Juniper-QoS-MIB

File: Juniper-QoS-MIB.mib (105841 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
SNMPv2-CONF Juniper-MIBs

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Gauge32
Counter64 Unsigned32 Integer32
TEXTUAL-CONVENTION RowStatus TruthValue
DisplayString ifIndex MODULE-COMPLIANCE
OBJECT-GROUP juniMibs

Defined Types

JuniQosLogicalInterfaceType  
A logical interface type supported by QoS.
TEXTUAL-CONVENTION    
  BITS atmInterface(0), hdlcInterface(1), ethernetInterface(2), atm1483Interface(3), atmVirtualPath(4), ipInterface(5), ipv6Interface(6), vlanSubInterface(7), frameRelaySubInterface(8), cbfInterface(9), serverPortInterface(10), l2tpFromTunnelQueue(11), ipTunnelFromTunnelQueue(12), mplsMinorInterface(13), bridgeInterface(14), l2tpSessionInterface(15), stackedVlan(16), lagInterface(17)  

JuniQosTrafficClassEntry  
SEQUENCE    
  juniQosTrafficClassIndex Unsigned32
  juniQosTrafficClassRowStatus RowStatus
  juniQosTrafficClassName DisplayString
  juniQosTrafficClassWeight Unsigned32
  juniQosTrafficClassStrictPriority TruthValue
  juniQosTrafficClassUpdatePending TruthValue
  juniQosTrafficClassUpdateNow TruthValue
  juniQosTrafficClassIsReferencedByGroup TruthValue
  juniQosTrafficClassIsReferencedByQosProfile TruthValue

JuniQosTrafficClassGroupEntry  
SEQUENCE    
  juniQosTrafficClassGroupIndex Unsigned32
  juniQosTrafficClassGroupRowStatus RowStatus
  juniQosTrafficClassGroupName DisplayString
  juniQosTrafficClassGroupUpdatePending TruthValue
  juniQosTrafficClassGroupUpdateNow TruthValue
  juniQosTrafficClassGroupIsReferencedByQosProfile TruthValue
  juniQosTrafficClassGroupSlotNumber Integer32
  juniQosTrafficClassGroupExtendedGroup TruthValue

JuniQosTrafficClassGroupEntryEntry  
SEQUENCE    
  juniQosTrafficClassGroupEntryRowStatus RowStatus

JuniQosQueueProfileEntry  
SEQUENCE    
  juniQosQueueProfileIndex Unsigned32
  juniQosQueueProfileRowStatus RowStatus
  juniQosQueueProfileName DisplayString
  juniQosQueueProfileCommittedMinLength Unsigned32
  juniQosQueueProfileCommittedMaxLength Unsigned32
  juniQosQueueProfileConformedMinLength Unsigned32
  juniQosQueueProfileConformedMaxLength Unsigned32
  juniQosQueueProfileExceededMinLength Unsigned32
  juniQosQueueProfileExceededMaxLength Unsigned32
  juniQosQueueProfileConformedFraction Unsigned32
  juniQosQueueProfileExceededFraction Unsigned32
  juniQosQueueProfileCommittedDropThreshold Unsigned32
  juniQosQueueProfileCommittedDropRate Unsigned32
  juniQosQueueProfileConformedDropThreshold Unsigned32
  juniQosQueueProfileConformedDropRate Unsigned32
  juniQosQueueProfileExceededDropThreshold Unsigned32
  juniQosQueueProfileExceededDropRate Unsigned32
  juniQosQueueProfileBufferWeight Unsigned32
  juniQosQueueProfileUpdatePending TruthValue
  juniQosQueueProfileUpdateNow TruthValue
  juniQosQueueProfileIsReferencedByQosProfile TruthValue

JuniQosSchedulerProfileEntry  
SEQUENCE    
  juniQosSchedulerProfileIndex Unsigned32
  juniQosSchedulerProfileRowStatus RowStatus
  juniQosSchedulerProfileName DisplayString
  juniQosSchedulerProfileShapingRate Unsigned32
  juniQosSchedulerProfileBurst Unsigned32
  juniQosSchedulerProfileWeight Unsigned32
  juniQosSchedulerProfileStrictPriority TruthValue
  juniQosSchedulerProfileUpdatePending TruthValue
  juniQosSchedulerProfileUpdateNow TruthValue
  juniQosSchedulerProfileIsReferencedByQosProfile TruthValue
  juniQosSchedulerProfileAssuredRate Unsigned32
  juniQosSchedulerProfileSharedShapingRate Unsigned32
  juniQosSchedulerProfileSharedShapingBurstSize Unsigned32
  juniQosSchedulerProfileSharedShapingType INTEGER
  juniQosSchedulerProfileSharedShapingExplicitConstituents TruthValue
  juniQosSchedulerProfileSharedShapingPriority Integer32
  juniQosSchedulerProfileSharedShapingWeight Integer32

JuniQosProfileEntry  
SEQUENCE    
  juniQosProfileIndex Unsigned32
  juniQosProfileRowStatus RowStatus
  juniQosProfileName DisplayString
  juniQosProfileUpdatePending TruthValue
  juniQosProfileUpdateNow TruthValue
  juniQosProfileIsReferencedByInterfaceQosAttachment TruthValue
  juniQosProfileIsReferencedByQosPortTypeProfile TruthValue

JuniQosProfileElementEntry  
SEQUENCE    
  juniQosProfileElementEntryRowStatus RowStatus
  juniQosProfileElementEntryQueueProfile Unsigned32
  juniQosProfileElementEntrySchedulerProfile Unsigned32
  juniQosInterfaceType INTEGER
  juniQosProfileEntryType INTEGER
  juniQosProfileElementEntryDropProfile Unsigned32
  juniQosProfileElementEntryStatisticsProfile Unsigned32

JuniQosIfAttachEntry  
SEQUENCE    
  juniQosIfAttachIndex Unsigned32
  juniQosIfAttachRowStatus RowStatus
  juniQosIfAttachQosProfileIndex Unsigned32

JuniQosQosPortTypeProfileEntry  
SEQUENCE    
  juniQosQosPortTypeProfileIndex INTEGER
  juniQosQosPortTypeProfileRowStatus RowStatus
  juniQosQosPortTypeProfileQosProfileIndex Unsigned32

