LANPLEX-OPT-FDDI-MIB-1-1-2

File: LANPLEX-OPT-FDDI-MIB-1-1-2.mib (29614 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC-1215
DRAFT-FDDI-MIB-VER-3-2

Imported symbols

enterprises Counter OBJECT-TYPE
TRAP-TYPE FddiTimeNano FddiSMTStationIdType
fddimibSMTStationId fddimibSMTCFState fddimibSMTPeerWrapFlag
fddimibMACSMTAddress fddimibMACDaFlag fddimibMACUnaDaFlag
fddimibMACFrameErrorFlag fddimibMACFrameCts fddimibMACErrorCts
fddimibMACLostCts fddimibMACFrameErrorRatio fddimibMACNotCopiedCts
fddimibMACCopiedCts fddimibMACNotCopiedRatio fddimibMACNotCopiedFlag
fddimibMACUpstreamNbr fddimibMACOldUpstreamNbr fddimibMACDownstreamNbr
fddimibMACOldDownstreamNbr fddimibMACCurrentPath fddimibMACAvailablePaths
fddimibMACRequestedPaths fddimibPORTLerCutoff fddimibPORTLerAlarm
fddimibPORTLerEstimate fddimibPORTLemRejectCts fddimibPORTLemCts
fddimibPORTLerFlag fddimibPORTMyType fddimibPORTConnectState
fddimibPORTNeighborType fddimibPORTPCWithhold fddimibPORTAvailablePaths
fddimibPORTCurrentPath fddimibPORTRequestedPaths

Defined Types

LpOptSMTEntry  
SEQUENCE    
  lpOptSMTIndex INTEGER
  lpOptSMTManufacturerOUI STRING
  lpOptSMTManufacturerData STRING
  lpOptSMTHoldState INTEGER
  lpOptSMTSetCount INTEGER
  lpOptSMTLastSetStationId FddiSMTStationIdType

LpOptMACBridgeFunctionEntry  
SEQUENCE    
  lpOptMACBridgeFunctionSMTIndex INTEGER
  lpOptMACBridgeFunctionMACIndex INTEGER
  lpOptMACBridgeFunctions INTEGER

LpOptMACTPriEntry  
SEQUENCE    
  lpOptMACTPriSMTIndex INTEGER
  lpOptMACTPriMACIndex INTEGER
  lpOptMACTPri0 FddiTimeNano
  lpOptMACTPri1 FddiTimeNano
  lpOptMACTPri2 FddiTimeNano
  lpOptMACTPri3 FddiTimeNano
  lpOptMACTPri4 FddiTimeNano
  lpOptMACTPri5 FddiTimeNano
  lpOptMACTPri6 FddiTimeNano

LpOptPATHRingEntry  
SEQUENCE    
  lpOptPATHRingSMTIndex INTEGER
  lpOptPATHRingPATHIndex INTEGER
  lpOptPATHRingLatency FddiTimeNano
  lpOptPATHTraceStatus INTEGER
  lpOptPATHT-Rmode FddiTimeNano

LpOptPATHSbaEntry  
SEQUENCE    
  lpOptPATHSbaSMTIndex INTEGER
  lpOptPATHSbaPATHIndex INTEGER
  lpOptPATHSbaPayload INTEGER
  lpOptPATHSbaOverhead INTEGER
  lpOptPATHSbaAvailable INTEGER

LpOptPORTEntry  
SEQUENCE    
  lpOptPORTSMTIndex INTEGER
  lpOptPORTIndex INTEGER
  lpOptPORTMACLoopTime FddiTimeNano
  lpOptPORTEBErrorCt Counter

LpOptPORTLSEntry  
SEQUENCE    
  lpOptPORTLSSMTIndex INTEGER
  lpOptPORTLSPORTIndex INTEGER
  lpOptPORTMaintLS INTEGER
  lpOptPORTPCLS INTEGER

Defined Values

synernetics 1.3.6.1.4.1.114
OBJECT IDENTIFIER    

lanplex 1.3.6.1.4.1.114.1
OBJECT IDENTIFIER    

lanplexOptFddi 1.3.6.1.4.1.114.1.10
OBJECT IDENTIFIER    

lpOptSMT 1.3.6.1.4.1.114.1.10.1
OBJECT IDENTIFIER    

lpOptMAC 1.3.6.1.4.1.114.1.10.2
OBJECT IDENTIFIER    

lpOptPATH 1.3.6.1.4.1.114.1.10.3
OBJECT IDENTIFIER    

lpOptPORT 1.3.6.1.4.1.114.1.10.4
OBJECT IDENTIFIER    

lpOptSMTTable 1.3.6.1.4.1.114.1.10.1.1
A list of optional SMT entries. The number of entries shall not exceed the value of snmpFddiSMTNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    LpOptSMTEntry

