
  INTEGER noServiceRequired(1), serviceRequired(2), unknown(3)  

prtgenStatusDiskError 1.3.6.1.4.1.641.2.1.3.1.8
The printer's current disk sub-system status.
OBJECT-TYPE    
  INTEGER noDiskError(1), diskError(2), unknown(3)  

prtgenStatusCoverOpen 1.3.6.1.4.1.641.2.1.3.1.9
The printer's current cover status.
OBJECT-TYPE    
  INTEGER noCoverOpen(1), coverOpen(2), unknown(3)  

prtgenStatusPageComplex 1.3.6.1.4.1.641.2.1.3.1.10
The printer's current complex page status.
OBJECT-TYPE    
  INTEGER noComplexPage(1), complexPage(2), unknown(3)  

prtgenStatusLineStatus 1.3.6.1.4.1.641.2.1.3.1.11
The printer's current online/offline status.
OBJECT-TYPE    
  INTEGER online(1), offline(2), unknown(3)  

prtgenStatusBusy 1.3.6.1.4.1.641.2.1.3.1.12
The printer's current bust status.
OBJECT-TYPE    
  INTEGER notBusy(1), busy(2), unknown(3)  

prtgenStatusWaiting 1.3.6.1.4.1.641.2.1.3.1.13
The printer's current waiting status.
OBJECT-TYPE    
  INTEGER notWaiting(1), waiting(2), unknown(3)  

prtgenStatusWarming 1.3.6.1.4.1.641.2.1.3.1.14
The printer's current warming status.
OBJECT-TYPE    
  INTEGER notWarming(1), warming(2), unknown(3)  

prtgenStatusPrinting 1.3.6.1.4.1.641.2.1.3.1.15
The printer's current printing status.
OBJECT-TYPE    
  INTEGER notPrinting(1), printing(2), unknown(3)  

faxNumber 1.3.6.1.4.1.641.3.1.1
The number of fax modems attached to the adapter.
OBJECT-TYPE    
  INTEGER  

faxTable 1.3.6.1.4.1.641.3.1.2
A table of the network adapter's attached fax modems configuration data.
OBJECT-TYPE    
  SEQUENCE OF  
    FaxEntry

faxEntry 1.3.6.1.4.1.641.3.1.2.1
An entry containing attached fax modem configuration data.
OBJECT-TYPE    
  FaxEntry  

faxIndex 1.3.6.1.4.1.641.3.1.2.1.1
A unique value used by the adapter to identify fax ports.
OBJECT-TYPE    
  INTEGER  

faxPort 1.3.6.1.4.1.641.3.1.2.1.2
The network adapter's port to which this modem is attached.
OBJECT-TYPE    
  INTEGER serial1(145), serial2(146), serial3(147), serial4(148), serial5(149)  

faxAdapterCapabilities 1.3.6.1.4.1.641.3.1.2.1.3
A bitmap representing the fax capabilities of the network adapter. Bit Value Capabilities --- ------ -------------------- 0 1 Fine Resolution 1 2 2D Encoding 2 4 T6 Encoding 3 8 ECM 4 16 Binary File Transfer 5 32 300 x 300 6 64 400 x 400 7 128 200 x 400 8 256 Uncompressed Mode 9 512 255mm Width 10 1024 303mm Width 11 2048 Legal Length 12 4096 Unlimited Length 13 8192 V.17 (14400) 14 16384 V.33 (14400) 15 32768 V.29 and V.27 (9600) 16 65536 V.29 (9600) 17 131072 V.27 (4800) 18 262144 V27 (2400)
OBJECT-TYPE    
  INTEGER 0..2147483647  

