Juniper-HTTP-Profile-MIB

File: Juniper-HTTP-Profile-MIB.mib (6048 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
Juniper-MIBs Juniper-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
MODULE-COMPLIANCE OBJECT-GROUP DisplayString
juniMibs JuniSetMap

Defined Types

JuniHttpProfileEntry  
SEQUENCE    
  juniHttpProfileId Unsigned32
  juniHttpProfileSetMap JuniSetMap
  juniHttpProfileRedirectUrl DisplayString

Defined Values

juniHttpProfileMIB 1.3.6.1.4.1.4874.2.2.79
The HTTP rofile MIB for the Juniper Networks, Inc. enterprise.
MODULE-IDENTITY    

juniHttpProfileObjects 1.3.6.1.4.1.4874.2.2.79.1
OBJECT IDENTIFIER    

juniHttpProfile 1.3.6.1.4.1.4874.2.2.79.1.1
OBJECT IDENTIFIER    

juniHttpProfileTable 1.3.6.1.4.1.4874.2.2.79.1.1.1
This table contains profiles for configuring bulk ATM circuits. Entries in this table are created/deleted as a side-effect of corresponding operations to the juniProfileNameTable in the Juniper-PROFILE-MIB.
OBJECT-TYPE    
  SEQUENCE OF  
    JuniHttpProfileEntry

juniHttpProfileEntry 1.3.6.1.4.1.4874.2.2.79.1.1.1.1
A profile describing VCC configuration of an ATM subinterface.
OBJECT-TYPE    
  JuniHttpProfileEntry  

juniHttpProfileId 1.3.6.1.4.1.4874.2.2.79.1.1.1.1.1
The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the juniProfileNameTable.
OBJECT-TYPE    
  Unsigned32  

juniHttpProfileSetMap 1.3.6.1.4.1.4874.2.2.79.1.1.1.1.2
A bitmap representing which objects in this entry have been explicitly configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for details of use. The INDEX object(s) and this object are excluded from representation (i.e. their bits are never set). When a SET request does not explicitly configure JuniSetMap, bits in JuniSetMap are set as a side-effect of configuring other profile attributes in the same entry. If, however, a SET request explicitly configures JuniSetMap, the explicitly configured value overrides 1) any previous bit settings, and 2) any simultaneous 'side-effect' settings that would otherwise occur. Once set, bits can only be cleared by explicitly configuring JuniSetMap.
OBJECT-TYPE    
  JuniSetMap  

juniHttpProfileRedirectUrl 1.3.6.1.4.1.4874.2.2.79.1.1.1.1.3
This object is a 64 byte string that will be used as the redirect URL when requests arrive at the HTTP server over the Ip Interface configured.
OBJECT-TYPE    
  DisplayString Size(0..64)  

juniHttpProfileConformance 1.3.6.1.4.1.4874.2.2.79.4
OBJECT IDENTIFIER    

juniHttpProfileCompliances 1.3.6.1.4.1.4874.2.2.79.4.1
OBJECT IDENTIFIER    

juniHttpProfileGroups 1.3.6.1.4.1.4874.2.2.79.4.2
OBJECT IDENTIFIER    

juniHttpProfileCompliance 1.3.6.1.4.1.4874.2.2.79.4.1.1
Compliance statement for entities which implement the Juniper HTTP Profile MIB.
MODULE-COMPLIANCE    

juniHttpProfileGroup 1.3.6.1.4.1.4874.2.2.79.4.2.1
Current collection of objects providing management of profile functionality for per Interface HTTP objects in a Juniper product.
OBJECT-GROUP