LANTRONIX-SLC-MIB

File: LANTRONIX-SLC-MIB.mib (273696 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IPV6-TC
LANTRONIX-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Unsigned32 IpAddress NOTIFICATION-TYPE
TimeTicks TEXTUAL-CONVENTION MacAddress
Ipv6Address products

Defined Types

EnabledState  
The enabled/disabled state of an SLC feature.
TEXTUAL-CONVENTION    
  INTEGER disabled(1), enabled(2)  

AuthOrder  
Authentication order for a remote authentication method. If the authentication method is disabled, AuthOrder = 0.
TEXTUAL-CONVENTION    
  Integer32 0..6  

SyslogLevel  
Syslog logging levels
TEXTUAL-CONVENTION    
  INTEGER off(1), info(2), warning(3), error(4), debug(5)  

UserGroup  
The group assigned to a user. Each group has a set of user rights associated with it.
TEXTUAL-CONVENTION    
  INTEGER default(1), power(2), administrators(3), custom(4)  

UserRights  
The rights assigned to a user. Each group has a set of user rights associated with it. The string is a comma-separated list of rights: ad - full administrative rights do - Device Ports operations dp - configure Device Ports dr - Diagnostics and Reports dt - configure Date and Time fc - manage Firmware and Configurations lu - configure Local Users md - configure Internal Modem nt - configure Networking pc - configure PC Card ra - configure Remote Authentication rp - manage Remote Power Managers rs - Reboot or Shutdown the SLC sd - manage SD Card sk - configure SSH Keys sn - configure Secure Ltx Network sv - configure Services ub - configure USB Devices um - configure User Menus wb - Web Access
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..255)  

TimeoutDataDirection  
The direction of data used to determine if a connection has timed out.
TEXTUAL-CONVENTION    
  INTEGER incomingNetwork(1), outgoingNetwork(2), bothDirections(3)  

RPMTowerIndex  
The unique identifier for an RPM tower or unit.
TEXTUAL-CONVENTION    
  Integer32 1..2  

RPMOutletIndex  
The unique identifier for an RPM outlet.
TEXTUAL-CONVENTION    
  Integer32 1..60  

SlcNetEthIfEntry  
SEQUENCE    
  slcNetEthIfIndex Integer32
  slcNetEthIfSource INTEGER
  slcNetEthIfMode INTEGER
  slcNetEthIfIPv6Addr Ipv6Address
  slcNetEthIfIPv6PrefixLength INTEGER
  slcNetEthIfMTU Integer32
  slcNetEthIfMacAddress MacAddress

SlcNetFirewallRulesetEntry  
SEQUENCE    
  slcNetFirewallRulesetIndex Integer32
  slcNetFirewallRulesetName OCTET STRING
  slcNetFirewallRulesetNumRules Integer32
  slcNetFirewallRulesetRules OCTET STRING

SlcNetFirewallMappingEntry  
SEQUENCE    
  slcNetFirewallMappingIndex Integer32
  slcNetFirewallMappingIfac INTEGER
  slcNetFirewallMappingIfacId Integer32
  slcNetFirewallMappingRuleset OCTET STRING

SlcNetRouteStaticEntry  
SEQUENCE    
  slcNetRouteStaticIndex Integer32
  slcNetRouteStaticIP IpAddress
  slcNetRouteStaticMask IpAddress
  slcNetRouteStaticGateway IpAddress

SlcServNFSMountEntry  
SEQUENCE    
  slcServNFSMountIndex Integer32
  slcServNFSMountRemoteDir OCTET STRING
  slcServNFSMountLocalDir OCTET STRING
  slcServNFSMountReadWrite EnabledState
  slcServNFSMountMount EnabledState

SlcServSLCNetEntry  
SEQUENCE    
  slcServSLCNetIndex Integer32
  slcServSLCNetIP IpAddress

SlcServHostListEntry  
SEQUENCE    
  slcServHostListIndex Integer32
  slcServHostListName OCTET STRING
  slcServHostListRetryCount Integer32
  slcServHostListAuth EnabledState
  slcServHostListNumHosts Integer32
  slcServHostListHosts OCTET STRING

SlcServSiteEntry  
SEQUENCE    
  slcServSiteIndex Integer32
  slcServSiteName OCTET STRING
  slcServSitePort INTEGER
  slcServSitePortId Integer32
  slcServSiteLoginHost OCTET STRING
  slcServSiteCHAPSecret OCTET STRING
  slcServSiteTimeout Integer32
  slcServSiteLocalIP IpAddress
  slcServSiteRemoteIP IpAddress
  slcServSiteStaticRouteIP IpAddress
  slcServSiteStaticRouteMask IpAddress
  slcServSiteStaticRouteGateway IpAddress
  slcServSiteDialoutNum OCTET STRING
  slcServSiteDialoutLogin OCTET STRING
  slcServSiteDialback EnabledState
  slcServSiteDialbackNum OCTET STRING
  slcServSiteDialbackDelay Integer32
  slcServSiteIdleTimeout Integer32
  slcServSiteRestartDelay Integer32
  slcServSiteCBCPServerAllowNoCallback EnabledState
  slcServSiteNATState EnabledState
  slcServSiteDialbackRetries Integer32

SlcAuthLocalUserEntry  
SEQUENCE    
  slcAuthLocalUserIndex Integer32
  slcAuthLocalUserLogin OCTET STRING
  slcAuthLocalUserUID Unsigned32
  slcAuthLocalUserListenPorts OCTET STRING
  slcAuthLocalUserDataPorts OCTET STRING
  slcAuthLocalUserClearPorts OCTET STRING
  slcAuthLocalUserEscapeSeq OCTET STRING
  slcAuthLocalUserBreakSeq OCTET STRING
  slcAuthLocalUserMenu OCTET STRING
  slcAuthLocalUserDialback EnabledState
  slcAuthLocalUserDialbackNum OCTET STRING
  slcAuthLocalUserGroup UserGroup
  slcAuthLocalUserRights UserRights
  slcAuthLocalUserPwdExpires EnabledState
  slcAuthLocalUserChangePwd EnabledState
  slcAuthLocalUserChangePwdNextLogin EnabledState

SlcAuthRADIUSServerEntry  
SEQUENCE    
  slcAuthRADIUSServerIndex Integer32
  slcAuthRADIUSServer IpAddress
  slcAuthRADIUSPort Integer32
  slcAuthRADIUSServerIPv6 Ipv6Address

SlcAuthRemoteUserEntry  
SEQUENCE    
  slcAuthRemoteUserIndex Integer32
  slcAuthRemoteUserLogin OCTET STRING
  slcAuthRemoteUserGroup UserGroup
  slcAuthRemoteUserRights UserRights
  slcAuthRemoteUserListenPorts OCTET STRING
  slcAuthRemoteUserDataPorts OCTET STRING
  slcAuthRemoteUserClearPorts OCTET STRING
  slcAuthRemoteUserEscapeSeq OCTET STRING
  slcAuthRemoteUserBreakSeq OCTET STRING
  slcAuthRemoteUserMenu OCTET STRING
  slcAuthRemoteUserLocked EnabledState
  slcAuthRemoteUserDialback EnabledState
  slcAuthRemoteUserDialbackNum OCTET STRING

SlcAuthGroupEntry  
SEQUENCE    
  slcAuthGroupIndex Integer32
  slcAuthGroupName OCTET STRING
  slcAuthGroupRights UserRights
  slcAuthGroupListenPorts OCTET STRING
  slcAuthGroupDataPorts OCTET STRING
  slcAuthGroupClearPorts OCTET STRING
  slcAuthGroupEscapeSeq OCTET STRING
  slcAuthGroupBreakSeq OCTET STRING
  slcAuthGroupMenu OCTET STRING
  slcAuthGroupDialback EnabledState
  slcAuthGroupDialbackNum OCTET STRING

SlcDevPortCfgEntry  
SEQUENCE    
  slcDevPortId Integer32
  slcDevPortCfgName OCTET STRING
  slcDevPortCfgDevice INTEGER
  slcDevPortCfgDevLogin OCTET STRING
  slcDevPortCfgBreakSeq OCTET STRING
  slcDevPortCfgTelnetState EnabledState
  slcDevPortCfgTelnetPort Integer32
  slcDevPortCfgTelnetAuth EnabledState
  slcDevPortCfgSSHState EnabledState
  slcDevPortCfgSSHPort Integer32
  slcDevPortCfgSSHAuth EnabledState
  slcDevPortCfgTCPState EnabledState
  slcDevPortCfgTCPPort Integer32
  slcDevPortCfgTCPAuth EnabledState
  slcDevPortCfgIP IpAddress
  slcDevPortCfgBaud Integer32
  slcDevPortCfgDataBits Integer32
  slcDevPortCfgStopBits Integer32
  slcDevPortCfgParity INTEGER
  slcDevPortCfgFlowControl INTEGER
  slcDevPortCfgLogins EnabledState
  slcDevPortCfgConnectDSR EnabledState
  slcDevPortCfgDisconnectDSR EnabledState
  slcDevPortCfgModemState INTEGER
  slcDevPortCfgModemMode INTEGER
  slcDevPortCfgLocalIP IpAddress
  slcDevPortCfgRemoteIP IpAddress
  slcDevPortCfgAuth INTEGER
  slcDevPortCfgCHAPHost OCTET STRING
  slcDevPortCfgInitScript OCTET STRING
  slcDevPortCfgTimeout Integer32
  slcDevPortCfgDialoutNum OCTET STRING
  slcDevPortCfgDialoutLogin OCTET STRING
  slcDevPortCfgDialbackMode INTEGER
  slcDevPortCfgDialbackNum OCTET STRING
  slcDevPortCfgNATState EnabledState
  slcDevPortCfgLocalState EnabledState
  slcDevPortCfgNFSFileState EnabledState
  slcDevPortCfgNFSDir OCTET STRING
  slcDevPortCfgNFSMaxFiles Integer32
  slcDevPortCfgNFSMaxSize Integer32
  slcDevPortCfgEmailState EnabledState
  slcDevPortCfgEmailTrigger INTEGER
  slcDevPortCfgEmailByteThresh Integer32
  slcDevPortCfgEmailDelay Integer32
  slcDevPortCfgEmailRestartDelay Integer32
  slcDevPortCfgEmailTextString OCTET STRING
  slcDevPortCfgEmailTo OCTET STRING
  slcDevPortCfgEmailSubject OCTET STRING
  slcDevPortCfgPCCardState EnabledState
  slcDevPortCfgPCCardLogTo INTEGER
  slcDevPortCfgPCCardMaxFiles Integer32
  slcDevPortCfgPCCardMaxSize Integer32
  slcDevPortCfgAction INTEGER
  slcDevPortCfgEmailSend INTEGER
  slcDevPortCfgBanner OCTET STRING
  slcDevPortCfgIdleTimeout Integer32
  slcDevPortCfgRestartDelay Integer32
  slcDevPortCfgCallerIdLogging EnabledState
  slcDevPortCfgCallerIdATCmd OCTET STRING
  slcDevPortCfgDODAuth INTEGER
  slcDevPortCfgDODCHAPHost OCTET STRING
  slcDevPortCfgSLMLoggingState EnabledState
  slcDevPortCfgSLMNMS OCTET STRING
  slcDevPortCfgSLMByteThresh Integer32
  slcDevPortCfgSLMTimeFrame Integer32
  slcDevPortCfgWebColumns Integer32
  slcDevPortCfgWebRows Integer32
  slcDevPortCfgSyslogState EnabledState
  slcDevPortCfgHostList OCTET STRING
  slcDevPortCfgDevLowTemp Integer32
  slcDevPortCfgDevHighTemp Integer32
  slcDevPortCfgDevTemperature OCTET STRING
  slcDevPortCfgDevLowHumidity Integer32
  slcDevPortCfgDevHighHumidity Integer32
  slcDevPortCfgDevHumidity OCTET STRING
  slcDevPortCfgDevTraps EnabledState
  slcDevPortCfgShowLines EnabledState
  slcDevPortCfgNumberShowLines Integer32
  slcDevPortCfgViewPortLog EnabledState
  slcDevPortCfgPortLogSeq OCTET STRING
  slcDevPortCfgMaxDirectConnects Integer32
  slcDevPortCfgTelnetTimeout Integer32
  slcDevPortCfgSSHTimeout Integer32
  slcDevPortCfgTCPTimeout Integer32
  slcDevPortCfgCBCPClientType INTEGER
  slcDevPortCfgCBCPServerAllowNoCallback EnabledState
  slcDevPortCfgDialbackDelay Integer32
  slcDevPortCfgUSBState EnabledState
  slcDevPortCfgUSBLogTo Integer32
  slcDevPortCfgUSBMaxFiles Integer32
  slcDevPortCfgUSBMaxSize Integer32
  slcDevPortCfgCHAPAuthLocalUsers EnabledState
  slcDevPortCfgUseSites EnabledState
  slcDevPortCfgDialbackRetries Integer32
  slcDevPortCfgGroup OCTET STRING
  slcDevPortCfgIPMask IpAddress
  slcDevPortCfgDevPrompt OCTET STRING
  slcDevPortCfgDevNumOutlets Integer32
  slcDevPortCfgDevNumExpOutlets Integer32
  slcDevPortCfgReversePinout EnabledState
  slcDevPortCfgUSBVBUS EnabledState
  slcDevPortCfgAssertDTR EnabledState
  slcDevPortCfgPortType INTEGER
  slcDevPortCfgTelnetTimeoutDataDirection TimeoutDataDirection
  slcDevPortCfgSSHTimeoutDataDirection TimeoutDataDirection
  slcDevPortCfgTCPTimeoutDataDirection TimeoutDataDirection
  slcDevPortCfgIdleTimeoutMessage EnabledState
  slcDevPortCfgNumberOfSessionsMessage EnabledState
  slcDevPortCfgMinimizeLatency EnabledState
  slcDevPortCfgTelnetSoftIAC EnabledState
  slcDevPortCfgSendTermString EnabledState
  slcDevPortCfgTerminationString OCTET STRING
  slcDevPortCfgPowerManagementSeq OCTET STRING
  slcDevPortCfgPowerSupplies OCTET STRING
  slcDevPortCfgToggleDTR EnabledState
  slcDevPortCfgTokenAction OCTET STRING
  slcDevPortCfgTokenSendString OCTET STRING
  slcDevPortCfgTokenPowerSupply OCTET STRING
  slcDevPortCfgTokenPowerAction INTEGER

SlcDevPortStateEntry  
SEQUENCE    
  slcDevPortStateIndex Integer32
  slcDevPortStateBytesInput Integer32
  slcDevPortStateBytesOutput Integer32
  slcDevPortStateFramingErrors Integer32
  slcDevPortStateParityErrors Integer32
  slcDevPortStateOverrunErrors Integer32
  slcDevPortStateFlowControlViolations Integer32
  slcDevPortStateDSR EnabledState
  slcDevPortStateDTR EnabledState
  slcDevPortStateCTS EnabledState
  slcDevPortStateRTS EnabledState
  slcDevPortStateCD EnabledState

SlcPCCardCfgEntry  
SEQUENCE    
  slcPCCardCfgIndex Integer32
  slcPCCardCfgCardType INTEGER
  slcPCCardCfgCardId OCTET STRING
  slcPCCardCfgBaud Integer32
  slcPCCardCfgDataBits Integer32
  slcPCCardCfgStopBits Integer32
  slcPCCardCfgParity INTEGER
  slcPCCardCfgFlowControl INTEGER
  slcPCCardCfgModemState INTEGER
  slcPCCardCfgModemMode INTEGER
  slcPCCardCfgLocalIP IpAddress
  slcPCCardCfgRemoteIP IpAddress
  slcPCCardCfgAuth INTEGER
  slcPCCardCfgCHAPHost OCTET STRING
  slcPCCardCfgInitScript OCTET STRING
  slcPCCardCfgTimeout Integer32
  slcPCCardCfgDialoutNum OCTET STRING
  slcPCCardCfgDialoutLogin OCTET STRING
  slcPCCardCfgDialbackMode INTEGER
  slcPCCardCfgDialbackNum OCTET STRING
  slcPCCardCfgNATState EnabledState
  slcPCCardCfgStorageFS INTEGER
  slcPCCardCfgISDNChannel Integer32
  slcPCCardCfgISDNChannelNum OCTET STRING
  slcPCCardCfgTelnetState EnabledState
  slcPCCardCfgTelnetPort Integer32
  slcPCCardCfgTelnetAuth EnabledState
  slcPCCardCfgSSHState EnabledState
  slcPCCardCfgSSHPort Integer32
  slcPCCardCfgSSHAuth EnabledState
  slcPCCardCfgTCPState EnabledState
  slcPCCardCfgTCPPort Integer32
  slcPCCardCfgTCPAuth EnabledState
  slcPCCardCfgGSMPIN OCTET STRING
  slcPCCardCfgGSMNetworkName OCTET STRING
  slcPCCardCfgGSMPPPCompression EnabledState
  slcPCCardCfgGSMAutoAcquireDNS EnabledState
  slcPCCardCfgGSMDialoutMode INTEGER
  slcPCCardCfgGSMContextID OCTET STRING
  slcPCCardCfgGSMBearerService OCTET STRING
  slcPCCardCfgIdleTimeout Integer32
  slcPCCardCfgRestartDelay Integer32
  slcPCCardCfgCallerIdLogging EnabledState
  slcPCCardCfgCallerIdATCmd OCTET STRING
  slcPCCardCfgDODAuth INTEGER
  slcPCCardCfgDODCHAPHost OCTET STRING
  slcPCCardCfgHostList OCTET STRING
  slcPCCardCfgCBCPClientType INTEGER
  slcPCCardCfgCBCPServerAllowNoCallback EnabledState
  slcPCCardCfgDialbackDelay Integer32
  slcPCCardCfgCHAPAuthLocalUsers EnabledState
  slcPCCardCfgUseSites EnabledState
  slcPCCardCfgDialbackRetries Integer32
  slcPCCardCfgGroup OCTET STRING

SlcDevUSBCfgEntry  
SEQUENCE    
  slcDevUSBId Integer32
  slcDevUSBCfgCardType INTEGER
  slcDevUSBCfgCardId OCTET STRING
  slcDevUSBCfgStorageFS INTEGER
  slcDevUSBCfgBaud Integer32
  slcDevUSBCfgDataBits Integer32
  slcDevUSBCfgStopBits Integer32
  slcDevUSBCfgParity INTEGER
  slcDevUSBCfgFlowControl INTEGER
  slcDevUSBCfgModemState INTEGER
  slcDevUSBCfgModemMode INTEGER
  slcDevUSBCfgLocalIP IpAddress
  slcDevUSBCfgRemoteIP IpAddress
  slcDevUSBCfgAuth INTEGER
  slcDevUSBCfgCHAPHost OCTET STRING
  slcDevUSBCfgDODAuth INTEGER
  slcDevUSBCfgDODCHAPHost OCTET STRING
  slcDevUSBCfgInitScript OCTET STRING
  slcDevUSBCfgTimeout Integer32
  slcDevUSBCfgDialoutNum OCTET STRING
  slcDevUSBCfgDialoutLogin OCTET STRING
  slcDevUSBCfgDialbackMode INTEGER
  slcDevUSBCfgDialbackNum OCTET STRING
  slcDevUSBCfgDialbackDelay Integer32
  slcDevUSBCfgNATState EnabledState
  slcDevUSBCfgIdleTimeout Integer32
  slcDevUSBCfgRestartDelay Integer32
  slcDevUSBCfgCallerIdLogging EnabledState
  slcDevUSBCfgCallerIdATCmd OCTET STRING
  slcDevUSBCfgHostList OCTET STRING
  slcDevUSBCfgCBCPClientType INTEGER
  slcDevUSBCfgCBCPServerAllowNoCallback EnabledState
  slcDevUSBCfgTelnetState EnabledState
  slcDevUSBCfgTelnetPort Integer32
  slcDevUSBCfgTelnetAuth EnabledState
  slcDevUSBCfgSSHState EnabledState
  slcDevUSBCfgSSHPort Integer32
  slcDevUSBCfgSSHAuth EnabledState
  slcDevUSBCfgTCPState EnabledState
  slcDevUSBCfgTCPPort Integer32
  slcDevUSBCfgTCPAuth EnabledState
  slcDevUSBCfgGSMPIN OCTET STRING
  slcDevUSBCfgGSMPPPCompression EnabledState
  slcDevUSBCfgGSMAutoAcquireDNS EnabledState
  slcDevUSBCfgGSMDialoutMode INTEGER
  slcDevUSBCfgGSMContextID OCTET STRING
  slcDevUSBCfgGSMBearerService OCTET STRING
  slcDevUSBCfgCHAPAuthLocalUsers EnabledState
  slcDevUSBCfgUseSites EnabledState
  slcDevUSBCfgDialbackRetries Integer32
  slcDevUSBCfgDialtoneCheck Integer32
  slcDevUSBCfgGroup OCTET STRING

