LBHUB-MSH4PTBRDG-MIB

File: LBHUB-MSH4PTBRDG-MIB.mib (117117 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

Counter Gauge TimeTicks
enterprises internet IpAddress
mgmt NetworkAddress experimental
OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

PhysAddress  
OCTET STRING    

Timeout  
INTEGER    

CIpNetToMediaEntry  
SEQUENCE    
  cIpNetToMediaIfIndex INTEGER
  cIpNetToMediaNetAddress IpAddress
  cIpNetToMediaRefTime TimeTicks
  cIpNetToMediaProxyRespond INTEGER
  cIpNetToMediaComplete INTEGER
  cIpNetToMediaUseTrailers INTEGER

IfExtnsEntry  
SEQUENCE    
  ifExtnsIfIndex INTEGER
  ifExtnsChipSet OBJECT IDENTIFIER
  ifExtnsRevWare DisplayString
  ifExtnsMulticastsTransmittedOks Counter
  ifExtnsBroadcastsTransmittedOks Counter
  ifExtnsMulticastsReceivedOks Counter
  ifExtnsBroadcastsReceivedOks Counter
  ifExtnsPromiscuous INTEGER

IfExtnsRcvAddrEntry  
SEQUENCE    
  ifExtnsRcvAddrIfIndex INTEGER
  ifExtnsRcvAddress PhysAddress
  ifExtnsRcvAddrStatus INTEGER

Dot3Entry  
SEQUENCE    
  dot3Index INTEGER
  dot3InitializeMac INTEGER
  dot3MacSubLayerStatus INTEGER
  dot3MulticastReceiveStatus INTEGER
  dot3TxEnabled INTEGER
  dot3TestTdrValue Gauge

Dot3StatsEntry  
SEQUENCE    
  dot3StatsIndex INTEGER
  dot3StatsAlignmentErrors Counter
  dot3StatsFCSErrors Counter
  dot3StatsSingleCollisionFrames Counter
  dot3StatsMultipleCollisionFrames Counter
  dot3StatsSQETestErrors Counter
  dot3StatsDeferredTransmissions Counter
  dot3StatsLateCollisions Counter
  dot3StatsExcessiveCollisions Counter
  dot3StatsInternalMacTransmitErrors Counter
  dot3StatsCarrierSenseErrors Counter
  dot3StatsExcessiveDeferrals Counter
  dot3StatsFrameTooLongs Counter
  dot3StatsInRangeLengthErrors Counter
  dot3StatsOutOfRangeLengthFields Counter
  dot3StatsInternalMacReceiveErrors Counter

CDot3Entry  
SEQUENCE    
  cDot3Index INTEGER
  cDot3Disables Counter
  cDot3MauDisconnect Counter
  cDot3Babbles Counter
  cDot3MerrDisconnect Counter
  cDot3TxonDisconnect Counter
  cDot3RxonDisconnect Counter
  cDot3XmitFailure Counter
  cDot3XmitBuffErr Counter
  cDot3XmitUflo Counter
  cDot3RcvBuffErr Counter
  cDot3RcvOflo Counter
  cDot3Startless Counter
  cDot3Endless Counter

OperAcctEntry  
SEQUENCE    
  cOperIndex INTEGER
  cOperID OCTET STRING
  cOperPriv INTEGER
  cOperPasswd OCTET STRING
  cOperStatus INTEGER

SnmpCommunityEntry  
SEQUENCE    
  cSnmpCommunityIndex INTEGER
  cSnmpCommunity OCTET STRING Size(1..32)
  cSnmpCommunityIf INTEGER
  cSnmpCommunityAccess INTEGER
  cSnmpCommunityTrapAddress IpAddress
  cSnmpCommunityTrapPort INTEGER
  cSnmpCommunityTrapEnabled INTEGER

EtherSWQEntry  
SEQUENCE    
  cEtherSWQIndex INTEGER 1..16
  cEtherSWQMaxSize INTEGER 0..512
  cEtherSWQMaxTtl INTEGER 5..500

LoginEntry  
SEQUENCE    
  cLoginIndex INTEGER
  cLoginUser OCTET STRING Size(1..8)
  cLoginLocal INTEGER
  cLoginRemote IpAddress

NodeByAddressEntry  
SEQUENCE    
  cNodeByAddressAddr OCTET STRING Size(6)
  cNodeByAddressBridge INTEGER
  cNodeByAddressPort INTEGER
  cNodeByAddressStatus INTEGER

NodeByHashEntry  
SEQUENCE    
  cNodeByHashIndex INTEGER
  cNodeByHashBucket INTEGER 0..511
  cNodeByHashBridge INTEGER
  cNodeByHashAddress OCTET STRING Size(6)
  cNodeByHashPort INTEGER
  cNodeByHashStatus INTEGER

HardwareStatusEntry  
SEQUENCE    
  cHardwareStatusIndex INTEGER 1..31
  cHardwareStatusSlot INTEGER 1..11
  cHardwareStatusContents DisplayString
  cHardwareStatusMacAddr OCTET STRING Size(6)
  cHardwareStatusSerialNo OCTET STRING
  cHardwareStatusRevision OCTET STRING
  cHardwareStatusStatus DisplayString

ErrorLogEntry  
SEQUENCE    
  cErrorLogIndex INTEGER
  cErrorLogMessage OCTET STRING Size(1..80)

