LANPLEX-SYSTEMS-MIB-1-2-2

File: LANPLEX-SYSTEMS-MIB-1-2-2.mib (99212 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

enterprises Counter Gauge
DisplayString OBJECT-TYPE TRAP-TYPE

Defined Types

LpsSlotEntry  
SEQUENCE    
  lpsSlotIndex INTEGER
  lpsSlotBoardType INTEGER
  lpsSlotBoardRevision OCTET STRING
  lpsSlotBoardStatus INTEGER
  lpsSlotBoardName DisplayString
  lpsSlotBoardNameAbbrev DisplayString
  lpsSlotEthernetPortCount INTEGER
  lpsSlotFddiMacCount INTEGER
  lpsSlotFddiPortCount INTEGER
  lpsSlotOvertemperature INTEGER
  lpsSlotTokenRingPortCount INTEGER

LpsPowerSupplyStatusEntry  
SEQUENCE    
  lpsPowerSupplyStatusIndex INTEGER
  lpsPowerSupplyStatus INTEGER
  lpsPowerSupplyStatusSupported INTEGER

LpsSnmpInternalProxyEntry  
SEQUENCE    
  lpsSnmpInternalProxyAgentId INTEGER
  lpsSnmpInternalProxyAccessClass INTEGER
  lpsSnmpInternalProxyCommunity OCTET STRING

LpsAgentTrapDescriptionTableEntry  
SEQUENCE    
  lpsAgentTrapDescriptionIndex INTEGER
  lpsAgentTrapEnterprise OBJECT IDENTIFIER
  lpsAgentTrapNumber INTEGER

LpsAgentTrapDestinationTableEntry  
SEQUENCE    
  lpsAgentTrapDestinationAddressType INTEGER
  lpsAgentTrapDestinationAddress OCTET STRING
  lpsAgentTrapDestinationTrapMask OCTET STRING
  lpsAgentTrapDestinationEntryStatus INTEGER

LpsInterfaceLocationEntry  
SEQUENCE    
  lpsInterfaceLocationIfIndex INTEGER
  lpsInterfaceLocationInterfaceType INTEGER
  lpsInterfaceLocationType INTEGER
  lpsInterfaceLocationTypeIndex INTEGER
  lpsInterfaceLocationLocalIndex INTEGER

LpsEthernetPortEntry  
SEQUENCE    
  lpsEthernetPortIndex INTEGER
  lpsEthernetPortIfIndex INTEGER
  lpsEthernetPortLabel DisplayString
  lpsEthernetPortLinkStatus INTEGER
  lpsEthernetPortType INTEGER

LpsEthernetPortRateEntry  
SEQUENCE    
  lpsEthernetPortRateIndex INTEGER
  lpsEthernetPortRateByteReceiveRate INTEGER
  lpsEthernetPortRatePeakByteReceiveRate INTEGER
  lpsEthernetPortRateFrameReceiveRate INTEGER
  lpsEthernetPortRatePeakFrameReceiveRate INTEGER
  lpsEthernetPortRateByteTransmitRate INTEGER
  lpsEthernetPortRatePeakByteTransmitRate INTEGER
  lpsEthernetPortRateFrameTransmitRate INTEGER
  lpsEthernetPortRatePeakFrameTransmitRate INTEGER

LpsSmtFddiMacBeaconEntry  
SEQUENCE    
  lpsSmtFddiMacBeaconSmtIndex INTEGER
  lpsSmtFddiMacBeaconIndex INTEGER
  lpsSmtFddiMacBeaconHistory OCTET STRING

LpsSmtFddiMacRateEntry  
SEQUENCE    
  lpsSmtFddiMacRateSmtIndex INTEGER
  lpsSmtFddiMacRateIndex INTEGER
  lpsSmtFddiMacRateByteReceiveRate INTEGER
  lpsSmtFddiMacRatePeakByteReceiveRate INTEGER
  lpsSmtFddiMacRateFrameReceiveRate INTEGER
  lpsSmtFddiMacRatePeakFrameReceiveRate INTEGER
  lpsSmtFddiMacRateByteTransmitRate INTEGER
  lpsSmtFddiMacRatePeakByteTransmitRate INTEGER
  lpsSmtFddiMacRateFrameTransmitRate INTEGER
  lpsSmtFddiMacRatePeakFrameTransmitRate INTEGER

LpsSmtFddiPortEntry  
SEQUENCE    
  lpsSmtFddiPortSmtIndex INTEGER
  lpsSmtFddiPortIndex INTEGER
  lpsSmtFddiPortLocationType INTEGER
  lpsSmtFddiPortLocationTypeIndex INTEGER
  lpsSmtFddiPortLocationLocalIndex INTEGER
  lpsSmtFddiPortLabel DisplayString

LpsBridgeEntry  
SEQUENCE    
  lpsBridgeIndex INTEGER
  lpsBridgePortCount INTEGER
  lpsBridgeAddressTableSize INTEGER
  lpsBridgeAddressTableCount INTEGER
  lpsBridgeAddressTablePeakCount INTEGER
  lpsBridgeAddressThreshold INTEGER
  lpsBridgeMode INTEGER
  lpsBridgeBackbonePort INTEGER
  lpsBridgeIpFragmentationEnabled INTEGER
  lpsBridgeTrFddiTranslationMode INTEGER

LpsBridgePortEntry  
SEQUENCE    
  lpsBridgePortBridgeIndex INTEGER
  lpsBridgePortIndex INTEGER
  lpsBridgePortIfIndex INTEGER
  lpsBridgePortReceiveMulticastLimit INTEGER
  lpsBridgePortAddressAction INTEGER
  lpsBridgePortSpanningTreeFrameReceivedCounts Counter
  lpsBridgePortReceiveBlockedDiscards Counter
  lpsBridgePortReceiveMulticastLimitExceededs Counter
  lpsBridgePortReceiveMulticastLimitExceededDiscards Counter
  lpsBridgePortReceiveSecurityDiscards Counter
  lpsBridgePortReceiveUnknownDiscards Counter
  lpsBridgePortReceiveOtherDiscards Counter
  lpsBridgePortReceiveErrorDiscards Counter
  lpsBridgePortSameSegmentDiscards Counter
  lpsBridgePortTransmitBlockedDiscards Counter
  lpsBridgePortReceiveAllPathFilteredFrames Counter
  lpsBridgePortReceiveMulticastPathFilteredFrames Counter
  lpsBridgePortTransmitAllPathFilteredFrames Counter
  lpsBridgePortTransmitMulticastPathFilteredFrames Counter
  lpsBridgePortForwardedUnicastFrames Counter
  lpsBridgePortForwardedUnicastOctets Counter
  lpsBridgePortForwardedMulticastFrames Counter
  lpsBridgePortForwardedMulticastOctets Counter
  lpsBridgePortFloodedUnicastFrames Counter
  lpsBridgePortFloodedUnicastOctets Counter

LpsBridgePortPairEntry  
SEQUENCE    
  lpsBridgePortPairBridgeIndex INTEGER
  lpsBridgePortPairReceivePortIndex INTEGER
  lpsBridgePortPairDestinationPortIndex INTEGER
  lpsBridgePortPairForwardedToUnicastFrames Counter
  lpsBridgePortPairForwardedToUnicastOctets Counter

LpsBridgePortAddressEntry  
SEQUENCE    
  lpsBridgePortAddressBridgeIndex INTEGER
  lpsBridgePortAddressPortIndex INTEGER
  lpsBridgePortAddressIndex INTEGER
  lpsBridgePortAddressRemoteAddress OCTET STRING
  lpsBridgePortAddressType INTEGER
  lpsBridgePortAddressIsStatic INTEGER
  lpsBridgePortAddressStaticPort INTEGER
  lpsBridgePortAddressAge INTEGER

