JUNIPER-TIMING-NOTFNS-MIB
File:
JUNIPER-TIMING-NOTFNS-MIB.mib (33806 bytes)
Imported modules
Imported symbols
Defined Types
JnxClksyncSynceQualityEntry |
|
SEQUENCE |
|
|
|
|
jnxClksyncSynceQualityTableIndex |
Integer32 |
|
|
jnxClksyncSynceQualityintfName |
DisplayString |
|
|
jnxClksyncSynceQualityValue |
DisplayString |
|
Defined Values
jnxTimingNotfnsMIB |
1.3.6.1.4.1.2636.3.75.1 |
This is Juniper Networks' implementation of enterprise
specific MIB for alarms from the router chassis box. |
MODULE-IDENTITY |
|
|
|
jnxClksyncState |
1.3.6.1.4.1.2636.3.75.1.3.1 |
Fault status. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
clear(0), set(1) |
|
jnxAcbFpgaRevMajor |
1.3.6.1.4.1.2636.3.75.1.3.4 |
Major version information. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
jnxAcbFpgaRevMinor |
1.3.6.1.4.1.2636.3.75.1.3.5 |
Minor version information. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
jnxClksyncQualityCode |
1.3.6.1.4.1.2636.3.75.1.3.8 |
SSM/ESMC quality levels. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
prc(2), ssu-a(4), ssu-b(8), sec(11), dnu(15), prs(1), stu(0), st2(7), tnc(16), st3e(13), st3(10), smc(12), st4(14), dus(17) |
|
jnxClksyncDpllState |
1.3.6.1.4.1.2636.3.75.1.3.9 |
BITS/SyncE DPLL states. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(-1), lock-acq(0), locked(1), holder(2), freerun(3) |
|
jnxPtpServoState |
1.3.6.1.4.1.2636.3.75.1.3.10 |
PTP servo states. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
init(0), free-run(1), holdover(2), acquiring(3), freq-locked(4), phase-aligned(5) |
|
jnxPtpClass |
1.3.6.1.4.1.2636.3.75.1.3.11 |
PTP clock status. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
jnxPtpAccuracy |
1.3.6.1.4.1.2636.3.75.1.3.12 |
PTP clock accuracy. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
jnxPtpGmId |
1.3.6.1.4.1.2636.3.75.1.3.13 |
PTP Grand Master clock-id. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
JnxPtpClockIdTC |
|
|
jnxPtpGmIpAddr |
1.3.6.1.4.1.2636.3.75.1.3.14 |
PTP Grand Master stream ip-address. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
InetAddress |
|
|
jnxClkStreamHandle |
1.3.6.1.4.1.2636.3.75.1.3.15 |
PTP clock accuracy. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
jnxRemoteIpAddr |
1.3.6.1.4.1.2636.3.75.1.3.16 |
PTP clock stream's remote ip-address. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
InetAddress |
|
|
jnxClksyncHybridState |
1.3.6.1.4.1.2636.3.75.1.3.17 |
hybrid states. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
init(0), freq-acq(1), freqLck-phaseAcq1(2), freqLck-phaseAcq2(3), freqLck-phaseAcq3(4), freq-phase-lck(5) |
|
jnxPtpUtcValid |
1.3.6.1.4.1.2636.3.75.1.3.30 |
PTP UTC Offset Valid. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
no(0), yes(1) |
|
jnxTimingFrequencyTraceability |
1.3.6.1.4.1.2636.3.75.1.3.33 |
Frequency Tracable Flag. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
clear(0), set(1) |
|
jnxTimingTimeTraceability |
1.3.6.1.4.1.2636.3.75.1.3.34 |
Time Tracable Flag. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
clear(0), set(1) |
|
jnxClksyncSynceQualityEntry |
1.3.6.1.4.1.2636.3.75.1.3.29.1 |
Synce Table to get Quality metrics for all configured sources |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
JnxClksyncSynceQualityEntry |
|
|
jnxTimingFaultLOSSet |
1.3.6.1.4.1.2636.3.75.1.1.1 |
A trap which signifies that Loss Of Signal has been detected.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingFaultLOSClear |
1.3.6.1.4.1.2636.3.75.1.1.2 |
A trap which signifies that Loss Of Signal has been cleared.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingFaultEFDSet |
1.3.6.1.4.1.2636.3.75.1.1.3 |
A trap which signifies Exceeded frequency deviation.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingFaultEFDClear |
1.3.6.1.4.1.2636.3.75.1.1.4 |
A trap which signifies Exceeded frequency deviation cleared.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingFaultLOESMCSet |
1.3.6.1.4.1.2636.3.75.1.1.5 |
A trap which signifies Loss of ESMC is set.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingFaultLOESMCClear |
1.3.6.1.4.1.2636.3.75.1.1.6 |
A trap which signifies Loss of ESMC is cleared.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingFaultQLFailSet |
1.3.6.1.4.1.2636.3.75.1.1.7 |
A trap which signifies ESMC/SSM Quality Level failed is set.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingFaultQLFailClear |
1.3.6.1.4.1.2636.3.75.1.1.8 |
A trap which signifies ESMC/SSM Quality Level failed is cleared.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingFaultLTISet |
1.3.6.1.4.1.2636.3.75.1.1.9 |
A trap which signifies Loss of timing information is set.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingFaultLTIClear |
1.3.6.1.4.1.2636.3.75.1.1.10 |
A trap which signifies Loss of timing information is cleared.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingFaultAcbcFpgaVerNotCompatible |
1.3.6.1.4.1.2636.3.75.1.1.11 |
A trap which signifies ACBC FPGA version is not compatible.