SlcDevRPMCfgEntry  
SEQUENCE    
  slcDevRPMId Integer32
  slcDevRPMName OCTET STRING
  slcDevRPMVendorModel OCTET STRING
  slcDevRPMManagedVia INTEGER
  slcDevRPMIPAddress IpAddress
  slcDevRPMPort Integer32
  slcDevRPMDriverOpts OCTET STRING
  slcDevRPMStatus OCTET STRING
  slcDevRPMFirmwareVersion OCTET STRING
  slcDevRPMSerialNumber OCTET STRING
  slcDevRPMMACAddress OCTET STRING
  slcDevRPMNumOutlets Integer32
  slcDevRPMOutletsOn Integer32
  slcDevRPMSNMPReadComm OCTET STRING
  slcDevRPMAdminLogin OCTET STRING
  slcDevRPMLogStatus Integer32
  slcDevRPMCriticalSNMPTraps EnabledState
  slcDevRPMCriticalEmails OCTET STRING
  slcDevRPMProvidesSLCPower EnabledState
  slcDevRPMOnLowBattery INTEGER
  slcDevRPMShutdownOrder Integer32
  slcDevRPMLoad Integer32
  slcDevRPMLoadOverThreshold Integer32
  slcDevRPMBatteryCharge Integer32
  slcDevRPMBatteryRuntime TimeTicks
  slcDevRPMBeeperStatus EnabledState
  slcDevRPMTemperature Integer32
  slcDevRPMUptime TimeTicks

SlcDevRPMStatusEntry  
SEQUENCE    
  slcDevRPMCurrent Integer32
  slcDevRPMInputVoltage Integer32
  slcDevRPMApparentPower Integer32
  slcDevRPMNominalApparentPower Integer32
  slcDevRPMRealPower Integer32
  slcDevRPMNominalRealPower Integer32

SlcDevRPMOutletEntry  
SEQUENCE    
  slcDevRPMOutletName OCTET STRING
  slcDevRPMOutletState INTEGER
  slcDevRPMOutletCurrent Integer32
  slcDevRPMOutletAction INTEGER

SlcConnEntry  
SEQUENCE    
  slcConnIndex Integer32
  slcConnEndPt1 OCTET STRING
  slcConnEndPt2 OCTET STRING
  slcConnFlow INTEGER
  slcConnUser OCTET STRING
  slcConnDuration Integer32
  slcConnDurationStr OCTET STRING
  slcConnIdle Integer32
  slcConnIdleStr OCTET STRING
  slcConnSourceIP IpAddress

Defined Values

slc 1.3.6.1.4.1.244.1.1
MIB module for managing Lantronix Secure Console Managers and Advanced Console Managers
MODULE-IDENTITY    

slcNetwork 1.3.6.1.4.1.244.1.1.1
OBJECT IDENTIFIER    

slcServices 1.3.6.1.4.1.244.1.1.2
OBJECT IDENTIFIER    

slcAuth 1.3.6.1.4.1.244.1.1.3
OBJECT IDENTIFIER    

slcDevices 1.3.6.1.4.1.244.1.1.4
OBJECT IDENTIFIER    

slcConnections 1.3.6.1.4.1.244.1.1.5
OBJECT IDENTIFIER    

slcSystem 1.3.6.1.4.1.244.1.1.6
OBJECT IDENTIFIER    

slcNetEth 1.3.6.1.4.1.244.1.1.1.1
OBJECT IDENTIFIER    

slcNetEthIfNumber 1.3.6.1.4.1.244.1.1.1.1.1
The number of entries in the Ethernet interface table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2  

slcNetEthIfTable 1.3.6.1.4.1.244.1.1.1.1.2
Table of Ethernet network entries. The number of entries is given by the value of slcNetEthIfNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcNetEthIfEntry

slcNetEthIfEntry 1.3.6.1.4.1.244.1.1.1.1.2.1
An entry with the attributes for each Ethernet interface. Ethernet Port Eth1 is always index 1, and Eth2 is always index 2.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcNetEthIfEntry  

slcNetEthIfIndex 1.3.6.1.4.1.244.1.1.1.1.2.1.1
Reference index for each Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2  

slcNetEthIfSource 1.3.6.1.4.1.244.1.1.1.1.2.1.2
The state/source for the IP Address and subnet mask for the Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), dhcp(2), bootp(3), static(4)  

slcNetEthIfMode 1.3.6.1.4.1.244.1.1.1.1.2.1.3
The speed and duplex for the Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER autoNegotiate(1), halfDuplex10mbit(2), fullDuplex10mbit(3), halfDuplex100mbit(4), fullDuplex100mbit(5), halfDuplex1000mbit(6), fullDuplex1000mbit(7)  

slcNetEthIfIPv6Addr 1.3.6.1.4.1.244.1.1.1.1.2.1.4
The IPv6 Address for each Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcNetEthIfIPv6PrefixLength 1.3.6.1.4.1.244.1.1.1.1.2.1.5
The length of the prefix for slcNetEthIfIPv6Addr (in bits).
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..128  

slcNetEthIfMTU 1.3.6.1.4.1.244.1.1.1.1.2.1.6
The Maximum Transmission Unit for the Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcNetEthIfMacAddress 1.3.6.1.4.1.244.1.1.1.1.2.1.7
The MAC Address for the Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

slcNetEthGateway 1.3.6.1.4.1.244.1.1.1.1.3
The gateway for routing non-Eth1 and non-Eth2 network IPv4 traffic.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcNetEthGatewayPrecedence 1.3.6.1.4.1.244.1.1.1.1.4
The gateway to give precedence to, if both a static gateway is set, and a gateway is acquired via DHCP or a GPRS Modem.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dhcp(1), default(2), gprs(3)  

slcNetEthKeepaliveStartProbes 1.3.6.1.4.1.244.1.1.1.1.5
TCP keepalive timer: number of seconds to wait before sending out the initial probe.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..99999  

slcNetEthKeepaliveNumberOfProbes 1.3.6.1.4.1.244.1.1.1.1.6
TCP keepalive timer: number of probes to send out after the initial probe.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..20  

slcNetEthKeepaliveInterval 1.3.6.1.4.1.244.1.1.1.1.7
TCP keepalive timer: number of seconds between probes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..9999  

slcNetEthIPForwarding 1.3.6.1.4.1.244.1.1.1.1.8
If enabled, IP forwarding is used.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcNetEthDNS1 1.3.6.1.4.1.244.1.1.1.1.9
The IPv4 Address of DNS server #1.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcNetEthDNS2 1.3.6.1.4.1.244.1.1.1.1.10
The IPv4 Address of DNS server #2.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcNetEthDNS3 1.3.6.1.4.1.244.1.1.1.1.11
The IPv4 Address of DNS server #3.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcNetEthDomain 1.3.6.1.4.1.244.1.1.1.1.12
The SLC domain name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcNetEthAlternateGateway 1.3.6.1.4.1.244.1.1.1.1.13
The alternate gateway for routing non-Eth1 and non-Eth2 network traffic. The alternate gateway is used if an IP Address usually accessible through the default gateway fails to return one or more pings.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcNetEthPingIPAddress 1.3.6.1.4.1.244.1.1.1.1.14
The IP Address to ping to determine if the alternate gateway should be used.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcNetEthPingInterface 1.3.6.1.4.1.244.1.1.1.1.15
The Ethernet interface used to determine if the alternate gateway should be used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ethernet1(1), ethernet2(2)  

slcNetEthPingDelay 1.3.6.1.4.1.244.1.1.1.1.16
The delay, in seconds, between pings used to determine if the alternate gateway should be used.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..250  

slcNetEthPingFailed 1.3.6.1.4.1.244.1.1.1.1.17
The number of pings with no response required for the alternate gateway to be used.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..250  

slcNetEthBonding 1.3.6.1.4.1.244.1.1.1.1.18
The Ethernet network redundancy/load balancing setting.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), activeBackup(2), aggregation(3), adaptiveLoadBalancing(4)  

slcNetEthIPv6 1.3.6.1.4.1.244.1.1.1.1.19
If enabled, IPv6 is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcNetEthGatewayIPv6 1.3.6.1.4.1.244.1.1.1.1.20
The default gateway for routing non-Eth1 and non-Eth2 IPv6 network traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcNetEthDNS1IPv6 1.3.6.1.4.1.244.1.1.1.1.21
The IPv6 Address of DNS server #1.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcNetEthDNS2IPv6 1.3.6.1.4.1.244.1.1.1.1.22
The IPv6 Address of DNS server #2.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcNetEthDNS3IPv6 1.3.6.1.4.1.244.1.1.1.1.23
The IPv6 Address of DNS server #3.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcNetEthPreferIPv4DNS 1.3.6.1.4.1.244.1.1.1.1.24
If enabled, IPv4 DNS records will be preferred when DNS hostname lookups are performed. Otherwise IPv6 records will be preferred (when IPv6 is enabled).
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcNetFirewall 1.3.6.1.4.1.244.1.1.1.2
OBJECT IDENTIFIER    

slcNetFirewallState 1.3.6.1.4.1.244.1.1.1.2.1
If enabled, network traffic is filtered.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcNetFirewallReject 1.3.6.1.4.1.244.1.1.1.2.2
If enabled, returns a 'connection denied' message on blocked ports. If disabled, ignores attempts to connect to a blocked port. This object is deprecated.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER return(1), ignore(2)  

slcNetFirewallPing 1.3.6.1.4.1.244.1.1.1.2.3
If enabled, the SLC is invisible to pings. This object is deprecated.
Status: obsolete Access: read-only
OBJECT-TYPE    
  EnabledState  

slcNetFirewallSSH 1.3.6.1.4.1.244.1.1.1.2.4
If enabled, the SSH port is open. If disabled, the SSH port is blocked to network traffic. This object is deprecated.
Status: obsolete Access: read-only
OBJECT-TYPE    
  EnabledState  

slcNetFirewallTelnet 1.3.6.1.4.1.244.1.1.1.2.5
If enabled, the Telnet port is open. If disabled, the Telnet port is blocked to network traffic. This object is deprecated.
Status: obsolete Access: read-only
OBJECT-TYPE    
  EnabledState  

slcNetFirewallHTTP 1.3.6.1.4.1.244.1.1.1.2.6
If enabled, the HTTP port is open. If disabled, the HTTP port is blocked to network traffic. This object is deprecated.
Status: obsolete Access: read-only
OBJECT-TYPE    
  EnabledState  

slcNetFirewallHTTPS 1.3.6.1.4.1.244.1.1.1.2.7
If enabled, the HTTPS port is open. If disabled, the HTTPS port is blocked to network traffic. This object is deprecated.
Status: obsolete Access: read-only
OBJECT-TYPE    
  EnabledState  

slcNetFirewallSMBCIFS 1.3.6.1.4.1.244.1.1.1.2.8
If enabled, the SMBCIFS port is open. If disabled, the SMBCIFS port is blocked to network traffic. This object is deprecated.
Status: obsolete Access: read-only
OBJECT-TYPE    
  EnabledState  

slcNetFirewallRulesetNumber 1.3.6.1.4.1.244.1.1.1.2.9
The number of entries in the IP Filter Ruleset table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..64  

slcNetFirewallRulesetTable 1.3.6.1.4.1.244.1.1.1.2.10
Table of IP Filter Rulesets. The number of entries is given by the value of slcNetFirewallRulesetNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcNetFirewallRulesetEntry

slcNetFirewallRulesetEntry 1.3.6.1.4.1.244.1.1.1.2.10.1
An entry with all the attributes, including the rules, for an IP Filter Ruleset.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcNetFirewallRulesetEntry  

slcNetFirewallRulesetIndex 1.3.6.1.4.1.244.1.1.1.2.10.1.1
Reference index for each IP Filter Ruleset.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

slcNetFirewallRulesetName 1.3.6.1.4.1.244.1.1.1.2.10.1.2
The name assigned to the IP Filter Ruleset.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcNetFirewallRulesetNumRules 1.3.6.1.4.1.244.1.1.1.2.10.1.3
The number of rules in the slcNetFirewallRulesetRules string.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..32  

slcNetFirewallRulesetRules 1.3.6.1.4.1.244.1.1.1.2.10.1.4
The IP Filter rules that are defined for the Ruleset. The rule format is /;;; and rules are separated by a colon. If the string is truncated because of system limitations, the string will be terminated with two colons.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcNetFirewallMappingNumber 1.3.6.1.4.1.244.1.1.1.2.11
The number of entries in the IP Filter Mapping table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcNetFirewallMappingTable 1.3.6.1.4.1.244.1.1.1.2.12
Table of mappings between IP Filter Rulesets and interfaces. The number of entries is given by the value of slcNetFirewallMappingNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcNetFirewallMappingEntry

slcNetFirewallMappingEntry 1.3.6.1.4.1.244.1.1.1.2.12.1
An entry defining an interface that has an IP Filter Ruleset assigned to it. The interface can be either an Ethernet interface or a PC Card or Device Port modem.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcNetFirewallMappingEntry  

slcNetFirewallMappingIndex 1.3.6.1.4.1.244.1.1.1.2.12.1.1
Reference index for each IP Filter mapping.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

slcNetFirewallMappingIfac 1.3.6.1.4.1.244.1.1.1.2.12.1.2
The interface which has an IP Filter Ruleset assigned to it. If the interface is devicePort or usbPort, slcNetFirewallMappingIfacId defines which Device Port or USB Port (with an attached modem) the Ruleset is assigned to.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ethernet1(1), ethernet2(2), upperPCCard(3), lowerPCCard(4), devicePort(5), usbPort(6), internalModem(7)  

slcNetFirewallMappingIfacId 1.3.6.1.4.1.244.1.1.1.2.12.1.3
The identifier for a Device Port if slcNetFirewallMappingIfac equals devicePort(5), or the identifier for a USB Port if slcNetFirewallMappingIfac equals usbPort. Otherwise equals zero.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..48  

slcNetFirewallMappingRuleset 1.3.6.1.4.1.244.1.1.1.2.12.1.4
The name of the IP Filter Ruleset assigned to the interface.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcNetRouting 1.3.6.1.4.1.244.1.1.1.3
OBJECT IDENTIFIER    

slcNetRouteRIPState 1.3.6.1.4.1.244.1.1.1.3.1
If enabled, the Routing Information Protocol (RIP) is used.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcNetRouteRIPVersion 1.3.6.1.4.1.244.1.1.1.3.2
The version of RIP being used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER one(1), two(2), oneAndTwo(3)  

slcNetRouteStaticState 1.3.6.1.4.1.244.1.1.1.3.3
If enabled, static routing is used.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcNetRouteStaticNumber 1.3.6.1.4.1.244.1.1.1.3.4
The number of entries in the Static Routes table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..64  

slcNetRouteStaticTable 1.3.6.1.4.1.244.1.1.1.3.5
Table of static route entries. The number of entries is given by the value of slcNetRouteStaticNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcNetRouteStaticEntry

slcNetRouteStaticEntry 1.3.6.1.4.1.244.1.1.1.3.5.1
An entry with the IP Address, subnet mask, and gateway for a static route.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcNetRouteStaticEntry  

slcNetRouteStaticIndex 1.3.6.1.4.1.244.1.1.1.3.5.1.1
Reference index for each static route.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

slcNetRouteStaticIP 1.3.6.1.4.1.244.1.1.1.3.5.1.2
The IP Address for the static route.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcNetRouteStaticMask 1.3.6.1.4.1.244.1.1.1.3.5.1.3
The subnet mask for the static route.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcNetRouteStaticGateway 1.3.6.1.4.1.244.1.1.1.3.5.1.4
The gateway for the static route.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcNetVPN 1.3.6.1.4.1.244.1.1.1.4
OBJECT IDENTIFIER    

slcNetVPNTunnel 1.3.6.1.4.1.244.1.1.1.4.1
If enabled, the SLC is configured to initiate a VPN tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcNetVPNStatus 1.3.6.1.4.1.244.1.1.1.4.2
A string giving the current status of the VPN tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcNetVPNName 1.3.6.1.4.1.244.1.1.1.4.3
The name of the VPN tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

slcNetVPNEthPort 1.3.6.1.4.1.244.1.1.1.4.4
The Ethernet interface used for the VPN tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ethernet1(1), ethernet2(2)  

slcNetVPNRemoteHost 1.3.6.1.4.1.244.1.1.1.4.5
The IP Address of the host on the remote side of the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcNetVPNRemoteId 1.3.6.1.4.1.244.1.1.1.4.6
How the remote host should be identified for authentication.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

slcNetVPNRemoteHop 1.3.6.1.4.1.244.1.1.1.4.7
If the remote host is behind a gateway, this specifies the IP Address of the gateway's public network interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcNetVPNRemoteSubnet 1.3.6.1.4.1.244.1.1.1.4.8
One or more subnets behind the remote host, expressed in CIDR notation (IP Address/mask bits). Multiple subnets are separated by a comma.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcNetVPNLocalId 1.3.6.1.4.1.244.1.1.1.4.9
How the SLC should be identified for authentication.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

slcNetVPNLocalHop 1.3.6.1.4.1.244.1.1.1.4.10
If the SLC is behind a gateway, this specifies the IP Address of the gateway's public network interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcNetVPNLocalSubnet 1.3.6.1.4.1.244.1.1.1.4.11
One or more subnets behind the SLC, expressed in CIDR notation (IP Address/mask bits). Multiple subnets are separated by a comma.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcNetVPNIKENegotiation 1.3.6.1.4.1.244.1.1.1.4.12
The type of mode used by the SLC and the remote host for the IKE protocol, which exchanges security options between two hosts which want to communicate via IPSec.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER main(1), aggressive(2)  

slcNetVPNIKEEncryption 1.3.6.1.4.1.244.1.1.1.4.13
The type of encryption used for IKE negotiation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(1), tripledes(2), aes(3)  

slcNetVPNIKEAuthentication 1.3.6.1.4.1.244.1.1.1.4.14
The type of authentication used for IKE negotiation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(1), sha1(2), md5(3)  

slcNetVPNIKEDHGroup 1.3.6.1.4.1.244.1.1.1.4.15
The type of Diffie-Hellman Group used for IKE negotiation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(1), dhg2(2), dhg5(3)  

slcNetVPNESPEncryption 1.3.6.1.4.1.244.1.1.1.4.16
The type of encryption used for encrypting data sent through the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(1), tripledes(2), aes(3)  

slcNetVPNESPAuthentication 1.3.6.1.4.1.244.1.1.1.4.17
The type of authentication used for authenticating data sent through the VPN tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(1), sha1(2), md5(3)  

slcNetVPNESPDHGroup 1.3.6.1.4.1.244.1.1.1.4.18
The type of Diffie-Hellman Group used for the key exchange for data sent through the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(1), dhg2(2), dhg5(3)  

slcNetVPNAuthentication 1.3.6.1.4.1.244.1.1.1.4.19
The type of authentication used by the host on each side of the tunnel to verify the identify of the other host.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER rsaPublicKey(1), preSharedKey(2)  

slcNetVPNPerfectForwardSecrecy 1.3.6.1.4.1.244.1.1.1.4.20
When a new IPSec SA is negotiated after the IPSec SA lifetime expires, a new Diffie-Hellman key exchange can be performed to generate a new session key to be used to encrypt the data being sent through the tunnel. If this is enabled, it provides greater security, since the old session keys are destroyed.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcNetVPNModeConfigClient 1.3.6.1.4.1.244.1.1.1.4.21
If this is enabled, the SLC can receive network configuration from the remote host. This allows the remote host to assign an IP address/netmask to the SLC side of the VPN tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcNetVPNXAUTHClient 1.3.6.1.4.1.244.1.1.1.4.22
If this is enabled, the SLC will send authentication credentials to the remote host if they are requested. XAUTH, or Extended Authentication, can be used as an additional security measure on top of the Pre-Shared Key or RSA Public Key.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcNetVPNXAUTHClientLogin 1.3.6.1.4.1.244.1.1.1.4.23
If slcNetVPNXAUTHClientLogin is enabled, this is the login used for authentication.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcNetSecurity 1.3.6.1.4.1.244.1.1.1.5
OBJECT IDENTIFIER    

slcNetSecurityFIPSMode 1.3.6.1.4.1.244.1.1.1.5.1
If enabled, the SLC is running in FIPS mode.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServNTP 1.3.6.1.4.1.244.1.1.2.1
OBJECT IDENTIFIER    

slcServNTPState 1.3.6.1.4.1.244.1.1.2.1.1
If enabled, NTP is used to synchronize SLC time with a network time server.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServNTPSynchronize 1.3.6.1.4.1.244.1.1.2.1.2
The method used by the SLC to synchronize time: receive broadcasts from the NTP server, or poll the NTP server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER broadcast(1), poll(2)  

slcServNTPPoll 1.3.6.1.4.1.244.1.1.2.1.3
If slcServNTPSynchronize is set to poll, indicates whether a local server or a public server is used as the NTP server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER local(1), public(2)  

slcServNTPServer 1.3.6.1.4.1.244.1.1.2.1.4
The IPv4 Address of the local or public NTP server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcServNTPLocalServer2 1.3.6.1.4.1.244.1.1.2.1.5
The IPv4 Address of the 2nd local NTP server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcServNTPLocalServer3 1.3.6.1.4.1.244.1.1.2.1.6
The IPv4 Address of the 3rd local NTP server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcServNTPServerIPv6 1.3.6.1.4.1.244.1.1.2.1.7
The IPv6 Address of the local NTP server.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcServNTPLocalServer2IPv6 1.3.6.1.4.1.244.1.1.2.1.8
The IPv6 Address of the 2nd local NTP server.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcServNTPLocalServer3IPv6 1.3.6.1.4.1.244.1.1.2.1.9
The IPv6 Address of the 3rd local NTP server.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcServSyslog 1.3.6.1.4.1.244.1.1.2.2
OBJECT IDENTIFIER    