lpOptSMTEntry 1.3.6.1.4.1.114.1.10.1.1.1
An optional SMT entry containing information common to a given optional SMT.
OBJECT-TYPE    
  LpOptSMTEntry  

lpOptSMTIndex 1.3.6.1.4.1.114.1.10.1.1.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER 1..65535  

lpOptSMTManufacturerOUI 1.3.6.1.4.1.114.1.10.1.1.1.2
The three octets of manufacturer data which make up the manufacturerOUI component.
OBJECT-TYPE    
  STRING Size(3)  

lpOptSMTManufacturerData 1.3.6.1.4.1.114.1.10.1.1.1.3
The 29 octets of manufacturer data which make up the manufacturerData component.
OBJECT-TYPE    
  STRING Size(29)  

lpOptSMTHoldState 1.3.6.1.4.1.114.1.10.1.1.1.4
This variable indicates the current state of the Hold function. The value 'not-holding' is the default and initial value. The value must be set to 'not-holding' as part of Active_Actions and when the conditions causing 'holding-prm' or 'holding-sec' are no longer true. The value 'holding-prm' must be set when the condition (notTR_Flag & not RE_Flag & (PC_LS=QLS | LEM_Fail | TNE>NS_Max | (not LS_Flag & TPC > T_Out))) is satisfied in state PC8:ACTIVE for the A Port. The value 'holding-sec' must be set when the condition (notTR_Flag & not RE_Flag & (PC_LS=QLS | LEM_Fail | TNE>NS_Max | (not LS_Flag & TPC > T_Out))) is satisfied in state PC8:ACTIVE for the B Port.
OBJECT-TYPE    
  INTEGER not-implemented(1), not-holding(2), holding-prm(3), holding-sec(4)  

lpOptSMTSetCount 1.3.6.1.4.1.114.1.10.1.1.1.5
This variable is composed of a count incremented in response to a Set operation on the MIB, and the time of the change, however only the count is reported here (refer to ANSI SMT 8.4.1).
OBJECT-TYPE    
  INTEGER  

lpOptSMTLastSetStationId 1.3.6.1.4.1.114.1.10.1.1.1.6
The Station ID of the station that effected the last change in the FDDI MIB.
OBJECT-TYPE    
  FddiSMTStationIdType  

lpOptMACBridgeFunctionTable 1.3.6.1.4.1.114.1.10.2.1
A list of MAC bridge function entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LpOptMACBridgeFunctionEntry

lpOptMACBridgeFunctionEntry 1.3.6.1.4.1.114.1.10.2.1.1
Bridge function information for a given MAC within a given SMT.
OBJECT-TYPE    
  LpOptMACBridgeFunctionEntry  

lpOptMACBridgeFunctionSMTIndex 1.3.6.1.4.1.114.1.10.2.1.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER 1..65535  

lpOptMACBridgeFunctionMACIndex 1.3.6.1.4.1.114.1.10.2.1.1.2
Index variable for uniquely identifying the MAC object instances.
OBJECT-TYPE    
  INTEGER 1..65535  

lpOptMACBridgeFunctions 1.3.6.1.4.1.114.1.10.2.1.1.3
Indicates the MAC's optional bridging functions. The Value -1 is used to indicate that bridging is not supported by this MAC. The value is a sum. This value initially takes the value zero, then for each function present, 2 raised to a power is added to the sum. The powers are according to the following table: Function Power tb 0 -- Transparent bridging active sr 1 -- Src routing active srt 2 -- Src routing transparent active
OBJECT-TYPE    
  INTEGER -1..7  

lpOptMACTPriTable 1.3.6.1.4.1.114.1.10.2.2
A list of MAC T-Pri entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LpOptMACTPriEntry

lpOptMACTPriEntry 1.3.6.1.4.1.114.1.10.2.2.1
A collection of T-Pri information for a given MAC within a given SMT.
OBJECT-TYPE    
  LpOptMACTPriEntry  

lpOptMACTPriSMTIndex 1.3.6.1.4.1.114.1.10.2.2.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER 1..65535  

lpOptMACTPriMACIndex 1.3.6.1.4.1.114.1.10.2.2.1.2
Index variable for uniquely identifying the MAC object instances.
OBJECT-TYPE    
  INTEGER 1..65535  

