JUNIPER-WX-MIB
File:
JUNIPER-WX-MIB.mib (49205 bytes)
Imported modules
Imported symbols
Defined Types
| JuniperWxAsmEntry |
|
| SEQUENCE |
|
|
|
| |
jnxWxAsmIndex |
Integer32 |
|
| |
jnxWxAsmIpAddress |
IpAddress |
|
| JuniperWxAsmStatsEntry |
|
| SEQUENCE |
|
|
|
| |
jnxWxAsmStatsPktsIn |
Counter64 |
|
| |
jnxWxAsmStatsPktsOut |
Counter64 |
|
| |
jnxWxAsmStatsBytesIn |
Counter64 |
|
| |
jnxWxAsmStatsBytesOut |
Counter64 |
|
| JnxWxVirtEndptEntry |
|
| SEQUENCE |
|
|
|
| |
jnxWxVirtEndptIndex |
Integer32 |
|
| |
jnxWxVirtEndptName |
TcAppName |
|
| |
jnxWxVirtEndptSubnetCount |
Integer32 |
|
| JuniperWxAppEntry |
|
| SEQUENCE |
|
|
|
| |
jnxWxAppIndex |
Integer32 |
|
| |
jnxWxAppAppName |
TcAppName |
|
| JuniperWxAppStatsEntry |
|
| SEQUENCE |
|
|
|
| |
jnxWxAppStatsBytesIn |
Counter64 |
|
| |
jnxWxAppStatsBytesOut |
Counter64 |
|
| |
jnxWxAppStatsBytesInPercent |
Gauge32 |
|
| |
jnxWxAppStatsAppName |
TcAppName |
|
| |
jnxWxAppStatsAccelBytesIn |
Counter64 |
|
| |
jnxWxAppStatsActiveSessionTime |
Counter64 |
|
| |
jnxWxAppStatsEstBoostBytes |
Counter64 |
|
| |
jnxWxAppStatsBytesOutWxc |
Counter64 |
|
| JuniperWxAppAggrStatsEntry |
|
| SEQUENCE |
|
|
|
| |
jnxWxAppAggrStatsBytesInRe |
Counter64 |
|
| |
jnxWxAppAggrStatsBytesOutRe |
Counter64 |
|
| |
jnxWxAppAggrStatsBytesInPercent |
Gauge32 |
|
| JuniperWxWanStatsEntry |
|
| SEQUENCE |
|
|
|
| |
jnxWxWanStatsBytesToWan |
Counter64 |
|
| |
jnxWxWanStatsBytesFromWan |
Counter64 |
|
| JnxWxAccelAppNameEntry |
|
| SEQUENCE |
|
|
|
| |
jnxWxAccelAppIndex |
Integer32 |
|
| |
jnxWxAccelAppName |
TcAppName |
|
| JnxWxAccelAppStatsEntry |
|
| SEQUENCE |
|
|
|
| |
jnxWxAccelAppTimeWithAccel |
Unsigned32 |
|
| |
jnxWxAccelAppTimeWithoutAccel |
Unsigned32 |
|
| JuniperWxQosEndptEntry |
|
| SEQUENCE |
|
|
|
| |
jnxWxQosEndptIndex |
Integer32 |
|
| |
jnxWxQosEndptIdentifier |
TcQosIdentifier |
|
| JuniperWxQosClassEntry |
|
| SEQUENCE |
|
|
|
| |
jnxWxQosClassIndex |
Integer32 |
|
| |
jnxWxQosClassName |
TcQosIdentifier |
|
| JuniperWxQosStatsEntry |
|
| SEQUENCE |
|
|
|
| |
jnxWxQosStatsBytesIn |
Counter64 |
|
| |
jnxWxQosStatsBytesOut |
Counter64 |
|
| |
jnxWxQosStatsBytesDropped |
Counter64 |
|
| |
jnxWxQosStatsPktsIn |
Counter64 |
|
| |
jnxWxQosStatsPktsOut |
Counter64 |
|
| |
jnxWxQosStatsPktsDropped |
Counter64 |
|
| JuniperWxWpEndptEntry |
|
| SEQUENCE |
|
|
|
| |
jnxWxWpEndptIndex |
Integer32 |
|
| |
jnxWxWpEndptIp |
IpAddress |
|
| JuniperWxWpStatsEntry |
|
| SEQUENCE |
|
|
|
| |
jnxWxWpStatsLatencyThresh |
Unsigned32 |
|
| |
jnxWxWpStatsAvgLatency |
Unsigned32 |
|
| |
jnxWxWpStatsLatencyCount |
Unsigned32 |
|
| |
jnxWxWpStatsLatencyAboveThresh |
Unsigned32 |
|
| |
jnxWxWpStatsLatencyAboveThreshCount |
Unsigned32 |
|
| |
jnxWxWpStatsLossPercent |
Unsigned32 |
|
| |
jnxWxWpStatsLossCount |
Unsigned32 |
|
| |
jnxWxWpStatsEventCount |
Unsigned32 |
|
| |
jnxWxWpStatsDiversionCount |
Unsigned32 |
|
| |
jnxWxWpStatsReturnCount |
Unsigned32 |
|
| |
jnxWxWpStatsLastDown |
Unsigned32 |
|
| |
jnxWxWpStatsUnavailableCount |
Unsigned32 |
|
| |
jnxWxWpStatsMinuteCount |
