LB3GH-1-0-7

File: LB3GH-1-0-7.mib (104112 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

enterprises Counter NetworkAddress
DisplayString OBJECT-TYPE TRAP-TYPE

Defined Types

SlotEntry  
SEQUENCE    
  slotIndex INTEGER
  slotBoardType INTEGER
  slotBoardRevision STRING
  slotBoardStatus INTEGER
  slotBoardName DisplayString
  slotBoardNameAbbrev DisplayString
  slotBoardAction INTEGER

SMMEntry  
SEQUENCE    
  smmSlotIndex INTEGER
  smmEthernetPortCount INTEGER
  smmBaseEthernetPortIndex INTEGER

FBCMEntry  
SEQUENCE    
  fbcmSlotIndex INTEGER
  fbcmMACCount INTEGER
  fbcmBaseMACIndex INTEGER
  fbcmPortCount INTEGER
  fbcmBasePortIndex INTEGER

FCMEntry  
SEQUENCE    
  fcmSlotIndex INTEGER
  fcmPortCount INTEGER
  fcmBasePortIndex INTEGER

PortEntry  
SEQUENCE    
  portSlotIndex INTEGER
  portIndex INTEGER
  portLabel DisplayString

ELMEntry  
SEQUENCE    
  elmSlotIndex INTEGER
  elmFddiMACCount INTEGER
  elmBaseFddiMACIndex INTEGER
  elmEthernetPortCount INTEGER
  elmBaseEthernetPortIndex INTEGER
  elmAddressThreshold INTEGER

ELMFddiMACEntry  
SEQUENCE    
  elmFddiSlotIndex INTEGER
  elmFddiMACIndex INTEGER
  elmFddiMACForwardedCts Counter
  elmFddiMACDroppedCts Counter

ELMEthernetPortEntry  
SEQUENCE    
  elmEthernetPortSlotIndex INTEGER
  elmEthernetPortIndex INTEGER
  elmEthernetPortLabel DisplayString
  elmEthernetPortForwardedCts Counter
  elmEthernetPortDroppedCts Counter
  elmEthernetPortUTurnCts Counter
  elmEthernetPortState INTEGER
  elmEthernetPortAction INTEGER

ELMEthernetMACAddressEntry  
SEQUENCE    
  elmEthernetMACAddressSlotIndex INTEGER
  elmEthernetMACAddressPortIndex INTEGER
  elmEthernetMACAddressIndex INTEGER
  elmEthernetMACAddressType INTEGER
  elmEthernetMACAddressRemoteAddress STRING
  elmEthernetMACAddressIsStatic INTEGER
  elmEthernetMACAddressStaticPort INTEGER
  elmEthernetMACAddressAge INTEGER

LbSlotEntry  
SEQUENCE    
  lbSlotIndex INTEGER
  lbSlotBoardType INTEGER
  lbSlotBoardRevision STRING
  lbSlotBoardStatus INTEGER
  lbSlotBoardName DisplayString
  lbSlotBoardNameAbbrev DisplayString
  lbSlotFddiMacCount INTEGER
  lbSlotFddiMacBaseIndex INTEGER
  lbSlotFddiPortCount INTEGER
  lbSlotFddiPortBaseIndex INTEGER
  lbSlotEthernetPortCount INTEGER
  lbSlotEthernetPortBaseIndex INTEGER
  lbSlotExpressFunctionCount INTEGER
  lbSlotExpressFunctionBaseIndex INTEGER
  lbSlotExpressFddiPortCount INTEGER
  lbSlotExpressFddiPortBaseIndex INTEGER
  lbSlotExpressEthernetPortCount INTEGER
  lbSlotExpressEthernetPortBaseIndex INTEGER
  lbSlotBoardAction INTEGER
  lbSlotBridgeFunctionCount INTEGER
  lbSlotBridgeFunctionBaseIndex INTEGER

LbFddiMacEntry  
SEQUENCE    
  lbFddiMacIndex INTEGER
  lbFddiMacSlotIndex INTEGER
  lbFddiMacLocalIndex INTEGER
  lbFddiMacByteReceiveRate INTEGER
  lbFddiMacPeakByteReceiveRate INTEGER
  lbFddiMacFrameReceiveRate INTEGER
  lbFddiMacPeakFrameReceiveRate INTEGER
  lbFddiMacByteTransmitRate INTEGER
  lbFddiMacPeakByteTransmitRate INTEGER
  lbFddiMacFrameTransmitRate INTEGER
  lbFddiMacPeakFrameTransmitRate INTEGER
  lbFddiMacReceiveMulticastThreshold INTEGER
  lbFddiMacBeaconHistory STRING

LbEthernetPortEntry  
SEQUENCE    
  lbEthernetPortIndex INTEGER
  lbEthernetPortSlotIndex INTEGER
  lbEthernetPortLocalIndex INTEGER
  lbEthernetPortLabel DisplayString
  lbEthernetPortChipsetType INTEGER
  lbEthernetPortLinkStatus INTEGER
  lbEthernetPortByteReceiveRate INTEGER
  lbEthernetPortPeakByteReceiveRate INTEGER
  lbEthernetPortFrameReceiveRate INTEGER
  lbEthernetPortPeakFrameReceiveRate INTEGER
  lbEthernetPortByteTransmitRate INTEGER
  lbEthernetPortPeakByteTransmitRate INTEGER
  lbEthernetPortFrameTransmitRate INTEGER
  lbEthernetPortPeakFrameTransmitRate INTEGER
  lbEthernetPortReceiveMulticastThreshold INTEGER
  lbEthernetPortType INTEGER

LbFddiPortEntry  
SEQUENCE    
  lbFddiPortIndex INTEGER
  lbFddiPortSlotIndex INTEGER
  lbFddiPortLocalIndex INTEGER
  lbFddiPortLabel DisplayString

LbExpressEntry  
SEQUENCE    
  lbExpressIndex INTEGER
  lbExpressSlotIndex INTEGER
  lbExpressLocalIndex INTEGER
  lbExpressAddressThreshold INTEGER

LbExpressFddiPortEntry  
SEQUENCE    
  lbExpressFddiPortIndex INTEGER
  lbExpressFddiPortSlotIndex INTEGER
  lbExpressFddiPortLocalIndex INTEGER
  lbExpressFddiPortForwardedCts Counter
  lbExpressFddiPortDroppedCts Counter

LbExpressEthernetPortEntry  
SEQUENCE    
  lbExpressEthernetPortIndex INTEGER
  lbExpressEthernetPortSlotIndex INTEGER
  lbExpressEthernetPortLocalIndex INTEGER
  lbExpressEthernetPortForwardedCts Counter
  lbExpressEthernetPortDroppedCts Counter
  lbExpressEthernetPortUTurnCts Counter
  lbExpressEthernetPortAction INTEGER

LbExpressEthernetPortAddressEntry  
SEQUENCE    
  lbExpressEthernetPortAddressPortIndex INTEGER
  lbExpressEthernetPortAddressIndex INTEGER
  lbExpressEthernetPortAddressSlotIndex INTEGER
  lbExpressEthernetPortAddressType INTEGER
  lbExpressEthernetPortAddressRemoteAddress STRING
  lbExpressEthernetPortAddressIsStatic INTEGER
  lbExpressEthernetPortAddressStaticPort INTEGER
  lbExpressEthernetPortAddressAge INTEGER

LbPowerSupplyEntry  
SEQUENCE    
  lbPowerSupplyIndex INTEGER
  lbPowerSupplyLocation INTEGER
  lbPowerSupplyStatus INTEGER
  lbPowerSupplyFailureType INTEGER
  lbPowerSupplyLastFailure INTEGER

LbBridgeEntry  
SEQUENCE    
  lbBridgeIndex INTEGER
  lbBridgeBaseSlotIndex INTEGER
  lbBridgePortCount INTEGER
  lbBridgeAddressTableSize INTEGER
  lbBridgeAddressThreshold INTEGER
  lbBridgeMode INTEGER
  lbBridgeLocalIndex INTEGER

LbBridgePortEntry  
SEQUENCE    
  lbBridgePortBridgeIndex INTEGER
  lbBridgePortIndex INTEGER
  lbBridgePortSlotIndex INTEGER
  lbBridgePortLocalIndex INTEGER
  lbBridgePortType INTEGER
  lbBridgePortIpFragmentationEnabled INTEGER
  lbBridgePortReceiveMulticastLimit INTEGER
  lbBridgePortAddressAction INTEGER
  lbBridgePortTotalForwardedCts Counter
  lbBridgePortManagementFramesReceived Counter
  lbBridgePortTotalDiscards Counter
  lbBridgePortReceiveBlockedDiscards Counter
  lbBridgePortReceiveMulticastLimitExceededs Counter
  lbBridgePortReceiveSecurityDiscards Counter
  lbBridgePortReceiveUnknownDiscards Counter
  lbBridgePortReceiveOtherDiscards Counter
  lbBridgePortReceiveErrorDiscards Counter
  lbBridgePortSameSegmentDiscards Counter
  lbBridgePortTransmitBlockedDiscards Counter
  lbBridgePortTotalFiltered Counter
  lbBridgePortReceiveUnicastFiltered Counter
  lbBridgePortReceiveMulticastFiltered Counter
  lbBridgePortTransmitUnicastFiltered Counter
  lbBridgePortTransmitMulticastFiltered Counter
  lbBridgePortReceiveMulticastLimitExceededCount Counter

LbBridgePortForwardedToEntry  
SEQUENCE    
  lbBridgePortForwardedToBridgeIndex INTEGER
  lbBridgePortForwardedToReceivePortIndex INTEGER
  lbBridgePortForwardedToDstPortIndex INTEGER
  lbBridgePortForwardedToCount Counter