Defined Values

private 1.3.6.1.4
OBJECT IDENTIFIER    

enterprises 1.3.6.1.4.1
OBJECT IDENTIFIER    

mib-2 1.3.6.1.2.1
OBJECT IDENTIFIER    

system 1.3.6.1.2.1.1
OBJECT IDENTIFIER    

interfaces 1.3.6.1.2.1.2
OBJECT IDENTIFIER    

ip 1.3.6.1.2.1.4
OBJECT IDENTIFIER    

icmp 1.3.6.1.2.1.5
OBJECT IDENTIFIER    

tcp 1.3.6.1.2.1.6
OBJECT IDENTIFIER    

udp 1.3.6.1.2.1.7
OBJECT IDENTIFIER    

egp 1.3.6.1.2.1.8
OBJECT IDENTIFIER    

transmission 1.3.6.1.2.1.10
OBJECT IDENTIFIER    

dot3 1.3.6.1.2.1.10.7
OBJECT IDENTIFIER    

snmp 1.3.6.1.2.1.11
OBJECT IDENTIFIER    

ifExtensions 1.3.6.1.2.1.12
OBJECT IDENTIFIER    

dot1dBridge 1.3.6.1.2.1.17
OBJECT IDENTIFIER    

constellation 1.3.6.1.4.1.187
OBJECT IDENTIFIER    

cExper 1.3.6.1.4.1.187.1
OBJECT IDENTIFIER    

cProducts 1.3.6.1.4.1.187.2
OBJECT IDENTIFIER    

cLittleDipper 1.3.6.1.4.1.187.2.1
OBJECT IDENTIFIER    

cAuriga 1.3.6.1.4.1.187.2.3
OBJECT IDENTIFIER    

cCarina 1.3.6.1.4.1.187.2.4
OBJECT IDENTIFIER    

cCarinaAui 1.3.6.1.4.1.187.2.4.1
OBJECT IDENTIFIER    

cCarinaBnc 1.3.6.1.4.1.187.2.4.2
OBJECT IDENTIFIER    

cDuPont 1.3.6.1.4.1.187.2.5
OBJECT IDENTIFIER    

cDuPontAui 1.3.6.1.4.1.187.2.5.1
OBJECT IDENTIFIER    

cDatabil 1.3.6.1.4.1.187.2.6
OBJECT IDENTIFIER    

cDatability 1.3.6.1.4.1.187.2.6.1
OBJECT IDENTIFIER    

cPenr 1.3.6.1.4.1.187.2.7
OBJECT IDENTIFIER    

cPenril 1.3.6.1.4.1.187.2.7.1
OBJECT IDENTIFIER    

cThreeCom 1.3.6.1.4.1.187.2.8
OBJECT IDENTIFIER    

cThreeComMSH 1.3.6.1.4.1.187.2.8.1
OBJECT IDENTIFIER    

cStdExtensions 1.3.6.1.4.1.187.3
OBJECT IDENTIFIER    

cSystem 1.3.6.1.4.1.187.3.1
OBJECT IDENTIFIER    

cInterfaces 1.3.6.1.4.1.187.3.2
OBJECT IDENTIFIER    

cIp 1.3.6.1.4.1.187.3.4
OBJECT IDENTIFIER    

cIcmp 1.3.6.1.4.1.187.3.5
OBJECT IDENTIFIER    

cTcp 1.3.6.1.4.1.187.3.6
OBJECT IDENTIFIER    

cUdp 1.3.6.1.4.1.187.3.7
OBJECT IDENTIFIER    

cTransmission 1.3.6.1.4.1.187.3.10
OBJECT IDENTIFIER    

cDot3 1.3.6.1.4.1.187.3.10.7
OBJECT IDENTIFIER    

cSnmp 1.3.6.1.4.1.187.3.11
OBJECT IDENTIFIER    

cConstellation 1.3.6.1.4.1.187.4
OBJECT IDENTIFIER    

cProxys 1.3.6.1.4.1.187.5
OBJECT IDENTIFIER    

cProxyLb 1.3.6.1.4.1.187.5.1
OBJECT IDENTIFIER    

cProxyLb0 1.3.6.1.4.1.187.5.1.1
OBJECT IDENTIFIER    

cProxyLb1 1.3.6.1.4.1.187.5.1.2
OBJECT IDENTIFIER    

cProxyLb2 1.3.6.1.4.1.187.5.1.3
OBJECT IDENTIFIER    

cProxyLb3 1.3.6.1.4.1.187.5.1.4
OBJECT IDENTIFIER    

cProxyLr 1.3.6.1.4.1.187.5.2
OBJECT IDENTIFIER    

cProxyLr0 1.3.6.1.4.1.187.5.2.1
OBJECT IDENTIFIER    

cIpInLenErrors 1.3.6.1.4.1.187.3.4.1
Number of packets received with an inconsistant Header/Packet length
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpInVersionErrors 1.3.6.1.4.1.187.3.4.2
Number of packets received with an incorrect IP version number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpInCSErrors 1.3.6.1.4.1.187.3.4.3
Number of packets received with an incorrect IP checksum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpTTLZero 1.3.6.1.4.1.187.3.4.4
Number of packets that would have been forwarded but their TTL went to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpReasmTimeOuts 1.3.6.1.4.1.187.3.4.5
Number of reassmebly timeouts. This is included inthe ipReasmFails object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMedia 1.3.6.1.4.1.187.3.4.7
OBJECT IDENTIFIER    

cIpNetToMediaTableSize 1.3.6.1.4.1.187.3.4.7.1
The maximum number of entries that can be in the cIpNetToMediaTable/ipNetToMediaTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cIpNetToMediaCompleteTimeOut 1.3.6.1.4.1.187.3.4.7.2
The maximum age, in minutes, that a completed entry may remain in the table before it is timed out and discarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cIpNetToMediaInCompleteTimeOut 1.3.6.1.4.1.187.3.4.7.3
The maximum age, in minutes, that an incomplete entry may remain in the table before it is timed out and discarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cIpNetToMediaIns 1.3.6.1.4.1.187.3.4.7.4
Total number of arp packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaInLenErrs 1.3.6.1.4.1.187.3.4.7.5
Total number of arp packets received which had inconsistant or incorrect lengths. These packets are ignored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaInNotEther 1.3.6.1.4.1.187.3.4.7.6
Total number of arp packets received which specified a hardware type other than Ethernet. These packets are ignored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaInNoArpOnIf 1.3.6.1.4.1.187.3.4.7.7
Number of ARP packets received in an interface for which ARP is disabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaInIp 1.3.6.1.4.1.187.3.4.7.8
Number of ARP packets received specifying IP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaInIpTrailers 1.3.6.1.4.1.187.3.4.7.9
Number of ARP packets received specifying IP Trailers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaInUnkProtos 1.3.6.1.4.1.187.3.4.7.10
Number of ARP packets received specifying an unknown protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaInSourceBcast 1.3.6.1.4.1.187.3.4.7.11
Number of ARP packets received with a broadcast or multicast source hardware address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaInDups 1.3.6.1.4.1.187.3.4.7.12
Number of ARP packets received that originated from another node but had the IP address of this node in the packet's source protocol address field.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaInRequests 1.3.6.1.4.1.187.3.4.7.13
Number of ARP Requests received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaInResponses 1.3.6.1.4.1.187.3.4.7.14
Number of ARP Responses received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaInProxyOks 1.3.6.1.4.1.187.3.4.7.15
Number of proxy ARP requests that we received and have answered.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaOutReplys 1.3.6.1.4.1.187.3.4.7.16
Number of ARP replys sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaOutRequests 1.3.6.1.4.1.187.3.4.7.17
Number of ARP requests sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaReqBadAddrs 1.3.6.1.4.1.187.3.4.7.18
Number of times that a request was for an incorrect IP address (such as the broadcast).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaNoResponses 1.3.6.1.4.1.187.3.4.7.19
Number of times that a request timed out.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaAgeOuts 1.3.6.1.4.1.187.3.4.7.20
Number of times that an entry was aged out of the arp cache because it had not been referenced recently.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIpNetToMediaTable 1.3.6.1.4.1.187.3.4.7.21
Table containing Constellation extensions to the IP Address Translation (IpNetToMedia) table defined above.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CIpNetToMediaEntry

cIpNetToMediaEntry 1.3.6.1.4.1.187.3.4.7.21.1
Each entry contains Constellation extensions for one IpAddress to `physical' address equivalence.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CIpNetToMediaEntry  

cIpNetToMediaIfIndex 1.3.6.1.4.1.187.3.4.7.21.1.1
The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cIpNetToMediaNetAddress 1.3.6.1.4.1.187.3.4.7.21.1.2
The IpAddress corresponding to the media- dependent `physical' address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