Unsigned32 |
|
Defined Values
| jnxWxMibModule |
1.3.6.1.4.1.8239.1.1.4 |
|
A MIB module containing definitions of managed objects
for Juniper Networks' WAN Acceleration family of products. |
| MODULE-IDENTITY |
|
|
|
| jnxWxMib |
1.3.6.1.4.1.8239.2.2.1 |
|
Sub-tree for WAN Acceleration MIB. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-IDENTITY |
|
|
|
| jnxWxConfMib |
1.3.6.1.4.1.8239.2.2.1.1 |
|
Sub-tree for WAN Acceleration MIB conformance statements. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-IDENTITY |
|
|
|
| jnxWxObjs |
1.3.6.1.4.1.8239.2.2.1.2 |
|
Sub-tree for WAN Acceleration MIB objects. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-IDENTITY |
|
|
|
| jnxWxEvents |
1.3.6.1.4.1.8239.2.2.1.3 |
|
Sub-tree for WAN Acceleration MIB events. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-IDENTITY |
|
|
|
| jnxWxStatsUpdateTime |
1.3.6.1.4.1.8239.2.2.1.2.1 |
| This is the value of sysUpTime when the WX stats (jnxWxSysStats,
jnxWxAsm, jnxWxApp) were last updated. The management station
can use this information to tell if it's downloading a consistent set
of stats. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeStamp |
|
|
| jnxWxStatsAsmCount |
1.3.6.1.4.1.8239.2.2.1.2.2 |
| The number of Decompressors this Compressor has had a session
with at any time during the last two months. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| jnxWxStatsAppCount |
1.3.6.1.4.1.8239.2.2.1.2.3 |
| The number of applications currently being monitored on this Compressor. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| jnxWxStatsAccelAppCount |
1.3.6.1.4.1.8239.2.2.1.2.8 |
| The number of applications currently being accelerated on this Compressor. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| jnxWxStatsQosClassCount |
1.3.6.1.4.1.8239.2.2.1.2.11 |
| The number of QoS classes currently being monitored on this Compressor. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| jnxWxStatsQosEndptCount |
1.3.6.1.4.1.8239.2.2.1.2.12 |
| The number of QoS endpoints currently being monitored on this Compressor. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| jnxWxStatsWpEndptCount |
1.3.6.1.4.1.8239.2.2.1.2.13 |
| Number of endpoints with WAN performance monitoring
enabled |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| jnxWxSysStats |
1.3.6.1.4.1.8239.2.2.1.2.4 |
|
Sub-tree for WAN Acceleration system statistics. |
| Status: current |
Access: read-only |
| OBJECT-IDENTITY |
|
|
|
| jnxWxSysStatsBytesInAe |
1.3.6.1.4.1.8239.2.2.1.2.4.1 |
| Total number of bytes that entered the WX Assembly Engine
since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsBytesOutAe |
1.3.6.1.4.1.8239.2.2.1.2.4.2 |
| Total number of bytes that exited the WX Assembly Engine
after assembly since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsPktsInAe |
1.3.6.1.4.1.8239.2.2.1.2.4.3 |
| Total number of packets that entered the WX Assembly Engine
since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsPktsOutAe |
1.3.6.1.4.1.8239.2.2.1.2.4.4 |
| Total number of packets that exited the WX Assembly Engine