JuniQosQueueStatisticsEntry  
SEQUENCE    
  juniQosOutPacketForwarded Counter64
  juniQosOutBytesForwarded Counter64
  juniQosOutGreenPacketsSchedulerDrops Counter64
  juniQosOutYellowPacketsSchedulerDrops Counter64
  juniQosOutRedPacketsSchedulerDrops Counter64
  juniQosOutGreenBytesSchedulerDrops Counter64
  juniQosOutYellowBytesSchedulerDrops Counter64
  juniQosOutRedBytesSchedulerDrops Counter64

JuniQosDropProfileEntry  
SEQUENCE    
  juniQosDropProfileIndex Unsigned32
  juniQosDropProfileRowStatus RowStatus
  juniQosDropProfileName DisplayString
  juniQosDropProfileAverageLengthExponent Unsigned32
  juniQosDropProfileCommittedThresholdUnits INTEGER
  juniQosDropProfileCommittedThresholdMinThreshold Unsigned32
  juniQosDropProfileCommittedThresholdMaxThreshold Unsigned32
  juniQosDropProfileCommittedThresholdMaxDropProbability Unsigned32
  juniQosDropProfileConformedThresholdUnits INTEGER
  juniQosDropProfileConformedThresholdMinThreshold Unsigned32
  juniQosDropProfileConformedThresholdMaxThreshold Unsigned32
  juniQosDropProfileConformedThresholdMaxDropProbability Unsigned32
  juniQosDropProfileExceededThresholdUnits INTEGER
  juniQosDropProfileExceededThresholdMinThreshold Unsigned32
  juniQosDropProfileExceededThresholdMaxThreshold Unsigned32
  juniQosDropProfileExceededThresholdMaxDropProbability Unsigned32
  juniQosDropProfileUpdatePending TruthValue
  juniQosDropProfileUpdateNow TruthValue
  juniQosDropProfileIsReferencedByQosProfile TruthValue

JuniQosStatisticsProfileEntry  
SEQUENCE    
  juniQosStatisticsProfileIndex Unsigned32
  juniQosStatisticsProfileName DisplayString
  juniQosStatisticsProfileRowStatus RowStatus
  juniQosStatisticsProfileForwardingRateThreshold Unsigned32
  juniQosStatisticsProfileCommittedDropThreshold Unsigned32
  juniQosStatisticsProfileConformedDropThreshold Unsigned32
  juniQosStatisticsProfileExceededDropThreshold Unsigned32
  juniQosStatisticsProfileRatePeriod Unsigned32
  juniQosStatisticsProfileUpdatePending TruthValue
  juniQosStatisticsProfileUpdateNow TruthValue
  juniQosStatisticsProfileIsReferencedByQosProfile TruthValue

JuniQosQosModePortEntry  
SEQUENCE    
  juniQosQosModePortIndex Unsigned32
  juniQosQosModePortRowStatus RowStatus
  juniQosQosModePortFrameMode INTEGER

JuniQosQosShapingModeEntry  
SEQUENCE    
  juniQosQosShapingModeIndex Unsigned32
  juniQosQosShapingModeRowStatus RowStatus
  juniQosQosShapingModeShapingMode INTEGER

JuniQosSVlanUidTableEntry  
SEQUENCE    
  juniQosSVlanUidTablePortUid Unsigned32
  juniQosSVlanUidTableSVlanId Unsigned32
  juniQosSVlanUidTableSVlanUid Unsigned32

JuniQosSVlanIdTableEntry  
SEQUENCE    
  juniQosSVlanIdTableSVlanUid Unsigned32
  juniQosSVlanIdTablePortUid Unsigned32
  juniQosSVlanIdTableSVlanId Unsigned32

Defined Values

juniQosMIB 1.3.6.1.4.1.4874.2.2.57
The Quality of Service (QoS) MIB for the Juniper Networks enterprise.
MODULE-IDENTITY    