LpsNetworkAnalyzerTableEntry  
SEQUENCE    
  lpsNetworkAnalyzerBridgeIndex INTEGER
  lpsNetworkAnalyzerBridgePortIndex INTEGER
  lpsNetworkAnalyzerPhysicalAddress OCTET STRING
  lpsNetworkAnalyzerStatus INTEGER

LpsNetworkPortMonitorTableEntry  
SEQUENCE    
  lpsNetworkPortMonitorBridgeIndex INTEGER
  lpsNetworkPortMonitorBridgePortIndex INTEGER
  lpsNetworkPortMonitorAnalyzerAddress OCTET STRING
  lpsNetworkPortMonitorStatus INTEGER

LpsTokenRingPortEntry  
SEQUENCE    
  lpsTokenRingPortIndex INTEGER
  lpsTokenRingPortIfIndex INTEGER
  lpsTokenRingPortLabel DisplayString
  lpsTokenRingPortInsertStatus INTEGER
  lpsTokenRingPortType INTEGER
  lpsTokenRingPortMode INTEGER
  lpsTokenRingPortSpeed INTEGER
  lpsTokenRingPortLineErrors Counter
  lpsTokenRingPortBurstErrors Counter
  lpsTokenRingPortACErrors Counter
  lpsTokenRingPortAbortTransErrors Counter
  lpsTokenRingPortInternalErrors Counter
  lpsTokenRingPortLostFrameErrors Counter
  lpsTokenRingPortReceiveCongestionErrors Counter
  lpsTokenRingPortFrameCopiedErrors Counter
  lpsTokenRingPortTokenErrors Counter
  lpsTokenRingPortSoftErrors Counter
  lpsTokenRingPortHardErrors Counter
  lpsTokenRingPortSignalLoss Counter
  lpsTokenRingPortTransmitBeacons Counter
  lpsTokenRingPortRecoveries Counter
  lpsTokenRingPortLobeWires Counter
  lpsTokenRingPortRemoves Counter
  lpsTokenRingPortSingles Counter
  lpsTokenRingPortFreqErrors Counter

Defined Values

synernetics 1.3.6.1.4.1.114
OBJECT IDENTIFIER    

lanplex 1.3.6.1.4.1.114.1
OBJECT IDENTIFIER    

lpsProducts 1.3.6.1.4.1.114.1.3
OBJECT IDENTIFIER    

lps6000 1.3.6.1.4.1.114.1.3.2
OBJECT IDENTIFIER    

lps2000 1.3.6.1.4.1.114.1.3.3
OBJECT IDENTIFIER    

lps6012 1.3.6.1.4.1.114.1.3.2.1
OBJECT IDENTIFIER    

lps6004 1.3.6.1.4.1.114.1.3.2.2
OBJECT IDENTIFIER    

lps2500 1.3.6.1.4.1.114.1.3.3.1
OBJECT IDENTIFIER    

lss2200 1.3.6.1.4.1.114.1.3.3.2
OBJECT IDENTIFIER    

lps2016 1.3.6.1.4.1.114.1.3.3.3
OBJECT IDENTIFIER    

lps6012System 1.3.6.1.4.1.114.1.3.2.1.1
OBJECT IDENTIFIER    

lps6012Chassis 1.3.6.1.4.1.114.1.3.2.1.2
OBJECT IDENTIFIER    

lps6012ESM 1.3.6.1.4.1.114.1.3.2.1.3
OBJECT IDENTIFIER    

lps6012EFSM 1.3.6.1.4.1.114.1.3.2.1.4
OBJECT IDENTIFIER    

lps6012TRSM 1.3.6.1.4.1.114.1.3.2.1.5
OBJECT IDENTIFIER    

lps6004System 1.3.6.1.4.1.114.1.3.2.2.1
OBJECT IDENTIFIER    

lps6004Chassis 1.3.6.1.4.1.114.1.3.2.2.2
OBJECT IDENTIFIER    

lps6004ESM 1.3.6.1.4.1.114.1.3.2.2.3
OBJECT IDENTIFIER    

lps6004EFSM 1.3.6.1.4.1.114.1.3.2.2.4
OBJECT IDENTIFIER    

lps6004TRSM 1.3.6.1.4.1.114.1.3.2.2.5
OBJECT IDENTIFIER    

lanplexSystemsMib 1.3.6.1.4.1.114.1.4
OBJECT IDENTIFIER    

lpsSystem 1.3.6.1.4.1.114.1.4.1
OBJECT IDENTIFIER    

lpsSlot 1.3.6.1.4.1.114.1.4.2
OBJECT IDENTIFIER    

lpsControlPanel 1.3.6.1.4.1.114.1.4.3
OBJECT IDENTIFIER    

lpsPowerSupply 1.3.6.1.4.1.114.1.4.4
OBJECT IDENTIFIER    

lpsSnmp 1.3.6.1.4.1.114.1.4.5
OBJECT IDENTIFIER    

lpsAgent 1.3.6.1.4.1.114.1.4.6
OBJECT IDENTIFIER    

lpsInterface 1.3.6.1.4.1.114.1.4.7
OBJECT IDENTIFIER    

lpsEthernetPort 1.3.6.1.4.1.114.1.4.8
OBJECT IDENTIFIER    

lpsSmt 1.3.6.1.4.1.114.1.4.9
OBJECT IDENTIFIER    

lpsBridge 1.3.6.1.4.1.114.1.4.10
OBJECT IDENTIFIER    

lpsIpRouter 1.3.6.1.4.1.114.1.4.11
OBJECT IDENTIFIER    

lpsNetworkMonitor 1.3.6.1.4.1.114.1.4.12
OBJECT IDENTIFIER    

lpsTokenRingPort 1.3.6.1.4.1.114.1.4.13
OBJECT IDENTIFIER    

lpsSystemId 1.3.6.1.4.1.114.1.4.1.1
The unique identifier assigned to this system during manufacturing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSystemType 1.3.6.1.4.1.114.1.4.1.2
The type of system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), lanplex6000(2), lanplex2000(3)  

lpsSystemName 1.3.6.1.4.1.114.1.4.1.3
The text string describing this system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

lpsSystemManufacturer 1.3.6.1.4.1.114.1.4.1.4
The text string describing the manufacturer of this system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..127)  

lpsSystemHardwareRevision 1.3.6.1.4.1.114.1.4.1.5
The revision level of the system, contained in two octets. The first octet indicates the artwork revision, and the second octet indicates the rework level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

lpsSystemMemorySize 1.3.6.1.4.1.114.1.4.1.6
The amount of memory (RAM), in bytes, present on the system processor board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSystemFlashMemorySize 1.3.6.1.4.1.114.1.4.1.7
The amount of flash memory, in bytes, present on the system processor board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSystemNvMemorySize 1.3.6.1.4.1.114.1.4.1.8
The amount of non-volatile memory, in bytes, present on the system processor board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSystemSoftwareRevision 1.3.6.1.4.1.114.1.4.1.9
The revision number of the LANplex system software. Each byte indicates the following: byte 0: major release number. byte 1: minor release number. byte 2: update number. byte 3: bits 7-6: release type. bits 5-0: supplemental identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

lpsSystemBuildTime 1.3.6.1.4.1.114.1.4.1.10
The build time of the system software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..127)  

lpsSystemSnmpRevision 1.3.6.1.4.1.114.1.4.1.11
The revision number of the SNMP agent implementation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSystemRequestedSnmpMode 1.3.6.1.4.1.114.1.4.1.12
This object describes the requested SNMP mode for the system. The value of this object indicates the mode that will become effective following a reboot of the system. Note that only a subset of the above values may be valid for some systems.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER singleAgentMode(1), multiAgentMode(2)  

