LBHUB-BLC-MIB

File: LBHUB-BLC-MIB.mib (73470 bytes)

Imported modules

RFC1155-SMI

Imported symbols

mgmt NetworkAddress IpAddress
Counter Gauge TimeTicks
internet OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

PhysAddress  
OCTET STRING    

IfExtnsEntry  
SEQUENCE    
  ifExtnsIfIndex INTEGER
  ifExtnsChipSet OBJECT IDENTIFIER
  ifExtnsRevWare DisplayString
  ifExtnsMulticastsTransmittedOks Counter
  ifExtnsBroadcastsTransmittedOks Counter
  ifExtnsMulticastsReceivedOks Counter
  ifExtnsBroadcastsReceivedOks Counter
  ifExtnsPromiscuous INTEGER

IfExtnsRcvAddrEntry  
SEQUENCE    
  ifExtnsRcvAddrIfIndex INTEGER
  ifExtnsRcvAddress PhysAddress
  ifExtnsRcvAddrStatus INTEGER

Dot3Entry  
SEQUENCE    
  dot3Index INTEGER
  dot3InitializeMac INTEGER
  dot3MacSubLayerStatus INTEGER
  dot3MulticastReceiveStatus INTEGER
  dot3TxEnabled INTEGER
  dot3TestTdrValue Gauge

Dot3StatsEntry  
SEQUENCE    
  dot3StatsIndex INTEGER
  dot3StatsAlignmentErrors Counter
  dot3StatsFCSErrors Counter
  dot3StatsSingleCollisionFrames Counter
  dot3StatsMultipleCollisionFrames Counter
  dot3StatsSQETestErrors Counter
  dot3StatsDeferredTransmissions Counter
  dot3StatsLateCollisions Counter
  dot3StatsExcessiveCollisions Counter
  dot3StatsInternalMacTransmitErrors Counter
  dot3StatsCarrierSenseErrors Counter
  dot3StatsExcessiveDeferrals Counter
  dot3StatsFrameTooLongs Counter
  dot3StatsInRangeLengthErrors Counter
  dot3StatsOutOfRangeLengthFields Counter
  dot3StatsInternalMacReceiveErrors Counter

BLCAgentManagementEntry  
SEQUENCE    
  blcAgentManagementAddr IpAddress
  blcAgentManagementAccess INTEGER

BLCAgentTrapReceiverEntry  
SEQUENCE    
  blcAgentTrapReceiverAddr IpAddress
  blcAgentTrapType INTEGER
  blcAgentTrapReceiverComm DisplayString Size(0..20)
  blcAgentTrapLevel INTEGER

BlcProtocolFilterEntry  
SEQUENCE    
  blcProtocolIndex INTEGER
  blcProtocolValid INTEGER
  blcProtocolState INTEGER
  blcProtocolIdentifier OCTET STRING Size(0..16)
  blcProtocolOffset INTEGER
  blcProtocolMask OCTET STRING Size(4)
  blcProtocolMatch OCTET STRING Size(4)
  blcProtocolDecision INTEGER
  blcProtocolAction INTEGER

AccessGroupMemberShortTableEntry  
SEQUENCE    
  agsMemberAddress OCTET STRING Size(6)
  agsMemberValid INTEGER
  agsMembers OCTET STRING Size(2)

AccessGroupMemberFullTableEntry  
SEQUENCE    
  agfMemberAddress OCTET STRING Size(6)
  agfMemberValid INTEGER
  agfMemberFreeUserGroup INTEGER
  agfMemberUserGroup1 INTEGER
  agfMemberUserGroup2 INTEGER
  agfMemberUserGroup3 INTEGER
  agfMemberUserGroup4 INTEGER
  agfMemberUserGroup5 INTEGER
  agfMemberUserGroup6 INTEGER
  agfMemberUserGroup7 INTEGER
  agfMemberUserGroup8 INTEGER

AccessUserGroupNameTableEntry  
SEQUENCE    
  accessUserGroupNameIndex INTEGER
  accessUserGroupNameIdentifier DisplayString Size(0..32)

AccessGroupViolationTableEntry  
SEQUENCE    
  agViolationPort INTEGER
  agViolations Counter