slcServSysNetworkLevel 1.3.6.1.4.1.244.1.1.2.2.1
The logging level for Network messages.
Status: current Access: read-only
OBJECT-TYPE    
  SyslogLevel  

slcServSysServicesLevel 1.3.6.1.4.1.244.1.1.2.2.2
The logging level for Services messages.
Status: current Access: read-only
OBJECT-TYPE    
  SyslogLevel  

slcServSysAuthLevel 1.3.6.1.4.1.244.1.1.2.2.3
The logging level for Authentication messages.
Status: current Access: read-only
OBJECT-TYPE    
  SyslogLevel  

slcServSysDevPortLevel 1.3.6.1.4.1.244.1.1.2.2.4
The logging level for Device Port messages.
Status: current Access: read-only
OBJECT-TYPE    
  SyslogLevel  

slcServSysDiagLevel 1.3.6.1.4.1.244.1.1.2.2.5
The logging level for Diagnostic messages.
Status: current Access: read-only
OBJECT-TYPE    
  SyslogLevel  

slcServSysGeneralLevel 1.3.6.1.4.1.244.1.1.2.2.6
The logging level for General system messages.
Status: current Access: read-only
OBJECT-TYPE    
  SyslogLevel  

slcServSysRemoteServer 1.3.6.1.4.1.244.1.1.2.2.7
The IPv4 Address of the remote Syslog Server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcServSysRemoteServer2 1.3.6.1.4.1.244.1.1.2.2.8
The IPv4 Address of the secondary remote Syslog Server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcServSysRemoteServerIPv6 1.3.6.1.4.1.244.1.1.2.2.9
The IPv6 Address of the remote Syslog Server.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcServSysRemoteServer2IPv6 1.3.6.1.4.1.244.1.1.2.2.10
The IPv6 Address of the secondary remote Syslog Server.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcServSysRPMLogSize 1.3.6.1.4.1.244.1.1.2.2.11
The maximum size in Kilobytes that RPM logs can grow to before they are pruned. When the file is pruned, it will be pruned to 50% of the RPM Log Size.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 5..40  

slcServSysOtherLogSize 1.3.6.1.4.1.244.1.1.2.2.12
The maximum size in Kilobytes that all logs other than RPM logs can grow to before they are pruned. When the file is pruned, it will be pruned to 50% of the RPM Log Size.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 5..40  

slcServAuditLog 1.3.6.1.4.1.244.1.1.2.3
OBJECT IDENTIFIER    

slcServAuditState 1.3.6.1.4.1.244.1.1.2.3.1
If enabled, logs all configuration changes to an audit log.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServAuditSize 1.3.6.1.4.1.244.1.1.2.3.2
The maximum size of the audit login in Kilobytes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 5..500  

slcServAuditIncludeCLI 1.3.6.1.4.1.244.1.1.2.3.3
If enabled, all CLI commands are included in the audit log in addition to a description of the configuration change.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServAuditInSystemLog 1.3.6.1.4.1.244.1.1.2.3.4
If enabled, all audit log entries are also sent to the system log.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServSSH 1.3.6.1.4.1.244.1.1.2.4
OBJECT IDENTIFIER    

slcServSSHState 1.3.6.1.4.1.244.1.1.2.4.1
If enabled, allows logins to the SLC CLI via SSH.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServSSHTimeout 1.3.6.1.4.1.244.1.1.2.4.2
The timeout (in minutes) for SSH connections. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..30  

slcServSSHWebSSH 1.3.6.1.4.1.244.1.1.2.4.3
If enabled, allows Web SSH access to the CLI and the Device Ports.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServSSHPort 1.3.6.1.4.1.244.1.1.2.4.4
The TCP Port number for incoming SSH sessions to the SLC CLI.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

slcServSSHV1Incoming 1.3.6.1.4.1.244.1.1.2.4.5
If enabled, incoming SSH version 1 connections are allowed.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServSSHTimeoutDataDirection 1.3.6.1.4.1.244.1.1.2.4.6
If slcServSSHTimeout is enabled, this setting indicates the direction of data used to determine if the connection has timed out.
Status: current Access: read-only
OBJECT-TYPE    
  TimeoutDataDirection  

slcServSSHDSAKeys 1.3.6.1.4.1.244.1.1.2.4.7
If enabled, SSH will support DSA keys for incoming and outgoing connections.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServTelnet 1.3.6.1.4.1.244.1.1.2.5
OBJECT IDENTIFIER    

slcServTelnetState 1.3.6.1.4.1.244.1.1.2.5.1
If enabled, allows logins to the SLC CLI via Telnet.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServTelnetTimeout 1.3.6.1.4.1.244.1.1.2.5.2
The timeout (in minutes) for Telnet connections. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..30  

slcServTelnetWebTelnet 1.3.6.1.4.1.244.1.1.2.5.3
If enabled, allows Web Telnet access to the CLI and the Device Ports.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServTelnetTelnetOut 1.3.6.1.4.1.244.1.1.2.5.4
If enabled, allows outgoing Telnet connections.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServTelnetTimeoutDataDirection 1.3.6.1.4.1.244.1.1.2.5.5
If slcServTelnetTimeout is enabled, this setting indicates the direction of data used to determine if the connection has timed out.
Status: current Access: read-only
OBJECT-TYPE    
  TimeoutDataDirection  

slcServSNMP 1.3.6.1.4.1.244.1.1.2.6
OBJECT IDENTIFIER    

slcServSNMPState 1.3.6.1.4.1.244.1.1.2.6.1
Enables the SNMP agent on the SLC.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServSNMPTraps 1.3.6.1.4.1.244.1.1.2.6.2
If enabled, the SLC sends traps for key events.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServSNMPNMS 1.3.6.1.4.1.244.1.1.2.6.3
The IPv4 Address of the Network Management System (NMS).
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcServSNMPLocation 1.3.6.1.4.1.244.1.1.2.6.4
The SNMP location for the SLC.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcServSNMPContact 1.3.6.1.4.1.244.1.1.2.6.5
The SNMP contact for the SLC.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcServSNMPv3User 1.3.6.1.4.1.244.1.1.2.6.6
The user name for read-only access to the SLC via SNMP v3.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

slcServSNMPReadOnlyCommunity 1.3.6.1.4.1.244.1.1.2.6.7
The SNMP read-only community for SNMP versions 1 and 2.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcServSNMPReadWriteCommunity 1.3.6.1.4.1.244.1.1.2.6.8
The SNMP read-write community for SNMP versions 1 and 2.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcServSNMPTrapCommunity 1.3.6.1.4.1.244.1.1.2.6.9
The SNMP trap community for SNMP versions 1 and 2.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcServSNMPAlarmDelay 1.3.6.1.4.1.244.1.1.2.6.10
The delay, in seconds, between traps that are sent out for alarm conditions.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcServSNMPv3ReadWriteUser 1.3.6.1.4.1.244.1.1.2.6.11
The user name for read-write access to the SLC via SNMP v3.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

slcServSNMPv3Security 1.3.6.1.4.1.244.1.1.2.6.12
The security model used for SNMP v3: insecure authentication and no packet encryption, secure authentication and no packet encryption, secure authentication and packet encryption.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noAuthNoEncrypt(1), authNoEncrypt(2), authEncrypt(3)  

slcServSNMPv3Authentication 1.3.6.1.4.1.244.1.1.2.6.13
When slcServSNMPv3Security is set to authNoEncrypt or authEncrypt, the type of authentication used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER md5(1), sha(2)  

slcServSNMPv3Encryption 1.3.6.1.4.1.244.1.1.2.6.14
When slcServSNMPv3Security is set to authEncrypt, the type of encryption used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER des(1), aes(2)  

slcServSNMPv1v2 1.3.6.1.4.1.244.1.1.2.6.15
If enabled, SNMP version 1 and version 2 (which use the Read-Only and Read-Write Communities) is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServSNMPNMS2 1.3.6.1.4.1.244.1.1.2.6.16
The IPv4 Address of the 2nd Network Management System (NMS).
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcServSNMPNMSIPv6 1.3.6.1.4.1.244.1.1.2.6.17
The IPv6 Address of the Network Management System (NMS).
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcServSNMPNMS2IPv6 1.3.6.1.4.1.244.1.1.2.6.18
The IPv6 Address of the 2nd Network Management System (NMS).
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcServSMTP 1.3.6.1.4.1.244.1.1.2.7
OBJECT IDENTIFIER    

slcServSMTPServer 1.3.6.1.4.1.244.1.1.2.7.1
The IP Address of the SMTP (email) server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcServSMTPSender 1.3.6.1.4.1.244.1.1.2.7.2
The sender's email address for emails sent from the SLC.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcServNFS 1.3.6.1.4.1.244.1.1.2.8
OBJECT IDENTIFIER    

slcServNFSMountTable 1.3.6.1.4.1.244.1.1.2.8.1
Table of NFS Mounts.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcServNFSMountEntry

slcServNFSMountEntry 1.3.6.1.4.1.244.1.1.2.8.1.1
An entry containing a NFS Mount and it's attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcServNFSMountEntry  

slcServNFSMountIndex 1.3.6.1.4.1.244.1.1.2.8.1.1.1
Reference index for each NFS Mount.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..3  

slcServNFSMountRemoteDir 1.3.6.1.4.1.244.1.1.2.8.1.1.2
The remote directory of the NFS Mount, in the format :/.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcServNFSMountLocalDir 1.3.6.1.4.1.244.1.1.2.8.1.1.3
The directory in the SLC on which the remote directory is mounted.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcServNFSMountReadWrite 1.3.6.1.4.1.244.1.1.2.8.1.1.4
If enabled, the remote NFS directory is mounted read-write. If disabled, the remote NFS directory is mounted read-only.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServNFSMountMount 1.3.6.1.4.1.244.1.1.2.8.1.1.5
If enabled, the remote NFS directory is configured to be mounted. If disabled, the remote NFS directory will not be mounted, or will be unmounted if is is mounted.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServCIFS 1.3.6.1.4.1.244.1.1.2.9
OBJECT IDENTIFIER    

slcServCIFSState 1.3.6.1.4.1.244.1.1.2.9.1
If enabled, the SLC exports a CIFS share containing system logs, Device Port logs, and saved SLC configurations.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServCIFSEth1 1.3.6.1.4.1.244.1.1.2.9.2
If enabled, the CIFS share is exported on the Eth1 interface.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServCIFSEth2 1.3.6.1.4.1.244.1.1.2.9.3
If enabled, the CIFS share is exported on the Eth2 interface.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServCIFSWorkgroup 1.3.6.1.4.1.244.1.1.2.9.4
The SMB/CIFS workgroup that the CIFS share is associated with.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

slcServSLCNetwork 1.3.6.1.4.1.244.1.1.2.10
OBJECT IDENTIFIER    

slcServSLCNetSearch 1.3.6.1.4.1.244.1.1.2.10.1
Indicates how to search for SLCs on the network: by searching a list of manually entered IP Addresses, by broadcasting on the local subnet, or both.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER both(1), subnet(2), manual(3)  

slcServSLCNetNumber 1.3.6.1.4.1.244.1.1.2.10.2
The number of entries in the SLC Network Manual IP Address table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..200  

slcServSLCNetTable 1.3.6.1.4.1.244.1.1.2.10.3
Table of manually entered IP Address entries. The number of entries is given by the value of slcServSLCNetNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcServSLCNetEntry

slcServSLCNetEntry 1.3.6.1.4.1.244.1.1.2.10.3.1
An entry containing an IP Address for searching the SLC Network.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcServSLCNetEntry  

slcServSLCNetIndex 1.3.6.1.4.1.244.1.1.2.10.3.1.1
Reference index for each manual IP Address.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200  

slcServSLCNetIP 1.3.6.1.4.1.244.1.1.2.10.3.1.2
The IP Address to search for in the SLC Network.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcServPhoneHome 1.3.6.1.4.1.244.1.1.2.11
OBJECT IDENTIFIER    

slcServPhoneHomeState 1.3.6.1.4.1.244.1.1.2.11.1
Enables the Phone Home feature.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServPhoneHomeIP 1.3.6.1.4.1.244.1.1.2.11.2
The IP Address used for Phone Home communication.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcServHostList 1.3.6.1.4.1.244.1.1.2.12
OBJECT IDENTIFIER    

slcServHostListNumber 1.3.6.1.4.1.244.1.1.2.12.1
The number of entries in the Host List table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..50  

slcServHostListTable 1.3.6.1.4.1.244.1.1.2.12.2
Table of Host Lists. The number of entries is given by the value of slcServHostListNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcServHostListEntry

slcServHostListEntry 1.3.6.1.4.1.244.1.1.2.12.2.1
An entry containing a Host List, used for Dial-in connections on a Device Port or PC Card modem.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcServHostListEntry  

slcServHostListIndex 1.3.6.1.4.1.244.1.1.2.12.2.1.1
Reference index for each Host List.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

slcServHostListName 1.3.6.1.4.1.244.1.1.2.12.2.1.2
The unique name assigned to the Host List.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcServHostListRetryCount 1.3.6.1.4.1.244.1.1.2.12.2.1.3
The number of times to retry connections to an individual host within the Host List.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcServHostListAuth 1.3.6.1.4.1.244.1.1.2.12.2.1.4
If enabled, authentication is enabled for the hosts in the Host List.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServHostListNumHosts 1.3.6.1.4.1.244.1.1.2.12.2.1.5
The number of individual hosts in the Host List.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..10  

slcServHostListHosts 1.3.6.1.4.1.244.1.1.2.12.2.1.6
A string containing all hosts in the Host List; the entry for each host is separated by a ';'. Each host entry is formatted as follows: ',,,;'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcServWebTerm 1.3.6.1.4.1.244.1.1.2.13
OBJECT IDENTIFIER    

slcServWebTermDeployment 1.3.6.1.4.1.244.1.1.2.13.1
The method used to launch the Java Terminal for Web SSH and Web Telnet. This object is deprecated.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER javaWebStart(1), applet(2)  

slcServWebTermBufSize 1.3.6.1.4.1.244.1.1.2.13.2
The number of lines in the Java Terminal buffer.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 24..5000  

slcServSite 1.3.6.1.4.1.244.1.1.2.14
OBJECT IDENTIFIER    

slcServSiteNumber 1.3.6.1.4.1.244.1.1.2.14.1
The number of entries in the Sites table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..20  

slcServSiteTable 1.3.6.1.4.1.244.1.1.2.14.2
Table of Sites. The number of entries is given by the value of slcServSiteNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcServSiteEntry

slcServSiteEntry 1.3.6.1.4.1.244.1.1.2.14.2.1
An entry containing a Site, used for connections on a Device Port or PC Card/USB modem.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcServSiteEntry  

slcServSiteIndex 1.3.6.1.4.1.244.1.1.2.14.2.1.1
Reference index for each Site.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

slcServSiteName 1.3.6.1.4.1.244.1.1.2.14.2.1.2
The unique name assigned to the Site.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcServSitePort 1.3.6.1.4.1.244.1.1.2.14.2.1.3
The port the Site is assigned to. If the port is devicePort or usbPort, slcServSitePortId defines which Device Port or USB Port (with an attached modem) the port is assigned to.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), devicePort(2), upperPCCard(3), lowerPCCard(4), usbPort(5), internalModem(6)  

slcServSitePortId 1.3.6.1.4.1.244.1.1.2.14.2.1.4
The identifier for a Device Port if slcServSitePort equals devicePort(1), or the identifier for a USB Port if slcServSitePort equals usbPort(5). Otherwise equals zero.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..48  

slcServSiteLoginHost 1.3.6.1.4.1.244.1.1.2.14.2.1.5
For PPP or text authentication on dialin, the user login or CHAP host to use for authentication. If authentication is successful, the rest of the site parameters will be used for the connection.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcServSiteCHAPSecret 1.3.6.1.4.1.244.1.1.2.14.2.1.6
For PPP authentication on dialin, the CHAP secret to use for authentication.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcServSiteTimeout 1.3.6.1.4.1.244.1.1.2.14.2.1.7
The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..30  

slcServSiteLocalIP 1.3.6.1.4.1.244.1.1.2.14.2.1.8
For PPP connections, the local IP Address - all zeros if it should be negotiated.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcServSiteRemoteIP 1.3.6.1.4.1.244.1.1.2.14.2.1.9
For PPP connections, the remote IP Address - all zeros if it should be negotiated.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcServSiteStaticRouteIP 1.3.6.1.4.1.244.1.1.2.14.2.1.10
For Dial-on-Demand PPP connections, the static route IP Address for the remote network.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcServSiteStaticRouteMask 1.3.6.1.4.1.244.1.1.2.14.2.1.11
For Dial-on-Demand PPP connections, the static route subnet mask for the remote network.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcServSiteStaticRouteGateway 1.3.6.1.4.1.244.1.1.2.14.2.1.12
For Dial-on-Demand PPP connections, the static route gateway for the remote network.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcServSiteDialoutNum 1.3.6.1.4.1.244.1.1.2.14.2.1.13
The phone number to use for dial-out connections.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcServSiteDialoutLogin 1.3.6.1.4.1.244.1.1.2.14.2.1.14
For dial-out connections, the login to use for authenticating to the remote peer; or on dial-in, the login to use if the remote peer requests authentication (for example, a two way CHAP handshake).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

slcServSiteDialback 1.3.6.1.4.1.244.1.1.2.14.2.1.15
If enabled, the site has permission to use modem dialback.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServSiteDialbackNum 1.3.6.1.4.1.244.1.1.2.14.2.1.16
The phone number to use for dial-back connections.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcServSiteDialbackDelay 1.3.6.1.4.1.244.1.1.2.14.2.1.17
For Dial-back, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcServSiteIdleTimeout 1.3.6.1.4.1.244.1.1.2.14.2.1.18
The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP connection will be terminated. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcServSiteRestartDelay 1.3.6.1.4.1.244.1.1.2.14.2.1.19
The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcServSiteCBCPServerAllowNoCallback 1.3.6.1.4.1.244.1.1.2.14.2.1.20
If enabled, the SLC will allow the PPP peer to select the No Callback option during CBCP negotiation.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServSiteNATState 1.3.6.1.4.1.244.1.1.2.14.2.1.21
If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcServSiteDialbackRetries 1.3.6.1.4.1.244.1.1.2.14.2.1.22
For Dial-back, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt to dial-out fails.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcAuthLocal 1.3.6.1.4.1.244.1.1.3.1
OBJECT IDENTIFIER    

slcAuthLocalNumber 1.3.6.1.4.1.244.1.1.3.1.1
The number of entries in the Local Users table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..128  

slcAuthLocalUsersTable 1.3.6.1.4.1.244.1.1.3.1.2
Table of Local Users entries. The number of entries is given by the value of slcAuthLocalNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcAuthLocalUserEntry

slcAuthLocalUserEntry 1.3.6.1.4.1.244.1.1.3.1.2.1
An entry containing a Local Users and it's attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcAuthLocalUserEntry  

slcAuthLocalUserIndex 1.3.6.1.4.1.244.1.1.3.1.2.1.1
Reference index for each Local User.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..128  

slcAuthLocalUserLogin 1.3.6.1.4.1.244.1.1.3.1.2.1.2
The login for the Local User. If the user account is locked (cannot login), the login is appended with a '*' character.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..33)  

slcAuthLocalUserUID 1.3.6.1.4.1.244.1.1.3.1.2.1.3
The unique user identifier number for the Local User.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

slcAuthLocalUserListenPorts 1.3.6.1.4.1.244.1.1.3.1.2.1.4
The Device Ports and PC Card slots/USB ports which the Local User has permission to access via 'connect listen'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLocalUserDataPorts 1.3.6.1.4.1.244.1.1.3.1.2.1.5
The Device Ports and PC Card slots/USB ports which the Local User has permission to access via 'connect direct'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLocalUserClearPorts 1.3.6.1.4.1.244.1.1.3.1.2.1.6
The Device Ports and PC Card slots/USB ports which the Local User has permission to clear.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLocalUserEscapeSeq 1.3.6.1.4.1.244.1.1.3.1.2.1.7
The character sequence which the Local User uses to terminate connections to Device Ports.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLocalUserBreakSeq 1.3.6.1.4.1.244.1.1.3.1.2.1.8
The character sequence which the Local User uses to send a break sequence.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLocalUserMenu 1.3.6.1.4.1.244.1.1.3.1.2.1.9
The custom user menu defined for the Local User. If this is empty, there is no menu defined for the Local User. The menu name is followed by a slash '/' character and either a 'y' if the menu is automatically displayed at login, or a 'n' if it is not automatically displayed at login.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLocalUserDialback 1.3.6.1.4.1.244.1.1.3.1.2.1.10
If enabled, the Local User has permission to use modem dialback.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthLocalUserDialbackNum 1.3.6.1.4.1.244.1.1.3.1.2.1.11
The dialback number defined for the Local User.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLocalUserGroup 1.3.6.1.4.1.244.1.1.3.1.2.1.12
The group assigned to the Local User.
Status: current Access: read-only
OBJECT-TYPE    
  UserGroup  

slcAuthLocalUserRights 1.3.6.1.4.1.244.1.1.3.1.2.1.13
The rights assigned to the Local User.
Status: current Access: read-only
OBJECT-TYPE    
  UserRights  