after assembly since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsBytesOutOob |
1.3.6.1.4.1.8239.2.2.1.2.4.5 |
| Total number of out-of-band bytes sent to the control channel
since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsBytesPtNoAe |
1.3.6.1.4.1.8239.2.2.1.2.4.6 |
| Total number of bytes that passed through the WX Compression Engine
because there was no corresponding Assembly Engine WX, since the
system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsPktsPtNoAe |
1.3.6.1.4.1.8239.2.2.1.2.4.7 |
| Total number of packets that passed through the WX Compression Engine
because there was no corresponding Assembly Engine WX, since the
system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsBytesPtFilter |
1.3.6.1.4.1.8239.2.2.1.2.4.8 |
| Total number of bytes that passed through the WX Compression Engine
due to a manually configured filter (such as an application
filter), since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsPktsPtFilter |
1.3.6.1.4.1.8239.2.2.1.2.4.9 |
| Total number of packets that passed through the WX Compression Engine
due to a manually configured filter (such as an application
filter), since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsBytesOfPt |
1.3.6.1.4.1.8239.2.2.1.2.4.10 |
| Total number of bytes that passed through the WX Compression Engine
due to device buffer overflow, since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsPktsOfPt |
1.3.6.1.4.1.8239.2.2.1.2.4.11 |
| Total number of packets that passed through the WX Compression Engine
due to device buffer overflow, since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsBytesTpIn |
1.3.6.1.4.1.8239.2.2.1.2.4.12 |
| The number of bytes into the WX Compression Engine at the peak
five-second interval of data input, since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsPktsTpIn |
1.3.6.1.4.1.8239.2.2.1.2.4.13 |
| The number of packets into the WX Compression Engine at the peak
five-second interval of data input, since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsBytesTpOut |
1.3.6.1.4.1.8239.2.2.1.2.4.14 |
| The number of bytes out of the WX Compression Engine at the peak
five-second interval of data input, since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsPktsTpOut |
1.3.6.1.4.1.8239.2.2.1.2.4.15 |
| The number of packets out of the WX Compression Engine at the peak
five-second interval of data input, since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsBytesTpPt |
1.3.6.1.4.1.8239.2.2.1.2.4.16 |
| The number of bytes that passed through the WX Compression Engine
at the peak five-second interval of data input, since the system
was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsPktsTpPt |
1.3.6.1.4.1.8239.2.2.1.2.4.17 |
| The number of packets that passed through the WX Compression Engine
at the peak five-second interval of data input, since the system
was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsPeakRdn |
1.3.6.1.4.1.8239.2.2.1.2.4.18 |
| The maximum data reduction rate for a five second interval
in the last minute.