juniQosObjects 1.3.6.1.4.1.4874.2.2.57.1
OBJECT IDENTIFIER    

juniQosCapability 1.3.6.1.4.1.4874.2.2.57.1.1
OBJECT IDENTIFIER    

juniQos 1.3.6.1.4.1.4874.2.2.57.1.2
OBJECT IDENTIFIER    

juniQosTrafficClassList 1.3.6.1.4.1.4874.2.2.57.1.3
OBJECT IDENTIFIER    

juniQosTrafficClassGroupList 1.3.6.1.4.1.4874.2.2.57.1.4
OBJECT IDENTIFIER    

juniQosTrafficClassGroupEntryList 1.3.6.1.4.1.4874.2.2.57.1.5
OBJECT IDENTIFIER    

juniQosSchedulerProfileList 1.3.6.1.4.1.4874.2.2.57.1.6
OBJECT IDENTIFIER    

juniQosQueueProfileList 1.3.6.1.4.1.4874.2.2.57.1.7
OBJECT IDENTIFIER    

juniQosProfile 1.3.6.1.4.1.4874.2.2.57.1.8
OBJECT IDENTIFIER    

juniQosProfileElement 1.3.6.1.4.1.4874.2.2.57.1.9
OBJECT IDENTIFIER    

juniQosIfAttach 1.3.6.1.4.1.4874.2.2.57.1.10
OBJECT IDENTIFIER    

juniQosQosPortTypeProfile 1.3.6.1.4.1.4874.2.2.57.1.11
OBJECT IDENTIFIER    

juniQosQueueStatistics 1.3.6.1.4.1.4874.2.2.57.1.12
OBJECT IDENTIFIER    

juniQosDropProfileList 1.3.6.1.4.1.4874.2.2.57.1.13
OBJECT IDENTIFIER    

juniQosAtmVpUidSupport 1.3.6.1.4.1.4874.2.2.57.1.14
OBJECT IDENTIFIER    

juniQosStatisticsProfileList 1.3.6.1.4.1.4874.2.2.57.1.15
OBJECT IDENTIFIER    

juniQosQosModePortList 1.3.6.1.4.1.4874.2.2.57.1.16
OBJECT IDENTIFIER    

juniQosQosShapingModeList 1.3.6.1.4.1.4874.2.2.57.1.17
OBJECT IDENTIFIER    

juniQosSVlanUidSupport 1.3.6.1.4.1.4874.2.2.57.1.18
OBJECT IDENTIFIER    

juniQosSVlanIdSupport 1.3.6.1.4.1.4874.2.2.57.1.19
OBJECT IDENTIFIER    

juniQosMaxTrafficClass 1.3.6.1.4.1.4874.2.2.57.1.1.1
This object reflects the maximum number of traffic classes supported.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniQosMaxQueueLength 1.3.6.1.4.1.4874.2.2.57.1.1.2
This object reflects the maximum supported queue length in bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniQosMinSchedulerBurst 1.3.6.1.4.1.4874.2.2.57.1.1.3
This object reflects the minimum supported scheduler burst size in bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniQosMaxSchedulerBurst 1.3.6.1.4.1.4874.2.2.57.1.1.4
This object reflects the maximum supported scheduler burst size in bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniQosMaxQosProfileRules 1.3.6.1.4.1.4874.2.2.57.1.1.5
This object reflects the maximum number of rules per qos-profile supported.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniQosTrafficClassCount 1.3.6.1.4.1.4874.2.2.57.1.2.1
This object reflects the number of configured traffic classes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniQosQueueProfileCount 1.3.6.1.4.1.4874.2.2.57.1.2.2
This object reflects the number of configured queue profiles.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniQosSchedulerProfileCount 1.3.6.1.4.1.4874.2.2.57.1.2.3
This object reflects the number of configured scheduler profiles.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniQosProfileCount 1.3.6.1.4.1.4874.2.2.57.1.2.4
This object reflects the number of configured QoS profiles.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniQosInterfaceCount 1.3.6.1.4.1.4874.2.2.57.1.2.5
This object reflects the number of configured interface QoS attachments.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniQosQosPortTypeProfileCount 1.3.6.1.4.1.4874.2.2.57.1.2.6
This object reflects the number of configured default port profiles.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniQosDropProfileCount 1.3.6.1.4.1.4874.2.2.57.1.2.7
This object reflects the number of configured drop profiles.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniQosStatisticsProfileCount 1.3.6.1.4.1.4874.2.2.57.1.2.8
This object reflects the number of configured statistics profiles.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniQosTrafficClassNextIndex 1.3.6.1.4.1.4874.2.2.57.1.3.1
This scalar object returns the index of the next available row in the juniQosTrafficClassTable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniQosTrafficClassTable 1.3.6.1.4.1.4874.2.2.57.1.3.2
This table contains entries for elements of Traffic Class definitions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniQosTrafficClassEntry

juniQosTrafficClassEntry 1.3.6.1.4.1.4874.2.2.57.1.3.2.1
Each entry describes the characteristics of a traffic class element.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniQosTrafficClassEntry  

juniQosTrafficClassIndex 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.1
The number of the traffic class entry which is defined by this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

juniQosTrafficClassRowStatus 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.2
Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniQosTrafficClassRowStatus juniQosTrafficClassName
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniQosTrafficClassName 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.3
Specifies the name of the traffic class defined by this row.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

juniQosTrafficClassWeight 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.4
The relative weight for queues in this traffic class.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..63  

juniQosTrafficClassStrictPriority 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.5
The traffic to be dequeued before all other classes.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

juniQosTrafficClassUpdatePending 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.6
True if modifications have been made to the traffic class object which have not been committed to the line cards.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

juniQosTrafficClassUpdateNow 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.7
When set to true, modifications made to the traffic class object will be committed to the line cards.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

juniQosTrafficClassIsReferencedByGroup 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.8
When true, the traffic class is referenced by a traffic class group.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

juniQosTrafficClassIsReferencedByQosProfile 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.9
When true, the traffic class is referenced by a QoS profile.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

juniQosTrafficClassGroupNextIndex 1.3.6.1.4.1.4874.2.2.57.1.4.1
This scalar object returns the index of the next available row in the juniQosTrafficClassGroupTable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniQosTrafficClassGroupTable 1.3.6.1.4.1.4874.2.2.57.1.4.2
This table contains entries for elements of Traffic Class group definitions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniQosTrafficClassGroupEntry

juniQosTrafficClassGroupEntry 1.3.6.1.4.1.4874.2.2.57.1.4.2.1
Each entry describes the characteristics of a traffic class group element.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniQosTrafficClassGroupEntry  

juniQosTrafficClassGroupIndex 1.3.6.1.4.1.4874.2.2.57.1.4.2.1.1
The number of the traffic class entry which is defined by this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

juniQosTrafficClassGroupRowStatus 1.3.6.1.4.1.4874.2.2.57.1.4.2.1.2
Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniQosTrafficClassGroupRowStatus juniQosTrafficClassGroupName
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniQosTrafficClassGroupName 1.3.6.1.4.1.4874.2.2.57.1.4.2.1.3
Specifies the name of the traffic class group defined by this row.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

juniQosTrafficClassGroupUpdatePending 1.3.6.1.4.1.4874.2.2.57.1.4.2.1.4
True if modifications have been made to the traffic class group object which have not been committed to the line cards.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

juniQosTrafficClassGroupUpdateNow 1.3.6.1.4.1.4874.2.2.57.1.4.2.1.5
When set to true, modifications made to the traffic class group object will be committed to the line cards.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

juniQosTrafficClassGroupIsReferencedByQosProfile 1.3.6.1.4.1.4874.2.2.57.1.4.2.1.6
When true, the traffic class group is referenced by a QoS profile.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

juniQosTrafficClassGroupSlotNumber 1.3.6.1.4.1.4874.2.2.57.1.4.2.1.7
The number of the slot on which this traffic class group is applied. Traffic class groups may be global or local. Global groups indicate that the traffic class group is to be applied to each line card in the chassis. The value of this object is -1 for global traffic class groups. Local traffic class groups override global traffic class groups and are applied to the slot indicated by the value of this object.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..2147483647  

juniQosTrafficClassGroupExtendedGroup 1.3.6.1.4.1.4874.2.2.57.1.4.2.1.8
When true, the traffic class group is an extended group. False indicates the traffic class group is an auto-strict-priority group.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

juniQosTrafficClassGroupEntryTable 1.3.6.1.4.1.4874.2.2.57.1.5.1
This table identifies which traffic classes are in each traffic class group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniQosTrafficClassGroupEntryEntry

juniQosTrafficClassGroupEntryEntry 1.3.6.1.4.1.4874.2.2.57.1.5.1.1
Each entry ties a traffic class table entry to a traffic class group.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniQosTrafficClassGroupEntryEntry  

juniQosTrafficClassGroupEntryRowStatus 1.3.6.1.4.1.4874.2.2.57.1.5.1.1.1
Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry object MUST be explicitly configured: juniQosTrafficClassGroupEntryRowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniQosQueueProfileNextIndex 1.3.6.1.4.1.4874.2.2.57.1.7.1
This scalar object returns the index of the next available row in the juniQosQueueProfileTable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniQosQueueProfileTable 1.3.6.1.4.1.4874.2.2.57.1.7.2
This table contains entries for elements of queue profile definitions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniQosQueueProfileEntry

juniQosQueueProfileEntry 1.3.6.1.4.1.4874.2.2.57.1.7.2.1
Each entry describes the characteristics of a queue profile element.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniQosQueueProfileEntry  

juniQosQueueProfileIndex 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.1
The number of the queue profile entry which is defined by this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

juniQosQueueProfileRowStatus 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.2
Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniQosQueueProfileRowStatus juniQosQueueProfileName
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniQosQueueProfileName 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.3
Specifies the name of the queue profile defined by this row.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

juniQosQueueProfileCommittedMinLength 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.4
Specifies the minimum queue length in bytes for committed traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosQueueProfileCommittedMaxLength 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.5
Specifies the maximum queue length in bytes for committed traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosQueueProfileConformedMinLength 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.6
Specifies the minimum queue length in bytes for conformed traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosQueueProfileConformedMaxLength 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.7
Specifies the maximum queue length in bytes for conformed traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosQueueProfileExceededMinLength 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.8
Specifies the minimum queue length in bytes for exceeded traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosQueueProfileExceededMaxLength 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.9
Specifies the maximum queue length in bytes for exceeded traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosQueueProfileConformedFraction 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.10
Specifies the maximum percentage of queue occupied by conformed traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

juniQosQueueProfileExceededFraction 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.11
Specifies the maximum percentage of queue occupied by exceeded traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

juniQosQueueProfileCommittedDropThreshold 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.12
Specifies the drop threshold (percent of queue) for committed traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

juniQosQueueProfileCommittedDropRate 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.13
Specifies the drop rate (percent of traffic) for committed traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

juniQosQueueProfileConformedDropThreshold 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.14
Specifies the drop threshold (percent of queue) for comformed traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

juniQosQueueProfileConformedDropRate 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.15
Specifies the drop rate (percent of traffic) for comformed traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

juniQosQueueProfileExceededDropThreshold 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.16
Specifies the drop threshold (percent of queue) for exceeded traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

juniQosQueueProfileExceededDropRate 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.17
Specifies the drop rate (percent of traffic) for exceeded traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

juniQosQueueProfileBufferWeight 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.18
The relative weight for queues in this traffic class.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..63  

juniQosQueueProfileUpdatePending 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.19
True if modifications have been made to the queue profile object which have not been committed to the line cards.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

juniQosQueueProfileUpdateNow 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.20
When set to true, modifications made to the queue profile object will be committed to the line cards.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

juniQosQueueProfileIsReferencedByQosProfile 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.21
When true, the queue profile is referenced by a QoS profile.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

juniQosSchedulerProfileNextIndex 1.3.6.1.4.1.4874.2.2.57.1.6.1
This scalar object returns the index of the next available row in the juniQosSchedulerProfileTable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniQosSchedulerProfileTable 1.3.6.1.4.1.4874.2.2.57.1.6.2
This table contains entries for elements of Scheduler Profile definitions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniQosSchedulerProfileEntry

juniQosSchedulerProfileEntry 1.3.6.1.4.1.4874.2.2.57.1.6.2.1
Each entry describes the characteristics of a scheduler profile element.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniQosSchedulerProfileEntry  

juniQosSchedulerProfileIndex 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.1
The number of the scheduler profile entry which is defined by this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

juniQosSchedulerProfileRowStatus 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.2
Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniQosSchedulerProfileRowStatus juniQosSchedulerProfileName
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniQosSchedulerProfileName 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.3
Specifies the name of the scheduler profile defined by this row.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

juniQosSchedulerProfileShapingRate 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.4
Specifies the shaping rate in bits per second (bps). Values between 1 and 63999 are not supported.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..1000000000  

juniQosSchedulerProfileBurst 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.5
Specifies the catch-up burst size in bytes. Burst value of 0 indicates the largest burst size the system will allow without losing accuracy.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..522240  

juniQosSchedulerProfileWeight 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.6
The relative weight of the scheduler. When an assured rate is specified, this object is ignored.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4080  

juniQosSchedulerProfileStrictPriority 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.7
Specifies the traffic to be dequeued before all other scheduler nodes.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

juniQosSchedulerProfileUpdatePending 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.8
True if modifications have been made to the scheduler profile object which have not been committed to the line cards.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

juniQosSchedulerProfileUpdateNow 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.9
When set to true, modifications made to the scheduler profile object will be committed to the line cards.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

juniQosSchedulerProfileIsReferencedByQosProfile 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.10
When true, the scheduler profile is referenced by a QoS profile.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

juniQosSchedulerProfileAssuredRate 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.11
Specifies the assured rate in bits per second (bps). When this object has a non-default value, the scheduler weight (juniQosSchedulerProfileWeight) is ignored. A value of '4294967295' configures Hierarchical Assured Rate.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 25000..1000000000 | 4294967295  

juniQosSchedulerProfileSharedShapingRate 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.12
Specifies the shared shaping rate in bits per second (bps). The range of 1 to 63999 is not supported.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..1000000000  

juniQosSchedulerProfileSharedShapingBurstSize 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.13
Specifies the catch-up burst size for a shared shaping, in bytes. A value of zero indicates that the system should choose an appropriate default value.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..522240  

juniQosSchedulerProfileSharedShapingType 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.14
The value of this object specifies the type of shared shaping that is to be performed when shared shaping is enabled. Shared shaper types are defined as follows: 'simple' indicates that Simple Shared Shaping is performed regardless of the line cards capabilities. 'compound' indicates that Compound Shared Shaping is to be performed. When compound is specified for a line card that does not support Compound Shared Shaping, a warning message is logged, and Simple Shared Shaping is configured instead. 'auto' indicates that selection of the shared shaper should be automatic such that compound shared shaping is performed on line cards which support it and simple shared shaping is performed on line cards that do not support it.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), simple(1), compound(2), auto(3)  

juniQosSchedulerProfileSharedShapingExplicitConstituents 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.15
This option allows automatic shared shaper constituent selecting and bandwidth allocation to be overridden. By default, constituents are configured implicitly.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

juniQosSchedulerProfileSharedShapingPriority 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.16
The priority of a strict shared shaper constituent. When the value of juniQosSchedulerProfileSharedShaper- ConstituentType is 'strict' the value of this object determines the order in which the strict constituent can claim bandwidth. Priority values range from 1 to 8, with priority 1 getting first claim amongst strict constituents on available shared bandwidth, and priority 8 getting final claim amongst strict constituents on available bandwidth. When two or more strict constituents have the same priority value, the rules used for implicit bandwidth allocation are applied to determine their order. A value of zero indicates 'not a constituent' of a shared shaper. A value of -1 indicates 'is a constituent' of a shared shaper, but the system is free to choose whether the constituent is 'strict-priority' of 'weighted' This object takes precedence over the juniQosSchedulerProfileSharedShapingWeight object. When set to a value from 1 to 8 the system sets the value of juniQosSchedulerProfileSharedShaping- Weight to zero.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..8  