Defined Values

mib-2 1.3.6.1.2.1
OBJECT IDENTIFIER    

system 1.3.6.1.2.1.1
OBJECT IDENTIFIER    

interfaces 1.3.6.1.2.1.2
OBJECT IDENTIFIER    

at 1.3.6.1.2.1.3
OBJECT IDENTIFIER    

ip 1.3.6.1.2.1.4
OBJECT IDENTIFIER    

icmp 1.3.6.1.2.1.5
OBJECT IDENTIFIER    

udp 1.3.6.1.2.1.7
OBJECT IDENTIFIER    

egp 1.3.6.1.2.1.8
OBJECT IDENTIFIER    

cmot 1.3.6.1.2.1.9
OBJECT IDENTIFIER    

transmission 1.3.6.1.2.1.10
OBJECT IDENTIFIER    

snmp 1.3.6.1.2.1.11
OBJECT IDENTIFIER    

ifExtensions 1.3.6.1.2.1.12
OBJECT IDENTIFIER    

dot3 1.3.6.1.2.1.10.7
OBJECT IDENTIFIER    

dot3ChipSets 1.3.6.1.2.1.10.7.8
OBJECT IDENTIFIER    

dot3ChipSetAMD 1.3.6.1.2.1.10.7.8.1
OBJECT IDENTIFIER    

dot3ChipSetAMD7990 1.3.6.1.2.1.10.7.8.1.1
OBJECT IDENTIFIER    

dot1dBridge 1.3.6.1.2.1.17
OBJECT IDENTIFIER    

dot1dBase 1.3.6.1.2.1.17.1
OBJECT IDENTIFIER    

dot1dStp 1.3.6.1.2.1.17.2
OBJECT IDENTIFIER    

dot1dTp 1.3.6.1.2.1.17.4
OBJECT IDENTIFIER    

dot1dStatic 1.3.6.1.2.1.17.5
OBJECT IDENTIFIER    

private 1.3.6.1.4
OBJECT IDENTIFIER    

enterprises 1.3.6.1.4.1
OBJECT IDENTIFIER    

a3Com 1.3.6.1.4.1.43
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.43.1
OBJECT IDENTIFIER    

brouter 1.3.6.1.4.1.43.1.4
OBJECT IDENTIFIER    

lBridgeECS 1.3.6.1.4.1.43.1.4.3
OBJECT IDENTIFIER    

blc 1.3.6.1.4.1.43.12
OBJECT IDENTIFIER    

blcAgent 1.3.6.1.4.1.43.12.1
OBJECT IDENTIFIER    

blcControl 1.3.6.1.4.1.43.12.2
OBJECT IDENTIFIER    

blcDataBase 1.3.6.1.4.1.43.12.3
OBJECT IDENTIFIER    

blcPcolFilter 1.3.6.1.4.1.43.12.4
OBJECT IDENTIFIER    

accessGroupDBase 1.3.6.1.4.1.43.12.5
OBJECT IDENTIFIER    

ecsXENDOFMIB 1.3.6.1.4.1.43.12.255
OBJECT IDENTIFIER    

ifExtnsTable 1.3.6.1.2.1.12.1
A list of interfaces extension entries. The number of entries is given by the value of ifNumber, defined in [4,6].
OBJECT-TYPE    
  SEQUENCE OF  
    IfExtnsEntry

ifExtnsEntry 1.3.6.1.2.1.12.1.1
An extension to the interfaces entry, defined in [4,6], containing additional objects at the subnetwork layer and below for a particular interface.
OBJECT-TYPE    
  IfExtnsEntry  

ifExtnsIfIndex 1.3.6.1.2.1.12.1.1.1
The value of this object identifies the interface for which this entry contains extended management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in [4,6], for the same interface.
OBJECT-TYPE    
  INTEGER  

ifExtnsChipSet 1.3.6.1.2.1.12.1.1.2
This object identifies the hardware chip set being used in the interface. The assignment of OBJECT IDENTIFIERs to various types of hardware chip sets is managed by the IANA. If the hardware chip set is unknown, the object identifier unknownChipSet OBJECT IDENTIFIER ::= { 0 0 } is returned. Note that unknownChipSet is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

ifExtnsRevWare 1.3.6.1.2.1.12.1.1.3
An arbitrary octet string that describes the firmware version of this interface. It is intended that this should be human readable. It must only contain ASCII printable characters. Typically this will be the firmware version of the main interface software.
OBJECT-TYPE    
  DisplayString Size(0..255)  

ifExtnsMulticastsTransmittedOks 1.3.6.1.2.1.12.1.1.4
The count of frames successfully transmitted to a subnetwork or link-layer multicast destination address other than a broadcast address. For a MAC layer protocol, this includes both Group and Functional addresses.
OBJECT-TYPE    
  Counter  

ifExtnsBroadcastsTransmittedOks 1.3.6.1.2.1.12.1.1.5
The count of frames successfully transmitted to a subnetwork or link-layer broadcast addresses. It does not include frames sent to a multicast address.
OBJECT-TYPE    
  Counter  

ifExtnsMulticastsReceivedOks 1.3.6.1.2.1.12.1.1.6
The count of frames successfully received that are directed to an active subnetwork or link-layer multicast address (for a MAC layer protocol, this includes both Group and Functional addresses). This does not include frames directed to a broadcast address, nor frames received with errors.
OBJECT-TYPE    
  Counter  

ifExtnsBroadcastsReceivedOks 1.3.6.1.2.1.12.1.1.7
The count of frames successfully received that are directed to a subnetwork or link-layer broadcast address. This does not include frames received with errors.
OBJECT-TYPE    
  Counter  