slcAuthLocalUserPwdExpires 1.3.6.1.4.1.244.1.1.3.1.2.1.14
If enabled, the local user's password will expire.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthLocalUserChangePwd 1.3.6.1.4.1.244.1.1.3.1.2.1.15
If enabled, the local user can change their password.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthLocalUserChangePwdNextLogin 1.3.6.1.4.1.244.1.1.3.1.2.1.16
If enabled, the local user must change their password at their next login.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthLocalState 1.3.6.1.4.1.244.1.1.3.1.3
If enabled, Local Users are used for authentication.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthLocalOrder 1.3.6.1.4.1.244.1.1.3.1.4
The authentication order of Local Users in authentication methods.
Status: current Access: read-only
OBJECT-TYPE    
  AuthOrder  

slcAuthLocalComplexPasswords 1.3.6.1.4.1.244.1.1.3.1.5
If enabled, Local Users are required to use complex passwords that are at least 8 characters long and contain at least one uppercase character, one lowercase character, one digit, and one non-alphanumeric character.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthLocalUseNextMethod 1.3.6.1.4.1.244.1.1.3.1.6
This object applies to all authentication methods, not just Local Users. If enabled, authentication will occur using all methods, in the order of their precedence, until a successful authentication occurs. If disabled, only the first authentication method that responds will be used.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthLocalAllowReuse 1.3.6.1.4.1.244.1.1.3.1.7
If enabled, local users can reuse old passwords.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthLocalReuseHistory 1.3.6.1.4.1.244.1.1.3.1.8
The number of passwords a local user must use before reusing an old password.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..8  

slcAuthLocalPasswordLifetime 1.3.6.1.4.1.244.1.1.3.1.9
The number of days until a password expires.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..365  

slcAuthLocalWarningPeriod 1.3.6.1.4.1.244.1.1.3.1.10
The number of days before a password expires that a local user is warned about the expiring password. A value of 0 indicates that this feature is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..90  

slcAuthLocalMaxLoginAttempts 1.3.6.1.4.1.244.1.1.3.1.11
The number of times a local user can attempt to log in unsuccessfully before the SLC locks the user out. A value of 0 indicates that this feature is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..8  

slcAuthLocalLockoutPeriod 1.3.6.1.4.1.244.1.1.3.1.12
The number of minutes the locked-out user must wait before trying to log in to to the SLC again. A value of 0 indicates that this feature is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..90  

slcAuthLocalMultipleSysadminLogins 1.3.6.1.4.1.244.1.1.3.1.13
If enabled, multiple sysadmin logins to the web are allowed.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthLocalSysadminConsoleOnly 1.3.6.1.4.1.244.1.1.3.1.14
If enabled, the sysadmin can only access the SLC via the Console Port.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthNIS 1.3.6.1.4.1.244.1.1.3.2
OBJECT IDENTIFIER    

slcAuthNISState 1.3.6.1.4.1.244.1.1.3.2.1
If enabled, NIS is used for authentication.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthNISOrder 1.3.6.1.4.1.244.1.1.3.2.2
The authentication order of NIS in remote authentication methods.
Status: current Access: read-only
OBJECT-TYPE    
  AuthOrder  

slcAuthNISDomain 1.3.6.1.4.1.244.1.1.3.2.3
The NIS domain.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..80)  

slcAuthNISBroadcast 1.3.6.1.4.1.244.1.1.3.2.4
If enabled, the SLC broadcasts for the NIS server.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthNISMaster 1.3.6.1.4.1.244.1.1.3.2.5
The IP Address of the NIS master server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcAuthNISSlave1 1.3.6.1.4.1.244.1.1.3.2.6
The IP Address of the NIS slave server #1.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcAuthNISSlave2 1.3.6.1.4.1.244.1.1.3.2.7
The IP Address of the NIS slave server #2.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcAuthNISSlave3 1.3.6.1.4.1.244.1.1.3.2.8
The IP Address of the NIS slave server #3.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcAuthNISGroup 1.3.6.1.4.1.244.1.1.3.2.9
The group assigned to NIS users who login to the SLC and do not have group/rights defined in the Remote User database.
Status: current Access: read-only
OBJECT-TYPE    
  UserGroup  

slcAuthNISRights 1.3.6.1.4.1.244.1.1.3.2.10
The rights assigned to NIS users who login to the SLC and do not have group/rights defined in the Remote User database.
Status: current Access: read-only
OBJECT-TYPE    
  UserRights  

slcAuthNISMenu 1.3.6.1.4.1.244.1.1.3.2.11
The custom user menu defined for all NIS users who login to the SLC. If this is empty, there is no menu defined for NIS Users.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthNISListenPorts 1.3.6.1.4.1.244.1.1.3.2.12
The Device Ports and PC Card slots/USB ports which users authenticated via NIS have permission to access via 'connect listen'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthNISDataPorts 1.3.6.1.4.1.244.1.1.3.2.13
The Device Ports and PC Card slots/USB ports which users authenticated via NIS have permission to access via 'connect direct'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthNISClearPorts 1.3.6.1.4.1.244.1.1.3.2.14
The Device Ports and PC Card slots/USB ports which users authenticated via NIS have permission to clear.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthNISSlave4 1.3.6.1.4.1.244.1.1.3.2.15
The IP Address of the NIS slave server #4.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcAuthNISSlave5 1.3.6.1.4.1.244.1.1.3.2.16
The IP Address of the NIS slave server #5.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcAuthNISEscapeSeq 1.3.6.1.4.1.244.1.1.3.2.17
The character sequence which the NIS user uses to terminate connections to Device Ports.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthNISBreakSeq 1.3.6.1.4.1.244.1.1.3.2.18
The character sequence which the NIS user uses to send a break sequence.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthNISDialback 1.3.6.1.4.1.244.1.1.3.2.19
If enabled, NIS users have permission to use modem dialback.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthNISDialbackNum 1.3.6.1.4.1.244.1.1.3.2.20
The dialback number defined for NIS users.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLDAP 1.3.6.1.4.1.244.1.1.3.3
OBJECT IDENTIFIER    

slcAuthLDAPState 1.3.6.1.4.1.244.1.1.3.3.1
If enabled, LDAP is used for authentication.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthLDAPOrder 1.3.6.1.4.1.244.1.1.3.3.2
The authentication order of LDAP in remote authentication methods.
Status: current Access: read-only
OBJECT-TYPE    
  AuthOrder  

slcAuthLDAPServer 1.3.6.1.4.1.244.1.1.3.3.3
The IPv4 Address of the LDAP server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcAuthLDAPBase 1.3.6.1.4.1.244.1.1.3.3.4
The LDAP Base.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..80)  

slcAuthLDAPBindName 1.3.6.1.4.1.244.1.1.3.3.5
The LDAP Bind Name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..80)  

slcAuthLDAPPort 1.3.6.1.4.1.244.1.1.3.3.6
The LDAP TCP Port Number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

slcAuthLDAPADSupport 1.3.6.1.4.1.244.1.1.3.3.7
If enabled, Active Directory support is enabled for LDAP.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthLDAPGroup 1.3.6.1.4.1.244.1.1.3.3.8
The group assigned to LDAP users who login to the SLC and do not have group/rights defined in the Remote User database.
Status: current Access: read-only
OBJECT-TYPE    
  UserGroup  

slcAuthLDAPRights 1.3.6.1.4.1.244.1.1.3.3.9
The rights assigned to LDAP users who login to the SLC and do not have group/rights defined in the Remote User database.
Status: current Access: read-only
OBJECT-TYPE    
  UserRights  

slcAuthLDAPMenu 1.3.6.1.4.1.244.1.1.3.3.10
The custom user menu defined for all LDAP users who login to the SLC. If this is empty, there is no menu defined for LDAP Users.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLDAPListenPorts 1.3.6.1.4.1.244.1.1.3.3.11
The Device Ports and PC Card slots/USB ports which users authenticated via LDAP have permission to access via 'connect listen'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLDAPDataPorts 1.3.6.1.4.1.244.1.1.3.3.12
The Device Ports and PC Card slots/USB ports which users authenticated via LDAP have permission to access via 'connect direct'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLDAPClearPorts 1.3.6.1.4.1.244.1.1.3.3.13
The Device Ports and PC Card slots/USB ports which users authenticated via LDAP have permission to clear.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLDAPEncrypt 1.3.6.1.4.1.244.1.1.3.3.14
If enabled, encrypt messages between the SLC and the LDAP server.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthLDAPEscapeSeq 1.3.6.1.4.1.244.1.1.3.3.15
The character sequence which the LDAP user uses to terminate connections to Device Ports.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLDAPBreakSeq 1.3.6.1.4.1.244.1.1.3.3.16
The character sequence which the LDAP user uses to send a break sequence.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLDAPBindWithLogin 1.3.6.1.4.1.244.1.1.3.3.17
If enabled, bind to the LDAP server using the current login and password. The token in slcAuthLDAPBindName will be replaced with the current login.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthLDAPUseLDAPSchema 1.3.6.1.4.1.244.1.1.3.3.18
If enabled, attributes and permissions for remote users are retrieved from an LDAP server.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthLDAPDialback 1.3.6.1.4.1.244.1.1.3.3.19
If enabled, LDAP users have permission to use modem dialback.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthLDAPDialbackNum 1.3.6.1.4.1.244.1.1.3.3.20
The dialback number defined for LDAP users.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLDAPUserFilter 1.3.6.1.4.1.244.1.1.3.3.21
The attribute used by the LDAP server for user logins.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLDAPGroupFilter 1.3.6.1.4.1.244.1.1.3.3.22
The objectclass used by the LDAP server for groups.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLDAPGroupMembershipAttr 1.3.6.1.4.1.244.1.1.3.3.23
The attribute used by the LDAP server for group membership. This attribute may be use to search for a name (ie, msmith) or a Distinguished Name (ie, uid=msmith,ou=People,dc=lantronix,dc=com).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthLDAPGroupMembershipDN 1.3.6.1.4.1.244.1.1.3.3.24
If enabled, the string given by slcAuthLDAPGroupMembershipAttr is a Distinguished Name (DN). Otherwise the string is a name.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthLDAPServer2 1.3.6.1.4.1.244.1.1.3.3.25
The IPv4 Address of the secondary/backup LDAP server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcAuthLDAPServerIPv6 1.3.6.1.4.1.244.1.1.3.3.26
The IPv6 Address of the LDAP server.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcAuthLDAPServer2IPv6 1.3.6.1.4.1.244.1.1.3.3.27
The IPv6 Address of the secondary/backup LDAP server.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcAuthRADIUS 1.3.6.1.4.1.244.1.1.3.4
OBJECT IDENTIFIER    

slcAuthRADIUSState 1.3.6.1.4.1.244.1.1.3.4.1
If enabled, RADIUS is used for authentication.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthRADIUSOrder 1.3.6.1.4.1.244.1.1.3.4.2
The authentication order of RADIUS in remote authentication methods.
Status: current Access: read-only
OBJECT-TYPE    
  AuthOrder  

slcAuthRADIUSTimeout 1.3.6.1.4.1.244.1.1.3.4.3
The RADIUS Timeout in seconds. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..30  

slcAuthRADIUSServerTable 1.3.6.1.4.1.244.1.1.3.4.4
Table of RADIUS servers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcAuthRADIUSServerEntry

slcAuthRADIUSServerEntry 1.3.6.1.4.1.244.1.1.3.4.4.1
An entry containing a RADIUS server and it's parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcAuthRADIUSServerEntry  

slcAuthRADIUSServerIndex 1.3.6.1.4.1.244.1.1.3.4.4.1.1
Reference index for each RADIUS server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2  

slcAuthRADIUSServer 1.3.6.1.4.1.244.1.1.3.4.4.1.2
The IPv4 Address of the RADIUS server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcAuthRADIUSPort 1.3.6.1.4.1.244.1.1.3.4.4.1.3
The RADIUS Server TCP Port Number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

slcAuthRADIUSServerIPv6 1.3.6.1.4.1.244.1.1.3.4.4.1.4
The IPv6 Address of the RADIUS server.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcAuthRADIUSGroup 1.3.6.1.4.1.244.1.1.3.4.5
The group assigned to RADIUS users who login to the SLC and do not have group/rights defined in the Remote User database.
Status: current Access: read-only
OBJECT-TYPE    
  UserGroup  

slcAuthRADIUSRights 1.3.6.1.4.1.244.1.1.3.4.6
The rights assigned to RADIUS users who login to the SLC and do not have group/rights defined in the Remote User database.
Status: current Access: read-only
OBJECT-TYPE    
  UserRights  

slcAuthRADIUSMenu 1.3.6.1.4.1.244.1.1.3.4.7
The custom user menu defined for all RADIUS users who login to the SLC. If this is empty, there is no menu defined for RADIUS Users.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthRADIUSListenPorts 1.3.6.1.4.1.244.1.1.3.4.8
The Device Ports and PC Card slots/USB ports which users authenticated via RADIUS have permission to access via 'connect listen'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthRADIUSDataPorts 1.3.6.1.4.1.244.1.1.3.4.9
The Device Ports and PC Card slots/USB ports which users authenticated via RADIUS have permission to access via 'connect direct'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthRADIUSClearPorts 1.3.6.1.4.1.244.1.1.3.4.10
The Device Ports and PC Card slots/USB ports which users authenticated via RADIUS have permission to clear.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthRADIUSEscapeSeq 1.3.6.1.4.1.244.1.1.3.4.11
The character sequence which the RADIUS user uses to terminate connections to Device Ports.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthRADIUSBreakSeq 1.3.6.1.4.1.244.1.1.3.4.12
The character sequence which the RADIUS user uses to send a break sequence.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthRADIUSDialback 1.3.6.1.4.1.244.1.1.3.4.13
If enabled, RADIUS users have permission to use modem dialback.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthRADIUSDialbackNum 1.3.6.1.4.1.244.1.1.3.4.14
The dialback number defined for RADIUS users.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthRADIUSUseVSA 1.3.6.1.4.1.244.1.1.3.4.15
If enabled, the SLC will obtain remote user attributes (group/permissions and port access) from the RADIUS server via the Vendor-Specific Attribute (VSA).
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthKerberos 1.3.6.1.4.1.244.1.1.3.5
OBJECT IDENTIFIER    

slcAuthKerbState 1.3.6.1.4.1.244.1.1.3.5.1
If enabled, Kerberos is used for authentication.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthKerbOrder 1.3.6.1.4.1.244.1.1.3.5.2
The authentication order of Kerberos in remote authentication methods.
Status: current Access: read-only
OBJECT-TYPE    
  AuthOrder  

slcAuthKerbRealm 1.3.6.1.4.1.244.1.1.3.5.3
The Kerberos Realm.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

slcAuthKerbKDC 1.3.6.1.4.1.244.1.1.3.5.4
The Kerberos KDC.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

slcAuthKerbKDCIP 1.3.6.1.4.1.244.1.1.3.5.5
The IPv4 Address of the Kerberos Key Distribution Server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcAuthKerbKDCPort 1.3.6.1.4.1.244.1.1.3.5.6
The Kerberos KDC Port Number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

slcAuthKerbUseLDAP 1.3.6.1.4.1.244.1.1.3.5.7
If enabled, LDAP is used for lookups.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthKerbGroup 1.3.6.1.4.1.244.1.1.3.5.8
The group assigned to Kerberos users who login to the SLC and do not have group/rights defined in the Remote User database.
Status: current Access: read-only
OBJECT-TYPE    
  UserGroup  

slcAuthKerbRights 1.3.6.1.4.1.244.1.1.3.5.9
The rights assigned to Kerberos users who login to the SLC and do not have group/rights defined in the Remote User database.
Status: current Access: read-only
OBJECT-TYPE    
  UserRights  

slcAuthKerbMenu 1.3.6.1.4.1.244.1.1.3.5.10
The custom user menu defined for all Kerberos users who login to the SLC. If this is empty, there is no menu defined for Kerberos Users.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthKerbListenPorts 1.3.6.1.4.1.244.1.1.3.5.11
The Device Ports and PC Card slots/USB ports which users authenticated via Kerberos have permission to access via 'connect listen'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthKerbDataPorts 1.3.6.1.4.1.244.1.1.3.5.12
The Device Ports and PC Card slots/USB ports which users authenticated via Kerberos have permission to access via 'connect direct'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthKerbClearPorts 1.3.6.1.4.1.244.1.1.3.5.13
The Device Ports and PC Card slots/USB ports which users authenticated via Kerberos have permission to clear.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthKerbEscapeSeq 1.3.6.1.4.1.244.1.1.3.5.14
The character sequence which the Kerberos user uses to terminate connections to Device Ports.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthKerbBreakSeq 1.3.6.1.4.1.244.1.1.3.5.15
The character sequence which the Kerberos user uses to send a break sequence.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthKerbDialback 1.3.6.1.4.1.244.1.1.3.5.16
If enabled, Kerberos users have permission to use modem dialback.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthKerbDialbackNum 1.3.6.1.4.1.244.1.1.3.5.17
The dialback number defined for Kerberos users.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthKerbKDCIPv6 1.3.6.1.4.1.244.1.1.3.5.18
The IPv6 Address of the Kerberos Key Distribution Server.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcAuthTACACS 1.3.6.1.4.1.244.1.1.3.6
OBJECT IDENTIFIER    

slcAuthTACACSState 1.3.6.1.4.1.244.1.1.3.6.1
If enabled, TACACS is used for authentication.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthTACACSOrder 1.3.6.1.4.1.244.1.1.3.6.2
The authentication order of TACACS in remote authentication methods.
Status: current Access: read-only
OBJECT-TYPE    
  AuthOrder  

slcAuthTACACSServer 1.3.6.1.4.1.244.1.1.3.6.3
The IPv4 Address of the first TACACS server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcAuthTACACSEncrypt 1.3.6.1.4.1.244.1.1.3.6.4
If enabled, encrypt messages between the SLC and the TACACS server.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthTACACSGroup 1.3.6.1.4.1.244.1.1.3.6.5
The group assigned to TACACS users who login to the SLC and do not have group/rights defined in the Remote User database.
Status: current Access: read-only
OBJECT-TYPE    
  UserGroup  

slcAuthTACACSRights 1.3.6.1.4.1.244.1.1.3.6.6
The rights assigned to TACACS users who login to the SLC and do not have group/rights defined in the Remote User database.
Status: current Access: read-only
OBJECT-TYPE    
  UserRights  

slcAuthTACACSMenu 1.3.6.1.4.1.244.1.1.3.6.7
The custom user menu defined for all TACACS users who login to the SLC. If this is empty, there is no menu defined for TACACS Users.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthTACACSListenPorts 1.3.6.1.4.1.244.1.1.3.6.8
The Device Ports and PC Card slots/USB ports which users authenticated via TACACS have permission to access via 'connect listen'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthTACACSDataPorts 1.3.6.1.4.1.244.1.1.3.6.9
The Device Ports and PC Card slots/USB ports which users authenticated via TACACS have permission to access via 'connect direct'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthTACACSClearPorts 1.3.6.1.4.1.244.1.1.3.6.10
The Device Ports and PC Card slots/USB ports which users authenticated via TACACS have permission to clear.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthTACACSServer2 1.3.6.1.4.1.244.1.1.3.6.11
The IPv4 Address of the second TACACS server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcAuthTACACSServer3 1.3.6.1.4.1.244.1.1.3.6.12
The IPv4 Address of the third TACACS server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcAuthTACACSEscapeSeq 1.3.6.1.4.1.244.1.1.3.6.13
The character sequence which the TACACS user uses to terminate connections to Device Ports.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthTACACSBreakSeq 1.3.6.1.4.1.244.1.1.3.6.14
The character sequence which the TACACS user uses to send a break sequence.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthTACACSDialback 1.3.6.1.4.1.244.1.1.3.6.15
If enabled, TACACS users have permission to use modem dialback.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthTACACSDialbackNum 1.3.6.1.4.1.244.1.1.3.6.16
The dialback number defined for TACACS users.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthTACACSAuthService 1.3.6.1.4.1.244.1.1.3.6.17
The type of service used to pass the authentications tokens (e.g., login and password) between the SLC and the TACACS+ server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pppPAP(1), pppCHAP(2), asciiLogin(3)  

slcAuthTACACSServerIPv6 1.3.6.1.4.1.244.1.1.3.6.18
The IPv6 Address of the first TACACS server.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcAuthTACACSServer2IPv6 1.3.6.1.4.1.244.1.1.3.6.19
The IPv6 Address of the second TACACS server.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcAuthTACACSServer3IPv6 1.3.6.1.4.1.244.1.1.3.6.20
The IPv6 Address of the third TACACS server.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

slcAuthRemote 1.3.6.1.4.1.244.1.1.3.7
OBJECT IDENTIFIER    

slcAuthRemoteNumber 1.3.6.1.4.1.244.1.1.3.7.1
The number of entries in the Remote Users table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..128  

slcAuthRemoteUsersTable 1.3.6.1.4.1.244.1.1.3.7.2
Table of Remote Users entries. The number of entries is given by the value of slcAuthRemoteNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcAuthRemoteUserEntry

slcAuthRemoteUserEntry 1.3.6.1.4.1.244.1.1.3.7.2.1
An entry containing a Remote User and its attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcAuthRemoteUserEntry  

slcAuthRemoteUserIndex 1.3.6.1.4.1.244.1.1.3.7.2.1.1
Reference index for each Remote User.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..128  