juniQosSchedulerProfileSharedShapingWeight 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.17
The weight of a weighted shared shaper constituent. When the value of juniQosSchedulerProfileSharedShaper- ConstituentType is 'weighted' the value of this object determines the proportion of the weighted constituent's bandwidth Non-zero values specify the weight of a weighted shared shaping constituent. A value of zero indicates 'not a constituent' of a shared shaper. A value of -1 indicates 'is a constituent' of a shared shaper, but the system is free to choose whether the constituent is 'strict-priority' of 'weighted' The juniQosSchedulerProfileSharedShapingPriority has precedence over the this object.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..31  

juniQosProfileNextIndex 1.3.6.1.4.1.4874.2.2.57.1.8.1
This scalar object returns the index of the next available row in the juniQosProfileTable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniQosProfileTable 1.3.6.1.4.1.4874.2.2.57.1.8.2
This table contains entries for elements of QoS Profile definitions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniQosProfileEntry

juniQosProfileEntry 1.3.6.1.4.1.4874.2.2.57.1.8.2.1
Each entry describes the characteristics of a QoS profile element.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniQosProfileEntry  

juniQosProfileIndex 1.3.6.1.4.1.4874.2.2.57.1.8.2.1.1
The number identifies this QoS profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

juniQosProfileRowStatus 1.3.6.1.4.1.4874.2.2.57.1.8.2.1.2
Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create a QoS profile in this table, the following entry objects MUST be explicitly configured: juniQosProfileRowStatus juniQosProfileName
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniQosProfileName 1.3.6.1.4.1.4874.2.2.57.1.8.2.1.3
Specifies the name of the QoS profile defined by this row.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

juniQosProfileUpdatePending 1.3.6.1.4.1.4874.2.2.57.1.8.2.1.4
True if modifications have been made to the QoS profile object which have not been committed to the line cards.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

juniQosProfileUpdateNow 1.3.6.1.4.1.4874.2.2.57.1.8.2.1.5
When set to true, modifications made to the QoS profile object will be committed to the line cards.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

juniQosProfileIsReferencedByInterfaceQosAttachment 1.3.6.1.4.1.4874.2.2.57.1.8.2.1.6
When true, the QoS profile is referenced by an interface QoS attachment.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

juniQosProfileIsReferencedByQosPortTypeProfile 1.3.6.1.4.1.4874.2.2.57.1.8.2.1.7
When true, the QoS profile is referenced by a QoS port type profile.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

juniQosProfileElementTable 1.3.6.1.4.1.4874.2.2.57.1.9.1
This table contains entries for elements of QoS profile definitions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniQosProfileElementEntry

juniQosProfileElementEntry 1.3.6.1.4.1.4874.2.2.57.1.9.1.1
Each entry describes the characteristics of a QoS profile element.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniQosProfileElementEntry  

juniQosProfileElementEntryRowStatus 1.3.6.1.4.1.4874.2.2.57.1.9.1.1.1
Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry object MUST be explicitly configured: juniQosProfileRowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniQosProfileElementEntryQueueProfile 1.3.6.1.4.1.4874.2.2.57.1.9.1.1.2
Specifies the queue profile assigned to the QoS entry.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosProfileElementEntrySchedulerProfile 1.3.6.1.4.1.4874.2.2.57.1.9.1.1.3
Specifies the scheduler profile assigned to the QoS entry.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosInterfaceType 1.3.6.1.4.1.4874.2.2.57.1.9.1.1.4
The QoS interface type ID, part of the index for juniQosProfileElementTable. Please note that if the juniQpsProfileEntryType is trafficClassGroup, then only ethernet, atm, serial, and serverPort are valid interface types.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER ip(0), ethernet(6), atm(9), atmVc(11), serial(13), frVc(16), l2tpSession(21), serverPort(31), vlan(35), cbf(36), ipv6(50), l2tpTunnel(150), ipTunnel(151), atmVp(163), svlan(174)  

juniQosProfileEntryType 1.3.6.1.4.1.4874.2.2.57.1.9.1.1.5
The QoS profile type, part of the index for juniQosProfileElementTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER trafficClass(1), schedulerProfile(2), trafficClassGroup(3), shadowNode(4)  

juniQosProfileElementEntryDropProfile 1.3.6.1.4.1.4874.2.2.57.1.9.1.1.6
Specifies the drop profile assigned to the QoS entry.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosProfileElementEntryStatisticsProfile 1.3.6.1.4.1.4874.2.2.57.1.9.1.1.7
Specifies the statistics profile assigned to the QoS entry.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosIfAttachTable 1.3.6.1.4.1.4874.2.2.57.1.10.1
This table contains entries which represent attachment of QoS to interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniQosIfAttachEntry

juniQosIfAttachEntry 1.3.6.1.4.1.4874.2.2.57.1.10.1.1
Each entry contains the attachment of QoS to an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniQosIfAttachEntry  

juniQosIfAttachIndex 1.3.6.1.4.1.4874.2.2.57.1.10.1.1.1
The interface number representing the interface to which QoS has been attached.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

juniQosIfAttachRowStatus 1.3.6.1.4.1.4874.2.2.57.1.10.1.1.2
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy juniQosIfAttachQosProfileIndex must be specified when creating the row. *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list. destroy Destroy the specified list and all of its constituent elements.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniQosIfAttachQosProfileIndex 1.3.6.1.4.1.4874.2.2.57.1.10.1.1.3
The QoS profile attached to this interface.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosQosPortTypeProfileTable 1.3.6.1.4.1.4874.2.2.57.1.11.1
This table contains entries which represent attachment of QoS to interface types with which they are associated.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniQosQosPortTypeProfileEntry

juniQosQosPortTypeProfileEntry 1.3.6.1.4.1.4874.2.2.57.1.11.1.1
Each entry contains the attachment of QoS to an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniQosQosPortTypeProfileEntry  

juniQosQosPortTypeProfileIndex 1.3.6.1.4.1.4874.2.2.57.1.11.1.1.1
The interface number representing the types of interface to which QoS has been attached.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER ethernet(6), atm(9), serial(13), serverPort(31), lag(54)  