lpsSystemCurrentSnmpMode 1.3.6.1.4.1.114.1.4.1.13
This object describes the currently active SNMP mode for the system. Note that only a subset of the above values may be valid for some systems.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER singleAgentMode(1), multiAgentMode(2)  

lpsSystemAction 1.3.6.1.4.1.114.1.4.1.14
This object, when read, always returns the value other(1). Setting this object to the value reset(2) causes a reset of the system. The value other(1) is not a vaild value for set operations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

lpsSystemOvertemperature 1.3.6.1.4.1.114.1.4.1.15
This object indicates the current overtemperature status for the system. If the system does not support overtemperature detection, this object returns notSupported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2), notSupported(3)  

lpsSystemFanFailure 1.3.6.1.4.1.114.1.4.1.16
This object indicates the current fan status for the system. If the system does not support fan failure detection, this object returns notSupported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2), notSupported(3)  

lpsSlotCount 1.3.6.1.4.1.114.1.4.2.1
The count of slots in the chassis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSlotTable 1.3.6.1.4.1.114.1.4.2.2
A list of slot entries. A single entry exists in this list for each slot in the chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsSlotEntry

lpsSlotEntry 1.3.6.1.4.1.114.1.4.2.2.1
A slot entry contains information about a particular slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsSlotEntry  

lpsSlotIndex 1.3.6.1.4.1.114.1.4.2.2.1.1
The index of the slot identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSlotBoardType 1.3.6.1.4.1.114.1.4.2.2.1.2
The type of board residing in the slot identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), emptyLocation(2), esmBoard(7), fcmBoard(8), lmmBoard(9), efsmBoard(10), trsmBoard(11)  

lpsSlotBoardRevision 1.3.6.1.4.1.114.1.4.2.2.1.3
The revision number of the board in the slot identified by this entry. If the slot is empty, or the revision is unknown this object returns a zero length string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1)  

lpsSlotBoardStatus 1.3.6.1.4.1.114.1.4.2.2.1.4
The status of the board in the slot identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notPresent(1), testing(2), offline(3), online(4)  

lpsSlotBoardName 1.3.6.1.4.1.114.1.4.2.2.1.5
The text string describing the board in the slot identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

lpsSlotBoardNameAbbrev 1.3.6.1.4.1.114.1.4.2.2.1.6
The abbreviation used to describe the board in the slot identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

lpsSlotEthernetPortCount 1.3.6.1.4.1.114.1.4.2.2.1.7
The count of ethernet ports in the slot identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSlotFddiMacCount 1.3.6.1.4.1.114.1.4.2.2.1.8
The count of FDDI MACs in the slot identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSlotFddiPortCount 1.3.6.1.4.1.114.1.4.2.2.1.9
The count of FDDI ports in the slot identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSlotOvertemperature 1.3.6.1.4.1.114.1.4.2.2.1.10
This object indicates the current overtemperature status for the slot. If the slot does not support overtemperature detection, this object returns notSupported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2), notSupported(3)  

lpsSlotTokenRingPortCount 1.3.6.1.4.1.114.1.4.2.2.1.11
The count of TokenRing ports in the slot identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsControlPanelHardwareRevision 1.3.6.1.4.1.114.1.4.3.1
An 8-bit value specifying the revision level of the control panel hardware.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

lpsControlPanelSoftwareRevision 1.3.6.1.4.1.114.1.4.3.2
An 8-bit value specifying the revision level of the control panel software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

lpsControlPanelLines 1.3.6.1.4.1.114.1.4.3.3
The number of lines in the control panel display.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsControlPanelColumns 1.3.6.1.4.1.114.1.4.3.4
The number of columns in the control panel display.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsControlPanelText 1.3.6.1.4.1.114.1.4.3.5
The currently displayed text in the control panel display.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

lpsPowerSupplyCount 1.3.6.1.4.1.114.1.4.4.1
The count of power supplies in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsPowerSupplyStatusTable 1.3.6.1.4.1.114.1.4.4.2
A list of power supply status entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsPowerSupplyStatusEntry

lpsPowerSupplyStatusEntry 1.3.6.1.4.1.114.1.4.4.2.1
A power supply status entry contains information about a particular power supply.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsPowerSupplyStatusEntry  

lpsPowerSupplyStatusIndex 1.3.6.1.4.1.114.1.4.4.2.1.1
The unique index of the power supply identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsPowerSupplyStatus 1.3.6.1.4.1.114.1.4.4.2.1.2
This object represents the power supply status. The value is a sum. It initially takes on the value 0, then for each failure type which is active, 2 raised to a power is added to the sum. The powers are according to the following table: Failure Type Power AC Failure 0 Plus 5 Failure 1 Plus 12 Failure 2 Over Temperature Failure 3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsPowerSupplyStatusSupported 1.3.6.1.4.1.114.1.4.4.2.1.3
This object represents the various power supply failure types which are supported. The value is a sum. It initially takes on the value 0, then for each failure type which is supported, 2 raised to a power is added to the sum. The powers are according to the following table: Failure Type Power AC Failure 0 Plus 5 Failure 1 Plus 12 Failure 2 Over Temperature Failure 3 This object used in conjunction with the lpsPowerSupplyStatus object for a given power supply provide a complete picture of the status of the power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSnmpAgentId 1.3.6.1.4.1.114.1.4.5.1
The unique id for this SNMP agent within the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSnmpInternalAgentTrapMask 1.3.6.1.4.1.114.1.4.5.2
This value is a bit string that indicates which traps are enabled for transmit to other agents in the system. The octet string value is treated as a 64-bit integer value. The value is a sum. It initially takes on the value 0, then for each trap which is enabled, 2 raised to the value of (lpsAgentTrapDescriptionIndex - 1) for that trap is added to the sum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8)  

lpsSnmpInternalAgentTrapDestinationMask 1.3.6.1.4.1.114.1.4.5.3
A value which indicates to which other agents in the system traps should be sent. The value is a sum. It initially takes on the value 0, then for each agent which is to receive traps, 2 raised to the value of (lpsSnmpAgentId - 1) for that agent is added to the sum. Note that only traps which are enabled according to the value of the lpsSnmpInternalAgentTrapMask object will be forwarded, and that each trap which is forwarded will be transmitted to each agent identified by this mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lpsSnmpProxyInternalRequests 1.3.6.1.4.1.114.1.4.5.4
This object determines if this agent will proxy requests to other agents in the system. If the value of this object is true(1), this agent will proxy requests to other agents in the chassis.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

lpsSnmpInternalProxyRequestMaxAge 1.3.6.1.4.1.114.1.4.5.5
The maximum time, in seconds, an internal proxy request will remain queued waiting for a response before being discarded. Note that when the value of lpsSnmpProxyInternalRequests is false(2), the value of this object is ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

lpsSnmpProxyInternalTraps 1.3.6.1.4.1.114.1.4.5.6
This object determines if this agent will generate proxy traps for those traps received from other agents in the system. If the value of this object is true(1), this agent will generate proxy traps for those received from other agents in the chassis. Note that agents will not proxy traps to other agents within the system to prevent looping of traps.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

lpsSnmpInternalProxyTable 1.3.6.1.4.1.114.1.4.5.7
A list of SNMP internal agent proxy entries. An entry in this table exists for each agent in the system that can be reached by this agent via the internal proxy mechanism.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsSnmpInternalProxyEntry

lpsSnmpInternalProxyEntry 1.3.6.1.4.1.114.1.4.5.7.1
An entry identifies the communities available for communicating with another agent in the system via the internal proxy mechanism.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsSnmpInternalProxyEntry  

lpsSnmpInternalProxyAgentId 1.3.6.1.4.1.114.1.4.5.7.1.1
The id of the agent identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSnmpInternalProxyAccessClass 1.3.6.1.4.1.114.1.4.5.7.1.2
The access to MIB objects supported by the agent identified by this entry provided by this agent, when using the community string identified by the corresponding value of lpsSnmpInternalProxyCommunity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER readOnly(1), readWrite(2)  