The value returned is (percentage * 1000). Applications should
divide the returned value by 1000. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| jnxWxSysStatsThruputIn |
1.3.6.1.4.1.8239.2.2.1.2.4.19 |
| Average throughput of incoming data in Kbps since the
system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| jnxWxSysStatsThruputOut |
1.3.6.1.4.1.8239.2.2.1.2.4.20 |
| Average throughput of outgoing data in Kbps since the
system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| jnxWxSysStatsBytesInRe |
1.3.6.1.4.1.8239.2.2.1.2.4.21 |
| Total number of bytes that entered the WX Compression Engine
since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsBytesOutRe |
1.3.6.1.4.1.8239.2.2.1.2.4.22 |
| Total number of bytes that exited the WX Compression Engine
after reduction since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsPktsInRe |
1.3.6.1.4.1.8239.2.2.1.2.4.23 |
| Total number of packets that entered the WX Compression Engine
since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxSysStatsPktsOutRe |
1.3.6.1.4.1.8239.2.2.1.2.4.24 |
| Total number of packets that exited the WX Compression Engine
after reduction since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxAsm |
1.3.6.1.4.1.8239.2.2.1.2.5 |
|
Information maintained by a Compressor for each Decompressor it has
a session with. |
| Status: current |
Access: read-only |
| OBJECT-IDENTITY |
|
|
|
| jnxWxAsmTable |
1.3.6.1.4.1.8239.2.2.1.2.5.1 |
| List of Decompressors the Compressor has sessions with. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
JuniperWxAsmEntry |
|
| jnxWxAsmEntry |
1.3.6.1.4.1.8239.2.2.1.2.5.1.1 |
| A row in jnxWxAsmTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
JuniperWxAsmEntry |
|
|
| jnxWxAsmIndex |
1.3.6.1.4.1.8239.2.2.1.2.5.1.1.1 |
| This row's number, with range (1..jnxWxStatsAsmCount). |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| jnxWxAsmIpAddress |
1.3.6.1.4.1.8239.2.2.1.2.5.1.1.2 |
| The IP address of the Decompressor. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| jnxWxAsmStatsTable |
1.3.6.1.4.1.8239.2.2.1.2.5.2 |
| Statistics maintained by a Compressor for each Decompressor it has
a session with. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
JuniperWxAsmStatsEntry |
|
| jnxWxAsmStatsEntry |
1.3.6.1.4.1.8239.2.2.1.2.5.2.1 |
| A row in jnxWxAsmStatsTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
JuniperWxAsmStatsEntry |
|
|
| jnxWxAsmStatsPktsIn |
1.3.6.1.4.1.8239.2.2.1.2.5.2.1.1 |
| The total number of packets into this WX, since
the system was started, that were identified for
reduction and addressed to the WX whose IP address
is in the row in jnxWxAsmTable that matches
this row. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxAsmStatsPktsOut |
1.3.6.1.4.1.8239.2.2.1.2.5.2.1.2 |
| The total number of packets out of this WX, since
the system was started, that were identified for
reduction and addressed to the WX whose IP address
is in the row in jnxWxAsmTable that matches
this row. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxAsmStatsBytesIn |
1.3.6.1.4.1.8239.2.2.1.2.5.2.1.3 |
| The total number of bytes into this WX, since
the system was started, that were identified for
reduction and addressed to the WX whose IP address
is in the row in jnxWxAsmTable that matches
this row. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxAsmStatsBytesOut |
1.3.6.1.4.1.8239.2.2.1.2.5.2.1.4 |
| The total number of bytes out of this WX, since
the system was started, that were identified for
reduction and addressed to the WX whose IP address
is in the row in jnxWxAsmTable that matches
this row. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxVirtEndptEntry |
1.3.6.1.4.1.8239.2.2.1.2.5.3.1 |
| A row in jnxWxVirtEndptTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
JnxWxVirtEndptEntry |
|
|
| jnxWxVirtEndptIndex |
1.3.6.1.4.1.8239.2.2.1.2.5.3.1.1 |
| A row's number, with range (1..jnxWxStatsVirtEndptCount) |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| jnxWxVirtEndptName |
1.3.6.1.4.1.8239.2.2.1.2.5.3.1.2 |
| The name of the configured virtual endpoint |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TcAppName |
|
|
| jnxWxVirtEndptSubnetCount |
1.3.6.1.4.1.8239.2.2.1.2.5.3.1.3 |
| The number of subnets associated with this
virtual endpoint |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| jnxWxApp |
1.3.6.1.4.1.8239.2.2.1.2.6 |
|
Information maintained by a Compressor for each application
that is monitored. |
| Status: current |
Access: read-only |
| OBJECT-IDENTITY |
|
|
|
| jnxWxAppTable |
1.3.6.1.4.1.8239.2.2.1.2.6.1 |
| List of applications currently monitored. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
JuniperWxAppEntry |
|
| jnxWxAppEntry |
1.3.6.1.4.1.8239.2.2.1.2.6.1.1 |
| A row in jnxWxAppTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
JuniperWxAppEntry |
|
|
| jnxWxAppIndex |
1.3.6.1.4.1.8239.2.2.1.2.6.1.1.1 |
| This row's number, with range (1..jnxWxStatsAppCount). |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| jnxWxAppAppName |
1.3.6.1.4.1.8239.2.2.1.2.6.1.1.2 |
| The name of the application from which the data was
received (e.g., FTP, HTTP, Lotus Notes). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TcAppName |
|
|
| jnxWxAppStatsTable |
1.3.6.1.4.1.8239.2.2.1.2.6.2 |
| Statistics maintained by a Compressor for each application
that is monitored. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
JuniperWxAppStatsEntry |
|
| jnxWxAppStatsEntry |
1.3.6.1.4.1.8239.2.2.1.2.6.2.1 |
| A row in jnxWxAppStatsTable.