juniQosQosPortTypeProfileRowStatus 1.3.6.1.4.1.4874.2.2.57.1.11.1.1.2
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy juniQosQosPortTypeProfileQosProfileIndex must be specified when creating the row. *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list. destroy Destroy the specified list and all of its constituent elements.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniQosQosPortTypeProfileQosProfileIndex 1.3.6.1.4.1.4874.2.2.57.1.11.1.1.3
The QoS profile assigned to this port type.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosQueueStatisticsTable 1.3.6.1.4.1.4874.2.2.57.1.12.1
Each entry within this table contains queue statistics for an interface/traffic class combination.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniQosQueueStatisticsEntry

juniQosQueueStatisticsEntry 1.3.6.1.4.1.4874.2.2.57.1.12.1.1
Each entry defines a single queue statistics entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniQosQueueStatisticsEntry  

juniQosOutPacketForwarded 1.3.6.1.4.1.4874.2.2.57.1.12.1.1.1
The number of packets queued on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniQosOutBytesForwarded 1.3.6.1.4.1.4874.2.2.57.1.12.1.1.2
The number of bytes queued on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniQosOutGreenPacketsSchedulerDrops 1.3.6.1.4.1.4874.2.2.57.1.12.1.1.3
The number of green packets dropped on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniQosOutYellowPacketsSchedulerDrops 1.3.6.1.4.1.4874.2.2.57.1.12.1.1.4
The number of yellow packets dropped on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniQosOutRedPacketsSchedulerDrops 1.3.6.1.4.1.4874.2.2.57.1.12.1.1.5
The number of red packets dropped on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniQosOutGreenBytesSchedulerDrops 1.3.6.1.4.1.4874.2.2.57.1.12.1.1.6
The number of green bytes dropped on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniQosOutYellowBytesSchedulerDrops 1.3.6.1.4.1.4874.2.2.57.1.12.1.1.7
The number of yellow bytes dropped on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniQosOutRedBytesSchedulerDrops 1.3.6.1.4.1.4874.2.2.57.1.12.1.1.8
The number of red bytes dropped on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniQosAtmVpUidValid 1.3.6.1.4.1.4874.2.2.57.1.14.1
This object reflects the status of the ATM VP UID translation objects.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER valid(0), badPortInterfaceUid(1), badPath(2), badAtmVpUid(3)  

juniQosAtmVpAtmPortInterfaceUid 1.3.6.1.4.1.4874.2.2.57.1.14.2
This object is the ATM port interface UID which correlates to the ATM VP UID object.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

juniQosAtmVpAtmPath 1.3.6.1.4.1.4874.2.2.57.1.14.3
This object is the ATM VP which correlates to the ATM VP UID object.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

juniQosAtmVpUid 1.3.6.1.4.1.4874.2.2.57.1.14.4
This object is the ATM VP UID which correlates to the ATM port interface and path objects.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

juniQosDropProfileNextIndex 1.3.6.1.4.1.4874.2.2.57.1.13.1
This scalar object returns the index of the next available row in the juniQosDropProfileTable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniQosDropProfileTable 1.3.6.1.4.1.4874.2.2.57.1.13.2
This table contains entries for elements of drop profile definitions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniQosDropProfileEntry

juniQosDropProfileEntry 1.3.6.1.4.1.4874.2.2.57.1.13.2.1
Each entry describes the characteristics of a drop profile element.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniQosDropProfileEntry  

juniQosDropProfileIndex 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.1
The number of the drop profile entry which is defined by this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

juniQosDropProfileRowStatus 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.2
Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniQosDropProfileRowStatus juniQosDropProfileName
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniQosDropProfileName 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.3
Specifies the name of the drop profile defined by this row.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

juniQosDropProfileAverageLengthExponent 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.4
Specifies the exponent used to weight the average queue length over time, controlling RED responsiveness. A non-default value enables the average queue length calculation.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..20  

juniQosDropProfileCommittedThresholdUnits 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.5
Specifies the units for the committed minimum and maximum thresholds.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER bytes(1), percent(2)  

juniQosDropProfileCommittedThresholdMinThreshold 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.6
Specifies the minimum drop threshold for committed traffic. The units are defined by juniQosDropProfileCommittedThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If units are percent, the value must be in the range of 1..100.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosDropProfileCommittedThresholdMaxThreshold 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.7
Specifies the maximum drop threshold for committed traffic. The units are defined by juniQosDropProfileCommittedThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If units are percent, the value must be in the range of 1..100. Setting the minimum and maximum thresholds to 0 disables the threshold.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosDropProfileCommittedThresholdMaxDropProbability 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.8
Specifies the maximum drop probability for committed traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

juniQosDropProfileConformedThresholdUnits 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.9
Specifies the units for the conformed minimum and maximum thresholds.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER bytes(1), percent(2)  

juniQosDropProfileConformedThresholdMinThreshold 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.10
Specifies the minimum drop threshold for conformed traffic. The units are defined by juniQosDropProfileConformedThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If units are percent, the value must be in the range of 1..100.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosDropProfileConformedThresholdMaxThreshold 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.11
Specifies the maximum drop threshold for conformed traffic. The units are defined by juniQosDropProfileConformedThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If units are percent, the value must be in the range of 1..100. Setting the minimum and maximum thresholds to 0 disables the threshold.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosDropProfileConformedThresholdMaxDropProbability 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.12
Specifies the maximum drop probability for conformed traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

juniQosDropProfileExceededThresholdUnits 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.13
Specifies the units for the exceeded minimum and maximum thresholds.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER bytes(1), percent(2)  

juniQosDropProfileExceededThresholdMinThreshold 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.14
Specifies the minimum drop threshold for exceeded traffic. The units are defined by juniQosDropProfileExceededThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If units are percent, the value must be in the range of 1..100.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosDropProfileExceededThresholdMaxThreshold 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.15
Specifies the maximum drop threshold for exceeded traffic. The units are defined by juniQosDropProfileExceededThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If units are percent, the value must be in the range of 1..100. Setting the minimum and maximum thresholds to 0 disables the threshold.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosDropProfileExceededThresholdMaxDropProbability 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.16
Specifies the maximum drop probability for exceeded traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

juniQosDropProfileUpdatePending 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.17
True if modifications have been made to the drop profile object which have not been committed to the line cards.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

juniQosDropProfileUpdateNow 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.18
When set to true, modifications made to the drop profile object will be committed to the line cards.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

juniQosDropProfileIsReferencedByQosProfile 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.19
True if the drop profile is referenced by QoS profile(s).
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

