Juniper-PPPoE-Profile-CONF

File: Juniper-PPPoE-Profile-CONF.mib (5955 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF Juniper-Agents

Imported symbols

MODULE-IDENTITY AGENT-CAPABILITIES juniProfileAgents

Defined Values

juniPppoeProfileAgent 1.3.6.1.4.1.4874.5.2.34.4
The agent capabilities definitions for the PPPoE Profile component of the SNMP agent in the Juniper E-series family of products.
MODULE-IDENTITY    

juniPppoeProfileAgentV1 1.3.6.1.4.1.4874.5.2.34.4.1
The MIB supported by the SNMP agent for the PPPoE Profile application in JUNOSe. These capabilities became obsolete when the duplicate MAC address indicator and AC-NAME were added.
AGENT-CAPABILITIES    

juniPppoeProfileAgentV2 1.3.6.1.4.1.4874.5.2.34.4.2
The MIB supported by the SNMP agent for the PPPoE Profile application in JUNOSe. These capabilities became obsolete when support was added for PADI flag and packet trace.
AGENT-CAPABILITIES    

juniPppoeProfileAgentV3 1.3.6.1.4.1.4874.5.2.34.4.3
The MIB supported by the SNMP agent for the PPPoE Profile application in JUNOSe. These capabilities became obsolete when service name table support was added.
AGENT-CAPABILITIES    

juniPppoeProfileAgentV4 1.3.6.1.4.1.4874.5.2.34.4.4
The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. These capabilities became obsolete when PADR remote-circuit-id field was added.
AGENT-CAPABILITIES    

juniPppoeProfileAgentV5 1.3.6.1.4.1.4874.5.2.34.4.5
The MIB supported by the SNMP agent for the PPPoE Profile application in JUNOSe.
AGENT-CAPABILITIES    

juniPppoeProfileAgentV6 1.3.6.1.4.1.4874.5.2.34.4.6
The MIB supported by the SNMP agent for the PPPoE Profile application in JUNOSe.
AGENT-CAPABILITIES