LbBridgePortFilteredToEntry  
SEQUENCE    
  lbBridgePortFilteredToBridgeIndex INTEGER
  lbBridgePortFilteredToReceivePortIndex INTEGER
  lbBridgePortFilteredToDstPortIndex INTEGER
  lbBridgePortFilteredToCount Counter

LbBridgePortAddressEntry  
SEQUENCE    
  lbBridgePortAddressBridgeIndex INTEGER
  lbBridgePortAddressPortIndex INTEGER
  lbBridgePortAddressIndex INTEGER
  lbBridgePortAddressRemoteAddress STRING
  lbBridgePortAddressType INTEGER
  lbBridgePortAddressIsStatic INTEGER
  lbBridgePortAddressStaticPort INTEGER
  lbBridgePortAddressAge INTEGER

LbTrapEnterpriseTableEntry  
SEQUENCE    
  lbTrapEnterpriseIndex INTEGER
  lbTrapEnterpriseOID OBJECT IDENTIFIER

LbTrapDestTableEntry  
SEQUENCE    
  lbTrapDestAddr NetworkAddress
  lbTrapDestEnterpriseIndex INTEGER
  lbTrapNumber INTEGER
  lbTrapEntryStatus INTEGER

Defined Values

a3Com 1.3.6.1.4.1.43
OBJECT IDENTIFIER    

lb3gh 1.3.6.1.4.1.43.7
OBJECT IDENTIFIER    

lb3ghMib 1.3.6.1.4.1.43.7.1
OBJECT IDENTIFIER    

chassis 1.3.6.1.4.1.43.7.1.1
OBJECT IDENTIFIER    

slot 1.3.6.1.4.1.43.7.1.2
OBJECT IDENTIFIER    

smm 1.3.6.1.4.1.43.7.1.3
OBJECT IDENTIFIER    

fbcm 1.3.6.1.4.1.43.7.1.4
OBJECT IDENTIFIER    

fcm 1.3.6.1.4.1.43.7.1.5
OBJECT IDENTIFIER    

port 1.3.6.1.4.1.43.7.1.6
OBJECT IDENTIFIER    

elm 1.3.6.1.4.1.43.7.1.7
OBJECT IDENTIFIER    

elmFddiMAC 1.3.6.1.4.1.43.7.1.8
OBJECT IDENTIFIER    

elmEthernetPort 1.3.6.1.4.1.43.7.1.9
OBJECT IDENTIFIER    

elmMACAddress 1.3.6.1.4.1.43.7.1.10
OBJECT IDENTIFIER    

lbSystem 1.3.6.1.4.1.43.7.1.11
OBJECT IDENTIFIER    

lbSlot 1.3.6.1.4.1.43.7.1.12
OBJECT IDENTIFIER    

lbFddiMac 1.3.6.1.4.1.43.7.1.13
OBJECT IDENTIFIER    

lbEthernetPort 1.3.6.1.4.1.43.7.1.14
OBJECT IDENTIFIER    

lbFddiPort 1.3.6.1.4.1.43.7.1.15
OBJECT IDENTIFIER    

lbExpress 1.3.6.1.4.1.43.7.1.16
OBJECT IDENTIFIER    

lbExpressFddiPort 1.3.6.1.4.1.43.7.1.17
OBJECT IDENTIFIER    

lbExpressEthernetPort 1.3.6.1.4.1.43.7.1.18
OBJECT IDENTIFIER    

lbExpressEthernetPortAddress 1.3.6.1.4.1.43.7.1.19
OBJECT IDENTIFIER    

lbPowerSupply 1.3.6.1.4.1.43.7.1.20
OBJECT IDENTIFIER    

lbBridge 1.3.6.1.4.1.43.7.1.21
OBJECT IDENTIFIER    

lbTrapEnterprise 1.3.6.1.4.1.43.7.1.22
OBJECT IDENTIFIER    

lbTrapDest 1.3.6.1.4.1.43.7.1.23
OBJECT IDENTIFIER    

chassisId 1.3.6.1.4.1.43.7.1.1.1
The unique identifier assigned to this station during manufacturing.
OBJECT-TYPE    
  INTEGER  

chassisType 1.3.6.1.4.1.43.7.1.1.2
The type of the LinkBuilder 3GH chassis.
OBJECT-TYPE    
  INTEGER other(1), linkBuilder3GH(2)  

chassisRevision 1.3.6.1.4.1.43.7.1.1.3
The revision number of this chassis.
OBJECT-TYPE    
  STRING Size(1)  

chassisName 1.3.6.1.4.1.43.7.1.1.4
The text string describing this chassis.
OBJECT-TYPE    
  DisplayString Size(0..128)  

chassisNameAbbrev 1.3.6.1.4.1.43.7.1.1.5
The text string describing the generic name for this chassis.
OBJECT-TYPE    
  DisplayString Size(0..128)  

chassisManufacturer 1.3.6.1.4.1.43.7.1.1.6
The text string describing the manufacturer of this chassis.
OBJECT-TYPE    
  DisplayString Size(0..128)  

chassisSlotCount 1.3.6.1.4.1.43.7.1.1.7
The number of slots in this chassis.
OBJECT-TYPE    
  INTEGER  

chassisBuildTime 1.3.6.1.4.1.43.7.1.1.8
The build time of the LinkBuilder 3GH system software.
OBJECT-TYPE    
  DisplayString Size(0..128)  

chassisSoftwareRevision 1.3.6.1.4.1.43.7.1.1.9
The revision number of the LinkBuilder 3GH system software.
OBJECT-TYPE    
  STRING Size(4)  

chassisControlPanelColumns 1.3.6.1.4.1.43.7.1.1.10
The number of columns in the control panel display.
OBJECT-TYPE    
  INTEGER  

chassisControlPanelLines 1.3.6.1.4.1.43.7.1.1.11
The number of lines in the control panel display.
OBJECT-TYPE    
  INTEGER  

chassisControlPanelText 1.3.6.1.4.1.43.7.1.1.12
The text currently displayed in the control panel display.
OBJECT-TYPE    
  DisplayString Size(0..128)  

chassisAction 1.3.6.1.4.1.43.7.1.1.13
This object, when read, always returns the value other (1). The result of setting this object to each acceptable value is: reset: resets the LinkBuilder 3GH system.
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

slotTable 1.3.6.1.4.1.43.7.1.2.1
A list of slot entries. A single instance of this object exists for each slot in the LinkBuilder 3GH chassis.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotEntry

slotEntry 1.3.6.1.4.1.43.7.1.2.1.1
A slot entry contains information common to a specified slot within a LinkBuilder 3GH system.
OBJECT-TYPE    
  SlotEntry  

slotIndex 1.3.6.1.4.1.43.7.1.2.1.1.1
The physical slot number of this slot within the LinkBuilder 3GH chassis.
OBJECT-TYPE    
  INTEGER  

slotBoardType 1.3.6.1.4.1.43.7.1.2.1.1.2
The type of board residing in this slot.
OBJECT-TYPE    
  INTEGER unknown(1), emptySlot(2), smm(3), fbcm(4), fcm(5), elm(6), esm(7), fcm2(8)  

slotBoardRevision 1.3.6.1.4.1.43.7.1.2.1.1.3
The revision number of the board in this slot.
OBJECT-TYPE    
  STRING Size(1)  

slotBoardStatus 1.3.6.1.4.1.43.7.1.2.1.1.4
The status of the board in this slot.
OBJECT-TYPE    
  INTEGER notPresent(1), testing(2), offline(3), online(4)  

slotBoardName 1.3.6.1.4.1.43.7.1.2.1.1.5
The text string describing this board type.
OBJECT-TYPE    
  DisplayString Size(0..256)  

slotBoardNameAbbrev 1.3.6.1.4.1.43.7.1.2.1.1.6
The abbreviation describing this board type.
OBJECT-TYPE    
  DisplayString Size(0..32)  

slotBoardAction 1.3.6.1.4.1.43.7.1.2.1.1.7
This object, when read, always returns the value other (1). The result of setting this object to each acceptable value is: runDiagnostics: runs the board's offline diagnostics.
OBJECT-TYPE    
  INTEGER other(1), runDiagnostics(2)  

smmTable 1.3.6.1.4.1.43.7.1.3.1
A list of System Management Module (SMM) entries. An entry exists for each Slot Table Entry whose board type is SMM. This table is indexed by the physical slot number of this SMM within the LinkBuilder 3GH chassis. The entries need not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the lbSlot table.
OBJECT-TYPE    
  SEQUENCE OF  
    SMMEntry

smmEntry 1.3.6.1.4.1.43.7.1.3.1.1
An SMM entry contains information common to a single System Management Module (SMM) within a LinkBuilder 3GH system.
OBJECT-TYPE    
  SMMEntry  

smmSlotIndex 1.3.6.1.4.1.43.7.1.3.1.1.1
The physical slot number of this slot within the LinkBuilder 3GH chassis.
OBJECT-TYPE    
  INTEGER  

smmEthernetPortCount 1.3.6.1.4.1.43.7.1.3.1.1.2
The number of Ethernet ports on this board.
OBJECT-TYPE    
  INTEGER  

smmBaseEthernetPortIndex 1.3.6.1.4.1.43.7.1.3.1.1.3
The system-wide index for the first Ethernet port on this board.
OBJECT-TYPE    
  INTEGER  

fbcmTable 1.3.6.1.4.1.43.7.1.4.1
A list of FDDI Backbone Connectivity Module (FBCM) entries. An entry exists for each Slot Table Entry whose board type is FBCM. This table is indexed by the physical slot number of this FBCM within the LinkBuilder 3GH chassis. The entries need not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the lbSlot table.
OBJECT-TYPE    
  SEQUENCE OF  
    FBCMEntry