Note that the indices are from jnxWxAsmTable and
jnxWxAppTable. For each Decompressor this compressor has
a session with (indexed by jnxWxAsmIndex), statistics
are maintained for each application that is monitored
(indexed by jnxWxAppIndex). |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
JuniperWxAppStatsEntry |
|
|
| jnxWxAppStatsBytesIn |
1.3.6.1.4.1.8239.2.2.1.2.6.2.1.1 |
| The total number of bytes into the WX, since the system
was started, that were identified for reduction,
and addressed to the WX whose IP address is in the
row in jnxWxAsmTable that matches the index
jnxWxAsmIndex, and that was received from the
application whose name is in the row in jnxWxAppTable
that matches the index jnxWxAppIndex. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxAppStatsBytesOut |
1.3.6.1.4.1.8239.2.2.1.2.6.2.1.2 |
| The total number of bytes out of the WX, since the
system was started, that were identified for reduction,
and addressed to the WX whose IP address is in the
row in jnxWxAsmTable that matches the index
jnxWxAsmIndex, and that was received from the
application whose name is in the row in jnxWxAppTable. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxAppStatsBytesInPercent |
1.3.6.1.4.1.8239.2.2.1.2.6.2.1.3 |
| The percentage of the bytes in for this application
over the total bytes into the WX, since the system
was started, that were identified for reduction,
and addressed to the WX whose IP address is in the
row in jnxWxAsmTable that matches the index
jnxWxAsmIndex, and that was received from the
application whose name is in the row in jnxWxAppTable
that matches the index jnxWxAppIndex.
The value returned is (percentage * 1000). Applications should
divide the returned value by 1000. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| jnxWxAppStatsAppName |
1.3.6.1.4.1.8239.2.2.1.2.6.2.1.4 |
| The name of the application from which the data was
received (e.g., FTP, HTTP, Lotus Notes).
NOTE: This object is here even though it's also in
jnxWxAppTable. This is for the convenience of network
monitoring tools that require all columns to be from the
same table. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TcAppName |
|
|
| jnxWxAppAggrStatsTable |
1.3.6.1.4.1.8239.2.2.1.2.6.3 |
| Aggregate statistics maintained by a Compressor for each application
that is monitored. These statistics apply to the compressor as a whole
and are summed over all decompressor sessions maintained by the compressor. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
JuniperWxAppAggrStatsEntry |
|
| jnxWxAppAggrStatsEntry |
1.3.6.1.4.1.8239.2.2.1.2.6.3.1 |
| A row in jnxWxAppAggrStatsTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
JuniperWxAppAggrStatsEntry |
|
|
| jnxWxAppAggrStatsBytesInRe |
1.3.6.1.4.1.8239.2.2.1.2.6.3.1.1 |
| Total number of bytes that entered the WX Compression Engine
for this application since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxAppAggrStatsBytesOutRe |
1.3.6.1.4.1.8239.2.2.1.2.6.3.1.2 |
| Total number of bytes that exited the WX Compression Engine
after reduction for this application since the system was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxAppAggrStatsBytesInPercent |
1.3.6.1.4.1.8239.2.2.1.2.6.3.1.3 |
| The percentage of the bytes in for this application over the
total bytes into the WX Compression Engine.
The value returned is (percentage * 1000). Applications should
divide the returned value by 1000. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| jnxWxWanStatsEntry |
1.3.6.1.4.1.8239.2.2.1.2.6.4.1 |
| A row in jnxWxWanStatsTable.