cIpNetToMediaRefTime 1.3.6.1.4.1.187.3.4.7.21.1.3
The value of sysUpTime when this entry was last referenced.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

cIpNetToMediaProxyRespond 1.3.6.1.4.1.187.3.4.7.21.1.4
Is true(1) if this node willrespond to this IP Address following the rules of proxy arp. Otherwise this object is false(2). Setting this object to false(2) will have the effect of preventing this node from responding to this address. Setting this object to true(1) will cause this node to begin responding to this address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

cIpNetToMediaComplete 1.3.6.1.4.1.187.3.4.7.21.1.5
Is true(1) if the table entry is complete -- that is to say, the ipNetToMediaPhysAddress contains a valid value. If this object is false then the physical address may not be correct. Typically, a 0 length octet string is returned if the entry is not complete.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

cIpNetToMediaUseTrailers 1.3.6.1.4.1.187.3.4.7.21.1.6
Is true(1) if this entry will use ARP trailers. Otherwise this object is false(2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

cIcmpInRedirectNet 1.3.6.1.4.1.187.3.5.1
Number of ICMP Destination Unreachable, Network Unreachable messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInRedirectHost 1.3.6.1.4.1.187.3.5.2
Number of ICMP Destination Unreachable, Host Unreachable messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInRedirectNetTos 1.3.6.1.4.1.187.3.5.3
Number of ICMP Destination Unreachable, Network/TOS Unreachable messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInRedirectHostTos 1.3.6.1.4.1.187.3.5.4
Number of ICMP Destination Unreachable, Host/TOS Unreachable messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInTimeExcTTL 1.3.6.1.4.1.187.3.5.5
Number of ICMP Time Exceeded, TTL Exceeded in Transit messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInTimeExcReAsm 1.3.6.1.4.1.187.3.5.6
Number of ICMP Time Exceeded, Reassembly Time Exceeded messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInDestUnNet 1.3.6.1.4.1.187.3.5.7
Number of ICMP Network Destination Unreachable messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInDestUnHost 1.3.6.1.4.1.187.3.5.8
Number of ICMP Host Destination Unreachable messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInDestUnProtocol 1.3.6.1.4.1.187.3.5.9
Number of ICMP Protocol Destination Unreachable messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInDestUnPort 1.3.6.1.4.1.187.3.5.10
Number of ICMP Port Destination Unreachable messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInDestUnFragNeeded 1.3.6.1.4.1.187.3.5.11
Number of ICMP Fragmentation Needed and DF Set Destination Unreachable messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInDestUnSourceRoute 1.3.6.1.4.1.187.3.5.12
Number of ICMP Source Route Failed Destination Unreachable messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutRedirectNet 1.3.6.1.4.1.187.3.5.13
Number of ICMP Destination Unreachable, Network Unreachable messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutRedirectHost 1.3.6.1.4.1.187.3.5.14
Number of ICMP Destination Unreachable, Host Unreachable messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutRedirectNetTos 1.3.6.1.4.1.187.3.5.15
Number of ICMP Destination Unreachable, Network/TOS Unreachable messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutRedirectHostTos 1.3.6.1.4.1.187.3.5.16
Number of ICMP Destination Unreachable, Host/TOS Unreachable messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutTimeExcTTL 1.3.6.1.4.1.187.3.5.17
Number of ICMP Time Exceeded, TTL Exceeded in Transit messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutTimeExcReAsm 1.3.6.1.4.1.187.3.5.18
Number of ICMP Time Exceeded, Reassembly Time Exceeded messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutDestUnNet 1.3.6.1.4.1.187.3.5.19
Number of ICMP Network Destination Unreachable messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutDestUnHost 1.3.6.1.4.1.187.3.5.20
Number of ICMP Host Destination Unreachable messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutDestUnProtocol 1.3.6.1.4.1.187.3.5.21
Number of ICMP Protocol Destination Unreachable messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutDestUnPort 1.3.6.1.4.1.187.3.5.22
Number of ICMP Port Destination Unreachable messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutDestUnFragNeeded 1.3.6.1.4.1.187.3.5.23
Number of ICMP Fragmentation Needed and DF Set Destination Unreachable messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutDestUnSourceRoute 1.3.6.1.4.1.187.3.5.24
Number of ICMP Source Route Failed Destination Unreachable messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInLengthErrors 1.3.6.1.4.1.187.3.5.25
Number of alleged ICMP packets that were not long enough.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInChecksumErrors 1.3.6.1.4.1.187.3.5.26
Number of alleged ICMP packets that had a bad checksum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInUnkTypes 1.3.6.1.4.1.187.3.5.27
Number of Received ICMP packets with an unknown type field value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInDestUnNetUnknown 1.3.6.1.4.1.187.3.5.28
Number of ICMP Destination Network Unknown Destination Unreachable messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInDestUnHostUnknown 1.3.6.1.4.1.187.3.5.29
Number of ICMP Destination Host Unknown Destination Unreachable messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInDestUnSrcIsolated 1.3.6.1.4.1.187.3.5.30
Number of ICMP Source Isolated Destination Unreachable messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInDestUnHostProhib 1.3.6.1.4.1.187.3.5.31
Number of ICMP Communication with Host Administratively Prohibited Destination Unreachable messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInDestUnNetProhib 1.3.6.1.4.1.187.3.5.32
Number of ICMP Communication with Net Administratively Prohibited Destination Unreachable messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInDestUnNetTos 1.3.6.1.4.1.187.3.5.33
Number of ICMP Network Unreachable with TOS messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInDestUnHostTos 1.3.6.1.4.1.187.3.5.34
Number of ICMP Host Unreachable with TOS messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutDestUnNetUnknown 1.3.6.1.4.1.187.3.5.35
Number of ICMP Destination Network Unknown Destination Unreachable messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutDestUnHostUnknown 1.3.6.1.4.1.187.3.5.36
Number of ICMP Destination Host Unknown Destination Unreachable messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutDestUnSrcIsolated 1.3.6.1.4.1.187.3.5.37
Number of ICMP Source Isolated Destination Unreachable messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutDestUnHostProhib 1.3.6.1.4.1.187.3.5.38
Number of ICMP Communication with Host Administratively Prohibited Destination Unreachable messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutDestUnNetProhib 1.3.6.1.4.1.187.3.5.39
Number of ICMP Communication with Net Administratively Prohibited Destination Unreachable messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutDestUnNetTos 1.3.6.1.4.1.187.3.5.40
Number of ICMP Network Unreachable with TOS messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutDestUnHostTos 1.3.6.1.4.1.187.3.5.41
Number of ICMP Host Unreachable with TOS messages sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpInParmProbMissingOpt 1.3.6.1.4.1.187.3.5.42
Number of received Parameter Problem messages with the Missing Option code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cIcmpOutParmProbMissingOpt 1.3.6.1.4.1.187.3.5.43
Number of sent Parameter Problem messages with the Missing Option code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cUdpHdrDrops 1.3.6.1.4.1.187.3.7.1
Nr of packets dropped because of internal consistancy problems. This counter is a component of the udpInErrors Count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cUdpBadCheckSum 1.3.6.1.4.1.187.3.7.2
Nr of packets dropped because of an incorrect checksum. This counter is a component of the udpInErrors Count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cUdpBadLength 1.3.6.1.4.1.187.3.7.3
Nr of packets dropped because of an incorrect length. This counter is a component of the udpInErrors Count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cUdpOtherErrors 1.3.6.1.4.1.187.3.7.4
Nr of packets dropped because of some error other than one of the above. This counter is a component of the udpInErrors Count. The most likely cause of these errors is a problem in the internal IPC mechanism. Probably because some process that was supposed to be receiving packets is not.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cUdpNoChecksum 1.3.6.1.4.1.187.3.7.5
Nr of packets received with a checksum of 0. This is not an error condition but indicates that there are mentally retarded hosts on the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cSnmpCommunities 1.3.6.1.4.1.187.3.11.1
OBJECT IDENTIFIER    