lpsSnmpInternalProxyCommunity 1.3.6.1.4.1.114.1.4.5.7.1.3
A community which allows access to MIB objects supported by the agent identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lpsAgentRequestMaxAge 1.3.6.1.4.1.114.1.4.6.1
The maximum time, in seconds, a local SNMP request will remain queued waiting for a response before being discarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

lpsAgentProxyRemoteSmtRequests 1.3.6.1.4.1.114.1.4.6.2
This object determines if this agent will proxy SMT requests to other FDDI stations. If the value of this object is true(1), this agent will proxy SMT requests to other stations. Note that only a subset of the above values may be valid for some systems.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

lpsAgentRemoteSmtProxyRequestMaxAge 1.3.6.1.4.1.114.1.4.6.3
The maximum time, in seconds, an SMT proxy request will remain queued waiting for a response before being discarded. Note that when the value of lpsAgentProxyRemoteSmtRequests is false(2), the value of this object is ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

lpsAgentProxyRemoteSmtEvents 1.3.6.1.4.1.114.1.4.6.4
This object determines if this agent will generate traps for SMT events occuring at other stations. If the value of this object is true(1), this agent will generate traps for all SMT events, those which occur locally, and those which occur at other stations. If the value of this object is false(2), this agent will only generate traps for events which occur locally. Note that only a subset of the above values may be valid for some systems.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

lpsAgentTrapDescriptionTable 1.3.6.1.4.1.114.1.4.6.5
This table contains a listing of trap descriptions for each trap supported by this agent. This provides a relationship between a trap index, and the trap enterprise oid and trap number for a given trap. In all cases except for the MIB-2 generic traps, the enterprise under which a trap is defined is the same as that appearing in the ENTERPRISE portion of the trap.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsAgentTrapDescriptionTableEntry

lpsAgentTrapDescriptionTableEntry 1.3.6.1.4.1.114.1.4.6.5.1
Information relating a trap index to a specific trap enterprise oid and trap number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsAgentTrapDescriptionTableEntry  

lpsAgentTrapDescriptionIndex 1.3.6.1.4.1.114.1.4.6.5.1.1
A unique index corresponding to the trap described by this entry. This value of this object corresponding to a particular trap will remain constant accross system resets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsAgentTrapEnterprise 1.3.6.1.4.1.114.1.4.6.5.1.2
The enterpise under which the trap identified by this entry is defined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

lpsAgentTrapNumber 1.3.6.1.4.1.114.1.4.6.5.1.3
The number of the trap identified by this entry, within the enterprise where it is defined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsAgentTrapDestinationTable 1.3.6.1.4.1.114.1.4.6.6
This table contains information specifying which traps will be transmitted to a given destination address. The table is indexed by the destination address type and destination address. Each entry in the table with a status of valid identifies a set of traps which, when generated, will be transmitted to the corresponding destination address listed in that entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsAgentTrapDestinationTableEntry

lpsAgentTrapDestinationTableEntry 1.3.6.1.4.1.114.1.4.6.6.1
Information relating a set of traps and a destination address to which each trap in ths set will be transmitted when it is generated. To create a new entry, set a non-existent instance of lpsAgentTrapDestinationTrapMask to a valid value. To remove an entry, set the instance of lpsAgentTrapDestinationEntryStatus for the entry to invalid(2).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsAgentTrapDestinationTableEntry  

lpsAgentTrapDestinationAddressType 1.3.6.1.4.1.114.1.4.6.6.1.1
The type of address identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ip(1)  

lpsAgentTrapDestinationAddress 1.3.6.1.4.1.114.1.4.6.6.1.2
The address, of the type specified by the corresponding value of lpsAgentTrapDestinationAddressType, to which the set of traps identified by this entry are to be transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lpsAgentTrapDestinationTrapMask 1.3.6.1.4.1.114.1.4.6.6.1.3
This value is a bit string that indicates which traps are enabled for the address identified by this entry. The octet string value is treated as a 64-bit value. The value is a sum. It initially takes on the value 0, then for each trap which is enabled, 2 raised to the value of (lpsAgentTrapDescriptionIndex - 1) for that trap is added to the sum. A new entry in the table is created by setting the value of this object for a new destination address type and destination address. Note that an octet string of all zeros is not a valid value for this object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8)  

lpsAgentTrapDestinationEntryStatus 1.3.6.1.4.1.114.1.4.6.6.1.4
The status of the trap destination table entry. Setting this object to invalid(1) has the effect of removing the corresponding entry from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

lpsInterfaceLocationTable 1.3.6.1.4.1.114.1.4.7.1
A list of interface location entries. A single entry exists in this list for each interface managed by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsInterfaceLocationEntry

lpsInterfaceLocationEntry 1.3.6.1.4.1.114.1.4.7.1.1
An interface location entry describes the location of a particular interface managed by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsInterfaceLocationEntry  

lpsInterfaceLocationIfIndex 1.3.6.1.4.1.114.1.4.7.1.1.1
The value of the MIB-II ifIndex corresponding to the interface identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsInterfaceLocationInterfaceType 1.3.6.1.4.1.114.1.4.7.1.1.2
The type of the physical implementation of the interface identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ethernetPort(2), fddiMac(3), tokenringPort(4)  

lpsInterfaceLocationType 1.3.6.1.4.1.114.1.4.7.1.1.3
The type of location where the interface identified by this entry is physically located.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), modularSlot(2), chassis(3), modularCard(4)  

lpsInterfaceLocationTypeIndex 1.3.6.1.4.1.114.1.4.7.1.1.4
The index of the location identified by the corresponding instance of lpsInterfaceLocationType where the interface identified by this entry is physically located.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsInterfaceLocationLocalIndex 1.3.6.1.4.1.114.1.4.7.1.1.5
The local index of the interface identified by this entry relative to its type specified by the corresponding value of lpsInterfaceLocationInterfaceType, and the location specified by the corresponding values of lpsInterfaceLocationType and lpsInterfaceLocationTypeIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsEthernetPortCount 1.3.6.1.4.1.114.1.4.8.1
The count of ethernet ports managed by this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsEthernetPortTable 1.3.6.1.4.1.114.1.4.8.2
A list of ethernet port entries. A single entry exists in this list for each ethernet port managed by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsEthernetPortEntry

lpsEthernetPortEntry 1.3.6.1.4.1.114.1.4.8.2.1
An ethernet port entry contains information about a particular ethernet port managed by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsEthernetPortEntry  

lpsEthernetPortIndex 1.3.6.1.4.1.114.1.4.8.2.1.1
The index of the ethernet port identified by this entry, relative to this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsEthernetPortIfIndex 1.3.6.1.4.1.114.1.4.8.2.1.2
The value of the MIB-II ifIndex corresponding to the ethernet port identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsEthernetPortLabel 1.3.6.1.4.1.114.1.4.8.2.1.3
An ASCII text string describing the ethernet port identified by this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

lpsEthernetPortLinkStatus 1.3.6.1.4.1.114.1.4.8.2.1.4
The current value of the link status for the ethernet port identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inActive(2)  

lpsEthernetPortType 1.3.6.1.4.1.114.1.4.8.2.1.5
Specific port type description for the ethernet port identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rj2110BaseT(1), rj4510BaseT(2), st10BaseFL(3), aui(4), bnc10Base2(5), other(6), rj45100BaseT(7)  

lpsEthernetPortRateTable 1.3.6.1.4.1.114.1.4.8.3
A list of ethernet port rate entries. A single entry exists in this list for each ethernet port, managed by this agent, which supports rate information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsEthernetPortRateEntry

