LEFTHAND-NETWORKS-NSM-NOTIFICATION-MIB

File: LEFTHAND-NETWORKS-NSM-NOTIFICATION-MIB.mib (50839 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
LEFTHAND-NETWORKS-GLOBAL-REG-MIB LEFTHAND-NETWORKS-NSM-MIB

Imported symbols

MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE
NOTIFICATION-TYPE Integer32 Unsigned32
Gauge32 OBJECT-GROUP NOTIFICATION-GROUP
MODULE-COMPLIANCE TEXTUAL-CONVENTION DisplayString
DateAndTime TruthValue lhnModules
lhnNsm lhnNsmNotification lhnNsmEvents
lhnNsmOldNotification lhnNsmOldEvents

Defined Types

NotificationMessageEntry  
SEQUENCE    
  notificationMessageIndex Unsigned32
  message DisplayString
  messageTime DateAndTime
  eventID DisplayString
  severity INTEGER
  hostname DisplayString
  primaryIP DisplayString
  mac DisplayString
  serialNumber DisplayString
  modelName DisplayString
  productName DisplayString
  productID DisplayString
  hpim TruthValue
  softwareVersion DisplayString
  managementGroupVersion DisplayString
  managementGroupSerialNumber DisplayString
  managementGroup DisplayString
  cluster DisplayString
  site DisplayString
  componentName DisplayString
  systemName DisplayString
  logicalName DisplayString
  componentState DisplayString
  componentModel DisplayString
  componentSerialNumber DisplayString
  componentFirmwareVersion DisplayString
  componentHardwareVersion DisplayString
  driverVersion DisplayString
  biosVersion DisplayString
  raidConfiguration DisplayString
  diskInterface DisplayString
  diskCapacity Integer32
  raidState DisplayString
  parityInitStatus DisplayString
  healthState DisplayString
  bbuState DisplayString
  cacheState DisplayString
  linkState DisplayString
  vipState DisplayString
  maintenanceMode DisplayString
  minFanSpeed Integer32
  fanSpeed Gauge32
  highTemperatureLimit Integer32
  temperatureState DisplayString
  temperature Gauge32
  highVoltageLimit Integer32
  lowVoltageLimit Integer32
  voltage Gauge32
  utilization Gauge32
  latency Gauge32
  memoryUtilization Gauge32
  memoryConfig Integer32
  cpuUtilization Gauge32
  cpuConfig Integer32
  diskSpeed DisplayString
  licenseState DisplayString
  utilizationState DisplayString
  latencyState DisplayString
  serverVIPAddress DisplayString
  serverVIPState DisplayString
  replicationState DisplayString
  snapshotState DisplayString
  snapshotSchedState DisplayString

NotificationOldMessageEntry  
SEQUENCE    
  notificationIndex Unsigned32
  notificationMessage DisplayString
  notificationTime DateAndTime

Defined Values

lhnNsmNotificationModule 1.3.6.1.4.1.9804.2.1.15
HP StorageWorks P4000 Notifications: Traps(v1) and Informs(v2c)
MODULE-IDENTITY    

lhnNsmDevices 1.3.6.1.4.1.9804.3.1.1
sub-tree for NSM devices
Status: current Access: read-only
OBJECT-IDENTITY    

lhnNsmEvents 1.3.6.1.4.1.9804.3.1.1.0
sub-tree for NSM events
Status: current Access: read-only
OBJECT-IDENTITY    

lhnNsmNotificationModuleConformance 1.3.6.1.4.1.9804.2.1.15.1
OBJECT IDENTIFIER    

lhnNsmNotificationModuleCompliances 1.3.6.1.4.1.9804.2.1.15.1.1
OBJECT IDENTIFIER    

lhnNsmNotificationModuleGroups 1.3.6.1.4.1.9804.2.1.15.1.2
OBJECT IDENTIFIER    

lefthandNetworksNsmNotificationMibCompliance 1.3.6.1.4.1.9804.2.1.15.1.1.1
The compliance statement.
Status: current Access: read-only
MODULE-COMPLIANCE    

lefthandNetworksNsmNotificationGroup 1.3.6.1.4.1.9804.2.1.15.1.2.1
The default group for all NSM Notification objects.
Status: current Access: read-only
OBJECT-GROUP    