cSnmpInCommunityMessages 1.3.6.1.4.1.187.3.11.1.1
Number of messages received that use the community- based authentication scheme.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ifExtnsTable 1.3.6.1.2.1.12.1
A list of interfaces extension entries. The number of entries is given by the value of ifNumber, defined in [4,6].
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IfExtnsEntry

ifExtnsEntry 1.3.6.1.2.1.12.1.1
An extension to the interfaces entry, defined in [4,6], containing additional objects at the subnetwork layer and below for a particular interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IfExtnsEntry  

ifExtnsIfIndex 1.3.6.1.2.1.12.1.1.1
The value of this object identifies the interface for which this entry contains extended management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in [4,6], for the same interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ifExtnsChipSet 1.3.6.1.2.1.12.1.1.2
This object identifies the hardware chip set being used in the interface. The assignment of OBJECT IDENTIFIERs to various types of hardware chip sets is defined elsewhere. This document assigns only the value: unknownChipSet for use if the chip set in use is unknown. Note that unknownChipSet is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

ifExtnsRevWare 1.3.6.1.2.1.12.1.1.3
An arbitrary octet string that describes the firmware version of this interface. It is intended that this should be human readable. It must only contain ASCII printable characters. Typically this will be the firmware version of the main interface software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

ifExtnsMulticastsTransmittedOks 1.3.6.1.2.1.12.1.1.4
The count of frames successfully transmitted to a subnetwork or link-layer multicast destination address other than a broadcast address. For a MAC layer protocol, this includes both Group and Functional addresses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ifExtnsBroadcastsTransmittedOks 1.3.6.1.2.1.12.1.1.5
The count of frames successfully transmitted to a subnetwork or link-layer broadcast addresses. It does not include frames sent to a multicast address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ifExtnsMulticastsReceivedOks 1.3.6.1.2.1.12.1.1.6
The count of frames successfully received that are directed to an active subnetwork or link-layer multicast address (for a MAC layer protocol, this includes both Group and Functional addresses). This does not include frames directed to a broadcast address, nor frames received with errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ifExtnsBroadcastsReceivedOks 1.3.6.1.2.1.12.1.1.7
The count of frames successfully received that are directed to a subnetwork or link-layer broadcast address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ifExtnsPromiscuous 1.3.6.1.2.1.12.1.1.8
This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the media. The value true(1) is only legal on certain types of media. If legal, setting this object to a value of true(1) may require the interface to be reset before becoming effective.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

ifExtnsRcvAddrTable 1.3.6.1.2.1.12.3
This table contains an entry for each address (broadcast, multicast, or uni-cast) for which the system will receive packets/ frames on a particular interface. When an interface is operating in promiscuous mode, entries are only required for those addresses for which the system would receive frames were it not operating in promiscuous mode.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IfExtnsRcvAddrEntry

ifExtnsRcvAddrEntry 1.3.6.1.2.1.12.3.1
A list of objects identifying an address for which the system will accept packets/ frames on a particular interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IfExtnsRcvAddrEntry  

ifExtnsRcvAddrIfIndex 1.3.6.1.2.1.12.3.1.1
The value of ifIndex, defined in [4,6], of an interface which recognizes this entry's address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ifExtnsRcvAddress 1.3.6.1.2.1.12.3.1.2
An address for which the system will accept packets/frames on this entry's interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

ifExtnsRcvAddrStatus 1.3.6.1.2.1.12.3.1.3
This object has the value nonVolatile(4) for those entries in the table which are valid and will not be deleted by the next restart of the managed system. Entries having the value volatile(3) are valid and exist, but have not been saved, so that will not exist after the next restart of the managed system. Entries having the value other(1) are valid and exist but are not classified as to whether they will continue to exist after the next restart. Entries having the value invalid(2) are invalid and do not represent an address for which an interface accepts frames. Setting an object instance to one of the values other(1), volatile(3), or nonVolatile(4) causes the corresponding entry to exist or continue to exist, and to take on the respective status as regards the next restart of the managed system. Setting an object instance to the value invalid(2) causes the corresponding entry to become invalid or cease to exist. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ifExtnsRcvAddrStatus object instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2), volatile(3), nonVolatile(4)  

dot3Table 1.3.6.1.2.1.10.7.1
Status information and control variables for a collection of ethernet-like interfaces attached to a particular system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot3Entry

dot3Entry 1.3.6.1.2.1.10.7.1.1
Status information and control variables for a particular interface to an ethernet-like medium.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Dot3Entry  

dot3Index 1.3.6.1.2.1.10.7.1.1.1
An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dot3InitializeMac 1.3.6.1.2.1.10.7.1.1.2
The initialization status of the MAC and PLS (Physical Layer Signalling) subsystems for a particular interface. The value initialized(1) signifies that the subsystems for a particular interface have been previously initialized; the value uninitialized(2) signifies that they have not been previously initialized. Each alteration of an instance of this object to either of the values initialized(1) or uninitialized(2) is analogous to an invocation of the initializeMAC action defined in [9] and has the effect of (re-)initializing the MAC and PLS subsystems for the associated interface. In particular, all management counters pertaining to the MAC and PLS subsystems for said interface are reset to zero; the receive and transmit layer management state variables (receiveEnabled and transmitEnabled in [9]) are set to enable reception and transmission of frames; the promiscuous receive function is disabled; and multicast reception is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER initialized(1), uninitialized(2)  