slcAuthRemoteUserLogin 1.3.6.1.4.1.244.1.1.3.7.2.1.2
The login for the Remote User.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

slcAuthRemoteUserGroup 1.3.6.1.4.1.244.1.1.3.7.2.1.3
The group assigned to the Remote User.
Status: current Access: read-only
OBJECT-TYPE    
  UserGroup  

slcAuthRemoteUserRights 1.3.6.1.4.1.244.1.1.3.7.2.1.4
The rights assigned to the Remote User.
Status: current Access: read-only
OBJECT-TYPE    
  UserRights  

slcAuthRemoteUserListenPorts 1.3.6.1.4.1.244.1.1.3.7.2.1.5
The Device Ports and PC Card slots/USB ports which the Remote User has permission to access via 'connect listen'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthRemoteUserDataPorts 1.3.6.1.4.1.244.1.1.3.7.2.1.6
The Device Ports and PC Card slots/USB ports which the Remote User has permission to access via 'connect direct'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthRemoteUserClearPorts 1.3.6.1.4.1.244.1.1.3.7.2.1.7
The Device Ports and PC Card slots/USB ports which the Remote User has permission to clear.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthRemoteUserEscapeSeq 1.3.6.1.4.1.244.1.1.3.7.2.1.8
The character sequence which the Remote User uses to terminate connections to Device Ports.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthRemoteUserBreakSeq 1.3.6.1.4.1.244.1.1.3.7.2.1.9
The character sequence which the Remote User uses to send a break sequence.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthRemoteUserMenu 1.3.6.1.4.1.244.1.1.3.7.2.1.10
The custom user menu defined for the Remote User. If this is empty, there is no menu defined for the Remote User. The menu name is followed by a slash '/' character and either a 'y' if the menu is automatically displayed at login, or a 'n' if it is not automatically displayed at login.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthRemoteUserLocked 1.3.6.1.4.1.244.1.1.3.7.2.1.11
If enabled, the Remote User's account is locked (blocked).
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthRemoteUserDialback 1.3.6.1.4.1.244.1.1.3.7.2.1.12
If enabled, the Remote User has permission to use modem dialback.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthRemoteUserDialbackNum 1.3.6.1.4.1.244.1.1.3.7.2.1.13
The dialback number defined for the Remote User.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthRemoteAuthListOnly 1.3.6.1.4.1.244.1.1.3.7.3
If enabled, remote users who log into the SLC will only be authenticated if they are listed in the remote user list.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthGroups 1.3.6.1.4.1.244.1.1.3.8
OBJECT IDENTIFIER    

slcAuthGroupsNumber 1.3.6.1.4.1.244.1.1.3.8.1
The number of entries in the Groups table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..20  

slcAuthGroupsTable 1.3.6.1.4.1.244.1.1.3.8.2
Table of Groups entries. The number of entries is given by the value of slcAuthGroupsNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcAuthGroupEntry

slcAuthGroupEntry 1.3.6.1.4.1.244.1.1.3.8.2.1
An entry containing a Remote User and its attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcAuthGroupEntry  

slcAuthGroupIndex 1.3.6.1.4.1.244.1.1.3.8.2.1.1
Reference index for each Group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..128  

slcAuthGroupName 1.3.6.1.4.1.244.1.1.3.8.2.1.2
The name for the Group.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

slcAuthGroupRights 1.3.6.1.4.1.244.1.1.3.8.2.1.3
The rights assigned to the Group.
Status: current Access: read-only
OBJECT-TYPE    
  UserRights  

slcAuthGroupListenPorts 1.3.6.1.4.1.244.1.1.3.8.2.1.4
The Device Ports and PC Card slots/USB ports which the Group has permission to access via 'connect listen'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthGroupDataPorts 1.3.6.1.4.1.244.1.1.3.8.2.1.5
The Device Ports and PC Card slots/USB ports which the Group has permission to access via 'connect direct'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthGroupClearPorts 1.3.6.1.4.1.244.1.1.3.8.2.1.6
The Device Ports and PC Card slots/USB ports which the Group has permission to clear.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthGroupEscapeSeq 1.3.6.1.4.1.244.1.1.3.8.2.1.7
The character sequence which the Group uses to terminate connections to Device Ports.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthGroupBreakSeq 1.3.6.1.4.1.244.1.1.3.8.2.1.8
The character sequence which the Group uses to send a break sequence.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthGroupMenu 1.3.6.1.4.1.244.1.1.3.8.2.1.9
The custom user menu defined for the Group. If this is empty, there is no menu defined for the Group. The menu name is followed by a slash '/' character and either a 'y' if the menu is automatically displayed at login, or a 'n' if it is not automatically displayed at login.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcAuthGroupDialback 1.3.6.1.4.1.244.1.1.3.8.2.1.10
If enabled, the Group has permission to use modem dialback.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcAuthGroupDialbackNum 1.3.6.1.4.1.244.1.1.3.8.2.1.11
The dialback number defined for the Group.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevConsolePort 1.3.6.1.4.1.244.1.1.4.1
OBJECT IDENTIFIER    

slcDevConBaud 1.3.6.1.4.1.244.1.1.4.1.1
The baud rate of the Console Port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200  

slcDevConDataBits 1.3.6.1.4.1.244.1.1.4.1.2
The data bits of the Console Port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 7 | 8  

slcDevConStopBits 1.3.6.1.4.1.244.1.1.4.1.3
The stop bits of the Console Port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1 | 2  

slcDevConParity 1.3.6.1.4.1.244.1.1.4.1.4
The parity of the Console Port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3)  

slcDevConFlowControl 1.3.6.1.4.1.244.1.1.4.1.5
The flow control of the Console Port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), xonxoff(2), rtscts(3)  

slcDevConTimeout 1.3.6.1.4.1.244.1.1.4.1.6
The timeout (in minutes) for logins to the Console Port. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..30  

slcDevConShowLines 1.3.6.1.4.1.244.1.1.4.1.7
If enabled, upon connecting to the Console Port, a series of characters (or lines) output to the Console Port before it was connected to are displayed.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevConNumberShowLines 1.3.6.1.4.1.244.1.1.4.1.8
If slcDevConShowLines is enabled, the number of lines that are displayed upon connecting to the Console Port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

slcDevConGroup 1.3.6.1.4.1.244.1.1.4.1.9
The group or groups that may access the Console Port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevDevicePorts 1.3.6.1.4.1.244.1.1.4.2
OBJECT IDENTIFIER    

slcDevPortGlobal 1.3.6.1.4.1.244.1.1.4.2.1
OBJECT IDENTIFIER    

slcDevGlobalListenPorts 1.3.6.1.4.1.244.1.1.4.2.1.1
The Device Ports which remotely authenticated users have permission to access via 'connect listen'. This object has been replaced by permissions for each remote authentication method: slcAuthNISListenPorts, slcAuthLDAPListenPorts, slcAuthRADIUSListenPorts, slcAuthKerbListenPorts, slcAuthTACACSListenPorts.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevGlobalDataPorts 1.3.6.1.4.1.244.1.1.4.2.1.2
The Device Ports which remotely authenticated users have permission to access via 'connect direct'. This object has been replaced by permissions for each remote authentication method: slcAuthNISDataPorts, slcAuthLDAPDataPorts, slcAuthRADIUSDataPorts, slcAuthKerbDataPorts, slcAuthTACACSDataPorts.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevGlobalClearPorts 1.3.6.1.4.1.244.1.1.4.2.1.3
The Device Ports which remotely authenticated users have permission to clear. This object has been replaced by permissions for each remote authentication method: slcAuthNISClearPorts, slcAuthLDAPClearPorts, slcAuthRADIUSClearPorts, slcAuthKerbClearPorts, slcAuthTACACSClearPorts.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevGlobalStartTelnetPort 1.3.6.1.4.1.244.1.1.4.2.1.4
The starting TCP port for Telnet in connections to Device Ports.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

slcDevGlobalStartSSHPort 1.3.6.1.4.1.244.1.1.4.2.1.5
The starting TCP port for SSH in connections to Device Ports.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

slcDevGlobalStartTCPPort 1.3.6.1.4.1.244.1.1.4.2.1.6
The starting TCP port for TCP in connections to Device Ports.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

slcDevGlobalMaxDirect 1.3.6.1.4.1.244.1.1.4.2.1.7
The maximum number of direct connects allowed for each Device Port.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32 0..10  

slcDevPortConfig 1.3.6.1.4.1.244.1.1.4.2.2
OBJECT IDENTIFIER    

slcDevPortCfgNumber 1.3.6.1.4.1.244.1.1.4.2.2.1
The number of entries in the Device Port Configuration table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 8 | 16 | 24 | 32 | 40 | 48  

slcDevPortCfgTable 1.3.6.1.4.1.244.1.1.4.2.2.2
Table for managing Device Port configuration. The number of entries is given by the value of slcDevPortCfgNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcDevPortCfgEntry

slcDevPortCfgEntry 1.3.6.1.4.1.244.1.1.4.2.2.2.1
An entry containing all configuration settings for a Device Port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcDevPortCfgEntry  

slcDevPortId 1.3.6.1.4.1.244.1.1.4.2.2.2.1.1
The identifier for a Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..48  

slcDevPortCfgName 1.3.6.1.4.1.244.1.1.4.2.2.2.1.2
The name of the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..30)  

slcDevPortCfgDevice 1.3.6.1.4.1.244.1.1.4.2.2.2.1.3
The device that is connected to the Device Port. The 'slp*' and 'servertech' values are deprecated and have been replaced by the RPM functionality.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), slp8(2), slp16(3), slp8Exp8(4), slp8Exp16(5), slp16Exp8(6), slp16Exp16(7), sensorsoft(8), servertech(9), rpm(10)  

slcDevPortCfgDevLogin 1.3.6.1.4.1.244.1.1.4.2.2.2.1.4
The login used to authenticate to the device connected to the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

slcDevPortCfgBreakSeq 1.3.6.1.4.1.244.1.1.4.2.2.2.1.5
The character sequence for the Device Port to send a break.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgTelnetState 1.3.6.1.4.1.244.1.1.4.2.2.2.1.6
If enabled, Telnet connections to the Device Port are allowed.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgTelnetPort 1.3.6.1.4.1.244.1.1.4.2.2.2.1.7
TCP Port number for Telnet in connections.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1025..65535  

slcDevPortCfgTelnetAuth 1.3.6.1.4.1.244.1.1.4.2.2.2.1.8
If enabled, the user is required to authenticate to access a Device Port with Telnet.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgSSHState 1.3.6.1.4.1.244.1.1.4.2.2.2.1.9
If enabled, SSH connections to the Device Port are allowed.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgSSHPort 1.3.6.1.4.1.244.1.1.4.2.2.2.1.10
TCP Port number for SSH in connections.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1025..65535  

slcDevPortCfgSSHAuth 1.3.6.1.4.1.244.1.1.4.2.2.2.1.11
If enabled, the user is required to authenticate to access a Device Port with SSH.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgTCPState 1.3.6.1.4.1.244.1.1.4.2.2.2.1.12
If enabled, TCP connections to the Device Port are allowed.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgTCPPort 1.3.6.1.4.1.244.1.1.4.2.2.2.1.13
TCP Port number for TCP in connections.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1025..65535  

slcDevPortCfgTCPAuth 1.3.6.1.4.1.244.1.1.4.2.2.2.1.14
If enabled, the user is required to authenticate to access a Device Port with TCP.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgIP 1.3.6.1.4.1.244.1.1.4.2.2.2.1.15
The IP Address for Telnet, SSH or TCP in to a Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcDevPortCfgBaud 1.3.6.1.4.1.244.1.1.4.2.2.2.1.16
The baud rate of the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200  

slcDevPortCfgDataBits 1.3.6.1.4.1.244.1.1.4.2.2.2.1.17
The data bits of the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 7 | 8  

slcDevPortCfgStopBits 1.3.6.1.4.1.244.1.1.4.2.2.2.1.18
The stop bits of the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1 | 2  

slcDevPortCfgParity 1.3.6.1.4.1.244.1.1.4.2.2.2.1.19
The parity of the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3)  

slcDevPortCfgFlowControl 1.3.6.1.4.1.244.1.1.4.2.2.2.1.20
The flow control of the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), xonxoff(2), rtscts(3)  

slcDevPortCfgLogins 1.3.6.1.4.1.244.1.1.4.2.2.2.1.21
If enabled, authentication is required to access a serial device connected to a Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgConnectDSR 1.3.6.1.4.1.244.1.1.4.2.2.2.1.22
If enabled, the Device Port only establishes a connection if DSR (Data Set Ready) transitions to an asserted state.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgDisconnectDSR 1.3.6.1.4.1.244.1.1.4.2.2.2.1.23
If enabled, and a connection to a Device Port is currently in session, the connection will be terminated if DSR (Data Set Ready) transitions to a de-asserted state.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgModemState 1.3.6.1.4.1.244.1.1.4.2.2.2.1.24
For an external modem attached to the Device Port, indicates how the modem will be used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), dialout(2), dialin(3), dialback(4), dialondemand(5), dialinAndDialondemand(6), dialinHostList(7), cbcpServer(8), cbcpClient(9)  

slcDevPortCfgModemMode 1.3.6.1.4.1.244.1.1.4.2.2.2.1.25
For an external modem attached to the Device Port, the mode: PPP (for Dial-in and Dial-out) and text (for Dial-in and Dial-back).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ppp(1), text(2)  

slcDevPortCfgLocalIP 1.3.6.1.4.1.244.1.1.4.2.2.2.1.26
For PPP connections, the local IP Address - all zeros if it should be negotiated.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcDevPortCfgRemoteIP 1.3.6.1.4.1.244.1.1.4.2.2.2.1.27
For PPP connections, the remote IP Address - all zeros if it should be negotiated.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcDevPortCfgAuth 1.3.6.1.4.1.244.1.1.4.2.2.2.1.28
For PPP connections, the type of authentication to be used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pap(1), chap(2)  

slcDevPortCfgCHAPHost 1.3.6.1.4.1.244.1.1.4.2.2.2.1.29
For PPP connections with CHAP authentication, the host (for Unix) or user (for Windows) to use.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgInitScript 1.3.6.1.4.1.244.1.1.4.2.2.2.1.30
The initialization script for an external modem.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgTimeout 1.3.6.1.4.1.244.1.1.4.2.2.2.1.31
The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..30  

slcDevPortCfgDialoutNum 1.3.6.1.4.1.244.1.1.4.2.2.2.1.32
The phone number to use for dial-out connections.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgDialoutLogin 1.3.6.1.4.1.244.1.1.4.2.2.2.1.33
The login to use for dial-out connections.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

slcDevPortCfgDialbackMode 1.3.6.1.4.1.244.1.1.4.2.2.2.1.34
For dial-back connections, defines the phone number to call: a number associated with the authenticated user, or a fixed number associated with the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER usernumber(1), fixed(2)  

slcDevPortCfgDialbackNum 1.3.6.1.4.1.244.1.1.4.2.2.2.1.35
The phone number to use for dial-back connections.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgNATState 1.3.6.1.4.1.244.1.1.4.2.2.2.1.36
If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgLocalState 1.3.6.1.4.1.244.1.1.4.2.2.2.1.37
If enabled, local logging is enabled for the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgNFSFileState 1.3.6.1.4.1.244.1.1.4.2.2.2.1.38
If enabled, NFS File logging is enabled for the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgNFSDir 1.3.6.1.4.1.244.1.1.4.2.2.2.1.39
The local directory of a NFS mount to use for logging.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgNFSMaxFiles 1.3.6.1.4.1.244.1.1.4.2.2.2.1.40
The maximum number of files to use for NFS file logging.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgNFSMaxSize 1.3.6.1.4.1.244.1.1.4.2.2.2.1.41
The maximum size of each file (in bytes) for NFS File logging.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgEmailState 1.3.6.1.4.1.244.1.1.4.2.2.2.1.42
If enabled, Token and Data Detection (previously called 'Email Logging') is enabled for the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgEmailTrigger 1.3.6.1.4.1.244.1.1.4.2.2.2.1.43
The type of trigger to use for Token and Data Detection (previously called 'Email Logging') - number of data bytes received, or token/character string received.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER bytecnt(1), textstring(2)  

slcDevPortCfgEmailByteThresh 1.3.6.1.4.1.244.1.1.4.2.2.2.1.44
When Token and Data Detection (previously called 'Email Logging') is configured to trigger on a data byte count, the number of bytes required to trigger an action.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgEmailDelay 1.3.6.1.4.1.244.1.1.4.2.2.2.1.45
For Token and Data Detection (previously called 'Email Logging'), a time limit of how long the device port will capture data after the data trigger is detected and before closing the log file and performing the selected actions. This setting is now called 'Action Delay'.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgEmailRestartDelay 1.3.6.1.4.1.244.1.1.4.2.2.2.1.46
For Token and Data Detection (previously called 'Email Logging'), the period of time, after performing the selected actions, during which the device port will ignore additional characters received.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgEmailTextString 1.3.6.1.4.1.244.1.1.4.2.2.2.1.47
When Token and Data Detection (previously called 'Email Logging') is configured to trigger on a character string, this defines the character string that will trigger an action.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgEmailTo 1.3.6.1.4.1.244.1.1.4.2.2.2.1.48
For Token and Data Detection (previously called 'Email Logging'), if the Email action is enabled, this object defines the list of emails to send email notification to.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgEmailSubject 1.3.6.1.4.1.244.1.1.4.2.2.2.1.49
For Token and Data Detection (previously called 'Email Logging'), if the Email action is enabled, this object defines the subject to include with email notification.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgPCCardState 1.3.6.1.4.1.244.1.1.4.2.2.2.1.50
If enabled, PC Card logging is enabled for the Device Port. This value will be undefined if the SLC does not have PC Card slots.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgPCCardLogTo 1.3.6.1.4.1.244.1.1.4.2.2.2.1.51
For PC Card logging, which PC Card slot to use for logging. This value will be undefined if the SLC does not have PC Card slots.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER upperSlot(1), lowerSlot(2)  

slcDevPortCfgPCCardMaxFiles 1.3.6.1.4.1.244.1.1.4.2.2.2.1.52
The maximum number of files to use for PC Card logging. This value will be undefined if the SLC does not have PC Card slots.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgPCCardMaxSize 1.3.6.1.4.1.244.1.1.4.2.2.2.1.53
The maximum size of each file (in bytes) for PC Card logging. This value will be undefined if the SLC does not have PC Card slots.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgAction 1.3.6.1.4.1.244.1.1.4.2.2.2.1.54
Performs an action on a Device Port. A read of this object always returns the value noAction(1). Setting this object to zeroPortCounters(2) will reset all port counters given in slcDevPortStateTable. Setting this object to clearLocalLog(3) will clear the local logging buffer. Setting this object to terminateConnections(4) will terminate all connections associated with the Device Port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noAction(1), zeroPortCounters(2), clearLocalLog(3), terminateConnections(4)  

slcDevPortCfgEmailSend 1.3.6.1.4.1.244.1.1.4.2.2.2.1.55
When a trigger is received, the type of notification to send: email, SNMP trap, or email and SNMP trap. This object is deprecated; instead refer to slcDevPortCfgTokenAction.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER email(1), snmptrap(2), both(3)  

slcDevPortCfgBanner 1.3.6.1.4.1.244.1.1.4.2.2.2.1.56
The banner displayed when the Device Port is connected to via SSH or Telnet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgIdleTimeout 1.3.6.1.4.1.244.1.1.4.2.2.2.1.57
The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP connection will be terminated. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgRestartDelay 1.3.6.1.4.1.244.1.1.4.2.2.2.1.58
The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgCallerIdLogging 1.3.6.1.4.1.244.1.1.4.2.2.2.1.59
If enabled, caller id logging is enabled for a modem dial-in connection.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgCallerIdATCmd 1.3.6.1.4.1.244.1.1.4.2.2.2.1.60
The modem AT command required to initiate caller id logging by the modem.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgDODAuth 1.3.6.1.4.1.244.1.1.4.2.2.2.1.61
For PPP connections that are configured for both Dial-in and Dial-on-Demand, the type of authentication to be used for Dial-on-Demand.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pap(1), chap(2)  