jnxBootCpldFpgaRevMajor indicates the current ACBC FPGA Major revision
jnxBootCpldFpgaRevMinor indicates the current ACBC FPGA Minor revision. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingFaultBootCpldVerNotCompatible |
1.3.6.1.4.1.2636.3.75.1.1.12 |
A trap which signifies Boot-cpld version is not compatible.
jnxClksyncVersion indicates the current Boot-cpld version. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingFaultPriSrcFailed |
1.3.6.1.4.1.2636.3.75.1.1.13 |
A trap which signifies Primary source failed
(Whenever PFM/CFM/SCM error occurs).
jnxClksyncIfIndex is the Primary source interface index
jnxClksyncIntfName is the Primary source interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingFaultSecSrcFailed |
1.3.6.1.4.1.2636.3.75.1.1.14 |
A trap which signifies Secondary source failed
(Whenever PFM/CFM/SCM error occurs).
jnxClksyncIfIndex is the Secondary source interface index
jnxClksyncIntfName is the Secondary source interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingFaultPtpUniNegRateRejectSet |
1.3.6.1.4.1.2636.3.75.1.1.15 |
A trap which signifies:
When acting as MASTER - Failing/rejecting clients for signaling messages
When acting as SLAVE - Failing or receiving rejection for signaling messages
jnxClkStreamHandle is the clock stream handle
jnxRemoteIpAddr is the clock stream's remote ip-address. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingFaultPtpUniNegRateRejectClear |
1.3.6.1.4.1.2636.3.75.1.1.16 |
A trap which signifies:
When acting as MASTER - Failing/rejecting clients for signaling messages
When acting as SLAVE - Failing or receiving rejection for signaling messages
jnxClkStreamHandle is the clock stream handle
jnxRemoteIpAddr is the clock stream's remote ip-address. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventPriSrcRecovered |
1.3.6.1.4.1.2636.3.75.1.2.1 |
A trap which signifies Primary source recovered.
jnxClksyncIfIndex is the Primary source interface index
jnxClksyncIntfName is the Primary source interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventSecSrcRecovered |
1.3.6.1.4.1.2636.3.75.1.2.2 |
A trap which signifies Secondary source recovered.
jnxClksyncIfIndex is the Secondary source interface index
jnxClksyncIntfName is the Secondary source interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventPriRefChanged |
1.3.6.1.4.1.2636.3.75.1.2.3 |
A trap which signifies Primary reference changed
(Ifd name change or change from synce to BITS/external interface etc).
jnxClksyncIfIndex is the Primary reference interface index
jnxClksyncIntfName is the Primary reference interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventSecRefChanged |
1.3.6.1.4.1.2636.3.75.1.2.4 |
A trap which signifies Secondary reference changed
(Ifd name change or change from synce to BITS/external interface etc).
jnxClksyncIfIndex is the Secondary reference interface index
jnxClksyncIntfName is the Secondary reference interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventQLChangedRx |
1.3.6.1.4.1.2636.3.75.1.2.5 |
A trap which signifies RX SSM/ESMC quality level changed.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name
jnxClksyncQualityCode is the SSM/ESMC quality level
jnxClksyncQualityCodeStr is the SSM/ESMC quality level in string format. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventQLChangedTx |
1.3.6.1.4.1.2636.3.75.1.2.6 |
A trap which signifies TX SSM/ESMC quality level changed.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name
jnxClksyncQualityCode is the SSM/ESMC quality level
jnxClksyncQualityCodeStr is the SSM/ESMC quality level in string format. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventSynceHldovrToLck |
1.3.6.1.4.1.2636.3.75.1.2.7 |
A trap which signifies SyncE Holdover to Locked EEC state.