dot3MacSubLayerStatus 1.3.6.1.2.1.10.7.1.1.3
The operational status of the MAC sublayer for a particular interface. The value enabled(1) signifies that the MAC sublayer for said interface is operational for both transmitting and receiving frames -- that is, that the value of both the receive and transmit layer management state variables (receiveEnabled and transmitEnabled in [9]) for said interface are true. The value disabled(2) signifies that the MAC sublayer for said interface is not operational for either transmitting or receiving frames. In particular, the value of an instance of this object is disabled(2) whenever the value of the corresponding instance of the dot3Enabled object is false(2). Each alteration of an instance of this object to the value enabled(1) is analogous to an invocation of the enableMACSublayer action defined in [9] and has the effect of starting normal transmit and receive operations (from the ``idle'' state) on the associated interface. In particular, such an alteration has the effect of resetting the PLS for said interface and of setting the receive and transmit layer management state variables (receiveEnabled and transmitEnabled in [9]) to be true. Each alteration of an instance of this object to the value disabled(2) is analogous to an invocation of the disableMACSublayer action defined in [9] and has the effect of terminating transmit and receive operations on the associated interface. In particular, such an alteration has the effect of setting the receive and transmit layer management state variables (receiveEnabled and transmitEnabled in [9]) to be false. Any transmissions/receptions in progress are completed before operation is terminated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot3MulticastReceiveStatus 1.3.6.1.2.1.10.7.1.1.4
The multicast receive status for a particular interface. The value enabled(1) signifies that reception of multicast frames by the MAC sublayer is enabled on said interface. The value disabled(2) signifies that reception of multicast frames by the MAC sublayer is not enabled on said interface. Each alteration of an instance of this object to the value enabled(1) is analogous to an invocation of the enableMulticastReceive action defined in [9] and has the effect of enabling multicast frame reception on the associated interface. Actual reception of multicast frames is only possible on an interface when the values for the associated instances of the dot3MulticastReceiveStatus and dot3MacSubLayerStatus objects are enabled(1) and enabled(1), respectively. Each alteration of an instance of this object to the value disabled(2) is analogous to an invocation of the disableMulticastReceive action defined in [9] and has the effect of inhibiting multicast frame reception on the associated interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot3TxEnabled 1.3.6.1.2.1.10.7.1.1.5
The transmit layer management state variable (transmitEnabled as defined in [9]) for a particular interface. The value true(1) signifies that the MAC frame transmission is enabled on said interface. The value false(2) signifies that the MAC frame transmission is inhibited on said interface. In particular, the value of an instance of this object is false(2) whenever the value of the corresponding instance of the dot3MacSubLayerStatus object is disabled(2). Each alteration of an instance of this object to the value true(1) is analogous to an invocation of the enableTransmit action defined in [9] and has the effect of enabling MAC sublayer frame transmission on the associated interface. In particular, such an alteration has the effect of setting the transmit layer management state variable (transmitEnabled in [9]) for said interface to be true. Each alteration of an instance of this object to the value false(2) is analogous to an invocation of the disableTransmit action defined in [9] and has the effect of inhibiting MAC sublayer frame transmission on the associated interface. In particular, such an alteration has the effect of setting the transmit layer management state variable (transmitEnabled in [9]) for said interface to be false. Any transmissions in progress are completed before transmission is inhibited.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

dot3TestTdrValue 1.3.6.1.2.1.10.7.1.1.6
The number of 10 MHz ticks which elapsed between the beginning of a TDR measurement and the collision which ended it, for the most recently executed TDR test. If no TDR test has been executed, or the last TDR value is not available, this object has the value 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dot3StatsTable 1.3.6.1.2.1.10.7.2
Statistics for a collection of ethernet-like interfaces attached to a particular system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot3StatsEntry

dot3StatsEntry 1.3.6.1.2.1.10.7.2.1
Statistics for a particular interface to an ethernet-like medium.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Dot3StatsEntry  

dot3StatsIndex 1.3.6.1.2.1.10.7.2.1.1
An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dot3StatsAlignmentErrors 1.3.6.1.2.1.10.7.2.1.2
A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of [9], counted exclusively according to the error status presented to the LLC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsFCSErrors 1.3.6.1.2.1.10.7.2.1.3
A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of [9], counted exclusively according to the error status presented to the LLC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsSingleCollisionFrames 1.3.6.1.2.1.10.7.2.1.4
A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts or ifOutNUcastPkts object and is not counted by the corresponding instance of the dot3StatsMultipleCollisionFrames object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsMultipleCollisionFrames 1.3.6.1.2.1.10.7.2.1.5
A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts or ifOutNUcastPkts object and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsSQETestErrors 1.3.6.1.2.1.10.7.2.1.6
A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of [12] and its generation is described in section 7.2.4.6 of the same document.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsDeferredTransmissions 1.3.6.1.2.1.10.7.2.1.7
A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsLateCollisions 1.3.6.1.2.1.10.7.2.1.8
The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 Mbit/s system. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsExcessiveCollisions 1.3.6.1.2.1.10.7.2.1.9
A count of frames for which transmission on a particular interface fails due to excessive collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsInternalMacTransmitErrors 1.3.6.1.2.1.10.7.2.1.10
A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsLateCollisions object, the dot3StatsExcessiveCollisions object, the dot3StatsCarrierSenseErrors object, or the dot3StatsExcessiveDeferrals object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of transmission errors on a particular interface that are not otherwise counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsCarrierSenseErrors 1.3.6.1.2.1.10.7.2.1.11
The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count represented by an instance of this object is incremented at most once per transmission attempt, even if the carrier sense condition fluctuates during a transmission attempt.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsExcessiveDeferrals 1.3.6.1.2.1.10.7.2.1.12
A count of frames for which transmission on a particular interface is deferred for an excessive period of time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsFrameTooLongs 1.3.6.1.2.1.10.7.2.1.13
A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of [9], counted exclusively according to the error status presented to the LLC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsInRangeLengthErrors 1.3.6.1.2.1.10.7.2.1.14
A count of frames received on a particular interface with a length field value that falls between the minimum unpadded LLC data size and the maximum allowed LLC data size inclusive and that does not match the number of LLC data octets received. The count represented by an instance of this object also includes frames for which the length field value is less than the minimum unpadded LLC data size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsOutOfRangeLengthFields 1.3.6.1.2.1.10.7.2.1.15
A count of frames received on a particular interface for which the length field value exceeds the maximum allowed LLC data size. The count represented by an instance of this object is not incremented in implementations that observe Ethernet encapsulation conventions (by which the IEEE 802.3 length field is interpreted as the Ethernet Type field).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3StatsInternalMacReceiveErrors 1.3.6.1.2.1.10.7.2.1.16
A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsFrameTooLongs object, the dot3StatsAlignmentErrors object, the dot3StatsFCSErrors object, the dot3StatsInRangeLengthErrors object, or the dot3StatsOutOfRangeLengthFields object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dot3ChipSets 1.3.6.1.2.1.10.7.8
OBJECT IDENTIFIER    

dot3ChipSetAMD 1.3.6.1.2.1.10.7.8.1
OBJECT IDENTIFIER    

dot3ChipSetAMD7990 1.3.6.1.2.1.10.7.8.1.1
OBJECT IDENTIFIER    

dot3ChipSetAMD79900 1.3.6.1.2.1.10.7.8.1.2
OBJECT IDENTIFIER    

cConstellationAvailableBuffers 1.3.6.1.4.1.187.4.1
Count of available data buffers
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cConstellationInitialBuffers 1.3.6.1.4.1.187.4.2
Initial amount of buffers available at system startup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cConstallationBufferDataLength 1.3.6.1.4.1.187.4.3
Number of data bytes that can be stored in each buffer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 64..65535  