slcDevPortCfgDODCHAPHost 1.3.6.1.4.1.244.1.1.4.2.2.2.1.62
For PPP connections that are configured for both Dial-in and Dial-on-Demand, with CHAP authentication for Dial-on-Demand, the host (for Unix) or user (for Windows) to use.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgSLMLoggingState 1.3.6.1.4.1.244.1.1.4.2.2.2.1.63
If enabled, SLM logging is enabled for the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgSLMNMS 1.3.6.1.4.1.244.1.1.4.2.2.2.1.64
The IP Addresses of up to three SNMP Network Management Stations defined used for SLM Logging. Multiple IP Addresses will be separated by a comma.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgSLMByteThresh 1.3.6.1.4.1.244.1.1.4.2.2.2.1.65
The number of bytes required to trigger SLM logging.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgSLMTimeFrame 1.3.6.1.4.1.244.1.1.4.2.2.2.1.66
The time frame for SLM logging, in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgWebColumns 1.3.6.1.4.1.244.1.1.4.2.2.2.1.67
The number of columns in the Web SSH or Telnet window for this Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgWebRows 1.3.6.1.4.1.244.1.1.4.2.2.2.1.68
The number of rows in the Web SSH or Telnet window for this Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgSyslogState 1.3.6.1.4.1.244.1.1.4.2.2.2.1.69
If enabled, Syslog logging is enabled for the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgHostList 1.3.6.1.4.1.244.1.1.4.2.2.2.1.70
When slcDevPortCfgModemState is set to dialinHostList, the name of the Host List used for Dial-in.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgDevLowTemp 1.3.6.1.4.1.244.1.1.4.2.2.2.1.71
The low temperature limit, in Celsius, for the device connected to this Device Port. If the temperature is not applicable, 9999 will be returned.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgDevHighTemp 1.3.6.1.4.1.244.1.1.4.2.2.2.1.72
The high temperature limit, in Celsius, for the device connected to this Device Port. If the temperature is not applicable, 9999 will be returned.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgDevTemperature 1.3.6.1.4.1.244.1.1.4.2.2.2.1.73
The actual temperature, in Celsius, for the device connected to this Device Port. If the temperature is not applicable, an empty string will be returned.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgDevLowHumidity 1.3.6.1.4.1.244.1.1.4.2.2.2.1.74
The low humidty limit, in percentage, for the device connected to this Device Port. If the temperature is not applicable, 9999 will be returned.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgDevHighHumidity 1.3.6.1.4.1.244.1.1.4.2.2.2.1.75
The high humidty limit, in percentage, for the device connected to this Device Port. If the temperature is not applicable, 9999 will be returned.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgDevHumidity 1.3.6.1.4.1.244.1.1.4.2.2.2.1.76
The actual humidity, in percentage, for the device connected to this Device Port. If the temperature is not applicable, an empty string will be returned.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgDevTraps 1.3.6.1.4.1.244.1.1.4.2.2.2.1.77
If enabled, traps will be sent when one of the limits for the device connected to this Device Port are exceeded.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgShowLines 1.3.6.1.4.1.244.1.1.4.2.2.2.1.78
If enabled, upon connecting to the Device Port, a series of characters (or lines) output to the Device Port before it was connected to are displayed.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgNumberShowLines 1.3.6.1.4.1.244.1.1.4.2.2.2.1.79
If slcDevPortCfgShowLines is enabled, the number of lines that are displayed upon connecting to the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

slcDevPortCfgViewPortLog 1.3.6.1.4.1.244.1.1.4.2.2.2.1.80
If enabled, upon using 'connect direct' to a Device Port, the slcDevPortCfgPortLogSeq key sequence can be typed to view the end of the port log for the current Device Port, or a different Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgPortLogSeq 1.3.6.1.4.1.244.1.1.4.2.2.2.1.81
The character sequence to view the port log for the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgMaxDirectConnects 1.3.6.1.4.1.244.1.1.4.2.2.2.1.82
The maximum number of direct connects at the CLI for the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgTelnetTimeout 1.3.6.1.4.1.244.1.1.4.2.2.2.1.83
The timeout (in seconds) for Telnet connections. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1800  

slcDevPortCfgSSHTimeout 1.3.6.1.4.1.244.1.1.4.2.2.2.1.84
The timeout (in seconds) for SSH connections. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1800  

slcDevPortCfgTCPTimeout 1.3.6.1.4.1.244.1.1.4.2.2.2.1.85
The timeout (in seconds) for TCP connections. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1800  

slcDevPortCfgCBCPClientType 1.3.6.1.4.1.244.1.1.4.2.2.2.1.86
When slcDevPortCfgModemState is set to cbcpClient, the preferred type of dialback number to use for CBCP negotiation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER adminDefined(1), userDefined(2)  

slcDevPortCfgCBCPServerAllowNoCallback 1.3.6.1.4.1.244.1.1.4.2.2.2.1.87
If enabled and slcDevPortCfgModemState is set to cbcpServer, the SLC will allow the PPP peer to select the No Callback option during CBCP negotiation.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgDialbackDelay 1.3.6.1.4.1.244.1.1.4.2.2.2.1.88
When slcDevPortCfgModemState is set to dialback or cbcpServer, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgUSBState 1.3.6.1.4.1.244.1.1.4.2.2.2.1.89
If enabled, USB logging is enabled for the Device Port. This value will be undefined if the SLC does not have USB Ports.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgUSBLogTo 1.3.6.1.4.1.244.1.1.4.2.2.2.1.90
For USB logging, which USB port to use for logging. This value will be undefined if the SLC does not have USB Ports.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgUSBMaxFiles 1.3.6.1.4.1.244.1.1.4.2.2.2.1.91
The maximum number of files to use for USB logging. This value will be undefined if the SLC does not have USB Ports.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgUSBMaxSize 1.3.6.1.4.1.244.1.1.4.2.2.2.1.92
The maximum size of each file (in bytes) for USB logging. This value will be undefined if the SLC does not have USB Ports.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgCHAPAuthLocalUsers 1.3.6.1.4.1.244.1.1.4.2.2.2.1.93
If enabled, the local user list (login and password) is used to validate the CHAP host and secret sent by a remote PPP peer for CHAP authentication, instead of using the CHAP host and secret associated with a modem.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgUseSites 1.3.6.1.4.1.244.1.1.4.2.2.2.1.94
If enabled, sites (a set of site-oriented modem parameters that can be activated by various modem-related events such as authentication, outbound traffic for Dial-on-demand connections, etc.) will be used instead of the parameters configured for the modem.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgDialbackRetries 1.3.6.1.4.1.244.1.1.4.2.2.2.1.95
When slcDevPortCfgModemState is set to dialback or cbcpServer, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt to dial-out fails.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgGroup 1.3.6.1.4.1.244.1.1.4.2.2.2.1.96
The group or groups that may access the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgIPMask 1.3.6.1.4.1.244.1.1.4.2.2.2.1.97
The network mask associated with slcDevPortCfgIPMask.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcDevPortCfgDevPrompt 1.3.6.1.4.1.244.1.1.4.2.2.2.1.98
If the device port is connected to a SLP or ServerTech CDU, specifies the prompt that is configured for the SLP or ServerTech CDU. This object is deprecated, and has been replaced by the RPM functionality.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgDevNumOutlets 1.3.6.1.4.1.244.1.1.4.2.2.2.1.99
If the device port is connected to a ServerTech CDU, specifies the number of outlets on the primary/master ServerTech unit. This object is deprecated, and has been replaced by the RPM functionality.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgDevNumExpOutlets 1.3.6.1.4.1.244.1.1.4.2.2.2.1.100
If the device port is connected to a ServerTech CDU, specifies the number of outlets on the expansion ServerTech unit. This object is deprecated, and has been replaced by the RPM functionality.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortCfgReversePinout 1.3.6.1.4.1.244.1.1.4.2.2.2.1.101
If enabled, swaps the positions of the serial lines, such that the direction of data or the signal is reversed. For instance, TX is swapped with RX. Enabling Reverse Pinout facilitates connections to Cisco and Sun style RS-45 console ports using a straight through Ethernet patch cable, without the need for a rolled cable or adapter. Note that all Lantronix serial adapters are intended to be used with Reverse Pinout disabled.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgUSBVBUS 1.3.6.1.4.1.244.1.1.4.2.2.2.1.102
For SLC8000 USB Device Ports only. If enabled, the USB VBUS signal provides power to the USB device attached to a device port. Disabling VBUS will power down the device as long as it is bus-powered instead of self-powered.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgAssertDTR 1.3.6.1.4.1.244.1.1.4.2.2.2.1.103
For RJ45 Device Ports only. By default, DTR is asserted on a device port nearly all of the time (except momentarily when a port is opened for operations). Unchecking this option will deassert DTR, simulating a cable disconnection for the device that is connected to a device port.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgPortType 1.3.6.1.4.1.244.1.1.4.2.2.2.1.104
Indicates the connector type on the device port: RJ45 or USB.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER rj45(1), usb(2)  

slcDevPortCfgTelnetTimeoutDataDirection 1.3.6.1.4.1.244.1.1.4.2.2.2.1.105
If slcDevPortCfgTelnetTimeout is enabled, this setting indicates the direction of data used to determine if the connection has timed out.
Status: current Access: read-only
OBJECT-TYPE    
  TimeoutDataDirection  

slcDevPortCfgSSHTimeoutDataDirection 1.3.6.1.4.1.244.1.1.4.2.2.2.1.106
If slcDevPortCfgSSHTimeout is enabled, this setting indicates the direction of data used to determine if the connection has timed out.
Status: current Access: read-only
OBJECT-TYPE    
  TimeoutDataDirection  

slcDevPortCfgTCPTimeoutDataDirection 1.3.6.1.4.1.244.1.1.4.2.2.2.1.107
If slcDevPortCfgTCPTimeout is enabled, this setting indicates the direction of data used to determine if the connection has timed out.
Status: current Access: read-only
OBJECT-TYPE    
  TimeoutDataDirection  

slcDevPortCfgIdleTimeoutMessage 1.3.6.1.4.1.244.1.1.4.2.2.2.1.108
If enabled, a message will be displayed to a user when their connection to a device port will be terminated soon due to the connection being idle.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgNumberOfSessionsMessage 1.3.6.1.4.1.244.1.1.4.2.2.2.1.109
If enabled, a message will be displayed to a user when connecting to a device port that indicates how many users are currently connected to the device port.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgMinimizeLatency 1.3.6.1.4.1.244.1.1.4.2.2.2.1.110
If enabled, device port latency will be minimized by reducing read delays.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgTelnetSoftIAC 1.3.6.1.4.1.244.1.1.4.2.2.2.1.111
If enabled, the Telnet server will not block waiting for the initial Telnet protocol IAC option responses.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgSendTermString 1.3.6.1.4.1.244.1.1.4.2.2.2.1.112
If enabled, and a slcDevPortCfgTerminationString is defined, when a network connection to a device port is terminated, the termination string is sent to the device connected to the device port. The string should be defined so that it sends the the appropriate command(s) to the device to terminate any active user sessions.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgTerminationString 1.3.6.1.4.1.244.1.1.4.2.2.2.1.113
The termination string sent to the device connected to the device port if slcDevPortCfgSendTermString is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgPowerManagementSeq 1.3.6.1.4.1.244.1.1.4.2.2.2.1.114
The key sequence that displays the Power Management menu when a user is connected to a device port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgPowerSupplies 1.3.6.1.4.1.244.1.1.4.2.2.2.1.115
A string that describes the managed power supplies configured for the device port. A device port can have up to four power supplies that provide power for the device connected to the device port. The string is a comma separated list of power supplies formatted: '(RPM Id/Outlet Id)'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgToggleDTR 1.3.6.1.4.1.244.1.1.4.2.2.2.1.116
Applies to RJ45 device ports only. If enabled, when a user disconnects from a device port, DTR will be toggled. This feature can be used when a serial connection requires DSR to be active for the attached device to connect. In this case, toggling DTR will end any active connection on the device.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortCfgTokenAction 1.3.6.1.4.1.244.1.1.4.2.2.2.1.117
For Token and Data Detection, a string containing one or more actions that will be performed if a data trigger occurs: syslog, email, trap, sendstring, powersupply.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgTokenSendString 1.3.6.1.4.1.244.1.1.4.2.2.2.1.118
For Token and Data Detection (previously called 'Email Logging'), if the Send String action is enabled, this object defines the string to send to the device connected to the device port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgTokenPowerSupply 1.3.6.1.4.1.244.1.1.4.2.2.2.1.119
For Token and Data Detection (previously called 'Email Logging'), if the Control Power Supply action is enabled, this object defines the name of the managed power supply to perform an action on. This string can be 'all' for all managed power supplies associated with the device port, or an individual power supply name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortCfgTokenPowerAction 1.3.6.1.4.1.244.1.1.4.2.2.2.1.120
For Token and Data Detection (previously called 'Email Logging'), if the Control Power Supply action is enabled, this object defines the action to take on slcDevPortCfgTokenPowerSupply.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER turnOff(1), turnOn(2), cyclePower(3)  

slcDevPortState 1.3.6.1.4.1.244.1.1.4.2.3
OBJECT IDENTIFIER    

slcDevPortStateNumber 1.3.6.1.4.1.244.1.1.4.2.3.1
The number of entries in the Device Port State table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 8 | 16 | 24 | 32 | 40 | 48  

slcDevPortStateTable 1.3.6.1.4.1.244.1.1.4.2.3.2
Table of Device Port state entries. The number of entries is given by the value of slcDevPortStateNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcDevPortStateEntry

slcDevPortStateEntry 1.3.6.1.4.1.244.1.1.4.2.3.2.1
An entry containing all state information for a Device Port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcDevPortStateEntry  

slcDevPortStateIndex 1.3.6.1.4.1.244.1.1.4.2.3.2.1.1
Reference index for each Device Port State entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..48  

slcDevPortStateBytesInput 1.3.6.1.4.1.244.1.1.4.2.3.2.1.2
The number of bytes input to the Device Port since boot or the last time Device Port statistics were zeroed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortStateBytesOutput 1.3.6.1.4.1.244.1.1.4.2.3.2.1.3
The number of bytes output from the Device Port since boot or the last time Device Port statistics were zeroed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortStateFramingErrors 1.3.6.1.4.1.244.1.1.4.2.3.2.1.4
The number of framing errors for the Device Port since boot or the last time Device Port statistics were zeroed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortStateParityErrors 1.3.6.1.4.1.244.1.1.4.2.3.2.1.5
The number of parity errors for the Device Port since boot or the last time Device Port statistics were zeroed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortStateOverrunErrors 1.3.6.1.4.1.244.1.1.4.2.3.2.1.6
The number of overrun errors for the Device Port since boot or the last time Device Port statistics were zeroed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortStateFlowControlViolations 1.3.6.1.4.1.244.1.1.4.2.3.2.1.7
The number of flow control violations for the Device Port since boot or the last time Device Port statistics were zeroed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortStateDSR 1.3.6.1.4.1.244.1.1.4.2.3.2.1.8
If enabled, Data Set Ready is enabled for the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortStateDTR 1.3.6.1.4.1.244.1.1.4.2.3.2.1.9
If enabled, Data Terminal Ready is enabled for the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortStateCTS 1.3.6.1.4.1.244.1.1.4.2.3.2.1.10
If enabled, Clear To Send is enabled for the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortStateRTS 1.3.6.1.4.1.244.1.1.4.2.3.2.1.11
If enabled, Request To Send is enabled for the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPortStateCD 1.3.6.1.4.1.244.1.1.4.2.3.2.1.12
If enabled, Carrier Detect is enabled for the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevPCCard 1.3.6.1.4.1.244.1.1.4.3
OBJECT IDENTIFIER    

slcPCCardCfgTable 1.3.6.1.4.1.244.1.1.4.3.1
Table of PC Card configuration entries. There are two entries in the table, index (1) for the upper PC Card slot, and index (2) for the lower PC Card slot. This table will be empty if the SLC does not have PC Card slots.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcPCCardCfgEntry

slcPCCardCfgEntry 1.3.6.1.4.1.244.1.1.4.3.1.1
An entry containing all configuration settings for a PC Card Slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcPCCardCfgEntry  

slcPCCardCfgIndex 1.3.6.1.4.1.244.1.1.4.3.1.1.1
Reference index for each PC Card Configuration entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2  

slcPCCardCfgCardType 1.3.6.1.4.1.244.1.1.4.3.1.1.2
The type of PC Card in the slot.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), storage(2), modem(3), isdn(4), wireless(5), gsmmodem(6)  

slcPCCardCfgCardId 1.3.6.1.4.1.244.1.1.4.3.1.1.3
The identifying string of the card in the slot.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcPCCardCfgBaud 1.3.6.1.4.1.244.1.1.4.3.1.1.4
For ISDN and modem cards, the baud rate.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200  

slcPCCardCfgDataBits 1.3.6.1.4.1.244.1.1.4.3.1.1.5
For ISDN and modem cards, the data bits.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 7 | 8  

slcPCCardCfgStopBits 1.3.6.1.4.1.244.1.1.4.3.1.1.6
For ISDN and modem cards, the stop bits.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1 | 2  

slcPCCardCfgParity 1.3.6.1.4.1.244.1.1.4.3.1.1.7
For ISDN and modem cards, the parity.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3)  

slcPCCardCfgFlowControl 1.3.6.1.4.1.244.1.1.4.3.1.1.8
For ISDN and modem cards, the flow control.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), xonxoff(2), rtscts(3)  

slcPCCardCfgModemState 1.3.6.1.4.1.244.1.1.4.3.1.1.9
For ISDN and modem cards, indicates how the modem will be used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), dialout(2), dialin(3), dialback(4), dialondemand(5), dialinAndDialondemand(6), dialinHostList(7), cbcpServer(8), cbcpClient(9)  

slcPCCardCfgModemMode 1.3.6.1.4.1.244.1.1.4.3.1.1.10
For ISDN and modem cards, the mode: PPP (for Dial-in and Dial-out) and text (for Dial-in and Dial-back).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ppp(1), text(2)  

slcPCCardCfgLocalIP 1.3.6.1.4.1.244.1.1.4.3.1.1.11
For PPP connections, the local IP Address (all zeros if it should be negotiated).
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcPCCardCfgRemoteIP 1.3.6.1.4.1.244.1.1.4.3.1.1.12
For PPP connections, the remote IP Address (all zeros if it should be negotiated).
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcPCCardCfgAuth 1.3.6.1.4.1.244.1.1.4.3.1.1.13
For PPP connections, the type of authentication to be used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pap(1), chap(2)  

slcPCCardCfgCHAPHost 1.3.6.1.4.1.244.1.1.4.3.1.1.14
For PPP connections with CHAP authentication, the host (for Unix) or user (for Windows) to use.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcPCCardCfgInitScript 1.3.6.1.4.1.244.1.1.4.3.1.1.15
The initialization script for an external modem.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcPCCardCfgTimeout 1.3.6.1.4.1.244.1.1.4.3.1.1.16
The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..30  

slcPCCardCfgDialoutNum 1.3.6.1.4.1.244.1.1.4.3.1.1.17
The phone number to use for dial-out connections.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcPCCardCfgDialoutLogin 1.3.6.1.4.1.244.1.1.4.3.1.1.18
The login to use for dial-out connections.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

slcPCCardCfgDialbackMode 1.3.6.1.4.1.244.1.1.4.3.1.1.19
For dial-back connections, defines the phone number to call: a number associated with the authenticated user, or a fixed number associated with the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER usernumber(1), fixed(2)  

slcPCCardCfgDialbackNum 1.3.6.1.4.1.244.1.1.4.3.1.1.20
The phone number to use for dial-back connections.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcPCCardCfgNATState 1.3.6.1.4.1.244.1.1.4.3.1.1.21
If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcPCCardCfgStorageFS 1.3.6.1.4.1.244.1.1.4.3.1.1.22
For storage cards, the type of filesystem on the card.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notmounted(1), ext2(2), fat(3)  

slcPCCardCfgISDNChannel 1.3.6.1.4.1.244.1.1.4.3.1.1.23
The channel on the ISDN card to use, either 1 or 2.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcPCCardCfgISDNChannelNum 1.3.6.1.4.1.244.1.1.4.3.1.1.24
The phone number associated with the selected ISDN channel.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcPCCardCfgTelnetState 1.3.6.1.4.1.244.1.1.4.3.1.1.25
If enabled, Telnet connections to the modem/ISDN PC Card are allowed.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcPCCardCfgTelnetPort 1.3.6.1.4.1.244.1.1.4.3.1.1.26
TCP Port number for Telnet connections directly to the modem/ISDN PC Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1025..65535  

slcPCCardCfgTelnetAuth 1.3.6.1.4.1.244.1.1.4.3.1.1.27
If enabled, the user is required to authenticate to access the modem/ISDN PC Card with Telnet.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcPCCardCfgSSHState 1.3.6.1.4.1.244.1.1.4.3.1.1.28
If enabled, SSH connections to the modem/ISDN PC Card are allowed.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcPCCardCfgSSHPort 1.3.6.1.4.1.244.1.1.4.3.1.1.29
TCP Port number for SSH connections directly to the modem/ISDN PC Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1025..65535  

slcPCCardCfgSSHAuth 1.3.6.1.4.1.244.1.1.4.3.1.1.30
If enabled, the user is required to authenticate to access the modem/ISDN PC Card with SSH.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcPCCardCfgTCPState 1.3.6.1.4.1.244.1.1.4.3.1.1.31
If enabled, TCP connections to the modem/ISDN PC Card are allowed.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcPCCardCfgTCPPort 1.3.6.1.4.1.244.1.1.4.3.1.1.32
TCP Port number for TCP connections directly to the modem/ISDN PC Card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1025..65535  

slcPCCardCfgTCPAuth 1.3.6.1.4.1.244.1.1.4.3.1.1.33
If enabled, the user is required to authenticate to access the modem/ISDN PC Card with TCP.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcPCCardCfgGSMPIN 1.3.6.1.4.1.244.1.1.4.3.1.1.34
The PIN associated with the GSM/GPRS PC Card modem.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcPCCardCfgGSMNetworkName 1.3.6.1.4.1.244.1.1.4.3.1.1.35
The Network Name associated with the GSM/GPRS PC Card modem.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcPCCardCfgGSMPPPCompression 1.3.6.1.4.1.244.1.1.4.3.1.1.36
If enabled, PPP compression is enabled for GSM/GPRS PC Card modem connections.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcPCCardCfgGSMAutoAcquireDNS 1.3.6.1.4.1.244.1.1.4.3.1.1.37
If enabled, DNS servers will be acquired vi GSM/GPRS PC Card modem PPP connections.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcPCCardCfgGSMDialoutMode 1.3.6.1.4.1.244.1.1.4.3.1.1.38
The mode to be used for GSM/GPRS PC Card modems configured for dialout.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER gprs(1), gsm(2)  