lpsEthernetPortRateEntry 1.3.6.1.4.1.114.1.4.8.3.1
An ethernet port rate entry contains rate statistics for a particular ethernet port managed by this agent. Rate statistics are calculated based on a one second sampling interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsEthernetPortRateEntry  

lpsEthernetPortRateIndex 1.3.6.1.4.1.114.1.4.8.3.1.1
The index of the ethernet port identified by this entry, relative to this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsEthernetPortRateByteReceiveRate 1.3.6.1.4.1.114.1.4.8.3.1.2
The average number of bytes received per second by the ethernet port identified by this entry during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsEthernetPortRatePeakByteReceiveRate 1.3.6.1.4.1.114.1.4.8.3.1.3
The peak value of lpsEthernetPortRateByteReceiveRate since the system was last initialized for the ethernet port identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsEthernetPortRateFrameReceiveRate 1.3.6.1.4.1.114.1.4.8.3.1.4
The average number of frames received per second by the ethernet port identified by this entry during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsEthernetPortRatePeakFrameReceiveRate 1.3.6.1.4.1.114.1.4.8.3.1.5
The peak value of lpsEthernetPortRateFrameReceiveRate since the system was last initialized for the ethernet port identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsEthernetPortRateByteTransmitRate 1.3.6.1.4.1.114.1.4.8.3.1.6
The average number of bytes transmitted per second by the ethernet port identified by this entry during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsEthernetPortRatePeakByteTransmitRate 1.3.6.1.4.1.114.1.4.8.3.1.7
The peak value of lpsEthernetPortRateByteTransmitRate since the system was last initialized for the ethernet port identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsEthernetPortRateFrameTransmitRate 1.3.6.1.4.1.114.1.4.8.3.1.8
The average number of frames transmitted per second by the ethernet port identified by this entry during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsEthernetPortRatePeakFrameTransmitRate 1.3.6.1.4.1.114.1.4.8.3.1.9
The peak value of lpsEthernetPortRateFrameTransmitRate since the system was last initialized for the ethernet port identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtCount 1.3.6.1.4.1.114.1.4.9.1
The count of SMTs managed by this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiMacBeaconTable 1.3.6.1.4.1.114.1.4.9.4
A list of FDDI MAC beacon entries. A single entry exists in this list for each FDDI MAC, managed by this agent, which supports MAC beacon history.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsSmtFddiMacBeaconEntry

lpsSmtFddiMacBeaconEntry 1.3.6.1.4.1.114.1.4.9.4.1
An FDDI MAC beacon entry contains information about a particular FDDI MAC's beacon history.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsSmtFddiMacBeaconEntry  

lpsSmtFddiMacBeaconSmtIndex 1.3.6.1.4.1.114.1.4.9.4.1.1
The index of the SMT instance identified by this entry, relative to this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiMacBeaconIndex 1.3.6.1.4.1.114.1.4.9.4.1.2
The index of the FDDI MAC identified by this entry, within the SMT identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiMacBeaconHistory 1.3.6.1.4.1.114.1.4.9.4.1.3
This object gives a history of the most recent beacon information received on the FDDI MAC identified by this entry. It can contain up to a maximum of eight records. Each record is of the form: source MAC: 6 bytes beacon data length: 2 bytes. beacon data: 0-16 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

lpsSmtFddiMacRateTable 1.3.6.1.4.1.114.1.4.9.5
A list of FDDI MAC rate entries. A single entry exists in this list for each FDDI MAC, managed by this agent, which supports rate statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsSmtFddiMacRateEntry

lpsSmtFddiMacRateEntry 1.3.6.1.4.1.114.1.4.9.5.1
An FDDI MAC rate entry contains rate statistics for a particular FDDI MAC managed by this agent. Rate statistics are calculated based on a one second sampling interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsSmtFddiMacRateEntry  

lpsSmtFddiMacRateSmtIndex 1.3.6.1.4.1.114.1.4.9.5.1.1
The index of the SMT instance identified by this entry, relative to this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiMacRateIndex 1.3.6.1.4.1.114.1.4.9.5.1.2
The index of the FDDI MAC identified by this entry, within the SMT identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiMacRateByteReceiveRate 1.3.6.1.4.1.114.1.4.9.5.1.3
The average number of bytes received per second by the FDDI MAC identified by this entry during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiMacRatePeakByteReceiveRate 1.3.6.1.4.1.114.1.4.9.5.1.4
The peak value of lpsSmtFddiMacByteReceiveRate since the system was last initialized for the FDDI MAC identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiMacRateFrameReceiveRate 1.3.6.1.4.1.114.1.4.9.5.1.5
The average number of frames received per second by the FDDI MAC identified by this entry during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiMacRatePeakFrameReceiveRate 1.3.6.1.4.1.114.1.4.9.5.1.6
The peak value of lpsSmtFddiMacRateFrameReceiveRate since the system was last initialized for the FDDI MAC identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiMacRateByteTransmitRate 1.3.6.1.4.1.114.1.4.9.5.1.7
The average number of bytes transmitted per second by the FDDI MAC identified by this entry during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiMacRatePeakByteTransmitRate 1.3.6.1.4.1.114.1.4.9.5.1.8
The peak value of lpsSmtFddiMacByteTransmitRate since the system was last initialized for the FDDI MAC identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiMacRateFrameTransmitRate 1.3.6.1.4.1.114.1.4.9.5.1.9
The average number of frames transmitted per second by the FDDI MAC identified by this entry during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiMacRatePeakFrameTransmitRate 1.3.6.1.4.1.114.1.4.9.5.1.10
The peak value of lpsSmtFddiMacFrameTransmitRate since the system was last initialized for the FDDI MAC identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiPortTable 1.3.6.1.4.1.114.1.4.9.6
A list of FDDI port entries. A single entry exists in this list for each FDDI port managed by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsSmtFddiPortEntry

lpsSmtFddiPortEntry 1.3.6.1.4.1.114.1.4.9.6.1
An FDDI port entry contains information about a particular FDDI port managed by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsSmtFddiPortEntry  

lpsSmtFddiPortSmtIndex 1.3.6.1.4.1.114.1.4.9.6.1.1
The index of the SMT instance identified by this entry, relative to this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiPortIndex 1.3.6.1.4.1.114.1.4.9.6.1.2
The index of the FDDI port identified by this entry, within the SMT identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiPortLocationType 1.3.6.1.4.1.114.1.4.9.6.1.3
The type of location where the FDDI port identified by this entry is physically located.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), modularSlot(2), chassis(3), modularCard(4)  

lpsSmtFddiPortLocationTypeIndex 1.3.6.1.4.1.114.1.4.9.6.1.4
The index of the location identified by the corresponding instance of lpsSmtFddiPortLocationType where the FDDI port identified by this entry is physically located.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiPortLocationLocalIndex 1.3.6.1.4.1.114.1.4.9.6.1.5
The local index of the FDDI port identified by this entry relative to the location specified by the corresponding values of lpsSmtFddiPortLocationType and lpsSmtFddiPortLocationTypeIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsSmtFddiPortLabel 1.3.6.1.4.1.114.1.4.9.6.1.6
An ASCII text string describing the FDDI port identified by this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

lpsBridgeCount 1.3.6.1.4.1.114.1.4.10.1
The count of bridges managed by this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsBridgeTable 1.3.6.1.4.1.114.1.4.10.2
A list of bridge entries. A single entry exists in this list for each bridge managed by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsBridgeEntry

lpsBridgeEntry 1.3.6.1.4.1.114.1.4.10.2.1
A bridge entry contains information about a particular bridge managed by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsBridgeEntry  