cConstellationInstructionRam 1.3.6.1.4.1.187.4.4
Number of bytes of system instruction ram available. This is fast, zero-wait-state RAM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cConstellationGlobalDataRam 1.3.6.1.4.1.187.4.5
Number of bytes of global data ram available. This is RAM contains I/O buffers and other data structures for which zero-wait-state access is not required by the CPU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cConstellationFastDataRam 1.3.6.1.4.1.187.4.6
Number of bytes of fast data ram available. This is RAM contains data structures for which the CPU requires zero-wait-state access, such as the bridge forwarding database.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cDot3Table 1.3.6.1.4.1.187.3.10.7.1
Extended status information for the Constellation specific LANCE and ILACC drivers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CDot3Entry

cDot3Entry 1.3.6.1.4.1.187.3.10.7.1.1
Proprietary status information for a particular interface
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CDot3Entry  

cDot3Index 1.3.6.1.4.1.187.3.10.7.1.1.1
An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cDot3Disables 1.3.6.1.4.1.187.3.10.7.1.1.2
Number of LANCE/ILLAC disconnects that occured because the interface was disabled
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cDot3MauDisconnect 1.3.6.1.4.1.187.3.10.7.1.1.3
Number of LANCE/ILLAC disconnects that occured because m_lance_cs_mau_connected was 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cDot3Babbles 1.3.6.1.4.1.187.3.10.7.1.1.4
Number of times the LANCE/ILACC Babble bit was set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cDot3MerrDisconnect 1.3.6.1.4.1.187.3.10.7.1.1.5
Number of LANCE/ILLAC disconnects that occured because the memory error bit was set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cDot3TxonDisconnect 1.3.6.1.4.1.187.3.10.7.1.1.6
Number of LANCE/ILLAC disconnects that occured because the txon bit was off.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cDot3RxonDisconnect 1.3.6.1.4.1.187.3.10.7.1.1.7
Number of LANCE/ILLAC disconnects that occured because the rxon bit was off.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cDot3XmitFailure 1.3.6.1.4.1.187.3.10.7.1.1.8
Number of LANCE/ILLAC disconnects that occured because no packets were received and every transmit attempt resulted in a failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cDot3XmitBuffErr 1.3.6.1.4.1.187.3.10.7.1.1.9
Number of LANCE/ILLAC transmit buffer errors that occured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cDot3XmitUflo 1.3.6.1.4.1.187.3.10.7.1.1.10
Number of LANCE/ILLAC transmit underflo errors that occured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cDot3RcvBuffErr 1.3.6.1.4.1.187.3.10.7.1.1.11
Number of LANCE/ILLAC receive buffer errors that occured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cDot3RcvOflo 1.3.6.1.4.1.187.3.10.7.1.1.12
Number of LANCE/ILLAC receive overflo errors that occured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cDot3Startless 1.3.6.1.4.1.187.3.10.7.1.1.13
Number of times that the driver did not get a start-of-message when one was expected. This if for reception.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cDot3Endless 1.3.6.1.4.1.187.3.10.7.1.1.14
Number of times that the driver detected the start of one packet without detecting the end of the previous packet. This is for reception.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cConfig 1.3.6.1.4.1.187.6
OBJECT IDENTIFIER    