fbcmEntry 1.3.6.1.4.1.43.7.1.4.1.1
An FBCM entry contains information common to a single FDDI Backbone Connectivity Module (FBCM) within a LinkBuilder 3GH system.
OBJECT-TYPE    
  FBCMEntry  

fbcmSlotIndex 1.3.6.1.4.1.43.7.1.4.1.1.1
The physical slot number of this slot within the LinkBuilder 3GH chassis.
OBJECT-TYPE    
  INTEGER  

fbcmMACCount 1.3.6.1.4.1.43.7.1.4.1.1.2
The number of FDDI MACs present on this board.
OBJECT-TYPE    
  INTEGER  

fbcmBaseMACIndex 1.3.6.1.4.1.43.7.1.4.1.1.3
The system-wide index of the first FDDI MAC on this board. Additional MACs on this board will have consecutively increasing MAC indices following this index.
OBJECT-TYPE    
  INTEGER  

fbcmPortCount 1.3.6.1.4.1.43.7.1.4.1.1.4
The number of FDDI ports present on this board.
OBJECT-TYPE    
  INTEGER  

fbcmBasePortIndex 1.3.6.1.4.1.43.7.1.4.1.1.5
The system-wide index of the first FDDI port on this board. Additional ports on this board will have consecutively increasing port indices following this index.
OBJECT-TYPE    
  INTEGER  

fcmTable 1.3.6.1.4.1.43.7.1.5.1
A list of FDDI Concentrator Module (FCM) entries. An entry exists for each Slot Table Entry whose board type is FCM. This table is indexed by the physical slot number of this FCM within the LinkBuilder 3GH chassis. The entries need not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the lbSlot table.
OBJECT-TYPE    
  SEQUENCE OF  
    FCMEntry

fcmEntry 1.3.6.1.4.1.43.7.1.5.1.1
An FCM entry contains information common to a single FDDI Concentrator Module (FCM) within a LinkBuilder 3GH system.
OBJECT-TYPE    
  FCMEntry  

fcmSlotIndex 1.3.6.1.4.1.43.7.1.5.1.1.1
The physical slot number of this slot within the LinkBuilder 3GH chassis.
OBJECT-TYPE    
  INTEGER  

fcmPortCount 1.3.6.1.4.1.43.7.1.5.1.1.2
The number of FDDI ports present on this board.
OBJECT-TYPE    
  INTEGER  

fcmBasePortIndex 1.3.6.1.4.1.43.7.1.5.1.1.3
The system-wide index of the first FDDI port on this board. Additional ports on this board will have consecutively increasing port indices following this index.
OBJECT-TYPE    
  INTEGER  

portTable 1.3.6.1.4.1.43.7.1.6.1
A list of port entries. A single instance of this object exists for each port (excluding Ethernet ports) in the LinkBuilder 3GH system. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available either via the fddiPort group or the enetPort group.
OBJECT-TYPE    
  SEQUENCE OF  
    PortEntry

portEntry 1.3.6.1.4.1.43.7.1.6.1.1
A port entry contains information common to a particular port located on a particular board within the LinkBuilder 3GH system.
OBJECT-TYPE    
  PortEntry  

portSlotIndex 1.3.6.1.4.1.43.7.1.6.1.1.1
The physical slot number of this slot within the LinkBuilder 3GH chassis.
OBJECT-TYPE    
  INTEGER  

portIndex 1.3.6.1.4.1.43.7.1.6.1.1.2
The index of the port on a particular slot.
OBJECT-TYPE    
  INTEGER  

portLabel 1.3.6.1.4.1.43.7.1.6.1.1.3
An ASCII text string describing this port.
OBJECT-TYPE    
  DisplayString Size(0..32)  

elmTable 1.3.6.1.4.1.43.7.1.7.1
A list of Ethernet LAN Module (ELM) entries. An entry exists for each Slot Table Entry whose board type is ELM. This table is indexed by the physical slot number of this ELM within the LinkBuilder 3GH chassis. The entries need not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available either via the slot group or the express group.
OBJECT-TYPE    
  SEQUENCE OF  
    ELMEntry

elmEntry 1.3.6.1.4.1.43.7.1.7.1.1
An ELM entry contains information common to a single Ethernet LAN Module (ELM) within a LinkBuilder 3GH system.
OBJECT-TYPE    
  ELMEntry  

elmSlotIndex 1.3.6.1.4.1.43.7.1.7.1.1.1
The physical slot number of this slot within the LinkBuilder 3GH chassis.
OBJECT-TYPE    
  INTEGER  

elmFddiMACCount 1.3.6.1.4.1.43.7.1.7.1.1.2
The number of FDDI MACs present on this board.
OBJECT-TYPE    
  INTEGER  

elmBaseFddiMACIndex 1.3.6.1.4.1.43.7.1.7.1.1.3
The system-wide index of the first FDDI MAC on this board. Additional ports on this board will have consecutively increasing port indices following this index.
OBJECT-TYPE    
  INTEGER  

elmEthernetPortCount 1.3.6.1.4.1.43.7.1.7.1.1.4
The number of Ethernet ports present on this board.
OBJECT-TYPE    
  INTEGER  

elmBaseEthernetPortIndex 1.3.6.1.4.1.43.7.1.7.1.1.5
The system-wide index of the first Ethernet port on this board. Additional ports on this board will have consecutively increasing port indices following this index.
OBJECT-TYPE    
  INTEGER  

elmAddressThreshold 1.3.6.1.4.1.43.7.1.7.1.1.6
A reporting threshold for the total number of Ethernet addresses known for this board. When the threshold is reached, the event elmAddress- ThresholdEvent is generated.
OBJECT-TYPE    
  INTEGER  

elmFddiMACTable 1.3.6.1.4.1.43.7.1.8.1
A list of ELM FDDI MAC entries. The entries need not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the expressFddiPort group.
OBJECT-TYPE    
  SEQUENCE OF  
    ELMFddiMACEntry

elmFddiMACEntry 1.3.6.1.4.1.43.7.1.8.1.1
An ELM FDDI MAC entry contains information common to an FDDI MAC located on an ELM within a LinkBuilder 3GH system.
OBJECT-TYPE    
  ELMFddiMACEntry  

elmFddiSlotIndex 1.3.6.1.4.1.43.7.1.8.1.1.1
The physical slot number of this board.
OBJECT-TYPE    
  INTEGER  

elmFddiMACIndex 1.3.6.1.4.1.43.7.1.8.1.1.2
A unique value for each FDDI MAC on this board.
OBJECT-TYPE    
  INTEGER  

elmFddiMACForwardedCts 1.3.6.1.4.1.43.7.1.8.1.1.3
A counter indicating the number of frames forwarded by a MAC from an Ethernet port to the FDDI network.
OBJECT-TYPE    
  Counter  

elmFddiMACDroppedCts 1.3.6.1.4.1.43.7.1.8.1.1.4
A counter indicating the number of frames that were dropped by a MAC due to local resource limitation or unknown destination MAC address.
OBJECT-TYPE    
  Counter  

elmEthernetPortTable 1.3.6.1.4.1.43.7.1.9.1
A list of ELM Ethernet LAN port entries. The slot indices may not be consecutive. The MAC indices must be consecutive. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the expressEthernetPort group.
OBJECT-TYPE    
  SEQUENCE OF  
    ELMEthernetPortEntry

elmEthernetPortEntry 1.3.6.1.4.1.43.7.1.9.1.1
An ELM Ethernet LAN port entry contains information common to an Ethernet port located on an Ethernet LAN Module (ELM) within a LinkBuilder 3GH system.
OBJECT-TYPE    
  ELMEthernetPortEntry  

elmEthernetPortSlotIndex 1.3.6.1.4.1.43.7.1.9.1.1.1
The physical slot number of the slot containing this port within the LinkBuilder 3GH chassis.
OBJECT-TYPE    
  INTEGER  

elmEthernetPortIndex 1.3.6.1.4.1.43.7.1.9.1.1.2
The index of the port on a particular ELM board. This index ranges from 1 to elmEthernetPortCount.
OBJECT-TYPE    
  INTEGER  

elmEthernetPortLabel 1.3.6.1.4.1.43.7.1.9.1.1.3
An ASCII text string describing this Ethernet port.
OBJECT-TYPE    
  DisplayString Size(0..32)  

elmEthernetPortForwardedCts 1.3.6.1.4.1.43.7.1.9.1.1.4
A counter indicating the number of frames forwarded from this Ethernet port onto the FDDI network.
OBJECT-TYPE    
  Counter  

elmEthernetPortDroppedCts 1.3.6.1.4.1.43.7.1.9.1.1.5
A counter indicating the numer of frames received on this port that were dropped because the destination MAC address was determined to be on the same Ethernet segment as the source MAC address.
OBJECT-TYPE    
  Counter  

elmEthernetPortUTurnCts 1.3.6.1.4.1.43.7.1.9.1.1.6
A counter indicating the number of frames received on this Ethernet port and directed to another Ethernet port.
OBJECT-TYPE    
  Counter  

elmEthernetPortState 1.3.6.1.4.1.43.7.1.9.1.1.7
The state of the Ethernet LAN port. This value can be set to enable or disable the Ethernet LAN port.
OBJECT-TYPE    
  INTEGER onlineActive(1), onlineInactive(2), offline(3)  

elmEthernetPortAction 1.3.6.1.4.1.43.7.1.9.1.1.8
This object, when read, always returns the value other (1). The result of setting this object to each acceptable value is: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from a port's address list. flushDynamicAddress: causes all a port's dynamic addresses to be flushed from the port's address list.
OBJECT-TYPE    
  INTEGER other(1), freezeAddress(2), flushAddress(3), flushDynamicAddress(4)  