lpOptMACTPri0 1.3.6.1.4.1.114.1.10.2.2.1.3
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lpOptMACTPri1 1.3.6.1.4.1.114.1.10.2.2.1.4
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lpOptMACTPri2 1.3.6.1.4.1.114.1.10.2.2.1.5
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lpOptMACTPri3 1.3.6.1.4.1.114.1.10.2.2.1.6
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lpOptMACTPri4 1.3.6.1.4.1.114.1.10.2.2.1.7
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lpOptMACTPri5 1.3.6.1.4.1.114.1.10.2.2.1.8
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lpOptMACTPri6 1.3.6.1.4.1.114.1.10.2.2.1.9
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lpOptPATHRingTable 1.3.6.1.4.1.114.1.10.3.1
A list of PATH ring entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LpOptPATHRingEntry

lpOptPATHRingEntry 1.3.6.1.4.1.114.1.10.3.1.1
Ring latency, trace status, and T-Rmode information for a given PATH within a given SMT.
OBJECT-TYPE    
  LpOptPATHRingEntry  

lpOptPATHRingSMTIndex 1.3.6.1.4.1.114.1.10.3.1.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER 1..65535  

lpOptPATHRingPATHIndex 1.3.6.1.4.1.114.1.10.3.1.1.2
Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values 3 to 255.
OBJECT-TYPE    
  INTEGER 1..255  

lpOptPATHRingLatency 1.3.6.1.4.1.114.1.10.3.1.1.3
Gives the total accumulated latency of the ring associated with this path. May be measured directly by the station or calculated by a management station. Values of this object are reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lpOptPATHTraceStatus 1.3.6.1.4.1.114.1.10.3.1.1.4
This attribute indicates the current trace status of the path. The value is a sum which represents all of the trace status information which applies. This value initially takes the value zero, then for each condition which applies, 2 raised to a power is added to the sum. the powers are according to the following table: TraceStatus Power traceinitiated 0 tracepropragated 1 traceterminated 2 tracetimeout 3
OBJECT-TYPE    
  INTEGER 0..15  

lpOptPATHT-Rmode 1.3.6.1.4.1.114.1.10.3.1.1.5
Used by RMT to limit the duration of restricted dialogs on a path. This object is reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lpOptPATHSbaTable 1.3.6.1.4.1.114.1.10.3.2
A list of PATH Sba entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LpOptPATHSbaEntry

lpOptPATHSbaEntry 1.3.6.1.4.1.114.1.10.3.2.1
Sba information for a given PATH within a given SMT.
OBJECT-TYPE    
  LpOptPATHSbaEntry  

lpOptPATHSbaSMTIndex 1.3.6.1.4.1.114.1.10.3.2.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER 1..65535  

lpOptPATHSbaPATHIndex 1.3.6.1.4.1.114.1.10.3.2.1.2
Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values 3 to 255.
OBJECT-TYPE    
  INTEGER 1..255  

lpOptPATHSbaPayload 1.3.6.1.4.1.114.1.10.3.2.1.3
The payload portion of the Synchronous Bandwidth Allocation for thi path. This value represents the maximum number of bytes of data allocated for transmission per 125 microseconds.
OBJECT-TYPE    
  INTEGER 0..1562  

lpOptPATHSbaOverhead 1.3.6.1.4.1.114.1.10.3.2.1.4
The overhead portion of the Synchronous Bandwith Allocation for this path. This value repersents the maximum number of bytes overhead (token capture, frame header, etc.) used pre negotiated Target Token Rotation Time (T_neg).
OBJECT-TYPE    
  INTEGER  

lpOptPATHSbaAvailable 1.3.6.1.4.1.114.1.10.3.2.1.5
This value is the maximum Synchronous Bandwith available for a path in bytes per second.
OBJECT-TYPE    
  INTEGER 0..12500000  

lpOptPORTTable 1.3.6.1.4.1.114.1.10.4.1
A list of optional PORT entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LpOptPORTEntry

lpOptPORTEntry 1.3.6.1.4.1.114.1.10.4.1.1
MAC loop time and EB error count information for a given PORT within a given SMT.
OBJECT-TYPE    
  LpOptPORTEntry  

lpOptPORTSMTIndex 1.3.6.1.4.1.114.1.10.4.1.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER 1..65535  

lpOptPORTIndex 1.3.6.1.4.1.114.1.10.4.1.1.2
Index variable for uniquely identifying the PORT object instances.
OBJECT-TYPE    
  INTEGER 1..65535  

lpOptPORTMACLoopTime 1.3.6.1.4.1.114.1.10.4.1.1.3
This attribute controls the value used for T_Next(9) (see 9.4.4.2.3). This object is reported in 1 ns units.
OBJECT-TYPE    
  FddiTimeNano  

lpOptPORTEBErrorCt 1.3.6.1.4.1.114.1.10.4.1.1.4
A count that should as closely as possible match the times an Elasticity Buffer Error has occurred while in active line state.
OBJECT-TYPE    
  Counter  