cMonitor 1.3.6.1.4.1.187.7
OBJECT IDENTIFIER    

cConfigSystem 1.3.6.1.4.1.187.6.1
OBJECT IDENTIFIER    

cConfSysInfo 1.3.6.1.4.1.187.6.1.1
OBJECT IDENTIFIER    

cConfOperAcct 1.3.6.1.4.1.187.6.1.2
OBJECT IDENTIFIER    

cConfigLan 1.3.6.1.4.1.187.6.2
OBJECT IDENTIFIER    

cConfigEther 1.3.6.1.4.1.187.6.2.1
OBJECT IDENTIFIER    

cConfigTwp 1.3.6.1.4.1.187.6.2.2
OBJECT IDENTIFIER    

cConfigWan 1.3.6.1.4.1.187.6.3
OBJECT IDENTIFIER    

cConfigSerChan 1.3.6.1.4.1.187.6.3.1
OBJECT IDENTIFIER    

cConfigWideAreaGroups 1.3.6.1.4.1.187.6.3.3
OBJECT IDENTIFIER    

cConfigBridge 1.3.6.1.4.1.187.6.5
OBJECT IDENTIFIER    

cConfigLogicalBridge 1.3.6.1.4.1.187.6.5.1
OBJECT IDENTIFIER    

cIpAddress 1.3.6.1.4.1.187.6.6
OBJECT IDENTIFIER    

cConfigIpRouter 1.3.6.1.4.1.187.6.7
OBJECT IDENTIFIER    

cConfigAcceptLists 1.3.6.1.4.1.187.6.7.5
OBJECT IDENTIFIER    

cConfigPropagateLists 1.3.6.1.4.1.187.6.7.6
OBJECT IDENTIFIER    

cIpFilters 1.3.6.1.4.1.187.6.7.9
OBJECT IDENTIFIER    

cConfigIpxRouter 1.3.6.1.4.1.187.6.8
OBJECT IDENTIFIER    

cConfigIpxBridgeIf 1.3.6.1.4.1.187.6.8.1
OBJECT IDENTIFIER    

cConfigIpxRouterFilters 1.3.6.1.4.1.187.6.8.2
OBJECT IDENTIFIER    

cConfigAppleTalk 1.3.6.1.4.1.187.6.9
OBJECT IDENTIFIER    

cConfigAtIf 1.3.6.1.4.1.187.6.9.1
OBJECT IDENTIFIER    

cConfigNetProtocol 1.3.6.1.4.1.187.6.10
OBJECT IDENTIFIER    

cConfigSnmp 1.3.6.1.4.1.187.6.10.1
OBJECT IDENTIFIER    

cConfigArp 1.3.6.1.4.1.187.6.10.2
OBJECT IDENTIFIER    

cConfigTcp 1.3.6.1.4.1.187.6.10.3
OBJECT IDENTIFIER    

cConfigTelnet 1.3.6.1.4.1.187.6.10.4
OBJECT IDENTIFIER    

cConfigHostTable 1.3.6.1.4.1.187.6.10.5
OBJECT IDENTIFIER    

cConfigSoftwareQueues 1.3.6.1.4.1.187.6.11
OBJECT IDENTIFIER    

cConfigFlashDnld 1.3.6.1.4.1.187.6.14
OBJECT IDENTIFIER    

cMonitorSystem 1.3.6.1.4.1.187.7.1
OBJECT IDENTIFIER    

cMonitorSystemInfo 1.3.6.1.4.1.187.7.1.1
OBJECT IDENTIFIER    

cMonitorHeapStats 1.3.6.1.4.1.187.7.1.2
OBJECT IDENTIFIER    

cMonitorLoginHistory 1.3.6.1.4.1.187.7.1.3
OBJECT IDENTIFIER    

cMonitorBridges 1.3.6.1.4.1.187.7.2
OBJECT IDENTIFIER    

cMonitorPhysInterfaces 1.3.6.1.4.1.187.7.3
OBJECT IDENTIFIER    

cMonitorProto 1.3.6.1.4.1.187.7.4
OBJECT IDENTIFIER    

cTcpStats 1.3.6.1.4.1.187.7.4.3
OBJECT IDENTIFIER    

cIpStats 1.3.6.1.4.1.187.7.4.4
OBJECT IDENTIFIER    

cIcmpStats 1.3.6.1.4.1.187.7.4.5
OBJECT IDENTIFIER    

cWanStats 1.3.6.1.4.1.187.7.4.9
OBJECT IDENTIFIER    

cMonitorIpRouter 1.3.6.1.4.1.187.7.5
OBJECT IDENTIFIER    

cIpRoutingStats 1.3.6.1.4.1.187.7.5.1
OBJECT IDENTIFIER    

cEgpStats 1.3.6.1.4.1.187.7.5.3
OBJECT IDENTIFIER    

cRipStats 1.3.6.1.4.1.187.7.5.5
OBJECT IDENTIFIER    

cHelloStats 1.3.6.1.4.1.187.7.5.6
OBJECT IDENTIFIER    

cMonitorIpxRouter 1.3.6.1.4.1.187.7.6
OBJECT IDENTIFIER    

cIpxStats 1.3.6.1.4.1.187.7.6.1
OBJECT IDENTIFIER    

cMonitorAtRouter 1.3.6.1.4.1.187.7.7
OBJECT IDENTIFIER    

cAtRouterStats 1.3.6.1.4.1.187.7.7.1
OBJECT IDENTIFIER    

cDiagnostics 1.3.6.1.4.1.187.7.8
OBJECT IDENTIFIER    

cLocalTime 1.3.6.1.4.1.187.6.1.1.1
This entity is a string in the format hh:mm [am|pm] representing the local time on the device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

cLocalDate 1.3.6.1.4.1.187.6.1.1.2
This entity is a string in the format mm/dd/yy or dd-mm-yy representing the local date on the device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

cLocalCtpMode 1.3.6.1.4.1.187.6.1.1.4
This entity determines whether the local console is using standard vt100 key mappings or extended key mappings.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER standard(1), extended(2)  

cRemoteCtpMode 1.3.6.1.4.1.187.6.1.1.5
This entity determines whether remotely logged in consoles use standard vt100 key mappings or extended key mappings.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER standard(1), extended(2)  

cBridgeStatsAveraging 1.3.6.1.4.1.187.6.1.1.6
This entity determines whether the bridge statistics screens use time averaged or absolute values
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cBranchTargetCache 1.3.6.1.4.1.187.6.1.1.7
This entity determines whether the CPU's branch target cache is enabled or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cOperAcctTable 1.3.6.1.4.1.187.6.1.2.1
This table allows an administrator to configure the operar accounts which grant access to the system. There are up to 60 accounts in the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OperAcctEntry

cOperAcctEntry 1.3.6.1.4.1.187.6.1.2.1.1
Information on one entry in the operator accounts database.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OperAcctEntry  

cOperIndex 1.3.6.1.4.1.187.6.1.2.1.1.1
This variable indexes the table of operator accounts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

cOperID 1.3.6.1.4.1.187.6.1.2.1.1.2
The name of the account
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..8)  

cOperPriv 1.3.6.1.4.1.187.6.1.2.1.1.3
This variable gives the privileges associated with a particular account. Valid values for the field are: privNone delete account, privOper operator privileges, privAdmin administrator privileges. Administrators are allowed to configure security.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER privNone(1), privOper(2), privAdmin(3)  

cOperPasswd 1.3.6.1.4.1.187.6.1.2.1.1.4
This is the password assocated with the given account. A get on this variable will return an empty string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..8)  

cOperStatus 1.3.6.1.4.1.187.6.1.2.1.1.5
This is the current status of the row. The only valid values for a manager to set this value to are createRequest(2) or invalid(4). The agent may return any of valid(1), underCreation(3) or invalid(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), createRequest(2), underCreation(3), invalid(4)  

cSnmpCommunityTable 1.3.6.1.4.1.187.6.10.1.1
Constellation proprietary information about configured SNMP communities. Managers can configure communities, but at least one community must be configured via the console for the manager to be able to communicate with the agent in the first place.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnmpCommunityEntry

cSnmpCommunityEntry 1.3.6.1.4.1.187.6.10.1.1.1
Each entry contains information about the name of a community, the destination to which to send traps, the interface to report on, and the access allowed by this community.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnmpCommunityEntry  

cSnmpCommunityIndex 1.3.6.1.4.1.187.6.10.1.1.1.1
This variable is a unique index into the snmp community table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cSnmpCommunity 1.3.6.1.4.1.187.6.10.1.1.1.2
This variable represents the name of a community which the agent recognizes. Each community must have a unique name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

cSnmpCommunityIf 1.3.6.1.4.1.187.6.10.1.1.1.3
This variable associates an interface with the given community. Each community is associated with exactly one interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER lb0(1), lb1(2), lb2(3), lb3(4), wa0(5), wa1(6), router(1024)  

cSnmpCommunityAccess 1.3.6.1.4.1.187.6.10.1.1.1.4
This variable determines whether the agent using this community may set or only get variables in the MIB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER readOnly(1), readWrite(2)  

cSnmpCommunityTrapAddress 1.3.6.1.4.1.187.6.10.1.1.1.5
This variable represents the address to which the agent will send traps on behalf of the given community.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

cSnmpCommunityTrapPort 1.3.6.1.4.1.187.6.10.1.1.1.6
This variable represents the port to which the agent will send traps on behalf of the given community.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cSnmpCommunityTrapEnabled 1.3.6.1.4.1.187.6.10.1.1.1.7
This variable determines whether the agent will send traps on behalf of the given community.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

cTcpKeepalive 1.3.6.1.4.1.187.6.10.3.1
This variable describes, in minutes, how long the TCP waits between keepalive probes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cTelnetPort 1.3.6.1.4.1.187.6.10.4.1
This parameter tells the TELNET protocol on which to listen for incoming calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cTelnetNegotiate 1.3.6.1.4.1.187.6.10.4.2
This parameter tells the TELNET protocol whether to negotiate negotiable parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

cEtherSWQTable 1.3.6.1.4.1.187.6.11.1
This table allows contains information about the maximum size and maximum lifetime of each of the packet queues on the LAN ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtherSWQEntry

cEtherSWQEntry 1.3.6.1.4.1.187.6.11.1.1
Each entry contains software queue information for one interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  EtherSWQEntry  

cEtherSWQIndex 1.3.6.1.4.1.187.6.11.1.1.1
This index is the number of one of the ethernet interfaces. The port names are mapped to integers thusly: e1a - e8a are entries 1-8; e1b - e8b are entries 9-16.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