faxModemCapabilities 1.3.6.1.4.1.641.3.1.2.1.4
A bitmap representing the fax capabilities of the attached modem. Bit Value Capabilities --- ------ -------------------- 0 1 Fine Resolution 1 2 2D Encoding 2 4 T6 Encoding 3 8 ECM 4 16 Binary File Transfer 5 32 300 x 300 6 64 400 x 400 7 128 200 x 400 8 256 Uncompressed Mode 9 512 255mm Width 10 1024 303mm Width 11 2048 Legal Length 12 4096 Unlimited Length 13 8192 V.17 (14400) 14 16384 V.33 (14400) 15 32768 V.29 and V.27 (9600) 16 65536 V.29 (9600) 17 131072 V.27 (4800) 18 262144 V27 (2400)
OBJECT-TYPE    
  INTEGER 0..2147483647  

faxSelectedCapabilities 1.3.6.1.4.1.641.3.1.2.1.5
A bitmap representing the user selected fax capabilities. Bit Value Capabilities --- ------ -------------------- 0 1 Fine Resolution 1 2 2D Encoding 2 4 T6 Encoding 3 8 ECM 4 16 Binary File Transfer 5 32 300 x 300 6 64 400 x 400 7 128 200 x 400 8 256 Uncompressed Mode 9 512 255mm Width 10 1024 303mm Width 11 2048 Legal Length 12 4096 Unlimited Length 13 8192 V.17 (14400) 14 16384 V.33 (14400) 15 32768 V.29 and V.27 (9600) 16 65536 V.29 (9600) 17 131072 V.27 (4800) 18 262144 V27 (2400)
OBJECT-TYPE    
  INTEGER 0..2147483647  

faxActiveCapabilities 1.3.6.1.4.1.641.3.1.2.1.6
A bitmap representing the active fax capabilities. This is the logical and of faxAdapterCapabilities, faxModemCapabilities, and faxSelectedCapabilities. Bit Value Capabilities --- ------ -------------------- 0 1 Fine Resolution 1 2 2D Encoding 2 4 T6 Encoding 3 8 ECM 4 16 Binary File Transfer 5 32 300 x 300 6 64 400 x 400 7 128 200 x 400 8 256 Uncompressed Mode 9 512 255mm Width 10 1024 303mm Width 11 2048 Legal Length 12 4096 Unlimited Length 13 8192 V.17 (14400) 14 16384 V.33 (14400) 15 32768 V.29 and V.27 (9600) 16 65536 V.29 (9600) 17 131072 V.27 (4800) 18 262144 V27 (2400)
OBJECT-TYPE    
  INTEGER 0..2147483647  

faxIDString 1.3.6.1.4.1.641.3.1.2.1.7
The textual identification that is used to identify this fax device. This text is sent to a connected fax device at the start of a call.
OBJECT-TYPE    
  DisplayString Size(0..20)  

faxInitString 1.3.6.1.4.1.641.3.1.2.1.8
The commands used be the network adapter to initialize an attached modem.
OBJECT-TYPE    
  DisplayString Size(0..128)  

faxNumberRings 1.3.6.1.4.1.641.3.1.2.1.9
The number of rings that the network adapter should wait before answering.
OBJECT-TYPE    
  INTEGER 1..255  

faxScaling 1.3.6.1.4.1.641.3.1.2.1.10
The mechanism used to resolve size descrepancies between the received fax the printer's available forms.
OBJECT-TYPE    
  INTEGER scaleToFit(1), cropToFit(2)  

faxBinaryEncoding 1.3.6.1.4.1.641.3.1.2.1.11
The encoding used when sending fax data to the attached printer.
OBJECT-TYPE    
  INTEGER taggedBinary(1), ascii85(2)  

faxPrinterPort 1.3.6.1.4.1.641.3.1.2.1.13
The port (printer) to which received faxes should be printed.
OBJECT-TYPE    
  INTEGER parallel1(129), parallel2(130), firstAvail(255)  

faxInputTray 1.3.6.1.4.1.641.3.1.2.1.14
The input tray from which received faxes should be printed. The value 255 indicates printer default.
OBJECT-TYPE    
  INTEGER  

faxOutputBin 1.3.6.1.4.1.641.3.1.2.1.15
The output bin to which received faxes should be printed. The value 255 indicates printer default.
OBJECT-TYPE    
  INTEGER