ifExtnsPromiscuous 1.3.6.1.2.1.12.1.1.8
This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the media. The value true(1) is only legal on certain types of media. If legal, setting this object to a value of true(1) may require the interface to be reset before becoming effective.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

ifExtnsRcvAddrTable 1.3.6.1.2.1.12.3
This table contains an entry for each address (broadcast, multicast, or uni-cast) for which the system will receive packets/ frames on a particular interface. When an interface is operating in promiscuous mode, entries are only required for those addresses for which the system would receive frames were it not operating in promiscuous mode.
OBJECT-TYPE    
  SEQUENCE OF  
    IfExtnsRcvAddrEntry

ifExtnsRcvAddrEntry 1.3.6.1.2.1.12.3.1
A list of objects identifying an address for which the system will accept packets/ frames on a particular interface.
OBJECT-TYPE    
  IfExtnsRcvAddrEntry  

ifExtnsRcvAddrIfIndex 1.3.6.1.2.1.12.3.1.1
The value of ifIndex, defined in [4,6], of an interface which recognizes this entry's address.
OBJECT-TYPE    
  INTEGER  

ifExtnsRcvAddress 1.3.6.1.2.1.12.3.1.2
An address for which the system will accept packets/frames on this entry's interface.
OBJECT-TYPE    
  OCTET STRING  

ifExtnsRcvAddrStatus 1.3.6.1.2.1.12.3.1.3
This object has the value nonVolatile(4) for those entries in the table which are valid and will not be deleted by the next restart of the managed system. Entries having the value volatile(3) are valid and exist, but have not been saved, so that will not exist after the next restart of the managed system. Entries having the value other(1) are valid and exist but are not classified as to whether they will continue to exist after the next restart. Entries having the value invalid(2) are invalid and do not represent an address for which an interface accepts frames. Setting an object instance to one of the values other(1), volatile(3), or nonVolatile(4) causes the corresponding entry to exist or continue to exist, and to take on the respective status as regards the next restart of the managed system. Setting an object instance to the value invalid(2) causes the corresponding entry to become invalid or cease to exist. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ifExtnsRcvAddrStatus object instance.
OBJECT-TYPE    
  INTEGER other(1), invalid(2), volatile(3), nonVolatile(4)  

dot3Table 1.3.6.1.2.1.10.7.1
Status information and control variables for a collection of ethernet-like interfaces attached to a particular system.
OBJECT-TYPE    
  SEQUENCE OF  
    Dot3Entry

dot3Entry 1.3.6.1.2.1.10.7.1.1
Status information and control variables for a particular interface to an ethernet-like medium.
OBJECT-TYPE    
  Dot3Entry  

dot3Index 1.3.6.1.2.1.10.7.1.1.1
An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

dot3InitializeMac 1.3.6.1.2.1.10.7.1.1.2
The initialization status of the MAC and PLS (Physical Layer Signalling) subsystems for a particular interface. The value initialized(1) signifies that the subsystems for a particular interface have been previously initialized; the value uninitialized(2) signifies that they have not been previously initialized. Each alteration of an instance of this object to either of the values initialized(1) or uninitialized(2) is analogous to an invocation of the initializeMAC action defined in [9] and has the effect of (re-)initializing the MAC and PLS subsystems for the associated interface. In particular, all management counters pertaining to the MAC and PLS subsystems for said interface are reset to zero; the receive and transmit layer management state variables (receiveEnabled and transmitEnabled in [9]) are set to enable reception and transmission of frames; the promiscuous receive function is disabled; and multicast reception is disabled.
OBJECT-TYPE    
  INTEGER initialized(1), uninitialized(2)  