elmEthernetMACAddressTable 1.3.6.1.4.1.43.7.1.10.1
A list of ELM Ethernet LAN Remote MAC Address entries. The slot indices may not be consecutive. The port indices must be consecutive. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the expressEthernetPort group.
OBJECT-TYPE    
  SEQUENCE OF  
    ELMEthernetMACAddressEntry

elmEthernetMACAddressEntry 1.3.6.1.4.1.43.7.1.10.1.1
A collection of information describing a remote Ethernet MAC detected to be attached to an Ethernet LAN port.
OBJECT-TYPE    
  ELMEthernetMACAddressEntry  

elmEthernetMACAddressSlotIndex 1.3.6.1.4.1.43.7.1.10.1.1.1
The physical slot number of the slot containing this ELM within the within th LinkBuilder 3GH chassis.
OBJECT-TYPE    
  INTEGER  

elmEthernetMACAddressPortIndex 1.3.6.1.4.1.43.7.1.10.1.1.2
The port index of this address entry within the table. This index ranges from 1 to elmEthernetPortCount.
OBJECT-TYPE    
  INTEGER  

elmEthernetMACAddressIndex 1.3.6.1.4.1.43.7.1.10.1.1.3
The index of this address entry within the table.
OBJECT-TYPE    
  INTEGER  

elmEthernetMACAddressType 1.3.6.1.4.1.43.7.1.10.1.1.4
This object, when read, always returns the value other (1). Setting this object to invalid (2) removes the corresponding address entry from the table.
OBJECT-TYPE    
  INTEGER other(1), invalid(2)  

elmEthernetMACAddressRemoteAddress 1.3.6.1.4.1.43.7.1.10.1.1.5
The remote MAC address detected on this Ethernet LAN port.
OBJECT-TYPE    
  STRING Size(6)  

elmEthernetMACAddressIsStatic 1.3.6.1.4.1.43.7.1.10.1.1.6
A value indicating whether this MAC address was statically configured or dynamically learned on this port.
OBJECT-TYPE    
  INTEGER isStatic(1), isDynamic(2)  

elmEthernetMACAddressStaticPort 1.3.6.1.4.1.43.7.1.10.1.1.7
If the object elmEthernetMACAddress- IsStatic has value isStatic(1), this object indicates the port for which this MAC address was statically configured.
OBJECT-TYPE    
  INTEGER  

elmEthernetMACAddressAge 1.3.6.1.4.1.43.7.1.10.1.1.8
This object indicates the time elapsed since this MAC address was added to this port's address table.
OBJECT-TYPE    
  INTEGER  

lbSystemId 1.3.6.1.4.1.43.7.1.11.1
The unique identifier assigned to this system during manufacturing.
OBJECT-TYPE    
  INTEGER  

lbSystemType 1.3.6.1.4.1.43.7.1.11.2
The type of the LinkBuilder system.
OBJECT-TYPE    
  INTEGER other(1), tweleveSlot(2), fourSlot(3)  

lbSystemName 1.3.6.1.4.1.43.7.1.11.3
The text string describing this system.
OBJECT-TYPE    
  DisplayString Size(0..128)  

lbSystemManufacturer 1.3.6.1.4.1.43.7.1.11.4
The text string describing the manufacturer of this system.
OBJECT-TYPE    
  DisplayString Size(0..128)  

lbSystemBackplaneRevision 1.3.6.1.4.1.43.7.1.11.5
The revision level of the system backplane. Bits 6 and 7 indicate the artwork revision. Bits 0 through 5 indicate the rework level.
OBJECT-TYPE    
  STRING Size(1)  

lbSystemSlotCount 1.3.6.1.4.1.43.7.1.11.6
The number of slots in the system.
OBJECT-TYPE    
  INTEGER  

lbSystemMemorySize 1.3.6.1.4.1.43.7.1.11.7
The amount of memory (RAM), in bytes, present on the system processor board.
OBJECT-TYPE    
  INTEGER  

lbSystemFlashMemorySize 1.3.6.1.4.1.43.7.1.11.8
The amount of flash memory, in bytes, present on the system processor board.
OBJECT-TYPE    
  INTEGER  

lbSystemNvMemorySize 1.3.6.1.4.1.43.7.1.11.9
The amount of non-volatile memory, in bytes, present on the system processor board.
OBJECT-TYPE    
  INTEGER  

lbSystemSoftwareRevision 1.3.6.1.4.1.43.7.1.11.10
The revision number of the LinkBuilder system software. Each byte indicates the following: byte 0: major release number. byte 1: minor release number. byte 2: update number. byte 3: bits 7-6: release type. bits 5-0: supplemental identifier.
OBJECT-TYPE    
  STRING Size(4)  

lbSystemBuildTime 1.3.6.1.4.1.43.7.1.11.11
The build time of the system software.
OBJECT-TYPE    
  DisplayString Size(0..128)  

lbSystemControlPanelHardwareRevision 1.3.6.1.4.1.43.7.1.11.12
An 8-bit value specifying the revision level of the control panel hardware.
OBJECT-TYPE    
  STRING Size(1)  

lbSystemControlPanelSoftwareRevision 1.3.6.1.4.1.43.7.1.11.13
An 8-bit value specifying the revision level of the control panel software.
OBJECT-TYPE    
  STRING Size(1)  

lbSystemControlPanelLines 1.3.6.1.4.1.43.7.1.11.14
The number of lines in the control panel display.
OBJECT-TYPE    
  INTEGER  

lbSystemControlPanelColumns 1.3.6.1.4.1.43.7.1.11.15
The number of columns in the control panel display.
OBJECT-TYPE    
  INTEGER  

lbSystemControlPanelText 1.3.6.1.4.1.43.7.1.11.16
The currently displayed text in the control panel display.
OBJECT-TYPE    
  STRING Size(0..128)  

lbSystemFddiMacCount 1.3.6.1.4.1.43.7.1.11.17
The number of FDDI MAC's present in the system.
OBJECT-TYPE    
  INTEGER  

lbSystemFddiPortCount 1.3.6.1.4.1.43.7.1.11.18
The number of FDDI ports present in the system.
OBJECT-TYPE    
  INTEGER  

lbSystemEthernetPortCount 1.3.6.1.4.1.43.7.1.11.19
The number of ethernet ports present in the system.
OBJECT-TYPE    
  INTEGER  

lbSystemExpressFunctionCount 1.3.6.1.4.1.43.7.1.11.20
The number of Ethernet Express functions present in the system. Curently this value is equal to the number of Express boards present in the system.
OBJECT-TYPE    
  INTEGER  

lbSystemExpressFddiPortCount 1.3.6.1.4.1.43.7.1.11.21
The number of Ethernet Express FDDI ports present in the system.
OBJECT-TYPE    
  INTEGER  

lbSystemExpressEthernetPortCount 1.3.6.1.4.1.43.7.1.11.22
The number of Ethernet Express ethernet ports present in the system.
OBJECT-TYPE    
  INTEGER  

lbSystemPowerSupplyCount 1.3.6.1.4.1.43.7.1.11.23
The number of power supply units present in the system.
OBJECT-TYPE    
  INTEGER  

lbSystemAction 1.3.6.1.4.1.43.7.1.11.24
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: reset: resets the LinkBuilder system.
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

lbSystemBridgeFunctionCount 1.3.6.1.4.1.43.7.1.11.25
The number of bridge functions present in the system. Curently this value is equal to the sum of the number of Express and Switching modules in the system.
OBJECT-TYPE    
  INTEGER  

lbSystemSmtProxyTimeoutBase 1.3.6.1.4.1.43.7.1.11.26
The initial timeout value, in seconds, before the SMT proxy attempts to backoff and retry. Since the SMT proxy will attempt three retries before determining that the proxied station is not answering, with the timeout doubling for each retry, the total time for a request to time out is equal to seven times the base timeout value.
OBJECT-TYPE    
  INTEGER 1..10  

lbSystemSmtProxyEvents 1.3.6.1.4.1.43.7.1.11.27
This object determines if the SMT proxy will generate traps for SMT events occuring at other stations. If enabled, the SMT proxy will generate traps for all SMT events, those that occur locally, and those that occur at other stations. If disabled, the SMT proxy will only generate traps for events which occur locally. The default value for this object is enabled(1).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

lbSlotTable 1.3.6.1.4.1.43.7.1.12.1
A list of slot entries. A single instance of this object exists for each slot in the LinkBuilder system.
OBJECT-TYPE    
  SEQUENCE OF  
    LbSlotEntry

lbSlotEntry 1.3.6.1.4.1.43.7.1.12.1.1
A slot entry contains information common to a given slot within a LinkBuilder system.
OBJECT-TYPE    
  LbSlotEntry  

lbSlotIndex 1.3.6.1.4.1.43.7.1.12.1.1.1
The physical slot number of this slot within the system.
OBJECT-TYPE    
  INTEGER  

lbSlotBoardType 1.3.6.1.4.1.43.7.1.12.1.1.2
The type of board residing in this slot.
OBJECT-TYPE    
  INTEGER unknown(1), emptySlot(2), spm(3), feam(4), fcm(5), elm(6), esm(7), fcm2(8)  

lbSlotBoardRevision 1.3.6.1.4.1.43.7.1.12.1.1.3
The revision number of the board in this slot.
OBJECT-TYPE    
  STRING Size(1)  

lbSlotBoardStatus 1.3.6.1.4.1.43.7.1.12.1.1.4
The status of the board in this slot.
OBJECT-TYPE    
  INTEGER notPresent(1), testing(2), offline(3), online(4)  

lbSlotBoardName 1.3.6.1.4.1.43.7.1.12.1.1.5
The text string describing this board.
OBJECT-TYPE    
  DisplayString Size(0..256)  