slcPCCardCfgGSMContextID 1.3.6.1.4.1.244.1.1.4.3.1.1.39
The Context Id string used for GSM/GPRS PC Card modems configured for GPRS dialout mode.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcPCCardCfgGSMBearerService 1.3.6.1.4.1.244.1.1.4.3.1.1.40
The Bearer Service Type string used for GSM/GPRS PC Card modems configured for GSM dialin/dialout mode.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcPCCardCfgIdleTimeout 1.3.6.1.4.1.244.1.1.4.3.1.1.41
The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP connection will be terminated. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcPCCardCfgRestartDelay 1.3.6.1.4.1.244.1.1.4.3.1.1.42
The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcPCCardCfgCallerIdLogging 1.3.6.1.4.1.244.1.1.4.3.1.1.43
If enabled, caller id logging is enabled for a modem dial-in connection.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcPCCardCfgCallerIdATCmd 1.3.6.1.4.1.244.1.1.4.3.1.1.44
The modem AT command required to initiate caller id logging by the modem.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcPCCardCfgDODAuth 1.3.6.1.4.1.244.1.1.4.3.1.1.45
For PPP connections that are configured for both Dial-in and Dial-on-Demand, the type of authentication to be used for Dial-on-Demand.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pap(1), chap(2)  

slcPCCardCfgDODCHAPHost 1.3.6.1.4.1.244.1.1.4.3.1.1.46
For PPP connections that are configured for both Dial-in and Dial-on-Demand, with CHAP authentication for Dial-on-Demand, the host (for Unix) or user (for Windows) to use.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcPCCardCfgHostList 1.3.6.1.4.1.244.1.1.4.3.1.1.47
When slcPCCardCfgModemState is set to dialinHostList, the name of the Host List used for Dial-in.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcPCCardCfgCBCPClientType 1.3.6.1.4.1.244.1.1.4.3.1.1.48
When slcPCCardCfgModemState is set to cbcpClient, the preferred type of dialback number to use for CBCP negotiation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER adminDefined(1), userDefined(2)  

slcPCCardCfgCBCPServerAllowNoCallback 1.3.6.1.4.1.244.1.1.4.3.1.1.49
If enabled and slcPCCardCfgModemState is set to cbcpServer, the SLC will allow the PPP peer to select the No Callback option during CBCP negotiation.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcPCCardCfgDialbackDelay 1.3.6.1.4.1.244.1.1.4.3.1.1.50
When slcPCCardCfgModemState is set to dialback or cbcpServer, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcPCCardCfgCHAPAuthLocalUsers 1.3.6.1.4.1.244.1.1.4.3.1.1.51
If enabled, the local user list (login and password) is used to validate the CHAP host and secret sent by a remote PPP peer for CHAP authentication, instead of using the CHAP host and secret associated with a modem.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcPCCardCfgUseSites 1.3.6.1.4.1.244.1.1.4.3.1.1.52
If enabled, sites (a set of site-oriented modem parameters that can be activated by various modem-related events such as authentication, outbound traffic for Dial-on-demand connections, etc.) will be used instead of the parameters configured for the modem.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcPCCardCfgDialbackRetries 1.3.6.1.4.1.244.1.1.4.3.1.1.53
When slcPCCardCfgModemState is set to dialback or cbcpServer, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt to dial-out fails.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcPCCardCfgGroup 1.3.6.1.4.1.244.1.1.4.3.1.1.54
The group or groups that may access the PC Card slot.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPowerSupply 1.3.6.1.4.1.244.1.1.4.4
OBJECT IDENTIFIER    

slcDevPowerSupplyType 1.3.6.1.4.1.244.1.1.4.4.1
The type of power supply for the SLC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER acOnePowerSupply(1), acTwoPowerSupplies(2), dcTwoPowerSupplies(3)  

slcDevPowerSupplyA 1.3.6.1.4.1.244.1.1.4.4.2
The status of Power Supply A.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

slcDevPowerSupplyB 1.3.6.1.4.1.244.1.1.4.4.3
The status of Power Supply B.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), notInstalled(3)  

slcDevUSB 1.3.6.1.4.1.244.1.1.4.5
OBJECT IDENTIFIER    

slcDevUSBState 1.3.6.1.4.1.244.1.1.4.5.1
If enabled, the USB devices connected to the SLC will be accessible. This value will be undefined if the SLC does not have USB Ports.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevUSBCfgTable 1.3.6.1.4.1.244.1.1.4.5.2
Table of USB configuration entries. There is one entry in the table, index (1) for USB port 1. This table will be empty if the SLC does not have USB Ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcDevUSBCfgEntry

slcDevUSBCfgEntry 1.3.6.1.4.1.244.1.1.4.5.2.1
An entry containing all configuration settings for a USB port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcDevUSBCfgEntry  

slcDevUSBId 1.3.6.1.4.1.244.1.1.4.5.2.1.1
The identifier for a USB Port (1 indicates USB Port U1).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1  

slcDevUSBCfgCardType 1.3.6.1.4.1.244.1.1.4.5.2.1.2
The type of USB device in the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), storage(2), modem(3), isdn(4), wireless(5), gsmmodem(6)  

slcDevUSBCfgCardId 1.3.6.1.4.1.244.1.1.4.5.2.1.3
The identifying string of the device in the port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevUSBCfgStorageFS 1.3.6.1.4.1.244.1.1.4.5.2.1.4
For thumb drives, the type of filesystem on the card.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notmounted(1), ext2(2), fat(3)  

slcDevUSBCfgBaud 1.3.6.1.4.1.244.1.1.4.5.2.1.5
For modem cards, the baud rate.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200  

slcDevUSBCfgDataBits 1.3.6.1.4.1.244.1.1.4.5.2.1.6
For modem cards, the data bits.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 7 | 8  

slcDevUSBCfgStopBits 1.3.6.1.4.1.244.1.1.4.5.2.1.7
For modem cards, the stop bits.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1 | 2  

slcDevUSBCfgParity 1.3.6.1.4.1.244.1.1.4.5.2.1.8
For modem cards, the parity.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3)  

slcDevUSBCfgFlowControl 1.3.6.1.4.1.244.1.1.4.5.2.1.9
For modem cards, the flow control.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), xonxoff(2), rtscts(3)  

slcDevUSBCfgModemState 1.3.6.1.4.1.244.1.1.4.5.2.1.10
For modem cards, indicates how the modem will be used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), dialout(2), dialin(3), dialback(4), dialondemand(5), dialinAndDialondemand(6), dialinHostList(7), cbcpServer(8), cbcpClient(9)  

slcDevUSBCfgModemMode 1.3.6.1.4.1.244.1.1.4.5.2.1.11
For modem cards, the mode: PPP (for Dial-in and Dial-out) and text (for Dial-in and Dial-back).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ppp(1), text(2)  

slcDevUSBCfgLocalIP 1.3.6.1.4.1.244.1.1.4.5.2.1.12
For PPP connections, the local IP Address (all zeros if it should be negotiated).
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcDevUSBCfgRemoteIP 1.3.6.1.4.1.244.1.1.4.5.2.1.13
For PPP connections, the remote IP Address (all zeros if it should be negotiated).
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcDevUSBCfgAuth 1.3.6.1.4.1.244.1.1.4.5.2.1.14
For PPP connections, the type of authentication to be used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pap(1), chap(2)  

slcDevUSBCfgCHAPHost 1.3.6.1.4.1.244.1.1.4.5.2.1.15
For PPP connections with CHAP authentication, the host (for Unix) or user (for Windows) to use.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevUSBCfgDODAuth 1.3.6.1.4.1.244.1.1.4.5.2.1.16
For PPP connections that are configured for both Dial-in and Dial-on-Demand, the type of authentication to be used for Dial-on-Demand.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pap(1), chap(2)  

slcDevUSBCfgDODCHAPHost 1.3.6.1.4.1.244.1.1.4.5.2.1.17
For PPP connections that are configured for both Dial-in and Dial-on-Demand, with CHAP authentication for Dial-on-Demand, the host (for Unix) or user (for Windows) to use.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevUSBCfgInitScript 1.3.6.1.4.1.244.1.1.4.5.2.1.18
The initialization script for a modem.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevUSBCfgTimeout 1.3.6.1.4.1.244.1.1.4.5.2.1.19
The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..30  

slcDevUSBCfgDialoutNum 1.3.6.1.4.1.244.1.1.4.5.2.1.20
The phone number to use for dial-out connections.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevUSBCfgDialoutLogin 1.3.6.1.4.1.244.1.1.4.5.2.1.21
The login to use for dial-out connections.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

slcDevUSBCfgDialbackMode 1.3.6.1.4.1.244.1.1.4.5.2.1.22
For dial-back connections, defines the phone number to call: a number associated with the authenticated user, or a fixed number associated with the Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER usernumber(1), fixed(2)  

slcDevUSBCfgDialbackNum 1.3.6.1.4.1.244.1.1.4.5.2.1.23
The phone number to use for dial-back connections.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevUSBCfgDialbackDelay 1.3.6.1.4.1.244.1.1.4.5.2.1.24
When slcDevUSBCfgModemState is set to dialback or cbcpServer, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevUSBCfgNATState 1.3.6.1.4.1.244.1.1.4.5.2.1.25
If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevUSBCfgIdleTimeout 1.3.6.1.4.1.244.1.1.4.5.2.1.26
The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP connection will be terminated. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevUSBCfgRestartDelay 1.3.6.1.4.1.244.1.1.4.5.2.1.27
The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevUSBCfgCallerIdLogging 1.3.6.1.4.1.244.1.1.4.5.2.1.28
If enabled, caller id logging is enabled for a modem dial-in connection.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevUSBCfgCallerIdATCmd 1.3.6.1.4.1.244.1.1.4.5.2.1.29
The modem AT command required to initiate caller id logging by the modem.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevUSBCfgHostList 1.3.6.1.4.1.244.1.1.4.5.2.1.30
When slcDevUSBCfgModemState is set to dialinHostList, the name of the Host List used for Dial-in.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevUSBCfgCBCPClientType 1.3.6.1.4.1.244.1.1.4.5.2.1.31
When slcDevUSBCfgModemState is set to cbcpClient, the preferred type of dialback number to use for CBCP negotiation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER adminDefined(1), userDefined(2)  

slcDevUSBCfgCBCPServerAllowNoCallback 1.3.6.1.4.1.244.1.1.4.5.2.1.32
If enabled and slcDevUSBCfgModemState is set to cbcpServer, the SLC will allow the PPP peer to select the No Callback option during CBCP negotiation.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevUSBCfgTelnetState 1.3.6.1.4.1.244.1.1.4.5.2.1.33
If enabled, Telnet connections to the USB modem are allowed.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevUSBCfgTelnetPort 1.3.6.1.4.1.244.1.1.4.5.2.1.34
TCP Port number for Telnet connections directly to the USB modem.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1025..65535  

slcDevUSBCfgTelnetAuth 1.3.6.1.4.1.244.1.1.4.5.2.1.35
If enabled, the user is required to authenticate to access the USB modem with Telnet.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevUSBCfgSSHState 1.3.6.1.4.1.244.1.1.4.5.2.1.36
If enabled, SSH connections to the USB modem are allowed.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevUSBCfgSSHPort 1.3.6.1.4.1.244.1.1.4.5.2.1.37
TCP Port number for SSH connections directly to the USB modem.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1025..65535  

slcDevUSBCfgSSHAuth 1.3.6.1.4.1.244.1.1.4.5.2.1.38
If enabled, the user is required to authenticate to access the USB modem with SSH.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevUSBCfgTCPState 1.3.6.1.4.1.244.1.1.4.5.2.1.39
If enabled, TCP connections to the USB modem are allowed.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevUSBCfgTCPPort 1.3.6.1.4.1.244.1.1.4.5.2.1.40
TCP Port number for TCP connections directly to the USB modem.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1025..65535  

slcDevUSBCfgTCPAuth 1.3.6.1.4.1.244.1.1.4.5.2.1.41
If enabled, the user is required to authenticate to access the USB modem with TCP.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevUSBCfgGSMPIN 1.3.6.1.4.1.244.1.1.4.5.2.1.42
The PIN associated with the GSM/GPRS modem.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevUSBCfgGSMPPPCompression 1.3.6.1.4.1.244.1.1.4.5.2.1.43
If enabled, PPP compression is enabled GSM/GPRS modem connections.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevUSBCfgGSMAutoAcquireDNS 1.3.6.1.4.1.244.1.1.4.5.2.1.44
If enabled, DNS servers will be acquired vi GSM/GPRS modem PPP connections.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevUSBCfgGSMDialoutMode 1.3.6.1.4.1.244.1.1.4.5.2.1.45
The mode to be used for GSM/GPRS modems configured for dialout.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER gprs(1), gsm(2)  

slcDevUSBCfgGSMContextID 1.3.6.1.4.1.244.1.1.4.5.2.1.46
The Context Id string used for GSM/GPRS modems configured for GPRS dialout mode.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevUSBCfgGSMBearerService 1.3.6.1.4.1.244.1.1.4.5.2.1.47
The Bearer Service Type string used for GSM/GPRS modems configured for GSM dialin/dialout mode.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevUSBCfgCHAPAuthLocalUsers 1.3.6.1.4.1.244.1.1.4.5.2.1.48
If enabled, the local user list (login and password) is used to validate the CHAP host and secret sent by a remote PPP peer for CHAP authentication, instead of using the CHAP host and secret associated with a modem.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevUSBCfgUseSites 1.3.6.1.4.1.244.1.1.4.5.2.1.49
If enabled, sites (a set of site-oriented modem parameters that can be activated by various modem-related events such as authentication, outbound traffic for Dial-on-demand connections, etc.) will be used instead of the parameters configured for the modem.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevUSBCfgDialbackRetries 1.3.6.1.4.1.244.1.1.4.5.2.1.50
When slcDevUSBCfgModemState is set to dialback or cbcpServer, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt to dial-out fails.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevUSBCfgDialtoneCheck 1.3.6.1.4.1.244.1.1.4.5.2.1.51
The time (in minutes) between checks for a modem dialtone. A value of 0 indicates that dialtone checks are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..600  

slcDevUSBCfgGroup 1.3.6.1.4.1.244.1.1.4.5.2.1.52
The group or groups that may access the USB port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevIntModem 1.3.6.1.4.1.244.1.1.4.6
OBJECT IDENTIFIER    

slcDevIntModemModemState 1.3.6.1.4.1.244.1.1.4.6.1
For the SLC internal modem, indicates how the modem will be used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), dialout(2), dialin(3), dialback(4)  

slcDevIntModemModemMode 1.3.6.1.4.1.244.1.1.4.6.2
For the SLC internal modem, the mode: PPP (for Dial-in and Dial-out) and text (for Dial-in and Dial-back).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ppp(1), text(2)  

slcDevIntModemLocalIP 1.3.6.1.4.1.244.1.1.4.6.3
For PPP connections, the local IP Address - all zeros if it should be negotiated.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcDevIntModemRemoteIP 1.3.6.1.4.1.244.1.1.4.6.4
For PPP connections, the remote IP Address - all zeros if it should be negotiated.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcDevIntModemAuth 1.3.6.1.4.1.244.1.1.4.6.5
For PPP connections, the type of authentication to be used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pap(1), chap(2)  

slcDevIntModemCHAPHost 1.3.6.1.4.1.244.1.1.4.6.6
For PPP connections with CHAP authentication, the host (for Unix) or user (for Windows) to use.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevIntModemInitScript 1.3.6.1.4.1.244.1.1.4.6.7
The initialization script for an internal modem.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevIntModemTimeout 1.3.6.1.4.1.244.1.1.4.6.8
The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..30  

slcDevIntModemDialoutNum 1.3.6.1.4.1.244.1.1.4.6.9
The phone number to use for dial-out connections.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevIntModemDialoutLogin 1.3.6.1.4.1.244.1.1.4.6.10
The login to use for dial-out connections.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

slcDevIntModemDialbackMode 1.3.6.1.4.1.244.1.1.4.6.11
For dial-back connections, defines the phone number to call: a number associated with the authenticated user, or a fixed number associated with the internal modem.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER usernumber(1), fixed(2)  

slcDevIntModemDialbackNum 1.3.6.1.4.1.244.1.1.4.6.12
The phone number to use for dial-back connections.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevIntModemDialbackRetries 1.3.6.1.4.1.244.1.1.4.6.13
When slcDevIntModemModemState is set to dialback, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt to dial-out fails.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevIntModemDialbackDelay 1.3.6.1.4.1.244.1.1.4.6.14
When slcDevIntModemModemState is set to dialback, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevIntModemCallerIdLogging 1.3.6.1.4.1.244.1.1.4.6.15
If enabled, caller id logging is enabled for a modem dial-in connection.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevIntModemCallerIdATCmd 1.3.6.1.4.1.244.1.1.4.6.16
The modem AT command required to initiate caller id logging by the modem.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevIntModemUseSites 1.3.6.1.4.1.244.1.1.4.6.17
If enabled, sites (a set of site-oriented modem parameters that can be activated by various modem-related events such as authentication, outbound traffic for Dial-on-demand connections, etc.) will be used instead of the parameters configured for the modem.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevIntModemGroup 1.3.6.1.4.1.244.1.1.4.6.18
The group or groups that may access the internal modem connection.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevIntModemIdleTimeout 1.3.6.1.4.1.244.1.1.4.6.19
The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP connection will be terminated. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevIntModemRestartDelay 1.3.6.1.4.1.244.1.1.4.6.20
The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevIntModemNATState 1.3.6.1.4.1.244.1.1.4.6.21
If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevIntModemDialtoneCheck 1.3.6.1.4.1.244.1.1.4.6.22
The time (in minutes) between checks for a modem dialtone. A value of 0 indicates that dialtone checks are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..600  

slcDevRPM 1.3.6.1.4.1.244.1.1.4.7
OBJECT IDENTIFIER    

slcDevRPMCfgTable 1.3.6.1.4.1.244.1.1.4.7.1
Table of RPM configuration entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcDevRPMCfgEntry

slcDevRPMCfgEntry 1.3.6.1.4.1.244.1.1.4.7.1.1
An entry containing all configuration settings for an RPM, as well as some top level status information for the RPM.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcDevRPMCfgEntry  

slcDevRPMId 1.3.6.1.4.1.244.1.1.4.7.1.1.1
The unique identifier for an RPM device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..100  

slcDevRPMName 1.3.6.1.4.1.244.1.1.4.7.1.1.2
The name of the RPM.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..20)  

slcDevRPMVendorModel 1.3.6.1.4.1.244.1.1.4.7.1.1.3
The manufacture and model of the RPM.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevRPMManagedVia 1.3.6.1.4.1.244.1.1.4.7.1.1.4
The method of control for managing the RPM.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER serial(1), network(2), snmp(3), usb(4)  

slcDevRPMIPAddress 1.3.6.1.4.1.244.1.1.4.7.1.1.5
For SNMP and network managed RPMs, the IP Address of the RPM.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcDevRPMPort 1.3.6.1.4.1.244.1.1.4.7.1.1.6
For network managed RPMs, the TCP port to use to connect to the RPM. For USB managed RPMs, the USB port the device is connected to (0 indicates a port on the front of the SLC). For serially managed RPMs, the RJ45 device port the device is connected to.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevRPMDriverOpts 1.3.6.1.4.1.244.1.1.4.7.1.1.7
Any driver options that are configured for the RPM. This option is mostly used for the USB vendor and product id.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevRPMStatus 1.3.6.1.4.1.244.1.1.4.7.1.1.8
The current status for the RPM; for example, 'OL' to indicate 'Online' for a UPS. This object may be blank if the device does not report a status, or if the device is not in an error state.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevRPMFirmwareVersion 1.3.6.1.4.1.244.1.1.4.7.1.1.9
The current firmware version of the RPM. This object may be blank if the device does not report its firmware version.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevRPMSerialNumber 1.3.6.1.4.1.244.1.1.4.7.1.1.10
The serial number of the RPM. This object may be blank if the device does not report its serial number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevRPMMACAddress 1.3.6.1.4.1.244.1.1.4.7.1.1.11
The hardware address of the ethernet port of the RPM. This object may be blank if the device does not report its MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevRPMNumOutlets 1.3.6.1.4.1.244.1.1.4.7.1.1.12
The number of power outlets that the RPM has.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..120  

slcDevRPMOutletsOn 1.3.6.1.4.1.244.1.1.4.7.1.1.13
The number of RPM outlets that are currently turned on. A negative value indicates that the RPM does not report how many outlets are turned on.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..120  

slcDevRPMSNMPReadComm 1.3.6.1.4.1.244.1.1.4.7.1.1.14
For SNMP managed RPMs, the SNMP read (get) community.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..20)  

slcDevRPMAdminLogin 1.3.6.1.4.1.244.1.1.4.7.1.1.15
For serial or network managed RPMs, the administrator login.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..20)  