dot3MacSubLayerStatus 1.3.6.1.2.1.10.7.1.1.3
The operational status of the MAC sublayer for a particular interface. The value enabled(1) signifies that the MAC sublayer for said interface is operational for both transmitting and receiving frames -- that is, that the value of both the receive and transmit layer management state variables (receiveEnabled and transmitEnabled in [9]) for said interface are true. The value disabled(2) signifies that the MAC sublayer for said interface is not operational for either transmitting or receiving frames. In particular, the value of an instance of this object is disabled(2) whenever the value of the corresponding instance of the dot3Enabled object is false(2). Each alteration of an instance of this object to the value enabled(1) is analogous to an invocation of the enableMACSublayer action defined in [9] and has the effect of starting normal transmit and receive operations (from the ``idle'' state) on the associated interface. In particular, such an alteration has the effect of resetting the PLS for said interface and of setting the receive and transmit layer management state variables (receiveEnabled and transmitEnabled in [9]) to be true. Each alteration of an instance of this object to the value disabled(2) is analogous to an invocation of the disableMACSublayer action defined in [9] and has the effect of terminating transmit and receive operations on the associated interface. In particular, such an alteration has the effect of setting the receive and transmit layer management state variables (receiveEnabled and transmitEnabled in [9]) to be false. Any transmissions/receptions in progress are completed before operation is terminated.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot3MulticastReceiveStatus 1.3.6.1.2.1.10.7.1.1.4
The multicast receive status for a particular interface. The value enabled(1) signifies that reception of multicast frames by the MAC sublayer is enabled on said interface. The value disabled(2) signifies that reception of multicast frames by the MAC sublayer is not enabled on said interface. Each alteration of an instance of this object to the value enabled(1) is analogous to an invocation of the enableMulticastReceive action defined in [9] and has the effect of enabling multicast frame reception on the associated interface. Actual reception of multicast frames is only possible on an interface when the values for the associated instances of the dot3MulticastReceiveStatus and dot3MacSubLayerStatus objects are enabled(1) and enabled(1), respectively. Each alteration of an instance of this object to the value disabled(2) is analogous to an invocation of the disableMulticastReceive action defined in [9] and has the effect of inhibiting multicast frame reception on the associated interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot3TxEnabled 1.3.6.1.2.1.10.7.1.1.5
The transmit layer management state variable (transmitEnabled as defined in [9]) for a particular interface. The value true(1) signifies that the MAC frame transmission is enabled on said interface. The value false(2) signifies that the MAC frame transmission is inhibited on said interface. In particular, the value of an instance of this object is false(2) whenever the value of the corresponding instance of the dot3MacSubLayerStatus object is disabled(2). Each alteration of an instance of this object to the value true(1) is analogous to an invocation of the enableTransmit action defined in [9] and has the effect of enabling MAC sublayer frame transmission on the associated interface. In particular, such an alteration has the effect of setting the transmit layer management state variable (transmitEnabled in [9]) for said interface to be true. Each alteration of an instance of this object to the value false(2) is analogous to an invocation of the disableTransmit action defined in [9] and has the effect of inhibiting MAC sublayer frame transmission on the associated interface. In particular, such an alteration has the effect of setting the transmit layer management state variable (transmitEnabled in [9]) for said interface to be false. Any transmissions in progress are completed before transmission is inhibited.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

dot3TestTdrValue 1.3.6.1.2.1.10.7.1.1.6
The number of 10 MHz ticks which elapsed between the beginning of a TDR measurement and the collision which ended it, for the most recently executed TDR test. If no TDR test has been executed, or the last TDR value is not available, this object has the value 0.
OBJECT-TYPE    
  Gauge  

dot3StatsTable 1.3.6.1.2.1.10.7.2
Statistics for a collection of ethernet-like interfaces attached to a particular system.
OBJECT-TYPE    
  SEQUENCE OF  
    Dot3StatsEntry

dot3StatsEntry 1.3.6.1.2.1.10.7.2.1
Statistics for a particular interface to an ethernet-like medium.
OBJECT-TYPE    
  Dot3StatsEntry  

dot3StatsIndex 1.3.6.1.2.1.10.7.2.1.1
An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

dot3StatsAlignmentErrors 1.3.6.1.2.1.10.7.2.1.2
A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of [9], counted exclusively according to the error status presented to the LLC.
OBJECT-TYPE    
  Counter  

dot3StatsFCSErrors 1.3.6.1.2.1.10.7.2.1.3
A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of [9], counted exclusively according to the error status presented to the LLC.
OBJECT-TYPE    
  Counter  

dot3StatsSingleCollisionFrames 1.3.6.1.2.1.10.7.2.1.4
A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts or ifOutNUcastPkts object and is not counted by the corresponding instance of the dot3StatsMultipleCollisionFrames object.
OBJECT-TYPE    
  Counter  

dot3StatsMultipleCollisionFrames 1.3.6.1.2.1.10.7.2.1.5
A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts or ifOutNUcastPkts object and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object.
OBJECT-TYPE    
  Counter  

dot3StatsSQETestErrors 1.3.6.1.2.1.10.7.2.1.6
A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of [12] and its generation is described in section 7.2.4.6 of the same document.
OBJECT-TYPE    
  Counter  

dot3StatsDeferredTransmissions 1.3.6.1.2.1.10.7.2.1.7
A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions.
OBJECT-TYPE    
  Counter  

dot3StatsLateCollisions 1.3.6.1.2.1.10.7.2.1.8
The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 Mbit/s system. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics.
OBJECT-TYPE    
  Counter  

dot3StatsExcessiveCollisions 1.3.6.1.2.1.10.7.2.1.9
A count of frames for which transmission on a particular interface fails due to excessive collisions.
OBJECT-TYPE    
  Counter  

dot3StatsInternalMacTransmitErrors 1.3.6.1.2.1.10.7.2.1.10
A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsLateCollisions object, the dot3StatsExcessiveCollisions object, the dot3StatsCarrierSenseErrors object, or the dot3StatsExcessiveDeferrals object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of transmission errors on a particular interface that are not otherwise counted.
OBJECT-TYPE    
  Counter  