lbSlotBoardNameAbbrev 1.3.6.1.4.1.43.7.1.12.1.1.6
The abbreviation used to describe this board.
OBJECT-TYPE    
  DisplayString Size(0..32)  

lbSlotFddiMacCount 1.3.6.1.4.1.43.7.1.12.1.1.7
The number of FDDI MAC's present in this slot.
OBJECT-TYPE    
  INTEGER  

lbSlotFddiMacBaseIndex 1.3.6.1.4.1.43.7.1.12.1.1.8
The index of the first FDDI MAC in this slot.
OBJECT-TYPE    
  INTEGER  

lbSlotFddiPortCount 1.3.6.1.4.1.43.7.1.12.1.1.9
The number of FDDI ports present in this slot.
OBJECT-TYPE    
  INTEGER  

lbSlotFddiPortBaseIndex 1.3.6.1.4.1.43.7.1.12.1.1.10
The index of the first FDDI port in this slot.
OBJECT-TYPE    
  INTEGER  

lbSlotEthernetPortCount 1.3.6.1.4.1.43.7.1.12.1.1.11
The number of ethernet ports present in this slot.
OBJECT-TYPE    
  INTEGER  

lbSlotEthernetPortBaseIndex 1.3.6.1.4.1.43.7.1.12.1.1.12
The index of the first ethernet port in this slot.
OBJECT-TYPE    
  INTEGER  

lbSlotExpressFunctionCount 1.3.6.1.4.1.43.7.1.12.1.1.13
The number of Express functions present in this slot.
OBJECT-TYPE    
  INTEGER  

lbSlotExpressFunctionBaseIndex 1.3.6.1.4.1.43.7.1.12.1.1.14
The index of the first Express function in this slot.
OBJECT-TYPE    
  INTEGER  

lbSlotExpressFddiPortCount 1.3.6.1.4.1.43.7.1.12.1.1.15
The number of Express FDDI ports present in this slot.
OBJECT-TYPE    
  INTEGER  

lbSlotExpressFddiPortBaseIndex 1.3.6.1.4.1.43.7.1.12.1.1.16
The index of the first Express FDDI port in this slot.
OBJECT-TYPE    
  INTEGER  

lbSlotExpressEthernetPortCount 1.3.6.1.4.1.43.7.1.12.1.1.17
The number of Express ethernet ports present in this slot.
OBJECT-TYPE    
  INTEGER  

lbSlotExpressEthernetPortBaseIndex 1.3.6.1.4.1.43.7.1.12.1.1.18
The index of the first Express ethernet port in this slot.
OBJECT-TYPE    
  INTEGER  

lbSlotBoardAction 1.3.6.1.4.1.43.7.1.12.1.1.19
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: runDiagnostics: runs the board's offline diagnostics.
OBJECT-TYPE    
  INTEGER other(1), runDiagnostics(2)  

lbSlotBridgeFunctionCount 1.3.6.1.4.1.43.7.1.12.1.1.20
The number of bridge functions present in this slot.
OBJECT-TYPE    
  INTEGER  

lbSlotBridgeFunctionBaseIndex 1.3.6.1.4.1.43.7.1.12.1.1.21
The index of the first bridge function in this slot.
OBJECT-TYPE    
  INTEGER  

lbFddiMacTable 1.3.6.1.4.1.43.7.1.13.1
A list of FDDI MAC entries. A single instance of this object exists for each FDDI MAC present in the system.
OBJECT-TYPE    
  SEQUENCE OF  
    LbFddiMacEntry

lbFddiMacEntry 1.3.6.1.4.1.43.7.1.13.1.1
An FDDI MAC entry contains information common to a particular FDDI MAC within the system.
OBJECT-TYPE    
  LbFddiMacEntry  

lbFddiMacIndex 1.3.6.1.4.1.43.7.1.13.1.1.1
A unique value for each FDDI MAC in the system. The MAC identified by a particular value of this index is the same MAC as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

lbFddiMacSlotIndex 1.3.6.1.4.1.43.7.1.13.1.1.2
The slot number corresponding to the physical location of this MAC.
OBJECT-TYPE    
  INTEGER  

lbFddiMacLocalIndex 1.3.6.1.4.1.43.7.1.13.1.1.3
The index of this MAC relative to the slot on which it is physically present.
OBJECT-TYPE    
  INTEGER  

lbFddiMacByteReceiveRate 1.3.6.1.4.1.43.7.1.13.1.1.4
The average number of bytes received per second by this MAC during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

lbFddiMacPeakByteReceiveRate 1.3.6.1.4.1.43.7.1.13.1.1.5
The peak value of lbFddiMacByteReceiveRate for this MAC since the system was last initialized.
OBJECT-TYPE    
  INTEGER  

lbFddiMacFrameReceiveRate 1.3.6.1.4.1.43.7.1.13.1.1.6
The average number of frames received per second by this MAC during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

lbFddiMacPeakFrameReceiveRate 1.3.6.1.4.1.43.7.1.13.1.1.7
The peak value of lbFddiMacFrameReceiveRate for this MAC since the system was last initialized.
OBJECT-TYPE    
  INTEGER  

lbFddiMacByteTransmitRate 1.3.6.1.4.1.43.7.1.13.1.1.8
The average number of bytes transmitted per second by this MAC during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

lbFddiMacPeakByteTransmitRate 1.3.6.1.4.1.43.7.1.13.1.1.9
The peak value of lbFddiMacByteTransmitRate for this MAC since the system was last initialized.
OBJECT-TYPE    
  INTEGER  

lbFddiMacFrameTransmitRate 1.3.6.1.4.1.43.7.1.13.1.1.10
The average number of frames transmitted per second by this MAC during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

lbFddiMacPeakFrameTransmitRate 1.3.6.1.4.1.43.7.1.13.1.1.11
The peak value of lbFddiMacFrameTransmitRate for this MAC since the system was last initialized.
OBJECT-TYPE    
  INTEGER  

lbFddiMacReceiveMulticastThreshold 1.3.6.1.4.1.43.7.1.13.1.1.12
The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is one second. The default value for this object is zero which implies an infinite rate.
OBJECT-TYPE    
  INTEGER  

lbFddiMacBeaconHistory 1.3.6.1.4.1.43.7.1.13.1.1.13
This object gives a history of the most recent beacon information received on this MAC. It can contain up to a maximum of eight records. Each record is of the form: source MAC: 6 bytes beacon data length: 2 bytes. beacon data: 0-16 bytes.
OBJECT-TYPE    
  STRING Size(0..256)  

lbEthernetPortTable 1.3.6.1.4.1.43.7.1.14.1
A list of ethernet port entries. A single instance of this object exists for each ethernet port present in the system.
OBJECT-TYPE    
  SEQUENCE OF  
    LbEthernetPortEntry

lbEthernetPortEntry 1.3.6.1.4.1.43.7.1.14.1.1
An ethernet port entry contains information common to a particular ethernet port within the system.
OBJECT-TYPE    
  LbEthernetPortEntry  

lbEthernetPortIndex 1.3.6.1.4.1.43.7.1.14.1.1.1
A unique value for each ethernet port in the system. The port identified by a particular value of this index is the same port as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

lbEthernetPortSlotIndex 1.3.6.1.4.1.43.7.1.14.1.1.2
The slot number corresponding to the physical location of this port.
OBJECT-TYPE    
  INTEGER  

lbEthernetPortLocalIndex 1.3.6.1.4.1.43.7.1.14.1.1.3
The index of this port relative to the slot on which it is physically present.
OBJECT-TYPE    
  INTEGER  

lbEthernetPortLabel 1.3.6.1.4.1.43.7.1.14.1.1.4
An ASCII text string describing this port.
OBJECT-TYPE    
  DisplayString Size(0..32)  

lbEthernetPortChipsetType 1.3.6.1.4.1.43.7.1.14.1.1.5
The type of chipset used to implement this port.
OBJECT-TYPE    
  INTEGER other(1), chipsetAMD79900(2), chipsetIntel82586(3), chipsetIntel82596(4), chipsetSEEQ8003(5), chipsetNational8390(6), chipsetNationalSonic(7), chipsetFujitsu86950(8)  

lbEthernetPortLinkStatus 1.3.6.1.4.1.43.7.1.14.1.1.6
The current value of the link status for this port.
OBJECT-TYPE    
  INTEGER active(1), inActive(2)  

lbEthernetPortByteReceiveRate 1.3.6.1.4.1.43.7.1.14.1.1.7
The average number of bytes received per second by this port during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

lbEthernetPortPeakByteReceiveRate 1.3.6.1.4.1.43.7.1.14.1.1.8
The peak value of lbEthernetPortByteReceiveRate for this port since the system was last initialized.
OBJECT-TYPE    
  INTEGER  

lbEthernetPortFrameReceiveRate 1.3.6.1.4.1.43.7.1.14.1.1.9
The average number of frames received per second by this port during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

lbEthernetPortPeakFrameReceiveRate 1.3.6.1.4.1.43.7.1.14.1.1.10
The peak value of lbEthernetPortFrameReceiveRate for this port since the system was last initialized.
OBJECT-TYPE    
  INTEGER  

lbEthernetPortByteTransmitRate 1.3.6.1.4.1.43.7.1.14.1.1.11
The average number of bytes transmitted per second by this port during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

lbEthernetPortPeakByteTransmitRate 1.3.6.1.4.1.43.7.1.14.1.1.12
The peak value of lbEthernetPortByteTransmitRate for this port since the system was last initialized.
OBJECT-TYPE    
  INTEGER  

lbEthernetPortFrameTransmitRate 1.3.6.1.4.1.43.7.1.14.1.1.13
The average number of frames transmitted per second by this port during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

lbEthernetPortPeakFrameTransmitRate 1.3.6.1.4.1.43.7.1.14.1.1.14
The peak value of lbEthernetPortFrameTransmitRate for this port since the system was last initialized.
OBJECT-TYPE    
  INTEGER  