cEtherSWQMaxSize 1.3.6.1.4.1.187.6.11.1.1.2
The maximum number of packets that may be in the queue at one time for this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..512  

cEtherSWQMaxTtl 1.3.6.1.4.1.187.6.11.1.1.3
The maximum time in milliseconds that a packet may remain in the queue for this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..500  

cResetNovram 1.3.6.1.4.1.187.6.12
When this entity is set, novram is cleared.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cRestartSystem 1.3.6.1.4.1.187.6.13
When this entity is set, the system is restarted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cFlashIpAddress 1.3.6.1.4.1.187.6.14.1
IP address of server with flash download file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

cFlashFileName 1.3.6.1.4.1.187.6.14.2
Name of flash download file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..40)  

cFlashBootFlag 1.3.6.1.4.1.187.6.14.3
Flag to determine whether or not to load new flash code.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

cFlashGatewayIpAddr 1.3.6.1.4.1.187.6.14.4
IP address of nearest gateway. This variable should only be set if the TFTP server is not on the same network as the bridge.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

cLoginTable 1.3.6.1.4.1.187.7.1.3.1
This table gives a record of recent logins to the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LoginEntry

cLoginEntry 1.3.6.1.4.1.187.7.1.3.1.1
Each entry describes one login to the system, either remote or local.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LoginEntry  

cLoginIndex 1.3.6.1.4.1.187.7.1.3.1.1.1
This variable indexes the entries in the Login History Table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cLoginUser 1.3.6.1.4.1.187.7.1.3.1.1.2
This variable contains the login name of the user for the current row in the table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..8)  

cLoginLocal 1.3.6.1.4.1.187.7.1.3.1.1.3
This variable describes whether the entry specified in this row of the table represents a login from the local console (yes(1)) or remotely (no(2)).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

cLoginRemote 1.3.6.1.4.1.187.7.1.3.1.1.4
This entry gives the remote IP address of a remote login.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

cLoginFails 1.3.6.1.4.1.187.7.1.3.2
This variable returns the number of attempted logins which have failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cNodeByAddressTable 1.3.6.1.4.1.187.7.2.3
This Table allows the manager to map MAC addresses to hash buckets and ports in the router.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NodeByAddressEntry

cNodeByAddressEntry 1.3.6.1.4.1.187.7.2.3.1
Each entry contains the entry for one MAC address.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NodeByAddressEntry  

cNodeByAddressAddr 1.3.6.1.4.1.187.7.2.3.1.1
This variable is the MAC address for which the manager wishes to find the hash bucket and port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

cNodeByAddressBridge 1.3.6.1.4.1.187.7.2.3.1.2
This variable is the bridge on which the given MAC address is reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lb0(1), lb1(2), lb2(3), lb3(4)  

cNodeByAddressPort 1.3.6.1.4.1.187.7.2.3.1.3
This variable is the port through which the given MAC address is reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cNodeByAddressStatus 1.3.6.1.4.1.187.7.2.3.1.4
This variable gives the status of the given MAC address. If the status is 'permanent,' the contents of cNodeByAddressPort have no meaning.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER permanent(1), port(2), appeared(3), notAppeared(4)  

cNodeByHashTable 1.3.6.1.4.1.187.7.2.4
This table may be used by the manager to read the contents of the node table, in the order in which entries appear in the hash table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NodeByHashEntry

cNodeByHashEntry 1.3.6.1.4.1.187.7.2.4.1
Each entry in this table represents one mapping of a MAC address to a bridge.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NodeByHashEntry  

cNodeByHashIndex 1.3.6.1.4.1.187.7.2.4.1.1
This variable is an abstract index into the hash table. The first entry in bucket 0 is entry 1, the second entry in bucket 0 is 2, the first entry in bucket 1 is 3, etc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cNodeByHashBucket 1.3.6.1.4.1.187.7.2.4.1.2
This entry describes in which bucket in the hash table the given entry appears.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..511  

cNodeByHashAddress 1.3.6.1.4.1.187.7.2.4.1.3
This entry describes the MAC address of the given entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

cNodeByHashBridge 1.3.6.1.4.1.187.7.2.4.1.4
This variable is the bridge on which the given MAC address is reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lb0(1), lb1(2), lb2(3), lb3(4)  

cNodeByHashPort 1.3.6.1.4.1.187.7.2.4.1.5
This variable describes the port through which the corresponding cNodeByHashAddress is accessed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cNodeByHashStatus 1.3.6.1.4.1.187.7.2.4.1.6
This variable gives the status of the given MAC address. If the status is 'permanent,' the contents of cNodeByHashPort have no meaning.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER permanent(1), port(2), appeared(3), notAppeared(4)  

cHardwareStatusTable 1.3.6.1.4.1.187.7.3.1
This table provides a brief description of of the contents and status of each hardware slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HardwareStatusEntry

cHardwareStatusEntry 1.3.6.1.4.1.187.7.3.1.1
Each entry in this table provides information about one LAN or WAN hardware slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HardwareStatusEntry  

cHardwareStatusIndex 1.3.6.1.4.1.187.7.3.1.1.1
This variable is the index into the table of values.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..31  

cHardwareStatusSlot 1.3.6.1.4.1.187.7.3.1.1.2
This variable provides the slot number as it would appear on the 'Hardware Configuration' screen of the console interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..11  

cHardwareStatusContents 1.3.6.1.4.1.187.7.3.1.1.3
This variable describes the hardware associated with a given slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cHardwareStatusMacAddr 1.3.6.1.4.1.187.7.3.1.1.4
This variable contains the MAC address of the hardware in the given slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

cHardwareStatusSerialNo 1.3.6.1.4.1.187.7.3.1.1.5
This variable returns the constellation serial number for the part in the accessed slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cHardwareStatusRevision 1.3.6.1.4.1.187.7.3.1.1.6
This variable describes the revision of the hardware in the accessed slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cHardwareStatusStatus 1.3.6.1.4.1.187.7.3.1.1.7
This variable gives the status of the hardware.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cClearErrorLog 1.3.6.1.4.1.187.7.8.1
Setting this variable erases the accumulated error log from NOVRAM. Reading it is meaningless.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cErrorLogTable 1.3.6.1.4.1.187.7.8.2
This table contains the text of errors detected. Errors are stored in nonvolatile memory, and hence preserved across reboots of the box.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ErrorLogEntry

cErrorLogEntry 1.3.6.1.4.1.187.7.8.2.1
Each entry contains the text of one error message.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ErrorLogEntry  

cErrorLogIndex 1.3.6.1.4.1.187.7.8.2.1.1
This is the index of an error message, with higher indices indicating more recent messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cErrorLogMessage 1.3.6.1.4.1.187.7.8.2.1.2
This is the text of an error message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..80)  

newRoot 1
The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer immediately subsequent to its election.
TRAP-TYPE    

topologyChange 2
A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition.
TRAP-TYPE