dot3StatsCarrierSenseErrors 1.3.6.1.2.1.10.7.2.1.11
The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count represented by an instance of this object is incremented at most once per transmission attempt, even if the carrier sense condition fluctuates during a transmission attempt.
OBJECT-TYPE    
  Counter  

dot3StatsExcessiveDeferrals 1.3.6.1.2.1.10.7.2.1.12
A count of frames for which transmission on a particular interface is deferred for an excessive period of time.
OBJECT-TYPE    
  Counter  

dot3StatsFrameTooLongs 1.3.6.1.2.1.10.7.2.1.13
A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of [9], counted exclusively according to the error status presented to the LLC.
OBJECT-TYPE    
  Counter  

dot3StatsInRangeLengthErrors 1.3.6.1.2.1.10.7.2.1.14
A count of frames received on a particular interface with a length field value that falls between the minimum unpadded LLC data size and the maximum allowed LLC data size inclusive and that does not match the number of LLC data octets received. The count represented by an instance of this object also includes frames for which the length field value is less than the minimum unpadded LLC data size.
OBJECT-TYPE    
  Counter  

dot3StatsOutOfRangeLengthFields 1.3.6.1.2.1.10.7.2.1.15
A count of frames received on a particular interface for which the length field value exceeds the maximum allowed LLC data size. The count represented by an instance of this object is not incremented in implementations that observe Ethernet encapsulation conventions (by which the IEEE 802.3 length field is interpreted as the Ethernet Type field).
OBJECT-TYPE    
  Counter  

dot3StatsInternalMacReceiveErrors 1.3.6.1.2.1.10.7.2.1.16
A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsFrameTooLongs object, the dot3StatsAlignmentErrors object, the dot3StatsFCSErrors object, the dot3StatsInRangeLengthErrors object, or the dot3StatsOutOfRangeLengthFields object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted.
OBJECT-TYPE    
  Counter  

blcAgentIpAddr 1.3.6.1.4.1.43.12.1.1
The network management module's administrative IpAddress. The current operational IpAddress can be obtained from the ipAdEntAddr entry in the ipAddrTable.
OBJECT-TYPE    
  IpAddress  

blcAgentIpNetmask 1.3.6.1.4.1.43.12.1.2
The network management module's administrative subnet mask. The current operational subnet mask can be obtained from the ipAdEntNetMask entry in the ipAddrTable.
OBJECT-TYPE    
  IpAddress  

blcAgentIpBroadAddr 1.3.6.1.4.1.43.12.1.3
The network management module's adminstrative default broadcast address
OBJECT-TYPE    
  IpAddress  

blcAgentDefaultGateway 1.3.6.1.4.1.43.12.1.4
The network management module's administrative default gateway IpAddress. The current operational default gateway's IpAddress can be obtained from the ipRoutingTable.
OBJECT-TYPE    
  IpAddress  

blcAgentMACAddress 1.3.6.1.4.1.43.12.1.5
The MAC address of the BLC Agent.
OBJECT-TYPE    
  OCTET STRING  

blcAgentAuthenticationStatus 1.3.6.1.4.1.43.12.1.6
Indicates whether management frames are checked against entries in the management tranmiter table.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

blcAgentResetDevice 1.3.6.1.4.1.43.12.1.7
Network management module reset status. Writing a 2 to this object will reset the management agent.
OBJECT-TYPE    
  INTEGER notreset(1), reset(2)  

blcAgentDefaultConfig 1.3.6.1.4.1.43.12.1.8
The device is returned to its factory settings.
OBJECT-TYPE    
  INTEGER normal(1), reverting(2)  

blcAgentManagementTable 1.3.6.1.4.1.43.12.1.9
This entity's management address table. (10 entries)
OBJECT-TYPE    
  SEQUENCE OF  
    BLCAgentManagementEntry

blcAgentManagementEntry 1.3.6.1.4.1.43.12.1.9.1
A source address address and privileges of a particular management station.
OBJECT-TYPE    
  BLCAgentManagementEntry  

blcAgentManagementAddr 1.3.6.1.4.1.43.12.1.9.1.1
IpAddress of the manager.
OBJECT-TYPE    
  IpAddress  

blcAgentManagementAccess 1.3.6.1.4.1.43.12.1.9.1.2
Setting this object to the value invalid(2) invalidates the corresponding entry in the ECSAgentTrapReceiverTable. That is, it effectively disassociates the address identified with the entry by removing the entry from the table.
OBJECT-TYPE    
  INTEGER invalid(1), off(2), superread(3), superreadwrite(4), readonly(5), readwrite(6)  