lbEthernetPortReceiveMulticastThreshold 1.3.6.1.4.1.43.7.1.14.1.1.15
The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is one second. The default value for this object is zero which implies an infinite rate.
OBJECT-TYPE    
  INTEGER  

lbEthernetPortType 1.3.6.1.4.1.43.7.1.14.1.1.16
Specific description of this port's type.
OBJECT-TYPE    
  INTEGER telco10BaseT(1), rj4510BaseT(2), foirl(3), aui(4), other(5)  

lbFddiPortTable 1.3.6.1.4.1.43.7.1.15.1
A list of FDDI port entries. A single instance of this object exists for each FDDI port in the system.
OBJECT-TYPE    
  SEQUENCE OF  
    LbFddiPortEntry

lbFddiPortEntry 1.3.6.1.4.1.43.7.1.15.1.1
A Port entry contains information common to a particular FDDI port in the system.
OBJECT-TYPE    
  LbFddiPortEntry  

lbFddiPortIndex 1.3.6.1.4.1.43.7.1.15.1.1.1
A unique value for each FDDI port in the system. It's value ranges between 1 and the value of lbSystemFddiPortCount.
OBJECT-TYPE    
  INTEGER  

lbFddiPortSlotIndex 1.3.6.1.4.1.43.7.1.15.1.1.2
The slot number corresponding to the physical location of this port.
OBJECT-TYPE    
  INTEGER  

lbFddiPortLocalIndex 1.3.6.1.4.1.43.7.1.15.1.1.3
The index of this port relative to the slot on which it is physically present.
OBJECT-TYPE    
  INTEGER  

lbFddiPortLabel 1.3.6.1.4.1.43.7.1.15.1.1.4
An ASCII text string describing this port.
OBJECT-TYPE    
  DisplayString Size(0..32)  

lbExpressTable 1.3.6.1.4.1.43.7.1.16.1
A list of Express function entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LbExpressEntry

lbExpressEntry 1.3.6.1.4.1.43.7.1.16.1.1
An Express entry contains information common to a particular Express function in a given system.
OBJECT-TYPE    
  LbExpressEntry  

lbExpressIndex 1.3.6.1.4.1.43.7.1.16.1.1.1
A unique value for each Express function in the system. It's value ranges between 1 and the value of lbSystemExpressFunctionCount.
OBJECT-TYPE    
  INTEGER  

lbExpressSlotIndex 1.3.6.1.4.1.43.7.1.16.1.1.2
The slot number corresponding to the physical location of this function.
OBJECT-TYPE    
  INTEGER  

lbExpressLocalIndex 1.3.6.1.4.1.43.7.1.16.1.1.3
The index of this function relative to the slot on which it is physically present.
OBJECT-TYPE    
  INTEGER  

lbExpressAddressThreshold 1.3.6.1.4.1.43.7.1.16.1.1.4
A reporting threshold for the total number of Ethernet Addresses known for this board. When this threshold is reached, the event lbEemAddressThresholdEvent is generated.
OBJECT-TYPE    
  INTEGER  

lbExpressFddiPortTable 1.3.6.1.4.1.43.7.1.17.1
A list of Express FDDI port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LbExpressFddiPortEntry

lbExpressFddiPortEntry 1.3.6.1.4.1.43.7.1.17.1.1
A Port entry contains information for a particular Express FDDI port in a given system.
OBJECT-TYPE    
  LbExpressFddiPortEntry  

lbExpressFddiPortIndex 1.3.6.1.4.1.43.7.1.17.1.1.1
A unique value for each Express port in the system. It's value ranges between 1 and the value of lbSystemExpressFddiPortCount.
OBJECT-TYPE    
  INTEGER  

lbExpressFddiPortSlotIndex 1.3.6.1.4.1.43.7.1.17.1.1.2
The slot number corresponding to the physical location of this port.
OBJECT-TYPE    
  INTEGER  

lbExpressFddiPortLocalIndex 1.3.6.1.4.1.43.7.1.17.1.1.3
The index of this port relative to the slot on which it is physically present.
OBJECT-TYPE    
  INTEGER  

lbExpressFddiPortForwardedCts 1.3.6.1.4.1.43.7.1.17.1.1.4
The number of frames forwarded by this MAC from an ethernet port to the FDDI network.
OBJECT-TYPE    
  Counter  

lbExpressFddiPortDroppedCts 1.3.6.1.4.1.43.7.1.17.1.1.5
The number of frames received by this MAC that were not forwarded.
OBJECT-TYPE    
  Counter  

lbExpressEthernetPortTable 1.3.6.1.4.1.43.7.1.18.1
A list of Express ethernet port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LbExpressEthernetPortEntry

lbExpressEthernetPortEntry 1.3.6.1.4.1.43.7.1.18.1.1
An Expres ethernet port entry contains information common to a particular Express ethernet port located in the system.
OBJECT-TYPE    
  LbExpressEthernetPortEntry  

lbExpressEthernetPortIndex 1.3.6.1.4.1.43.7.1.18.1.1.1
A unique value for each Express ethernet port in the system. It's value ranges between 1 and the value of lbSystemExpressEthernetPortCount.
OBJECT-TYPE    
  INTEGER  

lbExpressEthernetPortSlotIndex 1.3.6.1.4.1.43.7.1.18.1.1.2
The slot number corresponding to the physical location of this port.
OBJECT-TYPE    
  INTEGER  

lbExpressEthernetPortLocalIndex 1.3.6.1.4.1.43.7.1.18.1.1.3
The index of this port relative to the slot on which it is physically present.
OBJECT-TYPE    
  INTEGER  

lbExpressEthernetPortForwardedCts 1.3.6.1.4.1.43.7.1.18.1.1.4
The number of frames forwarded from this ethernet port to the FDDI network.
OBJECT-TYPE    
  Counter  

lbExpressEthernetPortDroppedCts 1.3.6.1.4.1.43.7.1.18.1.1.5
The number of frames received by this ethernet port that were not forwarded or u-turned.
OBJECT-TYPE    
  Counter  

lbExpressEthernetPortUTurnCts 1.3.6.1.4.1.43.7.1.18.1.1.6
The number of frames received by this ethernet port that were directed to another ethernet port.
OBJECT-TYPE    
  Counter  

lbExpressEthernetPortAction 1.3.6.1.4.1.43.7.1.18.1.1.7
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from a port's address list. flushDynamicAddress: causes all the port's dynamic addresses to be flushed from a port's address list.
OBJECT-TYPE    
  INTEGER other(1), freezeAddress(2), flushAddress(3), flushDynamicAddress(4)  

lbExpressEthernetPortAddressTable 1.3.6.1.4.1.43.7.1.19.1
A list of Express Remote MAC Address entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LbExpressEthernetPortAddressEntry

lbExpressEthernetPortAddressEntry 1.3.6.1.4.1.43.7.1.19.1.1
An entry contains information describing a remote Ethernet MAC detected to be attached to an Express port.
OBJECT-TYPE    
  LbExpressEthernetPortAddressEntry  

lbExpressEthernetPortAddressPortIndex 1.3.6.1.4.1.43.7.1.19.1.1.1
A unique value for each Express ethernet port in the system. It's value ranges between 1 and the value of lbSystemExpressEthernetPortCount.
OBJECT-TYPE    
  INTEGER  

lbExpressEthernetPortAddressIndex 1.3.6.1.4.1.43.7.1.19.1.1.2
The index of this address entry within the address table.
OBJECT-TYPE    
  INTEGER  

lbExpressEthernetPortAddressSlotIndex 1.3.6.1.4.1.43.7.1.19.1.1.3
The slot number corresponding to the physical location of this port.
OBJECT-TYPE    
  INTEGER  

lbExpressEthernetPortAddressType 1.3.6.1.4.1.43.7.1.19.1.1.4
This object, when read, always returns the value other (1). Setting this object to invalid (2) will remove the corresponding address entry from the table.
OBJECT-TYPE    
  INTEGER other(1), invalid(2)  

lbExpressEthernetPortAddressRemoteAddress 1.3.6.1.4.1.43.7.1.19.1.1.5
The remote MAC address detected on this port.
OBJECT-TYPE    
  STRING Size(6)  

lbExpressEthernetPortAddressIsStatic 1.3.6.1.4.1.43.7.1.19.1.1.6
A value indicating whether this MAC address was statically configured or was dynamically learned on this port.
OBJECT-TYPE    
  INTEGER isStatic(1), isDynamic(2)  

lbExpressEthernetPortAddressStaticPort 1.3.6.1.4.1.43.7.1.19.1.1.7
If the object lbExpressEthernetPortAddressIsStatic has value isStatic(1), this object indicates the port for which this MAC address was statically configured.
OBJECT-TYPE    
  INTEGER  

lbExpressEthernetPortAddressAge 1.3.6.1.4.1.43.7.1.19.1.1.8
This object indicates the time, in seconds, elapsed since this MAC address was added to this port's address table.
OBJECT-TYPE    
  INTEGER  

lbPowerSupplyTable 1.3.6.1.4.1.43.7.1.20.1
A list of power supply entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LbPowerSupplyEntry

lbPowerSupplyEntry 1.3.6.1.4.1.43.7.1.20.1.1
A power supply entry contains information common for a particular power supply unit in the system.
OBJECT-TYPE    
  LbPowerSupplyEntry  

lbPowerSupplyIndex 1.3.6.1.4.1.43.7.1.20.1.1.1
A unique value for each power supply in the system. It's value ranges between 1 and the value of lbSystemPowerSupplyCount.
OBJECT-TYPE    
  INTEGER  