lefthandNetworksNsmNotificationMibAllNotifications 1.3.6.1.4.1.9804.2.1.15.1.2.2
The default group for all NSM Notification objects.
Status: current Access: read-only
NOTIFICATION-GROUP    

notificationMessageCount 1.3.6.1.4.1.9804.3.1.1.2.15.1
The number of notification messages available in the history.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

notificationMessageTable 1.3.6.1.4.1.9804.3.1.1.2.15.2
A table of the last 100 notifications for the NSM. The number of entries is given by messageNotificationCount.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NotificationMessageEntry

notificationMessageEntry 1.3.6.1.4.1.9804.3.1.1.2.15.2.1
A row of notification message information. The information contained in each row is dependant on the trap type and the event that caused the trap. Not all NotificationMessageEntry objects will have values.
Status: current Access: not-accessible
OBJECT-TYPE    
  NotificationMessageEntry  

notificationMessageIndex 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.1
The index for the notificationMessageTable table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

message 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.2
The notification message.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

messageTime 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.3
The time the notification was sent.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

eventID 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.4
The event ID in symbolic format.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

severity 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.5
The event severity.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER critical(0), warning(1), info(2)  

hostname 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.6
The NSM hostname.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

primaryIP 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.7
The primary IP address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mac 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.8
The MAC address of the primary IP address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

serialNumber 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.9
The chassis serial number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

modelName 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.10
The system model name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

productName 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.11
The OEM product name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

productID 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.12
The OEM product ID.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hpim 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.13
HP Insight Manager SNMP agent installed on NSM
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

softwareVersion 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.14
The SAN/iQ software version
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

managementGroupVersion 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.15
The management group version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

managementGroupSerialNumber 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.16
The management group serial number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

managementGroup 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.17
The management group name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cluster 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.18
The cluster name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

site 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.19
The site the cluster is in.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

componentName 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.20
The component name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

systemName 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.21
The system hostname.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

logicalName 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.22
The logical name for the component.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

componentState 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.23
The component state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

componentModel 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.24
The component model.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

componentSerialNumber 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.25
The component serial number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

componentFirmwareVersion 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.26
The component firmware version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

componentHardwareVersion 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.27
The component hardware version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

driverVersion 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.28
The driver version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

biosVersion 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.29
The BIOS version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

raidConfiguration 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.30
The RAID configuration.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

diskInterface 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.31
The disk interface type.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

diskCapacity 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.32
The disk capacity.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

raidState 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.33
The RAID state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

parityInitStatus 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.34
The RAID Parity Initialization status.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

healthState 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.35
The disk health state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bbuState 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.36
The BBU state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cacheState 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.37
The cache state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

linkState 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.38
The link state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

vipState 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.39
The cluster VIP state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

maintenanceMode 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.40
The management group maintenance mode.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

minFanSpeed 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.41
The minimal fan speed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fanSpeed 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.42
The fan speed.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

highTemperatureLimit 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.43
The high temperature limit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

temperatureState 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.44
The component temperature state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

temperature 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.45
The component temperature.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

highVoltageLimit 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.46
The high voltage limit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lowVoltageLimit 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.47
The low voltage limit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

voltage 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.48
The voltage.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

utilization 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.49
The rescource utilization.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

latency 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.50
The storage server latency.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

memoryUtilization 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.51
The memory utilization.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

memoryConfig 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.52
The system memory configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuUtilization 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.53
The CPU utilization.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cpuConfig 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.54
The number of CPU cores.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

diskSpeed 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.55
The disk interface speed.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

licenseState 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.56
The feature license state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

utilizationState 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.57
The utilization state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

latencyState 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.58
The storage server latency state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

serverVIPAddress 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.59
The VIP address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

serverVIPState 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.60
The VIP state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

replicationState 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.61
The volume/snapshot replication state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

snapshotState 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.62
The snapshot state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

snapshotSchedState 1.3.6.1.4.1.9804.3.1.1.2.15.2.1.63
The snapshot schedule state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