blcAgentTrapReceiverTable 1.3.6.1.4.1.43.12.1.10
This entity's Trap Receiver Table. (10 entries)
OBJECT-TYPE    
  SEQUENCE OF  
    BLCAgentTrapReceiverEntry

blcAgentTrapReceiverEntry 1.3.6.1.4.1.43.12.1.10.1
A destination address and community string for a particular trap receiver.
OBJECT-TYPE    
  BLCAgentTrapReceiverEntry  

blcAgentTrapReceiverAddr 1.3.6.1.4.1.43.12.1.10.1.1
IpAddress for trap receiver.
OBJECT-TYPE    
  IpAddress  

blcAgentTrapType 1.3.6.1.4.1.43.12.1.10.1.2
Setting this object to the value invalid(2) invalidates the corresponding entry in the blcAgentTrapReceiverTable. That is, it effectively disassociates the address identified with the entry by removing the entry from the table.
OBJECT-TYPE    
  INTEGER invalid(1), off-on(2), generic(3), dot1d(4), databasefull(5), cug-violation(6)  

blcAgentTrapReceiverComm 1.3.6.1.4.1.43.12.1.10.1.3
Community string used for traps.
OBJECT-TYPE    
  DisplayString Size(0..20)  

blcAgentTrapLevel 1.3.6.1.4.1.43.12.1.10.1.4
Indicates the type of traps that will be sent to this address.
OBJECT-TYPE    
  INTEGER  

blcForwardingMode 1.3.6.1.4.1.43.12.2.1
Determines the forwarding mode of the bridge. If set to filtering then the bridge is filtering and forwarding packets by destination address, if transparent then the bridge is forwarding all packets and if set to isolated the bridge is forwarding no packets.
OBJECT-TYPE    
  INTEGER filtering(1), transparent(2), isolated(3)  

blcSTAPMode 1.3.6.1.4.1.43.12.2.2
Determines whether the STAP algorithm is on or off.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

blcAccessGroupCheckingMode 1.3.6.1.4.1.43.12.2.3
Determines whether access group checking is on or off.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

blcLearnMode 1.3.6.1.4.1.43.12.2.4
Determines whether the bridge is not learning addresses (off), learning into free access group or the null access group.
OBJECT-TYPE    
  INTEGER off(1), learn-into-no-accessgroup(2), learn-into-free-accessgroup(3)  

blcProtocolFilterMode 1.3.6.1.4.1.43.12.2.5
A flag to specify whether the bridge relay will soft filter frames passing through it.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

blcAgingMode 1.3.6.1.4.1.43.12.2.6
Determines whether the addresses held in the filtering database are aged (on) or not-aged (off).
OBJECT-TYPE    
  INTEGER off(1), on(2)  

blcBroadcastForward 1.3.6.1.4.1.43.12.2.7
Determines whether the bridge will forward packets with the broadcast address.
OBJECT-TYPE    
  INTEGER filter(1), forward(2)  

blcDuplicateAddressCheckingMode 1.3.6.1.4.1.43.12.2.8
Determines whether the bridge will forward packets with the same source and destination address.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

blcReportAccessGroupViolationMode 1.3.6.1.4.1.43.12.2.9
Determines whether Access Group Violations are reported or not.
OBJECT-TYPE    
  INTEGER no-reports(1), reports(2)  

blcSizeOfTransparentDataBase 1.3.6.1.4.1.43.12.3.1
The maximum possible number of the Transparent database entries.
OBJECT-TYPE    
  INTEGER  

blcNumberOfStaticEntries 1.3.6.1.4.1.43.12.3.2
The number of entries currently in the transparent database that cannot be aged out, and are not in the permanent database.
OBJECT-TYPE    
  INTEGER  

blcNumberOfDynamicEntries 1.3.6.1.4.1.43.12.3.3
The number of entries currently in the transparent database that can be aged out, and not held in the permanent database.
OBJECT-TYPE    
  INTEGER  

blcClearTransparentDataBase 1.3.6.1.4.1.43.12.3.4
An attribute to clear all entries in the transparent database except for those which are permanent.
OBJECT-TYPE    
  INTEGER normal(1), clear(2)  

blcMaxNumberOfPermanentEntries 1.3.6.1.4.1.43.12.3.5
The maximum number of entries in the filtering database that can be permanent.
OBJECT-TYPE    
  INTEGER  

blcNumberOfPermanentEntries 1.3.6.1.4.1.43.12.3.6
The number of permanent entries in the filtering database.
OBJECT-TYPE    
  INTEGER  

blcClearPermanentEntries 1.3.6.1.4.1.43.12.3.7
An attribute to clear the permanent entries from the filtering database.
OBJECT-TYPE    
  INTEGER normal(1), clear(2)  

blcSaveLearntAddresses 1.3.6.1.4.1.43.12.3.8
An attribute to make the leanrt addresses held in the transparent database to become permanent entries.
OBJECT-TYPE    
  INTEGER normal(1), save(2)  