lbPowerSupplyLocation 1.3.6.1.4.1.43.7.1.20.1.1.2
The physical slot in which this power supply unit resides in the system.
OBJECT-TYPE    
  INTEGER  

lbPowerSupplyStatus 1.3.6.1.4.1.43.7.1.20.1.1.3
The status of the power supply. A value of 0 indicates a working unit. A non-zero value represents a bit mask of the possible failure types. Each set bit indicates the following failure type: bit0: systemAcFailure bit1: systemPlus5Failure bit2: systemPlus12Failure bit3: systemOverTemperatureFailure.
OBJECT-TYPE    
  INTEGER  

lbPowerSupplyFailureType 1.3.6.1.4.1.43.7.1.20.1.1.4
This object is sent in the varlist when the lbPowerSupplyFailureEvent trap is generated. It indicates the particular failure type that caused this trap to be generated.
OBJECT-TYPE    
  INTEGER systemAcFailure(1), systemPlus5Failure(2), systemPlus12Failure(3), systemOverTemperatureFailure(4)  

lbPowerSupplyLastFailure 1.3.6.1.4.1.43.7.1.20.1.1.5
This object represents the most recent power supply failure type. If no failure has occured, the value of this object is none. This object is included in the varlist when the lbPowerSupplyFailureEvent trap is generated. It indicates the failure type that caused the trap to be generated.
OBJECT-TYPE    
  INTEGER systemAcFailure(1), systemPlus5Failure(2), systemPlus12Failure(3), systemOverTemperatureFailure(4), none(5)  

lbBridgeTable 1.3.6.1.4.1.43.7.1.21.1
A list of bridge function entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LbBridgeEntry

lbBridgeEntry 1.3.6.1.4.1.43.7.1.21.1.1
A bridge entry contains information common to a particular bridge function in a given system.
OBJECT-TYPE    
  LbBridgeEntry  

lbBridgeIndex 1.3.6.1.4.1.43.7.1.21.1.1.1
A unique value for each bridge function in the system. It's value ranges between 1 and the value of lbSystemBridgeFunctionCount.
OBJECT-TYPE    
  INTEGER  

lbBridgeBaseSlotIndex 1.3.6.1.4.1.43.7.1.21.1.1.2
The slot number of the lowest numbered slot which contains a physical port that this bridge function controls.
OBJECT-TYPE    
  INTEGER  

lbBridgePortCount 1.3.6.1.4.1.43.7.1.21.1.1.3
The number of ports that this bridge function controls.
OBJECT-TYPE    
  INTEGER  

lbBridgeAddressTableSize 1.3.6.1.4.1.43.7.1.21.1.1.4
The size of the address table for this bridge function.
OBJECT-TYPE    
  INTEGER  

lbBridgeAddressThreshold 1.3.6.1.4.1.43.7.1.21.1.1.5
A reporting threshold for the total number of addresses known for this board. When this threshold is reached, the event lbBridgeAddressThresholdEvent is generated. The range of valid values for setting this object is between 1 and the value reported by lbBridgeAddressTableSize + 1 (Note that this range applies to values issued in set requests. The current value may be outside this range, for example if the value of lbBridgeMode is changed). Setting this object to one greater than the address table size disables the generation of lbBridgeAddressThresholdEvents since the limit will never be reached.
OBJECT-TYPE    
  INTEGER  

lbBridgeMode 1.3.6.1.4.1.43.7.1.21.1.1.6
The operational mode of this bridge function. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operation.
OBJECT-TYPE    
  INTEGER expressMode(1), ieee8021dBridgeMode(2), notSupported(3)  

lbBridgeLocalIndex 1.3.6.1.4.1.43.7.1.21.1.1.7
The index of this bridge function relative to the slot on which it is physically present.
OBJECT-TYPE    
  INTEGER  

lbBridgePortTable 1.3.6.1.4.1.43.7.1.21.2
A list of bridge port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LbBridgePortEntry

lbBridgePortEntry 1.3.6.1.4.1.43.7.1.21.2.1
A Port entry contains information for a particular bridge port in a given system.
OBJECT-TYPE    
  LbBridgePortEntry  

lbBridgePortBridgeIndex 1.3.6.1.4.1.43.7.1.21.2.1.1
A unique value for each bridge function in the system. It's value ranges between 1 and the value of lbSystemBridgeFunctionCount.
OBJECT-TYPE    
  INTEGER  

lbBridgePortIndex 1.3.6.1.4.1.43.7.1.21.2.1.2
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references.
OBJECT-TYPE    
  INTEGER  

lbBridgePortSlotIndex 1.3.6.1.4.1.43.7.1.21.2.1.3
The slot number corresponding to the physical location of this port.
OBJECT-TYPE    
  INTEGER  

lbBridgePortLocalIndex 1.3.6.1.4.1.43.7.1.21.2.1.4
The index of this port relative to the slot on which it is physically present and its port type. For example FDDI ports in a slot are identified with local indices from 1 to the number of FDDI ports in that slot, and the Ethernet ports in the same slot are identified with local indices from 1 to the number of Ethernet ports in that slot.
OBJECT-TYPE    
  INTEGER  

lbBridgePortType 1.3.6.1.4.1.43.7.1.21.2.1.5
The type of this port.
OBJECT-TYPE    
  INTEGER ethernet(1), fddi(2), other(3)  

lbBridgePortIpFragmentationEnabled 1.3.6.1.4.1.43.7.1.21.2.1.6
A flag indicating whether or not IP fragmentation is enabled on this bridge port. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operation.
OBJECT-TYPE    
  INTEGER true(1), false(2), notSupported(3)  

lbBridgePortReceiveMulticastLimit 1.3.6.1.4.1.43.7.1.21.2.1.7
The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is four seconds. The default value for this object is zero which implies an infinite rate.
OBJECT-TYPE    
  INTEGER 0..65535  

lbBridgePortAddressAction 1.3.6.1.4.1.43.7.1.21.2.1.8
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from the port's address list. flushDynamicAddress: causes all dynamic addresses to be flushed from the port's address list.
OBJECT-TYPE    
  INTEGER other(1), freezeAddress(2), flushAddress(3), flushDynamicAddress(4)  

lbBridgePortTotalForwardedCts 1.3.6.1.4.1.43.7.1.21.2.1.9
The total number of frames forwarded from this port to all other ports of this bridge. Note that the total forwarded count is NOT equal to the receive count minus the discard count, as a single received multicast/broadcast frame can be forwarded to multiple bridge ports. Also frames which are 'flooded' because of unknown destination addresses account for multiple forwarding as well. The total forwarding count is the instantaneous sumation of the 'forwarded to' counts to all other ports of the bridge.
OBJECT-TYPE    
  Counter  

lbBridgePortManagementFramesReceived 1.3.6.1.4.1.43.7.1.21.2.1.10
The number of bridge management frames received by this port.
OBJECT-TYPE    
  Counter  

lbBridgePortTotalDiscards 1.3.6.1.4.1.43.7.1.21.2.1.11
The total number of frames discarded by this port.
OBJECT-TYPE    
  Counter  

lbBridgePortReceiveBlockedDiscards 1.3.6.1.4.1.43.7.1.21.2.1.12
The number of frames discarded by this port because the the receiving bridge port was not in the 'forwarding' state.
OBJECT-TYPE    
  Counter  

lbBridgePortReceiveMulticastLimitExceededs 1.3.6.1.4.1.43.7.1.21.2.1.13
The number of multicast/broadcast frames discarded by this port because the lbBridgePortReceiveMulticastLimit was exceeded.
OBJECT-TYPE    
  Counter  

lbBridgePortReceiveSecurityDiscards 1.3.6.1.4.1.43.7.1.21.2.1.14
The number of frames discarded by this port because they contained source addresses which were statically configured on another bridge port. A statically configured address (station), which is not allowed to move, appears to have moved.
OBJECT-TYPE    
  Counter  

lbBridgePortReceiveUnknownDiscards 1.3.6.1.4.1.43.7.1.21.2.1.15
The number of frames discarded by this port because the destination address was unknown. Note that this counter is only valid for FDDI ports, and only when the bridge is an EEM, or an ESM operating in express mode.
OBJECT-TYPE    
  Counter  

lbBridgePortReceiveOtherDiscards 1.3.6.1.4.1.43.7.1.21.2.1.16
The number of frames discarded by this port because they contained either invalid (group) source addresses or source addresses belonging to this bridge (indicative of network loops).
OBJECT-TYPE    
  Counter  

lbBridgePortReceiveErrorDiscards 1.3.6.1.4.1.43.7.1.21.2.1.17
The number of frames discarded by this port because of internal bridge system errors (e.g., hardware and software address table discrepencies).
OBJECT-TYPE    
  Counter  

lbBridgePortSameSegmentDiscards 1.3.6.1.4.1.43.7.1.21.2.1.18
The number of frames discarded by this port because the destination address is known on the same network segment as the source address, i.e., the frame does not need to be bridged.
OBJECT-TYPE    
  Counter  

lbBridgePortTransmitBlockedDiscards 1.3.6.1.4.1.43.7.1.21.2.1.19
The number of frames discarded by this port because the the transmitting bridge port was not in the 'forwarding' state.
OBJECT-TYPE    
  Counter  

lbBridgePortTotalFiltered 1.3.6.1.4.1.43.7.1.21.2.1.20
The total number of frames discarded by this port due to user defined filters.
OBJECT-TYPE    
  Counter  

lbBridgePortReceiveUnicastFiltered 1.3.6.1.4.1.43.7.1.21.2.1.21
The number of frames discarded by this port due to user defined receive path filters.
OBJECT-TYPE    
  Counter  

lbBridgePortReceiveMulticastFiltered 1.3.6.1.4.1.43.7.1.21.2.1.22
The number of frames discarded by this port due to user defined receive multicast path filters.
OBJECT-TYPE    
  Counter  