juniQosStatisticsProfileNextIndex 1.3.6.1.4.1.4874.2.2.57.1.15.1
This scalar object returns the index of the next available row in the juniQosStatsProfileTable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniQosStatisticsProfileTable 1.3.6.1.4.1.4874.2.2.57.1.15.2
This table contains entries for elements of Statistics Profile definitions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniQosStatisticsProfileEntry

juniQosStatisticsProfileEntry 1.3.6.1.4.1.4874.2.2.57.1.15.2.1
Each entry describes the characteristics of a statstics profile element.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniQosStatisticsProfileEntry  

juniQosStatisticsProfileIndex 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.1
The number of the statistics profile entry which is defined by this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

juniQosStatisticsProfileRowStatus 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.2
Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniQosStatisticsProfileRowStatus juniQosStatisticsProfileName
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniQosStatisticsProfileName 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.3
Specifies the name of the statistics profile defined by this row.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

juniQosStatisticsProfileForwardingRateThreshold 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.4
Specifies the forwarding rate threshold.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosStatisticsProfileCommittedDropThreshold 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.5
Specifies the committed drop threshold.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosStatisticsProfileConformedDropThreshold 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.6
Specifies the conformed drop threshold.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosStatisticsProfileExceededDropThreshold 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.7
Specifies the exceeded drop threshold.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosStatisticsProfileRatePeriod 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.8
Specifies the rate period over which forwarding and drop thresholds are calculated
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniQosStatisticsProfileUpdatePending 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.9
True if modifications have been made to the statistics profile object which have not been committed to the line cards.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

juniQosStatisticsProfileUpdateNow 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.10
When set to true, modifications made to the statistics profile object will be committed to the line cards.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

juniQosStatisticsProfileIsReferencedByQosProfile 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.11
True if the statistics profile is referenced by QoS profile(s).
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

juniQosQosModePortTable 1.3.6.1.4.1.4874.2.2.57.1.16.1
This table contains entries for elements of QoS mode port definitions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniQosQosModePortEntry

juniQosQosModePortEntry 1.3.6.1.4.1.4874.2.2.57.1.16.1.1
Each entry describes the characteristics of a QoS mode port element.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniQosQosModePortEntry  

juniQosQosModePortIndex 1.3.6.1.4.1.4874.2.2.57.1.16.1.1.1
The ATM port interface for which this row defines QoS mode port settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

juniQosQosModePortRowStatus 1.3.6.1.4.1.4874.2.2.57.1.16.1.1.2
Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniQosQosModePortRowStatus juniQosQosModePortFrameMode
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniQosQosModePortFrameMode 1.3.6.1.4.1.4874.2.2.57.1.16.1.1.3
Specifies the frame mode for this ATM port interface. lowCdv mode can not be configured unless juniQosQosShapingModeShapingMode for the ATM port interface is configured as 'cell'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER lowCdv(0), lowLatency(1)  

juniQosQosShapingModeTable 1.3.6.1.4.1.4874.2.2.57.1.17.1
This table contains entries for elements of QoS shaping mode definitions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniQosQosShapingModeEntry

juniQosQosShapingModeEntry 1.3.6.1.4.1.4874.2.2.57.1.17.1.1
Each entry describes the characteristics of a QoS shaping mode element.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniQosQosShapingModeEntry  

juniQosQosShapingModeIndex 1.3.6.1.4.1.4874.2.2.57.1.17.1.1.1
The ATM port interface for which this row defines QoS shaping mode port settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

juniQosQosShapingModeRowStatus 1.3.6.1.4.1.4874.2.2.57.1.17.1.1.2
Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniQosQosShapingModeRowStatus juniQosQosShapingModeShapingMode
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniQosQosShapingModeShapingMode 1.3.6.1.4.1.4874.2.2.57.1.17.1.1.3
Specifies the QoS shaping mode for this ATM port interface. 'frame' indicates shaping is to be based on frames, not including cell encapsulation and padding. 'cell' indicates shaping is to be based on cells, with cell encapsulation and padding included. 'frame' mode can not be configured unless juniQosQosModePortFrameMode for the ATM port interface is configured as 'lowLatency'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER frame(0), cell(1)  

juniQosSVlanUidTable 1.3.6.1.4.1.4874.2.2.57.1.18.1
This table contains an entry for each possible stacked vlan UID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniQosSVlanUidTableEntry

juniQosSVlanUidTableEntry 1.3.6.1.4.1.4874.2.2.57.1.18.1.1
Each entry is a stacked vlan UID.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniQosSVlanUidTableEntry  

juniQosSVlanUidTablePortUid 1.3.6.1.4.1.4874.2.2.57.1.18.1.1.1
The UID of the Ethernet port on which the stacked vlan is defined
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

juniQosSVlanUidTableSVlanId 1.3.6.1.4.1.4874.2.2.57.1.18.1.1.2
The stacked vlan ID
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4095  

juniQosSVlanUidTableSVlanUid 1.3.6.1.4.1.4874.2.2.57.1.18.1.1.3
The stacked vlan UID
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniQosSVlanIdTable 1.3.6.1.4.1.4874.2.2.57.1.19.1
This table contains an entry for each possible Ethernet port/stacked vlan id.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniQosSVlanIdTableEntry

juniQosSVlanIdTableEntry 1.3.6.1.4.1.4874.2.2.57.1.19.1.1
Each entry is a stacked vlan Ethernet port/stacked vlan ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniQosSVlanIdTableEntry  

juniQosSVlanIdTableSVlanUid 1.3.6.1.4.1.4874.2.2.57.1.19.1.1.1
The stacked vlan UID
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

juniQosSVlanIdTablePortUid 1.3.6.1.4.1.4874.2.2.57.1.19.1.1.2
The UID of the Ethernet port on which the stacked vlan is defined
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniQosSVlanIdTableSVlanId 1.3.6.1.4.1.4874.2.2.57.1.19.1.1.3
The stacked vlan ID
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4095  

juniQosConformance 1.3.6.1.4.1.4874.2.2.57.2
OBJECT IDENTIFIER    

juniQosCompliances 1.3.6.1.4.1.4874.2.2.57.2.1
OBJECT IDENTIFIER    

juniQosGroups 1.3.6.1.4.1.4874.2.2.57.2.2
OBJECT IDENTIFIER    

juniQosCompliance 1.3.6.1.4.1.4874.2.2.57.2.1.1
Obsolete compliance statement for entities which implement the Juniper QoS management MIB. This statement became obsolete when drop profile list support was added.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