lpsBridgeIndex 1.3.6.1.4.1.114.1.4.10.2.1.1
The index of the bridge identified by this entry, relative to this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsBridgePortCount 1.3.6.1.4.1.114.1.4.10.2.1.2
The number of bridge ports that the bridge identified by this entry controls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsBridgeAddressTableSize 1.3.6.1.4.1.114.1.4.10.2.1.3
The size of the address table for the bridge identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsBridgeAddressTableCount 1.3.6.1.4.1.114.1.4.10.2.1.4
The current count of addresses in the address table for the bridge identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsBridgeAddressTablePeakCount 1.3.6.1.4.1.114.1.4.10.2.1.5
The peak count of addresses in the address table for the bridge identified by this entry, since the system was last initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsBridgeAddressThreshold 1.3.6.1.4.1.114.1.4.10.2.1.6
A reporting threshold for the total number of addresses known for the bridge identified by this entry. When this threshold is reached, the event lpsBridgeAddressThresholdEvent is generated. The range of valid values for setting this object is between 1 and the corresponding value reported by lpsBridgeAddressTableSize + 1 (Note that this range applies to values issued in set requests. The current value may be outside this range, for example if the corresponding value of lpsBridgeMode is changed). Setting this object to one greater than the address table size disables the generation of lpsBridgeAddressThresholdEvents since the limit will never be reached.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lpsBridgeMode 1.3.6.1.4.1.114.1.4.10.2.1.7
The operational mode of the bridge identified by this entry. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER expressMode(1), ieee8021dBridgeMode(2), notSupported(3), ieee8021dSRTBridgeMode(4), ieee8021dSRBridgeMode(5), ibmSRBridgeMode(6), srtBBridgeMode(7), srExpressBridgeMode(8)  

lpsBridgeBackbonePort 1.3.6.1.4.1.114.1.4.10.2.1.8
The number of the port selected as the backbone segment port when the corresponding value of lpsBridgeMode is is expressMode(1). The value of this object can range from 1 to the corresponding value of lpsBridgePortCount, however, some bridges may support only a subset of ports as backbone ports. If the corresponding value of lpsBridgeMode is not expressMode(1), the value of this object is ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lpsBridgeIpFragmentationEnabled 1.3.6.1.4.1.114.1.4.10.2.1.9
A flag indicating whether or not IP fragmentation is enabled on this bridge. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2), notSupported(3)  

lpsBridgeTrFddiTranslationMode 1.3.6.1.4.1.114.1.4.10.2.1.10
The mode used to describe whether the embedded MAC addresses are byte-conjugated in order to convert them from Token Ring format to native FDDI format (and vice versa), or whether they are left alone (used for traffic flowing across a FDDI backbone to/from Token Ring end stations).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER native(1), backbone(2)  

lpsBridgePortTable 1.3.6.1.4.1.114.1.4.10.3
A list of bridge port entries. A single entry exists in this list for each bridge port managed by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsBridgePortEntry

lpsBridgePortEntry 1.3.6.1.4.1.114.1.4.10.3.1
A bridge port entry contains information about a particular bridge port managed by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsBridgePortEntry  

lpsBridgePortBridgeIndex 1.3.6.1.4.1.114.1.4.10.3.1.1
The index of the bridge identified by this entry, relative to this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsBridgePortIndex 1.3.6.1.4.1.114.1.4.10.3.1.2
The index of the bridge port identified by this entry, within the bridge identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsBridgePortIfIndex 1.3.6.1.4.1.114.1.4.10.3.1.3
The value of the MIB-II ifIndex corresponding to the bridge port identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsBridgePortReceiveMulticastLimit 1.3.6.1.4.1.114.1.4.10.3.1.4
The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is one second. The default value for this object is zero which implies an infinite rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

lpsBridgePortAddressAction 1.3.6.1.4.1.114.1.4.10.3.1.5
This object, when read, always returns the value other(1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from the address list for the bridge port identified by this entry. flushDynamicAddress: causes all dynamic addresses to be flushed from the address list for the bridge port identified by this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), freezeAddress(2), flushAddress(3), flushDynamicAddress(4)  

lpsBridgePortSpanningTreeFrameReceivedCounts 1.3.6.1.4.1.114.1.4.10.3.1.6
The number of spanning tree frames received by the bridge port identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortReceiveBlockedDiscards 1.3.6.1.4.1.114.1.4.10.3.1.7
The number of frames discarded by the bridge port identified by this entry because the receiving bridge port was not in the 'forwarding' state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortReceiveMulticastLimitExceededs 1.3.6.1.4.1.114.1.4.10.3.1.8
The number of times the value of lpsBridgePortReceiveMulticastLimit was exceeded for the port identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortReceiveMulticastLimitExceededDiscards 1.3.6.1.4.1.114.1.4.10.3.1.9
The number of multicast/broadcast frames discarded by the bridge port identified by this entry because the corresponding value of lpsBridgePortReceiveMulticastLimit was exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortReceiveSecurityDiscards 1.3.6.1.4.1.114.1.4.10.3.1.10
The number of frames discarded by the bridge port identified by this entry because they contained source addresses which were statically configured on another bridge port. A statically configured address (station), which is not allowed to move, appears to have moved.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortReceiveUnknownDiscards 1.3.6.1.4.1.114.1.4.10.3.1.11
The number of frames discarded by the bridge port identified by this entry because the destination address was unknown. Note that this counter is only valid for backbone ports, and only when the bridge is operating in express mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortReceiveOtherDiscards 1.3.6.1.4.1.114.1.4.10.3.1.12
The number of frames discarded by the bridge port identified by this entry because they contained either invalid (group) source addresses or source addresses belonging to this bridge (indicative of network loops).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortReceiveErrorDiscards 1.3.6.1.4.1.114.1.4.10.3.1.13
The number of frames discarded by the bridge port identified by this entry because of internal bridge system errors (e.g., hardware and software address table discrepencies).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortSameSegmentDiscards 1.3.6.1.4.1.114.1.4.10.3.1.14
The number of frames discarded by the bridge port identified by this entry because the destination address is known on the same network segment as the source address, i.e., the frame does not need to be bridged.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortTransmitBlockedDiscards 1.3.6.1.4.1.114.1.4.10.3.1.15
The number of frames discarded by the bridge port identified by this entry because the transmitting bridge port was not in the 'forwarding' state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortReceiveAllPathFilteredFrames 1.3.6.1.4.1.114.1.4.10.3.1.16
The number of frames discarded by the bridge port identified by this entry due to user defined receive all path filters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortReceiveMulticastPathFilteredFrames 1.3.6.1.4.1.114.1.4.10.3.1.17
The number of frames discarded by the bridge port identified by this entry due to user defined receive multicast path filters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortTransmitAllPathFilteredFrames 1.3.6.1.4.1.114.1.4.10.3.1.18
The number of frames discarded by the bridge port identified by this entry due to user defined transmit all path filters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortTransmitMulticastPathFilteredFrames 1.3.6.1.4.1.114.1.4.10.3.1.19
The number of frames discarded by the bridge port identified by this entry due to user defined transmit multicast path filters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortForwardedUnicastFrames 1.3.6.1.4.1.114.1.4.10.3.1.20
The number of unicast frames which this port forwarded to a single destination port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortForwardedUnicastOctets 1.3.6.1.4.1.114.1.4.10.3.1.21
The number of octets contained in unicast frames which this port forwarded to a single destination port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortForwardedMulticastFrames 1.3.6.1.4.1.114.1.4.10.3.1.22
The number of multicast frames which this port forwarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortForwardedMulticastOctets 1.3.6.1.4.1.114.1.4.10.3.1.23
The number of octets contained in multicast frames which this port forwarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortFloodedUnicastFrames 1.3.6.1.4.1.114.1.4.10.3.1.24
The number of unicast frames which this port flooded to all other ports in the bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortFloodedUnicastOctets 1.3.6.1.4.1.114.1.4.10.3.1.25
The number of octets contained in unicast frames which this port flooded to all other ports in the bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortPairTable 1.3.6.1.4.1.114.1.4.10.4
A list of bridge port pair statistics information. A single entry exists in this list for each bridge port pair combination within each bridge managed by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsBridgePortPairEntry

lpsBridgePortPairEntry 1.3.6.1.4.1.114.1.4.10.4.1
A bridge port pair entry contains statistics information for a port pair within the same bridge. The port paring consists of a receiving port indicated by the value of lpsBridgePortPairReceivePortIndex, and a destination port indicated by the corresponding value of lpsBridgePortPairDestinationPortIndex. The corresponding value of lpsBridgePortPairBridgeIndex is the index of the bridge containing the port pair. Note that no entries exist which are indexed with the same values for both lpsBridgePortPairReceivePortIndex and lpsBridgePortPairToDestinationPortIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsBridgePortPairEntry  

lpsBridgePortPairBridgeIndex 1.3.6.1.4.1.114.1.4.10.4.1.1
The index of the bridge identified by this entry, relative to this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsBridgePortPairReceivePortIndex 1.3.6.1.4.1.114.1.4.10.4.1.2
The index of the receiving bridge port identified by this entry, within the bridge identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsBridgePortPairDestinationPortIndex 1.3.6.1.4.1.114.1.4.10.4.1.3
The index of the destination bridge port identified by this entry, within the bridge identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsBridgePortPairForwardedToUnicastFrames 1.3.6.1.4.1.114.1.4.10.4.1.4
The number of unicast frames forwarded from the receiving bridge port identified by this entry to the destination bridge port identified by this entry. Note that this count only includes frames which were uniquely forwarded to the destination port, frames which were flooded are not included.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortPairForwardedToUnicastOctets 1.3.6.1.4.1.114.1.4.10.4.1.5
The number of octets contained in unicast frames forwarded from the receiving bridge port identified by this entry to the destination bridge port identified by this entry. Note that this count only includes frames which were uniquely forwarded to the destination port, frames which were flooded are not included.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsBridgePortAddressTable 1.3.6.1.4.1.114.1.4.10.5
A list of bridge port address information. A single entry exists in this list for each learned address, accross all bridge ports and all bridges managed by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsBridgePortAddressEntry

lpsBridgePortAddressEntry 1.3.6.1.4.1.114.1.4.10.5.1
An bridge port address entry contains information about a particular bridge port address. To create a new entry, set an instance of lpsBridgePortAddressRemoteAddress with the address index portion of the instance set to 0, to a valid value. To remove an entry, set the instance of the lpsBridgePortAddressType for the entry to invalid(2).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsBridgePortAddressEntry  

lpsBridgePortAddressBridgeIndex 1.3.6.1.4.1.114.1.4.10.5.1.1
The index of the bridge identified by this entry, relative to this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsBridgePortAddressPortIndex 1.3.6.1.4.1.114.1.4.10.5.1.2
The index of the bridge port identified by this entry, within the bridge identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsBridgePortAddressIndex 1.3.6.1.4.1.114.1.4.10.5.1.3
The index of this address entry within the bridge address table for the bridge identified by this entry. This index ranges from 1 to the corresponding value of lpsBridgeAddressTableSize.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsBridgePortAddressRemoteAddress 1.3.6.1.4.1.114.1.4.10.5.1.4
The remote MAC address detected on the bridge port identified by to this entry. Setting this object results in an attempt to create a new entry in the table. Since the value of lpsBridgePortAddressIndex is determined automatically internal to the bridge, a set is only successful if the index value specified for lpsBridgePortAddressIndex is zero. A get-next using the values of lpsBridgePortAddressTypeIndex and lpsBridgePortAddressPortIndex can be used to determine the address index assigned to the newly added address entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

lpsBridgePortAddressType 1.3.6.1.4.1.114.1.4.10.5.1.5
This object, when read, always returns the value valid(1). Setting this object to invalid(2) will remove the corresponding address entry from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

lpsBridgePortAddressIsStatic 1.3.6.1.4.1.114.1.4.10.5.1.6
A value indicating whether this MAC address was statically configured or was dynamically learned. Note that isStatic(1) it the only valid for set operations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER isStatic(1), isDynamic(2)  

lpsBridgePortAddressStaticPort 1.3.6.1.4.1.114.1.4.10.5.1.7
If the corresponding value of the object lpsBridgePortAddressIsStatic is isStatic(1), this object indicates the local bridge port index (as reported by lpsBridgePortLocalIndex) for which this address MAC was statically configured. If the object lpsBridgePortAddressIsStatic has the value isDynamic(2), the value of this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsBridgePortAddressAge 1.3.6.1.4.1.114.1.4.10.5.1.8
This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the bridge port identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsNetworkAnalyzerTable 1.3.6.1.4.1.114.1.4.12.1
A list of analyzer entries. A single entry exists in this list for each bridge port configured for an analyzer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsNetworkAnalyzerTableEntry

lpsNetworkAnalyzerTableEntry 1.3.6.1.4.1.114.1.4.12.1.1
An analyzer table entry contains information relating an analyzer port address to the bridge and port index for that analyzer. The effect of creating an entry for a particular port is to configure that port for monitoring. A port which is configured for monitoring is no longer available for switching. To create an entry, set the value of the lpsNetworkAnalyzerStatus object for a non-existent instance to valid(1). The value of the lpsNetworkAnalyzerPhysicalAddress object for the new entry is filled in as a result of the creation. The effect of removing an entry for a particular port is to disable the port for monitoring. The port is then available for switching. To remove an entry, set the value of the corresponding instance of the lpsNetworkAnalyzerStatus object to invalid(2).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsNetworkAnalyzerTableEntry  

lpsNetworkAnalyzerBridgeIndex 1.3.6.1.4.1.114.1.4.12.1.1.1
The index of the bridge relative to this agent where the analyzer identified by this entry is configured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsNetworkAnalyzerBridgePortIndex 1.3.6.1.4.1.114.1.4.12.1.1.2
The index of the port relative to the bridge identified by this entry where the analyzer identified by this entry is configured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsNetworkAnalyzerPhysicalAddress 1.3.6.1.4.1.114.1.4.12.1.1.3
The physical address of the bridge port identified by the corresponding values of lpsNetworkAnalyzerBridgeIndex and lpsNetworkAnayzerBridgePortIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

lpsNetworkAnalyzerStatus 1.3.6.1.4.1.114.1.4.12.1.1.4
The status of the entry. Setting the value of a non-existent instance of this object to valid(1) attempts to add the corresponding entry to the table. The effect of adding an entry to the table is to configure the port for monitoring and to disable it for switching. Setting an existing instance of this object to invalid(2) attempts to remove the corresponding entry from the table. The effect of removing an entry from the table is to disable the port for monitoring and to make available for switching.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

lpsNetworkPortMonitorTable 1.3.6.1.4.1.114.1.4.12.2
A list of monitor port entries. A single entry exists in this for each bridge port being monitored.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsNetworkPortMonitorTableEntry

lpsNetworkPortMonitorTableEntry 1.3.6.1.4.1.114.1.4.12.2.1
A port monitor table entry contains information relating a bridge port being monitored with the address of the analyzer which is being used to monitor the port. The effect of creating an entry for a particular port is to enable monitoring of that port by the analyzer specified. To create an entry, set the value of the lpsNetworkPortMonitorAnalyzerAddress object to the address of the network analyzer port. This value should be the same as the value of the lpsNetworkAnalyzerPhysicalAddress object for the analyzer. The effect of removing an entry for a particular port is to disable monitoring of that port. To remove an entry, set the value of the corresponding instance of the lpsNetworkPortMonitorStatus object to invalid(2).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsNetworkPortMonitorTableEntry  

lpsNetworkPortMonitorBridgeIndex 1.3.6.1.4.1.114.1.4.12.2.1.1
The index of the bridge relative to this agent where the monitored port identified by this entry is located.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsNetworkPortMonitorBridgePortIndex 1.3.6.1.4.1.114.1.4.12.2.1.2
The index of the port which is being monitored relative to the bridge identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsNetworkPortMonitorAnalyzerAddress 1.3.6.1.4.1.114.1.4.12.2.1.3
The physical address of the port where the analyzer, which is monitoring the port identified by this entry, is located. Setting the value of a non-existent instance of this object attempts to add an entry to the table. The effect of adding an entry to the table is to enable monitoring of the port by the analyzer specified. Setting the value of an existing instance of this object will switch the monitored port to the new analyzer address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

lpsNetworkPortMonitorStatus 1.3.6.1.4.1.114.1.4.12.2.1.4
The status of the entry. Setting an existing instance of this object to invalid(2) attempts to remove the corresponding entry from the table. The effect of removing an entry from the table is to disable monitoring of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

lpsTokenRingPortCount 1.3.6.1.4.1.114.1.4.13.1
The count of token ring ports managed by this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsTokenRingPortTable 1.3.6.1.4.1.114.1.4.13.2
A list of token ring port entries. A single entry exists in this list for each token ring port managed by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpsTokenRingPortEntry

lpsTokenRingPortEntry 1.3.6.1.4.1.114.1.4.13.2.1
A token ring port entry contains information about a particular token ring port managed by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpsTokenRingPortEntry  

lpsTokenRingPortIndex 1.3.6.1.4.1.114.1.4.13.2.1.1
The index of the token ring port identified by this entry, relative to this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsTokenRingPortIfIndex 1.3.6.1.4.1.114.1.4.13.2.1.2
The value of the MIB-II ifIndex corresponding to the token ring port identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpsTokenRingPortLabel 1.3.6.1.4.1.114.1.4.13.2.1.3
An ASCII text string describing the token ring port identified by this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

lpsTokenRingPortInsertStatus 1.3.6.1.4.1.114.1.4.13.2.1.4
The current value of the link status for the token ring port identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inserted(1), deinserted(2)  

lpsTokenRingPortType 1.3.6.1.4.1.114.1.4.13.2.1.5
Specific port type description for the token ring port identified by this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rj45(1), other(2)  

lpsTokenRingPortMode 1.3.6.1.4.1.114.1.4.13.2.1.6
The current mode of the port. The default mode (station) is used to connect a hub to the port. Lobe mode is used to direct connect a Token Ring station into the port. This selection can only be made on ports 1 and 2 of the module.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER station(1), lobe(2)  

lpsTokenRingPortSpeed 1.3.6.1.4.1.114.1.4.13.2.1.7
The current speed of the port. The default speed is sixteenMegabit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fourMegabit(1), sixteenMegabit(2), sixteenMegabitETR(3)  

lpsTokenRingPortLineErrors 1.3.6.1.4.1.114.1.4.13.2.1.8
This counter is incremented when a frame or token is copied or repeated by a station, the E bit is zero in the frame or token and one of the following conditions exists: 1) there is a non-data bit (J or K bit) between the SD and the ED of the frame or token, or 2) there is an FCS error in the frame.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortBurstErrors 1.3.6.1.4.1.114.1.4.13.2.1.9
This counter is incremented when a station detects the absence of transitions for five half-bit timers (burst-five error).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortACErrors 1.3.6.1.4.1.114.1.4.13.2.1.10
This counter is incremented when a station receives an AMP or SMP frame in which A is equal to C is equal to 0, and then receives another SMP frame with A is equal to C is equal to 0 without first receiving an AMP frame. It denotes a station that cannot set the AC bits properly.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortAbortTransErrors 1.3.6.1.4.1.114.1.4.13.2.1.11
This counter is incremented when a station transmits an abort delimiter while transmitting.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortInternalErrors 1.3.6.1.4.1.114.1.4.13.2.1.12
This counter is incremented when a station recognizes an internal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortLostFrameErrors 1.3.6.1.4.1.114.1.4.13.2.1.13
This counter is incremented when a station is transmitting and its TRR timer expires. This condition denotes a condition where a transmitting station in strip mode does not receive the trailer of the frame before the TRR timer goes off.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortReceiveCongestionErrors 1.3.6.1.4.1.114.1.4.13.2.1.14
This counter is incremented when a station recognizes a frame addressed to its specific address, but has no available buffer space indicating that the station is congested.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortFrameCopiedErrors 1.3.6.1.4.1.114.1.4.13.2.1.15
This counter is incremented when a station recognizes a frame addressed to its specific address and detects that the FS field A bits are set to 1 indicating a possible line hit or duplicate address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortTokenErrors 1.3.6.1.4.1.114.1.4.13.2.1.16
This counter is incremented when a station acting as the active monitor recognizes an error condition that needs a token transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortSoftErrors 1.3.6.1.4.1.114.1.4.13.2.1.17
The number of Soft Errors the interface has detected. It directly corresponds to the number of Report Error MAC frames that this interface has transmitted. Soft Errors are those which are recoverable by the MAC layer protocols.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortHardErrors 1.3.6.1.4.1.114.1.4.13.2.1.18
The number of times this interface has detected an immediately recoverable fatal error. It denotes the number of times this interface is either transmitting or receiving beacon MAC frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortSignalLoss 1.3.6.1.4.1.114.1.4.13.2.1.19
The number of times this interface has detected the loss of signal condition from the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortTransmitBeacons 1.3.6.1.4.1.114.1.4.13.2.1.20
The number of times this interface has transmitted a beacon frame.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortRecoveries 1.3.6.1.4.1.114.1.4.13.2.1.21
The number of Claim Token MAC frames received or transmitted after the interface has received a Ring Purge MAC frame. This counter signifies the number of times the ring has been purged and is being recovered back into a normal operating state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortLobeWires 1.3.6.1.4.1.114.1.4.13.2.1.22
The number of times the interface has detected an open or short circuit in the lobe data path. The adapter will be closed when this condition occurs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortRemoves 1.3.6.1.4.1.114.1.4.13.2.1.23
The number of times the interface has received a Remove Ring Station MAC frame request. When this frame is received the interface will enter the close state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortSingles 1.3.6.1.4.1.114.1.4.13.2.1.24
The number of times the interface has sensed that it is the only station on the ring. This will happen if the interface is the first one up on a ring, or if there is a hardware problem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpsTokenRingPortFreqErrors 1.3.6.1.4.1.114.1.4.13.2.1.25
The number of times the interface has detected that the frequency of the incoming signal differs from the expected frequency.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

lpsSystemOverTemperatureEvent 1
The trap that is generated when the system temperature exceeds a certain threshold.
TRAP-TYPE    

lpsPowerSupplyFailureEvent 2
The trap that is generated when a power supply unit fails.
TRAP-TYPE    

lpsChassisSlotOverTemperatureEvent 3
The trap that is generated when the temperature of a board in a particular slot exceeds a certain threshold.
TRAP-TYPE    

lpsChassisSlotInsertEvent 4
The trap that is generated when a board is inserted into a particular slot.
TRAP-TYPE    

lpsChassisSlotExtractEvent 5
The trap that is generated when a board is extracted from a particular slot.
TRAP-TYPE    

lpsBridgeAddressThresholdEvent 6
The trap that is generated when the number of addresses stored in the bridge reaches lpsBridgeAddressThreshold.
TRAP-TYPE    

lpsSystemFanFailureEvent 7
The trap that is generated when one of the system fans fails.
TRAP-TYPE