jnxClksyncIfIndex is the SyncE interface index
jnxClksyncIntfName is the SyncE interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventSynceLckToHldovr |
1.3.6.1.4.1.2636.3.75.1.2.8 |
A trap which signifies SyncE Locked to Holdover EEC state.
jnxClksyncIfIndex is the SyncE interface index
jnxClksyncIntfName is the SyncE interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventDpllStatus |
1.3.6.1.4.1.2636.3.75.1.2.9 |
A trap which signifies that DPLL state change
(unknown, lock_acq, locked, holder, freerun).
jnxClksyncDpllState indicates the Dpll status
jnxClksyncDpllStateStr indicates the Dpll status in string format. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventSynceDpllStatus |
1.3.6.1.4.1.2636.3.75.1.2.10 |
A trap which signifies that Synce DPLL state change
(unknown, lock_acq, locked, holder, freerun).
jnxClksyncIfIndex is the interface index from which Frequency is derived
jnxClksyncIntfName is the interface name from which Frequency is derived
jnxClksyncDpllState indicates the Dpll status
jnxClksyncDpllStateStr indicates the Dpll status in string format. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventBitsDpllStatus |
1.3.6.1.4.1.2636.3.75.1.2.11 |
A trap which signifies that Synce DPLL state change
(unknown, lock_acq, locked, holder, freerun).
jnxClksyncIfIndex is the interface index from which Frequency is derived
jnxClksyncIntfName is the interface name from which Frequency is derived
jnxClksyncDpllState indicates the Dpll status
jnxClksyncDpllStateStr indicates the Dpll status in string format. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventPtpServoStatus |
1.3.6.1.4.1.2636.3.75.1.2.12 |
A trap which signifies that PTP servo state
(Init, Acquiring, PhaseAligned, FreeRun, Holdover).
jnxPtpServoState indicates the ptp servo status
jnxPtpServoStateStr indicates the ptp servo status in string format. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventPtpGMClockClassChange |
1.3.6.1.4.1.2636.3.75.1.2.13 |
A trap which signifies PTP clock class changes.
jnxPtpGmId indicates the ptp Grand Master clock-id
jnxPtpClass indicates the ptp Grand Master clock status. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventPtpGMClockAccuracyChange |
1.3.6.1.4.1.2636.3.75.1.2.14 |
A trap which signifies PTP clock accuracy changes.
jnxPtpGmId indicates the ptp Grand Master clock-id
jnxPtpAccuracy indicates the ptp Grand Master clock accuracy. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventPtpGMChange |
1.3.6.1.4.1.2636.3.75.1.2.15 |
A trap which signifies PTP Grand Master changes.
jnxPtpGmId indicates the ptp Grand Master clock-id. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventHybridStatus |
1.3.6.1.4.1.2636.3.75.1.2.16 |
A trap which signifies that Hybrid state
(Init, FreqAcq, FreqLckPhaseAcq, FreqPhaseLck).
jnxClksyncHybridState indicates the hybrid status
jnxClksyncHybridStateStr indicates the hybrid status in string format. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventSquelchSet |
1.3.6.1.4.1.2636.3.75.1.1.17 |
A trap which signifies that interface status changed to squelched.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventSquelchClear |
1.3.6.1.4.1.2636.3.75.1.1.18 |
A trap which signifies that interface status changed to active.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingEventLedColorChange |
1.3.6.1.4.1.2636.3.75.1.2.19 |
A trap which signifies TX SSM/ESMC quality level changed.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name
jnxClksyncColorStr is the color of the LED unit. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
jnxTimingCompliance |
1.3.6.1.4.1.2636.3.75.1.4.1.1 |
The compliance statement for systems supporting
the Timing Notification MIB. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
jnxTimingObjectsGroup |
1.3.6.1.4.1.2636.3.75.1.4.2.1 |
Timing objects group. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
jnxTimingNotfnFaultsGroup |
1.3.6.1.4.1.2636.3.75.1.4.2.2 |
Timing defects notification group. |
Status: current |
Access: read-only |
NOTIFICATION-GROUP |
|
|
|
jnxTimingNotfnEventsGroup |
1.3.6.1.4.1.2636.3.75.1.4.2.3 |
Timing events notification group. |
Status: current |
Access: read-only |
NOTIFICATION-GROUP |
|
|
|