juniQosCompliance2 1.3.6.1.4.1.4874.2.2.57.2.1.2
Obsolete compliance statement for entities which implement the Juniper QoS management MIB. This statement became obsolete when ATM VP UID, statistics profile list and QoS mode port support was added.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

juniQosCompliance3 1.3.6.1.4.1.4874.2.2.57.2.1.3
Obsolete compliance statement for entities which implement the Juniper QoS management MIB. This statement became obsolete when multiple traffic class group support was added.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

juniQosCompliance4 1.3.6.1.4.1.4874.2.2.57.2.1.4
The compliance statement for entities which implement the Juniper QoS management MIB.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

juniQosCompliance5 1.3.6.1.4.1.4874.2.2.57.2.1.5
The compliance statement for entities which implement the Juniper QoS management MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

juniQosCompliance6 1.3.6.1.4.1.4874.2.2.57.2.1.6
The compliance statement for entities which implement the Juniper QoS management MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

juniQosCapabilityGroup 1.3.6.1.4.1.4874.2.2.57.2.2.1
This group defines QoS application-wide capabilities management.
Status: current Access: read-only
OBJECT-GROUP    

juniQosScalarGroup 1.3.6.1.4.1.4874.2.2.57.2.2.2
This obsolete group defines QoS application-wide counters. This group became obsolete when drop profile list support was added.
Status: obsolete Access: read-only
OBJECT-GROUP    

juniQosTrafficClassListGroup 1.3.6.1.4.1.4874.2.2.57.2.2.3
This group defines QoS traffic class management.
Status: current Access: read-only
OBJECT-GROUP    

juniQosTrafficClassGroupListGroup 1.3.6.1.4.1.4874.2.2.57.2.2.4
This obsolete group defines QoS traffic class group management. This group became obsolete when multiple traffic class group support was added.
Status: obsolete Access: read-only
OBJECT-GROUP    

juniQosQueueProfileListGroup 1.3.6.1.4.1.4874.2.2.57.2.2.5
This group defines QoS queue profile management.
Status: current Access: read-only
OBJECT-GROUP    

juniQosSchedulerProfileListGroup 1.3.6.1.4.1.4874.2.2.57.2.2.6
This obsolete group defines QoS scheduler profile management. This group became obsolete when assured rate support was added.
Status: obsolete Access: read-only
OBJECT-GROUP    

juniQosProfileListGroup 1.3.6.1.4.1.4874.2.2.57.2.2.7
This group defines QoS profile management.
Status: current Access: read-only
OBJECT-GROUP    

juniQosProfileElementGroup 1.3.6.1.4.1.4874.2.2.57.2.2.8
This obsolete group defines QoS profile element entry management. This group became obsolete when drop profile list support was added.
Status: obsolete Access: read-only
OBJECT-GROUP    

juniQosIfAttachGroup 1.3.6.1.4.1.4874.2.2.57.2.2.9
This group defines QoS interface attachment management.
Status: current Access: read-only
OBJECT-GROUP    

juniQosQosPortTypeProfileGroup 1.3.6.1.4.1.4874.2.2.57.2.2.10
This group defines QoS default port profile management.
Status: current Access: read-only
OBJECT-GROUP    

juniQosQueueStatisticsGroup 1.3.6.1.4.1.4874.2.2.57.2.2.11
This group defines QoS queue statistics reporting.
Status: current Access: read-only
OBJECT-GROUP    

juniQosScalarGroup2 1.3.6.1.4.1.4874.2.2.57.2.2.12
This obsolete group defines QoS application-wide counters. This group became obsolete when statistics profile list support was added.
Status: obsolete Access: read-only
OBJECT-GROUP    

juniQosProfileElementGroup2 1.3.6.1.4.1.4874.2.2.57.2.2.13
This obsolete group defines QoS profile element entry management. This group became obsolete when statistics profile list support was added.
Status: obsolete Access: read-only
OBJECT-GROUP    

juniQosDropProfileListGroup 1.3.6.1.4.1.4874.2.2.57.2.2.14
This group defines QoS drop profile management.
Status: current Access: read-only
OBJECT-GROUP    

juniQosAtmVpUidSupportGroup 1.3.6.1.4.1.4874.2.2.57.2.2.15
This group defines QoS ATM VP UID support.
Status: current Access: read-only
OBJECT-GROUP    

juniQosScalarGroup3 1.3.6.1.4.1.4874.2.2.57.2.2.16
This group defines QoS application-wide counters.
Status: current Access: read-only
OBJECT-GROUP    

juniQosProfileElementGroup3 1.3.6.1.4.1.4874.2.2.57.2.2.17
This group defines QoS profile element entry management.
Status: current Access: read-only
OBJECT-GROUP    

juniQosStatisticsProfileListGroup 1.3.6.1.4.1.4874.2.2.57.2.2.18
This group defines QoS statistics profile management.
Status: current Access: read-only
OBJECT-GROUP    

juniQosSchedulerProfileListGroup2 1.3.6.1.4.1.4874.2.2.57.2.2.19
This group defines QoS scheduler profile management.
Status: current Access: read-only
OBJECT-GROUP    

juniQosQosModePortGroup 1.3.6.1.4.1.4874.2.2.57.2.2.20
This group defines QoS mode port management.
Status: current Access: read-only
OBJECT-GROUP    

juniQosQosShapingModeGroup 1.3.6.1.4.1.4874.2.2.57.2.2.21
This group defines QoS shaping mode management.
Status: current Access: read-only
OBJECT-GROUP    

juniQosTrafficClassGroupListGroup2 1.3.6.1.4.1.4874.2.2.57.2.2.22
This group defines QoS traffic class group management.
Status: current Access: read-only
OBJECT-GROUP    

juniQosSchedulerProfileListGroup3 1.3.6.1.4.1.4874.2.2.57.2.2.23
This group defines QoS scheduler profile management.
Status: current Access: read-only
OBJECT-GROUP    

juniQosSchedulerProfileListGroup4 1.3.6.1.4.1.4874.2.2.57.2.2.24
This group defines QoS scheduler profile management.
Status: current Access: read-only
OBJECT-GROUP    

juniQosSVlanUidSupportGroup 1.3.6.1.4.1.4874.2.2.57.2.2.25
This group defines QoS stacked vlan UID listing support.
Status: current Access: read-only
OBJECT-GROUP    

juniQosSVlanIdSupportGroup 1.3.6.1.4.1.4874.2.2.57.2.2.26
This group defines QoS stacked vlan port/id listing support.
Status: current Access: read-only
OBJECT-GROUP