lhnNsmNotificationGeneric 1.3.6.1.4.1.9804.3.1.1.0.1
A generic system event was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationBackplane 1.3.6.1.4.1.9804.3.1.1.0.2
An event for the system backplane was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationController 1.3.6.1.4.1.9804.3.1.1.0.3
An event for the RAID controller was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationRAID 1.3.6.1.4.1.9804.3.1.1.0.4
An event for the system RAID was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationDisk 1.3.6.1.4.1.9804.3.1.1.0.5
An event for a disk was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationBootDevice 1.3.6.1.4.1.9804.3.1.1.0.6
An event for a boot device was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationFan 1.3.6.1.4.1.9804.3.1.1.0.7
An event for a fan was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationTemperature 1.3.6.1.4.1.9804.3.1.1.0.8
An event for a temperature sensor was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationPowerSupply 1.3.6.1.4.1.9804.3.1.1.0.9
An event for a power supply was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationVoltage 1.3.6.1.4.1.9804.3.1.1.0.10
An event for a voltage sensor was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationNetwork 1.3.6.1.4.1.9804.3.1.1.0.11
An event for the network was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationMemory 1.3.6.1.4.1.9804.3.1.1.0.12
An event for the system memory was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationCPU 1.3.6.1.4.1.9804.3.1.1.0.13
An event for the CPU was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationLogging 1.3.6.1.4.1.9804.3.1.1.0.14
An event for the log partition was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationManagementGroup 1.3.6.1.4.1.9804.3.1.1.0.15
An event for the management group was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationRemoteManagementGroup 1.3.6.1.4.1.9804.3.1.1.0.16
An event for a remote management group was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationCluster 1.3.6.1.4.1.9804.3.1.1.0.17
An event for the cluster was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationStorageServer 1.3.6.1.4.1.9804.3.1.1.0.18
An event for the storage server was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationRemoteCopy 1.3.6.1.4.1.9804.3.1.1.0.19
An event for a remote copy operation was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationVolume 1.3.6.1.4.1.9804.3.1.1.0.20
An event for a volume was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

lhnNsmNotificationSnapshot 1.3.6.1.4.1.9804.3.1.1.0.21
An event for a snapshot was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Added in SAN/iQ 8.5
Status: current Access: read-only
NOTIFICATION-TYPE    

notificationOldMessageCount 1.3.6.1.4.1.9804.3.1.1.2.13.1
number of notification messages Used by SAN/iQ 8.1 and earlier. Obsolete in SAN/iQ 8.5. Marked as current to increase compatability with some SNMP clients.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

notificationOldMessageTable 1.3.6.1.4.1.9804.3.1.1.2.13.2
A table of notification messages for the NSM. The number of entries is given by notificationMessageCount. Used by SAN/iQ 8.1 and earlier. Obsolete in SAN/iQ 8.5. Marked as current to increase compatability with some SNMP clients.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NotificationOldMessageEntry

notificationOldMessageEntry 1.3.6.1.4.1.9804.3.1.1.2.13.2.1
row of notification message parameters Used by SAN/iQ 8.1 and earlier. Obsolete in SAN/iQ 8.5. Marked as current to increase compatability with some SNMP clients.
Status: current Access: not-accessible
OBJECT-TYPE    
  NotificationOldMessageEntry  

notificationIndex 1.3.6.1.4.1.9804.3.1.1.2.13.2.1.1
notification message index Used by SAN/iQ 8.1 and earlier. Obsolete in SAN/iQ 8.5. Marked as current to increase compatability with some SNMP clients.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

notificationMessage 1.3.6.1.4.1.9804.3.1.1.2.13.2.1.2
notification message contents Used by SAN/iQ 8.1 and earlier. Obsolete in SAN/iQ 8.5. Marked as current to increase compatability with some SNMP clients.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

notificationTime 1.3.6.1.4.1.9804.3.1.1.2.13.2.1.3
time notification occurred Used by SAN/iQ 8.1 and earlier. Obsolete in SAN/iQ 8.5. Marked as current to increase compatability with some SNMP clients.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

userNotification 1.3.6.1.4.1.9804.3.1.1.3.1
A system event was generated. The user chose to be notified of this condition via SNMP. A table of messages exists which stores all the notifications issued. This trap will contain the OID referring to the corresponding message stored in this table. Used by SAN/iQ 8.1 and earlier. Obsolete in SAN/iQ 8.5. Marked as current to increase compatability with some SNMP clients.
Status: current Access: read-only
NOTIFICATION-TYPE