blcNumberOfProtocolFilters 1.3.6.1.4.1.43.12.4.1
The maximum number of protocol filters that can be used.
OBJECT-TYPE    
  INTEGER  

blcProtocolFilterOperation 1.3.6.1.4.1.43.12.4.2
An attribute to determine whether the resultant filter is a composite OR or AND operation of the individual protocol filters.
OBJECT-TYPE    
  INTEGER and(1), or(2)  

blcProtocolFilterTable 1.3.6.1.4.1.43.12.4.3
A list of protocol filter entries. The maximum number of entries is given by blcNumberOfProtocolFilters.
OBJECT-TYPE    
  SEQUENCE OF  
    BlcProtocolFilterEntry

blcProtocolFilterEntry 1.3.6.1.4.1.43.12.4.3.1
A protocol filter entry.
OBJECT-TYPE    
  BlcProtocolFilterEntry  

blcProtocolIndex 1.3.6.1.4.1.43.12.4.3.1.1
A unique value for each protocol filter. Its value ranges from 1 to blcNumberOfProtocolFilters.
OBJECT-TYPE    
  INTEGER  

blcProtocolValid 1.3.6.1.4.1.43.12.4.3.1.2
The object is valid for valid protocol filter entries. The object is removed from the table by setting the value to invalid.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

blcProtocolState 1.3.6.1.4.1.43.12.4.3.1.3
The object is on if the protocol filter is being used for filtering frames. The filter is not used, but remains in the table if the value is set to off.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

blcProtocolIdentifier 1.3.6.1.4.1.43.12.4.3.1.4
A string used to identify this protocol filter.
OBJECT-TYPE    
  DisplayString Size(0..16)  

blcProtocolOffset 1.3.6.1.4.1.43.12.4.3.1.5
Offset within the frame of the 4-byte field on which filtering is to be performed.
OBJECT-TYPE    
  INTEGER  

blcProtocolMask 1.3.6.1.4.1.43.12.4.3.1.6
This object is ANDed with the 4-byte field in the frame. The result is compared with blcProtocolMatch.
OBJECT-TYPE    
  OCTET STRING  

blcProtocolMatch 1.3.6.1.4.1.43.12.4.3.1.7
This object is compared with the reault of the ANDing. with blcProtocolMask.
OBJECT-TYPE    
  OCTET STRING  

blcProtocolDecision 1.3.6.1.4.1.43.12.4.3.1.8
Determines whether the comparison of blcProtocolMatch and the masked data field will cause the action specified in blcProtocolAction to be taken on a match, or not.
OBJECT-TYPE    
  INTEGER nomatch(1), match(2)  

blcProtocolAction 1.3.6.1.4.1.43.12.4.3.1.9
As a result of the descision made in blcProtocolDecision the frame will be either filterd or forwarded, depending on the setting of this object.
OBJECT-TYPE    
  INTEGER filter(1), forward(2)  

blcProtocolFilterDefaultAction 1.3.6.1.4.1.43.12.4.4
The action to be taken if the filters specified in the protocol filter table are not satisfied.
OBJECT-TYPE    
  INTEGER filter(1), forward(2)  

accessGroupDBMaxEntries 1.3.6.1.4.1.43.12.5.1
The maximum number of entries in the access group table.
OBJECT-TYPE    
  INTEGER  

accessGroupDBValidEntries 1.3.6.1.4.1.43.12.5.2
The current number of user group entries in the access group table.
OBJECT-TYPE    
  INTEGER  

accessGroupDBShortTable 1.3.6.1.4.1.43.12.5.3
A list of Access Group entries.
OBJECT-TYPE    
  SEQUENCE OF  
    AccessGroupMemberShortTableEntry

accessGroupMemberShortTableEntry 1.3.6.1.4.1.43.12.5.3.1
Tok_String
OBJECT-TYPE    
  AccessGroupMemberShortTableEntry  

agsMemberAddress 1.3.6.1.4.1.43.12.5.3.1.1
The MAC address of this entry.
OBJECT-TYPE    
  OCTET STRING  

agsMemberValid 1.3.6.1.4.1.43.12.5.3.1.2
This object specifies whether the MAC address is a member of the access groups database (valid). To remove the MAC address from the access group database set the value to invalid for this entry.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

agsMembers 1.3.6.1.4.1.43.12.5.3.1.3
This corresponds to a bit map of the access group membership for the associated address. This includes normal Closed User Groups (CUGs) the Free Access Group and the Management Group. Access groups 1-8 are described by the first OCTET and 9-16 by the second OCTET, as more access groups become available in future products, more OCTETS will become available.
OBJECT-TYPE    
  OCTET STRING  

accessGroupDBFullTable 1.3.6.1.4.1.43.12.5.4
A list of Access Group entries.
OBJECT-TYPE    
  SEQUENCE OF  
    AccessGroupMemberFullTableEntry