Note that the indices are from jnxWxAsmTable and
jnxWxAppTable. For each Decompressor this compressor has
a session with (indexed by jnxWxAsmIndex), statistics
are maintained for each application that is monitored
(indexed by jnxWxAppIndex). |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
JuniperWxWanStatsEntry |
|
|
| jnxWxWanStatsBytesToWan |
1.3.6.1.4.1.8239.2.2.1.2.6.4.1.1 |
| Total number of bytes sent to the wan on a per
application basis |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxWanStatsBytesFromWan |
1.3.6.1.4.1.8239.2.2.1.2.6.4.1.2 |
| Total number of bytes received from the WAN
on a per application basis |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxAccelAppNameEntry |
1.3.6.1.4.1.8239.2.2.1.2.6.5.1 |
| A row in jnxWxAccelAppNameTable. Each row contains
the name of an application that can be accelerated. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
JnxWxAccelAppNameEntry |
|
|
| jnxWxAccelAppIndex |
1.3.6.1.4.1.8239.2.2.1.2.6.5.1.1 |
| This row's number, with range (1..jnxWxStatsAccelAppCount). |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| jnxWxAccelAppName |
1.3.6.1.4.1.8239.2.2.1.2.6.5.1.2 |
| The name of the application from which the data was
received (e.g., FTP, HTTP, Lotus Notes). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TcAppName |
|
|
| jnxWxAccelAppStatsTable |
1.3.6.1.4.1.8239.2.2.1.2.6.6 |
| Accelerated application performance statistics. Includes
time with and without acceleration in seconds |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
JnxWxAccelAppStatsEntry |
|
| jnxWxAccelAppStatsEntry |
1.3.6.1.4.1.8239.2.2.1.2.6.6.1 |
| A row in jnxWxAccelAppStatsTable. Indices are from
jnxWxAsmTable and jnxWxAccelAppNameTable. For each Decompressor
this compressor has a session with (indexed by jnxWxAsmIndex),
statistics are maintained for each application that is
accelereated (indexed by jnxWxAccelAppIndex) |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
JnxWxAccelAppStatsEntry |
|
|
| jnxWxAccelAppTimeWithAccel |
1.3.6.1.4.1.8239.2.2.1.2.6.6.1.3 |
| Total number of seconds required to complete all
transactions with acceleration enabled. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| jnxWxAccelAppTimeWithoutAccel |
1.3.6.1.4.1.8239.2.2.1.2.6.6.1.4 |
| Total number of seconds that would be required to
complete all transactions if acceleration was disabled. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| jnxWxBurstStats |
1.3.6.1.4.1.8239.2.2.1.2.7 |
|
Sub-tree for WAN Acceleration system statistics. |
| Status: current |
Access: read-only |
| OBJECT-IDENTITY |
|
|
|
| jnxWxBurstStatsStartTime |
1.3.6.1.4.1.8239.2.2.1.2.7.1 |
| The start of the minute in seconds since
midnight (00:00:00), January 1, 1970, UTC
over which the burst stats apply. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| jnxWxBurstStatsBpsIn |
1.3.6.1.4.1.8239.2.2.1.2.7.2 |
| Burst bits per second into reduction engine for the past minute. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| jnxWxBurstStatsBpsOut |
1.3.6.1.4.1.8239.2.2.1.2.7.3 |
| Burst bits per second out of reduction engine for the past minute. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| jnxWxBurstStatsBpsPt |
1.3.6.1.4.1.8239.2.2.1.2.7.4 |
| Burst pass-through bits per second for the past minute. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| jnxWxQos |
1.3.6.1.4.1.8239.2.2.1.2.10 |
|
Information maintained by a Compressor for each QoS class
that is monitored. |
| Status: current |
Access: read-only |
| OBJECT-IDENTITY |
|
|
|
| jnxWxQosEndptEntry |
1.3.6.1.4.1.8239.2.2.1.2.10.1.1 |
| A row in jnxWxQosEndptTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
JuniperWxQosEndptEntry |
|
|
| jnxWxQosEndptIndex |
1.3.6.1.4.1.8239.2.2.1.2.10.1.1.1 |
| This row's number, with range (1..jnxWxStatsQosEndptCount). |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| jnxWxQosClassEntry |
1.3.6.1.4.1.8239.2.2.1.2.10.2.1 |
| A row in the jnxWxQosClassTable |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
JuniperWxQosClassEntry |
|
|
| jnxWxQosClassIndex |
1.3.6.1.4.1.8239.2.2.1.2.10.2.1.1 |
| This row's number, with range (1..jnxWxStatsQosClassCount). |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| jnxWxQosStatsEntry |
1.3.6.1.4.1.8239.2.2.1.2.10.3.1 |
| A row in the jnxWxQosStatsTable. Indexed by
decompressor and the corresponding QoS class.