slcDevRPMLogStatus 1.3.6.1.4.1.244.1.1.4.7.1.1.16
Indicates how frequently the status for the RPM is logged. A value of 0 indicates that logging is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..60  

slcDevRPMCriticalSNMPTraps 1.3.6.1.4.1.244.1.1.4.7.1.1.17
If enabled, indicates that the slcEventRPMAction trap will be sent for critical events for the RPM.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevRPMCriticalEmails 1.3.6.1.4.1.244.1.1.4.7.1.1.18
An email address to send emails to for critical events for the RPM.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevRPMProvidesSLCPower 1.3.6.1.4.1.244.1.1.4.7.1.1.19
If enabled, indicates that the RPM provides power to the SLC.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevRPMOnLowBattery 1.3.6.1.4.1.244.1.1.4.7.1.1.20
Indicates the action taken when a UPS is on battery and reaches a 'low battery' state. Applies to UPS devices only.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER shutdownThisUPS(1), shutdownAllUPS(2), allowBatteryToFail(3), shutdownSLCUPS(4)  

slcDevRPMShutdownOrder 1.3.6.1.4.1.244.1.1.4.7.1.1.21
If a UPS reaches a 'low battery' state and its slcDevRPMOnLowBattery setting is shutdownAllUPS, this indicates the order in which this RPM will be shutdown as all UPSes are shutdown. All UPSes with a shutdown order of '1' will be shutdown first, followed by all UPSes with a shutdown order of '2', etc. Shutdown orders are in the range of 1 to 49, with 50 being reserved for UPSes that provide power to the SLC - they will always be shutdown last. A value of 0 indicates that this UPS will not be shutdown. Applies to UPS devices only.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..50  

slcDevRPMLoad 1.3.6.1.4.1.244.1.1.4.7.1.1.22
The current load of the RPM expressed as a percentage. The value is in tenths of a percent. A negative value indicates that the RPM does not report load values.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..1000  

slcDevRPMLoadOverThreshold 1.3.6.1.4.1.244.1.1.4.7.1.1.23
The load when the RPM switches to an overload condition, expressed as a percentage. The value is in tenths of a percent. A negative value indicates that the RPM does not report over load threshold values.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..1000  

slcDevRPMBatteryCharge 1.3.6.1.4.1.244.1.1.4.7.1.1.24
The current battery charge for the the RPM, expressed as a percentage. The value is in tenths of a percent. A negative value indicates that the RPM does not report battery charge values.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..1000  

slcDevRPMBatteryRuntime 1.3.6.1.4.1.244.1.1.4.7.1.1.25
The number of seconds in the RPM remaining battery life. A value of 0 indicates that the RPM does not report battery runtime values.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

slcDevRPMBeeperStatus 1.3.6.1.4.1.244.1.1.4.7.1.1.26
If enabled, indicates that the RPM beeper is enabled. A value of 0 indicates that the RPM does not report beeper status.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcDevRPMTemperature 1.3.6.1.4.1.244.1.1.4.7.1.1.27
The internal temperature of the RPM, given in Celsius. A value of less than or equal to zero indicates that the RPM does not report temperature values.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevRPMUptime 1.3.6.1.4.1.244.1.1.4.7.1.1.28
The number of seconds the RPM has been up. A value of 0 indicates that the RPM does not report uptime values.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

slcDevRPMStatusTable 1.3.6.1.4.1.244.1.1.4.7.2
Table of RPM status entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcDevRPMStatusEntry

slcDevRPMStatusEntry 1.3.6.1.4.1.244.1.1.4.7.2.1
An entry containing status information for an RPM. The SLC supports up to two towers or units per RPM.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcDevRPMStatusEntry  

slcDevRPMCurrent 1.3.6.1.4.1.244.1.1.4.7.2.1.1
The total current level, in tenths of Amps, for all outlets, on a given RPM tower or unit. If the value is negative, the RPM does not report current for the tower or unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevRPMInputVoltage 1.3.6.1.4.1.244.1.1.4.7.2.1.2
The input voltage, in tenths of Volts, on a given RPM tower or unit. If the value is negative, the RPM does not report input voltage for the tower or unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevRPMApparentPower 1.3.6.1.4.1.244.1.1.4.7.2.1.3
The apparent power, in tenths of Volt-Amps, on a given RPM tower or unit. If the value is negative, the RPM does not report apparent power for the tower or unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevRPMNominalApparentPower 1.3.6.1.4.1.244.1.1.4.7.2.1.4
The nominal apparent power, in tenths of Volt-Amps, on a given RPM tower or unit. If the value is negative, the RPM does not report nominal apparent power for the tower or unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevRPMRealPower 1.3.6.1.4.1.244.1.1.4.7.2.1.5
The real power, in tenths of Watts, on a given RPM tower or unit. If the value is negative, the RPM does not report real power for the tower or unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevRPMNominalRealPower 1.3.6.1.4.1.244.1.1.4.7.2.1.6
The nominal real power, in tenths of Watts, on a given RPM tower or unit. If the value is negative, the RPM does not report nominal real power for the tower or unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevRPMOutletTable 1.3.6.1.4.1.244.1.1.4.7.3
Table of RPM outlet status and control entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcDevRPMOutletEntry

slcDevRPMOutletEntry 1.3.6.1.4.1.244.1.1.4.7.3.1
An entry containing status and control for outlets on an RPM.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcDevRPMOutletEntry  

slcDevRPMOutletName 1.3.6.1.4.1.244.1.1.4.7.3.1.1
The current name of the RPM outlet. This will be blank if the RPM device does not report outlet names.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevRPMOutletState 1.3.6.1.4.1.244.1.1.4.7.3.1.2
The current state of the RPM outlet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), off(2), on(3)  

slcDevRPMOutletCurrent 1.3.6.1.4.1.244.1.1.4.7.3.1.3
The current level, in tenths of Amps, for the RPM outlet. This will be negative if the RPM does not report current values for the outlet.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevRPMOutletAction 1.3.6.1.4.1.244.1.1.4.7.3.1.4
Performs an action to change the state of an outlet on an RPM. A read of this object always returns the value noAction(1). If the RPM supports individual outlet control, a command will be sent to the RPM to change the outlet state. Requests for invalid outlets or RPMs that do not support individual outlet control will return an error.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noAction(1), turnOff(2), turnOn(3), cyclePower(4)  

slcConnNumber 1.3.6.1.4.1.244.1.1.5.1
The number of entries in the Connections table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcConnTable 1.3.6.1.4.1.244.1.1.5.2
Table of connection entries. The number of entries is given by the value of slcConnNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlcConnEntry

slcConnEntry 1.3.6.1.4.1.244.1.1.5.2.1
An entry containing a connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlcConnEntry  

slcConnIndex 1.3.6.1.4.1.244.1.1.5.2.1.1
Reference index for each connection.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..512  

slcConnEndPt1 1.3.6.1.4.1.244.1.1.5.2.1.2
A description of one of the end points of the connection.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcConnEndPt2 1.3.6.1.4.1.244.1.1.5.2.1.3
A description of one of the end points of the connection.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcConnFlow 1.3.6.1.4.1.244.1.1.5.2.1.4
The direction that data is flowing in the connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER bidirectional(1), endpt1toendpt2(2), endpt2toendpt1(3)  

slcConnUser 1.3.6.1.4.1.244.1.1.5.2.1.5
The user that initiated the connection.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

slcConnDuration 1.3.6.1.4.1.244.1.1.5.2.1.6
The duration, in seconds, that the connection has existed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcConnDurationStr 1.3.6.1.4.1.244.1.1.5.2.1.7
The duration, formatted in hours:minutes:seconds, that the connection has existed.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcConnIdle 1.3.6.1.4.1.244.1.1.5.2.1.8
The amount of time that the connection has been idle, in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcConnIdleStr 1.3.6.1.4.1.244.1.1.5.2.1.9
The amount of time that the connection has been idle, formatted in hours:minutes:seconds.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcConnSourceIP 1.3.6.1.4.1.244.1.1.5.2.1.10
For network (Telnet and SSH) connections into the SLC, the source IP Address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcSystemModel 1.3.6.1.4.1.244.1.1.6.1
The model of the SLC: SLC8, SLC16, SLC32, SLC48, SLC8008, SLC8016, SLC8024, SLC8032, SLC8040, SLC8048.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcSystemSerialNo 1.3.6.1.4.1.244.1.1.6.2
The serial number of the SLC.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcSystemFWRev 1.3.6.1.4.1.244.1.1.6.3
The firmware version of the SLC.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcSystemLoadVia 1.3.6.1.4.1.244.1.1.6.4
The method used for firmware updates.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ftp(1), tftp(2), sftp(3), slm(4), https(5), nfs(6), pccard(7)  

slcSystemFTPServer 1.3.6.1.4.1.244.1.1.6.5
The IP Address of the FTP/TFTP server used for firmware updates, and for saving and restoring configurations.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slcSystemFTPPath 1.3.6.1.4.1.244.1.1.6.6
The path on the FTP server used for firmware updates, and for saving and restoring configurations.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcSystemKeypadLock 1.3.6.1.4.1.244.1.1.6.7
If enabled, the LCD keypad is locked for editing configuration. The keys can only be used to view settings.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcSystemTimeZone 1.3.6.1.4.1.244.1.1.6.8
The time zone of the SLC.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcSystemWelcomeBanner 1.3.6.1.4.1.244.1.1.6.9
The banner displayed before the login prompt.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcSystemLoginBanner 1.3.6.1.4.1.244.1.1.6.10
The banner displayed after successful login.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcSystemLogoutBanner 1.3.6.1.4.1.244.1.1.6.11
The banner displayed after logout.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcSystemWebTimeout 1.3.6.1.4.1.244.1.1.6.12
The timeout (in minutes) for web sessions. A value of 0 indicates that timeouts are disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 5..120  

slcSystemWebGadget 1.3.6.1.4.1.244.1.1.6.13
If enabled, iGoogle Gadget web content is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcSystemAction 1.3.6.1.4.1.244.1.1.6.14
Performs an action on the SLC. A read of this object always returns the value noAction(1). Setting this object to rebootSLC(2) will terminate all connections and reboot the SLC. Setting this object to shutdownSLC(3) will terminate all connections and shutdown the SLC so it can be powered off.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noAction(1), rebootSLC(2), shutdownSLC(3)  

slcSystemSSHPreAuthBanner 1.3.6.1.4.1.244.1.1.6.15
The banner displayed prior to SSH authentication.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcSystemSiteRackRow 1.3.6.1.4.1.244.1.1.6.16
The identifier of the row of racks in a data center containing the SLC.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..999  

slcSystemSiteRackCluster 1.3.6.1.4.1.244.1.1.6.17
The identifier of the group of racks in a given row (slcSystemSiteRackRow) containing the SLC.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..999  

slcSystemSiteRack 1.3.6.1.4.1.244.1.1.6.18
The identifier of the rack in a given rack group (slcSystemSiteRackCluster) containing the SLC.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..999  

slcSystemLCDScreens 1.3.6.1.4.1.244.1.1.6.19
A string describing the enabled LCD screens, in the order they are displayed. Each screen is separated by a comma. The possible screens are Current Time, Network, Console, Release, Date/Time, Device Ports, Location, Temperature and User Strings.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcSystemLCDUserStrLine1 1.3.6.1.4.1.244.1.1.6.20
For the LCD screen User Strings, this is the first line displayed on the LCD.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcSystemLCDUserStrLine2 1.3.6.1.4.1.244.1.1.6.21
For the LCD screen User Strings, this is the second line displayed on the LCD.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcSystemLCDScrolling 1.3.6.1.4.1.244.1.1.6.22
If enabled, the LCD automatically scrolls through the enabled screens.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcSystemLCDScrollDelay 1.3.6.1.4.1.244.1.1.6.23
If LCD scrolling is enabled (slcSystemLCDScrolling), the delay in seconds between displaying screens.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..60  

slcSystemLCDIdleDelay 1.3.6.1.4.1.244.1.1.6.24
If LCD scrolling is enabled (slcSystemLCDScrolling), the number of seconds after keypad input before auto-scrolling restarts.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 5..60  

slcSystemInternalTemp 1.3.6.1.4.1.244.1.1.6.25
The internal temperature of the SLC, given in Celsius. A value of 9999 is returned if an error is encountered reading the temperature.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcSystemWebProtocol 1.3.6.1.4.1.244.1.1.6.26
The protocol used by the web server. This setting is no longer available; the web server is configured to only support the TLS protocol.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tlsv1SSLv3(1), tlsv1SSLv3SSLv2(2)  

slcSystemWebCipher 1.3.6.1.4.1.244.1.1.6.27
The strength of the cipher used by the web server. A cipher with high strength uses 256, 168 or 128 bits; a cipher with medium strength uses 128 bits; a cipher with low strength uses 64 or 56 bits.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER highMedium(1), highMediumLow(2)  

slcSystemModelString 1.3.6.1.4.1.244.1.1.6.28
A string that describes the SLC model: --
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcSystemWebGroup 1.3.6.1.4.1.244.1.1.6.29
The group or groups that may access the web.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcSystemWebInterface 1.3.6.1.4.1.244.1.1.6.30
A string describing the interfaces the web is available on; for example: Eth1,Eth2,PPP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcSystemWebBanner 1.3.6.1.4.1.244.1.1.6.31
The banner on the web home page.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcSystemInternalTempLow 1.3.6.1.4.1.244.1.1.6.32
The minimum acceptable internal temperature for the SLC, in Celsius.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcSystemInternalTempHigh 1.3.6.1.4.1.244.1.1.6.33
The maximum acceptable internal temperature for the SLC, in Celsius.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcSystemCalibrateTemp 1.3.6.1.4.1.244.1.1.6.34
An offset in Celsius for calibrating the internal temperature of the SLC.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcSystemWebServer 1.3.6.1.4.1.244.1.1.6.35
If enabled, the web server will run and listen on TCP ports 80 and 443 (all requests to port 80 are redirected to port 443).
Status: current Access: read-only
OBJECT-TYPE    
  EnabledState  

slcEvents 1.3.6.1.4.1.244.1.1.0
OBJECT IDENTIFIER    

slcEventObjects 1.3.6.1.4.1.244.1.1.7
OBJECT IDENTIFIER    

slcPowerSupplyId 1.3.6.1.4.1.244.1.1.7.1
The identifier of the power supply in a slcEventPowerSupply trap.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER powerSupplyA(1), powerSupplyB(2), primaryInlet(3), secondaryInlet(4)  

slcPowerSupplyAction 1.3.6.1.4.1.244.1.1.7.2
The action that occurred for a power supply in a slcEventPowerSupply trap.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER powerSupplyFailed(1), powerSupplyRestored(2)  

slcDevPortNumBytes 1.3.6.1.4.1.244.1.1.7.3
The number of bytes received on a Device Port to trigger a slcEventDevicePortData or slcEventDevicePortSLMData trap.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortData 1.3.6.1.4.1.244.1.1.7.4
The character data received on a Device Port to trigger a slcEventDevicePortData trap.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcDevPortStartByte 1.3.6.1.4.1.244.1.1.7.5
The starting byte within the logging buffer of data received on a Device Port, which triggered a slcEventDevicePortSLMData trap.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortTimeFrame 1.3.6.1.4.1.244.1.1.7.6
The time frame, in seconds, after which a slcEventDevicePortSLMData trap is sent to the SLM to trigger retrieval of Device Port data.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slcDevPortDeviceErrorStatus 1.3.6.1.4.1.244.1.1.7.7
The status returned when an error occurs in a device connected to a Device Port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER lowPower(1), damageOrTamper(2)  

slcHostname 1.3.6.1.4.1.244.1.1.7.8
The hostname of the SLC sending the trap.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcPCCardSlot 1.3.6.1.4.1.244.1.1.7.9
The PC Card slot indicated for the trap.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER upperSlot(1), lowerSlot(2)  

slcPCCardAction 1.3.6.1.4.1.244.1.1.7.10
The action that occurred on a PC Card slot.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cardInserted(1), cardRemoved(2)  

slcPCCardType 1.3.6.1.4.1.244.1.1.7.11
The type of card inserted in a PC Card slot.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), storage(2), modem(3), isdn(4), wireless(5), gsmmodem(6)  

slcUSBAction 1.3.6.1.4.1.244.1.1.7.12
The action that occurred on a USB Port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER deviceInserted(1), deviceRemoved(2), noModemDialTone(3)  

slcUSBType 1.3.6.1.4.1.244.1.1.7.13
The type of device inserted in a USB Port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), storage(2), modem(3), isdn(4), wireless(5), gsmmodem(6)  

slcDevPortErrorStatus 1.3.6.1.4.1.244.1.1.7.14
The status returned when an error occurs in a Device Port. dataDrop applies to a specific Device Port and is sent when a Device Port is required to discard data in order to keep data moving for all connections to the Device Port. invalidIOConfiguration and errorIOModules apply to all Device Ports. invalidIOConfiguration is sent when the I/O modules installed in a SLC are in an invalid configuration. errorIOModules is sent when an error is detected in one or more I/O modules.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dataDrop(1), invalidIOConfiguration(2), errorIOModules(3)  

slcSDCardAction 1.3.6.1.4.1.244.1.1.7.15
The action that occurred on the SD Card slot.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER deviceInserted(1), deviceRemoved(2)  

slcRPMAction 1.3.6.1.4.1.244.1.1.7.16
The action that occurred on a Remote Power Manager.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcEventHost 1.3.6.1.4.1.244.1.1.7.17
The name or IP address of a host in a SLC event.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slcEventPowerSupply 1.3.6.1.4.1.244.1.1.0.1
The SNMP trap that is generated when a power supply fails or is restored.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventSysadminPassword 1.3.6.1.4.1.244.1.1.0.2
The SNMP trap that is generated when the sysadmin user password is changed.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventSLCShutdown 1.3.6.1.4.1.244.1.1.0.3
The SNMP trap that is generated when the SLC is shutdown.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventDevicePortData 1.3.6.1.4.1.244.1.1.0.4
The SNMP trap that is generated when data is received on a Device Port, and the Device Port has been configured to generate a trap when a specified number of bytes (slcDevPortNumBytes) or a specified sequence of bytes (slcDevPortCfgEmailTextString) is received. slcDevPortData is the actual data received.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventDevicePortSLMData 1.3.6.1.4.1.244.1.1.0.5
The SNMP trap that is generated when data is received on a Device Port, and the Device Port has been configured to generate a trap designated for the Secure Lantronix Management Appliance (SLM) when a specified number of bytes is received or a specified time frame is passed. This trap is only sent to the SLM.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventDevicePortSLMConfig 1.3.6.1.4.1.244.1.1.0.6
The SNMP trap that is generated when the SLM logging configuration is changed for a Device Port, and the Device Port has been configured to generate a trap designated for the Secure Lantronix Management Appliance (SLM). This trap specifies the new SLM logging configuration for the Device Port, and is only sent to the SLM.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventDevicePortDeviceLowTemp 1.3.6.1.4.1.244.1.1.0.7
The SNMP trap that is generated when the low temperature limit for a sensor connected to a Device Port is exceeded.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventDevicePortDeviceHighTemp 1.3.6.1.4.1.244.1.1.0.8
The SNMP trap that is generated when the high temperature limit for a sensor connected to a Device Port is exceeded.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventDevicePortDeviceLowHumidity 1.3.6.1.4.1.244.1.1.0.9
The SNMP trap that is generated when the low humidity limit for a sensor connected to a Device Port is exceeded.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventDevicePortDeviceHighHumidity 1.3.6.1.4.1.244.1.1.0.10
The SNMP trap that is generated when the high humidity limit for a sensor connected to a Device Port is exceeded.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventDevicePortDeviceError 1.3.6.1.4.1.244.1.1.0.11
The SNMP trap that is generated when an error occurs on a device connected to a Device Port.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventPCCardAction 1.3.6.1.4.1.244.1.1.0.12
The SNMP trap that is generated when an event occurs on one of the PC Card slots.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventSLCInternalTemp 1.3.6.1.4.1.244.1.1.0.13
The SNMP trap that is generated when the internal temperature of the SLC is outside of the acceptable operating range.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventUSBAction 1.3.6.1.4.1.244.1.1.0.14
The SNMP trap that is generated when an event occurs on one of the USB Ports.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventDevicePortError 1.3.6.1.4.1.244.1.1.0.15
The SNMP trap that is generated when an error occurs on a a Device Port, or across all Device Ports. If an error occurs across all Device Ports, slcDevPortId will be 1 (one).
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventSDCardAction 1.3.6.1.4.1.244.1.1.0.16
The SNMP trap that is generated when an event occurs on the SD Card slot.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventNoDialToneAlarm 1.3.6.1.4.1.244.1.1.0.17
The SNMP trap that is generated when an event indicates that a no-dial-tone condition on the internal modem exists.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventRPMAction 1.3.6.1.4.1.244.1.1.0.18
The SNMP trap that is generated when an event occurs on one of the Remote Power Manager (UPS or PDU) devices.
Status: current Access: read-only
NOTIFICATION-TYPE    

slcEventPingHostFails 1.3.6.1.4.1.244.1.1.0.19
The SNMP trap that is generated when the SLC is monitoring a host with regular pings and the SLC is unable to ping the host. The trap includes either the name or the IP address of the failed host.
Status: current Access: read-only
NOTIFICATION-TYPE