lbBridgePortTransmitUnicastFiltered 1.3.6.1.4.1.43.7.1.21.2.1.23
The number of frames discarded by this port due to user defined transmit path filters.
OBJECT-TYPE    
  Counter  

lbBridgePortTransmitMulticastFiltered 1.3.6.1.4.1.43.7.1.21.2.1.24
The number of frames discarded by this port due to user defined transmit multicast path filters.
OBJECT-TYPE    
  Counter  

lbBridgePortReceiveMulticastLimitExceededCount 1.3.6.1.4.1.43.7.1.21.2.1.25
The number of times the lbBridgePortReceiveMulticastLimit was exceeded.
OBJECT-TYPE    
  Counter  

lbBridgePortForwardedToTable 1.3.6.1.4.1.43.7.1.21.3
A list of port forwarding count information.
OBJECT-TYPE    
  SEQUENCE OF  
    LbBridgePortForwardedToEntry

lbBridgePortForwardedToEntry 1.3.6.1.4.1.43.7.1.21.3.1
A bridge port forwarded-to entry contains information on the count of frames forwarded from the receiving port indicated by the corresponding lbBridgePortForwardedToReceivePortIndex, to the destination port indicated by the corresponding lbBridgePortForwardedToDstPortIndex. Note that no entries exist which are indexed with the same values for both the lbBridgePortForwardedToReceivePortIndex and the lbBridgePortForwardedToDstPortIndex objects.
OBJECT-TYPE    
  LbBridgePortForwardedToEntry  

lbBridgePortForwardedToBridgeIndex 1.3.6.1.4.1.43.7.1.21.3.1.1
A unique value for each bridge function in the system. It's value ranges between 1 and the value of lbSystemBridgeFunctionCount.
OBJECT-TYPE    
  INTEGER  

lbBridgePortForwardedToReceivePortIndex 1.3.6.1.4.1.43.7.1.21.3.1.2
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references. This port index refers to the receiving port which is forwarding frames.
OBJECT-TYPE    
  INTEGER  

lbBridgePortForwardedToDstPortIndex 1.3.6.1.4.1.43.7.1.21.3.1.3
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references. This port index refers to the destination port to which frames are being forwarded.
OBJECT-TYPE    
  INTEGER  

lbBridgePortForwardedToCount 1.3.6.1.4.1.43.7.1.21.3.1.4
The count of frames forwarded from the receiving port to the destination port.
OBJECT-TYPE    
  Counter  

lbBridgePortFilteredToTable 1.3.6.1.4.1.43.7.1.21.4
A list of port filtering count information.
OBJECT-TYPE    
  SEQUENCE OF  
    LbBridgePortFilteredToEntry

lbBridgePortFilteredToEntry 1.3.6.1.4.1.43.7.1.21.4.1
A bridge port filtered-to entry contains information on the count of frames filtered from the receiving port indicated by the corresponding lbBridgePortFilteredToReceivePortIndex, to the destination port indicated by the corresponding lbBridgePortFilteredToDstPortIndex. Note that no entries exist which are indexed with the same values for both the lbBridgePortFilteredToReceivePortIndex and the lbBridgePortFilteredToDstPortIndex objects.
OBJECT-TYPE    
  LbBridgePortFilteredToEntry  

lbBridgePortFilteredToBridgeIndex 1.3.6.1.4.1.43.7.1.21.4.1.1
A unique value for each bridge function in the system. It's value ranges between 1 and the value of lbSystemBridgeFunctionCount.
OBJECT-TYPE    
  INTEGER  

lbBridgePortFilteredToReceivePortIndex 1.3.6.1.4.1.43.7.1.21.4.1.2
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references. This port index refers to the receiving port which is filtering frames.
OBJECT-TYPE    
  INTEGER  

lbBridgePortFilteredToDstPortIndex 1.3.6.1.4.1.43.7.1.21.4.1.3
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references. This port index refers to the destination port to which frames are being filtered.
OBJECT-TYPE    
  INTEGER  

lbBridgePortFilteredToCount 1.3.6.1.4.1.43.7.1.21.4.1.4
The count of frames filtered from the receiving port to the destination port.
OBJECT-TYPE    
  Counter  

lbBridgePortAddressTable 1.3.6.1.4.1.43.7.1.21.5
A list of bridge port address entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LbBridgePortAddressEntry

lbBridgePortAddressEntry 1.3.6.1.4.1.43.7.1.21.5.1
An bridge port address entry contains information about particular bridge port address in a given system.
OBJECT-TYPE    
  LbBridgePortAddressEntry  

lbBridgePortAddressBridgeIndex 1.3.6.1.4.1.43.7.1.21.5.1.1
A unique value for each bridge function in the system. It's value ranges between 1 and the value of lbSystemBridgeFunctionCount.
OBJECT-TYPE    
  INTEGER  

lbBridgePortAddressPortIndex 1.3.6.1.4.1.43.7.1.21.5.1.2
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references.
OBJECT-TYPE    
  INTEGER  

lbBridgePortAddressIndex 1.3.6.1.4.1.43.7.1.21.5.1.3
The index of this address entry within the bridge address table.
OBJECT-TYPE    
  INTEGER  

lbBridgePortAddressRemoteAddress 1.3.6.1.4.1.43.7.1.21.5.1.4
The remote MAC address detected on the port corresponding to this entry. Setting this object attempts to create a new entry in the table. Since the value of lbBridgePortAddressIndex is determined automatically internal to the bridge, a set is only successful if the index value specified for lbBridgePortAddressIndex is zero. A get-next using the values of lbBridgePortAddressBridgeIndex and lbBridgePortAddressPortIndex can be used to determine the address index assigned to the newly added address entry.
OBJECT-TYPE    
  STRING Size(6)  

lbBridgePortAddressType 1.3.6.1.4.1.43.7.1.21.5.1.5
This object, when read, always returns the value other (1). Setting this object to invalid (2) will remove the corresponding address entry from the table.
OBJECT-TYPE    
  INTEGER other(1), invalid(2)  

lbBridgePortAddressIsStatic 1.3.6.1.4.1.43.7.1.21.5.1.6
A value indicating whether this MAC address was statically configured or was dynamically learned.
OBJECT-TYPE    
  INTEGER isStatic(1), isDynamic(2)  

lbBridgePortAddressStaticPort 1.3.6.1.4.1.43.7.1.21.5.1.7
If the object lbBridgePortAddressIsStatic has value isStatic(1), this object indicates the local port index (as reported by lbBridgePortLocalIndex) for which this MAC address was statically configured. If the object lbBridgePortAddressIsStatic has the value isDynamic(2), the value of this object is 0.
OBJECT-TYPE    
  INTEGER  

lbBridgePortAddressAge 1.3.6.1.4.1.43.7.1.21.5.1.8
This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the port corresponding to this entry.
OBJECT-TYPE    
  INTEGER  

lbTrapEnterpriseTable 1.3.6.1.4.1.43.7.1.22.1
This table contains a listing of enterprises under which various traps are defined. In all cases except for the MIB-II generic traps, the enterprise under which a trap is defined is the same as that appearing in the ENTERPRISE portion of the trap. Associated with each trap enterprise is a trap enterprise index.
OBJECT-TYPE    
  SEQUENCE OF  
    LbTrapEnterpriseTableEntry

lbTrapEnterpriseTableEntry 1.3.6.1.4.1.43.7.1.22.1.1
Information relating a specific trap enterprise OID with a trap enterprise index.
OBJECT-TYPE    
  LbTrapEnterpriseTableEntry  

lbTrapEnterpriseIndex 1.3.6.1.4.1.43.7.1.22.1.1.1
A unique index corresponding to a particular enterprise OID under which traps are defined. This value of this object corresponding to a particular enterprise OID will remain constant accross system resets.
OBJECT-TYPE    
  INTEGER  

lbTrapEnterpriseOID 1.3.6.1.4.1.43.7.1.22.1.1.2
An enterpise OID under which traps are defined.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

lbTrapDestTable 1.3.6.1.4.1.43.7.1.23.1
This table contains information specifying which traps will be transmitted by the LANplex to a given destination address. The table is indexed by the destination address, the index of the enterprise which generates the trap, and the trap number. Each entry in the table with a status of valid identifies a trap which, when generated, will be transmitted to the corresponding destination address listed in that entry.
OBJECT-TYPE    
  SEQUENCE OF  
    LbTrapDestTableEntry

lbTrapDestTableEntry 1.3.6.1.4.1.43.7.1.23.1.1
Information relating a trap with a destination address to which the trap will be sent when it is generated.
OBJECT-TYPE    
  LbTrapDestTableEntry  

lbTrapDestAddr 1.3.6.1.4.1.43.7.1.23.1.1.1
The network address to which the trap identified by this entry is to be transmitted.
OBJECT-TYPE    
  NetworkAddress  

lbTrapDestEnterpriseIndex 1.3.6.1.4.1.43.7.1.23.1.1.2
The enterprise index of the enterprise identified in this entry. The value of this object is the same as the lbTrapEnterpriseIndex value for a given enterprise.
OBJECT-TYPE    
  INTEGER  

lbTrapNumber 1.3.6.1.4.1.43.7.1.23.1.1.3
The number of the trap within the corresponding enterprise for this entry.
OBJECT-TYPE    
  INTEGER  

lbTrapEntryStatus 1.3.6.1.4.1.43.7.1.23.1.1.4
The status of the trap destination table entry. Setting this object to valid has the effect of attempting to add the row corresponding to the instance specified. If the instance already exists, the set is successful (with no new entry added). If the instance specified is invalid, the set fails, otherwise the set succeeds and results in a new entry being added to the table. Setting this object to invalid has the effect of removing the corresponding entry from the table.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)