Statistics are maintained per endpoint
(indexed by jnxWxQosEndptIndex) and per QoS
class associated with the endpoint (indexed
by jnxWxQosClassIndex) |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
JuniperWxQosStatsEntry |
|
|
| jnxWxQosStatsBytesIn |
1.3.6.1.4.1.8239.2.2.1.2.10.3.1.3 |
| Total number of bytes received from the WAN
on a per class basis |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxQosStatsBytesOut |
1.3.6.1.4.1.8239.2.2.1.2.10.3.1.4 |
| Total number of bytes sent to the WAN on a per
class basis |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxQosStatsPktsIn |
1.3.6.1.4.1.8239.2.2.1.2.10.3.1.6 |
| Total number of packets received from the WAN
on a per class basis |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxQosStatsPktsOut |
1.3.6.1.4.1.8239.2.2.1.2.10.3.1.7 |
| Total number of packets sent to the wan on a per
class basis |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxQosStatsPktsDropped |
1.3.6.1.4.1.8239.2.2.1.2.10.3.1.8 |
| Total number of packets dropped
on a per class basis |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| jnxWxWanPerf |
1.3.6.1.4.1.8239.2.2.1.2.14 |
|
|
| Status: current |
Access: read-only |
| OBJECT-IDENTITY |
|
|
|
| jnxWxWpEndptEntry |
1.3.6.1.4.1.8239.2.2.1.2.14.1.1 |
| Tok_String |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
JuniperWxWpEndptEntry |
|
|
| jnxWxWpEndptIp |
1.3.6.1.4.1.8239.2.2.1.2.14.1.1.2 |
| Tok_String |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| jnxWxWpStatsEntry |
1.3.6.1.4.1.8239.2.2.1.2.14.2.1 |
| Tok_String |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
JuniperWxWpStatsEntry |
|
|
| jnxWxEventObjs |
1.3.6.1.4.1.8239.2.2.1.3.1 |
|
Branch for objects meant only to be sent in event varbinds. |
| Status: current |
Access: read-only |
| OBJECT-IDENTITY |
|
|
|
| jnxWxEventEvents |
1.3.6.1.4.1.8239.2.2.1.3.2 |
|
Branch for the events themselves. |
| Status: current |
Access: read-only |
| OBJECT-IDENTITY |
|
|
|
| jnxWxEventEventsV2 |
1.3.6.1.4.1.8239.2.2.1.3.2.0 |
|
Branch for SNMPv2 events. The OIDs for SNMPv2 events should
have a zero as the next-to-last sub-identifier (as specified
in RFC1902). |
| Status: current |
Access: read-only |
| OBJECT-IDENTITY |
|
|
|
| jnxWxEventRipAuthFailure |
1.3.6.1.4.1.8239.2.2.1.3.2.0.1 |
| RIP authentication failure |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventCompressionBufferOverflow |
1.3.6.1.4.1.8239.2.2.1.3.2.0.2 |
| The compressor's input buffer is approaching full capacity.