accessGroupMemberFullTableEntry 1.3.6.1.4.1.43.12.5.4.1
Tok_String
OBJECT-TYPE    
  AccessGroupMemberFullTableEntry  

agfMemberAddress 1.3.6.1.4.1.43.12.5.4.1.1
The MAC address of this entry.
OBJECT-TYPE    
  OCTET STRING  

agfMemberValid 1.3.6.1.4.1.43.12.5.4.1.2
This object specifies whether the MAC address can be a memember of access groups (enabled) or not. To remove the MAC address from the access groups database set the value to invalid for this entry.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

agfMemberFreeUserGroup 1.3.6.1.4.1.43.12.5.4.1.3
This object specifies whether the MAC address is a member of the free access group (free) or the closed access group.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

agfMemberUserGroup1 1.3.6.1.4.1.43.12.5.4.1.4
This object specifies whether the MAC address is a memember of access user group 1 (yes) or not (no). To remove the MAC address from this access group set the value to no for this entry.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

agfMemberUserGroup2 1.3.6.1.4.1.43.12.5.4.1.5
This object specifies whether the MAC address is a memember of access user group 2 (yes) or not (no). To remove the MAC address from this access group set the value to no for this entry.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

agfMemberUserGroup3 1.3.6.1.4.1.43.12.5.4.1.6
This object specifies whether the MAC address is a memember of access user group 3 (yes) or not (no). To remove the MAC address from this access group set the value to no for this entry.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

agfMemberUserGroup4 1.3.6.1.4.1.43.12.5.4.1.7
This object specifies whether the MAC address is a memember of access user group 4 (yes) or not (no). To remove the MAC address from this access group set the value to no for this entry.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

agfMemberUserGroup5 1.3.6.1.4.1.43.12.5.4.1.8
This object specifies whether the MAC address is a memember of access user group 5 (yes) or not (no). To remove the MAC address from this access group set the value to no for this entry.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

agfMemberUserGroup6 1.3.6.1.4.1.43.12.5.4.1.9
This object specifies whether the MAC address is a memember of access user group 6 (yes) or not (no). To remove the MAC address from this access group set the value to no for this entry.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

agfMemberUserGroup7 1.3.6.1.4.1.43.12.5.4.1.10
This object specifies whether the MAC address is a memember of access user group 7 (yes) or not (no). To remove the MAC address from this access group set the value to no for this entry.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

agfMemberUserGroup8 1.3.6.1.4.1.43.12.5.4.1.11
This object specifies whether the MAC address is a memember of access user group 8 (yes) or not (no). To remove the MAC address from this access group set the value to no for this entry.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

accessUserGroupCount 1.3.6.1.4.1.43.12.5.5
The maximum number of User Access Groups supported by the system.
OBJECT-TYPE    
  INTEGER  

accessUserGroupNameTable 1.3.6.1.4.1.43.12.5.6
A list of names for each access group.
OBJECT-TYPE    
  SEQUENCE OF  
    AccessUserGroupNameTableEntry

accessUserGroupNameTableEntry 1.3.6.1.4.1.43.12.5.6.1
Tok_String
OBJECT-TYPE    
  AccessUserGroupNameTableEntry  

accessUserGroupNameIndex 1.3.6.1.4.1.43.12.5.6.1.1
A unique value for each Access Group. Its value ranges between 1 and the value of the accessGroupEntries.
OBJECT-TYPE    
  INTEGER  

accessUserGroupNameIdentifier 1.3.6.1.4.1.43.12.5.6.1.2
The name associated with this access group.
OBJECT-TYPE    
  DisplayString Size(0..32)  

accessGroupViolationTable 1.3.6.1.4.1.43.12.5.7
The number of access group violations on a per port basis.
OBJECT-TYPE    
  SEQUENCE OF  
    AccessGroupViolationTableEntry

accessGroupViolationTableEntry 1.3.6.1.4.1.43.12.5.7.1
Tok_String
OBJECT-TYPE    
  AccessGroupViolationTableEntry  

agViolationPort 1.3.6.1.4.1.43.12.5.7.1.1
The port for which cug violations have been detected.
OBJECT-TYPE    
  INTEGER  

agViolations 1.3.6.1.4.1.43.12.5.7.1.2
The number of CUG violations that have been attempted on the port indicated by agViolationPort
OBJECT-TYPE    
  Counter  

newRoot 1
The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer immediately subsequent to its election.
TRAP-TYPE    

topologyChange 2
A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition.
TRAP-TYPE    

filteringDataBaseFull 1
The filtering database within the bridge has become overloaded or full.
TRAP-TYPE    

permanentDataBaseFull 2
The maximum number of permanent entries in the filtering database has been exceeded.
TRAP-TYPE    

accessGroupViolation 3
A recent attempt has been made to violate the access groups in the bridge.
TRAP-TYPE