lpOptPORTLSTable 1.3.6.1.4.1.114.1.10.4.2
A list of optional PORT line state entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LpOptPORTLSEntry

lpOptPORTLSEntry 1.3.6.1.4.1.114.1.10.4.2.1
Maintenance line state and PC line state information for a given PORT within a given SMT.
OBJECT-TYPE    
  LpOptPORTLSEntry  

lpOptPORTLSSMTIndex 1.3.6.1.4.1.114.1.10.4.2.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER 1..65535  

lpOptPORTLSPORTIndex 1.3.6.1.4.1.114.1.10.4.2.1.2
Index variable for uniquely identifying the PORT object instances.
OBJECT-TYPE    
  INTEGER 1..65535  

lpOptPORTMaintLS 1.3.6.1.4.1.114.1.10.4.2.1.3
The PORT Maintenance Line State specifies the line state (Maint_LS) to be transmitted when the PCM state machine for the port is in state PC9 Maint.
OBJECT-TYPE    
  INTEGER quiet(1), idle(2), master(3), halt(4), receive-active(5), receive-unknown(6), receive-noise(7)  

lpOptPORTPCLS 1.3.6.1.4.1.114.1.10.4.2.1.4
This attribute indicates the line state (PC_LS) received by the port.
OBJECT-TYPE    
  INTEGER quiet(1), idle(2), master(3), halt(4), receive-active(5), receive-unknown(6), receive-noise(7)  

lpOptSMTHoldCondition 1
Generated when fddiSMTHoldState (fddimibSMTHoldState) assumes the state holding-prm or holding-sec. This notification is a Condition in the Status Report Protocol (see 7.2.7 and 8.3).
TRAP-TYPE    

lpOptSMTPeerWrapCondition 2
This condition is active when fddiSMTPeerWrapFlag (fddimibSMTPeerWrapFlag) is set. This notification is a Condition in the Status Report Protocol (see 7.2.7 and 8.3).
TRAP-TYPE    

lpOptMACDuplicateAddressCondition 3
This condition is active when either fddiMACDA-Flag (fddimibMACDaFlag) or fddiMACUNDA-Flag (fddimibMACUnaDaFlag) is set. This event is handled as a Condition in the Status Report Protocol (see 7.2.7 and 8.3).
TRAP-TYPE    

lpOptMACFrameErrorCondition 4
Generated when the fddiMACFrameErrorRatio (fddimibMACFrameErrorRatio) is greater than or equal to fddiMACFrameErrorThreshold (fddimibMACFrameErrorThreshold). This event is handled as a Condition in the Status Report Protocol (see 7.2.7 and 8.3).
TRAP-TYPE    

lpOptMACNotCopiedCondition 5
Generated when the fddiMACNotCopiedRatio (fddimibMACNotCopiedRatio) is greater than or equal to the fddiMACNotCopiedThreshold (lpOptMACNotCopiedThreshold). This event is handled as a Condition in the Status Report Protocol (see 7.2.7 and 8.3).
TRAP-TYPE    

lpOptMACNeighborChangeEvent 6
Generated when a change in a MAC's upstream neighbor address or downstream neighbor address is detected. (see 7.2.7 and 8.3).
TRAP-TYPE    

lpOptMACPathChangeEvent 7
This event is generated when the value of the fddiMACCurrentPath (fddimibMACCurrentPath) changes. This event shall be supressed if the value changes from isolated to local or local to isolated (see 7.2.7 and 8.3).
TRAP-TYPE    

lpOptPORTLerCondition 8
This condition becomes active when the value of fddiPORTLer-Estimate (fddimibPORTLerEstimate) is less than or equal to fddiPORTLer-Alarm (fddimibPORTLerAlarm). This will be reported with the Status Report Frames (SRF) (see 7.2.7 and 8.3).
TRAP-TYPE    

lpOptPORTUndesiredConnAttemptEvent 9
Generated when an undesired connection attempt has been made (see 5.2.4, 7.2.7, and 8.3).
TRAP-TYPE    

lpOptPORTEBErrorCondition 10
Generated when the Elasticity Buffer Error-Ct (lpOptPORTEBErrorCt) increments. This is handled as a condition in the Status Report Protocol. It is generated when an increment occurs in the station's sampling period (see 7.2.7 and 8.3).
TRAP-TYPE    

lpOptPORTPathChangeEvent 11
This event is generated when the value of the fddiPORTCurrentPath (lpOptPORTCurrentPath) changes. This event shall be surpressed if the value changes from isolated to local or local to isolated (see 7.2.7 and 8.3).
TRAP-TYPE