This trap is currently unused. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventCompressionSessionClosed |
1.3.6.1.4.1.8239.2.2.1.3.2.0.3 |
| The compressor's session to the device described in
jnxWxCommonEventDescr was terminated. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventDecompressionSessionClosed |
1.3.6.1.4.1.8239.2.2.1.3.2.0.4 |
| The decompressor's session to the device described in
jnxWxCommonEventDescr was terminated. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventCompressionSessionOpened |
1.3.6.1.4.1.8239.2.2.1.3.2.0.5 |
| The compressor's session to the device described in
jnxWxCommonEventDescr was opened. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventDecompressionSessionOpened |
1.3.6.1.4.1.8239.2.2.1.3.2.0.6 |
| The decompressor's session to the device described in
jnxWxCommonEventDescr was opened. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventMultiNodeMasterUp |
1.3.6.1.4.1.8239.2.2.1.3.2.0.9 |
| The system designated as the 'master' of a multi-node
came up. This notification is generated by the
system that's designated as the 'master' of the
multi-node.
Note that the corresponding Down notification is
generated by the designated 'master-backup' of the
same multi-node.
This trap is currently unused. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventMultiNodeMasterDown |
1.3.6.1.4.1.8239.2.2.1.3.2.0.10 |
| The system designated as the 'master' of a multi-node
is currently down. This notification is generated by the
system that's designated as the 'master-backup' of the
same multi-node.
Note that the corresponding Up notification is
generated by the designated 'master' of the same
multi-node.
This trap is currently unused. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventMultiNodeLastUp |
1.3.6.1.4.1.8239.2.2.1.3.2.0.11 |
| The system designated as the 'last-node' of a multi-node
came up. This notification is generated by the
system that's designated as the 'last-node' of the
multi-node.
Note that the corresponding Down notification is
generated by the designated 'master' of the
same multi-node.
This trap is currently unused. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventMultiNodeLastDown |
1.3.6.1.4.1.8239.2.2.1.3.2.0.12 |
| The system designated as the 'last-node' of a multi-node
is currently down. This notification is generated by the
system that's designated as the 'master' of the
same multi-node.
Note that the corresponding Up notification is
generated by the designated 'last-node' of the same
multi-node.
This trap is currently unused. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventPrimaryDownBackupEngaged |
1.3.6.1.4.1.8239.2.2.1.3.2.0.13 |
| The system designated as the 'primary' is currently
unreachable. This notification is generated by the
system that's designated as the 'backup' device.
The backup device is engaged for the primary device. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventPrimaryDownBackupEngageFailed |
1.3.6.1.4.1.8239.2.2.1.3.2.0.14 |
| The system designated as the 'primary' is currently
unreachable. This notification is generated by the
system that's designated as the 'backup' device.
The backup device failed to engage for the primary device. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventPrimaryUpBackupDisengaged |
1.3.6.1.4.1.8239.2.2.1.3.2.0.15 |
| The system designated as the 'primary' is currently
reachable. This notification is generated by the
system that's designated as the 'backup' device.
The backup device has disengaged itself. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventMultiPathStatusChange |
1.3.6.1.4.1.8239.2.2.1.3.2.0.16 |
| The status of the primary or secondary path to another
multi-path enabled system changed. The path became inactive
or failed after previously being active or vice versa.
This might have caused traffic designated to flow over
this path to be switched from or to this path. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventDiskFailure |
1.3.6.1.4.1.8239.2.2.1.3.2.0.17 |
| A hard disk failed on the system. The system was rebooted,
and will now operate without the downed disk, at a degraded
performance. Dictionary accumulated until this point was lost. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventWanPerfStatusChange |
1.3.6.1.4.1.8239.2.2.1.3.2.0.18 |
| The status of the Path on which WAN Performance Monitoring is
enabled has changed. The performance of the path has changed either
from acceptable to unacceptable or vice versa. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventDCQAboveHiWatermark |
1.3.6.1.4.1.8239.2.2.1.3.2.0.19 |
| The decompression queue has reached the high watermark. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventDCQBelowHiWatermark |
1.3.6.1.4.1.8239.2.2.1.3.2.0.20 |
| The decompression queue has fallen below the high watermark. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventClientLinkDown |
1.3.6.1.4.1.8239.2.2.1.3.2.0.22 |
| Link to the Client went down. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| jnxWxEventClientLinkUp |
1.3.6.1.4.1.8239.2.2.1.3.2.0.23 |
| Link to the client came up. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|